mibs/MIBS/nokia/ALCATEL-IND1-GVRP-MIB
2023-12-05 12:25:34 +01:00

794 lines
30 KiB
Plaintext

ALCATEL-IND1-GVRP-MIB DEFINITIONS ::= BEGIN
IMPORTS
Counter32, Unsigned32, MODULE-IDENTITY, OBJECT-IDENTITY,
OBJECT-TYPE, NOTIFICATION-TYPE
FROM SNMPv2-SMI
VlanBitmap FROM ALCATEL-IND1-VLAN-STP-MIB
InterfaceIndex FROM IF-MIB
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
softentIND1Gvrp FROM ALCATEL-IND1-BASE;
alcatelIND1GVRPMIB MODULE-IDENTITY
LAST-UPDATED "200707020000Z"
ORGANIZATION "Alcatel - Architects Of An Internet World"
CONTACT-INFO
"Please consult with Customer Service to insure the most appropriate
version of this document is used with the products in question:
Alcatel-Lucent, Enterprise Solutions Division
(Formerly Alcatel Internetworking, Incorporated)
26801 West Agoura Road
Agoura Hills, CA 91301-5122
United States Of America
Telephone: North America +1 800 995 2696
Latin America +1 877 919 9526
Europe +31 23 556 0100
Asia +65 394 7933
All Other +1 818 878 4507
Electronic Mail: support@ind.alcatel.com
World Wide Web: http://alcatel-lucent.com/wps/portal/enterprise
File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs"
DESCRIPTION
"This module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
For the Birds Of Prey Product Line
GVRP for the distribution of VLAN configuration information.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 1995-2007 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE"
REVISION "200707020000Z"
DESCRIPTION
"The GVRP MIB defines a set of GVRP related management objects for VLANs
and ports that support GARP VLAN registration protocol (GVRP). GVRP as a
protocol provides mechanisms to dynamically learn and further propagate VLAN
membership information across a bridged network, as recommended in standards
IEEE Draft Std. P802.1Q-REV/D5.0 and 802.1D 2004 Editions.
This GVRP MIB extends already existing AOS-REUSE IETF_Q_BRIDGE MIB which is based on
RFC 2674 (Bridges with Traffic Classes, Multicast Filtering and Virtual LAN
Extensions), to accomodate the proprietary behavior of the device and for
defining objects as recommended by standards.
This MIB comprises proprietary managed objects as well the objects required
for conforming to the standards. However, the set of objects defined in this MIB,
do not duplicate, nor conflict with any MIB object definitions defined in the
IETF_Q_MIB."
::= { softentIND1Gvrp 1}
-- --------------------------------------------------------------
alcatelIND1GVRPMIBObjects OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For GVRP
Subsystem Managed Objects."
::= { alcatelIND1GVRPMIB 1 }
alcatelIND1GVRPMIBConformance OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch for GVRP Module MIB Subsystem Conformance Information."
::= { alcatelIND1GVRPMIB 2 }
alcatelIND1GVRPMIBGroups OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch for GVRP Module MIB Subsystem Units of Conformance."
::= { alcatelIND1GVRPMIBConformance 1 }
alcatelIND1GVRPMIBCompliances OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch for GVRP Module MIB Subsystem Compliance Statements."
::= { alcatelIND1GVRPMIBConformance 2 }
-- --------------------------------------------------------------
-- --------------------------------------------------------------
-- GVRP MIB
-- --------------------------------------------------------------
alaGvrpGlobalClearStats OBJECT-TYPE
SYNTAX INTEGER {
default(0),
reset(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Defines the global clear statistics control for GVRP.
The value reset (1) indicates that GVRP should clear all statistic
counters related to all ports in the system. By default, this object
contains a zero value."
DEFVAL { default }
::= { alcatelIND1GVRPMIBObjects 1 }
alaGvrpTransparentSwitching OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Defines the behavior when GVRP is globally disabled on a device.
The value enabled (1) indicates that device behaves like a GVRP
transparent device and the GVRP frames will be flooded transparently.
Value disabled (2) disabled indicates that the device will not flood
GVRP frames and will simply discard the received GVRP frames."
DEFVAL { disabled }
::= { alcatelIND1GVRPMIBObjects 2 }
alaGvrpMaxVlanLimit OBJECT-TYPE
SYNTAX INTEGER (32 .. 4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Defines the maximum number of dynamic VLANs that can be created on the system by GVRP.
If the number of VLANs created by GVRP reaches this limit, the system will gradually
prevent GVRP from creating additional VLANs."
DEFVAL { 256 }
::= { alcatelIND1GVRPMIBObjects 3 }
alaGvrpVlanConflictInfo OBJECT-TYPE
SYNTAX OCTET STRING ( SIZE (0 .. 100))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"GVRP has recieved registration for Vlan which is configured for End To End Flow Control.
Notify the Management with the Port in which the GVRP PDU was recieved and the Vlan."
::= { alcatelIND1GVRPMIBObjects 6 }
-- -------------------------------------------------------------
-- GVRP Port Config Table
-- -------------------------------------------------------------
-- DESCRIPTION:
-- "Port configuration information
-- data for the GVRP Module.
-- Implementation of this group is mandantory"
gvrpPortConfig OBJECT IDENTIFIER ::= { alcatelIND1GVRPMIBObjects 4 }
alaGvrpPortConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaGvrpPortConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing GVRP port configuration information."
::= { gvrpPortConfig 1 }
alaGvrpPortConfigEntry OBJECT-TYPE
SYNTAX AlaGvrpPortConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A GVRP port configuration entry."
INDEX { alaGvrpPortConfigIfIndex }
::= { alaGvrpPortConfigTable 1 }
AlaGvrpPortConfigEntry ::= SEQUENCE {
alaGvrpPortConfigIfIndex InterfaceIndex,
alaGvrpPortConfigRegistrarMode INTEGER,
alaGvrpPortConfigApplicantMode INTEGER,
alaGvrpPortConfigRestrictedRegistrationBitmap VlanBitmap,
alaGvrpPortConfigAllowRegistrationBitmap VlanBitmap,
alaGvrpPortConfigRegistrationBitmap VlanBitmap,
alaGvrpPortConfigRestrictedApplicantBitmap VlanBitmap,
alaGvrpPortConfigAllowApplicantBitmap VlanBitmap,
alaGvrpPortConfigApplicantBitmap VlanBitmap,
alaGvrpPortConfigRegistrationToStaticVlanLearn VlanBitmap,
alaGvrpPortConfigRegistrationToStaticVlanRestrict VlanBitmap,
alaGvrpPortConfigRegistrationToStaticVlan VlanBitmap,
alaGvrpPortConfigJoinTimer Unsigned32,
alaGvrpPortConfigLeaveTimer Unsigned32,
alaGvrpPortConfigLeaveAllTimer Unsigned32,
alaGvrpPortConfigProviderBpduMac INTEGER
}
alaGvrpPortConfigIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifindex of the port on which GVRP is running"
::= { alaGvrpPortConfigEntry 1 }
alaGvrpPortConfigRegistrarMode OBJECT-TYPE
SYNTAX INTEGER {
normal(1),
fixed(2),
forbidden(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Defines the mode of operation of all the registrar state machines associated to the port.
normal - registration as well as de-registration of VLANs are allowed.
fixed - A VLAN that was previously mapped onto such a port either dynamically or
statically cannot be de-registered through GVRP. When the port registration mode is set to fixed,
VLAN(s) can only be mapped onto such port statically.
forbidden - dynamic VLAN registration or de-registration are not allowed on the port.
NOTE: The registrar state machines for the default VLAN will operate in Fixed Registration Mode
for all the ports on the switch."
DEFVAL { normal }
::= { alaGvrpPortConfigEntry 2 }
alaGvrpPortConfigApplicantMode OBJECT-TYPE
SYNTAX INTEGER {
participant (1),
nonparticipant (2),
active (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Defines the mode of operation of all the applicant state machines associated to the port.
participant - The state machines participates normally in GVRP protocol exchanges.
non_participant - The state machines does not send any GVRP PDU(s).
active - The state machines send GVRP frames even on ports that are in blocking state on
the active spanning tree instance."
DEFVAL { participant }
::= { alaGvrpPortConfigEntry 3 }
alaGvrpPortConfigRestrictedRegistrationBitmap OBJECT-TYPE
SYNTAX VlanBitmap
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An octet string of 4096 bits that defines the status of the restricted registration control
for all VLAN(s) in the range from 1 to 4096. It defines whether VLAN(s) can be created in
the system based on GVRP processing or only mapped to ports in case they have already been
statically created in the system. The bitmap will only affect the GVRP processing if the
Registrar Administrative Control alaGvrpPortConfigRegistrarMode value on the port is set
normal registration (1). Each bit defines:
0= false, dynamic VLAN registration is not restricted
1= true, VLAN cannot be created in the system by GVRP processing.
However, if this VLAN already exists in the system as a static VLAN,
then it can be mapped to the receiving port"
::= { alaGvrpPortConfigEntry 4 }
alaGvrpPortConfigAllowRegistrationBitmap OBJECT-TYPE
SYNTAX VlanBitmap
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An octet string of 4096 bits that defines the status of the restricted registration control
for all VLAN(s) in the range from 1 to 4096. It defines whether VLAN(s) can be created in
the system based on GVRP processing or only mapped to ports in case they have already been
statically created in the system. The bitmap will only affect the GVRP processing if the
Registrar Administrative Control alaGvrpPortConfigRegistrarMode value on the port is set
normal registration (1). Each bit defines:
0= false, VLAN cannot be created in the system by GVRP processing.
1= true, dynamic VLAN registration is allowed
However, if this VLAN already exists in the system as a static VLAN,
then it can be mapped to the receiving port"
::= { alaGvrpPortConfigEntry 5 }
alaGvrpPortConfigRegistrationBitmap OBJECT-TYPE
SYNTAX VlanBitmap
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An octet string of 4096 bits that defines the status of the restricted registration control
for all VLAN(s) in the range from 1 to 4096. It defines whether VLAN(s) can be created in
the system based on GVRP processing or only mapped to ports in case they have already been
statically created in the system. The bitmap will only affect the GVRP processing if the
Registrar Administrative Control alaGvrpPortConfigRegistrarMode value on the port is set
normal registration (1). Each bit defines:
0= false, dynamic VLAN registration is not restricted
1= true, VLAN cannot be created in the system by GVRP processing.
However, if this VLAN already exists in the system as a static VLAN,
then it can be mapped to the receiving port"
::= { alaGvrpPortConfigEntry 6 }
alaGvrpPortConfigRestrictedApplicantBitmap OBJECT-TYPE
SYNTAX VlanBitmap
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An octet string of 4096 bits that defines the status of the restricted applicant control
for all VLAN(s) in the range from 1 to 4096. It defines whether VLAN(s) can be propagated in
the system based on GVRP processing. The bitmap will only affect the GVRP processing if the
Applicant Administrative Control alaGvrpPortConfigApplicantMode value on the port is set
participant(1) or active (3). Each bit defines:
0= false, VLAN propagation is not restricted
1= true, VLAN cannot be propagated in the system by GVRP processing."
::= { alaGvrpPortConfigEntry 7 }
alaGvrpPortConfigAllowApplicantBitmap OBJECT-TYPE
SYNTAX VlanBitmap
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An octet string of 4096 bits that defines the status of the restricted applicant control
for all VLAN(s) in the range from 1 to 4096. It defines whether VLAN(s) can be propagated in
the system based on GVRP processing. The bitmap will only affect the GVRP processing if the
Applicant Administrative Control alaGvrpPortConfigApplicantMode value on the port is set
participant(1) or active (3). Each bit defines:
0= false, VLAN cannot be propagated in the system by GVRP processing
1= true, VLAN propagation is allowed."
::= { alaGvrpPortConfigEntry 8 }
alaGvrpPortConfigApplicantBitmap OBJECT-TYPE
SYNTAX VlanBitmap
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An octet string of 4096 bits that defines the status of the restricted applicant control
for all VLAN(s) in the range from 1 to 4096. It defines whether VLAN(s) can be propagated in
the system based on GVRP processing. The bitmap will only affect the GVRP processing if the
Applicant Administrative Control alaGvrpPortConfigApplicantMode value on the port is set
participant(1) or active (3). Each bit defines:
0= false, VLAN propagation is not restricted
1= true, VLAN cannot be propagated in the system by GVRP processing."
::= { alaGvrpPortConfigEntry 9 }
alaGvrpPortConfigRegistrationToStaticVlanLearn OBJECT-TYPE
SYNTAX VlanBitmap
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An octet string of 4096 bits that defines the status of the registration to static VLAN control
for all VLAN(s) in the range from 1 to 4096. It defines whether ports can be mapped to statically
configured VLAN(s) based on GVRP processing. The bitmap will only affect the GVRP processing if
the Registrar Administrative Control alaGvrpPortConfigRegistrarMode value on the port is set to
normal registration (1). Each bit defines:
0= restrict, port is not allowed to become member of VLAN.
1= learn, port is allowed to become member of corresponding VLAN"
::= { alaGvrpPortConfigEntry 10 }
alaGvrpPortConfigRegistrationToStaticVlanRestrict OBJECT-TYPE
SYNTAX VlanBitmap
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An octet string of 4096 bits that defines the status of the registration to static VLAN control
for all VLAN(s) in the range from 1 to 4096. It defines whether ports can be mapped to statically
configured VLAN(s) based on GVRP processing. The bitmap will only affect the GVRP processing if
the Registrar Administrative Control alaGvrpPortConfigRegistrarMode value on the port is set to
normal registration (1). Each bit defines:
0= learn, port is allowed to become member of corresponding VLAN
1= restrict, port is not allowed to become member of VLAN."
::= { alaGvrpPortConfigEntry 11 }
alaGvrpPortConfigRegistrationToStaticVlan OBJECT-TYPE
SYNTAX VlanBitmap
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An octet string of 4096 bits that defines the status of the registration to static VLAN control
for all VLAN(s) in the range from 1 to 4096. It defines whether ports can be mapped to statically
configured VLAN(s) based on GVRP processing. The bitmap will only affect the GVRP processing if
the Registrar Administrative Control alaGvrpPortConfigRegistrarMode value on the port is set to
normal registration (1). Each bit defines:
0= learn, port is allowed to become member of corresponding VLAN
1= restrict, port is not allowed to become member of VLAN."
::= { alaGvrpPortConfigEntry 12 }
alaGvrpPortConfigJoinTimer OBJECT-TYPE
SYNTAX Unsigned32 (1 .. 2147483647)
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Maximum period of time that a GVRP instance waits before making declarations for VLANs."
DEFVAL { 600 }
::= { alaGvrpPortConfigEntry 13 }
alaGvrpPortConfigLeaveTimer OBJECT-TYPE
SYNTAX Unsigned32 (3 .. 2147483647)
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Period of time that a registrar state machine of a GVRP instance waits, after receiving
a leave message on a port for a particular VLAN, to remove the registration of that VLAN
on the port.
The value for the Leave Timer must be greater than three times the value for the Join
timer, i.e. Leave >= Join*3."
DEFVAL { 1800 }
::= { alaGvrpPortConfigEntry 14 }
alaGvrpPortConfigLeaveAllTimer OBJECT-TYPE
SYNTAX Unsigned32 (3 .. 2147483647)
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Interval at which the Leave All state machine of a GVRP instance generates Leave All
messages. A Leave All message instructs GVRP to modify the state of all VLANs registered
on a port to Leaving.
The value for the LeaveAll Timer must be greater than the value for the Leave
timer, i.e. LeaveAll >= Leave."
DEFVAL { 30000 }
::= { alaGvrpPortConfigEntry 15 }
alaGvrpPortConfigProviderBpduMac OBJECT-TYPE
SYNTAX INTEGER
{
enable (1),
disable (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Describes the treatment of gvrp frames ingressing on a gvrp enabled Vlan stacking network
ports.If disabled provider gvrp frames with provider group address are processed on the
port and if enabled provider gvrp frames with customer group address are processed on
gvrp enabled vlan stacking network port."
::= { alaGvrpPortConfigEntry 16 }
-- -------------------------------------------------------------
-- -------------------------------------------------------------
-- GVRP Port Statistics Table
-- -------------------------------------------------------------
-- DESCRIPTION:
-- "Port statistics information
-- for the GVRP Module.
-- Implementation of this group is mandantory"
gvrpPortStats OBJECT IDENTIFIER ::= { alcatelIND1GVRPMIBObjects 5 }
alaGvrpPortStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaGvrpPortStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing GVRP port statistics information."
::= { gvrpPortStats 1 }
alaGvrpPortStatsEntry OBJECT-TYPE
SYNTAX AlaGvrpPortStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A GVRP port statistics entry."
INDEX { alaGvrpPortStatsIfIndex }
::= { alaGvrpPortStatsTable 1 }
AlaGvrpPortStatsEntry ::= SEQUENCE {
alaGvrpPortStatsIfIndex InterfaceIndex,
alaGvrpPortStatsJoinEmptyReceived Counter32,
alaGvrpPortStatsJoinInReceived Counter32,
alaGvrpPortStatsEmptyReceived Counter32,
alaGvrpPortStatsLeaveInReceived Counter32,
alaGvrpPortStatsLeaveEmptyReceived Counter32,
alaGvrpPortStatsLeaveAllReceived Counter32,
alaGvrpPortStatsJoinEmptyTransmitted Counter32,
alaGvrpPortStatsJoinInTransmitted Counter32,
alaGvrpPortStatsEmptyTransmitted Counter32,
alaGvrpPortStatsLeaveInTransmitted Counter32,
alaGvrpPortStatsLeaveEmptyTransmitted Counter32,
alaGvrpPortStatsLeaveAllTransmitted Counter32,
alaGvrpPortStatsTotalPDUReceived Counter32,
alaGvrpPortStatsTotalPDUTransmitted Counter32,
alaGvrpPortStatsTotalMsgsReceived Counter32,
alaGvrpPortStatsTotalMsgsTransmitted Counter32,
alaGvrpPortStatsInvalidMsgsReceived Counter32,
alaGvrpPortStatsClearStats INTEGER
}
alaGvrpPortStatsIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifindex of the port on which GVRP is running"
::= { alaGvrpPortStatsEntry 1 }
alaGvrpPortStatsJoinEmptyReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Join Empty messages received."
::= { alaGvrpPortStatsEntry 2}
alaGvrpPortStatsJoinInReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Join In messages received."
::= { alaGvrpPortStatsEntry 3}
alaGvrpPortStatsEmptyReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Empty messages received."
::= { alaGvrpPortStatsEntry 4}
alaGvrpPortStatsLeaveInReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Leave In messages received."
::= { alaGvrpPortStatsEntry 5}
alaGvrpPortStatsLeaveEmptyReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Leave Empty messages received."
::= { alaGvrpPortStatsEntry 6}
alaGvrpPortStatsLeaveAllReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Leave all messages received."
::= { alaGvrpPortStatsEntry 7}
alaGvrpPortStatsJoinEmptyTransmitted OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Join Empty messages transmitted."
::= { alaGvrpPortStatsEntry 8}
alaGvrpPortStatsJoinInTransmitted OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Join In messages transmitted."
::= { alaGvrpPortStatsEntry 9}
alaGvrpPortStatsEmptyTransmitted OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Empty messages transmitted."
::= { alaGvrpPortStatsEntry 10}
alaGvrpPortStatsLeaveInTransmitted OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Leave In messages transmitted."
::= { alaGvrpPortStatsEntry 11}
alaGvrpPortStatsLeaveEmptyTransmitted OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Leave Empty messages transmitted."
::= { alaGvrpPortStatsEntry 12}
alaGvrpPortStatsLeaveAllTransmitted OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Leaveall messages transmitted."
::= { alaGvrpPortStatsEntry 13}
alaGvrpPortStatsTotalPDUReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of GVRP PDUs received."
::= { alaGvrpPortStatsEntry 14}
alaGvrpPortStatsTotalPDUTransmitted OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of GVRP PDUs transmitted."
::= { alaGvrpPortStatsEntry 15}
alaGvrpPortStatsTotalMsgsReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of GVRP messages received."
::= { alaGvrpPortStatsEntry 16}
alaGvrpPortStatsTotalMsgsTransmitted OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of GVRP messages transmitted."
::= { alaGvrpPortStatsEntry 17}
alaGvrpPortStatsInvalidMsgsReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Invalid messages received."
::= { alaGvrpPortStatsEntry 18}
alaGvrpPortStatsClearStats OBJECT-TYPE
SYNTAX INTEGER {
default(0),
reset(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Reset all statistics parameters corresponding to this port.
By default, this objects contains a zero value."
DEFVAL { default }
::= { alaGvrpPortStatsEntry 19}
-- --------------------------------------------------------------
-- NOTIFICATIONS (TRAPS)
-- These notifications will be sent to the management entity
-- whenever dynamically learnt vlans by gvrp across system reaches the defined limit
-- and when dynamically learnt vlans by gvrp at each NI reaches a defined limit.
-- --------------------------------------------------------------
alaGvrpEvents OBJECT IDENTIFIER ::= { alcatelIND1GVRPMIB 3 }
gvrpVlanLimitReachedEvent NOTIFICATION-TYPE
OBJECTS {
alaGvrpMaxVlanLimit }
STATUS current
DESCRIPTION
"The number of vlans learnt dynamically by GVRP has
reached a configured limit. Notify the management
entity with number of vlans learnt dynamically by
GVRP and the configured GVRP vlan limit."
::= { alaGvrpEvents 0 1 }
e2eGvrpVlanConflictTrap NOTIFICATION-TYPE
OBJECTS {
alaGvrpVlanConflictInfo }
STATUS current
DESCRIPTION
"GVRP has recieved a registration for Vlan which is configured for End To End Flow Control.
Notify the Management with the Port in which the GVRP PDU was recieved and the Vlan."
::= { alaGvrpEvents 0 2 }
-- -------------------------------------------------------------
-- COMPLIANCE
-- -------------------------------------------------------------
alcatelIND1GVRPMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Compliance statement for GVRP."
MODULE
MANDATORY-GROUPS
{
gvrpPortBaseGroup,
gvrpPortConfigGroup,
gvrpPortStatsGroup
}
::= { alcatelIND1GVRPMIBCompliances 1 }
-- -------------------------------------------------------------
-- UNITS OF CONFORMANCE
-- -------------------------------------------------------------
gvrpPortBaseGroup OBJECT-GROUP
OBJECTS
{
alaGvrpGlobalClearStats,
alaGvrpTransparentSwitching,
alaGvrpMaxVlanLimit
}
STATUS current
DESCRIPTION
"Collection of objects for management of GVRP Base Group."
::= { alcatelIND1GVRPMIBGroups 1 }
gvrpPortConfigGroup OBJECT-GROUP
OBJECTS
{
alaGvrpPortConfigRegistrarMode,
alaGvrpPortConfigApplicantMode,
alaGvrpPortConfigRestrictedRegistrationBitmap,
alaGvrpPortConfigAllowRegistrationBitmap,
alaGvrpPortConfigRegistrationBitmap,
alaGvrpPortConfigRestrictedApplicantBitmap,
alaGvrpPortConfigAllowApplicantBitmap,
alaGvrpPortConfigApplicantBitmap,
alaGvrpPortConfigRegistrationToStaticVlanLearn,
alaGvrpPortConfigRegistrationToStaticVlanRestrict,
alaGvrpPortConfigRegistrationToStaticVlan,
alaGvrpPortConfigJoinTimer,
alaGvrpPortConfigLeaveTimer,
alaGvrpPortConfigLeaveAllTimer
}
STATUS current
DESCRIPTION
"Collection of objects for management of GVRP Port Configuration Table."
::= { alcatelIND1GVRPMIBGroups 2 }
gvrpPortStatsGroup OBJECT-GROUP
OBJECTS
{
alaGvrpPortStatsJoinEmptyReceived,
alaGvrpPortStatsJoinInReceived,
alaGvrpPortStatsEmptyReceived,
alaGvrpPortStatsLeaveInReceived,
alaGvrpPortStatsLeaveEmptyReceived,
alaGvrpPortStatsLeaveAllReceived,
alaGvrpPortStatsJoinEmptyTransmitted,
alaGvrpPortStatsJoinInTransmitted,
alaGvrpPortStatsEmptyTransmitted,
alaGvrpPortStatsLeaveInTransmitted,
alaGvrpPortStatsLeaveEmptyTransmitted,
alaGvrpPortStatsLeaveAllTransmitted,
alaGvrpPortStatsTotalPDUReceived,
alaGvrpPortStatsTotalPDUTransmitted,
alaGvrpPortStatsTotalMsgsReceived,
alaGvrpPortStatsTotalMsgsTransmitted,
alaGvrpPortStatsInvalidMsgsReceived,
alaGvrpPortStatsClearStats
}
STATUS current
DESCRIPTION
"Collection of objects for management of GVRP Statistics Table."
::= { alcatelIND1GVRPMIBGroups 3 }
-- -------------------------------------------------------------
END