2219 lines
75 KiB
Plaintext
2219 lines
75 KiB
Plaintext
ALCATEL-IND1-NTP-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
OBJECT-IDENTITY, MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
|
|
IpAddress, Counter32, Unsigned32, Integer32
|
|
FROM SNMPv2-SMI
|
|
DisplayString, RowStatus
|
|
FROM SNMPv2-TC
|
|
MODULE-COMPLIANCE,
|
|
OBJECT-GROUP,
|
|
NOTIFICATION-GROUP
|
|
FROM SNMPv2-CONF
|
|
InetAddress, InetAddressType
|
|
FROM INET-ADDRESS-MIB
|
|
softentIND1Ntp
|
|
FROM ALCATEL-IND1-BASE;
|
|
|
|
alcatelIND1NTPMIB MODULE-IDENTITY
|
|
LAST-UPDATED "200704030000Z"
|
|
ORGANIZATION "Alcatel-Lucent"
|
|
CONTACT-INFO
|
|
"Please consult with Customer Service to ensure the most appropriate
|
|
version of this document is used with the products in question:
|
|
|
|
Alcatel-Lucent,Enterprise Solutions Division
|
|
(Formerly Alcatel Internetworking, Incorporated)
|
|
26801 West Agoura Road
|
|
Agoura Hills, CA 91301-5122
|
|
United States Of America
|
|
|
|
Telephone: North America +1 800 995 2696
|
|
Latin America +1 877 919 9526
|
|
Europe +31 23 556 0100
|
|
Asia +65 394 7933
|
|
All Other +1 818 878 4507
|
|
|
|
Electronic Mail: support@ind.alcatel.com
|
|
World Wide Web: http://alcatel-lucent.com/wps/portal/enterprise
|
|
File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs"
|
|
|
|
DESCRIPTION
|
|
"This module describes an authoritative enterprise-specific Simple
|
|
Network Management Protocol (SNMP) Management Information Base (MIB):
|
|
|
|
Propietary NTP MIB definitions
|
|
|
|
The right to make changes in specification and other information
|
|
contained in this document without prior notice is reserved.
|
|
|
|
No liability shall be assumed for any incidental, indirect, special,
|
|
or consequential damages whatsoever arising from or related to this
|
|
document or the information contained herein.
|
|
|
|
Vendors, end-users, and other interested parties are granted
|
|
non-exclusive license to use this specification in connection with
|
|
management of the products for which it is intended to be used.
|
|
|
|
Copyright (C) 1995-2007 Alcatel-Lucent
|
|
ALL RIGHTS RESERVED WORLDWIDE"
|
|
|
|
REVISION "200704030000Z"
|
|
DESCRIPTION
|
|
"The latest version of this MIB Module."
|
|
|
|
::= { softentIND1Ntp 1 }
|
|
|
|
alcatelIND1NTPMIBObjects OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Branch For NTP Subsystem Managed Objects."
|
|
::= { alcatelIND1NTPMIB 1 }
|
|
|
|
|
|
-- ************************************************************************
|
|
-- NTP Global Configuration
|
|
-- ************************************************************************
|
|
|
|
alaNtpConfig OBJECT IDENTIFIER ::= { alcatelIND1NTPMIBObjects 1 }
|
|
alaNtpInfo OBJECT IDENTIFIER ::= { alcatelIND1NTPMIBObjects 2 }
|
|
alaNtpStats OBJECT IDENTIFIER ::= { alcatelIND1NTPMIBObjects 3 }
|
|
alaNtpStatsStat OBJECT IDENTIFIER ::= { alcatelIND1NTPMIBObjects 4 }
|
|
alaNtpStatsLoop OBJECT IDENTIFIER ::= { alcatelIND1NTPMIBObjects 5 }
|
|
alaNtpStatsIo OBJECT IDENTIFIER ::= { alcatelIND1NTPMIBObjects 6 }
|
|
alaNtpAccess OBJECT IDENTIFIER ::= { alcatelIND1NTPMIBObjects 7 }
|
|
alaNtpLocalInfo OBJECT IDENTIFIER ::= { alcatelIND1NTPMIBObjects 8 }
|
|
|
|
|
|
|
|
alaIND1NtpMIBConformance OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Branch For Ntp Subsystem Managed Objects."
|
|
::= { alcatelIND1NTPMIB 2 }
|
|
|
|
alaIND1NtpMIBGroups OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Branch For Ntp Subsystem Managed Objects."
|
|
::= { alaIND1NtpMIBConformance 1}
|
|
|
|
alaIND1NtpMIBCompliances OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Branch For Ntp Subsystem Managed Objects."
|
|
::= { alaIND1NtpMIBConformance 2}
|
|
|
|
--
|
|
--
|
|
|
|
-- NTP configuration
|
|
|
|
alaNtpEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enables/disables NTP clock discipline."
|
|
DEFVAL { disable }
|
|
::= {alaNtpConfig 1}
|
|
|
|
alaNtpMonitorEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enables/disables NTP monitor."
|
|
DEFVAL { disable }
|
|
::= {alaNtpConfig 2}
|
|
|
|
alaNtpBroadcastEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enables/disables NTP broadcast client."
|
|
DEFVAL { disable }
|
|
::= {alaNtpConfig 3}
|
|
|
|
|
|
-- NTP Peer Table
|
|
|
|
alaNtpPeerTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NtpPeerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table containing the synchronization host this
|
|
switch will be associated with."
|
|
::= {alaNtpConfig 4}
|
|
|
|
alaNtpPeerEntry OBJECT-TYPE
|
|
SYNTAX NtpPeerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Each entry corresponds to a synchronization host."
|
|
INDEX { alaNtpPeerAddressType, alaNtpPeerAddress }
|
|
::= {alaNtpPeerTable 1}
|
|
|
|
NtpPeerEntry ::= SEQUENCE {
|
|
alaNtpPeerAddressType
|
|
InetAddressType,
|
|
alaNtpPeerAddress
|
|
InetAddress,
|
|
alaNtpPeerIpAddress
|
|
IpAddress,
|
|
alaNtpPeerType
|
|
INTEGER,
|
|
alaNtpPeerAuth
|
|
INTEGER,
|
|
alaNtpPeerVersion
|
|
INTEGER,
|
|
alaNtpPeerMinpoll
|
|
INTEGER,
|
|
alaNtpPeerPrefer
|
|
INTEGER,
|
|
alaNtpPeerAdmin
|
|
RowStatus,
|
|
alaNtpPeerName
|
|
DisplayString,
|
|
alaNtpPeerStratum
|
|
INTEGER
|
|
}
|
|
|
|
alaNtpPeerAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The InetAddress type of the synchronization host.
|
|
Only types InetAddressIPv4 (1) and InetAddressDNS (16)
|
|
are supported."
|
|
::={ alaNtpPeerEntry 1 }
|
|
|
|
alaNtpPeerAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The InetAddress of the synchronization host."
|
|
::={ alaNtpPeerEntry 2 }
|
|
|
|
alaNtpPeerIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The IP address of the synchronization host derrived
|
|
from the InetAddress."
|
|
::={ alaNtpPeerEntry 3 }
|
|
|
|
alaNtpPeerType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
active(1),
|
|
passive(2),
|
|
client(3),
|
|
server(4),
|
|
broadcast(5),
|
|
bclient(8)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Type of synchronization host that will communicate
|
|
with this switch. "
|
|
DEFVAL { client }
|
|
::= { alaNtpPeerEntry 4 }
|
|
|
|
alaNtpPeerAuth OBJECT-TYPE
|
|
SYNTAX INTEGER ( 0 .. 65535 )
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The authorization keyid for the remote host."
|
|
DEFVAL { 0 }
|
|
::= { alaNtpPeerEntry 5 }
|
|
|
|
alaNtpPeerVersion OBJECT-TYPE
|
|
SYNTAX INTEGER ( 1 .. 255 )
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The NTP version to communicate with the remote host."
|
|
DEFVAL { 4 }
|
|
::= { alaNtpPeerEntry 6 }
|
|
|
|
alaNtpPeerMinpoll OBJECT-TYPE
|
|
SYNTAX INTEGER ( 4 .. 10 )
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The minimum poll duration to the remote host. This
|
|
value is a power of 2 seconds when the poll will occur.
|
|
For example, 4 (2 to the power 4) is 16 seconds. The
|
|
maximum poll value is 10."
|
|
DEFVAL { 6 }
|
|
::= { alaNtpPeerEntry 7 }
|
|
|
|
alaNtpPeerPrefer OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
prefer (1),
|
|
noPrefer(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Marks the host as a preferred connection."
|
|
DEFVAL { noPrefer }
|
|
::= { alaNtpPeerEntry 8 }
|
|
|
|
alaNtpPeerAdmin OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used in accordance to installation and removal conventions
|
|
for conceptual rows. The RowStatus values that are
|
|
supported are the following:
|
|
active(1) - The row is active and valid.
|
|
createAndGo(4) - The row will be created and activated.
|
|
destroy(6) - The row will be destroyed."
|
|
::={ alaNtpPeerEntry 9 }
|
|
|
|
alaNtpPeerName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The DNS name for the peer association derrived from
|
|
the InetAddress."
|
|
::={ alaNtpPeerEntry 10 }
|
|
|
|
alaNtpPeerStratum OBJECT-TYPE
|
|
SYNTAX INTEGER ( 1 .. 16 )
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The stratum level of the remote peer. If this
|
|
number is 16, the remote peer has not been
|
|
synchronized. This parameter can only be set with
|
|
a LOCALCLOCK server."
|
|
DEFVAL { 5 }
|
|
::= { alaNtpPeerEntry 11 }
|
|
|
|
--
|
|
|
|
alaNtpAuthDelay OBJECT-TYPE
|
|
SYNTAX INTEGER ( 0 .. 65535 )
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This field sets a specified time interval
|
|
that is added to timestamps included in
|
|
requests to the server that required
|
|
authentication. Typically this delay is
|
|
needed in cases of long delay paths, or servers
|
|
whose clocks are unsynchronized. Value is
|
|
in milli-seconds"
|
|
DEFVAL { 0 }
|
|
::={ alaNtpConfig 5 }
|
|
|
|
alaNtpBroadcastDelay OBJECT-TYPE
|
|
SYNTAX INTEGER ( 0 .. 65535 )
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This field sets a specified time interval
|
|
that is added to timestamps included in
|
|
messages from broadcast servers. Value is
|
|
in milli-seconds"
|
|
DEFVAL { 4000 }
|
|
::={ alaNtpConfig 6 }
|
|
|
|
alaNtpKeysFile OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Name of the file which has the authorization keys."
|
|
::={ alaNtpConfig 7 }
|
|
|
|
alaNtpConfigReqKeyId OBJECT-TYPE
|
|
SYNTAX INTEGER ( 0 .. 65535 )
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Request messages ask for information from the NTP
|
|
entity such as timestamp information, statistics, etc.
|
|
This changes the authentication key identifier for
|
|
request messages sent from the switch to another NTP
|
|
entity."
|
|
DEFVAL { 0 }
|
|
::={ alaNtpConfig 8 }
|
|
|
|
alaNtpConfigCtlKeyId OBJECT-TYPE
|
|
SYNTAX INTEGER ( 0 .. 65535 )
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Control messages attempt to change the configuration
|
|
of the NTP entity in some fashion. This changes
|
|
the authentication key identifier for control messages
|
|
sent from the switch to another NTP entity."
|
|
DEFVAL { 0 }
|
|
::={ alaNtpConfig 9 }
|
|
|
|
alaNtpConfigCfgKeyId OBJECT-TYPE
|
|
SYNTAX INTEGER ( 0 .. 65535 )
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Configuration messages changes information on the
|
|
NTP entity."
|
|
DEFVAL { 0 }
|
|
::={ alaNtpConfig 10 }
|
|
|
|
alaNtpPrecision OBJECT-TYPE
|
|
SYNTAX INTEGER( -20..-1 )
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This sets the server's advertised precision."
|
|
DEFVAL { -6 }
|
|
::={ alaNtpConfig 11 }
|
|
|
|
alaNtpPeerTests OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enables/disable NTP peer synchronization tests.
|
|
Disabling peer tests allows the NTP client to
|
|
synchonize with servers that are themselves
|
|
unsynchronized or would otherwise be eliminated
|
|
by other time source tests."
|
|
DEFVAL { enable }
|
|
::={ alaNtpConfig 12 }
|
|
|
|
alaNtpSysStratum OBJECT-TYPE
|
|
SYNTAX Integer32 ( 2 .. 16 )
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The stratum level of the local server. If this number
|
|
is 16 it indicates that the switch is not synchronized.
|
|
This helps the clients to select clocks with lower stratum
|
|
number"
|
|
DEFVAL { 16 }
|
|
::= { alaNtpConfig 13}
|
|
|
|
alaNtpMaxAssociation OBJECT-TYPE
|
|
SYNTAX Integer32 ( 0 .. 64 )
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The maximum number of peer and client associations that
|
|
the switch will serve. This helps ensure that the switch
|
|
isn't overwhelmed by huge numbers of NTP synchronization
|
|
requests"
|
|
DEFVAL { 32 }
|
|
::= { alaNtpConfig 14}
|
|
|
|
alaNtpAuthenticate OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable/Disable authentication of the NTP requests on the
|
|
switch"
|
|
DEFVAL { enable }
|
|
::= { alaNtpConfig 15}
|
|
|
|
|
|
-- NTP Information
|
|
|
|
alaNtpPeerListTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NtpPeerListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Used to display a brief list of all NTP associations
|
|
related to this switch (servers, peers, etc.)."
|
|
::= {alaNtpInfo 1}
|
|
|
|
alaNtpPeerListEntry OBJECT-TYPE
|
|
SYNTAX NtpPeerListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Each entry corresponds to one association."
|
|
INDEX { alaNtpPeerListAddressType, alaNtpPeerListAddress }
|
|
::= {alaNtpPeerListTable 1}
|
|
|
|
NtpPeerListEntry ::= SEQUENCE {
|
|
alaNtpPeerListAddressType
|
|
InetAddressType,
|
|
alaNtpPeerListAddress
|
|
InetAddress,
|
|
alaNtpPeerListIpAddress
|
|
IpAddress,
|
|
alaNtpPeerListLocal
|
|
IpAddress,
|
|
alaNtpPeerListStratum
|
|
INTEGER,
|
|
alaNtpPeerListPoll
|
|
INTEGER,
|
|
alaNtpPeerListReach
|
|
INTEGER,
|
|
alaNtpPeerListDelay
|
|
DisplayString,
|
|
alaNtpPeerListOffset
|
|
DisplayString,
|
|
alaNtpPeerListDispersion
|
|
DisplayString,
|
|
alaNtpPeerListSynced
|
|
INTEGER,
|
|
alaNtpPeerListName
|
|
DisplayString
|
|
}
|
|
|
|
alaNtpPeerListAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The InetAddress type of the synchronization host.
|
|
InetAddressIPv4 (1) is the only type currently
|
|
supported."
|
|
::={ alaNtpPeerListEntry 1 }
|
|
|
|
alaNtpPeerListAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The InetAddress of the association."
|
|
::={ alaNtpPeerListEntry 2 }
|
|
|
|
alaNtpPeerListIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The IP address of the association."
|
|
::={ alaNtpPeerListEntry 3 }
|
|
|
|
alaNtpPeerListLocal OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The local interface address assigned by
|
|
NTP to the remote association. If this address is
|
|
0.0.0.0, then the local address has yet to be
|
|
determined."
|
|
::={ alaNtpPeerListEntry 4 }
|
|
|
|
alaNtpPeerListStratum OBJECT-TYPE
|
|
SYNTAX INTEGER ( 1 .. 16 )
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The stratum level of the remote peer. If this
|
|
number is 16, the remote peer has not been
|
|
synchronized."
|
|
::={ alaNtpPeerListEntry 5 }
|
|
|
|
alaNtpPeerListPoll OBJECT-TYPE
|
|
SYNTAX INTEGER ( 1 .. 65535 )
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The polling interval, in seconds."
|
|
::={ alaNtpPeerListEntry 6 }
|
|
|
|
alaNtpPeerListReach OBJECT-TYPE
|
|
SYNTAX INTEGER ( 1 .. 255 )
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The reachability register of the remote
|
|
association, in octal format. This number is
|
|
determined by the NTP algorithm."
|
|
::={ alaNtpPeerListEntry 7 }
|
|
|
|
alaNtpPeerListDelay OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The currently estimated delay of this remote
|
|
association, in seconds. This time is determined
|
|
by the NTP algorithm."
|
|
::={ alaNtpPeerListEntry 8 }
|
|
|
|
alaNtpPeerListOffset OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The currently estimated offset of this remote
|
|
association, in seconds. This time is determined
|
|
by the NTP algorithm."
|
|
::={ alaNtpPeerListEntry 9 }
|
|
|
|
alaNtpPeerListDispersion OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The currently estimated dispersion of this remote
|
|
association, in seconds. This time is determined
|
|
by the NTP algorithm."
|
|
::={ alaNtpPeerListEntry 10 }
|
|
|
|
alaNtpPeerListSynced OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
synchronized(1),
|
|
notSynchronized(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicates that NTP is synchronized with this
|
|
entity."
|
|
::={ alaNtpPeerListEntry 11 }
|
|
|
|
alaNtpPeerListName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The DNS name for the peer association,"
|
|
::={ alaNtpPeerListEntry 12 }
|
|
|
|
--
|
|
|
|
|
|
|
|
-- alaNtpLocalInfo
|
|
-- "Used to display information about the local
|
|
-- switch's implementation of NTP."
|
|
|
|
alaNtpInfoPeer OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The IP address of the remote association."
|
|
::={ alaNtpLocalInfo 1 }
|
|
|
|
alaNtpInfoMode OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The peer mode of this remote association."
|
|
::={ alaNtpLocalInfo 2 }
|
|
|
|
alaNtpInfoLeapIndicator OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noLeapWarning(0),
|
|
leapAddSecond(1),
|
|
leapDeleteSecond(2),
|
|
leapNotInSync(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The status of leap second insertion for
|
|
this association."
|
|
::={ alaNtpLocalInfo 3 }
|
|
|
|
alaNtpInfoStratum OBJECT-TYPE
|
|
SYNTAX INTEGER ( 1 .. 16 )
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The stratum level of the remote peer.
|
|
If this number is 16, the remote peer has not
|
|
been synchronized."
|
|
::={ alaNtpLocalInfo 4 }
|
|
|
|
alaNtpInfoPrecision OBJECT-TYPE
|
|
SYNTAX INTEGER( -20..-4 )
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The advertised precision of the switch.
|
|
It will be a number between -4 and -20."
|
|
::={ alaNtpLocalInfo 5 }
|
|
|
|
alaNtpInfoDistance OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is a signed fixed-point number indicating
|
|
the total roundtrip delay to the primary reference
|
|
source at the root of the synchronization subnet,
|
|
in seconds."
|
|
::={ alaNtpLocalInfo 6 }
|
|
|
|
alaNtpInfoDispersion OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is a signed fixed-point number indicating
|
|
the maximum error relative to the primary reference
|
|
source at the root of the synchronization subnet,
|
|
in seconds."
|
|
::={ alaNtpLocalInfo 7 }
|
|
|
|
alaNtpInfoReferenceId OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is a 32-bit code identifying the particular
|
|
reference clock. Can be an IP address."
|
|
::={ alaNtpLocalInfo 8 }
|
|
|
|
alaNtpInfoReferenceTime OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the local time at which the local clock
|
|
was last set or corrected."
|
|
::={ alaNtpLocalInfo 9 }
|
|
|
|
alaNtpInfoFrequency OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A number determining the local clocks frequency
|
|
in relation to a reference clock's Pulse per
|
|
Second (PPS). If the clock is running in perfect
|
|
synchronization, this number should be 1. Otherwise,
|
|
it will be slightly lower or higher in order to
|
|
compensate for the time difference."
|
|
::={ alaNtpLocalInfo 10 }
|
|
|
|
alaNtpInfoStability OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The stability of the clock in relation to a
|
|
reference clock's Pulse per Second (PPS)."
|
|
::={ alaNtpLocalInfo 11 }
|
|
|
|
alaNtpInfoBroadcastDelay OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The broadcast delay, in seconds, of this association."
|
|
::={ alaNtpLocalInfo 12 }
|
|
|
|
alaNtpInfoAuthDelay OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The authentication delay, in seconds, of this
|
|
association."
|
|
::={ alaNtpLocalInfo 13 }
|
|
|
|
|
|
-- ************************************************************************
|
|
-- Peer Show Table
|
|
-- ************************************************************************
|
|
alaNtpPeerShowTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NtpPeerShowEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Used to display a brief list of all NTP associations
|
|
related to this switch (servers, peers, etc.)."
|
|
::= {alaNtpInfo 3}
|
|
|
|
alaNtpPeerShowEntry OBJECT-TYPE
|
|
SYNTAX NtpPeerShowEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Each entry corresponds to one association."
|
|
INDEX { alaNtpPeerShowRemoteAddressType,
|
|
alaNtpPeerShowRemoteAddress }
|
|
::= {alaNtpPeerShowTable 1}
|
|
|
|
NtpPeerShowEntry ::= SEQUENCE {
|
|
alaNtpPeerShowRemoteAddressType
|
|
InetAddressType,
|
|
alaNtpPeerShowRemoteAddress
|
|
InetAddress,
|
|
alaNtpPeerShowRemoteIpAddress
|
|
IpAddress,
|
|
alaNtpPeerShowLocal
|
|
IpAddress,
|
|
alaNtpPeerShowHmode
|
|
DisplayString,
|
|
alaNtpPeerShowPmode
|
|
DisplayString,
|
|
alaNtpPeerShowStratum
|
|
INTEGER,
|
|
alaNtpPeerShowPrecision
|
|
INTEGER,
|
|
alaNtpPeerShowLeapIndicator
|
|
INTEGER,
|
|
alaNtpPeerShowReferenceId
|
|
DisplayString,
|
|
alaNtpPeerShowRootDistance
|
|
DisplayString,
|
|
alaNtpPeerShowRootDispersion
|
|
DisplayString,
|
|
alaNtpPeerShowPpoll
|
|
INTEGER,
|
|
alaNtpPeerShowHpoll
|
|
INTEGER,
|
|
alaNtpPeerShowKeyid
|
|
INTEGER,
|
|
alaNtpPeerShowVersion
|
|
INTEGER,
|
|
alaNtpPeerShowAssociation
|
|
INTEGER,
|
|
alaNtpPeerShowValid
|
|
INTEGER,
|
|
alaNtpPeerShowReach
|
|
INTEGER,
|
|
alaNtpPeerShowUnreach
|
|
INTEGER,
|
|
alaNtpPeerShowFlash
|
|
INTEGER,
|
|
alaNtpPeerShowBroadcastOffset
|
|
DisplayString,
|
|
alaNtpPeerShowTTL
|
|
INTEGER,
|
|
alaNtpPeerShowTimer
|
|
INTEGER,
|
|
alaNtpPeerShowFlags
|
|
INTEGER,
|
|
alaNtpPeerShowReferenceTime
|
|
DisplayString,
|
|
alaNtpPeerShowOriginateTime
|
|
DisplayString,
|
|
alaNtpPeerShowReceiveTime
|
|
DisplayString,
|
|
alaNtpPeerShowTransmitTime
|
|
DisplayString,
|
|
alaNtpPeerShowOffset
|
|
DisplayString,
|
|
alaNtpPeerShowDelay
|
|
DisplayString,
|
|
alaNtpPeerShowDispersion
|
|
DisplayString,
|
|
alaNtpPeerShowName
|
|
DisplayString,
|
|
alaNtpPeerShowStatus
|
|
BITS
|
|
}
|
|
|
|
alaNtpPeerShowRemoteAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The InetAddress type of the synchronization host.
|
|
InetAddressIPv4 (1) is the only type currently
|
|
supported."
|
|
::={ alaNtpPeerShowEntry 1 }
|
|
|
|
alaNtpPeerShowRemoteAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The InetAddress of the remote association."
|
|
::={ alaNtpPeerShowEntry 2 }
|
|
|
|
alaNtpPeerShowRemoteIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The IP address of the remote association."
|
|
::={ alaNtpPeerShowEntry 3 }
|
|
|
|
|
|
alaNtpPeerShowLocal OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The local interface address assigned by NTP to the
|
|
remote associations."
|
|
::={ alaNtpPeerShowEntry 4 }
|
|
|
|
alaNtpPeerShowHmode OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The host mode of this remote association."
|
|
::={ alaNtpPeerShowEntry 5 }
|
|
|
|
alaNtpPeerShowPmode OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The peer mode of this remote association."
|
|
::={ alaNtpPeerShowEntry 6 }
|
|
|
|
alaNtpPeerShowStratum OBJECT-TYPE
|
|
SYNTAX INTEGER ( 1 .. 16 )
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The stratum level of the remote peer."
|
|
::={ alaNtpPeerShowEntry 7 }
|
|
|
|
alaNtpPeerShowPrecision OBJECT-TYPE
|
|
SYNTAX INTEGER(-20..-4)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The advertised precision of this association,
|
|
which is a number from -4 to -20."
|
|
::={ alaNtpPeerShowEntry 8 }
|
|
|
|
alaNtpPeerShowLeapIndicator OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noLeapWarning(0),
|
|
leapAddSecond(1),
|
|
leapDeleteSecond(2),
|
|
leapNotInSync(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The status of leap second insertion for
|
|
this association."
|
|
::={ alaNtpPeerShowEntry 9 }
|
|
|
|
alaNtpPeerShowReferenceId OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is a 32-bit code identifying the peers primary
|
|
reference source. Normally an IP address."
|
|
::={ alaNtpPeerShowEntry 10 }
|
|
|
|
alaNtpPeerShowRootDistance OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is a signed fixed-point number indicating
|
|
the total roundtrip delay to the primary reference
|
|
source at the root of the synchronization subnet,
|
|
in seconds."
|
|
::={ alaNtpPeerShowEntry 11 }
|
|
|
|
alaNtpPeerShowRootDispersion OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is a signed fixed-point number indicating
|
|
the maximum error relative to the primary reference
|
|
source at the root of the synchronization subnet,
|
|
in seconds."
|
|
::={ alaNtpPeerShowEntry 12 }
|
|
|
|
alaNtpPeerShowPpoll OBJECT-TYPE
|
|
SYNTAX INTEGER ( 0 .. 255 )
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The poll time for this association when it is a peer."
|
|
::={ alaNtpPeerShowEntry 13 }
|
|
|
|
alaNtpPeerShowHpoll OBJECT-TYPE
|
|
SYNTAX INTEGER ( 0 .. 255 )
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The poll time for this association when it is a host."
|
|
::={ alaNtpPeerShowEntry 14 }
|
|
|
|
alaNtpPeerShowKeyid OBJECT-TYPE
|
|
SYNTAX INTEGER ( 0 .. 65535 )
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is an integer identifying the cryptographic
|
|
key used to generate the message authentication code."
|
|
::={ alaNtpPeerShowEntry 15 }
|
|
|
|
alaNtpPeerShowVersion OBJECT-TYPE
|
|
SYNTAX INTEGER ( 1 .. 255 )
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "What version of NTP this association is using."
|
|
::={ alaNtpPeerShowEntry 16 }
|
|
|
|
alaNtpPeerShowAssociation OBJECT-TYPE
|
|
SYNTAX INTEGER ( 0 .. 65535 )
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of seconds since this NTP entity was
|
|
associated with the switch."
|
|
::={ alaNtpPeerShowEntry 17 }
|
|
|
|
alaNtpPeerShowValid OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
false(0),
|
|
true(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is an integer indicating the validity
|
|
of current NTP system variables. The validity
|
|
is made false if system variable are changed
|
|
and a new peer sample under the changed
|
|
configuration has not been received."
|
|
::={ alaNtpPeerShowEntry 18 }
|
|
|
|
alaNtpPeerShowReach OBJECT-TYPE
|
|
SYNTAX INTEGER ( 0 .. 255 )
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is a shift register used to determine the
|
|
reachability status of this peer."
|
|
::={ alaNtpPeerShowEntry 19 }
|
|
|
|
alaNtpPeerShowUnreach OBJECT-TYPE
|
|
SYNTAX INTEGER ( 0 .. 15 )
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of times this NTP entity was unreachable."
|
|
::={ alaNtpPeerShowEntry 20 }
|
|
|
|
alaNtpPeerShowFlash OBJECT-TYPE
|
|
SYNTAX INTEGER ( 0 .. 32767 )
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This bitmap reveals the state at the last grumble from
|
|
the peer and are most handy for diagnosing problems.
|
|
|
|
Duplicate packet: 0x0001
|
|
Bogus packet: 0x0002
|
|
Protocol unsynchronized: 0x0004
|
|
Access denied: 0x0008
|
|
Authentication failure: 0x0010
|
|
Peer clock unsynchronized: 0x0020
|
|
Peer stratum out: 0x0040
|
|
Root delay/dispersion bounds check: 0x0080
|
|
Peer delay dispersion bounds check: 0x0100
|
|
Autokey failed: 0x0200
|
|
Proventic not confirmed: 0x0400"
|
|
|
|
::={ alaNtpPeerShowEntry 21 }
|
|
|
|
alaNtpPeerShowBroadcastOffset OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The broadcast delay."
|
|
::={ alaNtpPeerShowEntry 22 }
|
|
|
|
alaNtpPeerShowTTL OBJECT-TYPE
|
|
SYNTAX INTEGER ( 0 .. 255 )
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This field displays the Time-to-Live (TTL) time
|
|
in seconds and the mode (unicast, multicast, or
|
|
broadcast) of NTP messages sent to a broadcast address."
|
|
::={ alaNtpPeerShowEntry 23 }
|
|
|
|
alaNtpPeerShowTimer OBJECT-TYPE
|
|
SYNTAX INTEGER ( 0 .. 2147483647 )
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The time to next poll in seconds."
|
|
::={ alaNtpPeerShowEntry 24 }
|
|
|
|
alaNtpPeerShowFlags OBJECT-TYPE
|
|
SYNTAX INTEGER ( 0 .. 255 )
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This details which flags have been configured for this peer.
|
|
Association configured: 0x01
|
|
System peer: 0x02
|
|
Enabled for burst mode synchronization: 0x04
|
|
Reference clock: 0x08
|
|
Preferred server: 0x10
|
|
Authentable: 0x20
|
|
Synchronization candidate: 0x40
|
|
Synchronization candidates short-list: 0x80"
|
|
|
|
::={ alaNtpPeerShowEntry 25 }
|
|
|
|
alaNtpPeerShowReferenceTime OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the local time, in timestamp format, when
|
|
the peer clock was last updated."
|
|
::={ alaNtpPeerShowEntry 26 }
|
|
|
|
alaNtpPeerShowOriginateTime OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the local time, in timestamp format, of
|
|
the peer when its latest NTP message was sent."
|
|
::={ alaNtpPeerShowEntry 27 }
|
|
|
|
alaNtpPeerShowReceiveTime OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the local time, in timestamp format, when
|
|
the latest NTP message from the peer arrived."
|
|
::={ alaNtpPeerShowEntry 28 }
|
|
|
|
alaNtpPeerShowTransmitTime OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the local time, in timestamp format, at
|
|
which the last NTP message was sent from this
|
|
association."
|
|
::={ alaNtpPeerShowEntry 29 }
|
|
|
|
alaNtpPeerShowOffset OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The currently estimated offset of this remote
|
|
association, in seconds."
|
|
::={ alaNtpPeerShowEntry 30 }
|
|
|
|
alaNtpPeerShowDelay OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The currently estimated delay of this remote
|
|
association, in seconds."
|
|
::={ alaNtpPeerShowEntry 31 }
|
|
|
|
alaNtpPeerShowDispersion OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The currently estimated dispersion of this remote
|
|
association, in seconds."
|
|
::={ alaNtpPeerShowEntry 32 }
|
|
|
|
alaNtpPeerShowName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The DNS name for the peer association,"
|
|
::={ alaNtpPeerShowEntry 33 }
|
|
|
|
alaNtpPeerShowStatus OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
rejected(0),
|
|
falsticker(1),
|
|
excess(2),
|
|
outlyer(3),
|
|
candidate(4),
|
|
exceedsMaxDistance(5),
|
|
selected(6),
|
|
selectedPPS(7),
|
|
reachable(8),
|
|
authenticated(9),
|
|
authenticationRequired(10),
|
|
configured(11)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Peer selection status: Bits 0 - 7
|
|
- Rejected due to high stratum
|
|
and/or failed sanity checks: 1
|
|
- Designated falsticker by the
|
|
intersection algorithm: 2
|
|
- Excess, culled from the end of
|
|
the candidate list: 3
|
|
- Outlyer, discarded by the
|
|
clustering algorithm: 4
|
|
- Candidate, included in the final
|
|
selection set: 5
|
|
- Selected for synchronization; but
|
|
distance exceeds maximum: 6
|
|
- Selected for synchronization: 7
|
|
- Selected for synchronization,
|
|
PPS signal in use: 8
|
|
|
|
Peer association status: Bits 9 - 12
|
|
- Peer association configured: 9
|
|
- Peer authentication required: 10
|
|
- Last peer message authenticated: 11
|
|
- Peer reachable: 12"
|
|
|
|
::={ alaNtpPeerShowEntry 34 }
|
|
|
|
|
|
|
|
-- NTP statistics
|
|
|
|
-- alaNtpStatsStat
|
|
-- "The local server statistics."
|
|
|
|
alaNtpStatsStatUptime OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of seconds the local NTP server has
|
|
been associated with the switch."
|
|
::={ alaNtpStatsStat 1 }
|
|
|
|
alaNtpStatsStatReset OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of seconds since the last time the
|
|
local NTP server has been restarted."
|
|
::={ alaNtpStatsStat 2 }
|
|
|
|
alaNtpStatsStatBadStratum OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of NTP packets received that had a
|
|
corrupted stratum bit in the data of the packet."
|
|
::={ alaNtpStatsStat 3 }
|
|
|
|
alaNtpStatsStatOldVersion OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of NTP packets received that were
|
|
of an older version of NTP (either version 1 or 2)."
|
|
::={ alaNtpStatsStat 4 }
|
|
|
|
alaNtpStatsStatNewVersion OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of NTP packets received that were
|
|
version 3 of NTP."
|
|
::={ alaNtpStatsStat 5 }
|
|
|
|
alaNtpStatsStatUnknownVersion OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of NTP packets received that the
|
|
version was unknown (most likely due to packet
|
|
corruption)."
|
|
::={ alaNtpStatsStat 6 }
|
|
|
|
alaNtpStatsStatBadLength OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of NTP packets received that did not
|
|
fit the NTP packet structure (most likely due to
|
|
packet corruption)."
|
|
::={ alaNtpStatsStat 7 }
|
|
|
|
alaNtpStatsStatProcessed OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of NTP packets processed."
|
|
::={ alaNtpStatsStat 8 }
|
|
|
|
alaNtpStatsStatBadAuth OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of NTP packets rejected because they
|
|
did not meet authentication standards."
|
|
::={ alaNtpStatsStat 9 }
|
|
|
|
alaNtpStatsStatLimitRejects OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of NTP packets rejected because they
|
|
did not meet authentication standards."
|
|
::={ alaNtpStatsStat 10 }
|
|
|
|
alaNtpStatsPeerTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NtpStatsPeerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table containing the synchronization host statistics."
|
|
::= {alaNtpStats 2}
|
|
|
|
alaNtpStatsPeerEntry OBJECT-TYPE
|
|
SYNTAX NtpStatsPeerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Each entry corresponds to a synchronization host."
|
|
INDEX { alaNtpStatsPeerAddressType, alaNtpStatsPeerAddress }
|
|
::= {alaNtpStatsPeerTable 1}
|
|
|
|
NtpStatsPeerEntry ::= SEQUENCE {
|
|
alaNtpStatsPeerAddressType
|
|
InetAddressType,
|
|
alaNtpStatsPeerAddress
|
|
InetAddress,
|
|
alaNtpStatsPeerIpAddress
|
|
IpAddress,
|
|
alaNtpStatsPeerLocal
|
|
IpAddress,
|
|
alaNtpStatsPeerLastRcv
|
|
Counter32,
|
|
alaNtpStatsPeerNextSend
|
|
Counter32,
|
|
alaNtpStatsPeerReachChange
|
|
Counter32,
|
|
alaNtpStatsPeerPacketsSent
|
|
Counter32,
|
|
alaNtpStatsPeerPacketsRcvd
|
|
Counter32,
|
|
alaNtpStatsPeerBadAuth
|
|
Counter32,
|
|
alaNtpStatsPeerBogusOrigin
|
|
Counter32,
|
|
alaNtpStatsPeerDuplicate
|
|
Counter32,
|
|
alaNtpStatsPeerBadDispersion
|
|
Counter32,
|
|
alaNtpStatsPeerBadRefTime
|
|
Counter32,
|
|
alaNtpStatsPeerCandidateOrder
|
|
Counter32,
|
|
alaNtpStatsPeerReset
|
|
INTEGER,
|
|
alaNtpStatsPeerName
|
|
DisplayString
|
|
}
|
|
|
|
alaNtpStatsPeerAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The InetAddress type of the synchronization host.
|
|
InetAddressIPv4 (1) is the only type currently
|
|
supported."
|
|
::={ alaNtpStatsPeerEntry 1 }
|
|
|
|
alaNtpStatsPeerAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The InetAddress of the synchronization host."
|
|
::={ alaNtpStatsPeerEntry 2 }
|
|
|
|
alaNtpStatsPeerIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The IP address of the synchronization host."
|
|
::={ alaNtpStatsPeerEntry 3 }
|
|
|
|
alaNtpStatsPeerLocal OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The local interface address assigned by
|
|
NTP to the remote association."
|
|
::={ alaNtpStatsPeerEntry 4 }
|
|
|
|
alaNtpStatsPeerLastRcv OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The time since the last packet was received."
|
|
::= { alaNtpStatsPeerEntry 5 }
|
|
|
|
alaNtpStatsPeerNextSend OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The time until the next packet is to be sent."
|
|
::= { alaNtpStatsPeerEntry 6 }
|
|
|
|
alaNtpStatsPeerReachChange OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The time that the peer has been reachable."
|
|
::= { alaNtpStatsPeerEntry 7 }
|
|
|
|
alaNtpStatsPeerPacketsSent OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of packets that have been sent."
|
|
::= { alaNtpStatsPeerEntry 8 }
|
|
|
|
alaNtpStatsPeerPacketsRcvd OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of packets that have been received."
|
|
::= { alaNtpStatsPeerEntry 9 }
|
|
|
|
alaNtpStatsPeerBadAuth OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of packets received with bad
|
|
authentication."
|
|
::= { alaNtpStatsPeerEntry 10 }
|
|
|
|
alaNtpStatsPeerBogusOrigin OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of bogus packets."
|
|
::= { alaNtpStatsPeerEntry 11 }
|
|
|
|
alaNtpStatsPeerDuplicate OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of duplicated packets received."
|
|
::= { alaNtpStatsPeerEntry 12 }
|
|
|
|
alaNtpStatsPeerBadDispersion OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number bad dispersions."
|
|
::= { alaNtpStatsPeerEntry 13 }
|
|
|
|
alaNtpStatsPeerBadRefTime OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION "The number of bad reference times received."
|
|
::= { alaNtpStatsPeerEntry 14 }
|
|
|
|
alaNtpStatsPeerCandidateOrder OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The order of synchronization candidates."
|
|
::= { alaNtpStatsPeerEntry 15 }
|
|
|
|
alaNtpStatsPeerReset OBJECT-TYPE
|
|
SYNTAX INTEGER ( 0 .. 2147483647 )
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The number of seconds since the statistics for this
|
|
peer were last reset. Writing any value will reset
|
|
the peer statistics. "
|
|
DEFVAL { 0 }
|
|
::= { alaNtpStatsPeerEntry 16 }
|
|
|
|
alaNtpStatsPeerName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The DNS name for the peer association,"
|
|
::={ alaNtpStatsPeerEntry 17 }
|
|
|
|
|
|
--
|
|
|
|
-- alaNtpStatsLoop
|
|
-- "The loop filter is used to control and correct
|
|
-- the phase of timestamps as processed by the local
|
|
-- clock. The loop filter examines timestamps sent to
|
|
-- and from the local clock and can adjust them to
|
|
-- account for natural wander and jitter."
|
|
|
|
alaNtpStatsLoopOffset OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The currently estimated offset of this remote
|
|
association, in seconds. This counter indicates
|
|
the offset of the peer clock relative to the local
|
|
clock."
|
|
::={ alaNtpStatsLoop 1 }
|
|
|
|
alaNtpStatsLoopFrequency OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A number determining the local clocks frequency
|
|
in relation to a reference clocks Pulse per Second
|
|
(PPS). If the clock is running in perfect
|
|
synchronization, this number should be 1. Otherwise,
|
|
it will be slightly lower or higher in order to
|
|
compensate for the time discrepancy between the
|
|
reference clock and the local clock."
|
|
::={ alaNtpStatsLoop 2 }
|
|
|
|
alaNtpStatsLoopPollAdjust OBJECT-TYPE
|
|
SYNTAX INTEGER ( -30 .. 30 )
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Determines the peer polling time."
|
|
::={ alaNtpStatsLoop 3 }
|
|
|
|
alaNtpStatsLoopWatchdog OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Makes sure that NTP timer continues to run."
|
|
::={ alaNtpStatsLoop 4 }
|
|
|
|
|
|
--
|
|
|
|
-- alaNtpStatsIo
|
|
-- "General statistics on received and transmitted
|
|
-- NTP packets for this switch."
|
|
alaNtpStatsIoReset OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of seconds since the last restart of NTP."
|
|
::={ alaNtpStatsIo 1 }
|
|
|
|
alaNtpStatsIoRcvBuffers OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of switch receive buffers currently being
|
|
used by this NTP entity."
|
|
::={ alaNtpStatsIo 2 }
|
|
|
|
alaNtpStatsIoFreeRcvBuffers OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of free receive buffers."
|
|
::={ alaNtpStatsIo 3 }
|
|
|
|
alaNtpStatsIoUsedRcvBuffers OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of receive buffers currently being used."
|
|
::={ alaNtpStatsIo 4 }
|
|
|
|
alaNtpStatsIoRefills OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of times we added packets."
|
|
::={ alaNtpStatsIo 5 }
|
|
|
|
alaNtpStatsIoDroppedPackets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of packets dropped."
|
|
::={ alaNtpStatsIo 6 }
|
|
|
|
alaNtpStatsIoIgnoredPackets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of packets ignored."
|
|
::={ alaNtpStatsIo 7 }
|
|
|
|
alaNtpStatsIoRcvPackets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of NTP packets received by the switch."
|
|
::={ alaNtpStatsIo 8 }
|
|
|
|
alaNtpStatsIoSentPackets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of NTP packets sent by the switch."
|
|
::={ alaNtpStatsIo 9 }
|
|
|
|
alaNtpStatsIoNotSentPackets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of NTP packets generated but not sent
|
|
due to restrictions."
|
|
::={ alaNtpStatsIo 10 }
|
|
|
|
alaNtpStatsIoInterrupts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of times NTP information was interrupted
|
|
in the process of transmitting or receiving."
|
|
::={ alaNtpStatsIo 11 }
|
|
|
|
alaNtpStatsIoInterruptsRcv OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of packets received by the interrupt
|
|
handler."
|
|
::={ alaNtpStatsIo 12 }
|
|
|
|
alaNtpStatsReset OBJECT-TYPE
|
|
SYNTAX INTEGER ( 0 .. 127 )
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Resets the statistics counters for the following
|
|
subsystems:
|
|
0x01 - all peers
|
|
0x02 - i/o
|
|
0x04 - system
|
|
0x08 - memory
|
|
0x10 - timer
|
|
0x20 - authentication
|
|
0x40 - control"
|
|
DEFVAL { 0 }
|
|
::={ alaNtpStats 5 }
|
|
|
|
alaNtpStatsMonitorTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NtpStatsMonitorEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table containing the association monitoring list."
|
|
::= {alaNtpStats 6}
|
|
|
|
alaNtpStatsMonitorEntry OBJECT-TYPE
|
|
SYNTAX NtpStatsMonitorEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Each entry corresponds to a synchronization host."
|
|
INDEX { alaNtpStatsMonitorIndex }
|
|
::= {alaNtpStatsMonitorTable 1}
|
|
|
|
NtpStatsMonitorEntry ::= SEQUENCE {
|
|
alaNtpStatsMonitorIndex
|
|
Unsigned32,
|
|
alaNtpStatsMonitorAddress
|
|
IpAddress,
|
|
alaNtpStatsMonitorPort
|
|
INTEGER,
|
|
alaNtpStatsMonitorLocalAddress
|
|
IpAddress,
|
|
alaNtpStatsMonitorCount
|
|
Counter32,
|
|
alaNtpStatsMonitorMode
|
|
DisplayString,
|
|
alaNtpStatsMonitorVersion
|
|
INTEGER,
|
|
alaNtpStatsMonitorDrop
|
|
Counter32,
|
|
alaNtpStatsMonitorLast
|
|
Counter32,
|
|
alaNtpStatsMonitorFirst
|
|
Counter32,
|
|
alaNtpStatsMonitorName
|
|
DisplayString
|
|
}
|
|
|
|
alaNtpStatsMonitorIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 ( 1 .. 65535 )
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table index."
|
|
::={ alaNtpStatsMonitorEntry 1 }
|
|
|
|
alaNtpStatsMonitorAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The IP address of the remote association."
|
|
::={ alaNtpStatsMonitorEntry 2 }
|
|
|
|
alaNtpStatsMonitorPort OBJECT-TYPE
|
|
SYNTAX INTEGER ( 0 .. 65535 )
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The IP port number of the association."
|
|
::={ alaNtpStatsMonitorEntry 3 }
|
|
|
|
alaNtpStatsMonitorLocalAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The local IP address of the association."
|
|
::={ alaNtpStatsMonitorEntry 4 }
|
|
|
|
alaNtpStatsMonitorCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of NTP packets received from
|
|
this association."
|
|
::={ alaNtpStatsMonitorEntry 5 }
|
|
|
|
alaNtpStatsMonitorMode OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The mode the NTP association uses in relation
|
|
to the switch."
|
|
::={ alaNtpStatsMonitorEntry 6 }
|
|
|
|
alaNtpStatsMonitorVersion OBJECT-TYPE
|
|
SYNTAX INTEGER ( 1 .. 255 )
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The version of NTP the association is using."
|
|
::={ alaNtpStatsMonitorEntry 7 }
|
|
|
|
alaNtpStatsMonitorDrop OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of NTP packets received from this
|
|
association that were dropped."
|
|
::={ alaNtpStatsMonitorEntry 8 }
|
|
|
|
alaNtpStatsMonitorLast OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of seconds since the last NTP message
|
|
has been received from this association."
|
|
::={ alaNtpStatsMonitorEntry 9 }
|
|
|
|
alaNtpStatsMonitorFirst OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of seconds since the first NTP message
|
|
has been received from this association."
|
|
::={ alaNtpStatsMonitorEntry 10 }
|
|
|
|
alaNtpStatsMonitorName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The DNS name for the peer association,"
|
|
::={ alaNtpStatsMonitorEntry 11 }
|
|
|
|
|
|
-- NTP Admin control
|
|
|
|
|
|
-- NTP Access control
|
|
|
|
alaNtpAccessKeyIdTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NtpAccessKeyIdEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table containing the trusted keys."
|
|
::={ alaNtpAccess 1 }
|
|
|
|
alaNtpAccessKeyIdEntry OBJECT-TYPE
|
|
SYNTAX NtpAccessKeyIdEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry of a trusted key."
|
|
INDEX { alaNtpAccessKeyIdKeyId }
|
|
::={ alaNtpAccessKeyIdTable 1 }
|
|
|
|
NtpAccessKeyIdEntry ::= SEQUENCE {
|
|
alaNtpAccessKeyIdKeyId
|
|
INTEGER,
|
|
alaNtpAccessKeyIdTrust
|
|
INTEGER
|
|
}
|
|
|
|
alaNtpAccessKeyIdKeyId OBJECT-TYPE
|
|
SYNTAX INTEGER ( 0 .. 65535 )
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Keyid of the key in the key file."
|
|
::={ alaNtpAccessKeyIdEntry 1 }
|
|
|
|
alaNtpAccessKeyIdTrust OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
trusted(1),
|
|
untrusted(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The current state of trust of the table entry."
|
|
DEFVAL { untrusted }
|
|
::={ alaNtpAccessKeyIdEntry 2 }
|
|
|
|
|
|
|
|
alaNtpAccessRestrictedTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NtpAccessRestrictedEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table containing the restricted addresses."
|
|
::={ alaNtpAccess 2 }
|
|
|
|
alaNtpAccessRestrictedEntry OBJECT-TYPE
|
|
SYNTAX NtpAccessRestrictedEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry of a restricted address."
|
|
INDEX {
|
|
alaNtpAccessRestrictedIpAddress,
|
|
alaNtpAccessRestrictedMask
|
|
}
|
|
::={ alaNtpAccessRestrictedTable 1 }
|
|
|
|
NtpAccessRestrictedEntry ::= SEQUENCE {
|
|
alaNtpAccessRestrictedIpAddress
|
|
IpAddress,
|
|
alaNtpAccessRestrictedMask
|
|
IpAddress,
|
|
alaNtpAccessRestrictedRestrictions
|
|
INTEGER,
|
|
alaNtpAccessRestrictedCount
|
|
Counter32,
|
|
alaNtpAccessRestrictedRowStatus
|
|
RowStatus
|
|
}
|
|
|
|
alaNtpAccessRestrictedIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "IP address to restrict."
|
|
::={ alaNtpAccessRestrictedEntry 1 }
|
|
|
|
|
|
alaNtpAccessRestrictedMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "IP mask to restrict."
|
|
::={ alaNtpAccessRestrictedEntry 2 }
|
|
|
|
alaNtpAccessRestrictedRestrictions OBJECT-TYPE
|
|
SYNTAX INTEGER ( 0 .. 1023 )
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "A mask indicating the restrictions to apply
|
|
to the entry.
|
|
0x0001 - ignore, Ignore all packets from hosts.
|
|
Can't use this on default (0.0.0.0).
|
|
0x0002 - noserve, Ignore NTP packets other than
|
|
information queries and config-uration requests.
|
|
0x0004 - notrust, Treat these hosts normally in other
|
|
respects, but never use them as synchronization sources.
|
|
0x0008 - noquery, Ignore all NTP information
|
|
queries and configuration requests from the source.
|
|
0x0010 - nomodify, Ignore all NTP information
|
|
queries and configuration requests
|
|
that attempt to modify the state of the server.
|
|
0x0020 - nopeer, Provide stateless time service to
|
|
polling hosts, but do not allocate peer
|
|
memory resources to these hosts even if
|
|
they otherwise might be considered useful
|
|
as future synchronization partners.
|
|
0x0040 - notrap, Decline to provide control message
|
|
trap service to matching hosts.
|
|
0x0080 - lowpriotrap, Declare traps set by matching
|
|
hosts to be low priority.
|
|
0x0100 - limited, These hosts are subject to a
|
|
limitation of the number of clients from the same net.
|
|
0x0200 - version. Serves only current version.
|
|
0x0400 - demobilize. A demobilization packet (kod) packet is sent."
|
|
DEFVAL { 0 }
|
|
::={ alaNtpAccessRestrictedEntry 3 }
|
|
|
|
alaNtpAccessRestrictedCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of packets matched."
|
|
::={ alaNtpAccessRestrictedEntry 4 }
|
|
|
|
alaNtpAccessRestrictedRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used in accordance to installation and removal conventions
|
|
for conceptual rows. The RowStatus values that are
|
|
supported are the following:
|
|
active(1) - The row is active and valid.
|
|
createAndGo(4) - The row will be created and activated.
|
|
destroy(6) - The row will be destroyed."
|
|
::={ alaNtpAccessRestrictedEntry 5 }
|
|
|
|
alaNtpAccessRereadKeyFile OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
reload(1),
|
|
inProgress(2),
|
|
successful(3),
|
|
error(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Reloads the keyfile containing all currently
|
|
existing keys into the alaNtpAccessKeyIdTable in the
|
|
switch's memory. Reading this object will yield one of
|
|
the three following values:
|
|
inProgress(2),
|
|
successful(3),
|
|
failed(4)
|
|
A value of inProgress means that table reload procedure
|
|
is inProgress and not yet complete. A sucessful reply
|
|
means the last attempted keyfile load completed successfully.
|
|
A failed response indicates the last attempt to reload failed.
|
|
Writing a value of 1 to this object initiates a reload of the
|
|
table."
|
|
DEFVAL { successful }
|
|
::={ alaNtpAccess 3 }
|
|
|
|
-- Ntp Client IP Information (Deprecated)
|
|
|
|
ntpClientConfig OBJECT-TYPE
|
|
SYNTAX INTEGER { default(1), nonLoopback0(2), userIp(3) }
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The Agent Config Information
|
|
1 -- Default(Loopback0 or closest IP)
|
|
2 -- Non Loopback0
|
|
3 -- Interface IP Specified by User"
|
|
DEFVAL { 1 }
|
|
::= { alcatelIND1NTPMIBObjects 9 }
|
|
|
|
ntpClientIP OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The interface IP Address to be used in NTP Packets
|
|
for Source IP field."
|
|
::= { alcatelIND1NTPMIBObjects 10 }
|
|
|
|
-- Ntp Source IP Information
|
|
|
|
alaNtpSrcIpConfig OBJECT-TYPE
|
|
SYNTAX INTEGER { default(1), nonLoopback0(2), userIp(3) }
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The Agent Config Information
|
|
1 -- Default(Loopback0 or closest IP)
|
|
2 -- Non Loopback0
|
|
3 -- Interface IP Specified by User
|
|
This object has been obsoleted. Use the alaIpManagedIntfEntry objects
|
|
in AlcatelIND1Ip.mib"
|
|
DEFVAL { 1 }
|
|
::= { alcatelIND1NTPMIBObjects 11 }
|
|
|
|
alaNtpSrcIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The interface IP Address to be used in NTP Packets
|
|
for Source IP field.
|
|
This object has been obsoleted. Use the alaIpManagedIntfEntry objects
|
|
in AlcatelIND1Ip.mib"
|
|
::= { alcatelIND1NTPMIBObjects 12 }
|
|
|
|
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
|
|
-- COMPLIANCE
|
|
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
|
|
|
|
alaIND1NtpMonitorMIBCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Compliance statement for Health Monitoring."
|
|
MODULE
|
|
MANDATORY-GROUPS
|
|
{
|
|
alaNtpConfigGroup,
|
|
alaNtpInfoGroup,
|
|
alaNtpStatsGroup,
|
|
alaNtpStatsStatGroup,
|
|
alaNtpStatsLoopGroup,
|
|
alaNtpStatsIoGroup,
|
|
alaNtpAccessGroup,
|
|
alaNtpLocalInfoGroup,
|
|
alaNtpEventsGroup,
|
|
alaNtpSrcIpGroup
|
|
}
|
|
|
|
::= { alaIND1NtpMIBCompliances 1 }
|
|
|
|
|
|
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
|
|
-- UNITS OF CONFORMANCE
|
|
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
|
|
|
|
alaNtpConfigGroup OBJECT-GROUP
|
|
OBJECTS
|
|
{
|
|
alaNtpEnable,
|
|
alaNtpMonitorEnable,
|
|
alaNtpBroadcastEnable,
|
|
alaNtpPeerIpAddress,
|
|
alaNtpPeerType,
|
|
alaNtpPeerAuth,
|
|
alaNtpPeerVersion,
|
|
alaNtpPeerMinpoll,
|
|
alaNtpPeerPrefer,
|
|
alaNtpPeerAdmin,
|
|
alaNtpPeerName,
|
|
alaNtpPeerStratum,
|
|
alaNtpAuthDelay,
|
|
alaNtpBroadcastDelay,
|
|
alaNtpKeysFile,
|
|
alaNtpConfigReqKeyId,
|
|
alaNtpConfigCtlKeyId,
|
|
alaNtpPrecision,
|
|
alaNtpPeerTests,
|
|
alaNtpSysStratum,
|
|
alaNtpMaxAssociation,
|
|
alaNtpAuthenticate
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Collection of NTP configuration objects."
|
|
::= { alaIND1NtpMIBGroups 1 }
|
|
|
|
|
|
|
|
alaNtpInfoGroup OBJECT-GROUP
|
|
OBJECTS
|
|
{
|
|
alaNtpPeerListIpAddress,
|
|
alaNtpPeerListLocal,
|
|
alaNtpPeerListStratum,
|
|
alaNtpPeerListPoll,
|
|
alaNtpPeerListReach,
|
|
alaNtpPeerListDelay,
|
|
alaNtpPeerListOffset,
|
|
alaNtpPeerListDispersion,
|
|
alaNtpPeerListSynced,
|
|
alaNtpPeerListName,
|
|
alaNtpPeerShowRemoteIpAddress,
|
|
alaNtpPeerShowLocal,
|
|
alaNtpPeerShowHmode,
|
|
alaNtpPeerShowPmode,
|
|
alaNtpPeerShowStratum,
|
|
alaNtpPeerShowPrecision,
|
|
alaNtpPeerShowLeapIndicator,
|
|
alaNtpPeerShowReferenceId,
|
|
alaNtpPeerShowRootDistance,
|
|
alaNtpPeerShowRootDispersion,
|
|
alaNtpPeerShowPpoll,
|
|
alaNtpPeerShowHpoll,
|
|
alaNtpPeerShowKeyid,
|
|
alaNtpPeerShowVersion,
|
|
alaNtpPeerShowAssociation,
|
|
alaNtpPeerShowValid,
|
|
alaNtpPeerShowReach,
|
|
alaNtpPeerShowUnreach,
|
|
alaNtpPeerShowFlash,
|
|
alaNtpPeerShowBroadcastOffset,
|
|
alaNtpPeerShowTTL,
|
|
alaNtpPeerShowTimer,
|
|
alaNtpPeerShowFlags,
|
|
alaNtpPeerShowReferenceTime,
|
|
alaNtpPeerShowOriginateTime,
|
|
alaNtpPeerShowReceiveTime,
|
|
alaNtpPeerShowTransmitTime,
|
|
alaNtpPeerShowOffset,
|
|
alaNtpPeerShowDelay,
|
|
alaNtpPeerShowDispersion,
|
|
alaNtpPeerShowName,
|
|
alaNtpPeerShowStatus,
|
|
alaNtpClientListVersion,
|
|
alaNtpClientKey
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Collection of NTP peer information objects."
|
|
::= { alaIND1NtpMIBGroups 2 }
|
|
|
|
alaNtpStatsGroup OBJECT-GROUP
|
|
OBJECTS
|
|
{
|
|
alaNtpStatsPeerIpAddress,
|
|
alaNtpStatsPeerLocal,
|
|
alaNtpStatsPeerLastRcv,
|
|
alaNtpStatsPeerNextSend,
|
|
alaNtpStatsPeerReachChange,
|
|
alaNtpStatsPeerPacketsSent,
|
|
alaNtpStatsPeerPacketsRcvd,
|
|
alaNtpStatsPeerBadAuth,
|
|
alaNtpStatsPeerBogusOrigin,
|
|
alaNtpStatsPeerDuplicate,
|
|
alaNtpStatsPeerBadDispersion,
|
|
alaNtpStatsPeerBadRefTime,
|
|
alaNtpStatsPeerCandidateOrder,
|
|
alaNtpStatsPeerReset,
|
|
alaNtpStatsPeerName,
|
|
alaNtpStatsReset
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Collection of NTP peer information objects."
|
|
::= { alaIND1NtpMIBGroups 3 }
|
|
|
|
alaNtpStatsStatGroup OBJECT-GROUP
|
|
OBJECTS
|
|
{
|
|
alaNtpStatsStatUptime,
|
|
alaNtpStatsStatReset,
|
|
alaNtpStatsStatBadStratum,
|
|
alaNtpStatsStatOldVersion,
|
|
alaNtpStatsStatNewVersion,
|
|
alaNtpStatsStatUnknownVersion,
|
|
alaNtpStatsStatBadLength,
|
|
alaNtpStatsStatProcessed,
|
|
alaNtpStatsStatBadAuth,
|
|
alaNtpStatsStatLimitRejects
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Collection of NTP statistic objects."
|
|
::= { alaIND1NtpMIBGroups 4 }
|
|
|
|
alaNtpStatsLoopGroup OBJECT-GROUP
|
|
OBJECTS
|
|
{
|
|
alaNtpStatsLoopOffset,
|
|
alaNtpStatsLoopFrequency,
|
|
alaNtpStatsLoopPollAdjust,
|
|
alaNtpStatsLoopWatchdog
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Collection of NTP clocking objects."
|
|
::= { alaIND1NtpMIBGroups 5 }
|
|
|
|
alaNtpStatsIoGroup OBJECT-GROUP
|
|
OBJECTS
|
|
{
|
|
alaNtpStatsIoReset,
|
|
alaNtpStatsIoRcvBuffers,
|
|
alaNtpStatsIoFreeRcvBuffers,
|
|
alaNtpStatsIoUsedRcvBuffers,
|
|
alaNtpStatsIoRefills,
|
|
alaNtpStatsIoDroppedPackets,
|
|
alaNtpStatsIoIgnoredPackets,
|
|
alaNtpStatsIoRcvPackets,
|
|
alaNtpStatsIoSentPackets,
|
|
alaNtpStatsIoNotSentPackets,
|
|
alaNtpStatsIoInterrupts,
|
|
alaNtpStatsIoInterruptsRcv
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Collection of NTP send and receive statistics objects."
|
|
::= { alaIND1NtpMIBGroups 6 }
|
|
|
|
alaNtpAccessGroup OBJECT-GROUP
|
|
OBJECTS
|
|
{
|
|
alaNtpAccessKeyIdTrust,
|
|
alaNtpAccessRestrictedRestrictions,
|
|
alaNtpAccessRestrictedCount,
|
|
alaNtpAccessRestrictedRowStatus,
|
|
alaNtpAccessRereadKeyFile
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Collection of NTP authentication control objects."
|
|
::= { alaIND1NtpMIBGroups 7 }
|
|
|
|
alaNtpLocalInfoGroup OBJECT-GROUP
|
|
OBJECTS
|
|
{
|
|
alaNtpInfoPeer,
|
|
alaNtpInfoMode,
|
|
alaNtpInfoLeapIndicator,
|
|
alaNtpInfoStratum,
|
|
alaNtpInfoPrecision,
|
|
alaNtpInfoDistance,
|
|
alaNtpInfoDispersion,
|
|
alaNtpInfoReferenceId,
|
|
alaNtpInfoReferenceTime,
|
|
alaNtpInfoFrequency,
|
|
alaNtpInfoStability,
|
|
alaNtpInfoBroadcastDelay,
|
|
alaNtpInfoAuthDelay
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Collection of NTP local clock information objects."
|
|
::= { alaIND1NtpMIBGroups 8 }
|
|
|
|
alaNtpEventsGroup NOTIFICATION-GROUP
|
|
NOTIFICATIONS
|
|
{
|
|
alaNtpMaxAssocTrap
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Notify the management entity on reaching the maximum allowable NTP client and peer associations."
|
|
::= { alaIND1NtpMIBGroups 9 }
|
|
|
|
alaNtpSrcIpGroup OBJECT-GROUP
|
|
OBJECTS
|
|
{
|
|
alaNtpSrcIpConfig,
|
|
alaNtpSrcIp
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Collection of NTP source IP information objects."
|
|
::= { alaIND1NtpMIBGroups 10 }
|
|
|
|
|
|
-- new MIB objects to display the incoming client information
|
|
|
|
alaNtpClientListTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NtpClientListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Used to display a brief list of all incoming NTP client associations
|
|
related to this switch."
|
|
::= {alaNtpInfo 4}
|
|
|
|
alaNtpClientListEntry OBJECT-TYPE
|
|
SYNTAX NtpClientListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Each entry corresponds to one association."
|
|
INDEX { alaNtpClientListAddressType, alaNtpClientListAddress }
|
|
::= {alaNtpClientListTable 1}
|
|
|
|
NtpClientListEntry ::= SEQUENCE {
|
|
alaNtpClientListAddressType
|
|
InetAddressType,
|
|
alaNtpClientListAddress
|
|
InetAddress,
|
|
alaNtpClientListVersion
|
|
Integer32,
|
|
alaNtpClientKey
|
|
Integer32
|
|
}
|
|
alaNtpClientListAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType(1)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The InetAddress type of the incoming client association.
|
|
InetAddressIPv4 (1) is the only type currently
|
|
supported."
|
|
::={ alaNtpClientListEntry 1 }
|
|
|
|
alaNtpClientListAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The InetAddress of the client."
|
|
::={ alaNtpClientListEntry 2 }
|
|
|
|
alaNtpClientListVersion OBJECT-TYPE
|
|
SYNTAX Integer32 (3..4)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The NTP version used by the remote host for communication."
|
|
DEFVAL { 4 }
|
|
::= { alaNtpClientListEntry 3 }
|
|
|
|
alaNtpClientKey OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The authorization keyid for the remote host."
|
|
DEFVAL { 0 }
|
|
::= { alaNtpClientListEntry 4 }
|
|
|
|
-- /* MIB changes for trap information */
|
|
|
|
-- --------------------------------------------------------------
|
|
-- NOTIFICATIONS (TRAPS)
|
|
-- These notifications will be sent to the management entity
|
|
-- Whenever the maximum number of NTP associations is reached.
|
|
-- --------------------------------------------------------------
|
|
|
|
alaNtpEvents OBJECT IDENTIFIER ::= { alcatelIND1NTPMIB 3 }
|
|
alaNtpEventsRoot OBJECT IDENTIFIER ::= { alaNtpEvents 0}
|
|
|
|
alaNtpMaxAssocTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
alaNtpMaxAssociation
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Notify the management entity on reaching the maximum allowable NTP client and peer associations."
|
|
::= { alaNtpEventsRoot 1 }
|
|
|
|
END
|
|
|