mibs/MIBS/linksys/LINKSYS-BONJOUR-MIB
2023-12-05 12:25:34 +01:00

348 lines
12 KiB
Plaintext

LINKSYS-BONJOUR-MIB DEFINITIONS ::= BEGIN
IMPORTS
OBJECT-TYPE,
MODULE-IDENTITY FROM SNMPv2-SMI
TEXTUAL-CONVENTION, DisplayString, RowStatus FROM SNMPv2-TC
InetAddress, InetAddressType FROM INET-ADDRESS-MIB
InterfaceIndex FROM IF-MIB
rnd FROM LINKSYS-MIB;
rlBonjour MODULE-IDENTITY
LAST-UPDATED "200909210000Z"
ORGANIZATION "Linksys LLC."
CONTACT-INFO
"linksys.com"
DESCRIPTION
"The private MIB module definition for Bonjour protocol."
REVISION "200904230000Z"
DESCRIPTION
"Initial revision."
::= { rnd 114 }
-- -------------------------------------------------------------
-- global scalar
-- -------------------------------------------------------------
rlBonjourPublish OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables Bonjour publishing."
::= {rlBonjour 1 }
-- -------------------------------------------------------------
-- Textual Conventions
-- -------------------------------------------------------------
RlBonjourServiceState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Bonjour service status - (per IP interface)."
SYNTAX INTEGER {
rlBonjourNotPublished(0),
rlBonjourInactive(1),
rlBonjourRegistering(2),
rlBonjourRunning(3)
}
RlBonjourOperationState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Bonjour service an L2 interface operation state."
SYNTAX INTEGER {
up(1),
down(2)
}
RlBonjourOperationReason ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Bonjour service an L2 interface operation state."
SYNTAX INTEGER {
notExclude(0),
include(1),
notInclude(2),
exclude(3),
bonjourDisabled(4),
serviceDisabled(5),
noIPaddress(6),
l2InterfaceDown(7),
notPresent(8),
unknown(9)
}
-- -------------------------------------------------------------
-- --------- Table --------------------------------------
-- -------------------------------------------------------------
-- ------------------------------------------------------------
-- --------- This MIb will not be bound in 750 version, ----------------
-- --------- The MIb following rlBonjourStateTable will replace it------
-- ------------------------------------------------------------
rlBonjourStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlBonjourStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table listing the service bonjour status per service and IP interface.
In order to keep the table sorted according to the customary lexicographical
order of the rlBonjourStatusServiceName strings, rlBonjourStatusServiceName
will be padded with blanks. Bonjour will truncate the padded blanks when advertising this service name.
Using this MIB user can monitor actual state of a service on an IP interface"
::= {rlBonjour 2 }
rlBonjourStatusEntry OBJECT-TYPE
SYNTAX RlBonjourStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" An entry in the rlBonjourStatusEntry."
INDEX { rlBonjourStatusServiceName,rlBonjourStatusIPInterfaceType, rlBonjourStatusIPInterfaceAddr }
::= {rlBonjourStatusTable 1 }
RlBonjourStatusEntry ::= SEQUENCE {
rlBonjourStatusServiceName DisplayString ,
rlBonjourStatusIPInterfaceType InetAddressType,
rlBonjourStatusIPInterfaceAddr InetAddress,
rlBonjourStatusState RlBonjourServiceState
}
rlBonjourStatusServiceName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This variable identifies the service name."
::= { rlBonjourStatusEntry 1 }
rlBonjourStatusIPInterfaceType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This variable indicates the type of the IP interface
on which the Bonjour service should be published."
::= { rlBonjourStatusEntry 2 }
rlBonjourStatusIPInterfaceAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This variable indicates the address of the IP interface
on which the Bonjour service should be published."
::= { rlBonjourStatusEntry 3 }
rlBonjourStatusState OBJECT-TYPE
SYNTAX RlBonjourServiceState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable identifies the service state on IP interface of the device."
::= { rlBonjourStatusEntry 4 }
rlBonjourStateTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlBonjourStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table listing the service bonjour state per service and L2 interface.
The services that are displayed here are only those who are supported per project.
The L2 interfaces that are displayed here are either:
L2 interfaces with an IP on it
OR
L2 interfaces listed in the table below
Per each pair (service and L2 interface) table displays:
state :
UP - Bonjour published the service on this L2 interface
Not-exclude - the L2 interface has IP address (L2 interface is in UP state)
AND rlBonjourL2Table is empty
AND rlBonjourL2Mode is disable
include - the L2 interfaces are listed in the table rlBonjourL2Table
AND rlBonjourL2Mode is enabled
Down - Bonjour sent goodbye packets regarding this service on this L2 interface
exclude - the L2 interface is a member of the rlBonjourL2Table
AND rlBonjourL2Mode is disable
Not-Include - rlBonjourL2Table is empty
AND rlBonjourL2Mode is enable
service disabled - service was removed ue to specific request from L1 manager
No IP address - the L2 interfaces is listed in the table rlBonjourL2EnableTable
BUT don't have an IP on it
Not-present - the L2 interfaces is listed in the table rlBonjourL2EnableTable
BUT no yet defined (like vlan not created or port in an unconnected salve)
Bonjour disabled - rlBonjourPublish scalar is off
Using this MIB user can monitor actual state of a service on an IP interface"
::= {rlBonjour 3 }
rlBonjourStateEntry OBJECT-TYPE
SYNTAX RlBonjourStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" An entry in the rlBonjourStatusEntry."
INDEX { rlBonjourStateServiceName,rlBonjourStateL2Interface }
::= {rlBonjourStateTable 1 }
RlBonjourStateEntry ::= SEQUENCE {
rlBonjourStateServiceName DisplayString ,
rlBonjourStateL2Interface InterfaceIndex,
rlBonjourStateOperationMode RlBonjourOperationState,
rlBonjourStateOperationReason RlBonjourOperationReason
}
rlBonjourStateServiceName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This variable identifies the service name."
::= { rlBonjourStateEntry 1 }
rlBonjourStateL2Interface OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This variable indicates the L2 interface
on which the Bonjour service should be published."
::= { rlBonjourStateEntry 2 }
rlBonjourStateOperationMode OBJECT-TYPE
SYNTAX RlBonjourOperationState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable indicates wether Bonjour is operational on the pair (service + L2 interface)."
::= { rlBonjourStateEntry 3 }
rlBonjourStateOperationReason OBJECT-TYPE
SYNTAX RlBonjourOperationReason
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable specifies the reason of the previous field: rlBonjourStateOperationMode."
::= { rlBonjourStateEntry 4 }
rlBonjourL2Table OBJECT-TYPE
SYNTAX SEQUENCE OF RlBonjourL2Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table listing the L2 interfaces on which the user wishes to
enable OR disable Bonjour with respect to rlBonjourL2Mode.
If rlBonjourL2Mode is set to include AND L2 interface is in this table
it does not ensure Bonjour WILL publish services on it.
Publication is also dependent on these fundemental conditions:
rlBonjourPublish must be on
at least one service should be enabled
L2 must be present and UP
have at least one IP on it
If this table is empty AND rlBonjourL2Mode is set to include
Bonjour won't operate at all.
If rlBonjourL2Mode is set to exclude, and rlBonjourL2Table is empty
Bonjour will be published on ALL L2 interfaces answering to the
fundemental conditions specified above.
If rlBonjourL2Table is NOT empty then Bonjour will operate on
ALL L2 interfaces answering to the fundemental conditions specified
above BUT NOT members of this list.
"
::= {rlBonjour 4 }
rlBonjourL2Entry OBJECT-TYPE
SYNTAX RlBonjourL2Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" An entry in the rlBonjourL2Entry."
INDEX { rlBonjourL2Ifindex }
::= {rlBonjourL2Table 1 }
RlBonjourL2Entry ::= SEQUENCE {
rlBonjourL2Ifindex InterfaceIndex ,
rlBonjourL2RowStatus RowStatus
}
rlBonjourL2Ifindex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This variable identifies the L2 interface."
::= { rlBonjourL2Entry 1 }
rlBonjourL2RowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable identifies the L2 interface status manager."
::= { rlBonjourL2Entry 2 }
rlBonjourL2Mode OBJECT-TYPE
SYNTAX INTEGER {
include (1),
exclude (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"specify whether the L2 interfaces listed in rlBonjourL2Table
means include bonjour on these L2 interfaces once they:
rlBonjourPublish must be on
at least one service should be enabled
L2 must be present and UP
have at least one IP on it
OR exclude bonjour on these L2 interfaces even if they answer to
all the conditions above."
::= {rlBonjour 5 }
rlBonjourInstanceName OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Instance Name is given to Bonjour driver by the project part (L1Manager)
When a conflict occurs: found another station with the same instance name.
Bonjour driver is required to append _m to the given name
while m is an incremental integer, increasing on each conflict"
::= {rlBonjour 6 }
rlBonjourHostName OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Host Name is given to Bonjour driver by the project part (L1Manager)
When a conflict occurs: found another station with the same host name.
Bonjour driver is required to append _m to the given name
while m is an incremental integer, increasing on each conflict"
::= {rlBonjour 7 }
END