mibs/MIBS/junos/JUNIPER-ALARM-EXT-MIB
2023-12-05 12:25:34 +01:00

90 lines
2.6 KiB
Plaintext

--
-- Juniper Enterprise Specific MIB: Ping MIB
--
-- Copyright (c) 2001-2013, Juniper Networks, Inc.
-- All rights reserved.
--
-- The contents of this document are subject to change without notice.
--
JUNIPER-ALARM-EXT-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE
FROM SNMPv2-SMI
TEXTUAL-CONVENTION, DateAndTime
FROM SNMPv2-TC -- [RFC2579]
alarmClearEntry
FROM ALARM-MIB
jnxMibs, jnxAlarmExtMibRoot
FROM JUNIPER-SMI;
jnxAlarmMIB MODULE-IDENTITY
LAST-UPDATED "201209041502Z" -- Tue Sept 2 15:02:46 2012 UTC
ORGANIZATION "Juniper Networks, Inc."
CONTACT-INFO
" Juniper Technical Assistance Center
Juniper Networks, Inc.
1133 Innovation Way
Sunnyvale, CA 94089
E-mail: support@juniper.net"
DESCRIPTION
"This is Juniper Networks' implementation of enterprise
specific MIB for alarms from the router chassis box."
::= { jnxAlarmExtMibRoot 1 }
jnxAlarmObjects OBJECT IDENTIFIER ::= { jnxAlarmMIB 1 }
-- Extension to Clear table.
-- Some systems may have a requirement that information
-- on alarms that are no longer active be available.
-- This memo provides a clear table to support this
-- requirement. Though Clear table provides the history
-- of alarms raised, it doesn't the datAndTime when the
-- alarm was rasied. This information is critical.
-- A new table is deined that extends the alarmClearTable
-- by AUGENTING it. This table will provide dateAndTime
-- a particular which is no longer active was raised.
--
-- Alarm Clear Table Extensions
--
jnxAlarmClearTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxAlarmClearEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" This table augments alarmClearTable. This table
contains additional object needed to indicate
DateAndTime when a particular alarm was raised."
::= { jnxAlarmObjects 1}
jnxAlarmClearEntry OBJECT-TYPE
SYNTAX JnxAlarmClearEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" An entry containing additional information
applicable to a particular entry in alarm
ClearTable."
AUGMENTS { alarmClearEntry }
::= { jnxAlarmClearTable 1 }
JnxAlarmClearEntry ::=
SEQUENCE {
jnxAlarmClearActiveDateAndTime DateAndTime
}
jnxAlarmClearActiveDateAndTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This object indicates DateAndTime, when
current alarm was raised."
::= { jnxAlarmClearEntry 1 }
END