1111 lines
41 KiB
Plaintext
1111 lines
41 KiB
Plaintext
|
|
ALCATEL-IND1-E-SERVICE-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY,
|
|
OBJECT-IDENTITY,
|
|
OBJECT-TYPE,
|
|
Integer32 FROM SNMPv2-SMI
|
|
OBJECT-GROUP,
|
|
MODULE-COMPLIANCE FROM SNMPv2-CONF
|
|
softentIND1eService FROM ALCATEL-IND1-BASE
|
|
RowStatus,
|
|
TEXTUAL-CONVENTION FROM SNMPv2-TC
|
|
SnmpAdminString FROM SNMP-FRAMEWORK-MIB
|
|
InterfaceIndex FROM IF-MIB
|
|
;
|
|
|
|
alcatelIND1EServiceMIB MODULE-IDENTITY
|
|
LAST-UPDATED "200705230000Z"
|
|
ORGANIZATION "Alcatel-Lucent"
|
|
CONTACT-INFO
|
|
"Please consult with Customer Service to ensure the most appropriate
|
|
version of this document is used with the products in question:
|
|
|
|
Alcatel-Lucent, Enterprise Solutions Division
|
|
(Formerly Alcatel Internetworking, Incorporated)
|
|
26801 West Agoura Road
|
|
Agoura Hills, CA 91301-5122
|
|
United States Of America
|
|
|
|
Telephone: North America +1 800 995 2696
|
|
Latin America +1 877 919 9526
|
|
Europe +31 23 556 0100
|
|
Asia +65 394 7933
|
|
All Other +1 818 878 4507
|
|
|
|
Electronic Mail: support@ind.alcatel.com
|
|
World Wide Web: http://alcatel-lucent.com/wps/portal/enterprise
|
|
File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs"
|
|
DESCRIPTION
|
|
"The parameters for configuration of the E-Service feature.
|
|
|
|
The right to make changes in specification and other information
|
|
contained in this document without prior notice is reserved.
|
|
|
|
No liability shall be assumed for any incidental, indirect, special, or
|
|
consequential damages whatsoever arising from or related to this
|
|
document or the information contained herein.
|
|
|
|
Vendors, end-users, and other interested parties are granted
|
|
non-exclusive license to use this specification in connection with
|
|
management of the products for which it is intended to be used.
|
|
|
|
Copyright (C) 1995-2006 Alcatel-Lucent
|
|
ALL RIGHTS RESERVED WORLDWIDE"
|
|
::= { softentIND1eService 1}
|
|
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
|
|
|
|
-- Textual Conventions
|
|
|
|
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
|
|
|
|
AlaEServiceUNIProfileProtocolTreatment ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The behavior of the bridge in regards to the given protocols packets received on
|
|
the UNI. Tunnel (1) enables the packets to be tunneled across the provider
|
|
network. Discard (2) causes the packets to be discarded and not enter
|
|
the provider network. Peer (3) means that on this port the bridge is to
|
|
participate in the protocol."
|
|
SYNTAX INTEGER
|
|
{
|
|
tunnel (1),
|
|
drop (2),
|
|
peer (3)
|
|
}
|
|
|
|
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
|
|
|
|
alcatelIND1eServiceMIBObjects OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Branch For E-Service Managed Objects."
|
|
::= { alcatelIND1EServiceMIB 1 }
|
|
|
|
alcatelIND1EServiceMIBConformance OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Branch For E-Service Conformance Information."
|
|
::= { alcatelIND1EServiceMIB 2 }
|
|
|
|
alcatelIND1EServiceMIBGroups OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Branch For E-Service Units Of Conformance."
|
|
::= { alcatelIND1EServiceMIBConformance 1 }
|
|
|
|
alcatelIND1EServiceMIBCompliances OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Branch For E-Service Compliance Statements."
|
|
::= { alcatelIND1EServiceMIBConformance 2 }
|
|
|
|
|
|
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
|
|
|
|
-- The E-Service Group
|
|
|
|
alaEService OBJECT IDENTIFIER ::= { alcatelIND1eServiceMIBObjects 1 }
|
|
|
|
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
|
|
alaEServiceInfo OBJECT IDENTIFIER ::= { alaEService 1 }
|
|
|
|
|
|
alaEServiceMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
legacyMode (1),
|
|
eServiceMode (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current mode configured for Vlan Stacking and Layer 2 tunnel configuration.
|
|
legacyMode (1) indicates that the commands from AlcatelIND1VLANStacking.mib are
|
|
to be used. eServiceMode (2) indicates the commands from this MIB are to be used."
|
|
DEFVAL { legacyMode }
|
|
::= { alaEServiceInfo 1 }
|
|
|
|
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
|
|
|
|
-- The E-Service SAP Profile Table
|
|
|
|
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
|
|
|
|
alaEServiceSapProfileTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AlaEServiceSapProfileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains service profiles containing performance and control attributes.
|
|
An entry in this table is created when a new service profile is defined."
|
|
::= { alaEService 2 }
|
|
|
|
alaEServiceSapProfileEntry OBJECT-TYPE
|
|
SYNTAX AlaEServiceSapProfileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A E-Service Service Profile entry."
|
|
INDEX { IMPLIED alaEServiceSapProfileID }
|
|
::= { alaEServiceSapProfileTable 1 }
|
|
|
|
AlaEServiceSapProfileEntry ::= SEQUENCE
|
|
{
|
|
alaEServiceSapProfileID SnmpAdminString,
|
|
alaEServiceSapProfileCVLANTreatment INTEGER,
|
|
alaEServiceSapProfileReplacementCVLAN Integer32,
|
|
alaEServiceSapProfilePriorityMapMode INTEGER,
|
|
alaEServiceSapProfileFixedPriority Integer32,
|
|
alaEServiceSapProfileIngressBW Integer32,
|
|
alaEServiceSapProfileBandwidthShare INTEGER,
|
|
alaEServiceSapProfileRowStatus RowStatus,
|
|
alaEServiceSapProfileEgressBW Integer32
|
|
}
|
|
|
|
alaEServiceSapProfileID OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (1..31))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A label given to uniquely identify this profile. Must be at least one character long."
|
|
::= { alaEServiceSapProfileEntry 1 }
|
|
|
|
alaEServiceSapProfileCVLANTreatment OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
stackSVLAN (1),
|
|
translate (2),
|
|
changeCVLAN (3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of VLAN stacking operation to be performed on a customer frame entering
|
|
this service. Stack Svlan (1) indicates that the SVLAN is to be pre-pended on the
|
|
frame before any existing 802.1Q tag. Translate (2) means to replace the existing
|
|
802.1Q tag with the SVLAN. Change CVLAN (3) indicates that the customer tag is to
|
|
remain on the frame but its value is to be changed to the supplied value."
|
|
DEFVAL { stackSVLAN }
|
|
::= { alaEServiceSapProfileEntry 2 }
|
|
|
|
alaEServiceSapProfileReplacementCVLAN OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4094)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The CVLAN ID to use when using the Change CVLAN treatment mode."
|
|
::= { alaEServiceSapProfileEntry 3 }
|
|
|
|
alaEServiceSapProfilePriorityMapMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
notAssigned (0),
|
|
mapInnerPtoOuterP (1),
|
|
mapInnerDscpToOuterP(2),
|
|
fixedP (3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes the source of the value for the priority field of the SVLAN
|
|
802.1Q tag when pre-pended to the customer data frame.NotAssigned(0), MapInnerPtoOuterP (1) uses
|
|
the priority field of the incoming frame when tagged to fill in the priority field
|
|
of the SVLAN tag. mapInnerDscpToOuterP (2) uses the frames priority bits in its IP
|
|
DSCP field to fill in the priority field of the SVLAN tag. FixedP (3) uses the
|
|
supplied FixedPriorityValue to fill in the SVLAN tag priority bits."
|
|
DEFVAL { fixedP }
|
|
::= { alaEServiceSapProfileEntry 4 }
|
|
|
|
alaEServiceSapProfileFixedPriority OBJECT-TYPE
|
|
SYNTAX Integer32 (0..7)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes the value of the priority field of the 802.1Q SVLAN tag
|
|
pre-pended to customer data frames when the fixed priority mapping mode is selected."
|
|
DEFVAL { 0 }
|
|
::= { alaEServiceSapProfileEntry 5 }
|
|
|
|
alaEServiceSapProfileIngressBW OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes this limit of ingress bandwidth for the traffic to which
|
|
this profile is applied. If 0, no bandwidth limit is applied. This number represents
|
|
traffic in units of 1,000,000 bits per second. Note that all CVLAN that belong to this
|
|
SAP will share this aggregated limit."
|
|
::= { alaEServiceSapProfileEntry 6 }
|
|
|
|
alaEServiceSapProfileBandwidthShare OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
notApplicable(0),
|
|
shared (1),
|
|
notShared(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes the use of the bandwidth limit in how it is applied across
|
|
multiple ports of the SAP. If set to notApplicable(0), the SAP is not used. If set
|
|
to Shared (1), all the ports that are part of the SAP will use aggregated
|
|
bandwidth, sharing some part of the bandwidth limit. If set to notShared (2),
|
|
each port will use its own bandwidth meter for this SAP. This value is not used
|
|
if ingressBandwidth is 0."
|
|
DEFVAL { shared }
|
|
::= { alaEServiceSapProfileEntry 7 }
|
|
|
|
alaEServiceSapProfileRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this table entry."
|
|
::= { alaEServiceSapProfileEntry 8 }
|
|
|
|
alaEServiceSapProfileEgressBW OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes this limit of egress bandwidth for each UNI
|
|
of the SAP to which this profile is applied. If 0, no bandwidth limit
|
|
is applied. This number represents traffic in units of Megabits per
|
|
second. Note that all CVLAN that belong to this SAP will share this
|
|
aggregated limit."
|
|
DEFVAL { 0 }
|
|
::= { alaEServiceSapProfileEntry 9 }
|
|
|
|
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
|
|
|
|
-- The E-Service UNI Profile Table
|
|
|
|
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
|
|
|
|
alaEServiceUNIProfileTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AlaEServiceUNIProfileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains service profiles containing performance and control attributes.
|
|
An entry in this table is created when a new service profile is defined."
|
|
::= { alaEService 3 }
|
|
|
|
alaEServiceUNIProfileEntry OBJECT-TYPE
|
|
SYNTAX AlaEServiceUNIProfileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A E-Service Service Profile entry."
|
|
INDEX { IMPLIED alaEServiceUNIProfileID }
|
|
::= { alaEServiceUNIProfileTable 1 }
|
|
|
|
AlaEServiceUNIProfileEntry ::= SEQUENCE
|
|
{
|
|
alaEServiceUNIProfileID SnmpAdminString,
|
|
alaEServiceUNIProfileStpBpduTreatment AlaEServiceUNIProfileProtocolTreatment,
|
|
alaEServiceUNIProfile8021xTreatment AlaEServiceUNIProfileProtocolTreatment,
|
|
alaEServiceUNIProfile8021ABTreatment AlaEServiceUNIProfileProtocolTreatment,
|
|
alaEServiceUNIProfile8023adTreatment AlaEServiceUNIProfileProtocolTreatment,
|
|
alaEServiceUNIProfileGvrpTreatment AlaEServiceUNIProfileProtocolTreatment,
|
|
alaEServiceUNIProfileAmapTreatment AlaEServiceUNIProfileProtocolTreatment,
|
|
alaEServiceUNIProfileMvrpTreatment AlaEServiceUNIProfileProtocolTreatment,
|
|
alaEServiceUNIProfileRowStatus RowStatus
|
|
}
|
|
|
|
alaEServiceUNIProfileID OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (1..31))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A label given to uniquely identify this profile. Must be at least one character long."
|
|
::= { alaEServiceUNIProfileEntry 1 }
|
|
|
|
alaEServiceUNIProfileStpBpduTreatment OBJECT-TYPE
|
|
SYNTAX AlaEServiceUNIProfileProtocolTreatment
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes the behavior of the bridge in regards to the spanning tree
|
|
protocol BPDU received on the UNI. Tunnel (1) enables the PDU to be tunneled across
|
|
the provider network. Discard (2) causes the PDU of the protocol to be discarded
|
|
and not enter the provider network. Peer (3) means that on this port the bridge
|
|
is to participate in the protocol. Currnetly Peer is not supported for Spanning Tree"
|
|
DEFVAL { tunnel }
|
|
::= { alaEServiceUNIProfileEntry 2 }
|
|
|
|
alaEServiceUNIProfile8021xTreatment OBJECT-TYPE
|
|
SYNTAX AlaEServiceUNIProfileProtocolTreatment
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes the behavior of the bridge in regards to the IEEE 802.1x PDU
|
|
frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across
|
|
the provider network. Discard (2) causes the PDU of the protocol to be discarded
|
|
and not enter the provider network. Peer (3) means that on this port the bridge
|
|
is to participate in the protocol. Currnetly only drop is supported"
|
|
DEFVAL { drop }
|
|
::= { alaEServiceUNIProfileEntry 3 }
|
|
|
|
alaEServiceUNIProfile8021ABTreatment OBJECT-TYPE
|
|
SYNTAX AlaEServiceUNIProfileProtocolTreatment
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes the behavior of the bridge in regards to the IEEE 802.1AB PDU
|
|
frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across
|
|
the provider network. Discard (2) causes the PDU of the protocol to be discarded
|
|
and not enter the provider network. Peer (3) means that on this port the bridge
|
|
is to participate in the protocol. Currently only drop is supported"
|
|
DEFVAL { drop }
|
|
::= { alaEServiceUNIProfileEntry 4 }
|
|
|
|
alaEServiceUNIProfile8023adTreatment OBJECT-TYPE
|
|
SYNTAX AlaEServiceUNIProfileProtocolTreatment
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes the behavior of the bridge in regards to the IEEE 802.1ad PDU
|
|
frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across
|
|
the provider network. Discard (2) causes the PDU of the protocol to be discarded
|
|
and not enter the provider network. Peer (3) means that on this port the bridge
|
|
is to participate in the protocol. Currently only peer is supported"
|
|
DEFVAL { peer }
|
|
::= { alaEServiceUNIProfileEntry 5 }
|
|
|
|
alaEServiceUNIProfileGvrpTreatment OBJECT-TYPE
|
|
SYNTAX AlaEServiceUNIProfileProtocolTreatment
|
|
MAX-ACCESS read-create
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object describes the behavior of the bridge in regards to the GVRP PDU
|
|
frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across
|
|
the provider network. Discard (2) causes the PDU of the protocol to be discarded
|
|
and not enter the provider network. Peer (3) means that on this port the bridge
|
|
is to participate in the protocol. Currently peer is not supported for GVRP"
|
|
DEFVAL { tunnel }
|
|
::= { alaEServiceUNIProfileEntry 6 }
|
|
|
|
alaEServiceUNIProfileAmapTreatment OBJECT-TYPE
|
|
SYNTAX AlaEServiceUNIProfileProtocolTreatment
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes the behavior of the bridge in regards to the Alcatel
|
|
propietary AMAP PDU frames received on the UNI. Tunnel (1) enables the PDU to
|
|
be tunneled across the provider network. Discard (2) causes the PDU of the
|
|
protocol to be discarded and not enter the provider network. Peer (3) means
|
|
that on this port the bridge is to participate in the protocol. Currently
|
|
drop is only supported"
|
|
DEFVAL { drop }
|
|
::= { alaEServiceUNIProfileEntry 7 }
|
|
|
|
alaEServiceUNIProfileMvrpTreatment OBJECT-TYPE
|
|
SYNTAX AlaEServiceUNIProfileProtocolTreatment
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes the behavior of the bridge in regards to the MVRP PDU
|
|
frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across
|
|
the provider network. Discard (2) causes the PDU of the protocol to be discarded
|
|
and not enter the provider network. Peer (3) means that on this port the bridge
|
|
is to participate in the protocol. Currently peer is not supported for MVRP"
|
|
DEFVAL { tunnel }
|
|
::= { alaEServiceUNIProfileEntry 8 }
|
|
|
|
alaEServiceUNIProfileRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this table entry."
|
|
::= { alaEServiceUNIProfileEntry 9 }
|
|
|
|
|
|
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
|
|
|
|
-- The E-Service Service Table
|
|
|
|
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
|
|
|
|
alaEServiceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AlaEServiceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains the services and their assigned SVLAN for the
|
|
E-Service feature."
|
|
::= { alaEService 4 }
|
|
|
|
alaEServiceEntry OBJECT-TYPE
|
|
SYNTAX AlaEServiceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The svlan/ipmvlan-port association."
|
|
INDEX { IMPLIED alaEServiceID }
|
|
::= { alaEServiceTable 1 }
|
|
|
|
AlaEServiceEntry ::= SEQUENCE
|
|
{
|
|
alaEServiceID SnmpAdminString,
|
|
alaEServiceSVLAN Integer32,
|
|
alaEServiceVlanType INTEGER,
|
|
alaEServiceRowStatus RowStatus
|
|
}
|
|
|
|
alaEServiceID OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE(1..32))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A label given to uniquely identify this Service. Must be at least one character long."
|
|
::= { alaEServiceEntry 1 }
|
|
|
|
alaEServiceSVLAN OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4094)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SVLAN number of the SVLAN chosen to the be transport for this service."
|
|
::= { alaEServiceEntry 2 }
|
|
|
|
alaEServiceVlanType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(0),
|
|
svlan(1),
|
|
ipmvlan(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of the vlan this service is going to attach to. When creating the service,
|
|
the type should match the vlanId specified in the request."
|
|
::= { alaEServiceEntry 3 }
|
|
|
|
alaEServiceRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this table entry. The supported value for set are
|
|
createAndGo (4) and destroy(6), to add or remove a service. When
|
|
creating or deleting the service, the user needs to provide both
|
|
the svlan and the vlantype objects."
|
|
::= { alaEServiceEntry 4 }
|
|
|
|
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
|
|
|
|
-- The E-Service SAP Table
|
|
|
|
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
|
|
alaEServiceSapTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AlaEServiceSapEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains the Service Access Points (Sap) listed by ID.
|
|
This table is used to create, delete, and modify the SAP's profile"
|
|
::= { alaEService 5 }
|
|
|
|
alaEServiceSapEntry OBJECT-TYPE
|
|
SYNTAX AlaEServiceSapEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The list of SAP."
|
|
INDEX { alaEServiceSapID}
|
|
::= { alaEServiceSapTable 1 }
|
|
|
|
AlaEServiceSapEntry ::= SEQUENCE
|
|
{
|
|
alaEServiceSapID Integer32,
|
|
alaEServiceSapServiceID SnmpAdminString,
|
|
alaEServiceSapProfile SnmpAdminString,
|
|
alaEServiceSapRowStatus RowStatus
|
|
}
|
|
|
|
alaEServiceSapID OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A Number given to uniquely identify the SAP."
|
|
::= { alaEServiceSapEntry 1 }
|
|
|
|
alaEServiceSapServiceID OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE(1..32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A label given to uniquely identify the Service this SAP is for. Must
|
|
be at least one character long."
|
|
::= { alaEServiceSapEntry 2 }
|
|
|
|
alaEServiceSapProfile OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE(1..32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The string identifying the SAP Profile this sap is to use. If specified, must match an existing
|
|
SAP Profile."
|
|
::= { alaEServiceSapEntry 3 }
|
|
|
|
alaEServiceSapRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this table entry. The supported value for set are
|
|
createAndGo (4) and destroy(6), to add or remove a sap. When
|
|
creating the sap, the user needs to provide the service name in
|
|
the same set request."
|
|
::= { alaEServiceSapEntry 4 }
|
|
|
|
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
|
|
|
|
-- The E-Service SAP CVLAN Table
|
|
|
|
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
|
|
|
|
alaEServiceSapCvlanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AlaEServiceSapCvlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains the Service Access Points (Sap) where the CVLANs are bound
|
|
to their service."
|
|
::= { alaEService 6 }
|
|
|
|
alaEServiceSapCvlanEntry OBJECT-TYPE
|
|
SYNTAX AlaEServiceSapCvlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The CVLAN to Sap binding."
|
|
INDEX { alaEServiceSapCvlanSapID, alaEServiceSapCvlanCvlan }
|
|
::= { alaEServiceSapCvlanTable 1 }
|
|
|
|
AlaEServiceSapCvlanEntry ::= SEQUENCE
|
|
{
|
|
alaEServiceSapCvlanSapID Integer32,
|
|
alaEServiceSapCvlanCvlan Integer32,
|
|
alaEServiceSapCvlanMapType INTEGER,
|
|
alaEServiceSapCvlanRowStatus RowStatus
|
|
}
|
|
|
|
alaEServiceSapCvlanSapID OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A Number given to uniquely identify this SAP."
|
|
::= { alaEServiceSapCvlanEntry 1 }
|
|
|
|
alaEServiceSapCvlanCvlan OBJECT-TYPE
|
|
SYNTAX Integer32 (0..4094)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is the CVLAN ID that this binding is targeted at. The CVLAN ID
|
|
may be 0, which indicates an all or untagged only mapping type."
|
|
::= { alaEServiceSapCvlanEntry 2 }
|
|
|
|
alaEServiceSapCvlanMapType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
single (1),
|
|
all(2),
|
|
untaggedOnly (3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is the mapping type that defines what CVLANs are mapped into this service.
|
|
Multiple mappings can be defined for CVLAN to service, however only one all (2) or
|
|
untaggedOnly (3) mapping entry can be created per UNI. A mapping type of Single (1)
|
|
denotes a specific CVLAN value to bind to the service. A mapping type of All (2)
|
|
denotes that all customer frames that do not map to any other SAP,
|
|
will be mapped into this service. A mapping type of Untagged (3) denotes that only
|
|
the untagged frames will be mapped into this service."
|
|
DEFVAL { single }
|
|
::= { alaEServiceSapCvlanEntry 3 }
|
|
|
|
alaEServiceSapCvlanRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this table entry. The supported value for set are
|
|
createAndGo (4) and destroy(6), to add or remove a SAP."
|
|
::= { alaEServiceSapCvlanEntry 4 }
|
|
|
|
|
|
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
|
|
|
|
-- The E-Service Port Table
|
|
|
|
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
|
|
|
|
alaEServicePortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AlaEServicePortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains the ports used by the EService feature. Both UNI and NNI
|
|
are listed here."
|
|
::= { alaEService 7 }
|
|
|
|
alaEServicePortEntry OBJECT-TYPE
|
|
SYNTAX AlaEServicePortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The list of ports being used by EService."
|
|
INDEX { alaEServicePortID}
|
|
::= { alaEServicePortTable 1 }
|
|
|
|
AlaEServicePortEntry ::= SEQUENCE
|
|
{
|
|
alaEServicePortID InterfaceIndex,
|
|
alaEServicePortType INTEGER,
|
|
alaEServicePortVendorTpid Integer32,
|
|
alaEServicePortLegacyStpBpdu INTEGER,
|
|
alaEServicePortLegacyGvrpPdu INTEGER,
|
|
alaEServicePortUniProfile SnmpAdminString,
|
|
alaEServicePortTransBridging INTEGER,
|
|
alaEServicePortLegacyMvrpPdu INTEGER,
|
|
alaEServicePortRowStatus RowStatus
|
|
}
|
|
|
|
alaEServicePortID OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IfIndex of this UNI or NNI Port."
|
|
::= { alaEServicePortEntry 1 }
|
|
|
|
alaEServicePortType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
uni (1),
|
|
nni (3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of port for Vlan Stacking operation. uni (1) represents a customer facing
|
|
port on which traffic may enter the E-Service. nni (2) respresents a provider network
|
|
port over which the E-Service may be connected."
|
|
DEFVAL { uni }
|
|
::= { alaEServicePortEntry 2 }
|
|
|
|
alaEServicePortVendorTpid OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"he TPID for this port if type is NNI. It is used for the incoming data
|
|
traffic parsing and it is substituted to the 802.1Q standard Tpid for
|
|
the outgoing data traffic. This is used for compatibility with other vendor
|
|
equipment. The default value is the standard value 0x8100."
|
|
DEFVAL { 33024 }
|
|
::= { alaEServicePortEntry 3 }
|
|
|
|
alaEServicePortLegacyStpBpdu OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
notApplicable (0),
|
|
enable (1),
|
|
disable (2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The legacy STP BPDU treatment for this port if NNI. It defines the type of processing
|
|
applied to STP legacy BPDUs on network ports. Legacy BPDU refer to conventional/customer
|
|
BPDUs with MAC address 01:80:c2:00:00:00 and its processing on network ports can be
|
|
enabled/disabled by this object.By default the value is disabled i.e
|
|
provider MAC BPDU with MAC address 01:80:c2:00:00:08 would be processed at network ports."
|
|
DEFVAL { disable }
|
|
::= { alaEServicePortEntry 4 }
|
|
|
|
alaEServicePortLegacyGvrpPdu OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
notApplicable (0),
|
|
enable (1),
|
|
disable (2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The legacy GVRP PDU treatment for this port if NNI. It defines the type of processing
|
|
applied to GVRP PDUs on network ports. "
|
|
DEFVAL { disable }
|
|
::= { alaEServicePortEntry 5 }
|
|
|
|
alaEServicePortUniProfile OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (1..31))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The label of an existing UNI profile that which contains various properties to be
|
|
applied to this port if UNI."
|
|
::= { alaEServicePortEntry 6 }
|
|
|
|
alaEServicePortTransBridging OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enable (1),
|
|
disable (2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Transparent Bridging status for the nni Port."
|
|
DEFVAL { disable }
|
|
::= { alaEServicePortEntry 7 }
|
|
|
|
alaEServicePortLegacyMvrpPdu OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
notApplicable (0),
|
|
enable (1),
|
|
disable (2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The legacy MVRP PDU treatment for this port if NNI. It defines the type of processing
|
|
applied to MVRP PDUs on network ports. "
|
|
DEFVAL { disable }
|
|
::= { alaEServicePortEntry 8 }
|
|
|
|
alaEServicePortRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this table entry. The supported value for set are
|
|
createAndGo (4) and destroy(6), to add or remove a binding"
|
|
::= { alaEServicePortEntry 9 }
|
|
|
|
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
|
|
|
|
-- The E-Service SAP-UNI Binding Table
|
|
|
|
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
|
|
alaEServiceSapUniTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AlaEServiceSapUniEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains the UNI that are bound to each SAP for classifying
|
|
traffic into each EService. Not that writing to this table may create
|
|
a new UNI."
|
|
::= { alaEService 8 }
|
|
|
|
alaEServiceSapUniEntry OBJECT-TYPE
|
|
SYNTAX AlaEServiceSapUniEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The list of SAP-UNI bindings being used by EService."
|
|
INDEX { alaEServiceSapUniSap, alaEServiceSapUniUni}
|
|
::= { alaEServiceSapUniTable 1 }
|
|
|
|
AlaEServiceSapUniEntry ::= SEQUENCE
|
|
{
|
|
alaEServiceSapUniSap Integer32,
|
|
alaEServiceSapUniUni InterfaceIndex,
|
|
alaEServiceSapUniRowStatus RowStatus
|
|
}
|
|
|
|
|
|
alaEServiceSapUniSap OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SAP ID that is configured onto this port."
|
|
::= { alaEServiceSapUniEntry 1 }
|
|
|
|
alaEServiceSapUniUni OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IfIndex of this UNI Port."
|
|
::= { alaEServiceSapUniEntry 2 }
|
|
|
|
alaEServiceSapUniRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this table entry. The supported value for set are
|
|
createAndGo (4) and destroy(6), to add or remove a binding"
|
|
::= { alaEServiceSapUniEntry 3 }
|
|
|
|
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
|
|
|
|
-- The E-Service NNI-SVLAN Binding Table
|
|
|
|
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
|
|
alaEServiceNniSvlanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AlaEServiceNniSvlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains the SVLANs bound to each NNI for use by the
|
|
EService feature."
|
|
::= { alaEService 9 }
|
|
|
|
alaEServiceNniSvlanEntry OBJECT-TYPE
|
|
SYNTAX AlaEServiceNniSvlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The list of NNI-SVLAN bindings being used by EService."
|
|
INDEX { alaEServiceNniSvlanNni, alaEServiceNniSvlanSvlan}
|
|
::= { alaEServiceNniSvlanTable 1 }
|
|
|
|
AlaEServiceNniSvlanEntry ::= SEQUENCE
|
|
{
|
|
alaEServiceNniSvlanNni InterfaceIndex,
|
|
alaEServiceNniSvlanSvlan Integer32,
|
|
alaEServiceNniSvlanRowStatus RowStatus,
|
|
alaEServiceNniSvlanVpaType INTEGER
|
|
}
|
|
|
|
alaEServiceNniSvlanNni OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IfIndex of this NNI Port."
|
|
::= { alaEServiceNniSvlanEntry 1 }
|
|
|
|
alaEServiceNniSvlanSvlan OBJECT-TYPE
|
|
SYNTAX Integer32 (2..4094)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SVLAN bound to this port. SVLAN cannot be 1."
|
|
::= { alaEServiceNniSvlanEntry 2 }
|
|
|
|
alaEServiceNniSvlanRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this table entry. The supported value for set are
|
|
createAndGo (4) and destroy(6), to add or remove a binding"
|
|
::= { alaEServiceNniSvlanEntry 3 }
|
|
|
|
-- alaEServiceNniSvlanVpaType is added in 6.3.4.R01
|
|
|
|
alaEServiceNniSvlanVpaType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
stp (1),
|
|
erp (2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object is used to specify whether the VPA state is to
|
|
be controlled by an ERP or a STP. By default VPA state is
|
|
controlled by STP."
|
|
DEFVAL { stp }
|
|
::= { alaEServiceNniSvlanEntry 4 }
|
|
|
|
alaEServiceGlobals OBJECT IDENTIFIER ::= { alaEService 10 }
|
|
|
|
alaEServiceGlobalTransBridging OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enable (1),
|
|
disable (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The global transparent bridging status."
|
|
DEFVAL { disable }
|
|
::= { alaEServiceGlobals 1 }
|
|
|
|
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
|
|
-- COMPLIANCE
|
|
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
|
|
|
|
alcatelIND1EServiceMIBCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Compliance statement for E-Service."
|
|
MODULE MANDATORY-GROUPS
|
|
{
|
|
alaEServiceSapProfileGroup,
|
|
alaEServiceUNIProfileGroup,
|
|
alaEServiceGroup,
|
|
alaEServiceSapGroup,
|
|
alaEServiceSapUniGroup,
|
|
alaEServiceSapCvlanGroup,
|
|
alaEServicePortGroup,
|
|
alaEServiceNniSvlanGroup,
|
|
alaEServiceInfoGroup,
|
|
alaEServiceGlobalGroup
|
|
}
|
|
::= { alcatelIND1EServiceMIBCompliances 1 }
|
|
|
|
|
|
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
|
|
-- UNITS OF CONFORMANCE
|
|
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
|
|
|
|
alaEServiceSapProfileGroup OBJECT-GROUP
|
|
OBJECTS
|
|
{
|
|
alaEServiceSapProfileCVLANTreatment,
|
|
alaEServiceSapProfileReplacementCVLAN,
|
|
alaEServiceSapProfilePriorityMapMode,
|
|
alaEServiceSapProfileFixedPriority,
|
|
alaEServiceSapProfileIngressBW,
|
|
alaEServiceSapProfileBandwidthShare,
|
|
alaEServiceSapProfileRowStatus,
|
|
alaEServiceSapProfileEgressBW
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Collection of objects for management of E-Service Sap Profiles."
|
|
::= { alcatelIND1EServiceMIBGroups 1 }
|
|
|
|
alaEServiceUNIProfileGroup OBJECT-GROUP
|
|
OBJECTS
|
|
{
|
|
alaEServiceUNIProfileStpBpduTreatment,
|
|
alaEServiceUNIProfile8021xTreatment,
|
|
alaEServiceUNIProfile8021ABTreatment,
|
|
alaEServiceUNIProfile8023adTreatment,
|
|
alaEServiceUNIProfileGvrpTreatment,
|
|
alaEServiceUNIProfileAmapTreatment,
|
|
alaEServiceUNIProfileMvrpTreatment,
|
|
alaEServiceUNIProfileRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Collection of objects for management of EService UNI Profiles."
|
|
::= { alcatelIND1EServiceMIBGroups 2 }
|
|
|
|
alaEServiceGroup OBJECT-GROUP
|
|
OBJECTS
|
|
{
|
|
alaEServiceSVLAN,
|
|
alaEServiceVlanType,
|
|
alaEServiceRowStatus
|
|
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Collection of objects for management of E-Services."
|
|
::= { alcatelIND1EServiceMIBGroups 3 }
|
|
|
|
alaEServiceSapGroup OBJECT-GROUP
|
|
OBJECTS
|
|
{
|
|
|
|
alaEServiceSapServiceID,
|
|
alaEServiceSapProfile,
|
|
alaEServiceSapRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Collection of objects for management of E-Service SAPs."
|
|
::= { alcatelIND1EServiceMIBGroups 4 }
|
|
|
|
alaEServiceSapCvlanGroup OBJECT-GROUP
|
|
OBJECTS
|
|
{
|
|
alaEServiceSapCvlanMapType,
|
|
alaEServiceSapCvlanRowStatus
|
|
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Collection of objects for management of E-Service SAP CVLAN bindings."
|
|
::= { alcatelIND1EServiceMIBGroups 5 }
|
|
|
|
|
|
alaEServicePortGroup OBJECT-GROUP
|
|
OBJECTS
|
|
{
|
|
alaEServicePortType,
|
|
alaEServicePortVendorTpid,
|
|
alaEServicePortLegacyStpBpdu,
|
|
alaEServicePortLegacyGvrpPdu,
|
|
alaEServicePortUniProfile,
|
|
alaEServicePortTransBridging,
|
|
alaEServicePortLegacyMvrpPdu,
|
|
alaEServicePortRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Collection of objects for management of E-Service Ports."
|
|
::= { alcatelIND1EServiceMIBGroups 6 }
|
|
|
|
alaEServiceSapUniGroup OBJECT-GROUP
|
|
OBJECTS
|
|
{
|
|
alaEServiceSapUniRowStatus
|
|
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Collection of objects for management of E-Service SAP to UNI
|
|
Binding."
|
|
::= { alcatelIND1EServiceMIBGroups 7 }
|
|
|
|
alaEServiceNniSvlanGroup OBJECT-GROUP
|
|
OBJECTS
|
|
{
|
|
alaEServiceNniSvlanRowStatus,
|
|
alaEServiceNniSvlanVpaType
|
|
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Collection of objects for management of E-Service SVLAN to NNI
|
|
Binding."
|
|
::= { alcatelIND1EServiceMIBGroups 8 }
|
|
|
|
|
|
alaEServiceInfoGroup OBJECT-GROUP
|
|
OBJECTS
|
|
{
|
|
alaEServiceMode
|
|
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Collection of objects for management of E-Service Info
|
|
Binding."
|
|
::= { alcatelIND1EServiceMIBGroups 9 }
|
|
|
|
alaEServiceGlobalGroup OBJECT-GROUP
|
|
OBJECTS
|
|
{
|
|
alaEServiceGlobalTransBridging
|
|
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Collection of objects for management of E-Service global
|
|
configuration."
|
|
::= { alcatelIND1EServiceMIBGroups 10 }
|
|
END
|
|
|