1746 lines
63 KiB
Plaintext
1746 lines
63 KiB
Plaintext
|
|
-- *****************************************************************************
|
|
-- Juniper-PIM-MIB
|
|
--
|
|
-- Juniper Networks Enterprise MIB
|
|
-- Protocol Independent Multicast (PIM) MIB
|
|
--
|
|
-- Copyright (c) 2001 Unisphere Networks, Inc.
|
|
-- Copyright (c) 2002 Juniper Networks, Inc.
|
|
-- All Rights Reserved.
|
|
-- *****************************************************************************
|
|
|
|
Juniper-PIM-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, Integer32, IpAddress, TimeTicks
|
|
FROM SNMPv2-SMI
|
|
RowStatus, TruthValue, TEXTUAL-CONVENTION
|
|
FROM SNMPv2-TC
|
|
MODULE-COMPLIANCE, OBJECT-GROUP
|
|
FROM SNMPv2-CONF
|
|
pimInterfaceIfIndex, pimRPSetComponent, pimRPSetGroupAddress,
|
|
pimRPSetGroupMask, pimRPSetAddress
|
|
FROM PIM-MIB
|
|
InterfaceIndex
|
|
FROM IF-MIB
|
|
juniMibs
|
|
FROM Juniper-MIBs;
|
|
|
|
juniPimMIB MODULE-IDENTITY
|
|
LAST-UPDATED "200209162144Z" -- 16-Sep-02 05:44 PM EDT
|
|
ORGANIZATION "Juniper Networks, Inc."
|
|
CONTACT-INFO
|
|
" Juniper Networks, Inc.
|
|
Postal: 10 Technology Park Drive
|
|
Westford, MA 01886-3146
|
|
USA
|
|
Tel: +1 978 589 5800
|
|
Email: mib@Juniper.net"
|
|
DESCRIPTION
|
|
"The enterprise MIB module for management of PIM routers."
|
|
-- Revision History
|
|
REVISION "200209162144Z" -- 16-Sep-02 05:44 PM EDT - JUNOSe 5.0
|
|
DESCRIPTION
|
|
"Replaced Unisphere names with Juniper names."
|
|
REVISION "200103191537Z" -- 19-Mar-01 10:37 AM EST - JUNOSe 3.0
|
|
DESCRIPTION
|
|
"Initial enterprise version."
|
|
::= { juniMibs 43 }
|
|
|
|
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
-- Textual conventions
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
JuniPimType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This data type is used do identify Sparse mode and Dense mode PIM
|
|
protocol."
|
|
SYNTAX INTEGER {
|
|
invalid(0), -- not valid value
|
|
dense(1), -- dense mode PIM
|
|
sparse(2), -- sparse mode PIM
|
|
sparseAndDense(3) } -- both sparse and dense mode PIM
|
|
|
|
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
-- Managed objects
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
juniPimMIBObjects OBJECT IDENTIFIER ::= { juniPimMIB 1 }
|
|
juniPimTraps OBJECT IDENTIFIER ::= { juniPimMIBObjects 0 }
|
|
juniPimGlobal OBJECT IDENTIFIER ::= { juniPimMIBObjects 1 }
|
|
|
|
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
-- Pim General Group
|
|
--
|
|
-- NOTE: RowStatus rowStatus. This needs to go into virtual-router
|
|
-- MIB table so that we can create/destroy PIM
|
|
--
|
|
-- PimPktStats: these actually augment the general group of standard MIB
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
juniPimNumHelloRcvd OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of Hellos received by PIM on this router."
|
|
::= { juniPimGlobal 1 }
|
|
|
|
juniPimNumJoinPruneRcvd OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of JoinPrunes received by PIM on this router."
|
|
::= { juniPimGlobal 2 }
|
|
|
|
juniPimNumAssertRcvd OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of Asserts received by PIM on this router."
|
|
::= { juniPimGlobal 3 }
|
|
|
|
juniPimNumGraftRcvd OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of Grafts received by PIM on this router."
|
|
::= { juniPimGlobal 4 }
|
|
|
|
juniPimNumGraftAckRcvd OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of Graft Acks received by PIM on this router."
|
|
::= { juniPimGlobal 5 }
|
|
|
|
juniPimNumHelloSent OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of Hellos sent by PIM on this router."
|
|
::= { juniPimGlobal 6 }
|
|
|
|
juniPimNumJoinPruneSent OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of JoinPrunes sent by PIM on this router."
|
|
::= { juniPimGlobal 7 }
|
|
|
|
juniPimNumAssertSent OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of Asserts sent by PIM on this router."
|
|
::= { juniPimGlobal 8 }
|
|
|
|
juniPimNumGraftSent OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of Grafts sent by PIM on this router."
|
|
::= { juniPimGlobal 9 }
|
|
|
|
juniPimNumGraftAckSent OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of Graft Acks sent by PIM on this router."
|
|
::= { juniPimGlobal 10 }
|
|
|
|
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
-- Pim Interface Table
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
juniPimInterfaceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JuniPimInterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table listing enterprise specific information on a
|
|
subset of the rows of the pimInterfaceTable defined in the standard PIM
|
|
MIB."
|
|
::= { juniPimGlobal 11 }
|
|
|
|
juniPimInterfaceEntry OBJECT-TYPE
|
|
SYNTAX JuniPimInterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) in the juniPimInterfaceTable. There is one
|
|
entry per entry in the pimInterfaceTable."
|
|
INDEX { pimInterfaceIfIndex }
|
|
::= { juniPimInterfaceTable 1 }
|
|
|
|
JuniPimInterfaceEntry ::= SEQUENCE {
|
|
juniPimIntfNumHelloRcvd Integer32,
|
|
juniPimIntfNumJoinPruneRcvd Integer32,
|
|
juniPimIntfNumAssertRcvd Integer32,
|
|
juniPimIntfNumGraftRcvd Integer32,
|
|
juniPimIntfNumGraftAckRcvd Integer32,
|
|
juniPimIntfNumHelloSent Integer32,
|
|
juniPimIntfNumJoinPruneSent Integer32,
|
|
juniPimIntfNumAssertSent Integer32,
|
|
juniPimIntfNumGraftSent Integer32,
|
|
juniPimIntfNumGraftAckSent Integer32,
|
|
juniPimIntfVersion INTEGER,
|
|
juniPimIntfNumNbrs Integer32 }
|
|
|
|
juniPimIntfNumHelloRcvd OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of Hellos received by PIM on this interface. It can only
|
|
be cleared to 0 when doing set. Setting this also sets counters for
|
|
other types of packets to 0."
|
|
::= { juniPimInterfaceEntry 1 }
|
|
|
|
juniPimIntfNumJoinPruneRcvd OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of JoinPrunes received by PIM on this interface. It can
|
|
only be cleared to 0 when doing set. Setting this also sets counters
|
|
for other types of packets to 0."
|
|
::= { juniPimInterfaceEntry 2 }
|
|
|
|
juniPimIntfNumAssertRcvd OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of Asserts received by PIM on this interface. It can only
|
|
be cleared to 0 when doing set. Setting this also sets counters for
|
|
other types of packets to 0."
|
|
::= { juniPimInterfaceEntry 3 }
|
|
|
|
juniPimIntfNumGraftRcvd OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of Grafts received by PIM on this interface. It can only
|
|
be cleared to 0 when doing set. Setting this also sets counters for
|
|
other types of packets to 0."
|
|
::= { juniPimInterfaceEntry 4 }
|
|
|
|
juniPimIntfNumGraftAckRcvd OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of Graft Acks received by PIM on this interface. It can
|
|
only be cleared to 0 when doing set. Setting this also sets counters
|
|
for other types of packets to 0."
|
|
::= { juniPimInterfaceEntry 5 }
|
|
|
|
juniPimIntfNumHelloSent OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of Hellos sent by PIM on this interface. It can only be
|
|
cleared to 0 when doing set. Setting this also sets counters for other
|
|
types of packets to 0."
|
|
::= { juniPimInterfaceEntry 6 }
|
|
|
|
juniPimIntfNumJoinPruneSent OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of JoinPrunes sent by PIM on this interface. It can only
|
|
be cleared to 0 when doing set. Setting this also sets counters for
|
|
other types of packets to 0."
|
|
::= { juniPimInterfaceEntry 7 }
|
|
|
|
juniPimIntfNumAssertSent OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of Asserts sent by PIM on this interface. It can only be
|
|
cleared to 0 when doing set. Setting this also sets counters for other
|
|
types of packets to 0."
|
|
::= { juniPimInterfaceEntry 8 }
|
|
|
|
juniPimIntfNumGraftSent OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of Grafts sent by PIM on this interface. It can only be
|
|
cleared to 0 when doing set. Setting this also sets counters for other
|
|
types of packets to 0."
|
|
::= { juniPimInterfaceEntry 9 }
|
|
|
|
juniPimIntfNumGraftAckSent OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of Graft Acks sent by PIM on this interface. It can only
|
|
be cleared to 0 when doing set. Setting this also sets counters for
|
|
other types of packets to 0."
|
|
::= { juniPimInterfaceEntry 10 }
|
|
|
|
juniPimIntfVersion OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The version of PIM running on this interface."
|
|
::= { juniPimInterfaceEntry 11 }
|
|
|
|
juniPimIntfNumNbrs OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of PIM neighbors detected on this interface."
|
|
::= { juniPimInterfaceEntry 12 }
|
|
|
|
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
-- The PIM Multicast Route Table
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
juniPimMRouteTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JuniPimMRouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table listing PIM multicast routing information
|
|
describing its <*, *, RP>/ <*, G>/ <S, G> states."
|
|
::= { juniPimGlobal 12 }
|
|
|
|
juniPimMRouteEntry OBJECT-TYPE
|
|
SYNTAX JuniPimMRouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) in the juniPimMRouteTable."
|
|
INDEX { juniPimMRouteGroup,
|
|
juniPimMRouteSource,
|
|
juniPimMRouteSourceMask,
|
|
juniPimMRouteRPAddress }
|
|
::= { juniPimMRouteTable 1 }
|
|
|
|
JuniPimMRouteEntry ::= SEQUENCE {
|
|
juniPimMRouteGroup IpAddress,
|
|
juniPimMRouteSource IpAddress,
|
|
juniPimMRouteSourceMask IpAddress,
|
|
juniPimMRouteRPAddress IpAddress,
|
|
juniPimMRouteUpstreamAssertTimer TimeTicks,
|
|
juniPimMRouteAssertMetric Integer32,
|
|
juniPimMRouteAssertPref Integer32,
|
|
juniPimMRouteAssertRPTBit TruthValue,
|
|
juniPimMRouteBits BITS,
|
|
juniPimMRouteRPAddrInUse IpAddress,
|
|
juniPimMRouteUpstreamNbr IpAddress,
|
|
juniPimMRouteIifAddr IpAddress,
|
|
juniPimMRouteIsWaitingToSwitchToSPT TruthValue,
|
|
juniPimMRouteEntryExpiryTimer TimeTicks,
|
|
juniPimMRouteSenderDRAddr IpAddress,
|
|
juniPimMRouteRouteAddr IpAddress,
|
|
juniPimMRouteRouteMask IpAddress,
|
|
juniPimMRouteGRPAddr IpAddress,
|
|
juniPimMRouteGRPMask IpAddress,
|
|
juniPimMRouteOtherProtoOifJoinTypeAll TruthValue,
|
|
juniPimMRouteOtherProtoOifJoinTypeG TruthValue,
|
|
juniPimMRouteOtherProtoOifJoinTypeSG TruthValue,
|
|
juniPimMRoutePimType JuniPimType }
|
|
|
|
juniPimMRouteGroup OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The group address. Specified as 224.0.0.0 for <*, *, RP> entries."
|
|
::= { juniPimMRouteEntry 1 }
|
|
|
|
juniPimMRouteSource OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The source address. Specified as 0.0.0.0 for <*, *, RP> and <*, G>
|
|
entries."
|
|
::= { juniPimMRouteEntry 2 }
|
|
|
|
juniPimMRouteSourceMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The source address mask. Specified as 255.255.255.255 for <S, G>
|
|
entries and 0.0.0.0 for <*, *, RP> and <*, G> entries."
|
|
::= { juniPimMRouteEntry 3 }
|
|
|
|
juniPimMRouteRPAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The RP address used for <*, *, RP>. Specified as 0.0.0.0 for <S, G>
|
|
and <*, G> entries."
|
|
::= { juniPimMRouteEntry 4 }
|
|
|
|
juniPimMRouteUpstreamAssertTimer OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time remaining before the router changes its upstream neighbor back
|
|
to its RPF neighbor. This timer is called the Assert timer in the PIM
|
|
Sparse and Dense mode specification. A value of 0 indicates that no
|
|
Assert has changed the upstream neighbor away from the RPF neighbor."
|
|
::= { juniPimMRouteEntry 5 }
|
|
|
|
juniPimMRouteAssertMetric OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The metric advertised by the assert winner on the upstream interface,
|
|
or 0 if no such assert is in received."
|
|
::= { juniPimMRouteEntry 6 }
|
|
|
|
juniPimMRouteAssertPref OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The preference advertised by the assert winner on the upstream
|
|
interface, or 0 if no such assert is in effect."
|
|
::= { juniPimMRouteEntry 7 }
|
|
|
|
juniPimMRouteAssertRPTBit OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of the RPT-bit advertised by the assert winner on the
|
|
upstream interface, or false if no such assert is in effect."
|
|
::= { juniPimMRouteEntry 8 }
|
|
|
|
juniPimMRouteBits OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
rpt(0),
|
|
spt(1) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes whether the entry is on shared tree (RPT) or
|
|
shortest path tree (SPT)."
|
|
::= { juniPimMRouteEntry 9 }
|
|
|
|
juniPimMRouteRPAddrInUse OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The RP Address being used for the <S, G>RPT/<*, G>/<*, *, RP> entries.
|
|
Set to 0.0.0.0 for <S, G> entries on shortest path tree."
|
|
::= { juniPimMRouteEntry 10 }
|
|
|
|
juniPimMRouteUpstreamNbr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The address of upstream neighbor being used for the entry. Its set to
|
|
0.0.0.0 if the router is directly attached to source on one of its
|
|
interface. "
|
|
::= { juniPimMRouteEntry 11 }
|
|
|
|
juniPimMRouteIifAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The address of incoming interface for this entry."
|
|
::= { juniPimMRouteEntry 12 }
|
|
|
|
juniPimMRouteIsWaitingToSwitchToSPT OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
"This object describes whether the entry is still waiting to switch
|
|
completely to shortest path tree in case of <S, G> entries. It waits to
|
|
do this till it receives first packet from incoming interface towards
|
|
shortest path tree."
|
|
::= { juniPimMRouteEntry 13 }
|
|
|
|
juniPimMRouteEntryExpiryTimer OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time after which the entry timer expires for this entry. Set to 0
|
|
if entry timer is not active."
|
|
::= { juniPimMRouteEntry 14 }
|
|
|
|
juniPimMRouteSenderDRAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The address of the designated router on the sender's subnet in case of
|
|
<S, G> entries. The sender designated router register encapsulates data
|
|
to RP. Set to 0.0.0.0 for <*, G> and <*, *, RP> entries."
|
|
::= { juniPimMRouteEntry 15 }
|
|
|
|
juniPimMRouteRouteAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The address of the route being used to do RPF check for this entry. It
|
|
is set to 0.0.0.0 (with juniPimMRouteRouteMask set to 255.255.255.255)
|
|
if there is no route available."
|
|
::= { juniPimMRouteEntry 16 }
|
|
|
|
juniPimMRouteRouteMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mask of the route being used to do RPF check for this entry. It is
|
|
set to 255.255.255.255 (with juniPimMRouteRoute set to 0.0.0.0) if there
|
|
is no route available."
|
|
::= { juniPimMRouteEntry 17 }
|
|
|
|
juniPimMRouteGRPAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The address of the group-to-RP mapping being used to get the RP for
|
|
this entry. It is set to 0.0.0.0 (with juniPimMRouteGRPMask set to
|
|
0.0.0.0) if there is no group-to-RP mapping available or if entry is <*,
|
|
*, RP>."
|
|
::= { juniPimMRouteEntry 18 }
|
|
|
|
juniPimMRouteGRPMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mask of the group-to-RP mapping being used to get the RP for this
|
|
entry. It is set to 255.255.255.255 (with juniPimMRouteGRPAddr set to
|
|
0.0.0.0) if there is no group-to-RP mapping available or if entry is <*,
|
|
*, RP>."
|
|
::= { juniPimMRouteEntry 19 }
|
|
|
|
juniPimMRouteOtherProtoOifJoinTypeAll OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates if some other multicast protocol is also
|
|
interested in receiving data for this entry as a result of its interest
|
|
in receiving all data. This will be particularly true for dense mode
|
|
protocols which would want all data (<*, *>) from PIM sparse mode
|
|
protocol."
|
|
::= { juniPimMRouteEntry 20 }
|
|
|
|
juniPimMRouteOtherProtoOifJoinTypeG OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates if some other multicast protocol is also
|
|
interested in receiving data for this entry as a result of its interest
|
|
in receiving data for a given group. This will be particularly true for
|
|
IGMP which would want data for a given group (<*, G>) from PIM
|
|
protocol."
|
|
::= { juniPimMRouteEntry 21 }
|
|
|
|
juniPimMRouteOtherProtoOifJoinTypeSG OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates if some other multicast protocol is also
|
|
interested in receiving data for this entry as a result of its interest
|
|
in receiving data for a given <source, group>. This will be
|
|
particularly true for IGMPv3 which would want data for a given <source,
|
|
group (<S, G>) from PIM sparse-mode protocol."
|
|
::= { juniPimMRouteEntry 22 }
|
|
|
|
juniPimMRoutePimType OBJECT-TYPE
|
|
SYNTAX JuniPimType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates if the owner of this entry is Sparse mode or
|
|
Dense mode PIM. Owner is usually determined by the protocol running on
|
|
the incoming interface of the entry. In case sparse-dense mode PIM is
|
|
running on the incoming interface, sparse-mode is the owner if RP for
|
|
the group is known, else dense mode is the owner."
|
|
::= { juniPimMRouteEntry 23 }
|
|
|
|
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
-- The PIM Next Hop Table
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
juniPimMRouteNextHopTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JuniPimMRouteNextHopEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table listing PIM multicast routing information
|
|
describing its <*, *, RP>/ <*, G>/ <S, G> outgoing interfaces."
|
|
::= { juniPimGlobal 13 }
|
|
|
|
juniPimMRouteNextHopEntry OBJECT-TYPE
|
|
SYNTAX JuniPimMRouteNextHopEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) in the juniPimMRouteNextHopTable."
|
|
INDEX { juniPimMRouteNextHopGroupAddr,
|
|
juniPimMRouteNextHopSrcAddr,
|
|
juniPimMRouteNextHopSrcMask,
|
|
juniPimMRouteNextHopRPAddr,
|
|
juniPimMRouteNextHopIfId,
|
|
juniPimMRouteNextHopAddress }
|
|
::= { juniPimMRouteNextHopTable 1 }
|
|
|
|
JuniPimMRouteNextHopEntry ::= SEQUENCE {
|
|
juniPimMRouteNextHopGroupAddr IpAddress,
|
|
juniPimMRouteNextHopSrcAddr IpAddress,
|
|
juniPimMRouteNextHopSrcMask IpAddress,
|
|
juniPimMRouteNextHopRPAddr IpAddress,
|
|
juniPimMRouteNextHopIfId InterfaceIndex,
|
|
juniPimMRouteNextHopAddress IpAddress,
|
|
juniPimMRouteNextHopPruneReason INTEGER,
|
|
juniPimMRouteNextHopJoinTypeSSRP TruthValue,
|
|
juniPimMRouteNextHopJoinTypeG TruthValue,
|
|
juniPimMRouteNextHopJoinTypeSG TruthValue,
|
|
juniPimMRouteNextHopHasLGM TruthValue,
|
|
juniPimMRouteNextHopHasOifAW TruthValue,
|
|
juniPimMRouteNextHopHasOifSendAssert TruthValue,
|
|
juniPimMRouteNextHopHasOifRegister TruthValue,
|
|
juniPimMRouteNextHopHasOifBorderBit TruthValue,
|
|
juniPimMRouteNextHopHasOifNullEncapsBit TruthValue,
|
|
juniPimMRouteNextHopJoinEndTimer TimeTicks,
|
|
juniPimMRouteNextHopAssertEndTimer TimeTicks,
|
|
juniPimMRouteNextHopNextAssertTimer TimeTicks,
|
|
juniPimMRouteNextHopAssertSrcAddress IpAddress,
|
|
juniPimMRouteNextHopRegisterSuppressionTimer TimeTicks,
|
|
juniPimMRouteNextHopPimType JuniPimType,
|
|
juniPimMRouteNextHopPruneTimeLeft TimeTicks,
|
|
juniPimMRouteNextHopsendingIpAddress IpAddress }
|
|
|
|
juniPimMRouteNextHopGroupAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The group address. Specified as 224.0.0.0 for <*, *, RP> entries."
|
|
::= { juniPimMRouteNextHopEntry 2 }
|
|
|
|
juniPimMRouteNextHopSrcAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The source address. Specified as 0.0.0.0 for <*, *, RP> and <*, G>
|
|
entries."
|
|
::= { juniPimMRouteNextHopEntry 3 }
|
|
|
|
juniPimMRouteNextHopSrcMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The source address mask. Specified as 255.255.255.255 for <S, G>
|
|
entries and 0.0.0.0 for <*, *, RP> and <*, G> entries."
|
|
::= { juniPimMRouteNextHopEntry 4 }
|
|
|
|
juniPimMRouteNextHopRPAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The RP address used for <*, *, RP>. Specified as 0.0.0.0 for <S, G> and
|
|
<*, G> entries."
|
|
::= { juniPimMRouteNextHopEntry 5 }
|
|
|
|
juniPimMRouteNextHopIfId OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface index of the outgoing interface (next hop). Specified as
|
|
0 for register outgoing interface. Register outgoing interfaces are
|
|
created by DR on the source subnet to send PIM register encapsulated
|
|
data (as unicast) to RP. It is also used by PIM boundary routers
|
|
(PMBRs) to register data to RP."
|
|
::= { juniPimMRouteNextHopEntry 6 }
|
|
|
|
juniPimMRouteNextHopAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object takes following different values based on the type of next
|
|
hop. It should be set to the address of RP in case the next hop
|
|
interface is register interface i.e. juniPimMRouteNextHopIfId object is
|
|
set to 0. It should be set to the address of neighbor in case the
|
|
interface is an NBMA interface. In all other cases it should be set to
|
|
the group address itself."
|
|
::= { juniPimMRouteNextHopEntry 7 }
|
|
|
|
juniPimMRouteNextHopPruneReason OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
prune(2),
|
|
assert(3) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates why the downstream interface was pruned, whether
|
|
in response to a PIM prune message or due to PIM Assert processing."
|
|
::= { juniPimMRouteNextHopEntry 8 }
|
|
|
|
juniPimMRouteNextHopJoinTypeSSRP OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates whether or not the interface was added as a
|
|
result of receiving <*, *, RP> join in case of <*, *, RP> entry OR
|
|
inherited as outgoing interface from corresponding <*, *, RP> entry in
|
|
case of <*, G> entry."
|
|
::= { juniPimMRouteNextHopEntry 9 }
|
|
|
|
juniPimMRouteNextHopJoinTypeG OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates whether or not the interface was added as a
|
|
result of receiving <*, G> join in case of <*, G> entry OR inherited as
|
|
outgoing interface from corresponding <*, G> entry in case of <S, G>
|
|
entry."
|
|
::= { juniPimMRouteNextHopEntry 10 }
|
|
|
|
juniPimMRouteNextHopJoinTypeSG OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates whether or not the interface was added as a
|
|
result of receiving <S, G> join in case of <S, G> entry."
|
|
::= { juniPimMRouteNextHopEntry 11 }
|
|
|
|
juniPimMRouteNextHopHasLGM OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates whether or not the interface has local group
|
|
membership (as indicated by IGMP) in case of <*, G> and <S, G> entries."
|
|
::= { juniPimMRouteNextHopEntry 12 }
|
|
|
|
juniPimMRouteNextHopHasOifAW OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates whether or not this interface is the winner of
|
|
assert for corresponding <*, G>/<S, G> entry."
|
|
::= { juniPimMRouteNextHopEntry 13 }
|
|
|
|
juniPimMRouteNextHopHasOifSendAssert OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates whether or not this interface is going to send an
|
|
assert at the end of assert suppression interval. Assert suppression is
|
|
used to prevent a flood of assert to be generated in response to data or
|
|
other asserts."
|
|
::= { juniPimMRouteNextHopEntry 14 }
|
|
|
|
juniPimMRouteNextHopHasOifRegister OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates whether or not this next hop is a register
|
|
outgoing interface."
|
|
::= { juniPimMRouteNextHopEntry 15 }
|
|
|
|
juniPimMRouteNextHopHasOifBorderBit OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to describe a register outgoing interface. It
|
|
indicates whether or not the border bit is set in the register packet
|
|
when the packet is sent over the register interface. For all other
|
|
(non-register) interfaces its set to false."
|
|
::= { juniPimMRouteNextHopEntry 16 }
|
|
|
|
juniPimMRouteNextHopHasOifNullEncapsBit OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to describe a register outgoing interface. It
|
|
indicates whether or not the NULL encapsulation bit is set
|
|
(periodically) in the register packet when the packet is sent over the
|
|
register interface. For all other (non-register) interfaces its set to
|
|
false."
|
|
::= { juniPimMRouteNextHopEntry 17 }
|
|
|
|
juniPimMRouteNextHopJoinEndTimer OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the time (in seconds) left when the join timer
|
|
expires for the outgoing interface. Join timer for an outgoing
|
|
interface of <S, G> entry indicates when the <S, G> join expires, for a
|
|
<*, G> entry indicates when the <*, G> join expires and for a <*, *, RP>
|
|
entry indicates when the <*, *, RP> join expires. Inherited joins (like
|
|
<S, G> inheriting from <*, G> AND <*, G> inheriting from <*, *, RP>)
|
|
expire when the corresponding parent join expires."
|
|
::= { juniPimMRouteNextHopEntry 18 }
|
|
|
|
juniPimMRouteNextHopAssertEndTimer OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the time (in seconds) left when the assert timer
|
|
expires on this outgoing inteface."
|
|
::= { juniPimMRouteNextHopEntry 19 }
|
|
|
|
juniPimMRouteNextHopNextAssertTimer OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the duration (in seconds) left for which sending
|
|
an assert has been suppressed on this outgoing interface."
|
|
::= { juniPimMRouteNextHopEntry 20 }
|
|
|
|
juniPimMRouteNextHopAssertSrcAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the source address which will be used in the
|
|
assert packet to send an assert out for the entry on this outgoing
|
|
interface. For <S, G> entries it is the address of the source S itself.
|
|
For <*, G> entries it is the address of the source whose data was
|
|
forwarded using this <*, G> and caused the assert situation to happen."
|
|
::= { juniPimMRouteNextHopEntry 21 }
|
|
|
|
juniPimMRouteNextHopRegisterSuppressionTimer OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used for register outgoing interfaces. It indicates the
|
|
duration (in seconds) left for which sending a register packet has been
|
|
suppressed on the register outgoing interface as a result of receiving
|
|
register-stop from the RP."
|
|
::= { juniPimMRouteNextHopEntry 22 }
|
|
|
|
juniPimMRouteNextHopPimType OBJECT-TYPE
|
|
SYNTAX JuniPimType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates whether the outgoing interface was contributed by
|
|
sparse-mode or dense-mode PIM."
|
|
::= { juniPimMRouteNextHopEntry 23 }
|
|
|
|
juniPimMRouteNextHopPruneTimeLeft OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the time (in seconds) left when the prune timer
|
|
expires on an outgoing inteface. Its used for pruned outgoing
|
|
interfaces contributed by dense-mode PIM."
|
|
::= { juniPimMRouteNextHopEntry 24 }
|
|
|
|
juniPimMRouteNextHopsendingIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes the source IP address used by this interface to
|
|
send PIM packets out on this outgoing interface."
|
|
::= { juniPimMRouteNextHopEntry 25 }
|
|
|
|
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
-- The PIM RP-Set Table
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
juniPimRPSetTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JuniPimRPSetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table listing enterprise specific information on a
|
|
subset of the rows of the pimRPSetTable defined in the standard PIM
|
|
MIB."
|
|
::= { juniPimGlobal 14 }
|
|
|
|
juniPimRPSetEntry OBJECT-TYPE
|
|
SYNTAX JuniPimRPSetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) in the juniPimRPSetTable."
|
|
INDEX { pimRPSetComponent,
|
|
pimRPSetGroupAddress,
|
|
pimRPSetGroupMask,
|
|
pimRPSetAddress }
|
|
::= { juniPimRPSetTable 1 }
|
|
|
|
JuniPimRPSetEntry ::= SEQUENCE {
|
|
juniPimRPSetPriority Integer32,
|
|
juniPimRPSetTypeInfo INTEGER,
|
|
juniPimRPSetAccessListName OCTET STRING }
|
|
|
|
juniPimRPSetPriority OBJECT-TYPE
|
|
SYNTAX Integer32 (1..'FFFF'h)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes the priority of the RP for this group-to-RP
|
|
mapping."
|
|
::= { juniPimRPSetEntry 1 }
|
|
|
|
juniPimRPSetTypeInfo OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
pimRPTypeInvalid(0),
|
|
pimRPTypeStatic(1),
|
|
pimRPTypeStaticOverride(2),
|
|
pimRPTypeAutoRP(3),
|
|
pimRPTypeBSR(4),
|
|
pimRPTypeStaticNegative(5),
|
|
pimRPTypeStaticOverrideNegative(6),
|
|
pimRPTypeAutoRPNegative(7),
|
|
pimRPTypeBSRNegative(8) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes the mechanism by which this group to RP mapping
|
|
has been learnt, i.e. whether its statically configured, AutoRP learnt
|
|
or BSR learnt. It also indicates whether the mapping is positive or
|
|
negative. Negative mappings force the groups in that range to fall into
|
|
dense-mode category if sparse-dense mode is configured or no RP if its
|
|
purely sparse mode configuration."
|
|
::= { juniPimRPSetEntry 2 }
|
|
|
|
juniPimRPSetAccessListName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object lists the name of the access list from which this
|
|
group-to-RP mapping was picked up in case of statically configured
|
|
RPs."
|
|
::= { juniPimRPSetEntry 3 }
|
|
|
|
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
-- The PIM Static RP configuration table
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
juniPimStaticRPConfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JuniPimStaticRPConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table listing statically configured PIM RPs."
|
|
::= { juniPimGlobal 15 }
|
|
|
|
juniPimStaticRPConfEntry OBJECT-TYPE
|
|
SYNTAX JuniPimStaticRPConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) in the juniPimStaticRPConfTable."
|
|
INDEX { juniPimStaticRPConfComponentIndex,
|
|
juniPimStaticRPConfRPAddr,
|
|
juniPimStaticRPConfAccessListName }
|
|
::= { juniPimStaticRPConfTable 1 }
|
|
|
|
JuniPimStaticRPConfEntry ::= SEQUENCE {
|
|
juniPimStaticRPConfComponentIndex Integer32,
|
|
juniPimStaticRPConfRPAddr IpAddress,
|
|
juniPimStaticRPConfAccessListName OCTET STRING,
|
|
juniPimStaticRPConfRowStatus RowStatus,
|
|
juniPimStaticRPConfOverride TruthValue }
|
|
|
|
juniPimStaticRPConfComponentIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A number uniquely identifying the component. Each protocol instance
|
|
connected to a separate domain should have a different index value."
|
|
::= { juniPimStaticRPConfEntry 1 }
|
|
|
|
juniPimStaticRPConfRPAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Ip address of the RP which for the group-to-RP mapping being
|
|
configured."
|
|
::= { juniPimStaticRPConfEntry 2 }
|
|
|
|
juniPimStaticRPConfAccessListName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..32))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Name of the access list from which group-ranges are picked up for this
|
|
group-ro-RP mapping. Every deny component in the list is added as
|
|
negative group-ro-RP mapping."
|
|
::= { juniPimStaticRPConfEntry 3 }
|
|
|
|
juniPimStaticRPConfRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this row, by which new entries may be created, or old
|
|
entries deleted from this table."
|
|
::= { juniPimStaticRPConfEntry 4 }
|
|
|
|
juniPimStaticRPConfOverride OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object indicates whether or not this statically configured
|
|
group-to-RP mapping should override the group-to-RP mapping learnt via
|
|
AutoRP for the component group-ranges in the access list. By default
|
|
AutoRP learnt group-to-RP mappings are preferred over statically
|
|
configured ones. While setting the rowStatus to create a static RP,
|
|
this field should be assigned to true if the override property is
|
|
desired."
|
|
DEFVAL { false }
|
|
::= { juniPimStaticRPConfEntry 5 }
|
|
|
|
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
-- The PIM AutoRP Candidate RP configuration table
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
juniPimAutoRPConfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JuniPimAutoRPConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table allowing AutoRP configuration of candidate RPs
|
|
(advertisement agents)."
|
|
::= { juniPimGlobal 16 }
|
|
|
|
juniPimAutoRPConfEntry OBJECT-TYPE
|
|
SYNTAX JuniPimAutoRPConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) in the juniPimAutoRPConfTable."
|
|
INDEX { juniPimAutoRPConfComponentIndex,
|
|
juniPimAutoRPConfCandRPAddr,
|
|
juniPimAutoRPConfGroupAccessListName }
|
|
::= { juniPimAutoRPConfTable 1 }
|
|
|
|
JuniPimAutoRPConfEntry ::= SEQUENCE {
|
|
juniPimAutoRPConfComponentIndex Integer32,
|
|
juniPimAutoRPConfCandRPAddr IpAddress,
|
|
juniPimAutoRPConfGroupAccessListName OCTET STRING,
|
|
juniPimAutoRPConfRowStatus RowStatus,
|
|
juniPimAutoRPConfTTL Integer32,
|
|
juniPimAutoRPConfAncmntIntvl TimeTicks,
|
|
juniPimAutoRPConfifId InterfaceIndex }
|
|
|
|
juniPimAutoRPConfComponentIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A number uniquely identifying the component. Each protocol instance
|
|
connected to a separate domain should have a different index value."
|
|
::= { juniPimAutoRPConfEntry 1 }
|
|
|
|
juniPimAutoRPConfCandRPAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the candidate RP for this advertising agent
|
|
configuration."
|
|
::= { juniPimAutoRPConfEntry 2 }
|
|
|
|
juniPimAutoRPConfGroupAccessListName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..32))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The access list name from which group ranges are picked up for
|
|
advertising agent configuration."
|
|
::= { juniPimAutoRPConfEntry 3 }
|
|
|
|
juniPimAutoRPConfRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this row, by which new entries may be created, or old
|
|
entries deleted from this table."
|
|
::= { juniPimAutoRPConfEntry 4 }
|
|
|
|
juniPimAutoRPConfTTL OBJECT-TYPE
|
|
SYNTAX Integer32 (1..'FFFF'h)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time-to-live value used while sending AutoRP advertisement out for
|
|
this group-to-RP mappings created as a result of this configuration.
|
|
This should be set along with juniPimAutoRPConfRowStatus while creating
|
|
an AutoRP advertising agent to denote the TTL value to be used."
|
|
DEFVAL { 64 }
|
|
::= { juniPimAutoRPConfEntry 5 }
|
|
|
|
juniPimAutoRPConfAncmntIntvl OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time interval at which AutoRP advertisements are sent out for the
|
|
group-to-RP mappings created as a result of this configuration. This
|
|
should be set along with juniPimAutoRPConfRowStatus while creating an
|
|
AutoRP advertising agent to denote the announcement interval to be
|
|
used."
|
|
DEFVAL { 60 }
|
|
::= { juniPimAutoRPConfEntry 6 }
|
|
|
|
juniPimAutoRPConfifId OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface index of the interface for the candidate RP if an
|
|
interface with that address exists else it is set to 0."
|
|
::= { juniPimAutoRPConfEntry 7 }
|
|
|
|
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
-- The PIM AutoRP candidate RP table
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
juniPimAutoRPCandTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JuniPimAutoRPCandEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table listing AutoRP candidate RPS (advertising
|
|
agents)."
|
|
::= { juniPimGlobal 17 }
|
|
|
|
juniPimAutoRPCandEntry OBJECT-TYPE
|
|
SYNTAX JuniPimAutoRPCandEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) in the juniPimAutoRPCandTable."
|
|
INDEX { juniPimAutoRPCandComponentIndex,
|
|
juniPimAutoRPCandRPAddr,
|
|
juniPimAutoRPCandGroupAddr,
|
|
juniPimAutoRPCandGroupMask }
|
|
::= { juniPimAutoRPCandTable 1 }
|
|
|
|
JuniPimAutoRPCandEntry ::= SEQUENCE {
|
|
juniPimAutoRPCandComponentIndex Integer32,
|
|
juniPimAutoRPCandRPAddr IpAddress,
|
|
juniPimAutoRPCandGroupAddr IpAddress,
|
|
juniPimAutoRPCandGroupMask IpAddress,
|
|
juniPimAutoRPCandRowStatus RowStatus,
|
|
juniPimAutoRPCandAccessListName OCTET STRING,
|
|
juniPimAutoRPCandAutoRPTTL Integer32,
|
|
juniPimAutoRPCandAutoRPAncmntIntvl TimeTicks,
|
|
juniPimAutoRPCandIfId InterfaceIndex }
|
|
|
|
juniPimAutoRPCandComponentIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A number uniquely identifying the component. Each protocol instance
|
|
connected to a separate domain should have a different index value."
|
|
::= { juniPimAutoRPCandEntry 1 }
|
|
|
|
juniPimAutoRPCandRPAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the candidate RP for this group-to-RP mapping."
|
|
::= { juniPimAutoRPCandEntry 2 }
|
|
|
|
juniPimAutoRPCandGroupAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The group address of the candidate RP for this group-to-RP mapping."
|
|
::= { juniPimAutoRPCandEntry 3 }
|
|
|
|
juniPimAutoRPCandGroupMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The group mask of the candidate RP for this group-to-RP mapping."
|
|
::= { juniPimAutoRPCandEntry 4 }
|
|
|
|
juniPimAutoRPCandRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current status of this row."
|
|
::= { juniPimAutoRPCandEntry 5 }
|
|
|
|
juniPimAutoRPCandAccessListName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of the group list using which this AutoRP group-to-RP
|
|
candidate RP mapping was configured."
|
|
::= { juniPimAutoRPCandEntry 6 }
|
|
|
|
juniPimAutoRPCandAutoRPTTL OBJECT-TYPE
|
|
SYNTAX Integer32(1..'FFFF'h)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time-to-live value used while sending AutoRP advertisement out for
|
|
this group-to-RP mapping."
|
|
::= { juniPimAutoRPCandEntry 7 }
|
|
|
|
juniPimAutoRPCandAutoRPAncmntIntvl OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time interval at which AutoRP advertisements are sent out for this
|
|
group-to-RP mapping."
|
|
::= { juniPimAutoRPCandEntry 8 }
|
|
|
|
juniPimAutoRPCandIfId OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface index of the interface for this AutoRP group-to-RP
|
|
candidate RP mapping if an interface for RP address exists else it is
|
|
set to 0."
|
|
::= { juniPimAutoRPCandEntry 9 }
|
|
|
|
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
-- The PIM Component Table
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
juniPimComponentTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JuniPimComponentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table listing each component (domain) in PIM."
|
|
::= { juniPimGlobal 18 }
|
|
|
|
juniPimComponentEntry OBJECT-TYPE
|
|
SYNTAX JuniPimComponentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) in the juniPimComponentTable."
|
|
INDEX { juniPimComponentIndex }
|
|
::= { juniPimComponentTable 1 }
|
|
|
|
JuniPimComponentEntry ::= SEQUENCE {
|
|
juniPimComponentIndex Integer32,
|
|
juniPimComponentAutoRPMappingAgentRowStatus RowStatus,
|
|
juniPimComponentConfiguredAutoRPMappingAgentIfId InterfaceIndex,
|
|
juniPimComponentAutoRPMappingAgentInterval TimeTicks,
|
|
juniPimComponentAutoRPMappingTTL Integer32,
|
|
juniPimComponentAutoRPMappingAgentIntfAddr IpAddress,
|
|
juniPimComponentAutoRPMappingAgentWinnerAddr IpAddress,
|
|
juniPimComponentAutoRPMappingAgentWinnerLastHeard TimeTicks }
|
|
|
|
juniPimComponentIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A number uniquely identifying the component. Each protocol instance
|
|
connected to a separate domain should have a different index value."
|
|
::= { juniPimComponentEntry 1 }
|
|
|
|
juniPimComponentAutoRPMappingAgentRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of AutoRP mapping agent by which this router can be made an
|
|
AutoRP mapping agent or removed from being an AutoRP mapping agent in
|
|
this component."
|
|
::= { juniPimComponentEntry 2 }
|
|
|
|
juniPimComponentConfiguredAutoRPMappingAgentIfId OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface index of the interface which mapping agent should use to
|
|
send AutoRP mapping messages. If not specified, the interface with
|
|
highest IP address in this domain is picked up for this purpose."
|
|
::= { juniPimComponentEntry 3 }
|
|
|
|
juniPimComponentAutoRPMappingAgentInterval OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time interval at which AutoRP mapping messages are sent out in this
|
|
component. The default value is 60 seconds."
|
|
DEFVAL { 60 }
|
|
::= { juniPimComponentEntry 4 }
|
|
|
|
juniPimComponentAutoRPMappingTTL OBJECT-TYPE
|
|
SYNTAX Integer32 (1..'FFFF'h)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time-to-live value used while sending AutoRP mapping messages out
|
|
in this component."
|
|
DEFVAL { 64 }
|
|
::= { juniPimComponentEntry 5 }
|
|
|
|
juniPimComponentAutoRPMappingAgentIntfAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the interface which mapping agent is using to send
|
|
AutoRP mapping messages."
|
|
::= { juniPimComponentEntry 6 }
|
|
|
|
juniPimComponentAutoRPMappingAgentWinnerAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the winner AutoRP mapping agent. There can be
|
|
multiple mapping agents configured in a given PIM domain(component).
|
|
The mapping agent with highest IP address is chosen as the winner and it
|
|
continues to send AutoRP mapping messages. If the router itself is the
|
|
winner, then this is set to 0.0.0.0."
|
|
::= { juniPimComponentEntry 7 }
|
|
|
|
juniPimComponentAutoRPMappingAgentWinnerLastHeard OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time (in seconds) that has past since an AutoRP mapping message was
|
|
receieved from the winner AutoRP mapping agent. If the router itself is
|
|
the winner, then this is set to 0."
|
|
::= { juniPimComponentEntry 8 }
|
|
|
|
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
-- The PIM Unicast Route Table
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
juniPimUnicastRouteTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JuniPimUnicastRouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table listing all the unicast routes currently in use
|
|
by PIM for diong RPF checking."
|
|
::= { juniPimGlobal 19 }
|
|
|
|
juniPimUnicastRouteEntry OBJECT-TYPE
|
|
SYNTAX JuniPimUnicastRouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) in the juniPimUnicastRouteTable."
|
|
INDEX { juniPimUnicastRouteEntryAddr,
|
|
juniPimUnicastRouteEntryMask }
|
|
::= { juniPimUnicastRouteTable 1 }
|
|
|
|
JuniPimUnicastRouteEntry ::= SEQUENCE {
|
|
juniPimUnicastRouteEntryAddr IpAddress,
|
|
juniPimUnicastRouteEntryMask IpAddress,
|
|
juniPimUnicastRouteEntryRpfNbr IpAddress,
|
|
juniPimUnicastRouteEntryIifId InterfaceIndex,
|
|
juniPimUnicastRouteEntryIifAddr IpAddress,
|
|
juniPimUnicastRouteEntryPref Integer32,
|
|
juniPimUnicastRouteEntryMetric Integer32,
|
|
juniPimUnicastRouteEntryPimType JuniPimType }
|
|
|
|
juniPimUnicastRouteEntryAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The address of route in use."
|
|
::= { juniPimUnicastRouteEntry 1 }
|
|
|
|
juniPimUnicastRouteEntryMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mask of route in use."
|
|
::= { juniPimUnicastRouteEntry 2 }
|
|
|
|
juniPimUnicastRouteEntryRpfNbr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The RPF neighbor (next-hop) to reach the route of this entry. It is
|
|
set to 0.0.0.0 for directly connected routes."
|
|
::= { juniPimUnicastRouteEntry 3 }
|
|
|
|
juniPimUnicastRouteEntryIifId OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface index (next-hop) to reach the route of this entry."
|
|
::= { juniPimUnicastRouteEntry 4 }
|
|
|
|
juniPimUnicastRouteEntryIifAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface address (next-hop) to reach the route of this entry."
|
|
::= { juniPimUnicastRouteEntry 5 }
|
|
|
|
juniPimUnicastRouteEntryPref OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The preference of the route of this entry."
|
|
::= { juniPimUnicastRouteEntry 6 }
|
|
|
|
juniPimUnicastRouteEntryMetric OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The metric of the route of this entry."
|
|
::= { juniPimUnicastRouteEntry 7 }
|
|
|
|
juniPimUnicastRouteEntryPimType OBJECT-TYPE
|
|
SYNTAX JuniPimType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates whether the route specified in this entry is
|
|
being used by sparse-mode and/or dense-mode PIM."
|
|
::= { juniPimUnicastRouteEntry 8 }
|
|
|
|
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
-- The PIM Shortest Path Tree Threshold Table
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
juniPimSPTThresholdTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JuniPimSPTThresholdEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table listing threshold values set for switching from
|
|
shared tree to shortest path tree and vice versa for data forwarded by
|
|
PIM sparse-mode."
|
|
::= { juniPimGlobal 20 }
|
|
|
|
juniPimSPTThresholdEntry OBJECT-TYPE
|
|
SYNTAX JuniPimSPTThresholdEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) in the juniPimSPTThresholdTable."
|
|
INDEX { juniPimSPTThresholdAccessListName }
|
|
::= { juniPimSPTThresholdTable 1 }
|
|
|
|
JuniPimSPTThresholdEntry ::= SEQUENCE {
|
|
juniPimSPTThresholdAccessListName OCTET STRING,
|
|
juniPimSPTThresholdRowStatus RowStatus,
|
|
juniPimSPTThresholdKbps Integer32 }
|
|
|
|
juniPimSPTThresholdAccessListName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..32))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of the access list from which group ranges are picked up for
|
|
setting SPT threshold in this entry."
|
|
::= { juniPimSPTThresholdEntry 1 }
|
|
|
|
juniPimSPTThresholdRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this row, by which new entries may be created, or old
|
|
entries deleted from this table."
|
|
::= { juniPimSPTThresholdEntry 2 }
|
|
|
|
juniPimSPTThresholdKbps OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of SPT threshold in kilobits per second. Default value is
|
|
0."
|
|
DEFVAL { 0 }
|
|
::= { juniPimSPTThresholdEntry 3 }
|
|
|
|
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
-- Conformance information
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
juniPimConformance OBJECT IDENTIFIER ::= { juniPimMIB 2 }
|
|
juniPimCompliances OBJECT IDENTIFIER ::= { juniPimConformance 1 }
|
|
juniPimGroups OBJECT IDENTIFIER ::= { juniPimConformance 2 }
|
|
|
|
--
|
|
-- compliance statements
|
|
--
|
|
juniPimCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for entities which implement the Juniper PIM
|
|
MIB."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
juniPimGeneralGroup,
|
|
juniPimInterfaceGroup,
|
|
juniPimMRouteConfGroup,
|
|
juniPimMRouteNextHopGroup,
|
|
juniPimRPSetGroup,
|
|
juniPimStaticRPConfGroup,
|
|
juniPimAutoRPConfGroup,
|
|
juniPimAutoRPCandGroup,
|
|
juniPimComponentGroup,
|
|
juniPimUnicastRouteGroup,
|
|
juniPimSPTThresholdGroup }
|
|
::= { juniPimCompliances 1 }
|
|
|
|
-- units of conformance
|
|
|
|
juniPimGeneralGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
juniPimNumHelloRcvd,
|
|
juniPimNumJoinPruneRcvd,
|
|
juniPimNumAssertRcvd,
|
|
juniPimNumGraftRcvd,
|
|
juniPimNumGraftAckRcvd,
|
|
juniPimNumHelloSent,
|
|
juniPimNumJoinPruneSent,
|
|
juniPimNumAssertSent,
|
|
juniPimNumGraftSent,
|
|
juniPimNumGraftAckSent }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects for managing general PIM capabilities in a
|
|
Juniper product."
|
|
::= { juniPimGroups 1 } -- JUNOSe 3.0
|
|
|
|
juniPimInterfaceGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
juniPimIntfNumHelloRcvd,
|
|
juniPimIntfNumJoinPruneRcvd,
|
|
juniPimIntfNumAssertRcvd,
|
|
juniPimIntfNumGraftRcvd,
|
|
juniPimIntfNumGraftAckRcvd,
|
|
juniPimIntfNumHelloSent,
|
|
juniPimIntfNumJoinPruneSent,
|
|
juniPimIntfNumAssertSent,
|
|
juniPimIntfNumGraftSent,
|
|
juniPimIntfNumGraftAckSent,
|
|
juniPimIntfVersion,
|
|
juniPimIntfNumNbrs }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects for managing PIM interface capabilities in a
|
|
Juniper product."
|
|
::= { juniPimGroups 2 }
|
|
|
|
juniPimMRouteConfGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
juniPimMRouteUpstreamAssertTimer,
|
|
juniPimMRouteAssertMetric,
|
|
juniPimMRouteAssertPref,
|
|
juniPimMRouteAssertRPTBit,
|
|
juniPimMRouteBits,
|
|
juniPimMRouteRPAddrInUse,
|
|
juniPimMRouteUpstreamNbr,
|
|
juniPimMRouteIifAddr,
|
|
juniPimMRouteIsWaitingToSwitchToSPT,
|
|
juniPimMRouteEntryExpiryTimer,
|
|
juniPimMRouteSenderDRAddr,
|
|
juniPimMRouteRouteAddr,
|
|
juniPimMRouteRouteMask,
|
|
juniPimMRouteGRPAddr,
|
|
juniPimMRouteGRPMask,
|
|
juniPimMRouteOtherProtoOifJoinTypeAll,
|
|
juniPimMRouteOtherProtoOifJoinTypeG,
|
|
juniPimMRouteOtherProtoOifJoinTypeSG,
|
|
juniPimMRoutePimType }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects for managing PIM multicast route capabilities
|
|
in a Juniper product."
|
|
::= { juniPimGroups 3 }
|
|
|
|
juniPimMRouteNextHopGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
juniPimMRouteNextHopPruneReason,
|
|
juniPimMRouteNextHopJoinTypeSSRP,
|
|
juniPimMRouteNextHopJoinTypeG,
|
|
juniPimMRouteNextHopJoinTypeSG,
|
|
juniPimMRouteNextHopHasLGM,
|
|
juniPimMRouteNextHopHasOifAW,
|
|
juniPimMRouteNextHopHasOifSendAssert,
|
|
juniPimMRouteNextHopHasOifRegister,
|
|
juniPimMRouteNextHopHasOifBorderBit,
|
|
juniPimMRouteNextHopHasOifNullEncapsBit,
|
|
juniPimMRouteNextHopJoinEndTimer,
|
|
juniPimMRouteNextHopAssertEndTimer,
|
|
juniPimMRouteNextHopNextAssertTimer,
|
|
juniPimMRouteNextHopAssertSrcAddress,
|
|
juniPimMRouteNextHopRegisterSuppressionTimer,
|
|
juniPimMRouteNextHopPimType,
|
|
juniPimMRouteNextHopPruneTimeLeft,
|
|
juniPimMRouteNextHopsendingIpAddress }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects for managing PIM multicast route next hop
|
|
capabilities in a Juniper product."
|
|
::= { juniPimGroups 4 }
|
|
|
|
juniPimRPSetGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
juniPimRPSetPriority,
|
|
juniPimRPSetTypeInfo,
|
|
juniPimRPSetAccessListName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects for managing PIM RP-Set capabilities in a
|
|
Juniper product."
|
|
::= { juniPimGroups 5 }
|
|
|
|
juniPimStaticRPConfGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
juniPimStaticRPConfRowStatus,
|
|
juniPimStaticRPConfOverride }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects for managing statically configured PIM RPs
|
|
capabilities in a Juniper product."
|
|
::= { juniPimGroups 6 }
|
|
|
|
juniPimAutoRPConfGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
juniPimAutoRPConfRowStatus,
|
|
juniPimAutoRPConfTTL,
|
|
juniPimAutoRPConfAncmntIntvl,
|
|
juniPimAutoRPConfifId }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects for managing PIM AutoRP candidate advertisment
|
|
agent RP capabilities in a Juniper product."
|
|
::= { juniPimGroups 7 }
|
|
|
|
juniPimAutoRPCandGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
juniPimAutoRPCandRowStatus,
|
|
juniPimAutoRPCandAccessListName,
|
|
juniPimAutoRPCandAutoRPTTL,
|
|
juniPimAutoRPCandAutoRPAncmntIntvl,
|
|
juniPimAutoRPCandIfId }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects for managing PIM AutoRP candidate advertising
|
|
agent RP capabilities in a Juniper product."
|
|
::= { juniPimGroups 8 }
|
|
|
|
juniPimComponentGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
juniPimComponentAutoRPMappingAgentRowStatus,
|
|
juniPimComponentConfiguredAutoRPMappingAgentIfId,
|
|
juniPimComponentAutoRPMappingAgentInterval,
|
|
juniPimComponentAutoRPMappingTTL,
|
|
juniPimComponentAutoRPMappingAgentIntfAddr,
|
|
juniPimComponentAutoRPMappingAgentWinnerAddr,
|
|
juniPimComponentAutoRPMappingAgentWinnerLastHeard }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects for managing PIM component (domain)
|
|
capabilities in a Juniper product."
|
|
::= { juniPimGroups 9 }
|
|
|
|
juniPimUnicastRouteGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
juniPimUnicastRouteEntryRpfNbr,
|
|
juniPimUnicastRouteEntryIifId,
|
|
juniPimUnicastRouteEntryIifAddr,
|
|
juniPimUnicastRouteEntryPref,
|
|
juniPimUnicastRouteEntryMetric,
|
|
juniPimUnicastRouteEntryPimType }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects for managing PIM unicast route capabilities in
|
|
a Juniper product."
|
|
::= { juniPimGroups 10 }
|
|
|
|
juniPimSPTThresholdGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
juniPimSPTThresholdRowStatus,
|
|
juniPimSPTThresholdKbps }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects for managing PIM shortest path tree threshold
|
|
capabilities in a Juniper product."
|
|
::= { juniPimGroups 11 }
|
|
|
|
END
|