667 lines
22 KiB
Plaintext
667 lines
22 KiB
Plaintext
--
|
|
-- Juniper Enterprise Specific MIB: SFF Digital Optical Monitor MIB
|
|
--
|
|
-- Copyright (c) 2010, Juniper Networks, Inc.
|
|
-- All rights reserved.
|
|
--
|
|
-- The contents of this document are subject to change without notice.
|
|
--
|
|
|
|
JUNIPER-DOM-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, Integer32, NOTIFICATION-TYPE
|
|
FROM SNMPv2-SMI
|
|
DateAndTime, TEXTUAL-CONVENTION
|
|
FROM SNMPv2-TC
|
|
jnxDomMibRoot, jnxDomNotifications, jnxDomLaneNotifications
|
|
FROM JUNIPER-SMI
|
|
ifIndex, ifDescr
|
|
FROM IF-MIB;
|
|
|
|
-- DOM Alarm and Warning Type
|
|
|
|
jnxDomMib MODULE-IDENTITY
|
|
LAST-UPDATED "201403200000Z" -- Thu Mar 03 2009 UTC
|
|
ORGANIZATION "Juniper Networks, Inc."
|
|
CONTACT-INFO
|
|
" Juniper Technical Assistance Center
|
|
Juniper Networks, Inc.
|
|
1133 Innovation Way
|
|
Sunnyvale, CA 94089
|
|
E-mail: support@juniper.net"
|
|
|
|
DESCRIPTION
|
|
"This MIB module defines objects used for Digital Optical
|
|
Monitor on interface of Juniper products."
|
|
REVISION "201403200000Z"
|
|
DESCRIPTION
|
|
"Change XFP references to generic SFF in descriptions. Add
|
|
DOM lane table."
|
|
REVISION "200912230000Z"
|
|
DESCRIPTION
|
|
"Initial revision."
|
|
::= { jnxDomMibRoot 1 }
|
|
|
|
JnxDomAlarmId ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Identifies specific DOM alarms that may exist on an
|
|
interface."
|
|
SYNTAX BITS {
|
|
domRxLossSignalAlarm(0), -- Input Loss of signal
|
|
domRxCDRLossLockAlarm(1), -- Input Loss of Lock
|
|
domRxNotReadyAlarm(2), -- Input rx path
|
|
domRxLaserPowerHighAlarm(3), -- Input laser power
|
|
domRxLaserPowerLowAlarm(4), -- Input laser power
|
|
domTxLaserBiasCurrentHighAlarm(5), -- Output laser bias current
|
|
domTxLaserBiasCurrentLowAlarm(6), -- Output laser bias current
|
|
domTxLaserOutputPowerHighAlarm(7), -- Output laser power
|
|
domTxLaserOutputPowerLowAlarm(8), -- Output laser power
|
|
domTxDataNotReadyAlarm(9), -- Output A/D data not ready
|
|
domTxNotReadyAlarm(10), -- Output tx path
|
|
domTxLaserFaultAlarm(11), -- Output laser safety
|
|
domTxCDRLossLockAlarm(12), -- Output CDR
|
|
domModuleTemperatureHighAlarm(13), -- Module temperature
|
|
domModuleTemperatureLowAlarm(14), -- Module temperature
|
|
domModuleNotReadyAlarm(15), -- Module MOD_NR
|
|
domModulePowerDownAlarm(16), -- Module P_DOWN
|
|
domLinkDownAlarm(17), -- Wire Unplugged or Down
|
|
domModuleRemovedAlarm(18), -- Module Unplugged or Down
|
|
domModuleVoltageHighAlarm(19), -- Module Voltage High
|
|
domModuleVoltageLowAlarm(20) -- Module Voltage Low
|
|
}
|
|
|
|
JnxDomWarningId ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Identifies specific DOM warnings that may exist on an
|
|
interface."
|
|
SYNTAX BITS {
|
|
domRxLaserPowerHighWarning(0), -- Input laser power
|
|
domRxLaserPowerLowWarning(1), -- Input laser power
|
|
domTxLaserBiasCurrentHighWarning(2), -- Output laser bias current
|
|
domTxLaserBiasCurrentLowWarning(3), -- Output laser bias current
|
|
domTxLaserOutputPowerHighWarning(4), -- Output laser power
|
|
domTxLaserOutputPowerLowWarning(5), -- Output laser power
|
|
domModuleTemperatureHighWarning(6), -- Module temperature
|
|
domModuleTemperatureLowWarning(7), -- Module temperature
|
|
domModuleVoltageHighWarning(8), -- Module voltage
|
|
domModuleVoltageLowWarning(9) -- Module voltage
|
|
}
|
|
|
|
JnxDomLaneAlarmId ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Identifies specific DOM alarms that may exist on
|
|
a Lane of a SFF interface"
|
|
SYNTAX BITS {
|
|
domLaneRxLaserPowerHighAlarm(0),
|
|
domLaneRxLaserPowerLowAlarm(1),
|
|
domLaneTxLaserBiasCurrentHighAlarm(2),
|
|
domLaneTxLaserBiasCurrentLowAlarm(3),
|
|
domLaneTxLaserOutputPowerHighAlarm(4),
|
|
domLaneTxLaserOutputPowerLowAlarm(5),
|
|
domLaneLaserTemperatureHighAlarm(6),
|
|
domLaneLaserTemperatureLowAlarm(7)
|
|
}
|
|
|
|
JnxDomLaneWarningId ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Identifies specific DOM warnings that may exist on
|
|
a Lane of a SFF interface"
|
|
SYNTAX BITS {
|
|
domLaneRxLaserPowerHighWarning(0),
|
|
domLaneRxLaserPowerLowWarning(1),
|
|
domLaneTxLaserBiasCurrentHighWarning(2),
|
|
domLaneTxLaserBiasCurrentLowWarning(3),
|
|
domLaneTxLaserOutputPowerHighWarning(4),
|
|
domLaneTxLaserOutputPowerLowWarning(5),
|
|
domLaneLaserTemperatureHighWarning(6),
|
|
domLaneLaserTemperatureLowWarning(7)
|
|
}
|
|
|
|
--
|
|
-- Current DOM Statistics
|
|
--
|
|
|
|
jnxDomDigitalMonitoring OBJECT IDENTIFIER ::= { jnxDomMib 1 }
|
|
|
|
jnxDomCurrentTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JnxDomCurrentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about Digital Optical Monitoring for this
|
|
interfaces on this router."
|
|
::= { jnxDomDigitalMonitoring 1 }
|
|
|
|
jnxDomCurrentEntry OBJECT-TYPE
|
|
SYNTAX JnxDomCurrentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about Digital Optical Monitoring
|
|
for this interfaces on this router."
|
|
INDEX { ifIndex }
|
|
::= { jnxDomCurrentTable 1 }
|
|
|
|
JnxDomCurrentEntry ::=
|
|
SEQUENCE {
|
|
jnxDomCurrentAlarms
|
|
JnxDomAlarmId,
|
|
jnxDomCurrentAlarmDate
|
|
DateAndTime,
|
|
jnxDomLastAlarms
|
|
JnxDomAlarmId,
|
|
jnxDomCurrentWarnings
|
|
JnxDomWarningId,
|
|
jnxDomCurrentRxLaserPower
|
|
Integer32,
|
|
jnxDomCurrentTxLaserBiasCurrent
|
|
Integer32,
|
|
jnxDomCurrentTxLaserOutputPower
|
|
Integer32,
|
|
jnxDomCurrentModuleTemperature
|
|
Integer32,
|
|
jnxDomCurrentRxLaserPowerHighAlarmThreshold
|
|
Integer32,
|
|
jnxDomCurrentRxLaserPowerLowAlarmThreshold
|
|
Integer32,
|
|
jnxDomCurrentRxLaserPowerHighWarningThreshold
|
|
Integer32,
|
|
jnxDomCurrentRxLaserPowerLowWarningThreshold
|
|
Integer32,
|
|
jnxDomCurrentTxLaserBiasCurrentHighAlarmThreshold
|
|
Integer32,
|
|
jnxDomCurrentTxLaserBiasCurrentLowAlarmThreshold
|
|
Integer32,
|
|
jnxDomCurrentTxLaserBiasCurrentHighWarningThreshold
|
|
Integer32,
|
|
jnxDomCurrentTxLaserBiasCurrentLowWarningThreshold
|
|
Integer32,
|
|
jnxDomCurrentTxLaserOutputPowerHighAlarmThreshold
|
|
Integer32,
|
|
jnxDomCurrentTxLaserOutputPowerLowAlarmThreshold
|
|
Integer32,
|
|
jnxDomCurrentTxLaserOutputPowerHighWarningThreshold
|
|
Integer32,
|
|
jnxDomCurrentTxLaserOutputPowerLowWarningThreshold
|
|
Integer32,
|
|
jnxDomCurrentModuleTemperatureHighAlarmThreshold
|
|
Integer32,
|
|
jnxDomCurrentModuleTemperatureLowAlarmThreshold
|
|
Integer32,
|
|
jnxDomCurrentModuleTemperatureHighWarningThreshold
|
|
Integer32,
|
|
jnxDomCurrentModuleTemperatureLowWarningThreshold
|
|
Integer32,
|
|
jnxDomCurrentModuleVoltage
|
|
Integer32,
|
|
jnxDomCurrentModuleVoltageHighAlarmThreshold
|
|
Integer32,
|
|
jnxDomCurrentModuleVoltageLowAlarmThreshold
|
|
Integer32,
|
|
jnxDomCurrentModuleVoltageHighWarningThreshold
|
|
Integer32,
|
|
jnxDomCurrentModuleVoltageLowWarningThreshold
|
|
Integer32,
|
|
jnxDomCurrentModuleLaneCount
|
|
Integer32
|
|
}
|
|
|
|
jnxDomCurrentAlarms OBJECT-TYPE
|
|
SYNTAX JnxDomAlarmId
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies all the active DOM alarms
|
|
on a SFF physical interface on this router."
|
|
::= { jnxDomCurrentEntry 1 }
|
|
|
|
jnxDomCurrentAlarmDate OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The system date and time when the management subsystem learned
|
|
of the current alarm event."
|
|
::= { jnxDomCurrentEntry 2 }
|
|
|
|
jnxDomLastAlarms OBJECT-TYPE
|
|
SYNTAX JnxDomAlarmId
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a copy of jnxDomCurrentAlarms
|
|
before last set or clear."
|
|
::= { jnxDomCurrentEntry 3 }
|
|
|
|
jnxDomCurrentWarnings OBJECT-TYPE
|
|
SYNTAX JnxDomWarningId
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies all the active DOM warnings
|
|
on a SFF physical interface on this router."
|
|
::= { jnxDomCurrentEntry 4 }
|
|
|
|
jnxDomCurrentRxLaserPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.01 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Receiver laser power."
|
|
::= { jnxDomCurrentEntry 5 }
|
|
|
|
jnxDomCurrentTxLaserBiasCurrent OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.001 mA"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Transmitter laser bias current."
|
|
::= { jnxDomCurrentEntry 6 }
|
|
|
|
|
|
jnxDomCurrentTxLaserOutputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.01 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Transmitter laser output power."
|
|
::= { jnxDomCurrentEntry 7 }
|
|
|
|
jnxDomCurrentModuleTemperature OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "Celsius (degrees C)"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Module temperature."
|
|
::= { jnxDomCurrentEntry 8 }
|
|
|
|
jnxDomCurrentRxLaserPowerHighAlarmThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.01 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Receiver laser power high alarm threshold."
|
|
::= { jnxDomCurrentEntry 9 }
|
|
|
|
jnxDomCurrentRxLaserPowerLowAlarmThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.01 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Receiver laser power low alarm threshold."
|
|
::= { jnxDomCurrentEntry 10 }
|
|
|
|
jnxDomCurrentRxLaserPowerHighWarningThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.01 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Receiver laser power high warning threshold."
|
|
::= { jnxDomCurrentEntry 11 }
|
|
|
|
jnxDomCurrentRxLaserPowerLowWarningThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.01 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Receiver laser power low warning threshold."
|
|
::= { jnxDomCurrentEntry 12 }
|
|
|
|
jnxDomCurrentTxLaserBiasCurrentHighAlarmThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.001 mA"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Transmitter laser bias current high alarm threshold."
|
|
::= { jnxDomCurrentEntry 13 }
|
|
|
|
jnxDomCurrentTxLaserBiasCurrentLowAlarmThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.001 mA"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Transmitter laser bias current low alarm threshold."
|
|
::= { jnxDomCurrentEntry 14 }
|
|
|
|
jnxDomCurrentTxLaserBiasCurrentHighWarningThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.001 mA"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Transmitter laser bias current high warning threshold."
|
|
::= { jnxDomCurrentEntry 15 }
|
|
|
|
jnxDomCurrentTxLaserBiasCurrentLowWarningThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.001 mA"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Transmitter laser bias current low warning threshold."
|
|
::= { jnxDomCurrentEntry 16 }
|
|
|
|
jnxDomCurrentTxLaserOutputPowerHighAlarmThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.01 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Transmitter laser power high alarm threshold."
|
|
::= { jnxDomCurrentEntry 17 }
|
|
|
|
jnxDomCurrentTxLaserOutputPowerLowAlarmThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.01 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Transmitter laser power low alarm threshold."
|
|
::= { jnxDomCurrentEntry 18 }
|
|
|
|
jnxDomCurrentTxLaserOutputPowerHighWarningThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.01 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Transmitter laser power high warning threshold."
|
|
::= { jnxDomCurrentEntry 19 }
|
|
|
|
jnxDomCurrentTxLaserOutputPowerLowWarningThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.01 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Transmitter laser power low warning threshold."
|
|
::= { jnxDomCurrentEntry 20 }
|
|
|
|
jnxDomCurrentModuleTemperatureHighAlarmThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "Celsius (degrees C)"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Module temperature high alarm threshold."
|
|
::= { jnxDomCurrentEntry 21 }
|
|
|
|
jnxDomCurrentModuleTemperatureLowAlarmThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "Celsius (degrees C)"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Module temperature low alarm threshold."
|
|
::= { jnxDomCurrentEntry 22 }
|
|
|
|
jnxDomCurrentModuleTemperatureHighWarningThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "Celsius (degrees C)"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Module temperature high warning threshold."
|
|
::= { jnxDomCurrentEntry 23 }
|
|
|
|
jnxDomCurrentModuleTemperatureLowWarningThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "Celsius (degrees C)"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Module temperature low warning threshold."
|
|
::= { jnxDomCurrentEntry 24 }
|
|
|
|
jnxDomCurrentModuleVoltage OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.001 V"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Module voltage."
|
|
::= { jnxDomCurrentEntry 25 }
|
|
|
|
jnxDomCurrentModuleVoltageHighAlarmThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.001 V"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Module voltage high alarm threshold."
|
|
::= { jnxDomCurrentEntry 26 }
|
|
|
|
jnxDomCurrentModuleVoltageLowAlarmThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.001 V"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Module voltage low alarm threshold."
|
|
::= { jnxDomCurrentEntry 27 }
|
|
|
|
jnxDomCurrentModuleVoltageHighWarningThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.001 V"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Module voltage high warning threshold."
|
|
::= { jnxDomCurrentEntry 28 }
|
|
|
|
jnxDomCurrentModuleVoltageLowWarningThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.001 V"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Module voltage low warning threshold."
|
|
::= { jnxDomCurrentEntry 29 }
|
|
|
|
jnxDomCurrentModuleLaneCount OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Number of Lanes (Lasers) in this module"
|
|
::= { jnxDomCurrentEntry 30 }
|
|
|
|
--
|
|
-- Current DOM Lane Statistics
|
|
--
|
|
|
|
jnxDomDigitalLaneMonitoring OBJECT IDENTIFIER ::= { jnxDomMib 2 }
|
|
|
|
jnxDomModuleLaneTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JnxDomCurrentLaneEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table of information for this lane (Laser) of this
|
|
SFF optical module."
|
|
::= { jnxDomDigitalLaneMonitoring 1 }
|
|
|
|
jnxDomCurrentLaneEntry OBJECT-TYPE
|
|
SYNTAX JnxDomCurrentLaneEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about Digital Optical Monitoring for this
|
|
lane of this SFF optical Module"
|
|
INDEX { ifIndex, jnxDomLaneIndex }
|
|
::= { jnxDomModuleLaneTable 1 }
|
|
|
|
JnxDomCurrentLaneEntry ::=
|
|
SEQUENCE {
|
|
jnxDomLaneIndex
|
|
Integer32,
|
|
jnxDomCurrentLaneAlarms
|
|
JnxDomLaneAlarmId,
|
|
jnxDomCurrentLaneAlarmDate
|
|
DateAndTime,
|
|
jnxDomLaneLastAlarms
|
|
JnxDomLaneAlarmId,
|
|
jnxDomCurrentLaneWarnings
|
|
JnxDomLaneWarningId,
|
|
jnxDomCurrentLaneRxLaserPower
|
|
Integer32,
|
|
jnxDomCurrentLaneTxLaserBiasCurrent
|
|
Integer32,
|
|
jnxDomCurrentLaneTxLaserOutputPower
|
|
Integer32,
|
|
jnxDomCurrentLaneLaserTemperature
|
|
Integer32
|
|
}
|
|
|
|
jnxDomLaneIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0..1000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A lane (Laser) on this SFF optical interface"
|
|
::= {jnxDomCurrentLaneEntry 1}
|
|
|
|
jnxDomCurrentLaneAlarms OBJECT-TYPE
|
|
SYNTAX JnxDomLaneAlarmId
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies all the active DOM alarms
|
|
on a particular Lane of a SFF physical interface."
|
|
::= {jnxDomCurrentLaneEntry 2}
|
|
|
|
jnxDomCurrentLaneAlarmDate OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The system date and time when the management subsystem learned
|
|
of the current lane alarm event."
|
|
::= {jnxDomCurrentLaneEntry 3}
|
|
|
|
jnxDomLaneLastAlarms OBJECT-TYPE
|
|
SYNTAX JnxDomLaneAlarmId
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a copy of jnxDomCurrentAlarms
|
|
before last set or clear."
|
|
::= {jnxDomCurrentLaneEntry 4}
|
|
|
|
jnxDomCurrentLaneWarnings OBJECT-TYPE
|
|
SYNTAX JnxDomLaneWarningId
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies all the active DOM warnings
|
|
on a particular Lane of a SFF physical interface."
|
|
::= {jnxDomCurrentLaneEntry 5}
|
|
|
|
jnxDomCurrentLaneRxLaserPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.01 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Receiver laser power on a particular Lane of a SFF
|
|
physcial interface."
|
|
::= {jnxDomCurrentLaneEntry 6}
|
|
|
|
jnxDomCurrentLaneTxLaserBiasCurrent OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.001 mA"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Transmitter laser bias on a particular Lane of a SFF
|
|
physcial interface."
|
|
::= {jnxDomCurrentLaneEntry 7}
|
|
|
|
jnxDomCurrentLaneTxLaserOutputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.01 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Transmitter laser power on a particular Lane of a SFF
|
|
physcial interface."
|
|
::= {jnxDomCurrentLaneEntry 8}
|
|
|
|
jnxDomCurrentLaneLaserTemperature OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "Celsius (degrees C)"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Temperature of laser on a particular Lane of a SFF
|
|
physcial interface."
|
|
::= {jnxDomCurrentLaneEntry 9}
|
|
|
|
--
|
|
-- Configuration Management Notifications
|
|
--
|
|
|
|
jnxDomNotificationPrefix OBJECT IDENTIFIER ::= { jnxDomNotifications 0 }
|
|
|
|
jnxDomAlarmSet NOTIFICATION-TYPE
|
|
OBJECTS { ifDescr,
|
|
jnxDomLastAlarms,
|
|
jnxDomCurrentAlarms,
|
|
jnxDomCurrentAlarmDate }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Notification of a recently set Dom alarm."
|
|
::= { jnxDomNotificationPrefix 1 }
|
|
|
|
jnxDomAlarmCleared NOTIFICATION-TYPE
|
|
OBJECTS { ifDescr,
|
|
jnxDomLastAlarms,
|
|
jnxDomCurrentAlarms,
|
|
jnxDomCurrentAlarmDate }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Notification of a recently cleared Dom alarm."
|
|
::= { jnxDomNotificationPrefix 2 }
|
|
|
|
jnxDomLaneNotificationPrefix OBJECT IDENTIFIER ::= { jnxDomLaneNotifications 0 }
|
|
|
|
jnxDomLaneAlarmSet NOTIFICATION-TYPE
|
|
OBJECTS { ifDescr,
|
|
jnxDomLaneIndex,
|
|
jnxDomLaneLastAlarms,
|
|
jnxDomCurrentLaneAlarms,
|
|
jnxDomCurrentLaneAlarmDate }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Notification of a recently set Dom Lane alarm."
|
|
::= { jnxDomLaneNotificationPrefix 1 }
|
|
|
|
jnxDomLaneAlarmCleared NOTIFICATION-TYPE
|
|
OBJECTS { ifDescr,
|
|
jnxDomLaneIndex,
|
|
jnxDomLaneLastAlarms,
|
|
jnxDomCurrentLaneAlarms,
|
|
jnxDomCurrentLaneAlarmDate }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Notification of a recently cleared Dom Lane alarm."
|
|
::= { jnxDomLaneNotificationPrefix 2 }
|
|
|
|
END
|
|
|