571 lines
22 KiB
Plaintext
571 lines
22 KiB
Plaintext
|
|
-- *****************************************************************************
|
|
-- Juniper-REDUNDANCY-MIB
|
|
--
|
|
-- Juniper Networks Enterprise MIB
|
|
-- REDUNDANCY MIB
|
|
--
|
|
-- Copyright (c) 2003 Juniper Networks Inc.
|
|
-- All Rights Reserved.
|
|
-- *****************************************************************************
|
|
|
|
Juniper-REDUNDANCY-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, Integer32, TimeTicks
|
|
FROM SNMPv2-SMI
|
|
DisplayString, RowStatus, TruthValue, TEXTUAL-CONVENTION, DateAndTime
|
|
FROM SNMPv2-TC
|
|
sysUpTime
|
|
FROM SNMPv2-MIB
|
|
MODULE-COMPLIANCE, OBJECT-GROUP
|
|
FROM SNMPv2-CONF
|
|
juniMibs
|
|
FROM Juniper-MIBs;
|
|
|
|
juniRedundancyMIB MODULE-IDENTITY
|
|
LAST-UPDATED "200312122104Z" -- 12-Dec-03 04:04 PM EST
|
|
ORGANIZATION "Juniper Networks, Inc."
|
|
CONTACT-INFO
|
|
" Juniper Networks, Inc.
|
|
Postal: 10 Technology Park Road
|
|
Westford, MA 01886-3146
|
|
USA
|
|
Tel: +1 978 589 5800
|
|
E-mail: mib@Juniper.net"
|
|
DESCRIPTION
|
|
"The redundancy configuration MIB for Juniper Networks enterprise."
|
|
-- Revision History
|
|
REVISION "200312120000Z" -- 12-Dec-03 - JUNOSe 6.0
|
|
DESCRIPTION
|
|
"Initial version of this MIB module."
|
|
::= { juniMibs 74 }
|
|
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
-- Textual conventions
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
JuniRedundancyState ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current state of redundancy subsystem:
|
|
notKnown - Redundancy state is unknown.
|
|
fileSystemSyncing - Redundancy operation is based on file system
|
|
synchronization. SRP switchover stops forwarding.
|
|
disabled - Redundancy operation is based on high availability
|
|
model but high availability is not yet operational.
|
|
SRP switchover stops forwarding.
|
|
initializing - Redundancy operation is based on high availability
|
|
model and standby SRP is being bulk synchronized from
|
|
active SRP. SRP switchover stops forwarding.
|
|
pending - Redundancy operation is based on high availability
|
|
model and bulk synchronization of standby SRP completed.
|
|
SRP switchover stops forwarding.
|
|
active - Redundancy operation is based on high availability model
|
|
and high availability is fully operational. SRP
|
|
switchover does not stop forwarding."
|
|
SYNTAX INTEGER {
|
|
notKnown(1),
|
|
fileSystemSyncing(2),
|
|
disabled(3),
|
|
initializing(4),
|
|
pending(5),
|
|
active(6) }
|
|
|
|
JuniRedundancyMode ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mode of the redundancy subsystem:
|
|
fileSystemSynchronization - SRP synchronization is based on file synchronization.
|
|
highAvailability - SRP synchronization is based on high availability
|
|
model that allows non-stop forwarding."
|
|
SYNTAX INTEGER {
|
|
fileSystemSynchronization(1),
|
|
highAvailability(2) }
|
|
|
|
JuniRedundancyResetReason ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Reason codes for the reset of active SRP or a line card that might result
|
|
in switch of control to standby SRP or spare line card.
|
|
none - No reset or switchover has occurred and indicates 'power-on'
|
|
situation.
|
|
notKnown - Reason is unknown.
|
|
userInitiated - A safe, manual reset was initiated by the user."
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
notKnown(2),
|
|
userInitiated(3) }
|
|
|
|
JuniRedundancySystemActivationType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Various kinds of system activation:
|
|
reload - System has reloaded, i.e., no switchover has occurred.
|
|
coldSwitch - System switched over from active to standby SRP and the
|
|
switchover involved reloading of line cards interrupting
|
|
forwarding.
|
|
warmSwitch - System switched over from active to standby SRP; line cards were
|
|
not reloaded during switchover and forwarding was uninterrupted."
|
|
SYNTAX INTEGER {
|
|
reload(1),
|
|
coldSwitch(2),
|
|
warmSwitch(3) }
|
|
|
|
JuniRedundancyResetType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Identifies the nature of the reset and slot types involved since the
|
|
system is powered on.
|
|
notKnown - Reset type is unknown.
|
|
srpReload - The reset involved reloading SRP slot(s).
|
|
srpSwitchover - The reset involved switchover of SRP slot(s).
|
|
linecardReload - The reset involved reloading the line card slot(s).
|
|
linecardSwitchover - The reset involved line card redundancy."
|
|
SYNTAX INTEGER {
|
|
notKnown(1),
|
|
srpReload(2),
|
|
srpSwitchover(3),
|
|
linecardReload(4),
|
|
linecardSwitchover(5) }
|
|
|
|
JuniRedundancyHistoryCommand ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Identifies the command to be performed on the system activation
|
|
history table.
|
|
keep - Retain history in persistent storage.
|
|
clear - Erase the current entries of juniRedundancySystemActivationHistoryTable."
|
|
SYNTAX INTEGER {
|
|
keep(1),
|
|
clear(2) }
|
|
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
-- MIB Structure
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
juniRedundancyNotifications OBJECT IDENTIFIER ::= { juniRedundancyMIB 0 }
|
|
juniRedundancyObjects OBJECT IDENTIFIER ::= { juniRedundancyMIB 1 }
|
|
juniRedundancyMIBConformance OBJECT IDENTIFIER ::= { juniRedundancyMIB 2 }
|
|
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
-- Managed object groups
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
juniRedundancyStatus OBJECT IDENTIFIER ::= {juniRedundancyObjects 1 }
|
|
juniRedundancyCfg OBJECT IDENTIFIER ::= {juniRedundancyObjects 2 }
|
|
juniRedundancyHistory OBJECT IDENTIFIER ::= {juniRedundancyObjects 3 }
|
|
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
-- Managed objects for Redundancy
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
--
|
|
-- Status sub group definitions
|
|
--
|
|
juniRedundancyActiveSlot OBJECT-TYPE
|
|
SYNTAX Integer32(0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique identifier for active SRP slot."
|
|
::= { juniRedundancyStatus 1 }
|
|
|
|
juniRedundancyActiveSlotState OBJECT-TYPE
|
|
SYNTAX JuniRedundancyState
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current state of redundancy on active SRP."
|
|
::= { juniRedundancyStatus 2 }
|
|
|
|
juniRedundancyStandbySlot OBJECT-TYPE
|
|
SYNTAX Integer32(0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique identifier for standby SRP slot."
|
|
::= { juniRedundancyStatus 3 }
|
|
|
|
juniRedundancyStandbySlotState OBJECT-TYPE
|
|
SYNTAX JuniRedundancyState
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current state of redundancy on standby SRP."
|
|
::= { juniRedundancyStatus 4 }
|
|
|
|
juniRedundancyLastResetReason OBJECT-TYPE
|
|
SYNTAX JuniRedundancyResetReason
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The reason for the last SRP reset."
|
|
::= { juniRedundancyStatus 5 }
|
|
|
|
juniRedundancyLastSystemActivationTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of sysUptime when the system is operational either
|
|
following a reload or a switchover. The value 0 is a special
|
|
value to indicate 'from reset'."
|
|
::= { juniRedundancyStatus 6 }
|
|
|
|
juniRedundancyLastSystemActivationType OBJECT-TYPE
|
|
SYNTAX JuniRedundancySystemActivationType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of last SRP activation when the system became operational."
|
|
::= { juniRedundancyStatus 7 }
|
|
|
|
juniRedundancyHaActiveTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of sysUptime when active SRP enters 'active' state as
|
|
indicated in juniRedundancyActiveSlotState object. The value is 0 in
|
|
file system synchronization redundancy mode."
|
|
::= { juniRedundancyStatus 8 }
|
|
|
|
--
|
|
-- Cfg sub group definitions
|
|
--
|
|
juniRedundancyNotifsEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Allows enabling and disabling of redundancy subsystem notifications."
|
|
DEFVAL { true }
|
|
::= { juniRedundancyCfg 1 }
|
|
|
|
juniRedundancyCfgRedundancyMode OBJECT-TYPE
|
|
SYNTAX JuniRedundancyMode
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the redundancy mode configured on the system."
|
|
DEFVAL { fileSystemSynchronization }
|
|
::= { juniRedundancyCfg 2 }
|
|
|
|
--
|
|
-- History sub group definitions
|
|
--
|
|
juniRedundancySystemActivationHistoryTableMaxLength OBJECT-TYPE
|
|
SYNTAX Integer32(0..50)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum number of entries allowed in juniRedundancySystemActivationHistoryTable.
|
|
A value of 0 will result in no history being displayed in
|
|
juniRedundancySystemActivationHistoryTable."
|
|
DEFVAL { 0 }
|
|
::= { juniRedundancyHistory 1 }
|
|
|
|
juniRedundancySystemActivationHistoryCommand OBJECT-TYPE
|
|
SYNTAX JuniRedundancyHistoryCommand
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A control variable to perform certain operations on
|
|
juniRedundancySystemActivationHistoryTable."
|
|
DEFVAL { keep }
|
|
::= { juniRedundancyHistory 2 }
|
|
|
|
juniRedundancySystemActivationHistoryTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JuniRedundancySystemActivationHistoryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that tracks the history of all reloads and switchovers that have
|
|
occurred since system is powered on. The maximum number of entries permissible
|
|
in this table is defined by juniRedundancySystemActivationHistoryTableMaxLength.
|
|
When the number of entries in the table reaches the maximum limit, the next
|
|
entry would replace the oldest existing entry in the table."
|
|
::= { juniRedundancyHistory 3 }
|
|
|
|
juniRedundancySystemActivationHistoryEntry OBJECT-TYPE
|
|
SYNTAX JuniRedundancySystemActivationHistoryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The entries in this table contain the reload and switchover information.
|
|
Each entry in the table is indexed by juniRedundancySystemActivationHistoryIndex.
|
|
The index wraps around to 1 after reaching the maximum value."
|
|
INDEX { juniRedundancySystemActivationHistoryIndex }
|
|
::= { juniRedundancySystemActivationHistoryTable 1 }
|
|
|
|
JuniRedundancySystemActivationHistoryEntry ::= SEQUENCE {
|
|
juniRedundancySystemActivationHistoryIndex Integer32,
|
|
juniRedundancyHistoryResetType JuniRedundancyResetType,
|
|
juniRedundancyHistoryActivationType JuniRedundancySystemActivationType,
|
|
juniRedundancyHistoryPrevActiveSlot Integer32,
|
|
juniRedundancyHistoryPrevActiveRelease DisplayString,
|
|
juniRedundancyHistoryCurrActiveSlot Integer32,
|
|
juniRedundancyHistoryCurrActiveRelease DisplayString,
|
|
juniRedundancyHistoryResetReason JuniRedundancyResetReason,
|
|
juniRedundancyHistoryActivationTime DateAndTime }
|
|
|
|
juniRedundancySystemActivationHistoryIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An integer value for the purpose of indexing system
|
|
activation history table. After reaching maximum value as
|
|
indicated by juniRedundancySystemActivationHistoryTableMaxLength,
|
|
it wraps around to 1."
|
|
::= { juniRedundancySystemActivationHistoryEntry 1 }
|
|
|
|
juniRedundancyHistoryResetType OBJECT-TYPE
|
|
SYNTAX JuniRedundancyResetType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the nature of the reset - reload or switchover - and the slot
|
|
types involved. Depending on the value of this object, certain elements
|
|
of JuniRedundancySystemActivationHistoryEntry will not be applicable."
|
|
::= { juniRedundancySystemActivationHistoryEntry 2 }
|
|
|
|
juniRedundancyHistoryActivationType OBJECT-TYPE
|
|
SYNTAX JuniRedundancySystemActivationType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the activation type of the particular historical system
|
|
activation entry with respect to the slot types involved."
|
|
::= { juniRedundancySystemActivationHistoryEntry 3 }
|
|
|
|
juniRedundancyHistoryPrevActiveSlot OBJECT-TYPE
|
|
SYNTAX Integer32(0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the slot number of active SRP or line card that went down."
|
|
::= { juniRedundancySystemActivationHistoryEntry 4 }
|
|
|
|
juniRedundancyHistoryPrevActiveRelease OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the system-wide boot release file name of the slot indicated
|
|
by juniRedundancyHistoryPrevActiveSlot."
|
|
::= { juniRedundancySystemActivationHistoryEntry 5 }
|
|
|
|
juniRedundancyHistoryCurrActiveSlot OBJECT-TYPE
|
|
SYNTAX Integer32(0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the slot number of standby SRP or spare line card that took over."
|
|
::= { juniRedundancySystemActivationHistoryEntry 6 }
|
|
|
|
juniRedundancyHistoryCurrActiveRelease OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the system-wide boot release file name of the slot indicated
|
|
by juniRedundancyHistoryCurrActiveSlot."
|
|
::= { juniRedundancySystemActivationHistoryEntry 7 }
|
|
|
|
juniRedundancyHistoryResetReason OBJECT-TYPE
|
|
SYNTAX JuniRedundancyResetReason
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the reason for reload or switchover of the slots involved."
|
|
::= { juniRedundancySystemActivationHistoryEntry 8 }
|
|
|
|
juniRedundancyHistoryActivationTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the date and time when the reload or switchover of the slots
|
|
occurred."
|
|
::= { juniRedundancySystemActivationHistoryEntry 9 }
|
|
|
|
juniRedundancyHistoryReloads OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the number of reloads since the system is powered on."
|
|
::= { juniRedundancyHistory 4 }
|
|
|
|
juniRedundancyHistoryColdSwitchovers OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the number of cold switchovers since the system is powered on."
|
|
::= { juniRedundancyHistory 5 }
|
|
|
|
juniRedundancyHistoryWarmSwitchovers OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the number of warm switchovers since the system is powered on."
|
|
::= { juniRedundancyHistory 6 }
|
|
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
-- Notifications
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
juniRedundancyColdSwitchoverNotification NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
juniRedundancyActiveSlot,
|
|
juniRedundancyLastResetReason
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is generated in a dual SRP system when control
|
|
transfers from one to SRP to the other in file system synchronization
|
|
mode or when high availability is not operational. This notification
|
|
is sent by the newly active SRP immediately following the switchover
|
|
in which configuration is preserved but volatile state is lost."
|
|
::= { juniRedundancyNotifications 1 }
|
|
|
|
juniRedundancyWarmSwitchoverNotification NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
juniRedundancyActiveSlot,
|
|
juniRedundancyLastResetReason
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is generated in a dual SRP system when control
|
|
transfers from one SRP to the other and high availability is
|
|
operational. This notification is sent by the newly active SRP
|
|
immediately following the switchover in which configuration and
|
|
volatile state are preserved."
|
|
::= { juniRedundancyNotifications 2 }
|
|
|
|
juniRedundancyStateEnabledNotification NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
juniRedundancyActiveSlot
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A state change notification sent by active SRP whenever system enters
|
|
'active' state."
|
|
::= { juniRedundancyNotifications 3 }
|
|
|
|
juniRedundancyStateDisabledNotification NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
juniRedundancyActiveSlot
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A state change notification sent by active SRP whenever system enters
|
|
'disabled' state."
|
|
::= { juniRedundancyNotifications 4 }
|
|
|
|
juniRedundancyStatePendingNotification NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
juniRedundancyActiveSlot
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A state change notification sent by active SRP whenever system enters
|
|
'pending' state."
|
|
::= { juniRedundancyNotifications 5 }
|
|
|
|
juniRedundancyModeNotification NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
juniRedundancyActiveSlot,
|
|
juniRedundancyCfgRedundancyMode
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A mode change notification sent by active SRP whenever redundancy mode
|
|
of the system is changed from 'fileSystemSynchronization' to 'highAvailability'
|
|
and vice versa."
|
|
::= { juniRedundancyNotifications 6 }
|
|
|
|
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
-- Conformance information
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
juniRedundancyMIBCompliances OBJECT IDENTIFIER ::= { juniRedundancyMIBConformance 1 }
|
|
juniRedundancyMIBGroups OBJECT IDENTIFIER ::= { juniRedundancyMIBConformance 2 }
|
|
|
|
--
|
|
-- compliance statements
|
|
--
|
|
juniRedundancyMIBCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for system redundancy support."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
juniRedundancyStatusGroup,
|
|
juniRedundancyCfgGroup,
|
|
juniRedundancyHistoryGroup,
|
|
juniRedundancyNotificationGroup
|
|
}
|
|
::= { juniRedundancyMIBCompliances 1 }
|
|
|
|
--
|
|
-- units of conformance
|
|
--
|
|
juniRedundancyStatusGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
juniRedundancyActiveSlot,
|
|
juniRedundancyActiveSlotState,
|
|
juniRedundancyStandbySlot,
|
|
juniRedundancyStandbySlotState,
|
|
juniRedundancyLastResetReason,
|
|
juniRedundancyLastSystemActivationTime,
|
|
juniRedundancyLastSystemActivationType,
|
|
juniRedundancyHaActiveTime }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of redundancy status objects."
|
|
::= { juniRedundancyMIBGroups 1 }
|
|
|
|
juniRedundancyCfgGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
juniRedundancyNotifsEnabled,
|
|
juniRedundancyCfgRedundancyMode }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of redundancy configuration objects."
|
|
::= { juniRedundancyMIBGroups 2 }
|
|
|
|
juniRedundancyHistoryGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
juniRedundancySystemActivationHistoryTableMaxLength,
|
|
juniRedundancySystemActivationHistoryCommand,
|
|
juniRedundancyHistoryResetType,
|
|
juniRedundancyHistoryActivationType,
|
|
juniRedundancyHistoryPrevActiveSlot,
|
|
juniRedundancyHistoryPrevActiveRelease,
|
|
juniRedundancyHistoryCurrActiveSlot,
|
|
juniRedundancyHistoryCurrActiveRelease,
|
|
juniRedundancyHistoryResetReason,
|
|
juniRedundancyHistoryActivationTime,
|
|
juniRedundancyHistoryReloads,
|
|
juniRedundancyHistoryColdSwitchovers,
|
|
juniRedundancyHistoryWarmSwitchovers }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of redundancy history objects."
|
|
::= { juniRedundancyMIBGroups 3 }
|
|
|
|
juniRedundancyNotificationGroup NOTIFICATION-GROUP
|
|
NOTIFICATIONS {
|
|
juniRedundancyColdSwitchoverNotification,
|
|
juniRedundancyWarmSwitchoverNotification,
|
|
juniRedundancyStateEnabledNotification,
|
|
juniRedundancyStateDisabledNotification,
|
|
juniRedundancyStatePendingNotification,
|
|
juniRedundancyModeNotification }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of notifications for redundancy events."
|
|
::= { juniRedundancyMIBGroups 4 }
|
|
|
|
END
|