1826 lines
74 KiB
Plaintext
1826 lines
74 KiB
Plaintext
|
|
-- *****************************************************************************
|
|
-- Juniper-ATM-CONF
|
|
--
|
|
-- SNMP Agent Capabilities definitions for the ATM MIBs.
|
|
--
|
|
-- Copyright (c) 2001, 2002 Unisphere Networks, Inc.
|
|
-- Copyright (c) 2002-2005 Juniper Networks, Inc.
|
|
-- All rights reserved.
|
|
-- *****************************************************************************
|
|
|
|
Juniper-ATM-CONF DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY
|
|
FROM SNMPv2-SMI
|
|
AGENT-CAPABILITIES
|
|
FROM SNMPv2-CONF
|
|
juniAgents
|
|
FROM Juniper-Agents;
|
|
|
|
juniAtmAgent MODULE-IDENTITY
|
|
LAST-UPDATED "200508171726Z" -- 17-Aug-05 01:26 PM EDT
|
|
ORGANIZATION "Juniper Networks, Inc."
|
|
CONTACT-INFO
|
|
" Juniper Networks, Inc.
|
|
Postal: 10 Technology Park Drive
|
|
Westford, MA 01886-3146
|
|
USA
|
|
Tel: +1 978 589 5800
|
|
E-mail: mib@Juniper.net"
|
|
DESCRIPTION
|
|
"Juniper-UNI-ATM-MIB:
|
|
The agent capabilities definitions for the ATM component of the SNMP
|
|
agent in the Juniper E-series family of products."
|
|
-- Revision History
|
|
REVISION "200508171726Z" -- 17-Aug-05 01:26 PM EDT - JUNOSe 7.3
|
|
DESCRIPTION
|
|
"Juniper-UNI-ATM-MIB:
|
|
Removed SVC support.
|
|
ATM2-MIB:
|
|
Removed SVC support."
|
|
REVISION "200502172315Z" -- 17-Feb-05 06:15 PM EST - JUNOSe 7.1
|
|
DESCRIPTION
|
|
"Juniper-UNI-ATM-MIB:
|
|
Added circuit OAM support to the ATM VCC end point agent capabilities."
|
|
REVISION "200401061953Z" -- 06-Jan-04 02:53 PM EST - JUNOSe 5.3
|
|
DESCRIPTION
|
|
"Added support to export the subinterface description to the line
|
|
cards."
|
|
REVISION "200311071457Z" -- 07-Nov-03 09:57 AM EST - JUNOSe 5.2
|
|
DESCRIPTION
|
|
"ATM2-MIB:
|
|
Updated from an Internet Draft to a Proposed Standard (RFC 3606).
|
|
Juniper-UNI-ATM-MIB:
|
|
Added ATM sub-interface location support."
|
|
REVISION "200305081757Z" -- 08-May-03 01:57 PM EDT - JUNOSe 5.1
|
|
DESCRIPTION
|
|
"Juniper-UNI-ATM-MIB:
|
|
Added ATM F4 OAM circuits management and ATM VP description support."
|
|
REVISION "200209061654Z" -- 06-Sep-02 12:54 PM EDT - JUNOSe 5.0
|
|
DESCRIPTION
|
|
"Juniper-UNI-ATM-MIB:
|
|
Replaced Unisphere names with Juniper names."
|
|
REVISION "200208091415Z" -- 09-Aug-02 10:15 AM EDT - JUNOSe 4.1
|
|
DESCRIPTION
|
|
"ATM2-MIB:
|
|
Added support for the atmSigStatTable, the atmAal5VclStatTable and the
|
|
atmInterfaceExtTable.
|
|
Juniper-UNI-ATM-MIB:
|
|
Added receive bandwith support to CAC.
|
|
Added E164 public addressing support."
|
|
REVISION "200201291518Z" -- 29-Jan-02 10:18 AM EST - JUNOSe 4.0
|
|
DESCRIPTION
|
|
"Juniper-UNI-ATM-MIB:
|
|
Added ATM switched virtual connection (SVC) support to the VCC end
|
|
point capabilities."
|
|
REVISION "200201241416Z" -- 24-Jan-02 09:16 AM EST - JUNOSe 3.4
|
|
DESCRIPTION
|
|
"Juniper-UNI-ATM-MIB:
|
|
Added support for ATM connection admission control (CAC) to the VCC end
|
|
point capabilities."
|
|
REVISION "200112141951Z" -- 14-Dec-01 02:51 PM EST - JUNOSe 3.3
|
|
DESCRIPTION
|
|
"Juniper-UNI-ATM-MIB:
|
|
Added ATM traffic shaping capabilities."
|
|
REVISION "200105231612Z" -- 23-May-01 12:12 PM EDT - JUNOSe 3.2
|
|
DESCRIPTION
|
|
"The initial release of this management information module."
|
|
::= { juniAgents 3 }
|
|
|
|
|
|
-- *****************************************************************************
|
|
-- ATM VCC end point agent capabilities
|
|
-- *****************************************************************************
|
|
juniAtmVccEndPointAgent OBJECT IDENTIFIER ::= { juniAtmAgent 1 }
|
|
|
|
juniAtmVccEndPointAgentV1 AGENT-CAPABILITIES
|
|
PRODUCT-RELEASE
|
|
"Version 1 of the ATM VCC end point agent subcomponent of the JUNOSe
|
|
SNMP agent. This version of the ATM end point subcomponent was
|
|
supported in JUNOSe 3.0 and 3.1 system releases."
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The MIBs supported by the SNMP agent for the ATM application in JUNOSe.
|
|
These capabilities became obsolete when new objects were added to the
|
|
juniAtmSubIfGroup and support for the atmfM4IfLoopbackLocationCode
|
|
object was added."
|
|
SUPPORTS ATM-MIB
|
|
INCLUDES {
|
|
atmInterfaceTCGroup,
|
|
aal5VccGroup,
|
|
atmInterfaceConfGroup2,
|
|
atmVccTerminationGroup2 }
|
|
VARIATION atmVclAdminStatus
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"The atmVccTerminationGroup2 is not used for configuring VCCs.
|
|
Use the Juniper-UNI-ATM-MIB."
|
|
VARIATION atmVclReceiveTrafficDescrIndex
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"The atmVccTerminationGroup2 is not used for configuring VCCs.
|
|
Use the Juniper-UNI-ATM-MIB."
|
|
VARIATION atmVclTransmitTrafficDescrIndex
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"The atmVccTerminationGroup2 is not used for configuring VCCs.
|
|
Use the Juniper-UNI-ATM-MIB."
|
|
VARIATION atmVccAalType
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"The atmVccTerminationGroup2 is not used for configuring VCCs.
|
|
Use the Juniper-UNI-ATM-MIB."
|
|
VARIATION atmVclRowStatus
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"The atmVccTerminationGroup2 is not used for configuring VCCs.
|
|
Use the Juniper-UNI-ATM-MIB."
|
|
VARIATION atmVclCastType
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"The atmVccTerminationGroup2 is not used for configuring VCCs.
|
|
Use the Juniper-UNI-ATM-MIB."
|
|
VARIATION atmVclConnKind
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"The atmVccTerminationGroup2 is not used for configuring VCCs.
|
|
Use the Juniper-UNI-ATM-MIB."
|
|
SUPPORTS Juniper-UNI-ATM-MIB
|
|
INCLUDES {
|
|
juniAtmGroup,
|
|
juniAtmAal5Group,
|
|
juniAtmSubIfGroup }
|
|
::= { juniAtmVccEndPointAgent 1 }
|
|
|
|
juniAtmVccEndPointAgentV2 AGENT-CAPABILITIES
|
|
PRODUCT-RELEASE
|
|
"Version 2 of the ATM VCC end point agent subcomponent of the JUNOSe
|
|
SNMP agent. This version of the ATM end point subcomponent was
|
|
supported in JUNOSe 3.2 and JUNOSe 3.3 system releases."
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The MIBs supported by the SNMP agent for the ATM application in JUNOSe.
|
|
These capabilities became obsolete when support was added to the
|
|
Juniper-UNI-ATM-MIB for connection admission control (CAC)."
|
|
SUPPORTS ATM-MIB
|
|
INCLUDES {
|
|
atmInterfaceTCGroup,
|
|
aal5VccGroup,
|
|
atmInterfaceConfGroup2,
|
|
atmVccTerminationGroup2 }
|
|
VARIATION atmVclAdminStatus
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"The atmVccTerminationGroup2 is not used for configuring VCCs.
|
|
Use the Juniper-UNI-ATM-MIB."
|
|
VARIATION atmVclReceiveTrafficDescrIndex
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"The atmVccTerminationGroup2 is not used for configuring VCCs.
|
|
Use the Juniper-UNI-ATM-MIB."
|
|
VARIATION atmVclTransmitTrafficDescrIndex
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"The atmVccTerminationGroup2 is not used for configuring VCCs.
|
|
Use the Juniper-UNI-ATM-MIB."
|
|
VARIATION atmVccAalType
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"The atmVccTerminationGroup2 is not used for configuring VCCs.
|
|
Use the Juniper-UNI-ATM-MIB."
|
|
VARIATION atmVclRowStatus
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"The atmVccTerminationGroup2 is not used for configuring VCCs.
|
|
Use the Juniper-UNI-ATM-MIB."
|
|
VARIATION atmVclCastType
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"The atmVccTerminationGroup2 is not used for configuring VCCs.
|
|
Use the Juniper-UNI-ATM-MIB."
|
|
VARIATION atmVclConnKind
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"The atmVccTerminationGroup2 is not used for configuring VCCs.
|
|
Use the Juniper-UNI-ATM-MIB."
|
|
SUPPORTS ATM-FORUM-SNMP-M4-MIB
|
|
INCLUDES {
|
|
atmfM4General,
|
|
atmfM4AtmLayerGroup,
|
|
atmfM4VpTestGroup,
|
|
atmfM4VcTestGroup }
|
|
VARIATION atmfM4NeVersion
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmfM4NeVersion object is not supported."
|
|
VARIATION atmfM4NeStartTime
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmfM4NeStartTime object is not supported."
|
|
VARIATION atmfM4NeAlarmSeverityIndex
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmfM4NeAlarmSeverityIndex is not supported."
|
|
VARIATION atmfM4NeSuppressZeroStats
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmfM4NeSuppressZeroStats object is not supported."
|
|
VARIATION atmfM4IfType
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmfM4IfType object is not supported."
|
|
VARIATION atmfM4IfSubscriberAddress
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmfM4IfSubscriberAddress object is not supported."
|
|
VARIATION atmfM4IfPreferredCarrier
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmfM4IfPreferredCarrier object is not supported."
|
|
VARIATION atmfM4IfFarEndCarrierNetwork
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The IfFarEndCarrierNetwork object is not supported."
|
|
VARIATION atmfM4VclSegEndPt
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"An atmfM4VclEntry cannot be created/modified via SNMP."
|
|
SUPPORTS Juniper-UNI-ATM-MIB
|
|
INCLUDES {
|
|
juniAtmGroup2,
|
|
juniAtmAal5Group,
|
|
juniAtmSubIfGroup2,
|
|
juniAtmVpPingControlGroup,
|
|
juniAtmVcPingControlGroup,
|
|
juniAtmPingTrapGroup }
|
|
::= { juniAtmVccEndPointAgent 2 }
|
|
|
|
juniAtmVccEndPointAgentV3 AGENT-CAPABILITIES
|
|
PRODUCT-RELEASE
|
|
"Version 3 of the ATM VCC end point agent subcomponent of the JUNOSe
|
|
SNMP agent. This version of the ATM end point subcomponent was
|
|
supported in JUNOSe 3.4 and subsequent 3.x system releases."
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The MIBs supported by the SNMP agent for the ATM application in JUNOSe.
|
|
These capabilities became obsolete when support was added to the
|
|
Juniper-UNI-ATM-MIB for switched virtual connection (SVC)."
|
|
SUPPORTS ATM-MIB
|
|
INCLUDES {
|
|
atmInterfaceTCGroup,
|
|
aal5VccGroup,
|
|
atmInterfaceConfGroup2,
|
|
atmVccTerminationGroup2 }
|
|
VARIATION atmVclAdminStatus
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"The atmVccTerminationGroup2 is not used for configuring VCCs.
|
|
Use the Juniper-UNI-ATM-MIB."
|
|
VARIATION atmVclReceiveTrafficDescrIndex
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"The atmVccTerminationGroup2 is not used for configuring VCCs.
|
|
Use the Juniper-UNI-ATM-MIB."
|
|
VARIATION atmVclTransmitTrafficDescrIndex
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"The atmVccTerminationGroup2 is not used for configuring VCCs.
|
|
Use the Juniper-UNI-ATM-MIB."
|
|
VARIATION atmVccAalType
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"The atmVccTerminationGroup2 is not used for configuring VCCs.
|
|
Use the Juniper-UNI-ATM-MIB."
|
|
VARIATION atmVclRowStatus
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"The atmVccTerminationGroup2 is not used for configuring VCCs.
|
|
Use the Juniper-UNI-ATM-MIB."
|
|
VARIATION atmVclCastType
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"The atmVccTerminationGroup2 is not used for configuring VCCs.
|
|
Use the Juniper-UNI-ATM-MIB."
|
|
VARIATION atmVclConnKind
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"The atmVccTerminationGroup2 is not used for configuring VCCs.
|
|
Use the Juniper-UNI-ATM-MIB."
|
|
SUPPORTS ATM-FORUM-SNMP-M4-MIB
|
|
INCLUDES {
|
|
atmfM4General,
|
|
atmfM4AtmLayerGroup,
|
|
atmfM4VpTestGroup,
|
|
atmfM4VcTestGroup }
|
|
VARIATION atmfM4NeVersion
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmfM4NeVersion object is not supported."
|
|
VARIATION atmfM4NeStartTime
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmfM4NeStartTime object is not supported."
|
|
VARIATION atmfM4NeAlarmSeverityIndex
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmfM4NeAlarmSeverityIndex is not supported."
|
|
VARIATION atmfM4NeSuppressZeroStats
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmfM4NeSuppressZeroStats object is not supported."
|
|
VARIATION atmfM4IfType
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmfM4IfType object is not supported."
|
|
VARIATION atmfM4IfSubscriberAddress
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmfM4IfSubscriberAddress object is not supported."
|
|
VARIATION atmfM4IfPreferredCarrier
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmfM4IfPreferredCarrier object is not supported."
|
|
VARIATION atmfM4IfFarEndCarrierNetwork
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The IfFarEndCarrierNetwork object is not supported."
|
|
VARIATION atmfM4VclSegEndPt
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"An atmfM4VclEntry cannot be created/modified via SNMP."
|
|
SUPPORTS Juniper-UNI-ATM-MIB
|
|
INCLUDES {
|
|
juniAtmGroup3,
|
|
juniAtmAal5Group,
|
|
juniAtmSubIfGroup2,
|
|
juniAtmVpPingControlGroup,
|
|
juniAtmVcPingControlGroup,
|
|
juniAtmPingTrapGroup }
|
|
::= { juniAtmVccEndPointAgent 3 }
|
|
|
|
juniAtmVccEndPointAgentV4 AGENT-CAPABILITIES
|
|
PRODUCT-RELEASE
|
|
"Version 4 of the ATM VCC end point agent subcomponent of the JUNOSe
|
|
SNMP agent. This version of the ATM end point subcomponent was
|
|
supported in JUNOSe 4.0 system releases."
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The MIBs supported by the SNMP agent for the ATM application in JUNOSe.
|
|
These capabilitie became obsolete when CAC recieve bandwith and E164
|
|
public addressing objects were added."
|
|
SUPPORTS ATM-MIB
|
|
INCLUDES {
|
|
atmInterfaceTCGroup,
|
|
aal5VccGroup,
|
|
atmInterfaceConfGroup2,
|
|
atmVccTerminationGroup2 }
|
|
VARIATION atmVclAdminStatus
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"The atmVccTerminationGroup2 is not used for configuring VCCs.
|
|
Use the Juniper-UNI-ATM-MIB."
|
|
VARIATION atmVclReceiveTrafficDescrIndex
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"The atmVccTerminationGroup2 is not used for configuring VCCs.
|
|
Use the Juniper-UNI-ATM-MIB."
|
|
VARIATION atmVclTransmitTrafficDescrIndex
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"The atmVccTerminationGroup2 is not used for configuring VCCs.
|
|
Use the Juniper-UNI-ATM-MIB."
|
|
VARIATION atmVccAalType
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"The atmVccTerminationGroup2 is not used for configuring VCCs.
|
|
Use the Juniper-UNI-ATM-MIB."
|
|
VARIATION atmVclRowStatus
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"The atmVccTerminationGroup2 is not used for configuring VCCs.
|
|
Use the Juniper-UNI-ATM-MIB."
|
|
VARIATION atmVclCastType
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"The atmVccTerminationGroup2 is not used for configuring VCCs.
|
|
Use the Juniper-UNI-ATM-MIB."
|
|
VARIATION atmVclConnKind
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"The atmVccTerminationGroup2 is not used for configuring VCCs.
|
|
Use the Juniper-UNI-ATM-MIB."
|
|
SUPPORTS ATM2-MIB
|
|
INCLUDES {
|
|
atmCommonGroup,
|
|
atmHostGroup }
|
|
VARIATION atmVplLogicalPortDef
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmVplLogicalPortTable is not supported."
|
|
VARIATION atmVplLogicalPortIndex
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmVplLogicalPortTable is not supported."
|
|
VARIATION atmCurrentlyFailingPVplTimeStamp
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmCurrentlyFailingPVplTable is not supported."
|
|
VARIATION atmCurrentlyFailingPVclTimeStamp
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmCurrentlyFailingPVclTable is not supported."
|
|
VARIATION atmVclAddrType
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmVclAddrTable is not supported."
|
|
VARIATION atmVclAddrRowStatus
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmVclAddrTable is not supported."
|
|
VARIATION atmAddrVclAddrType
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmAddrVclTable is not supported."
|
|
VARIATION atmVclGenSigDescrIndex
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmVclGenTable is not supported."
|
|
SUPPORTS ATM-FORUM-SNMP-M4-MIB
|
|
INCLUDES {
|
|
atmfM4General,
|
|
atmfM4AtmLayerGroup,
|
|
atmfM4VpTestGroup,
|
|
atmfM4VcTestGroup }
|
|
VARIATION atmfM4NeVersion
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmfM4NeVersion object is not supported."
|
|
VARIATION atmfM4NeStartTime
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmfM4NeStartTime object is not supported."
|
|
VARIATION atmfM4NeAlarmSeverityIndex
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmfM4NeAlarmSeverityIndex is not supported."
|
|
VARIATION atmfM4NeSuppressZeroStats
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmfM4NeSuppressZeroStats object is not supported."
|
|
VARIATION atmfM4IfType
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmfM4IfType object is not supported."
|
|
VARIATION atmfM4IfSubscriberAddress
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmfM4IfSubscriberAddress object is not supported."
|
|
VARIATION atmfM4IfPreferredCarrier
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmfM4IfPreferredCarrier object is not supported."
|
|
VARIATION atmfM4IfFarEndCarrierNetwork
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The IfFarEndCarrierNetwork object is not supported."
|
|
VARIATION atmfM4VclSegEndPt
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"An atmfM4VclEntry cannot be created/modified via SNMP."
|
|
SUPPORTS Juniper-UNI-ATM-MIB
|
|
INCLUDES {
|
|
juniAtmGroup4,
|
|
juniAtmAal5Group,
|
|
juniAtmSubIfGroup3,
|
|
juniAtmVpPingControlGroup,
|
|
juniAtmVcPingControlGroup,
|
|
juniAtmPingTrapGroup,
|
|
juniAtmSvcGroup }
|
|
::= { juniAtmVccEndPointAgent 4 }
|
|
|
|
juniAtmVccEndPointAgentV5 AGENT-CAPABILITIES
|
|
PRODUCT-RELEASE
|
|
"Version 5 of the ATM VCC end point agent subcomponent of the JUNOSe
|
|
SNMP agent. This version of the ATM end point subcomponent was
|
|
supported in JUNOSe 4.1 thru 5.0 system releases."
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The MIBs supported by the SNMP agent for the ATM application in JUNOSe.
|
|
These capabilitie became obsolete when F4 flow OAM circuits and ATM VP
|
|
description objects were added to the Juniper-UNI-ATM-MIB."
|
|
SUPPORTS ATM-MIB
|
|
INCLUDES {
|
|
atmInterfaceTCGroup,
|
|
aal5VccGroup,
|
|
atmInterfaceConfGroup2,
|
|
atmVccTerminationGroup2 }
|
|
VARIATION atmVclAdminStatus
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"The atmVccTerminationGroup2 is not used for configuring VCCs.
|
|
Use the Juniper-UNI-ATM-MIB."
|
|
VARIATION atmVclReceiveTrafficDescrIndex
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"The atmVccTerminationGroup2 is not used for configuring VCCs.
|
|
Use the Juniper-UNI-ATM-MIB."
|
|
VARIATION atmVclTransmitTrafficDescrIndex
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"The atmVccTerminationGroup2 is not used for configuring VCCs.
|
|
Use the Juniper-UNI-ATM-MIB."
|
|
VARIATION atmVccAalType
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"The atmVccTerminationGroup2 is not used for configuring VCCs.
|
|
Use the Juniper-UNI-ATM-MIB."
|
|
VARIATION atmVclRowStatus
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"The atmVccTerminationGroup2 is not used for configuring VCCs.
|
|
Use the Juniper-UNI-ATM-MIB."
|
|
VARIATION atmVclCastType
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"The atmVccTerminationGroup2 is not used for configuring VCCs.
|
|
Use the Juniper-UNI-ATM-MIB."
|
|
VARIATION atmVclConnKind
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"The atmVccTerminationGroup2 is not used for configuring VCCs.
|
|
Use the Juniper-UNI-ATM-MIB."
|
|
SUPPORTS ATM2-MIB
|
|
INCLUDES {
|
|
atmCommonGroup,
|
|
atmHostGroup }
|
|
VARIATION atmVplLogicalPortDef
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmVplLogicalPortTable is not supported."
|
|
VARIATION atmVplLogicalPortIndex
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmVplLogicalPortTable is not supported."
|
|
VARIATION atmCurrentlyFailingPVplTimeStamp
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmCurrentlyFailingPVplTable is not supported."
|
|
VARIATION atmCurrentlyFailingPVclTimeStamp
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmCurrentlyFailingPVclTable is not supported."
|
|
VARIATION atmVclAddrType
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmVclAddrTable is not supported."
|
|
VARIATION atmVclAddrRowStatus
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmVclAddrTable is not supported."
|
|
VARIATION atmAddrVclAddrType
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmAddrVclTable is not supported."
|
|
VARIATION atmVclGenSigDescrIndex
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmVclGenTable is not supported."
|
|
SUPPORTS ATM-FORUM-SNMP-M4-MIB
|
|
INCLUDES {
|
|
atmfM4General,
|
|
atmfM4AtmLayerGroup,
|
|
atmfM4VpTestGroup,
|
|
atmfM4VcTestGroup }
|
|
VARIATION atmfM4NeVersion
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmfM4NeVersion object is not supported."
|
|
VARIATION atmfM4NeStartTime
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmfM4NeStartTime object is not supported."
|
|
VARIATION atmfM4NeAlarmSeverityIndex
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmfM4NeAlarmSeverityIndex is not supported."
|
|
VARIATION atmfM4NeSuppressZeroStats
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmfM4NeSuppressZeroStats object is not supported."
|
|
VARIATION atmfM4IfType
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmfM4IfType object is not supported."
|
|
VARIATION atmfM4IfSubscriberAddress
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmfM4IfSubscriberAddress object is not supported."
|
|
VARIATION atmfM4IfPreferredCarrier
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmfM4IfPreferredCarrier object is not supported."
|
|
VARIATION atmfM4IfFarEndCarrierNetwork
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The IfFarEndCarrierNetwork object is not supported."
|
|
VARIATION atmfM4VclSegEndPt
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"An atmfM4VclEntry cannot be created/modified via SNMP."
|
|
SUPPORTS Juniper-UNI-ATM-MIB
|
|
INCLUDES {
|
|
juniAtmGroup5,
|
|
juniAtmAal5Group,
|
|
juniAtmSubIfGroup4,
|
|
juniAtmVpPingControlGroup,
|
|
juniAtmVcPingControlGroup,
|
|
juniAtmPingTrapGroup,
|
|
juniAtmSvcGroup2 }
|
|
::= { juniAtmVccEndPointAgent 5 }
|
|
|
|
juniAtmVccEndPointAgentV6 AGENT-CAPABILITIES
|
|
PRODUCT-RELEASE
|
|
"Version 6 of the ATM VCC end point agent subcomponent of the JUNOSe
|
|
SNMP agent. This version of the ATM end point subcomponent was
|
|
supported in JUNOSe 5.1 system releases."
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The MIBs supported by the SNMP agent for the ATM application in JUNOSe.
|
|
These capabilitie became obsolete when ATM sub-interface location
|
|
support was added to the Juniper-UNI-ATM-MIB."
|
|
SUPPORTS ATM-MIB
|
|
INCLUDES {
|
|
atmInterfaceTCGroup,
|
|
aal5VccGroup,
|
|
atmInterfaceConfGroup2,
|
|
atmVccTerminationGroup2 }
|
|
VARIATION atmVclAdminStatus
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"The atmVccTerminationGroup2 is not used for configuring VCCs.
|
|
Use the Juniper-UNI-ATM-MIB."
|
|
VARIATION atmVclReceiveTrafficDescrIndex
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"The atmVccTerminationGroup2 is not used for configuring VCCs.
|
|
Use the Juniper-UNI-ATM-MIB."
|
|
VARIATION atmVclTransmitTrafficDescrIndex
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"The atmVccTerminationGroup2 is not used for configuring VCCs.
|
|
Use the Juniper-UNI-ATM-MIB."
|
|
VARIATION atmVccAalType
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"The atmVccTerminationGroup2 is not used for configuring VCCs.
|
|
Use the Juniper-UNI-ATM-MIB."
|
|
VARIATION atmVclRowStatus
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"The atmVccTerminationGroup2 is not used for configuring VCCs.
|
|
Use the Juniper-UNI-ATM-MIB."
|
|
VARIATION atmVclCastType
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"The atmVccTerminationGroup2 is not used for configuring VCCs.
|
|
Use the Juniper-UNI-ATM-MIB."
|
|
VARIATION atmVclConnKind
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"The atmVccTerminationGroup2 is not used for configuring VCCs.
|
|
Use the Juniper-UNI-ATM-MIB."
|
|
SUPPORTS ATM2-MIB
|
|
INCLUDES {
|
|
atmCommonGroup,
|
|
atmHostGroup }
|
|
VARIATION atmVplLogicalPortDef
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmVplLogicalPortTable is not supported."
|
|
VARIATION atmVplLogicalPortIndex
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmVplLogicalPortTable is not supported."
|
|
VARIATION atmCurrentlyFailingPVplTimeStamp
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmCurrentlyFailingPVplTable is not supported."
|
|
VARIATION atmCurrentlyFailingPVclTimeStamp
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmCurrentlyFailingPVclTable is not supported."
|
|
VARIATION atmVclAddrType
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmVclAddrTable is not supported."
|
|
VARIATION atmVclAddrRowStatus
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmVclAddrTable is not supported."
|
|
VARIATION atmAddrVclAddrType
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmAddrVclTable is not supported."
|
|
VARIATION atmVclGenSigDescrIndex
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmVclGenTable is not supported."
|
|
SUPPORTS ATM-FORUM-SNMP-M4-MIB
|
|
INCLUDES {
|
|
atmfM4General,
|
|
atmfM4AtmLayerGroup,
|
|
atmfM4VpTestGroup,
|
|
atmfM4VcTestGroup }
|
|
VARIATION atmfM4NeVersion
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmfM4NeVersion object is not supported."
|
|
VARIATION atmfM4NeStartTime
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmfM4NeStartTime object is not supported."
|
|
VARIATION atmfM4NeAlarmSeverityIndex
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmfM4NeAlarmSeverityIndex is not supported."
|
|
VARIATION atmfM4NeSuppressZeroStats
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmfM4NeSuppressZeroStats object is not supported."
|
|
VARIATION atmfM4IfType
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmfM4IfType object is not supported."
|
|
VARIATION atmfM4IfSubscriberAddress
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmfM4IfSubscriberAddress object is not supported."
|
|
VARIATION atmfM4IfPreferredCarrier
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmfM4IfPreferredCarrier object is not supported."
|
|
VARIATION atmfM4IfFarEndCarrierNetwork
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The IfFarEndCarrierNetwork object is not supported."
|
|
VARIATION atmfM4VclSegEndPt
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"An atmfM4VclEntry cannot be created/modified via SNMP."
|
|
SUPPORTS Juniper-UNI-ATM-MIB
|
|
INCLUDES {
|
|
juniAtmGroup6,
|
|
juniAtmAal5Group,
|
|
juniAtmSubIfGroup4,
|
|
juniAtmVpPingControlGroup,
|
|
juniAtmVcPingControlGroup,
|
|
juniAtmPingTrapGroup,
|
|
juniAtmSvcGroup2,
|
|
juniAtmF4OamCircuitGroup }
|
|
::= { juniAtmVccEndPointAgent 6 }
|
|
|
|
juniAtmVccEndPointAgentV7 AGENT-CAPABILITIES
|
|
PRODUCT-RELEASE
|
|
"Version 7 of the ATM VCC end point agent subcomponent of the JUNOSe
|
|
SNMP agent. This version of the ATM end point subcomponent was supported
|
|
in JUNOSe 5.2 system release."
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The MIBs supported by the SNMP agent for the ATM application in JUNOSe.
|
|
These capabilitie became obsolete when support was added to export
|
|
ATM sub-interface descriptions to the line cards."
|
|
SUPPORTS ATM-MIB
|
|
INCLUDES {
|
|
atmInterfaceTCGroup,
|
|
aal5VccGroup,
|
|
atmInterfaceConfGroup2,
|
|
atmVccTerminationGroup2 }
|
|
VARIATION atmVclAdminStatus
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"The atmVccTerminationGroup2 is not used for configuring VCCs.
|
|
Use the Juniper-UNI-ATM-MIB."
|
|
VARIATION atmVclReceiveTrafficDescrIndex
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"The atmVccTerminationGroup2 is not used for configuring VCCs.
|
|
Use the Juniper-UNI-ATM-MIB."
|
|
VARIATION atmVclTransmitTrafficDescrIndex
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"The atmVccTerminationGroup2 is not used for configuring VCCs.
|
|
Use the Juniper-UNI-ATM-MIB."
|
|
VARIATION atmVccAalType
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"The atmVccTerminationGroup2 is not used for configuring VCCs.
|
|
Use the Juniper-UNI-ATM-MIB."
|
|
VARIATION atmVclRowStatus
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"The atmVccTerminationGroup2 is not used for configuring VCCs.
|
|
Use the Juniper-UNI-ATM-MIB."
|
|
VARIATION atmVclCastType
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"The atmVccTerminationGroup2 is not used for configuring VCCs.
|
|
Use the Juniper-UNI-ATM-MIB."
|
|
VARIATION atmVclConnKind
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"The atmVccTerminationGroup2 is not used for configuring VCCs.
|
|
Use the Juniper-UNI-ATM-MIB."
|
|
SUPPORTS ATM2-MIB
|
|
INCLUDES {
|
|
atmCommonGroup,
|
|
atmHostGroup }
|
|
VARIATION atmVplLogicalPortDef
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmVplLogicalPortTable is not supported."
|
|
VARIATION atmVplLogicalPortIndex
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmVplLogicalPortTable is not supported."
|
|
VARIATION atmCurrentlyFailingPVplTimeStamp
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmCurrentlyFailingPVplTable is not supported."
|
|
VARIATION atmCurrentlyFailingPVclTimeStamp
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmCurrentlyFailingPVclTable is not supported."
|
|
VARIATION atmVclAddrType
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmVclAddrTable is not supported."
|
|
VARIATION atmVclAddrRowStatus
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmVclAddrTable is not supported."
|
|
VARIATION atmAddrVclAddrType
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmAddrVclTable is not supported."
|
|
VARIATION atmVclGenSigDescrIndex
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmVclGenTable is not supported."
|
|
SUPPORTS ATM-FORUM-SNMP-M4-MIB
|
|
INCLUDES {
|
|
atmfM4General,
|
|
atmfM4AtmLayerGroup,
|
|
atmfM4VpTestGroup,
|
|
atmfM4VcTestGroup }
|
|
VARIATION atmfM4NeVersion
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmfM4NeVersion object is not supported."
|
|
VARIATION atmfM4NeStartTime
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmfM4NeStartTime object is not supported."
|
|
VARIATION atmfM4NeAlarmSeverityIndex
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmfM4NeAlarmSeverityIndex is not supported."
|
|
VARIATION atmfM4NeSuppressZeroStats
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmfM4NeSuppressZeroStats object is not supported."
|
|
VARIATION atmfM4IfType
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmfM4IfType object is not supported."
|
|
VARIATION atmfM4IfSubscriberAddress
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmfM4IfSubscriberAddress object is not supported."
|
|
VARIATION atmfM4IfPreferredCarrier
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmfM4IfPreferredCarrier object is not supported."
|
|
VARIATION atmfM4IfFarEndCarrierNetwork
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The IfFarEndCarrierNetwork object is not supported."
|
|
VARIATION atmfM4VclSegEndPt
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"An atmfM4VclEntry cannot be created/modified via SNMP."
|
|
SUPPORTS Juniper-UNI-ATM-MIB
|
|
INCLUDES {
|
|
juniAtmGroup6,
|
|
juniAtmAal5Group,
|
|
juniAtmSubIfGroup4,
|
|
juniAtmVpPingControlGroup,
|
|
juniAtmVcPingControlGroup,
|
|
juniAtmPingTrapGroup,
|
|
juniAtmSvcGroup2,
|
|
juniAtmF4OamCircuitGroup,
|
|
juniAtmLocationGroup }
|
|
::= { juniAtmVccEndPointAgent 7 }
|
|
|
|
juniAtmVccEndPointAgentV8 AGENT-CAPABILITIES
|
|
PRODUCT-RELEASE
|
|
"Version 8 of the ATM VCC end point agent subcomponent of the JUNOSe
|
|
SNMP agent. This version of the ATM end point subcomponent was supported
|
|
in JUNOSe 5.3 and 6.0 system releases."
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The MIBs supported by the SNMP agent for the ATM application in
|
|
JUNOSe. These capabilities became obsolete when ATM bulk configuration
|
|
profile override was introduced."
|
|
SUPPORTS ATM-MIB
|
|
INCLUDES {
|
|
atmInterfaceTCGroup,
|
|
aal5VccGroup,
|
|
atmInterfaceConfGroup2,
|
|
atmVccTerminationGroup2 }
|
|
VARIATION atmVclAdminStatus
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"The atmVccTerminationGroup2 is not used for configuring VCCs.
|
|
Use the Juniper-UNI-ATM-MIB."
|
|
VARIATION atmVclReceiveTrafficDescrIndex
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"The atmVccTerminationGroup2 is not used for configuring VCCs.
|
|
Use the Juniper-UNI-ATM-MIB."
|
|
VARIATION atmVclTransmitTrafficDescrIndex
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"The atmVccTerminationGroup2 is not used for configuring VCCs.
|
|
Use the Juniper-UNI-ATM-MIB."
|
|
VARIATION atmVccAalType
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"The atmVccTerminationGroup2 is not used for configuring VCCs.
|
|
Use the Juniper-UNI-ATM-MIB."
|
|
VARIATION atmVclRowStatus
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"The atmVccTerminationGroup2 is not used for configuring VCCs.
|
|
Use the Juniper-UNI-ATM-MIB."
|
|
VARIATION atmVclCastType
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"The atmVccTerminationGroup2 is not used for configuring VCCs.
|
|
Use the Juniper-UNI-ATM-MIB."
|
|
VARIATION atmVclConnKind
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"The atmVccTerminationGroup2 is not used for configuring VCCs.
|
|
Use the Juniper-UNI-ATM-MIB."
|
|
SUPPORTS ATM2-MIB
|
|
INCLUDES {
|
|
atmCommonGroup,
|
|
atmHostGroup }
|
|
VARIATION atmVplLogicalPortDef
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmVplLogicalPortTable is not supported."
|
|
VARIATION atmVplLogicalPortIndex
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmVplLogicalPortTable is not supported."
|
|
VARIATION atmCurrentlyFailingPVplTimeStamp
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmCurrentlyFailingPVplTable is not supported."
|
|
VARIATION atmCurrentlyFailingPVclTimeStamp
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmCurrentlyFailingPVclTable is not supported."
|
|
VARIATION atmVclAddrType
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmVclAddrTable is not supported."
|
|
VARIATION atmVclAddrRowStatus
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmVclAddrTable is not supported."
|
|
VARIATION atmAddrVclAddrType
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmAddrVclTable is not supported."
|
|
VARIATION atmVclGenSigDescrIndex
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmVclGenTable is not supported."
|
|
SUPPORTS ATM-FORUM-SNMP-M4-MIB
|
|
INCLUDES {
|
|
atmfM4General,
|
|
atmfM4AtmLayerGroup,
|
|
atmfM4VpTestGroup,
|
|
atmfM4VcTestGroup }
|
|
VARIATION atmfM4NeVersion
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmfM4NeVersion object is not supported."
|
|
VARIATION atmfM4NeStartTime
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmfM4NeStartTime object is not supported."
|
|
VARIATION atmfM4NeAlarmSeverityIndex
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmfM4NeAlarmSeverityIndex is not supported."
|
|
VARIATION atmfM4NeSuppressZeroStats
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmfM4NeSuppressZeroStats object is not supported."
|
|
VARIATION atmfM4IfType
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmfM4IfType object is not supported."
|
|
VARIATION atmfM4IfSubscriberAddress
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmfM4IfSubscriberAddress object is not supported."
|
|
VARIATION atmfM4IfPreferredCarrier
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmfM4IfPreferredCarrier object is not supported."
|
|
VARIATION atmfM4IfFarEndCarrierNetwork
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The IfFarEndCarrierNetwork object is not supported."
|
|
VARIATION atmfM4VclSegEndPt
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"An atmfM4VclEntry cannot be created/modified via SNMP."
|
|
SUPPORTS Juniper-UNI-ATM-MIB
|
|
INCLUDES {
|
|
juniAtmGroup6,
|
|
juniAtmAal5Group,
|
|
juniAtmSubIfGroup5,
|
|
juniAtmVpPingControlGroup,
|
|
juniAtmVcPingControlGroup,
|
|
juniAtmPingTrapGroup,
|
|
juniAtmSvcGroup2,
|
|
juniAtmF4OamCircuitGroup,
|
|
juniAtmLocationGroup }
|
|
::= { juniAtmVccEndPointAgent 8 }
|
|
|
|
juniAtmVccEndPointAgentV9 AGENT-CAPABILITIES
|
|
PRODUCT-RELEASE
|
|
"Version 9 of the ATM VCC end point agent subcomponent of the JUNOSe
|
|
SNMP agent. This version of the ATM end point subcomponent was supported
|
|
in JUNOSe 6.1 system release."
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The MIBs supported by the SNMP agent for the ATM application in
|
|
JUNOSe. These capabilities became obsolete when ATM bulk configuration
|
|
profile override was introduced."
|
|
SUPPORTS ATM-MIB
|
|
INCLUDES {
|
|
atmInterfaceTCGroup,
|
|
aal5VccGroup,
|
|
atmInterfaceConfGroup2,
|
|
atmVccTerminationGroup2 }
|
|
VARIATION atmVclAdminStatus
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"The atmVccTerminationGroup2 is not used for configuring VCCs.
|
|
Use the Juniper-UNI-ATM-MIB."
|
|
VARIATION atmVclReceiveTrafficDescrIndex
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"The atmVccTerminationGroup2 is not used for configuring VCCs.
|
|
Use the Juniper-UNI-ATM-MIB."
|
|
VARIATION atmVclTransmitTrafficDescrIndex
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"The atmVccTerminationGroup2 is not used for configuring VCCs.
|
|
Use the Juniper-UNI-ATM-MIB."
|
|
VARIATION atmVccAalType
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"The atmVccTerminationGroup2 is not used for configuring VCCs.
|
|
Use the Juniper-UNI-ATM-MIB."
|
|
VARIATION atmVclRowStatus
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"The atmVccTerminationGroup2 is not used for configuring VCCs.
|
|
Use the Juniper-UNI-ATM-MIB."
|
|
VARIATION atmVclCastType
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"The atmVccTerminationGroup2 is not used for configuring VCCs.
|
|
Use the Juniper-UNI-ATM-MIB."
|
|
VARIATION atmVclConnKind
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"The atmVccTerminationGroup2 is not used for configuring VCCs.
|
|
Use the Juniper-UNI-ATM-MIB."
|
|
SUPPORTS ATM2-MIB
|
|
INCLUDES {
|
|
atmCommonGroup,
|
|
atmHostGroup }
|
|
VARIATION atmVplLogicalPortDef
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmVplLogicalPortTable is not supported."
|
|
VARIATION atmVplLogicalPortIndex
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmVplLogicalPortTable is not supported."
|
|
VARIATION atmCurrentlyFailingPVplTimeStamp
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmCurrentlyFailingPVplTable is not supported."
|
|
VARIATION atmCurrentlyFailingPVclTimeStamp
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmCurrentlyFailingPVclTable is not supported."
|
|
VARIATION atmVclAddrType
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmVclAddrTable is not supported."
|
|
VARIATION atmVclAddrRowStatus
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmVclAddrTable is not supported."
|
|
VARIATION atmAddrVclAddrType
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmAddrVclTable is not supported."
|
|
VARIATION atmVclGenSigDescrIndex
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmVclGenTable is not supported."
|
|
SUPPORTS ATM-FORUM-SNMP-M4-MIB
|
|
INCLUDES {
|
|
atmfM4General,
|
|
atmfM4AtmLayerGroup,
|
|
atmfM4VpTestGroup,
|
|
atmfM4VcTestGroup }
|
|
VARIATION atmfM4NeVersion
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmfM4NeVersion object is not supported."
|
|
VARIATION atmfM4NeStartTime
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmfM4NeStartTime object is not supported."
|
|
VARIATION atmfM4NeAlarmSeverityIndex
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmfM4NeAlarmSeverityIndex is not supported."
|
|
VARIATION atmfM4NeSuppressZeroStats
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmfM4NeSuppressZeroStats object is not supported."
|
|
VARIATION atmfM4IfType
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmfM4IfType object is not supported."
|
|
VARIATION atmfM4IfSubscriberAddress
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmfM4IfSubscriberAddress object is not supported."
|
|
VARIATION atmfM4IfPreferredCarrier
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmfM4IfPreferredCarrier object is not supported."
|
|
VARIATION atmfM4IfFarEndCarrierNetwork
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The IfFarEndCarrierNetwork object is not supported."
|
|
VARIATION atmfM4VclSegEndPt
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"An atmfM4VclEntry cannot be created/modified via SNMP."
|
|
SUPPORTS Juniper-UNI-ATM-MIB
|
|
INCLUDES {
|
|
juniAtmGroup7,
|
|
juniAtmAal5Group,
|
|
juniAtmSubIfGroup5,
|
|
juniAtmVpPingControlGroup,
|
|
juniAtmVcPingControlGroup,
|
|
juniAtmPingTrapGroup,
|
|
juniAtmSvcGroup2,
|
|
juniAtmF4OamCircuitGroup,
|
|
juniAtmLocationGroup }
|
|
::= { juniAtmVccEndPointAgent 9 }
|
|
|
|
juniAtmVccEndPointAgentV10 AGENT-CAPABILITIES
|
|
PRODUCT-RELEASE
|
|
"Version 10 of the ATM VCC end point agent subcomponent of the JUNOSe
|
|
SNMP agent. This version of the ATM end point subcomponent is supported
|
|
in JUNOSe 7.0 and subsequent system releases."
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The MIBs supported by the SNMP agent for the ATM application in
|
|
JUNOSe.These capabilities became obsolete when ATM VP Statistics
|
|
was introduced."
|
|
SUPPORTS ATM-MIB
|
|
INCLUDES {
|
|
atmInterfaceTCGroup,
|
|
aal5VccGroup,
|
|
atmInterfaceConfGroup2,
|
|
atmVccTerminationGroup2 }
|
|
VARIATION atmVclAdminStatus
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"The atmVccTerminationGroup2 is not used for configuring VCCs.
|
|
Use the Juniper-UNI-ATM-MIB."
|
|
VARIATION atmVclReceiveTrafficDescrIndex
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"The atmVccTerminationGroup2 is not used for configuring VCCs.
|
|
Use the Juniper-UNI-ATM-MIB."
|
|
VARIATION atmVclTransmitTrafficDescrIndex
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"The atmVccTerminationGroup2 is not used for configuring VCCs.
|
|
Use the Juniper-UNI-ATM-MIB."
|
|
VARIATION atmVccAalType
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"The atmVccTerminationGroup2 is not used for configuring VCCs.
|
|
Use the Juniper-UNI-ATM-MIB."
|
|
VARIATION atmVclRowStatus
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"The atmVccTerminationGroup2 is not used for configuring VCCs.
|
|
Use the Juniper-UNI-ATM-MIB."
|
|
VARIATION atmVclCastType
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"The atmVccTerminationGroup2 is not used for configuring VCCs.
|
|
Use the Juniper-UNI-ATM-MIB."
|
|
VARIATION atmVclConnKind
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"The atmVccTerminationGroup2 is not used for configuring VCCs.
|
|
Use the Juniper-UNI-ATM-MIB."
|
|
SUPPORTS ATM2-MIB
|
|
INCLUDES {
|
|
atmCommonGroup,
|
|
atmHostGroup }
|
|
VARIATION atmVplLogicalPortDef
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmVplLogicalPortTable is not supported."
|
|
VARIATION atmVplLogicalPortIndex
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmVplLogicalPortTable is not supported."
|
|
VARIATION atmCurrentlyFailingPVplTimeStamp
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmCurrentlyFailingPVplTable is not supported."
|
|
VARIATION atmCurrentlyFailingPVclTimeStamp
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmCurrentlyFailingPVclTable is not supported."
|
|
VARIATION atmVclAddrType
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmVclAddrTable is not supported."
|
|
VARIATION atmVclAddrRowStatus
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmVclAddrTable is not supported."
|
|
VARIATION atmAddrVclAddrType
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmAddrVclTable is not supported."
|
|
VARIATION atmVclGenSigDescrIndex
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmVclGenTable is not supported."
|
|
SUPPORTS ATM-FORUM-SNMP-M4-MIB
|
|
INCLUDES {
|
|
atmfM4General,
|
|
atmfM4AtmLayerGroup,
|
|
atmfM4VpTestGroup,
|
|
atmfM4VcTestGroup }
|
|
VARIATION atmfM4NeVersion
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmfM4NeVersion object is not supported."
|
|
VARIATION atmfM4NeStartTime
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmfM4NeStartTime object is not supported."
|
|
VARIATION atmfM4NeAlarmSeverityIndex
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmfM4NeAlarmSeverityIndex is not supported."
|
|
VARIATION atmfM4NeSuppressZeroStats
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmfM4NeSuppressZeroStats object is not supported."
|
|
VARIATION atmfM4IfType
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmfM4IfType object is not supported."
|
|
VARIATION atmfM4IfSubscriberAddress
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmfM4IfSubscriberAddress object is not supported."
|
|
VARIATION atmfM4IfPreferredCarrier
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmfM4IfPreferredCarrier object is not supported."
|
|
VARIATION atmfM4IfFarEndCarrierNetwork
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The IfFarEndCarrierNetwork object is not supported."
|
|
VARIATION atmfM4VclSegEndPt
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"An atmfM4VclEntry cannot be created/modified via SNMP."
|
|
SUPPORTS Juniper-UNI-ATM-MIB
|
|
INCLUDES {
|
|
juniAtmGroup8,
|
|
juniAtmAal5Group,
|
|
juniAtmSubIfGroup5,
|
|
juniAtmVpPingControlGroup,
|
|
juniAtmVcPingControlGroup,
|
|
juniAtmPingTrapGroup,
|
|
juniAtmSvcGroup2,
|
|
juniAtmF4OamCircuitGroup,
|
|
juniAtmLocationGroup }
|
|
::= { juniAtmVccEndPointAgent 10 }
|
|
|
|
juniAtmVccEndPointAgentV11 AGENT-CAPABILITIES
|
|
PRODUCT-RELEASE
|
|
"Version 11 of the ATM VCC end point agent subcomponent of the JUNOSe
|
|
SNMP agent. This version of the ATM end point subcomponent is supported
|
|
in JUNOSe 7.1 and 7.2 system releases."
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The MIBs supported by the SNMP agent for the ATM application in
|
|
JUNOSe. These capabilities became obsolete when SVC support
|
|
was removed."
|
|
SUPPORTS ATM-MIB
|
|
INCLUDES {
|
|
atmInterfaceTCGroup,
|
|
aal5VccGroup,
|
|
atmInterfaceConfGroup2,
|
|
atmVccTerminationGroup2 }
|
|
VARIATION atmVclAdminStatus
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"The atmVccTerminationGroup2 is not used for configuring VCCs.
|
|
Use the Juniper-UNI-ATM-MIB."
|
|
VARIATION atmVclReceiveTrafficDescrIndex
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"The atmVccTerminationGroup2 is not used for configuring VCCs.
|
|
Use the Juniper-UNI-ATM-MIB."
|
|
VARIATION atmVclTransmitTrafficDescrIndex
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"The atmVccTerminationGroup2 is not used for configuring VCCs.
|
|
Use the Juniper-UNI-ATM-MIB."
|
|
VARIATION atmVccAalType
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"The atmVccTerminationGroup2 is not used for configuring VCCs.
|
|
Use the Juniper-UNI-ATM-MIB."
|
|
VARIATION atmVclRowStatus
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"The atmVccTerminationGroup2 is not used for configuring VCCs.
|
|
Use the Juniper-UNI-ATM-MIB."
|
|
VARIATION atmVclCastType
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"The atmVccTerminationGroup2 is not used for configuring VCCs.
|
|
Use the Juniper-UNI-ATM-MIB."
|
|
VARIATION atmVclConnKind
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"The atmVccTerminationGroup2 is not used for configuring VCCs.
|
|
Use the Juniper-UNI-ATM-MIB."
|
|
SUPPORTS ATM2-MIB
|
|
INCLUDES {
|
|
atmCommonGroup,
|
|
atmHostGroup }
|
|
VARIATION atmVplLogicalPortDef
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmVplLogicalPortTable is not supported."
|
|
VARIATION atmVplLogicalPortIndex
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmVplLogicalPortTable is not supported."
|
|
VARIATION atmCurrentlyFailingPVplTimeStamp
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmCurrentlyFailingPVplTable is not supported."
|
|
VARIATION atmCurrentlyFailingPVclTimeStamp
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmCurrentlyFailingPVclTable is not supported."
|
|
VARIATION atmVclAddrType
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmVclAddrTable is not supported."
|
|
VARIATION atmVclAddrRowStatus
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmVclAddrTable is not supported."
|
|
VARIATION atmAddrVclAddrType
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmAddrVclTable is not supported."
|
|
VARIATION atmVclGenSigDescrIndex
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmVclGenTable is not supported."
|
|
SUPPORTS ATM-FORUM-SNMP-M4-MIB
|
|
INCLUDES {
|
|
atmfM4General,
|
|
atmfM4AtmLayerGroup,
|
|
atmfM4VpTestGroup,
|
|
atmfM4VcTestGroup }
|
|
VARIATION atmfM4NeVersion
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmfM4NeVersion object is not supported."
|
|
VARIATION atmfM4NeStartTime
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmfM4NeStartTime object is not supported."
|
|
VARIATION atmfM4NeAlarmSeverityIndex
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmfM4NeAlarmSeverityIndex is not supported."
|
|
VARIATION atmfM4NeSuppressZeroStats
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmfM4NeSuppressZeroStats object is not supported."
|
|
VARIATION atmfM4IfType
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmfM4IfType object is not supported."
|
|
VARIATION atmfM4IfSubscriberAddress
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmfM4IfSubscriberAddress object is not supported."
|
|
VARIATION atmfM4IfPreferredCarrier
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmfM4IfPreferredCarrier object is not supported."
|
|
VARIATION atmfM4IfFarEndCarrierNetwork
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The IfFarEndCarrierNetwork object is not supported."
|
|
VARIATION atmfM4VclSegEndPt
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"An atmfM4VclEntry cannot be created/modified via SNMP."
|
|
SUPPORTS Juniper-UNI-ATM-MIB
|
|
INCLUDES {
|
|
juniAtmGroup8,
|
|
juniAtmAal5Group,
|
|
juniAtmSubIfGroup6,
|
|
juniAtmVpPingControlGroup,
|
|
juniAtmVcPingControlGroup,
|
|
juniAtmPingTrapGroup,
|
|
juniAtmSvcGroup2,
|
|
juniAtmF4OamCircuitGroup2,
|
|
juniAtmLocationGroup,
|
|
juniAtmVpStatsGroup }
|
|
::= { juniAtmVccEndPointAgent 11 }
|
|
|
|
juniAtmVccEndPointAgentV12 AGENT-CAPABILITIES
|
|
PRODUCT-RELEASE
|
|
"Version 12 of the ATM VCC end point agent subcomponent of the JUNOSe
|
|
SNMP agent. This version of the ATM end point subcomponent is supported
|
|
in JUNOSe 7.3 and subsequent system releases."
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MIBs supported by the SNMP agent for the ATM application in
|
|
JUNOSe."
|
|
SUPPORTS ATM-MIB
|
|
INCLUDES {
|
|
atmInterfaceTCGroup,
|
|
aal5VccGroup,
|
|
atmInterfaceConfGroup2,
|
|
atmVccTerminationGroup2 }
|
|
VARIATION atmVclAdminStatus
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"The atmVccTerminationGroup2 is not used for configuring VCCs.
|
|
Use the Juniper-UNI-ATM-MIB."
|
|
VARIATION atmVclReceiveTrafficDescrIndex
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"The atmVccTerminationGroup2 is not used for configuring VCCs.
|
|
Use the Juniper-UNI-ATM-MIB."
|
|
VARIATION atmVclTransmitTrafficDescrIndex
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"The atmVccTerminationGroup2 is not used for configuring VCCs.
|
|
Use the Juniper-UNI-ATM-MIB."
|
|
VARIATION atmVccAalType
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"The atmVccTerminationGroup2 is not used for configuring VCCs.
|
|
Use the Juniper-UNI-ATM-MIB."
|
|
VARIATION atmVclRowStatus
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"The atmVccTerminationGroup2 is not used for configuring VCCs.
|
|
Use the Juniper-UNI-ATM-MIB."
|
|
VARIATION atmVclCastType
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"The atmVccTerminationGroup2 is not used for configuring VCCs.
|
|
Use the Juniper-UNI-ATM-MIB."
|
|
VARIATION atmVclConnKind
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"The atmVccTerminationGroup2 is not used for configuring VCCs.
|
|
Use the Juniper-UNI-ATM-MIB."
|
|
SUPPORTS ATM2-MIB
|
|
INCLUDES {
|
|
atmCommonGroup,
|
|
atmHostGroup }
|
|
VARIATION atmSigSSCOPConEvents
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmSigStatTable is not supported."
|
|
VARIATION atmSigSSCOPErrdPdus
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmSigStatTable is not supported."
|
|
VARIATION atmSigDetectSetupAttempts
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmSigStatTable is not supported."
|
|
VARIATION atmSigEmitSetupAttempts
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmSigStatTable is not supported."
|
|
VARIATION atmSigDetectUnavailRoutes
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmSigStatTable is not supported."
|
|
VARIATION atmSigEmitUnavailRoutes
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmSigStatTable is not supported."
|
|
VARIATION atmSigDetectUnavailResrcs
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmSigStatTable is not supported."
|
|
VARIATION atmSigEmitUnavailResrcs
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmSigStatTable is not supported."
|
|
VARIATION atmSigDetectCldPtyEvents
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmSigStatTable is not supported."
|
|
VARIATION atmSigEmitCldPtyEvents
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmSigStatTable is not supported."
|
|
VARIATION atmSigDetectMsgErrors
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmSigStatTable is not supported."
|
|
VARIATION atmSigEmitMsgErrors
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmSigStatTable is not supported."
|
|
VARIATION atmSigDetectClgPtyEvents
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmSigStatTable is not supported."
|
|
VARIATION atmSigEmitClgPtyEvents
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmSigStatTable is not supported."
|
|
VARIATION atmSigDetectTimerExpireds
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmSigStatTable is not supported."
|
|
VARIATION atmSigEmitTimerExpireds
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmSigStatTable is not supported."
|
|
VARIATION atmSigDetectRestarts
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmSigStatTable is not supported."
|
|
VARIATION atmSigEmitRestarts
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmSigStatTable is not supported."
|
|
VARIATION atmSigInEstabls
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmSigStatTable is not supported."
|
|
VARIATION atmSigOutEstabls
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmSigStatTable is not supported."
|
|
VARIATION atmVplLogicalPortDef
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmVplLogicalPortTable is not supported."
|
|
VARIATION atmVplLogicalPortIndex
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmVplLogicalPortTable is not supported."
|
|
VARIATION atmInterfaceConfMaxSvpcVpi
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmInterfaceConfMaxSvpcVpi is not supported."
|
|
VARIATION atmInterfaceCurrentMaxSvpcVpi
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmInterfaceCurrentMaxSvpcVpi is not supported."
|
|
VARIATION atmInterfaceConfMaxSvccVpi
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmInterfaceConfMaxSvccVpi is not supported."
|
|
VARIATION atmInterfaceCurrentMaxSvccVpi
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmInterfaceCurrentMaxSvccVpi is not supported."
|
|
VARIATION atmInterfaceConfMinSvccVci
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmInterfaceConfMinSvccVci is not supported."
|
|
VARIATION atmInterfaceCurrentMinSvccVci
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmInterfaceCurrentMinSvccVci is not supported."
|
|
VARIATION atmIntfSigVccRxTrafficDescrIndex
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmIntfSigVccRxTrafficDescrIndex is not supported."
|
|
VARIATION atmIntfSigVccTxTrafficDescrIndex
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmIntfSigVccTxTrafficDescrIndex is not supported."
|
|
VARIATION atmIntfLeafSetupFailures
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmIntfLeafSetupFailures is not supported."
|
|
VARIATION atmIntfLeafSetupRequests
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmIntfLeafSetupRequests is not supported."
|
|
VARIATION atmCurrentlyFailingPVplTimeStamp
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmCurrentlyFailingPVplTable is not supported."
|
|
VARIATION atmCurrentlyFailingPVclTimeStamp
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmCurrentlyFailingPVclTable is not supported."
|
|
VARIATION atmVclAddrType
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmVclAddrTable is not supported."
|
|
VARIATION atmVclAddrRowStatus
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmVclAddrTable is not supported."
|
|
VARIATION atmAddrVclAddrType
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmAddrVclTable is not supported."
|
|
VARIATION atmVclGenSigDescrIndex
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmVclGenTable is not supported."
|
|
SUPPORTS ATM-FORUM-SNMP-M4-MIB
|
|
INCLUDES {
|
|
atmfM4General,
|
|
atmfM4AtmLayerGroup,
|
|
atmfM4VpTestGroup,
|
|
atmfM4VcTestGroup }
|
|
VARIATION atmfM4NeVersion
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmfM4NeVersion object is not supported."
|
|
VARIATION atmfM4NeStartTime
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmfM4NeStartTime object is not supported."
|
|
VARIATION atmfM4NeAlarmSeverityIndex
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmfM4NeAlarmSeverityIndex is not supported."
|
|
VARIATION atmfM4NeSuppressZeroStats
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmfM4NeSuppressZeroStats object is not supported."
|
|
VARIATION atmfM4IfType
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmfM4IfType object is not supported."
|
|
VARIATION atmfM4IfSubscriberAddress
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmfM4IfSubscriberAddress object is not supported."
|
|
VARIATION atmfM4IfPreferredCarrier
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The atmfM4IfPreferredCarrier object is not supported."
|
|
VARIATION atmfM4IfFarEndCarrierNetwork
|
|
ACCESS not-implemented
|
|
DESCRIPTION
|
|
"The IfFarEndCarrierNetwork object is not supported."
|
|
VARIATION atmfM4VclSegEndPt
|
|
ACCESS read-only
|
|
DESCRIPTION
|
|
"An atmfM4VclEntry cannot be created/modified via SNMP."
|
|
SUPPORTS Juniper-UNI-ATM-MIB
|
|
INCLUDES {
|
|
juniAtmGroup8,
|
|
juniAtmAal5Group,
|
|
juniAtmSubIfGroup7,
|
|
juniAtmVpPingControlGroup,
|
|
juniAtmVcPingControlGroup,
|
|
juniAtmPingTrapGroup,
|
|
juniAtmSvcGroup2,
|
|
juniAtmF4OamCircuitGroup2,
|
|
juniAtmLocationGroup,
|
|
juniAtmVpStatsGroup }
|
|
::= { juniAtmVccEndPointAgent 12 }
|
|
|
|
-- *****************************************************************************
|
|
-- ATM VP tunnel agent capabilities
|
|
-- *****************************************************************************
|
|
juniAtmVpTunnelAgent OBJECT IDENTIFIER ::= { juniAtmAgent 2 }
|
|
|
|
juniAtmVpTunnelAgentV1 AGENT-CAPABILITIES
|
|
PRODUCT-RELEASE
|
|
"Version 1 of the ATM VP tunnel subcomponent of the JUNOSe SNMP agent.
|
|
This version of the ATM tunnel subcomponent is supported in JUNOSe 3.0
|
|
and subsequent system releases."
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MIB supported by the SNMP agent for the ATM application in JUNOSe."
|
|
SUPPORTS Juniper-UNI-ATM-MIB
|
|
INCLUDES {
|
|
juniAtmVpTunnelGroup }
|
|
::= { juniAtmVpTunnelAgent 1 }
|
|
|
|
|
|
-- *****************************************************************************
|
|
-- ATM NBMA interface agent capabilities
|
|
-- *****************************************************************************
|
|
juniAtmNbmaAgent OBJECT IDENTIFIER ::= { juniAtmAgent 3 }
|
|
|
|
juniAtmNbmaAgentV1 AGENT-CAPABILITIES
|
|
PRODUCT-RELEASE
|
|
"Version 1 of the ATM NBMA interface subcomponent of the JUNOSe SNMP
|
|
agent. This version of the ATM NBMA subcomponent is supported in JUNOSe
|
|
3.2 and subsequent system releases."
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MIB supported by the SNMP agent for the ATM application in JUNOSe."
|
|
SUPPORTS Juniper-UNI-ATM-MIB
|
|
INCLUDES {
|
|
juniAtmNbmaMapGroup }
|
|
::= { juniAtmNbmaAgent 1 }
|
|
|
|
|
|
-- *****************************************************************************
|
|
-- ATM Switch agent capabilities
|
|
--
|
|
-- This is a placeholder for the agent capabilities for the ATM switch (cross
|
|
-- connect) subcomponent of the JUNOSe SNMP agent.
|
|
-- The ATM switch subcomponent has not been supported in a released product.
|
|
-- *****************************************************************************
|
|
juniAtmSwitchAgent OBJECT IDENTIFIER ::= { juniAtmAgent 4 }
|
|
juniAtmSwitchAgentV1 OBJECT IDENTIFIER ::= { juniAtmSwitchAgent 1 } -- Obsolete
|
|
juniAtmSwitchAgentV2 OBJECT IDENTIFIER ::= { juniAtmSwitchAgent 2 } -- Obsolete
|
|
|
|
|
|
-- *****************************************************************************
|
|
-- ATM traffic shaping agent capabilities
|
|
-- *****************************************************************************
|
|
juniAtmTrafficShapingAgent OBJECT IDENTIFIER ::= { juniAtmAgent 5 }
|
|
|
|
juniAtmTrafficShapingAgentV1 AGENT-CAPABILITIES
|
|
PRODUCT-RELEASE
|
|
"Version 1 of the ATM traffic shaping subcomponent of the JUNOSe SNMP
|
|
agent. This version of the ATM traffic shaping subcomponent is
|
|
supported in JUNOSe 3.3 and subsequent system releases."
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MIB supported by the SNMP agent for the ATM application in JUNOSe."
|
|
SUPPORTS Juniper-UNI-ATM-MIB
|
|
INCLUDES {
|
|
juniAtmTrafficShapingGroup }
|
|
::= { juniAtmTrafficShapingAgent 1 }
|
|
|
|
END
|