david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
Files
98a672123c7872f6b9b75a9a2b6bb3aea504de6a
mibs/MIBS/moxa/MOXA-EDSP506E-MIB
David Leutgeb 98a672123c Initial commit
2023-12-05 12:25:34 +01:00

6707 lines
201 KiB
Plaintext
Raw Blame History

-- *****************************************************************
-- Moxa EtherDevice Switch EDSP506E MIB
--
-- Copyright (c) 2017 by Moxa Inc.
-- All rights reserved.
-- *****************************************************************
MOXA-EDSP506E-MIB DEFINITIONS ::= BEGIN
IMPORTS
enterprises, MODULE-IDENTITY, NOTIFICATION-TYPE, IpAddress, OBJECT-TYPE
FROM SNMPv2-SMI
DateAndTime, TEXTUAL-CONVENTION, MacAddress, DisplayString
FROM SNMPv2-TC;
moxa OBJECT IDENTIFIER ::= { enterprises 8691 } -- 1.3.6.1.4.1.8691
industrialEthernet OBJECT IDENTIFIER ::= { moxa 7 } -- 1.3.6.1.4.1.8691.7
edsp506e MODULE-IDENTITY
LAST-UPDATED "201704010000Z"
ORGANIZATION "Moxa Inc."
CONTACT-INFO
"Postal: Moxa Inc.
Fl.4, No.135,Lane 235,Pao-Chiao Rd.
Shing Tien City,Taipei,Taiwan,R.O.C
Tel: +866-2-89191230 "
DESCRIPTION
"The MIB module for Moxa EDS-P506E series specific information."
REVISION "201704010000Z"
DESCRIPTION
"Support v5.3 firmware, Standard Release
Added new objects:
N/A
Modified objects:
N/A"
::= { industrialEthernet 162 } -- 1.3.6.1.4.1.8691.7.162
-- {enterprises moxa(8691) industrialEthernet7 162 }
-- -------------------------------------------------------------
-- groups in the MOXA-EDSP506E MIB
-- -------------------------------------------------------------
swMgmt OBJECT IDENTIFIER ::= { edsp506e 1 } -- 1.3.6.1.4.1.8691.7.162.1
swTraps OBJECT IDENTIFIER ::= { edsp506e 2 } -- 1.3.6.1.4.1.8691.7.162.2
-- -------------------------------------------------------------
-- Textual Conventions
-- -------------------------------------------------------------
PortList ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Each octet within this value specifies a set of eight
ports, with the first octet specifying ports 1 through
8, the second octet specifying ports 9 through 16, etc.
Within each octet, the most significant bit represents
the lowest numbered port, and the least significant bit
represents the highest numbered port. Thus, each port
of the bridge is represented by a single bit within the
value of this object. If that bit has a value of '1'
then that port is included in the set of ports; the port
is not included if its bit has a value of '0'."
SYNTAX OCTET STRING
-- -------------------------------------------------------------
-- swMgmt group
-- -------------------------------------------------------------
numberOfPorts OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total Ports."
::= { swMgmt 1 }
switchModel OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The switch model."
::= { swMgmt 2 }
firmwareVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The firmware version."
::= { swMgmt 4 }
enableWebConfig OBJECT-TYPE
SYNTAX INTEGER { disable(0), httpOrHttps(1), httpsOnly(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This enable the Web. configuration function."
::= { swMgmt 5 }
consoleLoginMode OBJECT-TYPE
SYNTAX INTEGER { menu(0), cli(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This option can change console login mode."
::= { swMgmt 51 }
enableTelnetConsole OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This enable telnet console."
::= { swMgmt 6 }
lineSwapRecovery OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This enable line-swap-fast-recovery function."
::= { swMgmt 7 }
agingTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Web Timeout"
::= { swMgmt 44 }
supportIfXTable OBJECT-TYPE
SYNTAX INTEGER { no(0), yes(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Support 64 bit Counter (ifXTable)."
::= { swMgmt 69 }
-- -------------------------------------------------------------
-- network settings
-- -------------------------------------------------------------
networkSetting OBJECT IDENTIFIER ::= { swMgmt 8 }
switchIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP Address of this switch."
::= { networkSetting 1 }
switchIpMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The netmask of this switch."
::= { networkSetting 2 }
defaultGateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The default gateway of this switch."
::= { networkSetting 3 }
enableAutoIpConfig OBJECT-TYPE
SYNTAX INTEGER { disable(0), enableDHCP(1),enableBOOTP(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This enable the automatic IP address configuration function."
::= { networkSetting 4 }
dnsServer1IpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The first DNS server's IP address"
::= { networkSetting 5 }
snmpTrapCommunity OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The SNMP trap community name"
::= { networkSetting 6 }
trapServerAddr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address/Domain name of SNMP trap server"
::= { networkSetting 7 }
dnsServer2IpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The second DNS server's IP address"
::= { networkSetting 8 }
snmpReadCommunity OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The SNMP read community name"
::= { networkSetting 9 }
snmpTrap2Community OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Second SNMP trap community name"
::= { networkSetting 11 }
trap2ServerAddr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address/Domain name of Second SNMP trap server"
::= { networkSetting 12 }
snmpInformEnable OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This enable the snmpInform function."
::= { networkSetting 13 }
snmpInformRetries OBJECT-TYPE
SYNTAX INTEGER (1..99)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The snmp inform retry times of SNMP trap server"
::= { networkSetting 14 }
snmpInformTimeout OBJECT-TYPE
SYNTAX INTEGER (1..300)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The snmp inform interval of SNMP trap server"
::= { networkSetting 15 }
dhcpRetryPeriods OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The DHCP retry periods."
::= { networkSetting 16 }
dhcpRetryTimes OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The dhcp retry times."
::= { networkSetting 17 }
trapVersion OBJECT-TYPE
SYNTAX INTEGER {
snmpv1-Trap(0),
snmpv2-Notification(1),
snmpv2-Inform(2),
snmpv3-Trap(3),
snmpv3-Inform(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Version of SNMP trap"
::= { networkSetting 18 }
snmpVersion OBJECT-TYPE
SYNTAX INTEGER {
snmpv1-v2c-v3 (1),
snmpv1-v2c (2),
snmpv3 (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Version of SNMP"
::= { networkSetting 21 }
snmpAdminSecurityLevel OBJECT-TYPE
SYNTAX INTEGER {
noAuthNoPriv (1),
authNoPriv (2),
authPriv (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Admin security level"
::= { networkSetting 22 }
snmpUserSecurityLevel OBJECT-TYPE
SYNTAX INTEGER {
noAuthNoPriv (1),
authNoPriv (2),
authPriv (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"User security level"
::= { networkSetting 23 }
-- -------------------------------------------------------------
-- port settings
-- -------------------------------------------------------------
portSetting OBJECT IDENTIFIER ::= { swMgmt 9 }
portTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port table."
::= { portSetting 1 }
portEntry OBJECT-TYPE
SYNTAX PortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port entry."
INDEX { portIndex }
::= { portTable 1 }
PortEntry ::=
SEQUENCE {
portIndex
INTEGER,
portDesc
DisplayString,
portEnable
INTEGER,
portSpeed
INTEGER,
portMDI
INTEGER,
portFDXFlowCtrl
INTEGER,
portName
DisplayString,
portSubdesc
DisplayString
}
portIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port index."
::= { portEntry 1 }
portDesc OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port description"
::= { portEntry 2 }
portEnable OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This enable the port."
::= { portEntry 3 }
portSpeed OBJECT-TYPE
SYNTAX INTEGER {
auto(0),
speed100M-Full(1),
speed100M-Half(2),
speed10M-Full(3),
speed10M-Half(4),
speed1000M-Full(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port speed and duplex."
::= { portEntry 4 }
portMDI OBJECT-TYPE
SYNTAX INTEGER
{
na(0),
auto(1),
mdi(2),
mdiX(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port MDI/MDIX."
::= { portEntry 5 }
portFDXFlowCtrl OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port FDX Flow Control"
::= { portEntry 6 }
portName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port Name"
::= { portEntry 7 }
portSubdesc OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port second description"
::= { portEntry 8 }
-- -------------------------------------------------------------
-- monitor
-- -------------------------------------------------------------
monitor OBJECT IDENTIFIER ::= { swMgmt 10 }
power1InputStatus OBJECT-TYPE
SYNTAX INTEGER { not-present(0), present(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the first power input."
::= { monitor 1 }
power2InputStatus OBJECT-TYPE
SYNTAX INTEGER { not-present(0), present(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the second power input."
::= { monitor 2 }
monitorPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF MonitorPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port table of monitor function."
::= { monitor 3 }
monitorPortEntry OBJECT-TYPE
SYNTAX MonitorPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port table entry of monitor function."
INDEX { portIndex }
::= { monitorPortTable 1 }
MonitorPortEntry ::=
SEQUENCE {
monitorLinkStatus
INTEGER,
monitorSpeed
INTEGER,
monitorAutoMDI
INTEGER,
monitorTraffic
INTEGER,
monitorFDXFlowCtrl
INTEGER,
monitorTxTraffic
INTEGER,
monitorRxTraffic
INTEGER
}
monitorLinkStatus OBJECT-TYPE
SYNTAX INTEGER { disable(-1), off(0), on(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port link status."
::= { monitorPortEntry 2}
monitorSpeed OBJECT-TYPE
SYNTAX INTEGER
{
speed1000M-Full(5),
speed1000M-Half(4),
speed100M-Full(3),
speed100M-Half(2),
speed10M-Full(1),
speed10M-Half(0),
na(-1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port speed and duplex status."
::= { monitorPortEntry 3 }
monitorAutoMDI OBJECT-TYPE
SYNTAX INTEGER
{
auto(2),
mdix(1),
mdi(0),
na(-1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port MDI/MDIX status."
::= { monitorPortEntry 4 }
monitorTraffic OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The trafic loading percentage of port."
::= { monitorPortEntry 5 }
monitorFDXFlowCtrl OBJECT-TYPE
SYNTAX INTEGER { off(0),on(1)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Full-Duplex flow control status"
::= { monitorPortEntry 6 }
monitorTxTraffic OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The TX traffic loading percentage of port."
::= { monitorPortEntry 7 }
monitorRxTraffic OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The RTX traffic loading percentage of port."
::= { monitorPortEntry 8 }
monitorDiTable OBJECT-TYPE
SYNTAX SEQUENCE OF MonitorDiEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The DI table of monitor function."
::= { monitor 4 }
monitorDiEntry OBJECT-TYPE
SYNTAX MonitorDiEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The DI table entry of monitor function."
INDEX { diIndex }
::= { monitorDiTable 1 }
MonitorDiEntry ::=
SEQUENCE {
diIndex
INTEGER,
diInputStatus
INTEGER
}
diIndex OBJECT-TYPE
SYNTAX INTEGER (1..2)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The DI index of monitor function"
::= { monitorDiEntry 1 }
diInputStatus OBJECT-TYPE
SYNTAX INTEGER { off(0), on(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The DI input status."
::= { monitorDiEntry 2 }
-- -------------------------------------------------------------
-- Monitor Fiber Check Informations
-- -------------------------------------------------------------
monitorFiberCheckTable OBJECT-TYPE
SYNTAX SEQUENCE OF MonitorFiberCheckEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Fiber Check table of monitor function."
::= { monitor 11 }
monitorFiberCheckEntry OBJECT-TYPE
SYNTAX MonitorFiberCheckEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The fiber check table entry of monitor function."
INDEX { portIndex }
::= { monitorFiberCheckTable 1 }
MonitorFiberCheckEntry ::=
SEQUENCE {
fiberPort
DisplayString,
fiberModelName
DisplayString,
fiberWaveLength
DisplayString,
fiberVoltage
DisplayString,
fiberTemperature
DisplayString,
fiberTempWarn
DisplayString,
fiberTxPower
DisplayString,
fiberTxPowerWarn
DisplayString,
fiberRxPower
DisplayString,
fiberRxPowerWarn
DisplayString,
fiberSN
DisplayString
}
fiberPort OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The fiber index of monitor function"
::= { monitorFiberCheckEntry 1 }
fiberModelName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The fiber ModelName of monitor function"
::= { monitorFiberCheckEntry 2 }
fiberWaveLength OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The fiber wavelength"
::= { monitorFiberCheckEntry 3 }
fiberVoltage OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The fiber Voltage of monitor function"
::= { monitorFiberCheckEntry 4 }
fiberTemperature OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The fiber Temperature of monitor function"
::= { monitorFiberCheckEntry 5 }
fiberTempWarn OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Fiber Temperature warning value of monitor function"
::= { monitorFiberCheckEntry 6 }
fiberTxPower OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The fiber TX power of monitor function"
::= { monitorFiberCheckEntry 7 }
fiberTxPowerWarn OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The fiber TX power warning value of monitor function"
::= { monitorFiberCheckEntry 8 }
fiberRxPower OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The fiber RX power of monitor function"
::= { monitorFiberCheckEntry 9 }
fiberRxPowerWarn OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Fiber RX power warning value of monitor function"
::= { monitorFiberCheckEntry 10 }
fiberSN OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The fiber serial number"
::= { monitorFiberCheckEntry 13 }
monitorPoEEPSTable OBJECT-TYPE
SYNTAX SEQUENCE OF MonitorPoEEPSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Status of PoE EPS"
::= { monitor 12 }
monitorPoEEPSEntry OBJECT-TYPE
SYNTAX MonitorPoEEPSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Status of PoE EPS Entry"
INDEX { epsIndex }
::= { monitorPoEEPSTable 1 }
MonitorPoEEPSEntry ::=
SEQUENCE {
epsIndex
INTEGER,
epsState
INTEGER
}
epsIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of PoE EPS"
::= { monitorPoEEPSEntry 1 }
epsState OBJECT-TYPE
SYNTAX INTEGER { not-present(0), present(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of PoE EPS"
::= { monitorPoEEPSEntry 2 }
-- -------------------------------------------------------------
-- power consumption
-- -------------------------------------------------------------
powerConsumption OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current power comsuption(Watts). Accurate to second decimal place."
::= { monitor 8 }
-- -------------------------------------------------------------
-- email warning
-- -------------------------------------------------------------
emailWarning OBJECT IDENTIFIER ::= { swMgmt 11 }
emailService OBJECT IDENTIFIER ::= { emailWarning 1 }
emailWarningSMTPServer OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The SMTP server's Ip Address/Domain name of email warning function."
::= { emailService 1 }
emailWarningFirstRecipientEmailAddr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The first recipient email address of email warning function."
::= { emailService 2 }
emailWarningSecondRecipientEmailAddr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The second recipient email address of email warning function."
::= { emailService 3 }
emailWarningThirdRecipientEmailAddr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The third recipient email address of email warning function."
::= { emailService 4 }
emailWarningFourthRecipientEmailAddr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The fourth recipient email address of email warning function."
::= { emailService 5 }
emailWarningSMTPPort OBJECT-TYPE
SYNTAX INTEGER (1..65536)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The SMTP server's port of email warning function."
::= { emailService 6 }
emailWarningSMTPUser OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The registered user account for SMTP service of email warning function."
::= { emailService 7 }
emailWarningSMTPPassword OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The registered user password for SMTP service of email warning function."
::= { emailService 8 }
emailWarningSMTPTLS OBJECT-TYPE
SYNTAX INTEGER { no(0), yes(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The SMTP server use TLS of email warning function."
::= { emailService 9 }
emailWarningSMTPAuthMethod OBJECT-TYPE
SYNTAX INTEGER { plain(0), login(1), cram-md5(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The SMTP server use login method of email warning function."
::= { emailService 10 }
emailWarningSenderEmailAddr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The sender email address of email warning function."
::= { emailService 11 }
-- -------------------------------------------------------------
-- set device ip
-- -------------------------------------------------------------
setDeviceIp OBJECT IDENTIFIER ::= { swMgmt 12 }
setDevIpTable OBJECT-TYPE
SYNTAX SEQUENCE OF SetDevIpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The set devvice IP table."
::= { setDeviceIp 1 }
setDevIpEntry OBJECT-TYPE
SYNTAX SetDevIpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The set devvice IP table entry."
INDEX { setDevIpIndex }
::= { setDevIpTable 1 }
SetDevIpEntry ::=
SEQUENCE {
setDevIpIndex
INTEGER,
setDevIpCurrentIpofDevice
DisplayString,
setDevIpPresentBy
INTEGER,
setDevIpDedicatedIp
IpAddress
}
setDevIpIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The set devvice IP index."
::= { setDevIpEntry 1 }
setDevIpCurrentIpofDevice OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current IP address of connected to this port."
::= { setDevIpEntry 2 }
setDevIpPresentBy OBJECT-TYPE
SYNTAX INTEGER
{
no(0),
dhcpClient(1),
rarp(2),
bootp(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The protocol used that assigning IP to the device."
::= { setDevIpEntry 3 }
setDevIpDedicatedIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address when assign to the device connected to this port."
::= { setDevIpEntry 4 }
-- -------------------------------------------------------------
-- port mirror
-- -------------------------------------------------------------
mirroring OBJECT IDENTIFIER ::= { swMgmt 13 }
targetPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The mirrored port of mirroring function."
::= { mirroring 1 }
mirroringPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The mirroring port of mirroring function."
::= { mirroring 2 }
monitorDirection OBJECT-TYPE
SYNTAX INTEGER
{
inputDataStream(0),
outputDataStream(1),
biDirectional(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The traffic direction of mirroring function."
::= { mirroring 3 }
-- -------------------------------------------------------------
-- port trunking
-- -------------------------------------------------------------
portTrunking OBJECT IDENTIFIER ::= { swMgmt 14 }
-- trunk setting table
trunkSettingTable OBJECT-TYPE
SYNTAX SEQUENCE OF TrunkSettingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Port Trunking Setting Table."
::= { portTrunking 1 }
trunkSettingEntry OBJECT-TYPE
SYNTAX TrunkSettingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Port Trunking Setting Entry."
INDEX { trunkSettingIndex }
::= { trunkSettingTable 1 }
TrunkSettingEntry ::=
SEQUENCE {
trunkSettingIndex
INTEGER,
trunkType
INTEGER,
trunkMemberPorts
PortList
}
trunkSettingIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Trunking Group Index."
::= { trunkSettingEntry 1 }
trunkType OBJECT-TYPE
SYNTAX INTEGER {
static(1),
lacp(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Trunking Group Type."
::= { trunkSettingEntry 2 }
trunkMemberPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Trunking Group Member Ports."
::= { trunkSettingEntry 3 }
-- trunk table
trunkTable OBJECT-TYPE
SYNTAX SEQUENCE OF TrunkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Port Trunking Table."
::= { portTrunking 2 }
trunkEntry OBJECT-TYPE
SYNTAX TrunkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Port Trunking Entry."
INDEX { trunkIndex, trunkPort }
::= { trunkTable 1 }
TrunkEntry ::=
SEQUENCE {
trunkIndex
INTEGER,
trunkPort
INTEGER,
trunkStatus
INTEGER
}
trunkIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Trunking Group Index."
::= { trunkEntry 1 }
trunkPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Trunking Group Member Port."
::= { trunkEntry 2 }
trunkStatus OBJECT-TYPE
SYNTAX INTEGER {
success(1),
fail(2),
standby(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Trunking Port Status."
::= { trunkEntry 3 }
-- -------------------------------------------------------------
-- communication redundancy
-- -------------------------------------------------------------
commRedundancy OBJECT IDENTIFIER ::= { swMgmt 16 }
protocolOfRedundancySetup OBJECT-TYPE
SYNTAX INTEGER { spanningTree(1), turboRing(2), turboRingV2(3), turboChain(4), mstp(5)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This set the redundancy protocol of this switch. "
::= { commRedundancy 1 }
turboRing OBJECT IDENTIFIER ::= { commRedundancy 2}
turboRingMaster OBJECT-TYPE
SYNTAX INTEGER { no(0), yes(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Is this a Master or Slave."
::= { turboRing 1 }
turboRingMasterSetup OBJECT-TYPE
SYNTAX INTEGER { no(0), yes(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set this to be Master."
::= { turboRing 2 }
turboRingPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF TurboRingPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Turbo Ring Port Table."
::= { turboRing 3 }
turboRingPortEntry OBJECT-TYPE
SYNTAX TurboRingPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Turbo Ring Port Entry."
INDEX { turboRingPortIndex }
::= { turboRingPortTable 1 }
TurboRingPortEntry ::=
SEQUENCE {
turboRingPortIndex
INTEGER,
turboRingPortStatus
INTEGER,
turboRingPortDesignatedBridge
OCTET STRING,
turboRingPortDesignatedPort
INTEGER
}
turboRingPortIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Turbo Ring Port Index."
::= { turboRingPortEntry 1 }
turboRingPortStatus OBJECT-TYPE
SYNTAX INTEGER
{
portDisabled(0),
notTurboRingPort(1),
linkDown(2),
blocked(3),
learning(4),
forwarding(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Turbo Ring Port Status."
::= { turboRingPortEntry 2 }
turboRingPortDesignatedBridge OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address of the bridge which this
port considers to be the Designated Bridge for
this port's segment."
::= { turboRingPortEntry 3 }
turboRingPortDesignatedPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Port Number of the port on the Designated
Bridge for this port's segment."
::= { turboRingPortEntry 4 }
turboRingDesignatedMaster OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address of the bridge which is the Master of the TURBO RING."
::= { turboRing 6 }
turboRingRdntPort1 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port number of 1st Redundant Port on the TURBO RING."
::= { turboRing 7 }
turboRingRdntPort2 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port number of 2nd Redundant Port on the TURBO RING."
::= { turboRing 8 }
turboRingEnableCoupling OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This enable the ring coupling function."
::= { turboRing 9 }
turboRingCouplingPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The coupling port of ring coupling function."
::= { turboRing 10 }
turboRingCouplingPortStatus OBJECT-TYPE
SYNTAX INTEGER
{
portDisabled(0),
notCouplingPort(1),
linkDown(2),
blocked(3),
forwarding(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The coupling port status of ring coupling function."
::= { turboRing 11 }
turboRingControlPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The control port of ring coupling function."
::= { turboRing 12 }
turboRingControlPortStatus OBJECT-TYPE
SYNTAX INTEGER
{
portDisabled(0),
notControlPort(1),
linkDown(2),
blocked(3),
forwarding(5),
inactive(6),
active(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The control port status of ring coupling function."
::= { turboRing 13 }
turboRingBrokenStatus OBJECT-TYPE
SYNTAX INTEGER
{
na(0),
normal(1),
broken(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Turbo Ring broken display."
::= { turboRing 14 }
spanningTree OBJECT IDENTIFIER ::= { commRedundancy 3 }
spanningTreeRoot OBJECT-TYPE
SYNTAX INTEGER { no(0), yes(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The root of spanning tree."
::= { spanningTree 1 }
spanningTreeBridgePriority OBJECT-TYPE
SYNTAX INTEGER {priority0(0), priority4096(4096), priority8192(8192), priority12288(12288),
priority16384(16384), priority20480(20480), priority24576(24576),
priority28672(28672), priority32768(32768), priority36864(36864),
priority40960(40960), priority45056(45056), priority49152(49152),
priority53248(53248), priority57344(57344), priority61440(61440)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The bridge priority of spanning tree protocol."
::= { spanningTree 2 }
spanningTreeHelloTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The hello time of spanning tree protocol."
::= { spanningTree 3 }
spanningTreeMaxAge OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The max. age of spanning tree protocol."
::= { spanningTree 4 }
spanningTreeForwardingDelay OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Tje forwarding delay of spanning tree protocol."
::= { spanningTree 5 }
spanningTreeTable OBJECT-TYPE
SYNTAX SEQUENCE OF SpanningTreeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The spanning tree table."
::= { spanningTree 6 }
spanningTreeEntry OBJECT-TYPE
SYNTAX SpanningTreeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The spanning tree port entry."
INDEX { spanningTreeIndex }
::= { spanningTreeTable 1 }
SpanningTreeEntry ::=
SEQUENCE {
spanningTreeIndex
INTEGER,
enableSpanningTree
INTEGER,
spanningTreePortPriority
INTEGER,
spanningTreePortCost
INTEGER,
spanningTreePortStatus
INTEGER,
spanningTreePortEdge
INTEGER
}
spanningTreeIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of spanning tree table."
::= { spanningTreeEntry 1 }
enableSpanningTree OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This enable of spanning tree protocol for this port."
::= { spanningTreeEntry 2 }
spanningTreePortPriority OBJECT-TYPE
SYNTAX INTEGER {priority0(0), priority16(16), priority32(32), priority48(48),
priority64(64), priority80(80), priority96(96), priority112(112),
priority128(128), priority144(144), priority160(160), priority176(176),
priority192(192), priority208(208), priority224(224), priority240(240)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port priority of spanning tree protocol."
::= { spanningTreeEntry 3 }
spanningTreePortCost OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port cost of spanning tree protocol."
::= { spanningTreeEntry 4 }
spanningTreePortStatus OBJECT-TYPE
SYNTAX INTEGER
{
portDisabled(0),
notSpanningTreePort(1),
linkDown(2),
blocked(3),
learning(4),
forwarding(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port status of spanning tree protocol."
::= { spanningTreeEntry 5 }
spanningTreePortEdge OBJECT-TYPE
SYNTAX INTEGER { auto(0), true(1), false(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This configures the Edge Port property for this port."
::= { spanningTreeEntry 6 }
activeProtocolOfRedundancy OBJECT-TYPE
SYNTAX INTEGER { none(0), spanningTree(1), turboRing(2), turboRingV2(3), turboChain(4), mstp(5)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This shows the active redundancy protocol of this switch now. The none(0) stauts will
be showed if only if the switch's redundancy protocol is set to spanning tree and none of
ports enable spanning tree."
::= { commRedundancy 4 }
turboRingV2 OBJECT IDENTIFIER ::= { commRedundancy 5}
turboRingV2Ring1 OBJECT IDENTIFIER ::= { turboRingV2 1 }
ringIndexRing1 OBJECT-TYPE
SYNTAX INTEGER (1..2)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The turboRingV2 Ring Index."
::= { turboRingV2Ring1 1 }
ringEnableRing1 OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The turboRingV2 Ring1 Enalbe Config."
::= { turboRingV2Ring1 2 }
masterSetupRing1 OBJECT-TYPE
SYNTAX INTEGER { no(0), yes(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Is this a Master or Slave."
::= { turboRingV2Ring1 3 }
masterStatusRing1 OBJECT-TYPE
SYNTAX INTEGER { no(0), yes(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Set this to be Master."
::= { turboRingV2Ring1 4 }
designatedMasterRing1 OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address of the bridge which is the Master of the turboRingV2."
::= { turboRingV2Ring1 5 }
rdnt1stPortRing1 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port number of 1st Redundant Port on the turboRingV2."
::= { turboRingV2Ring1 6 }
rdnt1stPortStatusRing1 OBJECT-TYPE
SYNTAX INTEGER
{
disabled(0),
notRedundant(1),
linkdown(2),
blocking(3),
learning(4),
forwarding(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of 1st Redundant Port on the turboRingV2."
::= { turboRingV2Ring1 7 }
rdnt2ndPortRing1 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port number of 2nd Redundant Port on the turboRingV2."
::= { turboRingV2Ring1 8 }
rdnt2ndPortStatusRing1 OBJECT-TYPE
SYNTAX INTEGER
{
disabled(0),
notRedundant(1),
linkdown(2),
blocking(3),
learning(4),
forwarding(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of 2nd Redundant Port on the turboRingV2."
::= { turboRingV2Ring1 9 }
brokenStatusRing1 OBJECT-TYPE
SYNTAX INTEGER
{
na(0),
normal(1),
broken(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"turboRingV2 broken display."
::= { turboRingV2Ring1 10 }
turboRingV2Ring2 OBJECT IDENTIFIER ::= { turboRingV2 2 }
ringIndexRing2 OBJECT-TYPE
SYNTAX INTEGER (1..2)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The turboRingV2 Ring Index."
::= { turboRingV2Ring2 1 }
ringEnableRing2 OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The turboRingV2 Ring2 Enalbe Config."
::= { turboRingV2Ring2 2 }
masterSetupRing2 OBJECT-TYPE
SYNTAX INTEGER { no(0), yes(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Is this a Master or Slave."
::= { turboRingV2Ring2 3 }
masterStatusRing2 OBJECT-TYPE
SYNTAX INTEGER { no(0), yes(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Set this to be Master."
::= { turboRingV2Ring2 4 }
designatedMasterRing2 OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address of the bridge which is the Master of the turboRingV2."
::= { turboRingV2Ring2 5 }
rdnt1stPortRing2 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port number of 1st Redundant Port on the turboRingV2."
::= { turboRingV2Ring2 6 }
rdnt1stPortStatusRing2 OBJECT-TYPE
SYNTAX INTEGER
{
disabled(0),
notRedundant(1),
linkdown(2),
blocking(3),
learning(4),
forwarding(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of 1st Redundant Port on the turboRingV2."
::= { turboRingV2Ring2 7 }
rdnt2ndPortRing2 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port number of 2nd Redundant Port on the turboRingV2."
::= { turboRingV2Ring2 8 }
rdnt2ndPortStatusRing2 OBJECT-TYPE
SYNTAX INTEGER
{
disabled(0),
notRedundant(1),
linkdown(2),
blocking(3),
learning(4),
forwarding(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of 2nd Redundant Port on the turboRingV2."
::= { turboRingV2Ring2 9 }
brokenStatusRing2 OBJECT-TYPE
SYNTAX INTEGER
{
na(0),
normal(1),
broken(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"turboRingV2 broken display."
::= { turboRingV2Ring2 10 }
turboRingV2Coupling OBJECT IDENTIFIER ::= { turboRingV2 3 }
couplingEnable OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting the ring coupling enable."
::= { turboRingV2Coupling 1 }
couplingMode OBJECT-TYPE
SYNTAX INTEGER { dualHoming(1), couplingBackup(2), couplingPrimary(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting the ring coupling mode."
::= { turboRingV2Coupling 2 }
coupling1stPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If in 'DUAL HOMING' mode,port name is 'Primary port',If in 'COUPLING' mode,port name is 'Coupling port'"
::= { turboRingV2Coupling 3 }
coupling1stPortStatus OBJECT-TYPE
SYNTAX INTEGER
{
disabled(0),
notRedundant(1),
linkdown(2),
blocking(3),
learning(4),
forwarding(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 1st coupling port status of coupling function."
::= { turboRingV2Coupling 4 }
coupling2ndPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If in 'DUAL HOMING' mode,port name is 'Backup port',If in 'COUPLING' mode,port name is no used."
::= { turboRingV2Coupling 5 }
coupling2ndPortStatus OBJECT-TYPE
SYNTAX INTEGER
{
disabled(0),
notRedundant(1),
linkdown(2),
blocking(3),
learning(4),
forwarding(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 2nd coupling port status of coupling function."
::= { turboRingV2Coupling 6 }
turboChain OBJECT IDENTIFIER ::= { commRedundancy 6}
turboChainRole OBJECT-TYPE
SYNTAX INTEGER
{
head(1),
member(2),
tail(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Role of TURBO CHAIN."
::= { turboChain 1 }
turboChainPort1 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port number of 1st Redundant Port on the TURBO CHAIN.
If switch role is Turbo Chain Head, this is Head port,
If Switch role is Turbo Chain Tail, this is Tail port."
::= { turboChain 2 }
turboChainPort2 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port number of 2nd Redundant Port on the TURBO CHAIN.
It is the member port of TurboChain"
::= { turboChain 3 }
turboChainPort1Status OBJECT-TYPE
SYNTAX INTEGER
{
notTurboChainPort(0),
linkDown(1),
blocking(2),
blocked(3),
forwarding(4),
na(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Turbo Chain Port Status."
::= { turboChain 4 }
turboChainPort2Status OBJECT-TYPE
SYNTAX INTEGER
{
notTurboChainPort(0),
linkDown(1),
blocking(2),
blocked(3),
forwarding(4),
na(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Turbo Chain Port Status."
::= { turboChain 5 }
turboChainPort1PartnerBridge OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address of the next bridge "
::= { turboChain 6 }
turboChainPort2PartnerBridge OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address of the neighbor Turbo Chain switch"
::= { turboChain 7 }
-- -------------------------------------------------------------
-- relay warning
-- -------------------------------------------------------------
relayWarning OBJECT IDENTIFIER ::= { swMgmt 17 }
relayWarningTable OBJECT-TYPE
SYNTAX SEQUENCE OF RelayWarningEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The relay warning table."
::= { relayWarning 11 }
relayWarningEntry OBJECT-TYPE
SYNTAX RelayWarningEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Relay Warning Entry."
INDEX { relayAlarmIndex }
::= { relayWarningTable 1 }
RelayWarningEntry ::=
SEQUENCE {
relayAlarmIndex
INTEGER,
relayWarningRelayContact
INTEGER,
overrideRelayWarningSetting
INTEGER,
relayWarningPower1Off
INTEGER,
relayWarningPower1OffStatus
INTEGER,
relayWarningPower2Off
INTEGER,
relayWarningPower2OffStatus
INTEGER,
relayWarningTurboRingBreak
INTEGER,
relayWarningTurboRingBreakStatus
INTEGER
}
relayAlarmIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Relay alarm index."
::= { relayWarningEntry 1 }
relayWarningRelayContact OBJECT-TYPE
SYNTAX INTEGER {closed(0) ,opened(1)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The first Relay contact status."
::= { relayWarningEntry 2 }
overrideRelayWarningSetting OBJECT-TYPE
SYNTAX INTEGER { no(0), yes(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Override the relay warning setting."
::= { relayWarningEntry 3 }
relayWarningPower1Off OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The relay contact will be opened while the first power input off."
::= { relayWarningEntry 4 }
relayWarningPower1OffStatus OBJECT-TYPE
SYNTAX INTEGER { not-triggered(0), triggered(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The relay contact is opened as the first power input off.."
::= { relayWarningEntry 5 }
relayWarningPower2Off OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The relay contact will be opened while the second power input off."
::= { relayWarningEntry 6 }
relayWarningPower2OffStatus OBJECT-TYPE
SYNTAX INTEGER { not-triggered(0), triggered(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The relay contact is opened as the second power input off."
::= { relayWarningEntry 7 }
relayWarningTurboRingBreak OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The relay contact will be opened while turbo ring break."
::= { relayWarningEntry 8 }
relayWarningTurboRingBreakStatus OBJECT-TYPE
SYNTAX INTEGER { not-triggered(0), triggered(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The relay contact is opened while turbo ring is broken."
::= { relayWarningEntry 9 }
portRelayWarningTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortRelayWarningEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The relay warning port table."
::= { relayWarning 12 }
portRelayWarningEntry OBJECT-TYPE
SYNTAX PortRelayWarningEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Port Relay Warning Entry."
INDEX { portIndex,relayAlarmIndex }
::= { portRelayWarningTable 1 }
PortRelayWarningEntry ::=
SEQUENCE {
relayWarningLinkChanged
INTEGER,
relayWarningLinkChangedStatus
INTEGER,
relayWarningTrafficOverload
INTEGER,
relayWarningTrafficOverloadStatus
INTEGER,
relayWarningRxTrafficThreshold
INTEGER,
relayWarningTrafficDuration
INTEGER
}
relayWarningLinkChanged OBJECT-TYPE
SYNTAX INTEGER { ignore(0), on2off(1), off2on(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The relay contact will be opened while this port's link status is changed."
::= { portRelayWarningEntry 1 }
relayWarningLinkChangedStatus OBJECT-TYPE
SYNTAX INTEGER { not-triggered(0), triggered(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The relay contact is opened as this port's link status is changed."
::= { portRelayWarningEntry 2 }
relayWarningTrafficOverload OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The relay contact will be opened while this port's traffic is overload."
::= { portRelayWarningEntry 3 }
relayWarningTrafficOverloadStatus OBJECT-TYPE
SYNTAX INTEGER { not-triggered(0), triggered(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The relay contact is opened as this port's traffic is overload."
::= { portRelayWarningEntry 4 }
relayWarningRxTrafficThreshold OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The threshold of the port traffic will be over loading."
::= { portRelayWarningEntry 5 }
relayWarningTrafficDuration OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The duration of the port traffic will be over loading."
::= { portRelayWarningEntry 6 }
diRelayWarningTable OBJECT-TYPE
SYNTAX SEQUENCE OF DiRelayWarningEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The relay warning DI table."
::= { relayWarning 13 }
diRelayWarningEntry OBJECT-TYPE
SYNTAX DiRelayWarningEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"DI Relay Warning Entry."
INDEX { diIndex,relayAlarmIndex }
::= { diRelayWarningTable 1 }
DiRelayWarningEntry ::=
SEQUENCE {
relayWarningDiInputChanged
INTEGER,
relayWarningDiInputChangedStatus
INTEGER
}
relayWarningDiInputChanged OBJECT-TYPE
SYNTAX INTEGER { disable(0), off(1), on(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The relay contact will be opened while the DI input changed."
::= { diRelayWarningEntry 1 }
relayWarningDiInputChangedStatus OBJECT-TYPE
SYNTAX INTEGER { not-triggered(0), triggered(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The relay contact is opened as the first DI input changed.."
::= { diRelayWarningEntry 2 }
-- -------------------------------------------------------------
-- traffic prioritization
-- -------------------------------------------------------------
trafficPrioritization OBJECT IDENTIFIER ::= { swMgmt 18 }
qosClassification OBJECT IDENTIFIER ::= { trafficPrioritization 1 }
schedulingMechanism OBJECT-TYPE
SYNTAX INTEGER {schedweightfair(0),schedstrict(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The scheduling mechanism."
::= { qosClassification 1 }
qosPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF QosPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The QoS port table."
::= { qosClassification 2 }
qosPortEntry OBJECT-TYPE
SYNTAX QosPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The QoS Port Entry."
INDEX { portIndex }
::= { qosPortTable 1 }
QosPortEntry ::=
SEQUENCE {
dscpInspection
INTEGER,
cosInspection
INTEGER,
portPriority
INTEGER
}
dscpInspection OBJECT-TYPE
SYNTAX INTEGER {no (0),yes(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This enable the inspection of dscp field."
::= { qosPortEntry 1 }
cosInspection OBJECT-TYPE
SYNTAX INTEGER {no (0),yes(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This enable the inspection of CoS field."
::= { qosPortEntry 2 }
portPriority OBJECT-TYPE
SYNTAX INTEGER {priority0(0), priority1(1), priority2(2), priority3(3),
priority4(4), priority5(5), priority6(6), priority7(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The deault priority of the port."
::= { qosPortEntry 3 }
priorityMapping OBJECT IDENTIFIER ::= { trafficPrioritization 2 }
priorityMappingTable OBJECT-TYPE
SYNTAX SEQUENCE OF PriorityMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The priority mapping table."
::= { priorityMapping 1 }
priorityMappingEntry OBJECT-TYPE
SYNTAX PriorityMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Priority mapping Entry."
INDEX { priorityTag}
::= { priorityMappingTable 1 }
PriorityMappingEntry ::=
SEQUENCE {
priorityTag
INTEGER,
priorityMappedQueue
INTEGER
}
priorityTag OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The priority tag of QOS field."
::= { priorityMappingEntry 1 }
priorityMappedQueue OBJECT-TYPE
SYNTAX INTEGER {trafficclass0(0),trafficclass1(1),trafficclass2(2),trafficclass3(3)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The egress queue corresponding to it's priority value."
::= { priorityMappingEntry 2 }
dscpMapping OBJECT IDENTIFIER ::= { trafficPrioritization 3 }
dscpMappingTable OBJECT-TYPE
SYNTAX SEQUENCE OF DscpMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The DSCP mapping table."
::= { dscpMapping 1 }
dscpMappingEntry OBJECT-TYPE
SYNTAX DscpMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"DSCP mapping Entry."
INDEX { dscpClass }
::= { dscpMappingTable 1 }
DscpMappingEntry ::=
SEQUENCE {
dscpClass
INTEGER,
dscpMappedPriority
INTEGER
}
dscpClass OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The DSCP class of TOS field."
::= { dscpMappingEntry 1 }
dscpMappedPriority OBJECT-TYPE
SYNTAX INTEGER {priority0(0), priority1(1), priority2(2), priority3(3),
priority4(4), priority5(5), priority6(6), priority7(7)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The frame's priority corresponding to it's DSCP class value."
::= { dscpMappingEntry 2 }
-- -------------------------------------------------------------
-- vlan
-- -------------------------------------------------------------
vlan OBJECT IDENTIFIER ::= { swMgmt 19 }
vlanPortSettingTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlanPortSettingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vlan seting table of ports."
::= { vlan 1 }
vlanPortSettingEntry OBJECT-TYPE
SYNTAX VlanPortSettingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Port Setting Entry of VLAN."
INDEX { portIndex }
::= { vlanPortSettingTable 1 }
VlanPortSettingEntry ::=
SEQUENCE {
portVlanType
INTEGER,
portDefaultVid
INTEGER,
portFixedVid
DisplayString,
portFixedVidUntag
DisplayString,
portForbiddenVid
DisplayString
}
portVlanType OBJECT-TYPE
SYNTAX INTEGER {access(0),trunk(1),hybrid(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The vlan type of port."
::= { vlanPortSettingEntry 1 }
portDefaultVid OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The PVID of port."
::= { vlanPortSettingEntry 2 }
portFixedVid OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The fixed vids of (trunk) port."
::= { vlanPortSettingEntry 3 }
portForbiddenVid OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The forbidden vids of (trunk)port."
::= { vlanPortSettingEntry 4 }
portFixedVidUntag OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The fixed untag vids of (trunk) port."
::= { vlanPortSettingEntry 5 }
vlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VLAN table."
::= { vlan 2 }
vlanEntry OBJECT-TYPE
SYNTAX VlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"VLAN Entry."
INDEX { vlanId }
::= { vlanTable 1 }
VlanEntry ::=
SEQUENCE {
vlanId
INTEGER,
joinedAccessPorts
PortList,
joinedTrunkPorts
PortList,
joinedHybridPorts
PortList,
vlanName
DisplayString
}
vlanId OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN id."
::= { vlanEntry 1 }
joinedAccessPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The access ports that joined this VID."
::= { vlanEntry 2 }
joinedTrunkPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The trunk ports that joined this VID."
::= { vlanEntry 3 }
joinedHybridPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The hybrid ports that joined this VID."
::= { vlanEntry 4 }
vlanName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The VLAN name."
::= { vlanEntry 5 }
managementVlanId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The management VLAN id."
::= { vlan 3 }
vlanType OBJECT-TYPE
SYNTAX INTEGER {tagBased(0),portBased(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"VLAN Type."
::= { vlan 4 }
portbaseVlanSettingTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortbaseVlanSettingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Port base Vlan Setting Table."
::= { vlan 5 }
portbaseVlanSettingEntry OBJECT-TYPE
SYNTAX PortbaseVlanSettingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Port base Vlan Setting Entry."
INDEX { portbaseVlanSettingIndex }
::= { portbaseVlanSettingTable 1 }
PortbaseVlanSettingEntry ::=
SEQUENCE {
portbaseVlanSettingIndex
INTEGER,
portbaseVlanMemberPorts
PortList
}
portbaseVlanSettingIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"port base Vlan Group Index."
::= { portbaseVlanSettingEntry 1 }
portbaseVlanMemberPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"port base Vlan Group Member Ports."
::= { portbaseVlanSettingEntry 2 }
enableGvrp OBJECT-TYPE
SYNTAX INTEGER {disable(0),enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable GVRP."
::= { vlan 6 }
-- -------------------------------------------------------------
-- multicast filtering
-- -------------------------------------------------------------
multicastFiltering OBJECT IDENTIFIER ::= { swMgmt 20 }
igmpSnooping OBJECT IDENTIFIER ::= { multicastFiltering 1 }
querierQueryInterval OBJECT-TYPE
SYNTAX INTEGER (20..600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This query interval of the querier function for this VLAN."
::= { igmpSnooping 1 }
igmpSnoopingSettingTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpSnoopingSettingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IGMP snooping setting table."
::= { igmpSnooping 2 }
igmpSnoopingSettingEntry OBJECT-TYPE
SYNTAX IgmpSnoopingSettingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IGMP snooping setting Entry."
INDEX { vlanId }
::= { igmpSnoopingSettingTable 1 }
IgmpSnoopingSettingEntry ::=
SEQUENCE {
enableIgmpSnooping
INTEGER,
enableQuerier
INTEGER,
fixedMulticastQuerierPorts
PortList,
learnedMulticastQuerierPorts
PortList
}
enableIgmpSnooping OBJECT-TYPE
SYNTAX INTEGER {disable(0),enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This enable the IGMP snooping functon in this VLAN."
::= { igmpSnoopingSettingEntry 1 }
enableQuerier OBJECT-TYPE
SYNTAX INTEGER {disable(0), igmpv2(1), igmpv3(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This enable the querier function for this VLAN."
::= { igmpSnoopingSettingEntry 2 }
fixedMulticastQuerierPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ports that multicast-Querier exist."
::= { igmpSnoopingSettingEntry 3 }
learnedMulticastQuerierPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ports that multicast-Querier exist."
::= { igmpSnoopingSettingEntry 4 }
enableGlobalIgmpSnooping OBJECT-TYPE
SYNTAX INTEGER {disable(0),enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This enable the IGMP snooping functon ."
::= { igmpSnooping 4 }
multicastFastForwarding OBJECT-TYPE
SYNTAX INTEGER {disable(0),enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This Enable Multicast Fast Forwarding Mode functon ."
::= { igmpSnooping 7 }
staticMulticast OBJECT IDENTIFIER ::= { multicastFiltering 2 }
staticMulticastTable OBJECT-TYPE
SYNTAX SEQUENCE OF StaticMulticastEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The static multicast table."
::= { staticMulticast 1 }
staticMulticastEntry OBJECT-TYPE
SYNTAX StaticMulticastEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Static multicast Entry."
INDEX { staticMulticastAddress }
::= { staticMulticastTable 1 }
StaticMulticastEntry ::=
SEQUENCE {
staticMulticastAddress
MacAddress,
staticMulticastPorts
PortList,
staticMulticastStatus
INTEGER
}
staticMulticastAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The static multicast address."
::= { staticMulticastEntry 1 }
staticMulticastPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The port map of the static multicast address."
::= { staticMulticastEntry 2 }
staticMulticastStatus OBJECT-TYPE
SYNTAX INTEGER {
active(1),
createAndGo(4),
createAndWait(5),
destroy(6)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status is active to indicate normal.
Use createAndGo to create new on multiple SET.
Use createAndWait to create new on one SET all then actvie.
Use destroy to delete this row."
::= { staticMulticastEntry 3 }
--
-- GMRP
--
gmrp OBJECT IDENTIFIER ::= { multicastFiltering 3 }
-- gmrp setting table
gmrpSettingTable OBJECT-TYPE
SYNTAX SEQUENCE OF GmrpSettingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The GMRP setting table."
::= { gmrp 1 }
gmrpSettingEntry OBJECT-TYPE
SYNTAX GmrpSettingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The GMRP Setting Entry."
INDEX { portIndex }
::= { gmrpSettingTable 1 }
GmrpSettingEntry ::=
SEQUENCE {
enableGMRP
INTEGER
}
enableGMRP OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable GMRP."
::= { gmrpSettingEntry 1 }
-- gmrp status
gmrpTable OBJECT-TYPE
SYNTAX SEQUENCE OF GmrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The GMRP status table."
::= { gmrp 2 }
gmrpEntry OBJECT-TYPE
SYNTAX GmrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The GMRP Status Entry."
INDEX { gmrpMulticastGroup }
::= { gmrpTable 1 }
GmrpEntry ::=
SEQUENCE {
gmrpMulticastGroup
MacAddress,
gmrpFixedPorts
PortList,
gmrpLearnedPorts
PortList
}
gmrpMulticastGroup OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"GMRP multicast group."
::= { gmrpEntry 1 }
gmrpFixedPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ports that joined GMRP multicast group manually."
::= { gmrpEntry 2 }
gmrpLearnedPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ports that joined GMRP multicast group by GMRP learning."
::= { gmrpEntry 3 }
-- -------------------------------------------------------------
-- Multicast Filtering Behavior
-- -------------------------------------------------------------
mfb OBJECT IDENTIFIER ::= { multicastFiltering 4 }
-- mfb setting table
mfbSettingTable OBJECT-TYPE
SYNTAX SEQUENCE OF MfbSettingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Multicast Filtering Behavior setting table."
::= { mfb 1 }
mfbSettingEntry OBJECT-TYPE
SYNTAX MfbSettingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Multicast Filtering Behavior Setting Entry."
INDEX { portIndex }
::= { mfbSettingTable 1 }
MfbSettingEntry ::=
SEQUENCE {
filterBehavior
INTEGER
}
filterBehavior OBJECT-TYPE
SYNTAX INTEGER {
forwardUnknown(2),
filterUnknown(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Port forward multicast packet behavior."
::= { mfbSettingEntry 1 }
-- -------------------------------------------------------------
-- rate limiting
-- -------------------------------------------------------------
rateLimiting OBJECT IDENTIFIER ::= { swMgmt 21 }
rateLimitingAction OBJECT-TYPE
SYNTAX INTEGER {droppacket(0),portDisable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The rate limiting mode."
::= { rateLimiting 4 }
-- droppacketMode --
-- ingress --
droppacketModeRateLimitingIngressTable OBJECT-TYPE
SYNTAX SEQUENCE OF DroppacketModeRateLimitingIngressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The rate limiting table."
::= { rateLimiting 1 }
droppacketModeRateLimitingIngressEntry OBJECT-TYPE
SYNTAX DroppacketModeRateLimitingIngressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Rate limiting Entry."
INDEX { portIndex }
::= { droppacketModeRateLimitingIngressTable 1 }
DroppacketModeRateLimitingIngressEntry ::=
SEQUENCE {
ingressLimitRate
INTEGER,
egressLimitRate
INTEGER
}
ingressLimitRate OBJECT-TYPE
SYNTAX INTEGER {notlimited(0), percentage03(1), percentage05(2), percentage10(3),
percentage15(4), percentage25(5), percentage35(6), percentage50(7),
percentage65(8), percentage85(9)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ingress limit mode."
::= { droppacketModeRateLimitingIngressEntry 1 }
egressLimitRate OBJECT-TYPE
SYNTAX INTEGER {notlimited(0), percentage03(1), percentage05(2), percentage10(3),
percentage15(4), percentage25(5), percentage35(6), percentage50(7),
percentage65(8), percentage85(9)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The egress limit mode."
::= { droppacketModeRateLimitingIngressEntry 2 }
-- broadcastStorm --
broadcastStormProtection OBJECT IDENTIFIER ::= { rateLimiting 2 }
bcastStormProtection OBJECT-TYPE
SYNTAX INTEGER {disable(0),enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Broadcast Storm Protection"
::= { broadcastStormProtection 1 }
bcastStormProtectionIncludeMcast OBJECT-TYPE
SYNTAX INTEGER {no(0),yes(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Broadcast Storm Protection includes Multicast packets"
::= { broadcastStormProtection 2 }
bcastStormProtectionIncludeUcast OBJECT-TYPE
SYNTAX INTEGER {no(0),yes(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Broadcast Storm Protection includes Unicast packets"
::= { broadcastStormProtection 3 }
-- portDisableMode --
portDisableMode OBJECT IDENTIFIER ::= { rateLimiting 3 }
portDisableModePeriod OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Check time. "
::= {portDisableMode 1 }
portDisableModeTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortDisableModeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The rate limiting table."
::= { portDisableMode 2 }
portDisableModeEntry OBJECT-TYPE
SYNTAX PortDisableModeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Rate limiting Entry."
INDEX { portIndex }
::= { portDisableModeTable 1 }
PortDisableModeEntry ::=
SEQUENCE {
ingressLimit
INTEGER
}
ingressLimit OBJECT-TYPE
SYNTAX INTEGER {notlimited(0), rateMega1Fps4464(1), rateMega2Fps7441(2), rateMega3Fps14881(3),
rateMega4Fps22322(4), rateMega5Fps37203(5), rateMega6Fps52084(6), rateMega7Fps74405(7), rateGiga1Fps44640(8), rateGiga2Fps74410(9), rateGiga3Fps148810(10),
rateGiga4Fps223220(11), rateGiga5Fps372030(12), rateGiga6Fps520840(13), rateGiga7Fps744050(14)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ingress limit mode."
::= { portDisableModeEntry 1 }
-- -------------------------------------------------------------
-- security
-- -------------------------------------------------------------
security OBJECT IDENTIFIER ::= { swMgmt 22 }
-- -------------------------------------------------------------
-- user login authentication
-- -------------------------------------------------------------
userLoginSetting OBJECT IDENTIFIER ::= { security 1 }
userLoginServer OBJECT-TYPE
SYNTAX INTEGER {
tacacsLocal(1),
radiusLocal(2),
tacacs(3),
radius(4),
local(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set user login server option."
::= { userLoginSetting 1 }
tacacsServerSetting OBJECT IDENTIFIER ::= { userLoginSetting 2 }
tacacsLoginAuthServer OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set Tacacs+ Server IP Address/Domain name."
::= { tacacsServerSetting 1 }
tacacsLoginAuthPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set Tacacs+ Port."
::= {tacacsServerSetting 2 }
tacacsLoginAuthSharedKey OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set Tacacs+ Shared Key."
::= { tacacsServerSetting 3 }
tacacsLoginAuthAuthType OBJECT-TYPE
SYNTAX INTEGER {
ascii(0),
pap(1),
chap(2),
mschap(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set Tacacs+ Shared Key."
::= { tacacsServerSetting 4 }
tacacsLoginAuthTimeout OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set Tacacs+ Shared Key."
::= { tacacsServerSetting 5 }
radiusServerSetting OBJECT IDENTIFIER ::= { userLoginSetting 3 }
radiusLoginAuthServer OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set Radius Server IP Address/Domain name."
::= { radiusServerSetting 1 }
radiusLoginAuthPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set Radius Port."
::= { radiusServerSetting 2 }
radiusLoginAuthSharedKey OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set Radius Shared Key."
::= { radiusServerSetting 3 }
radiusLoginAuthAuthType OBJECT-TYPE
SYNTAX INTEGER {
pap(0),
chap(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set Radius Shared Key."
::= { radiusServerSetting 4 }
radiusLoginAuthTimeout OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set Radius Shared Key."
::= { radiusServerSetting 5 }
-- -------------------------------------------------------------
-- port access control
-- -------------------------------------------------------------
portAccessControl OBJECT IDENTIFIER ::= { security 2 }
--
-- static port lock
--
staticPortLockLegacy OBJECT IDENTIFIER ::= { portAccessControl 1 }
staticPortLockLegacyAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The static port lock address."
::= { staticPortLockLegacy 1 }
staticPortLockLegacyPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The port of the static port lock address."
::= { staticPortLockLegacy 2 }
staticPortLockLegacyStatus OBJECT-TYPE
SYNTAX INTEGER {
active(1),
createAndGo(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status is active to indicate normal.
Use createAndGo to create new on multiple SET."
::= { staticPortLockLegacy 3 }
--
-- IEEE 802.1X
--
dot1x OBJECT IDENTIFIER ::= { portAccessControl 2 }
-- ieee 802.1x global settings
dataBaseOption OBJECT-TYPE
SYNTAX INTEGER {
local(1),
radius(2),
radiuslocal(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set IEEE 802.1X database option."
::= { dot1x 1 }
dot1xReauthEnable OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable IEEE 802.1X Re-authentication."
::= { dot1x 5 }
dot1xReauthPeriod OBJECT-TYPE
SYNTAX INTEGER (60..3600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set IEEE 802.1X Re-authentication Period."
::= { dot1x 6 }
-- ieee 802.1X port setting table
dot1xSettingTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dot1xSettingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IEEE 802.1X Port Setting Table."
::= { dot1x 7 }
dot1xSettingEntry OBJECT-TYPE
SYNTAX Dot1xSettingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IEEE 802.1X Port Setting Entry."
INDEX { portIndex }
::= { dot1xSettingTable 1 }
Dot1xSettingEntry ::=
SEQUENCE {
enableDot1X
INTEGER
}
enableDot1X OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable IEEE 802.1X."
::= { dot1xSettingEntry 1 }
-- ieee 802.1X re-authentication table
dot1xReauthTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dot1xReauthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IEEE 802.1X Re-authentication Table."
::= { dot1x 8 }
dot1xReauthEntry OBJECT-TYPE
SYNTAX Dot1xReauthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IEEE 802.1X Re-authentication Entry."
INDEX { dot1xReauthPortIndex }
::= { dot1xReauthTable 1 }
Dot1xReauthEntry ::=
SEQUENCE {
dot1xReauthPortIndex
INTEGER,
dot1xReauth
INTEGER
}
dot1xReauthPortIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IEEE 802.1X Enabled Port Index."
::= { dot1xReauthEntry 1 }
dot1xReauth OBJECT-TYPE
SYNTAX INTEGER {
no(0),
yes(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Reauth IEEE 802.1X."
::= { dot1xReauthEntry 2 }
-- ieee 802.1x dot1x Radius Server settings
dot1xRadius OBJECT IDENTIFIER ::= { dot1x 9 }
dot1xSameAsAuthServer OBJECT-TYPE
SYNTAX INTEGER
{
notSame(0),
same(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set Radius Server IP Address/Domain name."
::= { dot1xRadius 1 }
dot1x1stRadiusServer OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set Radius Server IP Address/Domain name."
::= { dot1xRadius 2 }
dot1x1stRadiusPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set Radius Port."
::= { dot1xRadius 3 }
dot1x1stRadiusSharedKey OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set Radius Shared Key."
::= { dot1xRadius 4 }
dot1x2ndRadiusServer OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set Radius Server IP Address/Domain name."
::= { dot1xRadius 5 }
dot1x2ndRadiusPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set Radius Port."
::= { dot1xRadius 6 }
dot1x2ndRadiusSharedKey OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set Radius Shared Key."
::= { dot1xRadius 7 }
--
-- port access control table
--
portAccessControlTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortAccessControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Port Access Control table."
::= { portAccessControl 3 }
portAccessControlEntry OBJECT-TYPE
SYNTAX PortAccessControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Port Access Control table entry."
INDEX { portAccessControlAddress, portAccessControlVid }
::= { portAccessControlTable 1 }
PortAccessControlEntry ::=
SEQUENCE {
portAccessControlAddress
MacAddress,
portAccessControlPortNo
INTEGER,
portAccessControlAccessStatus
INTEGER,
portAccessControlStatus
INTEGER,
portAccessControlVid
INTEGER
}
portAccessControlAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address which is static locked or IEEE 802.1X authorized."
::= { portAccessControlEntry 1 }
portAccessControlPortNo OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port number that the Port Access Control address resides."
::= { portAccessControlEntry 2 }
portAccessControlAccessStatus OBJECT-TYPE
SYNTAX INTEGER {
staticLock(1),
authorized(2),
unAuthorized(3),
authorizing(4),
macAddrSticky(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The access status of the Port Access Control address."
::= { portAccessControlEntry 3 }
portAccessControlStatus OBJECT-TYPE
SYNTAX INTEGER {
active(1),
createAndGo(4),
createAndWait(5),
destroy(6)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status is active to indicate normal.
Use createAndGo to create new on multiple SET.
Use createAndWait to create new on one SET all then actvie.
Use destroy to delete this row."
::= { portAccessControlEntry 4 }
portAccessControlVid OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vid number that the Port Access Control address resides."
::= { portAccessControlEntry 5 }
--
-- Port Security
--
portSecurity OBJECT IDENTIFIER ::= { portAccessControl 4 }
portSecurityModeTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortSecurityModeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Port security mode"
::= { portSecurity 1 }
portSecurityModeEntry OBJECT-TYPE
SYNTAX PortSecurityModeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Port security mode entry."
INDEX { portSecurityModePort }
::= { portSecurityModeTable 1 }
PortSecurityModeEntry ::=
SEQUENCE {
portSecurityModePort
INTEGER,
portSecurityModeSelect
INTEGER,
portSecurityModeLimit
INTEGER,
portSecurityModeViolationPortDisable
INTEGER,
portSecurityModeStatus
INTEGER
}
portSecurityModePort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Set port security mode to specific port."
::= { portSecurityModeEntry 1 }
portSecurityModeSelect OBJECT-TYPE
SYNTAX INTEGER { normal-mode(0), static-portlock(1), mac-address-sticky(2) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Select the port security mode of the port."
::= { portSecurityModeEntry 2 }
portSecurityModeLimit OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If port security mode is MAC address sticky, set the limit of the port.
If port security mode is not MAC address sticky, set the limit to 0."
::= { portSecurityModeEntry 3 }
portSecurityModeViolationPortDisable OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable the violation port disable."
::= { portSecurityModeEntry 4 }
portSecurityModeStatus OBJECT-TYPE
SYNTAX INTEGER {
active(1),
createAndGo(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status is active to indicate normal.
Use createAndGo to create new on multiple SET."
::= { portSecurityModeEntry 5 }
staticPortLock OBJECT IDENTIFIER ::= { portSecurity 2 }
staticPortLockAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The static port lock address."
::= { staticPortLock 1 }
staticPortLockPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The port of the static port lock address."
::= { staticPortLock 2 }
staticPortLockStatus OBJECT-TYPE
SYNTAX INTEGER {
active(1),
createAndGo(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status is active to indicate normal.
Use createAndGo to create new on multiple SET."
::= { staticPortLock 3 }
staticPortLockVid OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Add vlan of the static port lock address. For SVL switch, vid should be 0"
::= { staticPortLock 4 }
macAddressSticky OBJECT IDENTIFIER ::= { portSecurity 3 }
macAddressStickyAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Manually add a MAC sticky address."
::= { macAddressSticky 1 }
macAddressStickyPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Add MAC sticky address to the specific port."
::= { macAddressSticky 2 }
macAddressStickyVid OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Add MAC sticky address to the specific vlan. For SVL switch, vid should be 0"
::= { macAddressSticky 3 }
macAddressStickyStatus OBJECT-TYPE
SYNTAX INTEGER {
active(1),
createAndGo(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status is active to indicate normal.
Use createAndGo to create new on multiple SET."
::= { macAddressSticky 4 }
--
-- MAC Authentication Bypass
--
mab OBJECT IDENTIFIER ::= { portAccessControl 5 }
-- MAB global settings
mabDBOption OBJECT-TYPE
SYNTAX INTEGER {
radius(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set MAB database option."
::= { mab 1 }
mabReauthEnable OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable MAB Re-authorizing."
::= { mab 2 }
mabReauthPeriod OBJECT-TYPE
SYNTAX INTEGER (60..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set MAB Re-authorizing Period."
::= { mab 3 }
mabRestartEnable OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable MAB Re-start."
::= { mab 4 }
mabRestartPeriod OBJECT-TYPE
SYNTAX INTEGER (5..300)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set MAB Re-start Period."
::= { mab 5 }
-- ieee 802.1X port setting table
mabSettingTable OBJECT-TYPE
SYNTAX SEQUENCE OF MABSettingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MAB Setting Table."
::= { mab 6 }
mabSettingEntry OBJECT-TYPE
SYNTAX MABSettingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MAB Port Setting Entry."
INDEX { portIndex }
::= { mabSettingTable 1 }
MABSettingEntry ::=
SEQUENCE {
enableMAB
INTEGER
}
enableMAB OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable MAB."
::= { mabSettingEntry 1 }
-- -------------------------------------------------------------
-- accessible ip
-- -------------------------------------------------------------
accessibleIP OBJECT IDENTIFIER ::= { swMgmt 30 }
enableAccessibleIP OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable the accessible IP address list."
::= { accessibleIP 1 }
accessibleIpTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccessibleIpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"accessibleIP."
::= { accessibleIP 2 }
accessibleIpEntry OBJECT-TYPE
SYNTAX AccessibleIpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Accessible IP address entry."
INDEX { accessibleIpAddress }
::= { accessibleIpTable 1 }
AccessibleIpEntry ::=
SEQUENCE {
accessibleIpAddress
IpAddress,
accessibleIpNetMask
IpAddress,
accessibleIpStatus
INTEGER
}
accessibleIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Accessible IP address"
::= { accessibleIpEntry 1 }
accessibleIpNetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Accessible IP netmask."
::= { accessibleIpEntry 2 }
accessibleIpStatus OBJECT-TYPE
SYNTAX INTEGER {
active(1),
createAndGo(4),
createAndWait(5),
destroy(6)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status is active to indicate normal.
Use createAndGo to create new on multiple SET.
Use createAndWait to create new on one SET all then actvie.
Use destroy to delete this row."
::= { accessibleIpEntry 3 }
-- -------------------------------------------------------------
-- system file update
-- -------------------------------------------------------------
sysFileUpdate OBJECT IDENTIFIER ::= { swMgmt 31 }
tftpServer OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TFTP Server name(IP Address)"
::= { sysFileUpdate 1 }
firmwarePathName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The path name of firmware file in the TFTP Server"
::= { sysFileUpdate 2 }
logPathName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The path name of log file in the TFTP Server"
::= { sysFileUpdate 3 }
confPathName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The path name of configuration file in the TFTP Server"
::= { sysFileUpdate 4 }
tftpUpdate OBJECT-TYPE
SYNTAX INTEGER {
importFirmware(1),
importConfig(2),
exportConfig(3),
exportLog(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
""
::= { sysFileUpdate 5 }
-- -------------------------------------------------------------
-- time setting
-- -------------------------------------------------------------
timeSetting OBJECT IDENTIFIER ::= { swMgmt 32 }
sysDateTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The date time of system"
::= { timeSetting 1 }
calibratePeriod OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The period (seconds) that calibrate with time server"
::= { timeSetting 2 }
timeServer1 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The first time server"
::= { timeSetting 3 }
timeServer2 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The second time server"
::= { timeSetting 4 }
daylightSaving OBJECT IDENTIFIER ::= { timeSetting 5 }
startMonth OBJECT-TYPE
SYNTAX INTEGER { na(0), jan(1), feb(2), mar(3), apr(4), may(5), jun(6), jul(7), aug(8), sep(9), oct(10), nov(11), dec(12) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting Start Month of Daylight Saving time"
::= { daylightSaving 1 }
startWeek OBJECT-TYPE
SYNTAX INTEGER { na(0), week1(1), week2(2), week3(3), week4(4), weeklast(6) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting Start Week of Daylight Saving time"
::= { daylightSaving 2 }
startDay OBJECT-TYPE
SYNTAX INTEGER { na(0), sun(1), mon(2), tue(3), wed(4), thu(5), fri(6), sat(7)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting Start Day of Daylight Saving time"
::= { daylightSaving 3 }
startHour OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting Start Hour of Daylight Saving time"
::= { daylightSaving 4 }
endMonth OBJECT-TYPE
SYNTAX INTEGER { na(0), jan(1), feb(2), mar(3), apr(4), may(5), jun(6), jul(7), aug(8), sep(9), oct(10), nov(11), dec(12) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting End Month of Daylight Saving time"
::= { daylightSaving 5 }
endWeek OBJECT-TYPE
SYNTAX INTEGER { na(0), week1(1), week2(2), week3(3), week4(4), weeklast(6) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting End Week of Daylight Saving time"
::= { daylightSaving 6 }
endDay OBJECT-TYPE
SYNTAX INTEGER { na(0), sun(1), mon(2), tue(3), wed(4), thu(5), fri(6), sat(7)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting End Day of Daylight Saving time"
::= { daylightSaving 7 }
endHour OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting End Hour of Daylight Saving time"
::= { daylightSaving 8 }
offsetHours OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting Offset Hours of Daylight Saving time"
::= { daylightSaving 9 }
enableNTPServer OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This enable NTP Server."
::= { timeSetting 6 }
clockSource OBJECT-TYPE
SYNTAX INTEGER { local(0), sntp(1), ntp(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The clock source of system"
::= { timeSetting 7 }
-- -------------------------------------------------------------
-- NTP Authentication setting
-- -------------------------------------------------------------
ntpAuthenticate OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"NTP authentication"
::= { timeSetting 8 }
ntpPeerTable OBJECT-TYPE
SYNTAX SEQUENCE OF NtpPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"NTP peer table"
::= { timeSetting 9 }
ntpPeerEntry OBJECT-TYPE
SYNTAX NtpPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"NTP peer settings"
INDEX { ntpPeerIndex }
::= { ntpPeerTable 1 }
NtpPeerEntry ::=
SEQUENCE {
ntpPeerIndex
INTEGER,
ntpPeerAddress
DisplayString,
ntpPeerAuthenticate
INTEGER,
ntpPeerAuthenticateKeyid
INTEGER
}
ntpPeerIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"NTP peer index"
::= { ntpPeerEntry 1 }
ntpPeerAddress OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"NTP peer address"
::= { ntpPeerEntry 2 }
ntpPeerAuthenticate OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"NTP authentication"
::= { ntpPeerEntry 3 }
ntpPeerAuthenticateKeyid OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"NTP authentication key Id"
::= { ntpPeerEntry 4 }
ntpAuthenticateKeyTable OBJECT-TYPE
SYNTAX SEQUENCE OF NtpAuthenticateKeyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"NTP authenticate key table"
::= { timeSetting 10 }
ntpAuthenticateKeyEntry OBJECT-TYPE
SYNTAX NtpAuthenticateKeyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"NTP authenticate key settings"
INDEX { ntpAuthenticateKeyIndex }
::= { ntpAuthenticateKeyTable 1 }
NtpAuthenticateKeyEntry ::=
SEQUENCE {
ntpAuthenticateKeyIndex
INTEGER,
ntpAuthenticateKeyID
INTEGER,
ntpAuthenticateKeyString
DisplayString,
ntpAuthenticateKeyTrusted
INTEGER
}
ntpAuthenticateKeyIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"NTP authenticate key index"
::= { ntpAuthenticateKeyEntry 1 }
ntpAuthenticateKeyID OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"NTP authenticate key id"
::= { ntpAuthenticateKeyEntry 2 }
ntpAuthenticateKeyString OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"NTP authenticate key string"
::= { ntpAuthenticateKeyEntry 3 }
ntpAuthenticateKeyTrusted OBJECT-TYPE
SYNTAX INTEGER { distrust(0), trusted(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"NTP authenticate key trusted"
::= { ntpAuthenticateKeyEntry 4 }
-- -------------------------------------------------------------
-- TurboRing Dip Switch setting
-- -------------------------------------------------------------
dipSwitchSetting OBJECT IDENTIFIER ::= { swMgmt 34 }
dipSwitchEnableTurboRing OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable TurboRing Dip Switch functions"
::= { dipSwitchSetting 1 }
dipSwitchTurboRingPole OBJECT-TYPE
SYNTAX INTEGER { off(0), on(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The TurboRing Pole status of Dip switch."
::= { dipSwitchSetting 2 }
dipSwitchRingCouplingPole OBJECT-TYPE
SYNTAX INTEGER { off(0), on(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Ring Coupling Pole status of Dip switch."
::= { dipSwitchSetting 3 }
dipSwitchRingMasterPole OBJECT-TYPE
SYNTAX INTEGER { off(0), on(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Ring Master Pole status of Dip switch."
::= { dipSwitchSetting 4 }
-- -------------------------------------------------------------
-- Auto-Backup Media setting
-- -------------------------------------------------------------
backupMediaSetting OBJECT IDENTIFIER ::= { swMgmt 35 }
abc02Status OBJECT-TYPE
SYNTAX INTEGER { device-not-present(0), unauthorized-media(1), detecting(2), working(3), ready-and-removable(4) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current status of ABC-02"
::= { backupMediaSetting 2 }
abc02AutoImportConfig OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Auto load configuration from ABC to system when boot up"
::= { backupMediaSetting 3 }
abc02AutoExportConfig OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Auto backup to ABC-02 when configuration change"
::= { backupMediaSetting 4 }
abc02AutoExportLog OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Auto backup of event log to prevent overwrite"
::= { backupMediaSetting 5 }
-- -------------------------------------------------------------
-- Warm Start setting
-- -------------------------------------------------------------
enableWarmStart OBJECT-TYPE
SYNTAX INTEGER
{
no(0),
yes(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable to restart MOXA ethernet switch."
::= { swMgmt 36 }
-- -------------------------------------------------------------
-- Syslog setting
-- -------------------------------------------------------------
syslogSetting OBJECT IDENTIFIER ::= { swMgmt 37 }
syslogServer1 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The syslog server 1"
::= { syslogSetting 1 }
syslogServer1port OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The syslog server 1 port"
::= { syslogSetting 2 }
syslogServer2 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The syslog server 2"
::= { syslogSetting 3 }
syslogServer2port OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The syslog server 2 port"
::= { syslogSetting 4 }
syslogServer3 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The syslog server 3"
::= { syslogSetting 5 }
syslogServer3port OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The syslog server 3 port"
::= { syslogSetting 6 }
-- -------------------------------------------------------------
-- DHCP Relay Agent group
-- -------------------------------------------------------------
dhcpRelayAgentSetting OBJECT IDENTIFIER ::= { swMgmt 39 }
dhcpServer1 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The dhcp Relay Agent Server 1."
::= { dhcpRelayAgentSetting 1 }
dhcpServer2 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The dhcp Relay Agent Server 2."
::= { dhcpRelayAgentSetting 2 }
dhcpServer3 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The dhcp Relay Agent Server 3."
::= { dhcpRelayAgentSetting 3 }
dhcpServer4 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The dhcp Relay Agent Server 4."
::= { dhcpRelayAgentSetting 4 }
option82Setting OBJECT IDENTIFIER ::= { dhcpRelayAgentSetting 5 }
enableOption82 OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable DHCP Option 82"
::= { option82Setting 1 }
option82Type OBJECT-TYPE
SYNTAX INTEGER { ip(0), mac(1), client-id(2), other(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Option 82 Type selector "
::= { option82Setting 2 }
option82Value OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Option 82 Type Value"
::= { option82Setting 3 }
option82ValueDisplay OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Option 82 Type Value Display"
::= { option82Setting 4 }
dhcpFunctionTable OBJECT-TYPE
SYNTAX SEQUENCE OF DhcpFunctionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"DHCP Function Table."
::= { dhcpRelayAgentSetting 6 }
dhcpFunctionEntry OBJECT-TYPE
SYNTAX DhcpFunctionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"DHCP Function Table Entry."
INDEX { dhcpPortIndex }
::= { dhcpFunctionTable 1 }
DhcpFunctionEntry ::=
SEQUENCE {
dhcpPortIndex
INTEGER,
circuitID
DisplayString,
option82Enable
INTEGER
}
dhcpPortIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The DHCP Port Index."
::= { dhcpFunctionEntry 1 }
circuitID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Circuit ID."
::= { dhcpFunctionEntry 2 }
option82Enable OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This enable option 82 of the port."
::= { dhcpFunctionEntry 3 }
-- -------------------------------------------------------------
-- Power over Ethernet(POE) Function
-- -------------------------------------------------------------
poeSetting OBJECT IDENTIFIER ::= { swMgmt 40 }
-- PoE System Setting
poeSystemSetting OBJECT IDENTIFIER ::= { poeSetting 9 }
poeSysPowerEnable OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"PoE system power enable."
::= { poeSystemSetting 1 }
poeSysPowerThreshold OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"PoE system power threshold."
::= { poeSystemSetting 2 }
poeSysThresholdCutOff OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"PoE system power threshold cut off."
::= { poeSystemSetting 3 }
poeSysAllocatedPower OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"PoE system allocated power."
::= { poeSystemSetting 4 }
poeSysMeasuredPower OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"PoE system measured power."
::= { poeSystemSetting 5 }
poeSysPowerBudget OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"PoE system power budget."
::= { poeSystemSetting 7 }
-- PoE Port Setting
poePortTable OBJECT-TYPE
SYNTAX SEQUENCE OF PoePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Poe Port Function Table."
::= { poeSetting 3 }
poePortEntry OBJECT-TYPE
SYNTAX PoePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Poe Port Function Table Entry."
INDEX { poePortIndex }
::= { poePortTable 1 }
PoePortEntry ::=
SEQUENCE {
poePortIndex
INTEGER,
poePortEnable
INTEGER,
poePowerOutputMode
INTEGER,
powerLimit
INTEGER,
poePortLegacyPdDetect
INTEGER,
poePortPowerPriority
INTEGER,
pdfailure
INTEGER,
pdipaddr
DisplayString,
pdNoResponseTimeout
INTEGER,
pdPollingInterval
INTEGER,
pdNoResponseAction
INTEGER,
poeporttimetabling
INTEGER
}
poePortIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"PoE port index."
::= { poePortEntry 1 }
poePortEnable OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"PoE port Enable."
::= { poePortEntry 2 }
powerLimit OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"PoE Port Power Budget"
::= { poePortEntry 4 }
pdfailure OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"PD check Enable per port."
::= { poePortEntry 5 }
pdipaddr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"PD ip address."
::= { poePortEntry 6 }
pdPollingInterval OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"PD check interval"
::= { poePortEntry 7 }
poeporttimetabling OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"PoE port timetabling"
::= { poePortEntry 8 }
poePortLegacyPdDetect OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"PoE port legacy PD detection"
::= { poePortEntry 9 }
pdNoResponseTimeout OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"No response timeout times for PD."
::= { poePortEntry 10 }
pdNoResponseAction OBJECT-TYPE
SYNTAX INTEGER { noAction(0), rebootPD(1), powerOffPD(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"PD no response action."
::= { poePortEntry 11 }
poePowerOutputMode OBJECT-TYPE
SYNTAX INTEGER { auto(0), highPower(1), force(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"PoE port Power Output Mode."
::= { poePortEntry 12 }
poePortPowerPriority OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"PoE port Power priority"
::= { poePortEntry 13 }
-- PoE Timetabling Table
poeTimeTable OBJECT-TYPE
SYNTAX SEQUENCE OF PoeTimeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"PoE Time Table."
::= { poeSetting 5 }
poeTimeEntry OBJECT-TYPE
SYNTAX PoeTimeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"PoE Time Table Entry."
INDEX { poeTPortIndex, poeWeekDay }
::= { poeTimeTable 1 }
PoeTimeEntry ::=
SEQUENCE {
poeTPortIndex
INTEGER,
poeWeekDay
INTEGER,
poeDayEnable
INTEGER,
poeDayStart
INTEGER,
poeDayStop
INTEGER
}
poeTPortIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"port Index for time table."
::= { poeTimeEntry 1 }
poeWeekDay OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"day index for a week."
::= { poeTimeEntry 2 }
poeDayEnable OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or not for one day."
::= { poeTimeEntry 3 }
poeDayStart OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"PoE Port Start Time"
::= { poeTimeEntry 4 }
poeDayStop OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"PoE Port Stop Time"
::= { poeTimeEntry 5 }
-- PoE Status Table
poeStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF PoeStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"PoE Status Table."
::= { poeSetting 6 }
poeStatusEntry OBJECT-TYPE
SYNTAX PoeStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"PoE Status Table Entry."
INDEX { poePortIndex}
::= { poeStatusTable 1 }
PoeStatusEntry ::=
SEQUENCE {
poePortStatus
INTEGER,
poePortConsumption
INTEGER,
poePortVoltage
INTEGER,
poePortCurrent
INTEGER,
poePortPowerOutput
INTEGER,
poePortClass
INTEGER,
poePortPdFailCheck
INTEGER,
poePortPdStatusDescription
INTEGER
}
poePortStatus OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"PoE port Status."
::= { poeStatusEntry 1 }
poePortConsumption OBJECT-TYPE
SYNTAX INTEGER { na(-1)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"PoE port Consumption"
::= { poeStatusEntry 2}
poePortVoltage OBJECT-TYPE
SYNTAX INTEGER { na(-1)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"PoE port Voltage"
::= { poeStatusEntry 3 }
poePortCurrent OBJECT-TYPE
SYNTAX INTEGER { na(-1)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"PoE port Current"
::= { poeStatusEntry 4 }
poePortPowerOutput OBJECT-TYPE
SYNTAX INTEGER { off(0), on(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"PoE port power output status."
::= { poeStatusEntry 5 }
poePortClass OBJECT-TYPE
SYNTAX INTEGER { unknown(-1), na(-2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"PoE port class."
::= { poeStatusEntry 6 }
poePortPdFailCheck OBJECT-TYPE
SYNTAX INTEGER { notAlive(0), alive(1), disable(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"PoE port PD fail check status."
::= { poeStatusEntry 7 }
poePortPdStatusDescription OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
notPresent(1),
powered(2),
nic(3),
fault(4),
legacyPowered(5),
potentialLegacyPD(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"PoE port status description."
::= { poeStatusEntry 8 }
-- -------------------------------------------------------------
-- PTP Setting
-- -------------------------------------------------------------
ieee1588Setting OBJECT IDENTIFIER ::= { swMgmt 41 }
ptpv1Setting OBJECT IDENTIFIER ::= { ieee1588Setting 1 }
enablePtpv1 OBJECT-TYPE
SYNTAX INTEGER {disable(0),enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This enable the PTP functon."
::= { ptpv1Setting 1 }
clockModev1 OBJECT-TYPE
SYNTAX INTEGER {
v1BC(0),
v2E2E2stepTC(1),
v2P2PTC(3),
v2E2EBC(4),
v2P2PBC(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the clock mode of the PTP clock."
::= { ptpv1Setting 2 }
syncIntervalv1 OBJECT-TYPE
SYNTAX INTEGER {
oneSec(0),
twoSec(1),
fourSec(2),
eightSec(3),
sixteenSec(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the logSyncInterval of the PTP clock."
::= { ptpv1Setting 3 }
subDomainNamev1 OBJECT-TYPE
SYNTAX INTEGER {dflt(0),alt1(1),alt2(2),alt3(3)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The subdomain name of the PTP clock."
::= { ptpv1Setting 4 }
preferMasterv1 OBJECT-TYPE
SYNTAX INTEGER {false(0),true(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This enable the PTP prefer master function."
::= { ptpv1Setting 5 }
ptpv2Setting OBJECT IDENTIFIER ::= { ieee1588Setting 2 }
enablePtp OBJECT-TYPE
SYNTAX INTEGER {disable(0),enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This enable the PTP functon."
::= { ptpv2Setting 1 }
clockMode OBJECT-TYPE
SYNTAX INTEGER {
v1BC(0),
v2E2E2stepTC(1),
v2P2PTC(3),
v2E2EBC(4),
v2P2PBC(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the clock mode of the PTP clock."
::= { ptpv2Setting 2 }
transport OBJECT-TYPE
SYNTAX INTEGER {ieee802dot3(0),ipv4(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the transport mode of the PTP clock."
::= { ptpv2Setting 3 }
syncInterval OBJECT-TYPE
SYNTAX INTEGER {
t128msec(-3),
t256msec(-2),
t512msec(-1),
t1sec(0),
t2sec(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the logSyncInterval of the PTP clock."
::= { ptpv2Setting 4 }
logMinDelayReqInterval OBJECT-TYPE
SYNTAX INTEGER {t1sec(0),t2sec(1),t4sec(2),t8sec(3),t16sec(4),t32sec(5)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the logMinDelayReqInterval of the PTP clock."
::= { ptpv2Setting 5 }
logMinPdelayReqInterval OBJECT-TYPE
SYNTAX INTEGER {
t512msec(-1),
t1sec(0),
t2sec(1),
t4sec(2),
t8sec(3),
t16sec(4),
t32sec(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the logMinPdelayReqInterval of the PTP clock."
::= { ptpv2Setting 6 }
logAnnounceInterval OBJECT-TYPE
SYNTAX INTEGER {t1sec(0),t2sec(1),t4sec(2),t8sec(3),t16sec(4)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the logAnnounceInterval of the PTP clock."
::= { ptpv2Setting 7 }
announceReceiptTimeout OBJECT-TYPE
SYNTAX INTEGER (2..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the announceReceiptTimeout of the PTP clock."
::= { ptpv2Setting 8 }
priority1 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the priority1 of the PTP clock."
::= { ptpv2Setting 9 }
priority2 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the priority2 of the PTP clock."
::= { ptpv2Setting 10 }
clockClass OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the clockClass of the PTP clock."
::= { ptpv2Setting 11 }
domainNumber OBJECT-TYPE
SYNTAX INTEGER {dflt(0),alt1(1),alt2(2),alt3(3)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The domain number of the PTP clock."
::= { ptpv2Setting 12 }
localUtcOffset OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the UTC offset of the local PTP clock."
::= { ptpv2Setting 13 }
localUtcOffsetValid OBJECT-TYPE
SYNTAX INTEGER {false(0),true(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the UTC offset valid of the local PTP clock."
::= { ptpv2Setting 14 }
localLeap59 OBJECT-TYPE
SYNTAX INTEGER {false(0),true(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the leap59 of the local PTP clock."
::= { ptpv2Setting 15 }
localLeap61 OBJECT-TYPE
SYNTAX INTEGER {false(0),true(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the leap61 of the local PTP clock."
::= { ptpv2Setting 16 }
localPtpTimescale OBJECT-TYPE
SYNTAX INTEGER {arb(0),ptp(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the timescale of the local PTP clock."
::= { ptpv2Setting 17 }
localArbTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the ARB time of the local PTP clock."
::= { ptpv2Setting 18 }
ptpv1Status OBJECT IDENTIFIER ::= { ieee1588Setting 3 }
offsetToMasterv1 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The offset to master for nsec."
::= { ptpv1Status 1 }
meanPathDelayv1 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mean path delay of the PTP clock."
::= { ptpv1Status 2 }
grandMasterUuidv1 OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The grand master UUID address of the PTP clock."
::= { ptpv1Status 3 }
parentUuidv1 OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The parent master UUID address of the PTP clock."
::= { ptpv1Status 4 }
clockStratumv1 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The clock stratum of the PTP clock."
::= { ptpv1Status 5 }
clockIdentifierv1 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The clock identifier of the PTP clock."
::= { ptpv1Status 6 }
ptpv2Status OBJECT IDENTIFIER ::= { ieee1588Setting 4 }
offsetToMaster OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The offset to master for nsec."
::= { ptpv2Status 1 }
meanPathDelay OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mean path delay of the PTP clock."
::= { ptpv2Status 2 }
parentIdentity OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The parent identity of the PTP clock."
::= { ptpv2Status 3 }
grandmasterIdentity OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The grandmaster identity of the PTP clock."
::= { ptpv2Status 4 }
grandmasterClockClass OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The grandmaster clockClass of the PTP clock."
::= { ptpv2Status 5 }
grandmasterClockAccuracy OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The grandmaster clockAccuracy of the PTP clock."
::= { ptpv2Status 6 }
grandmasterPriority1 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The grandmaster priority1 of the PTP clock."
::= { ptpv2Status 7 }
grandmasterPriority2 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The grandmaster priority2 of the PTP clock."
::= { ptpv2Status 8 }
stepsRemoved OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The steps removed of the PTP clock."
::= { ptpv2Status 9 }
currentUtcOffset OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current utc offset of the PTP clock."
::= { ptpv2Status 10 }
currentUtcOffsetValid OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current utc offset valid flag of the PTP clock."
::= { ptpv2Status 11 }
leap59 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The leap59 of the PTP clock."
::= { ptpv2Status 12 }
leap61 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The leap61 of the PTP clock."
::= { ptpv2Status 13 }
ptpTimescale OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ptp timescale of the PTP clock."
::= { ptpv2Status 14 }
timesource OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The timesource of the PTP clock."
::= { ptpv2Status 15 }
ptpPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF PtpPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ptp port table."
::= { ieee1588Setting 5 }
ptpPortEntry OBJECT-TYPE
SYNTAX PtpPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ptp port entry."
INDEX { ptpPortIndex }
::= { ptpPortTable 1 }
PtpPortEntry ::=
SEQUENCE {
ptpPortIndex
INTEGER,
ptpPortEnable
INTEGER,
ptpPortStatus
INTEGER
}
ptpPortIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ptp port index."
::= { ptpPortEntry 1 }
ptpPortEnable OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This enable the ptp port."
::= { ptpPortEntry 2 }
ptpPortStatus OBJECT-TYPE
SYNTAX INTEGER {
ptpInitializing(0),
ptpFaulty(1),
ptpDisabled(2),
ptpListening(3),
ptpPreMaster(4),
ptpMaster(5),
ptpPassive(6),
ptpUncalibrated(7),
ptpSlave(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This port status of the PTP clock."
::= { ptpPortEntry 3 }
-- -------------------------------------------------------------
-- swTraps group
-- -------------------------------------------------------------
mibNotificationsPrefix OBJECT IDENTIFIER
::= { edsp506e 0 }
varconfigChangeTrap OBJECT-TYPE
SYNTAX INTEGER {
none(1), -- no config change happened
configChanged(2) -- config changed
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The configuration has been changed."
::= { swTraps 1 }
configChangeTrap NOTIFICATION-TYPE
OBJECTS { varconfigChangeTrap }
STATUS current
DESCRIPTION
"The configuration has been changed."
::= { mibNotificationsPrefix 1 }
varpower1Trap OBJECT-TYPE
SYNTAX INTEGER {
none(1), -- no power on/off
on2off(2), -- power on to power off
off2on(3) -- power off to power on
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The power on/off changed."
::= { swTraps 2 }
power1Trap NOTIFICATION-TYPE
OBJECTS { varpower1Trap }
STATUS current
DESCRIPTION
"The power on/off changed."
::= { mibNotificationsPrefix 2 }
varpower2Trap OBJECT-TYPE
SYNTAX INTEGER {
none(1), -- no power on/off
on2off(2), -- power on to power off
off2on(3) -- power off to power on
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The power on/off changed."
::= { swTraps 3 }
power2Trap NOTIFICATION-TYPE
OBJECTS { varpower2Trap }
STATUS current
DESCRIPTION
"The power on/off changed."
::= { mibNotificationsPrefix 3 }
vartrafficOverloadTrap OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ethernet port's traffic loading exceeds the pre-defined value."
::= { swTraps 4 }
trafficOverloadTrap NOTIFICATION-TYPE
OBJECTS { vartrafficOverloadTrap }
STATUS current
DESCRIPTION
"The ethernet port's traffic loading exceeds the pre-defined value."
::= { mibNotificationsPrefix 4 }
varredundancyTopologyChangedTrap OBJECT-TYPE
SYNTAX INTEGER {
none(1), -- no topology change
topologyChanged(2), -- topology changed
topologyChangedTurboChainHead(3), -- topology change turboChain head
topologyChangedTurboChainTail(4) -- topology change turboChain tail
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The redundancy topology has been changed."
::= { swTraps 5 }
redundancyTopologyChangedTrap NOTIFICATION-TYPE
OBJECTS { varredundancyTopologyChangedTrap }
STATUS current
DESCRIPTION
"The redundancy topology has been changed."
::= { mibNotificationsPrefix 5 }
varturboRingCouplingPortChangedTrap OBJECT-TYPE
SYNTAX INTEGER {
none(1), -- no topology change
couplingPortChanged(2) -- coupling port changed
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The coupling path of Turbo Ring has been changed."
::= { swTraps 6 }
turboRingCouplingPortChangedTrap NOTIFICATION-TYPE
OBJECTS { varturboRingCouplingPortChangedTrap }
STATUS current
DESCRIPTION
"The coupling path of Turbo Ring has been changed."
::= { mibNotificationsPrefix 6 }
varturboRingMasterChangedTrap OBJECT-TYPE
SYNTAX INTEGER {
none(1), -- no topology change
ringMasterChanged(2) -- ring master changed
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The master of Turbo Ring has been changed."
::= { swTraps 7 }
turboRingMasterChangedTrap NOTIFICATION-TYPE
OBJECTS { varturboRingMasterChangedTrap }
STATUS current
DESCRIPTION
"The master of Turbo Ring has been changed."
::= { mibNotificationsPrefix 7 }
varturboRingMasterMismatchTrap OBJECT-TYPE
SYNTAX INTEGER {
none(1), -- no topology mismatch
ringMasterMismatch(2) -- ring master mismatch
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The master of Turbo Ring has been mismatch."
::= { swTraps 22 }
turboRingMasterMismatchTrap NOTIFICATION-TYPE
OBJECTS { varturboRingMasterChangedTrap }
STATUS current
DESCRIPTION
"The master of Turbo Ring has been mismatch."
::= { mibNotificationsPrefix 22 }
varPoEWarningTrap OBJECT-TYPE
SYNTAX INTEGER {
pdOverCurrent(1), -- PoE port over-current/short-circuit
pdCheckFail(2), -- PD Failure Check (no response)
pdPowerOn(3), -- PoE port power on
pdPowerOff(4), -- PoE port power off
exceedSystemThreshold(5),-- Exceed PoE system threshold
pseFetBad(6), -- PoE port External FET has failed
pseOverTemperature(7), -- PSE chip is over temperature
pseVeeUvlo(8), -- PSE chip VEE under voltage lockout
exceedSystemPowerBudget(9) -- Exceel PoE system power budget
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The POE warning message."
::= { swTraps 16 }
poeWarningTrap NOTIFICATION-TYPE
OBJECTS { varPoEWarningTrap }
STATUS current
DESCRIPTION
"The POE warning message."
::= { mibNotificationsPrefix 16 }
varPortLoopDetectedTrap OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The DUT port is looping."
::= { swTraps 17 }
portLoopDetectedTrap NOTIFICATION-TYPE
OBJECTS { varPortLoopDetectedTrap }
STATUS current
DESCRIPTION
"The DUT port is looping."
::= { mibNotificationsPrefix 17 }
varRateLimitedOnTrap OBJECT-TYPE
SYNTAX INTEGER
{
none(1), -- no rate limit
rateLimitON(2), -- rate limit ON
rateLimitOFF(3) -- rate limit OFF
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The DUT port is rate limit."
::= { swTraps 18 }
rateLimitedOnTrap NOTIFICATION-TYPE
OBJECTS { varRateLimitedOnTrap }
STATUS current
DESCRIPTION
"The DUT port rate limit is ON."
::= { mibNotificationsPrefix 18 }
varLLDPChgTrap OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The LLDP table is changing."
::= { swTraps 19 }
lldpChgTrap NOTIFICATION-TYPE
OBJECTS { varLLDPChgTrap }
STATUS current
DESCRIPTION
"The LLDP table is changing."
::= { mibNotificationsPrefix 19 }
varABC02WarningTrap OBJECT-TYPE
SYNTAX INTEGER
{
noEnoughSpace(1),
nnauthorizedMediaIsDetected(2),
exportConfigurationFail(3),
exportLogFail(4),
autoImportConfigurationFail(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Warning trap while specific error is occured in abc02."
::= { swTraps 20 }
abc02WarningTrap NOTIFICATION-TYPE
OBJECTS { varABC02WarningTrap }
STATUS current
DESCRIPTION
"Warning trap while specific error is occured in abc02."
::= { mibNotificationsPrefix 20 }
varUserAuthSuccessTrap OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Account authentication success."
::= { swTraps 24 }
userAuthSuccessTrap NOTIFICATION-TYPE
OBJECTS { varUserAuthSuccessTrap }
STATUS current
DESCRIPTION
"Account authentication success."
::= { mibNotificationsPrefix 24 }
varUserAuthFailTrap OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Account authentication failed."
::= { swTraps 25 }
userAuthFailTrap NOTIFICATION-TYPE
OBJECTS { varUserAuthFailTrap }
STATUS current
DESCRIPTION
"Account authentication failed."
::= { mibNotificationsPrefix 25 }
varMacStickyPortViolationPortDisableTrap OBJECT-TYPE
SYNTAX INTEGER {
none(1), -- no violation port disable
violationPortDisable(2) -- violation port disable
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of sticky Mac address on the port was over the limit. A macStickyPortViolationPortDisableTrap will contain 3 elements: port, macaddr, and vlanid."
::= { swTraps 26 }
macStickyPortViolationPortDisableTrap NOTIFICATION-TYPE
OBJECTS { varMacStickyPortViolationPortDisableTrap }
STATUS current
DESCRIPTION
"The number of sticky Mac address on the port was over the limit. A macStickyPortViolationPortDisableTrap will contain 3 elements: port, macaddr, and vlanid."
::= { mibNotificationsPrefix 26 }
varFiberWarningTrap OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Warning trap while fiber is over threshold."
::= { swTraps 28 }
fiberWarningTrap NOTIFICATION-TYPE
OBJECTS { varFiberWarningTrap }
STATUS current
DESCRIPTION
"Warning trap while fiber is over threshold."
::= { mibNotificationsPrefix 28 }
varLoggingCapacityTrap OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Warning trap while event log is over capacity threshold."
::= { swTraps 29 }
loggingCapacityTrap NOTIFICATION-TYPE
OBJECTS { varLoggingCapacityTrap }
STATUS current
DESCRIPTION
"Warning trap while event log is over capacity threshold."
::= { mibNotificationsPrefix 29 }
varUserInfoChgTrap OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Account information has been changed."
::= { swTraps 31 }
userInfoChgTrap NOTIFICATION-TYPE
OBJECTS { varUserInfoChgTrap }
STATUS current
DESCRIPTION
"Account information has been changed."
::= { mibNotificationsPrefix 31 }
varConfigImportTrap OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Configuration has been imported."
::= { swTraps 32 }
configImportTrap NOTIFICATION-TYPE
OBJECTS { varConfigImportTrap }
STATUS current
DESCRIPTION
"Configuration has been imported."
::= { mibNotificationsPrefix 32 }
varRemoteAuthSuccessTrap OBJECT-TYPE
SYNTAX INTEGER {
tacacs(1),
radius(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The login authentication is successful by the remote server"
::= { swTraps 38 }
remoteAuthSuccessTrap NOTIFICATION-TYPE
OBJECTS { varRemoteAuthSuccessTrap }
STATUS current
DESCRIPTION
"The login authentication is successful by the remote server"
::= { mibNotificationsPrefix 38 }
varRemoteAuthFailTrap OBJECT-TYPE
SYNTAX INTEGER {
tacacs(1),
radius(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The login authentication is failed by the remote server"
::= { swTraps 39 }
remoteAuthFailTrap NOTIFICATION-TYPE
OBJECTS { varRemoteAuthFailTrap }
STATUS current
DESCRIPTION
"The login authentication is failed by the remote server"
::= { mibNotificationsPrefix 39 }
varEPSChangeToOn OBJECT-TYPE
SYNTAX INTEGER
{
externalPower1(1),
externalPower2(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Trap for PoE external power status(EPS) changed to on"
::= { swTraps 44 }
ePSChangeToOnTrap NOTIFICATION-TYPE
OBJECTS { varEPSChangeToOn }
STATUS current
DESCRIPTION
"Trap for PoE external power status(EPS) changed to on"
::= { mibNotificationsPrefix 44 }
varEPSChangeToOff OBJECT-TYPE
SYNTAX INTEGER
{
externalPower1(1),
externalPower2(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Trap for PoE external power status(EPS) changed to off"
::= { swTraps 45 }
ePSChangeToOffTrap NOTIFICATION-TYPE
OBJECTS { varEPSChangeToOff }
STATUS current
DESCRIPTION
"Trap for PoE external power status(EPS) changed to off"
::= { mibNotificationsPrefix 45 }
-- -------------------------------------------------------------
-- Diagnosis: LLDP Setting
-- -------------------------------------------------------------
diagnosis OBJECT IDENTIFIER ::= { swMgmt 42 }
lldpSetting OBJECT IDENTIFIER ::= { diagnosis 1 }
enableLLDP OBJECT-TYPE
SYNTAX INTEGER {disable(0),enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This enable the LLDP functon."
::= { lldpSetting 1 }
lldpMSGInterval OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The LLDP message transmit interval."
::= { lldpSetting 2 }
-- -------------------------------------------------------------
-- Industrial Protocol
-- -------------------------------------------------------------
industrialProtocol OBJECT IDENTIFIER ::= { swMgmt 47 }
eipSetting OBJECT IDENTIFIER ::= { industrialProtocol 1 }
modbusSetting OBJECT IDENTIFIER ::= { industrialProtocol 2 }
profinetioSetting OBJECT IDENTIFIER ::= { industrialProtocol 3 }
enableEtherNetIP OBJECT-TYPE
SYNTAX INTEGER {disable(0),enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This enable the EtherNet/IP functon."
::= { eipSetting 1 }
enableModbus OBJECT-TYPE
SYNTAX INTEGER {disable(0),enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This enable the Modbus functon."
::= { modbusSetting 1 }
enableProfinetIO OBJECT-TYPE
SYNTAX INTEGER {disable(0),enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This enable the PROFINET IO functon."
::= { profinetioSetting 1 }
-- -------------------------------------------------------------
-- GARP
-- -------------------------------------------------------------
garpSetting OBJECT IDENTIFIER ::= { swMgmt 45 }
leaveAllTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Leaveall Time (ms)."
::= { garpSetting 3 }
leaveTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Leave Time (ms)."
::= { garpSetting 2 }
joinTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Join Time (ms)."
::= { garpSetting 1 }
-- -------------------------------------------------------------
-- Factory Default setting
-- -------------------------------------------------------------
enableFactoryDefault OBJECT-TYPE
SYNTAX INTEGER
{
activate(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Reset all EtherDevice switch settings to factory default values"
::= { swMgmt 48 }
-- -------------------------------------------------------------
-- eventlog
-- -------------------------------------------------------------
eventlog OBJECT IDENTIFIER ::= { swMgmt 46 }
eventlogTable OBJECT-TYPE
SYNTAX SEQUENCE OF EventlogEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of eventlog."
::= { eventlog 1 }
eventlogEntry OBJECT-TYPE
SYNTAX EventlogEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table entry of eventlog."
INDEX { eventlogIndex }
::= { eventlogTable 1 }
EventlogEntry ::=
SEQUENCE {
eventlogIndex
INTEGER,
eventlogBootup
INTEGER,
eventlogDate
DisplayString,
eventlogTime
DisplayString,
eventlogUptime
DisplayString,
eventlogEvent
DisplayString
}
eventlogIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of eventlog entry."
::= { eventlogEntry 1 }
eventlogBootup OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The reboot count of the system."
::= { eventlogEntry 2 }
eventlogDate OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The date of the event occured."
::= { eventlogEntry 3 }
eventlogTime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time of the event occured."
::= { eventlogEntry 4 }
eventlogUptime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time of the event occured after booting up."
::= { eventlogEntry 5 }
eventlogEvent OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The event which occured in the system."
::= { eventlogEntry 6 }
eventlogClear OBJECT-TYPE
SYNTAX INTEGER { noop(0), clear(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To clear the eventlog, set value 1 to this field."
::= { eventlog 2 }
-- -------------------------------------------------------------
-- Access Control List
-- -------------------------------------------------------------
accessControlList OBJECT IDENTIFIER ::= { swMgmt 52 }
accessControlTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccessControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of ACL rule settings. This table is used to configure ACL rules."
::= { accessControlList 1 }
accessControlEntry OBJECT-TYPE
SYNTAX AccessControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry information of ACL table."
INDEX { aclRuleIndex }
::= { accessControlTable 1 }
AccessControlEntry ::=
SEQUENCE {
aclRuleIndex
INTEGER,
listID
INTEGER,
filterType
INTEGER,
actionFlag
INTEGER,
srcMacAddr
MacAddress,
srcMacMask
MacAddress,
dstMacAddr
MacAddress,
dstMacMask
MacAddress,
etherType
INTEGER,
vlanID
INTEGER,
srcIpAddr
IpAddress,
srcNetmask
IpAddress,
dstIpAddr
IpAddress,
dstNetmask
IpAddress,
protocolCode
INTEGER,
srcsocketPort
INTEGER,
dstsocketPort
INTEGER,
aclStatus
INTEGER
}
aclRuleIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The index of the ACL rule."
::= { accessControlEntry 1 }
listID OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The listID of the ACL rule."
::= { accessControlEntry 2 }
filterType OBJECT-TYPE
SYNTAX INTEGER {ipBase(0),macBase(1)}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of the ACL filter."
::= { accessControlEntry 3 }
actionFlag OBJECT-TYPE
SYNTAX INTEGER {permit(0),deny(1)}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The action of the ACL rule."
::= { accessControlEntry 4 }
srcMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The source MAC address of the ACL rule."
::= { accessControlEntry 5 }
srcMacMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The mask of the source MAC address in the ACL rule."
::= { accessControlEntry 6 }
dstMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The destination MAC address of the ACL rule."
::= { accessControlEntry 7 }
dstMacMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The mask of the destination MAC address in the ACL rule."
::= { accessControlEntry 8 }
etherType OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The ether type of the ACL rule."
::= { accessControlEntry 9 }
vlanID OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The VLAN ID of the ACL rule."
::= { accessControlEntry 10 }
srcIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The source IP address of the ACL rule."
::= { accessControlEntry 11 }
srcNetmask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The source IP address's mask of the ACL rule."
::= { accessControlEntry 12 }
dstIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The destination IP address of the ACL rule"
::= { accessControlEntry 13 }
dstNetmask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The destination IP address's mask of the ACL rule."
::= { accessControlEntry 14 }
protocolCode OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The protocol code of the ACL rule."
::= { accessControlEntry 15 }
srcsocketPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The source UDP/TCP port of the ACL rule."
::= { accessControlEntry 16 }
dstsocketPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The destination UDP/TCP port of the ACL rule."
::= { accessControlEntry 17 }
aclStatus OBJECT-TYPE
SYNTAX INTEGER {
active(1),
createAndGo(4),
createAndWait(5),
destroy(6)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status is active to indicate normal.
Use createAndGo to create new on multiple SET.
Use createAndWait to create new on one SET all then actvie.
Use destroy to delete this row."
::= { accessControlEntry 18 }
aclAttachmentTable OBJECT-TYPE
SYNTAX SEQUENCE OF AclAttachmentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of ACL attachment settings. This table is used to configure ACL attachment port and list name."
::= { accessControlList 2 }
aclAttachmentEntry OBJECT-TYPE
SYNTAX AclAttachmentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry information of ACL attachment table."
INDEX { aclID }
::= { aclAttachmentTable 1 }
AclAttachmentEntry ::=
SEQUENCE {
aclID
INTEGER,
ingressPort
PortList,
aclListName
DisplayString
}
aclID OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The listID of the ACL attachment entry."
::= { aclAttachmentEntry 1 }
ingressPort OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The ingress ports of the ACL attachment entry."
::= { aclAttachmentEntry 2 }
aclListName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The ACL entry name."
::= { aclAttachmentEntry 4 }
-- -------------------------------------------------------------
-- CPU Loading and Free Memory info.
-- -------------------------------------------------------------
cpuLoading5s OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"CPU Loading for the past 5 seconds in %."
::= { swMgmt 53 }
cpuLoading30s OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"CPU Loading for the past 30 seconds in %."
::= { swMgmt 54 }
cpuLoading300s OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"CPU Loading for the past 5 minutes in %."
::= { swMgmt 55 }
totalMemory OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total size of System RAM."
::= { swMgmt 56 }
freeMemory OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total size of free dynamic memory"
::= { swMgmt 57 }
usedMemory OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total size of used dynamic memory"
::= { swMgmt 58 }
memoryUsage OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The usage of memory size in %."
::= { swMgmt 59 }
ivlSwitch OBJECT-TYPE
SYNTAX INTEGER {svl(0),ivl(1)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current switch runs IVL(Independent Vlan Learning) or SVL(Shared Vlan Learning)"
::= { swMgmt 76 }
supportMacSticky OBJECT-TYPE
SYNTAX INTEGER {not-support(0), support(1)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Support MAC Sticky feature or not."
::= { swMgmt 77 }
-- -------------------------------------------------------------
-- Loop Protection info.
-- -------------------------------------------------------------
loopProtection OBJECT-TYPE
SYNTAX INTEGER {disable(0),enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This enable the Loop Protection functon."
::= { swMgmt 61 }
-- -------------------------------------------------------------
-- event settings
-- -------------------------------------------------------------
eventSettings OBJECT IDENTIFIER ::= { swMgmt 62 }
-- System Event Settings
systemEventSettingsTable OBJECT-TYPE
SYNTAX SEQUENCE OF SystemEventSettingsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The system event settings table."
::= { eventSettings 1 }
systemEventSettingsEntry OBJECT-TYPE
SYNTAX SystemEventSettingsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"System Event Settings Entry."
INDEX { systemEventIndex }
::= { systemEventSettingsTable 1 }
SystemEventSettingsEntry ::=
SEQUENCE {
systemEventIndex
INTEGER,
systemEventActive
INTEGER,
systemEventName
DisplayString,
systemEventSupport
INTEGER,
systemEventModuleEnable
INTEGER,
systemEventSeverity
INTEGER
}
systemEventIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Index of system event settings"
::= { systemEventSettingsEntry 1 }
systemEventActive OBJECT-TYPE
SYNTAX INTEGER {
inactive(0),
active(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Status of active of system event settings"
::= { systemEventSettingsEntry 2 }
systemEventName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Name of system event settings"
::= { systemEventSettingsEntry 3 }
systemEventSupport OBJECT-TYPE
SYNTAX INTEGER {
none(0),
support-SNMPTrap-only(1),
support-Email-only(2),
support-SNMP-Trap-Email(3),
support-Syslog-only(4),
support-SNMPTrap-Syslog(5),
support-Email-Syslog(6),
support-SNMPTrap-Email-Syslog(7),
support-Relay1-only(8),
support-SNMPTrap-Relay1(9),
support-Email-Relay1(10),
support-SNMPTrap-Email-Relay1(11),
support-Syslog-Relay1(12),
support-SNMPTrap-Syslog-Relay1(13),
support-Email-Syslog-Relay1(14),
support-SNMPTrap-Email-Syslog-Relay1(15),
support-Relay2-only(16),
support-SNMPTrap-Relay2(17),
support-Email-Relay2(18),
support-SNMPTrap-Email-Relay2(19),
support-Syslog-Relay2(20),
support-SNMPTrap-Syslog-Relay2(21),
support-Email-Syslog-Relay2(22),
support-SNMPTrap-Email-Syslog-Relay2(23),
support-Relay1-Relay2(24),
support-SNMPTrap-Relay1-Relay2(25),
support-Syslog-Relay1-Relay2(28),
support-Email-Syslog-Relay1-Relay2(30),
support-all-SNMPTrap-Email-Syslog-Relay1-Relay2(31)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status of support modules of system event settings."
::= { systemEventSettingsEntry 4 }
systemEventModuleEnable OBJECT-TYPE
SYNTAX INTEGER {
none(0),
enable-SNMPTrap-only(1),
enable-Email-only(2),
enable-SNMPTrap-Email(3),
enable-Syslog-only(4),
enable-SNMPTrap-Syslog(5),
enable-Email-Syslog(6),
enable-SNMPTrap-Email-Syslog(7),
enable-Relay1-only(8),
enable-SNMPTrap-Relay1(9),
enable-Email-Relay1(10),
enable-SNMPTrap-Email-Relay1(11),
enable-Syslog-Relay1(12),
enable-SNMPTrap-Syslog-Relay1(13),
enable-Email-Syslog-Relay1(14),
enable-SNMPTrap-Email-Syslog-Relay1(15),
enable-Relay2-only(16),
enable-SNMPTrap-Relay2(17),
enable-Email-Relay2(18),
enable-SNMPTrap-Email-Relay2(19),
enable-Syslog-Relay2(20),
enable-SNMPTrap-Syslog-Relay2(21),
enable-Email-Syslog-Relay2(22),
enable-SNMPTrap-Email-Syslog-Relay2(23),
enable-Relay1-Relay2(24),
enable-SNMPTrap-Relay1-Relay2(25),
enable-Syslog-Relay1-Relay2(28),
enable-Email-Syslog-Relay1-Relay2(30),
enable-All-SNMPTrap-Email-Syslog-Relay1-Relay2(31)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Status of enable of system event settings."
::= { systemEventSettingsEntry 5 }
systemEventSeverity OBJECT-TYPE
SYNTAX INTEGER {
emergency(0),
alert(1),
critical(2),
error(3),
warning(4),
notice(5),
information(6),
debug(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Severity of system event settings"
::= { systemEventSettingsEntry 6 }
-- Port Event Settings
portEventSettingsTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortEventSettingsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port event settings table."
::= { eventSettings 2 }
portEventSettingsEntry OBJECT-TYPE
SYNTAX PortEventSettingsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Port Event Settings Entry."
INDEX { portEventIndex }
::= { portEventSettingsTable 1 }
PortEventSettingsEntry ::=
SEQUENCE {
portEventIndex
INTEGER,
portEventLabel
DisplayString,
portEventActive
INTEGER,
portEventEnable
INTEGER,
portEventTrafficThreshold
INTEGER,
portEventTrafficDuration
INTEGER,
portEventModuleEnable
INTEGER,
portEventSeverity
INTEGER
}
portEventIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Index of port event settings"
::= { portEventSettingsEntry 1 }
portEventLabel OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Label of portEventIndex"
::= { portEventSettingsEntry 2 }
portEventActive OBJECT-TYPE
SYNTAX INTEGER {
inactive(0),
active(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Status of active of port event settings"
::= { portEventSettingsEntry 3 }
portEventEnable OBJECT-TYPE
SYNTAX INTEGER {
none(0),
enable-LinkOn-only(1),
enable-LinkOff-only(2),
enable-LinkOn-LinkOff(3),
enable-TrafficOverload-only(4),
enable-LinkOn-TrafficOverload(5),
enable-LinkOff-TrafficOverload(6),
enable-All-LinkOn-LinkOff-TrafficOverload(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Status of event enable of port event settings"
::= { portEventSettingsEntry 4 }
portEventTrafficThreshold OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Threshold of Traffic-Overload in percentage(%)"
::= { portEventSettingsEntry 5 }
portEventTrafficDuration OBJECT-TYPE
SYNTAX INTEGER (1..300)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Duration of Traffic-Overload in secs(s)"
::= { portEventSettingsEntry 6 }
portEventModuleEnable OBJECT-TYPE
SYNTAX INTEGER {
none(0),
enable-SNMPTrap-only(1),
enable-Email-only(2),
enable-SNMPTrap-Email(3),
enable-Syslog-only(4),
enable-SNMPTrap-Syslog(5),
enable-Email-Syslog(6),
enable-SNMPTrap-Email-Syslog(7),
enable-Relay1-only(8),
enable-SNMPTrap-Relay1(9),
enable-Email-Relay1(10),
enable-SNMPTrap-Email-Relay1(11),
enable-Syslog-Relay1(12),
enable-SNMPTrap-Syslog-Relay1(13),
enable-Email-Syslog-Relay1(14),
enable-SNMPTrap-Email-Syslog-Relay1(15),
enable-Relay2-only(16),
enable-SNMPTrap-Relay2(17),
enable-Email-Relay2(18),
enable-SNMPTrap-Email-Relay2(19),
enable-Syslog-Relay2(20),
enable-SNMPTrap-Syslog-Relay2(21),
enable-Email-Syslog-Relay2(22),
enable-SNMPTrap-Email-Syslog-Relay2(23),
enable-Relay1-Relay2(24),
enable-SNMPTrap-Relay1-Relay2(25),
enable-Syslog-Relay1-Relay2(28),
enable-Email-Syslog-Relay1-Relay2(30),
enable-All-SNMPTrap-Email-Syslog-Relay1-Relay2(31)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Status of module enable of port event settings."
::= { portEventSettingsEntry 7 }
portEventSeverity OBJECT-TYPE
SYNTAX INTEGER {
emergency(0),
alert(1),
critical(2),
error(3),
warning(4),
notice(5),
information(6),
debug(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Severity of port event settings"
::= { portEventSettingsEntry 8 }
-- -------------------------------------------------------------
-- Management Interface
-- -------------------------------------------------------------
managementInterface OBJECT IDENTIFIER ::= { swMgmt 63 }
httpEnable OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Status of http service"
::= { managementInterface 1 }
httpPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Port of http service"
::= { managementInterface 2 }
sslEnable OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Status of ssl(https) service"
::= { managementInterface 3 }
sslPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Port of ssl(https) service"
::= { managementInterface 4 }
telnetEnable OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Status of telnet service"
::= { managementInterface 5 }
telnetPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Port of telnet service"
::= { managementInterface 6 }
sshEnable OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Status of ssh service"
::= { managementInterface 7 }
sshPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Port of telnet service"
::= { managementInterface 8 }
mgmtInterfaceAutoLogout OBJECT-TYPE
SYNTAX INTEGER (0..1440)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Web Timeout (Mins). Set 0 to disable"
::= { managementInterface 9 }
snmpdEnable OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Status of snmp agent"
::= { managementInterface 10 }
snmpdPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Port of snmp agent"
::= { managementInterface 11 }
moxaUtilityServiceEnable OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Status of moxa utility service"
::= { managementInterface 12 }
moxaUtilityServicePort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Port of moxa utility service"
::= { managementInterface 13 }
httpMaxLoginUsers OBJECT-TYPE
SYNTAX INTEGER (1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure HTTP/HTTPS maximum login users"
::= { managementInterface 14 }
telnetMaxLoginUsers OBJECT-TYPE
SYNTAX INTEGER (1..5)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure TELNET/SSH maximum login users"
::= { managementInterface 15 }
moxaNewCmdEnable OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Status of new moxa utility service"
::= { managementInterface 16 }
-- -------------------------------------------------------------
-- Password Policy.
-- -------------------------------------------------------------
passwordPolicy OBJECT IDENTIFIER ::= { swMgmt 70 }
pwdMinLength OBJECT-TYPE
SYNTAX INTEGER (4..16)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure the minimum password length."
::= { passwordPolicy 1 }
pwdComplexityCheckEnable OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable password complexity check."
::= { passwordPolicy 2 }
pwdComplexityCheckDigitEnable OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Add password complexity check with digit."
::= { passwordPolicy 3 }
pwdComplexityCheckAlphabetEnable OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Add password complexity check with alphabet."
::= { passwordPolicy 4 }
pwdComplexityCheckSpecialCharEnable OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Add password complexity check with special-characters."
::= { passwordPolicy 5 }
-- -------------------------------------------------------------
-- Login Lockout.
-- -------------------------------------------------------------
loginLockout OBJECT IDENTIFIER ::= { swMgmt 71 }
loginFailureLockoutEnable OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable login failure lockout."
::= { loginLockout 1 }
loginFailureLockoutRetrys OBJECT-TYPE
SYNTAX INTEGER (1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure login failure lockout retry threshhold."
::= { loginLockout 2 }
loginFailureLockoutTime OBJECT-TYPE
SYNTAX INTEGER (1..60)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure login failure lockout time.(Min)"
::= { loginLockout 3 }
-- -------------------------------------------------------------
-- System Notification Message.
-- -------------------------------------------------------------
systemNotifyMessage OBJECT IDENTIFIER ::= { swMgmt 72 }
httpLoginMessage OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure HTTP/HTTPS login message."
::= { systemNotifyMessage 1 }
httpLoginFailureMessage OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure HTTP/HTTPS login failure message."
::= { systemNotifyMessage 2 }
-- -------------------------------------------------------------
-- Audit and Log Management.
-- -------------------------------------------------------------
syslogManagement OBJECT IDENTIFIER ::= { swMgmt 73 }
loggingCapacityThreshold OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure event log capacity warning threshold."
::= { syslogManagement 1 }
loggingCapacityTrapWarningEnable OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable event log capacity SNMP trap warning."
::= { syslogManagement 2 }
loggingCapacityEmailWarningEnable OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable event log capacity email warning."
::= { syslogManagement 3 }
loggingOversizeAction OBJECT-TYPE
SYNTAX INTEGER { overwrite(0), stoprecord(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set event log over-size action."
::= { syslogManagement 4 }
-- -------------------------------------------------------------
-- Certificate Management.
-- -------------------------------------------------------------
certificateManagement OBJECT IDENTIFIER ::= { swMgmt 74 }
sslCertGen OBJECT-TYPE
SYNTAX INTEGER { na(0), generate(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Generate SSL certificate."
::= { certificateManagement 1 }
sshKeyGen OBJECT-TYPE
SYNTAX INTEGER { na(0), generate(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Generate SSH host key."
::= { certificateManagement 2 }
-- -------------------------------------------------------------
-- Switch Locator LED.
-- -------------------------------------------------------------
switchLocator OBJECT IDENTIFIER ::= { swMgmt 64 }
blinkingLocatorLED OBJECT-TYPE
SYNTAX INTEGER{
off(0),
on(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Blinking switch locator LED."
::= { switchLocator 1 }
disableLocatorLEDTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure back-off time for disable switch locator LED."
::= { switchLocator 2 }
-- -------------------------------------------------------------
-- New Web UI info.
-- -------------------------------------------------------------
uiVersion OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"New UI Version"
::= { swMgmt 65 }
-- -------------------------------------------------------------
-- Serial Number info.
-- -------------------------------------------------------------
serialNumber OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Serial Number"
::= { swMgmt 78 }
-- -------------------------------------------------------------
-- Configuration File Encryption Setting.
-- -------------------------------------------------------------
configEncryptEnable OBJECT-TYPE
SYNTAX INTEGER {disable(0),enable(1)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Configuration File Encryption Setting."
::= { swMgmt 79 }
END
Reference in New Issue View Git Blame Copy Permalink