mibs/MIBS/nokia/aos7/ALCATEL-IND1-RIPNG-MIB
2023-12-05 12:25:34 +01:00

696 lines
24 KiB
Plaintext

ALCATEL-IND1-RIPNG-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
Counter32, Integer32, TimeTicks
FROM SNMPv2-SMI
Ipv6Address, Ipv6AddressPrefix
FROM IPV6-TC
RowStatus
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
FROM SNMPv2-CONF
routingIND1Ripng
FROM ALCATEL-IND1-BASE;
alcatelIND1RIPNGMIB MODULE-IDENTITY
LAST-UPDATED "201010260000Z"
ORGANIZATION "Alcatel-Lucent"
CONTACT-INFO
" Please consult with Customer Service to ensure the most appropriate
version of this document is used with the products in question:
Alcatel-Lucent, Enterprise Solutions Division
(Formerly Alcatel Internetworking, Incorporated)
26801 West Agoura Road
Agoura Hills, CA 91301-5122
United States Of America
Telephone: North America +1 800 995 2696
Latin America +1 877 919 9526
Europe +31 23 556 0100
Asia +65 394 7933
All Other +1 818 878 4507
Electronic Mail: support@ind.alcatel.com
World Wide Web: http://alcatel-lucent.com/wps/portal/enterprise
File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs"
DESCRIPTION
"This module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
For the Birds Of Prey Product Line
Configuration Of Global RIPNG Configuration Parameters.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 1995-2007 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE"
REVISION "200704030000Z"
DESCRIPTION
"The latest version of this MIB Module."
::= { routingIND1Ripng 1 }
alcatelIND1RIPNGMIBObjects OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch for Routing Information Protocol (RIPNG)
Subsystem Managed Objects."
::= { alcatelIND1RIPNGMIB 1 }
alcatelIND1RIPNGMIBConformance OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch for Routing Information Protocol (RIPNG)
Subsystem Conformance Information."
::= { alcatelIND1RIPNGMIB 2 }
alcatelIND1RIPNGMIBGroups OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch for Routing Information Protocol (RIPNG)
Subsystem Units Of Conformance."
::= { alcatelIND1RIPNGMIBConformance 1 }
alcatelIND1RIPNGMIBCompliances OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch for Routing Information Protocol (RIPNG)
Subsystem Compliance Statements."
::= { alcatelIND1RIPNGMIBConformance 2 }
-- ************************************************************************
-- RIPng Global Protocol Configuration
-- ************************************************************************
alaProtocolRipng OBJECT IDENTIFIER ::= { alcatelIND1RIPNGMIBObjects 1 }
alaRipngProtoStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Global administration status of RIPng."
DEFVAL { disable }
::= { alaProtocolRipng 1 }
alaRipngUpdateInterval OBJECT-TYPE
SYNTAX Integer32 (1 .. 120)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Interval (in seconds) that RIPng routing updates will
be sent out. The value must be less than or equal to
one-third the the invalid timer and greater or equal
to two times the jitter value."
DEFVAL { 30 }
::= { alaProtocolRipng 2 }
alaRipngInvalidTimer OBJECT-TYPE
SYNTAX Integer32 (1 .. 360)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Time in seconds that a route will remain active
in RIB before being moved to the invalid state.
The value must be at least three times the
update interval. The defined range of 1 to 360
allows backwards compatibility with older devices
which do not enforce the three-times constraint.
For newer devices which enforce the three-times
constraint with the update interval, the
minimum allowed value of the invalid timer
is 3."
DEFVAL { 180 }
::= { alaProtocolRipng 3 }
alaRipngHolddownTimer OBJECT-TYPE
SYNTAX Integer32 (0 .. 120)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Time to keep a route in the holddown state."
DEFVAL { 0 }
::= { alaProtocolRipng 4 }
alaRipngGarbageTimer OBJECT-TYPE
SYNTAX Integer32 (0 .. 180)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Time to keep a route before garbage collection."
DEFVAL { 120 }
::= { alaProtocolRipng 5 }
alaRipngRouteCount OBJECT-TYPE
SYNTAX Integer32 (0 .. 2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of network routes in RIPng routing table."
::= { alaProtocolRipng 6 }
alaRipngGlobalRouteTag OBJECT-TYPE
SYNTAX Integer32 (0 .. 65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The route tag that will be added to all RIPng entries"
DEFVAL { 0 }
::= { alaProtocolRipng 7 }
alaRipngTriggeredSends OBJECT-TYPE
SYNTAX INTEGER {
all (1),
onlyupdated (2),
off (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Controls whether trigged updates contain entire RIB
or just changes."
DEFVAL { onlyupdated }
::= { alaProtocolRipng 8 }
alaRipngJitter OBJECT-TYPE
SYNTAX Integer32 (0 .. 60)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Jitter to use when sending updates. The value
must be less than one-half the update interval."
DEFVAL { 5 }
::= { alaProtocolRipng 9 }
alaRipngPort OBJECT-TYPE
SYNTAX Integer32 (1 .. 65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Port to send/receive packets on."
DEFVAL { 3 }
::= { alaProtocolRipng 10 }
-- ************************************************************************
-- RIPng Interface Table
-- ************************************************************************
alaRipngInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaRipngInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"RIPng interfaces."
::= { alaProtocolRipng 11 }
alaRipngInterfaceEntry OBJECT-TYPE
SYNTAX AlaRipngInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each individual interface."
INDEX {
alaRipngInterfaceIndex
}
::= { alaRipngInterfaceTable 1 }
AlaRipngInterfaceEntry ::=
SEQUENCE {
alaRipngInterfaceIndex Integer32,
alaRipngInterfaceStatus RowStatus,
alaRipngInterfaceMetric Integer32,
alaRipngInterfaceRecvStatus INTEGER,
alaRipngInterfaceSendStatus INTEGER,
alaRipngInterfaceHorizon INTEGER,
alaRipngInterfacePacketsSent Integer32,
alaRipngInterfacePacketsRcvd Integer32,
alaRipngInterfaceMTU Counter32,
alaRipngInterfaceNextUpdate TimeTicks
}
alaRipngInterfaceIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IPv6 index of this interface."
::= { alaRipngInterfaceEntry 1 }
alaRipngInterfaceStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Create/delete RIPng interfaces."
DEFVAL { notInService }
::= { alaRipngInterfaceEntry 2 }
alaRipngInterfaceMetric OBJECT-TYPE
SYNTAX Integer32 (1 .. 15)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Metric used on this interface."
DEFVAL { 1 }
::= { alaRipngInterfaceEntry 3 }
alaRipngInterfaceRecvStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Controls whether or not to recv updates on this intf."
DEFVAL { enabled }
::= { alaRipngInterfaceEntry 4 }
alaRipngInterfaceSendStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Controls whether or not to send updates on this intf."
DEFVAL { enabled }
::= { alaRipngInterfaceEntry 5 }
alaRipngInterfaceHorizon OBJECT-TYPE
SYNTAX INTEGER {
none (1),
onlysplit (2),
poison (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Controls use of split horizon on this interface."
DEFVAL { none }
::= { alaRipngInterfaceEntry 6 }
alaRipngInterfacePacketsSent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"# of packets sent on this interface."
::= { alaRipngInterfaceEntry 7 }
alaRipngInterfacePacketsRcvd OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"# of packets received on this interface."
::= { alaRipngInterfaceEntry 8 }
alaRipngInterfaceMTU OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max Transfer size of RIPng packets on this interface"
::= { alaRipngInterfaceEntry 9 }
alaRipngInterfaceNextUpdate OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Seconds remaining for the next update on this interface"
::= { alaRipngInterfaceEntry 10 }
-- ************************************************************************
-- RIPng Peer Table
-- ************************************************************************
alaRipngPeerTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaRipngPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"RIPng peers."
::= { alaProtocolRipng 15 }
alaRipngPeerEntry OBJECT-TYPE
SYNTAX AlaRipngPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each individual peer."
INDEX {
alaRipngPeerAddress,
alaRipngPeerIndex
}
::= { alaRipngPeerTable 1 }
AlaRipngPeerEntry ::=
SEQUENCE {
alaRipngPeerAddress Ipv6Address,
alaRipngPeerIndex Integer32,
alaRipngPeerLastUpdate TimeTicks,
alaRipngPeerNumUpdates Counter32,
alaRipngPeerNumRoutes Counter32,
alaRipngPeerBadPackets Counter32,
alaRipngPeerBadRoutes Counter32
}
alaRipngPeerAddress OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Address of peer."
::= { alaRipngPeerEntry 1 }
alaRipngPeerIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IPv6 index of the interface on which this peer is seen"
::= { alaRipngPeerEntry 2 }
alaRipngPeerLastUpdate OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Last Update received."
::= { alaRipngPeerEntry 3 }
alaRipngPeerNumUpdates OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total # of updates received from this peer."
::= { alaRipngPeerEntry 4 }
alaRipngPeerNumRoutes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total # of routes received from this peer."
::= { alaRipngPeerEntry 5 }
alaRipngPeerBadPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total # of bad packets received."
::= { alaRipngPeerEntry 6 }
alaRipngPeerBadRoutes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total # of bad routes received."
::= { alaRipngPeerEntry 7 }
-- ************************************************************************
-- RIPng Route Table
-- ************************************************************************
alaRipngRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaRipngRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Ripng routing table which contains the routes."
::= { alaProtocolRipng 16 }
alaRipngRouteEntry OBJECT-TYPE
SYNTAX AlaRipngRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Ripng routing table which contains the network routes"
INDEX {
alaRipngRoutePrefix,
alaRipngRoutePrefixLen,
alaRipngRouteNextHop
}
::= { alaRipngRouteTable 1 }
AlaRipngRouteEntry ::=
SEQUENCE {
alaRipngRoutePrefix Ipv6AddressPrefix,
alaRipngRoutePrefixLen Integer32,
alaRipngRouteNextHop Ipv6Address,
alaRipngRouteType INTEGER,
alaRipngRouteAge TimeTicks,
alaRipngRouteTag Integer32,
alaRipngRouteMetric Integer32,
alaRipngRouteStatus INTEGER,
alaRipngRouteFlags INTEGER,
alaRipngRouteIndex Integer32
}
alaRipngRoutePrefix OBJECT-TYPE
SYNTAX Ipv6AddressPrefix
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The destination IP address of this route."
::= { alaRipngRouteEntry 1 }
alaRipngRoutePrefixLen OBJECT-TYPE
SYNTAX Integer32 (0 .. 128)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The prefix length for this route."
::= { alaRipngRouteEntry 2 }
alaRipngRouteNextHop OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The address of the next hop to reach this route."
::= { alaRipngRouteEntry 3 }
alaRipngRouteType OBJECT-TYPE
SYNTAX INTEGER {
local (1),
rip (2),
redist (3),
unknown (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of route."
::= { alaRipngRouteEntry 4 }
alaRipngRouteAge OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of seconds since this route was last
updated or otherwise determined to be correct."
::= { alaRipngRouteEntry 5 }
alaRipngRouteTag OBJECT-TYPE
SYNTAX Integer32 ( 0 .. 2147483647 )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The associated route tag"
::= { alaRipngRouteEntry 6 }
alaRipngRouteMetric OBJECT-TYPE
SYNTAX Integer32 ( 0 .. 15 )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The routing metric for this route."
::= { alaRipngRouteEntry 7 }
alaRipngRouteStatus OBJECT-TYPE
SYNTAX INTEGER {
inactive (0),
active (1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the route has been installed
into the IP Route Manager's fib."
::= { alaRipngRouteEntry 8 }
alaRipngRouteFlags OBJECT-TYPE
SYNTAX INTEGER {
active (1),
garbage (2),
holddown (3),
unknown (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The assocated flags for this route."
::= { alaRipngRouteEntry 9 }
alaRipngRouteIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IPv6 index of the interface on which the route gateway
can be reached"
::= { alaRipngRouteEntry 10 }
-- ******************************************************************** --
--
-- Compliance Statements
--
alcatelIND1RIPMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Compliance statement for RIPng subsystem."
MODULE -- this module
MANDATORY-GROUPS {
alaRipngGlobalGroup,
alaRipngInterfaceGroup,
alaRipngPeerGroup,
alaRipngRouteGroup
}
::= { alcatelIND1RIPNGMIBCompliances 1 }
--
-- Units of Conformance
--
alaRipngGlobalGroup OBJECT-GROUP
OBJECTS {
alaRipngProtoStatus,
alaRipngUpdateInterval,
alaRipngInvalidTimer,
alaRipngHolddownTimer,
alaRipngGarbageTimer,
alaRipngRouteCount,
alaRipngGlobalRouteTag,
alaRipngTriggeredSends,
alaRipngJitter,
alaRipngPort
}
STATUS current
DESCRIPTION
"Collection of Miscellaneous objects for management of RIP."
::= { alcatelIND1RIPNGMIBGroups 1 }
alaRipngInterfaceGroup OBJECT-GROUP
OBJECTS {
alaRipngInterfaceStatus,
alaRipngInterfaceMetric,
alaRipngInterfaceRecvStatus,
alaRipngInterfaceSendStatus,
alaRipngInterfaceHorizon,
alaRipngInterfacePacketsSent,
alaRipngInterfacePacketsRcvd,
alaRipngInterfaceMTU,
alaRipngInterfaceNextUpdate
}
STATUS current
DESCRIPTION
"Collection of Miscellaneous objects for management of RIP."
::= { alcatelIND1RIPNGMIBGroups 3 }
alaRipngPeerGroup OBJECT-GROUP
OBJECTS {
alaRipngPeerLastUpdate,
alaRipngPeerNumUpdates,
alaRipngPeerNumRoutes,
alaRipngPeerBadPackets,
alaRipngPeerBadRoutes
}
STATUS current
DESCRIPTION
"Collection of Miscellaneous objects for management of RIP."
::= { alcatelIND1RIPNGMIBGroups 7 }
alaRipngRouteGroup OBJECT-GROUP
OBJECTS {
alaRipngRouteType,
alaRipngRouteAge,
alaRipngRouteTag,
alaRipngRouteMetric,
alaRipngRouteStatus,
alaRipngRouteFlags,
alaRipngRouteIndex
}
STATUS current
DESCRIPTION
"Collection of Miscellaneous objects for management of RIP."
::= { alcatelIND1RIPNGMIBGroups 8 }
--
-- Traps
--
alcatelIND1RIPNGTraps OBJECT IDENTIFIER ::= { alcatelIND1RIPNGMIB 3}
alcatelIND1RIPNGTrapsRoot OBJECT IDENTIFIER ::= { alcatelIND1RIPNGTraps 0}
ripngRouteMaxLimitReached NOTIFICATION-TYPE
STATUS current
DESCRIPTION
" This notification is generated as RIPng database reached supported maximum entries.
RIPng will discard any new updates."
::= {alcatelIND1RIPNGTrapsRoot 1}
alcatelIND1RIPNGTrapsGroup NOTIFICATION-GROUP
NOTIFICATIONS {
ripngRouteMaxLimitReached
}
STATUS current
DESCRIPTION
"Collection of RIPNG Trap Objects."
::= { alcatelIND1RIPNGMIBGroups 9 }
END