mibs/MIBS/junos/JUNIPER-DCU-MIB
2023-12-05 12:25:34 +01:00

211 lines
6.3 KiB
Plaintext

--
-- Juniper Enterprise Specific MIB: Destination Class Usage MIB
--
-- Copyright (c) 2000-2003, Juniper Networks, Inc.
-- All rights reserved.
--
-- The contents of this document are subject to change without notice.
--
JUNIPER-DCU-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Counter64
FROM SNMPv2-SMI
DisplayString
FROM SNMPv2-TC
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB -- RFC 2571
InterfaceIndex
FROM IF-MIB
jnxMibs
FROM JUNIPER-SMI;
jnxDCUs MODULE-IDENTITY
LAST-UPDATED "200307182153Z" -- Fri Jul 18 21:53:48 2003 UTC
ORGANIZATION "Juniper Networks, Inc."
CONTACT-INFO
" Juniper Technical Assistance Center
Juniper Networks, Inc.
1133 Innovation Way
Sunnyvale, CA 94089
E-mail: support@juniper.net"
DESCRIPTION
"This is Juniper Networks' implementation of enterprise
specific MIB for Destination Class Usage (DCU)"
REVISION "200212170000Z" -- 17 December, 2002
DESCRIPTION
"Deprecated jnxDCUsTable. Use jnxDcuStatsTable instead."
REVISION "200202280000Z" -- 28 February, 2002
DESCRIPTION
"Added jnxDcuStatsTable to expose per-address family stats.
The current jnxDCUsTable will only apply to ipv4 stats."
::= { jnxMibs 6 }
jnxDCUsTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxDCUsEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"A list of DCUs entries."
::= { jnxDCUs 1 }
jnxDCUsEntry OBJECT-TYPE
SYNTAX JnxDCUsEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"An entry of DCUs table."
INDEX { jnxDCUSrcIfIndex,
jnxDCUDstClassName }
::= { jnxDCUsTable 1 }
JnxDCUsEntry ::=
SEQUENCE {
jnxDCUSrcIfIndex InterfaceIndex,
jnxDCUDstClassName DisplayString,
jnxDCUPackets Counter64,
jnxDCUBytes Counter64
}
jnxDCUSrcIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The source interface index. This is the ifIndex
that the traffic is coming from and the statistics
is counted for the specified DCU entry."
::= { jnxDCUsEntry 1 }
jnxDCUDstClassName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..24))
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The name of the destination class. This is the name
of a valid configuration group defining a set of IP
addresses and/or prefixes."
::= { jnxDCUsEntry 2 }
jnxDCUPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of packets being counted pertaining to
the specified DCU entry."
::= { jnxDCUsEntry 3 }
jnxDCUBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of bytes being counted pertaining to
the specified DCU entry."
::= { jnxDCUsEntry 4 }
jnxDcuStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxDcuStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains statistics for traffic that satisfies
the rules in each configured Destination Class. A separate
set of statistics are kept for each Destination Class on
each interface and address family on which this feature is
enabled."
::= { jnxDCUs 2 }
jnxDcuStatsEntry OBJECT-TYPE
SYNTAX JnxDcuStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table contains a set of statistics for
all traffic received on a specific interface and belonging
to a specific address family that matches a specific
Destination Class."
INDEX { jnxDcuStatsSrcIfIndex, jnxDcuStatsAddrFamily,
jnxDcuStatsClassName }
::= { jnxDcuStatsTable 1 }
JnxDcuStatsEntry ::=
SEQUENCE {
jnxDcuStatsSrcIfIndex InterfaceIndex,
jnxDcuStatsAddrFamily INTEGER,
jnxDcuStatsClassName SnmpAdminString,
jnxDcuStatsPackets Counter64,
jnxDcuStatsBytes Counter64,
jnxDcuStatsClName SnmpAdminString
}
jnxDcuStatsSrcIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifIndex of the ingress interface for traffic counted in
this entry."
::= { jnxDcuStatsEntry 1 }
jnxDcuStatsAddrFamily OBJECT-TYPE
SYNTAX INTEGER {
ipv4 (1),
ipv6 (2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The address family of this entry's traffic."
::= { jnxDcuStatsEntry 2 }
jnxDcuStatsClassName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..112))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The name of the destination class."
::= { jnxDcuStatsEntry 3 }
jnxDcuStatsPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets received on this interface, belonging
to this address family that match this Destination Class."
::= { jnxDcuStatsEntry 4 }
jnxDcuStatsBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of bytes received on this interface, belonging
to this address family that match this Destination Class."
::= { jnxDcuStatsEntry 5 }
jnxDcuStatsClName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..112))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the destination class. This object is a duplicate
of jnxDcuStatsClassName and is included to satisfy those
NM applications that can't extract the name from the instance
portion of the OID."
::= { jnxDcuStatsEntry 6 }
END