david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
98a672123c
mibs/MIBS/junos/JUNIPER-ATM-COS-MIB
David Leutgeb 98a672123c Initial commit
2023-12-05 12:25:34 +01:00

671 lines
23 KiB
Plaintext
Raw Blame History

-- *******************************************************************
-- Juniper enterprise specific ATM Class Of Service MIB.
--
-- Copyright (c) 2002-2004, Juniper Networks, Inc.
-- All rights reserved.
--
-- The contents of this document are subject to change without notice.
-- *******************************************************************
JUNIPER-ATM-COS-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,
Integer32, Counter64 FROM SNMPv2-SMI
ifIndex FROM IF-MIB
atmVclVpi, atmVclVci FROM ATM-MIB
jnxMibs FROM JUNIPER-SMI
jnxCosFcId FROM JUNIPER-COS-MIB;
jnxAtmCos MODULE-IDENTITY
LAST-UPDATED "200304090000Z" -- Fri Apr 09 2004 UTC
ORGANIZATION "Juniper Networks, Inc."
CONTACT-INFO
"Juniper Technical Assistance Center
Juniper Networks, Inc.
1133 Innovation Way
Sunnyvale, CA 94089
E-mail: support@juniper.net"
DESCRIPTION
"The Juniper enterprise MIB for ATM COS (Class Of
Service) infrastructure. For detailed information on ATM
COS, Junos Documentation is recommended as the
reference.
Abbreviations:
COS - Class Of Service
RED - Random Early Detection
PLP - Packet Loss Priority"
REVISION "200304090000Z" -- Fri Apr 09 2004 UTC
DESCRIPTION "Exposed jnxCosAtmTrunkTable for COS enabled Trunks."
REVISION "200306200000Z" -- Jun 20th 2003
DESCRIPTION "Add Per queue PLP stats for COS enabled VCs."
REVISION "200209040000Z" -- Sep 4th 2002
DESCRIPTION "Initial Version."
::= { jnxMibs 21 }
--
-- ATM COS VC Table : represents VCs that have COS configured.
--
jnxCosAtmVcTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxCosAtmVcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of ATM VCs which have COS configured."
::= { jnxAtmCos 1 }
jnxCosAtmVcEntry OBJECT-TYPE
SYNTAX JnxCosAtmVcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entry contains COS info specific to an ATM VC.
Each entry is indexed using ifIndex, vpi and vci of
the VC."
INDEX { ifIndex, atmVclVpi, atmVclVci}
::= { jnxCosAtmVcTable 1 }
JnxCosAtmVcEntry ::=
SEQUENCE {
jnxCosAtmVcCosMode INTEGER
}
jnxCosAtmVcCosMode OBJECT-TYPE
SYNTAX INTEGER {
strict(0),
alternate(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mode of COS queue priority for the VC.
strict mode :
One queue of the four queues has strict high priority and
is always serviced before the rest of the queues. The
remaining queues are serviced in round robin fashion.
alternate mode :
One queue has high priority, but the servicing of the
queues alternates between the high priority queue and the
rest of the queues."
::= { jnxCosAtmVcEntry 1 }
--
-- ATM VC scheduler table
--
jnxCosAtmVcScTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxCosAtmVcScEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of rows representing atm-scheduler config
parameters for each forwarding class within a specified VC.
NOTE: These schedulers are specific to an atm interface and
are different from the typical schedulers specified under
class-of-service config in CLI. Hence, hereafter, through
out this mib, scheduler will be referred to as atm-scheduler
to avoid any confusion."
::= { jnxAtmCos 2 }
jnxCosAtmVcScEntry OBJECT-TYPE
SYNTAX JnxCosAtmVcScEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entry represents atm-scheduler config parameters per
forwarding class and per VC."
INDEX { ifIndex, atmVclVpi, atmVclVci, jnxCosFcId }
::= { jnxCosAtmVcScTable 1 }
JnxCosAtmVcScEntry ::=
SEQUENCE {
-- Scheduler parameters
jnxCosAtmVcScPriority INTEGER,
jnxCosAtmVcScTxWeightType INTEGER,
jnxCosAtmVcScTxWeight Integer32,
-- Drop profile type
jnxCosAtmVcScDpType INTEGER,
-- Linear RED drop profile info
jnxCosAtmVcScLrdpQueueDepth Integer32,
jnxCosAtmVcScLrdpLowPlpThresh Integer32,
jnxCosAtmVcScLrdpHighPlpThresh Integer32,
-- Epd Drop profile
jnxCosAtmVcEpdThreshold Integer32
}
-- Atm-scheduler parameters
jnxCosAtmVcScPriority OBJECT-TYPE
SYNTAX INTEGER {
low(0),
high(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The atm-scheduler priority for the queue associated with
the specified forwarding class within the specified VC."
::= { jnxCosAtmVcScEntry 1 }
jnxCosAtmVcScTxWeightType OBJECT-TYPE
SYNTAX INTEGER {
cells(0),
percent(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The atm-scheduler transmit-weight-type for the queue
associated with the specified forwarding class inside the
specified VC.
An atm-scheduler can specify the transmit-weight-type either
as number of cells or as a percentage of the queue size."
::= { jnxCosAtmVcScEntry 2 }
jnxCosAtmVcScTxWeight OBJECT-TYPE
SYNTAX Integer32(0..32000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The atm-scheduler's transmit weight for the queue
associated with the specified forwarding class and the
specified VC. This object value is either expressed in
units of cells or as a percentage of the total VC
bandwidth. The unit (value-type) can be determined using
the object jnxCosAtmVcScTxWeightType."
::= { jnxCosAtmVcScEntry 3 }
jnxCosAtmVcScDpType OBJECT-TYPE
SYNTAX INTEGER {
linearRed(0),
epd(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of RED drop profile configured for the specified
forwarding class within the specified VC. A scheduler can
specify either linear or constant drop profile.
A constant type drop profile (aka EPD) specifies that when
the number of queued cells exceeds a threshold, all the
cells should be dropped. Whereas a linear type drop profile
specifies that only a percentage of cells be dropped based
on the number of queued cells at any time."
::= { jnxCosAtmVcScEntry 4 }
jnxCosAtmVcScLrdpQueueDepth OBJECT-TYPE
SYNTAX Integer32(0..32000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum queue size in cells, as specified by the linear
RED drop profile associated with the specified forwarding
class within the specified VC.
This object is valid only when value of object
jnxCosAtmVcScDpType is 'linearRed(0)'."
::= { jnxCosAtmVcScEntry 5 }
jnxCosAtmVcScLrdpLowPlpThresh OBJECT-TYPE
SYNTAX Integer32(0..32000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The threshold percentage of fill-level beyond which low PLP
(Packet Loss Priority) packets belonging to the specified
forwarding class within the specified VC are randomly
dropped. This value is specified by linear RED drop profile
config.
This object is valid only when value of object
jnxCosAtmVcScDpType is 'linearRed(0)'."
::= { jnxCosAtmVcScEntry 6 }
jnxCosAtmVcScLrdpHighPlpThresh OBJECT-TYPE
SYNTAX Integer32(0..32000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The threshold percentage of fill-level beyond which high
PLP (Packet Loss Priority) packets belonging to the
specified forwarding class within the specified VC are
randomly dropped. This value is specified by linear RED drop
profile config.
This object is valid only when jnxCosAtmVcScDpType is
'linearRed(0)'."
::= { jnxCosAtmVcScEntry 7 }
jnxCosAtmVcEpdThreshold OBJECT-TYPE
SYNTAX Integer32(0..32000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If a EPD type drop profile is configured for this scheduler
and if the number of cells queued exceeds this threshold
value, all the cells in the queue are dropped.
This object has valid value only when jnxCosAtmVcScDpType
is 'epd(1)'."
::= { jnxCosAtmVcScEntry 8 }
--
-- ATM COS Queue Stats Table.
--
jnxCosAtmVcQstatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxCosAtmVcQstatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of per VC and per forwarding class queue stats
entries."
::= { jnxAtmCos 3 }
jnxCosAtmVcQstatsEntry OBJECT-TYPE
SYNTAX JnxCosAtmVcQstatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entry contains queue stats for a specified
forwarding class and specified VC."
INDEX { ifIndex, atmVclVpi, atmVclVci, jnxCosFcId }
::= { jnxCosAtmVcQstatsTable 1 }
JnxCosAtmVcQstatsEntry ::=
SEQUENCE {
jnxCosAtmVcQstatsOutPackets Counter64,
jnxCosAtmVcQstatsOutBytes Counter64,
jnxCosAtmVcQstatsOutRedDropPkts Counter64,
jnxCosAtmVcQstatsOutNonRedDrops Counter64,
-- PLP traffic stats
jnxCosAtmVcQstatsOutLpBytes Counter64,
jnxCosAtmVcQstatsOutLpPkts Counter64,
-- PLP drop stats
jnxCosAtmVcQstatsOutLpDropBytes Counter64,
jnxCosAtmVcQstatsOutHpDropBytes Counter64,
jnxCosAtmVcQstatsOutLpDropPkts Counter64,
jnxCosAtmVcQstatsOutHpDropPkts Counter64
}
jnxCosAtmVcQstatsOutPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets belonging to the specified
forwarding class transmitted on the specified VC."
::= { jnxCosAtmVcQstatsEntry 1 }
jnxCosAtmVcQstatsOutBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of bytes belonging to the specified forwarding
class that were transmitted on the specified VC."
::= { jnxCosAtmVcQstatsEntry 2 }
jnxCosAtmVcQstatsOutRedDropPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of outgoing packets on the specified VC and
belonging to the specified forwarding class, that were
RED-dropped."
::= { jnxCosAtmVcQstatsEntry 3 }
jnxCosAtmVcQstatsOutNonRedDrops OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of outgoing packets on the specified VC and
belonging to the specified forwarding class, that were
dropped not as a result of RED mechanism, but because of
errors in packets."
::= { jnxCosAtmVcQstatsEntry 4 }
-- PLP traffic stats
jnxCosAtmVcQstatsOutLpBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of low PLP (PLP0) bytes transmitted."
::= { jnxCosAtmVcQstatsEntry 5 }
jnxCosAtmVcQstatsOutLpPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of low PLP (PLP0) packets transmitted."
::= { jnxCosAtmVcQstatsEntry 6 }
-- PLP drop stats
jnxCosAtmVcQstatsOutLpDropBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of low PLP (PLP0) bytes dropped at the output
queue."
::= { jnxCosAtmVcQstatsEntry 7 }
jnxCosAtmVcQstatsOutHpDropBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of high PLP (PLP1) bytes dropped at the output
queue."
::= { jnxCosAtmVcQstatsEntry 8 }
jnxCosAtmVcQstatsOutLpDropPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of low PLP (PLP0) packets dropped at the
output queue."
::= { jnxCosAtmVcQstatsEntry 9 }
jnxCosAtmVcQstatsOutHpDropPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of high PLP (PLP1) packets dropped at the
output queue."
::= { jnxCosAtmVcQstatsEntry 10 }
--
-- Juniper ATM Trunk Class of Service Table
--
jnxCosAtmTrunkTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxCosAtmTrunkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of all ATM Trunk CoS entries. Stats and configuration
information is provided for each ATM Trunk CoS interface."
::= { jnxAtmCos 4 }
jnxCosAtmTrunkEntry OBJECT-TYPE
SYNTAX JnxCosAtmTrunkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A single ATM Trunk CoS Entry."
INDEX { ifIndex, jnxCosFcId }
::= { jnxCosAtmTrunkTable 1 }
JnxCosAtmTrunkEntry ::=
SEQUENCE {
-- Trunk CoS parameters
jnxCosAtmTrunkMode INTEGER,
-- Scheduler parameters
jnxCosAtmTrunkScPriority INTEGER,
jnxCosAtmTrunkScTxWeightType INTEGER,
jnxCosAtmTrunkScTxWeight Integer32,
jnxCosAtmTrunkQaType INTEGER,
-- Epd Drop profile
jnxCosAtmTrunkEpdThresholdPlp0 Integer32,
jnxCosAtmTrunkEpdThresholdPlp1 Integer32,
-- Queue stats
jnxCosAtmTrunkQstatsOutPackets Counter64,
jnxCosAtmTrunkQstatsOutBytes Counter64,
jnxCosAtmTrunkQstatsOutDrops Counter64,
-- Low PLP (PLP0) traffic stats
jnxCosAtmTrunkQstatsOutLpBytes Counter64,
jnxCosAtmTrunkQstatsOutLpPkts Counter64,
-- PLP drop stats
jnxCosAtmTrunkQstatsOutLpDropBytes Counter64,
jnxCosAtmTrunkQstatsOutHpDropBytes Counter64,
jnxCosAtmTrunkQstatsOutLpDropPkts Counter64,
jnxCosAtmTrunkQstatsOutHpDropPkts Counter64,
-- High PLP (PLP1) traffic stats
jnxCosAtmTrunkQstatsOutHpBytes Counter64,
jnxCosAtmTrunkQstatsOutHpPkts Counter64
}
jnxCosAtmTrunkMode OBJECT-TYPE
SYNTAX INTEGER {
strict(1),
alternate(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mode of COS queue priority for the Trunk.
strict mode :
One queue of the four queues has strict high priority and
is always serviced before the rest of the queues. The
remaining queues are serviced in round robin fashion.
alternate mode :
One queue has high priority, but the servicing of the
queues alternates between the high priority queue and the
rest of the queues."
::= { jnxCosAtmTrunkEntry 1 }
-- Atm-scheduler parameters
jnxCosAtmTrunkScPriority OBJECT-TYPE
SYNTAX INTEGER {
low(1),
high(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The atm-scheduler priority for the queue associated with
the specified forwarding class within the specified Trunk."
::= { jnxCosAtmTrunkEntry 2 }
jnxCosAtmTrunkScTxWeightType OBJECT-TYPE
SYNTAX INTEGER {
cells(1),
percent(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The atm-scheduler transmit-weight-type for the queue
associated with the specified forwarding class inside the
specified Trunk.
An atm-scheduler can specify the transmit-weight-type either
as number of cells or as a percentage of the queue size."
::= { jnxCosAtmTrunkEntry 3 }
jnxCosAtmTrunkScTxWeight OBJECT-TYPE
SYNTAX Integer32(0..32000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The atm-scheduler's transmit weight for the queue
associated with the specified forwarding class and the
specified Trunk. This object value is either expressed in
units of cells or as a percentage of the total Trunk
bandwidth. The unit (value-type) can be determined using
the object jnxCosAtmTrunkScTxWeightType."
::= { jnxCosAtmTrunkEntry 4 }
jnxCosAtmTrunkQaType OBJECT-TYPE
SYNTAX INTEGER {
red(1),
singleEpd(2),
dualEpd(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The atm queue admission type used for the specified Trunk."
::= { jnxCosAtmTrunkEntry 5 }
jnxCosAtmTrunkEpdThresholdPlp0 OBJECT-TYPE
SYNTAX Integer32(0..32000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If an EPD type drop profile is configured for this
scheduler and if the number of cells queued exceeds this
threshold value, all the cells which have plp equal to 0
will be dropped.
This object has valid value only when jnxCosAtmTrunkQaType
is singleEpd or dualEpd."
::= { jnxCosAtmTrunkEntry 6 }
jnxCosAtmTrunkEpdThresholdPlp1 OBJECT-TYPE
SYNTAX Integer32(0..32000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If a EPD type drop profile is configured for this scheduler
and if the number of cells queued exceeds this threshold
value, all the cells which have plp equal to 1 will be
dropped.
This object has valid value only when jnxCosAtmTrunkQaType
is dualEpd."
::= { jnxCosAtmTrunkEntry 7 }
jnxCosAtmTrunkQstatsOutPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets belonging to the specified
forwarding class transmitted on the specified Trunk."
::= { jnxCosAtmTrunkEntry 8 }
jnxCosAtmTrunkQstatsOutBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of bytes belonging to the specified forwarding
class that were transmitted on the specified Trunk."
::= { jnxCosAtmTrunkEntry 9 }
jnxCosAtmTrunkQstatsOutDrops OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of outgoing packets on the specified Trunk and
belonging to the specified forwarding class, that were
dropped."
::= { jnxCosAtmTrunkEntry 10 }
-- PLP traffic stats
jnxCosAtmTrunkQstatsOutLpBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of low PLP (PLP0) bytes transmitted."
::= { jnxCosAtmTrunkEntry 11 }
jnxCosAtmTrunkQstatsOutLpPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of low PLP (PLP0) packets transmitted."
::= { jnxCosAtmTrunkEntry 12 }
-- PLP drop stats
jnxCosAtmTrunkQstatsOutLpDropBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of low PLP (PLP0) bytes dropped at the output
queue."
::= { jnxCosAtmTrunkEntry 13 }
jnxCosAtmTrunkQstatsOutHpDropBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of high PLP (PLP1) bytes dropped at the output
queue."
::= { jnxCosAtmTrunkEntry 14 }
jnxCosAtmTrunkQstatsOutLpDropPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of low PLP (PLP0) packets dropped at the
output queue."
::= { jnxCosAtmTrunkEntry 15 }
jnxCosAtmTrunkQstatsOutHpDropPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of high PLP (PLP1) packets dropped at the
output queue."
::= { jnxCosAtmTrunkEntry 16 }
jnxCosAtmTrunkQstatsOutHpBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of high PLP (PLP1) bytes transmitted."
::= { jnxCosAtmTrunkEntry 17 }
jnxCosAtmTrunkQstatsOutHpPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of high PLP (PLP1) packets transmitted."
::= { jnxCosAtmTrunkEntry 18 }
END
Reference in New Issue View Git Blame Copy Permalink