517 lines
17 KiB
Plaintext
517 lines
17 KiB
Plaintext
ALCATEL-IND1-OSPF3-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, Integer32, Unsigned32, Gauge32
|
|
FROM SNMPv2-SMI
|
|
MODULE-COMPLIANCE, OBJECT-GROUP
|
|
FROM SNMPv2-CONF
|
|
routingIND1Ospf3
|
|
FROM ALCATEL-IND1-BASE
|
|
ospfv3AreaEntry, ospfv3IfEntry
|
|
FROM OSPFV3-MIB
|
|
Ipv6Address, Ipv6IfIndexOrZero
|
|
FROM IPV6-TC;
|
|
|
|
|
|
alcatelIND1OSPF3MIB MODULE-IDENTITY
|
|
|
|
LAST-UPDATED "201410060000Z"
|
|
ORGANIZATION "Alcatel-Lucent"
|
|
CONTACT-INFO
|
|
"Please consult with Customer Service to ensure the most appropriate
|
|
version of this document is used with the products in question:
|
|
|
|
Alcatel-Lucent, Enterprise Solutions Division
|
|
(Formerly Alcatel Internetworking, Incorporated)
|
|
26801 West Agoura Road
|
|
Agoura Hills, CA 91301-5122
|
|
United States Of America
|
|
|
|
Telephone: North America +1 800 995 2696
|
|
Latin America +1 877 919 9526
|
|
Europe +31 23 556 0100
|
|
Asia +65 394 7933
|
|
All Other +1 818 878 4507
|
|
|
|
Electronic Mail: support@ind.alcatel.com
|
|
World Wide Web: http://alcatel-lucent.com/wps/portal/enterprise
|
|
File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs"
|
|
|
|
DESCRIPTION
|
|
"This module describes an authoritative enterprise-specific Simple
|
|
Network Management Protocol (SNMP) Management Information Base (MIB):
|
|
|
|
This proprietary MIB contains management information for
|
|
the configuration of OSPFv3 global configuration parameters.
|
|
|
|
The right to make changes in specification and other information
|
|
contained in this document without prior notice is reserved.
|
|
|
|
No liability shall be assumed for any incidental, indirect, special, o
|
|
r
|
|
consequential damages whatsoever arising from or related to this
|
|
document or the information contained herein.
|
|
|
|
Vendors, end-users, and other interested parties are granted
|
|
non-exclusive license to use this specification in connection with
|
|
management of the products for which it is intended to be used.
|
|
|
|
Copyright (C) 1995-2003 Alcatel-Lucent
|
|
ALL RIGHTS RESERVED WORLDWIDE"
|
|
|
|
REVISION "201410060000Z"
|
|
DESCRIPTION
|
|
"Added alaOspf3RouteTable."
|
|
|
|
REVISION "200704030000Z"
|
|
DESCRIPTION
|
|
"The latest version of this MIB Module."
|
|
|
|
::= { routingIND1Ospf3 1 }
|
|
|
|
alcatelIND1OSPF3MIBObjects OBJECT IDENTIFIER ::= { alcatelIND1OSPF3MIB 1 }
|
|
alaProtocolOspf3 OBJECT IDENTIFIER ::= { alcatelIND1OSPF3MIBObjects 1 }
|
|
|
|
alaOspf3OrigRouteTag OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Route tag that is originated with ASEs"
|
|
DEFVAL { 0 }
|
|
::= {alaProtocolOspf3 1 }
|
|
|
|
alaOspf3TimerSpfDelay OBJECT-TYPE
|
|
SYNTAX Integer32 ( 0 .. 65535 )
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Delay (in seconds) between topology change and SPF run"
|
|
DEFVAL { 5 }
|
|
::= {alaProtocolOspf3 2 }
|
|
|
|
alaOspf3TimerSpfHold OBJECT-TYPE
|
|
SYNTAX Integer32 ( 0 .. 65535 )
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Delay (in seconds) between subsequent SPF executions"
|
|
DEFVAL { 10 }
|
|
::= {alaProtocolOspf3 3 }
|
|
|
|
alaOspf3RestartHelperSupport OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enable (1),
|
|
disable (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This router can be a helper to another restarting router"
|
|
DEFVAL { enable }
|
|
::= {alaProtocolOspf3 4 }
|
|
|
|
alaOspf3RestartStrictLsaChecking OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enable (1),
|
|
disable (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Will changed LSA result in restart termination"
|
|
DEFVAL { enable }
|
|
::= {alaProtocolOspf3 5 }
|
|
|
|
alaOspf3RestartInitiate OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enable (1),
|
|
disable (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Start a graceful restart"
|
|
::= {alaProtocolOspf3 6 }
|
|
|
|
alaOspf3MTUCheck OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enable (1),
|
|
disable (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Verify the MTU of a neighbor matches our own."
|
|
::= {alaProtocolOspf3 7 }
|
|
|
|
-- Route Table
|
|
|
|
alaOspf3RouteTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AlaOspf3RouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"OSPF3 Routing table. This table contains
|
|
an entry for each valid OSPF unicast route that
|
|
can be used for packet forwarding determination.
|
|
It is for display purposes only."
|
|
::= { alaProtocolOspf3 8 }
|
|
|
|
alaOspf3RouteEntry OBJECT-TYPE
|
|
SYNTAX AlaOspf3RouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A routing entry."
|
|
INDEX {
|
|
alaOspf3RouteDest,
|
|
alaOspf3RoutePfxLength,
|
|
alaOspf3RouteNextHop,
|
|
alaOspf3RouteIfIndex
|
|
}
|
|
::= { alaOspf3RouteTable 1 }
|
|
|
|
AlaOspf3RouteEntry ::=
|
|
SEQUENCE {
|
|
alaOspf3RouteDest Ipv6Address,
|
|
alaOspf3RoutePfxLength Integer32,
|
|
alaOspf3RouteNextHop Ipv6Address,
|
|
alaOspf3RouteIfIndex Ipv6IfIndexOrZero,
|
|
alaOspf3RouteType INTEGER,
|
|
alaOspf3RoutePathType INTEGER,
|
|
alaOspf3RouteMetric1 Unsigned32,
|
|
alaOspf3RouteMetric2 Unsigned32
|
|
}
|
|
|
|
alaOspf3RouteDest OBJECT-TYPE
|
|
SYNTAX Ipv6Address
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination IPv6 address of this route."
|
|
::= { alaOspf3RouteEntry 1 }
|
|
|
|
alaOspf3RoutePfxLength OBJECT-TYPE
|
|
SYNTAX Integer32(0..128)
|
|
UNITS "bits"
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the prefix length of the destination
|
|
address."
|
|
::= { alaOspf3RouteEntry 2 }
|
|
|
|
alaOspf3RouteNextHop OBJECT-TYPE
|
|
SYNTAX Ipv6Address
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"On remote routes, the address of the next
|
|
system en route; otherwise, ::0
|
|
('00000000000000000000000000000000'H in ASN.1
|
|
string representation)."
|
|
::= { alaOspf3RouteEntry 3 }
|
|
|
|
alaOspf3RouteIfIndex OBJECT-TYPE
|
|
SYNTAX Ipv6IfIndexOrZero
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index value which uniquely identifies the local
|
|
interface through which the next hop of this
|
|
route should be reached."
|
|
::= { alaOspf3RouteEntry 4 }
|
|
|
|
alaOspf3RouteType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
host(1), -- host route
|
|
other(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of this route."
|
|
::= { alaOspf3RouteEntry 5 }
|
|
|
|
alaOspf3RoutePathType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
intraArea(1), -- intra area route
|
|
interArea(2), -- inter area route
|
|
externalType1(3), -- external type-1 route
|
|
externalType2(4) -- external type-2 route
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The routing metric path type for this route."
|
|
::= { alaOspf3RouteEntry 6 }
|
|
|
|
alaOspf3RouteMetric1 OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The primary routing metric for this route."
|
|
::= { alaOspf3RouteEntry 7 }
|
|
|
|
alaOspf3RouteMetric2 OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An alternate routing metric for this route. It's 0
|
|
for internal routes. For an external route, it's the metric
|
|
to reach the ASBR that announced the external route."
|
|
::= { alaOspf3RouteEntry 8 }
|
|
|
|
alaOspf3BfdStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables or disables bfd for OSPF protocol"
|
|
DEFVAL { disable }
|
|
::= { alaProtocolOspf3 9}
|
|
|
|
alaOspf3BfdAllInterfaceStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables or disables bfd for all OSPF interfaces"
|
|
DEFVAL { disable }
|
|
::= { alaProtocolOspf3 10}
|
|
|
|
-- ************************************************************************
|
|
-- Expansion of ospfv3IfTable
|
|
-- ************************************************************************
|
|
alaOspf3IfAugTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AlaOspf3IfAugEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Expansion for ospf3IfTable"
|
|
::= { alaProtocolOspf3 11 }
|
|
|
|
alaOspf3IfAugEntry OBJECT-TYPE
|
|
SYNTAX AlaOspf3IfAugEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of alaOspf3IfAugTable"
|
|
AUGMENTS { ospfv3IfEntry }
|
|
::= { alaOspf3IfAugTable 1 }
|
|
|
|
AlaOspf3IfAugEntry ::=
|
|
SEQUENCE {
|
|
alaOspf3IfBfdStatus INTEGER,
|
|
alaOspf3IfBfdDrsOnly INTEGER
|
|
}
|
|
|
|
alaOspf3IfBfdStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables/Disables OSP3F for a BFD interface"
|
|
::= { alaOspf3IfAugEntry 1}
|
|
|
|
alaOspf3IfBfdDrsOnly OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables/Disables Drs Only option for a BFD interface"
|
|
::= { alaOspf3IfAugEntry 2}
|
|
|
|
alaOspf3AreaAugTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AlaOspf3AreaAugEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table extends the ofpv3 area table and it is used to
|
|
display very granular LSA Counts, Host and Interface counts"
|
|
::= { alaProtocolOspf3 12 }
|
|
|
|
alaOspf3AreaAugEntry OBJECT-TYPE
|
|
SYNTAX AlaOspf3AreaAugEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of alaOspf3AreaAugTable"
|
|
AUGMENTS { ospfv3AreaEntry }
|
|
::= { alaOspf3AreaAugTable 1 }
|
|
|
|
AlaOspf3AreaAugEntry ::= SEQUENCE {
|
|
alaOspf3AreaRouterLsaCount Gauge32,
|
|
alaOspf3AreaNetworkLsaCount Gauge32,
|
|
alaOspf3AreaIntraAreaPrefixLsaCount Gauge32,
|
|
alaOspf3AreaInterAreaPrefixLsaCount Gauge32,
|
|
alaOspf3AreaInterAreaRouterLsaCount Gauge32,
|
|
alaOspf3AreaHostCount Gauge32,
|
|
alaOspf3AreaInterfaceCount Gauge32,
|
|
alaOspf3AreaSummarizationRangeCount Gauge32
|
|
}
|
|
|
|
alaOspf3AreaRouterLsaCount OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the Router LSA Count."
|
|
::= { alaOspf3AreaAugEntry 1 }
|
|
|
|
alaOspf3AreaNetworkLsaCount OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the Network LSA Count."
|
|
::= { alaOspf3AreaAugEntry 2 }
|
|
|
|
alaOspf3AreaIntraAreaPrefixLsaCount OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the Intra Area LSA Count."
|
|
::= { alaOspf3AreaAugEntry 3 }
|
|
|
|
alaOspf3AreaInterAreaPrefixLsaCount OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the Inter area LSA Count."
|
|
::= { alaOspf3AreaAugEntry 4 }
|
|
|
|
alaOspf3AreaInterAreaRouterLsaCount OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the inter area Router LSA Count."
|
|
::= { alaOspf3AreaAugEntry 5 }
|
|
|
|
alaOspf3AreaHostCount OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the host count."
|
|
::= { alaOspf3AreaAugEntry 6 }
|
|
|
|
alaOspf3AreaInterfaceCount OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the Interface count."
|
|
::= { alaOspf3AreaAugEntry 7 }
|
|
|
|
alaOspf3AreaSummarizationRangeCount OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the summarization range count."
|
|
::= { alaOspf3AreaAugEntry 8 }
|
|
|
|
|
|
-- conformance information
|
|
|
|
alcatelIND1OSPF3MIBConformance OBJECT IDENTIFIER ::= { alcatelIND1OSPF3MIB 2 }
|
|
alcatelIND1OSPF3MIBCompliances OBJECT IDENTIFIER ::=
|
|
{ alcatelIND1OSPF3MIBConformance 1 }
|
|
alcatelIND1OSPF3MIBGroups OBJECT IDENTIFIER ::=
|
|
{ alcatelIND1OSPF3MIBConformance 2 }
|
|
|
|
-- compliance statements
|
|
|
|
alcatelIND1OSPF3MIBCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for OSPFv3
|
|
and implementing the ALCATEL-IND1-OSPF3 MIB."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS { alaOSPF3ConfigMIBGroup }
|
|
|
|
::= { alcatelIND1OSPF3MIBCompliances 1 }
|
|
|
|
-- units of conformance
|
|
|
|
alaOSPF3ConfigMIBGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
alaOspf3OrigRouteTag,
|
|
alaOspf3TimerSpfDelay,
|
|
alaOspf3TimerSpfHold,
|
|
alaOspf3RestartHelperSupport,
|
|
alaOspf3RestartStrictLsaChecking,
|
|
alaOspf3RestartInitiate,
|
|
alaOspf3MTUCheck
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects to support management of OSPF3."
|
|
::= { alcatelIND1OSPF3MIBGroups 1 }
|
|
|
|
alaOspf3RouteGroup OBJECT-GROUP
|
|
OBJECTS
|
|
{
|
|
-- Network Route table
|
|
alaOspf3RouteType,
|
|
alaOspf3RoutePathType,
|
|
alaOspf3RouteMetric1,
|
|
alaOspf3RouteMetric2,
|
|
alaOspf3BfdStatus,
|
|
alaOspf3BfdAllInterfaceStatus,
|
|
alaOspf3IfBfdDrsOnly,
|
|
alaOspf3IfBfdStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Collection of objects for management of Network Route."
|
|
::= { alcatelIND1OSPF3MIBGroups 2 }
|
|
|
|
alaOspf3AreaGroup OBJECT-GROUP
|
|
OBJECTS
|
|
{
|
|
-- OSPF3 Area table
|
|
alaOspf3AreaRouterLsaCount,
|
|
alaOspf3AreaNetworkLsaCount,
|
|
alaOspf3AreaIntraAreaPrefixLsaCount,
|
|
alaOspf3AreaInterAreaPrefixLsaCount,
|
|
alaOspf3AreaInterAreaRouterLsaCount,
|
|
alaOspf3AreaHostCount,
|
|
alaOspf3AreaInterfaceCount,
|
|
alaOspf3AreaSummarizationRangeCount
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Collection of objects for management of Router LSAs."
|
|
::= { alcatelIND1OSPF3MIBGroups 3 }
|
|
END
|