mibs/MIBS/junos/JUNIPER-L2ALD-MIB
2023-12-05 12:25:34 +01:00

574 lines
20 KiB
Plaintext

--
-- Juniper Enterprise Specific MIB: Structure of Management Information
--
-- Copyright (c) 2002-2013, Juniper Networks, Inc.
-- All rights reserved.
--
-- The contents of this document are subject to change without notice.
--
JUNIPER-L2ALD-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-IDENTITY, OBJECT-TYPE,
NOTIFICATION-TYPE, Unsigned32, Counter64, TimeTicks, Integer32
FROM SNMPv2-SMI
DisplayString, TruthValue
FROM SNMPv2-TC
ifIndex, ifDescr
FROM IF-MIB
jnxl2aldMibRoot
FROM JUNIPER-SMI
;
jnxl2aldMib MODULE-IDENTITY
LAST-UPDATED "201605310000Z" -- Tue May 31 00:00:00 2016 UTC
ORGANIZATION "Juniper Networks, Inc."
CONTACT-INFO
" Juniper Technical Assistance Center
Juniper Networks, Inc.
1133 Innovation Way
Sunnyvale, CA 94089
E-mail: support@juniper.net"
DESCRIPTION
"The MIB modules for L2ALD traps"
-- Revision history
REVISION "201501221000Z" -- Thursday January 22 10:00:00 2015 UTC
DESCRIPTION
"Added a new field jnxL2aldVlanFdbId to the table jnxL2aldVlanTable"
REVISION "201501141000Z" -- Wednesday January 14 10:00:00 2015 UTC
DESCRIPTION
"Added new table jnxL2aldVlanTable"
REVISION "201208081000Z" -- Wednesday August 08 10:00:00 2012 UTC
DESCRIPTION
"Added new notification jnxl2aldMacMoveThreshold"
REVISION "200702151000Z" -- Thursday February 15 10:00:00 2007 UTC
DESCRIPTION
"Initial Version"
REVISION "201605310000Z" -- 31-May-16
DESCRIPTION
"Corrected type"
::= { jnxl2aldMibRoot 1 }
jnxl2aldNotification OBJECT IDENTIFIER ::= { jnxl2aldMib 0 }
jnxl2aldObjects OBJECT IDENTIFIER ::= { jnxl2aldMib 1 }
jnxl2aldInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF Jnxl2aldEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"L2ALD objects for interface MAC limit."
::= { jnxl2aldObjects 1 }
jnxl2aldEntry OBJECT-TYPE
SYNTAX Jnxl2aldEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in l2aldInterfaceTable."
INDEX { ifIndex }
::= { jnxl2aldInterfaceTable 1 }
Jnxl2aldEntry ::=
SEQUENCE {
jnxl2aldIntfLogicalRouter DisplayString,
jnxl2aldIntfRoutingInst DisplayString,
jnxl2aldIntfBridgeDomain DisplayString,
jnxl2aldIntfMacLimit Unsigned32,
jnxl2aldIntfMacPinningIntf DisplayString,
jnxl2aldIntfDiscardIntf DisplayString
}
-- Entry definitions for the table above
jnxl2aldIntfLogicalRouter OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The logical router string for interface table."
::= { jnxl2aldEntry 1 }
jnxl2aldIntfRoutingInst OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The routing instance string for interface table."
::= { jnxl2aldEntry 2 }
jnxl2aldIntfBridgeDomain OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The bridge domain string for interface table."
::= { jnxl2aldEntry 3 }
jnxl2aldIntfMacLimit OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The MAC limit count for the interface table."
::= { jnxl2aldEntry 4 }
jnxl2aldIntfMacPinningIntf OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The interface on which MAC Pinning is enabled."
::= { jnxl2aldEntry 5 }
jnxl2aldIntfDiscardIntf OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The interface on which MAC is discarded due to MAC Pinning."
::= { jnxl2aldEntry 6 }
-- Objects defined below are scalar and for a different trap
-- they are different then the table definitions above
jnxl2aldRoutingInst OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The Routing instance string for routing mac limit trap."
::= { jnxl2aldObjects 2 }
jnxl2aldBridgeDomain OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The bridge domain string for routing mac limit trap."
::= { jnxl2aldObjects 3 }
jnxl2aldLogicalRouter OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The logical router string for routing mac limit trap."
::= { jnxl2aldObjects 4 }
jnxl2aldMacLimit OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The mac limit count for routing instance."
::= { jnxl2aldObjects 5 }
jnxl2aldGbMacLimit OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The mac limit count for the system."
::= { jnxl2aldObjects 6 }
jnxl2aldMacAdress OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The offending mac causing mac move threshold trap."
::= { jnxl2aldObjects 7 }
----------------------------------------------------------------------------
-- Juniper MAC Notification MIB object definitions
----------------------------------------------------------------------------
jnxL2aldMacNotificationMIBObjects OBJECT IDENTIFIER
::= {jnxl2aldMib 2 }
jnxL2aldMacNotificationMIBGlobalObjects OBJECT IDENTIFIER
::= {jnxL2aldMacNotificationMIBObjects 1 }
-- Juniper Mac Notification Global Group
jnxL2aldMacGlobalFeatureEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the MAC notification feature is currently
running in the device.
Setting this object to false(2) disables the MAC notification
feature globally.
Setting this object to true(1) will start the MAC notification
feature running in the device. If the feature is already
running, setting to true(1) has no effect."
::= { jnxL2aldMacNotificationMIBGlobalObjects 1 }
jnxL2aldMacNotificationInterval OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the maximum interval of time between
jnxL2aldMacChangedNotifications being generated by the device.
If the value of jnxNotificationsEnabled is true(1), the
device will send out the generated jnxL2aldMacChangedNotifications
and archive the MAC change notification events in the
jnxMacHistoryTable. If the value of jnxNotificationEnabled is
false(2), the device will not send out the generated
jnxL2aldMacChangedNotifications but it will archive these events
in the jnxMacHistoryTable.
If the value of this object is equal to 0, the device will
generate jnxL2aldMacChangedNotifications and archive the MAC
change notification events in the jnxMacHistoryTable as soon as
there is MAC address learnt or removed by the device.
If the value of this object is greater than 0, the device will
wait for a period of time equal to the value of this object
before generate the jnxL2aldMacChangedNotifications and archive
the MAC change notification events in the jnxMacHistoryTable."
DEFVAL { 30 }
::= { jnxL2aldMacNotificationMIBGlobalObjects 2 }
jnxL2aldMacAddressesLearnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of MAC addresses learnt by the
device."
::= { jnxL2aldMacNotificationMIBGlobalObjects 3 }
jnxL2aldMacAddressesRemoved OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of MAC addresses removed from the
forwarding database."
::= { jnxL2aldMacNotificationMIBGlobalObjects 4 }
jnxL2aldMacNotificationsEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether jnxL2aldMacChangedNotification notifications
will or will not be sent when there are MAC addresses
learnt or removed from the device's forwarding database.
Disabling notifications does not prevent the MAC address
info from being added to the jnxMacHistoryTable."
DEFVAL { false }
::= { jnxL2aldMacNotificationMIBGlobalObjects 5 }
jnxL2aldMacNotificationsSent OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of jnxl2aldMacChangedNotifications sent out
by the device."
::= { jnxL2aldMacNotificationMIBGlobalObjects 6 }
jnxL2aldMacHistTableMaxLength OBJECT-TYPE
SYNTAX Unsigned32 (0..500)
UNITS "entries"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upper limit on the number of entries that the
jnxMacHistoryTable may contain. A value of 0 will
prevent any history from being retained. When this
table is full, the oldest entry will be deleted and
a new one will be created."
DEFVAL { 256 }
::= { jnxL2aldMacNotificationMIBGlobalObjects 7 }
jnxL2aldMacHistoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxL2aldMacHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table will archive the MAC change notification events
generated by this device. The MAC change notification
events are archived here even if jnxMacChangesNotifications
are not actually sent."
::= { jnxL2aldMacNotificationMIBGlobalObjects 8 }
jnxL2aldMacHistoryEntry OBJECT-TYPE
SYNTAX JnxL2aldMacHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A MAC change notification message that was previously
generated by this device. Each entry is indexed by a message
index."
INDEX { jnxL2aldHistIndex }
::= { jnxL2aldMacHistoryTable 1 }
JnxL2aldMacHistoryEntry ::=
SEQUENCE {
jnxL2aldHistIndex
Unsigned32,
jnxL2aldHistMacChangedMsg
OCTET STRING,
jnxL2aldHistTimestamp
TimeTicks
}
jnxL2aldHistIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index that uniquely identifies a MAC change notification
event previously generated by the device. This index starts at
1 and increases by one when a MAC change notification is
generated. When it reaches the maximum value, the agent wraps
the value back to 1."
::= { jnxL2aldMacHistoryEntry 1 }
jnxL2aldHistMacChangedMsg OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..512))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the information of a MAC change
notification event. It consists of several tuples packed
together in the format of '<tuple1><tuple2>...'.
Each tuple consist of 13 octets in the format of
'<operation><VLAN INDEX><MAC><dot1dBasePort><VLAN TAG>' where
<operation> is of size 1 octet and supports the following values
0 - End of MIB object.
1 - MAC learnt.
2 - MAC removed.
3 - MAC updated.
<VLAN INDEX> is the index of the VLAN which the MAC address is
belonged to and has size of 2 octet.
<MAC> is the Layer2 Mac Address and has size of 6 octets.
<dot1dBasePort> is the value of dot1dBasePort for the
interface from which the MAC address is learnt and has size
of 2 octets.
<VLAN TAG> is the tag of the VLAN which the MAC address is
belonged to and has size of 2 octet."
::= { jnxL2aldMacHistoryEntry 2 }
jnxL2aldHistTimestamp OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime when the jnxL2aldMacChangedNotification
containing the information denoted by the jnxHistMacChangedMsg
object in this entry was generated."
::= { jnxL2aldMacHistoryEntry 3 }
jnxL2aldMacAddressesUpdated OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of MAC addresses updated by the
device."
::= { jnxL2aldMacNotificationMIBGlobalObjects 9 }
------------------------------------------------------------------------------------------
-- Juniper Vlan MIB Definitions
------------------------------------------------------------------------------------------
jnxL2aldVlanMIBObjects OBJECT IDENTIFIER
::= {jnxl2aldMib 3 }
-- VLAN Configuration
jnxL2aldVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxL2aldVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of VLAN names and characteristics."
::= { jnxL2aldVlanMIBObjects 1 }
jnxL2aldVlanEntry OBJECT-TYPE
SYNTAX JnxL2aldVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table entry containing VLAN names and characteristics."
INDEX { jnxL2aldVlanID }
::= { jnxL2aldVlanTable 1 }
JnxL2aldVlanEntry ::=
SEQUENCE {
jnxL2aldVlanID Unsigned32,
jnxL2aldVlanName DisplayString,
jnxL2aldVlanTag Integer32,
jnxL2aldVlanType INTEGER,
jnxL2aldVlanFdbId Unsigned32
}
jnxL2aldVlanID OBJECT-TYPE
SYNTAX Unsigned32(1..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is the locally significant ID that is used internally by this
device to reference this VLAN."
::= { jnxL2aldVlanEntry 1 }
jnxL2aldVlanName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Vlan name is the textual name and this is the identifier
that the user of a configuration utility will use."
::= { jnxL2aldVlanEntry 2 }
jnxL2aldVlanTag OBJECT-TYPE
SYNTAX Integer32(1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the locally significant ID that is used internally by this
device to reference this VLAN."
::= { jnxL2aldVlanEntry 3 }
jnxL2aldVlanType OBJECT-TYPE
SYNTAX INTEGER {
static (1),
dynamic(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vlan type can be
Static (1)
Dynamic(2)"
DEFVAL { 1 }
::= { jnxL2aldVlanEntry 4 }
jnxL2aldVlanFdbId OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identity of the Filtering Database dot1qFdbTable (A table that
contains configuration and control information for each Filtering
Database currently operating on this device)"
::= { jnxL2aldVlanEntry 5 }
------------------------------------------------------------------------------------------
-- Trap definitions
------------------------------------------------------------------------------------------
jnxl2aldRoutingInstMacLimit NOTIFICATION-TYPE
OBJECTS { jnxl2aldLogicalRouter,
jnxl2aldRoutingInst,
jnxl2aldBridgeDomain,
jnxl2aldMacLimit
}
STATUS current
DESCRIPTION
"This notification is generated when the MAC limit for
given routing instance (jnxl2aldRoutingInst) is reached.
This trap is send only once we exceed the limit value."
::= { jnxl2aldNotification 1 }
jnxl2aldInterfaceMacLimit NOTIFICATION-TYPE
OBJECTS { jnxl2aldIntfLogicalRouter,
jnxl2aldIntfRoutingInst,
jnxl2aldIntfBridgeDomain,
ifDescr,
jnxl2aldIntfMacLimit
}
STATUS current
DESCRIPTION
"This notification is generated when the MAC limit for
the given physical interface (jnxl2aldInterfaceMacLimit) is reached.
This trap is send only once we exceed the limit value."
::= { jnxl2aldNotification 2 }
jnxl2aldGlobalMacLimit NOTIFICATION-TYPE
OBJECTS { jnxl2aldGbMacLimit
}
STATUS current
DESCRIPTION
"This notification is generated when the MAC limit for
the entire system is reached.
This trap is send only once we exceed the limit value."
::= { jnxl2aldNotification 3 }
jnxl2aldMacMoveThreshold NOTIFICATION-TYPE
OBJECTS { jnxl2aldIntfLogicalRouter,
jnxl2aldIntfRoutingInst,
jnxl2aldIntfBridgeDomain,
ifDescr,
jnxl2aldMacAdress
}
STATUS current
DESCRIPTION
"This notification is generated when a mac move reaches threshold.
The given interface (ifDescr) will be blocked for the Bridge
Domain(jnxl2aldIntfBridgeDomain). This trap is send only once when
mac move count exceeds the threshold for the Mac(jnxl2aldMacAdress)."
::= { jnxl2aldNotification 4 }
jnxL2aldMacChangedNotification NOTIFICATION-TYPE
OBJECTS { jnxL2aldHistMacChangedMsg, jnxL2aldHistTimestamp }
STATUS current
DESCRIPTION
"This notification is generated when there is enough MAC
address information to fully occupy a maximum size SNMP trap
message. This notification is also generated when there
is at least one MAC address changed or removed and the amount
of time elapsed from the previous notification is greater
than the maximum wait time denoted by
jnxNotificationInterval object.
If there are more MAC addresses information than can fit into
one cmmHistTrapContent object, then multiple notifications
will be generated."
::= { jnxl2aldNotification 5 }
jnxl2aldMacPinningdiscard NOTIFICATION-TYPE
OBJECTS { jnxl2aldIntfLogicalRouter,
jnxl2aldIntfRoutingInst,
jnxl2aldIntfBridgeDomain,
jnxl2aldMacAdress,
jnxl2aldIntfMacPinningIntf,
jnxl2aldIntfDiscardIntf
}
STATUS current
DESCRIPTION
"This notification is generated for discarding packets in a bridge domain over an
IFL for MACs when learned over MAC pinning enabled interface and same MACs are
also seen over any other interfaces in the same bridge domain.
This trap is generated in configured interval of time when packets are discarded
over an IFL continuously."
::= { jnxl2aldNotification 6 }
END