david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
98a672123c
mibs/MIBS/nokia/aos7/ALCATEL-IND1-SAA-MIB
David Leutgeb 98a672123c Initial commit
2023-12-05 12:25:34 +01:00

2908 lines
97 KiB
Plaintext
Raw Blame History

ALCATEL-IND1-SAA-MIB DEFINITIONS ::= BEGIN
IMPORTS
OBJECT-TYPE, MODULE-IDENTITY, OBJECT-IDENTITY,
NOTIFICATION-TYPE, Integer32, Unsigned32,
Counter32
FROM SNMPv2-SMI
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
OBJECT-GROUP,MODULE-COMPLIANCE,
NOTIFICATION-GROUP
FROM SNMPv2-CONF
DateAndTime, DisplayString, TruthValue,
RowStatus, MacAddress FROM SNMPv2-TC
InetAddressType, InetAddress FROM INET-ADDRESS-MIB
softentIND1Saa FROM ALCATEL-IND1-BASE
Dot1agCfmMaintDomainName,
Dot1agCfmMaintAssocName FROM IEEE8021-CFM-MIB;
alcatelIND1SaaMIB MODULE-IDENTITY
LAST-UPDATED "200907210000Z" -- 07/21/2009 00:00GMT
ORGANIZATION "Alcatel - Architects Of An Internet World"
CONTACT-INFO
"Please consult with Customer Service to insure the most appropriate
version of this document is used with the products in question:
Alcatel Internetworking, Incorporated
(Division 1, Formerly XYLAN Corporation)
26801 West Agoura Road
Agoura Hills, CA 91301-5122
United States Of America
Telephone: North America +1 800 995 2696
Latin America +1 877 919 9526
Europe +31 23 556 0100
Asia +65 394 7933
All Other +1 818 878 4507
Electronic Mail: support@ind.alcatel.com
World Wide Web: http://www.ind.alcatel.com
File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs"
DESCRIPTION
"This module describes an authoritative enterprise-
specific Simple Network Management Protocol (SNMP) Management
Information Base (MIB):
For the Birds Of Prey Product Line
Service Assurance agent.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect,
special, or consequential damages whatsoever arising from or
related to this document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 1995-2002 Alcatel Internetworking, Incorporated
ALL RIGHTS RESERVED WORLDWIDE"
REVISION "200907210000Z"
DESCRIPTION
"The mib for SAA module"
::= { softentIND1Saa 1}
-- --------------------------------------------------------------
--
-- Sections of the Saa MIB
-- --------------------------------------------------------------
alcatelIND1SaaNotifications OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch for Saa Notifications."
::= { alcatelIND1SaaMIB 0 }
alcatelIND1SaaMIBObjects OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For Saa Objects."
::= { alcatelIND1SaaMIB 1 }
alcatelIND1SaaMIBConformance OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch for Saa Module MIB Subsystem Conformance Information."
::= { alcatelIND1SaaMIB 2 }
alcatelIND1SaaMIBGroups OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch for Saa Module MIB Subsystem Units of Conformance."
::= { alcatelIND1SaaMIBConformance 1 }
alcatelIND1SaaMIBCompliances OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch for Saa Module MIB Subsystem Compliance Statements."
::= { alcatelIND1SaaMIBConformance 2 }
-- --------------------------------------------------------------
-- DESCRIPTION:
-- "control table data for the Saa Module.
-- "
-- --------------------------------------------------------------
alaSaaCtrlConfig OBJECT IDENTIFIER ::= { alcatelIND1SaaMIBObjects 1 }
alaSaaCtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaSaaCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines the SAA control table for providing, via SNMP, the
capability of performing SAA test operations.
"
::= { alaSaaCtrlConfig 1 }
alaSaaCtrlEntry OBJECT-TYPE
SYNTAX AlaSaaCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the alaSaaCtrlTable table, containing information on
the Saa function for a single instance of the Saa.
"
INDEX {
alaSaaCtrlOwnerIndex,
alaSaaCtrlTestIndex
}
::= { alaSaaCtrlTable 1 }
AlaSaaCtrlEntry ::=
SEQUENCE {
alaSaaCtrlOwnerIndex SnmpAdminString,
alaSaaCtrlTestIndex SnmpAdminString,
alaSaaCtrlRowStatus RowStatus,
alaSaaCtrlDescr DisplayString,
alaSaaCtrlAdminStatus INTEGER,
alaSaaCtrlTestMode INTEGER,
alaSaaCtrlRuns Counter32,
alaSaaCtrlFailures Counter32,
alaSaaCtrlLastRunResult INTEGER,
alaSaaCtrlLastRunTime DateAndTime,
alaSaaCtrlInterval Integer32,
alaSaaCtrlStartAt DateAndTime,
alaSaaCtrlStopAt DateAndTime,
alaSaaCtrlMaxHistoryRows Integer32,
alaSaaCtrlJitterThreshold Integer32,
alaSaaCtrlRTTThreshold Integer32
}
alaSaaCtrlOwnerIndex OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Owner name to identify the responsiblity of the entries
in the table."
DEFVAL { "USER" }
::= { alaSaaCtrlEntry 1 }
alaSaaCtrlTestIndex OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Unique name to identify the entries in the table.
The name is unique across various SNMP users.
"
::= { alaSaaCtrlEntry 2 }
alaSaaCtrlRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object allows entries to be created and deleted in the table.
"
::= { alaSaaCtrlEntry 3 }
alaSaaCtrlDescr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"User provided description string for the SAA.
"
DEFVAL { "DEFAULT" }
::= { alaSaaCtrlEntry 4 }
alaSaaCtrlAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
start(0),
stop(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates wether to start or stop the SAA test.
"
::= { alaSaaCtrlEntry 5 }
alaSaaCtrlTestMode OBJECT-TYPE
SYNTAX INTEGER {
undefined(0),
ipSaa(1),
ethSaa(2),
macSaa(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of SAA test to be performed. The undefined value corresponds to the case
when an entry is created in the alaSaaCtrlTable table without specifying a value for
this object. This value shall be updated when the user creates an entry for the
corresponding saa in the alaSaaIpCtrlTable table, alaSaaEthoamCtrlTable table or
alaSaaMacCtrlTable table.
"
DEFVAL { undefined }
::= { alaSaaCtrlEntry 6 }
alaSaaCtrlRuns OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates number of times SAA test has been executed.
"
::= { alaSaaCtrlEntry 7 }
alaSaaCtrlFailures OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of times this SAA test has failed.
"
::= { alaSaaCtrlEntry 8 }
alaSaaCtrlLastRunResult OBJECT-TYPE
SYNTAX INTEGER {
undetermined(0),
success(1),
failed(2),
aborted(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The result of the latest SAA test iteration.
"
::= { alaSaaCtrlEntry 9 }
alaSaaCtrlLastRunTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time at which the last iteration of the SAA was run.
"
::= { alaSaaCtrlEntry 10 }
alaSaaCtrlInterval OBJECT-TYPE
SYNTAX Integer32 (1..1500)
UNITS "minutes"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Interval, in minutes, between two iterations of the SAA test.
Valid values are 1, 2, 5 and 10-1500."
DEFVAL { 150 }
::= { alaSaaCtrlEntry 11 }
alaSaaCtrlStartAt OBJECT-TYPE
SYNTAX DateAndTime (SIZE(8))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the time at which the SAA test
is to be started. The deci-seconds specified in DateAndTime
has no significance in scheduling SAA. The year in DateAndTime
must be in the range from 1970 to 2037.
"
::= { alaSaaCtrlEntry 12 }
alaSaaCtrlStopAt OBJECT-TYPE
SYNTAX DateAndTime (SIZE(8))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the time at which the SAA test
is to be stopped.Special value for DataAndTime which is
9999-12-31,23:59:59.0 is used to reset the existing configured
value of this object, indicating that the SAA test should never stop.
The deci-seconds in the DateAndTime has no significance in scheduling
SAA.The year in DateAndTime must be in the range from 1970 to 2037.
"
::= { alaSaaCtrlEntry 13 }
alaSaaCtrlMaxHistoryRows OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the maximum number of iterations for which
history data is maintained.
"
DEFVAL { 5 }
::= { alaSaaCtrlEntry 14 }
alaSaaCtrlJitterThreshold OBJECT-TYPE
SYNTAX Integer32 (0..1000000)
UNITS "micro-seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Trap is generated when the Jitter Threshold is crossed.
0 indicates it is diabled."
DEFVAL { 0 }
::= { alaSaaCtrlEntry 15 }
alaSaaCtrlRTTThreshold OBJECT-TYPE
SYNTAX Integer32 (0..1000000)
UNITS "micro-seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Trap is generated when the RTT Threshold is crossed.
0 indicates it is diabled."
DEFVAL { 0 }
::= { alaSaaCtrlEntry 16 }
-- ***************************************************************
-- DESCRIPTION:
-- "control table data for the Ip-Saa.
-- "
-- ***************************************************************
alaSaaIpCtrlConfig OBJECT IDENTIFIER ::= { alcatelIND1SaaMIBObjects 2 }
alaSaaIpCtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaSaaIpCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"It defines the ping Control Table for providing the ping capability
via SNMP. The results of these tests are stored in the alaSaaIpResultsTable
and alaSaaIpHistoryTable.
"
::= { alaSaaIpCtrlConfig 1 }
alaSaaIpCtrlEntry OBJECT-TYPE
SYNTAX AlaSaaIpCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry for the alaSaaIpCtrl table.
"
INDEX {
alaSaaIpCtrlOwnerIndex,
alaSaaIpCtrlTestIndex
}
::= { alaSaaIpCtrlTable 1 }
AlaSaaIpCtrlEntry ::=
SEQUENCE {
alaSaaIpCtrlOwnerIndex SnmpAdminString,
alaSaaIpCtrlTestIndex SnmpAdminString,
alaSaaIpCtrlRowStatus RowStatus,
alaSaaIpCtrlTestMode INTEGER,
alaSaaIpCtrlTgtAddrType InetAddressType,
alaSaaIpCtrlTgtAddress InetAddress,
alaSaaIpCtrlSrcAddrType InetAddressType,
alaSaaIpCtrlSrcAddress InetAddress,
alaSaaIpCtrlPayloadSize Integer32,
alaSaaIpCtrlNumPkts Integer32,
alaSaaIpCtrlInterPktDelay Integer32,
alaSaaIpCtrlTypeOfService Integer32,
alaSaaIpCtrlVRFId Integer32,
alaSaaIpCtrlTotalPktsSent Counter32,
alaSaaIpCtrlTotalPktsRcvd Counter32,
alaSaaIpCtrlMinRTT Integer32,
alaSaaIpCtrlAvgRTT Integer32,
alaSaaIpCtrlMaxRTT Integer32,
alaSaaIpCtrlMinJitter Integer32,
alaSaaIpCtrlAvgJitter Integer32,
alaSaaIpCtrlMaxJitter Integer32,
alaSaaIpCtrlTSMinRTT DateAndTime,
alaSaaIpCtrlTSMaxRTT DateAndTime,
alaSaaIpCtrlTSMinJitter DateAndTime,
alaSaaIpCtrlTSMaxJitter DateAndTime
}
alaSaaIpCtrlOwnerIndex OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Owner name to identify the responsiblity of the entries
in the table."
DEFVAL { "USER" }
::= { alaSaaIpCtrlEntry 1 }
alaSaaIpCtrlTestIndex OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Unique name to identify the entries in the table.
This name is unique across various SNMP users.
"
::= { alaSaaIpCtrlEntry 2 }
alaSaaIpCtrlRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Allows entries to be created and deleted in the table.
createAndWait value is not supported for this object.
"
::= { alaSaaIpCtrlEntry 3 }
alaSaaIpCtrlTestMode OBJECT-TYPE
SYNTAX INTEGER {
icmpEcho(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the type of ping test defined by this entry.
"
::= { alaSaaIpCtrlEntry 4 }
alaSaaIpCtrlTgtAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the InetAddress type of host address to be used as the destination
for performing a ping operation. InetAddressIPv4(1) is the only type currently
supported.
"
DEFVAL { ipv4 }
::= { alaSaaIpCtrlEntry 5 }
alaSaaIpCtrlTgtAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the IP host address to be used as the destination for
performing a ping operation.
"
::= { alaSaaIpCtrlEntry 6 }
alaSaaIpCtrlSrcAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the InetAddress type of host address to be used as the source for
performing a ping operation. InetAddressIPv4(1) is the only type currently
supported.
"
DEFVAL { ipv4 }
::= { alaSaaIpCtrlEntry 7 }
alaSaaIpCtrlSrcAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the IP host address to be used as the source for performing
a ping operation. The default value of this object is 0.0.0.0 if
alaSaaIpCtrlSrcAddrType is set to ipv4.
"
::= { alaSaaIpCtrlEntry 8 }
alaSaaIpCtrlPayloadSize OBJECT-TYPE
SYNTAX Integer32 (24..1472)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the size of the ICMP payload to be used for the ping operation.
"
DEFVAL { 24 }
::= { alaSaaIpCtrlEntry 9 }
alaSaaIpCtrlNumPkts OBJECT-TYPE
SYNTAX Integer32 (1..100)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the number of packets to be sent in one ping iteration.Configuration of number of packets and inter packet delay should be such that total execution time remains less then 10s.
"
DEFVAL { 5 }
::= { alaSaaIpCtrlEntry 10 }
alaSaaIpCtrlInterPktDelay OBJECT-TYPE
SYNTAX Integer32 (100..1000)
UNITS "milli-seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the delay between two consecutive packets transmitted
during a ping iteration.The value specified should be a multiple
of 100.
"
DEFVAL { 1000 }
::= { alaSaaIpCtrlEntry 11 }
alaSaaIpCtrlTypeOfService OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the type of service
"
DEFVAL { 0 }
::= { alaSaaIpCtrlEntry 12 }
alaSaaIpCtrlVRFId OBJECT-TYPE
SYNTAX Integer32 (0..4096)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the VRF ID. Only the value '0' is
currently supported.
"
::= { alaSaaIpCtrlEntry 13 }
alaSaaIpCtrlTotalPktsSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the total number of packets sent during all the ping iterations.
"
::= { alaSaaIpCtrlEntry 14 }
alaSaaIpCtrlTotalPktsRcvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the total number of packets received during all the ping iterations.
"
::= { alaSaaIpCtrlEntry 15 }
alaSaaIpCtrlMinRTT OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the minimum round trip time among all the iterations of the SAA.
"
::= { alaSaaIpCtrlEntry 16 }
alaSaaIpCtrlAvgRTT OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the average round trip time of all the iterations of the SAA.
"
::= { alaSaaIpCtrlEntry 17 }
alaSaaIpCtrlMaxRTT OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the maximum round trip time among all the iterations of the SAA.
"
::= { alaSaaIpCtrlEntry 18 }
alaSaaIpCtrlMinJitter OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the minimum jitter among all the iterations of the SAA.
"
::= { alaSaaIpCtrlEntry 19 }
alaSaaIpCtrlAvgJitter OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the average jitter of all the iterations of the SAA.
"
::= { alaSaaIpCtrlEntry 20 }
alaSaaIpCtrlMaxJitter OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the maximum jitter among all the iterations of the SAA.
"
::= { alaSaaIpCtrlEntry 21 }
alaSaaIpCtrlTSMinRTT OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the timestamp of the iteration that gave the minimum
packet delay.
"
::= { alaSaaIpCtrlEntry 22 }
alaSaaIpCtrlTSMaxRTT OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the timestamp of the iteration that gave the maximum
packet delay.
"
::= { alaSaaIpCtrlEntry 23 }
alaSaaIpCtrlTSMinJitter OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the timestamp of the iteration that gave the minimum
packet jitter.
"
::= { alaSaaIpCtrlEntry 24 }
alaSaaIpCtrlTSMaxJitter OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the timestamp of the iteration that gave the maximum
packet jitter.
"
::= { alaSaaIpCtrlEntry 25 }
-- ***************************************************************
-- DESCRIPTION:
-- "Results table data for the Ip-Saa.
-- "
-- ***************************************************************
alaSaaIpResults OBJECT IDENTIFIER ::= { alcatelIND1SaaMIBObjects 3 }
alaSaaIpResultsTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaSaaIpResultsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines the IP Results Table for providing
the capability of performing IP Ping operations. The
results of these operations are stored in the
alaSaaIpResultsTable and the alaSaaIpHistoryTable.
An entry is removed from the alaSaaIpResultsTable when
its corresponding alaSaaCtrlEntry is deleted.
"
::= { alaSaaIpResults 1 }
alaSaaIpResultsEntry OBJECT-TYPE
SYNTAX AlaSaaIpResultsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry for the alaSaaResults table.
An entry in this table summarizes results from multiple
invocations of the test configured by the corresponding
entry in alaSaaIpCtrlTable.
"
INDEX {
alaSaaIpCtrlOwnerIndex,
alaSaaIpCtrlTestIndex,
alaSaaIpResultsTestRunIndex
}
::= { alaSaaIpResultsTable 1 }
AlaSaaIpResultsEntry ::=
SEQUENCE {
alaSaaIpResultsTestRunIndex Unsigned32,
alaSaaIpResultsPktsSent Counter32,
alaSaaIpResultsPktsRcvd Counter32,
alaSaaIpResultsInterPktDelay Integer32,
alaSaaIpResultsRunResult INTEGER,
alaSaaIpResultsRunResultReason OCTET STRING,
alaSaaIpResultsRunTime DateAndTime,
alaSaaIpResultsMinRTT Integer32,
alaSaaIpResultsAvgRTT Integer32,
alaSaaIpResultsMaxRTT Integer32,
alaSaaIpResultsMinJitter Integer32,
alaSaaIpResultsAvgJitter Integer32,
alaSaaIpResultsMaxJitter Integer32
}
alaSaaIpResultsTestRunIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of alaSaaIpResultsTestRunIndex identifies the
row entry that reports results for a single OAM test run.
The value of this object starts from 1 and can go upto a
maximum of alaSaaCtrlMaxHistoryRows.
"
::= { alaSaaIpResultsEntry 1 }
alaSaaIpResultsPktsSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the number of packets sent during a single ping iteration.
"
::= { alaSaaIpResultsEntry 2 }
alaSaaIpResultsPktsRcvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the number of packets received during a single ping iteration.
"
::= { alaSaaIpResultsEntry 3 }
alaSaaIpResultsInterPktDelay OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the inter-packet-delay with which the packets were sent
in the iteration.
"
::= { alaSaaIpResultsEntry 4 }
alaSaaIpResultsRunResult OBJECT-TYPE
SYNTAX INTEGER {
undetermined(0),
success(1),
failed(2),
aborted(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The result of the iteration.
"
::= { alaSaaIpResultsEntry 5 }
alaSaaIpResultsRunResultReason OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the iteration fails, this field indicates the reason
for failure. If the reason for failure cannot be determined
the value of this field is the string Unknown.
For successful iterations, the value of this field is the
string 'Iteration successful'.
"
::= { alaSaaIpResultsEntry 6 }
alaSaaIpResultsRunTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The date and time at which the iteraton was run.
"
::= { alaSaaIpResultsEntry 7 }
alaSaaIpResultsMinRTT OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum round trip time.
"
::= { alaSaaIpResultsEntry 8 }
alaSaaIpResultsAvgRTT OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average round trip time.
"
::= { alaSaaIpResultsEntry 9 }
alaSaaIpResultsMaxRTT OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum round trip time.
"
::= { alaSaaIpResultsEntry 10 }
alaSaaIpResultsMinJitter OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minumum jitter value.
"
::= { alaSaaIpResultsEntry 11 }
alaSaaIpResultsAvgJitter OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average jitter value.
"
::= { alaSaaIpResultsEntry 12 }
alaSaaIpResultsMaxJitter OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum jitter value
"
::= { alaSaaIpResultsEntry 13 }
-- ***************************************************************
-- DESCRIPTION:
-- "Data for the stats history"
-- ***************************************************************
alaSaaIpHistory OBJECT IDENTIFIER ::= { alcatelIND1SaaMIBObjects 4 }
alaSaaIpHistoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaSaaIpHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"It is the table for storing the results of a ping operation. An entry
in this table is created when a ping operation is performed. Entries
are removed from this table when its corresponding alaSaaCtrlEntry is
deleted.
"
::= { alaSaaIpHistory 1 }
alaSaaIpHistoryEntry OBJECT-TYPE
SYNTAX AlaSaaIpHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of the alaSaaIpHistory table.
"
INDEX {
alaSaaIpCtrlOwnerIndex,
alaSaaIpCtrlTestIndex,
alaSaaIpResultsTestRunIndex,
alaSaaIpHistoryIndex
}
::= { alaSaaIpHistoryTable 1 }
AlaSaaIpHistoryEntry ::=
SEQUENCE {
alaSaaIpHistoryIndex Unsigned32,
alaSaaIpHistoryPktRTT Integer32,
alaSaaIpHistoryPktJitter Integer32
}
alaSaaIpHistoryIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table is created when the result of
a ping iteration is determined. The initial 2 instance
identifier index values identify the alaSaaIpPingCtrlEntry
that a ping iteration result (alaSaaIpHistoryEntry) belongs
to. The alaSaaIpHistoryIndex element selects a single ping
iteration result.
The value of this object starts from 1 and can go up to 20,history of first 20 packets will be stored.
"
::= { alaSaaIpHistoryEntry 1 }
alaSaaIpHistoryPktRTT OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The round trip time taken by a single packet in an iteration.
"
::= { alaSaaIpHistoryEntry 2 }
alaSaaIpHistoryPktJitter OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The jitter value for a single packet in an iteration.
"
::= { alaSaaIpHistoryEntry 3 }
-- ***************************************************************
-- DESCRIPTION:
-- "control table data for the Eth-Saa.
-- "
-- ***************************************************************
alaSaaEthoamCtrlConfig OBJECT IDENTIFIER ::= { alcatelIND1SaaMIBObjects 5 }
alaSaaEthoamCtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaSaaEthoamCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines the table for providing, via SNMP, the capability of
performing Ethernet Loopback and DMM test operations. The results
of these tests are stored in the alaSaaEthoamResultsTable and
the alaSaaEthoamHistoryTable."
::= { alaSaaEthoamCtrlConfig 1 }
alaSaaEthoamCtrlEntry OBJECT-TYPE
SYNTAX AlaSaaEthoamCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines an entry in the alaSaaEthoamCtrlTable.
"
INDEX {
alaSaaEthoamCtrlOwnerIndex,
alaSaaEthoamCtrlTestIndex
}
::= { alaSaaEthoamCtrlTable 1 }
AlaSaaEthoamCtrlEntry ::=
SEQUENCE {
alaSaaEthoamCtrlOwnerIndex SnmpAdminString,
alaSaaEthoamCtrlTestIndex SnmpAdminString,
alaSaaEthoamCtrlRowStatus RowStatus,
alaSaaEthoamCtrlTestMode INTEGER,
alaSaaEthoamCtrlTgtMepId Integer32,
alaSaaEthoamCtrlTgtMAC MacAddress,
alaSaaEthoamCtrlSrcMepId Integer32,
alaSaaEthoamCtrlDomainName Dot1agCfmMaintDomainName,
alaSaaEthoamCtrlAssociationName Dot1agCfmMaintAssocName,
alaSaaEthoamCtrlPktTimeOut Integer32,
alaSaaEthoamCtrlNumPkts Integer32,
alaSaaEthoamCtrlInterPktDelay Integer32,
alaSaaEthoamCtrlPktData OCTET STRING,
alaSaaEthoamCtrlVlanPriority Integer32,
alaSaaEthoamCtrlDropEligible TruthValue,
alaSaaEthoamCtrlTotalPktsRcvd Unsigned32,
alaSaaEthoamCtrlTotalPktsSent Unsigned32,
alaSaaEthoamCtrlMinRTT Integer32,
alaSaaEthoamCtrlAvgRTT Integer32,
alaSaaEthoamCtrlMaxRTT Integer32,
alaSaaEthoamCtrlMinJitter Integer32,
alaSaaEthoamCtrlAvgJitter Integer32,
alaSaaEthoamCtrlMaxJitter Integer32,
alaSaaEthoamCtrlTSMinRTT DateAndTime,
alaSaaEthoamCtrlTSMaxRTT DateAndTime,
alaSaaEthoamCtrlTSMinJitter DateAndTime,
alaSaaEthoamCtrlTSMaxJitter DateAndTime
}
alaSaaEthoamCtrlOwnerIndex OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Owner name to identify the responsiblity of the entries
in the table."
DEFVAL { "USER" }
::= { alaSaaEthoamCtrlEntry 1 }
alaSaaEthoamCtrlTestIndex OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Unique name to identify the entries in the table.
This name is unique across various SNMP users.
"
::= { alaSaaEthoamCtrlEntry 2 }
alaSaaEthoamCtrlRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object allows entries to be created and deleted
in the alaSaaEthoamCtrlTable. Deletion of an entry in this
table results in all corresponding (same
alaSaaEthoamCtrlOwnerIndex and alaSaaEthoamCtrlTestIndex index
values) alaSaaEthoamResultsTable and alaSaaEthoamHistoryTable
entries being deleted."
::= { alaSaaEthoamCtrlEntry 3 }
alaSaaEthoamCtrlTestMode OBJECT-TYPE
SYNTAX INTEGER {
ethernetLoopback (1),
ethernetDmm (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the type of Ethernet OAM test defined by this entry.
ethernetLoopback - tests connectivity and round trip time by
sending loopback requests.
ethernetDmm - tests connectivity and round trip time by sending
timestamped packets.
"
::= { alaSaaEthoamCtrlEntry 4 }
alaSaaEthoamCtrlTgtMepId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Mep-Id of the destination to which the Ethernet Loopback or
DMM message is to be sent. Either alaSaaEthoamCtrlTgtMepId or
alaSaaEthoamCtrlTgtMAC should be specified while configuring
an alaSaaEthoamCtrlEntry.
"
::= { alaSaaEthoamCtrlEntry 5 }
alaSaaEthoamCtrlTgtMAC OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Target MAC Address of the destination to which the Ethernet
Loopback or DMM message is to be sent: A unicast
destination MAC address. Either alaSaaEthoamCtrlTgtMepId or
alaSaaEthoamCtrlTgtMAC should be specified while configuring
an alaSaaEthoamCtrlEntry.
"
::= { alaSaaEthoamCtrlEntry 6 }
alaSaaEthoamCtrlSrcMepId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Mep-Id of the source node initiating the Ethernet Loopback or
DMM message."
::= { alaSaaEthoamCtrlEntry 7 }
alaSaaEthoamCtrlDomainName OBJECT-TYPE
SYNTAX Dot1agCfmMaintDomainName
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The name of the domain to which the source Mep belongs.
"
::= { alaSaaEthoamCtrlEntry 8 }
alaSaaEthoamCtrlAssociationName OBJECT-TYPE
SYNTAX Dot1agCfmMaintAssocName
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The name of the association in the domain (specified by
alaSaaEthoamCtrlDomainName) to which the source Mep belongs.
"
::= { alaSaaEthoamCtrlEntry 9 }
alaSaaEthoamCtrlPktTimeOut OBJECT-TYPE
SYNTAX Integer32
UNITS "milli-seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum time to wait for the reply of the transmitted packet.
"
::= { alaSaaEthoamCtrlEntry 10 }
alaSaaEthoamCtrlNumPkts OBJECT-TYPE
SYNTAX Integer32 (1..100)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number of packets to be sent in one iteration of Eth-LB/DMM test.Configuration of number of packets and inter packet delay should be such that total execution time remains less then 10s.
"
::= { alaSaaEthoamCtrlEntry 11 }
alaSaaEthoamCtrlInterPktDelay OBJECT-TYPE
SYNTAX Integer32 (100..1000)
UNITS "milli-seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the delay between two consecutive packets transmitted
during an iteration. The value specified should be a
multiple of 100.
"
::= { alaSaaEthoamCtrlEntry 12 }
alaSaaEthoamCtrlPktData OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..255))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"An arbitrary amount of data to be included in the Data TLV,
if the Data TLV is selected to be sent."
::= { alaSaaEthoamCtrlEntry 13 }
alaSaaEthoamCtrlVlanPriority OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Priority. 3 bit value to be used in the VLAN tag, if present
in the transmitted frame.
"
::= { alaSaaEthoamCtrlEntry 14 }
alaSaaEthoamCtrlDropEligible OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Drop Enable bit value to be used in the VLAN tag, if present
in the transmitted frame."
DEFVAL { false }
::= { alaSaaEthoamCtrlEntry 15 }
alaSaaEthoamCtrlTotalPktsRcvd OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the total number of packets received during all the Eth-LB/DMM
iterations."
::= { alaSaaEthoamCtrlEntry 16 }
alaSaaEthoamCtrlTotalPktsSent OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the total number of packets sent during all the Eth-LB/DMM
iterations."
::= { alaSaaEthoamCtrlEntry 17 }
alaSaaEthoamCtrlMinRTT OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the minimum round trip time among all the iterations of the SAA.
"
::= { alaSaaEthoamCtrlEntry 18 }
alaSaaEthoamCtrlAvgRTT OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the average round trip time of all the iterations of the SAA.
"
::= { alaSaaEthoamCtrlEntry 19 }
alaSaaEthoamCtrlMaxRTT OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the maximum round trip time among all the iterations of the SAA.
"
::= { alaSaaEthoamCtrlEntry 20 }
alaSaaEthoamCtrlMinJitter OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the minimum jitter among all the iterations of the SAA.
"
::= { alaSaaEthoamCtrlEntry 21 }
alaSaaEthoamCtrlAvgJitter OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the average jitter of all the iterations of the SAA.
"
::= { alaSaaEthoamCtrlEntry 22 }
alaSaaEthoamCtrlMaxJitter OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the maximum jitter among all the iterations of the SAA.
"
::= { alaSaaEthoamCtrlEntry 23 }
alaSaaEthoamCtrlTSMinRTT OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The timestamp of the iteration that gave the minimum
packet delay."
::= { alaSaaEthoamCtrlEntry 24 }
alaSaaEthoamCtrlTSMaxRTT OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The timestamp of the iteration that gave the maximum
packet delay."
::= { alaSaaEthoamCtrlEntry 25 }
alaSaaEthoamCtrlTSMinJitter OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The timestamp of the iteration that gave the minimum
packet jitter."
::= { alaSaaEthoamCtrlEntry 26 }
alaSaaEthoamCtrlTSMaxJitter OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The timestamp of the iteration that gave the maximum
packet jitter."
::= { alaSaaEthoamCtrlEntry 27 }
-- ***************************************************************
-- DESCRIPTION:
-- "Results table data for the Eth-Saa.
-- "
-- ***************************************************************
alaSaaEthoamResults OBJECT IDENTIFIER ::= { alcatelIND1SaaMIBObjects 6 }
alaSaaEthoamResultsTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaSaaEthoamResultsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines the Ethoam Results Table for providing
the capability of performing Eth-LB/DMM operations. The
results of these operations are stored in the
alaSaaEthoamResultsTable and the alaSaaEthoamHistoryTable.
An entry is removed from the alaSaaEthoamResultsTable when
its corresponding alaSaaCtrlEntry is deleted."
::= { alaSaaEthoamResults 1 }
alaSaaEthoamResultsEntry OBJECT-TYPE
SYNTAX AlaSaaEthoamResultsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines an entry in the alaSaaEthoamResultsTable. The
alaSaaEthoamResultsTable has the same indexing as the
alaSaaEthoamCtrlTable in order for a alaSaaEthoamResultsEntry to
correspond to the alaSaaEthoamCtrlEntry that caused it to
be created.
An entry in this table summarizes results from multiple
invocations of the test configured by the corresponding
entry in alaSaaEthoamCtrlTable."
INDEX {
alaSaaEthoamCtrlOwnerIndex,
alaSaaEthoamCtrlTestIndex,
alaSaaEthoamResultsTestRunIndex
}
::= { alaSaaEthoamResultsTable 1 }
AlaSaaEthoamResultsEntry ::=
SEQUENCE {
alaSaaEthoamResultsTestRunIndex Unsigned32,
alaSaaEthoamResultsPktsSent Unsigned32,
alaSaaEthoamResultsPktsRcvd Unsigned32,
alaSaaEthoamResultsInterPktDelay Integer32,
alaSaaEthoamResultsRunResult INTEGER,
alaSaaEthoamResultsRunResultReason OCTET STRING,
alaSaaEthoamResultsRunTime DateAndTime,
alaSaaEthoamResultsMinRTT Integer32,
alaSaaEthoamResultsAvgRTT Integer32,
alaSaaEthoamResultsMaxRTT Integer32,
alaSaaEthoamResultsMinJitter Integer32,
alaSaaEthoamResultsAvgJitter Integer32,
alaSaaEthoamResultsMaxJitter Integer32
}
alaSaaEthoamResultsTestRunIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of alaSaaEthoamResultsTestRunIndex identifies the
row entry that reports results for a single Eth-LB/DMM test run.
The value of this object starts from 1 and can go upto a
maximum of alaSaaCtrlMaxHistoryRows."
::= { alaSaaEthoamResultsEntry 1 }
alaSaaEthoamResultsPktsSent OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the number of packets sent during a single Eth-LB/DMM
iteration."
::= { alaSaaEthoamResultsEntry 2 }
alaSaaEthoamResultsPktsRcvd OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the number of packets received during a single Eth-LB/DMM
iteration"
::= { alaSaaEthoamResultsEntry 3 }
alaSaaEthoamResultsInterPktDelay OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the inter-packet-delay with which the packets were sent
in the iteration.
"
::= { alaSaaEthoamResultsEntry 4 }
alaSaaEthoamResultsRunResult OBJECT-TYPE
SYNTAX INTEGER {
undetermined(0),
success(1),
failed(2),
aborted(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The result of the Eth-LB/DMM iteration."
::= { alaSaaEthoamResultsEntry 5 }
alaSaaEthoamResultsRunResultReason OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the iteration fails, this field indicates the reason
for failure. If the reason for failure cannot be determined
the value of this field is the string Unknown.
For successful iterations, the value of this field is the
string 'Iteration successful'.
"
::= { alaSaaEthoamResultsEntry 6 }
alaSaaEthoamResultsRunTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The date and time at which the iteraton was run.
"
::= { alaSaaEthoamResultsEntry 7 }
alaSaaEthoamResultsMinRTT OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum round trip time."
::= { alaSaaEthoamResultsEntry 8 }
alaSaaEthoamResultsAvgRTT OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average round trip time.
"
::= { alaSaaEthoamResultsEntry 9 }
alaSaaEthoamResultsMaxRTT OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum round trip time.
"
::= { alaSaaEthoamResultsEntry 10 }
alaSaaEthoamResultsMinJitter OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum jitter value.
"
::= { alaSaaEthoamResultsEntry 11 }
alaSaaEthoamResultsAvgJitter OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average jitter value.
"
::= { alaSaaEthoamResultsEntry 12 }
alaSaaEthoamResultsMaxJitter OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum jitter value.
"
::= { alaSaaEthoamResultsEntry 13 }
-- ***************************************************************
-- DESCRIPTION:
-- "History table data for the Eth-Saa.
-- "
-- ***************************************************************
alaSaaEthoamHistory OBJECT IDENTIFIER ::= { alcatelIND1SaaMIBObjects 7 }
alaSaaEthoamHistoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaSaaEthoamHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines a table for storing the results of an Eth-LB/DMM
iteration.
The number of entries in this table for
a configured test are limited by the value of the
corresponding alaSaaCtrlMaxHistoryRows object.
An entry in this table is created when the result of an Eth-LB/DMM
test is determined. An entry is removed from this table when
its corresponding alaSaaEthoamCtrlEntry is deleted.
The agent removes the oldest entry for a test in the
alaSaaEthoamHistoryTable to allow the addition of a new
entry for that test once the number of rows in the
alaSaaEthoamHistoryTable reaches the value specified by
alaSaaCtrlMaxHistoryRows."
::= { alaSaaEthoamHistory 1 }
alaSaaEthoamHistoryEntry OBJECT-TYPE
SYNTAX AlaSaaEthoamHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX {
alaSaaEthoamCtrlOwnerIndex,
alaSaaEthoamCtrlTestIndex,
alaSaaEthoamResultsTestRunIndex,
alaSaaEthoamHistoryIndex
}
::= { alaSaaEthoamHistoryTable 1 }
AlaSaaEthoamHistoryEntry ::=
SEQUENCE {
alaSaaEthoamHistoryIndex Unsigned32,
alaSaaEthoamHistoryPktRTT Integer32,
alaSaaEthoamHistoryPktJitter Integer32
}
alaSaaEthoamHistoryIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table is created when the result of
an Eth-LB/DMM iteration is determined. The initial 2 instance
identifier index values identify the alaSaaEthoamCtrlEntry
that an Eth-LB/DMM iteration result (alaSaaEthoamHistoryEntry) belongs
to. The alaSaaEthoamHistoryIndex element selects a single ping
iteration result.
The value of this object starts from 1 and can go up to 20,history of first 20 packets will be stored."
::= { alaSaaEthoamHistoryEntry 1 }
alaSaaEthoamHistoryPktRTT OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The round trip time taken by a single packet in an iteration.
"
::= { alaSaaEthoamHistoryEntry 2 }
alaSaaEthoamHistoryPktJitter OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The jitter value for a single packet in an iteration.
"
::= { alaSaaEthoamHistoryEntry 3 }
-- ***************************************************************
-- DESCRIPTION:
-- "control table data for the Mac-Ping SAA.
-- "
-- ***************************************************************
alaSaaMacCtrlConfig OBJECT IDENTIFIER ::= { alcatelIND1SaaMIBObjects 8 }
alaSaaMacCtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaSaaMacCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"It defines the MAC-Ping Control Table for providing the ping capability
via SNMP. The results of these tests are stored in the alaSaaMacResultsTable
and alaSaaMacHistoryTable.
"
::= { alaSaaMacCtrlConfig 1 }
alaSaaMacCtrlEntry OBJECT-TYPE
SYNTAX AlaSaaMacCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry for the alaSaaMacCtrl table.
"
INDEX {
alaSaaMacCtrlOwnerIndex,
alaSaaMacCtrlTestIndex
}
::= { alaSaaMacCtrlTable 1 }
AlaSaaMacCtrlEntry ::=
SEQUENCE {
alaSaaMacCtrlOwnerIndex SnmpAdminString,
alaSaaMacCtrlTestIndex SnmpAdminString,
alaSaaMacCtrlRowStatus RowStatus,
alaSaaMacCtrlDstAddress MacAddress,
alaSaaMacCtrlVlan Integer32,
alaSaaMacCtrlVlanPriority Integer32,
alaSaaMacCtrlIsid Integer32,
alaSaaMacCtrlPktData OCTET STRING,
alaSaaMacCtrlDropEligible TruthValue,
alaSaaMacCtrlPayloadSize Integer32,
alaSaaMacCtrlNumPkts Integer32,
alaSaaMacCtrlInterPktDelay Integer32,
alaSaaMacCtrlTotalPktsSent Counter32,
alaSaaMacCtrlTotalPktsRcvd Counter32,
alaSaaMacCtrlMinRTT Integer32,
alaSaaMacCtrlAvgRTT Integer32,
alaSaaMacCtrlMaxRTT Integer32,
alaSaaMacCtrlMinJitter Integer32,
alaSaaMacCtrlAvgJitter Integer32,
alaSaaMacCtrlMaxJitter Integer32,
alaSaaMacCtrlTSMinRTT DateAndTime,
alaSaaMacCtrlTSMaxRTT DateAndTime,
alaSaaMacCtrlTSMinJitter DateAndTime,
alaSaaMacCtrlTSMaxJitter DateAndTime
}
alaSaaMacCtrlOwnerIndex OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Owner name to identify the responsiblity of the entries
in the table."
DEFVAL { "USER" }
::= { alaSaaMacCtrlEntry 1 }
alaSaaMacCtrlTestIndex OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Unique name to identify the entries in the table.
This name is unique across various SNMP users.
"
::= { alaSaaMacCtrlEntry 2 }
alaSaaMacCtrlRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Allows entries to be created and deleted in the table.
createAndWait value is not supported for this object.
"
::= { alaSaaMacCtrlEntry 3 }
alaSaaMacCtrlDstAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the mac address to be used as the destination for
performing a MAC-Ping operation.
"
::= { alaSaaMacCtrlEntry 4 }
alaSaaMacCtrlVlan OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The 12 bit Vlan value to be used in the VLAN tag,
in the transmitted frame.
"
::= { alaSaaMacCtrlEntry 5 }
alaSaaMacCtrlVlanPriority OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Priority. 3 bit value to be used in the VLAN tag, if present
in the transmitted frame.
"
DEFVAL { 0 }
::= { alaSaaMacCtrlEntry 6 }
alaSaaMacCtrlIsid OBJECT-TYPE
SYNTAX Integer32 (256..16777214)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The i-domain Service Indentifier (I-SID) which
identifies the service instance in a PBB network on a
BEB switch. For a customer packet flowing
toward the b-domain, the I-SID is derived from the VFI
and inserted into the packet. For a packet arrived from
the b-domain, the I-SID is used to identify the VFI for
the i-domain processing.
From the service MIB.
"
::= { alaSaaMacCtrlEntry 7 }
alaSaaMacCtrlPktData OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..255))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"An arbitrary amount of data to be included in the Data TLV,
if the Data TLV is selected to be sent."
::= { alaSaaMacCtrlEntry 8 }
alaSaaMacCtrlDropEligible OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Drop Enable bit value to be used in the VLAN tag, if present
in the transmitted frame."
DEFVAL { false }
::= { alaSaaMacCtrlEntry 9 }
alaSaaMacCtrlPayloadSize OBJECT-TYPE
SYNTAX Integer32 (32..1500)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the size of the MAC-Ping payload to be used for the MAC-Ping operation.
"
DEFVAL { 32 }
::= { alaSaaMacCtrlEntry 10 }
alaSaaMacCtrlNumPkts OBJECT-TYPE
SYNTAX Integer32 (1..100)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the number of packets to be sent in one MAC-Ping iteration.Configuration of number of packets and inter packet delay should be such that total execution time remains less then 10s.
"
DEFVAL { 5 }
::= { alaSaaMacCtrlEntry 11 }
alaSaaMacCtrlInterPktDelay OBJECT-TYPE
SYNTAX Integer32 (100..1000)
UNITS "milli-seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the delay between two consecutive packets transmitted
during a MAC-Ping iteration.The value specified should be a multiple
of 100.
"
DEFVAL { 1000 }
::= { alaSaaMacCtrlEntry 12 }
alaSaaMacCtrlTotalPktsSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the total number of packets sent during all the ping iterations.
"
::= { alaSaaMacCtrlEntry 13 }
alaSaaMacCtrlTotalPktsRcvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the total number of packets received during all the ping iterations.
"
::= { alaSaaMacCtrlEntry 14 }
alaSaaMacCtrlMinRTT OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the minimum round trip time among all the iterations of the SAA.
"
::= { alaSaaMacCtrlEntry 15 }
alaSaaMacCtrlAvgRTT OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the average round trip time of all the iterations of the SAA.
"
::= { alaSaaMacCtrlEntry 16 }
alaSaaMacCtrlMaxRTT OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the maximum round trip time among all the iterations of the SAA.
"
::= { alaSaaMacCtrlEntry 17 }
alaSaaMacCtrlMinJitter OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the minimum jitter among all the iterations of the SAA.
"
::= { alaSaaMacCtrlEntry 18 }
alaSaaMacCtrlAvgJitter OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the average jitter of all the iterations of the SAA.
"
::= { alaSaaMacCtrlEntry 19 }
alaSaaMacCtrlMaxJitter OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the maximum jitter among all the iterations of the SAA.
"
::= { alaSaaMacCtrlEntry 20 }
alaSaaMacCtrlTSMinRTT OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the timestamp of the iteration that gave the minimum
packet delay.
"
::= { alaSaaMacCtrlEntry 21 }
alaSaaMacCtrlTSMaxRTT OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the timestamp of the iteration that gave the maximum
packet delay.
"
::= { alaSaaMacCtrlEntry 22 }
alaSaaMacCtrlTSMinJitter OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the timestamp of the iteration that gave the minimum
packet jitter.
"
::= { alaSaaMacCtrlEntry 23 }
alaSaaMacCtrlTSMaxJitter OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the timestamp of the iteration that gave the maximum
packet jitter.
"
::= { alaSaaMacCtrlEntry 24 }
-- ***************************************************************
-- DESCRIPTION:
-- "Results table data for the MAC-Ping SAA.
-- "
-- ***************************************************************
alaSaaMacResults OBJECT IDENTIFIER ::= { alcatelIND1SaaMIBObjects 9 }
alaSaaMacResultsTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaSaaMacResultsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines the MAC-Ping Results Table for providing
the capability of performing MAC-Ping operations. The
results of these operations are stored in the
alaSaaMacResultsTable and the alaSaaMacHistoryTable.
An entry is removed from the alaSaaMacResultsTable when
its corresponding alaSaaCtrlEntry is deleted."
::= { alaSaaMacResults 1 }
alaSaaMacResultsEntry OBJECT-TYPE
SYNTAX AlaSaaMacResultsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines an entry in the alaSaaMacResultsTable. The
alaSaaMacResultsTable has the same indexing as the
alaSaaMacCtrlTable in order for a alaSaaMacResultsEntry to
correspond to the alaSaaMacCtrlEntry that caused it to
be created.
An entry in this table summarizes results from multiple
invocations of the test configured by the corresponding
entry in alaSaaMacCtrlTable."
INDEX {
alaSaaMacCtrlOwnerIndex,
alaSaaMacCtrlTestIndex,
alaSaaMacResultsTestRunIndex
}
::= { alaSaaMacResultsTable 1 }
AlaSaaMacResultsEntry ::=
SEQUENCE {
alaSaaMacResultsTestRunIndex Unsigned32,
alaSaaMacResultsPktsSent Unsigned32,
alaSaaMacResultsPktsRcvd Unsigned32,
alaSaaMacResultsInterPktDelay Integer32,
alaSaaMacResultsRunResult INTEGER,
alaSaaMacResultsRunResultReason OCTET STRING,
alaSaaMacResultsRunTime DateAndTime,
alaSaaMacResultsMinRTT Integer32,
alaSaaMacResultsAvgRTT Integer32,
alaSaaMacResultsMaxRTT Integer32,
alaSaaMacResultsMinJitter Integer32,
alaSaaMacResultsAvgJitter Integer32,
alaSaaMacResultsMaxJitter Integer32
}
alaSaaMacResultsTestRunIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of alaSaaMacResultsTestRunIndex identifies the
row entry that reports results for a single test run.
The value of this object starts from 1 and can go upto a
maximum of alaSaaCtrlMaxHistoryRows."
::= { alaSaaMacResultsEntry 1 }
alaSaaMacResultsPktsSent OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the number of packets sent during a single MAC-Ping
iteration."
::= { alaSaaMacResultsEntry 2 }
alaSaaMacResultsPktsRcvd OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the number of packets received during a single MAC-Ping
iteration"
::= { alaSaaMacResultsEntry 3 }
alaSaaMacResultsInterPktDelay OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the inter-packet-delay with which the packets were sent
in the iteration.
"
::= { alaSaaMacResultsEntry 4 }
alaSaaMacResultsRunResult OBJECT-TYPE
SYNTAX INTEGER {
undetermined(0),
success(1),
failed(2),
aborted(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The result of the MAC-Ping iteration."
::= { alaSaaMacResultsEntry 5 }
alaSaaMacResultsRunResultReason OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the iteration fails, this field indicates the reason
for failure. If the reason for failure cannot be determined
the value of this field is the string Unknown.
For successful iterations, the value of this field is the
string 'Iteration successful'.
"
::= { alaSaaMacResultsEntry 6 }
alaSaaMacResultsRunTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The date and time at which the iteraton was run.
"
::= { alaSaaMacResultsEntry 7 }
alaSaaMacResultsMinRTT OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum round trip time."
::= { alaSaaMacResultsEntry 8 }
alaSaaMacResultsAvgRTT OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average round trip time.
"
::= { alaSaaMacResultsEntry 9 }
alaSaaMacResultsMaxRTT OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum round trip time.
"
::= { alaSaaMacResultsEntry 10 }
alaSaaMacResultsMinJitter OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum jitter value.
"
::= { alaSaaMacResultsEntry 11 }
alaSaaMacResultsAvgJitter OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average jitter value.
"
::= { alaSaaMacResultsEntry 12 }
alaSaaMacResultsMaxJitter OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum jitter value.
"
::= { alaSaaMacResultsEntry 13 }
-- ***************************************************************
-- DESCRIPTION:
-- "History table data for the MAC-Ping SAA.
-- "
-- ***************************************************************
alaSaaMacHistory OBJECT IDENTIFIER ::= { alcatelIND1SaaMIBObjects 10 }
alaSaaMacHistoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaSaaMacHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines a table for storing the results of a MAC-Ping
iteration.
The number of entries in this table for
a configured test are limited by the value of the
corresponding alaSaaCtrlMaxHistoryRows object.
An entry in this table is created when the result of an MAC-Ping
test is determined. An entry is removed from this table when
its corresponding alaSaaMacCtrlEntry is deleted.
The agent removes the oldest entry for a test in the
alaSaaMacHistoryTable to allow the addition of a new
entry for that test once the number of rows in the
alaSaaMacHistoryTable reaches the value specified by
alaSaaCtrlMaxHistoryRows."
::= { alaSaaMacHistory 1 }
alaSaaMacHistoryEntry OBJECT-TYPE
SYNTAX AlaSaaMacHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX {
alaSaaMacCtrlOwnerIndex,
alaSaaMacCtrlTestIndex,
alaSaaMacResultsTestRunIndex,
alaSaaMacHistoryIndex
}
::= { alaSaaMacHistoryTable 1 }
AlaSaaMacHistoryEntry ::=
SEQUENCE {
alaSaaMacHistoryIndex Unsigned32,
alaSaaMacHistoryPktRTT Integer32,
alaSaaMacHistoryPktJitter Integer32
}
alaSaaMacHistoryIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table is created when the result of
an MAC-ping iteration is determined. The initial 2 instance
identifier index values identify the alaSaaMacCtrlEntry
that an MAC-ping iteration result (alaSaaMacHistoryEntry) belongs
to. The alaSaaMacHistoryIndex element selects a single ping
iteration result.
The value of this object starts from 1 and can go up to 20,history of first 20 packets will be stored."
::= { alaSaaMacHistoryEntry 1 }
alaSaaMacHistoryPktRTT OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The round trip time taken by a single packet in an iteration.
"
::= { alaSaaMacHistoryEntry 2 }
alaSaaMacHistoryPktJitter OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The jitter value for a single packet in an iteration.
"
::= { alaSaaMacHistoryEntry 3 }
-- ***************************************************************
-- DESCRIPTION:
-- "MAC Results port table.
-- "
-- ***************************************************************
alaSaaMacResultsPort OBJECT IDENTIFIER ::= { alcatelIND1SaaMIBObjects 11 }
alaSaaMacResultsPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaSaaMacResultsPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines a table for storing the results of ports for a MAC-Ping
iteration.
It only holds results from the last iteration."
::= { alaSaaMacResultsPort 1 }
alaSaaMacResultsPortEntry OBJECT-TYPE
SYNTAX AlaSaaMacResultsPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX {
alaSaaMacCtrlOwnerIndex,
alaSaaMacCtrlTestIndex,
alaSaaMacResultsTestRunIndex,
alaSaaMacResultsPortChassis,
alaSaaMacResultsPortSlot,
alaSaaMacResultsPortPort
}
::= { alaSaaMacResultsPortTable 1 }
AlaSaaMacResultsPortEntry ::=
SEQUENCE {
alaSaaMacResultsPortChassis Integer32,
alaSaaMacResultsPortSlot Integer32,
alaSaaMacResultsPortPort Integer32,
alaSaaMacResultsPortPktsSent Integer32,
alaSaaMacResultsPortPktsRcvd Integer32,
alaSaaMacResultsPortRTT Integer32,
alaSaaMacResultsPortMinRTT Integer32,
alaSaaMacResultsPortMaxRTT Integer32,
alaSaaMacResultsPortJitter Integer32,
alaSaaMacResultsPortMinJitter Integer32,
alaSaaMacResultsPortMaxJitter Integer32
}
alaSaaMacResultsPortChassis OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The chassis number of the entry. "
::= { alaSaaMacResultsPortEntry 1 }
alaSaaMacResultsPortSlot OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The slot number of the entry. "
::= { alaSaaMacResultsPortEntry 2 }
alaSaaMacResultsPortPort OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The port number of the entry. "
::= { alaSaaMacResultsPortEntry 3 }
alaSaaMacResultsPortPktsSent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmit packets.
"
::= { alaSaaMacResultsPortEntry 4 }
alaSaaMacResultsPortPktsRcvd OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of receive packets.
"
::= { alaSaaMacResultsPortEntry 5 }
alaSaaMacResultsPortRTT OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The round trip time taken by a single packet in an iteration.
"
::= { alaSaaMacResultsPortEntry 6 }
alaSaaMacResultsPortMinRTT OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum round trip time taken by a single packet for the port.
"
::= { alaSaaMacResultsPortEntry 7 }
alaSaaMacResultsPortMaxRTT OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum round trip time taken by a single for the port.
"
::= { alaSaaMacResultsPortEntry 8 }
alaSaaMacResultsPortJitter OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The jitter value for a single packet in an iteration.
"
::= { alaSaaMacResultsPortEntry 9 }
alaSaaMacResultsPortMinJitter OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum jitter value for a single packet for the port.
"
::= { alaSaaMacResultsPortEntry 10 }
alaSaaMacResultsPortMaxJitter OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum jitter value for a single packet for the port.
"
::= { alaSaaMacResultsPortEntry 11 }
-- ***************************************************************
-- DESCRIPTION:
-- "XML file generation
-- "
-- ***************************************************************
alaSaaXmlFeature OBJECT IDENTIFIER ::= { alcatelIND1SaaMIBObjects 13 }
alaSaaXmlStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enables the XML file feature."
DEFVAL { disable }
::= { alaSaaXmlFeature 1 }
alaSaaXmlFilename OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..64))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Save file location."
::= { alaSaaXmlFeature 2 }
alaSaaXmlInterval OBJECT-TYPE
SYNTAX Integer32 (5..15000)
UNITS "minutes"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Interval where SAA will save the file. The value is in minutes."
DEFVAL { 20 }
::= { alaSaaXmlFeature 3 }
-- ***************************************************************
-- DESCRIPTION:
-- "SPB auto creation parameters
-- "
-- ***************************************************************
alaSaaSpbFeature OBJECT IDENTIFIER ::= { alcatelIND1SaaMIBObjects 14 }
alaSaaSpbAutoCreate OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Determines if the SPB VLANs are automatically configured."
DEFVAL { off }
::= { alaSaaSpbFeature 1 }
alaSaaSpbAutoStart OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Determines if the SPB VLANs are automatically started."
DEFVAL { off }
::= { alaSaaSpbFeature 2 }
alaSaaSpbInterval OBJECT-TYPE
SYNTAX Integer32 (1..1500)
UNITS "minutes"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Interval, in minutes, between two iterations of the SAA test.
Valid values are 1, 2, 5 and 10-1500."
DEFVAL { 150 }
::= { alaSaaSpbFeature 3 }
alaSaaSpbNumPkts OBJECT-TYPE
SYNTAX Integer32 (1..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of packets to be sent in one iteration of Eth-LB/DMM test.
"
DEFVAL { 5 }
::= { alaSaaSpbFeature 4 }
alaSaaSpbInterPktDelay OBJECT-TYPE
SYNTAX Integer32 (100..1000)
UNITS "milli-seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the delay between two consecutive packets transmitted
during an iteration. The value specified should be a
multiple of 100.
"
DEFVAL { 1000 }
::= { alaSaaSpbFeature 5 }
alaSaaSpbPayloadSize OBJECT-TYPE
SYNTAX Integer32 (32..1500)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the size of the MAC-Ping payload to be used for the MAC-Ping operation.
"
DEFVAL { 32 }
::= { alaSaaSpbFeature 6 }
alaSaaSpbVlanPriority OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Priority. 3 bit value to be used in the VLAN tag, if present
in the transmitted frame.
"
DEFVAL { 0 }
::= { alaSaaSpbFeature 7 }
alaSaaSpbDropEligible OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Drop Enable bit value to be used in the VLAN tag, if present
in the transmitted frame."
DEFVAL { false }
::= { alaSaaSpbFeature 8 }
alaSaaSpbPktData OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An arbitrary amount of data to be included in the Data TLV,
if the Data TLV is selected to be sent."
::= { alaSaaSpbFeature 9 }
alaSaaSpbJitterThreshold OBJECT-TYPE
SYNTAX Integer32 (0..1000000)
UNITS "micro-seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Trap is generated when the Jitter Threshold is crossed.
0 indicates it is diabled."
DEFVAL { 0 }
::= { alaSaaSpbFeature 10 }
alaSaaSpbRTTThreshold OBJECT-TYPE
SYNTAX Integer32 (0..1000000)
UNITS "micro-seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Trap is generated when the RTT Threshold is crossed.
0 indicates it is diabled."
DEFVAL { 0 }
::= { alaSaaSpbFeature 11 }
alaSaaSpbReset OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When set TRUE, will set the alaSaaSpbFeature variables
to the defualts."
DEFVAL { false }
::= { alaSaaSpbFeature 12 }
alaSaaSpbKeep OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When set on, SPB sessions will not be deallocated when SPB indicates a MAC or VLAN went away."
DEFVAL { off }
::= { alaSaaSpbFeature 13 }
alaSaaSpbFlush OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When set TRUE, SPB sessions will be flushed and reallocated with the current SPB MACs and VLANs."
DEFVAL { false }
::= { alaSaaSpbFeature 14 }
-- -------------------------------------------------------------
-- SAA Event Notification
-- -------------------------------------------------------------
saaTrapsObj OBJECT IDENTIFIER ::= { alcatelIND1SaaMIBObjects 15 }
alaSaaIPIterationCompleteTrap NOTIFICATION-TYPE
OBJECTS { alaSaaCtrlOwnerIndex,
alaSaaCtrlTestIndex,
alaSaaIpResultsTestRunIndex,
alaSaaCtrlLastRunResult,
alaSaaCtrlLastRunTime
}
STATUS current
DESCRIPTION
"A alaSaaIPIterationCompleteTrap notification is sent when a IP SAA iteration
is completed."
::= { alcatelIND1SaaNotifications 1 }
alaSaaEthIterationCompleteTrap NOTIFICATION-TYPE
OBJECTS { alaSaaCtrlOwnerIndex,
alaSaaCtrlTestIndex,
alaSaaEthoamResultsTestRunIndex,
alaSaaCtrlLastRunResult,
alaSaaCtrlLastRunTime
}
STATUS current
DESCRIPTION
"A alaSaaEthIterationCompleteTrap notification is sent when a Eth-LB
or Eth-DMM SAA iteration is completed."
::= { alcatelIND1SaaNotifications 2 }
alaSaaMacIterationCompleteTrap NOTIFICATION-TYPE
OBJECTS { alaSaaCtrlOwnerIndex,
alaSaaCtrlTestIndex,
alaSaaMacResultsTestRunIndex,
alaSaaCtrlLastRunResult,
alaSaaCtrlLastRunTime
}
STATUS current
DESCRIPTION
"A alaSaaIPIterationCompleteTrap notification is sent when a IP SAA iteration
is completed."
::= { alcatelIND1SaaNotifications 3 }
alaSaaPacketLossTrap NOTIFICATION-TYPE
OBJECTS { alaSaaCtrlOwnerIndex,
alaSaaCtrlTestIndex,
alaSaaCtrlLastRunResult,
alaSaaCtrlLastRunTime,
alaSaaMacResultsPktsSent,
alaSaaMacResultsPktsRcvd
}
STATUS current
DESCRIPTION
"A alaSaaPacketLossTrap notification is sent when
a packet is lost during a test."
::= { alcatelIND1SaaNotifications 4 }
alaSaaJitterThresholdYellowTrap NOTIFICATION-TYPE
OBJECTS { alaSaaCtrlOwnerIndex,
alaSaaCtrlTestIndex,
alaSaaCtrlLastRunResult,
alaSaaCtrlLastRunTime,
alaSaaCtrlJitterThreshold,
alaSaaMacResultsAvgJitter
}
STATUS current
DESCRIPTION
"A alaSaaJitterThresholdTrap notification is sent when 90% of
the Jitter Threshold is crossed."
::= { alcatelIND1SaaNotifications 5 }
alaSaaRTTThresholdYellowTrap NOTIFICATION-TYPE
OBJECTS { alaSaaCtrlOwnerIndex,
alaSaaCtrlTestIndex,
alaSaaCtrlLastRunResult,
alaSaaCtrlLastRunTime,
alaSaaCtrlRTTThreshold,
alaSaaMacResultsAvgRTT
}
STATUS current
DESCRIPTION
"A alaSaaRTTThresholdYellowTrap notification is sent when 90% of
the RTT Threshold is crossed."
::= { alcatelIND1SaaNotifications 6 }
alaSaaJitterThresholdRedTrap NOTIFICATION-TYPE
OBJECTS { alaSaaCtrlOwnerIndex,
alaSaaCtrlTestIndex,
alaSaaCtrlLastRunResult,
alaSaaCtrlLastRunTime,
alaSaaCtrlJitterThreshold,
alaSaaMacResultsAvgJitter
}
STATUS current
DESCRIPTION
"A alaSaaJitterThresholdTrap notification is sent when the
Jitter Threshold is crossed."
::= { alcatelIND1SaaNotifications 7 }
alaSaaRTTThresholdRedTrap NOTIFICATION-TYPE
OBJECTS { alaSaaCtrlOwnerIndex,
alaSaaCtrlTestIndex,
alaSaaCtrlLastRunResult,
alaSaaCtrlLastRunTime,
alaSaaCtrlRTTThreshold,
alaSaaMacResultsAvgRTT
}
STATUS current
DESCRIPTION
"A alaSaaRTTThresholdRedTrap notification is sent when the
RTT Threshold is crossed."
::= { alcatelIND1SaaNotifications 8 }
-- -------------------------------------------------------------
-- COMPLIANCE
-- -------------------------------------------------------------
alcatelIND1SaaMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Compliance statement for Saa."
MODULE
MANDATORY-GROUPS
{
alaSaaCtrlConfigGroup,
alaSaaIpCtrlConfigGroup,
alaSaaIpResultsGroup,
alaSaaIpHistoryGroup,
alaSaaEthoamCtrlConfigGroup,
alaSaaEthoamResultsGroup,
alaSaaEthoamHistoryGroup,
alaSaaMacCtrlConfigGroup,
alaSaaMacResultsGroup,
alaSaaMacHistoryGroup,
alaSaaMacResultsPortGroup,
alaSaaXmlGroup,
alaSaaSpbGroup,
alaSaaNotificationsGroup
}
::= { alcatelIND1SaaMIBCompliances 1 }
-- -------------------------------------------------------------
-- UNITS OF CONFORMANCE
-- -------------------------------------------------------------
alaSaaCtrlConfigGroup OBJECT-GROUP
OBJECTS
{
alaSaaCtrlOwnerIndex,
alaSaaCtrlTestIndex,
alaSaaCtrlRowStatus,
alaSaaCtrlDescr,
alaSaaCtrlAdminStatus,
alaSaaCtrlTestMode,
alaSaaCtrlRuns,
alaSaaCtrlFailures,
alaSaaCtrlLastRunResult,
alaSaaCtrlLastRunTime,
alaSaaCtrlInterval,
alaSaaCtrlStartAt,
alaSaaCtrlStopAt,
alaSaaCtrlMaxHistoryRows,
alaSaaCtrlJitterThreshold,
alaSaaCtrlRTTThreshold
}
STATUS current
DESCRIPTION
"Collection of objects for management of Saa control Group."
::= { alcatelIND1SaaMIBGroups 1 }
alaSaaIpCtrlConfigGroup OBJECT-GROUP
OBJECTS
{
alaSaaIpCtrlRowStatus,
alaSaaIpCtrlTestMode,
alaSaaIpCtrlTgtAddrType,
alaSaaIpCtrlTgtAddress,
alaSaaIpCtrlSrcAddrType,
alaSaaIpCtrlSrcAddress,
alaSaaIpCtrlPayloadSize,
alaSaaIpCtrlNumPkts,
alaSaaIpCtrlInterPktDelay,
alaSaaIpCtrlTypeOfService,
alaSaaIpCtrlVRFId,
alaSaaIpCtrlTotalPktsSent,
alaSaaIpCtrlTotalPktsRcvd,
alaSaaIpCtrlMinRTT,
alaSaaIpCtrlAvgRTT,
alaSaaIpCtrlMaxRTT,
alaSaaIpCtrlMinJitter,
alaSaaIpCtrlAvgJitter,
alaSaaIpCtrlMaxJitter,
alaSaaIpCtrlTSMinRTT,
alaSaaIpCtrlTSMaxRTT,
alaSaaIpCtrlTSMinJitter,
alaSaaIpCtrlTSMaxJitter
}
STATUS current
DESCRIPTION
"Collection of objects for management of Saa Ip Configuration Table."
::= { alcatelIND1SaaMIBGroups 2 }
alaSaaIpResultsGroup OBJECT-GROUP
OBJECTS
{
alaSaaIpResultsTestRunIndex,
alaSaaIpResultsPktsSent,
alaSaaIpResultsPktsRcvd,
alaSaaIpResultsInterPktDelay,
alaSaaIpResultsRunResult,
alaSaaIpResultsRunResultReason,
alaSaaIpResultsRunTime,
alaSaaIpResultsMinRTT,
alaSaaIpResultsAvgRTT,
alaSaaIpResultsMaxRTT,
alaSaaIpResultsMinJitter,
alaSaaIpResultsAvgJitter,
alaSaaIpResultsMaxJitter
}
STATUS current
DESCRIPTION
"Collection of objects for management of Saa Ip Results Table."
::= { alcatelIND1SaaMIBGroups 3 }
alaSaaIpHistoryGroup OBJECT-GROUP
OBJECTS
{
alaSaaIpHistoryPktRTT,
alaSaaIpHistoryPktJitter
}
STATUS current
DESCRIPTION
"Collection of objects for management of Saa Ip history table."
::= { alcatelIND1SaaMIBGroups 4 }
alaSaaEthoamCtrlConfigGroup OBJECT-GROUP
OBJECTS
{
alaSaaEthoamCtrlRowStatus,
alaSaaEthoamCtrlTestMode,
alaSaaEthoamCtrlTgtMepId,
alaSaaEthoamCtrlTgtMAC,
alaSaaEthoamCtrlSrcMepId,
alaSaaEthoamCtrlDomainName,
alaSaaEthoamCtrlAssociationName,
alaSaaEthoamCtrlPktTimeOut,
alaSaaEthoamCtrlNumPkts,
alaSaaEthoamCtrlInterPktDelay,
alaSaaEthoamCtrlPktData,
alaSaaEthoamCtrlVlanPriority,
alaSaaEthoamCtrlDropEligible,
alaSaaEthoamCtrlTotalPktsRcvd,
alaSaaEthoamCtrlTotalPktsSent,
alaSaaEthoamCtrlMinRTT,
alaSaaEthoamCtrlAvgRTT,
alaSaaEthoamCtrlMaxRTT,
alaSaaEthoamCtrlMinJitter,
alaSaaEthoamCtrlAvgJitter,
alaSaaEthoamCtrlMaxJitter,
alaSaaEthoamCtrlTSMinRTT,
alaSaaEthoamCtrlTSMaxRTT,
alaSaaEthoamCtrlTSMinJitter,
alaSaaEthoamCtrlTSMaxJitter
}
STATUS current
DESCRIPTION
"Collection of objects for management of Saa Ethoam Configuration Table."
::= { alcatelIND1SaaMIBGroups 5 }
alaSaaEthoamResultsGroup OBJECT-GROUP
OBJECTS
{
alaSaaEthoamResultsTestRunIndex,
alaSaaEthoamResultsPktsSent,
alaSaaEthoamResultsPktsRcvd,
alaSaaEthoamResultsInterPktDelay,
alaSaaEthoamResultsRunResult,
alaSaaEthoamResultsRunResultReason,
alaSaaEthoamResultsRunTime,
alaSaaEthoamResultsMinRTT,
alaSaaEthoamResultsAvgRTT,
alaSaaEthoamResultsMaxRTT,
alaSaaEthoamResultsMinJitter,
alaSaaEthoamResultsAvgJitter,
alaSaaEthoamResultsMaxJitter
}
STATUS current
DESCRIPTION
"Collection of objects for management of Saa Ethoam Results Table."
::= { alcatelIND1SaaMIBGroups 6 }
alaSaaEthoamHistoryGroup OBJECT-GROUP
OBJECTS
{
alaSaaEthoamHistoryPktRTT,
alaSaaEthoamHistoryPktJitter
}
STATUS current
DESCRIPTION
"Collection of objects for management of Saa Ethoam history table."
::= { alcatelIND1SaaMIBGroups 7 }
alaSaaMacCtrlConfigGroup OBJECT-GROUP
OBJECTS
{
alaSaaMacCtrlRowStatus,
alaSaaMacCtrlDstAddress,
alaSaaMacCtrlVlan,
alaSaaMacCtrlVlanPriority,
alaSaaMacCtrlIsid,
alaSaaMacCtrlPktData,
alaSaaMacCtrlDropEligible,
alaSaaMacCtrlPayloadSize,
alaSaaMacCtrlNumPkts,
alaSaaMacCtrlInterPktDelay,
alaSaaMacCtrlTotalPktsSent,
alaSaaMacCtrlTotalPktsRcvd,
alaSaaMacCtrlMinRTT,
alaSaaMacCtrlAvgRTT,
alaSaaMacCtrlMaxRTT,
alaSaaMacCtrlMinJitter,
alaSaaMacCtrlAvgJitter,
alaSaaMacCtrlMaxJitter,
alaSaaMacCtrlTSMinRTT,
alaSaaMacCtrlTSMaxRTT,
alaSaaMacCtrlTSMinJitter,
alaSaaMacCtrlTSMaxJitter
}
STATUS current
DESCRIPTION
"Collection of objects for management of Saa MAC-Ping Configuration Table."
::= { alcatelIND1SaaMIBGroups 8 }
alaSaaMacResultsGroup OBJECT-GROUP
OBJECTS
{
alaSaaMacResultsPktsSent,
alaSaaMacResultsPktsRcvd,
alaSaaMacResultsInterPktDelay,
alaSaaMacResultsRunResult,
alaSaaMacResultsRunResultReason,
alaSaaMacResultsRunTime,
alaSaaMacResultsMinRTT,
alaSaaMacResultsAvgRTT,
alaSaaMacResultsMaxRTT,
alaSaaMacResultsMinJitter,
alaSaaMacResultsAvgJitter,
alaSaaMacResultsMaxJitter
}
STATUS current
DESCRIPTION
"Collection of objects for management of Saa MAC-Ping Results Table."
::= { alcatelIND1SaaMIBGroups 9 }
alaSaaMacHistoryGroup OBJECT-GROUP
OBJECTS
{
alaSaaMacHistoryPktRTT,
alaSaaMacHistoryPktJitter,
alaSaaMacResultsTestRunIndex
}
STATUS current
DESCRIPTION
"Collection of objects for management of Saa Mac-Ping History table."
::= { alcatelIND1SaaMIBGroups 10 }
alaSaaNotificationsGroup NOTIFICATION-GROUP
NOTIFICATIONS
{
alaSaaIPIterationCompleteTrap,
alaSaaEthIterationCompleteTrap,
alaSaaMacIterationCompleteTrap,
alaSaaPacketLossTrap,
alaSaaJitterThresholdYellowTrap,
alaSaaRTTThresholdYellowTrap,
alaSaaJitterThresholdRedTrap,
alaSaaRTTThresholdRedTrap
}
STATUS current
DESCRIPTION
"A collection of notifications used by SAA to signal
to a management entity that SAA iteration has completed."
::= { alcatelIND1SaaMIBGroups 11 }
alaSaaMacResultsPortGroup OBJECT-GROUP
OBJECTS
{
alaSaaMacResultsPortChassis,
alaSaaMacResultsPortSlot,
alaSaaMacResultsPortPort,
alaSaaMacResultsPortPktsSent,
alaSaaMacResultsPortPktsRcvd,
alaSaaMacResultsPortRTT,
alaSaaMacResultsPortMinRTT,
alaSaaMacResultsPortMaxRTT,
alaSaaMacResultsPortJitter,
alaSaaMacResultsPortMinJitter,
alaSaaMacResultsPortMaxJitter
}
STATUS current
DESCRIPTION
"Collection of objects for management of Saa Mac-Ping Port table."
::= { alcatelIND1SaaMIBGroups 12 }
alaSaaXmlGroup OBJECT-GROUP
OBJECTS
{
alaSaaXmlStatus,
alaSaaXmlFilename,
alaSaaXmlInterval
}
STATUS current
DESCRIPTION
"Collection of objects for management of profile bindings."
::= { alcatelIND1SaaMIBGroups 13 }
alaSaaSpbGroup OBJECT-GROUP
OBJECTS
{
alaSaaSpbAutoCreate,
alaSaaSpbAutoStart,
alaSaaSpbInterval,
alaSaaSpbNumPkts,
alaSaaSpbInterPktDelay,
alaSaaSpbPayloadSize,
alaSaaSpbVlanPriority,
alaSaaSpbDropEligible,
alaSaaSpbPktData,
alaSaaSpbJitterThreshold,
alaSaaSpbRTTThreshold,
alaSaaSpbReset,
alaSaaSpbKeep,
alaSaaSpbFlush
}
STATUS current
DESCRIPTION
"Collection of objects for management of profile bindings."
::= { alcatelIND1SaaMIBGroups 14 }
END
Reference in New Issue View Git Blame Copy Permalink