6235 lines
188 KiB
Plaintext
6235 lines
188 KiB
Plaintext
|
|
-- *****************************************************************
|
|
-- Moxa EtherDevice Switch EDSG508E MIB
|
|
--
|
|
-- Copyright (c) 2016 by Moxa Inc.
|
|
-- All rights reserved.
|
|
-- *****************************************************************
|
|
|
|
MOXA-EDSG508E-MIB DEFINITIONS ::= BEGIN
|
|
IMPORTS
|
|
enterprises, MODULE-IDENTITY, NOTIFICATION-TYPE, IpAddress, OBJECT-TYPE
|
|
FROM SNMPv2-SMI
|
|
DateAndTime, TEXTUAL-CONVENTION, MacAddress, DisplayString
|
|
FROM SNMPv2-TC;
|
|
moxa OBJECT IDENTIFIER ::= { enterprises 8691 } -- 1.3.6.1.4.1.8691
|
|
industrialEthernet OBJECT IDENTIFIER ::= { moxa 7 } -- 1.3.6.1.4.1.8691.7
|
|
|
|
edsg508e MODULE-IDENTITY
|
|
LAST-UPDATED "201607150000Z"
|
|
ORGANIZATION "Moxa Inc."
|
|
CONTACT-INFO
|
|
"Postal: Moxa Inc.
|
|
Fl.4, No.135,Lane 235,Pao-Chiao Rd.
|
|
Shing Tien City,Taipei,Taiwan,R.O.C
|
|
|
|
Tel: +866-2-89191230 "
|
|
|
|
DESCRIPTION
|
|
"The MIB module for Moxa EDS-G508E series specific information."
|
|
|
|
REVISION "201607150000Z"
|
|
DESCRIPTION
|
|
"Support TurboPack3 v5.1 firmware,
|
|
Added new objects:
|
|
accessControlList,
|
|
Password Policy,
|
|
Login Lockout,
|
|
System Notification Message,
|
|
Audit and Log Management,
|
|
Certificate Management,
|
|
supportIfXTable,
|
|
MAC Authentication Bypass,
|
|
SMTP2,
|
|
ivlSwitch,
|
|
supportMacSticky,
|
|
varRemoteAuthSuccessTrap,
|
|
remoteAuthSuccessTrap,
|
|
varRemoteAuthFailTrap,
|
|
remoteAuthFailTrap,
|
|
configEncryptEnable,
|
|
fiberSN,
|
|
accessControlProfileTable,
|
|
calibratePeriod,
|
|
varFiberWarningTrap,
|
|
moxaNewCmdEnable,
|
|
modbusSetting,
|
|
snmpVersion,
|
|
snmpAdminSecurityLevel,
|
|
snmpUserSecurityLevel
|
|
|
|
|
|
Modified objects:
|
|
portAccessControl,
|
|
userLoginServer,
|
|
removeACLEgressPort,
|
|
mgmtInterfaceAutoLogout,
|
|
dscpMapping,
|
|
dscpInspection"
|
|
|
|
REVISION "201506300000Z"
|
|
DESCRIPTION
|
|
"Support v4.2 firmware,
|
|
Added new objects:
|
|
multicastFastForwarding,
|
|
|
|
Modified objects:
|
|
n/a"
|
|
|
|
REVISION "201310020000Z"
|
|
DESCRIPTION
|
|
"Support TurboPack2 v3.1 firmware,
|
|
Added new objects:
|
|
spanningTreePortEdge,
|
|
enableEtherNetIP,
|
|
enableModbus,
|
|
enableNTPServer,
|
|
userLoginSetting,
|
|
cpuLoading5s,
|
|
cpuLoading30s,
|
|
cpuLoading300s,
|
|
totalMemory,
|
|
freeMemory,
|
|
usedMemory,
|
|
memoryUsage,
|
|
|
|
Modified objects:
|
|
Vlan,
|
|
commRedundancy,
|
|
rateLimiting,
|
|
ieee1588Setting"
|
|
|
|
::= { industrialEthernet 69 } -- 1.3.6.1.4.1.8691.7.69
|
|
-- {enterprises moxa(8691) industrialEthernet7 69 }
|
|
-- -------------------------------------------------------------
|
|
-- groups in the MOXA-EDSG508E MIB
|
|
-- -------------------------------------------------------------
|
|
|
|
swMgmt OBJECT IDENTIFIER ::= { edsg508e 1 } -- 1.3.6.1.4.1.8691.7.69.1
|
|
swTraps OBJECT IDENTIFIER ::= { edsg508e 2 } -- 1.3.6.1.4.1.8691.7.69.2
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Textual Conventions
|
|
-- -------------------------------------------------------------
|
|
|
|
PortList ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each octet within this value specifies a set of eight
|
|
ports, with the first octet specifying ports 1 through
|
|
8, the second octet specifying ports 9 through 16, etc.
|
|
Within each octet, the most significant bit represents
|
|
the lowest numbered port, and the least significant bit
|
|
represents the highest numbered port. Thus, each port
|
|
of the bridge is represented by a single bit within the
|
|
value of this object. If that bit has a value of '1'
|
|
then that port is included in the set of ports; the port
|
|
is not included if its bit has a value of '0'."
|
|
SYNTAX OCTET STRING
|
|
|
|
-- -------------------------------------------------------------
|
|
-- swMgmt group
|
|
-- -------------------------------------------------------------
|
|
|
|
numberOfPorts OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total Ports."
|
|
::= { swMgmt 1 }
|
|
|
|
switchModel OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The switch model."
|
|
::= { swMgmt 2 }
|
|
|
|
firmwareVersion OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The firmware version."
|
|
::= { swMgmt 4 }
|
|
|
|
enableWebConfig OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), httpOrHttps(1), httpsOnly(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This enable the Web. configuration function."
|
|
::= { swMgmt 5 }
|
|
|
|
consoleLoginMode OBJECT-TYPE
|
|
SYNTAX INTEGER { menu(0), cli(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This option can change console login mode."
|
|
::= { swMgmt 51 }
|
|
|
|
enableTelnetConsole OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This enable telnet console."
|
|
::= { swMgmt 6 }
|
|
|
|
lineSwapRecovery OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This enable line-swap-fast-recovery function."
|
|
::= { swMgmt 7 }
|
|
|
|
agingTime OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Web Timeout"
|
|
::= { swMgmt 44 }
|
|
|
|
supportIfXTable OBJECT-TYPE
|
|
SYNTAX INTEGER { no(0), yes(1) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Support 64 bit Counter (ifXTable)."
|
|
::= { swMgmt 69 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- network settings
|
|
-- -------------------------------------------------------------
|
|
|
|
networkSetting OBJECT IDENTIFIER ::= { swMgmt 8 }
|
|
|
|
switchIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP Address of this switch."
|
|
::= { networkSetting 1 }
|
|
|
|
switchIpMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The netmask of this switch."
|
|
::= { networkSetting 2 }
|
|
|
|
defaultGateway OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The default gateway of this switch."
|
|
::= { networkSetting 3 }
|
|
|
|
enableAutoIpConfig OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enableDHCP(1),enableBOOTP(2)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This enable the automatic IP address configuration function."
|
|
::= { networkSetting 4 }
|
|
|
|
dnsServer1IpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The first DNS server's IP address"
|
|
::= { networkSetting 5 }
|
|
|
|
snmpTrapCommunity OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SNMP trap community name"
|
|
::= { networkSetting 6 }
|
|
|
|
trapServerAddr OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address/Domain name of SNMP trap server"
|
|
::= { networkSetting 7 }
|
|
|
|
dnsServer2IpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The second DNS server's IP address"
|
|
::= { networkSetting 8 }
|
|
|
|
snmpReadCommunity OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SNMP read community name"
|
|
::= { networkSetting 9 }
|
|
|
|
snmpTrap2Community OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Second SNMP trap community name"
|
|
::= { networkSetting 11 }
|
|
|
|
trap2ServerAddr OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address/Domain name of Second SNMP trap server"
|
|
::= { networkSetting 12 }
|
|
|
|
snmpInformEnable OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This enable the snmpInform function."
|
|
::= { networkSetting 13 }
|
|
|
|
snmpInformRetries OBJECT-TYPE
|
|
SYNTAX INTEGER (1..99)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The snmp inform retry times of SNMP trap server"
|
|
::= { networkSetting 14 }
|
|
|
|
snmpInformTimeout OBJECT-TYPE
|
|
SYNTAX INTEGER (1..300)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The snmp inform interval of SNMP trap server"
|
|
::= { networkSetting 15 }
|
|
|
|
dhcpRetryPeriods OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DHCP retry periods."
|
|
::= { networkSetting 16 }
|
|
|
|
dhcpRetryTimes OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The dhcp retry times."
|
|
::= { networkSetting 17 }
|
|
|
|
trapVersion OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
snmpv1-Trap(0),
|
|
snmpv2-Notification(1),
|
|
snmpv2-Inform(2),
|
|
snmpv3-Trap(3),
|
|
snmpv3-Inform(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Version of SNMP trap"
|
|
::= { networkSetting 18 }
|
|
|
|
snmpVersion OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
snmpv1-v2c-v3 (1),
|
|
snmpv1-v2c (2),
|
|
snmpv3 (3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Version of SNMP"
|
|
::= { networkSetting 21 }
|
|
|
|
snmpAdminSecurityLevel OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noAuthNoPriv (1),
|
|
authNoPriv (2),
|
|
authPriv (3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Admin security level"
|
|
::= { networkSetting 22 }
|
|
|
|
snmpUserSecurityLevel OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noAuthNoPriv (1),
|
|
authNoPriv (2),
|
|
authPriv (3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"User security level"
|
|
::= { networkSetting 23 }
|
|
-- -------------------------------------------------------------
|
|
-- port settings
|
|
-- -------------------------------------------------------------
|
|
|
|
portSetting OBJECT IDENTIFIER ::= { swMgmt 9 }
|
|
|
|
portTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port table."
|
|
::= { portSetting 1 }
|
|
|
|
portEntry OBJECT-TYPE
|
|
SYNTAX PortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port entry."
|
|
INDEX { portIndex }
|
|
::= { portTable 1 }
|
|
|
|
PortEntry ::=
|
|
SEQUENCE {
|
|
portIndex
|
|
INTEGER,
|
|
portDesc
|
|
DisplayString,
|
|
portEnable
|
|
INTEGER,
|
|
portSpeed
|
|
INTEGER,
|
|
portMDI
|
|
INTEGER,
|
|
portFDXFlowCtrl
|
|
INTEGER,
|
|
portName
|
|
DisplayString,
|
|
portSubdesc
|
|
DisplayString
|
|
}
|
|
|
|
portIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port index."
|
|
::= { portEntry 1 }
|
|
|
|
portDesc OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port description"
|
|
::= { portEntry 2 }
|
|
|
|
portEnable OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This enable the port."
|
|
::= { portEntry 3 }
|
|
|
|
portSpeed OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
auto(0),
|
|
speed100M-Full(1),
|
|
speed100M-Half(2),
|
|
speed10M-Full(3),
|
|
speed10M-Half(4),
|
|
speed1000M-Full(5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port speed and duplex."
|
|
::= { portEntry 4 }
|
|
|
|
portMDI OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
na(0),
|
|
auto(1),
|
|
mdi(2),
|
|
mdiX(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port MDI/MDIX."
|
|
::= { portEntry 5 }
|
|
|
|
portFDXFlowCtrl OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port FDX Flow Control"
|
|
::= { portEntry 6 }
|
|
|
|
portName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port Name"
|
|
::= { portEntry 7 }
|
|
|
|
portSubdesc OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port second description"
|
|
::= { portEntry 8 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- monitor
|
|
-- -------------------------------------------------------------
|
|
|
|
monitor OBJECT IDENTIFIER ::= { swMgmt 10 }
|
|
|
|
power1InputStatus OBJECT-TYPE
|
|
SYNTAX INTEGER { not-present(0), present(1) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of the first power input."
|
|
::= { monitor 1 }
|
|
|
|
power2InputStatus OBJECT-TYPE
|
|
SYNTAX INTEGER { not-present(0), present(1) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of the second power input."
|
|
::= { monitor 2 }
|
|
|
|
monitorPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MonitorPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port table of monitor function."
|
|
::= { monitor 3 }
|
|
|
|
monitorPortEntry OBJECT-TYPE
|
|
SYNTAX MonitorPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port table entry of monitor function."
|
|
INDEX { portIndex }
|
|
::= { monitorPortTable 1 }
|
|
|
|
MonitorPortEntry ::=
|
|
SEQUENCE {
|
|
monitorLinkStatus
|
|
INTEGER,
|
|
monitorSpeed
|
|
INTEGER,
|
|
monitorAutoMDI
|
|
INTEGER,
|
|
monitorTraffic
|
|
INTEGER,
|
|
monitorFDXFlowCtrl
|
|
INTEGER,
|
|
monitorTxTraffic
|
|
INTEGER,
|
|
monitorRxTraffic
|
|
INTEGER
|
|
}
|
|
|
|
monitorLinkStatus OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(-1), off(0), on(1) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port link status."
|
|
::= { monitorPortEntry 2}
|
|
|
|
monitorSpeed OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
speed1000M-Full(5),
|
|
speed1000M-Half(4),
|
|
speed100M-Full(3),
|
|
speed100M-Half(2),
|
|
speed10M-Full(1),
|
|
speed10M-Half(0),
|
|
na(-1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port speed and duplex status."
|
|
::= { monitorPortEntry 3 }
|
|
|
|
monitorAutoMDI OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
auto(2),
|
|
mdix(1),
|
|
mdi(0),
|
|
na(-1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port MDI/MDIX status."
|
|
::= { monitorPortEntry 4 }
|
|
|
|
monitorTraffic OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The trafic loading percentage of port."
|
|
::= { monitorPortEntry 5 }
|
|
|
|
monitorFDXFlowCtrl OBJECT-TYPE
|
|
SYNTAX INTEGER { off(0),on(1)}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Full-Duplex flow control status"
|
|
::= { monitorPortEntry 6 }
|
|
|
|
monitorTxTraffic OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The TX traffic loading percentage of port."
|
|
::= { monitorPortEntry 7 }
|
|
|
|
monitorRxTraffic OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The RTX traffic loading percentage of port."
|
|
::= { monitorPortEntry 8 }
|
|
monitorDiTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MonitorDiEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DI table of monitor function."
|
|
::= { monitor 4 }
|
|
|
|
monitorDiEntry OBJECT-TYPE
|
|
SYNTAX MonitorDiEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DI table entry of monitor function."
|
|
INDEX { diIndex }
|
|
::= { monitorDiTable 1 }
|
|
|
|
MonitorDiEntry ::=
|
|
SEQUENCE {
|
|
diIndex
|
|
INTEGER,
|
|
diInputStatus
|
|
INTEGER
|
|
}
|
|
|
|
diIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DI index of monitor function"
|
|
::= { monitorDiEntry 1 }
|
|
|
|
diInputStatus OBJECT-TYPE
|
|
SYNTAX INTEGER { off(0), on(1) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DI input status."
|
|
::= { monitorDiEntry 2 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Monitor Fiber Check Informations
|
|
-- -------------------------------------------------------------
|
|
|
|
monitorFiberCheckTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MonitorFiberCheckEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Fiber Check table of monitor function."
|
|
::= { monitor 11 }
|
|
|
|
monitorFiberCheckEntry OBJECT-TYPE
|
|
SYNTAX MonitorFiberCheckEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The fiber check table entry of monitor function."
|
|
INDEX { portIndex }
|
|
::= { monitorFiberCheckTable 1 }
|
|
|
|
|
|
MonitorFiberCheckEntry ::=
|
|
SEQUENCE {
|
|
fiberPort
|
|
DisplayString,
|
|
fiberModelName
|
|
DisplayString,
|
|
fiberWaveLength
|
|
DisplayString,
|
|
fiberVoltage
|
|
DisplayString,
|
|
fiberTemperature
|
|
DisplayString,
|
|
fiberTempWarn
|
|
DisplayString,
|
|
fiberTxPower
|
|
DisplayString,
|
|
fiberTxPowerWarn
|
|
DisplayString,
|
|
fiberRxPower
|
|
DisplayString,
|
|
fiberRxPowerWarn
|
|
DisplayString,
|
|
fiberSN
|
|
DisplayString
|
|
}
|
|
|
|
fiberPort OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The fiber index of monitor function"
|
|
::= { monitorFiberCheckEntry 1 }
|
|
|
|
fiberModelName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The fiber ModelName of monitor function"
|
|
::= { monitorFiberCheckEntry 2 }
|
|
|
|
fiberWaveLength OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The fiber wavelength"
|
|
::= { monitorFiberCheckEntry 3 }
|
|
|
|
fiberVoltage OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The fiber Voltage of monitor function"
|
|
::= { monitorFiberCheckEntry 4 }
|
|
|
|
fiberTemperature OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The fiber Temperature of monitor function"
|
|
::= { monitorFiberCheckEntry 5 }
|
|
|
|
fiberTempWarn OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Fiber Temperature warning value of monitor function"
|
|
::= { monitorFiberCheckEntry 6 }
|
|
|
|
fiberTxPower OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The fiber TX power of monitor function"
|
|
::= { monitorFiberCheckEntry 7 }
|
|
|
|
fiberTxPowerWarn OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The fiber TX power warning value of monitor function"
|
|
::= { monitorFiberCheckEntry 8 }
|
|
|
|
fiberRxPower OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The fiber RX power of monitor function"
|
|
::= { monitorFiberCheckEntry 9 }
|
|
|
|
fiberRxPowerWarn OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Fiber RX power warning value of monitor function"
|
|
::= { monitorFiberCheckEntry 10 }
|
|
|
|
fiberSN OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The fiber serial number"
|
|
::= { monitorFiberCheckEntry 13 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- power consumption
|
|
-- -------------------------------------------------------------
|
|
|
|
powerConsumption OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current power comsuption(Watts). Accurate to second decimal place."
|
|
::= { monitor 8 }
|
|
|
|
|
|
-- -------------------------------------------------------------
|
|
-- email warning
|
|
-- -------------------------------------------------------------
|
|
|
|
emailWarning OBJECT IDENTIFIER ::= { swMgmt 11 }
|
|
emailService OBJECT IDENTIFIER ::= { emailWarning 1 }
|
|
|
|
emailWarningSMTPServer OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SMTP server's Ip Address/Domain name of email warning function."
|
|
::= { emailService 1 }
|
|
|
|
emailWarningFirstRecipientEmailAddr OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The first recipient email address of email warning function."
|
|
::= { emailService 2 }
|
|
|
|
emailWarningSecondRecipientEmailAddr OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The second recipient email address of email warning function."
|
|
::= { emailService 3 }
|
|
|
|
emailWarningThirdRecipientEmailAddr OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The third recipient email address of email warning function."
|
|
::= { emailService 4 }
|
|
|
|
emailWarningFourthRecipientEmailAddr OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The fourth recipient email address of email warning function."
|
|
::= { emailService 5 }
|
|
|
|
emailWarningSMTPPort OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65536)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SMTP server's port of email warning function."
|
|
::= { emailService 6 }
|
|
|
|
emailWarningSMTPUser OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The registered user account for SMTP service of email warning function."
|
|
::= { emailService 7 }
|
|
|
|
emailWarningSMTPPassword OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The registered user password for SMTP service of email warning function."
|
|
::= { emailService 8 }
|
|
|
|
emailWarningSMTPTLS OBJECT-TYPE
|
|
SYNTAX INTEGER { no(0), yes(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SMTP server use TLS of email warning function."
|
|
::= { emailService 9 }
|
|
|
|
emailWarningSMTPAuthMethod OBJECT-TYPE
|
|
SYNTAX INTEGER { plain(0), login(1), cram-md5(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SMTP server use login method of email warning function."
|
|
::= { emailService 10 }
|
|
|
|
emailWarningSenderEmailAddr OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sender email address of email warning function."
|
|
::= { emailService 11 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- set device ip
|
|
-- -------------------------------------------------------------
|
|
|
|
setDeviceIp OBJECT IDENTIFIER ::= { swMgmt 12 }
|
|
|
|
setDevIpTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SetDevIpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The set devvice IP table."
|
|
::= { setDeviceIp 1 }
|
|
|
|
setDevIpEntry OBJECT-TYPE
|
|
SYNTAX SetDevIpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The set devvice IP table entry."
|
|
INDEX { setDevIpIndex }
|
|
::= { setDevIpTable 1 }
|
|
|
|
SetDevIpEntry ::=
|
|
SEQUENCE {
|
|
setDevIpIndex
|
|
INTEGER,
|
|
setDevIpCurrentIpofDevice
|
|
DisplayString,
|
|
setDevIpPresentBy
|
|
INTEGER,
|
|
setDevIpDedicatedIp
|
|
IpAddress
|
|
}
|
|
setDevIpIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The set devvice IP index."
|
|
::= { setDevIpEntry 1 }
|
|
|
|
setDevIpCurrentIpofDevice OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current IP address of connected to this port."
|
|
::= { setDevIpEntry 2 }
|
|
|
|
setDevIpPresentBy OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
no(0),
|
|
dhcpClient(1),
|
|
rarp(2),
|
|
bootp(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The protocol used that assigning IP to the device."
|
|
::= { setDevIpEntry 3 }
|
|
|
|
setDevIpDedicatedIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address when assign to the device connected to this port."
|
|
::= { setDevIpEntry 4 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- port mirror
|
|
-- -------------------------------------------------------------
|
|
|
|
mirroring OBJECT IDENTIFIER ::= { swMgmt 13 }
|
|
|
|
targetPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mirrored port of mirroring function."
|
|
::= { mirroring 1 }
|
|
|
|
mirroringPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mirroring port of mirroring function."
|
|
::= { mirroring 2 }
|
|
|
|
monitorDirection OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
inputDataStream(0),
|
|
outputDataStream(1),
|
|
biDirectional(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The traffic direction of mirroring function."
|
|
::= { mirroring 3 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- port trunking
|
|
-- -------------------------------------------------------------
|
|
|
|
portTrunking OBJECT IDENTIFIER ::= { swMgmt 14 }
|
|
|
|
-- trunk setting table
|
|
|
|
trunkSettingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TrunkSettingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Port Trunking Setting Table."
|
|
::= { portTrunking 1 }
|
|
|
|
trunkSettingEntry OBJECT-TYPE
|
|
SYNTAX TrunkSettingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Port Trunking Setting Entry."
|
|
INDEX { trunkSettingIndex }
|
|
::= { trunkSettingTable 1 }
|
|
|
|
TrunkSettingEntry ::=
|
|
SEQUENCE {
|
|
trunkSettingIndex
|
|
INTEGER,
|
|
trunkType
|
|
INTEGER,
|
|
trunkMemberPorts
|
|
PortList
|
|
}
|
|
|
|
trunkSettingIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Trunking Group Index."
|
|
::= { trunkSettingEntry 1 }
|
|
|
|
trunkType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
static(1),
|
|
lacp(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Trunking Group Type."
|
|
::= { trunkSettingEntry 2 }
|
|
|
|
trunkMemberPorts OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Trunking Group Member Ports."
|
|
::= { trunkSettingEntry 3 }
|
|
|
|
-- trunk table
|
|
|
|
trunkTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TrunkEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Port Trunking Table."
|
|
::= { portTrunking 2 }
|
|
|
|
trunkEntry OBJECT-TYPE
|
|
SYNTAX TrunkEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Port Trunking Entry."
|
|
INDEX { trunkIndex, trunkPort }
|
|
::= { trunkTable 1 }
|
|
|
|
TrunkEntry ::=
|
|
SEQUENCE {
|
|
trunkIndex
|
|
INTEGER,
|
|
trunkPort
|
|
INTEGER,
|
|
trunkStatus
|
|
INTEGER
|
|
}
|
|
|
|
trunkIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Trunking Group Index."
|
|
::= { trunkEntry 1 }
|
|
|
|
trunkPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Trunking Group Member Port."
|
|
::= { trunkEntry 2 }
|
|
|
|
trunkStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
success(1),
|
|
fail(2),
|
|
standby(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Trunking Port Status."
|
|
::= { trunkEntry 3 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- communication redundancy
|
|
-- -------------------------------------------------------------
|
|
|
|
commRedundancy OBJECT IDENTIFIER ::= { swMgmt 16 }
|
|
|
|
protocolOfRedundancySetup OBJECT-TYPE
|
|
SYNTAX INTEGER { spanningTree(1), turboRing(2), turboRingV2(3), turboChain(4), mstp(5)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This set the redundancy protocol of this switch. "
|
|
::= { commRedundancy 1 }
|
|
|
|
turboRing OBJECT IDENTIFIER ::= { commRedundancy 2}
|
|
|
|
turboRingMaster OBJECT-TYPE
|
|
SYNTAX INTEGER { no(0), yes(1) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Is this a Master or Slave."
|
|
::= { turboRing 1 }
|
|
|
|
turboRingMasterSetup OBJECT-TYPE
|
|
SYNTAX INTEGER { no(0), yes(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set this to be Master."
|
|
::= { turboRing 2 }
|
|
|
|
turboRingPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TurboRingPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Turbo Ring Port Table."
|
|
::= { turboRing 3 }
|
|
|
|
turboRingPortEntry OBJECT-TYPE
|
|
SYNTAX TurboRingPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Turbo Ring Port Entry."
|
|
INDEX { turboRingPortIndex }
|
|
::= { turboRingPortTable 1 }
|
|
|
|
TurboRingPortEntry ::=
|
|
SEQUENCE {
|
|
turboRingPortIndex
|
|
INTEGER,
|
|
turboRingPortStatus
|
|
INTEGER,
|
|
turboRingPortDesignatedBridge
|
|
OCTET STRING,
|
|
turboRingPortDesignatedPort
|
|
INTEGER
|
|
}
|
|
turboRingPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Turbo Ring Port Index."
|
|
::= { turboRingPortEntry 1 }
|
|
|
|
turboRingPortStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
portDisabled(0),
|
|
notTurboRingPort(1),
|
|
linkDown(2),
|
|
blocked(3),
|
|
learning(4),
|
|
forwarding(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Turbo Ring Port Status."
|
|
::= { turboRingPortEntry 2 }
|
|
|
|
turboRingPortDesignatedBridge OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MAC address of the bridge which this
|
|
port considers to be the Designated Bridge for
|
|
this port's segment."
|
|
::= { turboRingPortEntry 3 }
|
|
|
|
turboRingPortDesignatedPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Port Number of the port on the Designated
|
|
Bridge for this port's segment."
|
|
::= { turboRingPortEntry 4 }
|
|
|
|
turboRingDesignatedMaster OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MAC address of the bridge which is the Master of the TURBO RING."
|
|
::= { turboRing 6 }
|
|
|
|
turboRingRdntPort1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port number of 1st Redundant Port on the TURBO RING."
|
|
::= { turboRing 7 }
|
|
|
|
turboRingRdntPort2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port number of 2nd Redundant Port on the TURBO RING."
|
|
::= { turboRing 8 }
|
|
|
|
turboRingEnableCoupling OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This enable the ring coupling function."
|
|
::= { turboRing 9 }
|
|
|
|
turboRingCouplingPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The coupling port of ring coupling function."
|
|
::= { turboRing 10 }
|
|
|
|
turboRingCouplingPortStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
portDisabled(0),
|
|
notCouplingPort(1),
|
|
linkDown(2),
|
|
blocked(3),
|
|
forwarding(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The coupling port status of ring coupling function."
|
|
::= { turboRing 11 }
|
|
|
|
turboRingControlPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The control port of ring coupling function."
|
|
::= { turboRing 12 }
|
|
|
|
turboRingControlPortStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
portDisabled(0),
|
|
notControlPort(1),
|
|
linkDown(2),
|
|
blocked(3),
|
|
forwarding(5),
|
|
inactive(6),
|
|
active(7)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The control port status of ring coupling function."
|
|
::= { turboRing 13 }
|
|
|
|
turboRingBrokenStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
na(0),
|
|
normal(1),
|
|
broken(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Turbo Ring broken display."
|
|
::= { turboRing 14 }
|
|
|
|
spanningTree OBJECT IDENTIFIER ::= { commRedundancy 3 }
|
|
|
|
spanningTreeRoot OBJECT-TYPE
|
|
SYNTAX INTEGER { no(0), yes(1) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The root of spanning tree."
|
|
::= { spanningTree 1 }
|
|
|
|
spanningTreeBridgePriority OBJECT-TYPE
|
|
|
|
SYNTAX INTEGER {priority0(0), priority4096(4096), priority8192(8192), priority12288(12288),
|
|
priority16384(16384), priority20480(20480), priority24576(24576),
|
|
priority28672(28672), priority32768(32768), priority36864(36864),
|
|
priority40960(40960), priority45056(45056), priority49152(49152),
|
|
priority53248(53248), priority57344(57344), priority61440(61440)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The bridge priority of spanning tree protocol."
|
|
::= { spanningTree 2 }
|
|
|
|
spanningTreeHelloTime OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The hello time of spanning tree protocol."
|
|
::= { spanningTree 3 }
|
|
|
|
spanningTreeMaxAge OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The max. age of spanning tree protocol."
|
|
::= { spanningTree 4 }
|
|
|
|
spanningTreeForwardingDelay OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Tje forwarding delay of spanning tree protocol."
|
|
::= { spanningTree 5 }
|
|
|
|
spanningTreeTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SpanningTreeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The spanning tree table."
|
|
::= { spanningTree 6 }
|
|
|
|
spanningTreeEntry OBJECT-TYPE
|
|
SYNTAX SpanningTreeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The spanning tree port entry."
|
|
INDEX { spanningTreeIndex }
|
|
::= { spanningTreeTable 1 }
|
|
|
|
SpanningTreeEntry ::=
|
|
SEQUENCE {
|
|
spanningTreeIndex
|
|
INTEGER,
|
|
enableSpanningTree
|
|
INTEGER,
|
|
spanningTreePortPriority
|
|
INTEGER,
|
|
spanningTreePortCost
|
|
INTEGER,
|
|
spanningTreePortStatus
|
|
INTEGER,
|
|
spanningTreePortEdge
|
|
INTEGER
|
|
}
|
|
spanningTreeIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of spanning tree table."
|
|
::= { spanningTreeEntry 1 }
|
|
enableSpanningTree OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This enable of spanning tree protocol for this port."
|
|
::= { spanningTreeEntry 2 }
|
|
|
|
spanningTreePortPriority OBJECT-TYPE
|
|
|
|
SYNTAX INTEGER {priority0(0), priority16(16), priority32(32), priority48(48),
|
|
priority64(64), priority80(80), priority96(96), priority112(112),
|
|
priority128(128), priority144(144), priority160(160), priority176(176),
|
|
priority192(192), priority208(208), priority224(224), priority240(240)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port priority of spanning tree protocol."
|
|
::= { spanningTreeEntry 3 }
|
|
|
|
spanningTreePortCost OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port cost of spanning tree protocol."
|
|
::= { spanningTreeEntry 4 }
|
|
|
|
spanningTreePortStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
portDisabled(0),
|
|
notSpanningTreePort(1),
|
|
linkDown(2),
|
|
blocked(3),
|
|
learning(4),
|
|
forwarding(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port status of spanning tree protocol."
|
|
::= { spanningTreeEntry 5 }
|
|
|
|
spanningTreePortEdge OBJECT-TYPE
|
|
SYNTAX INTEGER { auto(0), true(1), false(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This configures the Edge Port property for this port."
|
|
::= { spanningTreeEntry 6 }
|
|
|
|
activeProtocolOfRedundancy OBJECT-TYPE
|
|
SYNTAX INTEGER { none(0), spanningTree(1), turboRing(2), turboRingV2(3), turboChain(4), mstp(5)}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This shows the active redundancy protocol of this switch now. The none(0) stauts will
|
|
be showed if only if the switch's redundancy protocol is set to spanning tree and none of
|
|
ports enable spanning tree."
|
|
::= { commRedundancy 4 }
|
|
|
|
turboRingV2 OBJECT IDENTIFIER ::= { commRedundancy 5}
|
|
|
|
turboRingV2Ring1 OBJECT IDENTIFIER ::= { turboRingV2 1 }
|
|
|
|
ringIndexRing1 OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The turboRingV2 Ring Index."
|
|
::= { turboRingV2Ring1 1 }
|
|
|
|
ringEnableRing1 OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The turboRingV2 Ring1 Enalbe Config."
|
|
::= { turboRingV2Ring1 2 }
|
|
|
|
masterSetupRing1 OBJECT-TYPE
|
|
SYNTAX INTEGER { no(0), yes(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Is this a Master or Slave."
|
|
::= { turboRingV2Ring1 3 }
|
|
|
|
masterStatusRing1 OBJECT-TYPE
|
|
SYNTAX INTEGER { no(0), yes(1) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set this to be Master."
|
|
::= { turboRingV2Ring1 4 }
|
|
|
|
designatedMasterRing1 OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MAC address of the bridge which is the Master of the turboRingV2."
|
|
::= { turboRingV2Ring1 5 }
|
|
|
|
rdnt1stPortRing1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port number of 1st Redundant Port on the turboRingV2."
|
|
::= { turboRingV2Ring1 6 }
|
|
|
|
rdnt1stPortStatusRing1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
disabled(0),
|
|
notRedundant(1),
|
|
linkdown(2),
|
|
blocking(3),
|
|
learning(4),
|
|
forwarding(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of 1st Redundant Port on the turboRingV2."
|
|
::= { turboRingV2Ring1 7 }
|
|
|
|
rdnt2ndPortRing1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port number of 2nd Redundant Port on the turboRingV2."
|
|
::= { turboRingV2Ring1 8 }
|
|
|
|
|
|
rdnt2ndPortStatusRing1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
disabled(0),
|
|
notRedundant(1),
|
|
linkdown(2),
|
|
blocking(3),
|
|
learning(4),
|
|
forwarding(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of 2nd Redundant Port on the turboRingV2."
|
|
::= { turboRingV2Ring1 9 }
|
|
|
|
brokenStatusRing1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
na(0),
|
|
normal(1),
|
|
broken(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"turboRingV2 broken display."
|
|
::= { turboRingV2Ring1 10 }
|
|
|
|
turboRingV2Ring2 OBJECT IDENTIFIER ::= { turboRingV2 2 }
|
|
|
|
ringIndexRing2 OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The turboRingV2 Ring Index."
|
|
::= { turboRingV2Ring2 1 }
|
|
|
|
ringEnableRing2 OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The turboRingV2 Ring2 Enalbe Config."
|
|
::= { turboRingV2Ring2 2 }
|
|
|
|
masterSetupRing2 OBJECT-TYPE
|
|
SYNTAX INTEGER { no(0), yes(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Is this a Master or Slave."
|
|
::= { turboRingV2Ring2 3 }
|
|
|
|
masterStatusRing2 OBJECT-TYPE
|
|
SYNTAX INTEGER { no(0), yes(1) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set this to be Master."
|
|
::= { turboRingV2Ring2 4 }
|
|
|
|
designatedMasterRing2 OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MAC address of the bridge which is the Master of the turboRingV2."
|
|
::= { turboRingV2Ring2 5 }
|
|
|
|
rdnt1stPortRing2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port number of 1st Redundant Port on the turboRingV2."
|
|
::= { turboRingV2Ring2 6 }
|
|
|
|
rdnt1stPortStatusRing2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
disabled(0),
|
|
notRedundant(1),
|
|
linkdown(2),
|
|
blocking(3),
|
|
learning(4),
|
|
forwarding(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of 1st Redundant Port on the turboRingV2."
|
|
::= { turboRingV2Ring2 7 }
|
|
|
|
rdnt2ndPortRing2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port number of 2nd Redundant Port on the turboRingV2."
|
|
::= { turboRingV2Ring2 8 }
|
|
|
|
|
|
rdnt2ndPortStatusRing2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
disabled(0),
|
|
notRedundant(1),
|
|
linkdown(2),
|
|
blocking(3),
|
|
learning(4),
|
|
forwarding(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of 2nd Redundant Port on the turboRingV2."
|
|
::= { turboRingV2Ring2 9 }
|
|
|
|
brokenStatusRing2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
na(0),
|
|
normal(1),
|
|
broken(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"turboRingV2 broken display."
|
|
::= { turboRingV2Ring2 10 }
|
|
|
|
turboRingV2Coupling OBJECT IDENTIFIER ::= { turboRingV2 3 }
|
|
|
|
couplingEnable OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Setting the ring coupling enable."
|
|
::= { turboRingV2Coupling 1 }
|
|
|
|
couplingMode OBJECT-TYPE
|
|
SYNTAX INTEGER { dualHoming(1), couplingBackup(2), couplingPrimary(3) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Setting the ring coupling mode."
|
|
::= { turboRingV2Coupling 2 }
|
|
|
|
coupling1stPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If in 'DUAL HOMING' mode,port name is 'Primary port',If in 'COUPLING' mode,port name is 'Coupling port'"
|
|
::= { turboRingV2Coupling 3 }
|
|
|
|
coupling1stPortStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
disabled(0),
|
|
notRedundant(1),
|
|
linkdown(2),
|
|
blocking(3),
|
|
learning(4),
|
|
forwarding(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 1st coupling port status of coupling function."
|
|
::= { turboRingV2Coupling 4 }
|
|
|
|
coupling2ndPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If in 'DUAL HOMING' mode,port name is 'Backup port',If in 'COUPLING' mode,port name is no used."
|
|
::= { turboRingV2Coupling 5 }
|
|
|
|
coupling2ndPortStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
disabled(0),
|
|
notRedundant(1),
|
|
linkdown(2),
|
|
blocking(3),
|
|
learning(4),
|
|
forwarding(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 2nd coupling port status of coupling function."
|
|
::= { turboRingV2Coupling 6 }
|
|
|
|
|
|
turboChain OBJECT IDENTIFIER ::= { commRedundancy 6}
|
|
|
|
turboChainRole OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
head(1),
|
|
member(2),
|
|
tail(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Role of TURBO CHAIN."
|
|
::= { turboChain 1 }
|
|
|
|
turboChainPort1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port number of 1st Redundant Port on the TURBO CHAIN.
|
|
If switch role is Turbo Chain Head, this is Head port,
|
|
If Switch role is Turbo Chain Tail, this is Tail port."
|
|
::= { turboChain 2 }
|
|
|
|
turboChainPort2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port number of 2nd Redundant Port on the TURBO CHAIN.
|
|
It is the member port of TurboChain"
|
|
::= { turboChain 3 }
|
|
|
|
turboChainPort1Status OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
notTurboChainPort(0),
|
|
linkDown(1),
|
|
blocking(2),
|
|
blocked(3),
|
|
forwarding(4),
|
|
na(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Turbo Chain Port Status."
|
|
::= { turboChain 4 }
|
|
|
|
turboChainPort2Status OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
notTurboChainPort(0),
|
|
linkDown(1),
|
|
blocking(2),
|
|
blocked(3),
|
|
forwarding(4),
|
|
na(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Turbo Chain Port Status."
|
|
::= { turboChain 5 }
|
|
|
|
turboChainPort1PartnerBridge OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MAC address of the next bridge "
|
|
::= { turboChain 6 }
|
|
|
|
turboChainPort2PartnerBridge OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MAC address of the neighbor Turbo Chain switch"
|
|
::= { turboChain 7 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- relay warning
|
|
-- -------------------------------------------------------------
|
|
|
|
relayWarning OBJECT IDENTIFIER ::= { swMgmt 17 }
|
|
|
|
relayWarningTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RelayWarningEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The relay warning table."
|
|
::= { relayWarning 11 }
|
|
|
|
relayWarningEntry OBJECT-TYPE
|
|
SYNTAX RelayWarningEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Relay Warning Entry."
|
|
INDEX { relayAlarmIndex }
|
|
::= { relayWarningTable 1 }
|
|
|
|
RelayWarningEntry ::=
|
|
SEQUENCE {
|
|
relayAlarmIndex
|
|
INTEGER,
|
|
relayWarningRelayContact
|
|
INTEGER,
|
|
overrideRelayWarningSetting
|
|
INTEGER,
|
|
relayWarningPower1Off
|
|
INTEGER,
|
|
relayWarningPower1OffStatus
|
|
INTEGER,
|
|
relayWarningPower2Off
|
|
INTEGER,
|
|
relayWarningPower2OffStatus
|
|
INTEGER,
|
|
relayWarningTurboRingBreak
|
|
INTEGER,
|
|
relayWarningTurboRingBreakStatus
|
|
INTEGER
|
|
}
|
|
|
|
relayAlarmIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Relay alarm index."
|
|
::= { relayWarningEntry 1 }
|
|
|
|
relayWarningRelayContact OBJECT-TYPE
|
|
SYNTAX INTEGER {closed(0) ,opened(1)}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The first Relay contact status."
|
|
::= { relayWarningEntry 2 }
|
|
|
|
|
|
overrideRelayWarningSetting OBJECT-TYPE
|
|
SYNTAX INTEGER { no(0), yes(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Override the relay warning setting."
|
|
::= { relayWarningEntry 3 }
|
|
|
|
relayWarningPower1Off OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The relay contact will be opened while the first power input off."
|
|
::= { relayWarningEntry 4 }
|
|
|
|
relayWarningPower1OffStatus OBJECT-TYPE
|
|
SYNTAX INTEGER { not-triggered(0), triggered(1) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The relay contact is opened as the first power input off.."
|
|
::= { relayWarningEntry 5 }
|
|
|
|
relayWarningPower2Off OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The relay contact will be opened while the second power input off."
|
|
::= { relayWarningEntry 6 }
|
|
|
|
relayWarningPower2OffStatus OBJECT-TYPE
|
|
SYNTAX INTEGER { not-triggered(0), triggered(1) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The relay contact is opened as the second power input off."
|
|
::= { relayWarningEntry 7 }
|
|
|
|
relayWarningTurboRingBreak OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The relay contact will be opened while turbo ring break."
|
|
::= { relayWarningEntry 8 }
|
|
|
|
relayWarningTurboRingBreakStatus OBJECT-TYPE
|
|
SYNTAX INTEGER { not-triggered(0), triggered(1) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The relay contact is opened while turbo ring is broken."
|
|
::= { relayWarningEntry 9 }
|
|
|
|
portRelayWarningTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PortRelayWarningEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The relay warning port table."
|
|
::= { relayWarning 12 }
|
|
|
|
portRelayWarningEntry OBJECT-TYPE
|
|
SYNTAX PortRelayWarningEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Port Relay Warning Entry."
|
|
INDEX { portIndex,relayAlarmIndex }
|
|
::= { portRelayWarningTable 1 }
|
|
|
|
PortRelayWarningEntry ::=
|
|
SEQUENCE {
|
|
relayWarningLinkChanged
|
|
INTEGER,
|
|
relayWarningLinkChangedStatus
|
|
INTEGER,
|
|
relayWarningTrafficOverload
|
|
INTEGER,
|
|
relayWarningTrafficOverloadStatus
|
|
INTEGER,
|
|
relayWarningRxTrafficThreshold
|
|
INTEGER,
|
|
relayWarningTrafficDuration
|
|
INTEGER
|
|
}
|
|
|
|
relayWarningLinkChanged OBJECT-TYPE
|
|
SYNTAX INTEGER { ignore(0), on2off(1), off2on(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The relay contact will be opened while this port's link status is changed."
|
|
::= { portRelayWarningEntry 1 }
|
|
|
|
relayWarningLinkChangedStatus OBJECT-TYPE
|
|
SYNTAX INTEGER { not-triggered(0), triggered(1) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The relay contact is opened as this port's link status is changed."
|
|
::= { portRelayWarningEntry 2 }
|
|
|
|
relayWarningTrafficOverload OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The relay contact will be opened while this port's traffic is overload."
|
|
::= { portRelayWarningEntry 3 }
|
|
|
|
relayWarningTrafficOverloadStatus OBJECT-TYPE
|
|
SYNTAX INTEGER { not-triggered(0), triggered(1) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The relay contact is opened as this port's traffic is overload."
|
|
::= { portRelayWarningEntry 4 }
|
|
|
|
relayWarningRxTrafficThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The threshold of the port traffic will be over loading."
|
|
::= { portRelayWarningEntry 5 }
|
|
|
|
relayWarningTrafficDuration OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The duration of the port traffic will be over loading."
|
|
::= { portRelayWarningEntry 6 }
|
|
|
|
diRelayWarningTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DiRelayWarningEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The relay warning DI table."
|
|
::= { relayWarning 13 }
|
|
|
|
diRelayWarningEntry OBJECT-TYPE
|
|
SYNTAX DiRelayWarningEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DI Relay Warning Entry."
|
|
INDEX { diIndex,relayAlarmIndex }
|
|
::= { diRelayWarningTable 1 }
|
|
|
|
DiRelayWarningEntry ::=
|
|
SEQUENCE {
|
|
relayWarningDiInputChanged
|
|
INTEGER,
|
|
relayWarningDiInputChangedStatus
|
|
INTEGER
|
|
}
|
|
|
|
relayWarningDiInputChanged OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), off(1), on(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The relay contact will be opened while the DI input changed."
|
|
::= { diRelayWarningEntry 1 }
|
|
|
|
relayWarningDiInputChangedStatus OBJECT-TYPE
|
|
SYNTAX INTEGER { not-triggered(0), triggered(1) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The relay contact is opened as the first DI input changed.."
|
|
::= { diRelayWarningEntry 2 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- traffic prioritization
|
|
-- -------------------------------------------------------------
|
|
|
|
trafficPrioritization OBJECT IDENTIFIER ::= { swMgmt 18 }
|
|
|
|
qosClassification OBJECT IDENTIFIER ::= { trafficPrioritization 1 }
|
|
schedulingMechanism OBJECT-TYPE
|
|
SYNTAX INTEGER {schedweightfair(0),schedstrict(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The scheduling mechanism."
|
|
::= { qosClassification 1 }
|
|
|
|
qosPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF QosPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The QoS port table."
|
|
::= { qosClassification 2 }
|
|
|
|
qosPortEntry OBJECT-TYPE
|
|
SYNTAX QosPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The QoS Port Entry."
|
|
INDEX { portIndex }
|
|
::= { qosPortTable 1 }
|
|
|
|
QosPortEntry ::=
|
|
SEQUENCE {
|
|
dscpInspection
|
|
INTEGER,
|
|
cosInspection
|
|
INTEGER,
|
|
portPriority
|
|
INTEGER
|
|
}
|
|
|
|
dscpInspection OBJECT-TYPE
|
|
SYNTAX INTEGER {no (0),yes(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This enable the inspection of dscp field."
|
|
::= { qosPortEntry 1 }
|
|
|
|
cosInspection OBJECT-TYPE
|
|
SYNTAX INTEGER {no (0),yes(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This enable the inspection of CoS field."
|
|
::= { qosPortEntry 2 }
|
|
|
|
portPriority OBJECT-TYPE
|
|
SYNTAX INTEGER {priority0(0), priority1(1), priority2(2), priority3(3),
|
|
priority4(4), priority5(5), priority6(6), priority7(7)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The deault priority of the port."
|
|
::= { qosPortEntry 3 }
|
|
|
|
priorityMapping OBJECT IDENTIFIER ::= { trafficPrioritization 2 }
|
|
priorityMappingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PriorityMappingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The priority mapping table."
|
|
::= { priorityMapping 1 }
|
|
|
|
priorityMappingEntry OBJECT-TYPE
|
|
SYNTAX PriorityMappingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Priority mapping Entry."
|
|
INDEX { priorityTag}
|
|
::= { priorityMappingTable 1 }
|
|
|
|
PriorityMappingEntry ::=
|
|
SEQUENCE {
|
|
priorityTag
|
|
INTEGER,
|
|
priorityMappedQueue
|
|
INTEGER
|
|
}
|
|
|
|
priorityTag OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The priority tag of QOS field."
|
|
::= { priorityMappingEntry 1 }
|
|
|
|
priorityMappedQueue OBJECT-TYPE
|
|
SYNTAX INTEGER {trafficclass0(0),trafficclass1(1),trafficclass2(2),trafficclass3(3)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The egress queue corresponding to it's priority value."
|
|
::= { priorityMappingEntry 2 }
|
|
|
|
dscpMapping OBJECT IDENTIFIER ::= { trafficPrioritization 3 }
|
|
dscpMappingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DscpMappingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DSCP mapping table."
|
|
::= { dscpMapping 1 }
|
|
|
|
dscpMappingEntry OBJECT-TYPE
|
|
SYNTAX DscpMappingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DSCP mapping Entry."
|
|
INDEX { dscpClass }
|
|
::= { dscpMappingTable 1 }
|
|
|
|
DscpMappingEntry ::=
|
|
SEQUENCE {
|
|
dscpClass
|
|
INTEGER,
|
|
dscpMappedPriority
|
|
INTEGER
|
|
}
|
|
|
|
dscpClass OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DSCP class of TOS field."
|
|
::= { dscpMappingEntry 1 }
|
|
|
|
dscpMappedPriority OBJECT-TYPE
|
|
SYNTAX INTEGER {priority0(0), priority1(1), priority2(2), priority3(3),
|
|
priority4(4), priority5(5), priority6(6), priority7(7)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The frame's priority corresponding to it's DSCP class value."
|
|
::= { dscpMappingEntry 2 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- vlan
|
|
-- -------------------------------------------------------------
|
|
|
|
vlan OBJECT IDENTIFIER ::= { swMgmt 19 }
|
|
vlanPortSettingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF VlanPortSettingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The vlan seting table of ports."
|
|
::= { vlan 1 }
|
|
|
|
vlanPortSettingEntry OBJECT-TYPE
|
|
SYNTAX VlanPortSettingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Port Setting Entry of VLAN."
|
|
INDEX { portIndex }
|
|
::= { vlanPortSettingTable 1 }
|
|
|
|
VlanPortSettingEntry ::=
|
|
SEQUENCE {
|
|
portVlanType
|
|
INTEGER,
|
|
portDefaultVid
|
|
INTEGER,
|
|
portFixedVid
|
|
DisplayString,
|
|
portFixedVidUntag
|
|
DisplayString,
|
|
portForbiddenVid
|
|
DisplayString
|
|
}
|
|
|
|
portVlanType OBJECT-TYPE
|
|
SYNTAX INTEGER {access(0),trunk(1),hybrid(2)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The vlan type of port."
|
|
::= { vlanPortSettingEntry 1 }
|
|
|
|
portDefaultVid OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4094)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The PVID of port."
|
|
::= { vlanPortSettingEntry 2 }
|
|
|
|
portFixedVid OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The fixed vids of (trunk) port."
|
|
::= { vlanPortSettingEntry 3 }
|
|
|
|
portForbiddenVid OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The forbidden vids of (trunk)port."
|
|
::= { vlanPortSettingEntry 4 }
|
|
|
|
portFixedVidUntag OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The fixed untag vids of (trunk) port."
|
|
::= { vlanPortSettingEntry 5 }
|
|
|
|
vlanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF VlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN table."
|
|
::= { vlan 2 }
|
|
|
|
vlanEntry OBJECT-TYPE
|
|
SYNTAX VlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VLAN Entry."
|
|
INDEX { vlanId }
|
|
::= { vlanTable 1 }
|
|
|
|
VlanEntry ::=
|
|
SEQUENCE {
|
|
vlanId
|
|
INTEGER,
|
|
joinedAccessPorts
|
|
PortList,
|
|
joinedTrunkPorts
|
|
PortList,
|
|
joinedHybridPorts
|
|
PortList,
|
|
vlanName
|
|
DisplayString
|
|
}
|
|
|
|
vlanId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4094)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN id."
|
|
::= { vlanEntry 1 }
|
|
|
|
joinedAccessPorts OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The access ports that joined this VID."
|
|
::= { vlanEntry 2 }
|
|
|
|
joinedTrunkPorts OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The trunk ports that joined this VID."
|
|
::= { vlanEntry 3 }
|
|
|
|
joinedHybridPorts OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The hybrid ports that joined this VID."
|
|
::= { vlanEntry 4 }
|
|
|
|
vlanName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN name."
|
|
::= { vlanEntry 5 }
|
|
|
|
managementVlanId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The management VLAN id."
|
|
::= { vlan 3 }
|
|
|
|
vlanType OBJECT-TYPE
|
|
SYNTAX INTEGER {tagBased(0),portBased(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VLAN Type."
|
|
::= { vlan 4 }
|
|
|
|
portbaseVlanSettingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PortbaseVlanSettingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Port base Vlan Setting Table."
|
|
::= { vlan 5 }
|
|
|
|
portbaseVlanSettingEntry OBJECT-TYPE
|
|
SYNTAX PortbaseVlanSettingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Port base Vlan Setting Entry."
|
|
INDEX { portbaseVlanSettingIndex }
|
|
::= { portbaseVlanSettingTable 1 }
|
|
|
|
PortbaseVlanSettingEntry ::=
|
|
SEQUENCE {
|
|
portbaseVlanSettingIndex
|
|
INTEGER,
|
|
portbaseVlanMemberPorts
|
|
PortList
|
|
}
|
|
|
|
portbaseVlanSettingIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"port base Vlan Group Index."
|
|
::= { portbaseVlanSettingEntry 1 }
|
|
|
|
portbaseVlanMemberPorts OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"port base Vlan Group Member Ports."
|
|
::= { portbaseVlanSettingEntry 2 }
|
|
|
|
enableGvrp OBJECT-TYPE
|
|
SYNTAX INTEGER {disable(0),enable(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable GVRP."
|
|
::= { vlan 6 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- multicast filtering
|
|
-- -------------------------------------------------------------
|
|
|
|
multicastFiltering OBJECT IDENTIFIER ::= { swMgmt 20 }
|
|
igmpSnooping OBJECT IDENTIFIER ::= { multicastFiltering 1 }
|
|
|
|
querierQueryInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (20..600)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This query interval of the querier function for this VLAN."
|
|
::= { igmpSnooping 1 }
|
|
|
|
igmpSnoopingSettingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IgmpSnoopingSettingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IGMP snooping setting table."
|
|
::= { igmpSnooping 2 }
|
|
|
|
igmpSnoopingSettingEntry OBJECT-TYPE
|
|
SYNTAX IgmpSnoopingSettingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IGMP snooping setting Entry."
|
|
INDEX { vlanId }
|
|
::= { igmpSnoopingSettingTable 1 }
|
|
|
|
IgmpSnoopingSettingEntry ::=
|
|
SEQUENCE {
|
|
enableIgmpSnooping
|
|
INTEGER,
|
|
enableQuerier
|
|
INTEGER,
|
|
fixedMulticastQuerierPorts
|
|
PortList,
|
|
learnedMulticastQuerierPorts
|
|
PortList
|
|
}
|
|
|
|
enableIgmpSnooping OBJECT-TYPE
|
|
SYNTAX INTEGER {disable(0),enable(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This enable the IGMP snooping functon in this VLAN."
|
|
::= { igmpSnoopingSettingEntry 1 }
|
|
|
|
enableQuerier OBJECT-TYPE
|
|
SYNTAX INTEGER {disable(0), igmpv2(1), igmpv3(2)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This enable the querier function for this VLAN."
|
|
::= { igmpSnoopingSettingEntry 2 }
|
|
|
|
fixedMulticastQuerierPorts OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ports that multicast-Querier exist."
|
|
::= { igmpSnoopingSettingEntry 3 }
|
|
|
|
learnedMulticastQuerierPorts OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ports that multicast-Querier exist."
|
|
::= { igmpSnoopingSettingEntry 4 }
|
|
|
|
enableGlobalIgmpSnooping OBJECT-TYPE
|
|
SYNTAX INTEGER {disable(0),enable(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This enable the IGMP snooping functon ."
|
|
::= { igmpSnooping 4 }
|
|
|
|
multicastFastForwarding OBJECT-TYPE
|
|
SYNTAX INTEGER {disable(0),enable(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This Enable Multicast Fast Forwarding Mode functon ."
|
|
::= { igmpSnooping 7 }
|
|
|
|
staticMulticast OBJECT IDENTIFIER ::= { multicastFiltering 2 }
|
|
staticMulticastTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF StaticMulticastEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The static multicast table."
|
|
::= { staticMulticast 1 }
|
|
|
|
staticMulticastEntry OBJECT-TYPE
|
|
SYNTAX StaticMulticastEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Static multicast Entry."
|
|
INDEX { staticMulticastAddress }
|
|
::= { staticMulticastTable 1 }
|
|
|
|
StaticMulticastEntry ::=
|
|
SEQUENCE {
|
|
staticMulticastAddress
|
|
MacAddress,
|
|
staticMulticastPorts
|
|
PortList,
|
|
staticMulticastStatus
|
|
INTEGER
|
|
}
|
|
|
|
staticMulticastAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The static multicast address."
|
|
::= { staticMulticastEntry 1 }
|
|
|
|
staticMulticastPorts OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port map of the static multicast address."
|
|
::= { staticMulticastEntry 2 }
|
|
|
|
staticMulticastStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
active(1),
|
|
createAndGo(4),
|
|
createAndWait(5),
|
|
destroy(6)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status is active to indicate normal.
|
|
Use createAndGo to create new on multiple SET.
|
|
Use createAndWait to create new on one SET all then actvie.
|
|
Use destroy to delete this row."
|
|
::= { staticMulticastEntry 3 }
|
|
|
|
--
|
|
-- GMRP
|
|
--
|
|
|
|
gmrp OBJECT IDENTIFIER ::= { multicastFiltering 3 }
|
|
|
|
-- gmrp setting table
|
|
|
|
gmrpSettingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GmrpSettingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The GMRP setting table."
|
|
::= { gmrp 1 }
|
|
|
|
gmrpSettingEntry OBJECT-TYPE
|
|
SYNTAX GmrpSettingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The GMRP Setting Entry."
|
|
INDEX { portIndex }
|
|
::= { gmrpSettingTable 1 }
|
|
|
|
GmrpSettingEntry ::=
|
|
SEQUENCE {
|
|
enableGMRP
|
|
INTEGER
|
|
}
|
|
|
|
enableGMRP OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable/Disable GMRP."
|
|
::= { gmrpSettingEntry 1 }
|
|
|
|
-- gmrp status
|
|
|
|
gmrpTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GmrpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The GMRP status table."
|
|
::= { gmrp 2 }
|
|
|
|
gmrpEntry OBJECT-TYPE
|
|
SYNTAX GmrpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The GMRP Status Entry."
|
|
INDEX { gmrpMulticastGroup }
|
|
::= { gmrpTable 1 }
|
|
|
|
GmrpEntry ::=
|
|
SEQUENCE {
|
|
gmrpMulticastGroup
|
|
MacAddress,
|
|
gmrpFixedPorts
|
|
PortList,
|
|
gmrpLearnedPorts
|
|
PortList
|
|
}
|
|
|
|
gmrpMulticastGroup OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"GMRP multicast group."
|
|
::= { gmrpEntry 1 }
|
|
|
|
gmrpFixedPorts OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ports that joined GMRP multicast group manually."
|
|
::= { gmrpEntry 2 }
|
|
|
|
gmrpLearnedPorts OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ports that joined GMRP multicast group by GMRP learning."
|
|
::= { gmrpEntry 3 }
|
|
|
|
|
|
-- -------------------------------------------------------------
|
|
-- rate limiting
|
|
-- -------------------------------------------------------------
|
|
|
|
rateLimiting OBJECT IDENTIFIER ::= { swMgmt 21 }
|
|
|
|
rateLimitingAction OBJECT-TYPE
|
|
SYNTAX INTEGER {droppacket(0),portDisable(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The rate limiting mode."
|
|
::= { rateLimiting 4 }
|
|
|
|
-- droppacketMode --
|
|
|
|
-- ingress --
|
|
droppacketModeRateLimitingIngressTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DroppacketModeRateLimitingIngressEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The rate limiting table."
|
|
::= { rateLimiting 1 }
|
|
|
|
droppacketModeRateLimitingIngressEntry OBJECT-TYPE
|
|
SYNTAX DroppacketModeRateLimitingIngressEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Rate limiting Entry."
|
|
INDEX { portIndex }
|
|
::= { droppacketModeRateLimitingIngressTable 1 }
|
|
|
|
DroppacketModeRateLimitingIngressEntry ::=
|
|
SEQUENCE {
|
|
ingressLimitRate
|
|
INTEGER
|
|
}
|
|
|
|
ingressLimitRate OBJECT-TYPE
|
|
SYNTAX INTEGER {notlimited(0), percentage03(1), percentage05(2), percentage10(3),
|
|
percentage15(4), percentage25(5), percentage35(6), percentage50(7),
|
|
percentage65(8), percentage85(9)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ingress limit mode."
|
|
::= { droppacketModeRateLimitingIngressEntry 1 }
|
|
|
|
-- broadcastStorm --
|
|
|
|
broadcastStormProtection OBJECT IDENTIFIER ::= { rateLimiting 2 }
|
|
|
|
bcastStormProtection OBJECT-TYPE
|
|
SYNTAX INTEGER {disable(0),enable(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Broadcast Storm Protection"
|
|
::= { broadcastStormProtection 1 }
|
|
|
|
bcastStormProtectionIncludeMcast OBJECT-TYPE
|
|
SYNTAX INTEGER {no(0),yes(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Broadcast Storm Protection includes Multicast packets"
|
|
::= { broadcastStormProtection 2 }
|
|
|
|
bcastStormProtectionIncludeUcast OBJECT-TYPE
|
|
SYNTAX INTEGER {no(0),yes(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Broadcast Storm Protection includes Unicast packets"
|
|
::= { broadcastStormProtection 3 }
|
|
|
|
-- portDisableMode --
|
|
|
|
portDisableMode OBJECT IDENTIFIER ::= { rateLimiting 3 }
|
|
|
|
portDisableModePeriod OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Check time. "
|
|
::= {portDisableMode 1 }
|
|
|
|
portDisableModeTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PortDisableModeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The rate limiting table."
|
|
::= { portDisableMode 2 }
|
|
|
|
portDisableModeEntry OBJECT-TYPE
|
|
SYNTAX PortDisableModeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Rate limiting Entry."
|
|
INDEX { portIndex }
|
|
::= { portDisableModeTable 1 }
|
|
|
|
PortDisableModeEntry ::=
|
|
SEQUENCE {
|
|
ingressLimit
|
|
INTEGER
|
|
}
|
|
|
|
ingressLimit OBJECT-TYPE
|
|
SYNTAX INTEGER {notlimited(0), rateMega1Fps4464(1), rateMega2Fps7441(2), rateMega3Fps14881(3),
|
|
rateMega4Fps22322(4), rateMega5Fps37203(5), rateMega6Fps52084(6), rateMega7Fps74405(7), rateGiga1Fps44640(8), rateGiga2Fps74410(9), rateGiga3Fps148810(10),
|
|
rateGiga4Fps223220(11), rateGiga5Fps372030(12), rateGiga6Fps520840(13), rateGiga7Fps744050(14)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ingress limit mode."
|
|
::= { portDisableModeEntry 1 }
|
|
|
|
|
|
-- -------------------------------------------------------------
|
|
-- security
|
|
-- -------------------------------------------------------------
|
|
|
|
security OBJECT IDENTIFIER ::= { swMgmt 22 }
|
|
-- -------------------------------------------------------------
|
|
-- user login authentication
|
|
-- -------------------------------------------------------------
|
|
userLoginSetting OBJECT IDENTIFIER ::= { security 1 }
|
|
|
|
userLoginServer OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
tacacsLocal(1),
|
|
radiusLocal(2),
|
|
tacacs(3),
|
|
radius(4),
|
|
local(5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set user login server option."
|
|
::= { userLoginSetting 1 }
|
|
|
|
tacacsServerSetting OBJECT IDENTIFIER ::= { userLoginSetting 2 }
|
|
tacacsLoginAuthServer OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set Tacacs+ Server IP Address/Domain name."
|
|
::= { tacacsServerSetting 1 }
|
|
|
|
tacacsLoginAuthPort OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set Tacacs+ Port."
|
|
::= {tacacsServerSetting 2 }
|
|
|
|
tacacsLoginAuthSharedKey OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set Tacacs+ Shared Key."
|
|
::= { tacacsServerSetting 3 }
|
|
|
|
tacacsLoginAuthAuthType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ascii(0),
|
|
pap(1),
|
|
chap(2),
|
|
mschap(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set Tacacs+ Shared Key."
|
|
::= { tacacsServerSetting 4 }
|
|
|
|
tacacsLoginAuthTimeout OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set Tacacs+ Shared Key."
|
|
::= { tacacsServerSetting 5 }
|
|
|
|
radiusServerSetting OBJECT IDENTIFIER ::= { userLoginSetting 3 }
|
|
radiusLoginAuthServer OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set Radius Server IP Address/Domain name."
|
|
::= { radiusServerSetting 1 }
|
|
|
|
radiusLoginAuthPort OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set Radius Port."
|
|
::= { radiusServerSetting 2 }
|
|
|
|
radiusLoginAuthSharedKey OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set Radius Shared Key."
|
|
::= { radiusServerSetting 3 }
|
|
|
|
radiusLoginAuthAuthType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
pap(0),
|
|
chap(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set Radius Shared Key."
|
|
::= { radiusServerSetting 4 }
|
|
|
|
radiusLoginAuthTimeout OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set Radius Shared Key."
|
|
::= { radiusServerSetting 5 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- port access control
|
|
-- -------------------------------------------------------------
|
|
|
|
portAccessControl OBJECT IDENTIFIER ::= { security 2 }
|
|
|
|
--
|
|
-- static port lock
|
|
--
|
|
|
|
staticPortLockLegacy OBJECT IDENTIFIER ::= { portAccessControl 1 }
|
|
|
|
staticPortLockLegacyAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The static port lock address."
|
|
::= { staticPortLockLegacy 1 }
|
|
|
|
staticPortLockLegacyPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port of the static port lock address."
|
|
::= { staticPortLockLegacy 2 }
|
|
|
|
staticPortLockLegacyStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
active(1),
|
|
createAndGo(4)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status is active to indicate normal.
|
|
Use createAndGo to create new on multiple SET."
|
|
::= { staticPortLockLegacy 3 }
|
|
|
|
--
|
|
-- IEEE 802.1X
|
|
--
|
|
|
|
dot1x OBJECT IDENTIFIER ::= { portAccessControl 2 }
|
|
|
|
-- ieee 802.1x global settings
|
|
|
|
dataBaseOption OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
local(1),
|
|
radius(2),
|
|
radiuslocal(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set IEEE 802.1X database option."
|
|
::= { dot1x 1 }
|
|
|
|
dot1xReauthEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable/Disable IEEE 802.1X Re-authentication."
|
|
::= { dot1x 5 }
|
|
|
|
dot1xReauthPeriod OBJECT-TYPE
|
|
SYNTAX INTEGER (60..3600)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set IEEE 802.1X Re-authentication Period."
|
|
::= { dot1x 6 }
|
|
|
|
-- ieee 802.1X port setting table
|
|
|
|
dot1xSettingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dot1xSettingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IEEE 802.1X Port Setting Table."
|
|
::= { dot1x 7 }
|
|
|
|
dot1xSettingEntry OBJECT-TYPE
|
|
SYNTAX Dot1xSettingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IEEE 802.1X Port Setting Entry."
|
|
INDEX { portIndex }
|
|
::= { dot1xSettingTable 1 }
|
|
|
|
Dot1xSettingEntry ::=
|
|
SEQUENCE {
|
|
enableDot1X
|
|
INTEGER
|
|
}
|
|
|
|
enableDot1X OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable/Disable IEEE 802.1X."
|
|
::= { dot1xSettingEntry 1 }
|
|
|
|
-- ieee 802.1X re-authentication table
|
|
|
|
dot1xReauthTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dot1xReauthEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IEEE 802.1X Re-authentication Table."
|
|
::= { dot1x 8 }
|
|
|
|
dot1xReauthEntry OBJECT-TYPE
|
|
SYNTAX Dot1xReauthEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IEEE 802.1X Re-authentication Entry."
|
|
INDEX { dot1xReauthPortIndex }
|
|
::= { dot1xReauthTable 1 }
|
|
|
|
Dot1xReauthEntry ::=
|
|
SEQUENCE {
|
|
dot1xReauthPortIndex
|
|
INTEGER,
|
|
dot1xReauth
|
|
INTEGER
|
|
}
|
|
|
|
dot1xReauthPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IEEE 802.1X Enabled Port Index."
|
|
::= { dot1xReauthEntry 1 }
|
|
|
|
dot1xReauth OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(0),
|
|
yes(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Reauth IEEE 802.1X."
|
|
::= { dot1xReauthEntry 2 }
|
|
|
|
-- ieee 802.1x dot1x Radius Server settings
|
|
|
|
dot1xRadius OBJECT IDENTIFIER ::= { dot1x 9 }
|
|
dot1xSameAsAuthServer OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
notSame(0),
|
|
same(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set Radius Server IP Address/Domain name."
|
|
::= { dot1xRadius 1 }
|
|
dot1x1stRadiusServer OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set Radius Server IP Address/Domain name."
|
|
::= { dot1xRadius 2 }
|
|
|
|
dot1x1stRadiusPort OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set Radius Port."
|
|
::= { dot1xRadius 3 }
|
|
|
|
dot1x1stRadiusSharedKey OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set Radius Shared Key."
|
|
::= { dot1xRadius 4 }
|
|
dot1x2ndRadiusServer OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set Radius Server IP Address/Domain name."
|
|
::= { dot1xRadius 5 }
|
|
|
|
dot1x2ndRadiusPort OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set Radius Port."
|
|
::= { dot1xRadius 6 }
|
|
|
|
dot1x2ndRadiusSharedKey OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set Radius Shared Key."
|
|
::= { dot1xRadius 7 }
|
|
|
|
|
|
--
|
|
-- port access control table
|
|
--
|
|
|
|
portAccessControlTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PortAccessControlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Port Access Control table."
|
|
::= { portAccessControl 3 }
|
|
|
|
portAccessControlEntry OBJECT-TYPE
|
|
SYNTAX PortAccessControlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Port Access Control table entry."
|
|
INDEX { portAccessControlAddress, portAccessControlVid }
|
|
::= { portAccessControlTable 1 }
|
|
|
|
PortAccessControlEntry ::=
|
|
SEQUENCE {
|
|
portAccessControlAddress
|
|
MacAddress,
|
|
portAccessControlPortNo
|
|
INTEGER,
|
|
portAccessControlAccessStatus
|
|
INTEGER,
|
|
portAccessControlStatus
|
|
INTEGER,
|
|
portAccessControlVid
|
|
INTEGER
|
|
}
|
|
|
|
portAccessControlAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MAC address which is static locked or IEEE 802.1X authorized."
|
|
::= { portAccessControlEntry 1 }
|
|
|
|
portAccessControlPortNo OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port number that the Port Access Control address resides."
|
|
::= { portAccessControlEntry 2 }
|
|
|
|
portAccessControlAccessStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
staticLock(1),
|
|
authorized(2),
|
|
unAuthorized(3),
|
|
authorizing(4),
|
|
macAddrSticky(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The access status of the Port Access Control address."
|
|
::= { portAccessControlEntry 3 }
|
|
|
|
portAccessControlStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
active(1),
|
|
createAndGo(4),
|
|
createAndWait(5),
|
|
destroy(6)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status is active to indicate normal.
|
|
Use createAndGo to create new on multiple SET.
|
|
Use createAndWait to create new on one SET all then actvie.
|
|
Use destroy to delete this row."
|
|
::= { portAccessControlEntry 4 }
|
|
|
|
portAccessControlVid OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The vid number that the Port Access Control address resides."
|
|
::= { portAccessControlEntry 5 }
|
|
|
|
|
|
--
|
|
-- Port Security
|
|
--
|
|
portSecurity OBJECT IDENTIFIER ::= { portAccessControl 4 }
|
|
|
|
portSecurityModeTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PortSecurityModeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Port security mode"
|
|
::= { portSecurity 1 }
|
|
|
|
portSecurityModeEntry OBJECT-TYPE
|
|
SYNTAX PortSecurityModeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Port security mode entry."
|
|
INDEX { portSecurityModePort }
|
|
::= { portSecurityModeTable 1 }
|
|
|
|
PortSecurityModeEntry ::=
|
|
SEQUENCE {
|
|
portSecurityModePort
|
|
INTEGER,
|
|
portSecurityModeSelect
|
|
INTEGER,
|
|
portSecurityModeLimit
|
|
INTEGER,
|
|
portSecurityModeViolationPortDisable
|
|
INTEGER,
|
|
portSecurityModeStatus
|
|
INTEGER
|
|
}
|
|
|
|
portSecurityModePort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set port security mode to specific port."
|
|
::= { portSecurityModeEntry 1 }
|
|
|
|
portSecurityModeSelect OBJECT-TYPE
|
|
SYNTAX INTEGER { normal-mode(0), static-portlock(1), mac-address-sticky(2) }
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Select the port security mode of the port."
|
|
::= { portSecurityModeEntry 2 }
|
|
|
|
portSecurityModeLimit OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If port security mode is MAC address sticky, set the limit of the port.
|
|
If port security mode is not MAC address sticky, set the limit to 0."
|
|
::= { portSecurityModeEntry 3 }
|
|
|
|
portSecurityModeViolationPortDisable OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1) }
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable the violation port disable."
|
|
::= { portSecurityModeEntry 4 }
|
|
|
|
portSecurityModeStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
active(1),
|
|
createAndGo(4)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status is active to indicate normal.
|
|
Use createAndGo to create new on multiple SET."
|
|
::= { portSecurityModeEntry 5 }
|
|
|
|
staticPortLock OBJECT IDENTIFIER ::= { portSecurity 2 }
|
|
|
|
staticPortLockAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The static port lock address."
|
|
::= { staticPortLock 1 }
|
|
|
|
staticPortLockPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port of the static port lock address."
|
|
::= { staticPortLock 2 }
|
|
|
|
staticPortLockStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
active(1),
|
|
createAndGo(4)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status is active to indicate normal.
|
|
Use createAndGo to create new on multiple SET."
|
|
::= { staticPortLock 3 }
|
|
|
|
staticPortLockVid OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Add vlan of the static port lock address. For SVL switch, vid should be 0"
|
|
::= { staticPortLock 4 }
|
|
|
|
macAddressSticky OBJECT IDENTIFIER ::= { portSecurity 3 }
|
|
|
|
macAddressStickyAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Manually add a MAC sticky address."
|
|
::= { macAddressSticky 1 }
|
|
|
|
macAddressStickyPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Add MAC sticky address to the specific port."
|
|
::= { macAddressSticky 2 }
|
|
|
|
macAddressStickyVid OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Add MAC sticky address to the specific vlan. For SVL switch, vid should be 0"
|
|
::= { macAddressSticky 3 }
|
|
|
|
macAddressStickyStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
active(1),
|
|
createAndGo(4)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status is active to indicate normal.
|
|
Use createAndGo to create new on multiple SET."
|
|
::= { macAddressSticky 4 }
|
|
|
|
--
|
|
-- MAC Authentication Bypass
|
|
--
|
|
|
|
mab OBJECT IDENTIFIER ::= { portAccessControl 5 }
|
|
|
|
-- MAB global settings
|
|
|
|
mabDBOption OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
radius(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set MAB database option."
|
|
::= { mab 1 }
|
|
|
|
mabReauthEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable/Disable MAB Re-authorizing."
|
|
::= { mab 2 }
|
|
|
|
mabReauthPeriod OBJECT-TYPE
|
|
SYNTAX INTEGER (60..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set MAB Re-authorizing Period."
|
|
::= { mab 3 }
|
|
|
|
mabRestartEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable/Disable MAB Re-start."
|
|
::= { mab 4 }
|
|
|
|
mabRestartPeriod OBJECT-TYPE
|
|
SYNTAX INTEGER (5..300)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set MAB Re-start Period."
|
|
::= { mab 5 }
|
|
|
|
-- ieee 802.1X port setting table
|
|
|
|
mabSettingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MABSettingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MAB Setting Table."
|
|
::= { mab 6 }
|
|
|
|
mabSettingEntry OBJECT-TYPE
|
|
SYNTAX MABSettingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MAB Port Setting Entry."
|
|
INDEX { portIndex }
|
|
::= { mabSettingTable 1 }
|
|
|
|
MABSettingEntry ::=
|
|
SEQUENCE {
|
|
enableMAB
|
|
INTEGER
|
|
}
|
|
|
|
enableMAB OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable/Disable MAB."
|
|
::= { mabSettingEntry 1 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- accessible ip
|
|
-- -------------------------------------------------------------
|
|
|
|
accessibleIP OBJECT IDENTIFIER ::= { swMgmt 30 }
|
|
|
|
enableAccessibleIP OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable the accessible IP address list."
|
|
::= { accessibleIP 1 }
|
|
|
|
accessibleIpTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AccessibleIpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"accessibleIP."
|
|
::= { accessibleIP 2 }
|
|
|
|
accessibleIpEntry OBJECT-TYPE
|
|
SYNTAX AccessibleIpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Accessible IP address entry."
|
|
INDEX { accessibleIpAddress }
|
|
::= { accessibleIpTable 1 }
|
|
|
|
AccessibleIpEntry ::=
|
|
SEQUENCE {
|
|
accessibleIpAddress
|
|
IpAddress,
|
|
accessibleIpNetMask
|
|
IpAddress,
|
|
accessibleIpStatus
|
|
INTEGER
|
|
}
|
|
|
|
accessibleIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Accessible IP address"
|
|
::= { accessibleIpEntry 1 }
|
|
|
|
accessibleIpNetMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Accessible IP netmask."
|
|
::= { accessibleIpEntry 2 }
|
|
|
|
accessibleIpStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
active(1),
|
|
createAndGo(4),
|
|
createAndWait(5),
|
|
destroy(6)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status is active to indicate normal.
|
|
Use createAndGo to create new on multiple SET.
|
|
Use createAndWait to create new on one SET all then actvie.
|
|
Use destroy to delete this row."
|
|
::= { accessibleIpEntry 3 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- system file update
|
|
-- -------------------------------------------------------------
|
|
|
|
sysFileUpdate OBJECT IDENTIFIER ::= { swMgmt 31 }
|
|
tftpServer OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The TFTP Server name(IP Address)"
|
|
::= { sysFileUpdate 1 }
|
|
|
|
firmwarePathName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The path name of firmware file in the TFTP Server"
|
|
::= { sysFileUpdate 2 }
|
|
|
|
logPathName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The path name of log file in the TFTP Server"
|
|
::= { sysFileUpdate 3 }
|
|
|
|
confPathName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The path name of configuration file in the TFTP Server"
|
|
::= { sysFileUpdate 4 }
|
|
|
|
tftpUpdate OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
importFirmware(1),
|
|
importConfig(2),
|
|
exportConfig(3),
|
|
exportLog(4)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { sysFileUpdate 5 }
|
|
|
|
|
|
|
|
|
|
-- -------------------------------------------------------------
|
|
-- time setting
|
|
-- -------------------------------------------------------------
|
|
|
|
timeSetting OBJECT IDENTIFIER ::= { swMgmt 32 }
|
|
|
|
sysDateTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The date time of system"
|
|
::= { timeSetting 1 }
|
|
|
|
calibratePeriod OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The period (seconds) that calibrate with time server"
|
|
::= { timeSetting 2 }
|
|
|
|
timeServer1 OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The first time server"
|
|
::= { timeSetting 3 }
|
|
|
|
timeServer2 OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The second time server"
|
|
::= { timeSetting 4 }
|
|
|
|
daylightSaving OBJECT IDENTIFIER ::= { timeSetting 5 }
|
|
|
|
startMonth OBJECT-TYPE
|
|
SYNTAX INTEGER { na(0), jan(1), feb(2), mar(3), apr(4), may(5), jun(6), jul(7), aug(8), sep(9), oct(10), nov(11), dec(12) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Setting Start Month of Daylight Saving time"
|
|
::= { daylightSaving 1 }
|
|
|
|
startWeek OBJECT-TYPE
|
|
SYNTAX INTEGER { na(0), week1(1), week2(2), week3(3), week4(4), weeklast(6) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Setting Start Week of Daylight Saving time"
|
|
::= { daylightSaving 2 }
|
|
|
|
startDay OBJECT-TYPE
|
|
SYNTAX INTEGER { na(0), sun(1), mon(2), tue(3), wed(4), thu(5), fri(6), sat(7)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Setting Start Day of Daylight Saving time"
|
|
::= { daylightSaving 3 }
|
|
|
|
startHour OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Setting Start Hour of Daylight Saving time"
|
|
::= { daylightSaving 4 }
|
|
|
|
endMonth OBJECT-TYPE
|
|
SYNTAX INTEGER { na(0), jan(1), feb(2), mar(3), apr(4), may(5), jun(6), jul(7), aug(8), sep(9), oct(10), nov(11), dec(12) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Setting End Month of Daylight Saving time"
|
|
::= { daylightSaving 5 }
|
|
|
|
endWeek OBJECT-TYPE
|
|
SYNTAX INTEGER { na(0), week1(1), week2(2), week3(3), week4(4), weeklast(6) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Setting End Week of Daylight Saving time"
|
|
::= { daylightSaving 6 }
|
|
|
|
endDay OBJECT-TYPE
|
|
SYNTAX INTEGER { na(0), sun(1), mon(2), tue(3), wed(4), thu(5), fri(6), sat(7)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Setting End Day of Daylight Saving time"
|
|
::= { daylightSaving 7 }
|
|
|
|
endHour OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Setting End Hour of Daylight Saving time"
|
|
::= { daylightSaving 8 }
|
|
|
|
offsetHours OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Setting Offset Hours of Daylight Saving time"
|
|
::= { daylightSaving 9 }
|
|
|
|
enableNTPServer OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This enable NTP Server."
|
|
::= { timeSetting 6 }
|
|
|
|
clockSource OBJECT-TYPE
|
|
SYNTAX INTEGER { local(0), sntp(1), ntp(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The clock source of system"
|
|
::= { timeSetting 7 }
|
|
|
|
|
|
-- -------------------------------------------------------------
|
|
-- NTP Authentication setting
|
|
-- -------------------------------------------------------------
|
|
ntpAuthenticate OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"NTP authentication"
|
|
::= { timeSetting 8 }
|
|
|
|
ntpPeerTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NtpPeerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"NTP peer table"
|
|
::= { timeSetting 9 }
|
|
|
|
ntpPeerEntry OBJECT-TYPE
|
|
SYNTAX NtpPeerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"NTP peer settings"
|
|
INDEX { ntpPeerIndex }
|
|
::= { ntpPeerTable 1 }
|
|
|
|
NtpPeerEntry ::=
|
|
SEQUENCE {
|
|
ntpPeerIndex
|
|
INTEGER,
|
|
ntpPeerAddress
|
|
DisplayString,
|
|
ntpPeerAuthenticate
|
|
INTEGER,
|
|
ntpPeerAuthenticateKeyid
|
|
INTEGER
|
|
}
|
|
|
|
ntpPeerIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"NTP peer index"
|
|
::= { ntpPeerEntry 1 }
|
|
|
|
ntpPeerAddress OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"NTP peer address"
|
|
::= { ntpPeerEntry 2 }
|
|
|
|
ntpPeerAuthenticate OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"NTP authentication"
|
|
::= { ntpPeerEntry 3 }
|
|
|
|
ntpPeerAuthenticateKeyid OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"NTP authentication key Id"
|
|
::= { ntpPeerEntry 4 }
|
|
|
|
ntpAuthenticateKeyTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NtpAuthenticateKeyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"NTP authenticate key table"
|
|
::= { timeSetting 10 }
|
|
|
|
ntpAuthenticateKeyEntry OBJECT-TYPE
|
|
SYNTAX NtpAuthenticateKeyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"NTP authenticate key settings"
|
|
INDEX { ntpAuthenticateKeyIndex }
|
|
::= { ntpAuthenticateKeyTable 1 }
|
|
|
|
NtpAuthenticateKeyEntry ::=
|
|
SEQUENCE {
|
|
ntpAuthenticateKeyIndex
|
|
INTEGER,
|
|
ntpAuthenticateKeyID
|
|
INTEGER,
|
|
ntpAuthenticateKeyString
|
|
DisplayString,
|
|
ntpAuthenticateKeyTrusted
|
|
INTEGER
|
|
}
|
|
|
|
ntpAuthenticateKeyIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"NTP authenticate key index"
|
|
::= { ntpAuthenticateKeyEntry 1 }
|
|
|
|
ntpAuthenticateKeyID OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"NTP authenticate key id"
|
|
::= { ntpAuthenticateKeyEntry 2 }
|
|
|
|
|
|
ntpAuthenticateKeyString OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"NTP authenticate key string"
|
|
::= { ntpAuthenticateKeyEntry 3 }
|
|
|
|
ntpAuthenticateKeyTrusted OBJECT-TYPE
|
|
SYNTAX INTEGER { distrust(0), trusted(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"NTP authenticate key trusted"
|
|
::= { ntpAuthenticateKeyEntry 4 }
|
|
|
|
|
|
-- -------------------------------------------------------------
|
|
-- TurboRing Dip Switch setting
|
|
-- -------------------------------------------------------------
|
|
|
|
dipSwitchSetting OBJECT IDENTIFIER ::= { swMgmt 34 }
|
|
|
|
dipSwitchEnableTurboRing OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable TurboRing Dip Switch functions"
|
|
::= { dipSwitchSetting 1 }
|
|
|
|
dipSwitchTurboRingPole OBJECT-TYPE
|
|
SYNTAX INTEGER { off(0), on(1) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The TurboRing Pole status of Dip switch."
|
|
::= { dipSwitchSetting 2 }
|
|
|
|
dipSwitchRingCouplingPole OBJECT-TYPE
|
|
SYNTAX INTEGER { off(0), on(1) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Ring Coupling Pole status of Dip switch."
|
|
::= { dipSwitchSetting 3 }
|
|
|
|
dipSwitchRingMasterPole OBJECT-TYPE
|
|
SYNTAX INTEGER { off(0), on(1) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Ring Master Pole status of Dip switch."
|
|
::= { dipSwitchSetting 4 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Auto-Backup Media setting
|
|
-- -------------------------------------------------------------
|
|
|
|
backupMediaSetting OBJECT IDENTIFIER ::= { swMgmt 35 }
|
|
|
|
abc02Status OBJECT-TYPE
|
|
SYNTAX INTEGER { device-not-present(0), unauthorized-media(1), detecting(2), working(3), ready-and-removable(4) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current status of ABC-02"
|
|
::= { backupMediaSetting 2 }
|
|
|
|
abc02AutoImportConfig OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Auto load configuration from ABC to system when boot up"
|
|
::= { backupMediaSetting 3 }
|
|
|
|
abc02AutoExportConfig OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Auto backup to ABC-02 when configuration change"
|
|
::= { backupMediaSetting 4 }
|
|
|
|
abc02AutoExportLog OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Auto backup of event log to prevent overwrite"
|
|
::= { backupMediaSetting 5 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Warm Start setting
|
|
-- -------------------------------------------------------------
|
|
|
|
enableWarmStart OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
no(0),
|
|
yes(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable to restart MOXA ethernet switch."
|
|
::= { swMgmt 36 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Syslog setting
|
|
-- -------------------------------------------------------------
|
|
|
|
syslogSetting OBJECT IDENTIFIER ::= { swMgmt 37 }
|
|
|
|
syslogServer1 OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The syslog server 1"
|
|
::= { syslogSetting 1 }
|
|
|
|
syslogServer1port OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The syslog server 1 port"
|
|
::= { syslogSetting 2 }
|
|
|
|
syslogServer2 OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The syslog server 2"
|
|
::= { syslogSetting 3 }
|
|
|
|
syslogServer2port OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The syslog server 2 port"
|
|
::= { syslogSetting 4 }
|
|
|
|
syslogServer3 OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The syslog server 3"
|
|
::= { syslogSetting 5 }
|
|
|
|
syslogServer3port OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The syslog server 3 port"
|
|
::= { syslogSetting 6 }
|
|
|
|
|
|
-- -------------------------------------------------------------
|
|
-- DHCP Relay Agent group
|
|
-- -------------------------------------------------------------
|
|
dhcpRelayAgentSetting OBJECT IDENTIFIER ::= { swMgmt 39 }
|
|
|
|
dhcpServer1 OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The dhcp Relay Agent Server 1."
|
|
::= { dhcpRelayAgentSetting 1 }
|
|
|
|
dhcpServer2 OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The dhcp Relay Agent Server 2."
|
|
::= { dhcpRelayAgentSetting 2 }
|
|
|
|
dhcpServer3 OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The dhcp Relay Agent Server 3."
|
|
::= { dhcpRelayAgentSetting 3 }
|
|
|
|
dhcpServer4 OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The dhcp Relay Agent Server 4."
|
|
::= { dhcpRelayAgentSetting 4 }
|
|
|
|
option82Setting OBJECT IDENTIFIER ::= { dhcpRelayAgentSetting 5 }
|
|
|
|
enableOption82 OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable DHCP Option 82"
|
|
::= { option82Setting 1 }
|
|
|
|
option82Type OBJECT-TYPE
|
|
SYNTAX INTEGER { ip(0), mac(1), client-id(2), other(3) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Option 82 Type selector "
|
|
::= { option82Setting 2 }
|
|
|
|
option82Value OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Option 82 Type Value"
|
|
::= { option82Setting 3 }
|
|
|
|
option82ValueDisplay OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Option 82 Type Value Display"
|
|
::= { option82Setting 4 }
|
|
|
|
dhcpFunctionTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DhcpFunctionEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DHCP Function Table."
|
|
::= { dhcpRelayAgentSetting 6 }
|
|
|
|
dhcpFunctionEntry OBJECT-TYPE
|
|
SYNTAX DhcpFunctionEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DHCP Function Table Entry."
|
|
INDEX { dhcpPortIndex }
|
|
::= { dhcpFunctionTable 1 }
|
|
|
|
DhcpFunctionEntry ::=
|
|
SEQUENCE {
|
|
dhcpPortIndex
|
|
INTEGER,
|
|
circuitID
|
|
DisplayString,
|
|
option82Enable
|
|
INTEGER
|
|
}
|
|
|
|
dhcpPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DHCP Port Index."
|
|
::= { dhcpFunctionEntry 1 }
|
|
|
|
circuitID OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Circuit ID."
|
|
::= { dhcpFunctionEntry 2 }
|
|
|
|
option82Enable OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This enable option 82 of the port."
|
|
::= { dhcpFunctionEntry 3 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- PTP Setting
|
|
-- -------------------------------------------------------------
|
|
|
|
ieee1588Setting OBJECT IDENTIFIER ::= { swMgmt 41 }
|
|
|
|
ptpv1Setting OBJECT IDENTIFIER ::= { ieee1588Setting 1 }
|
|
|
|
enablePtpv1 OBJECT-TYPE
|
|
SYNTAX INTEGER {disable(0),enable(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This enable the PTP functon."
|
|
::= { ptpv1Setting 1 }
|
|
|
|
clockModev1 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
v1BC(0),
|
|
v2E2E2stepTC(1),
|
|
v2P2PTC(3),
|
|
v2E2EBC(4),
|
|
v2P2PBC(5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"the clock mode of the PTP clock."
|
|
::= { ptpv1Setting 2 }
|
|
|
|
syncIntervalv1 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
oneSec(0),
|
|
twoSec(1),
|
|
fourSec(2),
|
|
eightSec(3),
|
|
sixteenSec(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"the logSyncInterval of the PTP clock."
|
|
::= { ptpv1Setting 3 }
|
|
|
|
subDomainNamev1 OBJECT-TYPE
|
|
SYNTAX INTEGER {dflt(0),alt1(1),alt2(2),alt3(3)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The subdomain name of the PTP clock."
|
|
::= { ptpv1Setting 4 }
|
|
|
|
preferMasterv1 OBJECT-TYPE
|
|
SYNTAX INTEGER {false(0),true(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This enable the PTP prefer master function."
|
|
::= { ptpv1Setting 5 }
|
|
|
|
ptpv2Setting OBJECT IDENTIFIER ::= { ieee1588Setting 2 }
|
|
|
|
enablePtp OBJECT-TYPE
|
|
SYNTAX INTEGER {disable(0),enable(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This enable the PTP functon."
|
|
::= { ptpv2Setting 1 }
|
|
|
|
clockMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
v1BC(0),
|
|
v2E2E2stepTC(1),
|
|
v2P2PTC(3),
|
|
v2E2EBC(4),
|
|
v2P2PBC(5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"the clock mode of the PTP clock."
|
|
::= { ptpv2Setting 2 }
|
|
|
|
transport OBJECT-TYPE
|
|
SYNTAX INTEGER {ieee802dot3(0),ipv4(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"the transport mode of the PTP clock."
|
|
::= { ptpv2Setting 3 }
|
|
|
|
syncInterval OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
t128msec(-3),
|
|
t256msec(-2),
|
|
t512msec(-1),
|
|
t1sec(0),
|
|
t2sec(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"the logSyncInterval of the PTP clock."
|
|
::= { ptpv2Setting 4 }
|
|
|
|
logMinDelayReqInterval OBJECT-TYPE
|
|
SYNTAX INTEGER {t1sec(0),t2sec(1),t4sec(2),t8sec(3),t16sec(4),t32sec(5)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"the logMinDelayReqInterval of the PTP clock."
|
|
::= { ptpv2Setting 5 }
|
|
|
|
logMinPdelayReqInterval OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
t512msec(-1),
|
|
t1sec(0),
|
|
t2sec(1),
|
|
t4sec(2),
|
|
t8sec(3),
|
|
t16sec(4),
|
|
t32sec(5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"the logMinPdelayReqInterval of the PTP clock."
|
|
::= { ptpv2Setting 6 }
|
|
|
|
logAnnounceInterval OBJECT-TYPE
|
|
SYNTAX INTEGER {t1sec(0),t2sec(1),t4sec(2),t8sec(3),t16sec(4)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"the logAnnounceInterval of the PTP clock."
|
|
::= { ptpv2Setting 7 }
|
|
|
|
announceReceiptTimeout OBJECT-TYPE
|
|
SYNTAX INTEGER (2..10)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"the announceReceiptTimeout of the PTP clock."
|
|
::= { ptpv2Setting 8 }
|
|
|
|
priority1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"the priority1 of the PTP clock."
|
|
::= { ptpv2Setting 9 }
|
|
|
|
priority2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"the priority2 of the PTP clock."
|
|
::= { ptpv2Setting 10 }
|
|
|
|
clockClass OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"the clockClass of the PTP clock."
|
|
::= { ptpv2Setting 11 }
|
|
|
|
domainNumber OBJECT-TYPE
|
|
SYNTAX INTEGER {dflt(0),alt1(1),alt2(2),alt3(3)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The domain number of the PTP clock."
|
|
::= { ptpv2Setting 12 }
|
|
|
|
localUtcOffset OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"the UTC offset of the local PTP clock."
|
|
::= { ptpv2Setting 13 }
|
|
|
|
localUtcOffsetValid OBJECT-TYPE
|
|
SYNTAX INTEGER {false(0),true(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"the UTC offset valid of the local PTP clock."
|
|
::= { ptpv2Setting 14 }
|
|
|
|
localLeap59 OBJECT-TYPE
|
|
SYNTAX INTEGER {false(0),true(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"the leap59 of the local PTP clock."
|
|
::= { ptpv2Setting 15 }
|
|
|
|
localLeap61 OBJECT-TYPE
|
|
SYNTAX INTEGER {false(0),true(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"the leap61 of the local PTP clock."
|
|
::= { ptpv2Setting 16 }
|
|
|
|
localPtpTimescale OBJECT-TYPE
|
|
SYNTAX INTEGER {arb(0),ptp(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"the timescale of the local PTP clock."
|
|
::= { ptpv2Setting 17 }
|
|
|
|
localArbTime OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"the ARB time of the local PTP clock."
|
|
::= { ptpv2Setting 18 }
|
|
|
|
ptpv1Status OBJECT IDENTIFIER ::= { ieee1588Setting 3 }
|
|
|
|
offsetToMasterv1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The offset to master for nsec."
|
|
::= { ptpv1Status 1 }
|
|
|
|
meanPathDelayv1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mean path delay of the PTP clock."
|
|
::= { ptpv1Status 2 }
|
|
|
|
grandMasterUuidv1 OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The grand master UUID address of the PTP clock."
|
|
::= { ptpv1Status 3 }
|
|
|
|
parentUuidv1 OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The parent master UUID address of the PTP clock."
|
|
::= { ptpv1Status 4 }
|
|
|
|
clockStratumv1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The clock stratum of the PTP clock."
|
|
::= { ptpv1Status 5 }
|
|
|
|
clockIdentifierv1 OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The clock identifier of the PTP clock."
|
|
::= { ptpv1Status 6 }
|
|
|
|
ptpv2Status OBJECT IDENTIFIER ::= { ieee1588Setting 4 }
|
|
|
|
offsetToMaster OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The offset to master for nsec."
|
|
::= { ptpv2Status 1 }
|
|
|
|
meanPathDelay OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mean path delay of the PTP clock."
|
|
::= { ptpv2Status 2 }
|
|
|
|
parentIdentity OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The parent identity of the PTP clock."
|
|
::= { ptpv2Status 3 }
|
|
|
|
grandmasterIdentity OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The grandmaster identity of the PTP clock."
|
|
::= { ptpv2Status 4 }
|
|
|
|
grandmasterClockClass OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The grandmaster clockClass of the PTP clock."
|
|
::= { ptpv2Status 5 }
|
|
|
|
grandmasterClockAccuracy OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The grandmaster clockAccuracy of the PTP clock."
|
|
::= { ptpv2Status 6 }
|
|
|
|
grandmasterPriority1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The grandmaster priority1 of the PTP clock."
|
|
::= { ptpv2Status 7 }
|
|
|
|
grandmasterPriority2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The grandmaster priority2 of the PTP clock."
|
|
::= { ptpv2Status 8 }
|
|
|
|
stepsRemoved OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The steps removed of the PTP clock."
|
|
::= { ptpv2Status 9 }
|
|
|
|
currentUtcOffset OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current utc offset of the PTP clock."
|
|
::= { ptpv2Status 10 }
|
|
|
|
currentUtcOffsetValid OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current utc offset valid flag of the PTP clock."
|
|
::= { ptpv2Status 11 }
|
|
|
|
leap59 OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The leap59 of the PTP clock."
|
|
::= { ptpv2Status 12 }
|
|
|
|
leap61 OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The leap61 of the PTP clock."
|
|
::= { ptpv2Status 13 }
|
|
|
|
ptpTimescale OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ptp timescale of the PTP clock."
|
|
::= { ptpv2Status 14 }
|
|
|
|
timesource OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The timesource of the PTP clock."
|
|
::= { ptpv2Status 15 }
|
|
|
|
ptpPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PtpPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ptp port table."
|
|
::= { ieee1588Setting 5 }
|
|
|
|
ptpPortEntry OBJECT-TYPE
|
|
SYNTAX PtpPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ptp port entry."
|
|
INDEX { ptpPortIndex }
|
|
::= { ptpPortTable 1 }
|
|
|
|
PtpPortEntry ::=
|
|
SEQUENCE {
|
|
ptpPortIndex
|
|
INTEGER,
|
|
ptpPortEnable
|
|
INTEGER,
|
|
ptpPortStatus
|
|
INTEGER
|
|
}
|
|
|
|
ptpPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ptp port index."
|
|
::= { ptpPortEntry 1 }
|
|
|
|
ptpPortEnable OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This enable the ptp port."
|
|
::= { ptpPortEntry 2 }
|
|
|
|
ptpPortStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ptpInitializing(0),
|
|
ptpFaulty(1),
|
|
ptpDisabled(2),
|
|
ptpListening(3),
|
|
ptpPreMaster(4),
|
|
ptpMaster(5),
|
|
ptpPassive(6),
|
|
ptpUncalibrated(7),
|
|
ptpSlave(8)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This port status of the PTP clock."
|
|
::= { ptpPortEntry 3 }
|
|
|
|
|
|
-- -------------------------------------------------------------
|
|
-- swTraps group
|
|
-- -------------------------------------------------------------
|
|
|
|
mibNotificationsPrefix OBJECT IDENTIFIER
|
|
::= { edsg508e 0 }
|
|
|
|
varconfigChangeTrap OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1), -- no config change happened
|
|
configChanged(2) -- config changed
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The configuration has been changed."
|
|
::= { swTraps 1 }
|
|
|
|
configChangeTrap NOTIFICATION-TYPE
|
|
OBJECTS { varconfigChangeTrap }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The configuration has been changed."
|
|
::= { mibNotificationsPrefix 1 }
|
|
|
|
varpower1Trap OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1), -- no power on/off
|
|
on2off(2), -- power on to power off
|
|
off2on(3) -- power off to power on
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The power on/off changed."
|
|
::= { swTraps 2 }
|
|
|
|
power1Trap NOTIFICATION-TYPE
|
|
OBJECTS { varpower1Trap }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The power on/off changed."
|
|
::= { mibNotificationsPrefix 2 }
|
|
|
|
varpower2Trap OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1), -- no power on/off
|
|
on2off(2), -- power on to power off
|
|
off2on(3) -- power off to power on
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The power on/off changed."
|
|
::= { swTraps 3 }
|
|
|
|
power2Trap NOTIFICATION-TYPE
|
|
OBJECTS { varpower2Trap }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The power on/off changed."
|
|
::= { mibNotificationsPrefix 3 }
|
|
|
|
vartrafficOverloadTrap OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ethernet port's traffic loading exceeds the pre-defined value."
|
|
::= { swTraps 4 }
|
|
|
|
trafficOverloadTrap NOTIFICATION-TYPE
|
|
OBJECTS { vartrafficOverloadTrap }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ethernet port's traffic loading exceeds the pre-defined value."
|
|
::= { mibNotificationsPrefix 4 }
|
|
|
|
varredundancyTopologyChangedTrap OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1), -- no topology change
|
|
topologyChanged(2), -- topology changed
|
|
topologyChangedTurboChainHead(3), -- topology change turboChain head
|
|
topologyChangedTurboChainTail(4) -- topology change turboChain tail
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The redundancy topology has been changed."
|
|
::= { swTraps 5 }
|
|
|
|
redundancyTopologyChangedTrap NOTIFICATION-TYPE
|
|
OBJECTS { varredundancyTopologyChangedTrap }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The redundancy topology has been changed."
|
|
::= { mibNotificationsPrefix 5 }
|
|
|
|
varturboRingCouplingPortChangedTrap OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1), -- no topology change
|
|
couplingPortChanged(2) -- coupling port changed
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The coupling path of Turbo Ring has been changed."
|
|
::= { swTraps 6 }
|
|
|
|
turboRingCouplingPortChangedTrap NOTIFICATION-TYPE
|
|
OBJECTS { varturboRingCouplingPortChangedTrap }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The coupling path of Turbo Ring has been changed."
|
|
::= { mibNotificationsPrefix 6 }
|
|
|
|
varturboRingMasterChangedTrap OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1), -- no topology change
|
|
ringMasterChanged(2) -- ring master changed
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The master of Turbo Ring has been changed."
|
|
::= { swTraps 7 }
|
|
|
|
turboRingMasterChangedTrap NOTIFICATION-TYPE
|
|
OBJECTS { varturboRingMasterChangedTrap }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The master of Turbo Ring has been changed."
|
|
::= { mibNotificationsPrefix 7 }
|
|
|
|
varturboRingMasterMismatchTrap OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1), -- no topology mismatch
|
|
ringMasterMismatch(2) -- ring master mismatch
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The master of Turbo Ring has been mismatch."
|
|
::= { swTraps 22 }
|
|
|
|
turboRingMasterMismatchTrap NOTIFICATION-TYPE
|
|
OBJECTS { varturboRingMasterChangedTrap }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The master of Turbo Ring has been mismatch."
|
|
::= { mibNotificationsPrefix 22 }
|
|
|
|
varPortLoopDetectedTrap OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DUT port is looping."
|
|
::= { swTraps 17 }
|
|
|
|
portLoopDetectedTrap NOTIFICATION-TYPE
|
|
OBJECTS { varPortLoopDetectedTrap }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DUT port is looping."
|
|
::= { mibNotificationsPrefix 17 }
|
|
|
|
varRateLimitedOnTrap OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1), -- no rate limit
|
|
rateLimitON(2), -- rate limit ON
|
|
rateLimitOFF(3) -- rate limit OFF
|
|
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DUT port is rate limit."
|
|
::= { swTraps 18 }
|
|
|
|
rateLimitedOnTrap NOTIFICATION-TYPE
|
|
OBJECTS { varRateLimitedOnTrap }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DUT port rate limit is ON."
|
|
|
|
::= { mibNotificationsPrefix 18 }
|
|
|
|
varLLDPChgTrap OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The LLDP table is changing."
|
|
::= { swTraps 19 }
|
|
|
|
lldpChgTrap NOTIFICATION-TYPE
|
|
OBJECTS { varLLDPChgTrap }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The LLDP table is changing."
|
|
::= { mibNotificationsPrefix 19 }
|
|
|
|
varABC02WarningTrap OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
noEnoughSpace(1),
|
|
nnauthorizedMediaIsDetected(2),
|
|
exportConfigurationFail(3),
|
|
exportLogFail(4),
|
|
autoImportConfigurationFail(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Warning trap while specific error is occured in abc02."
|
|
::= { swTraps 20 }
|
|
|
|
abc02WarningTrap NOTIFICATION-TYPE
|
|
OBJECTS { varABC02WarningTrap }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Warning trap while specific error is occured in abc02."
|
|
::= { mibNotificationsPrefix 20 }
|
|
|
|
varUserAuthSuccessTrap OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Account authentication success."
|
|
::= { swTraps 24 }
|
|
|
|
userAuthSuccessTrap NOTIFICATION-TYPE
|
|
OBJECTS { varUserAuthSuccessTrap }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Account authentication success."
|
|
::= { mibNotificationsPrefix 24 }
|
|
|
|
varUserAuthFailTrap OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Account authentication failed."
|
|
::= { swTraps 25 }
|
|
|
|
userAuthFailTrap NOTIFICATION-TYPE
|
|
OBJECTS { varUserAuthFailTrap }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Account authentication failed."
|
|
::= { mibNotificationsPrefix 25 }
|
|
|
|
varMacStickyPortViolationPortDisableTrap OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1), -- no violation port disable
|
|
violationPortDisable(2) -- violation port disable
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of sticky Mac address on the port was over the limit. A macStickyPortViolationPortDisableTrap will contain 3 elements: port, macaddr, and vlanid."
|
|
::= { swTraps 26 }
|
|
|
|
macStickyPortViolationPortDisableTrap NOTIFICATION-TYPE
|
|
OBJECTS { varMacStickyPortViolationPortDisableTrap }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of sticky Mac address on the port was over the limit. A macStickyPortViolationPortDisableTrap will contain 3 elements: port, macaddr, and vlanid."
|
|
::= { mibNotificationsPrefix 26 }
|
|
|
|
varFiberWarningTrap OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Warning trap while fiber is over threshold."
|
|
::= { swTraps 28 }
|
|
|
|
fiberWarningTrap NOTIFICATION-TYPE
|
|
OBJECTS { varFiberWarningTrap }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Warning trap while fiber is over threshold."
|
|
::= { mibNotificationsPrefix 28 }
|
|
|
|
varLoggingCapacityTrap OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Warning trap while event log is over capacity threshold."
|
|
::= { swTraps 29 }
|
|
|
|
loggingCapacityTrap NOTIFICATION-TYPE
|
|
OBJECTS { varLoggingCapacityTrap }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Warning trap while event log is over capacity threshold."
|
|
::= { mibNotificationsPrefix 29 }
|
|
|
|
varUserInfoChgTrap OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Account information has been changed."
|
|
::= { swTraps 31 }
|
|
|
|
userInfoChgTrap NOTIFICATION-TYPE
|
|
OBJECTS { varUserInfoChgTrap }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Account information has been changed."
|
|
::= { mibNotificationsPrefix 31 }
|
|
|
|
varConfigImportTrap OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configuration has been imported."
|
|
::= { swTraps 32 }
|
|
|
|
configImportTrap NOTIFICATION-TYPE
|
|
OBJECTS { varConfigImportTrap }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configuration has been imported."
|
|
::= { mibNotificationsPrefix 32 }
|
|
|
|
varRemoteAuthSuccessTrap OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
tacacs(1),
|
|
radius(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The login authentication is successful by the remote server"
|
|
::= { swTraps 38 }
|
|
|
|
remoteAuthSuccessTrap NOTIFICATION-TYPE
|
|
OBJECTS { varRemoteAuthSuccessTrap }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The login authentication is successful by the remote server"
|
|
::= { mibNotificationsPrefix 38 }
|
|
|
|
varRemoteAuthFailTrap OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
tacacs(1),
|
|
radius(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The login authentication is failed by the remote server"
|
|
::= { swTraps 39 }
|
|
|
|
remoteAuthFailTrap NOTIFICATION-TYPE
|
|
OBJECTS { varRemoteAuthFailTrap }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The login authentication is failed by the remote server"
|
|
::= { mibNotificationsPrefix 39 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Diagnosis: LLDP Setting
|
|
-- -------------------------------------------------------------
|
|
|
|
diagnosis OBJECT IDENTIFIER ::= { swMgmt 42 }
|
|
lldpSetting OBJECT IDENTIFIER ::= { diagnosis 1 }
|
|
|
|
|
|
enableLLDP OBJECT-TYPE
|
|
SYNTAX INTEGER {disable(0),enable(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This enable the LLDP functon."
|
|
::= { lldpSetting 1 }
|
|
|
|
|
|
lldpMSGInterval OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The LLDP message transmit interval."
|
|
::= { lldpSetting 2 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Industrial Protocol
|
|
-- -------------------------------------------------------------
|
|
|
|
industrialProtocol OBJECT IDENTIFIER ::= { swMgmt 47 }
|
|
eipSetting OBJECT IDENTIFIER ::= { industrialProtocol 1 }
|
|
modbusSetting OBJECT IDENTIFIER ::= { industrialProtocol 2 }
|
|
profinetioSetting OBJECT IDENTIFIER ::= { industrialProtocol 3 }
|
|
|
|
enableEtherNetIP OBJECT-TYPE
|
|
SYNTAX INTEGER {disable(0),enable(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This enable the EtherNet/IP functon."
|
|
::= { eipSetting 1 }
|
|
|
|
enableModbus OBJECT-TYPE
|
|
SYNTAX INTEGER {disable(0),enable(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This enable the Modbus functon."
|
|
::= { modbusSetting 1 }
|
|
|
|
enableProfinetIO OBJECT-TYPE
|
|
SYNTAX INTEGER {disable(0),enable(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This enable the PROFINET IO functon."
|
|
::= { profinetioSetting 1 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- GARP
|
|
-- -------------------------------------------------------------
|
|
|
|
garpSetting OBJECT IDENTIFIER ::= { swMgmt 45 }
|
|
|
|
|
|
leaveAllTime OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Leaveall Time (ms)."
|
|
::= { garpSetting 3 }
|
|
|
|
leaveTime OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Leave Time (ms)."
|
|
::= { garpSetting 2 }
|
|
|
|
joinTime OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Join Time (ms)."
|
|
::= { garpSetting 1 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Factory Default setting
|
|
-- -------------------------------------------------------------
|
|
|
|
enableFactoryDefault OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
activate(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Reset all EtherDevice switch settings to factory default values"
|
|
::= { swMgmt 48 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- eventlog
|
|
-- -------------------------------------------------------------
|
|
eventlog OBJECT IDENTIFIER ::= { swMgmt 46 }
|
|
|
|
eventlogTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF EventlogEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of eventlog."
|
|
::= { eventlog 1 }
|
|
|
|
eventlogEntry OBJECT-TYPE
|
|
SYNTAX EventlogEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table entry of eventlog."
|
|
INDEX { eventlogIndex }
|
|
::= { eventlogTable 1 }
|
|
|
|
EventlogEntry ::=
|
|
SEQUENCE {
|
|
eventlogIndex
|
|
INTEGER,
|
|
eventlogBootup
|
|
INTEGER,
|
|
eventlogDate
|
|
DisplayString,
|
|
eventlogTime
|
|
DisplayString,
|
|
eventlogUptime
|
|
DisplayString,
|
|
eventlogEvent
|
|
DisplayString
|
|
}
|
|
|
|
eventlogIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of eventlog entry."
|
|
::= { eventlogEntry 1 }
|
|
|
|
eventlogBootup OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The reboot count of the system."
|
|
::= { eventlogEntry 2 }
|
|
|
|
eventlogDate OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The date of the event occured."
|
|
::= { eventlogEntry 3 }
|
|
|
|
eventlogTime OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time of the event occured."
|
|
::= { eventlogEntry 4 }
|
|
|
|
eventlogUptime OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time of the event occured after booting up."
|
|
::= { eventlogEntry 5 }
|
|
|
|
eventlogEvent OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The event which occured in the system."
|
|
::= { eventlogEntry 6 }
|
|
|
|
eventlogClear OBJECT-TYPE
|
|
SYNTAX INTEGER { noop(0), clear(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To clear the eventlog, set value 1 to this field."
|
|
::= { eventlog 2 }
|
|
-- -------------------------------------------------------------
|
|
-- Access Control List
|
|
-- -------------------------------------------------------------
|
|
|
|
accessControlList OBJECT IDENTIFIER ::= { swMgmt 52 }
|
|
|
|
accessControlTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AccessControlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of ACL rule settings. This table is used to configure ACL rules."
|
|
::= { accessControlList 1 }
|
|
|
|
accessControlEntry OBJECT-TYPE
|
|
SYNTAX AccessControlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The entry information of ACL table."
|
|
INDEX { aclRuleIndex }
|
|
::= { accessControlTable 1 }
|
|
|
|
AccessControlEntry ::=
|
|
SEQUENCE {
|
|
aclRuleIndex
|
|
INTEGER,
|
|
listID
|
|
INTEGER,
|
|
filterType
|
|
INTEGER,
|
|
actionFlag
|
|
INTEGER,
|
|
srcMacAddr
|
|
MacAddress,
|
|
srcMacMask
|
|
MacAddress,
|
|
dstMacAddr
|
|
MacAddress,
|
|
dstMacMask
|
|
MacAddress,
|
|
etherType
|
|
INTEGER,
|
|
vlanID
|
|
INTEGER,
|
|
srcIpAddr
|
|
IpAddress,
|
|
srcNetmask
|
|
IpAddress,
|
|
dstIpAddr
|
|
IpAddress,
|
|
dstNetmask
|
|
IpAddress,
|
|
protocolCode
|
|
INTEGER,
|
|
srcsocketPort
|
|
INTEGER,
|
|
dstsocketPort
|
|
INTEGER,
|
|
aclStatus
|
|
INTEGER
|
|
}
|
|
|
|
aclRuleIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of the ACL rule."
|
|
::= { accessControlEntry 1 }
|
|
|
|
listID OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The listID of the ACL rule."
|
|
::= { accessControlEntry 2 }
|
|
|
|
filterType OBJECT-TYPE
|
|
SYNTAX INTEGER {ipBase(0),macBase(1)}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of the ACL filter."
|
|
::= { accessControlEntry 3 }
|
|
|
|
actionFlag OBJECT-TYPE
|
|
SYNTAX INTEGER {permit(0),deny(1)}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The action of the ACL rule."
|
|
::= { accessControlEntry 4 }
|
|
|
|
srcMacAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The source MAC address of the ACL rule."
|
|
::= { accessControlEntry 5 }
|
|
|
|
srcMacMask OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mask of the source MAC address in the ACL rule."
|
|
::= { accessControlEntry 6 }
|
|
|
|
dstMacAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination MAC address of the ACL rule."
|
|
::= { accessControlEntry 7 }
|
|
|
|
dstMacMask OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mask of the destination MAC address in the ACL rule."
|
|
::= { accessControlEntry 8 }
|
|
|
|
etherType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ether type of the ACL rule.
|
|
This setting will apply to both ARP and RARP traffic stream due to hardware platform design ! ! !
|
|
Because of hardware platform limitations, when Ether type ARP is selected the switch will not be able to filter packets by specific destination address ! ! !"
|
|
::= { accessControlEntry 9 }
|
|
|
|
vlanID OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4094)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN ID of the ACL rule."
|
|
::= { accessControlEntry 10 }
|
|
|
|
srcIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The source IP address of the ACL rule."
|
|
::= { accessControlEntry 11 }
|
|
|
|
srcNetmask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The source IP address's mask of the ACL rule."
|
|
::= { accessControlEntry 12 }
|
|
|
|
dstIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination IP address of the ACL rule"
|
|
::= { accessControlEntry 13 }
|
|
|
|
dstNetmask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination IP address's mask of the ACL rule."
|
|
::= { accessControlEntry 14 }
|
|
|
|
protocolCode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The protocol code of the ACL rule."
|
|
::= { accessControlEntry 15 }
|
|
|
|
srcsocketPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The source UDP/TCP port of the ACL rule."
|
|
::= { accessControlEntry 16 }
|
|
|
|
dstsocketPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination UDP/TCP port of the ACL rule."
|
|
::= { accessControlEntry 17 }
|
|
|
|
aclStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
active(1),
|
|
createAndGo(4),
|
|
createAndWait(5),
|
|
destroy(6)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status is active to indicate normal.
|
|
Use createAndGo to create new on multiple SET.
|
|
Use createAndWait to create new on one SET all then actvie.
|
|
Use destroy to delete this row."
|
|
::= { accessControlEntry 18 }
|
|
|
|
aclAttachmentTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AclAttachmentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of ACL attachment settings. This table is used to configure ACL attachment port and list name."
|
|
::= { accessControlList 2 }
|
|
|
|
aclAttachmentEntry OBJECT-TYPE
|
|
SYNTAX AclAttachmentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The entry information of ACL attachment table."
|
|
INDEX { aclID }
|
|
::= { aclAttachmentTable 1 }
|
|
|
|
AclAttachmentEntry ::=
|
|
SEQUENCE {
|
|
aclID
|
|
INTEGER,
|
|
ingressPort
|
|
PortList,
|
|
aclListName
|
|
DisplayString
|
|
|
|
}
|
|
|
|
aclID OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The listID of the ACL attachment entry."
|
|
::= { aclAttachmentEntry 1 }
|
|
|
|
ingressPort OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ingress ports of the ACL attachment entry."
|
|
::= { aclAttachmentEntry 2 }
|
|
|
|
aclListName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ACL entry name."
|
|
::= { aclAttachmentEntry 4 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- CPU Loading and Free Memory info.
|
|
-- -------------------------------------------------------------
|
|
cpuLoading5s OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CPU Loading for the past 5 seconds in %."
|
|
::= { swMgmt 53 }
|
|
|
|
cpuLoading30s OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CPU Loading for the past 30 seconds in %."
|
|
::= { swMgmt 54 }
|
|
|
|
cpuLoading300s OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CPU Loading for the past 5 minutes in %."
|
|
::= { swMgmt 55 }
|
|
|
|
totalMemory OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total size of System RAM."
|
|
::= { swMgmt 56 }
|
|
|
|
freeMemory OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total size of free dynamic memory"
|
|
::= { swMgmt 57 }
|
|
|
|
usedMemory OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total size of used dynamic memory"
|
|
::= { swMgmt 58 }
|
|
|
|
memoryUsage OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The usage of memory size in %."
|
|
::= { swMgmt 59 }
|
|
|
|
ivlSwitch OBJECT-TYPE
|
|
SYNTAX INTEGER {svl(0),ivl(1)}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current switch runs IVL(Independent Vlan Learning) or SVL(Shared Vlan Learning)"
|
|
::= { swMgmt 76 }
|
|
|
|
supportMacSticky OBJECT-TYPE
|
|
SYNTAX INTEGER {not-support(0), support(1)}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Support MAC Sticky feature or not."
|
|
::= { swMgmt 77 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Loop Protection info.
|
|
-- -------------------------------------------------------------
|
|
loopProtection OBJECT-TYPE
|
|
SYNTAX INTEGER {disable(0),enable(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This enable the Loop Protection functon."
|
|
::= { swMgmt 61 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- event settings
|
|
-- -------------------------------------------------------------
|
|
|
|
eventSettings OBJECT IDENTIFIER ::= { swMgmt 62 }
|
|
|
|
-- System Event Settings
|
|
|
|
systemEventSettingsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SystemEventSettingsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The system event settings table."
|
|
::= { eventSettings 1 }
|
|
|
|
systemEventSettingsEntry OBJECT-TYPE
|
|
SYNTAX SystemEventSettingsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"System Event Settings Entry."
|
|
INDEX { systemEventIndex }
|
|
::= { systemEventSettingsTable 1 }
|
|
|
|
SystemEventSettingsEntry ::=
|
|
SEQUENCE {
|
|
systemEventIndex
|
|
INTEGER,
|
|
systemEventActive
|
|
INTEGER,
|
|
systemEventName
|
|
DisplayString,
|
|
systemEventSupport
|
|
INTEGER,
|
|
systemEventModuleEnable
|
|
INTEGER,
|
|
systemEventSeverity
|
|
INTEGER
|
|
}
|
|
|
|
systemEventIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index of system event settings"
|
|
::= { systemEventSettingsEntry 1 }
|
|
|
|
systemEventActive OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
inactive(0),
|
|
active(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Status of active of system event settings"
|
|
::= { systemEventSettingsEntry 2 }
|
|
|
|
|
|
systemEventName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Name of system event settings"
|
|
::= { systemEventSettingsEntry 3 }
|
|
|
|
systemEventSupport OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
support-SNMPTrap-only(1),
|
|
support-Email-only(2),
|
|
support-SNMP-Trap-Email(3),
|
|
support-Syslog-only(4),
|
|
support-SNMPTrap-Syslog(5),
|
|
support-Email-Syslog(6),
|
|
support-SNMPTrap-Email-Syslog(7),
|
|
support-Relay1-only(8),
|
|
support-SNMPTrap-Relay1(9),
|
|
support-Email-Relay1(10),
|
|
support-SNMPTrap-Email-Relay1(11),
|
|
support-Syslog-Relay1(12),
|
|
support-SNMPTrap-Syslog-Relay1(13),
|
|
support-Email-Syslog-Relay1(14),
|
|
support-SNMPTrap-Email-Syslog-Relay1(15),
|
|
support-Relay2-only(16),
|
|
support-SNMPTrap-Relay2(17),
|
|
support-Email-Relay2(18),
|
|
support-SNMPTrap-Email-Relay2(19),
|
|
support-Syslog-Relay2(20),
|
|
support-SNMPTrap-Syslog-Relay2(21),
|
|
support-Email-Syslog-Relay2(22),
|
|
support-SNMPTrap-Email-Syslog-Relay2(23),
|
|
support-Relay1-Relay2(24),
|
|
support-SNMPTrap-Relay1-Relay2(25),
|
|
support-Syslog-Relay1-Relay2(28),
|
|
support-Email-Syslog-Relay1-Relay2(30),
|
|
support-all-SNMPTrap-Email-Syslog-Relay1-Relay2(31)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Status of support modules of system event settings."
|
|
::= { systemEventSettingsEntry 4 }
|
|
|
|
systemEventModuleEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
enable-SNMPTrap-only(1),
|
|
enable-Email-only(2),
|
|
enable-SNMPTrap-Email(3),
|
|
enable-Syslog-only(4),
|
|
enable-SNMPTrap-Syslog(5),
|
|
enable-Email-Syslog(6),
|
|
enable-SNMPTrap-Email-Syslog(7),
|
|
enable-Relay1-only(8),
|
|
enable-SNMPTrap-Relay1(9),
|
|
enable-Email-Relay1(10),
|
|
enable-SNMPTrap-Email-Relay1(11),
|
|
enable-Syslog-Relay1(12),
|
|
enable-SNMPTrap-Syslog-Relay1(13),
|
|
enable-Email-Syslog-Relay1(14),
|
|
enable-SNMPTrap-Email-Syslog-Relay1(15),
|
|
enable-Relay2-only(16),
|
|
enable-SNMPTrap-Relay2(17),
|
|
enable-Email-Relay2(18),
|
|
enable-SNMPTrap-Email-Relay2(19),
|
|
enable-Syslog-Relay2(20),
|
|
enable-SNMPTrap-Syslog-Relay2(21),
|
|
enable-Email-Syslog-Relay2(22),
|
|
enable-SNMPTrap-Email-Syslog-Relay2(23),
|
|
enable-Relay1-Relay2(24),
|
|
enable-SNMPTrap-Relay1-Relay2(25),
|
|
enable-Syslog-Relay1-Relay2(28),
|
|
enable-Email-Syslog-Relay1-Relay2(30),
|
|
enable-All-SNMPTrap-Email-Syslog-Relay1-Relay2(31)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Status of enable of system event settings."
|
|
::= { systemEventSettingsEntry 5 }
|
|
|
|
systemEventSeverity OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
emergency(0),
|
|
alert(1),
|
|
critical(2),
|
|
error(3),
|
|
warning(4),
|
|
notice(5),
|
|
information(6),
|
|
debug(7)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Severity of system event settings"
|
|
::= { systemEventSettingsEntry 6 }
|
|
|
|
-- Port Event Settings
|
|
|
|
portEventSettingsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PortEventSettingsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port event settings table."
|
|
::= { eventSettings 2 }
|
|
|
|
portEventSettingsEntry OBJECT-TYPE
|
|
SYNTAX PortEventSettingsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Port Event Settings Entry."
|
|
INDEX { portEventIndex }
|
|
::= { portEventSettingsTable 1 }
|
|
|
|
PortEventSettingsEntry ::=
|
|
SEQUENCE {
|
|
portEventIndex
|
|
INTEGER,
|
|
portEventLabel
|
|
DisplayString,
|
|
portEventActive
|
|
INTEGER,
|
|
portEventEnable
|
|
INTEGER,
|
|
portEventTrafficThreshold
|
|
INTEGER,
|
|
portEventTrafficDuration
|
|
INTEGER,
|
|
portEventModuleEnable
|
|
INTEGER,
|
|
portEventSeverity
|
|
INTEGER
|
|
}
|
|
|
|
portEventIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index of port event settings"
|
|
::= { portEventSettingsEntry 1 }
|
|
|
|
portEventLabel OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Label of portEventIndex"
|
|
::= { portEventSettingsEntry 2 }
|
|
|
|
portEventActive OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
inactive(0),
|
|
active(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Status of active of port event settings"
|
|
::= { portEventSettingsEntry 3 }
|
|
|
|
portEventEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
enable-LinkOn-only(1),
|
|
enable-LinkOff-only(2),
|
|
enable-LinkOn-LinkOff(3),
|
|
enable-TrafficOverload-only(4),
|
|
enable-LinkOn-TrafficOverload(5),
|
|
enable-LinkOff-TrafficOverload(6),
|
|
enable-All-LinkOn-LinkOff-TrafficOverload(7)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Status of event enable of port event settings"
|
|
::= { portEventSettingsEntry 4 }
|
|
|
|
portEventTrafficThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER (0..100)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Threshold of Traffic-Overload in percentage(%)"
|
|
::= { portEventSettingsEntry 5 }
|
|
|
|
portEventTrafficDuration OBJECT-TYPE
|
|
SYNTAX INTEGER (1..300)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Duration of Traffic-Overload in secs(s)"
|
|
::= { portEventSettingsEntry 6 }
|
|
|
|
portEventModuleEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
enable-SNMPTrap-only(1),
|
|
enable-Email-only(2),
|
|
enable-SNMPTrap-Email(3),
|
|
enable-Syslog-only(4),
|
|
enable-SNMPTrap-Syslog(5),
|
|
enable-Email-Syslog(6),
|
|
enable-SNMPTrap-Email-Syslog(7),
|
|
enable-Relay1-only(8),
|
|
enable-SNMPTrap-Relay1(9),
|
|
enable-Email-Relay1(10),
|
|
enable-SNMPTrap-Email-Relay1(11),
|
|
enable-Syslog-Relay1(12),
|
|
enable-SNMPTrap-Syslog-Relay1(13),
|
|
enable-Email-Syslog-Relay1(14),
|
|
enable-SNMPTrap-Email-Syslog-Relay1(15),
|
|
enable-Relay2-only(16),
|
|
enable-SNMPTrap-Relay2(17),
|
|
enable-Email-Relay2(18),
|
|
enable-SNMPTrap-Email-Relay2(19),
|
|
enable-Syslog-Relay2(20),
|
|
enable-SNMPTrap-Syslog-Relay2(21),
|
|
enable-Email-Syslog-Relay2(22),
|
|
enable-SNMPTrap-Email-Syslog-Relay2(23),
|
|
enable-Relay1-Relay2(24),
|
|
enable-SNMPTrap-Relay1-Relay2(25),
|
|
enable-Syslog-Relay1-Relay2(28),
|
|
enable-Email-Syslog-Relay1-Relay2(30),
|
|
enable-All-SNMPTrap-Email-Syslog-Relay1-Relay2(31)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Status of module enable of port event settings."
|
|
::= { portEventSettingsEntry 7 }
|
|
|
|
portEventSeverity OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
emergency(0),
|
|
alert(1),
|
|
critical(2),
|
|
error(3),
|
|
warning(4),
|
|
notice(5),
|
|
information(6),
|
|
debug(7)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Severity of port event settings"
|
|
::= { portEventSettingsEntry 8 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Management Interface
|
|
-- -------------------------------------------------------------
|
|
|
|
managementInterface OBJECT IDENTIFIER ::= { swMgmt 63 }
|
|
|
|
httpEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Status of http service"
|
|
::= { managementInterface 1 }
|
|
|
|
httpPort OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Port of http service"
|
|
::= { managementInterface 2 }
|
|
|
|
sslEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Status of ssl(https) service"
|
|
::= { managementInterface 3 }
|
|
|
|
sslPort OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Port of ssl(https) service"
|
|
::= { managementInterface 4 }
|
|
|
|
telnetEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Status of telnet service"
|
|
::= { managementInterface 5 }
|
|
|
|
telnetPort OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Port of telnet service"
|
|
::= { managementInterface 6 }
|
|
|
|
sshEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Status of ssh service"
|
|
::= { managementInterface 7 }
|
|
|
|
sshPort OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Port of telnet service"
|
|
::= { managementInterface 8 }
|
|
|
|
mgmtInterfaceAutoLogout OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1440)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Web Timeout (Mins). Set 0 to disable"
|
|
::= { managementInterface 9 }
|
|
|
|
snmpdEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Status of snmp agent"
|
|
::= { managementInterface 10 }
|
|
|
|
snmpdPort OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Port of snmp agent"
|
|
::= { managementInterface 11 }
|
|
|
|
moxaUtilityServiceEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Status of moxa utility service"
|
|
::= { managementInterface 12 }
|
|
|
|
moxaUtilityServicePort OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Port of moxa utility service"
|
|
::= { managementInterface 13 }
|
|
|
|
httpMaxLoginUsers OBJECT-TYPE
|
|
SYNTAX INTEGER (1..10)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure HTTP/HTTPS maximum login users"
|
|
::= { managementInterface 14 }
|
|
|
|
telnetMaxLoginUsers OBJECT-TYPE
|
|
SYNTAX INTEGER (1..5)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure TELNET/SSH maximum login users"
|
|
::= { managementInterface 15 }
|
|
|
|
moxaNewCmdEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Status of new moxa utility service"
|
|
::= { managementInterface 16 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Password Policy.
|
|
-- -------------------------------------------------------------
|
|
|
|
passwordPolicy OBJECT IDENTIFIER ::= { swMgmt 70 }
|
|
|
|
pwdMinLength OBJECT-TYPE
|
|
SYNTAX INTEGER (4..16)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure the minimum password length."
|
|
::= { passwordPolicy 1 }
|
|
|
|
pwdComplexityCheckEnable OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable password complexity check."
|
|
::= { passwordPolicy 2 }
|
|
|
|
pwdComplexityCheckDigitEnable OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Add password complexity check with digit."
|
|
::= { passwordPolicy 3 }
|
|
|
|
pwdComplexityCheckAlphabetEnable OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Add password complexity check with alphabet."
|
|
::= { passwordPolicy 4 }
|
|
|
|
pwdComplexityCheckSpecialCharEnable OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Add password complexity check with special-characters."
|
|
::= { passwordPolicy 5 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Login Lockout.
|
|
-- -------------------------------------------------------------
|
|
|
|
loginLockout OBJECT IDENTIFIER ::= { swMgmt 71 }
|
|
|
|
loginFailureLockoutEnable OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable login failure lockout."
|
|
::= { loginLockout 1 }
|
|
|
|
loginFailureLockoutRetrys OBJECT-TYPE
|
|
SYNTAX INTEGER (1..10)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure login failure lockout retry threshhold."
|
|
::= { loginLockout 2 }
|
|
|
|
loginFailureLockoutTime OBJECT-TYPE
|
|
SYNTAX INTEGER (1..60)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure login failure lockout time.(Min)"
|
|
::= { loginLockout 3 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- System Notification Message.
|
|
-- -------------------------------------------------------------
|
|
|
|
systemNotifyMessage OBJECT IDENTIFIER ::= { swMgmt 72 }
|
|
|
|
httpLoginMessage OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure HTTP/HTTPS login message."
|
|
::= { systemNotifyMessage 1 }
|
|
|
|
httpLoginFailureMessage OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure HTTP/HTTPS login failure message."
|
|
::= { systemNotifyMessage 2 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Audit and Log Management.
|
|
-- -------------------------------------------------------------
|
|
|
|
syslogManagement OBJECT IDENTIFIER ::= { swMgmt 73 }
|
|
|
|
loggingCapacityThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER (0..100)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure event log capacity warning threshold."
|
|
::= { syslogManagement 1 }
|
|
|
|
loggingCapacityTrapWarningEnable OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable event log capacity SNMP trap warning."
|
|
::= { syslogManagement 2 }
|
|
|
|
loggingCapacityEmailWarningEnable OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable event log capacity email warning."
|
|
::= { syslogManagement 3 }
|
|
|
|
loggingOversizeAction OBJECT-TYPE
|
|
SYNTAX INTEGER { overwrite(0), stoprecord(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set event log over-size action."
|
|
::= { syslogManagement 4 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Certificate Management.
|
|
-- -------------------------------------------------------------
|
|
|
|
certificateManagement OBJECT IDENTIFIER ::= { swMgmt 74 }
|
|
|
|
sslCertGen OBJECT-TYPE
|
|
SYNTAX INTEGER { na(0), generate(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Generate SSL certificate."
|
|
::= { certificateManagement 1 }
|
|
|
|
sshKeyGen OBJECT-TYPE
|
|
SYNTAX INTEGER { na(0), generate(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Generate SSH host key."
|
|
::= { certificateManagement 2 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Switch Locator LED.
|
|
-- -------------------------------------------------------------
|
|
|
|
switchLocator OBJECT IDENTIFIER ::= { swMgmt 64 }
|
|
|
|
blinkingLocatorLED OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
off(0),
|
|
on(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Blinking switch locator LED."
|
|
::= { switchLocator 1 }
|
|
|
|
disableLocatorLEDTime OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure back-off time for disable switch locator LED."
|
|
::= { switchLocator 2 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- New Web UI info.
|
|
-- -------------------------------------------------------------
|
|
uiVersion OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"New UI Version"
|
|
::= { swMgmt 65 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Serial Number info.
|
|
-- -------------------------------------------------------------
|
|
serialNumber OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Serial Number"
|
|
::= { swMgmt 78 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Configuration File Encryption Setting.
|
|
-- -------------------------------------------------------------
|
|
configEncryptEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {disable(0),enable(1)}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configuration File Encryption Setting."
|
|
::= { swMgmt 79 }
|
|
|
|
END
|
|
|
|
|