mibs/MIBS/linksys/LINKSYS-DOT1X-MIB
2023-12-05 12:25:34 +01:00

1305 lines
45 KiB
Plaintext

LINKSYS-DOT1X-MIB DEFINITIONS ::= BEGIN
-- Title: LINKSYS ROS
-- Private DOT1X MIB
-- Version: 7.46
-- Date: 15-Jan-2007
IMPORTS
rnd FROM LINKSYS-MIB
OBJECT-TYPE, MODULE-IDENTITY, Counter32, Counter64, TimeTicks, Unsigned32 FROM SNMPv2-SMI
TruthValue, RowStatus FROM SNMPv2-TC
VlanIndex, PortList, dot1qFdbId FROM Q-BRIDGE-MIB
MacAddress FROM BRIDGE-MIB
SnmpAdminString FROM SNMP-FRAMEWORK-MIB
PaeControlledPortStatus, dot1xAuthSessionStatsEntry, dot1xPaePortNumber FROM IEEE8021-PAE-MIB;
rldot1x MODULE-IDENTITY
LAST-UPDATED "200701020000Z"
ORGANIZATION "
Linksys LLC."
CONTACT-INFO
"www.linksys.com/business/support"
DESCRIPTION
"This private MIB module defines dot1x private MIBs."
REVISION "200701020000Z"
DESCRIPTION
"Initial revision."
::= { rnd 95 }
rldot1xMibVersion OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MIB's version, the current version is 1."
::= { rldot1x 1 }
rldot1xExtAuthSessionStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF Rldot1xExtAuthSessionStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains the session statistics objects
for the Authenticator PAE associated with each Port.
An entry appears in this table for each port that may
authenticate access to itself."
::= { rldot1x 2 }
rldot1xExtAuthSessionStatsEntry OBJECT-TYPE
SYNTAX Rldot1xExtAuthSessionStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The session statistics information for an Authenticator
PAE. This shows the current values being collected for
each session that is still in progress, or the final
values for the last valid session on each port where
there is no session currently active."
AUGMENTS { dot1xAuthSessionStatsEntry }
::= { rldot1xExtAuthSessionStatsTable 1 }
Rldot1xExtAuthSessionStatsEntry ::= SEQUENCE {
rlDot1xAuthSessionAuthenticMethod INTEGER
}
rlDot1xAuthSessionAuthenticMethod OBJECT-TYPE
SYNTAX INTEGER {
remoteAuthServer(1),
localAuthServer(2),
none(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The authentication method used to establish the
session."
::= { rldot1xExtAuthSessionStatsEntry 1 }
rldot1xGuestVlanSupported OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"indicate if guest vlan is supported."
::= { rldot1x 3 }
rldot1xGuestVlanVID OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"specify the guest vlan tag , 0 for non exiting."
::= { rldot1x 4 }
rldot1xGuestVlanPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the ports that can be members in the guest vlan"
::= { rldot1x 5 }
rldot1xUnAuthenticatedVlanSupported OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"indicate if unauthenticated Vlan is supported."
::= { rldot1x 6 }
rldot1xUnAuthenticatedVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF Rldot1xUnAuthenticatedVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"port belong to vlan in all port authenticated state except force unauthenticated table"
::= { rldot1x 7 }
rldot1xUnAuthenticatedVlanEntry OBJECT-TYPE
SYNTAX Rldot1xUnAuthenticatedVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" port belong to vlan in all port authenticated state except force unauthenticated entry"
INDEX { dot1qFdbId }
::= { rldot1xUnAuthenticatedVlanTable 1 }
Rldot1xUnAuthenticatedVlanEntry ::= SEQUENCE {
rldot1xUnAuthenticatedVlanStatus RowStatus
}
rldot1xUnAuthenticatedVlanStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The row status variable, used according to
row installation and removal conventions."
::= { rldot1xUnAuthenticatedVlanEntry 1 }
rldot1xUserBasedVlanSupported OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"indicate if user based Vlan is supported."
::= { rldot1x 8 }
rldot1xUserBasedVlanPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the ports that can be members in the user based vlan"
::= { rldot1x 9 }
rldot1xAuthenticationPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF Rldot1xAuthenticationPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of system level information for each port
supported by the Port Access Entity. An entry appears
in this table for each port of this system."
::= { rldot1x 10 }
rldot1xAuthenticationPortEntry OBJECT-TYPE
SYNTAX Rldot1xAuthenticationPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Port number and mac method"
INDEX { dot1xPaePortNumber }
::= { rldot1xAuthenticationPortTable 1 }
Rldot1xAuthenticationPortEntry::=
SEQUENCE {
rldot1xAuthenticationPortMethod
INTEGER,
rldot1xRadiusAttrVlanIdEnabled
TruthValue,
rldot1xRadiusAttAclNameEnabled
TruthValue,
rldot1xTimeBasedName
SnmpAdminString,
rldot1xTimeBasedActive
TruthValue,
rldot1xRadiusAttrVlanIdentifier
VlanIndex,
rldot1xMaxHosts
Unsigned32,
rldot1xMaxLoginAttempts
INTEGER,
rldot1xTimeoutSilencePeriod
INTEGER,
rldot1xNumOfAuthorizedHosts
INTEGER
}
rldot1xAuthenticationPortMethod OBJECT-TYPE
SYNTAX INTEGER {
eapolOnly(1),
macAndEapol(2),
macOnly(3),
webOnly(4),
webAndEapol(5),
webAndMac(6),
webAndMacAndEapol(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the 802.1x-based, mac-based and web-based authentication."
DEFVAL { eapolOnly }
::= { rldot1xAuthenticationPortEntry 1 }
rldot1xRadiusAttrVlanIdEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Defines if treat VLAN ID that received from Radius attributes
in Radius-Accept message."
::= { rldot1xAuthenticationPortEntry 2 }
rldot1xRadiusAttAclNameEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Defines if treat ACL Names that received from Radius attributes
in Radius-Accept message."
::= { rldot1xAuthenticationPortEntry 3 }
rldot1xTimeBasedName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies a time range. When the Time Range is not in effect the port state would be Unauthorized."
::= { rldot1xAuthenticationPortEntry 4 }
rldot1xTimeBasedActive OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies if time range is active now or not."
::= { rldot1xAuthenticationPortEntry 5 }
rldot1xRadiusAttrVlanIdentifier OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"In case that value is not 0,
This field will define the VLAN ID in case that it is not received from Radius attributes
in Radius-Accept message."
DEFVAL { 0 }
::= { rldot1xAuthenticationPortEntry 6 }
rldot1xMaxHosts OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Maximum number of authenticated hosts allowed on the interface.
A value of 0 means no limitation."
DEFVAL { 0 }
::= { rldot1xAuthenticationPortEntry 7 }
rldot1xMaxLoginAttempts OBJECT-TYPE
SYNTAX INTEGER (0.. 10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Maximum number of allowedlogin attempts on the interface.
A value of 0 means the infinite number of attemtps.
The configuration is applied only to Web-Based authentication."
DEFVAL { 0 }
::= { rldot1xAuthenticationPortEntry 8 }
rldot1xTimeoutSilencePeriod OBJECT-TYPE
SYNTAX INTEGER (0.. 65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the number of seconds that if an authorized client did not send traffic during this period,
then the client is changed to unauthrized.
The configuration is applied only to Web-Based authentication."
DEFVAL { 0 }
::= { rldot1xAuthenticationPortEntry 9 }
rldot1xNumOfAuthorizedHosts OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of authorized host in multi-sessions mode."
::= { rldot1xAuthenticationPortEntry 10 }
--------------------------------------------------------------
-- The Authenticator Statistics Table
--------------------------------------------------------------
rldot1xAuthMultiStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF Rldot1xAuthMultiStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains the statistics objects for the
Authenticator PAE associated with each Port and MAC for
multisession 802.1x mode of operation.
An entry appears in this table for each port and MAC that have an
authentication session currently running under way for them."
REFERENCE
"9.4.2 Authenticator Statistics"
::= { rldot1x 11 }
rldot1xAuthMultiStatsEntry OBJECT-TYPE
SYNTAX Rldot1xAuthMultiStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The statistics information for an Authenticator PAE."
INDEX { rldot1xAuthMultiStatsPortNumber, rldot1xAuthMultiStatsSourceMac }
::= { rldot1xAuthMultiStatsTable 1 }
Rldot1xAuthMultiStatsEntry ::=
SEQUENCE {
rldot1xAuthMultiStatsPortNumber
INTEGER,
rldot1xAuthMultiStatsSourceMac
MacAddress,
rldot1xAuthMultiEapolFramesRx
Counter32,
rldot1xAuthMultiEapolFramesTx
Counter32,
rldot1xAuthMultiEapolStartFramesRx
Counter32,
rldot1xAuthMultiEapolLogoffFramesRx
Counter32,
rldot1xAuthMultiEapolRespIdFramesRx
Counter32,
rldot1xAuthMultiEapolRespFramesRx
Counter32,
rldot1xAuthMultiEapolReqIdFramesTx
Counter32,
rldot1xAuthMultiEapolReqFramesTx
Counter32,
rldot1xAuthMultiInvalidEapolFramesRx
Counter32,
rldot1xAuthMultiEapLengthErrorFramesRx
Counter32
}
rldot1xAuthMultiStatsPortNumber OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Port Number."
::= { rldot1xAuthMultiStatsEntry 1 }
rldot1xAuthMultiStatsSourceMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Mac of the authentication session."
::= { rldot1xAuthMultiStatsEntry 2 }
rldot1xAuthMultiEapolFramesRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of valid EAPOL frames of any type
that have been received by this Authenticator."
REFERENCE
"9.4.2, EAPOL frames received"
::= { rldot1xAuthMultiStatsEntry 3 }
rldot1xAuthMultiEapolFramesTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of EAPOL frames of any type
that have been transmitted by this Authenticator."
REFERENCE
"9.4.2, EAPOL frames transmitted"
::= { rldot1xAuthMultiStatsEntry 4 }
rldot1xAuthMultiEapolStartFramesRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of EAPOL Start frames that have
been received by this Authenticator."
REFERENCE
"9.4.2, EAPOL Start frames received"
::= { rldot1xAuthMultiStatsEntry 5 }
rldot1xAuthMultiEapolLogoffFramesRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of EAPOL Logoff frames that have
been received by this Authenticator."
REFERENCE
"9.4.2, EAPOL Logoff frames received"
::= { rldot1xAuthMultiStatsEntry 6 }
rldot1xAuthMultiEapolRespIdFramesRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of EAP Resp/Id frames that have
been received by this Authenticator."
REFERENCE
"9.4.2, EAPOL Resp/Id frames received"
::= { rldot1xAuthMultiStatsEntry 7 }
rldot1xAuthMultiEapolRespFramesRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of valid EAP Response frames
(other than Resp/Id frames) that have been
received by this Authenticator."
REFERENCE
"9.4.2, EAPOL Response frames received"
::= { rldot1xAuthMultiStatsEntry 8 }
rldot1xAuthMultiEapolReqIdFramesTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of EAP Req/Id frames that have been
transmitted by this Authenticator."
REFERENCE
"9.4.2, EAPOL Req/Id frames transmitted"
::= { rldot1xAuthMultiStatsEntry 9 }
rldot1xAuthMultiEapolReqFramesTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of EAP Request frames
(other than Rq/Id frames) that have been
transmitted by this Authenticator."
REFERENCE
"9.4.2, EAPOL Request frames transmitted"
::= { rldot1xAuthMultiStatsEntry 10 }
rldot1xAuthMultiInvalidEapolFramesRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of EAPOL frames that have been
received by this Authenticator in which the
frame type is not recognized."
REFERENCE
"9.4.2, Invalid EAPOL frames received"
::= { rldot1xAuthMultiStatsEntry 11 }
rldot1xAuthMultiEapLengthErrorFramesRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of EAPOL frames that have been received
by this Authenticator in which the Packet Body
Length field is invalid."
REFERENCE
"9.4.2, EAP length error frames received"
::= { rldot1xAuthMultiStatsEntry 12 }
--------------------------------------------------------------
-- The Authenticator Diagnostics Table
--------------------------------------------------------------
rldot1xAuthMultiDiagTable OBJECT-TYPE
SYNTAX SEQUENCE OF Rldot1xAuthMultiDiagEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains the diagnostics objects for the
Authenticator PAE associated with each Port and MAC.
An entry appears in this table for each port and MAC that have an
authentication session currently running under way for them."
REFERENCE
"9.4.3 Authenticator Diagnostics"
::= { rldot1x 12 }
rldot1xAuthMultiDiagEntry OBJECT-TYPE
SYNTAX Rldot1xAuthMultiDiagEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The diagnostics information for an Authenticator PAE."
INDEX { rldot1xAuthMultiDiagPortNumber, rldot1xAuthMultiDiagSourceMac }
::= { rldot1xAuthMultiDiagTable 1 }
Rldot1xAuthMultiDiagEntry ::=
SEQUENCE {
rldot1xAuthMultiDiagPortNumber
INTEGER,
rldot1xAuthMultiDiagSourceMac
MacAddress,
rldot1xAuthMultiEntersConnecting
Counter32,
---------- rldot1xAuthMultiEapLogoffsWhileConnecting
---------- Counter32,
rldot1xAuthMultiEntersAuthenticating
Counter32,
rldot1xAuthMultiAuthSuccessWhileAuthenticating
Counter32,
---------- rldot1xAuthMultiAuthTimeoutsWhileAuthenticating
---------- Counter32,
rldot1xAuthMultiAuthFailWhileAuthenticating
Counter32,
rldot1xAuthMultiAuthReauthsWhileAuthenticating
Counter32,
rldot1xAuthMultiAuthEapStartsWhileAuthenticating
Counter32,
---------- rldot1xAuthMultiAuthEapLogoffWhileAuthenticating
---------- Counter32,
rldot1xAuthMultiAuthReauthsWhileAuthenticated
Counter32,
rldot1xAuthMultiAuthEapStartsWhileAuthenticated
Counter32,
---------- rldot1xAuthMultiAuthEapLogoffWhileAuthenticated
---------- Counter32,
rldot1xAuthMultiBackendResponses
Counter32,
rldot1xAuthMultiBackendAccessChallenges
Counter32,
rldot1xAuthMultiBackendOtherRequestsToSupplicant
Counter32,
rldot1xAuthMultiBackendNonNakResponsesFromSupplicant
Counter32,
rldot1xAuthMultiBackendAuthSuccesses
Counter32
---------- rldot1xAuthMultiBackendAuthFails
---------- Counter32
}
rldot1xAuthMultiDiagPortNumber OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Port Number."
::= { rldot1xAuthMultiDiagEntry 1 }
rldot1xAuthMultiDiagSourceMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Mac of the authentication session."
::= { rldot1xAuthMultiDiagEntry 2 }
rldot1xAuthMultiEntersConnecting OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counts the number of times that the state machine
transitions to the CONNECTING state from any other
state."
REFERENCE
"9.4.2, 8.5.4.2.1"
::= { rldot1xAuthMultiDiagEntry 3 }
rldot1xAuthMultiEntersAuthenticating OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counts the number of times that the state machine
transitions from CONNECTING to AUTHENTICATING, as a
result of an EAP-Response/Identity message being
received from the Supplicant."
REFERENCE
"9.4.2, 8.5.4.2.3"
::= { rldot1xAuthMultiDiagEntry 4 }
rldot1xAuthMultiAuthSuccessWhileAuthenticating OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counts the number of times that the state machine
transitions from AUTHENTICATING to AUTHENTICATED, as a
result of the Backend Authentication state machine
indicating successful authentication of the Supplicant
(authSuccess = TRUE)."
REFERENCE
"9.4.2, 8.5.4.2.4"
::= { rldot1xAuthMultiDiagEntry 5 }
rldot1xAuthMultiAuthFailWhileAuthenticating OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counts the number of times that the state machine
transitions from AUTHENTICATING to HELD, as a result
of the Backend Authentication state machine indicating
authentication failure (authFail = TRUE)."
REFERENCE
"9.4.2, 8.5.4.2.6"
::= { rldot1xAuthMultiDiagEntry 6 }
rldot1xAuthMultiAuthReauthsWhileAuthenticating OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counts the number of times that the state machine
transitions from AUTHENTICATING to ABORTING, as a result
of a reauthentication request (reAuthenticate = TRUE)."
REFERENCE
"9.4.2, 8.5.4.2.7"
::= { rldot1xAuthMultiDiagEntry 7 }
rldot1xAuthMultiAuthEapStartsWhileAuthenticating OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counts the number of times that the state machine
transitions from AUTHENTICATING to ABORTING, as a result
of an EAPOL-Start message being received
from the Supplicant."
REFERENCE
"9.4.2, 8.5.4.2.8"
::= { rldot1xAuthMultiDiagEntry 8 }
rldot1xAuthMultiAuthReauthsWhileAuthenticated OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counts the number of times that the state machine
transitions from AUTHENTICATED to CONNECTING, as a
result of a reauthentication request
(reAuthenticate = TRUE)."
REFERENCE
"9.4.2, 8.5.4.2.10"
::= { rldot1xAuthMultiDiagEntry 9 }
rldot1xAuthMultiAuthEapStartsWhileAuthenticated OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counts the number of times that the state machine
transitions from AUTHENTICATED to CONNECTING, as a
result of an EAPOL-Start message being received from the
Supplicant."
REFERENCE
"9.4.2, 8.5.4.2.11"
::= { rldot1xAuthMultiDiagEntry 10 }
rldot1xAuthMultiBackendResponses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counts the number of times that the state machine sends
an initial Access-Request packet to the Authentication
server (i.e., executes sendRespToServer on entry to the
RESPONSE state). Indicates that the Authenticator
attempted communication with the Authentication Server."
REFERENCE
"9.4.2, 8.5.6.2.1"
::= { rldot1xAuthMultiDiagEntry 11 }
rldot1xAuthMultiBackendAccessChallenges OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counts the number of times that the state machine
receives an initial Access-Challenge packet from the
Authentication server (i.e., aReq becomes TRUE,
causing exit from the RESPONSE state). Indicates that
the Authentication Server has communication with
the Authenticator."
REFERENCE
"9.4.2, 8.5.6.2.2"
::= { rldot1xAuthMultiDiagEntry 12 }
rldot1xAuthMultiBackendOtherRequestsToSupplicant OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counts the number of times that the state machine
sends an EAP-Request packet (other than an Identity,
Notification, Failure or Success message) to the
Supplicant (i.e., executes txReq on entry to the
REQUEST state). Indicates that the Authenticator chose
an EAP-method."
REFERENCE
"9.4.2, 8.5.6.2.3"
::= { rldot1xAuthMultiDiagEntry 13 }
rldot1xAuthMultiBackendNonNakResponsesFromSupplicant OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counts the number of times that the state machine
receives a response from the Supplicant to an initial
EAP-Request, and the response is something other than
EAP-NAK (i.e., rxResp becomes TRUE, causing the state
machine to transition from REQUEST to RESPONSE,
and the response is not an EAP-NAK). Indicates that
the Supplicant can respond to the Authenticators
chosen EAP-method."
REFERENCE
"9.4.2, 8.5.6.2.4"
::= { rldot1xAuthMultiDiagEntry 14 }
rldot1xAuthMultiBackendAuthSuccesses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counts the number of times that the state machine
receives an EAP-Success message from the Authentication
Server (i.e., aSuccess becomes TRUE, causing a
transition from RESPONSE to SUCCESS). Indicates that
the Supplicant has successfully authenticated to
the Authentication Server."
REFERENCE
"9.4.2, 8.5.6.2.5"
::= { rldot1xAuthMultiDiagEntry 15 }
--------------------------------------------------------------
-- The Authenticator Session Statistics Table
--------------------------------------------------------------
rldot1xAuthMultiSessionStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF Rldot1xAuthMultiSessionStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains the session statistics objects
for the Authenticator PAE associated with each Port.
An entry appears in this table for each port that may
authenticate access to itself."
REFERENCE
"9.4.4"
::= { rldot1x 13 }
rldot1xAuthMultiSessionStatsEntry OBJECT-TYPE
SYNTAX Rldot1xAuthMultiSessionStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The session statistics information for an Authenticator
PAE. This shows the current values being collected for
each session that is still in progress, or the final
values for the last valid session on each port where
there is no session currently active."
INDEX { rldot1xAuthMultiSessionStatsPortNumber,
rldot1xAuthMultiSessionStatsSourceMac }
::= { rldot1xAuthMultiSessionStatsTable 1 }
Rldot1xAuthMultiSessionStatsEntry ::=
SEQUENCE {
rldot1xAuthMultiSessionStatsPortNumber
INTEGER,
rldot1xAuthMultiSessionStatsSourceMac
MacAddress,
rldot1xAuthMultiSessionOctetsRx
Counter64,
rldot1xAuthMultiSessionOctetsTx
Counter64,
rldot1xAuthMultiSessionFramesRx
Counter32,
rldot1xAuthMultiSessionFramesTx
Counter32,
rldot1xAuthMultiSessionId
SnmpAdminString,
---------- rldot1xAuthMultiSessionAuthenticMethod
---------- INTEGER,
rldot1xAuthMultiSessionTime
TimeTicks,
---------- rldot1xAuthMultiSessionTerminateCause
---------- INTEGER,
rldot1xAuthMultiSessionUserName
SnmpAdminString,
rldot1xAuthMultiSessionRadiusAttrVlan
INTEGER,
rldot1xAuthMultiSessionRadiusAttrFilterId
SnmpAdminString,
rldot1xAuthMultiSessionRadiusAttrSecondFilterId
SnmpAdminString,
rlDot1xAuthMultiSessionMonitorResultsReason
INTEGER,
rlDot1xAuthMultiSessionMethodType
INTEGER }
rldot1xAuthMultiSessionStatsPortNumber OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Port Number."
::= { rldot1xAuthMultiSessionStatsEntry 1 }
rldot1xAuthMultiSessionStatsSourceMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Mac of the authentication session."
::= { rldot1xAuthMultiSessionStatsEntry 2 }
rldot1xAuthMultiSessionOctetsRx OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets received in user data
frames on this Port during the session."
REFERENCE
"9.4.4, Session Octets Received"
::= { rldot1xAuthMultiSessionStatsEntry 3 }
rldot1xAuthMultiSessionOctetsTx OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets transmitted in user data
frames on this Port during the session."
REFERENCE
"9.4.4, Session Octets Transmitted"
::= { rldot1xAuthMultiSessionStatsEntry 4 }
rldot1xAuthMultiSessionFramesRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of user data frames received
on this Port during the session."
REFERENCE
"9.4.4, Session Frames Received"
::= { rldot1xAuthMultiSessionStatsEntry 5 }
rldot1xAuthMultiSessionFramesTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of user data frames transmitted
on this Port during the session."
REFERENCE
"9.4.4, Session Frames Transmitted"
::= { rldot1xAuthMultiSessionStatsEntry 6 }
rldot1xAuthMultiSessionId OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A unique identifier for the session, in the
form of a printable ASCII string of at least
three characters."
REFERENCE
"9.4.4, Session Identifier"
::= { rldot1xAuthMultiSessionStatsEntry 7 }
rldot1xAuthMultiSessionTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The duration of the session in seconds."
REFERENCE
"9.4.4, Session Time"
::= { rldot1xAuthMultiSessionStatsEntry 8 }
rldot1xAuthMultiSessionUserName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The User-Name representing the identity of the
Supplicant PAE."
REFERENCE
"9.4.4, Session User Name"
::= { rldot1xAuthMultiSessionStatsEntry 9 }
rldot1xAuthMultiSessionRadiusAttrVlan OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VLAN ID that received from Radius attributes."
::= { rldot1xAuthMultiSessionStatsEntry 10 }
rldot1xAuthMultiSessionRadiusAttrFilterId OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"First filter ID that received from Radius attributes."
::= { rldot1xAuthMultiSessionStatsEntry 11 }
rldot1xAuthMultiSessionRadiusAttrSecondFilterId OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Second filter ID that received from Radius attributes."
::= { rldot1xAuthMultiSessionStatsEntry 12 }
rlDot1xAuthMultiSessionMonitorResultsReason OBJECT-TYPE
SYNTAX INTEGER {
notRejected(0),
aclNotExst(1), -- ACL sent by radius Server does not exist on the device
aclOvrfl(2), -- ACL sent by radius server can not be applied because of TCAM overflow
authErr(3), -- Rejected by Radius due wrong user name or password in Radius server
fltrErr(4), -- Radius accept message contains more than 2 filter-id
ipv6WithMac(5), -- Radius accept message contains filter with IPv6 DIP and MAC addresses
ipv6WithNotIp(6), -- Radius accept message contains IPv6 and not IP simultaneously
polBasicMode(7), -- Policy Map is not supported in the QoS basic mode
aclDel(8), -- ACL was deleted by user
polDel(9), -- Policy Map was deleted by user
vlanDfly(10), -- VLAN sent by radius server can not be applied because it is the Default VLAN
vlanDynam(11), -- VLAN sent by radius server can not be applied because it is a Dynamic VLAN
vlanGuest(12), -- VLAN sent by radius server can not be applied because it is the Guest VLAN
vlanNoInMsg(13), -- VLAN was not sent by Radius
vlanNotExst(14), -- VLAN sent by radius Server does not exist on the device
vlanOvfl(15), -- VLAN sent by radius server can not be applied because of TCAM overflow
vlanVoice(16), -- VLAN sent by radius server can not be applied because it is a Voice VLAN
vlanUnauth(17), -- VLAN sent by radius server can not be applied because it is a
-- Unauthenticated VLAN
frsMthDeny(18), -- First method is "deny"
radApierr(19), -- RADIUS API returned error (e.g. No RADIUS server is configured).
radInvlres(20), -- RADIUS server returned invalid packet (e.g. EAP Attribute is missing)
radNoresp(21), -- RADIUS server is not responding
aclEgress(22), -- ACL sent by radius Server is already bound as egress acl
maxHosts(23), -- Max hosts allowed per port are reached
noActivity(24) -- There is no traffic from this host
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The monitor result reason of the session."
::= { rldot1xAuthMultiSessionStatsEntry 13 }
rlDot1xAuthMultiSessionMethodType OBJECT-TYPE
SYNTAX INTEGER {
eapol(1),
mac(2),
web(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current session method type."
::= { rldot1xAuthMultiSessionStatsEntry 14 }
--------------------------------------------------------------
-- The Authenticator Configuration Table
--------------------------------------------------------------
rldot1xAuthMultiConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF Rldot1xAuthMultiConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains the configuration objects for the
Authenticator PAE associated with each port and MAC.
An entry appears in this table for each port and MAC that may
authenticate access to itself."
REFERENCE
"9.4.1 Authenticator Configuration"
::= { rldot1x 14 }
rldot1xAuthMultiConfigEntry OBJECT-TYPE
SYNTAX Rldot1xAuthMultiConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The configuration information for an Authenticator
PAE."
INDEX { rldot1xAuthMultiPortNumber, rldot1xAuthMultiSourceMac }
::= { rldot1xAuthMultiConfigTable 1 }
Rldot1xAuthMultiConfigEntry ::=
SEQUENCE {
rldot1xAuthMultiPortNumber
INTEGER,
rldot1xAuthMultiSourceMac
MacAddress,
rldot1xAuthMultiPaeState
INTEGER,
rldot1xAuthMultiBackendAuthState
INTEGER,
rldot1xAuthMultiControlledPortStatus
PaeControlledPortStatus
}
rldot1xAuthMultiPortNumber OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Port Number."
::= { rldot1xAuthMultiConfigEntry 1 }
rldot1xAuthMultiSourceMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Mac of the authentication session."
::= { rldot1xAuthMultiConfigEntry 2 }
rldot1xAuthMultiPaeState OBJECT-TYPE
SYNTAX INTEGER {
initialize(1),
disconnected(2),
connecting(3),
authenticating(4),
authenticated(5),
aborting(6),
held(7),
forceAuth(8),
forceUnauth(9)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current value of the Authenticator PAE state
machine."
REFERENCE
"9.4.1, Authenticator PAE state"
::= { rldot1xAuthMultiConfigEntry 3 }
rldot1xAuthMultiBackendAuthState OBJECT-TYPE
SYNTAX INTEGER {
request(1),
response(2),
success(3),
fail(4),
timeout(5),
idle(6),
initialize(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current state of the Backend Authentication
state machine."
REFERENCE
"9.4.1, Backend Authentication state"
::= { rldot1xAuthMultiConfigEntry 4 }
rldot1xAuthMultiControlledPortStatus OBJECT-TYPE
SYNTAX PaeControlledPortStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current value of the controlled Port
status parameter for the Port."
REFERENCE
"9.4.1, AuthControlledPortStatus"
::= { rldot1xAuthMultiConfigEntry 5 }
rldot1xBpduFilteringEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify that when 802.1x is globally disabled,
802.1x BPDU packets would be filtered or bridged."
::= { rldot1x 15 }
rldot1xRadiusAttributesErrorsAclReject OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify ACL error handling for the Radius attributes feature."
::= { rldot1x 18 }
----------------------------------------------------------------
-- Added guest vlan timeout interval VeredK 15-04-2007, 19:39 --
----------------------------------------------------------------
rldot1xGuestVlanTimeInterval OBJECT-TYPE
SYNTAX INTEGER (0..180)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"indicate the guest vlan timeout interval."
::= { rldot1x 19 }
rldot1xMacAuthSuccessTrapEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify if sending traps when a MAC address is successfully
authenticated by the 802.1X mac-authentication access control."
::= { rldot1x 20 }
rldot1xMacAuthFailureTrapEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify if sending traps when MAC address was failed
in authentication of the 802.1X MAC authentication access control."
::= { rldot1x 21 }
--------------------------------------------------------------
-- The Legacy Port Table
--------------------------------------------------------------
rldot1xLegacyPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF Rldot1xLegacyPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of system level information for each port
supported by the Port Access Entity. An entry appears
in this table for each port of this system."
::= { rldot1x 22 }
rldot1xLegacyPortEntry OBJECT-TYPE
SYNTAX Rldot1xLegacyPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Port number and leagcy mode"
INDEX { dot1xPaePortNumber }
::= { rldot1xLegacyPortTable 1 }
Rldot1xLegacyPortEntry::=
SEQUENCE {
rldot1xLegacyPortModeEnabled
TruthValue
}
rldot1xLegacyPortModeEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether in multiple sessions mode
work according to legacy devices mode or not."
::= { rldot1xLegacyPortEntry 1 }
rldot1xSystemAuthControlMonitorVlan OBJECT-TYPE
SYNTAX INTEGER (0..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"VLAN Tag of 802.1x monitoring VLAN in the System.
value of 0 means that the monitoring mode is disabled."
::= { rldot1x 23 }
rldot1xClearPortMibCounters OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Each bit that is set in this portList represent a port that
its mib counters should be reset."
::= { rldot1x 24 }
rldot1xWebQuietFailureTrapEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify if sending traps when a client is set in quiet state
after the maximum sequential attempts of login."
::= { rldot1x 25 }
rldot1xMacWebAuthSuccessTrapEnabled OBJECT-TYPE
SYNTAX INTEGER {
none(0),
eapolOnly(1),
macAndEapol(2),
macOnly(3),
webOnly(4),
webAndEapol(5),
webAndMac(6),
webAndMacAndEapol(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify if sending traps per authentication method
when a session is successfully authenticated."
::= { rldot1x 26 }
rldot1xMacWebAuthFailureTrapEnabled OBJECT-TYPE
SYNTAX INTEGER {
none(0),
eapolOnly(1),
macAndEapol(2),
macOnly(3),
webOnly(4),
webAndEapol(5),
webAndMac(6),
webAndMacAndEapol(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify if sending traps per authentication method when a session was failed."
::= { rldot1x 27 }
--------------------------------------------------------------
-- The Locked Cients Table
--------------------------------------------------------------
rldot1xLockedCientsTable OBJECT-TYPE
SYNTAX SEQUENCE OF Rldot1xLockedCientsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains the locked clients information for Web-based authentication."
REFERENCE
"9.4.2 Authenticator Statistics"
::= { rldot1x 28 }
rldot1xLockedCientsEntry OBJECT-TYPE
SYNTAX Rldot1xLockedCientsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The locked clients entry that entered silence period timeout for Web-based authentication."
INDEX { rldot1xLockedCientsPortNumber, rldot1xLockedCientsSourceMac }
::= { rldot1xLockedCientsTable 1 }
Rldot1xLockedCientsEntry ::=
SEQUENCE {
rldot1xLockedCientsPortNumber
INTEGER,
rldot1xLockedCientsSourceMac
MacAddress,
rldot1xLockedCientsRemainedTime
INTEGER,
rldot1xLockedCientsRowStatus
RowStatus
}
rldot1xLockedCientsPortNumber OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Port Number."
::= { rldot1xLockedCientsEntry 1 }
rldot1xLockedCientsSourceMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Mac of the locked client."
::= { rldot1xLockedCientsEntry 2 }
rldot1xLockedCientsRemainedTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time that is remained till the expiry of silence period."
::= { rldot1xLockedCientsEntry 3 }
rldot1xLockedCientsRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Row status."
::= { rldot1xLockedCientsEntry 4 }
END