mibs/MIBS/nokia/TIMETRA-TC-MG-MIB
2023-12-05 12:25:34 +01:00

1294 lines
44 KiB
Plaintext

TIMETRA-TC-MG-MIB DEFINITIONS ::= BEGIN
IMPORTS
Integer32, MODULE-IDENTITY, Unsigned32
FROM SNMPv2-SMI
DisplayString, TEXTUAL-CONVENTION
FROM SNMPv2-TC
TNamedItem, TNamedItemOrEmpty,
timetraTCMIBModule
FROM TIMETRA-TC-MIB
;
timetraTCMGMIBModule MODULE-IDENTITY
LAST-UPDATED "201701010000Z"
ORGANIZATION "Nokia"
CONTACT-INFO
"Nokia SROS Support
Web: http://www.nokia.com"
DESCRIPTION
"This document is the SNMP MIB module for the SNMP Textual Conventions
(TCs) used in the Nokia SROS manageability instrumentation.
Copyright 2003-2018 Nokia. All rights reserved. Reproduction of this
document is authorized on the condition that the foregoing copyright
notice is included.
This SNMP MIB module (Specification) embodies Nokia's
proprietary intellectual property. Nokia retains
all title and ownership in the Specification, including any
revisions.
Nokia grants all interested parties a non-exclusive license to use and
distribute an unmodified copy of this Specification in connection with
management of Nokia products, and without fee, provided this copyright
notice and license appear on all copies.
This Specification is supplied `as is', and Nokia makes no warranty,
either express or implied, as to the use, operation, condition, or
performance of the Specification."
REVISION "201701010000Z"
DESCRIPTION
"Rev 15.0 01 Jan 2017 00:00
15.0 release of the TIMETRA-TC-MG-MIB."
REVISION "201311080000Z"
DESCRIPTION
"Rev 1.0 08 Nov 2013 00:00
1.0 Release of the TIMETRA-TC-MG-MIB."
::= { timetraTCMIBModule 1 }
TmnxMobProfName ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The data type TmnxMobProfName describes the name of a profile used by
mobile gateways."
SYNTAX TNamedItem
TmnxMobProfNameOrEmpty ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The data type TmnxMobProfNameOrEmpty describes the name of a profile
used by mobile gateways."
SYNTAX TNamedItemOrEmpty
TmnxMobProfIpTtl ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The data type TmnxMobProfIpTtl describes the Time-To-Live (TTL) value."
SYNTAX Unsigned32 (1..255)
TmnxMobProfMsgReTxTimeout ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The data type TmnxMobProfMsgReTxTimeout describes the message
retransmit timeout value in seconds."
SYNTAX Unsigned32 (1..30)
TmnxMobProfMsgReTxRetryCount ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The data type TmnxMobProfMsgReTxRetryCount describes the message
retransmit retry count value."
SYNTAX Unsigned32 (1..8)
TmnxMobProfKeepAliveTimeout ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The data type TmnxMobProfKeepAliveTimeout describes the keep-alive
timeout value in seconds."
SYNTAX Unsigned32 (0 | 60..180)
TmnxMobProfKeepAliveRetryCount ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The data type TmnxMobProfKeepAliveRetryCount describes the keep-alive
retry count value."
SYNTAX Unsigned32 (1..15)
TmnxMobProfKeepAliveResponse ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The data type TmnxMobProfKeepAliveResponse describes the keep-alive T3
response value in seconds."
SYNTAX Unsigned32 (1..20)
TmnxMobProfKeepAliveInterval ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The data type TmnxMobProfKeepAliveInterval describes the intervals
between heartbeat messages"
SYNTAX Unsigned32 (0 | 60..180)
TmnxMobDiaTransTimer ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The data type TmnxMobDiaTransTimer describes the diameter peer
transaction timer value in seconds."
SYNTAX Unsigned32 (1..180)
TmnxMobDiaRetryCount ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The data type TmnxMobDiaRetryCount describes the diameter peer retry
count value."
SYNTAX Unsigned32 (0..8)
TmnxMobDiaPeerHost ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The data type TmnxMobDiaPeerHost describes the name of a destination
realm, originating realm and originating host."
SYNTAX DisplayString (SIZE (0..80))
TmnxMobGwId ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The data type TmnxMobGwId identifies mobile gateways."
SYNTAX Unsigned32 (1..8)
TmnxMobNode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The data type TmnxMobNode describes the name of a mobile gateway which
consists of Mobile Country Code (MCC), Mobile Network Code (MNC),
Region string, Group Id, Node Id.
A mobile gateway name can be described as follows:
<MCC>.<MNC>.<SGW|PGW>.<Region String>.<Group Id>.<Node Id>
MCC : 3 digits (000-999)
MNC : 2 or 3 digits
Application Type : SGW or PGW (3 characters)
Region String : 10 characters
Group Id : 3 characters
Node Id : 3 characters"
SYNTAX DisplayString (SIZE (0..30))
TmnxMobBufferLimit ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The data type TmnxMobBufferLimit describes the buffer limit in bytes."
SYNTAX Unsigned32 (1000..12000)
TmnxMobQueueLimit ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The data type TmnxMobQueueLimit describes the queue limit in bytes."
SYNTAX Unsigned32 (1000..12000)
TmnxMobRtrAdvtInterval ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The data type TmnxMobRtrAdvtInterval describes the router
advertisement interval in minutes."
SYNTAX Unsigned32 (1..60)
TmnxMobRtrAdvtLifeTime ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The data type TmnxMobRtrAdvtLifeTime describes the router
advertisement life time in hours."
SYNTAX Unsigned32 (1..24)
TmnxMobAddrScheme ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The data type TmnxMobAddrScheme describes the addressing scheme. If
the value is set to 'stateful', User Equipment (UE) uses DHCPv6 to get
IPv6 address. If the value is set to 'stateless', UE uses ICMPv6 to
get IPv6 address."
SYNTAX INTEGER {
stateful (1),
stateless (2)
}
TmnxMobQciValue ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The data type TmnxMobQciValue describes the QoS Class Identifier (QCI)
value."
SYNTAX Unsigned32 (1..9)
TmnxMobQciValueOrZero ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The data type TmnxMobQciValueOrZero describes the QoS Class Identifier
(QCI) value."
SYNTAX Unsigned32 (0..9)
TmnxMobArpValue ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The data type TmnxMobArpValue describes the Allocation and Retention
Priority (ARP) value."
SYNTAX Unsigned32 (1..15)
TmnxMobArpValueOrZero ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The data type TmnxMobArpValueOrZero describes the Allocation and
Retention Priority (ARP) value."
SYNTAX Unsigned32 (0..15)
TmnxMobApn ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The data type TmnxMobApn describes the Access Point Name (APN)
associated with an User Equipment (UE)."
REFERENCE
"3GPP TS 23.003 Section 9.1"
SYNTAX DisplayString (SIZE (1..100))
TmnxMobApnOrZero ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The data type TmnxMobApnOrZero describes the Access Point Name (APN)
associated with an User Equipment (UE)."
SYNTAX DisplayString (SIZE (0..100))
TmnxMobApnDomainName ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The data type TmnxMobApnDomainName holds a DNS Domain Name derived
from an Access Point Name (APN).
The maximum size is arbitrarily chosen in order to be large enough to
hold a Network Identifier of length 63, and small enough to be used as
index in a table."
SYNTAX DisplayString (SIZE (1..108))
TmnxMobImsi ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The data type TmnxMobImsi describes the International Mobile
Subscriber Identity (IMSI) of an User Equipment (UE).
IMSI is defined as a number consisting of up to 15 BCD digits. The
first 3 digits are the Mobile Country Code (MCC). The next 2 or 3
digits are the Mobile Network Code (MNC). The value of MCC determines
whether the MNC is 2 digits or 3 digits. The remaining digits are the
Mobile Subscriber Identification Number (MSIN). The internal
representation of the IMSI is as follows:
Bits 63-62 are reserved.
Bits 61-60 indicate the length of the MNC field: 10 indicates a
2-digit MNC while 11 indicates a 3-digit MNC.
Bits 59-0 hold the 15 IMSI BCD digits D1-15.
When the total number of digits in the IMSI is less than 15, the
nibble 0xf is used a filler.
IMSI encoding for a 2-digit MNC:
63 55 47 39 0
+-----------+-----------+-----------+-------------------------+
| 0010| MCC1| MCC2| MCC3| MNC1| MNC2| MSIN (up to 10 digits)
+-----------+-----------+-----------+-------------------------+
IMSI encoding for a 3-digit MNC:
63 55 47 39 35 0
+-----------+-----------+-----------+-------------------------+
| 0011| MCC1| MCC2| MCC3| MNC1| MNC2| MNC3| MSIN (up to 9 digits)
+-----------+-----------+-----------+-------------------------+
Bits 63-56 of the IMSI are carried in octet number 1 of the octet
string and bits 7-0 are carried in octet number 8 of the octet string."
SYNTAX OCTET STRING (SIZE (8))
TmnxMobMsisdn ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The data type TmnxMobMsisdn describes the Mobile Subscriber Integrated
Services Digital Network (MSISDN) number of an User Equipment (UE)."
SYNTAX DisplayString (SIZE (0..15))
TmnxMobImei ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The data type TmnxMobImei describes the International Mobile Equipment
Identity (IMEI) of an User Equipment (UE)."
SYNTAX DisplayString (SIZE (0|16))
TmnxMobNai ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The data type TmnxMobNai describes the Network Address Identifier
(NAI) of an User Equipment (UE)."
SYNTAX DisplayString (SIZE (0..72))
TmnxMobMcc ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The data type TmnxMobMcc describes the Mobile Country Code (MCC) of an
User Equipment (UE)."
SYNTAX DisplayString (SIZE (3))
TmnxMobMnc ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The data type TmnxMobMnc describes the Mobile Network Code (MNC) of an
User Equipment (UE)."
SYNTAX DisplayString (SIZE (2|3))
TmnxMobMccOrEmpty ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The data type TmnxMobMccOrEmpty describes the Mobile Country Code
(MCC) of an User Equipment (UE)."
SYNTAX DisplayString (SIZE (0|3))
TmnxMobMncOrEmpty ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The data type TmnxMobMncOrEmpty describes the Mobile Network Code
(MNC) of an User Equipment (UE)."
SYNTAX DisplayString (SIZE (0|2|3))
TmnxMobUeState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The data type TmnxMobUeState describes the state of an User Equipment
(UE)."
SYNTAX INTEGER {
idle (1),
active (2),
paging (3),
init (4),
suspend (5),
ddnDamp (6)
}
TmnxMobUeRat ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The data type TmnxMobUeRat describes the Radio Access Type (RAT) of an
User Equipment (UE)."
SYNTAX INTEGER {
utran (1),
geran (2),
wlan (3),
gan (4),
hspa (5),
eutran (6),
ehrpd (7),
hrpd (8),
oneXrtt (9),
umb (10)
}
TmnxMobUeSubType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The data type TmnxMobUeSubType describes the subscription type of User
Equipment (UE)."
SYNTAX INTEGER {
homer (1),
roamer (2),
visitor (3)
}
TmnxMobPdnType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The data type TmnxMobPdnType describes the type of a Packet Data
Network (PDN)."
SYNTAX INTEGER {
ipv4 (1),
ipv6 (2),
ipv4v6 (3)
}
TmnxMobPgwSigProtocol ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The data type TmnxMobPgwSigProtocol describes the signaling protocol
used on S5 or S8 reference point."
SYNTAX INTEGER {
gtp (1),
pmip (2)
}
TmnxMobPdnSessionState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The data type TmnxMobPdnSessionState describes the feedback signaling
message (FSM) state of a Packet Data Network (PDN) session."
SYNTAX INTEGER {
invalid (0),
init (1),
waitPcrfResponse (2),
waitPgwResponse (3),
waitEnodebUpdate (4),
connected (5),
ulDelPending (6),
dlDelPending (7),
idleMode (8),
pageMode (9),
dlHandover (10),
incomingHandover (11),
outgoingHandover (12),
stateMax (13)
}
TmnxMobPdnSessionEvent ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The data type TmnxMobPdnSessionEvent describes the feedback signaling
message (FSM) event of a Packet Data Network (PDN) session."
SYNTAX INTEGER {
sessionInvalid (0),
gtpCreateSessReq (1),
gtpUpdateBearerReq (2),
gtpDeleteSessReq (3),
gtpDeleteBearerResp (4),
gtpUpdateBearerResp (5),
gtpModifyActiveToIdle (6),
gtpResrcAllocCmd (7),
gtpModifyQosCmd (8),
gtpX1eNodeBTeidUpdate (9),
gtpX2SrcSgwDeleteSessReq (10),
gtpS1CreateIndirectTunnel (11),
dlPktRecvIndication (12),
dlPktNotificationAck (13),
dlPktNotificationFail (14),
pcrfSessEstResp (15),
pcrfSessTerminateRsp (16),
pcrfProvQosRules (17),
pmipSessResp (18),
pmipSessUpdate (19),
pmipSessDeleteRsp (20),
pmipSessDeleteReq (21),
eventMax (22)
}
TmnxMobBearerId ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The data type TmnxMobBearerId describes the bearer identifier."
SYNTAX Unsigned32 (1..15)
TmnxMobBearerType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The data type TmnxMobBearerType describes the type of a bearer."
SYNTAX INTEGER {
default (1),
dedicated (2)
}
TmnxMobQci ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The data type TmnxMobQci describes the QoS Class Identifier."
SYNTAX Unsigned32 (0..9)
TmnxMobExtQci ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The data type TmnxMobQci describes the QoS Class Identifier extended
range."
SYNTAX Unsigned32 (0..255)
TmnxMobArp ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The data type TmnxMobArp describes the QoS parameter, Allocation and
Retention Priority (ARP)."
SYNTAX Unsigned32 (0..15)
TmnxMobSdf ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The data type TmnxMobSdf describes the number of Service Data Flows
(SDFs)."
SYNTAX Unsigned32 (0..255)
TmnxMobSdfFilter ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The data type TmnxMobSdfFilter describes a IP filter in a Service Data
Flow (SDF) or Traffic Flow Template (TFT)."
SYNTAX Unsigned32 (0..16)
TmnxMobSdfFilterNum ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The data type TmnxMobSdfFilterNum describes the number of IP filters."
SYNTAX Unsigned32 (0..16)
TmnxMobSdfRuleName ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The data type TmnxMobSdfRuleName describes the policy rule name of a
Service Data Flow (SDF)."
SYNTAX DisplayString (SIZE (1..64))
TmnxMobSdfFilterDirection ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The data type TmnxMobSdfFilterDirection describes the direction on
which a Service Data Flow (SDF) filter rule is valid."
SYNTAX INTEGER {
preRel7 (0),
downLink (1),
upLink (2),
biDir (3)
}
TmnxMobSdfFilterProtocol ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The data type TmnxMobSdfFilterProtocol describes IPv4 protocol or IPv6
next header on which Service Data Flow (SDF) filter matches."
SYNTAX INTEGER {
any (-1),
ipv6HopByOpOpt (0),
icmp (1),
igmp (2),
ggp (3),
ip (4),
st (5),
tcp (6),
cbt (7),
egp (8),
igp (9),
bbnRccMon (10),
nvp2 (11),
pup (12),
argus (13),
emcon (14),
xnet (15),
chaos (16),
udp (17),
mux (18),
dcnMeas (19),
hmp (20),
prm (21),
xnsIdp (22),
trunk1 (23),
trunk2 (24),
leaf1 (25),
leaf2 (26),
rdp (27),
irdp (28),
isoTp4 (29),
netblt (30),
mfeNsp (31),
meritInp (32),
dccp (33),
pc3 (34),
idpr (35),
xtp (36),
ddp (37),
idprCmtp (38),
tpplusplus (39),
il (40),
ipv6 (41),
sdrp (42),
ipv6Route (43),
ipv6Frag (44),
idrp (45),
rsvp (46),
gre (47),
dsr (48),
bna (49),
esp (50),
ah (51),
iNlsp (52),
swipe (53),
narp (54),
mobile (55),
tlsp (56),
skip (57),
ipv6Icmp (58),
ipv6NoNxt (59),
ipv6Opts (60),
anyHostIntl (61),
cftp (62),
anyLocalNet (63),
satExpak (64),
kryptolan (65),
rvd (66),
ippc (67),
anyDFS (68),
satMon (69),
visa (70),
ipcv (71),
cpnx (72),
cphb (73),
wsn (74),
pvp (75),
brSatMon (76),
sunNd (77),
wbMon (78),
wbExpak (79),
isoIp (80),
vmtp (81),
secureVmpt (82),
vines (83),
ttp (84),
nsfnetIgp (85),
dgp (86),
tcf (87),
eiGrp (88),
ospfIgp (89),
spriteRpc (90),
larp (91),
mtp (92),
ax25 (93),
ipip (94),
micp (95),
sccSp (96),
etherIp (97),
encap (98),
anyPEC (99),
gmtp (100),
ifmp (101),
pnni (102),
pim (103),
aris (104),
scps (105),
qnx (106),
activeNet (107),
ipComp (108),
snp (109),
compaqPeer (110),
ipxInIp (111),
vrrp (112),
pgm (113),
any0hop (114),
l2tp (115),
ddx (116),
iatp (117),
stp (118),
srp (119),
uti (120),
smp (121),
sm (122),
ptp (123),
isis (124),
fire (125),
crtp (126),
crudp (127),
sscopmce (128),
iplt (129),
sps (130),
pipe (131),
sctp (132),
fc (133),
rsvpE2eIgnore (134),
mobHeader (135),
udpLite (136),
mplsInIp (137),
manet (138),
hip (139),
shim6 (140)
}
TmnxMobPathMgmtState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The data type TmnxMobPathMgmtState describes the state of a path for a
reference point. A value of 'reqTimeOut' indicates that the peer is
not replying to the Echo Request messages the SGW is sending out."
SYNTAX INTEGER {
disabled (0),
up (1),
reqTimeOut (2),
fault (3),
idle (4),
restart (5)
}
TmnxMobDiaPathMgmtState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The data type TmnxMobDiaPathMgmtState describes the state of a path
for a diameter connection."
SYNTAX INTEGER {
shutDown (0),
shuttingDown (1),
inactive (2),
active (3)
}
TmnxMobDiaDetailPathMgmtState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The data type TmnxMobDiaDetailPathMgmtState describes the detail state
of a path for a diameter connection."
SYNTAX INTEGER {
error (0),
idle (1),
closed (2),
localShutdown (3),
remoteClosing (4),
waitConnAck (5),
waitCea (6),
open (7),
openCoolingDown (8),
waitDns (9)
}
TmnxMobGwType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The data type TmnxMobGwType describes the mobile gateway type."
SYNTAX INTEGER {
sgw (1),
pgw (2),
wlanGw (3)
}
TmnxMobChargingProfile ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The data type TmnxMobChargingProfile describes the charging trigger
rules applied for generating Charging Data Records (CDR) for
subscribers."
SYNTAX Unsigned32 (0..255)
TmnxMobChargingProfileOrInherit ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The data type TmnxMobChargingProfileOrInherit describes the charging
trigger rules applied for generating Charging Data Records (CDR) for
subscribers. A value of '-1' indicates that identifier will be
inherited from another object that is usually in another mib table."
SYNTAX Integer32 (-1 | 0..255)
TmnxMobAuthType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The data type TmnxMobAuthType describes the authentication type used
by mobile gateways."
SYNTAX INTEGER {
radius (1),
diameter (2)
}
TmnxMobAuthUserName ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The data type TmnxMobAuthUserName describes the user name used in
authentication requests by mobile gateways."
SYNTAX INTEGER {
imsi (1),
msisdn (2),
pco (3)
}
TmnxMobProfGbrRate ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The data type TmnxMobProfGbrRate describes the Guaranteed Bit Rate
(GBR) value in kilobits per second(kbps)."
SYNTAX Unsigned32 (0..100000)
TmnxMobProfMbrRate ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The data type TmnxMobProfMbrRate describes the Maximum Bit Rate (MBR)
value in kilobits per second(kbps)."
SYNTAX Unsigned32 (0..100000)
TmnxMobPeerType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The data type TmnxMobPeerType describes the type of the mobile gateway
peer as Serving Gateway (SGW), Packet Data Network Gateway (PGW) or
High Rate Packet Data (HRPD) Serving Gateway (HSGW)."
SYNTAX INTEGER {
sgw (1),
pgw (2),
hsgw (3)
}
TmnxMobRfAcctLevel ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"TmnxMobRfAcctLevel data type is an enumerated integer that describes
the accounting level."
SYNTAX INTEGER {
pdnLevel (1),
qciLevel (2)
}
TmnxMobProfPolReportingLevel ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"TmnxMobProfPolReportingLevel data type is an enumerated integer that
describes the Reporting level for the Policy and Charging Control
(PCC) rule."
SYNTAX INTEGER {
servId (1),
ratingGrp (2)
}
TmnxMobProfPolChargingMethod ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"TmnxMobProfPolChargingMethod data type is an enumerated integer that
describes the Charging Method for the Policy and Charging Control
(PCC) rule. A variable of this type could be set to 'online' charging
method, 'offline' charging method or 'both'.
If the variable is set to 'profChargingMtd' the charging method is set
to 'offline' if 'tmnxMobProfPgwChrgOffLineState' is set to 'enabled',
the charging method is set to 'online' if 'tmnxMobProfPgwChrgGyState'
is set to 'enabled' and the charging method is set to 'both' if both
'tmnxMobProfPgwChrgOffLineState' and 'tmnxMobProfPgwChrgGyState' are
set to 'enabled'."
SYNTAX INTEGER {
profChargingMtd (0),
online (1),
offline (2),
both (3)
}
TmnxMobProfPolMeteringMethod ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"TmnxMobProfPolMeteringMethod data type is an enumerated integer that
describes the Metering Method for the Policy and Charging Control
(PCC) rule."
SYNTAX INTEGER {
timeBased (1),
volBased (2),
both (3)
}
TmnxMobServerState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The data type TmnxMobServerState describes the state of a server
connected with a mobile gateway."
SYNTAX INTEGER {
na (0),
up (1),
down (2)
}
TmnxMobChargingBearerType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The data type TmnxMobChargingBearerType describes the type of a bearer
context used in charging applications."
SYNTAX INTEGER {
home (1),
visiting (2),
roaming (3)
}
TmnxMobChargingLevel ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The data type TmnxMobChargingLevel describes the level where the
charging is done."
SYNTAX INTEGER {
pdn (1),
bearer (2)
}
TmnxMobIpCanType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The data type TmnxMobIpCanType describes the type of Internet Protocol
Connectivity Access Network (IP-CAN) session as Evolved Packet Core
(epc3gpp) or GPRS (gprs3gpp)."
SYNTAX INTEGER {
epc3gpp (1),
gprs3gpp (2)
}
TmnxMobStaticPolPrecedence ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The data type TmnxMobStaticPolPrecedence describes the precedence
value for a static policy configured in the system."
SYNTAX Unsigned32 (1..65536)
TmnxMobStaticPolPrecedenceOrZero ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The data type TmnxMobStaticPolPrecedence describes the precedence
value for a static policy configured in the system."
SYNTAX Unsigned32 (0..65535)
TmnxMobDualStackPref ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The data type TmnxMobDualStackPref describes the preference in a dual
IP stack.
The value 'useCplane' specifies that the value is inherited from the
preference in a dual IP stack on control plane."
SYNTAX INTEGER {
ipv4 (1),
ipv6 (2),
useCplane (3)
}
TmnxMobDfPeerId ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The data type TmnxMobDfPeerId identifies Delivery Function (DF) peer
for the mobile gateways."
SYNTAX Unsigned32 (1..16)
TmnxMobLiTarget ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The data type TmnxMobLiTarget describes the target for the
interception.
The target can be of type International Mobile Subscriber Identity
(IMSI), Mobile Subscriber Integrated Services Digital Network (MSISDN)
or International Mobile Equipment Identity (IMEI).
IMSI is defined as a number consisting of up to 15 BCD digits. The
first 3 digits are the Mobile Country Code (MCC). The next 2 or 3
digits are the Mobile Network Code (MNC). The value of MCC determines
whether the MNC is 2 digits or 3 digits. The remaining digits are the
Mobile Subscriber Identification Number (MSIN). The internal
representation of the IMSI is as follows:
Bits 63-62 are reserved.
Bits 61-60 indicate the length of the MNC field: 10 indicates a
2-digit MNC while 11 indicates a 3-digit MNC.
Bits 59-0 hold the 15 IMSI BCD digits D1-15.
When the total number of digits in the IMSI is less than 15, the
nibble 0xf is used a filler.
IMSI encoding for a 2-digit MNC:
63 55 47 39 0
+-----------+-----------+-----------+-------------------------+
| 0010| MCC1| MCC2| MCC3| MNC1| MNC2| MSIN (up to 10 digits)
+-----------+-----------+-----------+-------------------------+
IMSI encoding for a 3-digit MNC:
63 55 47 39 35 0
+-----------+-----------+-----------+-------------------------+
| 0011| MCC1| MCC2| MCC3| MNC1| MNC2| MNC3| MSIN (up to 9 digits)
+-----------+-----------+-----------+-------------------------+
Bits 63-56 of the IMSI are carried in octet number 1 of the octet
string and bits 7-0 are carried in octet number 8 of the octet string."
SYNTAX OCTET STRING (SIZE (8))
TmnxMobLiTargetType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The data type TmnxMobLiTargetType describes the types of target in
Lawful Interception (LI)."
SYNTAX INTEGER {
imsi (1),
msisdn (2),
imei (3)
}
TmnxMobUeId ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The data type TmnxMobUeId describes the identity of an User Equipment.
TmnxMobUeId can be of the following types: International Mobile
Subscriber Identity (IMSI), International Mobile station Equipment
Identity (IMEI), Mobile Subscriber Integrated Services Digital network
Number (MSISDN). IMSI, IMEI, MSISDN are defined in 3GPP TS 23.003.
IMSI is defined as a number consisting of up to 15 BCD digits. The
first 3 digits are the Mobile Country Code (MCC). The next 2 or 3
digits are the Mobile Network Code (MNC). The value of MCC determines
whether the MNC is 2 digits or 3 digits. The remaining digits are the
Mobile Subscriber Identification Number (MSIN).
IMEI is defined as a number consisting of up to 16 BCD digits. The
first 8 digits consists of Type Allocation Code (TAC). The next 6
digits consist of Serial Number (SNR) which could be followed by a
Check Digit (CD) or Spare Digit (SD) of size 1 digit or by a Software
Version Number (SVN) of size 2 digits.
MSISDN is defined as a number consisting of 9 to 15 BCD digits. MSISDN
consists of Country Code (CC) followed by National Destination Code
(NDC) and Subscriber Number (SN).
Bits 63-56 of the IMSI or IMEI or MSISDN are carried in octet number 1
of the octet string and bits 7-0 are carried in octet number 8 of the
octet string.
The internal representation of the IMSI is as follows:
Bits 63-62 are reserved.
Bits 61-60 indicate the length of the MNC field: 10 indicates a
2-digit MNC while 11 indicates a 3-digit MNC.
Bits 59-0 hold the 15 IMSI BCD digits D1-15.
When the total number of digits in the IMSI is less than 15, the
nibble 0xf is used a filler.
IMSI encoding for a 2-digit MNC:
63 55 47 39 0
+-----------+-----------+-----------+-------------------------+
| 0010| MCC1| MCC2| MCC3| MNC1| MNC2| MSIN (up to 10 digits)
+-----------+-----------+-----------+-------------------------+
IMSI encoding for a 3-digit MNC:
63 55 47 39 35 0
+-----------+-----------+-----------+-------------------------+
| 0011| MCC1| MCC2| MCC3| MNC1| MNC2| MNC3| MSIN (up to 9 digits)
+-----------+-----------+-----------+-------------------------+
The internal representation of the IMEI and MSISDN is as follows:
IMEI encoding:
63 55 31 7 0
+-----------+-----------+----------------------+-------+
| TAC | SNR | SNV |
|N2|N1|N4|N3|N6|N5|N8|N7|N10|N9|N12|N11|N14|N13|N16|N15|
+-----------+-----------+-----------+------------------+
MSISDN encoding:
63 55 31 7 0
+-----------+-----------+----------------------+-------+
| CC | NDC | SN |
|N2|N1|N4|N3|N6|N5|N8|N7|N10|N9|N12|N11|N14|N13|N16|N15|
+-----------+-----------+-----------+------------------+
When the total number of digits in the IMEI or MSISDN is less than 15,
the nibble 0x0 is used a filler.
In each byte both nibbles are swapped and it is stored as shown in the
above format. For example, in the format N3 & N4 present the nibble
number 3 and 4 respectively and they are stored in reverse order.
When the total number of digits are odd in IMEI and MSISDB, the last
digit will be paired with nibble 0xf."
SYNTAX OCTET STRING (SIZE (8))
TmnxMobUeIdType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The data type TmnxMobUeIdType describes the types of identification
for User Equipment (UE)."
SYNTAX INTEGER {
imsi (0),
imei (1),
msisdn (2)
}
TmnxMobImsiStr ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The data type TmnxMobImsiStr describes the International Mobile
Subscriber Identity (IMSI) of a User Equipment (UE)."
REFERENCE
"3GPP TS 23.003 Numbering, addressing and identification,
section 2.2 Composition of IMSI."
SYNTAX DisplayString (SIZE (0|9..15))
TmnxMobRatingGrpState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The data type TmnxMobRatingGrpState describes the state of a rating
group.
allowFlow - Allow the traffic to flow disallowFlow - Disallow the
traffic to Flow redWebPortal - Redirect the traffic to web portal
allowResRules - Allow restricted rules iom1stPktTrigger - Get the
trigger from on IOM on arrival of 1st packet dis1stPktTrigger -
Disable 1st packet trigger and allow the traffic creditsToppedUp -
Credits topped up waitForFpt - Unblocked and waiting for First Packet
Trigger (FPT)"
SYNTAX INTEGER {
allowFlow (1),
disallowFlow (2),
redWebPortal (3),
allowResRules (4),
iom1stPktTrigger (5),
dis1stPktTrigger (6),
creditsToppedUp (7),
waitForFpt (8)
}
TmnxMobPresenceState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The data type TmnxMobPresenceState describes the whether the given
field is present."
SYNTAX INTEGER {
absent (0),
present (1)
}
TmnxMobPdnGyChrgTriggerType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The data type TmnxMobPdnGyChrgTriggerType describes type of the
trigger activated by the Online Charging System (OCS).
sgsnIpAddrRecvd - Change in Serving GPRS Support Node (SGSN) IP
address
qosRecvd - Change in Quality of Service (QoS)
locRecvd - Location Change
ratRecvd - Router Advertisement Trigger (RAT) Change
qosTrfClsRecvd - Change in QoS Traffic class
qosRlbClsRecvd - Change in QoS Reliability class
qosDlyClsRecvd - Change in QoS Delay class
qosPeakThrptRecvd - Change in QoS Peak Throughput
qosPrcClsRecvd - Change in QoS Precedence class
qosMeanTrptRecvd - Change in QoS Mean Throughput
qosMxBtRtUplnkRecvd - Change in QoS MBR for Uplink
qosMxBtRtDllnkRecvd - Change in QoS MBR for Downlink
qosResBerRecvd - Change in QoS Residual Bit Error Rate (BER)
qosSduErrRatRecvd - Change in QoS Service Data Unit (SDU) Error
Ratio class
qosTransDelayRecvd - Change in QoS Transfer Delay
qosTrfHndPriRecvd - Change in QoS Traffic Handling Priority
qosGrtBtRtUplnkRecvd - Change in QoS Guaranteed Bit Rate (GBR) for
Uplink
qosGrtBtRtDllnkRecvd - Change in QoS GBR for Downlink
locMccRecvd - Change in Location Mobile Country Code (MCC)
locMncRecvd - Change in Location Mobile Network Code (MNC)
locRacRecvd - Change in Location Routing Area Code (RAC)
locLacRecvd - Change in Location Location Area Code (LAC)
locCellIdRecvd - Change in Location Cell ID
medCompRecvd - Change in Media Composition
partcNmbRecvd - Change in Participants' number
thrldPartcNmbRecvd - Change in Threshold of Participants' number
usrPartcTypeRecvd - Change in User Participating Type
servCondRecvd - Change in Service Condition
servNodeRecvd - Change in Service Node
usrCsgInfoRecvd - Change in User Closed Subscription Group (CSG)
Information"
SYNTAX INTEGER {
sgsnIpAddrRecvd (0),
qosRecvd (1),
locRecvd (2),
ratRecvd (3),
qosTrfClsRecvd (4),
qosRlbClsRecvd (5),
qosDlyClsRecvd (6),
qosPeakThrptRecvd (7),
qosPrcClsRecvd (8),
qosMeanTrptRecvd (9),
qosMxBtRtUplnkRecvd (10),
qosMxBtRtDllnkRecvd (11),
qosResBerRecvd (12),
qosSduErrRatRecvd (13),
qosTransDelayRecvd (14),
qosTrfHndPriRecvd (15),
qosGrtBtRtUplnkRecvd (16),
qosGrtBtRtDllnkRecvd (17),
locMccRecvd (18),
locMncRecvd (19),
locRacRecvd (20),
locLacRecvd (21),
locCellIdRecvd (22),
medCompRecvd (23),
partcNmbRecvd (24),
thrldPartcNmbRecvd (25),
usrPartcTypeRecvd (26),
servCondRecvd (27),
servNodeRecvd (28),
usrCsgInfoRecvd (29)
}
TmnxMobPdnRefPointType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The data type TmnxMobPdnRefPointType describes the types of reference
point."
SYNTAX INTEGER {
s5 (1),
s8 (2),
gn (3),
s2a (4),
gp (5)
}
TmnxMobService ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The data type TmnxMobService describes the Service and Protocol
service names for 3GPP."
REFERENCE
"3GPP TS 23.003 Section 19.4.3"
SYNTAX DisplayString (SIZE (0..80))
TmnxMobServRefPointType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The data type TmnxMobServRefPointType describes the types of reference
point."
SYNTAX INTEGER {
s5 (1),
s8 (2),
s2a (4)
}
TmnxMobAccessType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The data type TmnxMobAccessType describes the various access types.
eps - evolved packet system.
gprs - general packet radio services.
non3gpp - trusted non-3gpp network such as evolved High Rate
Packet Data (eHRPD) and untrusted non-3gpp network."
SYNTAX INTEGER {
eps (1),
gprs (2),
non3gpp (3)
}
TmnxMobUeStrPrefix ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The data type TmnxMobUeStrPrefix describes the prefix for
International Mobile Subscriber Identity (IMSI) or Mobile Subscriber
Integrated Services Digital Network (MSISDN) of an User Equipment
(UE)."
SYNTAX DisplayString (SIZE (4..15))
END