mibs/MIBS/junos/DRAFT-MSDP-MIB
2023-12-05 12:25:34 +01:00

1080 lines
36 KiB
Plaintext

--
-- This is draft-ietf-msdp-mib-07 with 'extra' text removed to keep
-- the mib compiler happy.
---
DRAFT-MSDP-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
experimental, Counter32, Gauge32, TimeTicks, Integer32
FROM SNMPv2-SMI
RowStatus, TruthValue, TimeStamp, DisplayString
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
FROM SNMPv2-CONF
InterfaceIndexOrZero
FROM IF-MIB
InetAddressType, InetAddress, InetPortNumber, InetAddressPrefixLength
FROM INET-ADDRESS-MIB;
msdpMIB MODULE-IDENTITY
LAST-UPDATED "200103010000Z"
ORGANIZATION "IETF MSDP Working Group"
CONTACT-INFO
"Bill Fenner
75 Willow Road
Menlo Park, CA 94025
Phone: +1 650 867 6073
E-mail: fenner@research.att.com
Dave Thaler
One Microsoft Way
Redmond, WA 98052
Phone: +1 425 703 8835
Email: dthaler@microsoft.com"
DESCRIPTION
"An experimental MIB module for MSDP Management."
::= { experimental 92 }
msdp OBJECT IDENTIFIER ::= { msdpMIB 1 }
msdpScalars OBJECT IDENTIFIER ::= { msdp 1 }
msdpEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The state of MSDP on this MSDP speaker - globally enabled or
disabled."
::= { msdpScalars 1 }
msdpCacheLifetime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The lifetime given to SA cache entries when created or
refreshed. This is the [SA-State-Period] in the MSDP spec.
A value of 0 means no SA caching is done by this MSDP
speaker."
::= { msdpScalars 2 }
msdpNumSACacheEntries OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of entries in the SA Cache table."
::= { msdpScalars 3 }
msdpSAHoldDownPeriod OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of seconds in the MSDP SA Hold-down period."
::= { msdpScalars 4 }
msdpSAStatePeriod OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of seconds in the MSDP SA State period."
::= { msdpScalars 5 }
msdpRPAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of the RP address used when sourcing MSDP SA
messages. May be unknown(0) on non-RP's or when the PIM RP
address is correct."
::= { msdpScalars 6 }
msdpRPAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The RP address used when sourcing MSDP SA messages. May be
a null string on non-RP's or when the PIM RP address is
correct."
::= { msdpScalars 7 }
---
--- The MSDP Requests table
---
msdpRequestsTable OBJECT-TYPE
SYNTAX SEQUENCE OF MsdpRequestsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing group ranges and MSDP peers
used when deciding where to send an SA Request message when
required. If SA Requests are not enabled, this table may be
empty.
In order to choose a peer to whom to send an SA Request for
a given group G, the subset of entries in this table whose
(msdpRequestsPeerType, msdpRequestsPeer) tuple represents a
peer whose msdpPeerState is established are examined. The
set is further reduced by examining only those entries for
which msdpPeerRequestsGroupAddressType equals the address
type of G, and the entries with the highest value of
msdpRequestsGroupPrefix are considered, where the group G
falls within the range described by the combination of
msdpRequestsGroup and msdpRequestsGroupPrefix. (This
sequence is commonly known as a 'longest-match' lookup.)
Finally, if multiple entries remain, the entry with the
lowest value of msdpRequestsPriority is chosen. The SA
Request message is sent to the peer described by this row."
::= { msdp 2 }
msdpRequestsEntry OBJECT-TYPE
SYNTAX MsdpRequestsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) representing a group range used
when deciding where to send an SA Request message."
INDEX { msdpRequestsGroupAddressType, msdpRequestsGroupAddress,
msdpRequestsGroupPrefix, msdpRequestsPriority }
::= { msdpRequestsTable 1 }
MsdpRequestsEntry ::= SEQUENCE {
msdpRequestsGroupAddressType InetAddressType,
msdpRequestsGroupAddress InetAddress,
msdpRequestsGroupPrefix InetAddressPrefixLength,
msdpRequestsPriority Integer32,
msdpRequestsPeerType InetAddressType,
msdpRequestsPeer InetAddress,
msdpRequestsStatus RowStatus
}
msdpRequestsGroupAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The address type of msdpRequestsGroupAddress. Only ipv4 and
ipv6 addresses are expected."
::= { msdpRequestsEntry 1 }
msdpRequestsGroupAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE(1..36))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The group address that, when combined with the prefix length
in this entry, represents the group range to which this row
applies."
::= { msdpRequestsEntry 2 }
msdpRequestsGroupPrefix OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The prefix length that, when combined with the group address
in this entry, represents the group range to which this row
applies."
::= { msdpRequestsEntry 3 }
msdpRequestsPriority OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The priority of this peer. The peer with the lowest
priority value with which we have an active peering session
(i.e. msdpPeerState = established) is the peer to whom SA
requests for groups matching the entry's group range will be
sent."
::= { msdpRequestsEntry 4 }
msdpRequestsPeerType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The address type of msdpRequestsPeer."
::= { msdpRequestsEntry 5 }
msdpRequestsPeer OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The peer to which MSDP SA Requests for groups matching this
entry's group range will be sent. This object combined with
msdpRequestsPeerType must match the INDEX of a row in the
msdpPeerTable, and to be considered, this peer's
msdpPeerState must be established."
::= { msdpRequestsEntry 6 }
msdpRequestsStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row, by which new rows may be added to
the table or old rows may be deleted."
::= { msdpRequestsEntry 7 }
---
--- The MSDP Peer table
---
msdpPeerTable OBJECT-TYPE
SYNTAX SEQUENCE OF MsdpPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the MSDP speaker's peers."
::= { msdp 3 }
msdpPeerEntry OBJECT-TYPE
SYNTAX MsdpPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) representing an MSDP peer."
INDEX { msdpPeerAddressType, msdpPeerRemoteAddress }
::= { msdpPeerTable 1 }
MsdpPeerEntry ::= SEQUENCE {
msdpPeerAddressType InetAddressType,
msdpPeerRemoteAddress InetAddress,
msdpPeerState INTEGER,
msdpPeerRPFFailures Counter32,
msdpPeerInSAs Counter32,
msdpPeerOutSAs Counter32,
msdpPeerInSARequests Counter32,
msdpPeerOutSARequests Counter32,
msdpPeerInSAResponses Counter32,
msdpPeerOutSAResponses Counter32,
msdpPeerInControlMessages Counter32,
msdpPeerOutControlMessages Counter32,
msdpPeerInDataPackets Counter32,
msdpPeerOutDataPackets Counter32,
msdpPeerFsmEstablishedTransitions Counter32,
msdpPeerFsmEstablishedTime TimeStamp,
msdpPeerInMessageTime TimeStamp,
msdpPeerLocalAddress InetAddress,
msdpPeerConnectRetryInterval Integer32,
msdpPeerHoldTimeConfigured Integer32,
msdpPeerKeepAliveConfigured Integer32,
msdpPeerDataTtl Integer32,
msdpPeerProcessRequestsFrom TruthValue,
msdpPeerStatus RowStatus,
msdpPeerRemotePort InetPortNumber,
msdpPeerLocalPort InetPortNumber,
msdpPeerEncapsulationType INTEGER,
msdpPeerConnectionAttempts Counter32,
msdpPeerInNotifications Counter32,
msdpPeerOutNotifications Counter32,
msdpPeerLastError OCTET STRING,
msdpPeerIfIndex InterfaceIndexOrZero,
msdpPeerDiscontinuityTime TimeStamp
}
msdpPeerAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The address type of msdpPeerRemoteAddress and
msdpPeerLocalAddress."
::= { msdpPeerEntry 1 }
msdpPeerRemoteAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE(1..36))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The address of the remote MSDP peer."
::= { msdpPeerEntry 2 }
msdpPeerState OBJECT-TYPE
SYNTAX INTEGER {
inactive(1),
listen(2),
connecting(3),
established(4),
disabled(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the MSDP TCP connection with this peer."
::= { msdpPeerEntry 3 }
msdpPeerRPFFailures OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SA messages received from this peer which
failed the Peer-RPF check.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
msdpPeerDiscontinuityTime."
::= { msdpPeerEntry 4 }
msdpPeerInSAs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MSDP SA messages received on this connection.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
msdpPeerDiscontinuityTime."
::= { msdpPeerEntry 5 }
msdpPeerOutSAs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MSDP SA messages transmitted on this
connection.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
msdpPeerDiscontinuityTime."
::= { msdpPeerEntry 6 }
msdpPeerInSARequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MSDP SA-Request messages received on this
connection.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
msdpPeerDiscontinuityTime."
::= { msdpPeerEntry 7 }
msdpPeerOutSARequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MSDP SA-Request messages transmitted on this
connection.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
msdpPeerDiscontinuityTime."
::= { msdpPeerEntry 8 }
msdpPeerInSAResponses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MSDP SA-Response messages received on this
connection.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
msdpPeerDiscontinuityTime."
::= { msdpPeerEntry 9 }
msdpPeerOutSAResponses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MSDP SA Response messages transmitted on this
TCP connection.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
msdpPeerDiscontinuityTime."
::= { msdpPeerEntry 10 }
msdpPeerInControlMessages OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of MSDP messages received on this TCP
connection.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
msdpPeerDiscontinuityTime."
::= { msdpPeerEntry 11 }
msdpPeerOutControlMessages OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of MSDP messages transmitted on this TCP
connection.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
msdpPeerDiscontinuityTime."
::= { msdpPeerEntry 12 }
msdpPeerInDataPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of encapsulated data packets received from
this peer.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
msdpPeerDiscontinuityTime."
::= { msdpPeerEntry 13 }
msdpPeerOutDataPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of encapsulated data packets sent to this
peer.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
msdpPeerDiscontinuityTime."
::= { msdpPeerEntry 14 }
msdpPeerFsmEstablishedTransitions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times the MSDP FSM transitioned into the
established state."
::= { msdpPeerEntry 15 }
msdpPeerFsmEstablishedTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This timestamp is set to the value of sysUpTime when a peer
transitions into or out of the Established state. It is set
to zero when the MSDP speaker is booted."
::= { msdpPeerEntry 16 }
msdpPeerInMessageTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sysUpTime value when the last MSDP message was received
from the peer. It is set to zero when the MSDP speaker is
booted."
::= { msdpPeerEntry 17 }
msdpPeerLocalAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The local IP address of this entry's MSDP connection."
::= { msdpPeerEntry 18 }
msdpPeerConnectRetryInterval OBJECT-TYPE
SYNTAX Integer32 (1..65535)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Time interval in seconds for the [ConnectRetry-period] for
this peer."
REFERENCE "draft-ietf-msdp-spec-10.txt section 8.7"
DEFVAL { 120 }
::= { msdpPeerEntry 19 }
msdpPeerHoldTimeConfigured OBJECT-TYPE
SYNTAX Integer32 (0|3..65535)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Time interval in seconds for the [HoldTime-Period]
configured for this MSDP speaker with this peer."
REFERENCE "draft-ietf-msdp-spec-10.txt section 8.5"
DEFVAL { 90 }
::= { msdpPeerEntry 20 }
msdpPeerKeepAliveConfigured OBJECT-TYPE
SYNTAX Integer32 (0|1..21845)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Time interval in seconds for the [KeepAlive-Period]
configured for this MSDP speaker with this peer. A
reasonable maximum value for this timer would be configured
to be one third of that of msdpPeerHoldTimeConfigured. If
the value of this object is zero (0), no periodic KEEPALIVE
messages are sent to the peer after the MSDP connection has
been established."
REFERENCE "draft-ietf-msdp-spec-10.txt section 8.6"
DEFVAL { 30 }
::= { msdpPeerEntry 21 }
msdpPeerDataTtl OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The minimum TTL a packet is required to have before it may
be forwarded using SA encapsulation to this peer."
::= { msdpPeerEntry 22 }
msdpPeerProcessRequestsFrom OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates whether or not to process MSDP SA
Request messages from this peer. If True(1), MSDP SA
Request messages from this peer are processed and replied to
(if appropriate) with SA Response messages. If False(2),
MSDP SA Request messages from this peer are silently
ignored. It defaults to False when msdpCacheLifetime is 0
and True when msdpCacheLifetime is non-0."
::= { msdpPeerEntry 23 }
msdpPeerStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The RowStatus object by which peers can be added and
deleted. A transition to 'active' will cause the MSDP Start
Event to be generated. A transition out of the 'active'
state will cause the MSDP Stop Event to be generated. Care
should be used in providing write access to this object
without adequate authentication."
::= { msdpPeerEntry 24 }
msdpPeerRemotePort OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The remote port for the TCP connection between the MSDP
peers."
::= { msdpPeerEntry 25 }
msdpPeerLocalPort OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The local port for the TCP connection between the MSDP
peers."
::= { msdpPeerEntry 26 }
msdpPeerEncapsulationType OBJECT-TYPE
SYNTAX INTEGER {
none(0),
tcp(1),
udp(2),
gre(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The encapsulation in use when encapsulating data in SA
messages to this peer."
DEFVAL { gre }
::= { msdpPeerEntry 27 }
msdpPeerConnectionAttempts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the state machine has transitioned from
inactive to connecting."
::= { msdpPeerEntry 28 }
msdpPeerInNotifications OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MSDP Notification messages received from this
peer."
::= { msdpPeerEntry 29 }
msdpPeerOutNotifications OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MSDP Notification messages transmitted to this
peer."
::= { msdpPeerEntry 30 }
msdpPeerLastError OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (2))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last error code and subcode received via Notification
from this peer. If no error has occurred, this field is
zero. Otherwise, the first byte of this two byte OCTET
STRING contains the O-bit and error code, and the second
byte contains the subcode."
REFERENCE "draft-ietf-msdp-spec-10.txt section 16.2.5 and 17"
DEFVAL { '0000'h }
::= { msdpPeerEntry 31 }
msdpPeerIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface index of the MSDP encapsulation interface for
this peer, or zero if the encapsulation is not represented
by an interface in the ifTable."
DEFVAL { 0 }
::= { msdpPeerEntry 32 }
msdpPeerDiscontinuityTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime on the most recent occasion at which
one or more of this entry's counters suffered a
discontinuity. See the DESCRIPTION of each object to see if
it is expected to have discontinuities. These
discontinuities may occur at peer connection establishment.
If no such discontinuities have occurred since the last
reinitialization of the local management subsystem, then
this object contains a zero value."
::= { msdpPeerEntry 33 }
---
--- The MSDP Source-Active Cache table
---
msdpSACacheTable OBJECT-TYPE
SYNTAX SEQUENCE OF MsdpSACacheEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the MSDP SA advertisements
currently in the MSDP speaker's cache."
::= { msdp 4 }
msdpSACacheEntry OBJECT-TYPE
SYNTAX MsdpSACacheEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) representing an MSDP SA
advertisement. The INDEX to this table includes
msdpSACacheOriginRP for diagnosing incorrect MSDP
advertisements; normally a Group and Source pair would be
unique."
INDEX { msdpSACacheAddrType, msdpSACacheGroupAddr,
msdpSACacheSourceAddr, msdpSACacheSourcePrefix,
msdpSACacheOriginRP }
::= { msdpSACacheTable 1 }
MsdpSACacheEntry ::= SEQUENCE {
msdpSACacheAddrType InetAddressType,
msdpSACacheGroupAddr InetAddress,
msdpSACacheSourceAddr InetAddress,
msdpSACacheSourcePrefix InetAddressPrefixLength,
msdpSACacheOriginRP InetAddress,
msdpSACachePeerLearnedFrom InetAddress,
msdpSACacheRPFPeer InetAddress,
msdpSACacheInSAs Counter32,
msdpSACacheInDataPackets Counter32,
msdpSACacheUpTime TimeTicks,
msdpSACacheExpiryTime TimeTicks,
msdpSACacheStatus RowStatus
}
msdpSACacheAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The address type of all of the InetAddress object in this
entry."
::= { msdpSACacheEntry 1 }
msdpSACacheGroupAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE(1..36))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The group address of the SA Cache entry."
::= { msdpSACacheEntry 2 }
msdpSACacheSourceAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE(1..36))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The source address of the SA Cache entry."
::= { msdpSACacheEntry 3 }
msdpSACacheSourcePrefix OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Sprefix len of this SA Cache entry."
::= { msdpSACacheEntry 4 }
msdpSACacheOriginRP OBJECT-TYPE
SYNTAX InetAddress (SIZE(1..36))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The RP of the SA Cache entry. This field is in the INDEX in
order to catch multiple RP's advertising the same source and
group."
::= { msdpSACacheEntry 5 }
msdpSACachePeerLearnedFrom OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The peer from which this SA Cache entry was last accepted.
This address must correspond to the msdpPeerRemoteAddress
value for a row in the MSDP Peer Table."
::= { msdpSACacheEntry 6 }
msdpSACacheRPFPeer OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The peer from which an SA message corresponding to this
cache entry would be accepted (i.e. the RPF peer for
msdpSACacheOriginRP). This may be different than
msdpSACachePeerLearnedFrom if this entry was created by an
MSDP SA-Response. This address must correspond to the
msdpPeerRemoteAddress value for a row in the MSDP Peer
Table, or may be 0.0.0.0 if no RPF peer exists."
::= { msdpSACacheEntry 7 }
msdpSACacheInSAs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MSDP SA messages received relevant to this
cache entry. This object must be initialized to zero when
creating a cache entry."
::= { msdpSACacheEntry 8 }
msdpSACacheInDataPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MSDP encapsulated data packets received
relevant to this cache entry. This object must be
initialized to zero when creating a cache entry."
::= { msdpSACacheEntry 9 }
msdpSACacheUpTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time since this entry was placed in the SA cache."
::= { msdpSACacheEntry 10 }
msdpSACacheExpiryTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time remaining before this entry will expire from the SA
cache."
::= { msdpSACacheEntry 11 }
msdpSACacheStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of this row in the table. The only allowable
actions are to retrieve the status, which will be `active',
or to set the status to `destroy' in order to remove this
entry from the cache."
::= { msdpSACacheEntry 12 }
--
-- MSDP Mesh Group Membership table
--
msdpMeshGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF MsdpMeshGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing MSDP Mesh Group
configuration."
::= { msdp 5 }
msdpMeshGroupEntry OBJECT-TYPE
SYNTAX MsdpMeshGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) repesenting a peer in an MSDP Mesh
Group."
INDEX { msdpMeshGroupName, msdpMeshGroupPeerAddressType,
msdpMeshGroupPeerAddress }
::= { msdpMeshGroupTable 1 }
MsdpMeshGroupEntry ::= SEQUENCE {
msdpMeshGroupName DisplayString,
msdpMeshGroupPeerAddressType InetAddressType,
msdpMeshGroupPeerAddress InetAddress,
msdpMeshGroupStatus RowStatus
}
msdpMeshGroupName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..64))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The name of the mesh group."
::= { msdpMeshGroupEntry 1 }
msdpMeshGroupPeerAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The type of msdpMeshGroupPeerAddress."
::= { msdpMeshGroupEntry 2 }
msdpMeshGroupPeerAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE(1..36))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A peer address that is a member of the mesh group with name
msdpMeshGroupName. The tuple (msdpMeshGroupPeerAddressType,
msdpMeshGroupPeerAddress) must match a row in the
msdpPeerTable."
::= { msdpMeshGroupEntry 3 }
msdpMeshGroupStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This entry's status, by which new entries may be added to
the table and old entries deleted."
::= { msdpMeshGroupEntry 4 }
-- Traps
msdpTraps OBJECT IDENTIFIER ::= { msdp 0 }
msdpEstablished NOTIFICATION-TYPE
OBJECTS { msdpPeerFsmEstablishedTransitions }
STATUS current
DESCRIPTION
"The MSDP Established event is generated when the MSDP FSM
enters the ESTABLISHED state."
::= { msdpTraps 1 }
msdpBackwardTransition NOTIFICATION-TYPE
OBJECTS { msdpPeerState }
STATUS current
DESCRIPTION
"The MSDPBackwardTransition Event is generated when the MSDP
FSM moves from a higher numbered state to a lower numbered
state."
::= { msdpTraps 2 }
-- conformance information
msdpMIBConformance OBJECT IDENTIFIER ::= { msdp 6 }
msdpMIBCompliances OBJECT IDENTIFIER ::= { msdpMIBConformance 1 }
msdpMIBGroups OBJECT IDENTIFIER ::= { msdpMIBConformance 2 }
-- compliance statements
msdpMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities which implement the
MSDP MIB."
MODULE -- this module
MANDATORY-GROUPS { msdpMIBGlobalsGroup, msdpMIBPeerGroup,
msdpMIBNotificationGroup }
GROUP msdpMIBEncapsulationGroup
DESCRIPTION
"This group is mandatory if MSDP encapsulation interfaces are
not given their own interface index numbers."
GROUP msdpMIBSACacheGroup
DESCRIPTION
"This group is mandatory if the MSDP speaker has the ability
to cache SA messages."
GROUP msdpMIBRequestsGroup
DESCRIPTION
"This group is mandatory if the MSDP speaker has the ability
to send SA-Request messages and parse SA-Response
messages."
GROUP msdpMIBRPGroup
DESCRIPTION
"This group is mandatory if the MSDP speaker sources (as
opposed to forwards) MSDP messages."
GROUP msdpMIBMeshGroupGroup
DESCRIPTION
"This group is mandatory if the MSDP speaker can participate
in MSDP Mesh Groups."
::= { msdpMIBCompliances 1 }
-- units of conformance
msdpMIBGlobalsGroup OBJECT-GROUP
OBJECTS { msdpEnabled }
STATUS current
DESCRIPTION
"A collection of objects providing information on global MSDP
state."
::= { msdpMIBGroups 1 }
msdpMIBPeerGroup OBJECT-GROUP
OBJECTS { msdpPeerRPFFailures,
msdpPeerState, msdpPeerInSAs, msdpPeerOutSAs,
msdpPeerInSARequests, msdpPeerOutSARequests,
msdpPeerInSAResponses, msdpPeerOutSAResponses,
msdpPeerInNotifications, msdpPeerOutNotifications,
msdpPeerInControlMessages, msdpPeerOutControlMessages,
msdpPeerFsmEstablishedTransitions,
msdpPeerFsmEstablishedTime,
msdpPeerLocalAddress,
msdpPeerRemotePort, msdpPeerLocalPort,
msdpPeerConnectRetryInterval,
msdpPeerHoldTimeConfigured,
msdpPeerKeepAliveConfigured,
msdpPeerInMessageTime,
msdpPeerProcessRequestsFrom,
msdpPeerConnectionAttempts,
msdpPeerLastError,
msdpPeerIfIndex,
msdpPeerStatus,
msdpPeerDiscontinuityTime
}
STATUS current
DESCRIPTION
"A collection of objects for managing MSDP peers."
::= { msdpMIBGroups 2 }
msdpMIBEncapsulationGroup OBJECT-GROUP
OBJECTS { msdpPeerInDataPackets, msdpPeerOutDataPackets,
msdpPeerDataTtl,
msdpPeerEncapsulationType
}
STATUS current
DESCRIPTION
"A collection of objects for managing encapsulations if the
MSDP encapsulation interfaces are not given interface
indices."
::= { msdpMIBGroups 3 }
msdpMIBSACacheGroup OBJECT-GROUP
OBJECTS { msdpCacheLifetime, msdpNumSACacheEntries,
msdpSAHoldDownPeriod, msdpSAStatePeriod,
msdpSACachePeerLearnedFrom,
msdpSACacheRPFPeer, msdpSACacheInSAs,
msdpSACacheInDataPackets,
msdpSACacheUpTime, msdpSACacheExpiryTime,
msdpSACacheStatus }
STATUS current
DESCRIPTION
"A collection of objects for managing MSDP SA cache entries."
::= { msdpMIBGroups 4 }
msdpMIBNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS { msdpEstablished,
msdpBackwardTransition }
STATUS current
DESCRIPTION
"A collection of notifications for signaling changes in MSDP
peer relationships."
::= { msdpMIBGroups 5 }
msdpMIBRequestsGroup OBJECT-GROUP
OBJECTS { msdpRequestsPeerType, msdpRequestsPeer, msdpRequestsStatus }
STATUS current
DESCRIPTION
"A collection of objects for managing MSDP Request
transmission."
::= { msdpMIBGroups 6 }
msdpMIBRPGroup OBJECT-GROUP
OBJECTS { msdpRPAddressType, msdpRPAddress }
STATUS current
DESCRIPTION
"A collection of objects for MSDP speakers that source MSDP
messages."
::= { msdpMIBGroups 7 }
msdpMIBMeshGroupGroup OBJECT-GROUP
OBJECTS { msdpMeshGroupStatus }
STATUS current
DESCRIPTION
"A collection of objects for MSDP speakers that can
participate in MSDP mesh groups."
::= { msdpMIBGroups 8 }
END