682 lines
22 KiB
Plaintext
682 lines
22 KiB
Plaintext
|
|
-- *****************************************************************************
|
|
-- Juniper-LOG-MIB
|
|
--
|
|
-- Juniper Networks Enterprise MIB
|
|
-- Extensions for Logging Management
|
|
--
|
|
-- Copyright (c) 1999 Redstone Communications, Inc.
|
|
-- Copyright (c) 1999, 2001 Unisphere Networks, Inc.
|
|
-- Copyright (c) 2002 Juniper Networks, Inc.
|
|
-- All Rights Reserved.
|
|
-- *****************************************************************************
|
|
|
|
Juniper-LOG-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-TYPE, Integer32, Counter32,
|
|
Unsigned32, IpAddress
|
|
FROM SNMPv2-SMI
|
|
TEXTUAL-CONVENTION, DisplayString, RowStatus, TruthValue, TimeStamp,
|
|
DateAndTime
|
|
FROM SNMPv2-TC
|
|
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
|
|
FROM SNMPv2-CONF
|
|
juniMibs
|
|
FROM Juniper-MIBs
|
|
JuniLogSeverity
|
|
FROM Juniper-TC;
|
|
|
|
juniLogMIB MODULE-IDENTITY
|
|
LAST-UPDATED "200209162144Z" -- 16-Sep-02 05:44 PM EDT
|
|
ORGANIZATION "Juniper Networks, Inc."
|
|
CONTACT-INFO
|
|
" Juniper Networks, Inc.
|
|
Postal: 10 Technology Park Drive
|
|
Westford, MA 01886-3146
|
|
USA
|
|
Tel: +1 978 589 5800
|
|
Email: mib@Juniper.net"
|
|
DESCRIPTION
|
|
"The Logging Facility MIB for the Juniper Networks enterprise."
|
|
-- Revision History
|
|
REVISION "200209162144Z" -- 16-Sep-02 05:44 PM EDT - JUNOSe 5.0
|
|
DESCRIPTION
|
|
"Replaced Unisphere names with Juniper names."
|
|
REVISION "200103161902Z" -- 16-Mar-01 02:02 PM EST - JUNOSe 3.0
|
|
DESCRIPTION
|
|
"Make it SMIv2 conformant."
|
|
REVISION "200003270500Z" -- 27-Mar-00 - JUNOSe 2.0
|
|
DESCRIPTION
|
|
"Replace single syslog destination with table of syslog destinations,
|
|
and add syslog facility as an attribute for syslogs."
|
|
REVISION "9911080000Z" -- 8-Nov-99 - JUNOSe 1.3
|
|
DESCRIPTION
|
|
"Initial version of this MIB module."
|
|
::= { juniMibs 28 }
|
|
|
|
--
|
|
-- Brief Description of Logging Facility Model
|
|
--
|
|
-- A system application may support one or more logging categories. Each
|
|
-- category can be separately configured for severity and verbosity levels of
|
|
-- the logging messages it generates in reponse to category-specific events.
|
|
-- The severity level filters the generation of messages; the verbosity level
|
|
-- controls the content of each generated message. Each category is resource-
|
|
-- limited in the rate of messages it can generate, thus high event volume in
|
|
-- one category will not exhaust common resources to the extent that other log
|
|
-- categories are starved.
|
|
--
|
|
-- Generated log messages are recorded into a central circular repository,
|
|
-- called the log message table. Each such recorded message is examined and can
|
|
-- be sent to as many as three logging destinations: network-based SYSLOG
|
|
-- server; local console; and local nonvolatile log file. Each of these
|
|
-- destinations is separately configurable for severity level of messages it
|
|
-- wishes to receive.
|
|
--
|
|
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
-- Textual conventions
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
JuniLogCatName ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "32a"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of a log category. Represents textual information taken from
|
|
the NVT ASCII character set."
|
|
REFERENCE
|
|
"RFC 854: NVT ASCII character set. See SNMPv2-TC.DisplayString
|
|
DESCRIPTION for a summary."
|
|
SYNTAX OCTET STRING (SIZE (1..32))
|
|
|
|
JuniLogVerbosity ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The log verbosity level. Not all event types
|
|
offer medium- or high-verbosity levels of detail."
|
|
SYNTAX INTEGER {
|
|
low(0),
|
|
medium(1),
|
|
high(2) }
|
|
|
|
JuniLogSyslogFacility ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The syslog daemon facility id."
|
|
SYNTAX INTEGER {
|
|
local0(0),
|
|
local1(1),
|
|
local2(2),
|
|
local3(3),
|
|
local4(4),
|
|
local5(5),
|
|
local6(6),
|
|
local7(7) }
|
|
|
|
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
-- Managed objects
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
juniLogObjects OBJECT IDENTIFIER ::= { juniLogMIB 1 }
|
|
|
|
juniLogDestinations OBJECT IDENTIFIER ::= { juniLogObjects 1 }
|
|
juniLogCategories OBJECT IDENTIFIER ::= { juniLogObjects 2 }
|
|
juniLogMessages OBJECT IDENTIFIER ::= { juniLogObjects 3 }
|
|
|
|
-- :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
|
|
-- Log Destinations
|
|
-- :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
|
|
juniLogDestSyslog OBJECT IDENTIFIER ::= { juniLogDestinations 1 }
|
|
juniLogDestConsole OBJECT IDENTIFIER ::= { juniLogDestinations 2 }
|
|
juniLogDestNvFile OBJECT IDENTIFIER ::= { juniLogDestinations 3 }
|
|
|
|
--
|
|
-- SYSLOG server log destination
|
|
--
|
|
-- Scalar objects supporting a single syslog destination are obsoleted in favor
|
|
-- of a table of syslog destinations.
|
|
--
|
|
juniLogDestSyslogSeverity OBJECT-TYPE
|
|
SYNTAX JuniLogSeverity
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The minimum severity level of messages sent to the SYSLOG server. A
|
|
value of 'off' indicates no log messages are sent to this destination."
|
|
::= { juniLogDestSyslog 1 }
|
|
|
|
juniLogDestSyslogAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The IP address of the SYSLOG server to which log messages are to be
|
|
sent. A value of 0.0.0.0 indicates no server address is configured."
|
|
::= { juniLogDestSyslog 2 }
|
|
|
|
juniLogSyslogTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JuniLogSyslogEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table describing the characteristics of each syslog destination."
|
|
::= { juniLogDestSyslog 3 }
|
|
|
|
juniLogSyslogEntry OBJECT-TYPE
|
|
SYNTAX JuniLogSyslogEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry describingthe characteristics of a syslog destination."
|
|
INDEX { juniLogSyslogIpAddress }
|
|
::= { juniLogSyslogTable 1 }
|
|
|
|
JuniLogSyslogEntry ::= SEQUENCE {
|
|
juniLogSyslogIpAddress IpAddress,
|
|
juniLogSyslogRowStatus RowStatus,
|
|
juniLogSyslogSeverity JuniLogSeverity,
|
|
juniLogSyslogFacility JuniLogSyslogFacility }
|
|
|
|
juniLogSyslogIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of this syslog destination. This value must be a
|
|
unicast IP address."
|
|
::= { juniLogSyslogEntry 1 }
|
|
|
|
juniLogSyslogRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Controls creation/deletion of entries in this table. Only
|
|
'createAndGo' and 'destroy' are supported."
|
|
::= { juniLogSyslogEntry 2 }
|
|
|
|
juniLogSyslogSeverity OBJECT-TYPE
|
|
SYNTAX JuniLogSeverity
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The severity level for this syslog destination. Setting this value to
|
|
'off' suppresses log messages from being sent to this syslog
|
|
destination."
|
|
DEFVAL { off }
|
|
::= { juniLogSyslogEntry 3 }
|
|
|
|
juniLogSyslogFacility OBJECT-TYPE
|
|
SYNTAX JuniLogSyslogFacility
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The facility id attached to messages sent to this syslog destination."
|
|
DEFVAL { local7 }
|
|
::= { juniLogSyslogEntry 4 }
|
|
|
|
|
|
--
|
|
-- Local console log destination
|
|
--
|
|
juniLogDestConsoleSeverity OBJECT-TYPE
|
|
SYNTAX JuniLogSeverity
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum severity level of messages sent to the console. A value of
|
|
'off' indicates no log messages are sent to this destination."
|
|
::= { juniLogDestConsole 1 }
|
|
|
|
|
|
--
|
|
-- Local nonvolatile file log destination
|
|
--
|
|
juniLogDestNvFileSeverity OBJECT-TYPE
|
|
SYNTAX JuniLogSeverity
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum severity level of messages sent to the nonvolatile log
|
|
file. A value of 'off' indicates no log messages are to be sent to this
|
|
destination."
|
|
::= { juniLogDestNvFile 1 }
|
|
|
|
|
|
-- :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
|
|
-- Log Categories
|
|
-- :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
|
|
juniLogCatScalars OBJECT IDENTIFIER ::= { juniLogCategories 1 }
|
|
-- reserved for attributes pertaining to all logs
|
|
|
|
--
|
|
-- Log Category Table
|
|
--
|
|
juniLogCatTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JuniLogCatEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table describing the characteristics of each log category."
|
|
::= { juniLogCategories 2 }
|
|
|
|
juniLogCatEntry OBJECT-TYPE
|
|
SYNTAX JuniLogCatEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry describing the characteristics of a log category."
|
|
INDEX { juniLogCatIndex }
|
|
::= { juniLogCatTable 1 }
|
|
|
|
JuniLogCatEntry ::= SEQUENCE {
|
|
juniLogCatIndex Integer32,
|
|
juniLogCatName JuniLogCatName,
|
|
juniLogCatDescr DisplayString,
|
|
juniLogCatEngineering TruthValue,
|
|
juniLogCatDiscards Counter32,
|
|
juniLogCatSeverity JuniLogSeverity,
|
|
juniLogCatVerbosity JuniLogVerbosity }
|
|
|
|
juniLogCatIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An integer index uniquely associated with a log.
|
|
|
|
Index values do not necessarily persist across system reboots.
|
|
Following reboot, mappings of (reboot-invariant) log category names to
|
|
log index values is available in the juniLogCatNameTable."
|
|
::= { juniLogCatEntry 1 }
|
|
|
|
juniLogCatName OBJECT-TYPE
|
|
SYNTAX JuniLogCatName
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of this log category."
|
|
::= { juniLogCatEntry 2 }
|
|
|
|
juniLogCatDescr OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A description of the functionality for which events are recorded by
|
|
this log category."
|
|
::= { juniLogCatEntry 3 }
|
|
|
|
juniLogCatEngineering OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An indication of whether this log is intended mainly for engineering
|
|
development and debug purposes."
|
|
::= { juniLogCatEntry 4 }
|
|
|
|
juniLogCatDiscards OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of messages generated by this log category that were
|
|
discarded because of resource limitations."
|
|
::= { juniLogCatEntry 5 }
|
|
|
|
juniLogCatSeverity OBJECT-TYPE
|
|
SYNTAX JuniLogSeverity
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The severity level for this log category.
|
|
|
|
The value 'off' disables recording of this log category's messages. For
|
|
other severity level values, only messages at or above this severity
|
|
level will be logged in juniLogMsgTable."
|
|
::= { juniLogCatEntry 6 }
|
|
|
|
juniLogCatVerbosity OBJECT-TYPE
|
|
SYNTAX JuniLogVerbosity
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The verbosity level for this log category.
|
|
|
|
Supplementary information may be available for certain event types.
|
|
This object controls whether that additional information, if available
|
|
for a given event, is recorded."
|
|
::= { juniLogCatEntry 7}
|
|
|
|
|
|
--
|
|
-- Log Category Name Table
|
|
--
|
|
juniLogCatNameTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JuniLogCatNameEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table mapping each log category's name to its index."
|
|
::= { juniLogCategories 3 }
|
|
|
|
juniLogCatNameEntry OBJECT-TYPE
|
|
SYNTAX JuniLogCatNameEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry mapping a log category's name to its index."
|
|
INDEX { IMPLIED juniLogCatNameName }
|
|
::= { juniLogCatNameTable 1 }
|
|
|
|
JuniLogCatNameEntry ::= SEQUENCE {
|
|
juniLogCatNameName JuniLogCatName,
|
|
juniLogCatNameIndex Integer32 }
|
|
|
|
juniLogCatNameName OBJECT-TYPE
|
|
SYNTAX JuniLogCatName
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of the log category."
|
|
::= { juniLogCatNameEntry 1 }
|
|
|
|
juniLogCatNameIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The log index associated with this log category."
|
|
::= { juniLogCatNameEntry 2 }
|
|
|
|
|
|
-- :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
|
|
-- Log Messages
|
|
-- :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
|
|
--
|
|
-- Log Message Scalars
|
|
--
|
|
juniLogMsgScalars OBJECT IDENTIFIER ::= { juniLogMessages 1 }
|
|
|
|
juniLogMsgCapacity OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "messages"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum capacity, in number of log messages, of the
|
|
juniLogMsgTable."
|
|
::= { juniLogMsgScalars 1 }
|
|
|
|
juniLogMsgLastSeqNumber OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sequence number of the most recent juniLogMsgTable entry.
|
|
|
|
By monitoring this object's rate of change in relation to the
|
|
juniLogMsgTable capacity, a management client can determine whether it
|
|
is polling juniLogMsgTable frequently enough to avoid missing log
|
|
messages."
|
|
::= { juniLogMsgScalars 2 }
|
|
|
|
|
|
--
|
|
-- Log Message Table
|
|
--
|
|
juniLogMsgTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JuniLogMsgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of log messages generated by this device."
|
|
::= { juniLogMessages 2 }
|
|
|
|
juniLogMsgEntry OBJECT-TYPE
|
|
SYNTAX JuniLogMsgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A log message generated by this device."
|
|
INDEX { juniLogMsgSysUpTimeStamp,
|
|
juniLogMsgSequenceNumber }
|
|
::= { juniLogMsgTable 1 }
|
|
|
|
JuniLogMsgEntry ::= SEQUENCE {
|
|
juniLogMsgSysUpTimeStamp TimeStamp,
|
|
juniLogMsgSequenceNumber Unsigned32,
|
|
juniLogMsgCatName JuniLogCatName,
|
|
juniLogMsgCatIndex Integer32,
|
|
juniLogMsgSeverity JuniLogSeverity,
|
|
juniLogMsgText DisplayString,
|
|
juniLogMsgDateAndTimeStamp DateAndTime }
|
|
|
|
juniLogMsgSysUpTimeStamp OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of sysUpTime when this log message was recorded."
|
|
::= { juniLogMsgEntry 1 }
|
|
|
|
juniLogMsgSequenceNumber OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A sequence number that uniquely identifies this entry. Sequence
|
|
numbers are assigned consecutively beginning with 1. More recent
|
|
entries have higher sequence numbers."
|
|
::= { juniLogMsgEntry 2 }
|
|
|
|
juniLogMsgCatName OBJECT-TYPE
|
|
SYNTAX JuniLogCatName
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Name of the log category that contributed this message."
|
|
::= { juniLogMsgEntry 3 }
|
|
|
|
juniLogMsgCatIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index of the log category that contributed this message."
|
|
::= { juniLogMsgEntry 4 }
|
|
|
|
juniLogMsgSeverity OBJECT-TYPE
|
|
SYNTAX JuniLogSeverity
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The severity of the message."
|
|
::= { juniLogMsgEntry 5 }
|
|
|
|
juniLogMsgText OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The text of the log message.
|
|
|
|
Truncation of log message text is indicated by n asterisk character
|
|
('*') in the last octet of a maximum-size string."
|
|
::= { juniLogMsgEntry 6 }
|
|
|
|
juniLogMsgDateAndTimeStamp OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The date and time this message was generated."
|
|
::= { juniLogMsgEntry 7 }
|
|
|
|
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
-- Notification control objects
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
juniLogTrapControl OBJECT IDENTIFIER ::= { juniLogMIB 2 }
|
|
|
|
juniLogMsgThreshold OBJECT-TYPE
|
|
SYNTAX Integer32 (0..100)
|
|
UNITS "percent"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of log messages which, when added to juniLogMsgTable, cause a
|
|
juniLogMsgThresholdTrap to be generated.
|
|
|
|
This value is expressed as a percentage of the capacity of
|
|
juniLogMsgTable. A value of zero disables trap generation."
|
|
::= { juniLogTrapControl 1 }
|
|
|
|
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
-- Notifications
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
-- The following OBJECT IDENTIFIERS is used to define SNMPv2
|
|
-- Notifications that are easily translated into SNMPv1 Traps.
|
|
juniLogTrapPrefix OBJECT IDENTIFIER ::= { juniLogMIB 0 }
|
|
|
|
juniLogMsgThresholdTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
juniLogMsgCapacity,
|
|
juniLogMsgLastSeqNumber,
|
|
juniLogMsgThreshold }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap is generated to report that an incremental number of log
|
|
messages (described by the value of juniLogMsgThreshold) have been added
|
|
to juniLogMsgTable."
|
|
::= { juniLogTrapPrefix 1 }
|
|
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
-- Conformance information
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
juniLogMIBConformance OBJECT IDENTIFIER ::= { juniLogMIB 4 }
|
|
juniLogMIBCompliances OBJECT IDENTIFIER ::= { juniLogMIBConformance 1 }
|
|
juniLogMIBGroups OBJECT IDENTIFIER ::= { juniLogMIBConformance 2 }
|
|
|
|
--
|
|
-- compliance statements
|
|
--
|
|
juniLogCompliance MODULE-COMPLIANCE
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
|
|
"Obsolete compliance statement for entities which implement the Juniper
|
|
Networks Log MIB. This statement became obsolete when support for
|
|
multiple SYSLOGs was added."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
juniLogGroup }
|
|
::= { juniLogMIBCompliances 1 } -- JUNOSe 1.3
|
|
|
|
juniLogCompliance2 MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for entities which implement the Juniper
|
|
Networks Log MIB, including support for multiple SYSLOG destinations."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
juniLogGroup2,
|
|
juniLogTrapGroup }
|
|
::= { juniLogMIBCompliances 2 } -- JUNOSe 2.0
|
|
|
|
--
|
|
-- units of conformance
|
|
--
|
|
juniLogGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
-- log destinations
|
|
juniLogDestSyslogSeverity,
|
|
juniLogDestSyslogAddress,
|
|
juniLogDestConsoleSeverity,
|
|
juniLogDestNvFileSeverity,
|
|
|
|
-- log categories
|
|
juniLogCatName,
|
|
juniLogCatDescr,
|
|
juniLogCatEngineering,
|
|
juniLogCatDiscards,
|
|
juniLogCatSeverity,
|
|
juniLogCatVerbosity,
|
|
|
|
-- log category names
|
|
juniLogCatNameName,
|
|
juniLogCatNameIndex,
|
|
|
|
-- log message scalars
|
|
juniLogMsgCapacity,
|
|
juniLogMsgLastSeqNumber,
|
|
|
|
-- log messages
|
|
juniLogMsgCatName,
|
|
juniLogMsgCatIndex,
|
|
juniLogMsgSeverity,
|
|
juniLogMsgText,
|
|
juniLogMsgDateAndTimeStamp,
|
|
|
|
-- trap control
|
|
juniLogMsgThreshold }
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Obsolete collection of objects providing management of Juniper Networks
|
|
logging capabilities. This group became obsolete when support for
|
|
multiple SYSLOGs was added."
|
|
::= { juniLogMIBGroups 1 }
|
|
|
|
juniLogGroup2 OBJECT-GROUP
|
|
OBJECTS {
|
|
-- log destinations
|
|
juniLogSyslogRowStatus,
|
|
juniLogSyslogSeverity,
|
|
juniLogSyslogFacility,
|
|
juniLogDestConsoleSeverity,
|
|
juniLogDestNvFileSeverity,
|
|
|
|
-- log categories
|
|
juniLogCatName,
|
|
juniLogCatDescr,
|
|
juniLogCatEngineering,
|
|
juniLogCatDiscards,
|
|
juniLogCatSeverity,
|
|
juniLogCatVerbosity,
|
|
|
|
-- log category names
|
|
juniLogCatNameName,
|
|
juniLogCatNameIndex,
|
|
|
|
-- log message scalars
|
|
juniLogMsgCapacity,
|
|
juniLogMsgLastSeqNumber,
|
|
|
|
-- log messages
|
|
juniLogMsgCatName,
|
|
juniLogMsgCatIndex,
|
|
juniLogMsgSeverity,
|
|
juniLogMsgText,
|
|
juniLogMsgDateAndTimeStamp,
|
|
|
|
-- trap control
|
|
juniLogMsgThreshold }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing management of Juniper Networks
|
|
logging capabilities, including support for multiple SYSLOG
|
|
destinations."
|
|
::= { juniLogMIBGroups 2 }
|
|
|
|
juniLogTrapGroup NOTIFICATION-GROUP
|
|
NOTIFICATIONS {
|
|
juniLogMsgThresholdTrap }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A management notification pertaining to logging operations."
|
|
::= { juniLogMIBGroups 3 }
|
|
|
|
END
|