mibs/MIBS/meinberg/MBG-SNMP-LTNG-MIB
2023-12-05 12:25:34 +01:00

4650 lines
122 KiB
Plaintext

MBG-SNMP-LTNG-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE , Integer32, Unsigned32, Counter64, NOTIFICATION-TYPE
FROM SNMPv2-SMI
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
FROM SNMPv2-CONF
DisplayString
FROM SNMPv2-TC
mbgSnmpRoot, MeinbergSwitch
FROM MBG-SNMP-ROOT-MIB;
mbgLantimeNG MODULE-IDENTITY
LAST-UPDATED "201605180517Z"
ORGANIZATION "Meinberg Radio Clocks GmbH & Co. KG"
CONTACT-INFO
"postal: Meinberg Funkuhren
Lange Wand 9
31812 Bad Pyrmont
Germany
email: info@meinberg.de
web: http://www.meinberg.de
tel: +49 (0) 52 81 / 93 09 - 0
fax: +49 (0) 52 81 / 93 09 - 30"
DESCRIPTION
" Meinberg LANTIME SNMP Management Information Base "
REVISION "201605180517Z"
DESCRIPTION
" Rev 6.20.001 18 Mai 2015 05:17 UTC Philipp Rahns
Added traps mbgLtNgTrapFDMOk, mbgLtNgTrapNTPOffsetLimitExceeded and
mbgLtNgTrapNTPOffsetLimitOk"
REVISION "201508270844Z"
DESCRIPTION
" Rev 6.18.005 27 August 2015 08:44 UTC Philipp Rahns
Added mbgLtNgCpuSerialNumber object."
REVISION "201504170632Z"
DESCRIPTION
" Rev 6.17.xxx 17 April 2015 06:32 UTC Philipp Rahns
Added / updated new PTP configuration objects.
Added trap mbgLtNgTrapSHSTimeLimitOk.
Added object mbgLtNgCmdSetTime.
Added trap mbgLtNgTrapIMSError.
Added trap mbgLtNgTrapIMSOk.
Added sendTestNotification command."
REVISION "201411250724Z"
DESCRIPTION
" Rev 6.16.006 25 November 2014 07:24 UTC Philipp Rahns
Added mbgLtNgTrapSufficientSystemResources trap."
REVISION "201408290810Z"
DESCRIPTION
" Rev 6.16.001 29 August 2014 08:10 UTC Philipp Rahns
Added support for MRS input references.
Fixed power supply detection and state."
REVISION "201401300919Z"
DESCRIPTION
" Rev 6.15.016 30 January 2014 09:19 UTC Philipp Rahns
Fixed datatypes in MbgLtNgCfgPtpTableEntry."
REVISION "201311010939Z"
DESCRIPTION
" Rev 6.15.011 01 November 2013 09:39 UTC Philipp Rahns
Added cluster traps."
REVISION "201310091150Z"
DESCRIPTION
" Rev 6.15.010 09 October 2013 11:50 UTC Philipp Rahns
Added NTP client counter objects concerning statistics.
Added external NTP server and its offset when MRS.
Additional GPS related information.
Added traps.
Redesigned PTP port state table."
REVISION "201310010810Z"
DESCRIPTION
" Rev 6.14.020 07 October 2013 08:10 UTC Philipp Rahns
Added GRC180 refclock support.
Added object mbgLtNgRefclockTimeDiff.
Added object mbgLtNgRefclockGpsPos."
REVISION "201309181216Z"
DESCRIPTION
" Rev 6.14.019 18 September 2013 12:16 UTC Philipp Rahns
Fixed PTP port states"
REVISION "201302200700Z"
DESCRIPTION
" Rev 6.14.012 20 February 2013 07:00 UTC Philipp Rahns
Added objects for physical ethernet port link state"
REVISION "201211071420Z"
DESCRIPTION
" Rev 6.14.009 07 November 2012 14:20 UTC Philipp Rahns
Changed FDM frequency units"
REVISION "201203300713Z"
DESCRIPTION
" Rev 6.14.001 30 March 2012 07:13 UTC Philipp Rahns
Added object mbgLtNgRefclockLeapSecondDate"
REVISION "201201250745Z"
DESCRIPTION
" Rev 6.14.001 25 January 2012 07:45 UTC Philipp Rahns
Added trap object mbgLtNgTrapCertificateExpired.
Split MIB in root-mib-header and sub-mibs. Changed MIB module name."
REVISION "201109120818Z"
DESCRIPTION
" Rev 6.12.002 12 September 2011 08:18 UTC Philipp Rahns
Added object mbgLtNgSubagentTimeticks"
REVISION "201109021110Z"
DESCRIPTION
" Rev 6.10.012 01 September 2011 11:10 UTC Philipp Rahns
Changed mbgLtNgNtp objects"
REVISION "201106210930Z"
DESCRIPTION
" Rev 6.10.009 21 June 2011 09:30 UTC Philipp Rahns
Added cluster support."
REVISION "201105201000Z"
DESCRIPTION
" Rev 6.10.006 20 May 2011 10:00 UTC Philipp Rahns
Changed default value of 'mbgLtNgSysNumberOfPowerSupplies'
from '0' to '1'."
REVISION "201105161330Z"
DESCRIPTION
" Rev 6.10.005 16 May 2011 13:30 UTC Philipp Rahns
Initial MIB version for LANTIME V6."
::= { mbgSnmpRoot 30 }
mbgLantimeNGStatus OBJECT IDENTIFIER ::= { mbgLantimeNG 0 }
--- General LANTIME information objects
mbgLtNgInfo OBJECT IDENTIFIER ::= { mbgLantimeNGStatus 0 }
mbgLtNgSnmpSubagentVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"version of this SNMP subagent"
DEFVAL { "n/a" }
::= { mbgLtNgInfo 1 }
mbgLtNgFirmwareVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"installed LANTIME firmware version"
DEFVAL { "n/a" }
::= { mbgLtNgInfo 2 }
mbgLtNgSerialNumber OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LANTIME serial number"
DEFVAL { "n/a" }
::= { mbgLtNgInfo 3 }
mbgLtNgSubagentTimeticks OBJECT-TYPE
SYNTAX Counter64
UNITS "sec"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Subdaemons' time alive in seconds"
DEFVAL { 0 }
::= { mbgLtNgInfo 4 }
mbgLtNgCpuSerialNumber OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"CPU's serial number"
DEFVAL { "n/a" }
::= { mbgLtNgInfo 5 }
--
-- Lantime Refclock information
--
mbgLtNgRefclock OBJECT IDENTIFIER ::= { mbgLantimeNGStatus 1 }
--- Refclock information table start
mbgLtNgNumberOfRefclocks OBJECT-TYPE
SYNTAX Unsigned32 (0..2)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"currently installed number of refclocks"
DEFVAL { 0 }
::= { mbgLtNgRefclock 1 }
mbgLtNgRefclockTable OBJECT-TYPE
SYNTAX SEQUENCE OF MbgLtNgRefclockTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"a table of refclock related variables"
::= { mbgLtNgRefclock 2 }
mbgLtNgRefclockTableEntry OBJECT-TYPE
SYNTAX MbgLtNgRefclockTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"a list of objects pertaining to a refclock"
INDEX { mbgLtNgRefclockIndex }
::= { mbgLtNgRefclockTable 1 }
MbgLtNgRefclockTableEntry ::=
SEQUENCE {
mbgLtNgRefclockIndex Unsigned32,
mbgLtNgRefclockType INTEGER,
mbgLtNgRefclockUsage INTEGER,
mbgLtNgRefclockState INTEGER,
mbgLtNgRefclockSubstate INTEGER,
mbgLtNgRefclockStatusA Unsigned32,
mbgLtNgRefclockMaxStatusA Unsigned32,
mbgLtNgRefclockStatusB Unsigned32,
mbgLtNgRefclockMaxStatusB Unsigned32,
mbgLtNgRefclockAdditionalInfo INTEGER,
mbgLtNgRefclockLeapSecondDate DisplayString
}
mbgLtNgRefclockIndex OBJECT-TYPE
SYNTAX Unsigned32(1..2)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"index for refclock"
::= { mbgLtNgRefclockTableEntry 1 }
mbgLtNgRefclockType OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
gps166(1),
gps167(2),
gps167SV(3),
gps167PC(4),
gps167PCI(5),
gps163(6),
gps168PCI(7),
gps161(8),
gps169PCI(9),
tcr167PCI(10),
gps164(11),
gps170PCI(12),
pzf511(13),
gps170(14),
tcr511(15),
am511(16),
msf511(17),
grc170(18),
gps170PEX(19),
gps162(20),
ptp270PEX(21),
frc511PEX(22),
gen170(23),
tcr170PEX(24),
wwvb511(25),
mgr170(26),
jjy511(27),
pzf600(28),
tcr600(29),
gps180(30),
gln170(31),
gps180PEX(32),
tcr180PEX(33),
pzf180PEX(34),
mgr180(35),
msf600(36),
wwvb600(37),
jjy600(38),
gps180HS(39),
gps180AMC(40),
esi180(41),
cpe180(42),
lno180(43),
grc180(44),
liu(45),
dcf600HS(46),
dcf600RS(47),
mri(48),
bpe(49),
gln180Pex(50),
n2x(51),
rsc180(52),
lneGb(53),
lnePpg180(54),
scg(55),
mdu300(56),
sdi(57),
fdm180(58),
spt(59),
pzf180(60),
rel1000(61)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"type of refclock"
DEFVAL { 0 }
::= { mbgLtNgRefclockTableEntry 2 }
mbgLtNgRefclockUsage OBJECT-TYPE
SYNTAX INTEGER {
notAvailable(0),
secondary(1),
compare(2),
primary(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"what this refclock is used for"
DEFVAL { 0 }
::= { mbgLtNgRefclockTableEntry 3 }
mbgLtNgRefclockState OBJECT-TYPE
SYNTAX INTEGER {
notAvailable(0),
synchronized(1),
notSynchronized(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"state of GPS refclock conneted to NTP time server as value
0: not available
1: synchronized
2: not synchronized"
DEFVAL { 0 }
::= { mbgLtNgRefclockTableEntry 4 }
mbgLtNgRefclockSubstate OBJECT-TYPE
SYNTAX INTEGER{
mrsRefNone(-1),
notAvailable(0),
gpsSync(1),
gpsTracking(2),
gpsAntennaDisconnected(3),
gpsWarmBoot(4),
gpsColdBoot(5),
gpsAntennaShortCircuit(6),
lwNeverSync(50),
lwNotSync(51),
lwSync(52),
tcrNotSync(100),
tcrSync(101),
mrsGpsSync(150),
mrs10MhzSync(151),
mrsPpsInSync(152),
mrs10MhzPpsInSync(153),
mrsIrigSync(154),
mrsNtpSync(155),
mrsPtpIeee1588Sync(156),
mrsPtpOverE1Sync(157),
mrsFixedFreqInSync(158),
mrsPpsStringSync(159),
mrsVarFreqGpioSync(160),
mrsReserved(161),
mrsDcf77PzfSync(162),
mrsLongwaveSync(163),
mrsGlonassGpsSync(164),
mrsHavequickSync(165),
mrsExtOscSync(166),
mrsIntOscSync(167)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"more detailed state depending on refclock type
0: no substate available
gps: 1-4
long waves (PZF,WWVB,MSF,...): 50-52 (not supported by all types)
irig: 100-101"
DEFVAL { 0 }
::= { mbgLtNgRefclockTableEntry 5 }
mbgLtNgRefclockStatusA OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"status A depending on reflcock
gps : indicates number of good satellites in view
long wave
- pzf : correlation
- other : not supported
irig : not supported"
DEFVAL { 0 }
::= { mbgLtNgRefclockTableEntry 6 }
mbgLtNgRefclockMaxStatusA OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"maximum status A depending on reflcock
gps : indicates number of satellites in view
long wave
- pzf : 100
- other : not supported
irig : not supported"
DEFVAL { 0 }
::= { mbgLtNgRefclockTableEntry 7 }
mbgLtNgRefclockStatusB OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"maximum status B depending on reflcock
gps : not supported
long wave
- all : field strength
irig : not supported"
DEFVAL { 0 }
::= { mbgLtNgRefclockTableEntry 8 }
mbgLtNgRefclockMaxStatusB OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"maximum status B depending on reflcock
gps : not supported
long wave
- all : 100
irig : not supported"
DEFVAL { 0 }
::= { mbgLtNgRefclockTableEntry 9 }
mbgLtNgRefclockAdditionalInfo OBJECT-TYPE
SYNTAX INTEGER{
notAvailable(0),
leapSecondAnnounced(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"any kind of additional information concerning a refclock"
DEFVAL { 0 }
::= { mbgLtNgRefclockTableEntry 10 }
mbgLtNgRefclockLeapSecondDate OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Date for next leap second"
DEFVAL { "n/a" }
::= { mbgLtNgRefclockTableEntry 11 }
--- GPS refclock only information start
mbgLtNgRefclockGpsTable OBJECT-TYPE
SYNTAX SEQUENCE OF MbgLtNgRefclockGpsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"a table of gps only related variables"
::= { mbgLtNgRefclock 3 }
mbgLtNgRefclockGpsTableEntry OBJECT-TYPE
SYNTAX MbgLtNgRefclockGpsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"a list of objects pertaining to a GPS refclock"
INDEX { mbgLtNgRefclockGpsIndex }
::= { mbgLtNgRefclockGpsTable 1 }
MbgLtNgRefclockGpsTableEntry ::=
SEQUENCE {
mbgLtNgRefclockGpsIndex Unsigned32,
mbgLtNgRefclockGpsLatitude DisplayString,
mbgLtNgRefclockGpsLongitude DisplayString,
mbgLtNgRefclockGpsAltitude Integer32,
mbgLtNgRefclockGpsTdop DisplayString,
mbgLtNgRefclockGpsPdop DisplayString,
mbgLtNgRefclockGpsUtcOffset Integer32
}
mbgLtNgRefclockGpsIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"index for GPS"
::= { mbgLtNgRefclockGpsTableEntry 1 }
mbgLtNgRefclockGpsLatitude OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"GPS' latitude"
DEFVAL { "n/a" }
::= { mbgLtNgRefclockGpsTableEntry 2 }
mbgLtNgRefclockGpsLongitude OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"GPS' longitude"
DEFVAL { "n/a" }
::= { mbgLtNgRefclockGpsTableEntry 3 }
mbgLtNgRefclockGpsAltitude OBJECT-TYPE
SYNTAX Integer32
UNITS "m"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"GPS' altitude"
DEFVAL { -1 }
::= { mbgLtNgRefclockGpsTableEntry 4 }
mbgLtNgRefclockGpsTdop OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"GPS' timing dillution of precision"
DEFVAL { "n/a" }
::= { mbgLtNgRefclockGpsTableEntry 5 }
mbgLtNgRefclockGpsPdop OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"GPS' positional dillution of precision"
DEFVAL { "n/a" }
::= { mbgLtNgRefclockGpsTableEntry 6 }
mbgLtNgRefclockGpsUtcOffset OBJECT-TYPE
SYNTAX Integer32
UNITS "sec"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"GPS' offset to UTC in seconds"
DEFVAL { -1 }
::= { mbgLtNgRefclockGpsTableEntry 7 }
mbgLtNgRefclockTimeDiff OBJECT-TYPE
SYNTAX Integer32
UNITS "ms"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"when there is more than one refclock
this object shows the internal time
difference in milliseconds"
DEFVAL { 0 }
::= { mbgLtNgRefclock 4 }
mbgLtNgRefclockGpsPos OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"shows current GPS receiver position"
DEFVAL { "n/a" }
::= { mbgLtNgRefclock 5 }
--- GPS end
--- Refclock information table end
--
-- Lantime NTP states
--
mbgLtNgNtp OBJECT IDENTIFIER ::= { mbgLantimeNGStatus 2 }
mbgLtNgNtpCurrentState OBJECT-TYPE
SYNTAX INTEGER {
notAvailable(0),
notSynchronized(1),
synchronized(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current NTP's synchronization status"
DEFVAL { 0 }
::= { mbgLtNgNtp 1 }
mbgLtNgNtpStratum OBJECT-TYPE
SYNTAX Integer32 (0..16)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Stratum value of the NTP"
DEFVAL { 0 }
::= { mbgLtNgNtp 2 }
mbgLtNgNtpRefclockName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Name of the current refclock selected by the NTP"
DEFVAL { "n/a" }
::= { mbgLtNgNtp 3 }
mbgLtNgNtpRefclockOffset OBJECT-TYPE
SYNTAX DisplayString
UNITS "ms"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time offset between the current selected refclock and time of NTP as string in milliseconds"
DEFVAL { "n/a" }
::= { mbgLtNgNtp 4 }
mbgLtNgNtpVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"integrated NTP version"
DEFVAL { "n/a" }
::= { mbgLtNgNtp 5 }
--- ntp client counter
mbgLtNgNtpClientCounter OBJECT IDENTIFIER ::= { mbgLtNgNtp 8 }
mbgLtNgNtpCCStartedAt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"start time of current NTP client counter session as timestamp"
DEFVAL { 0 }
::= { mbgLtNgNtpClientCounter 1 }
mbgLtNgNtpCCDuration OBJECT-TYPE
SYNTAX Unsigned32
UNITS "sec"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"total duration of NTP client counter in seconds"
DEFVAL { 0 }
::= { mbgLtNgNtpClientCounter 2 }
mbgLtNgNtpCCNumberOfClients OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"total number of different clients requesting time"
DEFVAL { 0 }
::= { mbgLtNgNtpClientCounter 3 }
mbgLtNgNtpCCTotalRequests OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"total requests since starting the daemon"
DEFVAL { 0 }
::= { mbgLtNgNtpClientCounter 4 }
mbgLtNgNtpCCTotalRequestsCurrentDay OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"today's total requests"
DEFVAL { 0 }
::= { mbgLtNgNtpClientCounter 5 }
mbgLtNgNtpCCTotalRequestsLastHour OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"today's requests within the last completed hour"
DEFVAL { 0 }
::= { mbgLtNgNtpClientCounter 6 }
mbgLtNgNtpCCTotalRequestsLastMinute OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"today's requests within the last completed minute"
DEFVAL { 0 }
::= { mbgLtNgNtpClientCounter 7 }
mbgLtNgNtpCCTodaysClients OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"today's number of different clients requesting time"
DEFVAL { 0 }
::= { mbgLtNgNtpClientCounter 8 }
mbgLtNgNtpMrs OBJECT IDENTIFIER ::= { mbgLtNgNtp 9 }
mbgLtNgNtpMrsServer OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"external NTP server being used for synchronization"
DEFVAL { "n/a" }
::= { mbgLtNgNtpMrs 1 }
mbgLtNgNtpMrsOffset OBJECT-TYPE
SYNTAX DisplayString
UNITS "sec"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"external NTP server's offset"
DEFVAL { "n/a" }
::= { mbgLtNgNtpMrs 2 }
--
-- Lantime PTP status
--
mbgLtNgPtp OBJECT IDENTIFIER ::= { mbgLantimeNGStatus 3 }
mbgLtNgPtpNumberOfModules OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"number of available PTPv2 modules"
DEFVAL { 0 }
::= { mbgLtNgPtp 1 }
mbgLtNgPtpTable OBJECT-TYPE
SYNTAX SEQUENCE OF MbgLtNgPtpTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"a table of PTPv2 related variables"
::= { mbgLtNgPtp 2 }
mbgLtNgPtpTableEntry OBJECT-TYPE
SYNTAX MbgLtNgPtpTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"a list of objects pertaining to a PTPv2 module"
INDEX { mbgLtNgPtpIndex }
::= { mbgLtNgPtpTable 1 }
MbgLtNgPtpTableEntry ::=
SEQUENCE {
mbgLtNgPtpIndex Unsigned32,
mbgLtNgPtpMode INTEGER,
mbgLtNgPtpPortState INTEGER,
mbgLtNgPtpGrandmasterMac DisplayString,
mbgLtNgPtpClockAccuracy INTEGER,
mbgLtNgPtpClockClass Unsigned32,
mbgLtNgPtpTimeSource INTEGER,
mbgLtNgPtpUtcOffset Unsigned32,
mbgLtNgPtpTimeSeconds Counter64,
mbgLtNgPtpTsuTime DisplayString,
mbgLtNgPtpSysTime DisplayString,
mbgLtNgPtpPortLinkup MeinbergSwitch,
mbgLtNgPtpOffsetFromGM DisplayString,
mbgLtNgPtpPathDelay DisplayString,
mbgLtNgPtpDelayMec INTEGER,
mbgLtNgPtpDomain Unsigned32,
mbgLtNgPtpGrandmasterUuid DisplayString,
mbgLtNgPtpLocalMac DisplayString,
mbgLtNgPtpDelayAsymmetry DisplayString,
mbgLtNgPtpAvail INTEGER
}
mbgLtNgPtpIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"index for PTPv2 module"
::= { mbgLtNgPtpTableEntry 1 }
mbgLtNgPtpMode OBJECT-TYPE
SYNTAX INTEGER {
notAvailable(0),
stopped (1),
master (2),
slave (3),
ordinary (4)
}
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"PTPv2 modus as integer. This object is obsolete and
always returns '0'. Please see alternates
mbgLtNgPtpPortState and mbgLtNgPtpRole."
DEFVAL { 0 }
::= { mbgLtNgPtpTableEntry 2 }
mbgLtNgPtpPortState OBJECT-TYPE
SYNTAX INTEGER {
uninitialized (0),
initializing (1),
faulty (2),
disabled (3),
listening (4),
preMaster (5),
master (6),
passive (7),
uncalibrated (8),
slave (9)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"port state as integer"
DEFVAL { 3 }
::= { mbgLtNgPtpTableEntry 3 }
mbgLtNgPtpGrandmasterMac OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MAC address of current grandmaster"
DEFVAL { "n/a" }
::= { mbgLtNgPtpTableEntry 4 }
mbgLtNgPtpClockAccuracy OBJECT-TYPE
SYNTAX INTEGER {
notAvailable(0),
timeAccurateTo25ns(32),
timeAccurateTo100ns(33),
timeAccurateTo250ns(34),
timeAccurateTo1us(35),
timeAccurateTo2Point5us(36),
timeAccurateTo10us(37),
timeAccurateTo25us(38),
timeAccurateTo100us(39),
timeAccurateTo250us(40),
timeAccurateTo1ms(41),
timeAccurateTo2to5ms(42),
timeAccurateTo10ms(43),
timeAccurateTo25ms(44),
timeAccurateTo100ms(45),
timeAccurateTo250ms(46),
timeAccurateTo1s(47),
timeAccurateTo10s(48),
timeAccurateToGT10s(49),
timeAccurateToUnknown(254)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"indicates the source of time"
REFERENCE "IEEE Std. 1588-2008"
DEFVAL { 0 }
::= { mbgLtNgPtpTableEntry 5 }
mbgLtNgPtpClockClass OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"denotes the traceability of the time or frequency"
REFERENCE "IEEE Std. 1588-2008"
DEFVAL { 0 }
::= { mbgLtNgPtpTableEntry 6 }
mbgLtNgPtpTimeSource OBJECT-TYPE
SYNTAX INTEGER {
notAvailable(0),
atomicClock(16),
gps(32),
terrestrialRadio(48),
ptp(64),
ntp(80),
handSet(96),
other(144),
internalOscillator(160)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"source of time being used"
REFERENCE "IEEE Std. 1588-2008"
DEFVAL { 0 }
::= { mbgLtNgPtpTableEntry 7 }
mbgLtNgPtpUtcOffset OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"offset from PTP's TAI time to UTC time"
REFERENCE "IEEE Std. 1588-2008"
DEFVAL { 35 }
::= { mbgLtNgPtpTableEntry 8 }
mbgLtNgPtpTimeSeconds OBJECT-TYPE
SYNTAX Counter64
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"PTP seconds"
DEFVAL { 0 }
::= { mbgLtNgPtpTableEntry 9 }
mbgLtNgPtpTsuTime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"current time on PTP TSU"
DEFVAL { "n/a" }
::= { mbgLtNgPtpTableEntry 10 }
mbgLtNgPtpSysTime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"current system time"
DEFVAL { "n/a" }
::= { mbgLtNgPtpTableEntry 11 }
mbgLtNgPtpPortLinkup OBJECT-TYPE
SYNTAX MeinbergSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"PTP port's physical link-up"
DEFVAL { 0 }
::= { mbgLtNgPtpTableEntry 12 }
mbgLtNgPtpOffsetFromGM OBJECT-TYPE
SYNTAX DisplayString
UNITS "ns"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"offset from grandmaster in nanoseconds"
DEFVAL { "n/a" }
::= { mbgLtNgPtpTableEntry 13 }
mbgLtNgPtpPathDelay OBJECT-TYPE
SYNTAX DisplayString
UNITS "ns"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"network delay in nanoseconds"
DEFVAL { "n/a" }
::= { mbgLtNgPtpTableEntry 14 }
mbgLtNgPtpDelayMec OBJECT-TYPE
SYNTAX INTEGER {
end2End(0),
peer2Peer(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"delay mechanism"
REFERENCE "IEEE Std. 1588-2008"
DEFVAL { 0 }
::= { mbgLtNgPtpTableEntry 15 }
mbgLtNgPtpDomain OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"domain number"
REFERENCE "IEEE Std. 1588-2008"
DEFVAL { 0 }
::= { mbgLtNgPtpTableEntry 16 }
mbgLtNgPtpGrandmasterUuid OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"grandmaster uuid"
DEFVAL { "n/a" }
::= { mbgLtNgPtpTableEntry 17 }
mbgLtNgPtpLocalMac OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"local MAC address"
DEFVAL { "n/a" }
::= { mbgLtNgPtpTableEntry 18 }
mbgLtNgPtpDelayAsymmetry OBJECT-TYPE
SYNTAX DisplayString
UNITS "ns"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"asymmetric network delay in nanoseconds"
DEFVAL { "n/a" }
::= { mbgLtNgPtpTableEntry 19 }
mbgLtNgPtpAvail OBJECT-TYPE
SYNTAX INTEGER {
no(0),
yes(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Signals whether PTP instance is avail or not"
DEFVAL { 0 }
::= { mbgLtNgPtpTableEntry 20 }
--
-- FDM Powerline Frequency Deviation Monitor Module
--
mbgLtNgFdm OBJECT IDENTIFIER ::= { mbgLantimeNGStatus 4 }
mbgLtNgFdmFreq OBJECT-TYPE
SYNTAX Unsigned32 (0|45000..65000)
UNITS "mHz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"powerline frequency in mHz; 0 indicates that no data is available"
DEFVAL { 0 }
::= { mbgLtNgFdm 1 }
mbgLtNgFdmFreqDev OBJECT-TYPE
SYNTAX Integer32 (-15000..15000)
UNITS "mHz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"frequency deviation in mHz depending on the configured nominal frequency; check 'mbgLtNgFdmFreq' for error"
DEFVAL { 0 }
::= { mbgLtNgFdm 2 }
mbgLtNgFdmNomFreq OBJECT-TYPE
SYNTAX Unsigned32 (0|50000|60000)
UNITS "mHz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"nominal frequency in mHz; can be 50000 (50Hz) or 60000 (60Hz); 0 indicates that no value is configured"
DEFVAL { 0 }
::= { mbgLtNgFdm 3 }
--
-- System hardware ( fan, power supply, ... )
--
mbgLtNgSystemHardware OBJECT IDENTIFIER ::= { mbgLantimeNGStatus 5 }
-- power supplies
mbgLtNgSysPowerSupply OBJECT IDENTIFIER ::= { mbgLtNgSystemHardware 0 }
mbgLtNgSysNumberOfPowerSupplies OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"number of available power supplies"
DEFVAL { 1 }
::= { mbgLtNgSysPowerSupply 1 }
mbgLtNgSysPsTable OBJECT-TYPE
SYNTAX SEQUENCE OF MbgLtNgSysPsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"a table of power supply stati"
::= { mbgLtNgSysPowerSupply 2 }
mbgLtNgSysPsTableEntry OBJECT-TYPE
SYNTAX MbgLtNgSysPsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"a list of objects pertaining to power supplies"
INDEX { mbgLtNgSysPsIndex }
::= { mbgLtNgSysPsTable 1 }
MbgLtNgSysPsTableEntry ::=
SEQUENCE {
mbgLtNgSysPsIndex Unsigned32,
mbgLtNgSysPsStatus INTEGER
}
mbgLtNgSysPsIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"index of power supply"
::= { mbgLtNgSysPsTableEntry 1 }
mbgLtNgSysPsStatus OBJECT-TYPE
SYNTAX INTEGER {
notAvailable(0),
down(1),
up(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status of power supply"
DEFVAL { 0 }
::= { mbgLtNgSysPsTableEntry 2 }
-- fans
mbgLtNgSysFan OBJECT IDENTIFIER ::= { mbgLtNgSystemHardware 1 }
mbgLtNgSysNumberOfFans OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"number of available fans"
DEFVAL { 0 }
::= { mbgLtNgSysFan 1 }
mbgLtNgSysFanTable OBJECT-TYPE
SYNTAX SEQUENCE OF MbgLtNgSysFanTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"a table of power supply stati"
::= { mbgLtNgSysFan 2 }
mbgLtNgSysFanTableEntry OBJECT-TYPE
SYNTAX MbgLtNgSysFanTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"a list of objects pertaining to fans"
INDEX { mbgLtNgSysFanIndex }
::= { mbgLtNgSysFanTable 1 }
MbgLtNgSysFanTableEntry ::=
SEQUENCE {
mbgLtNgSysFanIndex Unsigned32,
mbgLtNgSysFanStatus INTEGER,
mbgLtNgSysFanError INTEGER
}
mbgLtNgSysFanIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"index of fan"
::= { mbgLtNgSysFanTableEntry 1 }
mbgLtNgSysFanStatus OBJECT-TYPE
SYNTAX INTEGER {
notAvailable(0),
off(1),
on(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status of fan"
DEFVAL { 0 }
::= { mbgLtNgSysFanTableEntry 2 }
mbgLtNgSysFanError OBJECT-TYPE
SYNTAX INTEGER {
notAvailable(0),
no(1),
yes(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"fan's error field"
DEFVAL { 0 }
::= { mbgLtNgSysFanTableEntry 3 }
-- temperature
mbgLtNgSysTemperature OBJECT IDENTIFIER ::= { mbgLtNgSystemHardware 2 }
mbgLtNgSysTempCelsius OBJECT-TYPE
SYNTAX Unsigned32
UNITS "C"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"temperature in degree Celsius"
DEFVAL { 0 }
::= { mbgLtNgSysTemperature 1 }
--
-- Cluster status information
--
mbgLtNgCluster OBJECT IDENTIFIER ::= { mbgLantimeNGStatus 6 }
mbgLtNgNumberOfClusters OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"number of active running clusters"
DEFVAL { 0 }
::= { mbgLtNgCluster 1 }
mbgLtNgClusterTable OBJECT-TYPE
SYNTAX SEQUENCE OF MbgLtNgClusterTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"a table of cluster status information"
::= { mbgLtNgCluster 2 }
mbgLtNgClusterTableEntry OBJECT-TYPE
SYNTAX MbgLtNgClusterTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"a list of objects pertaining to running and active clusters"
INDEX { mbgLtNgClusterIndex }
::= { mbgLtNgClusterTable 1 }
MbgLtNgClusterTableEntry ::=
SEQUENCE {
mbgLtNgClusterIndex Unsigned32,
mbgLtNgClusterCommunicationIp DisplayString,
mbgLtNgClusterPortState INTEGER,
mbgLtNgClusterMasterSerial DisplayString,
mbgLtNgClusterMasterIp DisplayString,
mbgLtNgClusterMasterPriority Unsigned32,
mbgLtNgClusterClockClass INTEGER,
mbgLtNgClusterClockStatus INTEGER,
mbgLtNgClusterReconfigurationState INTEGER,
mbgLtNgClusterIsFalseticker INTEGER
}
mbgLtNgClusterIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"index of power supply"
::= { mbgLtNgClusterTableEntry 1 }
mbgLtNgClusterCommunicationIp OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ip of cluster interface"
DEFVAL { "n/a" }
::= { mbgLtNgClusterTableEntry 2 }
mbgLtNgClusterPortState OBJECT-TYPE
SYNTAX INTEGER{
notAvailable(0),
master(1),
slave(2),
listening(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"state of cluster"
DEFVAL { 0 }
::= { mbgLtNgClusterTableEntry 3 }
mbgLtNgClusterMasterSerial OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"serial number of cluster's master"
DEFVAL { "n/a" }
::= { mbgLtNgClusterTableEntry 4 }
mbgLtNgClusterMasterIp OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ip address of cluster's master"
DEFVAL { "n/a" }
::= { mbgLtNgClusterTableEntry 5 }
mbgLtNgClusterMasterPriority OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"priority of cluster master"
DEFVAL { 0 }
::= { mbgLtNgClusterTableEntry 6 }
mbgLtNgClusterClockClass OBJECT-TYPE
SYNTAX INTEGER{
notAvailable(0),
gps(3),
pzf(4),
am(5),
irig(6),
pps(7),
ptp(8),
ntp(9),
e1(10),
rdt(11)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"reference's clock class"
DEFVAL { 0 }
::= { mbgLtNgClusterTableEntry 7 }
mbgLtNgClusterClockStatus OBJECT-TYPE
SYNTAX INTEGER{
notAvailable(0),
normalOperation(1),
freeRunningOrTracking(2),
antennaFailure(3),
invalid(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"reference's clock status"
DEFVAL { 0 }
::= { mbgLtNgClusterTableEntry 8 }
mbgLtNgClusterReconfigurationState OBJECT-TYPE
SYNTAX INTEGER{
notAvailable(0),
normal(1),
masterToSlave(2),
slaveToMaster(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"current reconfiguration state"
DEFVAL { 0 }
::= { mbgLtNgClusterTableEntry 9 }
mbgLtNgClusterIsFalseticker OBJECT-TYPE
SYNTAX INTEGER{
notAvailable(0),
no(1),
yes(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"am I a falseticker?"
DEFVAL { 0 }
::= { mbgLtNgClusterTableEntry 10 }
--
-- Misc objects
--
mbgLtNgMisc OBJECT IDENTIFIER ::= { mbgLantimeNGStatus 7 }
mbgLtNgEthPortLinkTable OBJECT-TYPE
SYNTAX SEQUENCE OF MbgLtNgEthPortLinkTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"a table of physical ethernet interface port link states"
::= { mbgLtNgMisc 1 }
mbgLtNgEthPortLinkTableEntry OBJECT-TYPE
SYNTAX MbgLtNgEthPortLinkTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"port link states for each physical ethernet interface"
INDEX { mbgLtNgEthPortLinkIndex }
::= { mbgLtNgEthPortLinkTable 1 }
MbgLtNgEthPortLinkTableEntry ::=
SEQUENCE {
mbgLtNgEthPortLinkIndex Unsigned32,
mbgLtNgEthPortLinkState INTEGER
}
mbgLtNgEthPortLinkIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"interface index"
::= { mbgLtNgEthPortLinkTableEntry 1 }
mbgLtNgEthPortLinkState OBJECT-TYPE
SYNTAX INTEGER
{
down(0),
up(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"link state"
DEFVAL { 0 }
::= { mbgLtNgEthPortLinkTableEntry 2 }
--
-- Meinberg Lantime CFG MIB objects for agent module--
--
mbgLtNgConfig OBJECT IDENTIFIER ::= { mbgLantimeNG 1 }
--
-- Ethernet page
--
mbgLtNgCfgEthernet OBJECT IDENTIFIER ::= { mbgLtNgConfig 0 }
mbgLtNgCfgEthernetHostname OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"devices' hostname"
DEFVAL { "n/a" }
::= { mbgLtNgCfgEthernet 1 }
mbgLtNgCfgEthernetDomain OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"devices' domain membership"
DEFVAL { "n/a" }
::= { mbgLtNgCfgEthernet 2 }
mbgLtNgCfgEthernetNameserver1 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"first nameserver's ip address"
DEFVAL { "n/a" }
::= { mbgLtNgCfgEthernet 3 }
mbgLtNgCfgEthernetNameserver2 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"second nameserver's ip address"
DEFVAL { "n/a" }
::= { mbgLtNgCfgEthernet 4 }
mbgLtNgCfgEthernetIpv4Gateway OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"device's ethernet ipv4 gateway"
DEFVAL { "n/a" }
::= { mbgLtNgCfgEthernet 5 }
mbgLtNgCfgEthernetIpv6Gateway OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"device's ethernet ipv6 gateway"
DEFVAL { "n/a" }
::= { mbgLtNgCfgEthernet 6 }
--- start interface specific table oids
mbgLtNgCfgNumberOfPhysicalIf OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"number of virtual interfaces interfaces"
DEFVAL { 0 }
::= { mbgLtNgCfgEthernet 7 }
mbgLtNgCfgNumberOfVirtualIf OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"number of virtual interfaces interfaces"
DEFVAL { 0 }
::= { mbgLtNgCfgEthernet 8 }
-- physical interface table/configuration
mbgLtNgCfgPhysicalIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF MbgLtNgCfgPhysicalIfTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"a table of service stati for the ethernet interfaces"
::= { mbgLtNgCfgEthernet 9 }
mbgLtNgCfgPhysicalIfTableEntry OBJECT-TYPE
SYNTAX MbgLtNgCfgPhysicalIfTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"a list of objects pertaining to a mrs input reference"
INDEX { mbgLtNgCfgPhysicalIfIndex }
::= { mbgLtNgCfgPhysicalIfTable 1 }
MbgLtNgCfgPhysicalIfTableEntry ::=
SEQUENCE {
mbgLtNgCfgPhysicalIfIndex Unsigned32,
mbgLtNgCfgPhysicalIfMac DisplayString,
mbgLtNgCfgPhysicalIfNetLinkMode INTEGER,
mbgLtNgCfgPhysicalIfIndicateLink MeinbergSwitch,
mbgLtNgCfgPhysicalIfBondingGroup Unsigned32,
mbgLtNgCfgPhysicalIfIpv6Mode INTEGER
}
mbgLtNgCfgPhysicalIfIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"specifies the physical interface index"
::= { mbgLtNgCfgPhysicalIfTableEntry 1 }
mbgLtNgCfgPhysicalIfMac OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"interface's physical MAC address"
DEFVAL { "n/a" }
::= { mbgLtNgCfgPhysicalIfTableEntry 2 }
mbgLtNgCfgPhysicalIfNetLinkMode OBJECT-TYPE
SYNTAX INTEGER{
auto(0),
hd10Mbit(1),
fd10Mbit(2),
hd100Mbit(3),
fd100Mbit(4),
hd1000Mbit(5),
fd1000Mbit(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"interface's net link mode; hd = half-duplex; fd = full-duplex"
DEFVAL { 0 }
::= { mbgLtNgCfgPhysicalIfTableEntry 3 }
mbgLtNgCfgPhysicalIfIndicateLink OBJECT-TYPE
SYNTAX MeinbergSwitch
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"indicate link via front panel LED"
DEFVAL { 1 }
::= { mbgLtNgCfgPhysicalIfTableEntry 4 }
mbgLtNgCfgPhysicalIfBondingGroup OBJECT-TYPE
SYNTAX Unsigned32(0..5)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"assign interface to bonding group; '0' means not assigned"
DEFVAL { 0 }
::= { mbgLtNgCfgPhysicalIfTableEntry 5 }
mbgLtNgCfgPhysicalIfIpv6Mode OBJECT-TYPE
SYNTAX INTEGER{
deactivated(0),
activated(1),
activatedWithAutoconf(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"enable IPv6 mode"
DEFVAL { 0 }
::= { mbgLtNgCfgPhysicalIfTableEntry 6 }
-- virtual interface table/configuration
mbgLtNgCfgVirtualIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF MbgLtNgCfgVirtualIfTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"a table of service stati for the ethernet interfaces"
::= { mbgLtNgCfgEthernet 10 }
mbgLtNgCfgVirtualIfTableEntry OBJECT-TYPE
SYNTAX MbgLtNgCfgVirtualIfTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"a list of objects pertaining to a mrs input reference"
INDEX { mbgLtNgCfgVirtualIfIndex }
::= { mbgLtNgCfgVirtualIfTable 1 }
MbgLtNgCfgVirtualIfTableEntry ::=
SEQUENCE {
mbgLtNgCfgVirtualIfIndex Unsigned32,
mbgLtNgCfgVirtualIfIpv4Addr DisplayString,
mbgLtNgCfgVirtualIfIpv4Netmask DisplayString,
mbgLtNgCfgVirtualIfIpv4Dhcp MeinbergSwitch,
mbgLtNgCfgVirtualIfIpv4AddrFromDhcp DisplayString,
mbgLtNgCfgVirtualIfIpv4NetmaskFromDhcp DisplayString,
mbgLtNgCfgVirtualIfIpv4BroadcastFromDhcp DisplayString,
mbgLtNgCfgVirtualIfIpv4GatewayFromDhcp DisplayString,
mbgLtNgCfgVirtualIfIpv4DnsFromDhcp DisplayString,
mbgLtNgCfgVirtualIfIpv4DomainFromDhcp DisplayString,
mbgLtNgCfgVirtualIfIpv6Addr DisplayString,
mbgLtNgCfgVirtualIfIpv6Dhcp MeinbergSwitch,
mbgLtNgCfgVirtualIfIpv6RoutAdd DisplayString,
mbgLtNgCfgVirtualIfIpv6LinkLocal DisplayString,
mbgLtNgCfgVirtualIfAssigned Unsigned32,
mbgLtNgCfgVirtualIfMac DisplayString,
mbgLtNgCfgVirtualIfLabel DisplayString,
mbgLtNgCfgVirtualIfVlan MeinbergSwitch,
mbgLtNgCfgVirtualIfVlanTag Unsigned32,
mbgLtNgCfgVirtualIfVlanPrio Unsigned32,
mbgLtNgCfgVirtualIfCluster MeinbergSwitch,
mbgLtNgCfgVirtualIfClusterIpv4Addr DisplayString,
mbgLtNgCfgVirtualIfClusterIpv4Netmask DisplayString,
mbgLtNgCfgVirtualIfClusterPrio Unsigned32,
mbgLtNgCfgVirtualIfServiceNtp MeinbergSwitch,
mbgLtNgCfgVirtualIfServiceHttp MeinbergSwitch,
mbgLtNgCfgVirtualIfServiceHttps MeinbergSwitch,
mbgLtNgCfgVirtualIfServiceTelnet MeinbergSwitch,
mbgLtNgCfgVirtualIfServiceSsh MeinbergSwitch,
mbgLtNgCfgVirtualIfServiceSnmp MeinbergSwitch,
mbgLtNgCfgVirtualIfServiceFtp MeinbergSwitch,
mbgLtNgCfgVirtualIfServiceTime MeinbergSwitch,
mbgLtNgCfgVirtualIfServiceDaytime MeinbergSwitch,
mbgLtNgCfgVirtualIfServiceFpc MeinbergSwitch
}
mbgLtNgCfgVirtualIfIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"specifies the virtual interface index"
::= { mbgLtNgCfgVirtualIfTableEntry 1 }
mbgLtNgCfgVirtualIfIpv4Addr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"interfaces' ipv4 address"
DEFVAL { "n/a" }
::= { mbgLtNgCfgVirtualIfTableEntry 2 }
mbgLtNgCfgVirtualIfIpv4Netmask OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"interfaces' ipv4 netmask"
DEFVAL { "n/a" }
::= { mbgLtNgCfgVirtualIfTableEntry 3 }
mbgLtNgCfgVirtualIfIpv4Dhcp OBJECT-TYPE
SYNTAX MeinbergSwitch
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"interface uses ipv4 dhcp?"
DEFVAL { 0 }
::= { mbgLtNgCfgVirtualIfTableEntry 4 }
-- ipv4 dhcp related stuff
mbgLtNgCfgVirtualIfIpv4AddrFromDhcp OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"interfaces' ipv4 address received from dhcp"
DEFVAL { "n/a" }
::= { mbgLtNgCfgVirtualIfTableEntry 5 }
mbgLtNgCfgVirtualIfIpv4NetmaskFromDhcp OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"interfaces' ipv4 netmask received from dhcp"
DEFVAL { "n/a" }
::= { mbgLtNgCfgVirtualIfTableEntry 6 }
mbgLtNgCfgVirtualIfIpv4BroadcastFromDhcp OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"interfaces' ipv4 broadcast received from dhcp"
DEFVAL { "n/a" }
::= { mbgLtNgCfgVirtualIfTableEntry 7 }
mbgLtNgCfgVirtualIfIpv4GatewayFromDhcp OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"interfaces' ipv4 gateway received from dhcp"
DEFVAL { "n/a" }
::= { mbgLtNgCfgVirtualIfTableEntry 8 }
mbgLtNgCfgVirtualIfIpv4DnsFromDhcp OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"interfaces' ipv4 dns server received from dhcp"
DEFVAL { "n/a" }
::= { mbgLtNgCfgVirtualIfTableEntry 9 }
mbgLtNgCfgVirtualIfIpv4DomainFromDhcp OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"interfaces' ipv4 dns server received from dhcp"
DEFVAL { "n/a" }
::= { mbgLtNgCfgVirtualIfTableEntry 10 }
--- ipv6
mbgLtNgCfgVirtualIfIpv6Addr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"interfaces' ipv6 address"
DEFVAL { "n/a" }
::= { mbgLtNgCfgVirtualIfTableEntry 11 }
mbgLtNgCfgVirtualIfIpv6Dhcp OBJECT-TYPE
SYNTAX MeinbergSwitch
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"interfaces uses ipv6 dhcp"
DEFVAL { 0 }
::= { mbgLtNgCfgVirtualIfTableEntry 12 }
mbgLtNgCfgVirtualIfIpv6RoutAdd OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"interfaces' router advertisement ipv6 address"
DEFVAL { "n/a" }
::= { mbgLtNgCfgVirtualIfTableEntry 13 }
mbgLtNgCfgVirtualIfIpv6LinkLocal OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"interfaces' ipv6 link local address"
DEFVAL { "n/a" }
::= { mbgLtNgCfgVirtualIfTableEntry 14 }
--- misc stuff
mbgLtNgCfgVirtualIfAssigned OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"mapping to the physical interface this virtual one is assigned to"
DEFVAL { 0 }
::= { mbgLtNgCfgVirtualIfTableEntry 15 }
mbgLtNgCfgVirtualIfMac OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MAC-address of this virtual interface"
DEFVAL { "n/a" }
::= { mbgLtNgCfgVirtualIfTableEntry 16 }
mbgLtNgCfgVirtualIfLabel OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"user description for this label (like an alias)"
DEFVAL { "n/a" }
::= { mbgLtNgCfgVirtualIfTableEntry 17 }
--- vlan
mbgLtNgCfgVirtualIfVlan OBJECT-TYPE
SYNTAX MeinbergSwitch
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"is vlan enabled"
DEFVAL { 0 }
::= { mbgLtNgCfgVirtualIfTableEntry 18 }
mbgLtNgCfgVirtualIfVlanTag OBJECT-TYPE
SYNTAX Unsigned32(0..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"vlan tag"
DEFVAL { 0 }
::= { mbgLtNgCfgVirtualIfTableEntry 19 }
mbgLtNgCfgVirtualIfVlanPrio OBJECT-TYPE
SYNTAX Unsigned32(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"vlan priority"
DEFVAL { 0 }
::= { mbgLtNgCfgVirtualIfTableEntry 20 }
--- cluster
mbgLtNgCfgVirtualIfCluster OBJECT-TYPE
SYNTAX MeinbergSwitch
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"is cluster mode enabled"
DEFVAL { 0 }
::= { mbgLtNgCfgVirtualIfTableEntry 21 }
mbgLtNgCfgVirtualIfClusterIpv4Addr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ipv4 cluster address"
DEFVAL { "n/a" }
::= { mbgLtNgCfgVirtualIfTableEntry 22 }
mbgLtNgCfgVirtualIfClusterIpv4Netmask OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"cluster ipv4 netmask"
DEFVAL { "n/a" }
::= { mbgLtNgCfgVirtualIfTableEntry 23 }
mbgLtNgCfgVirtualIfClusterPrio OBJECT-TYPE
SYNTAX Unsigned32(0..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"cluster priority"
DEFVAL { 0 }
::= { mbgLtNgCfgVirtualIfTableEntry 24 }
--- service
mbgLtNgCfgVirtualIfServiceNtp OBJECT-TYPE
SYNTAX MeinbergSwitch
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"is ntp active on this interface"
DEFVAL { 0 }
::= { mbgLtNgCfgVirtualIfTableEntry 25 }
mbgLtNgCfgVirtualIfServiceHttp OBJECT-TYPE
SYNTAX MeinbergSwitch
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"is http active on this interface"
DEFVAL { 0 }
::= { mbgLtNgCfgVirtualIfTableEntry 26 }
mbgLtNgCfgVirtualIfServiceHttps OBJECT-TYPE
SYNTAX MeinbergSwitch
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"is https active on this interface"
DEFVAL { 0 }
::= { mbgLtNgCfgVirtualIfTableEntry 27 }
mbgLtNgCfgVirtualIfServiceTelnet OBJECT-TYPE
SYNTAX MeinbergSwitch
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"is telnet active on this interface"
DEFVAL { 0 }
::= { mbgLtNgCfgVirtualIfTableEntry 28 }
mbgLtNgCfgVirtualIfServiceSsh OBJECT-TYPE
SYNTAX MeinbergSwitch
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"is ssh active on this interface"
DEFVAL { 0 }
::= { mbgLtNgCfgVirtualIfTableEntry 29 }
mbgLtNgCfgVirtualIfServiceSnmp OBJECT-TYPE
SYNTAX MeinbergSwitch
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"is snmp active on this interface"
DEFVAL { 0 }
::= { mbgLtNgCfgVirtualIfTableEntry 30 }
mbgLtNgCfgVirtualIfServiceFtp OBJECT-TYPE
SYNTAX MeinbergSwitch
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"is ftp active on this interface"
DEFVAL { 0 }
::= { mbgLtNgCfgVirtualIfTableEntry 31 }
mbgLtNgCfgVirtualIfServiceTime OBJECT-TYPE
SYNTAX MeinbergSwitch
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"is time active on this interface"
DEFVAL { 0 }
::= { mbgLtNgCfgVirtualIfTableEntry 32 }
mbgLtNgCfgVirtualIfServiceDaytime OBJECT-TYPE
SYNTAX MeinbergSwitch
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"is daytime active on this interface"
DEFVAL { 0 }
::= { mbgLtNgCfgVirtualIfTableEntry 33 }
mbgLtNgCfgVirtualIfServiceFpc OBJECT-TYPE
SYNTAX MeinbergSwitch
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"is fpc active on this interface"
DEFVAL { 0 }
::= { mbgLtNgCfgVirtualIfTableEntry 34 }
--- table interfaces end
mbgLtNgCfgEthernetGenClusterPort OBJECT-TYPE
SYNTAX Unsigned32(0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"general cluster port"
::= { mbgLtNgCfgEthernet 11 }
mbgLtNgCfgEthernetGenClusterIp OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"general multicast cluster address"
::= { mbgLtNgCfgEthernet 12 }
--
-- Notification page
--
mbgLtNgCfgNotifications OBJECT IDENTIFIER ::= { mbgLtNgConfig 1 }
--- syslog
mbgLtNgCfgSyslog OBJECT IDENTIFIER ::= { mbgLtNgCfgNotifications 0 }
mbgLtNgCfgSyslogServerAddr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"comma separated string of all configured syslog servers;
use such a list to set syslog servers"
DEFVAL{ "n/a" }
::= { mbgLtNgCfgSyslog 1 }
mbgLtNgCfgSyslogLoglevel OBJECT-TYPE
SYNTAX INTEGER{
emergency(0),
alert(1),
critical(2),
error(3),
warning(4),
notice(5),
info(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"loglevel for syslog server"
DEFVAL{ 0 }
::= { mbgLtNgCfgSyslog 2 }
--- email
mbgLtNgCfgEmail OBJECT IDENTIFIER ::= { mbgLtNgCfgNotifications 1 }
mbgLtNgCfgEmailTo OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"email address to send alerts etc. to (receiving address)"
DEFVAL{ "n/a" }
::= { mbgLtNgCfgEmail 1 }
mbgLtNgCfgEmailFrom OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"email address to send alerts etc. from (sending address)"
DEFVAL{ "n/a" }
::= { mbgLtNgCfgEmail 2 }
mbgLtNgCfgEmailSmarthostAddr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SMTP smarthost used to send mail (ip or hostname)"
DEFVAL{ "n/a" }
::= { mbgLtNgCfgEmail 3 }
mbgLtNgCfgEmailSmarthostPort OBJECT-TYPE
SYNTAX Unsigned32(0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SMTP smarthost listenning port"
DEFVAL { 0 }
::= { mbgLtNgCfgEmail 4 }
mbgLtNgCfgEmailSmarthostAuth OBJECT-TYPE
SYNTAX MeinbergSwitch
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"use authentication for smarthost"
DEFVAL { 0 }
::= { mbgLtNgCfgEmail 5 }
mbgLtNgCfgEmailSmarthostAuthUser OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"user to authenticate at smarthost"
DEFVAL { "n/a" }
::= { mbgLtNgCfgEmail 6 }
mbgLtNgCfgEmailSmarthostAuthPw OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"password to authenticate user at smarthost"
DEFVAL { "n/a" }
::= { mbgLtNgCfgEmail 7 }
-- winpopup
mbgLtNgCfgWinpopup OBJECT IDENTIFIER ::= { mbgLtNgCfgNotifications 2 }
mbgLtNgCfgWmailAddress1 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"first windows popup alert receiver (ip or hostname)"
DEFVAL { "n/a" }
::= { mbgLtNgCfgWinpopup 1 }
mbgLtNgCfgWmailAddress2 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"second windows popup alert receiver (ip or hostname)"
DEFVAL { "n/a" }
::= { mbgLtNgCfgWinpopup 2 }
-- snmp
mbgLtNgCfgSNMP OBJECT IDENTIFIER ::= { mbgLtNgCfgNotifications 3 }
mbgLtNgCfgSnmpTrapRecTable OBJECT-TYPE
SYNTAX SEQUENCE OF MbgLtNgCfgSnmpTrapRecTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"a table of SNMP trap receiver information"
::= { mbgLtNgCfgSNMP 1 }
mbgLtNgCfgSnmpTrapRecTableEntry OBJECT-TYPE
SYNTAX MbgLtNgCfgSnmpTrapRecTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"a list of objects pertaining to an interface and concerning broad-, multi- and manycast"
INDEX { mbgLtNgCfgSnmpTrapRecIndex }
::= { mbgLtNgCfgSnmpTrapRecTable 1 }
MbgLtNgCfgSnmpTrapRecTableEntry ::=
SEQUENCE {
mbgLtNgCfgSnmpTrapRecIndex Unsigned32,
mbgLtNgCfgSnmpTrapRecAddr DisplayString,
mbgLtNgCfgSnmpTrapRecCommunity DisplayString,
mbgLtNgCfgSnmpTrapRecVersion INTEGER
}
mbgLtNgCfgSnmpTrapRecIndex OBJECT-TYPE
SYNTAX Unsigned32(0..4)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"index of different SNMP trap receivers"
::= { mbgLtNgCfgSnmpTrapRecTableEntry 1 }
mbgLtNgCfgSnmpTrapRecAddr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SNMP trap receiver address (ip or hostname)"
DEFVAL { "n/a" }
::= { mbgLtNgCfgSnmpTrapRecTableEntry 2 }
mbgLtNgCfgSnmpTrapRecCommunity OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SNMP trap receiver community"
DEFVAL { "n/a" }
::= { mbgLtNgCfgSnmpTrapRecTableEntry 3 }
mbgLtNgCfgSnmpTrapRecVersion OBJECT-TYPE
SYNTAX INTEGER{ v1(1), v2c(2), v3(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SNMP trap receiver version"
DEFVAL { 1 }
::= { mbgLtNgCfgSnmpTrapRecTableEntry 4 }
mbgLtNgCfgSnmpReadCommunity OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"read community for SNMPv1 and SNMPv2c"
DEFVAL { "****" }
::= { mbgLtNgCfgSNMP 2 }
mbgLtNgCfgSnmpWriteCommunity OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"read community for SNMPv1 and SNMPv2c"
DEFVAL { "****" }
::= { mbgLtNgCfgSNMP 3 }
mbgLtNgCfgSnmpContact OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SNMP contact string for Lantime"
DEFVAL { "n/a" }
::= { mbgLtNgCfgSNMP 4 }
mbgLtNgCfgSnmpLocation OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SNMP location string for Lantime"
DEFVAL { "n/a" }
::= { mbgLtNgCfgSNMP 5 }
mbgLtNgCfgSnmpV3UserName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"username for SNMPv3"
DEFVAL { "n/a" }
::= { mbgLtNgCfgSNMP 6 }
mbgLtNgCfgSnmpV3UserRights OBJECT-TYPE
SYNTAX INTEGER{
readonly(0),
readwrite(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"privacy protocol for SNMPv3"
DEFVAL { 0 }
::= { mbgLtNgCfgSNMP 7 }
mbgLtNgCfgSnmpV3Context OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"context string for SNMPv3"
DEFVAL { "n/a" }
::= { mbgLtNgCfgSNMP 8 }
mbgLtNgCfgSnmpV3SecurityLevel OBJECT-TYPE
SYNTAX INTEGER{
noAuthNoPriv(0),
authNoPriv(1),
authPriv(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"authentication level for SNMPv3"
DEFVAL { 0 }
::= { mbgLtNgCfgSNMP 9 }
mbgLtNgCfgSnmpV3AuthProtocol OBJECT-TYPE
SYNTAX INTEGER{
md5(0),
sha(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"authentication protocol for SNMPv3"
DEFVAL { 0 }
::= { mbgLtNgCfgSNMP 10 }
mbgLtNgCfgSnmpV3AuthPassphrase OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"authentication passphrase for SNMPv3"
DEFVAL { "****" }
::= { mbgLtNgCfgSNMP 11 }
mbgLtNgCfgSnmpV3PrivProtocol OBJECT-TYPE
SYNTAX INTEGER{
des(0),
aes(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"privacy protocol for SNMPv3"
DEFVAL { 0 }
::= { mbgLtNgCfgSNMP 12 }
mbgLtNgCfgSnmpV3PrivPassphrase OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"privacy passphrase for SNMPv3"
DEFVAL { "****" }
::= { mbgLtNgCfgSNMP 13 }
mbgLtNgCfgSnmpRetries OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"number of retries for sending traps"
DEFVAL { 3 }
::= { mbgLtNgCfgSNMP 14 }
mbgLtNgCfgSnmpTimeout OBJECT-TYPE
SYNTAX Unsigned32
UNITS "sec"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"timeout for sending traps (in seconds)"
DEFVAL { 3 }
::= { mbgLtNgCfgSNMP 15 }
mbgLtNgCfgSnmpEnabledVersion OBJECT-TYPE
SYNTAX INTEGER{
v1ANDv2c(0),
v3only(1),
v1ANDv2cANDv3(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"currently enabled SNMP version"
DEFVAL { 0 }
::= { mbgLtNgCfgSNMP 16 }
-- Wallmount display
mbgLtNgCfgWalldisplay OBJECT IDENTIFIER ::= { mbgLtNgCfgNotifications 4 }
mbgLtNgCfgVP100Display1Addr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"address of wall display (ip or hostname)"
DEFVAL { "n/a" }
::= { mbgLtNgCfgWalldisplay 1 }
mbgLtNgCfgVP100Display1SN OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"serial number of first VP100 wall display"
DEFVAL { "n/a" }
::= { mbgLtNgCfgWalldisplay 2 }
mbgLtNgCfgVP100Display2Addr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"address of wall display (ip or hostname)"
DEFVAL { "n/a" }
::= { mbgLtNgCfgWalldisplay 3 }
mbgLtNgCfgVP100Display2SN OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"serial number of second VP100 wall display"
DEFVAL { "n/a" }
::= { mbgLtNgCfgWalldisplay 4 }
-- ntp client monitoring
mbgLtNgCfgNtpClientMonitoring OBJECT IDENTIFIER ::= { mbgLtNgCfgNotifications 5 }
mbgLtNgCfgNtpMaxClientOffset OBJECT-TYPE
SYNTAX Unsigned32
UNITS "ms"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"max NTP client offset limit in milliseconds"
DEFVAL { 10 }
::= { mbgLtNgCfgNtpClientMonitoring 1 }
mbgLtNgCfgNtpMaxClientStratum OBJECT-TYPE
SYNTAX Unsigned32(1..16)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"max NTP client stratum level"
DEFVAL { 10 }
::= { mbgLtNgCfgNtpClientMonitoring 2 }
-- trap trigger
mbgLtNgCfgTrapTrigger OBJECT IDENTIFIER ::= { mbgLtNgCfgNotifications 6 }
mbgLtNgCfgTrapNormalOperation OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"string containing signaling information ( comma-separated ); use the following aliases to set params:
Email -> email
Wmail -> wmail
Snmp -> snmp
VP100 -> disp
User -> own
Alarm -> led
Relay -> relais
Following string is perfectly valid to enable signaling for SNMP and Email: 'snmp,email'.
Please note that some objects do not suppurt relay and led but this is announced at each MIB object itself.
This object, for example, does not support them."
DEFVAL { "n/a" }
::= { mbgLtNgCfgTrapTrigger 1 }
mbgLtNgCfgTrapNtpNotSync OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation"
DEFVAL { "n/a" }
::= { mbgLtNgCfgTrapTrigger 2 }
mbgLtNgCfgTrapNtpSync OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation"
DEFVAL { "n/a" }
::= { mbgLtNgCfgTrapTrigger 3 }
mbgLtNgCfgTrapNtpStopped OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation"
DEFVAL { "n/a" }
::= { mbgLtNgCfgTrapTrigger 4 }
mbgLtNgCfgTrapServerBoot OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation"
DEFVAL { "n/a" }
::= { mbgLtNgCfgTrapTrigger 5 }
mbgLtNgCfgTrapRefclockNotResponding OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation"
DEFVAL { "n/a" }
::= { mbgLtNgCfgTrapTrigger 6 }
mbgLtNgCfgTrapRefclockSynchronized OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation"
DEFVAL { "n/a" }
::= { mbgLtNgCfgTrapTrigger 7 }
mbgLtNgCfgTrapRefclockNotSynchronized OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation"
DEFVAL { "n/a" }
::= { mbgLtNgCfgTrapTrigger 8 }
mbgLtNgCfgTrapSecRefclockNotResponding OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation"
DEFVAL { "n/a" }
::= { mbgLtNgCfgTrapTrigger 9 }
mbgLtNgCfgTrapSecRefclockSynchronized OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation"
DEFVAL { "n/a" }
::= { mbgLtNgCfgTrapTrigger 10 }
mbgLtNgCfgTrapSecRefclockNotSynchronized OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation"
DEFVAL { "n/a" }
::= { mbgLtNgCfgTrapTrigger 11 }
mbgLtNgCfgTrapAntennaFaulty OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation"
DEFVAL { "n/a" }
::= { mbgLtNgCfgTrapTrigger 12 }
mbgLtNgCfgTrapAntennaReconnect OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation"
DEFVAL { "n/a" }
::= { mbgLtNgCfgTrapTrigger 13 }
mbgLtNgCfgTrapAntennaShortCircuit OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation"
DEFVAL { "n/a" }
::= { mbgLtNgCfgTrapTrigger 14 }
mbgLtNgCfgTrapConfigChanged OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation"
DEFVAL { "n/a" }
::= { mbgLtNgCfgTrapTrigger 15 }
mbgLtNgCfgTrapLeapSecAnnounced OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation"
DEFVAL { "n/a" }
::= { mbgLtNgCfgTrapTrigger 16 }
mbgLtNgCfgTrapNtpClientLimitExceeded OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation"
DEFVAL { "n/a" }
::= { mbgLtNgCfgTrapTrigger 17 }
mbgLtNgCfgTrapRefSrcLimitExceeded OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation"
DEFVAL { "n/a" }
::= { mbgLtNgCfgTrapTrigger 18 }
mbgLtNgCfgTrapRefSrcDisconnected OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation"
DEFVAL { "n/a" }
::= { mbgLtNgCfgTrapTrigger 19 }
mbgLtNgCfgTrapRefSrcReconnected OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation"
DEFVAL { "n/a" }
::= { mbgLtNgCfgTrapTrigger 20 }
mbgLtNgCfgTrapShsTimeLimitError OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation"
DEFVAL { "n/a" }
::= { mbgLtNgCfgTrapTrigger 21 }
mbgLtNgCfgTrapShsTimeLimitWarning OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation"
DEFVAL { "n/a" }
::= { mbgLtNgCfgTrapTrigger 22 }
mbgLtNgCfgTrapNetworkDown OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation"
DEFVAL { "n/a" }
::= { mbgLtNgCfgTrapTrigger 23 }
mbgLtNgCfgTrapNetworkUp OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation"
DEFVAL { "n/a" }
::= { mbgLtNgCfgTrapTrigger 24 }
mbgLtNgCfgTrapPowerSupplyUp OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation"
DEFVAL { "n/a" }
::= { mbgLtNgCfgTrapTrigger 25 }
mbgLtNgCfgTrapPowerSupplyDown OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation"
DEFVAL { "n/a" }
::= { mbgLtNgCfgTrapTrigger 26 }
mbgLtNgCfgTrapFdmError OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation"
DEFVAL { "n/a" }
::= { mbgLtNgCfgTrapTrigger 27 }
mbgLtNgCfgTrapLowSystemResources OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation"
DEFVAL { "n/a" }
::= { mbgLtNgCfgTrapTrigger 28 }
mbgLtNgCfgTrapPtpNetworkDown OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation"
DEFVAL { "n/a" }
::= { mbgLtNgCfgTrapTrigger 29 }
mbgLtNgCfgTrapPtpNetworkUp OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation"
DEFVAL { "n/a" }
::= { mbgLtNgCfgTrapTrigger 30 }
mbgLtNgCfgTrapPtpStateChanged OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation"
DEFVAL { "n/a" }
::= { mbgLtNgCfgTrapTrigger 31 }
mbgLtNgCfgTrapPtpError OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation"
DEFVAL { "n/a" }
::= { mbgLtNgCfgTrapTrigger 32 }
mbgLtNgCfgTrapFanDown OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation"
DEFVAL { "n/a" }
::= { mbgLtNgCfgTrapTrigger 33 }
mbgLtNgCfgTrapFanUp OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation"
DEFVAL { "n/a" }
::= { mbgLtNgCfgTrapTrigger 34 }
mbgLtNgCfgRepeatEvent OBJECT-TYPE
SYNTAX INTEGER{ never(0), everyMinute(1), everyHour(2), everyDay(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"when to send last error trap message again"
DEFVAL { 0 }
::= { mbgLtNgCfgTrapTrigger 35 }
mbgLtNgCfgRepetitions OBJECT-TYPE
SYNTAX Unsigned32(0..50)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"how often do you want to resend an error trap"
DEFVAL { 0 }
::= { mbgLtNgCfgTrapTrigger 36 }
mbgLtNgCfgTrapWarmedUp OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation"
DEFVAL { "n/a" }
::= { mbgLtNgCfgTrapTrigger 37 }
mbgLtNgCfgTrapNotWarmedUp OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation"
DEFVAL { "n/a" }
::= { mbgLtNgCfgTrapTrigger 38 }
--
-- security
--
mbgLtNgCfgSecurity OBJECT IDENTIFIER ::= { mbgLtNgConfig 2 }
-- login and access
mbgLtNgCfgLoginAccess OBJECT IDENTIFIER ::= { mbgLtNgCfgSecurity 0 }
mbgLtNgCfgDisableRootLogin OBJECT-TYPE
SYNTAX MeinbergSwitch
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"do not allow user 'root' to login"
DEFVAL { 0 }
::= { mbgLtNgCfgLoginAccess 1 }
mbgLtNgCfgAllowNetworkDiscovery OBJECT-TYPE
SYNTAX MeinbergSwitch
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"allow LANTIME to be discovered via network mdns"
DEFVAL { 0 }
::= { mbgLtNgCfgLoginAccess 2 }
-- front panel
mbgLtNgCfgFrontPanel OBJECT IDENTIFIER ::= { mbgLtNgCfgSecurity 1 }
mbgLtNgCfgLockFrontPanel OBJECT-TYPE
SYNTAX MeinbergSwitch
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"do not allow usage of the front panel"
DEFVAL { 0 }
::= { mbgLtNgCfgFrontPanel 1 }
mbgLtNgCfgDisableUsbPort OBJECT-TYPE
SYNTAX MeinbergSwitch
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"do not allow usage of front USB port"
DEFVAL { 0 }
::= { mbgLtNgCfgFrontPanel 2 }
-- ssh
mbgLtNgCfgSsh OBJECT IDENTIFIER ::= { mbgLtNgCfgSecurity 2 }
mbgLtNgCfgSshKeyLength OBJECT-TYPE
SYNTAX Unsigned32(768|1024|2048|4096|8192|16384|32768)
UNITS "bits"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ssh key length in bits"
DEFVAL { 1024 }
::= { mbgLtNgCfgSsh 1 }
mbgLtNgCfgSshShellTimeout OBJECT-TYPE
SYNTAX Unsigned32(0|60|120|300|600|3600|10800|18000|86400)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ssh shell timeout in seconds"
DEFVAL { 300 }
::= { mbgLtNgCfgSsh 2 }
--
-- NTP page
--
mbgLtNgCfgNtp OBJECT IDENTIFIER ::= { mbgLtNgConfig 3 }
-- Phil start
mbgLtNgCfgNtpTable OBJECT-TYPE
SYNTAX SEQUENCE OF MbgLtNgCfgNtpTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"a table of configured, external NTP servers"
::= { mbgLtNgCfgNtp 1 }
mbgLtNgCfgNtpTableEntry OBJECT-TYPE
SYNTAX MbgLtNgCfgNtpTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"a list of objects pertaining to a configured,external NTP server"
INDEX { mbgLtNgCfgNtpIndex }
::= { mbgLtNgCfgNtpTable 1 }
MbgLtNgCfgNtpTableEntry ::=
SEQUENCE {
mbgLtNgCfgNtpIndex Unsigned32,
mbgLtNgCfgNtpServerIP DisplayString,
mbgLtNgCfgNtpServerKey Unsigned32,
mbgLtNgCfgNtpServerAutokey MeinbergSwitch,
mbgLtNgCfgNtpServerMinpoll Unsigned32,
mbgLtNgCfgNtpServerMaxpoll Unsigned32,
mbgLtNgCfgNtpServerIburst MeinbergSwitch
}
mbgLtNgCfgNtpIndex OBJECT-TYPE
SYNTAX Unsigned32(1..7)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"index (and no.) of external NTP server"
::= { mbgLtNgCfgNtpTableEntry 1 }
mbgLtNgCfgNtpServerIP OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ip address for external NTP server"
DEFVAL { "n/a" }
::= { mbgLtNgCfgNtpTableEntry 2 }
mbgLtNgCfgNtpServerKey OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"key for external NTP server"
::= { mbgLtNgCfgNtpTableEntry 3 }
mbgLtNgCfgNtpServerAutokey OBJECT-TYPE
SYNTAX MeinbergSwitch
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"is autokey enabled for the external NTP server"
DEFVAL { 0 }
::= { mbgLtNgCfgNtpTableEntry 4 }
mbgLtNgCfgNtpServerMinpoll OBJECT-TYPE
SYNTAX Unsigned32(4..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"is autokey enabled for the external NTP server"
DEFVAL { 6 }
::= { mbgLtNgCfgNtpTableEntry 5 }
mbgLtNgCfgNtpServerMaxpoll OBJECT-TYPE
SYNTAX Unsigned32(4..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"is autokey enabled for the external NTP server"
DEFVAL { 6 }
::= { mbgLtNgCfgNtpTableEntry 6 }
mbgLtNgCfgNtpServerIburst OBJECT-TYPE
SYNTAX MeinbergSwitch
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"is autokey enabled for the external NTP server"
DEFVAL { 0 }
::= { mbgLtNgCfgNtpTableEntry 7 }
--- broad- and manycast mode
mbgLtNgCfgNtpBMTable OBJECT-TYPE
SYNTAX SEQUENCE OF MbgLtNgCfgNtpBMTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"a table of configured, external NTP servers"
::= { mbgLtNgCfgNtp 2 }
mbgLtNgCfgNtpBMTableEntry OBJECT-TYPE
SYNTAX MbgLtNgCfgNtpBMTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"a list of objects pertaining to an interface and concerning broad-, multi- and manycast"
INDEX { mbgLtNgCfgNtpBMIndex }
::= { mbgLtNgCfgNtpBMTable 1 }
MbgLtNgCfgNtpBMTableEntry ::=
SEQUENCE {
mbgLtNgCfgNtpBMIndex Unsigned32,
mbgLtNgCfgNtpBroadAddr DisplayString,
mbgLtNgCfgNtpBroadSymKey Unsigned32,
mbgLtNgCfgNtpBroadInterval Unsigned32,
mbgLtNgCfgNtpBroadUseAutokey MeinbergSwitch
}
mbgLtNgCfgNtpBMIndex OBJECT-TYPE
SYNTAX Unsigned32(0..16)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"index of interface concerning different NTP modes"
::= { mbgLtNgCfgNtpBMTableEntry 1 }
--- broadcast
mbgLtNgCfgNtpBroadAddr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"address for NTP broadcast mode"
DEFVAL { "n/a" }
::= { mbgLtNgCfgNtpBMTableEntry 2 }
mbgLtNgCfgNtpBroadSymKey OBJECT-TYPE
SYNTAX Unsigned32(0..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"symmetric key number for broadcast"
DEFVAL { 0 }
::= { mbgLtNgCfgNtpBMTableEntry 3 }
mbgLtNgCfgNtpBroadInterval OBJECT-TYPE
SYNTAX Unsigned32(0..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"NTP broadcast interval on specific interval"
DEFVAL { 0 }
::= { mbgLtNgCfgNtpBMTableEntry 4 }
mbgLtNgCfgNtpBroadUseAutokey OBJECT-TYPE
SYNTAX MeinbergSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"use autokey for broadcast"
DEFVAL { 0 }
::= { mbgLtNgCfgNtpBMTableEntry 5 }
---multicast
mbgLtNgCfgNtpEnableMulticast OBJECT-TYPE
SYNTAX MeinbergSwitch
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"enable or disable multicast mode"
DEFVAL { 0 }
::= { mbgLtNgCfgNtp 3 }
mbgLtNgCfgNtpMultiAddr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"address for NTP multicast mode"
DEFVAL { "n/a" }
::= { mbgLtNgCfgNtp 4 }
mbgLtNgCfgNtpMultiInterval OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"NTP multicast interval on specific interval"
DEFVAL { 0 }
::= { mbgLtNgCfgNtp 5 }
mbgLtNgCfgNtpMultiSymKey OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"symmetric key number for multicast"
DEFVAL { 0 }
::= { mbgLtNgCfgNtp 6 }
mbgLtNgCfgNtpMultiUseAutokey OBJECT-TYPE
SYNTAX MeinbergSwitch
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"use autokey for multicast"
DEFVAL { 0 }
::= { mbgLtNgCfgNtp 7 }
-- manycast
mbgLtNgCfgNtpEnableManycast OBJECT-TYPE
SYNTAX MeinbergSwitch
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"enable or disable manycast mode for this interface"
DEFVAL { 0 }
::= { mbgLtNgCfgNtp 8 }
mbgLtNgCfgNtpManyAddr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"address for NTP manycast mode"
DEFVAL { "n/a" }
::= { mbgLtNgCfgNtp 9 }
mbgLtNgCfgNtpManySymKey OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"symmetric key number for manycast"
DEFVAL { 0 }
::= { mbgLtNgCfgNtp 11 }
mbgLtNgCfgNtpManyUseAutokey OBJECT-TYPE
SYNTAX MeinbergSwitch
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"use autokey for manycast"
DEFVAL { 0 }
::= { mbgLtNgCfgNtp 12 }
-- general
mbgLtNgCfgNtpLocalClkStratum OBJECT-TYPE
SYNTAX Unsigned32(1..16)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"stratum of local clock"
DEFVAL { 12 }
::= { mbgLtNgCfgNtp 13 }
mbgLtNgCfgNtpDisableLocalClk OBJECT-TYPE
SYNTAX MeinbergSwitch
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"disable local clock"
DEFVAL { 0 }
::= { mbgLtNgCfgNtp 14 }
mbgLtNgCfgNtpSpoofLocalTime OBJECT-TYPE
SYNTAX MeinbergSwitch
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"NTP outputs local time instead of UTC; see mbgLtNgCfgNtpTimeScale"
DEFVAL { 0 }
::= { mbgLtNgCfgNtp 15 }
mbgLtNgCfgNtpLocalTrustedKeys OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"local trusted key"
DEFVAL { "n/a" }
::= { mbgLtNgCfgNtp 16 }
mbgLtNgCfgNtpTrusttime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"accept async reference clock for this amount of time in seconds"
DEFVAL { 0 }
::= { mbgLtNgCfgNtp 17 }
mbgLtNgCfgNtpTimeScale OBJECT-TYPE
SYNTAX INTEGER
{
utc(0),
local(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"timescale"
DEFVAL { 0 }
::= { mbgLtNgCfgNtp 18 }
mbgLtNgCfgNtpEnableClientCounter OBJECT-TYPE
SYNTAX MeinbergSwitch
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"enable NTP request client counting"
DEFVAL { 0 }
::= { mbgLtNgCfgNtp 19 }
mbgLtNgCfgNtpEnableClientCounterDuration OBJECT-TYPE
SYNTAX Integer32(0..2147483647)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"NTP client counter duration in seconds; 0 means continuously"
DEFVAL { 0 }
::= { mbgLtNgCfgNtp 20 }
--
-- PTP page
--
mbgLtNgCfgPtp OBJECT IDENTIFIER ::= { mbgLtNgConfig 4 }
mbgLtNgCfgPtpTable OBJECT-TYPE
SYNTAX SEQUENCE OF MbgLtNgCfgPtpTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"a table of PTPv2 related configurtion variables"
::= { mbgLtNgCfgPtp 1 }
mbgLtNgCfgPtpTableEntry OBJECT-TYPE
SYNTAX MbgLtNgCfgPtpTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"a list of configuration objects pertaining to a PTPv2 module"
INDEX { mbgLtNgCfgPtpIndex }
::= { mbgLtNgCfgPtpTable 1 }
MbgLtNgCfgPtpTableEntry ::=
SEQUENCE {
mbgLtNgCfgPtpIndex Unsigned32,
mbgLtNgCfgPtpHostname DisplayString,
mbgLtNgCfgPtpDomainname DisplayString,
mbgLtNgCfgPtpNameserver1 DisplayString,
mbgLtNgCfgPtpNameserver2 DisplayString,
mbgLtNgCfgPtpIpv4 DisplayString,
mbgLtNgCfgPtpNetmask DisplayString,
mbgLtNgCfgPtpGateway DisplayString,
mbgLtNgCfgPtpEnableVlan MeinbergSwitch,
mbgLtNgCfgPtpVlanId Unsigned32,
mbgLtNgCfgPtpVlanPriority Unsigned32,
mbgLtNgCfgPtpEnableDhcp MeinbergSwitch,
mbgLtNgCfgPtpMode INTEGER,
mbgLtNgCfgPtpDelayMechanism INTEGER,
mbgLtNgCfgPtpNetworkProtocol INTEGER,
mbgLtNgCfgPtpDomainNumber Unsigned32,
mbgLtNgCfgPtpPriority1 Unsigned32,
mbgLtNgCfgPtpPriority2 Unsigned32,
mbgLtNgCfgPtpSyncInterval Integer32,
mbgLtNgCfgPtpAnnounceInterval Integer32,
mbgLtNgCfgPtpDelayReqInterval Integer32,
mbgLtNgCfgPtpTimescale INTEGER,
mbgLtNgCfgPtpIpv6Avail INTEGER,
mbgLtNgCfgPtpIpv6Mode INTEGER,
mbgLtNgCfgPtpIpv6Address DisplayString,
mbgLtNgCfgPtpIpv6McastScope INTEGER,
mbgLtNgCfgPtpDisableSsh INTEGER,
mbgLtNgCfgPtpDscpClass Unsigned32,
mbgLtNgCfgPtpMcastTtl Unsigned32,
mbgLtNgCfgPtpOpMode INTEGER,
mbgLtNgCfgPtpProfile INTEGER,
mbgLtNgCfgPtpHybridMode MeinbergSwitch,
mbgLtNgCfgPtpUcastMstAddr DisplayString,
mbgLtNgCfgPtpAnnRcptTmout Unsigned32,
mbgLtNgCfgPtpMessageDuration Unsigned32,
mbgLtNgCfgPtpSyncEAvail INTEGER,
mbgLtNgCfgPtpSyncEEnabled INTEGER,
mbgLtNgCfgPtpSyncEQltLvlSelEnable INTEGER,
mbgLtNgCfgPtpSyncESdhNwOption INTEGER,
mbgLtNgCfgPtpSyncEInputSsm INTEGER,
mbgLtNgCfgPtpSyncEOutputSsm INTEGER,
mbgLtNgCfgPtpSyncEGbitCopperMode INTEGER,
mbgLtNgCfgPtpMiscEnable1Step INTEGER,
mbgLtNgCfgPtpDisableMgmtMsgs INTEGER,
mbgLtNgCfgPtpOutput1 INTEGER,
mbgLtNgCfgPtpOutput2 INTEGER
}
mbgLtNgCfgPtpIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"index for PTPv2 module"
::= { mbgLtNgCfgPtpTableEntry 1 }
-- network section
mbgLtNgCfgPtpHostname OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"network hostname"
DEFVAL { "n/a" }
::= { mbgLtNgCfgPtpTableEntry 2 }
mbgLtNgCfgPtpDomainname OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"network domain"
DEFVAL { "n/a" }
::= { mbgLtNgCfgPtpTableEntry 3 }
mbgLtNgCfgPtpNameserver1 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ethernet nameserver for hostname resolving"
DEFVAL { "n/a" }
::= { mbgLtNgCfgPtpTableEntry 4 }
mbgLtNgCfgPtpNameserver2 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ethernet nameserver for hostname resolving"
DEFVAL { "n/a" }
::= { mbgLtNgCfgPtpTableEntry 5 }
mbgLtNgCfgPtpIpv4 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ip address"
DEFVAL { "n/a" }
::= { mbgLtNgCfgPtpTableEntry 6 }
mbgLtNgCfgPtpNetmask OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"netmask"
DEFVAL { "n/a" }
::= { mbgLtNgCfgPtpTableEntry 7 }
mbgLtNgCfgPtpGateway OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default gateway"
DEFVAL { "n/a" }
::= { mbgLtNgCfgPtpTableEntry 8 }
mbgLtNgCfgPtpEnableVlan OBJECT-TYPE
SYNTAX MeinbergSwitch
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable VLAN if it is supported"
DEFVAL { 0 }
::= { mbgLtNgCfgPtpTableEntry 9 }
mbgLtNgCfgPtpVlanId OBJECT-TYPE
SYNTAX Unsigned32(0..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"VLAN id ranges from 0-4096"
DEFVAL { 0 }
::= { mbgLtNgCfgPtpTableEntry 10 }
mbgLtNgCfgPtpVlanPriority OBJECT-TYPE
SYNTAX Unsigned32(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"VLAN priority ranges from 0-7"
DEFVAL { 0 }
::= { mbgLtNgCfgPtpTableEntry 11 }
mbgLtNgCfgPtpEnableDhcp OBJECT-TYPE
SYNTAX MeinbergSwitch
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable DCHP for PTPv2 module"
DEFVAL { 0 }
::= { mbgLtNgCfgPtpTableEntry 12 }
mbgLtNgCfgPtpIpv6Avail OBJECT-TYPE
SYNTAX INTEGER{
no(0),
yes(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Is IPv6 supported?"
DEFVAL { 0 }
::= { mbgLtNgCfgPtpTableEntry 23 }
mbgLtNgCfgPtpIpv6Mode OBJECT-TYPE
SYNTAX INTEGER{
static(0),
ra(1),
dhcp(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IPv6 addressing mode"
DEFVAL { 0 }
::= { mbgLtNgCfgPtpTableEntry 24 }
mbgLtNgCfgPtpIpv6Address OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IPv6 address if supported, else n/a"
DEFVAL { "n/a" }
::= { mbgLtNgCfgPtpTableEntry 25 }
mbgLtNgCfgPtpIpv6McastScope OBJECT-TYPE
SYNTAX INTEGER{
intfLocal(1),
linkLocal(2),
realmLocal(3),
adminLocal(4),
siteLocal(5),
orgaLocal(8),
globalScope(14)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Multicast scope. See RFC 7346 and RFC 4291"
DEFVAL { 1 }
::= { mbgLtNgCfgPtpTableEntry 26 }
mbgLtNgCfgPtpDisableSsh OBJECT-TYPE
SYNTAX MeinbergSwitch
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Disable SSH for PTP port"
DEFVAL { 0 }
::= { mbgLtNgCfgPtpTableEntry 27 }
mbgLtNgCfgPtpDscpClass OBJECT-TYPE
SYNTAX Unsigned32(0..64)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DSCP classification value ranges from 0-64"
DEFVAL { 0 }
::= { mbgLtNgCfgPtpTableEntry 28 }
mbgLtNgCfgPtpMcastTtl OBJECT-TYPE
SYNTAX Unsigned32(0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Multicast TTL value ranges from 0-255"
DEFVAL { 5 }
::= { mbgLtNgCfgPtpTableEntry 29 }
-- global section
mbgLtNgCfgPtpMode OBJECT-TYPE
SYNTAX INTEGER {
multicastSlave(0),
unicastSlave(1),
multicastMaster(2),
unicastMaster(3),
multicastAuto(4),
bothMaster(5),
ntpServer(6),
ntpClient(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"PTP mode"
DEFVAL { 0 }
::= { mbgLtNgCfgPtpTableEntry 13 }
mbgLtNgCfgPtpDelayMechanism OBJECT-TYPE
SYNTAX INTEGER{
e2e(0),
p2p(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"how to calculate delay mechanism"
DEFVAL { 0 }
::= { mbgLtNgCfgPtpTableEntry 14 }
mbgLtNgCfgPtpNetworkProtocol OBJECT-TYPE
SYNTAX INTEGER{
reserved(0),
udpIpv4(1),
udpIpv6(2),
ieee8023(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"how to calculate delay mechanism"
DEFVAL { 0 }
::= { mbgLtNgCfgPtpTableEntry 15 }
mbgLtNgCfgPtpDomainNumber OBJECT-TYPE
SYNTAX Unsigned32(0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ptp domain membership"
DEFVAL { 0 }
::= { mbgLtNgCfgPtpTableEntry 16 }
mbgLtNgCfgPtpPriority1 OBJECT-TYPE
SYNTAX Unsigned32(0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ptp user defined major priority"
DEFVAL { 0 }
::= { mbgLtNgCfgPtpTableEntry 17 }
mbgLtNgCfgPtpPriority2 OBJECT-TYPE
SYNTAX Unsigned32(0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ptp user defined minor priority"
DEFVAL { 0 }
::= { mbgLtNgCfgPtpTableEntry 18 }
mbgLtNgCfgPtpSyncInterval OBJECT-TYPE
SYNTAX Integer32(-7..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"value is defined as power of 2;
for example:
2 = one message every 4 seconds,
-2 = 4 messages every second"
DEFVAL { 0 }
::= { mbgLtNgCfgPtpTableEntry 19 }
mbgLtNgCfgPtpAnnounceInterval OBJECT-TYPE
SYNTAX Integer32(-7..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"see 'mbgLtNgCfPtpSyncInterval' for explanation"
DEFVAL { 0 }
::= { mbgLtNgCfgPtpTableEntry 20 }
mbgLtNgCfgPtpDelayReqInterval OBJECT-TYPE
SYNTAX Integer32(-7..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"see 'mbgLtNgCfPtpSyncInterval' for explanation"
DEFVAL { 0 }
::= { mbgLtNgCfgPtpTableEntry 21 }
mbgLtNgCfgPtpTimescale OBJECT-TYPE
SYNTAX INTEGER{
arbitrary(0),
ptp(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"see 'mbgLtNgCfPtpSyncInterval' for explanation"
DEFVAL { 1 }
::= { mbgLtNgCfgPtpTableEntry 22 }
mbgLtNgCfgPtpOpMode OBJECT-TYPE
SYNTAX INTEGER {
ptp(0),
ntp(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"General PTP operation mode"
DEFVAL { 0 }
::= { mbgLtNgCfgPtpTableEntry 30 }
mbgLtNgCfgPtpProfile OBJECT-TYPE
SYNTAX INTEGER {
custom(0),
defE2eIeee15882008(1),
defP2pIeee15882008(2),
powIeeeC37238(3),
telItuTG82651(4),
telItuTG82751(5),
smpteSt20592(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"PTP profile"
DEFVAL { 0 }
::= { mbgLtNgCfgPtpTableEntry 31 }
mbgLtNgCfgPtpHybridMode OBJECT-TYPE
SYNTAX MeinbergSwitch
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Run card in hybrid mode"
DEFVAL { 0 }
::= { mbgLtNgCfgPtpTableEntry 32 }
mbgLtNgCfgPtpUcastMstAddr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IP address of unicast master
when in slave mode. Only 1!!!
is shown and can be set."
DEFVAL { "n/a" }
::= { mbgLtNgCfgPtpTableEntry 33 }
mbgLtNgCfgPtpAnnRcptTmout OBJECT-TYPE
SYNTAX Unsigned32(2..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Timeout for announce messages"
DEFVAL { 3 }
::= { mbgLtNgCfgPtpTableEntry 34 }
mbgLtNgCfgPtpMessageDuration OBJECT-TYPE
SYNTAX Unsigned32(10..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Time period until master stops
sending messages [s]"
DEFVAL { 60 }
::= { mbgLtNgCfgPtpTableEntry 35 }
--- Sync E section
mbgLtNgCfgPtpSyncEAvail OBJECT-TYPE
SYNTAX MeinbergSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Is SyncE supported?"
DEFVAL { 0 }
::= { mbgLtNgCfgPtpTableEntry 36 }
mbgLtNgCfgPtpSyncEEnabled OBJECT-TYPE
SYNTAX MeinbergSwitch
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Is Sync-E enabled if supported?"
DEFVAL { 0 }
::= { mbgLtNgCfgPtpTableEntry 37 }
mbgLtNgCfgPtpSyncEQltLvlSelEnable OBJECT-TYPE
SYNTAX MeinbergSwitch
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable quality selection?"
DEFVAL { 0 }
::= { mbgLtNgCfgPtpTableEntry 38 }
mbgLtNgCfgPtpSyncESdhNwOption OBJECT-TYPE
SYNTAX INTEGER {
opt1(0),
opt2(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sdh network option"
DEFVAL { 0 }
::= { mbgLtNgCfgPtpTableEntry 39 }
mbgLtNgCfgPtpSyncEInputSsm OBJECT-TYPE
SYNTAX INTEGER {
stuUkn(0),
prs(1),
prc(2),
inv3(3),
ssuATnc(4),
inv5(5),
inv6(6),
st2(7),
ssuB(8),
inv9(9),
eec2St3(10),
eec1Sec(11),
smc(12),
st3e(13),
prov(14),
dnuDus(15)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Input SSMs combied for both options.
You should be aware of using which code when."
DEFVAL { 0 }
::= { mbgLtNgCfgPtpTableEntry 40 }
mbgLtNgCfgPtpSyncEOutputSsm OBJECT-TYPE
SYNTAX INTEGER {
stuUkn(0),
prs(1),
prc(2),
inv3(3),
ssuATnc(4),
inv5(5),
inv6(6),
st2(7),
ssuB(8),
inv9(9),
eec2St3(10),
eec1Sec(11),
smc(12),
st3e(13),
prov(14),
dnuDus(15)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Input SSMs combined for both options.
You should be aware of using which code when."
DEFVAL { 0 }
::= { mbgLtNgCfgPtpTableEntry 41 }
mbgLtNgCfgPtpSyncEGbitCopperMode OBJECT-TYPE
SYNTAX INTEGER {
auto(0),
forceSyncEAuto(1),
forceOrIsMaster(2),
forceOrIsSlave(3),
preferMaster(4),
preferSlave(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Gigabit copper modes"
DEFVAL { 0 }
::= { mbgLtNgCfgPtpTableEntry 42 }
--- Misc
mbgLtNgCfgPtpMiscEnable1Step OBJECT-TYPE
SYNTAX MeinbergSwitch
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable PTP 1 step if supported"
DEFVAL { 0 }
::= { mbgLtNgCfgPtpTableEntry 43 }
mbgLtNgCfgPtpDisableMgmtMsgs OBJECT-TYPE
SYNTAX MeinbergSwitch
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Disable management messages if suppported"
DEFVAL { 0 }
::= { mbgLtNgCfgPtpTableEntry 44 }
--- Outputs
mbgLtNgCfgPtpOutput1 OBJECT-TYPE
SYNTAX INTEGER {
off(0),
pps(1),
mhz10(2),
khzGPS2048(3),
mhzGPS10(4),
ppsGPS(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Additional I/O output if suppported"
DEFVAL { 0 }
::= { mbgLtNgCfgPtpTableEntry 45 }
mbgLtNgCfgPtpOutput2 OBJECT-TYPE
SYNTAX INTEGER {
off(0),
pps(1),
mhz10(2),
khzGPS2048(3),
mhzGPS10(4),
ppsGPS(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Additional I/O output if suppported"
DEFVAL { 0 }
::= { mbgLtNgCfgPtpTableEntry 46 }
mbgLtNgCfgPtpCmd OBJECT-TYPE
SYNTAX INTEGER{
none(0),
configure(1),
reset(2),
apply(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configuration commands"
DEFVAL { 0 }
::= { mbgLtNgCfgPtp 2 }
--
-- System page
--
mbgLtNgCfgSystem OBJECT IDENTIFIER ::= { mbgLtNgConfig 5 }
-- general
mbgLtNgCfgGeneral OBJECT IDENTIFIER ::= { mbgLtNgCfgSystem 0 }
mbgLtNgCfgWebLanguage OBJECT-TYPE
SYNTAX INTEGER{ notAvailable(0), englisch(1), german(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"set language for web interface"
DEFVAL { 0 }
::= { mbgLtNgCfgGeneral 1 }
mbgLtNgCfgActivateChangesAsStartup OBJECT-TYPE
SYNTAX MeinbergSwitch
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"activate changes automatically as startup configuration"
DEFVAL { 1 }
::= { mbgLtNgCfgGeneral 2 }
-- front display
mbgLtNgCfgDisplay OBJECT IDENTIFIER ::= { mbgLtNgCfgSystem 1 }
mbgLtNgCfgEnableFrontPanelLight OBJECT-TYPE
SYNTAX MeinbergSwitch
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"active light at front panel"
DEFVAL { 0 }
::= { mbgLtNgCfgDisplay 1 }
--
-- Lantime system modus
--
-- mbgLtNgCfgReceiver OBJECT IDENTIFIER ::= { mbgLtNgConfig 8 }
-- MRS settings etc....
--
-- Lantime SNMP commands
--
mbgLtNgCommands OBJECT IDENTIFIER ::= { mbgLantimeNG 2 }
mbgLtNgCmdExecute OBJECT-TYPE
SYNTAX INTEGER {
none(0),
applyChanges(1),
saveChanges(2),
saveAndApplyChanges(3),
startFirmwareUpdate(4),
reboot(5),
resendErrorConditions(6),
sendTestNotifications(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Send a command to the timeserver to be executed;
Attention: Command should be executed with a timeout of 120 seconds and 0 retries"
DEFVAL { 0 }
::={ mbgLtNgCommands 1 }
mbgLtNgCmdSetTime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Reference time can be set via a date-time string in format:
yyyy-mm-dd hh:mm:ss
Time is interpreted as configured via web interface at menu:
'Receiver'->'Time Zone'
It is mandatory to unplug the receiver's antenna to make this work.
and strongly advised to execute a SNMPSET WITHOUT retries
and a timeout value greater than 60 seconds. Otherwise
there might come up unforeseen issues.
SNMPGET always returns default value."
DEFVAL { "n/a" }
::={ mbgLtNgCommands 2 }
--
-- Lantime SNMP trap definitions
--
mbgLtNgTrapNotifications OBJECT IDENTIFIER ::= { mbgLantimeNG 3 }
mbgLtNgTraps OBJECT IDENTIFIER ::= { mbgLtNgTrapNotifications 0 }
mbgLtNgTrapNTPNotSync NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"trap to be sent when NTP is not synchronised "
::= { mbgLtNgTraps 1 }
mbgLtNgTrapNTPStopped NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"trap to be sent when NTP is stopped "
::= { mbgLtNgTraps 2 }
mbgLtNgTrapServerBoot NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"trap to be sent when time server has finished boot sequence "
::= { mbgLtNgTraps 3 }
mbgLtNgTrapReceiverNotResponding NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"trap to be sent when receiver is not responding "
::= { mbgLtNgTraps 4 }
mbgLtNgTrapReceiverNotSync NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"trap to be sent when receiver is not synchronised "
::= { mbgLtNgTraps 5 }
mbgLtNgTrapAntennaFaulty NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"trap to be sent when connection to antenna is broken "
::= { mbgLtNgTraps 6 }
mbgLtNgTrapAntennaReconnect NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"trap to be sent when antenna has been reconnected "
::= { mbgLtNgTraps 7 }
mbgLtNgTrapConfigChanged NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"trap to be sent when timeserver reloaded its configuration "
::= { mbgLtNgTraps 8 }
mbgLtNgTrapLeapSecondAnnounced NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"trap to be sent when a leap second has been announced "
::= { mbgLtNgTraps 9 }
mbgLtNgTrapSHSTimeLimitError NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"trap to be sent when SHS timelimit exceeded "
::= { mbgLtNgTraps 10 }
mbgLtNgTrapSecondaryRecNotSync NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"trap to be sent when secondary receiver in SHS system is not synchronised "
::= { mbgLtNgTraps 11 }
mbgLtNgTrapPowerSupplyFailure NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"trap to be sent when one of the redundant power supplies fails"
::= { mbgLtNgTraps 12 }
mbgLtNgTrapAntennaShortCircuit NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"trap to be sent when a connected antenna fails due to a short circuit"
::= { mbgLtNgTraps 13 }
mbgLtNgTrapReceiverSync NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"trap to be sent when receiver is synchronised "
::= { mbgLtNgTraps 14 }
mbgLtNgTrapNTPClientAlarm NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"trap to be sent when an NTP Client Monitoring alarm occurs, e.g. when a monitored client is not reachable. "
::= { mbgLtNgTraps 15 }
mbgLtNgTrapPowerSupplyUp NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"trap to be sent when a power supply returned to a healthy state. "
::= { mbgLtNgTraps 16 }
mbgLtNgTrapNetworkDown NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"trap to be sent when a monitored network port is down. "
::= { mbgLtNgTraps 17 }
mbgLtNgTrapNetworkUp NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"trap to be sent when a monitored network port is up. "
::= { mbgLtNgTraps 18 }
mbgLtNgTrapSecondaryRecNotResp NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"trap to be sent when secondary receiver is not responding "
::= { mbgLtNgTraps 19 }
mbgLtNgTrapXmrLimitExceeded NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"trap to be sent when a reference offset exceeds the configured limit"
::= { mbgLtNgTraps 30 }
mbgLtNgTrapXmrRefDisconnect NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"trap to be sent when a reference signal has been lost"
::= { mbgLtNgTraps 31 }
mbgLtNgTrapXmrRefReconnect NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"trap to be sent when a reference signal recovered"
::= { mbgLtNgTraps 32 }
mbgLtNgTrapFdmError NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"trap to be sent when the Fdm module generates an alarm "
::= { mbgLtNgTraps 33 }
mbgLtNgTrapSHSTimeLimitWarning NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"trap to be sent when SHS warning limit exceeded "
::= { mbgLtNgTraps 34 }
mbgLtNgTrapSecondaryRecSync NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"trap to be sent when secondary receiver is synchronised "
::= { mbgLtNgTraps 35 }
mbgLtNgTrapNTPSync NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"trap to be sent when NTP is synchronised "
::= { mbgLtNgTraps 36 }
mbgLtNgTrapPtpPortDisconnected NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"trap to be sent when PTP network port got disconnected"
::= { mbgLtNgTraps 37 }
mbgLtNgTrapPtpPortConnected NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"trap to be sent when PTP network port got connected"
::= { mbgLtNgTraps 38 }
mbgLtNgTrapPtpStateChanged NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"trap to be sent when PTP state changed (e.g. from 'passive' to 'master')"
::= { mbgLtNgTraps 39 }
mbgLtNgTrapPtpError NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"trap to be sent when PTP raised an error"
::= { mbgLtNgTraps 40 }
mbgLtNgTrapLowSystemResources NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"trap to be sent when system is running on low resources"
::= { mbgLtNgTraps 41 }
mbgLtNgTrapFanDown NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"trap to be sent when fan goes down"
::= { mbgLtNgTraps 45 }
mbgLtNgTrapFanUp NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"trap to be sent when fan comes up"
::= { mbgLtNgTraps 46 }
mbgLtNgTrapCertificateExpired NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"trap to be sent when certificate expired or will expire"
::= { mbgLtNgTraps 47 }
mbgLtNgTrapSufficientSystemResources NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"trap to be sent when system has regained sufficient resources"
::= { mbgLtNgTraps 48 }
mbgLtNgTrapOscillatorWarmedUp NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"trap to be sent when oscillator is not warmed up"
::= { mbgLtNgTraps 49 }
mbgLtNgTrapOscillatorNotWarmedUp NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"trap to be sent when oscillator is warmed up"
::= { mbgLtNgTraps 50 }
mbgLtNgTrapXmrRefChanged NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"trap to be sent when XMR reference source changed"
::= { mbgLtNgTraps 51 }
mbgLtNgTrapClusterMasterChanged NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"trap to be sent when cluster mode is active and cluster changed"
::= { mbgLtNgTraps 52 }
mbgLtNgTrapClusterFalsetickerDetected NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"trap to be sent when cluster mode is active and
a cluster member is dectected as falseticker"
::= { mbgLtNgTraps 53 }
mbgLtNgTrapClusterFalsetickerCleared NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"trap to be sent when cluster mode is active and
a cluster member is no longer a falseticker"
::= { mbgLtNgTraps 54 }
mbgLtNgTrapSHSTimeLimitOk NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"trap to be sent when SHS timelimit error has
been acknowledged or time difference drops
below warning limit."
::= { mbgLtNgTraps 55 }
mbgLtNgTrapIMSError NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"trap to be sent when an IMS module is not
responsive anymore, has got temperature issues,
etc. ..."
::= { mbgLtNgTraps 56 }
mbgLtNgTrapIMSOk NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"trap to be sent when an IMS module returns
to healthy state."
::= { mbgLtNgTraps 57 }
mbgLtNgTrapFDMOk NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"trap to be sent when an FDM module returns
to healthy state."
::= { mbgLtNgTraps 58 }
mbgLtNgTrapNTPOffsetLimitExceeded NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"trap to be sent when monitoring an NTP client and its
offset limit is exceeded"
::= { mbgLtNgTraps 59 }
mbgLtNgTrapNTPOffsetLimitOk NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"trap to be sent when monitoring an NTP client and its
offset limit is back again in a valid range"
::= { mbgLtNgTraps 60 }
mbgLtNgTrapNormalOperation NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"trap to be sent when the system returned to a healthy state "
::= { mbgLtNgTraps 77 }
mbgLtNgTrapHeartbeat NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"trap to be sent periodically to indicate that time server is still alive "
::= { mbgLtNgTraps 88 }
mbgLtNgTrapTestNotification NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"trap to be sent when a test notification has been requested "
::= { mbgLtNgTraps 99 }
mbgLtNgTrapMessage OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"used as a payload object for all traps, holds a clear text event message"
DEFVAL { "no event" }
::= { mbgLtNgTraps 100 }
-- conformance and other stuff
mbgLtNgConformance OBJECT IDENTIFIER ::= { mbgLantimeNG 90 }
mbgLtNgCompliances OBJECT IDENTIFIER ::= { mbgLtNgConformance 1 }
mbgLtNgGroups OBJECT IDENTIFIER ::= { mbgLtNgConformance 2 }
mbgLtNgCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for SNMP entities which implement version 2
of the LANTIME MIB"
MODULE -- this module
MANDATORY-GROUPS {
mbgLtNgObjectsGroup,
mbgLtNgTrapsGroup
}
::= { mbgLtNgCompliances 1 }
mbgLtNgObjectsGroup OBJECT-GROUP
OBJECTS {
mbgLtNgSnmpSubagentVersion,
mbgLtNgFirmwareVersion,
mbgLtNgSerialNumber,
mbgLtNgSubagentTimeticks,
mbgLtNgCpuSerialNumber,
mbgLtNgNtpCurrentState,
mbgLtNgNtpStratum,
mbgLtNgNtpRefclockName,
mbgLtNgNtpRefclockOffset,
mbgLtNgNtpVersion,
mbgLtNgNtpCCStartedAt,
mbgLtNgNtpCCDuration,
mbgLtNgNtpCCNumberOfClients,
mbgLtNgNtpCCTotalRequests,
mbgLtNgNtpCCTotalRequestsLastHour,
mbgLtNgNtpCCTotalRequestsLastMinute,
mbgLtNgNtpCCTotalRequestsCurrentDay,
mbgLtNgNtpCCTodaysClients,
mbgLtNgNtpMrsServer,
mbgLtNgNtpMrsOffset,
mbgLtNgNumberOfRefclocks,
mbgLtNgRefclockType,
mbgLtNgRefclockUsage,
mbgLtNgRefclockState,
mbgLtNgRefclockSubstate,
mbgLtNgRefclockStatusA,
mbgLtNgRefclockMaxStatusA,
mbgLtNgRefclockStatusB,
mbgLtNgRefclockMaxStatusB,
mbgLtNgRefclockAdditionalInfo,
mbgLtNgRefclockLeapSecondDate,
mbgLtNgRefclockGpsLatitude,
mbgLtNgRefclockGpsLongitude,
mbgLtNgRefclockGpsTdop,
mbgLtNgRefclockGpsPdop,
mbgLtNgRefclockGpsUtcOffset,
mbgLtNgRefclockGpsAltitude,
mbgLtNgRefclockTimeDiff,
mbgLtNgRefclockGpsPos,
mbgLtNgTrapMessage,
mbgLtNgNumberOfClusters,
mbgLtNgClusterCommunicationIp,
mbgLtNgClusterPortState,
mbgLtNgClusterMasterSerial,
mbgLtNgClusterMasterIp,
mbgLtNgClusterMasterPriority,
mbgLtNgClusterClockStatus,
mbgLtNgClusterClockClass,
mbgLtNgClusterReconfigurationState,
mbgLtNgClusterIsFalseticker,
mbgLtNgCfgNtpServerIP,
mbgLtNgCfgNtpServerKey,
mbgLtNgCfgNtpServerAutokey,
mbgLtNgCfgNtpServerMinpoll,
mbgLtNgCfgNtpServerMaxpoll,
mbgLtNgCfgNtpServerIburst,
mbgLtNgCfgNtpBroadAddr,
mbgLtNgCfgNtpBroadInterval,
mbgLtNgCfgNtpBroadSymKey,
mbgLtNgCfgNtpBroadUseAutokey,
mbgLtNgCfgNtpEnableMulticast,
mbgLtNgCfgNtpMultiAddr,
mbgLtNgCfgNtpMultiInterval,
mbgLtNgCfgNtpMultiSymKey,
mbgLtNgCfgNtpMultiUseAutokey,
mbgLtNgCfgNtpEnableManycast,
mbgLtNgCfgNtpManyAddr,
mbgLtNgCfgNtpManySymKey,
mbgLtNgCfgNtpManyUseAutokey,
mbgLtNgCfgNtpLocalTrustedKeys,
mbgLtNgCfgNtpTrusttime,
mbgLtNgCfgNtpTimeScale,
mbgLtNgCfgNtpLocalClkStratum,
mbgLtNgCfgNtpDisableLocalClk,
mbgLtNgCfgNtpSpoofLocalTime,
mbgLtNgCfgNtpEnableClientCounter,
mbgLtNgCfgNtpEnableClientCounterDuration,
mbgLtNgCfgPtpHostname,
mbgLtNgCfgPtpDomainname,
mbgLtNgCfgPtpNameserver1,
mbgLtNgCfgPtpNameserver2,
mbgLtNgCfgPtpIpv4,
mbgLtNgCfgPtpNetmask,
mbgLtNgCfgPtpGateway,
mbgLtNgCfgPtpEnableVlan,
mbgLtNgCfgPtpVlanId,
mbgLtNgCfgPtpVlanPriority,
mbgLtNgCfgPtpEnableDhcp,
mbgLtNgCfgPtpIpv6Avail,
mbgLtNgCfgPtpIpv6Mode,
mbgLtNgCfgPtpIpv6Address,
mbgLtNgCfgPtpIpv6McastScope,
mbgLtNgCfgPtpDisableSsh,
mbgLtNgCfgPtpDscpClass,
mbgLtNgCfgPtpMcastTtl,
mbgLtNgCfgPtpOpMode,
mbgLtNgCfgPtpMode,
mbgLtNgCfgPtpHybridMode,
mbgLtNgCfgPtpUcastMstAddr,
mbgLtNgCfgPtpProfile,
mbgLtNgCfgPtpDelayMechanism,
mbgLtNgCfgPtpNetworkProtocol,
mbgLtNgCfgPtpDomainNumber,
mbgLtNgCfgPtpPriority1,
mbgLtNgCfgPtpPriority2,
mbgLtNgCfgPtpSyncInterval,
mbgLtNgCfgPtpAnnounceInterval,
mbgLtNgCfgPtpDelayReqInterval,
mbgLtNgCfgPtpTimescale,
mbgLtNgCfgPtpAnnRcptTmout,
mbgLtNgCfgPtpMessageDuration,
mbgLtNgCfgPtpCmd,
mbgLtNgCfgPtpSyncEAvail,
mbgLtNgCfgPtpSyncEEnabled,
mbgLtNgCfgPtpSyncEQltLvlSelEnable,
mbgLtNgCfgPtpSyncESdhNwOption,
mbgLtNgCfgPtpSyncEInputSsm,
mbgLtNgCfgPtpSyncEOutputSsm,
mbgLtNgCfgPtpSyncEGbitCopperMode,
mbgLtNgCfgPtpMiscEnable1Step,
mbgLtNgCfgPtpDisableMgmtMsgs,
mbgLtNgCfgPtpOutput1,
mbgLtNgCfgPtpOutput2,
mbgLtNgCfgEmailTo,
mbgLtNgEthPortLinkState,
mbgLtNgCfgEmailFrom,
mbgLtNgCfgEmailSmarthostAddr,
mbgLtNgCfgEmailSmarthostPort,
mbgLtNgCfgEmailSmarthostAuth,
mbgLtNgCfgEmailSmarthostAuthUser,
mbgLtNgCfgEmailSmarthostAuthPw,
mbgLtNgCfgSnmpContact,
mbgLtNgCfgSnmpLocation,
mbgLtNgCfgVP100Display1Addr,
mbgLtNgCfgVP100Display1SN,
mbgLtNgCfgVP100Display2Addr,
mbgLtNgCfgVP100Display2SN,
mbgLtNgCfgEthernetHostname,
mbgLtNgCfgEthernetDomain,
mbgLtNgCfgEthernetNameserver1,
mbgLtNgCfgEthernetNameserver2,
mbgLtNgCfgEthernetIpv4Gateway,
mbgLtNgCfgEthernetIpv6Gateway,
mbgLtNgCfgNumberOfPhysicalIf,
mbgLtNgCfgNumberOfVirtualIf,
mbgLtNgCfgPhysicalIfMac,
mbgLtNgCfgPhysicalIfNetLinkMode,
mbgLtNgCfgPhysicalIfIndicateLink,
mbgLtNgCfgPhysicalIfBondingGroup,
mbgLtNgCfgPhysicalIfIpv6Mode,
mbgLtNgCfgVirtualIfIpv4AddrFromDhcp,
mbgLtNgCfgVirtualIfIpv4NetmaskFromDhcp,
mbgLtNgCfgVirtualIfIpv4BroadcastFromDhcp,
mbgLtNgCfgVirtualIfIpv4GatewayFromDhcp,
mbgLtNgCfgVirtualIfIpv4DnsFromDhcp,
mbgLtNgCfgVirtualIfIpv4DomainFromDhcp,
mbgLtNgCfgVirtualIfAssigned,
mbgLtNgCfgVirtualIfMac,
mbgLtNgCfgVirtualIfLabel,
mbgLtNgCfgVirtualIfServiceNtp,
mbgLtNgCfgVirtualIfServiceHttp,
mbgLtNgCfgVirtualIfServiceHttps,
mbgLtNgCfgVirtualIfServiceTelnet,
mbgLtNgCfgVirtualIfServiceSsh,
mbgLtNgCfgVirtualIfServiceSnmp,
mbgLtNgCfgVirtualIfServiceFtp,
mbgLtNgCfgVirtualIfServiceTime,
mbgLtNgCfgVirtualIfServiceDaytime,
mbgLtNgCfgVirtualIfServiceFpc,
mbgLtNgCfgVirtualIfIpv4Addr,
mbgLtNgCfgVirtualIfIpv4Netmask,
mbgLtNgCfgVirtualIfIpv4Dhcp,
mbgLtNgCfgVirtualIfIpv6Addr,
mbgLtNgCfgVirtualIfIpv6Dhcp,
mbgLtNgCfgVirtualIfIpv6RoutAdd,
mbgLtNgCfgVirtualIfIpv6LinkLocal,
mbgLtNgCfgVirtualIfVlan,
mbgLtNgCfgVirtualIfVlanTag,
mbgLtNgCfgVirtualIfVlanPrio,
mbgLtNgCfgVirtualIfCluster,
mbgLtNgCfgVirtualIfClusterIpv4Addr,
mbgLtNgCfgVirtualIfClusterIpv4Netmask,
mbgLtNgCfgVirtualIfClusterPrio,
mbgLtNgCfgEthernetGenClusterIp,
mbgLtNgCfgEthernetGenClusterPort,
mbgLtNgCfgSyslogServerAddr,
mbgLtNgCfgSyslogLoglevel,
mbgLtNgCfgWmailAddress1,
mbgLtNgCfgWmailAddress2,
mbgLtNgCfgSnmpTrapRecAddr,
mbgLtNgCfgSnmpTrapRecCommunity,
mbgLtNgCfgSnmpTrapRecVersion,
mbgLtNgCfgSnmpReadCommunity,
mbgLtNgCfgSnmpWriteCommunity,
mbgLtNgCfgSnmpV3UserName,
mbgLtNgCfgSnmpV3UserRights,
mbgLtNgCfgSnmpV3Context,
mbgLtNgCfgSnmpV3SecurityLevel,
mbgLtNgCfgSnmpV3AuthProtocol,
mbgLtNgCfgSnmpV3AuthPassphrase,
mbgLtNgCfgSnmpV3PrivProtocol,
mbgLtNgCfgSnmpV3PrivPassphrase,
mbgLtNgCfgSnmpRetries,
mbgLtNgCfgSnmpTimeout,
mbgLtNgCfgSnmpEnabledVersion,
mbgLtNgCfgNtpMaxClientOffset,
mbgLtNgCfgNtpMaxClientStratum,
mbgLtNgCfgTrapNormalOperation,
mbgLtNgCfgTrapNtpNotSync,
mbgLtNgCfgTrapNtpSync,
mbgLtNgCfgTrapNtpStopped,
mbgLtNgCfgTrapServerBoot,
mbgLtNgCfgTrapRefclockNotResponding,
mbgLtNgCfgTrapRefclockSynchronized,
mbgLtNgCfgTrapRefclockNotSynchronized,
mbgLtNgCfgTrapSecRefclockNotResponding,
mbgLtNgCfgTrapSecRefclockSynchronized,
mbgLtNgCfgTrapSecRefclockNotSynchronized,
mbgLtNgCfgTrapAntennaFaulty,
mbgLtNgCfgTrapAntennaReconnect,
mbgLtNgCfgTrapAntennaShortCircuit,
mbgLtNgCfgTrapConfigChanged,
mbgLtNgCfgTrapLeapSecAnnounced,
mbgLtNgCfgTrapNtpClientLimitExceeded,
mbgLtNgCfgTrapRefSrcDisconnected,
mbgLtNgCfgTrapRefSrcReconnected,
mbgLtNgCfgTrapShsTimeLimitError,
mbgLtNgCfgTrapShsTimeLimitWarning,
mbgLtNgCfgTrapNetworkDown,
mbgLtNgCfgTrapNetworkUp,
mbgLtNgCfgTrapPowerSupplyUp,
mbgLtNgCfgTrapPowerSupplyDown,
mbgLtNgCfgTrapFdmError,
mbgLtNgCfgTrapLowSystemResources,
mbgLtNgCfgTrapPtpNetworkDown,
mbgLtNgCfgTrapPtpNetworkUp,
mbgLtNgCfgTrapPtpStateChanged,
mbgLtNgCfgTrapPtpError,
mbgLtNgCfgTrapRefSrcLimitExceeded,
mbgLtNgCfgTrapFanDown,
mbgLtNgCfgTrapFanUp,
mbgLtNgCfgRepeatEvent,
mbgLtNgCfgRepetitions,
mbgLtNgCfgTrapWarmedUp,
mbgLtNgCfgTrapNotWarmedUp,
mbgLtNgCfgDisableRootLogin,
mbgLtNgCfgDisableUsbPort,
mbgLtNgCfgAllowNetworkDiscovery,
mbgLtNgCfgLockFrontPanel,
mbgLtNgCfgSshKeyLength,
mbgLtNgCfgSshShellTimeout,
mbgLtNgCfgWebLanguage,
mbgLtNgCfgActivateChangesAsStartup,
mbgLtNgCfgEnableFrontPanelLight,
mbgLtNgCmdExecute,
mbgLtNgCmdSetTime,
mbgLtNgFdmFreq,
mbgLtNgFdmFreqDev,
mbgLtNgFdmNomFreq,
mbgLtNgPtpNumberOfModules,
mbgLtNgPtpMode,
mbgLtNgPtpPortState,
mbgLtNgPtpLocalMac,
mbgLtNgPtpGrandmasterMac,
mbgLtNgPtpGrandmasterUuid,
mbgLtNgPtpClockAccuracy,
mbgLtNgPtpClockClass,
mbgLtNgPtpTimeSource,
mbgLtNgPtpUtcOffset,
mbgLtNgPtpTimeSeconds,
mbgLtNgPtpTsuTime,
mbgLtNgPtpSysTime,
mbgLtNgPtpPortLinkup,
mbgLtNgPtpOffsetFromGM,
mbgLtNgPtpPathDelay,
mbgLtNgPtpDelayMec,
mbgLtNgPtpDomain,
mbgLtNgPtpDelayAsymmetry,
mbgLtNgPtpAvail,
mbgLtNgSysNumberOfPowerSupplies,
mbgLtNgSysPsStatus,
mbgLtNgSysNumberOfFans,
mbgLtNgSysFanStatus,
mbgLtNgSysFanError,
mbgLtNgSysTempCelsius
}
STATUS current
DESCRIPTION
"The collection of objects for the LANTIME MIB"
::= { mbgLtNgGroups 1 }
mbgLtNgTrapsGroup NOTIFICATION-GROUP
NOTIFICATIONS {
mbgLtNgTrapNTPNotSync,
mbgLtNgTrapNTPStopped,
mbgLtNgTrapServerBoot,
mbgLtNgTrapReceiverNotResponding,
mbgLtNgTrapReceiverNotSync,
mbgLtNgTrapAntennaFaulty,
mbgLtNgTrapAntennaReconnect,
mbgLtNgTrapConfigChanged,
mbgLtNgTrapLeapSecondAnnounced,
mbgLtNgTrapSHSTimeLimitError,
mbgLtNgTrapSecondaryRecNotSync,
mbgLtNgTrapPowerSupplyFailure,
mbgLtNgTrapAntennaShortCircuit,
mbgLtNgTrapReceiverSync,
mbgLtNgTrapNTPClientAlarm,
mbgLtNgTrapPowerSupplyUp,
mbgLtNgTrapNetworkDown,
mbgLtNgTrapNetworkUp,
mbgLtNgTrapSecondaryRecNotResp,
mbgLtNgTrapXmrLimitExceeded,
mbgLtNgTrapXmrRefDisconnect,
mbgLtNgTrapXmrRefReconnect,
mbgLtNgTrapFdmError,
mbgLtNgTrapSHSTimeLimitWarning,
mbgLtNgTrapSecondaryRecSync,
mbgLtNgTrapNTPSync,
mbgLtNgTrapNormalOperation,
mbgLtNgTrapHeartbeat,
mbgLtNgTrapTestNotification,
mbgLtNgTrapPtpPortDisconnected,
mbgLtNgTrapPtpPortConnected,
mbgLtNgTrapPtpStateChanged,
mbgLtNgTrapPtpError,
mbgLtNgTrapLowSystemResources,
mbgLtNgTrapSufficientSystemResources,
mbgLtNgTrapFanDown,
mbgLtNgTrapFanUp,
mbgLtNgTrapCertificateExpired,
mbgLtNgTrapOscillatorWarmedUp,
mbgLtNgTrapOscillatorNotWarmedUp,
mbgLtNgTrapXmrRefChanged,
mbgLtNgTrapClusterMasterChanged,
mbgLtNgTrapClusterFalsetickerDetected,
mbgLtNgTrapClusterFalsetickerCleared,
mbgLtNgTrapSHSTimeLimitOk,
mbgLtNgTrapIMSError,
mbgLtNgTrapIMSOk,
mbgLtNgTrapFDMOk,
mbgLtNgTrapNTPOffsetLimitExceeded,
mbgLtNgTrapNTPOffsetLimitOk
}
STATUS current
DESCRIPTION
"The collection of traps for the LANTIME MIB"
::= { mbgLtNgGroups 2 }
END