294 lines
11 KiB
Plaintext
294 lines
11 KiB
Plaintext
VPLS-BGP-DRAFT-01-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE,
|
|
Unsigned32, transmission
|
|
FROM SNMPv2-SMI -- RFC2578
|
|
|
|
OBJECT-GROUP
|
|
FROM SNMPv2-CONF -- RFC2580
|
|
|
|
RowStatus, StorageType, TEXTUAL-CONVENTION
|
|
FROM SNMPv2-TC -- RFC2579
|
|
|
|
SnmpAdminString
|
|
FROM SNMP-FRAMEWORK-MIB -- RFC3411
|
|
|
|
jnxExperiment
|
|
FROM JUNIPER-SMI
|
|
|
|
jnxVplsConfigIndex, jnxVplsPwBindIndex
|
|
FROM VPLS-GENERIC-DRAFT-01-MIB;
|
|
|
|
jnxVplsBgpDraft01MIB MODULE-IDENTITY
|
|
LAST-UPDATED "200612061200Z" -- 06 Dec 2006 12:00:00 GMT
|
|
ORGANIZATION "Layer 2 Virtual Private Networks (L2VPN)
|
|
Working Group"
|
|
CONTACT-INFO
|
|
"
|
|
V. J. Shah
|
|
Email: vshah@juniper.net
|
|
|
|
The L2VPN Working Group (email distribution l2vpn@ietf.org,
|
|
http://www.ietf.org/html.charters/l2vpn-charter.html)
|
|
"
|
|
DESCRIPTION
|
|
"Copyright (C) The IETF Trust (2010). The initial
|
|
version of this MIB module was published in RFC XXXX.
|
|
-- RFC Editor: Please replace XXXX with RFC number & remove
|
|
-- this note.
|
|
|
|
For full legal notices see the RFC itself or see:
|
|
http://www.ietf.org/copyrights/ianamib.html
|
|
|
|
This MIB module contains managed object definitions for
|
|
BGP signalled Virtual Private LAN Services as in
|
|
[RFC4761]
|
|
|
|
This MIB module enables the use of any underlying PseudoWire
|
|
network. "
|
|
|
|
-- Revision history.
|
|
REVISION
|
|
"200612061200Z" -- 06 Dec 2006 12:00:00 GMT
|
|
DESCRIPTION "Initial version published as part of RFC YYYY."
|
|
-- RFC Editor: please replace YYYY with IANA assigned value, and
|
|
-- delete this note.
|
|
::= { jnxExperiment 10 }
|
|
-- RFC Editor: please replace XXXX with IANA assigne value, and
|
|
-- delete this note.
|
|
|
|
-- VPLS BGP specific Textual Conventions.
|
|
|
|
-- JnxVplsBgpRouteDistinguisher ::= TEXTUAL-CONVENTION
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Syntax for a route distinguisher. For a complete
|
|
-- definition of a route distinguisher, see [RFC4364].
|
|
-- For more details on use of a route distinguisher
|
|
-- for a VPLS service, see [RFC4761]"
|
|
-- REFERENCE
|
|
-- "[RFC4364]"
|
|
-- SYNTAX OCTET STRING(SIZE (0..256))
|
|
|
|
-- JnxVplsBgpRouteTarget ::= TEXTUAL-CONVENTION
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Syntax for a route target. For a complete
|
|
-- definition of a route target, see [RFC4364]."
|
|
-- REFERENCE
|
|
-- "[RFC4364]"
|
|
-- SYNTAX OCTET STRING(SIZE (0..256))
|
|
|
|
-- Top-level components of this MIB.
|
|
|
|
-- Tables, Scalars
|
|
jnxVplsBgpObjects OBJECT IDENTIFIER
|
|
::= { jnxVplsBgpDraft01MIB 1 }
|
|
-- Conformance
|
|
jnxVplsBgpConformance OBJECT IDENTIFIER
|
|
::= { jnxVplsBgpDraft01MIB 2 }
|
|
|
|
-- Vpls Bgp Config Table
|
|
|
|
jnxVplsBgpConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JnxVplsBgpConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table specifies information for configuring
|
|
and monitoring BGP specific parameters for
|
|
Virtual Private Lan Services(VPLS)."
|
|
::= { jnxVplsBgpObjects 1 }
|
|
|
|
jnxVplsBgpConfigEntry OBJECT-TYPE
|
|
SYNTAX JnxVplsBgpConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in this table represents BGP specific information
|
|
for Virtual Private Lan Service(VPLS) in a packet network.
|
|
It is indexed by jnxVplsConfigIndex, which uniquely
|
|
identifies a single instance of a VPLS service.
|
|
|
|
A row is automatically created when a VPLS service is
|
|
configured using BGP signalling.
|
|
|
|
None of the read-create objects values can be
|
|
changed when jnxVplsRowStatus is in the active(1)
|
|
state. Changes are allowed when the jnxVplsRowStatus
|
|
is in notInService(2) or notReady(3) states only.
|
|
If the operator need to change one of the values
|
|
for an active row the jnxVplsConfigRowStatus should be
|
|
first changed to notInService(2), the objects may
|
|
be changed now, and later to active(1) in order to
|
|
re-initiate the signaling process with the new
|
|
values in effect.
|
|
"
|
|
INDEX { jnxVplsConfigIndex }
|
|
::= { jnxVplsBgpConfigTable 1 }
|
|
|
|
JnxVplsBgpConfigEntry ::=
|
|
SEQUENCE {
|
|
jnxVplsBgpConfigVERangeSize Unsigned32
|
|
}
|
|
|
|
jnxVplsBgpConfigVERangeSize OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the size of the range of VE ids in this
|
|
VPLS service. This number controls the size of the
|
|
label block advertised for this VE by the PE.
|
|
A value of 0 indicates that the range is not
|
|
configured and the PE derives the range value
|
|
from received advertisements from other PEs."
|
|
DEFVAL { 0 }
|
|
::= { jnxVplsBgpConfigEntry 1 }
|
|
|
|
-- Vpls Edge Device (VE) Identifier Table
|
|
|
|
jnxVplsBgpVETable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JnxVplsBgpVEEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table associates VPLS Edge devices to a VPLS service"
|
|
::= { jnxVplsBgpObjects 2 }
|
|
|
|
jnxVplsBgpVEEntry OBJECT-TYPE
|
|
SYNTAX JnxVplsBgpVEEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in this table is created for each VE Id
|
|
configured on a PE for a particular VPLS service
|
|
instance."
|
|
INDEX { jnxVplsConfigIndex, jnxVplsBgpVEId }
|
|
::= { jnxVplsBgpVETable 1 }
|
|
|
|
JnxVplsBgpVEEntry ::=
|
|
SEQUENCE {
|
|
jnxVplsBgpVEId Unsigned32,
|
|
jnxVplsBgpVEName SnmpAdminString,
|
|
jnxVplsBgpVEPreference Unsigned32,
|
|
jnxVplsBgpVERowStatus RowStatus,
|
|
jnxVplsBgpVEStorageType StorageType
|
|
}
|
|
|
|
jnxVplsBgpVEId OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A secondary index identifying a VE within an
|
|
instance of a VPLS service."
|
|
::= { jnxVplsBgpVEEntry 1 }
|
|
|
|
jnxVplsBgpVEName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Descriptive name for the site or u-PE assciated with
|
|
this VE Id."
|
|
DEFVAL { "" }
|
|
::= { jnxVplsBgpVEEntry 2 }
|
|
|
|
jnxVplsBgpVEPreference OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the preference of the VE Id on this PE
|
|
if the site is multi-homed and VE Id is re-used."
|
|
DEFVAL { 0 }
|
|
::= { jnxVplsBgpVEEntry 3 }
|
|
|
|
jnxVplsBgpVERowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable is used to create, modify, and/or
|
|
delete a row in this table. When a row in this
|
|
table is in active(1) state, no objects in that row
|
|
can be modified except jnxVplsBgpSiteRowStatus."
|
|
::= { jnxVplsBgpVEEntry 5 }
|
|
|
|
jnxVplsBgpVEStorageType OBJECT-TYPE
|
|
SYNTAX StorageType
|
|
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates the storage type for this row."
|
|
DEFVAL { volatile }
|
|
::= { jnxVplsBgpVEEntry 6 }
|
|
|
|
-- VPLS BGP PW Binding Table
|
|
|
|
jnxVplsBgpPwBindTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JnxVplsBgpPwBindEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table provides BGP specific information for
|
|
an association between a VPLS service and the
|
|
corresponding Pseudo Wires. A service can have more
|
|
than one Pseudo Wire association. Pseudo Wires are
|
|
defined in the pwTable."
|
|
::= { jnxVplsBgpObjects 3 }
|
|
|
|
jnxVplsBgpPwBindEntry OBJECT-TYPE
|
|
SYNTAX JnxVplsBgpPwBindEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each row represents an association between a
|
|
VPLS instance and one or more Pseudo Wires
|
|
defined in the pwTable. Each index is unique
|
|
in describing an entry in this table. However
|
|
both indexes are required to define the one
|
|
to many association of service to pseudowire.
|
|
|
|
An entry in this table in instantiated only when
|
|
BGP signalling is used to configure VPLS service.
|
|
|
|
Each entry in this table provides BGP specific
|
|
information for the VPlS represented by
|
|
jnxVplsConfigIndex."
|
|
INDEX { jnxVplsConfigIndex, jnxVplsPwBindIndex }
|
|
::= { jnxVplsBgpPwBindTable 1 }
|
|
|
|
JnxVplsBgpPwBindEntry ::=
|
|
SEQUENCE {
|
|
jnxVplsBgpPwBindLocalVEId Unsigned32,
|
|
jnxVplsBgpPwBindRemoteVEId Unsigned32
|
|
}
|
|
|
|
|
|
|
|
jnxVplsBgpPwBindLocalVEId OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Identifies the local VE that this Pseudo Wire
|
|
is associated with."
|
|
::= { jnxVplsBgpPwBindEntry 1 }
|
|
|
|
jnxVplsBgpPwBindRemoteVEId OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Identifies the remote VE that this Pseudo Wire
|
|
is associated with."
|
|
::= { jnxVplsBgpPwBindEntry 2 }
|
|
|
|
END
|
|
|