1395 lines
49 KiB
Plaintext
1395 lines
49 KiB
Plaintext
-- extracted from pw-tdm-draft-08
|
|
|
|
JUNIPER-PW-TDM-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE,
|
|
Integer32, Counter32, Unsigned32, transmission
|
|
FROM SNMPv2-SMI
|
|
|
|
MODULE-COMPLIANCE, OBJECT-GROUP
|
|
FROM SNMPv2-CONF
|
|
|
|
TEXTUAL-CONVENTION, TruthValue, RowStatus, StorageType,
|
|
TimeStamp
|
|
FROM SNMPv2-TC
|
|
|
|
InterfaceIndexOrZero
|
|
FROM IF-MIB -- [IFMIB]
|
|
|
|
SnmpAdminString
|
|
FROM SNMP-FRAMEWORK-MIB -- [RFC3411]
|
|
|
|
PerfCurrentCount, PerfIntervalCount
|
|
FROM PerfHist-TC-MIB
|
|
|
|
-- Juniper Specific TDM MIB
|
|
jnxMibs
|
|
FROM JUNIPER-SMI -- *** JNX ***
|
|
|
|
|
|
jnxVpnPwVpnType, jnxVpnPwVpnName, jnxVpnPwIndex
|
|
FROM JUNIPER-VPN-MIB
|
|
|
|
jnxPwTdmMibRoot
|
|
FROM JUNIPER-SMI;
|
|
|
|
|
|
|
|
|
|
jnxPWTdmMIB MODULE-IDENTITY
|
|
|
|
LAST-UPDATED "200704030000Z"
|
|
ORGANIZATION "Pseudo-Wire Emulation Edge-to-Edge (PWE3)
|
|
Working Group"
|
|
CONTACT-INFO
|
|
" Orly Nicklass
|
|
Postal: RAD Data Communications
|
|
24 Raoul Wallenberg St., Bldg C
|
|
Tel Aviv 69719, Israel
|
|
Email: orly_n@rad.com
|
|
|
|
The PWE3 Working Group (email distribution pwe3@ietf.org,
|
|
http://www.ietf.org/html.charters/pwe3-charter.html)
|
|
"
|
|
|
|
DESCRIPTION
|
|
"This MIB contains managed object definitions for
|
|
encapsulating TDM (T1,E1, T3, E3, NxDS0) as
|
|
pseudo-wires over packet-switching networks (PSN).
|
|
|
|
This MIB supplements the PW-STD-MIB as in: Zelig, D.,
|
|
Nadeau,T. 'Pseudo Wire (PW) Management Information Base'.
|
|
The PW-STD-MIB contains structures and MIB associations
|
|
generic to Pseudo-Wire (PW) emulation. PW-specific
|
|
MIBs (such as this) contain config and stats for specific
|
|
PW types.
|
|
|
|
Copyright (C) The IETF Trust (2007). This version
|
|
of this MIB module is part of RFC yyyy; see the RFC
|
|
itself for full legal notices.
|
|
-- RFC Ed.: replace yyyy with actual RFC number & remove this
|
|
note"
|
|
|
|
REVISION "200704030000Z" -- April 2007
|
|
DESCRIPTION
|
|
"Initial version published as part of RFC YYYY."
|
|
-- RFC Editor: please replace YYYY with IANA assigned value, and
|
|
-- delete this note.
|
|
|
|
::= {jnxPwTdmMibRoot 1} --** JNX **
|
|
|
|
-- Local Textual conventions
|
|
JnxPwTDMCfgIndex ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index into the relevant pwXXXCfgTable."
|
|
SYNTAX Unsigned32 (1..4294967295)
|
|
|
|
|
|
JnxPwCfgIndexOrzero ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "d"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index in any of the relevant configuration tables for
|
|
supplement information regarding configuration of the
|
|
specific technology. Value 0 implies no additional
|
|
configuration information is applicable."
|
|
SYNTAX Unsigned32 (0..4294967295)
|
|
|
|
|
|
|
|
-- Tables, Scalars
|
|
jnxpwTDMObjects OBJECT IDENTIFIER ::= { jnxPWTdmMIB 1 }
|
|
-- Notifications
|
|
jnxpwTDMNotifications OBJECT IDENTIFIER ::= { jnxPWTdmMIB 2 }
|
|
-- Conformance
|
|
jnxpwTDMConformance OBJECT IDENTIFIER ::= { jnxPWTdmMIB 3 }
|
|
|
|
-- TDM PW table
|
|
|
|
jnxpwTDMTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JnxPwTDMEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains basic information including ifIndex,
|
|
and pointers to entries in the relevant TDM config
|
|
tables for this TDM PW."
|
|
::= { jnxpwTDMObjects 1 }
|
|
|
|
jnxpwTDMEntry OBJECT-TYPE
|
|
SYNTAX JnxPwTDMEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table is indexed by the same index that was
|
|
created for the associated entry in the PW Table
|
|
(in the PW-STD-MIB).
|
|
|
|
- The PwIndex.
|
|
|
|
An entry is created in this table by the agent for every
|
|
entry in the pwTable with a pwType equal to one of the
|
|
following:
|
|
e1Satop(17), t1Satop(18), e3Satop(19), t3Satop(20),
|
|
basicCesPsn(21), basicTdmIp(22), tdmCasCesPsn(23),
|
|
tdmCasTdmIp(24).
|
|
Unless otherwise specified, all RW objects in this table
|
|
MUST NOT be changed after row activation (see [PWMIB])
|
|
and should remain unchanged after reboot."
|
|
|
|
INDEX { jnxVpnPwVpnType, jnxVpnPwVpnName, jnxVpnPwIndex }
|
|
|
|
::= { jnxpwTDMTable 1 }
|
|
|
|
JnxPwTDMEntry ::= SEQUENCE {
|
|
|
|
jnxpwTDMRate Integer32,
|
|
jnxpwTDMIfIndex InterfaceIndexOrZero,
|
|
jnxpwGenTDMCfgIndex JnxPwCfgIndexOrzero,
|
|
jnxpwRelTDMCfgIndex JnxPwCfgIndexOrzero,
|
|
|
|
jnxpwTDMConfigError BITS,
|
|
jnxpwTDMTimeElapsed Integer32,
|
|
jnxpwTDMValidIntervals Integer32,
|
|
jnxpwTDMValidDayIntervals Integer32,
|
|
jnxpwTDMLastEsTimeStamp TimeStamp
|
|
}
|
|
|
|
jnxpwTDMRate OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
-- MAX-ACCESS read-write
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The parameter represents the bit-rate of the TDM service
|
|
in multiples of the 'basic' 64 Kbit/s rate [TDMCP-EXT].
|
|
It complements the definition of pwType used in
|
|
PW-STD-MIB.
|
|
For structure-agnostic the following should be used:
|
|
a) Satop E1 - 32
|
|
b) Satop T1 emulation:
|
|
i) MUST be set to 24 in the basic emulation mode
|
|
ii) MUST be set to 25 for the 'Octet-aligned T1'
|
|
emulation mode
|
|
c) Satop E3 - 535
|
|
d) Satop T3 - 699
|
|
For all kinds of structure-aware emulation, this parameter
|
|
MUST be set to N where N is the number of DS0 channels
|
|
in the corresponding attachment circuit."
|
|
REFERENCE
|
|
"TDMCP-EXT"
|
|
DEFVAL { 32 }
|
|
::= { jnxpwTDMEntry 1 }
|
|
|
|
jnxpwTDMIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
-- MAX-ACCESS read-write
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a unique index within the ifTable. It represents
|
|
the interface index of the full link or the interface
|
|
index for the bundle holding the group of
|
|
time slots to be transmitted via this PW connection.
|
|
|
|
A value of zero indicates an interface index that has yet
|
|
to be determined.
|
|
Once set, if the TDM ifIndex is (for some reason) later
|
|
removed, the agent SHOULD delete the associated PW rows
|
|
(e.g., this pwTDMTable entry). If the agent does not
|
|
delete the rows, the agent MUST set this object to
|
|
zero."
|
|
::= { jnxpwTDMEntry 2 }
|
|
|
|
jnxpwGenTDMCfgIndex OBJECT-TYPE
|
|
SYNTAX JnxPwCfgIndexOrzero
|
|
-- MAX-ACCESS read-write
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index to the generic parameters in the TDM configuration
|
|
table that appears in this MIB module. It is likely that
|
|
multiple TDM PWs of the same characteristic will share
|
|
a single TDM Cfg entry."
|
|
::= { jnxpwTDMEntry 3 }
|
|
|
|
jnxpwRelTDMCfgIndex OBJECT-TYPE
|
|
SYNTAX JnxPwCfgIndexOrzero
|
|
-- MAX-ACCESS read-write
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index to the relevant TDM configuration table entry
|
|
that appears in one of the related MIB modules
|
|
such as TDMoIP or CESoPSN. It is likely that
|
|
multiple TDM PWs of the same characteristic will share
|
|
a single configuration entry of the relevant type.
|
|
The value 0 implies no entry in other related MIB"
|
|
::= { jnxpwTDMEntry 4 }
|
|
|
|
jnxpwTDMConfigError OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
notApplicable ( 0),
|
|
tdmTypeIncompatible ( 1),
|
|
peerRtpIncompatible ( 2),
|
|
peerPayloadSizeIncompatible ( 3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Any of the bits are set if the local configuration is
|
|
not compatible with the peer configuration as available
|
|
from the various parameters options. Setting is done based
|
|
on signaling, or else value (0) will be set.
|
|
|
|
-tdmTypeIncompatible bit is set if the local configuration
|
|
is not carrying the same TDM type as the peer configuration.
|
|
|
|
-peerRtpIncompatible bit is set if the local configuration
|
|
is configured to send RTP packets for this PW, and the
|
|
remote is not capable of accepting RTP packets.
|
|
|
|
-peerPayloadSizeIncompatible bit is set if the local
|
|
configuration is not carrying the same Payload Size as the
|
|
peer configuration. "
|
|
::= { jnxpwTDMEntry 5}
|
|
|
|
jnxpwTDMTimeElapsed OBJECT-TYPE
|
|
SYNTAX Integer32 (1..900)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of seconds, including partial seconds,
|
|
that have elapsed since the beginning of the current
|
|
measurement period. If, for some reason, such as an
|
|
adjustment in the system's time-of-day clock, the
|
|
current interval exceeds the maximum value, the
|
|
agent will return the maximum value."
|
|
::= { jnxpwTDMEntry 6}
|
|
|
|
jnxpwTDMValidIntervals OBJECT-TYPE
|
|
SYNTAX Integer32 (0..96)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of previous 15-minute intervals for which data
|
|
was collected.
|
|
An agent with TDM capability must be capable of supporting
|
|
at least n intervals. The minimum value of n is 4, The
|
|
default of n is 32 and the maximum value of n is 96.
|
|
The value will be n unless the measurement was (re-)
|
|
started within the last (n*15) minutes, in which case
|
|
the value will be the number of complete 15 minute
|
|
intervals for which the agent has at least some data.
|
|
In certain cases(e.g., in the case where the agent is
|
|
a proxy) it is possible that some intervals are unavailable.
|
|
In this case, this interval is the maximum interval number
|
|
for which data is available. "
|
|
::= { jnxpwTDMEntry 7}
|
|
|
|
jnxpwTDMValidDayIntervals OBJECT-TYPE
|
|
SYNTAX Integer32 (0..30)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of previous days for which data
|
|
was collected.
|
|
An agent with TDM capability must be capable of supporting
|
|
at least n intervals. The minimum value of n is 1, The
|
|
default of n is 1 and the maximum value of n is 30."
|
|
::= { jnxpwTDMEntry 8}
|
|
|
|
jnxpwTDMLastEsTimeStamp OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of sysUpTime at the most recent occasion at
|
|
which the TDM PW entered the ES or SES state."
|
|
::= { jnxpwTDMEntry 11}
|
|
|
|
|
|
-- End of TDM PW table
|
|
|
|
-- PW Generic TDM PW Configuration Table
|
|
|
|
jnxpwTDMCfgIndexNext OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains the value to be used for
|
|
pwTDMCfgIndex when creating entries in the
|
|
pwTDMCfgTable. The value 0 indicates that no
|
|
unassigned entries are available. To obtain the
|
|
value of pwTDMCfgIndexNext for a new entry in the
|
|
pwTDMCfgTable, the manager issues a management
|
|
protocol retrieval operation. The agent will
|
|
determine through its local policy when this
|
|
index value will be made available for reuse."
|
|
|
|
::= { jnxpwTDMObjects 2 }
|
|
|
|
jnxpwTDMCfgTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JnxPwTDMCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains a set of parameters that may be
|
|
referenced by one or more TDM PWs in pwTDMTable."
|
|
|
|
::= { jnxpwTDMObjects 3 }
|
|
|
|
jnxpwTDMCfgEntry OBJECT-TYPE
|
|
SYNTAX JnxPwTDMCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"These parameters define the characteristics of a
|
|
TDM PW. They are grouped here to ease NMS burden.
|
|
Once an entry is created here it may be re-used
|
|
by many PWs.
|
|
Unless otherwise specified, all objects in this table
|
|
MUST NOT be changed after row activation (see [PWMIB])
|
|
if the row index is in used by an entry in pwTDMTable.
|
|
Rows should remain unchanged after reboot."
|
|
|
|
--INDEX { jnxpwTDMCfgIndex }
|
|
INDEX { jnxVpnPwVpnType, jnxVpnPwVpnName, jnxVpnPwIndex }
|
|
|
|
::= { jnxpwTDMCfgTable 1 }
|
|
|
|
JnxPwTDMCfgEntry ::= SEQUENCE {
|
|
jnxpwTDMCfgIndex JnxPwTDMCfgIndex,
|
|
jnxpwTDMCfgRowStatus RowStatus,
|
|
jnxpwTDMCfgPayloadSize Unsigned32,
|
|
jnxpwTDMCfgPktReorder TruthValue,
|
|
jnxpwTDMCfgRtpHdrUsed TruthValue,
|
|
jnxpwTDMCfgJtrBfrDepth Unsigned32,
|
|
jnxpwTDMCfgPayloadSuppression INTEGER,
|
|
|
|
jnxpwTDMCfgConsecPktsInSynch Unsigned32,
|
|
jnxpwTDMCfgConsecMissPktsOutSynch Unsigned32,
|
|
jnxpwTDMCfgSetUp2SynchTimeOut Unsigned32,
|
|
|
|
jnxpwTDMCfgPktReplacePolicy INTEGER,
|
|
|
|
jnxpwTDMCfgAvePktLossTimeWindow Integer32,
|
|
jnxpwTDMCfgExcessivePktLossThreshold Unsigned32,
|
|
|
|
jnxpwTDMCfgAlarmThreshold Unsigned32,
|
|
jnxpwTDMCfgClearAlarmThreshold Unsigned32,
|
|
|
|
jnxpwTDMCfgMissingPktsToSes Unsigned32,
|
|
|
|
jnxpwTDMCfgTimestampMode INTEGER,
|
|
jnxpwTDMCfgStorageType StorageType,
|
|
jnxpwTDMCfgPktFiller Unsigned32,
|
|
jnxpwTDMCfgName SnmpAdminString
|
|
}
|
|
|
|
jnxpwTDMCfgIndex OBJECT-TYPE
|
|
SYNTAX JnxPwTDMCfgIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index to an entry in this table. The value is a copy of the
|
|
assigned pwTDMCfgIndexNext"
|
|
::= { jnxpwTDMCfgEntry 1 }
|
|
|
|
jnxpwTDMCfgRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
-- MAX-ACCESS read-create
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Object used for creating, modifying, and deleting
|
|
a row from this table. The following objects should not be
|
|
modified if the entry is in used and the status is active:
|
|
pwTDMCfgPayloadSize, pwTDMCfgRtpHdrUsed,
|
|
pwTDMCfgJtrBfrDepth, and pwTDMCfgPayloadSuppression.
|
|
The row should not be deleted if the entry is in used"
|
|
::= { jnxpwTDMCfgEntry 2 }
|
|
|
|
jnxpwTDMCfgPayloadSize OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
-- MAX-ACCESS read-create
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of this object indicates the PayLoad Size (in bytes)
|
|
to be defined during the PW setUp. Upon TX, implementation
|
|
must be capable of carrying that amount of bytes.
|
|
Upon RX, when the LEN field is set to 0, the payload of
|
|
packet MUST assume this size, and if the actual
|
|
packet size is inconsistent with this length,
|
|
the packet MUST be considered to be malformed. "
|
|
::= { jnxpwTDMCfgEntry 4 }
|
|
|
|
jnxpwTDMCfgPktReorder OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
-- MAX-ACCESS read-create
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If set True: as CE bound packets are queued in the
|
|
jitter buffer, out of order packets are re-ordered. The
|
|
maximum sequence number differential (i.e., the range in
|
|
which re-sequencing can occur) is dependant on the depth
|
|
of the jitter buffer. See pwTDMCfgJtrBfrDepth.
|
|
|
|
NOTE: Some implementations may not support this feature.
|
|
The agent is then required to set this to False."
|
|
::= { jnxpwTDMCfgEntry 5 }
|
|
|
|
jnxpwTDMCfgRtpHdrUsed OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
-- MAX-ACCESS read-create
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If set to False: an RTP header is not pre-pended to the
|
|
TDM packet."
|
|
REFERENCE
|
|
"SATOP"
|
|
DEFVAL { false }
|
|
::= { jnxpwTDMCfgEntry 6 }
|
|
|
|
jnxpwTDMCfgJtrBfrDepth OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "microsecond"
|
|
-- MAX-ACCESS read-create
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The size of this buffer SHOULD be locally
|
|
configured to allow accommodation to the PSN-specific packet
|
|
delay variation.
|
|
|
|
If configured to a value not supported by the
|
|
implementation, the agent MUST return an error code
|
|
'jtrBfrDepth' in 'pwTDMConfigError '
|
|
|
|
NOTE: jitter buffers are a limited resource to
|
|
be managed. The actual size should be at least twice as big
|
|
as the value of pwTDMCfgJtrBfrDepth "
|
|
DEFVAL { 3000 }
|
|
|
|
::= { jnxpwTDMCfgEntry 7 }
|
|
|
|
jnxpwTDMCfgPayloadSuppression OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enable ( 1),
|
|
disable ( 2)
|
|
}
|
|
-- MAX-ACCESS read-create
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Selecting 'enable' means: Payload suppression is allowed.
|
|
Payload MAY be omitted in order to conserve bandwidth.
|
|
Selecting 'disable' means: no suppresion under any
|
|
condition.
|
|
Object MAY be changed at any time."
|
|
DEFVAL { disable }
|
|
|
|
::= { jnxpwTDMCfgEntry 8 }
|
|
|
|
jnxpwTDMCfgConsecPktsInSynch OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
-- MAX-ACCESS read-create
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of consecutive packets with sequential
|
|
sequence numbers that are required to exit the
|
|
LOPS state.
|
|
Object MAY be changed when the related PW is
|
|
defined as not active."
|
|
REFERENCE
|
|
"SATOP"
|
|
DEFVAL { 2 }
|
|
::= { jnxpwTDMCfgEntry 9 }
|
|
|
|
jnxpwTDMCfgConsecMissPktsOutSynch OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
-- MAX-ACCESS read-create
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of consecutive missing packets that are
|
|
required to enter the LOPS state.
|
|
Object MAY be changed when the related PW is
|
|
defined as not active."
|
|
REFERENCE
|
|
"SATOP"
|
|
DEFVAL { 10 }
|
|
::= { jnxpwTDMCfgEntry 10 }
|
|
|
|
jnxpwTDMCfgSetUp2SynchTimeOut OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "millisecond"
|
|
-- MAX-ACCESS read-create
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The amount of time the host should wait before declaring the
|
|
pseudo wire in down state, if the number of consecutive
|
|
TDM packets that have been received after changing the
|
|
adminstrative status to up and after finalization of
|
|
signaling (if supported) between the two PEs is smaller
|
|
than pwTDMCfgConsecPktsInSynch. Once the the pw has
|
|
OperStatus of 'up' this parameter is no longer valid. This
|
|
parameter is defined to ensure that the host does not
|
|
prematurely inform failure of the pw. In particular pw 'down'
|
|
notifications should not be sent before expiration of this
|
|
timer. This parameter is valid only after adminisrative
|
|
changes of the status of the pw. If the pw fails due to
|
|
network impairments a 'down' notification should be sent.
|
|
Object MAY be changed when the related PW is
|
|
defined as not active."
|
|
DEFVAL {5000}
|
|
::= { jnxpwTDMCfgEntry 11 }
|
|
|
|
jnxpwTDMCfgPktReplacePolicy OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
allOnes (1),
|
|
implementationSpecific(2),
|
|
filler (3) --user defined
|
|
}
|
|
-- MAX-ACCESS read-create
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This parameter determines the value to be played when CE bound
|
|
packets have over/underflow the jitter buffer, or are missing
|
|
for any reason. This byte pattern is sent(played)on
|
|
the TDM line. Selecting implementationSpecific(2) implies
|
|
agent specific algorithm. Selecting filler(3) requires setting
|
|
of pwTDMCfgPktFiller.
|
|
Object MAY be changed when the related PW is
|
|
defined as not active."
|
|
DEFVAL { allOnes } -- Play AIS
|
|
::= { jnxpwTDMCfgEntry 12 }
|
|
|
|
jnxpwTDMCfgAvePktLossTimeWindow OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "millisecond"
|
|
-- MAX-ACCESS read-create
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The length of time over which the average packet
|
|
loss rate should be computed to detect Excessive packet
|
|
loss rate.
|
|
Object MAY be changed when the related PW is
|
|
defined as not active."
|
|
::= { jnxpwTDMCfgEntry 13}
|
|
|
|
jnxpwTDMCfgExcessivePktLossThreshold OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "Percent"
|
|
-- MAX-ACCESS read-create
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Excessive packet loss rate is detected by computing the
|
|
average packetloss rate over a pwTDMCfgAvePktLossTimeWindow
|
|
amount of time and comparing it with this threshold value.
|
|
The rate is expressed in precentage.
|
|
Object MAY be changed when the related PW is
|
|
defined as not active."
|
|
::= { jnxpwTDMCfgEntry 14 }
|
|
|
|
|
|
jnxpwTDMCfgAlarmThreshold OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
-- MAX-ACCESS read-create
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Alarms are only reported when the defect state persists
|
|
for the length of time specified by this object.
|
|
The object's unit is millisec.
|
|
Object MAY be changed when the related PW is
|
|
defined as not active."
|
|
DEFVAL { 2500 }
|
|
::= { jnxpwTDMCfgEntry 15 }
|
|
|
|
jnxpwTDMCfgClearAlarmThreshold OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
-- MAX-ACCESS read-create
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Alarm MUST be cleared after the corresponding defect is
|
|
undetected for the amount of time specified by this object.
|
|
The object's unit is millisec.
|
|
Object MAY be changed when the related PW is
|
|
defined as not active."
|
|
DEFVAL { 10000 }
|
|
::= { jnxpwTDMCfgEntry 16 }
|
|
|
|
jnxpwTDMCfgMissingPktsToSes OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "Percent"
|
|
-- MAX-ACCESS read-create
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Percent of missing packets detected (consecutive or not)
|
|
within a 1 second window to cause a Severely Error
|
|
Second (SES) to be counted.
|
|
Object MAY be changed when the related PW is
|
|
defined as not active."
|
|
DEFVAL { 30 }
|
|
::= { jnxpwTDMCfgEntry 17 }
|
|
|
|
jnxpwTDMCfgTimestampMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
notApplicable (1),
|
|
absolute (2),
|
|
differential (3)
|
|
}
|
|
|
|
-- MAX-ACCESS read-create
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Timestamp generation MAY be used in one of the following
|
|
modes:
|
|
1. Absolute mode: the PSN-bound IWF sets timestamps
|
|
using the clock recovered from the incoming TDM attachment
|
|
circuit. As a consequence, the timestamps are closely
|
|
correlated with the sequence numbers. All TDM implementations
|
|
that support usage of the RTP header MUST support this mode.
|
|
2. Differential mode: Both IWFs have access to a common high-
|
|
quality timing source, and this source is used for timestamp
|
|
generation. Support of this mode is OPTIONAL.
|
|
Object MAY be changed when the related PW is
|
|
defined as not active."
|
|
|
|
::= { jnxpwTDMCfgEntry 18 }
|
|
|
|
jnxpwTDMCfgStorageType OBJECT-TYPE
|
|
SYNTAX StorageType
|
|
-- MAX-ACCESS read-create
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates the storage type for this
|
|
row."
|
|
::= { jnxpwTDMCfgEntry 19 }
|
|
|
|
jnxpwTDMCfgPktFiller OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..255)
|
|
-- MAX-ACCESS read-create
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Filler byte pattern played out on the TDM
|
|
interface if pwTDMCfgPktReplacePolicy
|
|
was set to filler(3).
|
|
Object MAY be changed when the related PW is
|
|
defined as not active."
|
|
DEFVAL
|
|
{ 255 } -- Play all ones, equal to AIS indications.
|
|
::= { jnxpwTDMCfgEntry 20 }
|
|
|
|
|
|
jnxpwTDMCfgName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
-- MAX-ACCESS read-create
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A descriptive string, prefereably unique name, to an entry
|
|
in this table.
|
|
Object MAY be changed at any time."
|
|
::= { jnxpwTDMCfgEntry 21 }
|
|
|
|
-- END of Table
|
|
|
|
-- The following counters work together to integrate
|
|
-- errors and the lack of errors on the TDM PW. An error is
|
|
-- caused by a missing packet. Missing packet can be a result
|
|
-- of: packet loss in the network, (uncorrectable) packet out
|
|
-- of sequence, packet length error, jitter buffer overflow,
|
|
-- and jitter buffer underflow. The result is declaring whether
|
|
-- or not the TDM PW is in Loss of Packet (LOPS) state.
|
|
|
|
-- TDM PW Performance Current Table.
|
|
|
|
jnxpwTDMPerfCurrentTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JnxPwTDMPerfCurrentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current 15 minute interval counts are in
|
|
this table.
|
|
|
|
This table provides per TDM PW performance information."
|
|
|
|
::= { jnxpwTDMObjects 5 }
|
|
|
|
jnxpwTDMPerfCurrentEntry OBJECT-TYPE
|
|
SYNTAX JnxPwTDMPerfCurrentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in this table is created by the agent for every
|
|
pwTDMTable entry. After 15 minutes, the contents of this
|
|
table entry are copied to a new entry in the
|
|
pwTDMPerfInterval table and the counts in this entry
|
|
are reset to zero."
|
|
|
|
-- INDEX { jnxpwIndex }
|
|
INDEX { jnxVpnPwVpnType, jnxVpnPwVpnName, jnxVpnPwIndex }
|
|
|
|
::= { jnxpwTDMPerfCurrentTable 1 }
|
|
|
|
JnxPwTDMPerfCurrentEntry ::= SEQUENCE {
|
|
|
|
jnxpwTDMPerfCurrentMissingPkts PerfCurrentCount,
|
|
jnxpwTDMPerfCurrentPktsReOrder PerfCurrentCount,
|
|
jnxpwTDMPerfCurrentJtrBfrUnderruns PerfCurrentCount,
|
|
jnxpwTDMPerfCurrentMisOrderDropped PerfCurrentCount,
|
|
jnxpwTDMPerfCurrentMalformedPkt PerfCurrentCount,
|
|
|
|
jnxpwTDMPerfCurrentESs PerfCurrentCount,
|
|
jnxpwTDMPerfCurrentSESs PerfCurrentCount,
|
|
jnxpwTDMPerfCurrentUASs PerfCurrentCount,
|
|
jnxpwTDMPerfCurrentFC PerfCurrentCount
|
|
}
|
|
|
|
jnxpwTDMPerfCurrentMissingPkts OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of missing packets (as detected via control word
|
|
sequence number gaps)."
|
|
::= { jnxpwTDMPerfCurrentEntry 1 }
|
|
|
|
jnxpwTDMPerfCurrentPktsReOrder OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of packets detected out of sequence (via control
|
|
word sequence number), but successfully re-ordered.
|
|
Note: some implementations may not support this Feature."
|
|
::= { jnxpwTDMPerfCurrentEntry 2 }
|
|
|
|
|
|
jnxpwTDMPerfCurrentJtrBfrUnderruns OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of times a packet needed to be played
|
|
out and the jitter buffer was empty."
|
|
::= { jnxpwTDMPerfCurrentEntry 3 }
|
|
|
|
jnxpwTDMPerfCurrentMisOrderDropped OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of packets detected out of order(via control word
|
|
sequence numbers), and could not be re-ordered, or could
|
|
not fit in the jitter buffer."
|
|
::= { jnxpwTDMPerfCurrentEntry 4 }
|
|
|
|
jnxpwTDMPerfCurrentMalformedPkt OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of packets detected with unexpected size, or
|
|
bad headers' stack"
|
|
::= { jnxpwTDMPerfCurrentEntry 5 }
|
|
|
|
jnxpwTDMPerfCurrentESs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of Error
|
|
Seconds encountered. Any malformed packet, seq. error, LOPS
|
|
and similar are considered as error second"
|
|
::= { jnxpwTDMPerfCurrentEntry 6 }
|
|
|
|
jnxpwTDMPerfCurrentSESs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
Severely Error Seconds encountered. "
|
|
::= { jnxpwTDMPerfCurrentEntry 7 }
|
|
|
|
jnxpwTDMPerfCurrentUASs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
Unavailable Seconds encountered. Any consequtive
|
|
ten seconds of SES are counted as one UAS"
|
|
::= { jnxpwTDMPerfCurrentEntry 8 }
|
|
|
|
jnxpwTDMPerfCurrentFC OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"TDM Failure Counts (FC-TDM). The number of TDM failure
|
|
events. A failure event begins when the LOPS failure
|
|
is declared, and ends when the failure is cleared. A
|
|
failure event that begins in one period and ends in
|
|
another period is counted only in the period in which
|
|
it begins."
|
|
::= { jnxpwTDMPerfCurrentEntry 9 }
|
|
|
|
-- End TDM PW Performance Current Interval Table
|
|
|
|
|
|
-- TDM PW Performance Interval Table.
|
|
|
|
jnxpwTDMPerfIntervalTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JnxPwTDMPerfIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table provides performance information per TDM PW
|
|
similar to the pwTDMPerfCurrentTable above. However,
|
|
these counts represent historical 15 minute intervals.
|
|
Typically, this table will have a maximum of 96 entries
|
|
for a 24 hour period, but is not limited to this. "
|
|
::= { jnxpwTDMObjects 6 }
|
|
|
|
jnxpwTDMPerfIntervalEntry OBJECT-TYPE
|
|
SYNTAX JnxPwTDMPerfIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in this table is created by the agent for
|
|
every pwTDMPerfCurrentEntry that is 15 minutes old.
|
|
The contents of the Current entry are copied to the new
|
|
entry here. The Current entry, then resets its counts
|
|
to zero for the next current 15 minute interval. "
|
|
|
|
-- INDEX { jnxpwIndex, jnxpwTDMPerfIntervalNumber }
|
|
INDEX { jnxVpnPwVpnType, jnxVpnPwVpnName, jnxVpnPwIndex , jnxpwTDMPerfIntervalNumber }
|
|
|
|
::= { jnxpwTDMPerfIntervalTable 1 }
|
|
|
|
JnxPwTDMPerfIntervalEntry ::= SEQUENCE {
|
|
jnxpwTDMPerfIntervalNumber Unsigned32,
|
|
jnxpwTDMPerfIntervalValidData TruthValue,
|
|
jnxpwTDMPerfIntervalDuration Unsigned32,
|
|
|
|
jnxpwTDMPerfIntervalMissingPkts PerfIntervalCount,
|
|
jnxpwTDMPerfIntervalPktsReOrder PerfIntervalCount,
|
|
jnxpwTDMPerfIntervalJtrBfrUnderruns PerfIntervalCount,
|
|
jnxpwTDMPerfIntervalMisOrderDropped PerfIntervalCount,
|
|
jnxpwTDMPerfIntervalMalformedPkt PerfIntervalCount,
|
|
|
|
jnxpwTDMPerfIntervalESs PerfIntervalCount,
|
|
jnxpwTDMPerfIntervalSESs PerfIntervalCount,
|
|
jnxpwTDMPerfIntervalUASs PerfIntervalCount,
|
|
jnxpwTDMPerfIntervalFC PerfIntervalCount
|
|
}
|
|
|
|
jnxpwTDMPerfIntervalNumber OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A number (normally between 1 and 96 to cover a 24 hour
|
|
period) which identifies the interval for which the set
|
|
of statistics is available. The interval identified by 1
|
|
is the most recently completed 15 minute interval, and
|
|
the interval identified by N is the interval immediately
|
|
preceding the one identified by N-1. The minimum range of
|
|
N is 1 through 4. The default range is 1 through 32. The
|
|
maximum value of N is 1 through 96."
|
|
::= { jnxpwTDMPerfIntervalEntry 1 }
|
|
|
|
jnxpwTDMPerfIntervalValidData OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates if the data for this interval
|
|
is valid."
|
|
::= { jnxpwTDMPerfIntervalEntry 2 }
|
|
|
|
jnxpwTDMPerfIntervalDuration OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The duration of a particular interval in seconds,
|
|
Adjustments in the system's time-of-day clock, may
|
|
cause the interval to be greater or less than, the
|
|
normal value. Therefore this actual interval value
|
|
is provided."
|
|
::= { jnxpwTDMPerfIntervalEntry 3 }
|
|
|
|
jnxpwTDMPerfIntervalMissingPkts OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of missing packets (as detected via control
|
|
word sequence number gaps)."
|
|
::= { jnxpwTDMPerfIntervalEntry 4 }
|
|
|
|
jnxpwTDMPerfIntervalPktsReOrder OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of packets detected out of sequence (via control
|
|
word sequence number), but successfully re-ordered.
|
|
Note: some implementations may not support this
|
|
Feature."
|
|
::= { jnxpwTDMPerfIntervalEntry 5 }
|
|
|
|
jnxpwTDMPerfIntervalJtrBfrUnderruns OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of times a packet needed to be played
|
|
out and the jitter buffer was empty."
|
|
::= { jnxpwTDMPerfIntervalEntry 6 }
|
|
|
|
jnxpwTDMPerfIntervalMisOrderDropped OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of packets detected out of order(via control word
|
|
sequence numbers), and could not be re-ordered, or could
|
|
not fit in the jitter buffer."
|
|
::= { jnxpwTDMPerfIntervalEntry 7 }
|
|
|
|
jnxpwTDMPerfIntervalMalformedPkt OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of packets detected with unexpected size, or
|
|
bad headers' stack"
|
|
::= { jnxpwTDMPerfIntervalEntry 8 }
|
|
|
|
|
|
jnxpwTDMPerfIntervalESs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of Error
|
|
Seconds encountered."
|
|
::= { jnxpwTDMPerfIntervalEntry 9 }
|
|
|
|
jnxpwTDMPerfIntervalSESs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
Severely Error Seconds encountered."
|
|
::= { jnxpwTDMPerfIntervalEntry 10 }
|
|
|
|
jnxpwTDMPerfIntervalUASs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
Unavailable Seconds encountered."
|
|
::= { jnxpwTDMPerfIntervalEntry 11 }
|
|
|
|
jnxpwTDMPerfIntervalFC OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"TDM Failure Counts (FC-TDM). The number of TDM failure
|
|
events. A failure event begins when the LOPS failure
|
|
is declared, and ends when the failure is cleared. A
|
|
failure event that begins in one period and ends in
|
|
another period is counted only in the period in which
|
|
it begins."
|
|
::= { jnxpwTDMPerfIntervalEntry 12 }
|
|
|
|
-- End TDM PW Performance Interval Table
|
|
|
|
|
|
-- TDM PW 1day Performance Table
|
|
|
|
jnxpwTDMPerf1DayIntervalTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JnxPwTDMPerf1DayIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table provides performance information per TDM PW
|
|
similar to the pwTDMPerfIntervalTable above. However,
|
|
these counters represent historical 1 day intervals up to
|
|
one full month. The table consists of real time data, as
|
|
such it is not persistence across re-boot."
|
|
::= { jnxpwTDMObjects 7 }
|
|
|
|
jnxpwTDMPerf1DayIntervalEntry OBJECT-TYPE
|
|
SYNTAX JnxPwTDMPerf1DayIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry is created in this table by the agent
|
|
for every entry in the pwTDMTable table."
|
|
|
|
INDEX { jnxVpnPwVpnType, jnxVpnPwVpnName, jnxVpnPwIndex, jnxpwTDMPerf1DayIntervalNumber }
|
|
|
|
::= { jnxpwTDMPerf1DayIntervalTable 1 }
|
|
|
|
JnxPwTDMPerf1DayIntervalEntry ::= SEQUENCE {
|
|
jnxpwTDMPerf1DayIntervalNumber Unsigned32,
|
|
jnxpwTDMPerf1DayIntervalValidData TruthValue,
|
|
jnxpwTDMPerf1DayIntervalDuration Unsigned32,
|
|
jnxpwTDMPerf1DayIntervalMissingPkts Counter32,
|
|
jnxpwTDMPerf1DayIntervalPktsReOrder Counter32,
|
|
jnxpwTDMPerf1DayIntervalJtrBfrUnderruns Counter32,
|
|
jnxpwTDMPerf1DayIntervalMisOrderDropped Counter32,
|
|
jnxpwTDMPerf1DayIntervalMalformedPkt Counter32,
|
|
|
|
jnxpwTDMPerf1DayIntervalESs Counter32,
|
|
jnxpwTDMPerf1DayIntervalSESs Counter32,
|
|
jnxpwTDMPerf1DayIntervalUASs Counter32,
|
|
jnxpwTDMPerf1DayIntervalFC Counter32
|
|
}
|
|
|
|
|
|
jnxpwTDMPerf1DayIntervalNumber OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of interval, where 1 indicates current day
|
|
measured period and 2 and above indicate previous days
|
|
respectively"
|
|
::= { jnxpwTDMPerf1DayIntervalEntry 1 }
|
|
|
|
jnxpwTDMPerf1DayIntervalValidData OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates if the data for this interval
|
|
is valid."
|
|
::= { jnxpwTDMPerf1DayIntervalEntry 2 }
|
|
|
|
jnxpwTDMPerf1DayIntervalDuration OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The duration of a particular interval in seconds,
|
|
Adjustments in the system's time-of-day clock, may
|
|
cause the interval to be greater or less than, the
|
|
normal value. Therefore this actual interval value
|
|
is provided."
|
|
::= { jnxpwTDMPerf1DayIntervalEntry 3 }
|
|
|
|
jnxpwTDMPerf1DayIntervalMissingPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of missing packets (as detected via control word
|
|
sequence number gaps)."
|
|
::= { jnxpwTDMPerf1DayIntervalEntry 4 }
|
|
|
|
jnxpwTDMPerf1DayIntervalPktsReOrder OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of packets detected out of sequence (via control
|
|
word sequence number), but successfully re-ordered.
|
|
Note: some implementations may not support this
|
|
feature."
|
|
::= { jnxpwTDMPerf1DayIntervalEntry 5 }
|
|
|
|
jnxpwTDMPerf1DayIntervalJtrBfrUnderruns OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of times a packet needed to be played
|
|
out and the jitter buffer was empty."
|
|
::= { jnxpwTDMPerf1DayIntervalEntry 6 }
|
|
|
|
jnxpwTDMPerf1DayIntervalMisOrderDropped OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of packets detected out of order(via control word
|
|
sequence numbers), and could not be re-ordered, or could
|
|
not fit in the jitter buffer."
|
|
::= { jnxpwTDMPerf1DayIntervalEntry 7 }
|
|
|
|
jnxpwTDMPerf1DayIntervalMalformedPkt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of packets detected with unexpected size, or
|
|
bad headers' stack."
|
|
::= { jnxpwTDMPerf1DayIntervalEntry 8 }
|
|
|
|
|
|
jnxpwTDMPerf1DayIntervalESs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of Error
|
|
Seconds encountered."
|
|
::= { jnxpwTDMPerf1DayIntervalEntry 9 }
|
|
|
|
jnxpwTDMPerf1DayIntervalSESs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of Severely
|
|
Error Seconds."
|
|
::= { jnxpwTDMPerf1DayIntervalEntry 10 }
|
|
|
|
jnxpwTDMPerf1DayIntervalUASs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
UnAvailable Seconds.
|
|
|
|
NOTE: When first entering the UAS state, the number
|
|
of SES To UAS is added to this object, then as each
|
|
additional UAS occurs, this object increments by one."
|
|
|
|
::= { jnxpwTDMPerf1DayIntervalEntry 11 }
|
|
|
|
jnxpwTDMPerf1DayIntervalFC OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"TDM Failure Counts (FC-TDM). The number of TDM failure
|
|
events. A failure event begins when the LOPS failure
|
|
is declared, and ends when the failure is cleared."
|
|
::= { jnxpwTDMPerf1DayIntervalEntry 12 }
|
|
|
|
-- End of PW TDM Performance table
|
|
|
|
-- Conformance Information
|
|
|
|
|
|
jnxpwTDMGroups OBJECT IDENTIFIER ::= { jnxpwTDMConformance 1 }
|
|
jnxpwTDMCompliances OBJECT IDENTIFIER ::= { jnxpwTDMConformance 2 }
|
|
|
|
|
|
jnxpwTDMModuleCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for agent that support TDM PW
|
|
over PSN operation."
|
|
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS { jnxpwTDMGroup,
|
|
jnxpwTDMPerfCurrentGroup,
|
|
jnxpwTDMPerfIntervalGroup,
|
|
jnxpwTDMPerf1DayIntervalGroup
|
|
}
|
|
|
|
|
|
OBJECT jnxpwGenTDMCfgIndex
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"The ability to set the an index pointer
|
|
is not required."
|
|
|
|
OBJECT jnxpwRelTDMCfgIndex
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"The ability to set the an index pointer
|
|
is not required."
|
|
|
|
OBJECT jnxpwTDMCfgPktReorder
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"The ability to set the packet reordering
|
|
is not required."
|
|
|
|
OBJECT jnxpwTDMCfgRtpHdrUsed
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"The ability to set whether to use the
|
|
RTP header or not is not required."
|
|
|
|
OBJECT jnxpwTDMCfgPayloadSuppression
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"The ability to set this object is not
|
|
required."
|
|
|
|
OBJECT jnxpwTDMCfgPktReplacePolicy
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"The ability to set the replace policy
|
|
is not required."
|
|
|
|
OBJECT jnxpwTDMCfgStorageType
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"The ability to set the storage type is
|
|
not required."
|
|
|
|
OBJECT jnxpwTDMCfgPktFiller
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"The ability to set the Filler pattern
|
|
is not required."
|
|
OBJECT jnxpwTDMCfgName
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"The ability to set the an Aliase
|
|
is not required."
|
|
|
|
::= { jnxpwTDMCompliances 1 }
|
|
|
|
-- Units of conformance.
|
|
|
|
jnxpwTDMGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
jnxpwTDMRate,
|
|
jnxpwTDMIfIndex,
|
|
jnxpwGenTDMCfgIndex,
|
|
jnxpwRelTDMCfgIndex,
|
|
jnxpwTDMConfigError,
|
|
jnxpwTDMTimeElapsed,
|
|
jnxpwTDMValidIntervals,
|
|
jnxpwTDMValidDayIntervals,
|
|
|
|
jnxpwTDMLastEsTimeStamp,
|
|
|
|
jnxpwTDMCfgIndexNext,
|
|
|
|
jnxpwTDMCfgRowStatus,
|
|
|
|
jnxpwTDMCfgPayloadSize,
|
|
jnxpwTDMCfgPktReorder,
|
|
jnxpwTDMCfgRtpHdrUsed,
|
|
jnxpwTDMCfgJtrBfrDepth,
|
|
jnxpwTDMCfgPayloadSuppression,
|
|
jnxpwTDMCfgConsecPktsInSynch,
|
|
jnxpwTDMCfgConsecMissPktsOutSynch,
|
|
jnxpwTDMCfgSetUp2SynchTimeOut,
|
|
|
|
jnxpwTDMCfgPktReplacePolicy,
|
|
|
|
jnxpwTDMCfgAvePktLossTimeWindow ,
|
|
jnxpwTDMCfgExcessivePktLossThreshold,
|
|
|
|
jnxpwTDMCfgAlarmThreshold ,
|
|
jnxpwTDMCfgClearAlarmThreshold,
|
|
jnxpwTDMCfgMissingPktsToSes,
|
|
|
|
jnxpwTDMCfgTimestampMode,
|
|
jnxpwTDMCfgStorageType,
|
|
jnxpwTDMCfgPktFiller,
|
|
|
|
jnxpwTDMCfgName
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Collection of objects for basic TDM PW config and
|
|
status."
|
|
::= { jnxpwTDMGroups 1 }
|
|
|
|
jnxpwTDMPerfCurrentGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
jnxpwTDMPerfCurrentMissingPkts,
|
|
jnxpwTDMPerfCurrentPktsReOrder,
|
|
jnxpwTDMPerfCurrentJtrBfrUnderruns,
|
|
jnxpwTDMPerfCurrentMisOrderDropped,
|
|
jnxpwTDMPerfCurrentMalformedPkt,
|
|
|
|
jnxpwTDMPerfCurrentESs,
|
|
jnxpwTDMPerfCurrentSESs,
|
|
jnxpwTDMPerfCurrentUASs,
|
|
jnxpwTDMPerfCurrentFC
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Collection of current statistics objects for TDM PWs."
|
|
::= { jnxpwTDMGroups 2 }
|
|
|
|
|
|
jnxpwTDMPerfIntervalGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
jnxpwTDMPerfIntervalValidData,
|
|
jnxpwTDMPerfIntervalDuration,
|
|
|
|
jnxpwTDMPerfIntervalMissingPkts,
|
|
jnxpwTDMPerfIntervalPktsReOrder,
|
|
jnxpwTDMPerfIntervalJtrBfrUnderruns,
|
|
jnxpwTDMPerfIntervalMisOrderDropped,
|
|
jnxpwTDMPerfIntervalMalformedPkt,
|
|
|
|
jnxpwTDMPerfIntervalESs,
|
|
jnxpwTDMPerfIntervalSESs,
|
|
jnxpwTDMPerfIntervalUASs,
|
|
jnxpwTDMPerfIntervalFC
|
|
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Collection of Interval statistics objects for TDM PWs."
|
|
::= { jnxpwTDMGroups 3 }
|
|
|
|
|
|
jnxpwTDMPerf1DayIntervalGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
jnxpwTDMPerf1DayIntervalValidData,
|
|
jnxpwTDMPerf1DayIntervalDuration,
|
|
jnxpwTDMPerf1DayIntervalMissingPkts,
|
|
jnxpwTDMPerf1DayIntervalPktsReOrder,
|
|
jnxpwTDMPerf1DayIntervalJtrBfrUnderruns,
|
|
jnxpwTDMPerf1DayIntervalMisOrderDropped,
|
|
jnxpwTDMPerf1DayIntervalMalformedPkt,
|
|
|
|
jnxpwTDMPerf1DayIntervalESs,
|
|
jnxpwTDMPerf1DayIntervalSESs,
|
|
jnxpwTDMPerf1DayIntervalUASs,
|
|
jnxpwTDMPerf1DayIntervalFC
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Collection of Daily statistics objects for TDM PWs."
|
|
::= { jnxpwTDMGroups 4 }
|
|
|
|
|
|
|
|
END
|