mibs/MIBS/nokia/ALCATEL-IND1-PIM-MIB
2023-12-05 12:25:34 +01:00

752 lines
25 KiB
Plaintext

ALCATEL-IND1-PIM-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,
IpAddress, Integer32, TimeTicks
FROM SNMPv2-SMI
RowStatus
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
routingIND1Pim
FROM ALCATEL-IND1-BASE;
alcatelIND1PIMMIB MODULE-IDENTITY
LAST-UPDATED "200704030000Z"
ORGANIZATION "Alcatel-Lucent"
CONTACT-INFO
"Please consult with Customer Service to ensure the most appropriate
version of this document is used with the products in question:
Alcatel-Lucent, Enterprise Solutions Division
(Formerly Alcatel Internetworking, Incorporated)
26801 West Agoura Road
Agoura Hills, CA 91301-5122
United States Of America
Telephone: North America +1 800 995 2696
Latin America +1 877 919 9526
Europe +31 23 556 0100
Asia +65 394 7933
All Other +1 818 878 4507
Electronic Mail: support@ind.alcatel.com
World Wide Web: http://alcatel-lucent.com/wps/portal/enterprise
File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs"
DESCRIPTION
"This module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
This proprietary MIB contains management information for
the configuration of PIM-SM and PIM-DM global configuration
parameters.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 1995-2007 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE"
REVISION "200704030000Z"
DESCRIPTION
"The latest version of this MIB Module."
::= { routingIND1Pim 1 }
alcatelIND1PIMMIBObjects OBJECT IDENTIFIER ::= { alcatelIND1PIMMIB 1 }
alaPimsmGlobalConfig OBJECT IDENTIFIER ::= { alcatelIND1PIMMIBObjects 1 }
alaPimsmDebugConfig OBJECT IDENTIFIER ::= { alcatelIND1PIMMIBObjects 2 }
alaPimdmGlobalConfig OBJECT IDENTIFIER ::= { alcatelIND1PIMMIBObjects 3 }
-- ************************************************************************
-- PIM-SM Global Configuration
-- ************************************************************************
alaPimsmAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Administratively enables/disables the
PIM-SM protocol on this router."
DEFVAL { disable }
::= {alaPimsmGlobalConfig 1}
alaPimsmAdminBSRAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The IP address used to source the bootstrap message when
the router is configured to be a candidate bootstrap
router (C-BSR). This IP address should belong to a
PIM-enabled VLAN."
::= {alaPimsmGlobalConfig 2 }
alaPimsmAdminBSRHashmasklen OBJECT-TYPE
SYNTAX Integer32 (1..32)
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The length (in bits) of the mask to use in the hash
function when computing the rendezvous point (RP) for a
multicast group. This value may be changed to facilitate
vendor inter-operability. For IPV4 we recommend a value
of 30."
DEFVAL { 30 }
::= {alaPimsmGlobalConfig 3 }
alaPimsmAdminBSRPriority OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The candidate bootstrap router's (C-BSR) priority. The
C-BSR with the biggest priority value will be elected
as the BSR for this domain."
DEFVAL { 0 }
::= {alaPimsmGlobalConfig 4 }
alaPimsmCRPExpiryTime OBJECT-TYPE
SYNTAX Integer32 (1..300)
UNITS "seconds"
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The maximum time a PIM-SM router considers the current
candidate rendezvous point (C-RP) active."
DEFVAL { 300 }
::= {alaPimsmGlobalConfig 5 }
alaPimsmCRPInterval OBJECT-TYPE
SYNTAX Integer32 (1..300)
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"This is the interval at which the candidate rendezvous
point router's advertisements (C-RP-Adv) are sent
to the bootstrap router."
DEFVAL { 60 }
::= { alaPimsmGlobalConfig 6 }
alaPimsmAdminCRPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The IP Address of the C-RP when this router is configured
to be a Candidate RP. This IP address should belong to
a PIM-enabled vlan. The value of 0 indicates that
this router is not configured to be a C-RP."
DEFVAL { 0 }
::= {alaPimsmGlobalConfig 7 }
alaPimsmAdminCRPPriority OBJECT-TYPE
SYNTAX Integer32 (0..128)
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The candidate rendezvous point (C-RP) router's
priority. A lower numeric value denotes a higher
priority."
DEFVAL { 0 }
::= {alaPimsmGlobalConfig 8 }
alaPimsmDataTimeout OBJECT-TYPE
SYNTAX Integer32 (1..300)
UNITS "seconds"
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"This is the time after which (S,G) state for a
silent source will be deleted."
DEFVAL { 210 }
::= { alaPimsmGlobalConfig 9 }
alaPimsmMaxRPs OBJECT-TYPE
SYNTAX Integer32 (1..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum number of C-RPs allowed in the PIM-SM
domain."
DEFVAL { 32 }
::= { alaPimsmGlobalConfig 10 }
alaPimsmProbeTime OBJECT-TYPE
SYNTAX Integer32 (1..300)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When NULL Registers are used, this is the time
between sending a NULL Register and the Register-
Suppression-Timer expiring unless it is restarted
by receiving a Register-Stop."
DEFVAL { 5 }
::= { alaPimsmGlobalConfig 11}
alaPimsmOldRegisterMessageSupport OBJECT-TYPE
SYNTAX INTEGER {
header(1),
full(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the application of the checksum function on
received Register messages in the PIM-SM domain. When
set to full(2), the checksum for a register message
is computed for the entire packet (i.e. includes data).
When set to header(1), the checksum is done only on the
first 8 bytes of the packet. This variable is provided
for interoperability reasons and may be required for
Compatibility with older implementations of PIM-SM v2.
This parameter must be set the same throughout the
PIM-SM domain."
DEFVAL { header }
::= { alaPimsmGlobalConfig 12 }
alaPimsmRegisterSuppressionTimeout OBJECT-TYPE
SYNTAX Integer32 (1..300)
UNITS "seconds"
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"This is the amount of time a Designated Router (DR) will
stop sending Registers on behalf of sources to the RP
once a Register-Stop has been received."
DEFVAL { 60 }
::= { alaPimsmGlobalConfig 13}
alaPimsmAdminStaticRPConfig OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Administratively enables/disables Static RP
Configuration on this router."
DEFVAL { disable }
::= {alaPimsmGlobalConfig 14 }
-- The PIM Static-RP Table
alaPimsmStaticRPTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaPimsmStaticRPEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"The (conceptual) table listing the IP multicast groups
to be used in the group-to-RP mapping when
the value of alaPimsmAdminStaticRPConfig is enabled."
::= { alaPimsmGlobalConfig 15 }
alaPimsmStaticRPEntry OBJECT-TYPE
SYNTAX AlaPimsmStaticRPEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"An entry (conceptual row) in the alaPimsmStaticRPTable."
INDEX { alaPimsmStaticRPGroupAddress,
alaPimsmStaticRPGroupMask, alaPimsmStaticRPAddress }
::= { alaPimsmStaticRPTable 1 }
AlaPimsmStaticRPEntry ::= SEQUENCE {
alaPimsmStaticRPGroupAddress IpAddress,
alaPimsmStaticRPGroupMask IpAddress,
alaPimsmStaticRPAddress IpAddress,
alaPimsmStaticRPRowStatus RowStatus
}
alaPimsmStaticRPGroupAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"The IP multicast group address which, when combined with
alaPimsmStaticRPGroupMask, identifies a group prefix to be
used in the group-to-rp mapping algorithm."
::= { alaPimsmStaticRPEntry 1 }
alaPimsmStaticRPGroupMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"The multicast group address mask which, when combined with
alaPimsmStaticRPGroupMask, identifies a group prefix to be
used in the group-to-rp mapping algorithm."
::= { alaPimsmStaticRPEntry 2 }
alaPimsmStaticRPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"The (unicast) address of the interface which will be
an RP."
::= { alaPimsmStaticRPEntry 3 }
alaPimsmStaticRPRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"The status of this row, by which new entries may be
created, or old entries deleted from this table."
::= { alaPimsmStaticRPEntry 4 }
alaPimsmAdminSPTConfig OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Administratively enables/disables SPT Switchover
upon receiving the first data packet."
DEFVAL { enable }
::= {alaPimsmGlobalConfig 16 }
alaPimsmRPThreshold OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the RP threshold value (in bps) to be used
in determining when to switch to native
forwarding at the RP. The value of 0
disables the RP Threshold functionality."
DEFVAL { 1 }
::= {alaPimsmGlobalConfig 17 }
alaPimsmV6AdminStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Administratively enables/disables the
PIM-SM IPv6 protocol on this router."
DEFVAL { disable }
::= {alaPimsmGlobalConfig 18 }
alaPimsmV6SPTConfig OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Administratively enables/disables PIM IPv6 SPT Switchover
upon receiving the first data packet."
DEFVAL { enable }
::= {alaPimsmGlobalConfig 19 }
alaPimsmV6RPSwitchover OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Administratively enables/disables whether PIM IPv6
will attempt to switch to native forwarding at the RP
upon receiving the first register-encapsulated packet."
DEFVAL { enable }
::= {alaPimsmGlobalConfig 20 }
-- ************************************************************************
-- PIM-SM Debug Configuration
-- ************************************************************************
alaPimsmDebugLevel OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"This Object is deprecated in favor of alaDrcTmPimsmDebug
Configuration"
DEFVAL { 0 }
::= {alaPimsmDebugConfig 1}
alaPimsmDebugError OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"This Object is deprecated in favor of alaDrcTmPimsmDebugError
MIB Object of alaDrcTmPimsmDebug Configuration"
DEFVAL { disable }
::= {alaPimsmDebugConfig 2}
alaPimsmDebugHello OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"This Object is deprecated in favor of alaDrcTmPimsmDebugHello
MIB Object of alaDrcTmPimsmDebug Configuration"
DEFVAL { disable }
::= {alaPimsmDebugConfig 3}
alaPimsmDebugNbr OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"This Object is deprecated in favor of alaDrcTmPimsmDebugNbr
MIB Object of alaDrcTmPimsmDebug Configuration"
DEFVAL { disable }
::= {alaPimsmDebugConfig 4}
alaPimsmDebugBootstrap OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"This Object is deprecated in favor of
alaDrcTmPimsmDebugBootstrap MIB Object of alaDrcTmPimsmDebug
Configuration"
DEFVAL { disable }
::= {alaPimsmDebugConfig 5}
alaPimsmDebugCRP OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"This Object is deprecated in favor of alaDrcTmPimsmDebugCRP
MIB Object of alaDrcTmPimsmDebug Configuration"
DEFVAL { disable }
::= {alaPimsmDebugConfig 6}
alaPimsmDebugRoute OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"This Object is deprecated in favor of alaDrcTmPimsmDebugRoute
MIB Object of alaDrcTmPimsmDebug Configuration"
DEFVAL { disable }
::= {alaPimsmDebugConfig 7}
alaPimsmDebugJoinPrune OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"This Object is deprecated in favor of
alaDrcTmPimsmDebugJoinPrune MIB Object of alaDrcTmPimsmDebug
Configuration"
DEFVAL { disable }
::= {alaPimsmDebugConfig 8}
alaPimsmDebugAssert OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"This Object is deprecated in favor of alaDrcTmPimsmDebugAssert
MIB Object of alaDrcTmPimsmDebug Configuration"
DEFVAL { disable }
::= {alaPimsmDebugConfig 9}
alaPimsmDebugTime OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"This Object is deprecated in favor of alaDrcTmPimsmDebugTime
MIB Object of alaDrcTmPimsmDebug Configuration"
DEFVAL { disable }
::= {alaPimsmDebugConfig 10}
alaPimsmDebugIgmp OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"This Object is deprecated in favor of alaDrcTmPimsmDebugIgmp
MIB Object of alaDrcTmPimsmDebug Configuration"
DEFVAL { disable }
::= {alaPimsmDebugConfig 11}
alaPimsmDebugSpt OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"This Object is deprecated in favor of alaDrcTmPimsmDebugSpt
MIB Object of alaDrcTmPimsmDebug Configuration"
DEFVAL { disable }
::= {alaPimsmDebugConfig 12}
alaPimsmDebugMip OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"This Object is deprecated in favor of alaDrcTmPimsmDebugMip
MIB Object of alaDrcTmPimsmDebug Configuration"
DEFVAL { disable }
::= {alaPimsmDebugConfig 13}
alaPimsmDebugInit OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"This Object is deprecated in favor of alaDrcTmPimsmDebugInit
MIB Object of alaDrcTmPimsmDebug Configuration"
DEFVAL { disable }
::= {alaPimsmDebugConfig 14}
alaPimsmDebugTm OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"This Object is deprecated in favor of alaDrcTmPimsmDebugTm
MIB Object of alaDrcTmPimsmDebug Configuration"
DEFVAL { disable }
::= {alaPimsmDebugConfig 15}
alaPimsmDebugIpmrm OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"This Object is deprecated in favor of alaDrcTmPimsmDebugIpmrm
MIB Object of alaDrcTmPimsmDebug Configuration"
DEFVAL { disable }
::= {alaPimsmDebugConfig 16}
alaPimsmDebugMisc OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"This Object is deprecated in favor of alaDrcTmPimsmDebugMisc
MIB Object of alaDrcTmPimsmDebug Configuration"
DEFVAL { disable }
::= {alaPimsmDebugConfig 17}
alaPimsmDebugAll OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"This Object is deprecated in favor of alaDrcTmPimsmDebugAll
MIB Object of alaDrcTmPimsmDebug Configuration"
DEFVAL { disable }
::= {alaPimsmDebugConfig 18}
-- ************************************************************************
-- PIM-DM Global Configuration
-- ************************************************************************
alaPimdmAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Administratively enables/disables the
PIM-DM protocol on this router."
DEFVAL { disable }
::= {alaPimdmGlobalConfig 1}
alaPimdmStateRefreshTimeToLive OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The TTL to be used by this router's originated State
Refresh messages if the data packet's TTL is not
recorded."
DEFVAL { 16 }
::= {alaPimdmGlobalConfig 2}
alaPimdmStateRefreshLimitInterval OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This router will not forward successive State Refresh
messages received at less than this interval."
DEFVAL { 0 }
::= {alaPimdmGlobalConfig 3}
alaPimdmV6AdminStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Administratively enables/disables the
PIM-DM IPv6 protocol on this router."
DEFVAL { disable }
::= {alaPimdmGlobalConfig 4}
-- conformance information
alcatelIND1PIMMIBConformance OBJECT IDENTIFIER ::= { alcatelIND1PIMMIB 2 }
alcatelIND1PIMMIBCompliances OBJECT IDENTIFIER ::=
{ alcatelIND1PIMMIBConformance 1 }
alcatelIND1PIMMIBGroups OBJECT IDENTIFIER ::=
{ alcatelIND1PIMMIBConformance 2 }
-- compliance statements
alaPimsmCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for routers running PIM Sparse
Mode and implementing the ALCATEL-IND1-PIM MIB."
MODULE -- this module
MANDATORY-GROUPS { alaPimsmConfigMIBGroup, alaPimsmDebugMIBGroup }
::= { alcatelIND1PIMMIBCompliances 1 }
alaPimdmCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for routers running PIM Dense
Mode and implementing the ALCATEL-IND1-PIM MIB."
MODULE -- this module
MANDATORY-GROUPS { alaPimdmConfigMIBGroup }
::= { alcatelIND1PIMMIBCompliances 2 }
-- units of conformance
alaPimsmConfigMIBGroup OBJECT-GROUP
OBJECTS { alaPimsmAdminStatus, alaPimsmAdminBSRAddress,
alaPimsmAdminBSRHashmasklen, alaPimsmAdminBSRPriority,
alaPimsmCRPExpiryTime, alaPimsmCRPInterval,
alaPimsmAdminCRPAddress, alaPimsmAdminCRPPriority,
alaPimsmDataTimeout, alaPimsmMaxRPs,
alaPimsmProbeTime, alaPimsmOldRegisterMessageSupport,
alaPimsmRegisterSuppressionTimeout,
alaPimsmAdminStaticRPConfig, alaPimsmStaticRPRowStatus,
alaPimsmAdminSPTConfig, alaPimsmRPThreshold,
alaPimsmV6AdminStatus, alaPimsmV6SPTConfig,
alaPimsmV6RPSwitchover
}
STATUS current
DESCRIPTION
"A collection of objects to support management of global
configuration parameters of PIM Sparse Mode routers."
::= { alcatelIND1PIMMIBGroups 1 }
alaPimsmDebugMIBGroup OBJECT-GROUP
OBJECTS { alaPimsmDebugLevel, alaPimsmDebugError,
alaPimsmDebugHello, alaPimsmDebugNbr,
alaPimsmDebugBootstrap, alaPimsmDebugCRP,
alaPimsmDebugRoute, alaPimsmDebugJoinPrune,
alaPimsmDebugAssert, alaPimsmDebugTime,
alaPimsmDebugIgmp, alaPimsmDebugSpt,
alaPimsmDebugMip, alaPimsmDebugInit,
alaPimsmDebugTm, alaPimsmDebugIpmrm,
alaPimsmDebugMisc, alaPimsmDebugAll
}
STATUS current
DESCRIPTION
"A collection of optional objects to provide debugging
support of PIM Sparse Mode routers."
::= { alcatelIND1PIMMIBGroups 2 }
alaPimdmConfigMIBGroup OBJECT-GROUP
OBJECTS { alaPimdmAdminStatus, alaPimdmStateRefreshTimeToLive,
alaPimdmStateRefreshLimitInterval,
alaPimdmV6AdminStatus
}
STATUS current
DESCRIPTION
"A collection of objects to support management of global
configuration parameters of PIM Dense Mode routers."
::= { alcatelIND1PIMMIBGroups 3 }
END