david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
98a672123c
mibs/MIBS/junos/JUNIPER-WX-MIB
David Leutgeb 98a672123c Initial commit
2023-12-05 12:25:34 +01:00

1809 lines
46 KiB
Plaintext
Raw Blame History

-- End - JUNIPER-WX-COMMON-MIB Module
-- ========================================================================
-- Start - JUNIPER-WX-MIB Module
-- WX MIB for the WAN Acceleration
--
-- The convention described in "Understanding SNMP MIBs"
-- (David Perkins, Evan McGinnis), Chapter 8, has generally been followed.
JUNIPER-WX-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-IDENTITY,
OBJECT-TYPE, NOTIFICATION-TYPE,
Integer32, Unsigned32, Gauge32, Counter64, IpAddress
FROM SNMPv2-SMI
-- MODULE-COMPLIANCE, OBJECT-GROUP
-- FROM SNMPv2-CONF
TimeStamp
FROM SNMPv2-TC
jnxWxModules, jnxWxSpecificMib
FROM JUNIPER-WX-GLOBAL-REG
TcAppName, TcQosIdentifier
FROM JUNIPER-WX-GLOBAL-TC
jnxWxCommonEventDescr
FROM JUNIPER-WX-COMMON-MIB;
jnxWxMibModule MODULE-IDENTITY
LAST-UPDATED "200203280000Z"
ORGANIZATION "Juniper Networks, Inc"
CONTACT-INFO "
Customer Support
Juniper Networks, Inc.
1194 North Mathilda Avenue
Sunnyvale, CA 94089
+1 888-314-JTAC
support@juniper.net"
DESCRIPTION "
A MIB module containing definitions of managed objects
for Juniper Networks' WAN Acceleration family of products."
REVISION "200405240000Z"
DESCRIPTION "
Add jnxWxEventMultiPathStatusChange notification."
REVISION "200306230000Z"
DESCRIPTION "
o Add compression and throughput statistics
to the jnxWxSysStats group.
o Add bytes counts to jnxWxAsmStatsTable.
o Add bytes counts and bytes-in percentage
to jnxWxAppStatsTable.
o Add jnxWxAppAggrStatsTable."
REVISION "200203280000Z"
DESCRIPTION "
Add SessionOpened, RegServerUnreachable notifications."
REVISION "200203270000Z"
DESCRIPTION "
Add SessionClosed, BufferOverflow notifications."
REVISION "200112191200Z"
DESCRIPTION "
Rev 1.0
Initial version of MIB module JUNIPER-WX-MIB."
::= { jnxWxModules 4 }
jnxWxMib OBJECT-IDENTITY
STATUS current
DESCRIPTION "
Sub-tree for WAN Acceleration MIB."
::= { jnxWxSpecificMib 1 }
jnxWxConfMib OBJECT-IDENTITY
STATUS current
DESCRIPTION "
Sub-tree for WAN Acceleration MIB conformance statements."
::= { jnxWxMib 1 }
jnxWxObjs OBJECT-IDENTITY
STATUS current
DESCRIPTION "
Sub-tree for WAN Acceleration MIB objects."
::= { jnxWxMib 2 }
jnxWxEvents OBJECT-IDENTITY
STATUS current
DESCRIPTION "
Sub-tree for WAN Acceleration MIB events."
::= { jnxWxMib 3 }
----------------------------------------------------------------------
-- Stats update time
jnxWxStatsUpdateTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the value of sysUpTime when the WX stats (jnxWxSysStats,
jnxWxAsm, jnxWxApp) were last updated. The management station
can use this information to tell if it's downloading a consistent set
of stats."
::= { jnxWxObjs 1 }
jnxWxStatsAsmCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Decompressors this Compressor has had a session
with at any time during the last two months."
::= { jnxWxObjs 2 }
jnxWxStatsVirtEndptCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of virtual endpoints configured
on this WX"
::= { jnxWxObjs 9 }
jnxWxStatsAppCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of applications currently being monitored on this Compressor."
::= { jnxWxObjs 3 }
jnxWxStatsAccelAppCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of applications currently being accelerated on this Compressor."
::= { jnxWxObjs 8 }
jnxWxStatsQosClassCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of QoS classes currently being monitored on this Compressor."
::= { jnxWxObjs 11 }
jnxWxStatsQosEndptCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of QoS endpoints currently being monitored on this Compressor."
::= { jnxWxObjs 12 }
jnxWxStatsWpEndptCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of endpoints with WAN performance monitoring
enabled"
::= { jnxWxObjs 13 }
----------------------------------------------------------------------
-- The WX System group
jnxWxSysStats OBJECT-IDENTITY
STATUS current
DESCRIPTION "
Sub-tree for WAN Acceleration system statistics."
::= { jnxWxObjs 4 }
-- Decompression stats
jnxWxSysStatsBytesInAe OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of bytes that entered the WX Assembly Engine
since the system was started."
::= { jnxWxSysStats 1 }
jnxWxSysStatsBytesOutAe OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of bytes that exited the WX Assembly Engine
after assembly since the system was started."
::= { jnxWxSysStats 2 }
jnxWxSysStatsPktsInAe OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of packets that entered the WX Assembly Engine
since the system was started."
::= { jnxWxSysStats 3 }
jnxWxSysStatsPktsOutAe OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of packets that exited the WX Assembly Engine
after assembly since the system was started."
::= { jnxWxSysStats 4 }
-- Out-of-band stats
jnxWxSysStatsBytesOutOob OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of out-of-band bytes sent to the control channel
since the system was started."
::= { jnxWxSysStats 5 }
-- Pass-through stats
jnxWxSysStatsBytesPtNoAe OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of bytes that passed through the WX Compression Engine
because there was no corresponding Assembly Engine WX, since the
system was started."
::= { jnxWxSysStats 6 }
jnxWxSysStatsPktsPtNoAe OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of packets that passed through the WX Compression Engine
because there was no corresponding Assembly Engine WX, since the
system was started."
::= { jnxWxSysStats 7 }
jnxWxSysStatsBytesPtFilter OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of bytes that passed through the WX Compression Engine
due to a manually configured filter (such as an application
filter), since the system was started."
::= { jnxWxSysStats 8 }
jnxWxSysStatsPktsPtFilter OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of packets that passed through the WX Compression Engine
due to a manually configured filter (such as an application
filter), since the system was started."
::= { jnxWxSysStats 9 }
jnxWxSysStatsBytesOfPt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of bytes that passed through the WX Compression Engine
due to device buffer overflow, since the system was started."
::= { jnxWxSysStats 10 }
jnxWxSysStatsPktsOfPt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of packets that passed through the WX Compression Engine
due to device buffer overflow, since the system was started."
::= { jnxWxSysStats 11 }
-- Peak stats
jnxWxSysStatsBytesTpIn OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of bytes into the WX Compression Engine at the peak
five-second interval of data input, since the system was started."
::= { jnxWxSysStats 12 }
jnxWxSysStatsPktsTpIn OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets into the WX Compression Engine at the peak
five-second interval of data input, since the system was started."
::= { jnxWxSysStats 13 }
jnxWxSysStatsBytesTpOut OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of bytes out of the WX Compression Engine at the peak
five-second interval of data input, since the system was started."
::= { jnxWxSysStats 14 }
jnxWxSysStatsPktsTpOut OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets out of the WX Compression Engine at the peak
five-second interval of data input, since the system was started."
::= { jnxWxSysStats 15 }
jnxWxSysStatsBytesTpPt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of bytes that passed through the WX Compression Engine
at the peak five-second interval of data input, since the system
was started."
::= { jnxWxSysStats 16 }
jnxWxSysStatsPktsTpPt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets that passed through the WX Compression Engine
at the peak five-second interval of data input, since the system
was started."
::= { jnxWxSysStats 17 }
jnxWxSysStatsPeakRdn OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum data reduction rate for a five second interval
in the last minute.
The value returned is (percentage * 1000). Applications should
divide the returned value by 1000."
::= { jnxWxSysStats 18 }
-- Througput stats
jnxWxSysStatsThruputIn OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average throughput of incoming data in Kbps since the
system was started."
::= { jnxWxSysStats 19 }
jnxWxSysStatsThruputOut OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average throughput of outgoing data in Kbps since the
system was started."
::= { jnxWxSysStats 20 }
-- Compression stats
jnxWxSysStatsBytesInRe OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of bytes that entered the WX Compression Engine
since the system was started."
::= { jnxWxSysStats 21 }
jnxWxSysStatsBytesOutRe OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of bytes that exited the WX Compression Engine
after reduction since the system was started."
::= { jnxWxSysStats 22 }
jnxWxSysStatsPktsInRe OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of packets that entered the WX Compression Engine
since the system was started."
::= { jnxWxSysStats 23 }
jnxWxSysStatsPktsOutRe OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of packets that exited the WX Compression Engine
after reduction since the system was started."
::= { jnxWxSysStats 24 }
jnxWxSysStatsPktSizeIn1 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { jnxWxSysStats 25 }
jnxWxSysStatsPktSizeIn2 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { jnxWxSysStats 26 }
jnxWxSysStatsPktSizeIn3 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { jnxWxSysStats 27 }
jnxWxSysStatsPktSizeIn4 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { jnxWxSysStats 28 }
jnxWxSysStatsPktSizeIn5 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { jnxWxSysStats 29 }
jnxWxSysStatsPktSizeIn6 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { jnxWxSysStats 30 }
jnxWxSysStatsPktSizeOut1 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { jnxWxSysStats 31 }
jnxWxSysStatsPktSizeOut2 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { jnxWxSysStats 32 }
jnxWxSysStatsPktSizeOut3 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { jnxWxSysStats 33 }
jnxWxSysStatsPktSizeOut4 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { jnxWxSysStats 34 }
jnxWxSysStatsPktSizeOut5 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { jnxWxSysStats 35 }
jnxWxSysStatsPktSizeOut6 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { jnxWxSysStats 36 }
----------------------------------------------------------------------
-- Information maintained by a Compressor about each Decompressor it has
-- a session with.
jnxWxAsm OBJECT-IDENTITY
STATUS current
DESCRIPTION "
Information maintained by a Compressor for each Decompressor it has
a session with."
::= { jnxWxObjs 5 }
jnxWxAsmTable OBJECT-TYPE
SYNTAX SEQUENCE OF JuniperWxAsmEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"List of Decompressors the Compressor has sessions with."
::= { jnxWxAsm 1 }
jnxWxAsmEntry OBJECT-TYPE
SYNTAX JuniperWxAsmEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in jnxWxAsmTable."
INDEX { jnxWxAsmIndex }
::= { jnxWxAsmTable 1 }
JuniperWxAsmEntry ::=
SEQUENCE
{
jnxWxAsmIndex
Integer32,
jnxWxAsmIpAddress
IpAddress
}
jnxWxAsmIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This row's number, with range (1..jnxWxStatsAsmCount)."
::= { jnxWxAsmEntry 1 }
jnxWxAsmIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the Decompressor."
::= { jnxWxAsmEntry 2 }
----------------------------------------------------------------------
-- Stats maintained by a Compressor for each Decompressor it has
-- a session with.
jnxWxAsmStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF JuniperWxAsmStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Statistics maintained by a Compressor for each Decompressor it has
a session with."
::= { jnxWxAsm 2 }
jnxWxAsmStatsEntry OBJECT-TYPE
SYNTAX JuniperWxAsmStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in jnxWxAsmStatsTable."
AUGMENTS { jnxWxAsmEntry }
::= { jnxWxAsmStatsTable 1 }
JuniperWxAsmStatsEntry ::=
SEQUENCE
{
jnxWxAsmStatsPktsIn
Counter64,
jnxWxAsmStatsPktsOut
Counter64,
jnxWxAsmStatsBytesIn
Counter64,
jnxWxAsmStatsBytesOut
Counter64
}
jnxWxAsmStatsPktsIn OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets into this WX, since
the system was started, that were identified for
reduction and addressed to the WX whose IP address
is in the row in jnxWxAsmTable that matches
this row."
::= { jnxWxAsmStatsEntry 1 }
jnxWxAsmStatsPktsOut OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets out of this WX, since
the system was started, that were identified for
reduction and addressed to the WX whose IP address
is in the row in jnxWxAsmTable that matches
this row."
::= { jnxWxAsmStatsEntry 2 }
jnxWxAsmStatsBytesIn OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of bytes into this WX, since
the system was started, that were identified for
reduction and addressed to the WX whose IP address
is in the row in jnxWxAsmTable that matches
this row."
::= { jnxWxAsmStatsEntry 3 }
jnxWxAsmStatsBytesOut OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of bytes out of this WX, since
the system was started, that were identified for
reduction and addressed to the WX whose IP address
is in the row in jnxWxAsmTable that matches
this row."
::= { jnxWxAsmStatsEntry 4 }
----------------------------------------------------------------------
-- Virtual Endpoint definitions configured on the compressor
jnxWxVirtEndptTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxWxVirtEndptEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Virtual Endpoints defined in this WX"
::= { jnxWxAsm 3 }
jnxWxVirtEndptEntry OBJECT-TYPE
SYNTAX JnxWxVirtEndptEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in jnxWxVirtEndptTable."
INDEX { jnxWxVirtEndptIndex }
::= { jnxWxVirtEndptTable 1 }
JnxWxVirtEndptEntry ::=
SEQUENCE
{
jnxWxVirtEndptIndex
Integer32,
jnxWxVirtEndptName
TcAppName,
jnxWxVirtEndptSubnetCount
Integer32
}
jnxWxVirtEndptIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row's number, with range (1..jnxWxStatsVirtEndptCount)"
::= { jnxWxVirtEndptEntry 1 }
jnxWxVirtEndptName OBJECT-TYPE
SYNTAX TcAppName
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the configured virtual endpoint"
::= { jnxWxVirtEndptEntry 2 }
jnxWxVirtEndptSubnetCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of subnets associated with this
virtual endpoint"
::= { jnxWxVirtEndptEntry 3 }
----------------------------------------------------------------------
-- Application information maintained by a Compressor
jnxWxApp OBJECT-IDENTITY
STATUS current
DESCRIPTION "
Information maintained by a Compressor for each application
that is monitored."
::= { jnxWxObjs 6 }
jnxWxAppTable OBJECT-TYPE
SYNTAX SEQUENCE OF JuniperWxAppEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"List of applications currently monitored."
::= { jnxWxApp 1 }
jnxWxAppEntry OBJECT-TYPE
SYNTAX JuniperWxAppEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in jnxWxAppTable."
INDEX { jnxWxAppIndex }
::= { jnxWxAppTable 1 }
JuniperWxAppEntry ::=
SEQUENCE
{
jnxWxAppIndex
Integer32,
jnxWxAppAppName
TcAppName
}
jnxWxAppIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This row's number, with range (1..jnxWxStatsAppCount)."
::= { jnxWxAppEntry 1 }
jnxWxAppAppName OBJECT-TYPE
SYNTAX TcAppName
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the application from which the data was
received (e.g., FTP, HTTP, Lotus Notes)."
::= { jnxWxAppEntry 2 }
----------------------------------------------------------------------
-- Application stats maintained by a Compressor for each Decompressor
-- it has a session with.
jnxWxAppStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF JuniperWxAppStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Statistics maintained by a Compressor for each application
that is monitored."
::= { jnxWxApp 2 }
jnxWxAppStatsEntry OBJECT-TYPE
SYNTAX JuniperWxAppStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in jnxWxAppStatsTable.
Note that the indices are from jnxWxAsmTable and
jnxWxAppTable. For each Decompressor this compressor has
a session with (indexed by jnxWxAsmIndex), statistics
are maintained for each application that is monitored
(indexed by jnxWxAppIndex)."
INDEX { jnxWxAsmIndex, jnxWxAppIndex }
::= { jnxWxAppStatsTable 1 }
JuniperWxAppStatsEntry ::=
SEQUENCE
{
jnxWxAppStatsBytesIn
Counter64,
jnxWxAppStatsBytesOut
Counter64,
jnxWxAppStatsBytesInPercent
Gauge32,
jnxWxAppStatsAppName
TcAppName,
jnxWxAppStatsAccelBytesIn
Counter64,
jnxWxAppStatsActiveSessionTime
Counter64,
jnxWxAppStatsEstBoostBytes
Counter64,
jnxWxAppStatsBytesOutWxc
Counter64
}
jnxWxAppStatsBytesIn OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of bytes into the WX, since the system
was started, that were identified for reduction,
and addressed to the WX whose IP address is in the
row in jnxWxAsmTable that matches the index
jnxWxAsmIndex, and that was received from the
application whose name is in the row in jnxWxAppTable
that matches the index jnxWxAppIndex."
::= { jnxWxAppStatsEntry 1 }
jnxWxAppStatsBytesOut OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of bytes out of the WX, since the
system was started, that were identified for reduction,
and addressed to the WX whose IP address is in the
row in jnxWxAsmTable that matches the index
jnxWxAsmIndex, and that was received from the
application whose name is in the row in jnxWxAppTable."
::= { jnxWxAppStatsEntry 2 }
jnxWxAppStatsBytesInPercent OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The percentage of the bytes in for this application
over the total bytes into the WX, since the system
was started, that were identified for reduction,
and addressed to the WX whose IP address is in the
row in jnxWxAsmTable that matches the index
jnxWxAsmIndex, and that was received from the
application whose name is in the row in jnxWxAppTable
that matches the index jnxWxAppIndex.
The value returned is (percentage * 1000). Applications should
divide the returned value by 1000."
::= { jnxWxAppStatsEntry 3 }
jnxWxAppStatsAppName OBJECT-TYPE
SYNTAX TcAppName
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the application from which the data was
received (e.g., FTP, HTTP, Lotus Notes).
NOTE: This object is here even though it's also in
jnxWxAppTable. This is for the convenience of network
monitoring tools that require all columns to be from the
same table."
::= { jnxWxAppStatsEntry 4 }
jnxWxAppStatsAccelBytesIn OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { jnxWxAppStatsEntry 5 }
jnxWxAppStatsActiveSessionTime OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { jnxWxAppStatsEntry 6 }
jnxWxAppStatsEstBoostBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { jnxWxAppStatsEntry 7 }
jnxWxAppStatsBytesOutWxc OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { jnxWxAppStatsEntry 8 }
----------------------------------------------------------------------
-- Aggregate application stats (across all Decompressors)
-- maintained by a Compressor. This table augments jnxWxAppTable.
jnxWxAppAggrStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF JuniperWxAppAggrStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Aggregate statistics maintained by a Compressor for each application
that is monitored. These statistics apply to the compressor as a whole
and are summed over all decompressor sessions maintained by the compressor."
::= { jnxWxApp 3 }
jnxWxAppAggrStatsEntry OBJECT-TYPE
SYNTAX JuniperWxAppAggrStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in jnxWxAppAggrStatsTable."
AUGMENTS { jnxWxAppEntry }
::= { jnxWxAppAggrStatsTable 1 }
JuniperWxAppAggrStatsEntry ::=
SEQUENCE
{
jnxWxAppAggrStatsBytesInRe
Counter64,
jnxWxAppAggrStatsBytesOutRe
Counter64,
jnxWxAppAggrStatsBytesInPercent
Gauge32
}
jnxWxAppAggrStatsBytesInRe OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of bytes that entered the WX Compression Engine
for this application since the system was started."
::= { jnxWxAppAggrStatsEntry 1 }
jnxWxAppAggrStatsBytesOutRe OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of bytes that exited the WX Compression Engine
after reduction for this application since the system was started."
::= { jnxWxAppAggrStatsEntry 2 }
jnxWxAppAggrStatsBytesInPercent OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The percentage of the bytes in for this application over the
total bytes into the WX Compression Engine.
The value returned is (percentage * 1000). Applications should
divide the returned value by 1000."
::= { jnxWxAppAggrStatsEntry 3 }
----------------------------------------------------------------------
-- WAN stats per application
jnxWxWanStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF JuniperWxWanStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Per application WAN performance statistics"
::= { jnxWxApp 4 }
jnxWxWanStatsEntry OBJECT-TYPE
SYNTAX JuniperWxWanStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in jnxWxWanStatsTable.
Note that the indices are from jnxWxAsmTable and
jnxWxAppTable. For each Decompressor this compressor has
a session with (indexed by jnxWxAsmIndex), statistics
are maintained for each application that is monitored
(indexed by jnxWxAppIndex)."
INDEX { jnxWxAsmIndex, jnxWxAppIndex }
::= { jnxWxWanStatsTable 1 }
JuniperWxWanStatsEntry ::=
SEQUENCE
{
jnxWxWanStatsBytesToWan
Counter64,
jnxWxWanStatsBytesFromWan
Counter64
}
jnxWxWanStatsBytesToWan OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of bytes sent to the wan on a per
application basis"
::= { jnxWxWanStatsEntry 1 }
jnxWxWanStatsBytesFromWan OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of bytes received from the WAN
on a per application basis"
::= { jnxWxWanStatsEntry 2 }
----------------------------------------------------------------------
-- A list of Applications that can be Accelerated
jnxWxAccelAppNameTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxWxAccelAppNameEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"List of applications that can be accelerated by
the WX device."
::= { jnxWxApp 5 }
jnxWxAccelAppNameEntry OBJECT-TYPE
SYNTAX JnxWxAccelAppNameEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in jnxWxAccelAppNameTable. Each row contains
the name of an application that can be accelerated."
INDEX { jnxWxAccelAppIndex }
::= { jnxWxAccelAppNameTable 1 }
JnxWxAccelAppNameEntry ::=
SEQUENCE
{
jnxWxAccelAppIndex
Integer32,
jnxWxAccelAppName
TcAppName
}
jnxWxAccelAppIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This row's number, with range (1..jnxWxStatsAccelAppCount)."
::= { jnxWxAccelAppNameEntry 1 }
jnxWxAccelAppName OBJECT-TYPE
SYNTAX TcAppName
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the application from which the data was
received (e.g., FTP, HTTP, Lotus Notes)."
::= { jnxWxAccelAppNameEntry 2 }
----------------------------------------------------------------------
-- Application Acceleration Statistics. Lists time with and without
-- acceleration in seconds.
jnxWxAccelAppStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxWxAccelAppStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Accelerated application performance statistics. Includes
time with and without acceleration in seconds"
::= { jnxWxApp 6 }
jnxWxAccelAppStatsEntry OBJECT-TYPE
SYNTAX JnxWxAccelAppStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in jnxWxAccelAppStatsTable. Indices are from
jnxWxAsmTable and jnxWxAccelAppNameTable. For each Decompressor
this compressor has a session with (indexed by jnxWxAsmIndex),
statistics are maintained for each application that is
accelereated (indexed by jnxWxAccelAppIndex)"
INDEX { jnxWxAsmIndex, jnxWxAccelAppIndex }
::= { jnxWxAccelAppStatsTable 1 }
JnxWxAccelAppStatsEntry ::=
SEQUENCE
{
jnxWxAccelAppTimeWithAccel
Unsigned32,
jnxWxAccelAppTimeWithoutAccel
Unsigned32
}
jnxWxAccelAppTimeWithAccel OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of seconds required to complete all
transactions with acceleration enabled."
::= { jnxWxAccelAppStatsEntry 3 }
jnxWxAccelAppTimeWithoutAccel OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of seconds that would be required to
complete all transactions if acceleration was disabled."
::= { jnxWxAccelAppStatsEntry 4 }
----------------------------------------------------------------------
-- The burst stats over the past minute.
-- NOTE: jnxWxStatsUpdateTime does not apply to this group.
jnxWxBurstStats OBJECT-IDENTITY
STATUS current
DESCRIPTION "
Sub-tree for WAN Acceleration system statistics."
::= { jnxWxObjs 7 }
jnxWxBurstStatsStartTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The start of the minute in seconds since
midnight (00:00:00), January 1, 1970, UTC
over which the burst stats apply."
::= { jnxWxBurstStats 1 }
jnxWxBurstStatsBpsIn OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Burst bits per second into reduction engine for the past minute."
::= { jnxWxBurstStats 2 }
jnxWxBurstStatsBpsOut OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Burst bits per second out of reduction engine for the past minute."
::= { jnxWxBurstStats 3 }
jnxWxBurstStatsBpsPt OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Burst pass-through bits per second for the past minute."
::= { jnxWxBurstStats 4 }
----------------------------------------------------------------------
-- Information about endpoints being managed by QoS
jnxWxQos OBJECT-IDENTITY
STATUS current
DESCRIPTION "
Information maintained by a Compressor for each QoS class
that is monitored."
::= { jnxWxObjs 10 }
jnxWxQosEndptTable OBJECT-TYPE
SYNTAX SEQUENCE OF JuniperWxQosEndptEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"List of endpoints managed by QoS."
::= { jnxWxQos 1 }
jnxWxQosEndptEntry OBJECT-TYPE
SYNTAX JuniperWxQosEndptEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in jnxWxQosEndptTable."
INDEX { jnxWxQosEndptIndex }
::= { jnxWxQosEndptTable 1 }
JuniperWxQosEndptEntry ::=
SEQUENCE
{
jnxWxQosEndptIndex
Integer32,
jnxWxQosEndptIdentifier
TcQosIdentifier
}
jnxWxQosEndptIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This row's number, with range (1..jnxWxStatsQosEndptCount)."
::= { jnxWxQosEndptEntry 1 }
jnxWxQosEndptIdentifier OBJECT-TYPE
SYNTAX TcQosIdentifier
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of an Decompressor or the name
of a virtual endpoint."
::= { jnxWxQosEndptEntry 2 }
----------------------------------------------------------------------
-- Qos Class information maintained by a Compressor
jnxWxQosClassTable OBJECT-TYPE
SYNTAX SEQUENCE OF JuniperWxQosClassEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"List of QoS classes currently monitored."
::= { jnxWxQos 2 }
jnxWxQosClassEntry OBJECT-TYPE
SYNTAX JuniperWxQosClassEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the jnxWxQosClassTable"
INDEX { jnxWxQosClassIndex }
::= { jnxWxQosClassTable 1 }
JuniperWxQosClassEntry ::=
SEQUENCE
{
jnxWxQosClassIndex
Integer32,
jnxWxQosClassName
TcQosIdentifier
}
jnxWxQosClassIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This row's number, with range (1..jnxWxStatsQosClassCount)."
::= { jnxWxQosClassEntry 1 }
jnxWxQosClassName OBJECT-TYPE
SYNTAX TcQosIdentifier
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the QoS class"
::= { jnxWxQosClassEntry 2 }
----------------------------------------------------------------------
-- Qos performance stats per class
jnxWxQosStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF JuniperWxQosStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Per class QoS performance statistics"
::= { jnxWxQos 3 }
jnxWxQosStatsEntry OBJECT-TYPE
SYNTAX JuniperWxQosStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the jnxWxQosStatsTable. Indexed by
decompressor and the corresponding QoS class.
Statistics are maintained per endpoint
(indexed by jnxWxQosEndptIndex) and per QoS
class associated with the endpoint (indexed
by jnxWxQosClassIndex)"
INDEX { jnxWxQosEndptIndex, jnxWxQosClassIndex }
::= { jnxWxQosStatsTable 1 }
JuniperWxQosStatsEntry ::=
SEQUENCE
{
jnxWxQosStatsBytesIn
Counter64,
jnxWxQosStatsBytesOut
Counter64,
jnxWxQosStatsBytesDropped
Counter64,
jnxWxQosStatsPktsIn
Counter64,
jnxWxQosStatsPktsOut
Counter64,
jnxWxQosStatsPktsDropped
Counter64
}
jnxWxQosStatsBytesIn OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of bytes received from the WAN
on a per class basis"
::= { jnxWxQosStatsEntry 3 }
jnxWxQosStatsBytesOut OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of bytes sent to the WAN on a per
class basis"
::= { jnxWxQosStatsEntry 4 }
jnxWxQosStatsBytesDropped OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of bytes dropped on a per
class basis"
::= { jnxWxQosStatsEntry 5 }
jnxWxQosStatsPktsIn OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of packets received from the WAN
on a per class basis"
::= { jnxWxQosStatsEntry 6 }
jnxWxQosStatsPktsOut OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of packets sent to the wan on a per
class basis"
::= { jnxWxQosStatsEntry 7 }
jnxWxQosStatsPktsDropped OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of packets dropped
on a per class basis"
::= { jnxWxQosStatsEntry 8 }
----------------------------------------------------------------------
-- WAN performance statistics for monitored endpoints
jnxWxWanPerf OBJECT-IDENTITY
STATUS current
DESCRIPTION "
"
::= { jnxWxObjs 14 }
jnxWxWpEndptTable OBJECT-TYPE
SYNTAX SEQUENCE OF JuniperWxWpEndptEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"List of endpoints managed by Multi-path"
::= { jnxWxWanPerf 1 }
jnxWxWpEndptEntry OBJECT-TYPE
SYNTAX JuniperWxWpEndptEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { jnxWxWpEndptIndex }
::= { jnxWxWpEndptTable 1 }
JuniperWxWpEndptEntry ::=
SEQUENCE
{
jnxWxWpEndptIndex
Integer32,
jnxWxWpEndptIp
IpAddress
}
jnxWxWpEndptIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
::= { jnxWxWpEndptEntry 1 }
jnxWxWpEndptIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { jnxWxWpEndptEntry 2 }
----------------------------------------------------------------------
-- Multi-path performance stats per class
jnxWxWpStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF JuniperWxWpStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
::= { jnxWxWanPerf 2 }
jnxWxWpStatsEntry OBJECT-TYPE
SYNTAX JuniperWxWpStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { jnxWxWpEndptIndex }
::= { jnxWxWpStatsTable 1 }
JuniperWxWpStatsEntry ::=
SEQUENCE
{
jnxWxWpStatsLatencyThresh
Unsigned32,
jnxWxWpStatsAvgLatency
Unsigned32,
jnxWxWpStatsLatencyCount
Unsigned32,
jnxWxWpStatsLatencyAboveThresh
Unsigned32,
jnxWxWpStatsLatencyAboveThreshCount
Unsigned32,
jnxWxWpStatsLossPercent
Unsigned32,
jnxWxWpStatsLossCount
Unsigned32,
jnxWxWpStatsEventCount
Unsigned32,
jnxWxWpStatsDiversionCount
Unsigned32,
jnxWxWpStatsReturnCount
Unsigned32,
jnxWxWpStatsLastDown
Unsigned32,
jnxWxWpStatsUnavailableCount
Unsigned32,
jnxWxWpStatsMinuteCount
Unsigned32
}
jnxWxWpStatsLatencyThresh OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { jnxWxWpStatsEntry 3 }
jnxWxWpStatsAvgLatency OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { jnxWxWpStatsEntry 4 }
jnxWxWpStatsLatencyCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { jnxWxWpStatsEntry 5 }
jnxWxWpStatsLatencyAboveThresh OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { jnxWxWpStatsEntry 6 }
jnxWxWpStatsLatencyAboveThreshCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { jnxWxWpStatsEntry 7 }
jnxWxWpStatsLossPercent OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { jnxWxWpStatsEntry 8 }
jnxWxWpStatsLossCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { jnxWxWpStatsEntry 9 }
jnxWxWpStatsEventCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { jnxWxWpStatsEntry 10 }
jnxWxWpStatsDiversionCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { jnxWxWpStatsEntry 11 }
jnxWxWpStatsReturnCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { jnxWxWpStatsEntry 12 }
jnxWxWpStatsLastDown OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { jnxWxWpStatsEntry 13 }
jnxWxWpStatsUnavailableCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { jnxWxWpStatsEntry 14 }
jnxWxWpStatsMinuteCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { jnxWxWpStatsEntry 15 }
----------------------------------------------------------------------
-- Events
jnxWxEventObjs OBJECT-IDENTITY
STATUS current
DESCRIPTION "
Branch for objects meant only to be sent in event varbinds."
::= { jnxWxEvents 1 }
jnxWxEventEvents OBJECT-IDENTITY
STATUS current
DESCRIPTION "
Branch for the events themselves."
::= { jnxWxEvents 2 }
jnxWxEventEventsV2 OBJECT-IDENTITY
STATUS current
DESCRIPTION "
Branch for SNMPv2 events. The OIDs for SNMPv2 events should
have a zero as the next-to-last sub-identifier (as specified
in RFC1902)."
::= { jnxWxEventEvents 0 }
-- Objects sent only in events
-- None so far.
-- Event descriptions
jnxWxEventRipAuthFailure NOTIFICATION-TYPE
OBJECTS { jnxWxCommonEventDescr }
STATUS current
DESCRIPTION
"RIP authentication failure"
::= { jnxWxEventEventsV2 1 }
jnxWxEventCompressionBufferOverflow NOTIFICATION-TYPE
OBJECTS { jnxWxCommonEventDescr }
STATUS current
DESCRIPTION
"The compressor's input buffer is approaching full capacity.
This trap is currently unused."
::= { jnxWxEventEventsV2 2 }
jnxWxEventCompressionSessionClosed NOTIFICATION-TYPE
OBJECTS { jnxWxCommonEventDescr }
STATUS current
DESCRIPTION
"The compressor's session to the device described in
jnxWxCommonEventDescr was terminated."
::= { jnxWxEventEventsV2 3 }
jnxWxEventDecompressionSessionClosed NOTIFICATION-TYPE
OBJECTS { jnxWxCommonEventDescr }
STATUS current
DESCRIPTION
"The decompressor's session to the device described in
jnxWxCommonEventDescr was terminated."
::= { jnxWxEventEventsV2 4 }
jnxWxEventCompressionSessionOpened NOTIFICATION-TYPE
OBJECTS { jnxWxCommonEventDescr }
STATUS current
DESCRIPTION
"The compressor's session to the device described in
jnxWxCommonEventDescr was opened."
::= { jnxWxEventEventsV2 5 }
jnxWxEventDecompressionSessionOpened NOTIFICATION-TYPE
OBJECTS { jnxWxCommonEventDescr }
STATUS current
DESCRIPTION
"The decompressor's session to the device described in
jnxWxCommonEventDescr was opened."
::= { jnxWxEventEventsV2 6 }
jnxWxEventPrimaryRegServerUnreachable NOTIFICATION-TYPE
OBJECTS { jnxWxCommonEventDescr }
STATUS current
DESCRIPTION
"The primary registration server is
currently unreachable."
::= { jnxWxEventEventsV2 7 }
jnxWxEventSecondaryRegServerUnreachable NOTIFICATION-TYPE
OBJECTS { jnxWxCommonEventDescr }
STATUS current
DESCRIPTION
"The secondary registration server is
currently unreachable."
::= { jnxWxEventEventsV2 8 }
jnxWxEventMultiNodeMasterUp NOTIFICATION-TYPE
OBJECTS { jnxWxCommonEventDescr }
STATUS current
DESCRIPTION
"The system designated as the 'master' of a multi-node
came up. This notification is generated by the
system that's designated as the 'master' of the
multi-node.
Note that the corresponding Down notification is
generated by the designated 'master-backup' of the
same multi-node.
This trap is currently unused."
::= { jnxWxEventEventsV2 9 }
jnxWxEventMultiNodeMasterDown NOTIFICATION-TYPE
OBJECTS { jnxWxCommonEventDescr }
STATUS current
DESCRIPTION
"The system designated as the 'master' of a multi-node
is currently down. This notification is generated by the
system that's designated as the 'master-backup' of the
same multi-node.
Note that the corresponding Up notification is
generated by the designated 'master' of the same
multi-node.
This trap is currently unused."
::= { jnxWxEventEventsV2 10 }
jnxWxEventMultiNodeLastUp NOTIFICATION-TYPE
OBJECTS { jnxWxCommonEventDescr }
STATUS current
DESCRIPTION
"The system designated as the 'last-node' of a multi-node
came up. This notification is generated by the
system that's designated as the 'last-node' of the
multi-node.
Note that the corresponding Down notification is
generated by the designated 'master' of the
same multi-node.
This trap is currently unused."
::= { jnxWxEventEventsV2 11 }
jnxWxEventMultiNodeLastDown NOTIFICATION-TYPE
OBJECTS { jnxWxCommonEventDescr }
STATUS current
DESCRIPTION
"The system designated as the 'last-node' of a multi-node
is currently down. This notification is generated by the
system that's designated as the 'master' of the
same multi-node.
Note that the corresponding Up notification is
generated by the designated 'last-node' of the same
multi-node.
This trap is currently unused."
::= { jnxWxEventEventsV2 12 }
jnxWxEventPrimaryDownBackupEngaged NOTIFICATION-TYPE
OBJECTS { jnxWxCommonEventDescr }
STATUS current
DESCRIPTION
"The system designated as the 'primary' is currently
unreachable. This notification is generated by the
system that's designated as the 'backup' device.
The backup device is engaged for the primary device."
::= { jnxWxEventEventsV2 13 }
jnxWxEventPrimaryDownBackupEngageFailed NOTIFICATION-TYPE
OBJECTS { jnxWxCommonEventDescr }
STATUS current
DESCRIPTION
"The system designated as the 'primary' is currently
unreachable. This notification is generated by the
system that's designated as the 'backup' device.
The backup device failed to engage for the primary device."
::= { jnxWxEventEventsV2 14 }
jnxWxEventPrimaryUpBackupDisengaged NOTIFICATION-TYPE
OBJECTS { jnxWxCommonEventDescr }
STATUS current
DESCRIPTION
"The system designated as the 'primary' is currently
reachable. This notification is generated by the
system that's designated as the 'backup' device.
The backup device has disengaged itself."
::= { jnxWxEventEventsV2 15 }
jnxWxEventMultiPathStatusChange NOTIFICATION-TYPE
OBJECTS { jnxWxCommonEventDescr }
STATUS current
DESCRIPTION
"The status of the primary or secondary path to another
multi-path enabled system changed. The path became inactive
or failed after previously being active or vice versa.
This might have caused traffic designated to flow over
this path to be switched from or to this path."
::= { jnxWxEventEventsV2 16 }
jnxWxEventDiskFailure NOTIFICATION-TYPE
OBJECTS { jnxWxCommonEventDescr }
STATUS current
DESCRIPTION
"A hard disk failed on the system. The system was rebooted,
and will now operate without the downed disk, at a degraded
performance. Dictionary accumulated until this point was lost."
::= { jnxWxEventEventsV2 17 }
jnxWxEventWanPerfStatusChange NOTIFICATION-TYPE
OBJECTS { jnxWxCommonEventDescr }
STATUS current
DESCRIPTION
"The status of the Path on which WAN Performance Monitoring is
enabled has changed. The performance of the path has changed either
from acceptable to unacceptable or vice versa."
::= { jnxWxEventEventsV2 18 }
jnxWxEventDCQAboveHiWatermark NOTIFICATION-TYPE
OBJECTS { jnxWxCommonEventDescr }
STATUS current
DESCRIPTION
"The decompression queue has reached the high watermark."
::= { jnxWxEventEventsV2 19 }
jnxWxEventDCQBelowHiWatermark NOTIFICATION-TYPE
OBJECTS { jnxWxCommonEventDescr }
STATUS current
DESCRIPTION
"The decompression queue has fallen below the high watermark."
::= { jnxWxEventEventsV2 20 }
jnxWxEventPerformanceThreshCrossed NOTIFICATION-TYPE
OBJECTS { jnxWxCommonEventDescr }
STATUS current
DESCRIPTION
"The threshold for a configured perfromance event has been
crossed. This notification indicates that some system parameter
being measured has reached a critical value."
::= { jnxWxEventEventsV2 21 }
jnxWxEventClientLinkDown NOTIFICATION-TYPE
OBJECTS { jnxWxCommonEventDescr }
STATUS current
DESCRIPTION
"Link to the Client went down."
::= { jnxWxEventEventsV2 22 }
jnxWxEventClientLinkUp NOTIFICATION-TYPE
OBJECTS { jnxWxCommonEventDescr }
STATUS current
DESCRIPTION
"Link to the client came up."
::= { jnxWxEventEventsV2 23 }
END
Reference in New Issue View Git Blame Copy Permalink