mibs/MIBS/junos/RADIUS-ACC-CLIENT-MIB
2023-12-05 12:25:34 +01:00

647 lines
24 KiB
Plaintext

RADIUS-ACC-CLIENT-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, OBJECT-IDENTITY,
Counter32, Integer32, Gauge32,
IpAddress, TimeTicks, mib-2 FROM SNMPv2-SMI
SnmpAdminString FROM SNMP-FRAMEWORK-MIB
InetAddressType, InetAddress,
InetPortNumber FROM INET-ADDRESS-MIB
MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF;
radiusAccClientMIB MODULE-IDENTITY
LAST-UPDATED "200608210000Z" -- 21 August 2006
ORGANIZATION "IETF RADIUS Extensions Working Group."
CONTACT-INFO
" Bernard Aboba
Microsoft
One Microsoft Way
Redmond, WA 98052
US
Phone: +1 425 936 6605
EMail: bernarda@microsoft.com"
DESCRIPTION
"The MIB module for entities implementing the client
side of the Remote Authentication Dial-In User Service
(RADIUS) accounting protocol. Copyright (C) The
Internet Society (2006). This version of this MIB
module is part of RFC 4670; see the RFC itself for
full legal notices."
REVISION "200608210000Z" -- 21 August 2006
DESCRIPTION
"Revised version as published in RFC 4670.
This version obsoletes that of RFC 2620 by
deprecating the MIB table containing IPv4-only
address formats and defining a new table to add support
for version-neutral IP address formats. The remaining
MIB objects from RFC 2620 are carried forward into this
version."
REVISION "199906110000Z" -- 11 Jun 1999
DESCRIPTION "Initial version as published in RFC 2620."
::= { radiusAccounting 2 }
radiusMIB OBJECT-IDENTITY
STATUS current
DESCRIPTION
"The OID assigned to RADIUS MIB work by the IANA."
::= { mib-2 67 }
radiusAccounting OBJECT IDENTIFIER ::= {radiusMIB 2}
radiusAccClientMIBObjects OBJECT IDENTIFIER
::= { radiusAccClientMIB 1 }
radiusAccClient OBJECT IDENTIFIER
::= { radiusAccClientMIBObjects 1 }
radiusAccClientInvalidServerAddresses OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS Accounting-Response packets
received from unknown addresses."
::= { radiusAccClient 1 }
radiusAccClientIdentifier OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The NAS-Identifier of the RADIUS accounting client.
This is not necessarily the same as sysName in MIB
II."
REFERENCE "RFC 2865 section 5.32"
::= { radiusAccClient 2 }
radiusAccServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF RadiusAccServerEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"The (conceptual) table listing the RADIUS accounting
servers with which the client shares a secret."
::= { radiusAccClient 3 }
radiusAccServerEntry OBJECT-TYPE
SYNTAX RadiusAccServerEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"An entry (conceptual row) representing a RADIUS
accounting server with which the client shares a
secret."
INDEX { radiusAccServerIndex }
::= { radiusAccServerTable 1 }
RadiusAccServerEntry ::= SEQUENCE {
radiusAccServerIndex Integer32,
radiusAccServerAddress IpAddress,
radiusAccClientServerPortNumber Integer32,
radiusAccClientRoundTripTime TimeTicks,
radiusAccClientRequests Counter32,
radiusAccClientRetransmissions Counter32,
radiusAccClientResponses Counter32,
radiusAccClientMalformedResponses Counter32,
radiusAccClientBadAuthenticators Counter32,
radiusAccClientPendingRequests Gauge32,
radiusAccClientTimeouts Counter32,
radiusAccClientUnknownTypes Counter32,
radiusAccClientPacketsDropped Counter32
}
radiusAccServerIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"A number uniquely identifying each RADIUS
Accounting server with which this client
communicates."
::= { radiusAccServerEntry 1 }
radiusAccServerAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The IP address of the RADIUS accounting server
referred to in this table entry."
::= { radiusAccServerEntry 2 }
radiusAccClientServerPortNumber OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The UDP port the client is using to send requests to
this server."
REFERENCE "RFC 2866 section 3"
::= { radiusAccServerEntry 3 }
radiusAccClientRoundTripTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The time interval between the most recent
Accounting-Response and the Accounting-Request that
matched it from this RADIUS accounting server."
REFERENCE "RFC 2866 section 2"
::= { radiusAccServerEntry 4 }
-- Request/Response statistics
--
-- Requests = Responses + PendingRequests + ClientTimeouts
--
-- Responses - MalformedResponses - BadAuthenticators -
-- UnknownTypes - PacketsDropped = Successfully received
radiusAccClientRequests OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of RADIUS Accounting-Request packets
sent. This does not include retransmissions."
REFERENCE "RFC 2866 section 4.1"
::= { radiusAccServerEntry 5 }
radiusAccClientRetransmissions OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of RADIUS Accounting-Request packets
retransmitted to this RADIUS accounting server.
Retransmissions include retries where the
Identifier and Acct-Delay have been updated, as
well as those in which they remain the same."
REFERENCE "RFC 2866 section 2"
::= { radiusAccServerEntry 6 }
radiusAccClientResponses OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of RADIUS packets received on the
accounting port from this server."
REFERENCE "RFC 2866 section 4.2"
::= { radiusAccServerEntry 7 }
radiusAccClientMalformedResponses OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of malformed RADIUS Accounting-Response
packets received from this server. Malformed packets
include packets with an invalid length. Bad
authenticators and unknown types are not included as
malformed accounting responses."
REFERENCE "RFC 2866 section 3"
::= { radiusAccServerEntry 8 }
radiusAccClientBadAuthenticators OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of RADIUS Accounting-Response
packets that contained invalid authenticators
received from this server."
REFERENCE "RFC 2866 section 3"
::= { radiusAccServerEntry 9 }
radiusAccClientPendingRequests OBJECT-TYPE
SYNTAX Gauge32
UNITS "packets"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of RADIUS Accounting-Request packets
sent to this server that have not yet timed out or
received a response. This variable is incremented
when an Accounting-Request is sent and decremented
due to receipt of an Accounting-Response, a timeout,
or a retransmission."
REFERENCE "RFC 2866 section 2"
::= { radiusAccServerEntry 10 }
radiusAccClientTimeouts OBJECT-TYPE
SYNTAX Counter32
UNITS "timeouts"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of accounting timeouts to this server.
After a timeout, the client may retry to the same
server, send to a different server, or give up.
A retry to the same server is counted as a
retransmit as well as a timeout. A send to a different
server is counted as an Accounting-Request as well as
a timeout."
REFERENCE "RFC 2866 section 2"
::= { radiusAccServerEntry 11 }
radiusAccClientUnknownTypes OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of RADIUS packets of unknown type that
were received from this server on the accounting port."
REFERENCE "RFC 2866 section 4"
::= { radiusAccServerEntry 12 }
radiusAccClientPacketsDropped OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of RADIUS packets that were received from
this server on the accounting port and dropped for some
other reason."
::= { radiusAccServerEntry 13 }
-- New MIB objects added in this revision
radiusAccServerExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF RadiusAccServerExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the RADIUS accounting
servers with which the client shares a secret."
::= { radiusAccClient 4 }
radiusAccServerExtEntry OBJECT-TYPE
SYNTAX RadiusAccServerExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) representing a RADIUS
accounting server with which the client shares a
secret."
INDEX { radiusAccServerExtIndex }
::= { radiusAccServerExtTable 1 }
RadiusAccServerExtEntry ::= SEQUENCE {
radiusAccServerExtIndex Integer32,
radiusAccServerInetAddressType InetAddressType,
radiusAccServerInetAddress InetAddress,
radiusAccClientServerInetPortNumber InetPortNumber,
radiusAccClientExtRoundTripTime TimeTicks,
radiusAccClientExtRequests Counter32,
radiusAccClientExtRetransmissions Counter32,
radiusAccClientExtResponses Counter32,
radiusAccClientExtMalformedResponses Counter32,
radiusAccClientExtBadAuthenticators Counter32,
radiusAccClientExtPendingRequests Gauge32,
radiusAccClientExtTimeouts Counter32,
radiusAccClientExtUnknownTypes Counter32,
radiusAccClientExtPacketsDropped Counter32,
radiusAccClientCounterDiscontinuity TimeTicks
}
radiusAccServerExtIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A number uniquely identifying each RADIUS
Accounting server with which this client
communicates."
::= { radiusAccServerExtEntry 1 }
radiusAccServerInetAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of address format used for the
radiusAccServerInetAddress object."
::= { radiusAccServerExtEntry 2 }
radiusAccServerInetAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the RADIUS accounting
server referred to in this table entry, using
the version-neutral IP address format."
::= { radiusAccServerExtEntry 3 }
radiusAccClientServerInetPortNumber OBJECT-TYPE
SYNTAX InetPortNumber ( 1..65535 )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The UDP port the client is using to send requests
to this accounting server. The value zero (0) is
invalid."
REFERENCE "RFC 2866 section 3"
::= { radiusAccServerExtEntry 4 }
radiusAccClientExtRoundTripTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time interval between the most recent
Accounting-Response and the Accounting-Request that
matched it from this RADIUS accounting server."
REFERENCE "RFC 2866 section 2"
::= { radiusAccServerExtEntry 5 }
-- Request/Response statistics
--
-- Requests = Responses + PendingRequests + ClientTimeouts
--
-- Responses - MalformedResponses - BadAuthenticators -
-- UnknownTypes - PacketsDropped = Successfully received
radiusAccClientExtRequests OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS Accounting-Request packets
sent. This does not include retransmissions.
This counter may experience a discontinuity when the
RADIUS Accounting Client module within the managed
entity is reinitialized, as indicated by the current
value of radiusAccClientCounterDiscontinuity."
REFERENCE "RFC 2866 section 4.1"
::= { radiusAccServerExtEntry 6 }
radiusAccClientExtRetransmissions OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS Accounting-Request packets
retransmitted to this RADIUS accounting server.
Retransmissions include retries where the
Identifier and Acct-Delay have been updated, as
well as those in which they remain the same.
This counter may experience a discontinuity when the
RADIUS Accounting Client module within the managed
entity is reinitialized, as indicated by the current
value of radiusAccClientCounterDiscontinuity."
REFERENCE "RFC 2866 section 2"
::= { radiusAccServerExtEntry 7 }
radiusAccClientExtResponses OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS packets received on the
accounting port from this server. This counter
may experience a discontinuity when the RADIUS
Accounting Client module within the managed entity is
reinitialized, as indicated by the current value of
radiusAccClientCounterDiscontinuity."
REFERENCE "RFC 2866 section 4.2"
::= { radiusAccServerExtEntry 8 }
radiusAccClientExtMalformedResponses OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of malformed RADIUS Accounting-Response
packets received from this server. Malformed packets
include packets with an invalid length. Bad
authenticators and unknown types are not included as
malformed accounting responses. This counter may
experience a discontinuity when the RADIUS Accounting
Client module within the managed entity is
reinitialized, as indicated by the current
value of radiusAccClientCounterDiscontinuity."
REFERENCE "RFC 2866 section 3"
::= { radiusAccServerExtEntry 9 }
radiusAccClientExtBadAuthenticators OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS Accounting-Response
packets that contained invalid authenticators
received from this server. This counter may
experience a discontinuity when the RADIUS
Accounting Client module within the managed
entity is reinitialized, as indicated by the
current value of
radiusAccClientCounterDiscontinuity."
REFERENCE "RFC 2866 section 3"
::= { radiusAccServerExtEntry 10 }
radiusAccClientExtPendingRequests OBJECT-TYPE
SYNTAX Gauge32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS Accounting-Request packets
sent to this server that have not yet timed out or
received a response. This variable is incremented
when an Accounting-Request is sent and decremented
due to receipt of an Accounting-Response, a timeout,
or a retransmission. This counter may experience a
discontinuity when the RADIUS Accounting Client module
within the managed entity is reinitialized, as
indicated by the current value of
radiusAccClientCounterDiscontinuity."
REFERENCE "RFC 2866 section 2"
::= { radiusAccServerExtEntry 11 }
radiusAccClientExtTimeouts OBJECT-TYPE
SYNTAX Counter32
UNITS "timeouts"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of accounting timeouts to this server.
After a timeout, the client may retry to the same
server, send to a different server, or give up.
A retry to the same server is counted as a
retransmit as well as a timeout. A send to a different
server is counted as an Accounting-Request as well as
a timeout. This counter may experience a discontinuity
when the RADIUS Accounting Client module within the
managed entity is reinitialized, as indicated by the
current value of radiusAccClientCounterDiscontinuity."
REFERENCE "RFC 2866 section 2"
::= { radiusAccServerExtEntry 12 }
radiusAccClientExtUnknownTypes OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS packets of unknown type that
were received from this server on the accounting port.
This counter may experience a discontinuity when the
RADIUS Accounting Client module within the managed
entity is reinitialized, as indicated by the current
value of radiusAccClientCounterDiscontinuity."
REFERENCE "RFC 2866 section 4"
::= { radiusAccServerExtEntry 13 }
radiusAccClientExtPacketsDropped OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS packets that were received from
this server on the accounting port and dropped for some
other reason. This counter may experience a
discontinuity when the RADIUS Accounting Client module
within the managed entity is reinitialized, as indicated
by the current value of
radiusAccClientCounterDiscontinuity."
::= { radiusAccServerExtEntry 14 }
radiusAccClientCounterDiscontinuity OBJECT-TYPE
SYNTAX TimeTicks
UNITS "centiseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of centiseconds since the last
discontinuity in the RADIUS Accounting Client
counters. A discontinuity may be the result of a
reinitialization of the RADIUS Accounting Client
module within the managed entity."
::= { radiusAccServerExtEntry 15 }
-- conformance information
radiusAccClientMIBConformance OBJECT IDENTIFIER
::= { radiusAccClientMIB 2 }
radiusAccClientMIBCompliances OBJECT IDENTIFIER
::= { radiusAccClientMIBConformance 1 }
radiusAccClientMIBGroups OBJECT IDENTIFIER
::= { radiusAccClientMIBConformance 2 }
-- units of conformance
radiusAccClientMIBCompliance MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for accounting clients
implementing the RADIUS Accounting Client MIB.
Implementation of this module is for IPv4-only
entities, or for backwards compatibility use with
entities that support both IPv4 and IPv6."
MODULE -- this module
MANDATORY-GROUPS { radiusAccClientMIBGroup }
::= { radiusAccClientMIBCompliances 1 }
radiusAccClientExtMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for accounting
clients implementing the RADIUS Accounting
Client IPv6 Extensions MIB. Implementation of
this module is for entities that support IPv6,
or support IPv4 and IPv6."
MODULE -- this module
MANDATORY-GROUPS { radiusAccClientExtMIBGroup }
OBJECT radiusAccServerInetAddressType
SYNTAX InetAddressType { ipv4(1), ipv6(2) }
DESCRIPTION
"An implementation is only required to support
IPv4 and globally unique IPv6 addresses."
OBJECT radiusAccServerInetAddress
SYNTAX InetAddress ( SIZE (4|16) )
DESCRIPTION
"An implementation is only required to support
IPv4 and globally unique IPv6 addresses."
::= { radiusAccClientMIBCompliances 2 }
-- units of conformance
radiusAccClientMIBGroup OBJECT-GROUP
OBJECTS { radiusAccClientIdentifier,
radiusAccClientInvalidServerAddresses,
radiusAccServerAddress,
radiusAccClientServerPortNumber,
radiusAccClientRoundTripTime,
radiusAccClientRequests,
radiusAccClientRetransmissions,
radiusAccClientResponses,
radiusAccClientMalformedResponses,
radiusAccClientBadAuthenticators,
radiusAccClientPendingRequests,
radiusAccClientTimeouts,
radiusAccClientUnknownTypes,
radiusAccClientPacketsDropped
}
STATUS deprecated
DESCRIPTION
"The basic collection of objects providing management of
RADIUS Accounting Clients."
::= { radiusAccClientMIBGroups 1 }
radiusAccClientExtMIBGroup OBJECT-GROUP
OBJECTS { radiusAccClientIdentifier,
radiusAccClientInvalidServerAddresses,
radiusAccServerInetAddressType,
radiusAccServerInetAddress,
radiusAccClientServerInetPortNumber,
radiusAccClientExtRoundTripTime,
radiusAccClientExtRequests,
radiusAccClientExtRetransmissions,
radiusAccClientExtResponses,
radiusAccClientExtMalformedResponses,
radiusAccClientExtBadAuthenticators,
radiusAccClientExtPendingRequests,
radiusAccClientExtTimeouts,
radiusAccClientExtUnknownTypes,
radiusAccClientExtPacketsDropped,
radiusAccClientCounterDiscontinuity
}
STATUS current
DESCRIPTION
"The basic collection of objects providing management of
RADIUS Accounting Clients."
::= { radiusAccClientMIBGroups 2 }
END