2109 lines
78 KiB
Plaintext
2109 lines
78 KiB
Plaintext
|
|
DS1-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE,
|
|
NOTIFICATION-TYPE, transmission FROM SNMPv2-SMI
|
|
DisplayString, TimeStamp, TruthValue FROM SNMPv2-TC
|
|
MODULE-COMPLIANCE, OBJECT-GROUP,
|
|
NOTIFICATION-GROUP FROM SNMPv2-CONF
|
|
InterfaceIndex, ifIndex FROM IF-MIB
|
|
PerfCurrentCount, PerfIntervalCount,
|
|
PerfTotalCount FROM PerfHist-TC-MIB;
|
|
|
|
|
|
ds1 MODULE-IDENTITY
|
|
LAST-UPDATED "9808011830Z"
|
|
ORGANIZATION "IETF Trunk MIB Working Group"
|
|
CONTACT-INFO
|
|
" David Fowler
|
|
|
|
Postal: Newbridge Networks Corporation
|
|
600 March Road
|
|
Kanata, Ontario, Canada K2K 2E6
|
|
|
|
Tel: +1 613 591 3600
|
|
Fax: +1 613 599 3667
|
|
|
|
E-mail: davef@newbridge.com"
|
|
DESCRIPTION
|
|
"The MIB module to describe DS1, E1, DS2, and
|
|
E2 interfaces objects."
|
|
|
|
::= { transmission 18 }
|
|
|
|
-- note that this subsumes cept (19) and g703at2mb (67)
|
|
-- there is no separate CEPT or G703AT2MB MIB
|
|
|
|
-- The DS1 Near End Group
|
|
|
|
-- The DS1 Near End Group consists of five tables:
|
|
-- DS1 Configuration
|
|
-- DS1 Current
|
|
-- DS1 Interval
|
|
-- DS1 Total
|
|
-- DS1 Channel Table
|
|
|
|
-- The DS1 Configuration Table
|
|
|
|
dsx1ConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dsx1ConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DS1 Configuration table."
|
|
::= { ds1 6 }
|
|
|
|
dsx1ConfigEntry OBJECT-TYPE
|
|
SYNTAX Dsx1ConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the DS1 Configuration table."
|
|
INDEX { dsx1LineIndex }
|
|
::= { dsx1ConfigTable 1 }
|
|
|
|
Dsx1ConfigEntry ::=
|
|
SEQUENCE {
|
|
dsx1LineIndex InterfaceIndex,
|
|
dsx1IfIndex InterfaceIndex,
|
|
dsx1TimeElapsed INTEGER,
|
|
dsx1ValidIntervals INTEGER,
|
|
dsx1LineType INTEGER,
|
|
dsx1LineCoding INTEGER,
|
|
dsx1SendCode INTEGER,
|
|
dsx1CircuitIdentifier DisplayString,
|
|
dsx1LoopbackConfig INTEGER,
|
|
dsx1LineStatus INTEGER,
|
|
dsx1SignalMode INTEGER,
|
|
dsx1TransmitClockSource INTEGER,
|
|
dsx1Fdl INTEGER,
|
|
dsx1InvalidIntervals INTEGER,
|
|
dsx1LineLength INTEGER,
|
|
dsx1LineStatusLastChange TimeStamp,
|
|
dsx1LineStatusChangeTrapEnable INTEGER,
|
|
dsx1LoopbackStatus INTEGER,
|
|
dsx1Ds1ChannelNumber INTEGER,
|
|
dsx1Channelization INTEGER
|
|
}
|
|
|
|
dsx1LineIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object should be made equal to ifIndex. The
|
|
next paragraph describes its previous usage.
|
|
Making the object equal to ifIndex allows proper
|
|
use of ifStackTable and ds0/ds0bundle mibs.
|
|
|
|
Previously, this object is the identifier of a DS1
|
|
Interface on a managed device. If there is an
|
|
ifEntry that is directly associated with this and
|
|
only this DS1 interface, it should have the same
|
|
value as ifIndex. Otherwise, number the
|
|
dsx1LineIndices with an unique identifier
|
|
following the rules of choosing a number that is
|
|
greater than ifNumber and numbering the inside
|
|
interfaces (e.g., equipment side) with even
|
|
numbers and outside interfaces (e.g, network side)
|
|
with odd numbers."
|
|
::= { dsx1ConfigEntry 1 }
|
|
|
|
dsx1IfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This value for this object is equal to the value
|
|
of ifIndex from the Interfaces table of MIB II
|
|
(RFC 1213)."
|
|
::= { dsx1ConfigEntry 2 }
|
|
|
|
dsx1TimeElapsed OBJECT-TYPE
|
|
SYNTAX INTEGER (0..899)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of seconds that have elapsed since
|
|
the beginning of the near end current error-
|
|
measurement period. If, for some reason, such
|
|
as an adjustment in the system's time-of-day
|
|
clock, the current interval exceeds the maximum
|
|
value, the agent will return the maximum value."
|
|
|
|
::= { dsx1ConfigEntry 3 }
|
|
|
|
dsx1ValidIntervals OBJECT-TYPE
|
|
SYNTAX INTEGER (0..96)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of previous near end intervals for
|
|
which data was collected. The value will be
|
|
96 unless the interface was brought online within
|
|
the last 24 hours, in which case the value will be
|
|
the number of complete 15 minute near end
|
|
intervals since the interface has been online. In
|
|
the case where the agent is a proxy, it is
|
|
possible that some intervals are unavailable. In
|
|
this case, this interval is the maximum interval
|
|
number for which data is available."
|
|
::= { dsx1ConfigEntry 4 }
|
|
|
|
dsx1LineType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
dsx1ESF(2),
|
|
dsx1D4(3),
|
|
dsx1E1(4),
|
|
dsx1E1CRC(5),
|
|
dsx1E1MF(6),
|
|
dsx1E1CRCMF(7),
|
|
dsx1Unframed(8),
|
|
dsx1E1Unframed(9),
|
|
dsx1DS2M12(10),
|
|
dsx2E2(11)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates the variety of DS1
|
|
Line implementing this circuit. The type of
|
|
circuit affects the number of bits per second
|
|
that the circuit can reasonably carry, as well
|
|
as the interpretation of the usage and error
|
|
statistics. The values, in sequence, describe:
|
|
|
|
TITLE: SPECIFICATION:
|
|
dsx1ESF Extended SuperFrame DS1 (T1.107)
|
|
dsx1D4 AT&T D4 format DS1 (T1.107)
|
|
dsx1E1 ITU-T Recommendation G.704
|
|
(Table 4a)
|
|
dsx1E1-CRC ITU-T Recommendation G.704
|
|
(Table 4b)
|
|
dsxE1-MF G.704 (Table 4a) with TS16
|
|
multiframing enabled
|
|
dsx1E1-CRC-MF G.704 (Table 4b) with TS16
|
|
multiframing enabled
|
|
dsx1Unframed DS1 with No Framing
|
|
dsx1E1Unframed E1 with No Framing (G.703)
|
|
dsx1DS2M12 DS2 frame format (T1.107)
|
|
dsx1E2 E2 frame format (G.704)
|
|
|
|
For clarification, the capacity for each E1 type
|
|
is as listed below:
|
|
dsx1E1Unframed - E1, no framing = 32 x 64k = 2048k
|
|
dsx1E1 or dsx1E1CRC - E1, with framing,
|
|
no signalling = 31 x 64k = 1984k
|
|
dsx1E1MF or dsx1E1CRCMF - E1, with framing,
|
|
signalling = 30 x 64k = 1920k
|
|
|
|
For further information See ITU-T Recomm G.704"
|
|
::= { dsx1ConfigEntry 5 }
|
|
|
|
dsx1LineCoding OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
dsx1JBZS (1),
|
|
dsx1B8ZS (2),
|
|
dsx1HDB3 (3),
|
|
dsx1ZBTSI (4),
|
|
dsx1AMI (5),
|
|
other(6),
|
|
dsx1B6ZS(7)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable describes the variety of Zero Code
|
|
Suppression used on this interface, which in turn
|
|
affects a number of its characteristics.
|
|
|
|
dsx1JBZS refers the Jammed Bit Zero Suppression,
|
|
in which the AT&T specification of at least one
|
|
pulse every 8 bit periods is literally implemented
|
|
by forcing a pulse in bit 8 of each channel.
|
|
Thus, only seven bits per channel, or 1.344 Mbps,
|
|
is available for data.
|
|
|
|
dsx1B8ZS refers to the use of a specified pattern
|
|
of normal bits and bipolar violations which are
|
|
used to replace a sequence of eight zero bits.
|
|
|
|
ANSI Clear Channels may use dsx1ZBTSI, or Zero
|
|
Byte Time Slot Interchange.
|
|
|
|
E1 links, with or without CRC, use dsx1HDB3 or
|
|
dsx1AMI.
|
|
|
|
dsx1AMI refers to a mode wherein no zero code
|
|
suppression is present and the line encoding does
|
|
not solve the problem directly. In this
|
|
application, the higher layer must provide data
|
|
which meets or exceeds the pulse density
|
|
requirements, such as inverting HDLC data.
|
|
|
|
dsx1B6ZS refers to the user of a specifed pattern
|
|
of normal bits and bipolar violations which are
|
|
used to replace a sequence of six zero bits. Used
|
|
for DS2."
|
|
|
|
::= { dsx1ConfigEntry 6 }
|
|
|
|
dsx1SendCode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
dsx1SendNoCode(1),
|
|
dsx1SendLineCode(2),
|
|
dsx1SendPayloadCode(3),
|
|
dsx1SendResetCode(4),
|
|
dsx1SendQRS(5),
|
|
dsx1Send511Pattern(6),
|
|
dsx1Send3in24Pattern(7),
|
|
dsx1SendOtherTestPattern(8)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates what type of code is
|
|
being sent across the DS1 interface by the device.
|
|
Setting this variable causes the interface to send
|
|
the code requested. The values mean:
|
|
dsx1SendNoCode
|
|
sending looped or normal data
|
|
|
|
dsx1SendLineCode
|
|
sending a request for a line loopback
|
|
|
|
dsx1SendPayloadCode
|
|
sending a request for a payload loopback
|
|
|
|
dsx1SendResetCode
|
|
sending a loopback termination request
|
|
|
|
dsx1SendQRS
|
|
sending a Quasi-Random Signal (QRS) test
|
|
pattern
|
|
|
|
dsx1Send511Pattern
|
|
sending a 511 bit fixed test pattern
|
|
|
|
dsx1Send3in24Pattern
|
|
sending a fixed test pattern of 3 bits set
|
|
in 24
|
|
|
|
dsx1SendOtherTestPattern
|
|
sending a test pattern other than those
|
|
described by this object"
|
|
::= { dsx1ConfigEntry 7 }
|
|
|
|
dsx1CircuitIdentifier OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..255))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable contains the transmission vendor's
|
|
circuit identifier, for the purpose of
|
|
facilitating troubleshooting."
|
|
::= { dsx1ConfigEntry 8 }
|
|
|
|
dsx1LoopbackConfig OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
dsx1NoLoop(1),
|
|
dsx1PayloadLoop(2),
|
|
dsx1LineLoop(3),
|
|
dsx1OtherLoop(4),
|
|
dsx1InwardLoop(5),
|
|
dsx1DualLoop(6)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable represents the desired loopback
|
|
configuration of the DS1 interface. Agents
|
|
supporting read/write access should return
|
|
inconsistentValue in response to a requested
|
|
loopback state that the interface does not
|
|
support. The values mean:
|
|
|
|
dsx1NoLoop
|
|
Not in the loopback state. A device that is not
|
|
capable of performing a loopback on the interface
|
|
shall always return this as its value.
|
|
|
|
dsx1PayloadLoop
|
|
The received signal at this interface is looped
|
|
through the device. Typically the received signal
|
|
is looped back for retransmission after it has
|
|
passed through the device's framing function.
|
|
|
|
dsx1LineLoop
|
|
The received signal at this interface does not go
|
|
through the device (minimum penetration) but is
|
|
looped back out.
|
|
|
|
dsx1OtherLoop
|
|
Loopbacks that are not defined here.
|
|
|
|
dsx1InwardLoop
|
|
The transmitted signal at this interface is
|
|
looped back and received by the same interface.
|
|
What is transmitted onto the line is product
|
|
dependent.
|
|
|
|
dsx1DualLoop
|
|
Both dsx1LineLoop and dsx1InwardLoop will be
|
|
active simultaneously."
|
|
::= { dsx1ConfigEntry 9 }
|
|
|
|
dsx1LineStatus OBJECT-TYPE
|
|
SYNTAX INTEGER (1..131071)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates the Line Status of the
|
|
interface. It contains loopback, failure,
|
|
received 'alarm' and transmitted 'alarms
|
|
information.
|
|
|
|
The dsx1LineStatus is a bit map represented as a
|
|
sum, therefore, it can represent multiple failures
|
|
(alarms) and a LoopbackState simultaneously.
|
|
|
|
dsx1NoAlarm must be set if and only if no other
|
|
flag is set.
|
|
|
|
If the dsx1loopbackState bit is set, the loopback
|
|
in effect can be determined from the
|
|
dsx1loopbackConfig object.
|
|
The various bit positions are:
|
|
1 dsx1NoAlarm No alarm present
|
|
2 dsx1RcvFarEndLOF Far end LOF (a.k.a., Yellow Alarm)
|
|
4 dsx1XmtFarEndLOF Near end sending LOF Indication
|
|
8 dsx1RcvAIS Far end sending AIS
|
|
16 dsx1XmtAIS Near end sending AIS
|
|
32 dsx1LossOfFrame Near end LOF (a.k.a., Red Alarm)
|
|
64 dsx1LossOfSignal Near end Loss Of Signal
|
|
128 dsx1LoopbackState Near end is looped
|
|
256 dsx1T16AIS E1 TS16 AIS
|
|
512 dsx1RcvFarEndLOMF Far End Sending TS16 LOMF
|
|
1024 dsx1XmtFarEndLOMF Near End Sending TS16 LOMF
|
|
2048 dsx1RcvTestCode Near End detects a test code
|
|
4096 dsx1OtherFailure any line status not defined here
|
|
8192 dsx1UnavailSigState Near End in Unavailable Signal
|
|
State
|
|
16384 dsx1NetEquipOOS Carrier Equipment Out of Service
|
|
32768 dsx1RcvPayloadAIS DS2 Payload AIS
|
|
65536 dsx1Ds2PerfThreshold DS2 Performance Threshold
|
|
Exceeded"
|
|
::= { dsx1ConfigEntry 10 }
|
|
|
|
dsx1SignalMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none (1),
|
|
robbedBit (2),
|
|
bitOriented (3),
|
|
messageOriented (4),
|
|
other (5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"'none' indicates that no bits are reserved for
|
|
signaling on this channel.
|
|
|
|
'robbedBit' indicates that DS1 Robbed Bit Sig-
|
|
naling is in use.
|
|
|
|
'bitOriented' indicates that E1 Channel Asso-
|
|
ciated Signaling is in use.
|
|
|
|
'messageOriented' indicates that Common Chan-
|
|
nel Signaling is in use either on channel 16 of
|
|
an E1 link or channel 24 of a DS1."
|
|
::= { dsx1ConfigEntry 11 }
|
|
|
|
dsx1TransmitClockSource OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
loopTiming(1),
|
|
localTiming(2),
|
|
throughTiming(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The source of Transmit Clock.
|
|
'loopTiming' indicates that the recovered re-
|
|
ceive clock is used as the transmit clock.
|
|
|
|
'localTiming' indicates that a local clock
|
|
source is used or when an external clock is
|
|
attached to the box containing the interface.
|
|
|
|
'throughTiming' indicates that recovered re-
|
|
ceive clock from another interface is used as
|
|
the transmit clock."
|
|
::= { dsx1ConfigEntry 12 }
|
|
|
|
dsx1Fdl OBJECT-TYPE
|
|
SYNTAX INTEGER (1..15)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This bitmap describes the use of the facili-
|
|
ties data link, and is the sum of the capabili-
|
|
ties. Set any bits that are appropriate:
|
|
|
|
other(1),
|
|
dsx1AnsiT1403(2),
|
|
dsx1Att54016(4),
|
|
dsx1FdlNone(8)
|
|
|
|
'other' indicates that a protocol other than
|
|
one following is used.
|
|
|
|
'dsx1AnsiT1403' refers to the FDL exchange
|
|
recommended by ANSI.
|
|
|
|
'dsx1Att54016' refers to ESF FDL exchanges.
|
|
|
|
'dsx1FdlNone' indicates that the device does
|
|
not use the FDL."
|
|
::= { dsx1ConfigEntry 13 }
|
|
|
|
dsx1InvalidIntervals OBJECT-TYPE
|
|
SYNTAX INTEGER (0..96)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of intervals in the range from 0 to
|
|
dsx1ValidIntervals for which no data is
|
|
available. This object will typically be zero
|
|
except in cases where the data for some intervals
|
|
are not available (e.g., in proxy situations)."
|
|
::= { dsx1ConfigEntry 14 }
|
|
|
|
dsx1LineLength OBJECT-TYPE
|
|
SYNTAX INTEGER (0..64000)
|
|
UNITS "meters"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The length of the ds1 line in meters. This
|
|
objects provides information for line build out
|
|
circuitry. This object is only useful if the
|
|
interface has configurable line build out
|
|
circuitry."
|
|
|
|
::= { dsx1ConfigEntry 15 }
|
|
|
|
dsx1LineStatusLastChange OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of MIB II's sysUpTime object at the
|
|
time this DS1 entered its current line status
|
|
state. If the current state was entered prior to
|
|
the last re-initialization of the proxy-agent,
|
|
then this object contains a zero value."
|
|
::= { dsx1ConfigEntry 16 }
|
|
|
|
dsx1LineStatusChangeTrapEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether dsx1LineStatusChange traps
|
|
should be generated for this interface."
|
|
DEFVAL { disabled }
|
|
::= { dsx1ConfigEntry 17 }
|
|
|
|
dsx1LoopbackStatus OBJECT-TYPE
|
|
SYNTAX INTEGER (1..127)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable represents the current state of the
|
|
loopback on the DS1 interface. It contains
|
|
information about loopbacks established by a
|
|
manager and remotely from the far end.
|
|
|
|
The dsx1LoopbackStatus is a bit map represented as
|
|
a sum, therefore is can represent multiple
|
|
loopbacks simultaneously.
|
|
|
|
The various bit positions are:
|
|
1 dsx1NoLoopback
|
|
2 dsx1NearEndPayloadLoopback
|
|
4 dsx1NearEndLineLoopback
|
|
8 dsx1NearEndOtherLoopback
|
|
16 dsx1NearEndInwardLoopback
|
|
32 dsx1FarEndPayloadLoopback
|
|
64 dsx1FarEndLineLoopback"
|
|
|
|
::= { dsx1ConfigEntry 18 }
|
|
|
|
dsx1Ds1ChannelNumber OBJECT-TYPE
|
|
SYNTAX INTEGER (0..28)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable represents the channel number of
|
|
the DS1/E1 on its parent Ds2/E2 or DS3/E3. A
|
|
value of 0 indicated this DS1/E1 does not have a
|
|
parent DS3/E3."
|
|
|
|
::= { dsx1ConfigEntry 19 }
|
|
|
|
dsx1Channelization OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(1),
|
|
enabledDs0(2),
|
|
enabledDs1(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether this ds1/e1 is channelized or
|
|
unchannelized. The value of enabledDs0 indicates
|
|
that this is a DS1 channelized into DS0s. The
|
|
value of enabledDs1 indicated that this is a DS2
|
|
channelized into DS1s. Setting this value will
|
|
cause the creation or deletion of entries in the
|
|
ifTable for the DS0s that are within the DS1."
|
|
::= { dsx1ConfigEntry 20 }
|
|
|
|
-- The DS1 Current Table
|
|
dsx1CurrentTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dsx1CurrentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DS1 current table contains various statistics
|
|
being collected for the current 15 minute
|
|
interval."
|
|
::= { ds1 7 }
|
|
|
|
dsx1CurrentEntry OBJECT-TYPE
|
|
SYNTAX Dsx1CurrentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the DS1 Current table."
|
|
INDEX { dsx1CurrentIndex }
|
|
::= { dsx1CurrentTable 1 }
|
|
|
|
Dsx1CurrentEntry ::=
|
|
SEQUENCE {
|
|
dsx1CurrentIndex InterfaceIndex,
|
|
dsx1CurrentESs PerfCurrentCount,
|
|
dsx1CurrentSESs PerfCurrentCount,
|
|
dsx1CurrentSEFSs PerfCurrentCount,
|
|
dsx1CurrentUASs PerfCurrentCount,
|
|
dsx1CurrentCSSs PerfCurrentCount,
|
|
dsx1CurrentPCVs PerfCurrentCount,
|
|
dsx1CurrentLESs PerfCurrentCount,
|
|
dsx1CurrentBESs PerfCurrentCount,
|
|
dsx1CurrentDMs PerfCurrentCount,
|
|
dsx1CurrentLCVs PerfCurrentCount
|
|
}
|
|
|
|
dsx1CurrentIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index value which uniquely identifies the
|
|
DS1 interface to which this entry is applicable.
|
|
The interface identified by a particular value of
|
|
this index is the same interface as identified by
|
|
the same value as a dsx1LineIndex object
|
|
instance."
|
|
::= { dsx1CurrentEntry 1 }
|
|
|
|
dsx1CurrentESs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Errored Seconds."
|
|
::= { dsx1CurrentEntry 2 }
|
|
|
|
dsx1CurrentSESs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Severely Errored Seconds."
|
|
::= { dsx1CurrentEntry 3 }
|
|
|
|
dsx1CurrentSEFSs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Severely Errored Framing Seconds."
|
|
::= { dsx1CurrentEntry 4 }
|
|
|
|
dsx1CurrentUASs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Unavailable Seconds."
|
|
::= { dsx1CurrentEntry 5 }
|
|
|
|
dsx1CurrentCSSs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Controlled Slip Seconds."
|
|
::= { dsx1CurrentEntry 6 }
|
|
|
|
dsx1CurrentPCVs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Path Coding Violations."
|
|
::= { dsx1CurrentEntry 7 }
|
|
|
|
dsx1CurrentLESs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Line Errored Seconds."
|
|
::= { dsx1CurrentEntry 8 }
|
|
|
|
dsx1CurrentBESs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Bursty Errored Seconds."
|
|
::= { dsx1CurrentEntry 9 }
|
|
|
|
dsx1CurrentDMs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Degraded Minutes."
|
|
::= { dsx1CurrentEntry 10 }
|
|
|
|
dsx1CurrentLCVs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Line Code Violations (LCVs)."
|
|
::= { dsx1CurrentEntry 11 }
|
|
|
|
|
|
-- The DS1 Interval Table
|
|
dsx1IntervalTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dsx1IntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DS1 Interval Table contains various
|
|
statistics collected by each DS1 Interface over
|
|
the previous 24 hours of operation. The past 24
|
|
hours are broken into 96 completed 15 minute
|
|
intervals. Each row in this table represents one
|
|
such interval (identified by dsx1IntervalNumber)
|
|
for one specific instance (identified by
|
|
dsx1IntervalIndex)."
|
|
::= { ds1 8 }
|
|
|
|
dsx1IntervalEntry OBJECT-TYPE
|
|
SYNTAX Dsx1IntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the DS1 Interval table."
|
|
INDEX { dsx1IntervalIndex, dsx1IntervalNumber }
|
|
::= { dsx1IntervalTable 1 }
|
|
|
|
Dsx1IntervalEntry ::=
|
|
SEQUENCE {
|
|
dsx1IntervalIndex InterfaceIndex,
|
|
dsx1IntervalNumber INTEGER,
|
|
dsx1IntervalESs PerfIntervalCount,
|
|
dsx1IntervalSESs PerfIntervalCount,
|
|
dsx1IntervalSEFSs PerfIntervalCount,
|
|
dsx1IntervalUASs PerfIntervalCount,
|
|
dsx1IntervalCSSs PerfIntervalCount,
|
|
dsx1IntervalPCVs PerfIntervalCount,
|
|
dsx1IntervalLESs PerfIntervalCount,
|
|
dsx1IntervalBESs PerfIntervalCount,
|
|
dsx1IntervalDMs PerfIntervalCount,
|
|
dsx1IntervalLCVs PerfIntervalCount,
|
|
dsx1IntervalValidData TruthValue
|
|
}
|
|
|
|
dsx1IntervalIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index value which uniquely identifies the DS1
|
|
interface to which this entry is applicable. The
|
|
interface identified by a particular value of this
|
|
index is the same interface as identified by the
|
|
same value as a dsx1LineIndex object instance."
|
|
::= { dsx1IntervalEntry 1 }
|
|
|
|
dsx1IntervalNumber OBJECT-TYPE
|
|
SYNTAX INTEGER (1..96)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A number between 1 and 96, where 1 is the most
|
|
recently completed 15 minute interval and 96 is
|
|
the 15 minutes interval completed 23 hours and 45
|
|
minutes prior to interval 1."
|
|
::= { dsx1IntervalEntry 2 }
|
|
|
|
dsx1IntervalESs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Errored Seconds."
|
|
::= { dsx1IntervalEntry 3 }
|
|
|
|
dsx1IntervalSESs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Severely Errored Seconds."
|
|
::= { dsx1IntervalEntry 4 }
|
|
|
|
dsx1IntervalSEFSs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Severely Errored Framing Seconds."
|
|
::= { dsx1IntervalEntry 5 }
|
|
|
|
dsx1IntervalUASs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Unavailable Seconds. This object
|
|
may decrease if the occurance of unavailable
|
|
seconds occurs across an inteval boundary."
|
|
::= { dsx1IntervalEntry 6 }
|
|
|
|
dsx1IntervalCSSs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Controlled Slip Seconds."
|
|
::= { dsx1IntervalEntry 7 }
|
|
|
|
dsx1IntervalPCVs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Path Coding Violations."
|
|
::= { dsx1IntervalEntry 8 }
|
|
|
|
dsx1IntervalLESs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Line Errored Seconds."
|
|
::= { dsx1IntervalEntry 9 }
|
|
|
|
dsx1IntervalBESs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Bursty Errored Seconds."
|
|
::= { dsx1IntervalEntry 10 }
|
|
|
|
dsx1IntervalDMs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Degraded Minutes."
|
|
::= { dsx1IntervalEntry 11 }
|
|
|
|
dsx1IntervalLCVs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Line Code Violations."
|
|
::= { dsx1IntervalEntry 12 }
|
|
|
|
dsx1IntervalValidData OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates if the data for this
|
|
interval is valid."
|
|
::= { dsx1IntervalEntry 13 }
|
|
|
|
-- The DS1 Total Table
|
|
dsx1TotalTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dsx1TotalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DS1 Total Table contains the cumulative sum
|
|
of the various statistics for the 24 hour period
|
|
preceding the current interval."
|
|
::= { ds1 9 }
|
|
|
|
dsx1TotalEntry OBJECT-TYPE
|
|
SYNTAX Dsx1TotalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the DS1 Total table."
|
|
INDEX { dsx1TotalIndex }
|
|
::= { dsx1TotalTable 1 }
|
|
|
|
Dsx1TotalEntry ::=
|
|
SEQUENCE {
|
|
dsx1TotalIndex InterfaceIndex,
|
|
dsx1TotalESs PerfTotalCount,
|
|
dsx1TotalSESs PerfTotalCount,
|
|
dsx1TotalSEFSs PerfTotalCount,
|
|
dsx1TotalUASs PerfTotalCount,
|
|
dsx1TotalCSSs PerfTotalCount,
|
|
dsx1TotalPCVs PerfTotalCount,
|
|
dsx1TotalLESs PerfTotalCount,
|
|
dsx1TotalBESs PerfTotalCount,
|
|
dsx1TotalDMs PerfTotalCount,
|
|
dsx1TotalLCVs PerfTotalCount
|
|
}
|
|
|
|
dsx1TotalIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index value which uniquely identifies the DS1
|
|
interface to which this entry is applicable. The
|
|
interface identified by a particular value of this
|
|
index is the same interface as identified by the
|
|
same value as a dsx1LineIndex object instance."
|
|
|
|
::= { dsx1TotalEntry 1 }
|
|
|
|
dsx1TotalESs OBJECT-TYPE
|
|
SYNTAX PerfTotalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum of Errored Seconds encountered by a DS1
|
|
interface in the previous 24 hour interval.
|
|
Invalid 15 minute intervals count as 0."
|
|
::= { dsx1TotalEntry 2 }
|
|
|
|
dsx1TotalSESs OBJECT-TYPE
|
|
SYNTAX PerfTotalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Severely Errored Seconds
|
|
encountered by a DS1 interface in the previous 24
|
|
hour interval. Invalid 15 minute intervals count
|
|
as 0."
|
|
::= { dsx1TotalEntry 3 }
|
|
|
|
dsx1TotalSEFSs OBJECT-TYPE
|
|
SYNTAX PerfTotalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Severely Errored Framing Seconds
|
|
encountered by a DS1 interface in the previous 24
|
|
hour interval. Invalid 15 minute intervals count
|
|
as 0."
|
|
::= { dsx1TotalEntry 4 }
|
|
|
|
dsx1TotalUASs OBJECT-TYPE
|
|
SYNTAX PerfTotalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Unavailable Seconds encountered by
|
|
a DS1 interface in the previous 24 hour interval.
|
|
Invalid 15 minute intervals count as 0."
|
|
::= { dsx1TotalEntry 5 }
|
|
|
|
dsx1TotalCSSs OBJECT-TYPE
|
|
SYNTAX PerfTotalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Controlled Slip Seconds encountered
|
|
by a DS1 interface in the previous 24 hour
|
|
interval. Invalid 15 minute intervals count as
|
|
0."
|
|
::= { dsx1TotalEntry 6 }
|
|
|
|
dsx1TotalPCVs OBJECT-TYPE
|
|
SYNTAX PerfTotalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Path Coding Violations encountered
|
|
by a DS1 interface in the previous 24 hour
|
|
interval. Invalid 15 minute intervals count as
|
|
0."
|
|
::= { dsx1TotalEntry 7 }
|
|
|
|
dsx1TotalLESs OBJECT-TYPE
|
|
SYNTAX PerfTotalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Line Errored Seconds encountered by
|
|
a DS1 interface in the previous 24 hour interval.
|
|
Invalid 15 minute intervals count as 0."
|
|
::= { dsx1TotalEntry 8 }
|
|
|
|
dsx1TotalBESs OBJECT-TYPE
|
|
SYNTAX PerfTotalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Bursty Errored Seconds (BESs)
|
|
encountered by a DS1 interface in the previous 24
|
|
hour interval. Invalid 15 minute intervals count
|
|
as 0."
|
|
::= { dsx1TotalEntry 9 }
|
|
|
|
dsx1TotalDMs OBJECT-TYPE
|
|
SYNTAX PerfTotalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Degraded Minutes (DMs) encountered
|
|
by a DS1 interface in the previous 24 hour
|
|
interval. Invalid 15 minute intervals count as
|
|
0."
|
|
::= { dsx1TotalEntry 10 }
|
|
|
|
dsx1TotalLCVs OBJECT-TYPE
|
|
SYNTAX PerfTotalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Line Code Violations (LCVs)
|
|
encountered by a DS1 interface in the current 15
|
|
minute interval. Invalid 15 minute intervals
|
|
count as 0."
|
|
::= { dsx1TotalEntry 11 }
|
|
|
|
-- The DS1 Channel Table
|
|
dsx1ChanMappingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dsx1ChanMappingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DS1 Channel Mapping table. This table maps a
|
|
DS1 channel number on a particular DS3 into an
|
|
ifIndex. In the presence of DS2s, this table can
|
|
be used to map a DS2 channel number on a DS3 into
|
|
an ifIndex, or used to map a DS1 channel number on
|
|
a DS2 onto an ifIndex."
|
|
::= { ds1 16 }
|
|
|
|
dsx1ChanMappingEntry OBJECT-TYPE
|
|
SYNTAX Dsx1ChanMappingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the DS1 Channel Mapping table. There
|
|
is an entry in this table corresponding to each
|
|
ds1 ifEntry within any interface that is
|
|
channelized to the individual ds1 ifEntry level.
|
|
|
|
This table is intended to facilitate mapping from
|
|
channelized interface / channel number to DS1
|
|
ifEntry. (e.g. mapping (DS3 ifIndex, DS1 Channel
|
|
Number) -> ifIndex)
|
|
|
|
While this table provides information that can
|
|
also be found in the ifStackTable and
|
|
dsx1ConfigTable, it provides this same information
|
|
with a single table lookup, rather than by walking
|
|
the ifStackTable to find the various constituent
|
|
ds1 ifTable entries, and testing various
|
|
dsx1ConfigTable entries to check for the entry
|
|
with the applicable DS1 channel number."
|
|
INDEX { ifIndex, dsx1Ds1ChannelNumber }
|
|
::= { dsx1ChanMappingTable 1 }
|
|
|
|
Dsx1ChanMappingEntry ::=
|
|
SEQUENCE {
|
|
dsx1ChanMappedIfIndex InterfaceIndex
|
|
}
|
|
|
|
|
|
dsx1ChanMappedIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the ifIndex value assigned
|
|
by the agent for the individual ds1 ifEntry that
|
|
corresponds to the given DS1 channel number
|
|
(specified by the INDEX element
|
|
dsx1Ds1ChannelNumber) of the given channelized
|
|
interface (specified by INDEX element ifIndex)."
|
|
::= { dsx1ChanMappingEntry 1 }
|
|
|
|
-- The DS1 Far End Current Table
|
|
|
|
dsx1FarEndCurrentTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dsx1FarEndCurrentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DS1 Far End Current table contains various
|
|
statistics being collected for the current 15
|
|
minute interval. The statistics are collected
|
|
from the far end messages on the Facilities Data
|
|
Link. The definitions are the same as described
|
|
for the near-end information."
|
|
::= { ds1 10 }
|
|
|
|
dsx1FarEndCurrentEntry OBJECT-TYPE
|
|
SYNTAX Dsx1FarEndCurrentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the DS1 Far End Current table."
|
|
INDEX { dsx1FarEndCurrentIndex }
|
|
::= { dsx1FarEndCurrentTable 1 }
|
|
|
|
Dsx1FarEndCurrentEntry ::=
|
|
SEQUENCE {
|
|
dsx1FarEndCurrentIndex InterfaceIndex,
|
|
dsx1FarEndTimeElapsed INTEGER,
|
|
dsx1FarEndValidIntervals INTEGER,
|
|
dsx1FarEndCurrentESs PerfCurrentCount,
|
|
dsx1FarEndCurrentSESs PerfCurrentCount,
|
|
dsx1FarEndCurrentSEFSs PerfCurrentCount,
|
|
dsx1FarEndCurrentUASs PerfCurrentCount,
|
|
dsx1FarEndCurrentCSSs PerfCurrentCount,
|
|
dsx1FarEndCurrentLESs PerfCurrentCount,
|
|
dsx1FarEndCurrentPCVs PerfCurrentCount,
|
|
dsx1FarEndCurrentBESs PerfCurrentCount,
|
|
dsx1FarEndCurrentDMs PerfCurrentCount,
|
|
dsx1FarEndInvalidIntervals INTEGER
|
|
}
|
|
|
|
dsx1FarEndCurrentIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index value which uniquely identifies the DS1
|
|
interface to which this entry is applicable. The
|
|
interface identified by a particular value of this
|
|
index is identical to the interface identified by
|
|
the same value of dsx1LineIndex."
|
|
::= { dsx1FarEndCurrentEntry 1 }
|
|
|
|
dsx1FarEndTimeElapsed OBJECT-TYPE
|
|
SYNTAX INTEGER (0..899)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of seconds that have elapsed since the
|
|
beginning of the far end current error-measurement
|
|
period. If, for some reason, such as an
|
|
adjustment in the system's time-of-day clock, the
|
|
current interval exceeds the maximum value, the
|
|
agent will return the maximum value."
|
|
::= { dsx1FarEndCurrentEntry 2 }
|
|
|
|
dsx1FarEndValidIntervals OBJECT-TYPE
|
|
SYNTAX INTEGER (0..96)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of previous far end intervals for
|
|
which data was collected. The value will be
|
|
96 unless the interface was brought online within
|
|
the last 24 hours, in which case the value will be
|
|
the number of complete 15 minute far end intervals
|
|
since the interface has been online."
|
|
::= { dsx1FarEndCurrentEntry 3 }
|
|
|
|
dsx1FarEndCurrentESs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Far End Errored Seconds."
|
|
::= { dsx1FarEndCurrentEntry 4 }
|
|
|
|
dsx1FarEndCurrentSESs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Far End Severely Errored Seconds."
|
|
|
|
::= { dsx1FarEndCurrentEntry 5 }
|
|
|
|
dsx1FarEndCurrentSEFSs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Far End Severely Errored Framing
|
|
Seconds."
|
|
::= { dsx1FarEndCurrentEntry 6 }
|
|
|
|
dsx1FarEndCurrentUASs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Unavailable Seconds."
|
|
::= { dsx1FarEndCurrentEntry 7 }
|
|
|
|
dsx1FarEndCurrentCSSs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Far End Controlled Slip Seconds."
|
|
::= { dsx1FarEndCurrentEntry 8 }
|
|
|
|
dsx1FarEndCurrentLESs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Far End Line Errored Seconds."
|
|
::= { dsx1FarEndCurrentEntry 9 }
|
|
|
|
dsx1FarEndCurrentPCVs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Far End Path Coding Violations."
|
|
::= { dsx1FarEndCurrentEntry 10 }
|
|
|
|
dsx1FarEndCurrentBESs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Far End Bursty Errored Seconds."
|
|
::= { dsx1FarEndCurrentEntry 11 }
|
|
|
|
dsx1FarEndCurrentDMs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Far End Degraded Minutes."
|
|
::= { dsx1FarEndCurrentEntry 12 }
|
|
|
|
dsx1FarEndInvalidIntervals OBJECT-TYPE
|
|
SYNTAX INTEGER (0..96)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of intervals in the range from 0 to
|
|
dsx1FarEndValidIntervals for which no data is
|
|
available. This object will typically be zero
|
|
except in cases where the data for some intervals
|
|
are not available (e.g., in proxy situations)."
|
|
::= { dsx1FarEndCurrentEntry 13 }
|
|
|
|
-- The DS1 Far End Interval Table
|
|
dsx1FarEndIntervalTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dsx1FarEndIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DS1 Far End Interval Table contains various
|
|
statistics collected by each DS1 interface over
|
|
the previous 24 hours of operation. The past 24
|
|
hours are broken into 96 completed 15 minute
|
|
intervals. Each row in this table represents one
|
|
such interval (identified by
|
|
dsx1FarEndIntervalNumber) for one specific
|
|
instance (identified by dsx1FarEndIntervalIndex)."
|
|
::= { ds1 11 }
|
|
|
|
dsx1FarEndIntervalEntry OBJECT-TYPE
|
|
SYNTAX Dsx1FarEndIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the DS1 Far End Interval table."
|
|
|
|
INDEX { dsx1FarEndIntervalIndex,
|
|
dsx1FarEndIntervalNumber }
|
|
::= { dsx1FarEndIntervalTable 1 }
|
|
|
|
Dsx1FarEndIntervalEntry ::=
|
|
SEQUENCE {
|
|
dsx1FarEndIntervalIndex InterfaceIndex,
|
|
dsx1FarEndIntervalNumber INTEGER,
|
|
dsx1FarEndIntervalESs PerfIntervalCount,
|
|
dsx1FarEndIntervalSESs PerfIntervalCount,
|
|
dsx1FarEndIntervalSEFSs PerfIntervalCount,
|
|
dsx1FarEndIntervalUASs PerfIntervalCount,
|
|
dsx1FarEndIntervalCSSs PerfIntervalCount,
|
|
dsx1FarEndIntervalLESs PerfIntervalCount,
|
|
dsx1FarEndIntervalPCVs PerfIntervalCount,
|
|
dsx1FarEndIntervalBESs PerfIntervalCount,
|
|
dsx1FarEndIntervalDMs PerfIntervalCount,
|
|
dsx1FarEndIntervalValidData TruthValue
|
|
}
|
|
|
|
dsx1FarEndIntervalIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index value which uniquely identifies the DS1
|
|
interface to which this entry is applicable. The
|
|
interface identified by a particular value of this
|
|
index is identical to the interface identified by
|
|
the same value of dsx1LineIndex."
|
|
::= { dsx1FarEndIntervalEntry 1 }
|
|
|
|
dsx1FarEndIntervalNumber OBJECT-TYPE
|
|
SYNTAX INTEGER (1..96)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A number between 1 and 96, where 1 is the most
|
|
recently completed 15 minute interval and 96 is
|
|
the 15 minutes interval completed 23 hours and 45
|
|
minutes prior to interval 1."
|
|
::= { dsx1FarEndIntervalEntry 2 }
|
|
|
|
dsx1FarEndIntervalESs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Far End Errored Seconds."
|
|
::= { dsx1FarEndIntervalEntry 3 }
|
|
|
|
dsx1FarEndIntervalSESs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Far End Severely Errored Seconds."
|
|
::= { dsx1FarEndIntervalEntry 4 }
|
|
|
|
dsx1FarEndIntervalSEFSs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Far End Severely Errored Framing
|
|
Seconds."
|
|
::= { dsx1FarEndIntervalEntry 5 }
|
|
|
|
dsx1FarEndIntervalUASs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Unavailable Seconds."
|
|
::= { dsx1FarEndIntervalEntry 6 }
|
|
|
|
dsx1FarEndIntervalCSSs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Far End Controlled Slip Seconds."
|
|
::= { dsx1FarEndIntervalEntry 7 }
|
|
|
|
dsx1FarEndIntervalLESs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Far End Line Errored Seconds."
|
|
|
|
::= { dsx1FarEndIntervalEntry 8 }
|
|
|
|
dsx1FarEndIntervalPCVs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Far End Path Coding Violations."
|
|
::= { dsx1FarEndIntervalEntry 9 }
|
|
|
|
dsx1FarEndIntervalBESs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Far End Bursty Errored Seconds."
|
|
::= { dsx1FarEndIntervalEntry 10 }
|
|
|
|
dsx1FarEndIntervalDMs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Far End Degraded Minutes."
|
|
::= { dsx1FarEndIntervalEntry 11 }
|
|
|
|
dsx1FarEndIntervalValidData OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates if the data for this
|
|
interval is valid."
|
|
::= { dsx1FarEndIntervalEntry 12 }
|
|
|
|
-- The DS1 Far End Total Table
|
|
|
|
dsx1FarEndTotalTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dsx1FarEndTotalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DS1 Far End Total Table contains the
|
|
cumulative sum of the various statistics for the
|
|
24 hour period preceding the current interval."
|
|
::= { ds1 12 }
|
|
|
|
dsx1FarEndTotalEntry OBJECT-TYPE
|
|
SYNTAX Dsx1FarEndTotalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the DS1 Far End Total table."
|
|
INDEX { dsx1FarEndTotalIndex }
|
|
::= { dsx1FarEndTotalTable 1 }
|
|
|
|
Dsx1FarEndTotalEntry ::=
|
|
SEQUENCE {
|
|
dsx1FarEndTotalIndex InterfaceIndex,
|
|
dsx1FarEndTotalESs PerfTotalCount,
|
|
dsx1FarEndTotalSESs PerfTotalCount,
|
|
dsx1FarEndTotalSEFSs PerfTotalCount,
|
|
dsx1FarEndTotalUASs PerfTotalCount,
|
|
dsx1FarEndTotalCSSs PerfTotalCount,
|
|
dsx1FarEndTotalLESs PerfTotalCount,
|
|
dsx1FarEndTotalPCVs PerfTotalCount,
|
|
dsx1FarEndTotalBESs PerfTotalCount,
|
|
dsx1FarEndTotalDMs PerfTotalCount
|
|
}
|
|
|
|
dsx1FarEndTotalIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index value which uniquely identifies the DS1
|
|
interface to which this entry is applicable. The
|
|
interface identified by a particular value of this
|
|
index is identical to the interface identified by
|
|
the same value of dsx1LineIndex."
|
|
|
|
::= { dsx1FarEndTotalEntry 1 }
|
|
|
|
dsx1FarEndTotalESs OBJECT-TYPE
|
|
SYNTAX PerfTotalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Far End Errored Seconds encountered
|
|
by a DS1 interface in the previous 24 hour
|
|
interval. Invalid 15 minute intervals count as
|
|
0."
|
|
::= { dsx1FarEndTotalEntry 2 }
|
|
|
|
dsx1FarEndTotalSESs OBJECT-TYPE
|
|
SYNTAX PerfTotalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Far End Severely Errored Seconds
|
|
encountered by a DS1 interface in the previous 24
|
|
hour interval. Invalid 15 minute intervals count
|
|
as 0."
|
|
::= { dsx1FarEndTotalEntry 3 }
|
|
|
|
dsx1FarEndTotalSEFSs OBJECT-TYPE
|
|
SYNTAX PerfTotalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Far End Severely Errored Framing
|
|
Seconds encountered by a DS1 interface in the
|
|
previous 24 hour interval. Invalid 15 minute
|
|
intervals count as 0."
|
|
::= { dsx1FarEndTotalEntry 4 }
|
|
|
|
dsx1FarEndTotalUASs OBJECT-TYPE
|
|
SYNTAX PerfTotalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Unavailable Seconds encountered by
|
|
a DS1 interface in the previous 24 hour interval.
|
|
Invalid 15 minute intervals count as 0."
|
|
::= { dsx1FarEndTotalEntry 5 }
|
|
|
|
dsx1FarEndTotalCSSs OBJECT-TYPE
|
|
SYNTAX PerfTotalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Far End Controlled Slip Seconds
|
|
encountered by a DS1 interface in the previous 24
|
|
hour interval. Invalid 15 minute intervals count
|
|
as 0."
|
|
::= { dsx1FarEndTotalEntry 6 }
|
|
|
|
dsx1FarEndTotalLESs OBJECT-TYPE
|
|
SYNTAX PerfTotalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Far End Line Errored Seconds
|
|
encountered by a DS1 interface in the previous 24
|
|
hour interval. Invalid 15 minute intervals count
|
|
as 0."
|
|
::= { dsx1FarEndTotalEntry 7 }
|
|
|
|
dsx1FarEndTotalPCVs OBJECT-TYPE
|
|
SYNTAX PerfTotalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Far End Path Coding Violations
|
|
reported via the far end block error count
|
|
encountered by a DS1 interface in the previous 24
|
|
hour interval. Invalid 15 minute intervals count
|
|
as 0."
|
|
::= { dsx1FarEndTotalEntry 8 }
|
|
|
|
dsx1FarEndTotalBESs OBJECT-TYPE
|
|
SYNTAX PerfTotalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Bursty Errored Seconds (BESs)
|
|
encountered by a DS1 interface in the previous 24
|
|
hour interval. Invalid 15 minute intervals count
|
|
as 0."
|
|
::= { dsx1FarEndTotalEntry 9 }
|
|
|
|
|
|
dsx1FarEndTotalDMs OBJECT-TYPE
|
|
SYNTAX PerfTotalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Degraded Minutes (DMs) encountered
|
|
by a DS1 interface in the previous 24 hour
|
|
interval. Invalid 15 minute intervals count as
|
|
0."
|
|
::= { dsx1FarEndTotalEntry 10 }
|
|
|
|
-- The DS1 Fractional Table
|
|
dsx1FracTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dsx1FracEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This table is deprecated in favour of using
|
|
ifStackTable.
|
|
|
|
The table was mandatory for systems dividing a DS1
|
|
into channels containing different data streams
|
|
that are of local interest. Systems which are
|
|
indifferent to data content, such as CSUs, need
|
|
not implement it.
|
|
|
|
The DS1 fractional table identifies which DS1
|
|
channels associated with a CSU are being used to
|
|
support a logical interface, i.e., an entry in the
|
|
interfaces table from the Internet-standard MIB.
|
|
|
|
For example, consider an application managing a
|
|
North American ISDN Primary Rate link whose
|
|
division is a 384 kbit/s H1 _B_ Channel for Video,
|
|
a second H1 for data to a primary routing peer,
|
|
and 12 64 kbit/s H0 _B_ Channels. Consider that
|
|
some subset of the H0 channels are used for voice
|
|
and the remainder are available for dynamic data
|
|
calls.
|
|
|
|
We count a total of 14 interfaces multiplexed onto
|
|
the DS1 interface. Six DS1 channels (for the sake
|
|
of the example, channels 1..6) are used for Video,
|
|
six more (7..11 and 13) are used for data, and the
|
|
remaining 12 are are in channels 12 and 14..24.
|
|
|
|
Let us further imagine that ifIndex 2 is of type
|
|
DS1 and refers to the DS1 interface, and that the
|
|
interfaces layered onto it are numbered 3..16.
|
|
|
|
We might describe the allocation of channels, in
|
|
the dsx1FracTable, as follows:
|
|
dsx1FracIfIndex.2. 1 = 3 dsx1FracIfIndex.2.13 = 4
|
|
dsx1FracIfIndex.2. 2 = 3 dsx1FracIfIndex.2.14 = 6
|
|
dsx1FracIfIndex.2. 3 = 3 dsx1FracIfIndex.2.15 = 7
|
|
dsx1FracIfIndex.2. 4 = 3 dsx1FracIfIndex.2.16 = 8
|
|
dsx1FracIfIndex.2. 5 = 3 dsx1FracIfIndex.2.17 = 9
|
|
dsx1FracIfIndex.2. 6 = 3 dsx1FracIfIndex.2.18 = 10
|
|
dsx1FracIfIndex.2. 7 = 4 dsx1FracIfIndex.2.19 = 11
|
|
dsx1FracIfIndex.2. 8 = 4 dsx1FracIfIndex.2.20 = 12
|
|
dsx1FracIfIndex.2. 9 = 4 dsx1FracIfIndex.2.21 = 13
|
|
dsx1FracIfIndex.2.10 = 4 dsx1FracIfIndex.2.22 = 14
|
|
dsx1FracIfIndex.2.11 = 4 dsx1FracIfIndex.2.23 = 15
|
|
dsx1FracIfIndex.2.12 = 5 dsx1FracIfIndex.2.24 = 16
|
|
|
|
For North American (DS1) interfaces, there are 24
|
|
legal channels, numbered 1 through 24.
|
|
|
|
For G.704 interfaces, there are 31 legal channels,
|
|
numbered 1 through 31. The channels (1..31)
|
|
correspond directly to the equivalently numbered
|
|
time-slots."
|
|
::= { ds1 13 }
|
|
|
|
dsx1FracEntry OBJECT-TYPE
|
|
SYNTAX Dsx1FracEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"An entry in the DS1 Fractional table."
|
|
INDEX { dsx1FracIndex, dsx1FracNumber }
|
|
::= { dsx1FracTable 1 }
|
|
|
|
Dsx1FracEntry ::=
|
|
SEQUENCE {
|
|
dsx1FracIndex INTEGER,
|
|
dsx1FracNumber INTEGER,
|
|
dsx1FracIfIndex INTEGER
|
|
}
|
|
|
|
|
|
dsx1FracIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..'7fffffff'h)
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The index value which uniquely identifies the
|
|
DS1 interface to which this entry is applicable
|
|
The interface identified by a particular
|
|
value of this index is the same interface as
|
|
identified by the same value an dsx1LineIndex
|
|
object instance."
|
|
::= { dsx1FracEntry 1 }
|
|
|
|
dsx1FracNumber OBJECT-TYPE
|
|
SYNTAX INTEGER (1..31)
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The channel number for this entry."
|
|
::= { dsx1FracEntry 2 }
|
|
|
|
dsx1FracIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..'7fffffff'h)
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"An index value that uniquely identifies an
|
|
interface. The interface identified by a particular
|
|
value of this index is the same interface
|
|
as identified by the same value an ifIndex
|
|
object instance. If no interface is currently using
|
|
a channel, the value should be zero. If a
|
|
single interface occupies more than one time
|
|
slot, that ifIndex value will be found in multiple
|
|
time slots."
|
|
::= { dsx1FracEntry 3 }
|
|
|
|
-- Ds1 TRAPS
|
|
|
|
ds1Traps OBJECT IDENTIFIER ::= { ds1 15 }
|
|
|
|
dsx1LineStatusChange NOTIFICATION-TYPE
|
|
OBJECTS { dsx1LineStatus,
|
|
dsx1LineStatusLastChange }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A dsx1LineStatusChange trap is sent when the
|
|
value of an instance dsx1LineStatus changes. It
|
|
can be utilized by an NMS to trigger polls. When
|
|
the line status change results from a higher level
|
|
line status change (i.e. ds3), then no traps for
|
|
the ds1 are sent."
|
|
::= { ds1Traps 0 1 }
|
|
|
|
-- conformance information
|
|
ds1Conformance OBJECT IDENTIFIER ::= { ds1 14 }
|
|
|
|
ds1Groups OBJECT IDENTIFIER ::= { ds1Conformance 1 }
|
|
ds1Compliances OBJECT IDENTIFIER ::= { ds1Conformance 2 }
|
|
|
|
|
|
|
|
-- compliance statements
|
|
|
|
ds1Compliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for T1 and E1
|
|
interfaces."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS { ds1NearEndConfigGroup,
|
|
ds1NearEndStatisticsGroup }
|
|
|
|
GROUP ds1FarEndGroup
|
|
DESCRIPTION
|
|
"Implementation of this group is optional for all
|
|
systems that attach to a DS1 Interface."
|
|
|
|
GROUP ds1NearEndOptionalConfigGroup
|
|
DESCRIPTION
|
|
"Implementation of this group is optional for all
|
|
systems that attach to a DS1 Interface."
|
|
|
|
GROUP ds1DS2Group
|
|
DESCRIPTION
|
|
"Implementation of this group is mandatory for all
|
|
systems that attach to a DS2 Interface."
|
|
|
|
GROUP ds1TransStatsGroup
|
|
DESCRIPTION
|
|
"This group is the set of statistics appropriate
|
|
for all systems which attach to a DS1 Interface
|
|
running transparent or unFramed lineType."
|
|
|
|
|
|
GROUP ds1ChanMappingGroup
|
|
DESCRIPTION
|
|
"This group is the set of objects for mapping a
|
|
DS3 Channel (ds1ChannelNumber) to ifIndex.
|
|
|
|
Implementation of this group is mandatory for
|
|
systems which support the channelization of DS3s
|
|
into DS1s."
|
|
|
|
OBJECT dsx1LineType
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"The ability to set the line type is not
|
|
required."
|
|
|
|
OBJECT dsx1LineCoding
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"The ability to set the line coding is not
|
|
required."
|
|
|
|
OBJECT dsx1SendCode
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"The ability to set the send code is not
|
|
required."
|
|
|
|
OBJECT dsx1LoopbackConfig
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"The ability to set loopbacks is not required."
|
|
|
|
OBJECT dsx1SignalMode
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"The ability to set the signal mode is not
|
|
required."
|
|
|
|
OBJECT dsx1TransmitClockSource
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"The ability to set the transmit clock source is
|
|
not required."
|
|
|
|
OBJECT dsx1Fdl
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"The ability to set the FDL is not required."
|
|
|
|
OBJECT dsx1LineLength
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"The ability to set the line length is not
|
|
required."
|
|
|
|
OBJECT dsx1Channelization
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"The ability to set the channelization is not
|
|
required."
|
|
::= { ds1Compliances 1 }
|
|
|
|
ds1MibT1PriCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Compliance statement for using this MIB for ISDN
|
|
Primary Rate interfaces on T1 lines."
|
|
MODULE
|
|
MANDATORY-GROUPS { ds1NearEndConfigGroup,
|
|
ds1NearEndStatisticsGroup }
|
|
OBJECT dsx1LineType
|
|
SYNTAX INTEGER {
|
|
dsx1ESF(2) -- Intl Spec would be G704(2)
|
|
-- or I.431(4)
|
|
}
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Line type for T1 ISDN Primary Rate
|
|
interfaces."
|
|
|
|
OBJECT dsx1LineCoding
|
|
SYNTAX INTEGER {
|
|
dsx1B8ZS(2)
|
|
}
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Type of Zero Code Suppression for
|
|
T1 ISDN Primary Rate interfaces."
|
|
|
|
OBJECT dsx1SignalMode
|
|
SYNTAX INTEGER {
|
|
none(1), -- if there is no signaling channel
|
|
messageOriented(4)
|
|
}
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Possible signaling modes for
|
|
T1 ISDN Primary Rate interfaces."
|
|
|
|
OBJECT dsx1TransmitClockSource
|
|
SYNTAX INTEGER {
|
|
loopTiming(1)
|
|
}
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"The transmit clock is derived from
|
|
received clock on ISDN Primary Rate
|
|
interfaces."
|
|
|
|
OBJECT dsx1Fdl
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Facilities Data Link usage on T1 ISDN
|
|
Primary Rate interfaces.
|
|
Note: Eventually dsx1Att-54016(4) is to be
|
|
used here since the line type is ESF."
|
|
|
|
OBJECT dsx1Channelization
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"The ability to set the channelization
|
|
is not required."
|
|
::= { ds1Compliances 2 }
|
|
|
|
|
|
ds1MibE1PriCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Compliance statement for using this MIB for ISDN
|
|
Primary Rate interfaces on E1 lines."
|
|
MODULE
|
|
MANDATORY-GROUPS { ds1NearEndConfigGroup,
|
|
ds1NearEndStatisticsGroup }
|
|
OBJECT dsx1LineType
|
|
SYNTAX INTEGER {
|
|
dsx1E1CRC(5)
|
|
}
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Line type for E1 ISDN Primary Rate
|
|
interfaces."
|
|
|
|
OBJECT dsx1LineCoding
|
|
SYNTAX INTEGER {
|
|
dsx1HDB3(3)
|
|
}
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Type of Zero Code Suppression for
|
|
E1 ISDN Primary Rate interfaces."
|
|
|
|
OBJECT dsx1SignalMode
|
|
SYNTAX INTEGER {
|
|
messageOriented(4)
|
|
}
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Signaling on E1 ISDN Primary Rate interfaces
|
|
is always message oriented."
|
|
|
|
OBJECT dsx1TransmitClockSource
|
|
SYNTAX INTEGER {
|
|
loopTiming(1)
|
|
}
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"The transmit clock is derived from received
|
|
clock on ISDN Primary Rate interfaces."
|
|
|
|
OBJECT dsx1Fdl
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Facilities Data Link usage on E1 ISDN
|
|
Primary Rate interfaces.
|
|
Note: There is a 'M-Channel' in E1,
|
|
using National Bit Sa4 (G704,
|
|
Table 4a). It is used to implement
|
|
management features between ET
|
|
and NT. This is different to
|
|
FDL in T1, which is used to carry
|
|
control signals and performance
|
|
data. In E1, control and status
|
|
signals are carried using National
|
|
Bits Sa5, Sa6 and A (RAI Ind.).
|
|
This indicates that only the other(1) or
|
|
eventually the dsx1Fdl-none(8) bits should
|
|
be set in this object for E1 PRI."
|
|
|
|
OBJECT dsx1Channelization
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"The ability to set the channelization is not
|
|
required."
|
|
::= { ds1Compliances 3 }
|
|
|
|
|
|
ds1Ds2Compliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Compliance statement for using this MIB for DS2
|
|
interfaces."
|
|
MODULE
|
|
MANDATORY-GROUPS { ds1DS2Group }
|
|
|
|
OBJECT dsx1Channelization
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"The ability to set the channelization is not
|
|
required."
|
|
::= { ds1Compliances 4 }
|
|
|
|
-- units of conformance
|
|
|
|
ds1NearEndConfigGroup OBJECT-GROUP
|
|
OBJECTS { dsx1LineIndex,
|
|
dsx1TimeElapsed,
|
|
dsx1ValidIntervals,
|
|
dsx1LineType,
|
|
dsx1LineCoding,
|
|
dsx1SendCode,
|
|
dsx1CircuitIdentifier,
|
|
dsx1LoopbackConfig,
|
|
dsx1LineStatus,
|
|
dsx1SignalMode,
|
|
dsx1TransmitClockSource,
|
|
dsx1Fdl,
|
|
dsx1InvalidIntervals,
|
|
dsx1LineLength,
|
|
dsx1LoopbackStatus,
|
|
dsx1Ds1ChannelNumber,
|
|
dsx1Channelization }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing configuration
|
|
information applicable to all DS1 interfaces."
|
|
::= { ds1Groups 1 }
|
|
|
|
ds1NearEndStatisticsGroup OBJECT-GROUP
|
|
OBJECTS { dsx1CurrentIndex,
|
|
dsx1CurrentESs,
|
|
dsx1CurrentSESs,
|
|
dsx1CurrentSEFSs,
|
|
dsx1CurrentUASs,
|
|
dsx1CurrentCSSs,
|
|
dsx1CurrentPCVs,
|
|
dsx1CurrentLESs,
|
|
dsx1CurrentBESs,
|
|
dsx1CurrentDMs,
|
|
dsx1CurrentLCVs,
|
|
dsx1IntervalIndex,
|
|
dsx1IntervalNumber,
|
|
dsx1IntervalESs,
|
|
dsx1IntervalSESs,
|
|
dsx1IntervalSEFSs,
|
|
dsx1IntervalUASs,
|
|
dsx1IntervalCSSs,
|
|
dsx1IntervalPCVs,
|
|
dsx1IntervalLESs,
|
|
dsx1IntervalBESs,
|
|
dsx1IntervalDMs,
|
|
dsx1IntervalLCVs,
|
|
dsx1IntervalValidData,
|
|
dsx1TotalIndex,
|
|
dsx1TotalESs,
|
|
dsx1TotalSESs,
|
|
dsx1TotalSEFSs,
|
|
dsx1TotalUASs,
|
|
dsx1TotalCSSs,
|
|
dsx1TotalPCVs,
|
|
dsx1TotalLESs,
|
|
dsx1TotalBESs,
|
|
dsx1TotalDMs,
|
|
dsx1TotalLCVs }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing statistics
|
|
information applicable to all DS1 interfaces."
|
|
::= { ds1Groups 2 }
|
|
|
|
ds1FarEndGroup OBJECT-GROUP
|
|
OBJECTS { dsx1FarEndCurrentIndex,
|
|
dsx1FarEndTimeElapsed,
|
|
dsx1FarEndValidIntervals,
|
|
dsx1FarEndCurrentESs,
|
|
dsx1FarEndCurrentSESs,
|
|
dsx1FarEndCurrentSEFSs,
|
|
dsx1FarEndCurrentUASs,
|
|
dsx1FarEndCurrentCSSs,
|
|
dsx1FarEndCurrentLESs,
|
|
dsx1FarEndCurrentPCVs,
|
|
dsx1FarEndCurrentBESs,
|
|
dsx1FarEndCurrentDMs,
|
|
dsx1FarEndInvalidIntervals,
|
|
dsx1FarEndIntervalIndex,
|
|
dsx1FarEndIntervalNumber,
|
|
dsx1FarEndIntervalESs,
|
|
dsx1FarEndIntervalSESs,
|
|
dsx1FarEndIntervalSEFSs,
|
|
dsx1FarEndIntervalUASs,
|
|
dsx1FarEndIntervalCSSs,
|
|
dsx1FarEndIntervalLESs,
|
|
dsx1FarEndIntervalPCVs,
|
|
dsx1FarEndIntervalBESs,
|
|
dsx1FarEndIntervalDMs,
|
|
dsx1FarEndIntervalValidData,
|
|
dsx1FarEndTotalIndex,
|
|
dsx1FarEndTotalESs,
|
|
dsx1FarEndTotalSESs,
|
|
dsx1FarEndTotalSEFSs,
|
|
dsx1FarEndTotalUASs,
|
|
dsx1FarEndTotalCSSs,
|
|
dsx1FarEndTotalLESs,
|
|
dsx1FarEndTotalPCVs,
|
|
dsx1FarEndTotalBESs,
|
|
dsx1FarEndTotalDMs }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing remote
|
|
configuration and statistics information."
|
|
::= { ds1Groups 3 }
|
|
|
|
ds1DeprecatedGroup OBJECT-GROUP
|
|
OBJECTS { dsx1IfIndex,
|
|
dsx1FracIndex,
|
|
dsx1FracNumber,
|
|
dsx1FracIfIndex }
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A collection of obsolete objects that may be
|
|
implemented for backwards compatibility."
|
|
::= { ds1Groups 4 }
|
|
|
|
ds1NearEndOptionalConfigGroup OBJECT-GROUP
|
|
OBJECTS { dsx1LineStatusLastChange,
|
|
dsx1LineStatusChangeTrapEnable }
|
|
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects that may be implemented
|
|
on DS1 and DS2 interfaces."
|
|
::= { ds1Groups 5 }
|
|
|
|
ds1DS2Group OBJECT-GROUP
|
|
OBJECTS { dsx1LineIndex,
|
|
dsx1LineType,
|
|
dsx1LineCoding,
|
|
dsx1SendCode,
|
|
dsx1LineStatus,
|
|
dsx1SignalMode,
|
|
dsx1TransmitClockSource,
|
|
dsx1Channelization }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing information
|
|
about DS2 (6,312 kbps) and E2 (8,448 kbps)
|
|
systems."
|
|
::= { ds1Groups 6 }
|
|
|
|
ds1TransStatsGroup OBJECT-GROUP
|
|
OBJECTS { dsx1CurrentESs,
|
|
dsx1CurrentSESs,
|
|
dsx1CurrentUASs,
|
|
dsx1IntervalESs,
|
|
dsx1IntervalSESs,
|
|
dsx1IntervalUASs,
|
|
dsx1TotalESs,
|
|
dsx1TotalSESs,
|
|
dsx1TotalUASs }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects which are the
|
|
statistics which can be collected from a ds1
|
|
interface that is running transparent or unframed
|
|
lineType. Statistics not in this list should
|
|
return noSuchInstance."
|
|
::= { ds1Groups 7 }
|
|
|
|
ds1NearEndOptionalTrapGroup NOTIFICATION-GROUP
|
|
NOTIFICATIONS { dsx1LineStatusChange }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of notifications that may be
|
|
implemented on DS1 and DS2 interfaces."
|
|
::= { ds1Groups 8 }
|
|
|
|
ds1ChanMappingGroup OBJECT-GROUP
|
|
OBJECTS { dsx1ChanMappedIfIndex }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects that give an mapping of
|
|
DS3 Channel (ds1ChannelNumber) to ifIndex."
|
|
::= { ds1Groups 9 }
|
|
|
|
END
|