327 lines
11 KiB
Plaintext
327 lines
11 KiB
Plaintext
LINKSYS-HWENVIROMENT DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
rnd FROM LINKSYS-MIB
|
|
MODULE-IDENTITY, OBJECT-TYPE FROM SNMPv2-SMI
|
|
TEXTUAL-CONVENTION, DisplayString FROM SNMPv2-TC;
|
|
|
|
rlEnv MODULE-IDENTITY
|
|
LAST-UPDATED "200309210000Z"
|
|
ORGANIZATION "Linksys LLC."
|
|
CONTACT-INFO
|
|
"www.linksys.com/business/support"
|
|
DESCRIPTION
|
|
"The private MIB module definition for environment of Linksys devices."
|
|
REVISION "200309210000Z"
|
|
DESCRIPTION
|
|
"Added this MODULE-IDENTITY clause."
|
|
::= { rnd 83 }
|
|
|
|
RlEnvMonState ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the state of a device being monitored.
|
|
Valid values are:
|
|
|
|
normal(1): the environment is good, such as low
|
|
temperature.
|
|
|
|
warning(2): the environment is bad, such as temperature
|
|
above normal operation range but not too
|
|
high.
|
|
|
|
critical(3): the environment is very bad, such as
|
|
temperature much higher than normal
|
|
operation limit.
|
|
|
|
shutdown(4): the environment is the worst, the system
|
|
should be shutdown immediately.
|
|
|
|
notPresent(5): the environmental monitor is not present,
|
|
such as temperature sensors do not exist.
|
|
|
|
notFunctioning(6): the environmental monitor does not
|
|
function properly, such as a temperature
|
|
sensor generates a abnormal data like
|
|
1000 C.
|
|
"
|
|
SYNTAX INTEGER {
|
|
normal(1),
|
|
warning(2),
|
|
critical(3),
|
|
shutdown(4),
|
|
notPresent(5),
|
|
notFunctioning(6)
|
|
}
|
|
|
|
RlEnvMonDirection ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the state of a device being monitored.
|
|
Valid values are:
|
|
|
|
unKnown(1): if the board not support air flow direction.
|
|
|
|
frontToBack(2): the air flow direction of the fan is front to back.
|
|
|
|
backToFront(3): the air flow direction of the fan is back to front.
|
|
|
|
clockwise(4): the air flow direction of the fan is clock wise
|
|
|
|
unClockwise(5): the air flow direction of the fan is unclock wise
|
|
|
|
insideOutside(6): the air flow direction of the fan is inside outside
|
|
|
|
outsideInside(7): the air flow direction of the fan is outside inside
|
|
|
|
rightToLeft(8): the air flow direction of the fan is from right to left
|
|
|
|
leftToRight(9): the air flow direction of the fan is from left to right
|
|
|
|
"
|
|
SYNTAX INTEGER {
|
|
unKnown(1),
|
|
frontToBack(2),
|
|
backToFront(3),
|
|
clockwise(4),
|
|
unClockwise(5),
|
|
insideOut(6),
|
|
outsideIn(7),
|
|
rightToLeft(8),
|
|
leftToRight(9)
|
|
}
|
|
|
|
rlEnvPhysicalDescription OBJECT IDENTIFIER ::= { rlEnv 1 }
|
|
|
|
rlEnvMonFanStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlEnvMonFanStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of fan status maintained by the environmental
|
|
monitor."
|
|
::= { rlEnvPhysicalDescription 1 }
|
|
|
|
rlEnvMonFanStatusEntry OBJECT-TYPE
|
|
SYNTAX RlEnvMonFanStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the fan status table, representing the status of
|
|
the associated fan maintained by the environmental monitor."
|
|
INDEX { rlEnvMonFanStatusIndex }
|
|
::= { rlEnvMonFanStatusTable 1 }
|
|
|
|
RlEnvMonFanStatusEntry ::=
|
|
SEQUENCE {
|
|
rlEnvMonFanStatusIndex INTEGER,
|
|
rlEnvMonFanStatusDescr DisplayString,
|
|
rlEnvMonFanState RlEnvMonState
|
|
}
|
|
|
|
rlEnvMonFanStatusIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unique index for the fan being instrumented.
|
|
This index is for SNMP purposes only, and has no
|
|
intrinsic meaning."
|
|
::= { rlEnvMonFanStatusEntry 1 }
|
|
|
|
rlEnvMonFanStatusDescr OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-only
|
|
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Textual description of the fan being instrumented.
|
|
This description is a short textual label, suitable as a
|
|
human-sensible identification for the rest of the
|
|
information in the entry."
|
|
::= { rlEnvMonFanStatusEntry 2 }
|
|
|
|
rlEnvMonFanState OBJECT-TYPE
|
|
SYNTAX RlEnvMonState
|
|
MAX-ACCESS read-only
|
|
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mandatory state of the fan being instrumented."
|
|
::= { rlEnvMonFanStatusEntry 3 }
|
|
|
|
|
|
|
|
rlEnvMonSupplyStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlEnvMonSupplyStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of power supply status maintained by the
|
|
environmental monitor card."
|
|
::= { rlEnvPhysicalDescription 2 }
|
|
|
|
rlEnvMonSupplyStatusEntry OBJECT-TYPE
|
|
SYNTAX RlEnvMonSupplyStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the power supply status table, representing the
|
|
status of the associated power supply maintained by the
|
|
environmental monitor card."
|
|
INDEX { rlEnvMonSupplyStatusIndex }
|
|
::= { rlEnvMonSupplyStatusTable 1 }
|
|
|
|
RlEnvMonSupplyStatusEntry ::=
|
|
SEQUENCE {
|
|
rlEnvMonSupplyStatusIndex INTEGER ,
|
|
rlEnvMonSupplyStatusDescr DisplayString,
|
|
rlEnvMonSupplyState RlEnvMonState,
|
|
rlEnvMonSupplySource INTEGER,
|
|
rlEnvMonSupplyFanDirection RlEnvMonDirection
|
|
}
|
|
|
|
rlEnvMonSupplyStatusIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unique index for the power supply being instrumented.
|
|
This index is for SNMP purposes only, and has no
|
|
intrinsic meaning."
|
|
::= { rlEnvMonSupplyStatusEntry 1 }
|
|
|
|
rlEnvMonSupplyStatusDescr OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-only
|
|
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Textual description of the power supply being instrumented.
|
|
This description is a short textual label, suitable as a
|
|
human-sensible identification for the rest of the
|
|
information in the entry."
|
|
::= { rlEnvMonSupplyStatusEntry 2 }
|
|
|
|
rlEnvMonSupplyState OBJECT-TYPE
|
|
SYNTAX RlEnvMonState
|
|
MAX-ACCESS read-only
|
|
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mandatory state of the power supply being instrumented."
|
|
::= { rlEnvMonSupplyStatusEntry 3 }
|
|
|
|
rlEnvMonSupplySource OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(1),
|
|
ac(2),
|
|
dc(3),
|
|
externalPowerSupply(4),
|
|
internalRedundant(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The power supply source.
|
|
unknown - Power supply source unknown
|
|
ac - AC power supply
|
|
dc - DC power supply
|
|
externalPowerSupply - External power supply
|
|
internalRedundant - Internal redundant power supply
|
|
"
|
|
::= { rlEnvMonSupplyStatusEntry 4 }
|
|
|
|
rlEnvMonSupplyFanDirection OBJECT-TYPE
|
|
SYNTAX RlEnvMonDirection
|
|
MAX-ACCESS read-only
|
|
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The direction of the power supply's fan."
|
|
::= { rlEnvMonSupplyStatusEntry 5 }
|
|
|
|
rlEnvFanData OBJECT IDENTIFIER ::= { rlEnv 5 }
|
|
|
|
rlEnvFanDataTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlEnvFanDataEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"For each unit in a stack"
|
|
::= { rlEnvFanData 1 }
|
|
|
|
rlEnvFanDataEntry OBJECT-TYPE
|
|
SYNTAX RlEnvFanDataEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of this table specifies a unit"
|
|
INDEX { rlEnvFanDataStackUnit }
|
|
::= { rlEnvFanDataTable 1 }
|
|
|
|
RlEnvFanDataEntry ::= SEQUENCE {
|
|
rlEnvFanDataStackUnit INTEGER,
|
|
rlEnvFanDataTemp INTEGER,
|
|
rlEnvFanDataSpeed INTEGER,
|
|
rlEnvFanDataOperLevel INTEGER,
|
|
rlEnvFanDataAdminLevel INTEGER,
|
|
rlEnvFanDataDirection RlEnvMonDirection
|
|
}
|
|
|
|
rlEnvFanDataStackUnit OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of the stack unit"
|
|
::= { rlEnvFanDataEntry 1 }
|
|
|
|
rlEnvFanDataTemp OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The unit temperature"
|
|
::= { rlEnvFanDataEntry 2 }
|
|
|
|
rlEnvFanDataSpeed OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Fan speed in RPM"
|
|
::= { rlEnvFanDataEntry 3 }
|
|
|
|
rlEnvFanDataOperLevel OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Fan speed operative level"
|
|
::= { rlEnvFanDataEntry 4 }
|
|
|
|
rlEnvFanDataAdminLevel OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configured fan speed level"
|
|
::= { rlEnvFanDataEntry 5 }
|
|
|
|
rlEnvFanDataDirection OBJECT-TYPE
|
|
SYNTAX RlEnvMonDirection
|
|
MAX-ACCESS read-only
|
|
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The direction of the system's fan."
|
|
::= { rlEnvFanDataEntry 6 }
|
|
|
|
END
|
|
|