mibs/MIBS/juniper/JUNIPER-WX-COMMON-MIB
2023-12-05 12:25:34 +01:00

379 lines
11 KiB
Plaintext

-- End - JUNIPER-WX-GLOBAL-TC Module
-- ========================================================================
-- Start - JUNIPER-WX-COMMON-MIB Module
-- MIB for the common MIB objects implemented by all
-- WX devices.
--
-- The convention described in "Understanding SNMP MIBs"
-- (David Perkins, Evan McGinnis), Chapter 8, has generally been followed.
JUNIPER-WX-COMMON-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-IDENTITY,
OBJECT-TYPE, NOTIFICATION-TYPE,
Integer32
FROM SNMPv2-SMI
-- MODULE-COMPLIANCE, OBJECT-GROUP
-- FROM SNMPv2-CONF
DisplayString, TruthValue
FROM SNMPv2-TC
TcChassisType
FROM JUNIPER-WX-GLOBAL-TC
jnxWxModules, jnxWxCommonMib
FROM JUNIPER-WX-GLOBAL-REG;
jnxWxCommonMibModule MODULE-IDENTITY
LAST-UPDATED "200206030000Z"
ORGANIZATION "Juniper Networks, Inc"
CONTACT-INFO "
Customer Support
Juniper Networks, Inc.
1194 North Mathilda Avenue
Sunnyvale, CA 94089
+1 888-314-JTAC
support@juniper.net"
DESCRIPTION "
A MIB module containing definitions of managed objects
implemented by all Juniper Networks' products."
REVISION "200309300845Z"
DESCRIPTION "
Fix minor error in description of jnxWxSysDaylightSaving."
REVISION "200304010000Z"
DESCRIPTION "
Add interface duplex mismatch notification."
REVISION "200303100000Z"
DESCRIPTION "
Add interface speed mismatch notifications."
REVISION "200206030000Z"
DESCRIPTION "
Add Fan notifications."
REVISION "200203270000Z"
DESCRIPTION "
Add FaultTolerantPassthrough notification."
REVISION "200202220000Z"
DESCRIPTION "
Add LoginFailure notification."
REVISION "200201230000Z"
DESCRIPTION "
Add LicenseWillExpire notification."
REVISION "200201170000Z"
DESCRIPTION "
Add ThruputLimitExceeded notification."
REVISION "200108070000Z"
DESCRIPTION "
Rev 1.0
Initial version of MIB module JUNIPER-WX-COMMON-MIB."
::= { jnxWxModules 3 }
jnxWxCommonConfMib OBJECT-IDENTITY
STATUS current
DESCRIPTION "
Sub-tree for WAN Acceleration MIB conformance statements."
::= { jnxWxCommonMib 1 }
jnxWxCommonObjs OBJECT-IDENTITY
STATUS current
DESCRIPTION "
Sub-tree for common MIB objects."
::= { jnxWxCommonMib 2 }
jnxWxCommonEvents OBJECT-IDENTITY
STATUS current
DESCRIPTION "
Sub-tree for common MIB events."
::= { jnxWxCommonMib 3 }
-- Top level groups
jnxWxSys OBJECT-IDENTITY
STATUS current
DESCRIPTION "
Sub-tree for common system objects."
::= { jnxWxCommonObjs 1 }
jnxWxChassis OBJECT-IDENTITY
STATUS current
DESCRIPTION "
Sub-tree for common chassis information."
::= { jnxWxCommonObjs 2 }
----------------------------------------------------------------------
-- System objects
jnxWxSysSwVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Full software version. The first two components of the full
version are the major and minor versions. The third component
indicates the maintenance release number and the fourth,
the build number."
::= { jnxWxSys 1 }
jnxWxSysHwVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Hardware version of the unit."
::= { jnxWxSys 2 }
jnxWxSysSerialNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The serial number of the unit. If not available,
an empty string is returned."
::= { jnxWxSys 3 }
jnxWxSysTimeZoneOffset OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The offset in seconds from UTC of the system's time zone.
Values are negative for locations west of UTC and positive
for locations east of UTC."
::= { jnxWxSys 4 }
jnxWxSysDaylightSaving OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether daylight savings are currently in effect for the
system's time zone."
::= { jnxWxSys 5 }
----------------------------------------------------------------------
-- Chassis
jnxWxChassisType OBJECT-TYPE
SYNTAX TcChassisType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Chassis type for this WX device."
::= { jnxWxChassis 1 }
----------------------------------------------------------------------
-- Events
jnxWxCommonEventObjs OBJECT-IDENTITY
STATUS current
DESCRIPTION "
Branch for objects meant only to be sent in event varbinds."
::= { jnxWxCommonEvents 1 }
jnxWxCommonEventEvents OBJECT-IDENTITY
STATUS current
DESCRIPTION "
Branch for the events themselves."
::= { jnxWxCommonEvents 2 }
jnxWxCommonEventEventsV2 OBJECT-IDENTITY
STATUS current
DESCRIPTION "
Branch for SNMPv2 events. The OIDs for SNMPv2 events should
have a zero as the next-to-last sub-identifier (as specified
in RFC1902)."
::= { jnxWxCommonEventEvents 0 }
-- Objects sent only in events
jnxWxCommonEventDescr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"String that provides a textual description of the event."
::= { jnxWxCommonEventObjs 1 }
-- Event descriptions
jnxWxCommonEventInFailSafeMode NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"This trap is sent when the device boots up in fail-safe mode.
This can happen for one of the following reasons:
o Fail-safe reboot was explicitly initiated by the user.
o The device rebooted automatically too many times because of
the failure of internal consistency checks or the failure of
tests that verify proper operation of the device."
::= { jnxWxCommonEventEventsV2 1 }
jnxWxCommonEventPowerSupplyFailure NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"One or more sources of power to the system has failed.
A redundant power-supply has presumably taken over.
NOTE: This trap is for future use.
WX devices currently do not generate this trap."
::= { jnxWxCommonEventEventsV2 2 }
jnxWxCommonEventPowerSupplyOk NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"One or more previously failed sources of power is now
working normally. The transition to normal condition happened
without the system having to be restarted.
NOTE: This trap is for future use.
WX devices currently do not generate this trap."
::= { jnxWxCommonEventEventsV2 3 }
jnxWxCommonEventLicenseExpired NOTIFICATION-TYPE
OBJECTS { jnxWxCommonEventDescr }
STATUS current
DESCRIPTION
"The license for the system expired.
As a result, the system will switch over to
and stay in pass-through mode."
::= { jnxWxCommonEventEventsV2 4 }
jnxWxCommonEventThruputLimitExceeded NOTIFICATION-TYPE
OBJECTS { jnxWxCommonEventDescr }
STATUS current
DESCRIPTION
"The throughput of traffic through the device
has exceeded the limit for which it has
been licensed."
::= { jnxWxCommonEventEventsV2 5 }
jnxWxCommonEventLicenseWillExpire NOTIFICATION-TYPE
OBJECTS { jnxWxCommonEventDescr }
STATUS current
DESCRIPTION
"The license for the system is about to
expire shortly. When it eventually does
expire, the system will switch over to
and stay in pass-through mode."
::= { jnxWxCommonEventEventsV2 6 }
jnxWxCommonEventLoginFailure NOTIFICATION-TYPE
OBJECTS { jnxWxCommonEventDescr }
STATUS current
DESCRIPTION
"A user's login attempt via the console/ssh/web server
failed due to incorrect username or password."
::= { jnxWxCommonEventEventsV2 7 }
jnxWxCommonEventFaultTolerantPassThrough NOTIFICATION-TYPE
OBJECTS { jnxWxCommonEventDescr }
STATUS current
DESCRIPTION
"An anomalous health condition was detected.
It would have subsequently triggered hardware
pass through mode followed by a reboot."
::= { jnxWxCommonEventEventsV2 8 }
jnxWxCommonEventFanFailure NOTIFICATION-TYPE
OBJECTS { jnxWxCommonEventDescr }
STATUS current
DESCRIPTION
"A cooling fan inside the device has failed.
The 'jnxWxCommonEventDescr' object has the name of
the fan that failed.
This trap is currently unused"
::= { jnxWxCommonEventEventsV2 9 }
jnxWxCommonEventFanSpeedVariation NOTIFICATION-TYPE
OBJECTS { jnxWxCommonEventDescr }
STATUS current
DESCRIPTION
"The speed of a cooling fan inside the device is either
too low or too high. The 'jnxWxCommonEventDescr' object
has the name of the fan that has the problem.
This trap is currently unused."
::= { jnxWxCommonEventEventsV2 10 }
jnxWxCommonEventFanOk NOTIFICATION-TYPE
OBJECTS { jnxWxCommonEventDescr }
STATUS current
DESCRIPTION
"A cooling fan inside the device that had previously
failed or whose speed variation was high is now
working properly. The 'jnxWxCommonEventDescr' object
has the name of the fan that has recovered.
This trap is currently unused."
::= { jnxWxCommonEventEventsV2 11 }
jnxWxCommonEventInterfaceSpeedMismatch NOTIFICATION-TYPE
OBJECTS { jnxWxCommonEventDescr }
STATUS current
DESCRIPTION
"A mismatch is detected between the local and remote
interface settings. This can happen due to a mismatch
in the local and remote interface speed or mode. "
::= { jnxWxCommonEventEventsV2 12 }
jnxWxCommonEventInterfaceSpeedOk NOTIFICATION-TYPE
OBJECTS { jnxWxCommonEventDescr }
STATUS current
DESCRIPTION
"A mismatch previously detected between the local and remote
interface settings is now resolved. The local and remote interface
speed and mode are matched. "
::= { jnxWxCommonEventEventsV2 13 }
jnxWxCommonEventInterfaceDuplexMismatch NOTIFICATION-TYPE
OBJECTS { jnxWxCommonEventDescr }
STATUS current
DESCRIPTION
"A possible mismatch was detected between the duplex setting
of either the local or remote interface and that of the
device attached to that interface. The interface (local
or remote) is identified by the 'jnxWxCommonEventDescr' object.
Note that this notification is quite different from
jnxWxCommonEventInterfaceSpeedMismatch, which compares the
local and remote interfaces on the same WX device."
::= { jnxWxCommonEventEventsV2 14 }
jnxWxCommonEventIpsecSecurityAssociationAdded NOTIFICATION-TYPE
OBJECTS { jnxWxCommonEventDescr }
STATUS current
DESCRIPTION
"An IPSec security association has been negotiated and added
to security association database."
::= { jnxWxCommonEventEventsV2 15 }
jnxWxCommonEventIpsecSecurityAssociationExpired NOTIFICATION-TYPE
OBJECTS { jnxWxCommonEventDescr }
STATUS current
DESCRIPTION
"An IPSec security association has been deleted from the
security association database."
::= { jnxWxCommonEventEventsV2 16 }
jnxWxCommonEventIpsecSecurityAssociationDeleted NOTIFICATION-TYPE
OBJECTS { jnxWxCommonEventDescr }
STATUS current
DESCRIPTION
"An IPSec security association has been deleted from the
security association database."
::= { jnxWxCommonEventEventsV2 17 }
END