david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
98a672123c
mibs/MIBS/nokia/aos7/ALCATEL-IND1-CHASSIS-MIB
David Leutgeb 98a672123c Initial commit
2023-12-05 12:25:34 +01:00

3473 lines
123 KiB
Plaintext
Raw Blame History

ALCATEL-IND1-CHASSIS-MIB DEFINITIONS ::= BEGIN
IMPORTS
OBJECT-TYPE,
OBJECT-IDENTITY,
MODULE-IDENTITY,
NOTIFICATION-TYPE,
Unsigned32, Integer32, IpAddress,
Counter32 FROM SNMPv2-SMI
PhysicalIndex,
entPhysicalIndex FROM ENTITY-MIB
hardentIND1Physical,
hardentIND1Chassis FROM ALCATEL-IND1-BASE
SnmpAdminString FROM SNMP-FRAMEWORK-MIB
MacAddress,
TruthValue,
DisplayString,
TEXTUAL-CONVENTION FROM SNMPv2-TC
MODULE-COMPLIANCE,
OBJECT-GROUP,
NOTIFICATION-GROUP FROM SNMPv2-CONF;
alcatelIND1ChassisMIB MODULE-IDENTITY
LAST-UPDATED "201103230000Z"
ORGANIZATION "Alcatel-Lucent, Enterprise Solutions Division"
CONTACT-INFO
"Please consult with Customer Service to ensure the most appropriate
version of this document is used with the products in question:
Alcatel-Lucent, Enterprise Solutions Division
(Formerly Alcatel Internetworking, Incorporated)
26801 West Agoura Road
Agoura Hills, CA 91301-5122
United States Of America
Telephone: North America +1 800 995 2696
Latin America +1 877 919 9526
Europe +31 23 556 0100
Asia +65 394 7933
All Other +1 818 878 4507
Electronic Mail: support@ind.alcatel.com
World Wide Web: http://alcatel-lucent.com/wps/portal/enterprise
File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs"
DESCRIPTION
"This module describes an authoritative enterprise-specific Simple
etwork Management Protocol (SNMP) Management Information Base (MIB):
For the Birds Of Prey Product Line, this is the Chassis Supervision
Chassis MIB
for managing physical chassis objects not covered in the IETF
Entity MIB (rfc 2737).
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 1995-2007 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE"
REVISION "201409020000Z"
DESCRIPTION
"Added chasEntPhysFanSpeed object."
REVISION "201110310000Z"
DESCRIPTION
"Added changes for virtual chassis."
REVISION "201110140000Z"
DESCRIPTION
"Added chasEntPhysPowerUsed object."
REVISION "201108050000Z"
DESCRIPTION
"Added chasEntTemperatureTable."
REVISION "201103230000Z"
DESCRIPTION
"Added image file MD5 checksum changed alert, airflow, and temperature alerts"
REVISION "201005130000Z"
DESCRIPTION
"Fixed the Notifications to use MIB Module OID.0 as Notifications root."
REVISION "200706180000Z"
DESCRIPTION
"Addressing discrepancies with Alcatel Standard."
::= { hardentIND1Chassis 1 }
alcatelIND1ChassisMIBNotifications OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For Chassis MIB Subsystem Notifications."
::= { alcatelIND1ChassisMIB 0 }
alcatelIND1ChassisMIBObjects OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For Chassis Supervision Chassis MIB
Subsystem Managed Objects."
::= { alcatelIND1ChassisMIB 1 }
alcatelIND1ChassisMIBConformance OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For Chassis Supervision Chassis MIB
Subsystem Conformance Information."
::= { alcatelIND1ChassisMIB 2 }
alcatelIND1ChassisMIBGroups OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For Chassis Supervision Chassis MIB
Subsystem Units Of Conformance."
::= { alcatelIND1ChassisMIBConformance 1 }
alcatelIND1ChassisMIBCompliances OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For Chassis Supervision Chassis MIB
Subsystem Compliance Statements."
::= { alcatelIND1ChassisMIBConformance 2 }
alcatelIND1ChassisPhysMIBObjects OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For Chassis Supervision Chassis Physical MIB
Subsystem Managed Objects."
::= { hardentIND1Physical 1 }
alcatelIND1ChassisPhysMIBConformance OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For Chassis Supervision Chassis Physical MIB
Subsystem Conformance Information."
::= { hardentIND1Physical 2 }
alcatelIND1ChassisPhysMIBGroups OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For Chassis Supervision Chassis Physical MIB
Subsystem Units Of Conformance."
::= { alcatelIND1ChassisPhysMIBConformance 1 }
alcatelIND1ChassisPhysMIBCompliances OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For Chassis Supervision Chassis Physical MIB
Subsystem Compliance Statements."
::= { alcatelIND1ChassisPhysMIBConformance 2 }
-- Textual Conventions
AlaChasBpsShelfId ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"BPS shelf Id ."
SYNTAX Integer32 (1..3)
ChasTrapsBPSPowerSupply ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Textual convention for type of bps power supply."
SYNTAX INTEGER
{
bpsSysPower1 (1),
bpsSysPower2 (2),
bpsPoePower1 (3),
bpsPoePower2 (4),
bpsPoePower3 (5),
notApplicable (6)
}
ChasTrapsBPSFetState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Textual convention for BPS FET state"
SYNTAX INTEGER
{
on (1),
off (2),
notApplicable (3)
}
ChasTrapsBPSEventAlert ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Textual convention for BPS event alert"
SYNTAX INTEGER
{
bpsPsPlugged (1),
bpsPsUnPlugged (2),
bpsModeChanged (3),
notApplicable (4)
}
ChasTrapsBPSFwType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Textual convention for BPS FW upgrade requirment alert"
SYNTAX INTEGER
{
bpsFwCmcu (1),
bpsFwMmcu (2),
bpsFwCpld (3),
notApplicable (4)
}
-- CONTROL MODULE TABLE
chasControlModuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF ChasControlModuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains one row for the primary control module."
::= { alcatelIND1ChassisMIBObjects 1 }
chasControlModuleEntry OBJECT-TYPE
SYNTAX ChasControlModuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about the primary control module. This table is an extension
of the entity physical table but this class is instanciated only for a
the primary control module that has a particular Index. When operatiing
in virtual chassis mode only the master primary control module is
instanciated"
INDEX { entPhysicalIndex }
::= { chasControlModuleTable 1 }
ChasControlModuleEntry ::= SEQUENCE
{
chasControlActivateTimeout Integer32,
chasControlVersionMngt INTEGER,
chasControlDelayedActivateTimer Unsigned32,
chasControlCertifyStatus INTEGER,
chasControlSynchronizationStatus INTEGER,
chasControlAcrossCmmWorkingSynchroStatus INTEGER,
chasControlAcrossCmmCertifiedSynchroStatus INTEGER,
chasControlNextRunningVersion SnmpAdminString,
chasControlCurrentRunningVersion SnmpAdminString,
chasControlWorkingVersion SnmpAdminString,
chasControlRedundancyTime Integer32,
chasControlEmpIpAddress IpAddress,
chasControlEmpIpMask IpAddress,
chasControlChassisId Integer32
}
chasControlActivateTimeout OBJECT-TYPE
SYNTAX Integer32 (0..900)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This value is in seconds. It represents how much time before the
switch automatically falls back to the certified version. This value
is set via the Activate(reload working) cli command.
An Activate reboot must be initiated via the primary CMM and that
the timeout value can be accessed via user interface to the primary CMM
only. After the Activate reboot has been initiated, a timeout will occur
(i.e., an Activate Timeout) at the timeout value specified by the user.
If a reboot cancel has not been received prior to the timeout expiration,
the primary CMM will automatically reboot (i.e., re-reboot) using the
certified configuration. This ensures that an automatic backup reboot is
available using the certified configuration in the event that the user
is unable to interface with primary CMM as a result of the attempted
Activate reboot. If the Activate reboot is successful, the user cancels
the backup reboot via the normal reboot cancellation process (i.e., a
zero value is written for the object chasControlDelayedRebootTimer)."
::= { chasControlModuleEntry 1 }
chasControlVersionMngt OBJECT-TYPE
SYNTAX INTEGER
{
notSignificant(1),
certifySynchro(2),
certifyNoSynchro(3),
flashSynchro(4),
restore(5),
activate(6),
issu(7),
shutdown(8),
vcConvert(9)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"For the primary this means:
notSignificant - No command applied.
certifySynchro - Copy the file from the working to the certified
directory and from the primary to the secondary
(reboot of the secondary).
certifyNoSynchro - Copy the file from the working to the certified
directory.
flashSynchro - Copy the file from the primary to the secondary
(reboot of the secondary).
restore - Copy the file from the certified directory to the
working directory.
activate - Reload from the working directory. Activate can be
scheduled.
issu - In Service Software Upgrade (ISSU).
shutdown - Shutdown chassis specified by chasControlChassisId.
Halts and powers off NIs, halts primary and
secondary CMMs.
vcConvert - Copy the image files from the running directory
to the working directory."
::= { chasControlModuleEntry 2 }
chasControlDelayedActivateTimer OBJECT-TYPE
SYNTAX Unsigned32 (0..31622400)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Timer value in seconds used to initiate a delayed activate of the primary
CMM. Writing this object to a non-zero value results in CMM reboot of the
working directory following expiration of the specified activate timer delay.
Writing this object to zero results in an immediately activate process.
It is now adjusted to wait a maximum of 366 days."
::= { chasControlModuleEntry 3 }
chasControlCertifyStatus OBJECT-TYPE
SYNTAX INTEGER
{
unknown(1),
needCertify(2),
certified(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Returned value indicates if the control module has been certified
(that is the working directory matches the certified directory)"
::= { chasControlModuleEntry 4 }
chasControlSynchronizationStatus OBJECT-TYPE
SYNTAX INTEGER
{
unknown(1),
monoControlModule(2),
notSynchronized(3),
synchronized(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Returned value indicates if the control module has been synchronized
(that is the working directory matches the working directory
on the other control module(s) if present). Returned value is
monoControlModule when no other control module is present."
::= { chasControlModuleEntry 5 }
chasControlAcrossCmmWorkingSynchroStatus OBJECT-TYPE
SYNTAX INTEGER
{
unknown(1),
monoCMM(2),
no(3),
yes(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Returned value indicates if the /working has been synchronized
across the CMMs (that is the working directory matches the working directory
on all CMMs if present)"
::= { chasControlModuleEntry 6 }
chasControlAcrossCmmCertifiedSynchroStatus OBJECT-TYPE
SYNTAX INTEGER
{
unknown(1),
monoCMM(2),
no(3),
yes(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Returned value indicates if the /certified has been synchronized
across the CMMs if present)"
::= { chasControlModuleEntry 7 }
chasControlNextRunningVersion OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The pathname for the image directory that will be
used on the next reload. Value may be /flash/certified
or /flash/<working directory name>."
::= { chasControlModuleEntry 8 }
chasControlCurrentRunningVersion OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The pathname of the image directory to the version
that is currently executing. Value may be /flash/certified
or /flash/<working directory name>."
::= { chasControlModuleEntry 9 }
chasControlWorkingVersion OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The path to the currently specified working image directory.
Value may be /flash/certified or /flash/<working directory name>."
::= { chasControlModuleEntry 10 }
chasControlRedundancyTime OBJECT-TYPE
SYNTAX Integer32 (0..900)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Time in minutes that the running image must stay up without error
before a subsequent error reset will restart the board from the
running image. If a CMM in dual-CMM switch fails after a reload
and before chasControlRedundancyTime expires, both CMMs will be
rebooted from the certified version."
::= { chasControlModuleEntry 11 }
chasControlEmpIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"This object is deprecated. Instead use alaInterfaceTable(ALCATEL-IND1-IP-MIB)
when configuring EMP interfaces.
The IP Address for the primary control module EMP interface.
This address is used for managing the chassis and will
continue as the EMP interface address after a takeover."
::= { chasControlModuleEntry 12 }
chasControlEmpIpMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"This object is deprecated. Instead use alaInterfaceTable(ALCATEL-IND1-IP-MIB)
when configuring EMP interfaces.
The IP Address Mask for the primary control module EMP interface.
This address mask is used for managing the chassis and will
continue as the EMP interface mask after a takeover."
::= { chasControlModuleEntry 13 }
chasControlChassisId OBJECT-TYPE
SYNTAX Integer32 (0..16)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The virtual chassis id for the action specified by
chasControlVersionMngt when operating in virtual
chassis mode. A value of 0 indicates the local
chassis."
::= { chasControlModuleEntry 14 }
-- CONTROL REDUNDANT TABLE
chasControlRedundantTable OBJECT-TYPE
SYNTAX SEQUENCE OF ChasControlRedundantEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains one row per control module. There is always at least
one control module in the system."
::= { alcatelIND1ChassisMIBObjects 2 }
chasControlRedundantEntry OBJECT-TYPE
SYNTAX ChasControlRedundantEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular control module this table is an extension
of the entity physical table but this class is instanciated only for a
particular type of physical entity: the control module that has a
particular Index. When running in virtual chassis mode, entries are
instantiated for the Master and all the slave CMMs"
INDEX { entPhysicalIndex }
::= { chasControlRedundantTable 1 }
ChasControlRedundantEntry ::= SEQUENCE
{
chasControlNumberOfTakeover Counter32,
chasControlDelayedRebootTimer Unsigned32,
chasControlDelayedResetAll Integer32
}
chasControlNumberOfTakeover OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is a count of the number of times the control module has
changed from primary to secondary mode as a result of a Takeover. Note
that this object can be accessed via user interface to either the
primary or secondary CMM. The value returned is the number of times
that the interfacing control module (either primary or secondary CMM)
has changed from primary to secondary mode. This value does not reflect
the total number of CMM Takeovers for the switch. To get the total
number of Takeovers for the switch, it is necessary to read this value
via user interface to each control module independently."
::= { chasControlRedundantEntry 1 }
chasControlDelayedRebootTimer OBJECT-TYPE
SYNTAX Unsigned32 (0.. 31622400)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Timer value (in seconds) used to initiate a delayed reboot of the primary
or secondary CMM using the certified configuration. Writing this object to
a non-zero value results in a CMM reboot following expiration of the
specified reset timer delay. Writing this object to zero results in
cancellation of a pending CMM delayed reboot.
It is now adjusted to wait a maximum of 366 days."
::= { chasControlRedundantEntry 2 }
chasControlDelayedResetAll OBJECT-TYPE
SYNTAX Integer32 (-1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to schedule a delayed reset all action for a chassis
when running in virtual chassis mode. If set to -1 - cancel the timer,
0 - reset all immediately, any other value will start counting down the
time until reset."
DEFVAL { -1 }
::= { chasControlRedundantEntry 3 }
-- CHASSIS TABLE
chasChassisTable OBJECT-TYPE
SYNTAX SEQUENCE OF ChasChassisEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains one row per chassis. There is always at least one
chassis or many when running in virtual chassis mode."
::= { alcatelIND1ChassisMIBObjects 3 }
chasChassisEntry OBJECT-TYPE
SYNTAX ChasChassisEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular control module this table is an extension
of the entity physical table but this class is instanciated only for a
particular type of physical entity: the control module that has a
particular Index."
INDEX { entPhysicalIndex }
::= { chasChassisTable 1 }
ChasChassisEntry ::= SEQUENCE
{
chasFreeSlots Unsigned32,
chasPowerLeft Integer32,
chasNumberOfResets Counter32,
chasTempRange INTEGER,
chasTempThreshold Integer32,
chasDangerTempThreshold Integer32,
chasPrimaryPhysicalIndex Integer32,
chasCPMAHardwareBoardTemp Integer32,
chasCFMAHardwareBoardTemp Integer32,
chasCPMBHardwareBoardTemp Integer32,
chasCFMBHardwareBoardTemp Integer32,
chasCFMCHardwareBoardTemp Integer32,
chasCFMDHardwareBoardTemp Integer32,
chasFTAHardwareBoardTemp Integer32,
chasFTBHardwareBoardTemp Integer32,
chasNI1HardwareBoardTemp Integer32,
chasNI2HardwareBoardTemp Integer32,
chasNI3HardwareBoardTemp Integer32,
chasNI4HardwareBoardTemp Integer32,
chasNI5HardwareBoardTemp Integer32,
chasNI6HardwareBoardTemp Integer32,
chasNI7HardwareBoardTemp Integer32,
chasNI8HardwareBoardTemp Integer32,
chasPowerSupplyRedundancy INTEGER,
chasPowerSupplyRedundancyReserve INTEGER
}
chasFreeSlots OBJECT-TYPE
SYNTAX Unsigned32 (0..18)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of free NI front panel slots."
::= { chasChassisEntry 1 }
chasPowerLeft OBJECT-TYPE
SYNTAX Integer32 (-100000..100000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The power still available on the chassis in Watts."
::= { chasChassisEntry 2 }
chasNumberOfResets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is a count of the number of times this station has been reset
since a cold-start."
::= { chasChassisEntry 3 }
chasTempRange OBJECT-TYPE
SYNTAX INTEGER
{
unknown(1),
notPresent(2),
underThreshold(3),
overFirstThreshold(4),
overDangerThreshold(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Temp Range is the value of the temperature sensor for the chassis. The
Temp Range value reflects the temperature of the chassis relative to the
Temp Threshold value (i.e., over vs. under the threshold)."
::= { chasChassisEntry 4 }
chasTempThreshold OBJECT-TYPE
SYNTAX Integer32 (1..150)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is the threshold temperature in degrees Celsius for the
chassis. Temp Threshold is the chassis temperature point at which,
when reached due to an ascending or descending temperature transition,
a temperature notification is provided to the user. When this threshold
is exceeded, we start sending traps and other operator notification."
::= { chasChassisEntry 5 }
chasDangerTempThreshold OBJECT-TYPE
SYNTAX Integer32 (30..150)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This Threshold is a second one which is hardcoded. When the
Chassis Exceeds this value it starts shutting down NIs.
This value will be set by the factory and not changeable."
::= { chasChassisEntry 6 }
chasPrimaryPhysicalIndex OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value holds the Entity Table Physical Index for the Control
Module that is currently primary. This is to allow snmp managers
to determine which Control Module is currently primary so it knows
what entry in the chasControlModuleTable to access for setting the
chasControlVersionMngt values for controling the switch. When running
in virtual chassis mode, it will contain the Physical Index of the
master primary Control Module."
::= { chasChassisEntry 7 }
chasCPMAHardwareBoardTemp OBJECT-TYPE
SYNTAX Integer32 (0..200)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the current output of the Board Temperature
Sensor provided by the LM75 part (degrees Centigrade) for the
CPMA control module board. This temperature is what is used for
comparing to the threshold and determining whether the value
is in range."
::= { chasChassisEntry 8 }
chasCFMAHardwareBoardTemp OBJECT-TYPE
SYNTAX Integer32 (0..200)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the current output of the Board Temperature
Sensor provided by the LM75 part (degrees Centigrade) for the
CFMA fabric board. This temperature is what is used for comparing
to the threshold and determining whether the value is in range."
::= { chasChassisEntry 9 }
chasCPMBHardwareBoardTemp OBJECT-TYPE
SYNTAX Integer32 (0..200)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the current output of the Board Temperature
Sensor provided by the LM75 part (degrees Centigrade) for the
CPMB control module board. This temperature is what is used for
comparing to the threshold and determining whether the value
is in range."
::= { chasChassisEntry 10 }
chasCFMBHardwareBoardTemp OBJECT-TYPE
SYNTAX Integer32 (0..200)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the current output of the Board Temperature
Sensor provided by the LM75 part (degrees Centigrade) for the
CFMB fabric board. This temperature is what is used for comparing
to the threshold and determining whether the value is in range."
::= { chasChassisEntry 11 }
chasCFMCHardwareBoardTemp OBJECT-TYPE
SYNTAX Integer32 (0..200)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the current output of the Board Temperature
Sensor provided by the LM75 part (degrees Centigrade) for the
CFMC fabric board. This temperature is what is used for comparing
to the threshold and determining whether the value is in range."
::= { chasChassisEntry 12 }
chasCFMDHardwareBoardTemp OBJECT-TYPE
SYNTAX Integer32 (0..200)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the current output of the Board Temperature
Sensor provided by the LM75 part (degrees Centigrade) for the
CFMD fabric board. This temperature is what is used for comparing
to the threshold and determining whether the value is in range."
::= { chasChassisEntry 13 }
chasFTAHardwareBoardTemp OBJECT-TYPE
SYNTAX Integer32 (0..200)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the current output of the Board Temperature
Sensor provided by the LM75 part (degrees Centigrade) for
Fantray 1. This temperature is what is used for comparing
to the threshold and determining whether the value is in range."
::= { chasChassisEntry 14 }
chasFTBHardwareBoardTemp OBJECT-TYPE
SYNTAX Integer32 (0..200)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the current output of the Board Temperature
Sensor provided by the LM75 part (degrees Centigrade) for
Fantry 2. This temperature is what is used for comparing
to the threshold and determining whether the value is in range."
::= { chasChassisEntry 15 }
chasNI1HardwareBoardTemp OBJECT-TYPE
SYNTAX Integer32 (0..200)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the current output of the Board Temperature
Sensor provided by the LM75 part (degrees Centigrade) for the
NI board in slot 1. This temperature is what is used for comparing
to the threshold and determining whether the value is in range."
::= { chasChassisEntry 16 }
chasNI2HardwareBoardTemp OBJECT-TYPE
SYNTAX Integer32 (0..200)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the current output of the Board Temperature
Sensor provided by the LM75 part (degrees Centigrade) for the
NI board in slot 2. This temperature is what is used for comparing
to the threshold and determining whether the value is in range."
::= { chasChassisEntry 17 }
chasNI3HardwareBoardTemp OBJECT-TYPE
SYNTAX Integer32 (0..200)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the current output of the Board Temperature
Sensor provided by the LM75 part (degrees Centigrade) for the
NI board in slot 3. This temperature is what is used for comparing
to the threshold and determining whether the value is in range."
::= { chasChassisEntry 18 }
chasNI4HardwareBoardTemp OBJECT-TYPE
SYNTAX Integer32 (0..200)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the current output of the Board Temperature
Sensor provided by the LM75 part (degrees Centigrade) for the
NI board in slot 4. This temperature is what is used for comparing
to the threshold and determining whether the value is in range."
::= { chasChassisEntry 19 }
chasNI5HardwareBoardTemp OBJECT-TYPE
SYNTAX Integer32 (0..200)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the current output of the Board Temperature
Sensor provided by the LM75 part (degrees Centigrade) for the
NI board in slot 5. This temperature is what is used for comparing
to the threshold and determining whether the value is in range."
::= { chasChassisEntry 20 }
chasNI6HardwareBoardTemp OBJECT-TYPE
SYNTAX Integer32 (0..200)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the current output of the Board Temperature
Sensor provided by the LM75 part (degrees Centigrade) for the
NI board in slot 6. This temperature is what is used for comparing
to the threshold and determining whether the value is in range."
::= { chasChassisEntry 21 }
chasNI7HardwareBoardTemp OBJECT-TYPE
SYNTAX Integer32 (0..200)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the current output of the Board Temperature
Sensor provided by the LM75 part (degrees Centigrade) for the
NI board in slot 7. This temperature is what is used for comparing
to the threshold and determining whether the value is in range."
::= { chasChassisEntry 22 }
chasNI8HardwareBoardTemp OBJECT-TYPE
SYNTAX Integer32 (0..200)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the current output of the Board Temperature
Sensor provided by the LM75 part (degrees Centigrade) for the
NI board in slot 8. This temperature is what is used for comparing
to the threshold and determining whether the value is in range."
::= { chasChassisEntry 23 }
chasPowerSupplyRedundancy OBJECT-TYPE
SYNTAX INTEGER
{
on(1),
off(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the state of power supply redundancy mode.
When on(1), N+1 mode redundancy is enabled(default mode). In
this mode the system controls the power supplies to maintain
efficient use of the power supplies, with 1 extra power supply
in case of a power supply failure. Unneeded power supplies are
powered off. It can be set to off(2) to disable redundancy mode.
In this mode all power supplies are powered on.
This object is applicable only to OS10K devices."
DEFVAL { on }
::= { chasChassisEntry 24 }
chasPowerSupplyRedundancyReserve OBJECT-TYPE
SYNTAX INTEGER
{
on(1),
off(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When chasPowerSupplyRedundancyReserve is enabled, N+1 power supply
redundancy reserve holds the wattage of one power supply in reserve
such that the user cannot insert NIs or configure power over Ethernet (POE)
that will use the reserved power from that supply. There are two main advantages
to enabling chasPowerSupplyRedundancyReserve. The first advantage is that
it provides resiliency to avoid POE drawing power from the four main power supplies
in the OS9900 chassis to the extent that POE sinks much more wattage than
the CMM, CFM, and NI board logic combined. (Note: The power management functions
on the OS9900 are complicated by the presence of the controllers on the GNI-P48 boards.
Unlike other chassis supporting POE, like OS6860, there is no separate power supply
for the POE front-panel ports.) This is not to be confused with chasPowerSupplyRedundancy
which switches off unneeded power supplies - on the OS9900, all inserted power supplies
are always switched on and enabled. The second advantage of enabling
chasPowerSupplyRedundancyReserve is to avoid 'brown-outs'.
(A brown-out may happen when a system running at full POE capacity without the N+1 redundancy reserve
enabled suffers a power supply failure causing the POE hardware to immediately
disable power over Ethernet on the basis of port priority as soon as it detects the failure.
Then, if there is still insufficient power available to run the logic and fan trays,
the power supplies will 'crowbar' and the system will be power cycled. The software can
do little in this scenario since there is insufficient power to keep the CPU chips running.
When the system reboots the chassis supervisor will only power-up NI slots based
upon the power available from the remaining power supplies.)"
DEFVAL { on }
::= { chasChassisEntry 25 }
-- Extension of the Entity physical table
chasEntPhysicalTable OBJECT-TYPE
SYNTAX SEQUENCE OF ChasEntPhysicalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains one row per physical entity. It is an extension for
the entity physical table (rfc 2737) that is instantiated for every physical entity
object. The fields are not always significant for every object."
::= { alcatelIND1ChassisPhysMIBObjects 1 }
chasEntPhysicalEntry OBJECT-TYPE
SYNTAX ChasEntPhysicalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular physical entity."
INDEX { entPhysicalIndex }
::= { chasEntPhysicalTable 1 }
ChasEntPhysLed ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Textual convention for physical LEDs. Note: Due to European regulation, the LEDs
will never be illuminated in red, but will be either green or amber."
SYNTAX INTEGER {
notApplicable (0),
off (1),
greenOn (2),
greenBlink (3),
amberOn (4),
amberBlink (5)
}
ChasEntPhysicalEntry ::= SEQUENCE
{
chasEntPhysAdminStatus INTEGER,
chasEntPhysOperStatus INTEGER,
chasEntPhysPower Integer32,
chasEntPhysModuleType SnmpAdminString,
chasEntPhysPartNumber SnmpAdminString,
chasEntPhysLedStatusOk1 ChasEntPhysLed,
chasEntPhysLedStatusOk2 ChasEntPhysLed,
chasEntPhysLedStatusPrimaryCMM ChasEntPhysLed,
chasEntPhysLedStatusSecondaryCMM ChasEntPhysLed,
chasEntPhysLedStatusTemperature ChasEntPhysLed,
chasEntPhysLedStatusFan ChasEntPhysLed,
chasEntPhysLedStatusBackupPS ChasEntPhysLed,
chasEntPhysLedStatusInternalPS ChasEntPhysLed,
chasEntPhysLedStatusControl ChasEntPhysLed,
chasEntPhysLedStatusFabric ChasEntPhysLed,
chasEntPhysLedStatusPS ChasEntPhysLed,
chasEntPhysAsic1Rev SnmpAdminString,
chasEntPhysAsic2Rev SnmpAdminString,
chasEntPhysAsic3Rev SnmpAdminString,
chasEntPhysAsic4Rev SnmpAdminString,
chasEntPhysAsic5Rev SnmpAdminString,
chasEntPhysAsic6Rev SnmpAdminString,
chasEntPhysCpldRev SnmpAdminString,
chasEntPhysDaughterFpga1Rev SnmpAdminString,
chasEntPhysDaughterFpga2Rev SnmpAdminString,
chasEntPhysNiNum Integer32,
chasEntPhysGbicNum Integer32,
chasEntPhysWaveLen Integer32,
chasEntPhysUbootRev SnmpAdminString,
chasEntPhysUbootMinibootRev SnmpAdminString,
chasEntPhysMacAddress MacAddress,
chasEntPhysCpuModel SnmpAdminString,
chasEntPhysAirflow INTEGER,
chasEntPhysPowerUsed Integer32,
chasEntPhysPowerType INTEGER
}
chasEntPhysAdminStatus OBJECT-TYPE
SYNTAX INTEGER
{
unknown(1),
powerOff(2),
powerOn(3),
reset(4),
takeover(5),
resetAll(6),
standby(7),
resetWithFabric(8),
takeoverWithFabrc(9),
vcTakeover(10),
resetVcAll(11)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"All modules (even empty slots) are in unknown state when the chassis
first powers up.
Chassis status possible value:
powerOn <=> powered up
Control Module possible value:
powerOn <=> CM up and running
reset <=> CM reset
takeover <=> Secondary CM takes over
resetAll <=> resets the whole switch
vcTakeover <=> Reloads master chassis from the current working directory,
which initiates a VC takeover.
vcResetAll <=> resets entire VC.
NI status possible value:
powerOn <=> NI is either powered (up or down) or waiting to be powered
whenever more power is available. This admin status has not full meaning
without chasEntPhysOperStatus
powerOff <=> NI down and unpowered and NI will not be powered until user
requests it, a failover happens or a reboot happens
reset <=> NI reset
FABRIC status possible value:
powerOn <=> FABRIC is powered
powerOff <=> FABRIC is unpowered
standby <=> FABRIC is powered and requested to be redundant (inactive)
Daughter board status possible value:
powerOn <=> DB up and running
reset <=> DB reset (TO BE CONFIRMED)
Power supply status possible value:
powerOn <=> PS up"
::= { chasEntPhysicalEntry 1 }
chasEntPhysOperStatus OBJECT-TYPE
SYNTAX INTEGER
{
up(1),
down(2),
testing(3),
unknown(4),
secondary(5),
notPresent(6),
unpowered(7),
master(8),
idle(9),
pwrsave(10)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"All modules (even empty slots) are in unknown state when the chassis
first powers up.
Chassis status possible value :
up <=> powered up
Control Module possible value :
notPresent <=> CM not present
up <=> CM up and running
down <=> CM down and powered
secondary <=> CM in secondary mode and running
NI status possible value :
notPresent <=> NI not present
up <=> NI up and running
down <=> NI down and powered
unpowered <=> NI unpowered because there is not enough power in the system
(chasEntPhysAdminStatus = powerOn) or because the NI has to be OFF
(chasEntPhysAdminStatus = powerOff). This operational status has
not full meaning without chasEntPhysAdminStatus
Fabric status possible value :
master <=> up and acting as master
up <=> up and acting as slave
secondary <=> secondary mode for redundancy
Daughter board status possible value :
notPresent <=> DB not present
up <=> DB up and running
down <=> DB down and powered
Power supply status possible value :
up <=> PS up
down <=> PS administratively down
unpowered <=> PS not plugged in
pwrsave <=> chassis in powersave mode, supply turned off
Fan Tray status possible value :
up <=> powered up
down <=> powered down
fault <=> fault detected"
::= { chasEntPhysicalEntry 2 }
chasEntPhysPower OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value is only applicable to the NI, PS and Control Modules. It
corresponds to a a static value for the power consumption of an NI
module or Control Module. This value is in Watts."
::= { chasEntPhysicalEntry 3 }
chasEntPhysModuleType OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is the unique Module Type or ID from the entities eeprom.
This value is guarrantteed to be unique to each type of Module.
This value is only intended for Alcatel internal use."
::= { chasEntPhysicalEntry 4 }
chasEntPhysPartNumber OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the Alcatel Part Number for the entity.
This value is used to identify what is
needed when placing orders with Alcatel."
::= { chasEntPhysicalEntry 5 }
chasEntPhysLedStatusOk1 OBJECT-TYPE
SYNTAX ChasEntPhysLed
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Chassis Management Module (CMM) front panel LED OK1 status indication"
::= { chasEntPhysicalEntry 6 }
chasEntPhysLedStatusOk2 OBJECT-TYPE
SYNTAX ChasEntPhysLed
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Chassis Management Module (CMM) front panel LED OK2 status indication"
::= { chasEntPhysicalEntry 7 }
chasEntPhysLedStatusPrimaryCMM OBJECT-TYPE
SYNTAX ChasEntPhysLed
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Chassis Management Module (CMM) front panel LED Primary chassis indication"
::= { chasEntPhysicalEntry 8 }
chasEntPhysLedStatusSecondaryCMM OBJECT-TYPE
SYNTAX ChasEntPhysLed
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Chassis Management Module (CMM) front panel LED Secondary chassis indication"
::= { chasEntPhysicalEntry 9 }
chasEntPhysLedStatusTemperature OBJECT-TYPE
SYNTAX ChasEntPhysLed
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Chassis Management Module (CMM) front panel LED temperature status indication"
::= { chasEntPhysicalEntry 10 }
chasEntPhysLedStatusFan OBJECT-TYPE
SYNTAX ChasEntPhysLed
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For Hawk stacks used as a fan group status LED. For eagle CMM's user instead:
Fan 1 (top left), Fan 2 (top right), Fan 3 (rear)"
::= { chasEntPhysicalEntry 11 }
chasEntPhysLedStatusBackupPS OBJECT-TYPE
SYNTAX ChasEntPhysLed
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Chassis backup power supply status indication"
::= { chasEntPhysicalEntry 12 }
chasEntPhysLedStatusInternalPS OBJECT-TYPE
SYNTAX ChasEntPhysLed
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Chassis internal power supply status indication"
::= { chasEntPhysicalEntry 13 }
chasEntPhysLedStatusControl OBJECT-TYPE
SYNTAX ChasEntPhysLed
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Chassis control status"
::= { chasEntPhysicalEntry 14 }
chasEntPhysLedStatusFabric OBJECT-TYPE
SYNTAX ChasEntPhysLed
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Chassis Management Module (CMM) Fabric status indication"
::= { chasEntPhysicalEntry 15 }
chasEntPhysLedStatusPS OBJECT-TYPE
SYNTAX ChasEntPhysLed
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Chassis Power Supply Unit status indication"
::= { chasEntPhysicalEntry 16 }
chasEntPhysAsic1Rev OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..14))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the ASIC revision Number of the ni entity"
::= { chasEntPhysicalEntry 17 }
chasEntPhysAsic2Rev OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..14))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the ASIC revision Number of the ni entity"
::= { chasEntPhysicalEntry 18 }
chasEntPhysAsic3Rev OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..14))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the ASIC revision Number of the ni entity"
::= { chasEntPhysicalEntry 19 }
chasEntPhysAsic4Rev OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..14))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the ASIC revision Number of the ni entity"
::= { chasEntPhysicalEntry 20 }
chasEntPhysAsic5Rev OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..14))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the ASIC revision Number of the ni entity"
::= { chasEntPhysicalEntry 21 }
chasEntPhysAsic6Rev OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..14))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the ASIC revision Number of the ni entity"
::= { chasEntPhysicalEntry 22 }
chasEntPhysCpldRev OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..14))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the CPLD revision Number of the ni entity"
::= { chasEntPhysicalEntry 23 }
chasEntPhysDaughterFpga1Rev OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..14))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the daughter fpga revision Number of the ni entity"
::= { chasEntPhysicalEntry 24 }
chasEntPhysDaughterFpga2Rev OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..14))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the daughter fpga revision Number of the ni entity"
::= { chasEntPhysicalEntry 25 }
chasEntPhysNiNum OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value is only applicable to the NI. It indicates an NI associated with this physicalEntry"
::= { chasEntPhysicalEntry 26 }
chasEntPhysGbicNum OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value is only applicable to the NI. It indicates a gbic associated with this ni"
::= { chasEntPhysicalEntry 27 }
chasEntPhysWaveLen OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the wave length of a SFP device"
::= { chasEntPhysicalEntry 28 }
chasEntPhysUbootRev OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..14))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the uboot version Number of the ni entity"
::= { chasEntPhysicalEntry 29 }
chasEntPhysUbootMinibootRev OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..14))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the uboot miniboot version Number of the ni entity"
::= { chasEntPhysicalEntry 30 }
chasEntPhysMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the MAC address of the ni entity"
::= { chasEntPhysicalEntry 31 }
chasEntPhysCpuModel OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the model description of the cmm/ni cpu"
::= { chasEntPhysicalEntry 32 }
chasEntPhysAirflow OBJECT-TYPE
SYNTAX INTEGER {
frontToRear(0),
rearToFront(1),
notApplicable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Chassis PS fan airflow direction"
::= { chasEntPhysicalEntry 33 }
chasEntPhysPowerUsed OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value is only applicable to the PS. It is the current
reading for the power usage of the PS. This value is in Watts."
::= { chasEntPhysicalEntry 34 }
chasEntPhysPowerType OBJECT-TYPE
SYNTAX INTEGER{
notApplicable(0),
ac(1),
dc(2),
bps(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is the type of the power supply, It corresponds to AC,
DC or BPS. This value is only intended for Alcatel internal use."
::= { chasEntPhysicalEntry 35 }
-- Extension of the Entity physical table
chasEntTemperatureTable OBJECT-TYPE
SYNTAX SEQUENCE OF ChasEntTemperatureEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains one row per temperature sensor located on an entity
represented by the associated row in the entPhysicalTable."
::= { alcatelIND1ChassisPhysMIBObjects 2 }
chasEntTemperatureEntry OBJECT-TYPE
SYNTAX ChasEntTemperatureEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular physical temperature sensor."
INDEX { entPhysicalIndex }
::= { chasEntTemperatureTable 1 }
ChasEntTemperatureEntry ::= SEQUENCE
{
chasEntTempCurrent Integer32,
chasEntTempThreshold Integer32,
chasEntTempDangerThreshold Integer32,
chasEntTempStatus INTEGER
}
chasEntTempCurrent OBJECT-TYPE
SYNTAX Integer32 (0..200)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the current output of the temperature
sensor in degrees Celsius."
::= { chasEntTemperatureEntry 1 }
chasEntTempThreshold OBJECT-TYPE
SYNTAX Integer32 (1..150)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is the threshold temperature in degrees Celsius for the
sensor. When the value of chasEntTempCurrent exceeds this value,
a temperature notification is provided to the user."
::= { chasEntTemperatureEntry 2 }
chasEntTempDangerThreshold OBJECT-TYPE
SYNTAX Integer32 (30..150)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is the danger threshold temperature in degrees Celsius for
the sensor. When the value of chasEntTempCurrent exceeds this value, the
associated physical entity is powered down."
::= { chasEntTemperatureEntry 3 }
chasEntTempStatus OBJECT-TYPE
SYNTAX INTEGER
{
unknown(1),
notPresent(2),
underThreshold(3),
overFirstThreshold(4),
overDangerThreshold(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is the status value of the temperature sensor.
It reflects the temperature relative to the chasEntTempThreshold
and chasEntTempDangerThreshold values."
::= { chasEntTemperatureEntry 4 }
-- CHASSIS SUPERVISION RFS TABLES
chasSupervisionRfsLsTable OBJECT-TYPE
SYNTAX SEQUENCE OF ChasSupervisionRfsLsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains a list of file on the remote chassis per directory."
::= { alcatelIND1ChassisMIBObjects 4 }
chasSupervisionRfsLsEntry OBJECT-TYPE
SYNTAX ChasSupervisionRfsLsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a remote file.
A row in this table contains a file per directory per chassis"
INDEX { chasSupervisionRfsLsFileIndex }
::= { chasSupervisionRfsLsTable 1 }
ChasSupervisionRfsLsEntry ::= SEQUENCE
{
chasSupervisionRfsLsFileIndex Integer32,
chasSupervisionRfsLsSlot Unsigned32,
chasSupervisionRfsLsDirName SnmpAdminString,
chasSupervisionRfsLsFileName SnmpAdminString,
chasSupervisionRfsLsFileType INTEGER,
chasSupervisionRfsLsFileSize Unsigned32,
chasSupervisionRfsLsFileAttr INTEGER,
chasSupervisionRfsLsFileDateTime SnmpAdminString
}
chasSupervisionRfsLsFileIndex OBJECT-TYPE
SYNTAX Integer32 (1..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value holds file Index for the RFS LS table."
::= { chasSupervisionRfsLsEntry 1}
chasSupervisionRfsLsSlot OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"CMM Slot where remote file is located."
::= { chasSupervisionRfsLsEntry 2}
chasSupervisionRfsLsDirName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The remote directory name where remote file is located in"
DEFVAL { "/flash" }
::= { chasSupervisionRfsLsEntry 3 }
chasSupervisionRfsLsFileName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..33))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The file name of remote file"
DEFVAL { "" }
::= { chasSupervisionRfsLsEntry 4 }
chasSupervisionRfsLsFileType OBJECT-TYPE
SYNTAX INTEGER {
file(1),
directory(2),
undefined(3),
tarArchive(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The Type of a remote file"
DEFVAL { undefined }
::= { chasSupervisionRfsLsEntry 5 }
chasSupervisionRfsLsFileSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "size of this remote file"
DEFVAL { 0 }
::= { chasSupervisionRfsLsEntry 6 }
chasSupervisionRfsLsFileAttr OBJECT-TYPE
SYNTAX INTEGER {
undefined(1),
readOnly(2),
readWrite(3),
writeOnly(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "attributes of this remote file"
DEFVAL { undefined }
::= { chasSupervisionRfsLsEntry 7 }
chasSupervisionRfsLsFileDateTime OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the modification date and time of a remote file"
DEFVAL { "" }
::= { chasSupervisionRfsLsEntry 8 }
chasSupervisionRfsDfTable OBJECT-TYPE
SYNTAX SEQUENCE OF ChasSupervisionRfsDfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table contains information about file system size and use."
::= { alcatelIND1ChassisMIBObjects 8 }
chasSupervisionRfsDfEntry OBJECT-TYPE
SYNTAX ChasSupervisionRfsDfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This entry contains information about file system size and use."
INDEX { chasSupervisionRfsDfSlot }
::= { chasSupervisionRfsDfTable 1 }
ChasSupervisionRfsDfEntry ::= SEQUENCE
{
chasSupervisionRfsDfSlot Integer32,
chasSupervisionRfsDfFlashFree Unsigned32,
chasSupervisionRfsDfFlashSize Unsigned32,
chasSupervisionRfsDfUsbFree Unsigned32,
chasSupervisionRfsDfUsbSize Unsigned32
}
chasSupervisionRfsDfSlot OBJECT-TYPE
SYNTAX Integer32 (1..16)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"CMM Slot where flash space is evaluated."
::= { chasSupervisionRfsDfEntry 1}
chasSupervisionRfsDfFlashFree OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number bytes free on the file system."
::= { chasSupervisionRfsDfEntry 2}
chasSupervisionRfsDfFlashSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of total bytes on the file system."
::= { chasSupervisionRfsDfEntry 3}
chasSupervisionRfsDfUsbFree OBJECT-TYPE
SYNTAX Unsigned32
UNITS "kb"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of free space on the USB file system."
::= { chasSupervisionRfsDfEntry 4}
chasSupervisionRfsDfUsbSize OBJECT-TYPE
SYNTAX Unsigned32
UNITS "kb"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total amount of space on the USB file system."
::= { chasSupervisionRfsDfEntry 5}
chasSupervisionFlashMemTable OBJECT-TYPE
SYNTAX SEQUENCE OF ChasSupervisionFlashMemEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table contains the systems flash memory information."
::= { alcatelIND1ChassisMIBObjects 9 }
chasSupervisionFlashMemEntry OBJECT-TYPE
SYNTAX ChasSupervisionFlashMemEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This contains one entry for the flash memory table."
INDEX { chasSupervisionSlot }
::= { chasSupervisionFlashMemTable 1 }
ChasSupervisionFlashMemEntry ::= SEQUENCE
{
chasSupervisionSlot Integer32,
chasSupervisionFlashSize Unsigned32,
chasSupervisionFlashFree Unsigned32,
chasSupervisionFlashUsed Integer32
}
chasSupervisionSlot OBJECT-TYPE
SYNTAX Integer32 (1..16)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"CMM Slot where flash space is evaluated."
::= { chasSupervisionFlashMemEntry 1}
chasSupervisionFlashSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Flash memory size."
::= { chasSupervisionFlashMemEntry 2}
chasSupervisionFlashFree OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number bytes free on file system."
::= { chasSupervisionFlashMemEntry 3}
chasSupervisionFlashUsed OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A rounded up percentage of Flash Memory used."
::= { chasSupervisionFlashMemEntry 4}
chasSupervisionCmmCertifiedTable OBJECT-TYPE
SYNTAX SEQUENCE OF ChasSupervisionCmmCertifiedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table contains certification status"
::= { alcatelIND1ChassisMIBObjects 10 }
chasSupervisionCmmCertifiedEntry OBJECT-TYPE
SYNTAX ChasSupervisionCmmCertifiedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about control module certification status. This class is
instanciated only when running in virtual chassis mode."
INDEX { chasSupervisionCmmNum }
::= { chasSupervisionCmmCertifiedTable 1 }
ChasSupervisionCmmCertifiedEntry ::= SEQUENCE
{
chasSupervisionCmmNum Integer32,
chasSupervisionCmmCertifiedStatus INTEGER
}
chasSupervisionCmmNum OBJECT-TYPE
SYNTAX Integer32 (1..16)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"CMM Slot where /certified directory is evaluated."
::= { chasSupervisionCmmCertifiedEntry 1}
chasSupervisionCmmCertifiedStatus OBJECT-TYPE
SYNTAX INTEGER
{
notPresent(0),
yes(1),
no(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The status of the CMM certified directory - certified or not."
::= { chasSupervisionCmmCertifiedEntry 2}
-- CHASSIS SUPERVISION FAN STATUS TABLE
alaChasEntPhysFanTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaChasEntPhysFanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains one row per physical fan entity."
::= { alcatelIND1ChassisMIBObjects 11 }
alaChasEntPhysFanEntry OBJECT-TYPE
SYNTAX AlaChasEntPhysFanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular fan in a chassis physical entity."
INDEX { entPhysicalIndex, alaChasEntPhysFanLocalIndex }
::= { alaChasEntPhysFanTable 1 }
AlaChasEntPhysFanEntry ::= SEQUENCE
{
alaChasEntPhysFanLocalIndex Integer32,
alaChasEntPhysFanStatus INTEGER,
alaChasEntPhysFanAirflow INTEGER,
alaChasEntPhysFanSpeed Unsigned32
}
alaChasEntPhysFanLocalIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index to a chassis fan entity"
::={ alaChasEntPhysFanEntry 1 }
alaChasEntPhysFanStatus OBJECT-TYPE
SYNTAX INTEGER
{
noStatus(0),
notRunning(1),
running(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Chassis fan operational status"
::={alaChasEntPhysFanEntry 2}
alaChasEntPhysFanAirflow OBJECT-TYPE
SYNTAX INTEGER
{
frontToRear(0),
rearToFront(1),
notApplicable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Chassis fan airflow direction"
::={alaChasEntPhysFanEntry 3}
alaChasEntPhysFanSpeed OBJECT-TYPE
SYNTAX Unsigned32
UNITS "rpm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Chassis fan speed."
::={alaChasEntPhysFanEntry 4}
-- CHASSIS SUPERVISION RFS COMMANDS
alcatelIND1ChassisSupervisionRfsCommands OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For Chassis Supervision RFS commands.
For rrm command the Slot, Command and SrcFileName are mandatory.
For rcp command the Slot, Command, SrcFileName and DestFileName
are mandatory. For rdf command the Slot and Command are mandatory"
::= { alcatelIND1ChassisMIBObjects 5 }
chasSupervisionRfsCommandsSlot OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "CMM Slot where RFS command should be executed."
::= { alcatelIND1ChassisSupervisionRfsCommands 1}
chasSupervisionRfsCommandsCommand OBJECT-TYPE
SYNTAX INTEGER {
notSignificant(0),
rrm(1),
rcp(2),
rls(3),
rdf(4),
rget(5),
rput(6),
reserved(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies which of the above Actions is to be
performed. The commands are as follows:
- rrm Remote file remove
- rcp Remote file copy (DEPRECATED please use rget or rput instead)
- rls Remote directory listing
- rdf Remote flash disk space free
- rget Remote file get
- rput Remote file put"
::= { alcatelIND1ChassisSupervisionRfsCommands 2 }
chasSupervisionRfsCommandsSrcFileName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The remote file for where the RFS action is executed.
This includes also the path so directory name and file name.
This object is used when command set to rrm or rget or rput."
::= { alcatelIND1ChassisSupervisionRfsCommands 3 }
chasSupervisionRfsCommandsDestFileName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The destination file for where the RFS action is executed.
This includes also the path so directory name and file name.
This object is used when command set to rget or rput."
::= { alcatelIND1ChassisSupervisionRfsCommands 4 }
chasSupervisionRfsCommandsRlsDirName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The remote directory name where remote file is located in.
This is used when command set to rls."
DEFVAL { "/flash" }
::= { alcatelIND1ChassisSupervisionRfsCommands 5 }
chasSupervisionRfsCommandsRlsFileName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The remote file name where remote file is located in.
This is used when command set to rls."
::= { alcatelIND1ChassisSupervisionRfsCommands 6 }
chasSupervisionRfsCommandsProcessingState OBJECT-TYPE
SYNTAX INTEGER {
inProgress(1),
ready(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "command executing state for the previous set operation."
::= { alcatelIND1ChassisSupervisionRfsCommands 7 }
chasSupervisionRfsCommandsStatusCode OBJECT-TYPE
SYNTAX INTEGER {
success(1),
slotIsPrimary(2),
slotNotExist(3),
directoryNotExist(4),
fileNotExist(5),
maximumFilesExceed(6),
noDiskSpace(7),
systemBusy(8),
systemError(9),
directoryNotAllowToRemove(10),
permissionDenied(11)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "command completetion status error code."
::= { alcatelIND1ChassisSupervisionRfsCommands 8 }
-- CHASSIS CONTROL RELOAD STATUS
chasControlReloadStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF ChasControlReloadEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table containing reload status of each network interface
slot or stack module"
::= { alcatelIND1ChassisMIBObjects 6 }
chasControlReloadEntry OBJECT-TYPE
SYNTAX ChasControlReloadEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of a network interface reload status"
INDEX { chasControlReloadIndex }
::={ chasControlReloadStatusTable 1 }
ChasControlReloadEntry ::= SEQUENCE {
chasControlReloadIndex Integer32,
chasControlReloadStatus INTEGER
}
chasControlReloadIndex OBJECT-TYPE
SYNTAX Integer32 (1..64)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The index (entPhsycialIndex) value of the network interface."
::= { chasControlReloadEntry 1 }
chasControlReloadStatus OBJECT-TYPE
SYNTAX INTEGER
{
reloadEnabled(1),
reloadDisabled(2),
noInterface(3),
unknown(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Returned value indicates if the network interface module is
enabled or disabled for reload."
DEFVAL { reloadDisabled }
::= { chasControlReloadEntry 2 }
-- CHASSIS GLOBAL CONTROL OBJECTS
chasGlobalControl OBJECT IDENTIFIER ::= { alcatelIND1ChassisMIBObjects 7 }
chasGlobalControlDelayedResetAll OBJECT-TYPE
SYNTAX Integer32 (-1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to schedule a delayed reset all action for
a standalone chassis or for the entire virtual chassis when running
is virtual chassis mode. To schedule a delayed reset on a specific
chassis when running is virtual chassis mode, use the
chasControlDelayedResetAll object for the desired chassis.
If set to -1 - cancel the timer, 0 - reset all immediately,
any other value will start counting down the time until reset."
DEFVAL { -1 }
::= { chasGlobalControl 1 }
chasGlobalControlLongCommand OBJECT-TYPE
SYNTAX INTEGER
{
none(1),
certifySynchro(2),
certifyNoSynchro(3),
flashSynchro(4),
restore(5),
reload(6),
rfs(7),
issu(8),
shutdown(9),
vcConvert(10),
macRelease(11)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to indicate whether a long-term action
is in progress, and if so, what the action is."
DEFVAL { none }
::= { chasGlobalControl 2 }
chasGlobalControlLongCommandStatus OBJECT-TYPE
SYNTAX INTEGER
{
none(1),
inProgress(2),
completeSuccess(3),
completeFailure(4),
confirmationRequired(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the final disposition of the
most recent long-term action. When running in virtual
chassis mode, the value confirmationRequired(5),
indicates that the command identified in
chasGlobalControlLongCommand may disrupt the virtual
chassis. The command is suspended and requires that
chasClobalControlConfirmOperation be set to true, after
reviewing the details and accepting the consequences
identified by chasGlobalControlConfirmMessage."
DEFVAL { none }
::= { chasGlobalControl 3 }
chasGlobalControlUpdateFirmware OBJECT-TYPE
SYNTAX INTEGER
{
none(1),
ubootCmm(2),
ubootNi(3),
ubootNiAll(4),
ubootCmmAll(5),
fpgaCmm(6),
fpgaNi(7),
fpgaNiDaughterBoard1(8),
fpgaNiDaughterBoard2(9),
fpgaCmmAll(10),
fpgaCmmPower(11),
fpgaNiPower(12)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object initiates a firmware update. The chasGlobalControlUpdateSlot
and chasGlobalControlUpdateFilename objects must be set prior to setting
this object to start the update. The progress of the update can be
monitored by reading chasGlobalControlUpdateStatus."
DEFVAL { none }
::= { chasGlobalControl 4 }
chasGlobalControlUpdateSlot OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the slot to be updated. The Slot value is
the entPhysicalIndex of the NI or CMM entry in the entPhyscialTable.
A value of 0 may be specified to update all NIs or CMMs. The value
of 0 is supported only for uboot updates."
::= { chasGlobalControl 5 }
chasGlobalControlUpdateFilename OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the filename containing the uboot
firmware image."
DEFVAL { "" }
::= { chasGlobalControl 6 }
chasGlobalControlUpdateStatus OBJECT-TYPE
SYNTAX INTEGER
{
noUpdate(1),
updateInProgress(2),
updateSuccess(3),
updateFailed(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reports the status of the firmware update.
The status for the the update identified by
chasGlobalControlUpdateFirmware and chasGlobalControlUpdateSlot
is returned. When ubootNiAll(4) ubootCmmAll(5) or fpgaCmmAll(10) update is
executed, the status of individual NIs or CMMs may be monitored
by changing the value of chasGlobalControlUpdateSlot to the
desired NI or CMM slot value prior to reading the status.
noUpdate(1) - No firmware update has been initiated.
updateInProgress(2) - Update is in progress.
updateSuccess(3) - The last firmware update was successful.
updateFailed(4) - The last firmware update failed."
DEFVAL { noUpdate }
::= { chasGlobalControl 7 }
chasGlobalControlConfirmOperation OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When operating in virtual chassis mode, this object can
be set to true(1) to confirm that the operation identified
by chasGlobalControlLongCommand can proceed. Set to false(2)
to cancel the operation. This should only be used when
chasGlobalControlLongCommandStatus is set to
confirmationRequired(5), and the value of
chasGlobalControlConfirmMessage has been reviewed."
::= { chasGlobalControl 8 }
chasGlobalControlConfirmMessage OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"When operating in virtual chassis mode, this object may be read
when chasGlobalControlLongCommandStatus is set to
confirmationRequired(5). This will happen when an operation such a
reload may disrupt the virtual chassis. This object contains information
about the consequences of executing the command identified by
chasGlobalControlLongCommand. The command has been suspended. To
accept the consequences and proceed with the operation, set
chasGlobalControlConfirmOperation to true."
::= { chasGlobalControl 9 }
alaChasBpsObjects OBJECT IDENTIFIER ::= { alcatelIND1ChassisMIBObjects 14 }
alaChasBpsFwTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaChasBpsFwEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains one row per shelf bps firrmware "
::= { alaChasBpsObjects 1 }
alaChasBpsFwEntry OBJECT-TYPE
SYNTAX AlaChasBpsFwEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a bps firrmare"
INDEX { alaChasBpsShelfId }
::= { alaChasBpsFwTable 1 }
AlaChasBpsFwEntry ::= SEQUENCE
{
alaChasBpsShelfId AlaChasBpsShelfId,
alaChasBpsUpdateFirmware INTEGER,
alaChasBpsCpldRev Integer32,
alaChasBpsMmcuRev Integer32,
alaChasBpsCmcuRev Integer32
}
alaChasBpsShelfId OBJECT-TYPE
SYNTAX AlaChasBpsShelfId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Bps shelf ID "
::= { alaChasBpsFwEntry 1 }
alaChasBpsUpdateFirmware OBJECT-TYPE
SYNTAX INTEGER
{
disabled(1),
enabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to start BPS firmware update."
DEFVAL { disabled }
::= { alaChasBpsFwEntry 2 }
alaChasBpsCpldRev OBJECT-TYPE
SYNTAX Integer32(0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the CPLD revision Number of the BPS"
::= { alaChasBpsFwEntry 3 }
alaChasBpsMmcuRev OBJECT-TYPE
SYNTAX Integer32(0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the MMCU revision Number of the BPS"
::= { alaChasBpsFwEntry 4 }
alaChasBpsCmcuRev OBJECT-TYPE
SYNTAX Integer32(0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the CMCU revision Number of the BPS"
::= { alaChasBpsFwEntry 5 }
--
-- Connector Priority Table
---
alaChasBpsConnectorPriorityTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaChasBpsConnectorPriorityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains BPS connector priority for each slot"
::= { alaChasBpsObjects 2 }
alaChasBpsConnectorPriorityEntry OBJECT-TYPE
SYNTAX AlaChasBpsConnectorPriorityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about bps connector priority for each slot"
INDEX { alaChasBpsChassisId }
::= {alaChasBpsConnectorPriorityTable 1 }
AlaChasBpsConnectorPriorityEntry ::= SEQUENCE
{
alaChasBpsChassisId Integer32,
alaChasBpsConnectorShelfId AlaChasBpsShelfId,
alaChasBpsConnectorPriority Integer32,
alaChasBpsConnectorNum Integer32,
alaChasBpsSerialNum SnmpAdminString
}
alaChasBpsChassisId OBJECT-TYPE
SYNTAX Integer32(1..8)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Numbers allocated for the stack NIs as follows:
- 1..8: valid and assigned slot numbers corresponding to values from the entPhysicalTable"
::= { alaChasBpsConnectorPriorityEntry 1 }
alaChasBpsConnectorShelfId OBJECT-TYPE
SYNTAX AlaChasBpsShelfId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Bps shelf ID "
::= { alaChasBpsConnectorPriorityEntry 2 }
alaChasBpsConnectorPriority OBJECT-TYPE
SYNTAX Integer32(0..8)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object specifies the bps connector priority."
DEFVAL { 0 }
::= { alaChasBpsConnectorPriorityEntry 3 }
alaChasBpsConnectorNum OBJECT-TYPE
SYNTAX Integer32(0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object specifies the bps connector num."
::= { alaChasBpsConnectorPriorityEntry 4 }
alaChasBpsSerialNum OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..14))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object specifies the bps serial num."
::= { alaChasBpsConnectorPriorityEntry 5 }
--
-- Bps Mode Table
--
alaChasBpsModeTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaChasBpsModeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains one row for bps config parameters."
::= { alaChasBpsObjects 3 }
alaChasBpsModeEntry OBJECT-TYPE
SYNTAX AlaChasBpsModeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Information about bps mode"
INDEX { alaChasBpsShelfId }
::= { alaChasBpsModeTable 1 }
AlaChasBpsModeEntry ::= SEQUENCE
{
alaChasBpsMode INTEGER
}
alaChasBpsMode OBJECT-TYPE
SYNTAX INTEGER
{
single(1),
full(2),
notApplicable(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is only applicable to BPS .Value is
used to specify current Mode of switch."
DEFVAL { single }
::= { alaChasBpsModeEntry 1 }
--
-- BPS Power supplies Table
--
alaChasBpsPowerSupplyTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaChasBpsPowerSupplyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains BPS power supplies details"
::= {alaChasBpsObjects 4}
alaChasBpsPowerSupplyEntry OBJECT-TYPE
SYNTAX AlaChasBpsPowerSupplyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular BPS power supply"
INDEX { alaChasBpsPowerSupplyShelfId, alaChasBpsPowerSupplyIndex }
::= { alaChasBpsPowerSupplyTable 1 }
AlaChasBpsPowerSupplyEntry ::= SEQUENCE
{
alaChasBpsPowerSupplyShelfId AlaChasBpsShelfId,
alaChasBpsPowerSupplyIndex Integer32,
alaChasBpsPowerSupplyName SnmpAdminString,
alaChasBpsPowerSupplyDescr SnmpAdminString,
alaChasBpsPowerSupplyModuleType SnmpAdminString,
alaChasBpsPowerSupplyPartNumber SnmpAdminString,
alaChasBpsPowerSupplyHardwareRev SnmpAdminString,
alaChasBpsPowerSupplySerialNum SnmpAdminString,
alaChasBpsPowerSupplyMfgDate SnmpAdminString,
alaChasBpsPowerSupplyOperStatus INTEGER,
alaChasBpsPowerSupplyPowerProv Integer32
}
alaChasBpsPowerSupplyShelfId OBJECT-TYPE
SYNTAX AlaChasBpsShelfId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"BPS shelf ID"
::= { alaChasBpsPowerSupplyEntry 1 }
alaChasBpsPowerSupplyIndex OBJECT-TYPE
SYNTAX Integer32(1..6)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This value hold BPS power power supply Index"
::= { alaChasBpsPowerSupplyEntry 2 }
alaChasBpsPowerSupplyName OBJECT-TYPE
SYNTAX SnmpAdminString(SIZE(0..63))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object hold name of BPS power supply"
::= { alaChasBpsPowerSupplyEntry 3 }
alaChasBpsPowerSupplyDescr OBJECT-TYPE
SYNTAX SnmpAdminString(SIZE(0..63))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object hold description of BPS power supply"
::= { alaChasBpsPowerSupplyEntry 4 }
alaChasBpsPowerSupplyModuleType OBJECT-TYPE
SYNTAX SnmpAdminString(SIZE(0..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is unique module Type or ID from BPS entities eeprom"
::= { alaChasBpsPowerSupplyEntry 5 }
alaChasBpsPowerSupplyPartNumber OBJECT-TYPE
SYNTAX SnmpAdminString(SIZE(0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the BPS power supply Part Number "
::= { alaChasBpsPowerSupplyEntry 6 }
alaChasBpsPowerSupplyHardwareRev OBJECT-TYPE
SYNTAX SnmpAdminString(SIZE(0..8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vendor-specific hardware revision string for the
BPS power supplies
Note that if revision information is stored internally in a
non-printable (e.g., binary) format, then the agent must
convert such information to a printable format, in an
implementation-specific manner.
If no specific hardware revision string is associated with
the physical component, or this information is unknown to
the agent, then this object will contain a zero-length
string."
::= { alaChasBpsPowerSupplyEntry 7 }
alaChasBpsPowerSupplySerialNum OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vendor-specific serial number string for the
BPS power supplies"
::= { alaChasBpsPowerSupplyEntry 8 }
alaChasBpsPowerSupplyMfgDate OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..11))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the manufacturing date of the BPS power supplies .
Its format is mmm dd yyyy : NOV 27 2012."
::= { alaChasBpsPowerSupplyEntry 9 }
alaChasBpsPowerSupplyOperStatus OBJECT-TYPE
SYNTAX INTEGER
{
up(1),
down(2),
unknown(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Oper status of BPS power supply"
::= { alaChasBpsPowerSupplyEntry 10 }
alaChasBpsPowerSupplyPowerProv OBJECT-TYPE
SYNTAX Integer32(0..2000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" It corresponds to max power of BPS power supply.
This value is in Watts."
::= { alaChasBpsPowerSupplyEntry 11 }
--
--BPS Total Power allocation Table
--
alaChasBpsTotalPowerAllocTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaChasBpsTotalPowerAllocEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains one row for parameters which reflect total allocation by BPS ."
::= { alaChasBpsObjects 5 }
alaChasBpsTotalPowerAllocEntry OBJECT-TYPE
SYNTAX AlaChasBpsTotalPowerAllocEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Information about various bps config parameters"
INDEX { alaChasBpsShelfId }
::= { alaChasBpsTotalPowerAllocTable 1 }
AlaChasBpsTotalPowerAllocEntry ::= SEQUENCE
{
alaChasBpsSysTotalAvailablePower Integer32,
alaChasBpsSysTotalAllocation Integer32,
alaChasBpsPoeTotalAvailablePower Integer32,
alaChasBpsPoeTotalAllocation Integer32
}
alaChasBpsSysTotalAvailablePower OBJECT-TYPE
SYNTAX Integer32(0..900)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value is only applicable to the BPS Module. It
corresponds to system total power available on BPS
This value is in Watts."
::= { alaChasBpsTotalPowerAllocEntry 1 }
alaChasBpsSysTotalAllocation OBJECT-TYPE
SYNTAX Integer32(0..900)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value is only applicable to the BPS Modules. It
corresponds to total system power allocated by BPS
This value is in Watts."
::= { alaChasBpsTotalPowerAllocEntry 2 }
alaChasBpsPoeTotalAvailablePower OBJECT-TYPE
SYNTAX Integer32(0..6000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value is only applicable to the BPS Modules. It
corresponds to system total power available on BPS
This value is in Watts."
::= { alaChasBpsTotalPowerAllocEntry 3 }
alaChasBpsPoeTotalAllocation OBJECT-TYPE
SYNTAX Integer32(0..6000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value is only applicable to the Bps Modules. It
corresponds to total POE power allocated by BPS
This value is in Watts."
::= { alaChasBpsTotalPowerAllocEntry 4 }
--
--Chassis traps mib : chassisTraps
--
--Chassis traps Object definition
chassisTrapsObj OBJECT IDENTIFIER ::= { alcatelIND1ChassisMIBObjects 13 }
--
--textual conventions
--
ChassisTrapsStrLevel ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"enumerated value which provide the
urgency level of the STR."
SYNTAX INTEGER {
strNotFatal (1), --recorverable
strApplicationFatal (2), --not recorverable for the application
strFatal (3) --not recorverable for the board
}
ChassisTrapsStrAppID ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Application Identification number"
SYNTAX Integer32 (0..255)
ChassisTrapsStrSnapID ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Subapplication Identification number.
we can have multiple snapIDs per
Subapplication (task) but only one is
to be used to send STRs."
SYNTAX Integer32 (0..255)
ChassisTrapsStrfileLineNb ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Line number in the source file where the
fault was detected. This is given by the C
ANSI macro __LINE__."
SYNTAX Integer32 (1..65535)
ChassisTrapsStrErrorNb ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Fault identifier. The error number
identifies the kind the detected fault and
allows a mapping of the data contained in
chassisTrapsdataInfo."
SYNTAX Integer32 (0..65535)
ChassisTrapsStrdataInfo ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Additional data provided to help to find out
the origine of the fault. The contain and the
significant portion are varying in accordance
with chassisTrapsStrErrorNb. The lenght of this
field is expressed in bytes."
SYNTAX OCTET STRING (SIZE (0..63))
ChassisTrapsObjectType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An enumerated value which provides the object type
involved in the alert trap."
SYNTAX INTEGER {
chassis (1),
ni (2),
powerSuply (3),
fan (4),
cmm (5),
fabric (6),
gbic (7)
}
ChassisTrapsObjectNumber ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A number defining the order of the object in the
set. EX: The number of the considered fan or power
supply. This intend to clarify as much as possible
the location of the failure or alert. An instance
of the appearance of the trap could be:
failure on a module. Power supply 3. "
SYNTAX Integer32 (0..255)
ChassisTrapsAlertNumber ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"this number identify the alert among all the
possible chassis alert causes."
SYNTAX INTEGER {
runningWorking (1), -- The working version is used
runningCertified (2), -- The certified version is used
certifyStarted (3), -- CERTIFY process started
certifyFlashSyncStarted (4), -- CERTIFY w/FLASH SYNCHRO process started
certifyCompleted (5), -- CERTIFY process completed successfully
certifyFailed (6), -- CERTIFY process failed
synchroStarted (7), -- Flash Synchronization process started
synchroCompleted (8), -- Flash Synchronization completed successfully
synchroFailed (9), -- Flash Synchronization failed
restoreStarted (10), -- RESTORE process started
restoreCompleted (11), -- RESTORE process completed successfully
restoreFailed (12), -- RESTORE process failed
takeoverStarted (13), -- CMM take-over being processed
takeoverDeferred (14), -- CMM take-over deferred
takeoverCompleted (15), -- CMM take-over completed
macAllocFailed (16), -- CMS MAC allocation failed
macRangeFailed (17), -- CMS MAC range addition failed
fanFailed (18), -- One or more of the fans is inoperable
fanOk (19), -- Fan is operable
fansOk (20), -- All fans are operable
tempOverThreshold (21), -- CMM temperature over the threshold
tempUnderThreshold (22), -- CMM temperature under the threshold
tempOverDangerThreshold (23), -- CMM temperature over danger threshold
powerMissing (24), -- Not enough power available
psNotOperational (25), -- Power Supply is not operational
psOperational (26), -- Power supply is operational
psAllOperational (27), -- All power supplies are operational
redundancyNotSupported (28), -- Hello protocol disabled, Redundancy not supported
redundancyDisabledCertifyNeeded (29), -- Hello protocol disabled, Certify needed
cmmStartingAsPrimary (30), -- CMM started as primary
cmmStartingAsSecondary (31), -- CMM started as secondary
cmmStartupCompleted (32), -- end of CMM start up
cmmAPlugged (33), -- cmm a plugged
cmmBPlugged (34), -- cmm b plugged
cmmAUnPlugged (35), -- cmm a unplugged
cmmBUnPlugged (36), -- cmm b unplugged
lowNvramBattery (37), -- NV RAM battery is low
notEnoughFabricsOperational (38), -- Not enough Fabric boards operational
simplexNoSynchro (39), -- Only simplex CMM no flash synchro done
secAutoActivate (40), -- secondary CMM autoactivating
secAutoCertifyStarted (41), -- secondary CMM autocertifying
secAutoCertifyCompleted (42), -- secondary CMM autocertify end
secInactiveReset (43), -- cmm b unplugged
activateScheduled (44), -- ACTIVATE process scheduled
activateStarted (45), -- secondary CMM reset because of inactivity
getAfileCompleted (46), -- Get A file process completed
getAfileFailed (47), -- Failed to get a file from other CMM/Stack
sysUpdateStart (48), -- sysUpdate starts
sysUpdateInProgress (49), -- sysUpdate in progress
sysUpdateError (50), -- sysUpdate error
sysUpdateEnd (51), -- sysUpdate ends
reloadInProgress (52), -- the system is already in reload workign process
c20UpgradeOk (53), -- the c20 license upgrade ok
c20UpgradeFailed (54), -- the c20 license upgrade failed
c20RestoreOk (55), -- the c20 license restore ok
c20RestoreFailed (56), -- the c20 license restore failed
c20NiFailed (57), -- the c20 ni board reports failure
airflowReverse (58), -- ps and fan have opposit air flow direction
tempSWHigh (59), -- the cmm/ni temperature is over SW high level
tempHWHigh (60), -- the cmm/ni temperature is over HW high level
tempDanger (61), -- the cmm/ni temperature is over HW danger set level
imageFileChecksumChanged (62) -- the image file MD5 checksum has changed
}
--
--object i.e. trap description
--
chassisTrapsStr NOTIFICATION-TYPE
OBJECTS {
chassisTrapsStrLevel ,
chassisTrapsStrAppID ,
chassisTrapsStrSnapID ,
chassisTrapsStrfileName ,
chassisTrapsStrfileLineNb ,
chassisTrapsStrErrorNb ,
chassisTrapsStrcomments ,
chassisTrapsStrdataInfo
}
STATUS current
DESCRIPTION
"A Software Trouble report is sent by whatever application
encountering a problem during its execution and would
want to aware the user of for maintenance purpose. "
::= { alcatelIND1ChassisMIBNotifications 1 }
chassisTrapsAlert NOTIFICATION-TYPE
OBJECTS {
physicalIndex ,
chassisTrapsObjectType ,
chassisTrapsObjectNumber ,
chassisTrapsAlertNumber ,
chassisTrapsAlertDescr
}
STATUS current
DESCRIPTION
"generic trap notifying something changed in the chassis
whatever it's a failure or not "
::= { alcatelIND1ChassisMIBNotifications 2 }
chassisTrapsStateChange NOTIFICATION-TYPE
OBJECTS {
physicalIndex ,
chassisTrapsObjectType ,
chassisTrapsObjectNumber ,
chasEntPhysOperStatus
}
STATUS current
DESCRIPTION
"A status change was detected"
::= { alcatelIND1ChassisMIBNotifications 3 }
-- BPS related traps
--
-- Ni specific
chasTrapsBPSLessAllocSysPwr NOTIFICATION-TYPE
OBJECTS
{
physicalIndex,
chasTrapsNiRqstdBpsSysPower,
chasTrapsNiGrantdBpsSysPower
}
STATUS current
DESCRIPTION
"Insufficient system power given by BPS"
::= { alcatelIND1ChassisMIBNotifications 4 }
-- Complete shelf specific
chasTrapsBPSStateChange NOTIFICATION-TYPE
OBJECTS
{
chasTrapBPSShelfId,
chasTrapsBPSPowerSupply,
chasTrapsBPSEventAlert
}
STATUS current
DESCRIPTION
"BPS power supplies insertion/removal trap"
::= { alcatelIND1ChassisMIBNotifications 5 }
-- specific to connector
chasTrapsNiBPSFETStateChange NOTIFICATION-TYPE
OBJECTS
{
physicalIndex,
chasTrapsBPSSystemFETChange,
chasTrapsBPSPoeFETChange
}
STATUS current
DESCRIPTION
"BPS power supplies FET state change trap"
::= { alcatelIND1ChassisMIBNotifications 6 }
chasTrapsBPSFwUpgradeAlert NOTIFICATION-TYPE
OBJECTS
{
chasTrapBPSShelfId,
chasTrapsBPSFwType,
chasTrapsBPSFwVersion
}
STATUS current
DESCRIPTION
"BPS FW upgrade requirment alert trap"
::= { alcatelIND1ChassisMIBNotifications 7 }
-- BPS related traps end
-- objects used in the traps.
--
chassisTrapsStrLevel OBJECT-TYPE
SYNTAX ChassisTrapsStrLevel
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An enumerated value which provides the
urgency level of the STR."
::= {chassisTrapsObj 1}
chassisTrapsStrAppID OBJECT-TYPE
SYNTAX ChassisTrapsStrAppID
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Application Identification number"
::= {chassisTrapsObj 2}
chassisTrapsStrSnapID OBJECT-TYPE
SYNTAX ChassisTrapsStrSnapID
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Subapplication Identification number.
we can have multiple snapIDs per
Subapplication (task) but only one is
to be used to send STRs."
::= {chassisTrapsObj 3}
chassisTrapsStrfileName OBJECT-TYPE
SYNTAX SnmpAdminString(SIZE(0..19))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Name of the source file where the fault
was detected. This is given by the C ANSI
macro __FILE__. The path shouldn't appear."
::= {chassisTrapsObj 4}
chassisTrapsStrfileLineNb OBJECT-TYPE
SYNTAX ChassisTrapsStrfileLineNb
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Line number in the source file where the
fault was detected. This is given by the C
ANSI macro __LINE__."
::= {chassisTrapsObj 5}
chassisTrapsStrErrorNb OBJECT-TYPE
SYNTAX ChassisTrapsStrErrorNb
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Fault identificator. The error number
identify the kind the detected fault and
allow a mapping of the data contained in
chassisTrapsdataInfo."
::= {chassisTrapsObj 6}
chassisTrapsStrcomments OBJECT-TYPE
SYNTAX SnmpAdminString(SIZE(0..63))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"comment text explaning the fault."
::= {chassisTrapsObj 7}
chassisTrapsStrdataInfo OBJECT-TYPE
SYNTAX ChassisTrapsStrdataInfo
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Additional data provided to help to find out
the origine of the fault. The contain and the
significant portion are varying in accordance
with chassisTrapsStrErrorNb. The lenght of this
field is expressed in bytes."
::= {chassisTrapsObj 8}
chassisTrapsObjectType OBJECT-TYPE
SYNTAX ChassisTrapsObjectType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"enumerated value which provide the object type
involved in the alert trap."
::= {chassisTrapsObj 9}
chassisTrapsObjectNumber OBJECT-TYPE
SYNTAX ChassisTrapsObjectNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"number defining the order of the object in the
set. EX: number of the considered fan or power
supply. This intend to clarify as much as possible
the location of the failure or alert. A instance
of the appearance of the trap could be:
failure on a module. Power supply 3. "
::= {chassisTrapsObj 10}
chassisTrapsAlertNumber OBJECT-TYPE
SYNTAX ChassisTrapsAlertNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"this number identify the alert among all the
possible chassis alert causes."
::= {chassisTrapsObj 11}
chassisTrapsAlertDescr OBJECT-TYPE
SYNTAX SnmpAdminString(SIZE(0..127))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"description of the alert matching chassisTrapsAlertNumber"
::= {chassisTrapsObj 12}
physicalIndex OBJECT-TYPE
SYNTAX PhysicalIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Physical index of the involved object."
::= { chassisTrapsObj 13 }
--BPS Traps objects
chasTrapsNiRqstdBpsSysPower OBJECT-TYPE
SYNTAX Integer32(0..126)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Requested system power from os-bps"
::= { chassisTrapsObj 14 }
chasTrapsNiGrantdBpsSysPower OBJECT-TYPE
SYNTAX Integer32(0..126)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Granted system power from os-bps"
::= { chassisTrapsObj 15 }
chasTrapBPSShelfId OBJECT-TYPE
SYNTAX Integer32(1..3)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Granted system power from os-bps"
::= { chassisTrapsObj 16 }
chasTrapsBPSPowerSupply OBJECT-TYPE
SYNTAX ChasTrapsBPSPowerSupply
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"value which provide bps power supply involved in the
State change trap"
::= { chassisTrapsObj 17 }
chasTrapsBPSEventAlert OBJECT-TYPE
SYNTAX ChasTrapsBPSEventAlert
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"enumerated value identifying alert"
::= { chassisTrapsObj 18 }
chasTrapsBPSSystemFETChange OBJECT-TYPE
SYNTAX ChasTrapsBPSFetState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"enumerated value which indicate Fet state"
::= { chassisTrapsObj 19 }
chasTrapsBPSPoeFETChange OBJECT-TYPE
SYNTAX ChasTrapsBPSFetState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"enumerated value which indicate Fet state"
::= { chassisTrapsObj 20 }
chasTrapsBPSFwVersion OBJECT-TYPE
SYNTAX Integer32(1..99)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"enumerated value which indicate the FW that require upgrade"
::= { chassisTrapsObj 21 }
chasTrapsBPSFwType OBJECT-TYPE
SYNTAX ChasTrapsBPSFwType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"value which indicate Fet state"
::= { chassisTrapsObj 22 }
--BPS Traps objects End
-- END Trap Objects
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-- COMPLIANCE
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
alcatelIND1ChassisMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Compliance statement for Chassis Supervision."
MODULE
MANDATORY-GROUPS
{
chasControlModuleGroup ,
chasControlRedundantGroup ,
chasChassisGroup ,
chasControlReloadStatusGroup ,
chasGlobalControlGroup ,
chassisNotificationGroup ,
alaChasEntPhysFanGroup ,
alaChasNotificationObjectGroup ,
chassisSupervisionRfsCommandsGroup ,
chasSupervisionCmmCertifiedEntryGroup,
chasSupervisionFlashMemEntryGroup ,
chasSupervisionRfsDfEntryGroup ,
chasSupervisionRfsLsEntryGroup,
alaChasBpsFwGroup,
alaChasBpsConnectorPriorityGroup,
alaChasBpsModeGroup,
alaChasBpsPowerSupplyGroup,
alaChasBpsTotalPowerAllocGroup
}
::= { alcatelIND1ChassisMIBCompliances 1 }
alcatelIND1ChassisPhysMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Compliance statement for Chassis Supervision Physical."
MODULE
MANDATORY-GROUPS
{
chasEntPhysicalGroup ,
chassisPhysNotificationGroup
}
::= { alcatelIND1ChassisPhysMIBCompliances 1 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-- UNITS OF CONFORMANCE
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
chasControlModuleGroup OBJECT-GROUP
OBJECTS
{
chasControlActivateTimeout,
chasControlVersionMngt,
chasControlDelayedActivateTimer,
chasControlCertifyStatus,
chasControlSynchronizationStatus,
chasControlAcrossCmmWorkingSynchroStatus,
chasControlAcrossCmmCertifiedSynchroStatus,
chasControlNextRunningVersion,
chasControlCurrentRunningVersion,
chasControlWorkingVersion,
chasControlRedundancyTime,
chasControlEmpIpAddress,
chasControlEmpIpMask,
chasControlChassisId
}
STATUS current
DESCRIPTION
"Chassis Supervision Control Modules Group."
::= { alcatelIND1ChassisMIBGroups 1 }
chasControlRedundantGroup OBJECT-GROUP
OBJECTS
{
chasControlNumberOfTakeover ,
chasControlDelayedRebootTimer ,
chasControlDelayedResetAll
}
STATUS current
DESCRIPTION
"Chassis Supervision Redundant Control Modules Group."
::= { alcatelIND1ChassisMIBGroups 2 }
chasChassisGroup OBJECT-GROUP
OBJECTS
{
chasFreeSlots ,
chasPowerLeft ,
chasNumberOfResets ,
chasTempRange ,
chasTempThreshold ,
chasDangerTempThreshold ,
chasPrimaryPhysicalIndex,
chasCPMAHardwareBoardTemp,
chasCFMAHardwareBoardTemp,
chasCPMBHardwareBoardTemp,
chasCFMBHardwareBoardTemp,
chasCFMCHardwareBoardTemp,
chasCFMDHardwareBoardTemp,
chasFTAHardwareBoardTemp,
chasFTBHardwareBoardTemp,
chasNI1HardwareBoardTemp,
chasNI2HardwareBoardTemp,
chasNI3HardwareBoardTemp,
chasNI4HardwareBoardTemp,
chasNI5HardwareBoardTemp,
chasNI6HardwareBoardTemp,
chasNI7HardwareBoardTemp,
chasNI8HardwareBoardTemp,
chasPowerSupplyRedundancy,
chasPowerSupplyRedundancyReserve
}
STATUS current
DESCRIPTION
"Chassis Supervision Chassis Group."
::= { alcatelIND1ChassisMIBGroups 3 }
chasControlReloadStatusGroup OBJECT-GROUP
OBJECTS
{
chasControlReloadStatus
}
STATUS current
DESCRIPTION
"Chassis Supervision NI Reload Status Control Modules Group."
::= { alcatelIND1ChassisMIBGroups 4 }
chasGlobalControlGroup OBJECT-GROUP
OBJECTS
{
chasGlobalControlDelayedResetAll,
chasGlobalControlLongCommand,
chasGlobalControlLongCommandStatus,
chasGlobalControlUpdateFirmware,
chasGlobalControlUpdateSlot,
chasGlobalControlUpdateFilename,
chasGlobalControlUpdateStatus,
chasGlobalControlConfirmOperation,
chasGlobalControlConfirmMessage
}
STATUS current
DESCRIPTION
"Chassis Supervision Global Control Modules Group."
::= { alcatelIND1ChassisMIBGroups 5 }
chassisNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS
{
chassisTrapsStr ,
chassisTrapsAlert,
chasTrapsBPSLessAllocSysPwr,
chasTrapsBPSStateChange,
chasTrapsNiBPSFETStateChange,
chasTrapsBPSFwUpgradeAlert
}
STATUS current
DESCRIPTION
"Chassis Supervision Notification Group."
::= { alcatelIND1ChassisMIBGroups 6 }
alaChasEntPhysFanGroup OBJECT-GROUP
OBJECTS
{
alaChasEntPhysFanStatus,
alaChasEntPhysFanAirflow,
alaChasEntPhysFanSpeed
}
STATUS current
DESCRIPTION
"Chassis Supervision Physical Fan Group."
::= { alcatelIND1ChassisMIBGroups 7 }
alaChasNotificationObjectGroup OBJECT-GROUP
OBJECTS
{
chassisTrapsStrLevel,
chassisTrapsStrAppID,
chassisTrapsStrSnapID,
chassisTrapsStrfileName,
chassisTrapsStrfileLineNb,
chassisTrapsStrErrorNb,
chassisTrapsStrcomments,
chassisTrapsStrdataInfo,
chassisTrapsObjectType,
chassisTrapsObjectNumber,
chassisTrapsAlertNumber,
chassisTrapsAlertDescr,
physicalIndex,
chasTrapsNiRqstdBpsSysPower,
chasTrapsNiGrantdBpsSysPower,
chasTrapBPSShelfId,
chasTrapsBPSPowerSupply,
chasTrapsBPSEventAlert,
chasTrapsBPSSystemFETChange,
chasTrapsBPSPoeFETChange,
chasTrapsBPSFwVersion,
chasTrapsBPSFwType
}
STATUS current
DESCRIPTION
"Chassis Supervision Notification Object Group."
::= { alcatelIND1ChassisMIBGroups 9 }
chassisSupervisionRfsCommandsGroup OBJECT-GROUP
OBJECTS
{
chasSupervisionRfsCommandsSlot,
chasSupervisionRfsCommandsCommand,
chasSupervisionRfsCommandsSrcFileName,
chasSupervisionRfsCommandsDestFileName,
chasSupervisionRfsCommandsRlsDirName,
chasSupervisionRfsCommandsRlsFileName,
chasSupervisionRfsCommandsProcessingState,
chasSupervisionRfsCommandsStatusCode
}
STATUS current
DESCRIPTION
"Chassis Supervision RFS Command Group."
::= { alcatelIND1ChassisMIBGroups 10 }
chasSupervisionCmmCertifiedEntryGroup OBJECT-GROUP
OBJECTS
{
chasSupervisionCmmCertifiedStatus
}
STATUS current
DESCRIPTION
"Information about Cmm Certified Group."
::= { alcatelIND1ChassisMIBGroups 11 }
chasSupervisionFlashMemEntryGroup OBJECT-GROUP
OBJECTS
{
chasSupervisionFlashSize,
chasSupervisionFlashFree,
chasSupervisionFlashUsed
}
STATUS current
DESCRIPTION
"The systems flash memory information group."
::= { alcatelIND1ChassisMIBGroups 12 }
chasSupervisionRfsDfEntryGroup OBJECT-GROUP
OBJECTS
{
chasSupervisionRfsDfFlashFree,
chasSupervisionRfsDfFlashSize,
chasSupervisionRfsDfUsbFree,
chasSupervisionRfsDfUsbSize
}
STATUS current
DESCRIPTION
"Information about RfsDf file system group."
::= { alcatelIND1ChassisMIBGroups 13 }
chasSupervisionRfsLsEntryGroup OBJECT-GROUP
OBJECTS
{
chasSupervisionRfsLsFileIndex,
chasSupervisionRfsLsSlot,
chasSupervisionRfsLsDirName,
chasSupervisionRfsLsFileName,
chasSupervisionRfsLsFileType,
chasSupervisionRfsLsFileSize,
chasSupervisionRfsLsFileAttr,
chasSupervisionRfsLsFileDateTime
}
STATUS current
DESCRIPTION
"Information about a RfsLs file group."
::= { alcatelIND1ChassisMIBGroups 14 }
alaChasBpsFwGroup OBJECT-GROUP
OBJECTS
{
alaChasBpsUpdateFirmware,
alaChasBpsCpldRev,
alaChasBpsMmcuRev,
alaChasBpsCmcuRev
}
STATUS current
DESCRIPTION
"Information about BPS FW group."
::= { alcatelIND1ChassisMIBGroups 15 }
alaChasBpsConnectorPriorityGroup OBJECT-GROUP
OBJECTS
{
alaChasBpsConnectorShelfId,
alaChasBpsConnectorPriority,
alaChasBpsConnectorNum,
alaChasBpsSerialNum
}
STATUS current
DESCRIPTION
"Information about BPS Connector Priority group."
::= { alcatelIND1ChassisMIBGroups 16 }
alaChasBpsModeGroup OBJECT-GROUP
OBJECTS
{
alaChasBpsMode
}
STATUS current
DESCRIPTION
"Information about BPS Mode group."
::= { alcatelIND1ChassisMIBGroups 17 }
alaChasBpsPowerSupplyGroup OBJECT-GROUP
OBJECTS
{
alaChasBpsPowerSupplyName,
alaChasBpsPowerSupplyDescr,
alaChasBpsPowerSupplyModuleType,
alaChasBpsPowerSupplyPartNumber,
alaChasBpsPowerSupplyHardwareRev,
alaChasBpsPowerSupplySerialNum,
alaChasBpsPowerSupplyMfgDate,
alaChasBpsPowerSupplyOperStatus,
alaChasBpsPowerSupplyPowerProv
}
STATUS current
DESCRIPTION
" BPS Power Supply group."
::= { alcatelIND1ChassisMIBGroups 18 }
alaChasBpsTotalPowerAllocGroup OBJECT-GROUP
OBJECTS
{
alaChasBpsSysTotalAvailablePower,
alaChasBpsSysTotalAllocation,
alaChasBpsPoeTotalAvailablePower,
alaChasBpsPoeTotalAllocation
}
STATUS current
DESCRIPTION
" BPS Total Power Alloc group."
::= { alcatelIND1ChassisMIBGroups 19 }
chasEntPhysicalGroup OBJECT-GROUP
OBJECTS
{
chasEntPhysAdminStatus ,
chasEntPhysOperStatus ,
chasEntPhysPower ,
chasEntPhysModuleType ,
chasEntPhysPartNumber ,
chasEntPhysLedStatusOk1 ,
chasEntPhysLedStatusOk2 ,
chasEntPhysLedStatusPrimaryCMM ,
chasEntPhysLedStatusSecondaryCMM ,
chasEntPhysLedStatusTemperature ,
chasEntPhysLedStatusFan ,
chasEntPhysLedStatusBackupPS ,
chasEntPhysLedStatusInternalPS ,
chasEntPhysLedStatusControl ,
chasEntPhysLedStatusFabric ,
chasEntPhysLedStatusPS ,
chasEntPhysAsic1Rev ,
chasEntPhysAsic2Rev ,
chasEntPhysAsic3Rev ,
chasEntPhysAsic4Rev ,
chasEntPhysAsic5Rev ,
chasEntPhysAsic6Rev ,
chasEntPhysCpldRev ,
chasEntPhysDaughterFpga1Rev ,
chasEntPhysDaughterFpga2Rev ,
chasEntPhysNiNum ,
chasEntPhysGbicNum ,
chasEntPhysWaveLen ,
chasEntPhysUbootRev ,
chasEntPhysUbootMinibootRev ,
chasEntPhysMacAddress ,
chasEntPhysCpuModel ,
chasEntPhysAirflow ,
chasEntPhysPowerUsed ,
chasEntPhysPowerType
}
STATUS current
DESCRIPTION
"Chassis (inclosure) Entity Physical Group."
::= { alcatelIND1ChassisPhysMIBGroups 1 }
chassisPhysNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS
{
chassisTrapsStr ,
chassisTrapsAlert ,
chassisTrapsStateChange
}
STATUS current
DESCRIPTION
"Chassis Supervision Physical Notification Group."
::= { alcatelIND1ChassisPhysMIBGroups 2 }
chassisTemperatureGroup OBJECT-GROUP
OBJECTS
{
chasEntTempCurrent,
chasEntTempDangerThreshold,
chasEntTempStatus,
chasEntTempThreshold
}
STATUS current
DESCRIPTION
"Chassis Supervision Temprature Group."
::= { alcatelIND1ChassisPhysMIBGroups 3 }
END
Reference in New Issue View Git Blame Copy Permalink