990 lines
33 KiB
Plaintext
990 lines
33 KiB
Plaintext
--
|
|
-- Juniper Enterprise Specific ATM MIB.
|
|
--
|
|
-- Copyright (c) 2001-2004, Juniper Networks, Inc.
|
|
-- All rights reserved.
|
|
--
|
|
-- The contents of this document are subject to change without notice.
|
|
--
|
|
|
|
JUNIPER-ATM-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE,
|
|
Integer32, Counter32, Counter64
|
|
FROM SNMPv2-SMI
|
|
TEXTUAL-CONVENTION
|
|
FROM SNMPv2-TC
|
|
InetAddressIPv4, InetAddressIPv6
|
|
FROM INET-ADDRESS-MIB
|
|
ifIndex
|
|
FROM IF-MIB
|
|
atmInterfaceConfEntry, atmVclEntry, atmVplEntry
|
|
FROM ATM-MIB
|
|
jnxMibs
|
|
FROM JUNIPER-SMI;
|
|
|
|
jnxAtm MODULE-IDENTITY
|
|
LAST-UPDATED "200312040000Z" -- Thu Dec 4 2003 UTC
|
|
ORGANIZATION "Juniper Networks, Inc."
|
|
CONTACT-INFO
|
|
"Juniper Technical Assistance Center
|
|
Juniper Networks, Inc.
|
|
1133 Innovation Way
|
|
Sunnyvale, CA 94089
|
|
E-mail: support@juniper.net"
|
|
|
|
DESCRIPTION
|
|
"The Juniper enterprise MIB for ATM interfaces and VCs"
|
|
|
|
REVISION "200401060000Z" -- Tue Jan 06 2004
|
|
DESCRIPTION "The following new objects were added:
|
|
- jnxAtmVCOutOAMF5AISCells (jnxAtmVCTable).
|
|
- jnxAtmTrunkOutOAMF4AISCells (jnxAtmTrunkTable)."
|
|
|
|
REVISION "200312040000Z" -- Thu Dec 4 2003 UTC
|
|
DESCRIPTION "New object 'jnxAtmIfL2CircuitMode' added to jnxAtmIfTable."
|
|
|
|
REVISION "200309170000Z" -- Wed Sept 17 2003
|
|
DESCRIPTION "New table 'jnxAtmTrunkTable' added."
|
|
|
|
REVISION "200207040000Z" -- 4th July 2002
|
|
DESCRIPTION "New table 'jnxAtmVpTable' added."
|
|
|
|
REVISION "200201230000Z" -- 23 Jan 2002
|
|
DESCRIPTION "Renamed atmTcc as atmTccVcMux.
|
|
atmTccSnap encapsulation added."
|
|
|
|
REVISION "200107080000Z" -- 8 July, 2001
|
|
DESCRIPTION "Initial Version"
|
|
|
|
::= { jnxMibs 10 }
|
|
|
|
|
|
|
|
JnxAtmFlags ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Flags related to the VC or Trunk."
|
|
SYNTAX BITS {
|
|
inverseArpEnabled(0),
|
|
ilmiEnabled(1),
|
|
oamEnabled(2),
|
|
shapingEnabled(3),
|
|
passiveOam(4),
|
|
multicast(5),
|
|
closed(6),
|
|
down(7),
|
|
active(8),
|
|
cosEnabled(9)
|
|
}
|
|
|
|
|
|
-- The ATM Physical Interface Table
|
|
--
|
|
-- This table augments atmInterfaceConfTable defined in ATM-MIB.
|
|
--
|
|
jnxAtmIfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JnxAtmIfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains config and stats parameters, one entry per
|
|
physical interface (ATM port)."
|
|
|
|
|
|
::= { jnxAtm 1 }
|
|
|
|
jnxAtmIfEntry OBJECT-TYPE
|
|
SYNTAX JnxAtmIfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This entry contains additional ATM interface config and stats
|
|
objects, not covered in standard mibs. Each entry is an extension
|
|
of atmInterfaceConfEntry defined in ATM-MIB."
|
|
AUGMENTS { atmInterfaceConfEntry }
|
|
::= { jnxAtmIfTable 1 }
|
|
|
|
JnxAtmIfEntry ::=
|
|
SEQUENCE {
|
|
-- Config Info
|
|
jnxAtmIfPortType INTEGER,
|
|
jnxAtmIfEncaps INTEGER,
|
|
jnxAtmIfLpBackInfo INTEGER,
|
|
jnxAtmIfScrambleEnable INTEGER,
|
|
|
|
-- Cell Stats
|
|
jnxAtmIfTxCellCount Counter64,
|
|
jnxAtmIfRxCellCount Counter64,
|
|
jnxAtmIfTxIdleCellCount Counter64,
|
|
jnxAtmIfUncorrHCSErrs Counter64,
|
|
jnxAtmIfCorrHCSErrs Counter64,
|
|
jnxAtmIfTxCellFIFOOverRuns Counter64,
|
|
jnxAtmIfRxCellFIFOOverRuns Counter64,
|
|
jnxAtmIfRxCellFIFOUnderRuns Counter64,
|
|
jnxAtmIfInInvalidVCCells Counter64,
|
|
jnxAtmIfInNoBufferOAMCells Counter64,
|
|
|
|
-- AAL5 Packet stats
|
|
jnxAtmIfInNoBufDropPkts Counter64,
|
|
jnxAtmIfOutVCQueueDrops Counter64,
|
|
jnxAtmIfInBadCrcs Counter64,
|
|
jnxAtmIfInLenErrPkts Counter64,
|
|
jnxAtmIfInTimeoutPkts Counter64,
|
|
|
|
-- Misc Info
|
|
jnxAtmIfL2CircuitMode INTEGER
|
|
}
|
|
|
|
jnxAtmIfPortType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
oc3(2),
|
|
oc12(3),
|
|
t3(4),
|
|
e3(5),
|
|
oc48(6)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The physical port type."
|
|
::= { jnxAtmIfEntry 1 }
|
|
|
|
jnxAtmIfEncaps OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
atmPvc(2),
|
|
atmCccCellRelay(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ATM physical link layer encapsulation."
|
|
DEFVAL { atmPvc }
|
|
::= { jnxAtmIfEntry 2 }
|
|
|
|
jnxAtmIfLpBackInfo OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noLoopBack(1),
|
|
localLoopBack(2),
|
|
remoteLoopBack(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Loop back config and type."
|
|
::= { jnxAtmIfEntry 3 }
|
|
|
|
jnxAtmIfScrambleEnable OBJECT-TYPE
|
|
SYNTAX INTEGER { enabled(1), disabled(2) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Shows whether scrambling is enabled or disabled"
|
|
DEFVAL { disabled }
|
|
::= { jnxAtmIfEntry 4 }
|
|
|
|
-- Cell Stats
|
|
jnxAtmIfTxCellCount OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of ATM cells transmitted by the interface.
|
|
Includes Idle cells transmitted."
|
|
::= { jnxAtmIfEntry 5 }
|
|
|
|
jnxAtmIfRxCellCount OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of ATM cells received by the interface.
|
|
Excludes Idle cells received."
|
|
::= { jnxAtmIfEntry 6 }
|
|
|
|
jnxAtmIfTxIdleCellCount OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of idle cells sent by the port. When the ATM interface
|
|
has nothing to send, it sends idle cells to fill the time slot."
|
|
::= { jnxAtmIfEntry 7 }
|
|
|
|
jnxAtmIfUncorrHCSErrs OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of uncorrectable cell Header Check Sequence (HCS) Errors
|
|
that occurred."
|
|
::= { jnxAtmIfEntry 8 }
|
|
|
|
jnxAtmIfCorrHCSErrs OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of correctable cell Header Check Sequence (HCS) Errors
|
|
that occurred."
|
|
::= { jnxAtmIfEntry 9 }
|
|
|
|
jnxAtmIfTxCellFIFOOverRuns OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of overruns in the Transmit FIFO."
|
|
::= { jnxAtmIfEntry 10 }
|
|
|
|
jnxAtmIfRxCellFIFOOverRuns OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of overruns in the Receive FIFO."
|
|
::= { jnxAtmIfEntry 11 }
|
|
|
|
jnxAtmIfRxCellFIFOUnderRuns OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of underruns in the receive FIFO."
|
|
::= { jnxAtmIfEntry 12 }
|
|
|
|
jnxAtmIfInInvalidVCCells OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Cells that arrived for non existent VC."
|
|
::= { jnxAtmIfEntry 13 }
|
|
|
|
jnxAtmIfInNoBufferOAMCells OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of received OAM cells or raw cells dropped because
|
|
no buffers were available to handle them."
|
|
::= { jnxAtmIfEntry 14 }
|
|
|
|
|
|
-- AAL5 Pkt Stats
|
|
jnxAtmIfInNoBufDropPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of AAL5 packets dropped because there was no enough
|
|
buffer to handle them."
|
|
::= { jnxAtmIfEntry 15 }
|
|
|
|
jnxAtmIfOutVCQueueDrops OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packets dropped because of queue limits on each VC."
|
|
::= { jnxAtmIfEntry 16 }
|
|
|
|
jnxAtmIfInBadCrcs OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of incoming CRC errors."
|
|
::= { jnxAtmIfEntry 17 }
|
|
|
|
jnxAtmIfInLenErrPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of AAL5 packets dropped because their length was incorrect."
|
|
::= { jnxAtmIfEntry 18 }
|
|
|
|
jnxAtmIfInTimeoutPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of AAL5 packets dropped because of reassembly timeout."
|
|
::= { jnxAtmIfEntry 19 }
|
|
|
|
jnxAtmIfL2CircuitMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notApplicable(1),
|
|
none(2),
|
|
aal5(3),
|
|
cell(4),
|
|
uniTrunk(5),
|
|
nniTrunk(6)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The layer 2 circuit mode of this Atm interface. Note, this
|
|
applies only to interfaces on AtmII pics."
|
|
::= { jnxAtmIfEntry 20 }
|
|
|
|
--
|
|
-- Juniper ATM Virtual Circuit Table
|
|
--
|
|
-- This table augments the atmVclTable defined in ATM-MIB.
|
|
--
|
|
jnxAtmVCTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JnxAtmVCEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of all p2p/p2mp/multicast VC entries."
|
|
|
|
|
|
::= { jnxAtm 2 }
|
|
|
|
jnxAtmVCEntry OBJECT-TYPE
|
|
SYNTAX JnxAtmVCEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Special Cases:
|
|
- No traffic Stats for multicast VCs. (0 by default).
|
|
- Multipoint Destination IP Address for a p2p vc is
|
|
invalid (0.0.0.0 by default).
|
|
- When the encapsulation type for the logical interface
|
|
(to which VC belongs) is 'atmCccCellRelay', only
|
|
Generic VC Info is valid.
|
|
- If OAM is disabled (indicated in jnxAtmVCFlags),
|
|
then all the OAM config & F5 stats info is invalid.
|
|
(zeroed by default)."
|
|
AUGMENTS { atmVclEntry }
|
|
::= { jnxAtmVCTable 1 }
|
|
|
|
JnxAtmVCEntry ::=
|
|
SEQUENCE {
|
|
-- Generic VC Info
|
|
jnxAtmVCConnType INTEGER,
|
|
jnxAtmVCEncapsulation INTEGER,
|
|
jnxAtmVCMpDestIPv4Addr InetAddressIPv4,
|
|
jnxAtmVCMpDestIPv6Addr InetAddressIPv6,
|
|
jnxAtmVCFlags JnxAtmFlags,
|
|
jnxAtmVCTotalDownTime Integer32,
|
|
|
|
-- Traffic stats
|
|
jnxAtmVCInBytes Counter64,
|
|
jnxAtmVCOutBytes Counter64,
|
|
jnxAtmVCInPkts Counter64,
|
|
jnxAtmVCOutPkts Counter64,
|
|
jnxAtmVCTailQueuePktDrops Counter64,
|
|
|
|
-- OAM Config
|
|
jnxAtmVCOAMPeriod Integer32,
|
|
jnxAtmVCOAMUpCellCount Integer32,
|
|
jnxAtmVCOAMDownCellCount Integer32,
|
|
|
|
-- OAM F5 Cell Stats
|
|
jnxAtmVCInOAMF5LoopCells Counter32,
|
|
jnxAtmVCOutOAMF5LoopCells Counter32,
|
|
jnxAtmVCInOAMF5RDICells Counter32,
|
|
jnxAtmVCOutOAMF5RDICells Counter32,
|
|
jnxAtmVCInOAMF5AISCells Counter32,
|
|
jnxAtmVCOutOAMF5AISCells Counter32
|
|
}
|
|
|
|
jnxAtmVCConnType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
p2p(2), -- point-to-point
|
|
p2mp(3), -- point-to-multipoint
|
|
multicast(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of connection. The type 'other' means vc type is unknown
|
|
or is not one of the other types."
|
|
::= { jnxAtmVCEntry 1 }
|
|
|
|
jnxAtmVCEncapsulation OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
atmCccCellRelay(2),
|
|
atmCccVcMux(3),
|
|
atmCiscoNlpid(4),
|
|
atmNlpid(5),
|
|
atmSnap(6),
|
|
atmVcMux(7),
|
|
atmTccVcMux(8),
|
|
atmTccSnap(9)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The atm encapsulation type associated with the VC.
|
|
atmCccCellRelay : ATM Cell Relay for CCC
|
|
atmCccVcMux : ATM VC for CCC
|
|
atmCiscoNlpid : Cisco-compatible ATM NLPID encapsulation
|
|
atmNlpid : ATM NLPID encapsulation
|
|
atmSnap : ATM LLC/SNAP encapsulation
|
|
atmVcMux : ATM VC multiplexing
|
|
atmTccVcMux : TCC (Translational Cross Connection)
|
|
over ATM VC MUX encapsulation
|
|
atmTccSnap : TCC (Translational Cross Connection)
|
|
over ATM LLC/SNAP encapsulation"
|
|
::= { jnxAtmVCEntry 2}
|
|
|
|
jnxAtmVCMpDestIPv4Addr OBJECT-TYPE
|
|
SYNTAX InetAddressIPv4
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is meaningful only if jnxAtmVCConnType value is
|
|
'p2mp' (point-to-multipoint). For a p2mp VC, it's the multipoint
|
|
destination IPv4 address. When the VC connection type is other
|
|
than p2mp OR when the multipoint destination address type is of
|
|
IPv6, this object returns 0.0.0.0 by default."
|
|
::= { jnxAtmVCEntry 3 }
|
|
|
|
jnxAtmVCMpDestIPv6Addr OBJECT-TYPE
|
|
SYNTAX InetAddressIPv6
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is meaningful only if jnxAtmVCConnType value is
|
|
'p2mp' (point-to-multipoint). For a p2mp VC, it's the multipoint
|
|
destination IPv6 address. When the VC connection type is other
|
|
than p2mp OR when the multipoint destination address type is of
|
|
IPv4, this object returns all the bytes of addr filled with 0."
|
|
::= { jnxAtmVCEntry 4 }
|
|
|
|
jnxAtmVCFlags OBJECT-TYPE
|
|
SYNTAX JnxAtmFlags
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Flags related to the VC."
|
|
::= { jnxAtmVCEntry 5 }
|
|
|
|
jnxAtmVCTotalDownTime OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total VC down time in seconds ever since the system rebooted."
|
|
::= { jnxAtmVCEntry 6 }
|
|
|
|
-- Traffic Stats
|
|
jnxAtmVCInBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of bytes received on the VC."
|
|
::= { jnxAtmVCEntry 7 }
|
|
|
|
jnxAtmVCOutBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of bytes sent out on the VC."
|
|
::= { jnxAtmVCEntry 8 }
|
|
|
|
jnxAtmVCInPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packets received on the VC."
|
|
::= { jnxAtmVCEntry 9 }
|
|
|
|
jnxAtmVCOutPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packets sent out on the VC."
|
|
::= { jnxAtmVCEntry 10 }
|
|
|
|
jnxAtmVCTailQueuePktDrops OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packets dropped due to bandwidth constraints.
|
|
Indicates that packets were queued to send out at a rate faster
|
|
than allowed."
|
|
::= { jnxAtmVCEntry 11 }
|
|
|
|
-- OAM Config
|
|
jnxAtmVCOAMPeriod OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This time interval indicates how often the F5 cells are sent to
|
|
know the status of the VC."
|
|
::= { jnxAtmVCEntry 12 }
|
|
|
|
jnxAtmVCOAMUpCellCount OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum number of loopback cells to be received to declare
|
|
that the VC is up."
|
|
::= { jnxAtmVCEntry 13 }
|
|
|
|
jnxAtmVCOAMDownCellCount OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum number of loopback cells to be received to declare
|
|
that the VC is down. This object would have zero value if OAM is
|
|
not enabled. (indicated in jnxAtmVCFlags)"
|
|
::= { jnxAtmVCEntry 14 }
|
|
|
|
-- OAM F5 Stats
|
|
jnxAtmVCInOAMF5LoopCells OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of OAM F5 loopback cells received. This object would
|
|
have zero value if OAM (as indicated in jnxAtmVCFlags) is not
|
|
enabled."
|
|
::= { jnxAtmVCEntry 15 }
|
|
|
|
jnxAtmVCOutOAMF5LoopCells OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of OAM F5 loopback cells sent. This object would have
|
|
zero value if OAM (as indicated in jnxAtmVCFlags) is not
|
|
enabled."
|
|
::= { jnxAtmVCEntry 16 }
|
|
|
|
jnxAtmVCInOAMF5RDICells OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of OAM F5 cells received, with RDI(Remote Defect
|
|
Indication) bit set. This object would have zero value if OAM
|
|
(as indicated in jnxAtmVCFlags) is not enabled."
|
|
::= { jnxAtmVCEntry 17 }
|
|
|
|
jnxAtmVCOutOAMF5RDICells OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of OAM F5 cells transmitted, with RDI(Remote Defect
|
|
Indication) bit set. This object would have zero value if OAM
|
|
(as indicated in jnxAtmVCFlags) is not enabled."
|
|
::= { jnxAtmVCEntry 18 }
|
|
|
|
jnxAtmVCInOAMF5AISCells OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of OAM F5 cells received, with AIS(Alarm Indication
|
|
Signal) bit set. This object would have zero value if OAM (as
|
|
indicated in jnxAtmVCFlags) is not enabled."
|
|
::= { jnxAtmVCEntry 19 }
|
|
|
|
jnxAtmVCOutOAMF5AISCells OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of OAM F5 cells transmitted, with AIS (Alarm
|
|
Indication Signal) bit set. This object would have zero
|
|
value if OAM (as indicated in jnxAtmVCFlags) is not
|
|
enabled."
|
|
::= { jnxAtmVCEntry 20 }
|
|
|
|
--
|
|
-- Juniper ATM VP (Virtual Path) table
|
|
--
|
|
-- This table augments the atmVplTable defined in ATM-MIB.
|
|
--
|
|
jnxAtmVpTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JnxAtmVpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of ATM VPs. This table augments atmVplTable
|
|
defined in standard ATM mib."
|
|
|
|
|
|
::= { jnxAtm 3 }
|
|
|
|
jnxAtmVpEntry OBJECT-TYPE
|
|
SYNTAX JnxAtmVpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry represents config, status and statistics info related
|
|
to an ATM VP configured. This entry augments the atmVplEntry
|
|
defined in standard ATM mib (RFC 2515). So ifIndex and VPI are the
|
|
indices to this table.
|
|
|
|
Caveats:
|
|
- Traffic stats are available per VP tunnel, only if shaping is
|
|
configured on the VP. Object 'jnxAtmVpFlags' can be used to
|
|
determine if shaping is enabled.
|
|
|
|
- When no OAM is configured, OAM config and OAM stat objects'
|
|
values are invalid (zero by default). Object 'jnxAtmVpFlags'
|
|
contains info on whether OAM is configured or not.
|
|
|
|
- For atm-1 VPs, the only valid object is jnxAtmVpFlags."
|
|
AUGMENTS { atmVplEntry }
|
|
::= { jnxAtmVpTable 1 }
|
|
|
|
JnxAtmVpEntry ::=
|
|
SEQUENCE {
|
|
-- VP Generic Info
|
|
jnxAtmVpFlags BITS,
|
|
jnxAtmVpTotalDownTime Integer32,
|
|
|
|
-- VP OAM config
|
|
jnxAtmVpOamPeriod Integer32,
|
|
jnxAtmVpOamUpCellCount Integer32,
|
|
jnxAtmVpOamDownCellCount Integer32,
|
|
|
|
-- VP Traffic Stats
|
|
jnxAtmVpInBytes Counter64,
|
|
jnxAtmVpOutBytes Counter64,
|
|
jnxAtmVpInPkts Counter64,
|
|
jnxAtmVpOutPkts Counter64,
|
|
|
|
-- VP OAM F4 Cell Stats
|
|
jnxAtmVpInOamF4Cells Counter32,
|
|
jnxAtmVpOutOamF4Cells Counter32,
|
|
jnxAtmVpInOamF4LoopCells Counter32,
|
|
jnxAtmVpOutOamF4LoopCells Counter32,
|
|
jnxAtmVpInOamF4RdiCells Counter32,
|
|
jnxAtmVpOutOamF4RdiCells Counter32,
|
|
jnxAtmVpInOamF4AisCells Counter32
|
|
}
|
|
|
|
-- VP Generic Info
|
|
jnxAtmVpFlags OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
active(0),
|
|
down(1),
|
|
oamEnabled(2),
|
|
shapingEnabled(3),
|
|
passiveOam(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The flags associated with this VP."
|
|
::= { jnxAtmVpEntry 1 }
|
|
|
|
jnxAtmVpTotalDownTime OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total VP downtime in seconds, ever since the system rebooted."
|
|
::= { jnxAtmVpEntry 2 }
|
|
|
|
|
|
-- VP OAM config
|
|
jnxAtmVpOamPeriod OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This time interval indicates how often the OAM F4 cells are sent
|
|
to determine the status of the VP. The value of this object is zero
|
|
when OAM is not enabled on the VP. Object 'jnxAtmVpFlags' can be used
|
|
to determine if OAM is enabled."
|
|
::= { jnxAtmVpEntry 3 }
|
|
|
|
jnxAtmVpOamUpCellCount OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum number of consecutive loopback cells to be received to
|
|
declare that the VP is up. The value of this object is zero when
|
|
OAM is not enabled on the VP. Object 'jnxAtmVpFlags' can be used to
|
|
determine if OAM is enabled."
|
|
::= { jnxAtmVpEntry 4 }
|
|
|
|
jnxAtmVpOamDownCellCount OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum number of consecutive loopback cells to be received to
|
|
declare that the VP is down. The value of this object is zero when
|
|
OAM is not enabled on the VP. Object 'jnxAtmVpFlags' can be used to
|
|
determine if OAM is enabled."
|
|
::= { jnxAtmVpEntry 5 }
|
|
|
|
-- VP Traffic stats
|
|
jnxAtmVpInBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of bytes received on the VP."
|
|
::= { jnxAtmVpEntry 6 }
|
|
|
|
jnxAtmVpOutBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of bytes sent out on the VP."
|
|
::= { jnxAtmVpEntry 7 }
|
|
|
|
jnxAtmVpInPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packets received on the VP."
|
|
::= { jnxAtmVpEntry 8 }
|
|
|
|
jnxAtmVpOutPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packets sent out on the VP."
|
|
::= { jnxAtmVpEntry 9 }
|
|
|
|
-- VP OAM F4 stats
|
|
jnxAtmVpInOamF4Cells OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of OAM F4 cells received on the VP."
|
|
::= { jnxAtmVpEntry 10 }
|
|
|
|
jnxAtmVpOutOamF4Cells OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of OAM F4 cells transmitted on the VP."
|
|
::= { jnxAtmVpEntry 11 }
|
|
|
|
jnxAtmVpInOamF4LoopCells OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of OAM F4 loopback cells received on the VP."
|
|
::= { jnxAtmVpEntry 12 }
|
|
|
|
jnxAtmVpOutOamF4LoopCells OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of OAM F4 cells transmitted on the VP."
|
|
::= { jnxAtmVpEntry 13 }
|
|
|
|
jnxAtmVpInOamF4RdiCells OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of OAM F4 RDI cells received on the VP."
|
|
::= { jnxAtmVpEntry 14 }
|
|
|
|
jnxAtmVpOutOamF4RdiCells OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of OAM F4 RDI cells transmitted on the VP."
|
|
::= { jnxAtmVpEntry 15 }
|
|
|
|
jnxAtmVpInOamF4AisCells OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of OAM F4 AIS cells received on the VP."
|
|
::= { jnxAtmVpEntry 16 }
|
|
|
|
|
|
--
|
|
-- Juniper ATM Trunk Table
|
|
--
|
|
jnxAtmTrunkTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JnxAtmTrunkEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of all ATM Trunk entries."
|
|
|
|
|
|
::= { jnxAtm 4 }
|
|
|
|
jnxAtmTrunkEntry OBJECT-TYPE
|
|
SYNTAX JnxAtmTrunkEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Special Cases:
|
|
- When the encapsulation type for the logical interface
|
|
(to which Trunk belongs) is 'atmCccCellRelay', only
|
|
Generic Trunk Info is valid."
|
|
INDEX { ifIndex }
|
|
|
|
::= { jnxAtmTrunkTable 1 }
|
|
|
|
JnxAtmTrunkEntry ::=
|
|
SEQUENCE {
|
|
jnxAtmTrunkId Integer32,
|
|
|
|
-- Generic Trunk Info
|
|
jnxAtmTrunkConnType INTEGER,
|
|
jnxAtmTrunkEncapsulation INTEGER,
|
|
jnxAtmTrunkFlags JnxAtmFlags,
|
|
jnxAtmTrunkTotalDownTime Integer32,
|
|
|
|
-- Traffic stats
|
|
jnxAtmTrunkInBytes Counter64,
|
|
jnxAtmTrunkOutBytes Counter64,
|
|
jnxAtmTrunkInPkts Counter64,
|
|
jnxAtmTrunkOutPkts Counter64,
|
|
jnxAtmTrunkTailQueuePktDrops Counter64,
|
|
|
|
-- OAM F4 Cell Stats
|
|
jnxAtmTrunkInOAMF4AISCells Counter32,
|
|
jnxAtmTrunkOutOAMF4AISCells Counter32
|
|
}
|
|
|
|
jnxAtmTrunkId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The identifier for this ATM Trunk."
|
|
::= { jnxAtmTrunkEntry 1 }
|
|
|
|
jnxAtmTrunkConnType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
p2p(2) -- point-to-point
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of connection. The type 'other' means trunk type is
|
|
unknown or is not one of the other types."
|
|
::= { jnxAtmTrunkEntry 2 }
|
|
|
|
jnxAtmTrunkEncapsulation OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
atmCccCellRelay(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The atm encapsulation type associated with the VC or Trunk.
|
|
atmCccCellRelay : ATM Cell Relay for CCC"
|
|
::= { jnxAtmTrunkEntry 3 }
|
|
|
|
jnxAtmTrunkFlags OBJECT-TYPE
|
|
SYNTAX JnxAtmFlags
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Flags related to the Trunk."
|
|
::= { jnxAtmTrunkEntry 4 }
|
|
|
|
jnxAtmTrunkTotalDownTime OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total Trunk down time in seconds ever since the system rebooted."
|
|
::= { jnxAtmTrunkEntry 5 }
|
|
|
|
-- Traffic Stats
|
|
jnxAtmTrunkInBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of bytes received on the Trunk."
|
|
::= { jnxAtmTrunkEntry 6 }
|
|
|
|
jnxAtmTrunkOutBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of bytes sent out on the Trunk."
|
|
::= { jnxAtmTrunkEntry 7 }
|
|
|
|
jnxAtmTrunkInPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packets received on the Trunk."
|
|
::= { jnxAtmTrunkEntry 8 }
|
|
|
|
jnxAtmTrunkOutPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packets sent out on the Trunk."
|
|
::= { jnxAtmTrunkEntry 9 }
|
|
|
|
jnxAtmTrunkTailQueuePktDrops OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packets dropped due to bandwidth constraints.
|
|
Indicates that packets were queued to send out at a rate faster
|
|
than allowed."
|
|
::= { jnxAtmTrunkEntry 10 }
|
|
|
|
-- OAM F4 Stats
|
|
|
|
jnxAtmTrunkInOAMF4AISCells OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of OAM F4 cells received, with AIS(Alarm Indication
|
|
Signal) bit set."
|
|
::= { jnxAtmTrunkEntry 15 }
|
|
|
|
jnxAtmTrunkOutOAMF4AISCells OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of OAM F4 cells sent, with AIS(Alarm Indication
|
|
Signal) bit set."
|
|
::= { jnxAtmTrunkEntry 16 }
|
|
|
|
END
|