david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
mibs/MIBS/perle/PERLE-MCR-MGT-MIB
David Leutgeb 98a672123c Initial commit
2023-12-05 12:25:34 +01:00

23261 lines
807 KiB
Plaintext
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

--
-- Copyright (C) 2014 - Perle Systems Limited
--
-- Private MIB module for the Perle Managed Media Converters.
-- This MIB will be used in Windows and UNIX Environment.
--
-- Documentation References:
-- Please reference the following user guides found at
-- http://www.perle.com/downloads/managed-media-converter.shtml
-- to obtain more information on the media converters operation
-- and configuration fields.
-- MCR-MGT Management Module User’s Guide
-- MCR1900 Media Converter 19-Slot Chassis Installation Guide
-- Perle Gigabit Media Converter Module Installation Guide
-- Perle 10/100/1000 Ethernet Media Converter Module Installation Guide
-- Perle Fast Ethernet Media Converter Module Installation Guide
-- Perle 10/100 Ethernet Media Converter Module Installation Guide
-- Perle Fast Ethernet Fiber to Fiber Module Installation Guide
-- Perle Gigabit Fiber to Fiber Module Installation Guide
-- Perle 10G Media Converter Module Installation Guide
-- Perle eX-1CM Media Converter Module Installation Guide
-- Perle CM-4GPT Media Converter Module Installation Guide
-- Perle CM-10GT Media Converter Module Installation Guide
--
-- Version: 14.09.03 (year.month.day)
--
-- History:
-- 14.09.03 - Added support for SGMII mode on the CM-1110 Module and SNTP authentication
-- 13.03.22 - Added support for ex-1CM, CM-4GPT and CM-10GT Media Converter Modules
-- 12.11.15 - Added support for CM-10G Media Converter Modules
-- 12.02.20 - Added support for PerleView features.
-- 11.01.20 - Added support for advanced switch features and dual-fiber modules
-- 11.01.12 - Added support for 2-slot chassis
-- 10.09.10 - Initial release
--
PERLE-MCR-MGT-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-TYPE,
IpAddress, Counter32, Unsigned32, Integer32, Counter64, enterprises, TimeTicks
FROM SNMPv2-SMI
TEXTUAL-CONVENTION, DisplayString, MacAddress, DateAndTime
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
FROM SNMPv2-CONF
SnmpEngineID
FROM SNMP-FRAMEWORK-MIB;
--
-- MODULE IDENTITY for the private MIB of Perle Managed Media Converters
--
mcrMGTMIB MODULE-IDENTITY
LAST-UPDATED
"201409030000Z"
ORGANIZATION
"Perle Systems Limited"
CONTACT-INFO
"Postal: Perle Systems Limited
60 Renfrew Drive
Markham, Ontario
Canada
L3R 0E1
http://www.perle.com/"
DESCRIPTION
"The private MIB module for the Perle Managed Media Converters"
REVISION
"201409030000Z"
DESCRIPTION
"Added support for SGMII mode on the CM-1110 Module and SNTP authentication"
REVISION
"201303020000Z"
DESCRIPTION
"Added support for ex-1CM, CM-4GPT and CM-10GT Media Converter Modules"
REVISION
"201211150000Z"
DESCRIPTION
"Added support for CM-10G Media Converter Modules"
REVISION
"201202010000Z"
DESCRIPTION
"Added support for PerleView features, alarm/warning table, port status table and tftp file transfer"
REVISION
"201101200000Z"
DESCRIPTION
"Added support for advanced switch features and dual-fiber modules"
REVISION
"201101120000Z"
DESCRIPTION
"Added support for 2-slot chassis"
REVISION
"201009100000Z"
DESCRIPTION
"Initial Release"
::= { mediaconverterMIB 1 }
--
-- OID tree for perle MIBs
--
perle OBJECT IDENTIFIER ::= { enterprises 1966 }
productId OBJECT IDENTIFIER ::= { perle 20 }
mediaConverter OBJECT IDENTIFIER ::= { productId 1 }
mcrMGT OBJECT IDENTIFIER ::= { mediaConverter 1 }
productMIB OBJECT IDENTIFIER ::= { perle 21 }
mediaconverterMIB OBJECT IDENTIFIER ::= { productMIB 1 }
mcrMGTMIBNotifications OBJECT IDENTIFIER ::= { mcrMGTMIB 0 }
mcrMGTMIBObjects OBJECT IDENTIFIER ::= { mcrMGTMIB 1 }
mcrMGTMIBConformance OBJECT IDENTIFIER ::= { mcrMGTMIB 2 }
mcrChassisGroup OBJECT IDENTIFIER ::= { mcrMGTMIBObjects 1 }
mcrManagementGroup OBJECT IDENTIFIER ::= { mcrMGTMIBObjects 2 }
--
-- Textual conventions
--
YesNoValue ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents a YES or NO value."
SYNTAX INTEGER { notApplicable(-1), no(0), yes(1) }
OnOffValue ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents an ON or OFF value."
SYNTAX INTEGER { notApplicable(-1), off(0), on(1) }
EnableDisableValue ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents an ON or OFF value."
SYNTAX INTEGER { notApplicable(-1), disable(0), enable(1) }
Ipv4v6Address ::= TEXTUAL-CONVENTION
DISPLAY-HINT "255a"
STATUS current
DESCRIPTION
"An IPv4 or IPv6 address"
SYNTAX OCTET STRING (SIZE (0..255))
GenericTableIndex ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"An arbitrary value that uniquely identifies the entity. The value
should be a small, positive integer. Index values for different
entities are not necessarily contiguous."
SYNTAX Unsigned32 (1..2147483647)
SlotNumber ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"Chassis slot number. Valid values are 1 to the highest slot number
the chassis supports. For example a MCR-1900 chassis the valid slot
numbers are 1 to 19"
SYNTAX Unsigned32(1..2147483647)
ContainerStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"When you perform a GET on this variable, one of
the following values will be returned:
1-Indicates that the container folder is active with no changes.
2-Indicates that the container folder is active with change(s).
Once you have completed setting the variables in a folder, you
will want to submit your changes to the management module. To do
this, set the Status variable to 4. If you want to discard the
changes, set the Status variable to 6.
4-Indicates that the changes in the container folder are to be
submitted to the management module.
6-Indicates that the changes in the container folder are to be
discarded."
SYNTAX INTEGER {
active(1),
modified(2),
applyChanges(4),
discardChanges(6)
}
AlertSeverityLevel ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The alert severity level of an event."
SYNTAX INTEGER {
systemLevelFault(0),
moduleLevelFault(1),
persistantError(2),
oneTimeError(3),
significantEvent(4),
normalOperation(5)
}
--
-- mcrChassisGroup
--
--
-- mcrChassisTable
--
mcrChassisTable OBJECT-TYPE
SYNTAX SEQUENCE OF McrChassisEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of chassis diagnostic type information."
::= { mcrChassisGroup 1 }
mcrChassisEntry OBJECT-TYPE
SYNTAX McrChassisEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of the table, each relating to a separate chassis."
INDEX { mcrChassisIndex }
::= { mcrChassisTable 1 }
McrChassisEntry ::=
SEQUENCE {
mcrChassisIndex Unsigned32,
chassisModelName DisplayString,
chassisModelDesc DisplayString,
chassisSerialNumber DisplayString,
chassisBootloaderVersion DisplayString,
chassisFirmwareVersion DisplayString,
chassisOutStandWarnAlarms Unsigned32,
chassisDiagStatus Unsigned32,
chassisTemperature Integer32,
chassisCfgHighTempThreshold Integer32,
chassisReset YesNoValue,
chassisCfgMgmtSlot Unsigned32
}
mcrChassisIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object identifies the chassis number."
::= { mcrChassisEntry 1 }
chassisModelName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the name of the chassis model. For
the 2-slot chassis, this is the product model."
::= { mcrChassisEntry 2 }
chassisModelDesc OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies a static description of the chassis."
::= { mcrChassisEntry 3 }
chassisSerialNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the chassis serial number.
For the 2-slot chassis, this is writeable (and user-defined). For
other chassis, this is read-only (and reflects the chassis'
actual serial number)."
::= { mcrChassisEntry 4 }
chassisBootloaderVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the chassis bootloader version.
(Not applicable to 2-slot chassis.)"
::= { mcrChassisEntry 5 }
chassisFirmwareVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the chassis firmware version.
(Not applicable to 2-slot chassis.)"
::= { mcrChassisEntry 6 }
chassisOutStandWarnAlarms OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the number of outstanding warnings and alarms for
this chassis. If this value is not zero then user intervention is needed
to resolve the outstanding warnings and alarms.
(Not applicable to 2-slot chassis.)"
::= { mcrChassisEntry 7 }
chassisDiagStatus OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the chassis self-test diagnostics result.
It will return zero if it passed and non-zero error code if it
failed. The following are possible non-zero error codes:
1 - Firmware download required
2 - Temperature sensor not functional
(Not applicable to 2-slot chassis.)"
::= { mcrChassisEntry 8 }
chassisTemperature OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the current temperature of the chassis. The
temperature returned will be either Celsius or Fahrenheit based on your
current regional display settings. If the temperature returned is -1
then a problem with the temperature sensor has occurred and the current
temperature is unknown.
(Not applicable to 2-slot chassis.)"
::= { mcrChassisEntry 9 }
chassisCfgHighTempThreshold OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the chassis temperature high threshold. If the
chassis temperature exceeds this threshold then an alert will be generated.
The value read/written will be either Celsius or Fahrenheit based on your
current regional display settings. The valid range for this threshold
is 0 to 70 degrees Celsius or 32 to 158 degrees Fahrenheit.
(Not applicable to 2-slot chassis.)"
::= { mcrChassisEntry 10 }
chassisReset OBJECT-TYPE
SYNTAX YesNoValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows the resetting of the chassis (all modules). Reading this
object always returns 0."
::= { mcrChassisEntry 11 }
chassisCfgMgmtSlot OBJECT-TYPE
SYNTAX Unsigned32(1..2)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"For the 2-slot chassis, this is the configured slot index of the
management module. This value only needs to be changed if the
management module is physically installed in slot 2, rather than
slot 1. The management module should be restarted after changing
this value."
::= { mcrChassisEntry 12 }
-- end of mcrChassisTable
--
--
-- mcrPsmuTable
--
mcrPsmuTable OBJECT-TYPE
SYNTAX SEQUENCE OF McrPsmuEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of PSMU (Power Supply Monitoring Unit) diagnostic type
information.
(Not applicable to 2-slot chassis.)"
::= { mcrChassisGroup 2 }
mcrPsmuEntry OBJECT-TYPE
SYNTAX McrPsmuEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of the table, each relating to a separate PSMU."
INDEX { mcrChassisIndex, mcrPsmuIndex }
::= { mcrPsmuTable 1 }
McrPsmuEntry ::=
SEQUENCE {
mcrPsmuIndex INTEGER,
mcrPsmuModelName DisplayString,
mcrPsmuModelDesc DisplayString,
mcrPsmuPsuSerialNumber DisplayString,
mcrPsmuBootloaderVersion DisplayString,
mcrPsmuFirmwareVersion DisplayString,
mcrPsmuOutStandWarnAlarms Unsigned32,
mcrPsmuPsuStatus INTEGER,
mcrPsmuPsuVoltage DisplayString,
mcrPsmuPsuPowerUsage DisplayString,
mcrPsmuFanStatus INTEGER,
mcrPsmuFanSpeed Unsigned32
}
mcrPsmuIndex OBJECT-TYPE
SYNTAX INTEGER {
a(1),
b(2)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object identifies the PSMU bay as either A or B."
::= { mcrPsmuEntry 2 }
mcrPsmuModelName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the PSMU model."
::= { mcrPsmuEntry 3 }
mcrPsmuModelDesc OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies a static description of the power supply model
present in the chassis"
::= { mcrPsmuEntry 4 }
mcrPsmuPsuSerialNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the PSU serial number."
::= { mcrPsmuEntry 5 }
mcrPsmuBootloaderVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the PSMU bootloader version."
::= { mcrPsmuEntry 6 }
mcrPsmuFirmwareVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the PSMU firmware version."
::= { mcrPsmuEntry 7 }
mcrPsmuOutStandWarnAlarms OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the number of outstanding warnings and alarms for
this chassis. If this value is not zero then user intervention is needed
to resolve the outstanding warnings and alarms"
::= { mcrPsmuEntry 8 }
mcrPsmuPsuStatus OBJECT-TYPE
SYNTAX INTEGER {
notPresent(0),
good(1),
fail(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies if the PSMU power supply unit (PSU) status."
::= { mcrPsmuEntry 9 }
mcrPsmuPsuVoltage OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the current PSU voltage being supplied."
::= { mcrPsmuEntry 10 }
mcrPsmuPsuPowerUsage OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies power currently being supplied to the chassis,
in milliwatts. A value of 0 indicate that the power supply is
not in use"
::= { mcrPsmuEntry 11 }
mcrPsmuFanStatus OBJECT-TYPE
SYNTAX INTEGER {
notPresent(0),
good(1),
fail(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the fan status."
::= { mcrPsmuEntry 12 }
mcrPsmuFanSpeed OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the speed of the fan in RPM."
::= { mcrPsmuEntry 13 }
--
-- end of mcrPsmuTable
--
--
-- mcrChassisSlotTable
--
mcrChassisSlotTable OBJECT-TYPE
SYNTAX SEQUENCE OF McrChassisSlotEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of chassis slot configuration, status and diagnostic type
information."
::= { mcrChassisGroup 3 }
mcrChassisSlotEntry OBJECT-TYPE
SYNTAX McrChassisSlotEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of the table, each relating to a separate slot in a chassis."
INDEX { mcrChassisIndex, mcrChassisSlotIndex }
::= { mcrChassisSlotTable 1 }
McrChassisSlotEntry ::=
SEQUENCE {
mcrChassisSlotIndex SlotNumber,
mcrUserDefinedModuleName DisplayString,
mcrModuleModelName DisplayString,
mcrUnManagedModuleSlotName DisplayString,
mcrModuleSerialNumber DisplayString,
mcrModuleBootloaderVersion DisplayString,
mcrModuleFirmwareVersion DisplayString,
mcrModuleoOutStandWarnAlarms Unsigned32,
mcrModuleDiagStatus Integer32,
mcrModuleTypeInserted INTEGER,
mcrMediaConfigBackupRestore INTEGER,
mcrMediaBackedupModuleType INTEGER,
mcrChassisPwrUpSlotPwrState OnOffValue,
mcrCurrentPowerState OnOffValue,
mcrPowerScheduleEnable INTEGER,
mcrModuleReset INTEGER,
mcrModuleResetToFactory INTEGER,
mcrModuleModelDesc DisplayString
}
mcrChassisSlotIndex OBJECT-TYPE
SYNTAX SlotNumber
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object identifies the chassis slot number."
::= { mcrChassisSlotEntry 2 }
mcrUserDefinedModuleName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the user defined name of the module inserted
in the slot. The default name is the model name of the media converter module"
::= { mcrChassisSlotEntry 3 }
mcrModuleModelName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the model name of the module inserted
in the slot."
::= { mcrChassisSlotEntry 4 }
mcrUnManagedModuleSlotName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the user defined name for an unmanaged
module inserted in the slot. Unmanaged modules include all perle
C-1000, C-100, C-1110 and c-110 type modules."
::= { mcrChassisSlotEntry 5 }
mcrModuleSerialNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the serial number of the module inserted
in the slot."
::= { mcrChassisSlotEntry 6 }
mcrModuleBootloaderVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the bootloader version of the module inserted
in the slot."
::= { mcrChassisSlotEntry 7 }
mcrModuleFirmwareVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the firmware version of the module inserted
in the slot."
::= { mcrChassisSlotEntry 8 }
mcrModuleoOutStandWarnAlarms OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the number of outstanding warnings and alarms for
this module. If this value is not zero then user intervention is needed
to resolve the outstanding warnings and alarms"
::= { mcrChassisSlotEntry 9 }
mcrModuleDiagStatus OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the module's self-test diagnostics result. It will
return zero if it passed and non-zero error code if the module has
failed.The following are possible non-zero error codes:
1 - Media converter module's PHY is not functional.
2 - Firmware download required"
::= { mcrChassisSlotEntry 10 }
mcrModuleTypeInserted OBJECT-TYPE
SYNTAX INTEGER {
unManaged(-3),
mcrMgt(-2),
unknown(-1),
empty(0),
cm1000Fixed(1),
cm100Fixed(2),
cm1110RateConv(3),
cm110RateConv(4),
cm100mmFixed(5),
cm1000mmFixed(6),
cm10gFixed(7),
exCM(8),
cm10gt(9),
cm4gpt(10)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the module type inserted for this chassis slot."
::= { mcrChassisSlotEntry 11 }
mcrMediaConfigBackupRestore OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1),
notApplicable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is applicable to media converter modules only. It identifies
whether the media configuration will be automatically backed up to
or restored from the management card's non-volatile memory"
::= { mcrChassisSlotEntry 12 }
mcrMediaBackedupModuleType OBJECT-TYPE
SYNTAX INTEGER {
none(0),
cm1000Fixed(1),
cm100Fixed(2),
cm1110RateConv(3),
cm110RateConv(4),
cm100mmFixed(5),
cm1000mmFixed(6),
cm10gFixed(7),
exCM(8),
cm10gt(9),
cm4gpt(10)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the media converter module type of the configuration that
was backed up for the slot on the management card's non-volatile
memory when the mcrMediaConfigBackupRestore object was enabled. "
::= { mcrChassisSlotEntry 13 }
mcrChassisPwrUpSlotPwrState OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the default power state of the slot when the
chassis is initially powered up. The current power state of the slot
can be manually changed by writing to mcrCurrentPowerState object or
dynamically changed via slot power schedule configuration.
(Not applicable to 2-slot chassis.)"
::= { mcrChassisSlotEntry 14 }
mcrCurrentPowerState OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Writing this object allows the current power state of the slot to be
turned on or off. This object is not writable for management modules
or the 2-slot chassis.
Reading this object will return the current slot power state."
::= { mcrChassisSlotEntry 15 }
mcrPowerScheduleEnable OBJECT-TYPE
SYNTAX INTEGER {
no(0),
yes(1),
notApplicable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is not applicable to management modules. It identifies
if power schedule is enabled for the slot.
(Not applicable to 2-slot chassis.)"
::= { mcrChassisSlotEntry 16 }
mcrModuleReset OBJECT-TYPE
SYNTAX INTEGER {
no(0),
yes(1),
notApplicable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows you to reset the module inserted in the slot."
::= { mcrChassisSlotEntry 17 }
mcrModuleResetToFactory OBJECT-TYPE
SYNTAX INTEGER {
no(0),
yes(1),
notApplicable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows you to reset to factory the module inserted in
the slot. "
::= { mcrChassisSlotEntry 18 }
mcrModuleModelDesc OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies a static description of the media converter module present
in the slot."
::= { mcrChassisSlotEntry 19 }
--
-- end of mcrChassisSlotTable
--
--
-- mcrModuleTypes
--
mcrModuleTypes OBJECT IDENTIFIER
::= { mcrChassisGroup 4 }
--
-- cm1000Fixed - 1000 Mb fixed media Converter type modules
--
cm1000Fixed OBJECT IDENTIFIER ::= { mcrModuleTypes 1 }
--
-- cm1000FixedTable
--
cm1000FixedTable OBJECT-TYPE
SYNTAX SEQUENCE OF Cm1000FixedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of CM-1000 type media converter module's status type information."
::= { cm1000Fixed 1 }
cm1000FixedEntry OBJECT-TYPE
SYNTAX Cm1000FixedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of the table, each relating to a separate CM-1000 type
media converter module."
INDEX { mcrChassisIndex, cm1000SlotIndex }
::= { cm1000FixedTable 1 }
Cm1000FixedEntry ::=
SEQUENCE {
cm1000SlotIndex SlotNumber,
cm1000Modelname DisplayString,
cm1000ModelDesc DisplayString,
cm1000HwJmp5ConfigMode INTEGER,
cm1000HwSw1FiberAutoNeg INTEGER,
cm1000HwSw2LinkMode INTEGER,
cm1000HwSw3FiberFaultAlert INTEGER,
cm1000HwSw4Duplex INTEGER,
cm1000HwSw5Pause INTEGER,
cm1000HwSw6Loopback INTEGER,
cm1000FiberLinkStatus INTEGER,
cm1000FiberConnType INTEGER,
cm1000FiberAutoNegState INTEGER,
cm1000FiberSpeed INTEGER,
cm1000FiberDuplex INTEGER,
cm1000FiberPauseEnh INTEGER,
cm1000FiberLPRFStatus INTEGER,
cm1000FiberReceiveStatus INTEGER,
cm1000FiberLoopBack EnableDisableValue,
cm1000CopperLinkStatus INTEGER,
cm1000CopperConnType INTEGER,
cm1000CopperAutoNegState INTEGER,
cm1000CopperSpeed INTEGER,
cm1000CopperDuplex INTEGER,
cm1000CopperCrossOver INTEGER,
cm1000CopperPauseEnh INTEGER,
cm1000CopperLPRFStatus INTEGER
}
cm1000SlotIndex OBJECT-TYPE
SYNTAX SlotNumber
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Slot number the CM-1000 type module is currently inserted"
::= { cm1000FixedEntry 2 }
cm1000Modelname OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the model of media converter module present in the
chassis"
::= { cm1000FixedEntry 3 }
cm1000ModelDesc OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies a static description of the media converter module present
in the chassis"
::= { cm1000FixedEntry 4 }
cm1000HwJmp5ConfigMode OBJECT-TYPE
SYNTAX INTEGER {
hardwareSwitches(0),
auto(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the media converter module's ConfigMode, set by hardware
jumper J5 on the media converter module. When this object is set to
hardwareSwitches(0), the media converter module will disable configuration
control from the management module's software and all configuration
control comes from the media converter module's hardware switches or jumpers. "
::= { cm1000FixedEntry 5 }
cm1000HwSw1FiberAutoNeg OBJECT-TYPE
SYNTAX INTEGER{
swDownDisabled(0),
swUpEnabled(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current switch setting for fiber Auto-Negotiation."
::= { cm1000FixedEntry 6 }
cm1000HwSw2LinkMode OBJECT-TYPE
SYNTAX INTEGER {
swDownSmartLinkPassthrough(0),
swUpStandard(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current switch setting for Link Mode."
::= { cm1000FixedEntry 7 }
cm1000HwSw3FiberFaultAlert OBJECT-TYPE
SYNTAX INTEGER {
swDownDisabled(0),
swUpEnabled(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current switch setting for Fiber Fault Alert."
::= { cm1000FixedEntry 8 }
cm1000HwSw4Duplex OBJECT-TYPE
SYNTAX INTEGER {
swDownHalf(0),
swUpAuto(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current switch setting for copper duplex."
::= { cm1000FixedEntry 9 }
cm1000HwSw5Pause OBJECT-TYPE
SYNTAX INTEGER {
swDownDisabled(0),
swUpEnabled(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current switch setting for copper pause (flow control)."
::= { cm1000FixedEntry 10 }
cm1000HwSw6Loopback OBJECT-TYPE
SYNTAX INTEGER {
swDownEnabled(0),
swUpDisabled(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current switch setting for fiber loopback mode."
::= { cm1000FixedEntry 11 }
cm1000FiberLinkStatus OBJECT-TYPE
SYNTAX INTEGER {
down(0),
up(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current fiber link status."
::= { cm1000FixedEntry 12 }
cm1000FiberConnType OBJECT-TYPE
SYNTAX INTEGER {
sc(0),
lc(1),
st(2),
sfp(3),
fc(5),
mtrj(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's fiber port connector type."
::= { cm1000FixedEntry 13 }
cm1000FiberAutoNegState OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
complete(1),
inProgress(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current fiber auto-negotiation state."
::= { cm1000FixedEntry 14 }
cm1000FiberSpeed OBJECT-TYPE
SYNTAX INTEGER {
speed1000Mbps(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's fiber port speed in megabits per second."
::= { cm1000FixedEntry 15 }
cm1000FiberDuplex OBJECT-TYPE
SYNTAX INTEGER {
half(0),
full(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If fiber auto-negotiation state is complete then this object
indicates the media converter module's current fiber auto-negotiated duplex
setting. If auto-negotiation is not complete then the value returned should be
ignored."
::= { cm1000FixedEntry 16 }
cm1000FiberPauseEnh OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
symmetrical(1),
asymmetricalTx(2),
asymmetricalRx(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If fiber auto-negotiation state is complete then this object indicates
the media converter module's current fiber auto-negotiated pause setting. If
auto-negotiation is not complete then the value returned should be ignored."
::= { cm1000FixedEntry 17 }
cm1000FiberLPRFStatus OBJECT-TYPE
SYNTAX INTEGER {
ok(0),
offline(1),
linkFault(2),
autoNegError(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's fiber Link Partner Remote Fault status."
::= { cm1000FixedEntry 18 }
cm1000FiberReceiveStatus OBJECT-TYPE
SYNTAX INTEGER {
fault(0),
ok(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the status of whether light is being received
on the fiber port"
::= { cm1000FixedEntry 19 }
cm1000FiberLoopBack OBJECT-TYPE
SYNTAX EnableDisableValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Media converter module's current fiber loopback mode setting. Writing to this
object will change the current settings. This object is read-only if
the media converter module's ConfigMode jumper is set to hardwareSwitches(0)."
::= { cm1000FixedEntry 20 }
cm1000CopperLinkStatus OBJECT-TYPE
SYNTAX INTEGER {
down(0),
up(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current copper link status."
::= { cm1000FixedEntry 21 }
cm1000CopperConnType OBJECT-TYPE
SYNTAX INTEGER {
rj45(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's copper connector type."
::= { cm1000FixedEntry 22 }
cm1000CopperAutoNegState OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
complete(1),
inProgress(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current copper auto-negotiation state."
::= { cm1000FixedEntry 23 }
cm1000CopperSpeed OBJECT-TYPE
SYNTAX INTEGER {
speed1000Mbps(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's copper port speed in megabits per second."
::= { cm1000FixedEntry 24 }
cm1000CopperDuplex OBJECT-TYPE
SYNTAX INTEGER {
half(0),
full(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If copper auto-negotiation state is complete then this object
indicates the media converter module's current copper auto-negotiated duplex
setting. If auto-negotiation is not complete then the value returned
should be ignored."
::= { cm1000FixedEntry 25 }
cm1000CopperCrossOver OBJECT-TYPE
SYNTAX INTEGER {
mdi(0),
mdix(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If copper auto-negotiation state is complete then this object
indicates the media converter module's current copper auto-negotiated MDI/MDI-X
setting. If auto-negotiation is not complete then the value returned
should be ignored."
::= { cm1000FixedEntry 26 }
cm1000CopperPauseEnh OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
symmetrical(1),
asymmetricalTx(2),
asymmetricalRx(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If copper auto-negotiation state is complete then this object indicates
the media converter module's current copper auto-negotiated pause setting. If
auto-negotiation is not complete then the value returned should be ignored."
::= { cm1000FixedEntry 27 }
cm1000CopperLPRFStatus OBJECT-TYPE
SYNTAX INTEGER {
ok(0),
remoteFault(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's copper Link Partner Remote Fault status."
::= { cm1000FixedEntry 28 }
--
-- cm1000FixedTable
--
--
-- cm1000ConfigTable
--
cm1000ConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF Cm1000ConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of CM-1000 type media converter module's configuration type information."
::= { cm1000Fixed 2 }
cm1000ConfigEntry OBJECT-TYPE
SYNTAX Cm1000ConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of the table, each relating to a separate CM-1000 type
media converter module."
INDEX { mcrChassisIndex, cm1000ConfigSlotIndex }
::= { cm1000ConfigTable 1 }
Cm1000ConfigEntry ::=
SEQUENCE {
cm1000ConfigSlotIndex SlotNumber,
cm1000ConfigStatus ContainerStatus,
cm1000ConfigModuleName DisplayString,
cm1000ConfigLinkMode INTEGER,
cm1000ConfigFiberFaultAlert EnableDisableValue,
cm1000ConfigJumboPackets EnableDisableValue,
cm1000ConfigFiberPortName DisplayString,
cm1000ConfigFiberPortEnable YesNoValue,
cm1000ConfigFiberAutoNeg EnableDisableValue,
cm1000ConfigCopperPortName DisplayString,
cm1000ConfigCopperPortEnable YesNoValue,
cm1000ConfigCopperDuplex INTEGER,
cm1000ConfigCopperPauseEnh INTEGER,
cm1000ConfigCopperLowPower OnOffValue
}
cm1000ConfigSlotIndex OBJECT-TYPE
SYNTAX SlotNumber
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Slot number the CM-1000 type module is currently inserted"
::= { cm1000ConfigEntry 2 }
cm1000ConfigStatus OBJECT-TYPE
SYNTAX ContainerStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When you perform a GET on this variable, one of
the following values will be returned:
1-Indicates that the container folder is active with no changes.
2-Indicates that the container folder is active with change(s).
Once you have completed setting the variables in a folder, you
will want to submit your changes to the management module. To do
this, set the Status variable to 4. If you want to discard the
changes, set the Status variable to 6.
4-Indicates that the changes in the container folder are to be
submitted to the management module, verified and and saved to flash.
6-Indicates that the changes in the container folder are to be
discarded."
::= { cm1000ConfigEntry 3 }
cm1000ConfigModuleName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..63))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies a user configurable name for the media converter module
present in the chassis. "
::= { cm1000ConfigEntry 4 }
cm1000ConfigLinkMode OBJECT-TYPE
SYNTAX INTEGER {
standard(0),
smartLinkPassthrough(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the Link Mode for the media converter module. This object
is read-only if the media converter module's ConfigMode jumper is set to
hardwareSwitches(0)."
::= { cm1000ConfigEntry 5 }
cm1000ConfigFiberFaultAlert OBJECT-TYPE
SYNTAX EnableDisableValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the Fiber Fault Alert setting for the media
module. This object is read-only if the media converter module's ConfigMode
jumper is set to hardwareSwitches(0). "
::= { cm1000ConfigEntry 6 }
cm1000ConfigJumboPackets OBJECT-TYPE
SYNTAX EnableDisableValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the Jumbo Packet setting for the media converter module
present in the chassis. "
::= { cm1000ConfigEntry 7 }
cm1000ConfigFiberPortName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..8))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies a user definable name for the fiber port."
::= { cm1000ConfigEntry 8 }
cm1000ConfigFiberPortEnable OBJECT-TYPE
SYNTAX YesNoValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies whether the fiber port is enabled. "
::= { cm1000ConfigEntry 9 }
cm1000ConfigFiberAutoNeg OBJECT-TYPE
SYNTAX EnableDisableValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the wither fiber auto-negotiation is
enabled. This object is read-only if the media converter module's ConfigMode
jumper is set to hardwareSwitches(0)."
::= { cm1000ConfigEntry 10 }
cm1000ConfigCopperPortName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..8))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies a user definable name for the copper port. "
::= { cm1000ConfigEntry 11 }
cm1000ConfigCopperPortEnable OBJECT-TYPE
SYNTAX YesNoValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies whether the fiber port is enabled. "
::= { cm1000ConfigEntry 12 }
cm1000ConfigCopperDuplex OBJECT-TYPE
SYNTAX INTEGER {
half(1),
auto(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the duplex settings for the copper port.
This object is read-only if the media converter module's ConfigMode jumper
is set to hardwareSwitches(0)."
::= { cm1000ConfigEntry 13 }
cm1000ConfigCopperPauseEnh OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
symmetrical(1),
asymmetricalTx(2),
symmAsymRx(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the copper pause (flow control) setting that
is a advertised. The settings can be disabled, advertise symmetrical,
advertise asymmetrical TX or advertise symmetrical and asymmetrical
RX. This object is read-only if the media converter module's ConfigMode jumper
is set to hardwareSwitches(0)."
::= { cm1000ConfigEntry 14 }
cm1000ConfigCopperLowPower OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the copper low power setting for the media converter module
present in the chassis. "
::= { cm1000ConfigEntry 15 }
--
-- cm1000ConfigTable
--
--
-- cm1000LedTable
--
cm1000LedTable OBJECT-TYPE
SYNTAX SEQUENCE OF Cm1000LedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of CM-1000 type media converter module's LED status information."
::= { cm1000Fixed 3 }
cm1000LedEntry OBJECT-TYPE
SYNTAX Cm1000LedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of the table, each relating to a separate CM-1000 type
media converter module."
INDEX { mcrChassisIndex, cm1000LedSlotIndex }
::= { cm1000LedTable 1 }
Cm1000LedEntry ::=
SEQUENCE {
cm1000LedSlotIndex SlotNumber,
cm1000LedPWR INTEGER,
cm1000LedLKF INTEGER,
cm1000LedLKC INTEGER
}
cm1000LedSlotIndex OBJECT-TYPE
SYNTAX SlotNumber
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Slot number the CM-1000 type module is currently inserted"
::= { cm1000LedEntry 2 }
cm1000LedPWR OBJECT-TYPE
SYNTAX INTEGER {
off(0),
onGreen(1),
blinking(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the status of the power (PWR) LED on the media converter module.
Possible status values are:
off(0) - No power to the module
onGreen(1) - Power being applied to module
blinking(2) - Fiber loopback enabled"
::= { cm1000LedEntry 3 }
cm1000LedLKF OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the status of the link copper (LKC) LED on the
media converter module.
Possible status values are:
off(0) - No fiber link
on(1) - Fiber link present"
::= { cm1000LedEntry 4 }
cm1000LedLKC OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the status of the link copper (LKC) LED on the
media converter module.
Possible status values are:
off(0) - No copper link
on(1) - Copper link present"
::= { cm1000LedEntry 5 }
--
-- end of cm1000LedTable
--
--
-- end of cm1000Fixed
--
-- cm1000mmFixed - 1000 Mb fixed media Converter type modules
--
cm1000mmFixed OBJECT IDENTIFIER ::= { mcrModuleTypes 6 }
--
-- cm1000mmFixedTable
--
cm1000mmFixedTable OBJECT-TYPE
SYNTAX SEQUENCE OF Cm1000mmFixedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of CM-1000MM type media converter module's status type information."
::= { cm1000mmFixed 1 }
cm1000mmFixedEntry OBJECT-TYPE
SYNTAX Cm1000mmFixedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of the table, each relating to a separate CM-1000MM type
media converter module."
INDEX { mcrChassisIndex, cm1000mmSlotIndex }
::= { cm1000mmFixedTable 1 }
Cm1000mmFixedEntry ::=
SEQUENCE {
cm1000mmSlotIndex SlotNumber,
cm1000mmModelname DisplayString,
cm1000mmModelDesc DisplayString,
cm1000mmHwJmp5ConfigMode INTEGER,
cm1000mmHwSw1FiberAutoNeg INTEGER,
cm1000mmHwSw2LinkMode INTEGER,
cm1000mmHwSw3FiberFaultAlert INTEGER,
cm1000mmHwSw4Loopback1 INTEGER,
cm1000mmHwSw5Loopback2 INTEGER,
cm1000mmFiber1LinkStatus INTEGER,
cm1000mmFiber1ConnType INTEGER,
cm1000mmFiber1AutoNegState INTEGER,
cm1000mmFiber1Speed INTEGER,
cm1000mmFiber1Duplex INTEGER,
cm1000mmFiber1PauseEnh INTEGER,
cm1000mmFiber1LPRFStatus INTEGER,
cm1000mmFiber1ReceiveStatus INTEGER,
cm1000mmFiber2LinkStatus INTEGER,
cm1000mmFiber2ConnType INTEGER,
cm1000mmFiber2AutoNegState INTEGER,
cm1000mmFiber2Speed INTEGER,
cm1000mmFiber2Duplex INTEGER,
cm1000mmFiber2PauseEnh INTEGER,
cm1000mmFiber2LPRFStatus INTEGER,
cm1000mmFiber2ReceiveStatus INTEGER,
cm1000mmFiberLoopBack INTEGER
}
cm1000mmSlotIndex OBJECT-TYPE
SYNTAX SlotNumber
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Slot number the CM-1000MM type module is currently inserted"
::= { cm1000mmFixedEntry 2 }
cm1000mmModelname OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the model of media converter module present in the
chassis"
::= { cm1000mmFixedEntry 3 }
cm1000mmModelDesc OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies a static description of the media converter module present
in the chassis"
::= { cm1000mmFixedEntry 4 }
cm1000mmHwJmp5ConfigMode OBJECT-TYPE
SYNTAX INTEGER {
hardwareSwitches(0),
auto(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the media converter module's ConfigMode, set by hardware
jumper J5 on the media converter module. When this object is set to
hardwareSwitches(0), the media converter module will disable configuration
control from the management module's software and all configuration
control comes from the media converter module's hardware switches or jumpers. "
::= { cm1000mmFixedEntry 5 }
cm1000mmHwSw1FiberAutoNeg OBJECT-TYPE
SYNTAX INTEGER{
swDownDisabled(0),
swUpEnabled(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current switch setting for fiber Auto-Negotiation."
::= { cm1000mmFixedEntry 6 }
cm1000mmHwSw2LinkMode OBJECT-TYPE
SYNTAX INTEGER {
swDownSmartLinkPassthrough(0),
swUpStandard(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current switch setting for Link Mode."
::= { cm1000mmFixedEntry 7 }
cm1000mmHwSw3FiberFaultAlert OBJECT-TYPE
SYNTAX INTEGER {
swDownDisabled(0),
swUpEnabled(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current switch setting for Fiber Fault Alert."
::= { cm1000mmFixedEntry 8 }
cm1000mmHwSw4Loopback1 OBJECT-TYPE
SYNTAX INTEGER {
swDownEnabled(0),
swUpDisabled(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current switch setting for loopback (fiber port 1)."
::= { cm1000mmFixedEntry 9 }
cm1000mmHwSw5Loopback2 OBJECT-TYPE
SYNTAX INTEGER {
swDownEnabled(0),
swUpDisabled(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current switch setting for loopback (fiber port 2)."
::= { cm1000mmFixedEntry 10 }
cm1000mmFiber1LinkStatus OBJECT-TYPE
SYNTAX INTEGER {
down(0),
up(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current fiber link status (port 1)."
::= { cm1000mmFixedEntry 12 }
cm1000mmFiber1ConnType OBJECT-TYPE
SYNTAX INTEGER {
sc(0),
lc(1),
st(2),
sfp(3),
fc(5),
mtrj(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's fiber port connector type (port 1)."
::= { cm1000mmFixedEntry 13 }
cm1000mmFiber1AutoNegState OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
complete(1),
inProgress(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current fiber auto-negotiation state (port 1)."
::= { cm1000mmFixedEntry 14 }
cm1000mmFiber1Speed OBJECT-TYPE
SYNTAX INTEGER {
speed1000Mbps(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's fiber port speed in megabits per second (port 1)."
::= { cm1000mmFixedEntry 15 }
cm1000mmFiber1Duplex OBJECT-TYPE
SYNTAX INTEGER {
half(0),
full(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If fiber auto-negotiation state is complete then this object
indicates the media converter module's current fiber auto-negotiated duplex
setting. If auto-negotiation is not complete then the value returned should be
ignored. (Port 1)"
::= { cm1000mmFixedEntry 16 }
cm1000mmFiber1PauseEnh OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
symmetrical(1),
asymmetricalTx(2),
asymmetricalRx(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If fiber auto-negotiation state is complete then this object indicates
the media converter module's current fiber auto-negotiated pause setting. If
auto-negotiation is not complete then the value returned should be ignored.
(Port 1)"
::= { cm1000mmFixedEntry 17 }
cm1000mmFiber1LPRFStatus OBJECT-TYPE
SYNTAX INTEGER {
ok(0),
offline(1),
linkFault(2),
autoNegError(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's fiber Link Partner Remote Fault status (port 1)."
::= { cm1000mmFixedEntry 18 }
cm1000mmFiber1ReceiveStatus OBJECT-TYPE
SYNTAX INTEGER {
fault(0),
ok(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the status of whether light is being received
on the fiber port (port 1)"
::= { cm1000mmFixedEntry 19 }
cm1000mmFiber2LinkStatus OBJECT-TYPE
SYNTAX INTEGER {
down(0),
up(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current fiber link status (port 2)."
::= { cm1000mmFixedEntry 20 }
cm1000mmFiber2ConnType OBJECT-TYPE
SYNTAX INTEGER {
sc(0),
lc(1),
st(2),
sfp(3),
fc(5),
mtrj(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's fiber port connector type (port 2)."
::= { cm1000mmFixedEntry 21 }
cm1000mmFiber2AutoNegState OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
complete(1),
inProgress(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current fiber auto-negotiation state (port 2)."
::= { cm1000mmFixedEntry 22 }
cm1000mmFiber2Speed OBJECT-TYPE
SYNTAX INTEGER {
speed1000Mbps(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's fiber port speed in megabits per second (port 2)."
::= { cm1000mmFixedEntry 23 }
cm1000mmFiber2Duplex OBJECT-TYPE
SYNTAX INTEGER {
half(0),
full(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If fiber auto-negotiation state is complete then this object
indicates the media converter module's current fiber auto-negotiated duplex
setting. If auto-negotiation is not complete then the value returned should be
ignored. (Port 2)"
::= { cm1000mmFixedEntry 24 }
cm1000mmFiber2PauseEnh OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
symmetrical(1),
asymmetricalTx(2),
asymmetricalRx(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If fiber auto-negotiation state is complete then this object indicates
the media converter module's current fiber auto-negotiated pause setting. If
auto-negotiation is not complete then the value returned should be ignored.
(Port 2)"
::= { cm1000mmFixedEntry 25 }
cm1000mmFiber2LPRFStatus OBJECT-TYPE
SYNTAX INTEGER {
ok(0),
offline(1),
linkFault(2),
autoNegError(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's fiber Link Partner Remote Fault status (port 2)."
::= { cm1000mmFixedEntry 26 }
cm1000mmFiber2ReceiveStatus OBJECT-TYPE
SYNTAX INTEGER {
fault(0),
ok(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the status of whether light is being received
on the fiber port (port 2)"
::= { cm1000mmFixedEntry 27 }
cm1000mmFiberLoopBack OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
port1(1),
port2(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Media converter module's current fiber loopback mode setting. Writing to this
object will change the current settings. This object is read-only if
the media converter module's ConfigMode jumper is set to hardwareSwitches(0)."
::= { cm1000mmFixedEntry 28 }
--
-- cm1000mmFixedTable
--
--
-- cm1000mmConfigTable
--
cm1000mmConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF Cm1000mmConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of CM-1000MM type media converter module's configuration type information."
::= { cm1000mmFixed 2 }
cm1000mmConfigEntry OBJECT-TYPE
SYNTAX Cm1000mmConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of the table, each relating to a separate CM-1000MM type
media converter module."
INDEX { mcrChassisIndex, cm1000mmConfigSlotIndex }
::= { cm1000mmConfigTable 1 }
Cm1000mmConfigEntry ::=
SEQUENCE {
cm1000mmConfigSlotIndex SlotNumber,
cm1000mmConfigStatus ContainerStatus,
cm1000mmConfigModuleName DisplayString,
cm1000mmConfigLinkMode INTEGER,
cm1000mmConfigFiberFaultAlert EnableDisableValue,
cm1000mmConfigJumboPackets EnableDisableValue,
cm1000mmConfigFiberAutoNeg EnableDisableValue,
cm1000mmConfigFiber1PortName DisplayString,
cm1000mmConfigFiber1PortEnable YesNoValue,
cm1000mmConfigFiber2PortName DisplayString,
cm1000mmConfigFiber2PortEnable YesNoValue
}
cm1000mmConfigSlotIndex OBJECT-TYPE
SYNTAX SlotNumber
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Slot number the CM-1000MM type module is currently inserted"
::= { cm1000mmConfigEntry 2 }
cm1000mmConfigStatus OBJECT-TYPE
SYNTAX ContainerStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When you perform a GET on this variable, one of
the following values will be returned:
1-Indicates that the container folder is active with no changes.
2-Indicates that the container folder is active with change(s).
Once you have completed setting the variables in a folder, you
will want to submit your changes to the management module. To do
this, set the Status variable to 4. If you want to discard the
changes, set the Status variable to 6.
4-Indicates that the changes in the container folder are to be
submitted to the management module, verified and and saved to flash.
6-Indicates that the changes in the container folder are to be
discarded."
::= { cm1000mmConfigEntry 3 }
cm1000mmConfigModuleName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..63))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies a user configurable name for the media converter module
present in the chassis. "
::= { cm1000mmConfigEntry 4 }
cm1000mmConfigLinkMode OBJECT-TYPE
SYNTAX INTEGER {
standard(0),
smartLinkPassthrough(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the Link Mode for the media converter module. This object
is read-only if the media converter module's ConfigMode jumper is set to
hardwareSwitches(0)."
::= { cm1000mmConfigEntry 5 }
cm1000mmConfigFiberFaultAlert OBJECT-TYPE
SYNTAX EnableDisableValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the Fiber Fault Alert setting for the media
module. This object is read-only if the media converter module's ConfigMode
jumper is set to hardwareSwitches(0). "
::= { cm1000mmConfigEntry 6 }
cm1000mmConfigJumboPackets OBJECT-TYPE
SYNTAX EnableDisableValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the Jumbo Packet setting for the media converter module
present in the chassis. "
::= { cm1000mmConfigEntry 7 }
cm1000mmConfigFiberAutoNeg OBJECT-TYPE
SYNTAX EnableDisableValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the wither fiber auto-negotiation is
enabled for both ports. This object is read-only if the media
module's ConfigMode jumper is set to hardwareSwitches(0)."
::= { cm1000mmConfigEntry 8 }
cm1000mmConfigFiber1PortName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..8))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies a user definable name for the fiber port (port 1)."
::= { cm1000mmConfigEntry 9 }
cm1000mmConfigFiber1PortEnable OBJECT-TYPE
SYNTAX YesNoValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies whether the fiber port is enabled (port 1)."
::= { cm1000mmConfigEntry 10 }
cm1000mmConfigFiber2PortName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..8))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies a user definable name for the fiber port (port 2)."
::= { cm1000mmConfigEntry 11 }
cm1000mmConfigFiber2PortEnable OBJECT-TYPE
SYNTAX YesNoValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies whether the fiber port is enabled (port 2)."
::= { cm1000mmConfigEntry 12 }
--
-- cm1000mmConfigTable
--
--
-- cm1000mmLedTable
--
cm1000mmLedTable OBJECT-TYPE
SYNTAX SEQUENCE OF Cm1000mmLedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of CM-1000MM type media converter module's LED status information."
::= { cm1000mmFixed 3 }
cm1000mmLedEntry OBJECT-TYPE
SYNTAX Cm1000mmLedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of the table, each relating to a separate CM-1000MM type
media converter module."
INDEX { mcrChassisIndex, cm1000mmLedsSlotIndex }
::= { cm1000mmLedTable 1 }
Cm1000mmLedEntry ::=
SEQUENCE {
cm1000mmLedsSlotIndex SlotNumber,
cm1000mmLedPWR INTEGER,
cm1000mmLedLK1 INTEGER,
cm1000mmLedLK2 INTEGER
}
cm1000mmLedsSlotIndex OBJECT-TYPE
SYNTAX SlotNumber
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Slot number the CM-1000 type module is currently inserted"
::= { cm1000mmLedEntry 2 }
cm1000mmLedPWR OBJECT-TYPE
SYNTAX INTEGER {
off(0),
onGreen(1),
blinking(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the status of the power (PWR) LED on the media converter module.
Possible status values are:
off(0) - No power to the module
onGreen(1) - Power being applied to module
blinking(2) - Fiber loopback enabled"
::= { cm1000mmLedEntry 3 }
cm1000mmLedLK1 OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the status of the link fiber port 1 (LK1) LED on the
media converter module.
Possible status values are:
off(0) - No fiber link
on(1) - Fiber link present"
::= { cm1000mmLedEntry 4 }
cm1000mmLedLK2 OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the status of the link fiber port 2 (LK2) LED on the
media converter module.
Possible status values are:
off(0) - No fiber link
on(1) - Fiber link present"
::= { cm1000mmLedEntry 5 }
--
-- end of cm1000mmLedTable
--
--
-- end of cm1000mmFixed
--
-- cm100Fixed - 100 Mb fixed media Converter type modules
--
cm100Fixed OBJECT IDENTIFIER ::= { mcrModuleTypes 2 }
--
-- cm100FixedTable
--
cm100FixedTable OBJECT-TYPE
SYNTAX SEQUENCE OF Cm100FixedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of CM-100 type media converter module's configuration and status type
information."
::= { cm100Fixed 1 }
cm100FixedEntry OBJECT-TYPE
SYNTAX Cm100FixedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of the table, each relating to a separate CM-1000 type
media converter module."
INDEX { mcrChassisIndex, cm100SlotIndex }
::= { cm100FixedTable 1 }
Cm100FixedEntry ::=
SEQUENCE {
cm100SlotIndex SlotNumber,
cm100ModelName DisplayString,
cm100ModelDesc DisplayString,
cm100HwJmp5ConfigMode INTEGER,
cm100HwJmp6AutoMDI INTEGER,
cm100HwSw1AutoNegotiation INTEGER,
cm100HwSw2LinkMode INTEGER,
cm100HwSw3FarEndFault INTEGER,
cm100HwSw5Pause INTEGER,
cm100HwSw6Loopback INTEGER,
cm100FiberLinkStatus INTEGER,
cm100FiberConnType INTEGER,
cm100FiberSpeed INTEGER,
cm100FiberFarEndFault INTEGER,
cm100FiberReceiveStatus INTEGER,
cm100FiberLoopBack EnableDisableValue,
cm100CopperLinkStatus INTEGER,
cm100CopperConnType INTEGER,
cm100CopperAutoNegState INTEGER,
cm100CopperSpeed INTEGER,
cm100CopperDuplex INTEGER,
cm100CopperCrossOver INTEGER,
cm100CopperPause INTEGER,
cm100CopperLPRFStatus INTEGER
}
cm100SlotIndex OBJECT-TYPE
SYNTAX SlotNumber
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Slot number the CM-100 type module is currently inserted"
::= { cm100FixedEntry 2 }
cm100ModelName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the model of media converter module present in the
chassis"
::= { cm100FixedEntry 3 }
cm100ModelDesc OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies a static description of the media converter module present
in the chassis"
::= { cm100FixedEntry 4 }
cm100HwJmp5ConfigMode OBJECT-TYPE
SYNTAX INTEGER {
hardwareSwitches(0),
auto(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the media converter module's ConfigMode, set by hardware
switch on the media converter module. When this object is set to hardwareSwitches(0), the
media converter module will disable configuration control from the management
module's software and all configuration control comes from the media
module's hardware switches or jumpers. "
::= { cm100FixedEntry 5 }
cm100HwJmp6AutoMDI OBJECT-TYPE
SYNTAX INTEGER {
mdi(0),
auto(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the media converter module's hardware Auto MDIX jumper
settings. "
::= { cm100FixedEntry 6 }
cm100HwSw1AutoNegotiation OBJECT-TYPE
SYNTAX INTEGER {
swDownDisabled(0),
swUpEnabled(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current switch setting for fiber Auto-Negotiation."
::= { cm100FixedEntry 7 }
cm100HwSw2LinkMode OBJECT-TYPE
SYNTAX INTEGER {
swDownStandardMode(0),
swUpLinkPassthroughMode(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current switch setting for Link Mode."
::= { cm100FixedEntry 8 }
cm100HwSw3FarEndFault OBJECT-TYPE
SYNTAX INTEGER {
swDownDisabled(0),
swUpEnabled(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current switch setting for Far End Fault."
::= { cm100FixedEntry 9 }
-- cm100HwSw4 unused switch
cm100HwSw5Pause OBJECT-TYPE
SYNTAX INTEGER {
swDownDisabled(0),
swUpEnabled(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current switch setting for copper pause (flow control)."
::= { cm100FixedEntry 10 }
cm100HwSw6Loopback OBJECT-TYPE
SYNTAX INTEGER {
swDownEnabled(0),
swUpDisabled(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current switch setting for fiber loopback mode."
::= { cm100FixedEntry 11 }
cm100FiberLinkStatus OBJECT-TYPE
SYNTAX INTEGER {
down(0),
up(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current fiber link status."
::= { cm100FixedEntry 12 }
cm100FiberConnType OBJECT-TYPE
SYNTAX INTEGER {
sc(0),
lc(1),
st(2),
sfp(3),
fc(5),
mtrj(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's fiber port connector type."
::= { cm100FixedEntry 13 }
cm100FiberSpeed OBJECT-TYPE
SYNTAX INTEGER {
speed100Mbps(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's fiber port speed in megabits per second."
::= { cm100FixedEntry 14 }
cm100FiberFarEndFault OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
ok(1),
receivingFEF(2),
sendingFEF(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current fiber Far End Fault status."
::= { cm100FixedEntry 15 }
cm100FiberReceiveStatus OBJECT-TYPE
SYNTAX INTEGER {
fault(0),
ok(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the status of whether light is being received
on the fiber port"
::= { cm100FixedEntry 16 }
cm100FiberLoopBack OBJECT-TYPE
SYNTAX EnableDisableValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
This object is read-only if the media converter module's ConfigMode jumper is
set to hardwareSwitches(0)."
::= { cm100FixedEntry 17 }
cm100CopperLinkStatus OBJECT-TYPE
SYNTAX INTEGER {
down(0),
up(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current copper link status."
::= { cm100FixedEntry 18 }
cm100CopperConnType OBJECT-TYPE
SYNTAX INTEGER {
rj45(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's copper connector type."
::= { cm100FixedEntry 19 }
cm100CopperAutoNegState OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
complete(1),
inProgress(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current copper auto-negotiation state."
::= { cm100FixedEntry 20 }
cm100CopperSpeed OBJECT-TYPE
SYNTAX INTEGER {
speed100Mbps(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the copper port speed in megabits per second."
::= { cm100FixedEntry 21 }
cm100CopperDuplex OBJECT-TYPE
SYNTAX INTEGER {
half(0),
full(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If copper auto-negotiation state is complete then this object
indicates the media converter module's current copper auto-negotiated duplex
setting. If auto-negotiation is not complete then the value returned
should be ignored."
::= { cm100FixedEntry 22 }
cm100CopperCrossOver OBJECT-TYPE
SYNTAX INTEGER {
mdi(0),
mdix(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If copper auto-negotiation state is complete then this object
indicates the media converter module's current copper auto-negotiated MDI/MDI-X
setting. If auto-negotiation is not complete then the value returned
should be ignored."
::= { cm100FixedEntry 23 }
cm100CopperPause OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
symmetrical(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If copper auto-negotiation state is complete then this object indicates
the media converter module's current copper auto-negotiated pause (flow control)
setting. If auto-negotiation is not complete then the value returned
should be ignored."
::= { cm100FixedEntry 24 }
cm100CopperLPRFStatus OBJECT-TYPE
SYNTAX INTEGER {
ok(0),
remoteFault(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's copper Link Partner Remote Fault status."
::= { cm100FixedEntry 25}
--
-- end of cm100FixedTable
--
--
-- cm100ConfigTable
--
cm100ConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF Cm100ConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of CM-100 type media converter module's configuration and status type
information."
::= { cm100Fixed 2 }
cm100ConfigEntry OBJECT-TYPE
SYNTAX Cm100ConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of the table, each relating to a separate CM-1000 type
media converter module."
INDEX { mcrChassisIndex, cm100ConfigSlotIndex }
::= { cm100ConfigTable 1 }
Cm100ConfigEntry ::=
SEQUENCE {
cm100ConfigSlotIndex SlotNumber,
cm100ConfigStatus ContainerStatus,
cm100ConfigModuleName DisplayString,
cm100ConfigLinkMode INTEGER,
cm100ConfigFiberFarEndFault EnableDisableValue,
cm100ConfigFiberPortName DisplayString,
cm100ConfigFiberPortEnable YesNoValue,
cm100ConfigCopperPortName DisplayString,
cm100ConfigCopperPortEnable YesNoValue,
cm100ConfigCopperAutoNegotiation EnableDisableValue,
cm100ConfigCopperCrossOver INTEGER,
cm100ConfigCopperPause INTEGER
}
cm100ConfigSlotIndex OBJECT-TYPE
SYNTAX SlotNumber
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Slot number the CM-1000 type module is currently inserted"
::= { cm100ConfigEntry 2 }
cm100ConfigStatus OBJECT-TYPE
SYNTAX ContainerStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When you perform a GET on this variable, one of
the following values will be returned:
1-Indicates that the container folder is active with no changes.
2-Indicates that the container folder is active with change(s).
Once you have completed setting the variables in a folder, you
will want to submit your changes to the management module. To do
this, set the Status variable to 4. If you want to discard the
changes, set the Status variable to 6.
4-Indicates that the changes in the container folder are to be
submitted to the management module, verified and and saved to flash.
6-Indicates that the changes in the container folder are to be
discarded."
::= { cm100ConfigEntry 3 }
cm100ConfigModuleName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..63))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies a user configurable name for the media converter module
present in the chassis. "
::= { cm100ConfigEntry 4 }
cm100ConfigLinkMode OBJECT-TYPE
SYNTAX INTEGER {
standard(0),
linkPassthrough(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the Link Mode for the media converter module. This object
is read-only if the media converter module's ConfigMode jumper is set to
hardwareSwitches(0)."
::= { cm100ConfigEntry 5 }
cm100ConfigFiberFarEndFault OBJECT-TYPE
SYNTAX EnableDisableValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the fiber Far End Fault setting for the media
module. This setting is always enabled if Link Mode is set to linkPassthrough.
This object is read-only if the media converter module's ConfigMode
jumper is set to hardwareSwitches(0). "
::= { cm100ConfigEntry 6 }
cm100ConfigFiberPortName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..8))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies a user definable name for the fiber port."
::= { cm100ConfigEntry 7 }
cm100ConfigFiberPortEnable OBJECT-TYPE
SYNTAX YesNoValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies whether the fiber port is enabled. "
::= { cm100ConfigEntry 8 }
cm100ConfigCopperPortName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..8))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies a user definable name for the copper port. "
::= { cm100ConfigEntry 9 }
cm100ConfigCopperPortEnable OBJECT-TYPE
SYNTAX YesNoValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies whether the fiber port is enabled. "
::= { cm100ConfigEntry 10 }
cm100ConfigCopperAutoNegotiation OBJECT-TYPE
SYNTAX EnableDisableValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the whether copper auto-negotiation is
enabled. This object is read-only if the media converter module's ConfigMode
jumper is set to hardwareSwitches(0)."
::= { cm100ConfigEntry 11 }
cm100ConfigCopperCrossOver OBJECT-TYPE
SYNTAX INTEGER {
auto(0),
mdi(1),
mdix(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the copper MDI/MDI-X setting.This object
is read-only if the media converter module's ConfigMode jumper is set to"
::= { cm100ConfigEntry 12 }
cm100ConfigCopperPause OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
symmetrical(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the copper's port pause (flow control) settings.
This object is read-only if the media converter module's ConfigMode jumper is
set to hardwareSwitches(0)."
::= { cm100ConfigEntry 13 }
--
-- end of cm100ConfigTable
--
--
-- cm100LedTable
--
cm100LedTable OBJECT-TYPE
SYNTAX SEQUENCE OF Cm100LedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of CM-100 type media converter module's LED status information."
::= { cm100Fixed 3 }
cm100LedEntry OBJECT-TYPE
SYNTAX Cm100LedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of the table, each relating to a separate CM-100 type
media converter module."
INDEX { mcrChassisIndex, cm100LedSlotIndex }
::= { cm100LedTable 1 }
Cm100LedEntry ::=
SEQUENCE {
cm100LedSlotIndex SlotNumber,
cm100LedPWR INTEGER,
cm100LedLKF INTEGER,
cm100LedLKC INTEGER
}
cm100LedSlotIndex OBJECT-TYPE
SYNTAX SlotNumber
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Slot number the CM-100 type module is currently inserted"
::= { cm100LedEntry 2 }
cm100LedPWR OBJECT-TYPE
SYNTAX INTEGER {
off(0),
onGreen(1),
blinking(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the status of the power (PWR) LED on the media converter module.
Possible status values are:
off(0) - No power to the module
onGreen(1) - Power being applied to module
blinking(2) - Fiber loopback enabled"
::= { cm100LedEntry 3 }
cm100LedLKF OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the status of the link fiber (LKF) LED on the media converter module.
Possible status values are:
off(0) - No fiber link
on(1) - Fiber link present"
::= { cm100LedEntry 4 }
cm100LedLKC OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the status of the link copper (LKC) LED on the
media converter module.
Possible status values are:
off(0) - No copper link
on(1) - Copper link present"
::= { cm100LedEntry 5 }
--
-- end of cm100LedTable
--
--
-- end of cm100Fixed
--
-- cm100mmFixed - 100 Mb fixed media Converter type modules
--
cm100mmFixed OBJECT IDENTIFIER ::= { mcrModuleTypes 7 }
--
-- cm100mmFixedTable
--
cm100mmFixedTable OBJECT-TYPE
SYNTAX SEQUENCE OF Cm100mmFixedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of CM-100MM type media converter module's configuration and status type
information."
::= { cm100mmFixed 1 }
cm100mmFixedEntry OBJECT-TYPE
SYNTAX Cm100mmFixedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of the table, each relating to a separate CM-100MM type
media converter module."
INDEX { mcrChassisIndex, cm100mmSlotIndex }
::= { cm100mmFixedTable 1 }
Cm100mmFixedEntry ::=
SEQUENCE {
cm100mmSlotIndex SlotNumber,
cm100mmModelName DisplayString,
cm100mmModelDesc DisplayString,
cm100mmHwJmp5ConfigMode INTEGER,
cm100mmHwSw1LinkPassthrough INTEGER,
cm100mmHwSw2FarEndFault INTEGER,
cm100mmHwSw3Loopback1 INTEGER,
cm100mmHwSw4Loopback2 INTEGER,
cm100mmFiber1LinkStatus INTEGER,
cm100mmFiber1ConnType INTEGER,
cm100mmFiber1Speed INTEGER,
cm100mmFiber1FarEndFault INTEGER,
cm100mmFiber1ReceiveStatus INTEGER,
cm100mmFiber2LinkStatus INTEGER,
cm100mmFiber2ConnType INTEGER,
cm100mmFiber2Speed INTEGER,
cm100mmFiber2FarEndFault INTEGER,
cm100mmFiber2ReceiveStatus INTEGER,
cm100mmFiberLoopBack INTEGER
}
cm100mmSlotIndex OBJECT-TYPE
SYNTAX SlotNumber
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Slot number the CM-100MM type module is currently inserted"
::= { cm100mmFixedEntry 2 }
cm100mmModelName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the model of media converter module present in the
chassis"
::= { cm100mmFixedEntry 3 }
cm100mmModelDesc OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies a static description of the media converter module present
in the chassis"
::= { cm100mmFixedEntry 4 }
cm100mmHwJmp5ConfigMode OBJECT-TYPE
SYNTAX INTEGER {
hardwareSwitches(0),
auto(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the media converter module's ConfigMode, set by hardware
switch on the media converter module. When this object is set to hardwareSwitches(0), the
media converter module will disable configuration control from the management
module's software and all configuration control comes from the media
module's hardware switches or jumpers. "
::= { cm100mmFixedEntry 5 }
cm100mmHwSw1LinkPassthrough OBJECT-TYPE
SYNTAX INTEGER {
swDownDisabled(0),
swUpEnabled(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current switch setting for Link Passthrough."
::= { cm100mmFixedEntry 6 }
cm100mmHwSw2FarEndFault OBJECT-TYPE
SYNTAX INTEGER {
swDownDisabled(0),
swUpEnabled(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current switch setting for Far-End Fault."
::= { cm100mmFixedEntry 7 }
cm100mmHwSw3Loopback1 OBJECT-TYPE
SYNTAX INTEGER {
swDownEnabled(0),
swUpDisabled(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current switch setting for Loopback (fiber port 1)."
::= { cm100mmFixedEntry 8 }
cm100mmHwSw4Loopback2 OBJECT-TYPE
SYNTAX INTEGER {
swDownEnabled(0),
swUpDisabled(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current switch setting for Loopback (fiber port 2)."
::= { cm100mmFixedEntry 9 }
cm100mmFiber1LinkStatus OBJECT-TYPE
SYNTAX INTEGER {
down(0),
up(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current fiber link status (port 1)."
::= { cm100mmFixedEntry 12 }
cm100mmFiber1ConnType OBJECT-TYPE
SYNTAX INTEGER {
sc(0),
lc(1),
st(2),
sfp(3),
fc(5),
mtrj(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's fiber port connector type (port 1)."
::= { cm100mmFixedEntry 13 }
cm100mmFiber1Speed OBJECT-TYPE
SYNTAX INTEGER {
speed100Mbps(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's fiber port speed in megabits per second (port 1)."
::= { cm100mmFixedEntry 14 }
cm100mmFiber1FarEndFault OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
ok(1),
receivingFEF(2),
sendingFEF(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current fiber Far End Fault status (port 1)."
::= { cm100mmFixedEntry 15 }
cm100mmFiber1ReceiveStatus OBJECT-TYPE
SYNTAX INTEGER {
fault(0),
ok(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the status of whether light is being received
on the fiber port (port 1)"
::= { cm100mmFixedEntry 16 }
cm100mmFiber2LinkStatus OBJECT-TYPE
SYNTAX INTEGER {
down(0),
up(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current fiber link status (port 2)."
::= { cm100mmFixedEntry 17 }
cm100mmFiber2ConnType OBJECT-TYPE
SYNTAX INTEGER {
sc(0),
lc(1),
st(2),
sfp(3),
fc(5),
mtrj(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's fiber port connector type (port 2)."
::= { cm100mmFixedEntry 18 }
cm100mmFiber2Speed OBJECT-TYPE
SYNTAX INTEGER {
speed100Mbps(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's fiber port speed in megabits per second (port 2)."
::= { cm100mmFixedEntry 19 }
cm100mmFiber2FarEndFault OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
ok(1),
receivingFEF(2),
sendingFEF(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current fiber Far End Fault status (port 2)."
::= { cm100mmFixedEntry 20 }
cm100mmFiber2ReceiveStatus OBJECT-TYPE
SYNTAX INTEGER {
fault(0),
ok(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the status of whether light is being received
on the fiber port (port 2)"
::= { cm100mmFixedEntry 21 }
cm100mmFiberLoopBack OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
port1(1),
port2(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
This object is read-only if the media converter module's ConfigMode jumper is
set to hardwareSwitches(0)."
::= { cm100mmFixedEntry 22 }
--
-- end of cm100mmFixedTable
--
--
-- cm100mmConfigTable
--
cm100mmConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF Cm100mmConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of CM-100MM type media converter module's configuration and status type
information."
::= { cm100mmFixed 2 }
cm100mmConfigEntry OBJECT-TYPE
SYNTAX Cm100mmConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of the table, each relating to a separate CM-100MM type
media converter module."
INDEX { mcrChassisIndex, cm100mmConfigSlotIndex }
::= { cm100mmConfigTable 1 }
Cm100mmConfigEntry ::=
SEQUENCE {
cm100mmConfigSlotIndex SlotNumber,
cm100mmConfigStatus ContainerStatus,
cm100mmConfigModuleName DisplayString,
cm100mmConfigLinkMode INTEGER,
cm100mmConfigFiberFarEndFault EnableDisableValue,
cm100mmConfigFiber1PortName DisplayString,
cm100mmConfigFiber1PortEnable YesNoValue,
cm100mmConfigFiber2PortName DisplayString,
cm100mmConfigFiber2PortEnable YesNoValue
}
cm100mmConfigSlotIndex OBJECT-TYPE
SYNTAX SlotNumber
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Slot number the CM-100MM type module is currently inserted"
::= { cm100mmConfigEntry 2 }
cm100mmConfigStatus OBJECT-TYPE
SYNTAX ContainerStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When you perform a GET on this variable, one of
the following values will be returned:
1-Indicates that the container folder is active with no changes.
2-Indicates that the container folder is active with change(s).
Once you have completed setting the variables in a folder, you
will want to submit your changes to the management module. To do
this, set the Status variable to 4. If you want to discard the
changes, set the Status variable to 6.
4-Indicates that the changes in the container folder are to be
submitted to the management module, verified and and saved to flash.
6-Indicates that the changes in the container folder are to be
discarded."
::= { cm100mmConfigEntry 3 }
cm100mmConfigModuleName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..63))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies a user configurable name for the media converter module
present in the chassis. "
::= { cm100mmConfigEntry 4 }
cm100mmConfigLinkMode OBJECT-TYPE
SYNTAX INTEGER {
standard(0),
linkPassthrough(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the Link Mode for the media converter module. This object
is read-only if the media converter module's ConfigMode jumper is set to
hardwareSwitches(0)."
::= { cm100mmConfigEntry 5 }
cm100mmConfigFiberFarEndFault OBJECT-TYPE
SYNTAX EnableDisableValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the fiber Far End Fault setting for the media
module. This setting is always enabled if Link Mode is set to linkPassthrough.
This object is read-only if the media converter module's ConfigMode
jumper is set to hardwareSwitches(0). "
::= { cm100mmConfigEntry 6 }
cm100mmConfigFiber1PortName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..8))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies a user definable name for the fiber port (port 1)."
::= { cm100mmConfigEntry 7 }
cm100mmConfigFiber1PortEnable OBJECT-TYPE
SYNTAX YesNoValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies whether the fiber port is enabled (port 2). "
::= { cm100mmConfigEntry 8 }
cm100mmConfigFiber2PortName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..8))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies a user definable name for the fiber port (port 2)."
::= { cm100mmConfigEntry 9 }
cm100mmConfigFiber2PortEnable OBJECT-TYPE
SYNTAX YesNoValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies whether the fiber port is enabled (port 2). "
::= { cm100mmConfigEntry 10 }
--
-- end of cm100mmConfigTable
--
--
-- cm100mmLedTable
--
cm100mmLedTable OBJECT-TYPE
SYNTAX SEQUENCE OF Cm100mmLedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of CM-100MM type media converter module's LED status information."
::= { cm100mmFixed 3 }
cm100mmLedEntry OBJECT-TYPE
SYNTAX Cm100mmLedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of the table, each relating to a separate CM-100MM type
media converter module."
INDEX { mcrChassisIndex, cm100mmLedSlotIndex }
::= { cm100mmLedTable 1 }
Cm100mmLedEntry ::=
SEQUENCE {
cm100mmLedSlotIndex SlotNumber,
cm100mmLedPWR INTEGER,
cm100mmLedLK1 INTEGER,
cm100mmLedLK2 INTEGER
}
cm100mmLedSlotIndex OBJECT-TYPE
SYNTAX SlotNumber
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Slot number the CM-100MM type module is currently inserted"
::= { cm100mmLedEntry 2 }
cm100mmLedPWR OBJECT-TYPE
SYNTAX INTEGER {
off(0),
onGreen(1),
blinking(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the status of the power (PWR) LED on the media converter module.
Possible status values are:
off(0) - No power to the module
onGreen(1) - Power being applied to module
blinking(2) - Fiber loopback enabled"
::= { cm100mmLedEntry 3 }
cm100mmLedLK1 OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the status of the link fiber port 1 (LK1) LED on the media converter module.
Possible status values are:
off(0) - No fiber link
on(1) - Fiber link present"
::= { cm100mmLedEntry 4 }
cm100mmLedLK2 OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the status of the link fiber port 2 (LK2) LED on the
media converter module.
Possible status values are:
off(0) - No fiber link
on(1) - Fiber link present"
::= { cm100mmLedEntry 5 }
--
-- end of cm100mmLedTable
--
--
-- end of cm100mmFixed
--
--
-- cm1110RateConv - 10/100/100 Mb Rate Converting media Converter type modules
--
cm1110RateConv OBJECT IDENTIFIER ::= { mcrModuleTypes 3 }
--
-- cm1110RateConvTable
--
cm1110RateConvTable OBJECT-TYPE
SYNTAX SEQUENCE OF Cm1110RateConvEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of CM-1110 type media converter module's configuration and status type
information."
::= { cm1110RateConv 1 }
cm1110RateConvEntry OBJECT-TYPE
SYNTAX Cm1110RateConvEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of the table, each relating to a separate CM-1110 type
media converter module."
INDEX { mcrChassisIndex, cm1110SlotIndex}
::= { cm1110RateConvTable 1 }
Cm1110RateConvEntry ::=
SEQUENCE {
cm1110SlotIndex SlotNumber,
cm1110ModelName DisplayString,
cm1110ModelDesc DisplayString,
cm1110HwJmp5ConfigMode INTEGER,
cm1110HwJmp6AutoMDIX INTEGER,
cm1110HwSw1TpAutoNegotiation INTEGER,
cm1110HwSw2LinkMode INTEGER,
cm1110HwSw3FiberFaultAlert INTEGER,
cm1110HwSw4TpDuplex INTEGER,
cm1110HwSw5TpSpeed INTEGER,
cm1110HwSw6FiberAutoNegotiation INTEGER,
cm1110HwSw6FiberSfp100Duplex INTEGER,
cm1110HwSw7Loopback INTEGER,
cm1110FiberLinkStatus INTEGER,
cm1110FiberConnType INTEGER,
cm1110FiberAutoNegState INTEGER,
cm1110FiberSpeed INTEGER,
cm1110FiberDuplex INTEGER,
cm1110FiberPauseEnh INTEGER,
cm1110FiberLPRFStatus INTEGER,
cm1110FiberSfp100FarEndFault INTEGER,
cm1110FiberReceiveStatus INTEGER,
cm1110FiberLoopBack EnableDisableValue,
cm1110CopperLinkStatus INTEGER,
cm1110CopperConnType INTEGER,
cm1110CopperAutoNegState INTEGER,
cm1110CopperSpeed INTEGER,
cm1110CopperDuplex INTEGER,
cm1110CopperCrossOver INTEGER,
cm1110CopperPauseEnh INTEGER,
cm1110CopperLPRFStatus INTEGER,
cm1110CopperAutoSpeedDownshift INTEGER
}
cm1110SlotIndex OBJECT-TYPE
SYNTAX SlotNumber
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Slot number the CM-1110 type module is currently inserted"
::= { cm1110RateConvEntry 2 }
cm1110ModelName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the model of media converter module present in the
chassis"
::= { cm1110RateConvEntry 3 }
cm1110ModelDesc OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies a static description of the media converter module present
in the chassis"
::= { cm1110RateConvEntry 4 }
cm1110HwJmp5ConfigMode OBJECT-TYPE
SYNTAX INTEGER {
hardwareSwitches(0),
auto(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the media converter module's ConfigMode, set by hardware
switch on the media converter module. When this object is set to hardwareSwitches(0), the
media converter module will disable configuration control from the management
module's software and all configuration control comes from the media
module's hardware switches or jumpers. "
::= { cm1110RateConvEntry 5 }
cm1110HwJmp6AutoMDIX OBJECT-TYPE
SYNTAX INTEGER {
mdix(0),
auto(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the media converter module's hardware Auto MDIX jumper
settings. "
::= { cm1110RateConvEntry 6 }
cm1110HwSw1TpAutoNegotiation OBJECT-TYPE
SYNTAX INTEGER {
swDownDisabled(0),
swUpEnabled(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current switch setting for copper Auto-Negotiation."
::= { cm1110RateConvEntry 7 }
cm1110HwSw2LinkMode OBJECT-TYPE
SYNTAX INTEGER {
swDownNormalMode(0),
swUpSmartLinkPassthroughMode(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current switch setting for Link Mode."
::= { cm1110RateConvEntry 8 }
cm1110HwSw3FiberFaultAlert OBJECT-TYPE
SYNTAX INTEGER {
swDownDisabled(0),
swUpEnabled(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current switch setting for Fiber Fault Alert."
::= { cm1110RateConvEntry 9 }
cm1110HwSw4TpDuplex OBJECT-TYPE
SYNTAX INTEGER {
swDownHalf(0),
swUpFull(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current switch setting for copper duplex."
::= { cm1110RateConvEntry 10 }
cm1110HwSw5TpSpeed OBJECT-TYPE
SYNTAX INTEGER {
swDown10Mbps(0),
swUp100Mbps(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current switch setting for Link Mode."
::= { cm1110RateConvEntry 11 }
cm1110HwSw6FiberAutoNegotiation OBJECT-TYPE
SYNTAX INTEGER {
swDownDisabled(0),
swUpEnabled(1),
notApplicable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current switch setting for fiber Auto-Ngotiation.
This object is not applicable if there is a 100 Mbps SFP modules
inserted."
::= { cm1110RateConvEntry 12 }
cm1110HwSw6FiberSfp100Duplex OBJECT-TYPE
SYNTAX INTEGER {
swDownHalfDuplex(0),
swUpFullDuplex(1),
notApplicable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current switch setting for fiber duplex if a 100 Mbps
SFP module is inserted. Otherwise this object is not applicable."
::= { cm1110RateConvEntry 13 }
cm1110HwSw7Loopback OBJECT-TYPE
SYNTAX INTEGER {
swDownEnabled(0),
swUpDisabled(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current switch setting for fiber loopback mode."
::= { cm1110RateConvEntry 14 }
cm1110FiberLinkStatus OBJECT-TYPE
SYNTAX INTEGER {
down(0),
up(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current fiber link status."
::= { cm1110RateConvEntry 15 }
cm1110FiberConnType OBJECT-TYPE
SYNTAX INTEGER {
sc(0),
lc(1),
st(2),
sfp(3),
fc(5),
mtrj(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's fiber port connector type."
::= { cm1110RateConvEntry 16 }
cm1110FiberAutoNegState OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
complete(1),
inProgress(2),
notApplicable(99)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current fiber auto-negotiation state. This object is
not applicable if the fiber connector type is a 100 Mbps SFP module."
::= { cm1110RateConvEntry 17 }
cm1110FiberSpeed OBJECT-TYPE
SYNTAX INTEGER {
speed100Mbps(1),
speed1000Mbps(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If fiber auto-negotiation state is complete then this object indicates
the media converter module's current fiber auto-negotiated duplex setting. If
auto-negotiation is not complete then the value returned should be
ignored."
::= { cm1110RateConvEntry 18 }
cm1110FiberDuplex OBJECT-TYPE
SYNTAX INTEGER {
half(0),
full(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the current fiber port duplex state. "
::= { cm1110RateConvEntry 19 }
cm1110FiberPauseEnh OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
symmetrical(1),
asymmetricalTx(2),
asymmetricalRx(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If fiber auto-negotiation state is complete then this object indicates
the media converter module's current fiber auto-negotiated pause setting. If
auto-negotiation is not complete then the value returned should be
ignored."
::= { cm1110RateConvEntry 20 }
cm1110FiberLPRFStatus OBJECT-TYPE
SYNTAX INTEGER {
ok(0),
offline(1),
linkFault(2),
autoNegError(3),
notApplicable(99)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's fiber Link Partner Remote Fault status. This object
is not applicable if there is a 100 Mbps SFP module inserted."
::= { cm1110RateConvEntry 21 }
cm1110FiberSfp100FarEndFault OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
ok(1),
receivingFEF(2),
sendingFEF(3),
notApplicable(99)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current fiber Far End Fault status if a 100 Mbps SFP
module is inserted. Otherwise this object is not applicable."
::= { cm1110RateConvEntry 22 }
cm1110FiberReceiveStatus OBJECT-TYPE
SYNTAX INTEGER {
fault(0),
ok(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the status of whether light is being received
on the fiber port"
::= { cm1110RateConvEntry 23 }
cm1110FiberLoopBack OBJECT-TYPE
SYNTAX EnableDisableValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
This object is read-only if the media converter module's ConfigMode jumper is
set to hardwareSwitches(0)."
::= { cm1110RateConvEntry 24 }
cm1110CopperLinkStatus OBJECT-TYPE
SYNTAX INTEGER {
down(0),
up(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current copper link status."
::= { cm1110RateConvEntry 25 }
cm1110CopperConnType OBJECT-TYPE
SYNTAX INTEGER {
rj45(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's copper connector type."
::= { cm1110RateConvEntry 26 }
cm1110CopperAutoNegState OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
complete(1),
inProgress(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current copper auto-negotiation state."
::= { cm1110RateConvEntry 27 }
cm1110CopperSpeed OBJECT-TYPE
SYNTAX INTEGER {
speed10Mbs(0),
speed100Mbps(1),
speed1000Mbps(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If copper auto-negotiation state is complete then this object
indicates the media converter module's current copper auto-negotiated speed
setting. If auto-negotiation is not complete then the value returned
should be ignored."
::= { cm1110RateConvEntry 28 }
cm1110CopperDuplex OBJECT-TYPE
SYNTAX INTEGER {
half(0),
full(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If copper auto-negotiation state is complete then this object
indicates the media converter module's current copper auto-negotiated duplex
setting. If auto-negotiation is not complete then the value returned
should be ignored."
::= { cm1110RateConvEntry 29 }
cm1110CopperCrossOver OBJECT-TYPE
SYNTAX INTEGER {
mdi(0),
mdix(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If copper auto-negotiation state is complete then this object
indicates the media converter module's current copper auto-negotiated MDI/MDI-X
setting. If auto-negotiation is not complete then the value returned
should be ignored."
::= { cm1110RateConvEntry 30 }
cm1110CopperPauseEnh OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
symmetrical(1),
asymmetricalTx(2),
asymmetricalRx(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If copper auto-negotiation state is complete then this object indicates
the media converter module's current copper auto-negotiated pause setting. If
auto-negotiation is not complete then the value returned should be ignored."
::= { cm1110RateConvEntry 31 }
cm1110CopperLPRFStatus OBJECT-TYPE
SYNTAX INTEGER {
ok(0),
remoteFault(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's copper Link Partner Remote Fault status."
::= { cm1110RateConvEntry 32 }
cm1110CopperAutoSpeedDownshift OBJECT-TYPE
SYNTAX INTEGER {
noDownshift(0),
downshift(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the status of the copper auto speed downshift
feature. noDownshift indicates that an automatic downshift of the
copper speed has not occurred."
::= { cm1110RateConvEntry 33 }
--
-- cm1110RateConvTable
--
--
-- cm1110ConfigTable
--
cm1110ConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF Cm1110ConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of CM-1110 type media converter module's configuration type
information."
::= { cm1110RateConv 2 }
cm1110ConfigEntry OBJECT-TYPE
SYNTAX Cm1110ConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of the table, each relating to a separate CM-1110 type
media converter module."
INDEX { mcrChassisIndex, cm1110ConfigSlotIndex}
::= { cm1110ConfigTable 1 }
Cm1110ConfigEntry ::=
SEQUENCE {
cm1110ConfigSlotIndex SlotNumber,
cm1110ConfigStatus ContainerStatus,
cm1110ConfigModuleName DisplayString,
cm1110ConfigLinkMode INTEGER,
cm1110ConfigFiberFaultAlert EnableDisableValue,
cm1110ConfigMaxPacketsSize INTEGER,
cm1110ConfigFiberPortName DisplayString,
cm1110ConfigFiberPortEnable YesNoValue,
cm1110ConfigFiberAutoNegotiation EnableDisableValue,
cm1110ConfigFiberSfp100duplex INTEGER,
cm1110ConfigCopperPortName DisplayString,
cm1110ConfigCopperPortEnable YesNoValue,
cm1110ConfigCopperAutoNegotiation EnableDisableValue,
cm1110ConfigCopperAutoNegAdv10HDX YesNoValue,
cm1110ConfigCopperAutoNegAdv10FDX YesNoValue,
cm1110ConfigCopperAutoNegAdv100HDX YesNoValue,
cm1110ConfigCopperAutoNegAdv100FDX YesNoValue,
cm1110ConfigCopperAutoNegAdv1000FDX YesNoValue,
cm1110ConfigCopperSpeed INTEGER,
cm1110ConfigCopperDuplex INTEGER,
cm1110ConfigCopperCrossOver INTEGER,
cm1110ConfigCopperPauseEnh INTEGER,
cm1110ConfigCopperAutoSpeedDownshift INTEGER,
cm1110ConfigCopper10BaseTDistance INTEGER,
cm1110ConfigUnidirectionalEthernet INTEGER,
cm1110ConfigPriorityToEgressQueueMap0 INTEGER,
cm1110ConfigPriorityToEgressQueueMap1 INTEGER,
cm1110ConfigPriorityToEgressQueueMap2 INTEGER,
cm1110ConfigPriorityToEgressQueueMap3 INTEGER,
cm1110ConfigPriorityToEgressQueueMap4 INTEGER,
cm1110ConfigPriorityToEgressQueueMap5 INTEGER,
cm1110ConfigPriorityToEgressQueueMap6 INTEGER,
cm1110ConfigPriorityToEgressQueueMap7 INTEGER,
cm1110ConfigCopper8021pPriority OnOffValue,
cm1110ConfigCopperIpTosPriority OnOffValue,
cm1110ConfigCopperPriorityPrecedence INTEGER,
cm1110ConfigCopperCongestionPolicy INTEGER,
cm1110ConfigCopperPriorityMap0 INTEGER,
cm1110ConfigCopperPriorityMap1 INTEGER,
cm1110ConfigCopperPriorityMap2 INTEGER,
cm1110ConfigCopperPriorityMap3 INTEGER,
cm1110ConfigCopperPriorityMap4 INTEGER,
cm1110ConfigCopperPriorityMap5 INTEGER,
cm1110ConfigCopperPriorityMap6 INTEGER,
cm1110ConfigCopperPriorityMap7 INTEGER,
cm1110ConfigCopperIngressLimit INTEGER,
cm1110ConfigCopperEgressLimit INTEGER,
cm1110ConfigCopperDiscardTaggedFrames OnOffValue,
cm1110ConfigCopperDiscardUntaggedFrames OnOffValue,
cm1110ConfigCopperDefaultVlanId INTEGER,
cm1110ConfigCopperDefaultPriority INTEGER,
cm1110ConfigCopperVlanTaggingAction INTEGER,
cm1110ConfigCopperFilterUnknownMulticast OnOffValue,
cm1110ConfigCopperFilterUnknownUnicast OnOffValue,
cm1110ConfigFiber8021pPriority OnOffValue,
cm1110ConfigFiberIpTosPriority OnOffValue,
cm1110ConfigFiberPriorityPrecedence INTEGER,
cm1110ConfigFiberCongestionPolicy INTEGER,
cm1110ConfigFiberPriorityMap0 INTEGER,
cm1110ConfigFiberPriorityMap1 INTEGER,
cm1110ConfigFiberPriorityMap2 INTEGER,
cm1110ConfigFiberPriorityMap3 INTEGER,
cm1110ConfigFiberPriorityMap4 INTEGER,
cm1110ConfigFiberPriorityMap5 INTEGER,
cm1110ConfigFiberPriorityMap6 INTEGER,
cm1110ConfigFiberPriorityMap7 INTEGER,
cm1110ConfigFiberIngressLimit INTEGER,
cm1110ConfigFiberEgressLimit INTEGER,
cm1110ConfigFiberDiscardTaggedFrames OnOffValue,
cm1110ConfigFiberDiscardUntaggedFrames OnOffValue,
cm1110ConfigFiberDefaultVlanId INTEGER,
cm1110ConfigFiberDefaultPriority INTEGER,
cm1110ConfigFiberVlanTaggingAction INTEGER,
cm1110ConfigFiberFilterUnknownMulticast OnOffValue,
cm1110ConfigFiberFilterUnknownUnicast OnOffValue,
cm1110ConfigFiberSgmiiInterface EnableDisableValue
}
cm1110ConfigSlotIndex OBJECT-TYPE
SYNTAX SlotNumber
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Slot number the CM-1110 type module is currently inserted"
::= { cm1110ConfigEntry 2 }
cm1110ConfigStatus OBJECT-TYPE
SYNTAX ContainerStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When you perform a GET on this variable, one of
the following values will be returned:
1-Indicates that the container folder is active with no changes.
2-Indicates that the container folder is active with change(s).
Once you have completed setting the variables in a folder, you
will want to submit your changes to the management module. To do
this, set the Status variable to 4. If you want to discard the
changes, set the Status variable to 6.
4-Indicates that the changes in the container folder are to be
submitted to the management module, verified and and saved to flash.
6-Indicates that the changes in the container folder are to be
discarded."
::= { cm1110ConfigEntry 3 }
cm1110ConfigModuleName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..63))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies a user configurable name for the media converter module
present in the chassis. "
::= { cm1110ConfigEntry 4 }
cm1110ConfigLinkMode OBJECT-TYPE
SYNTAX INTEGER {
standard(0),
smartLinkPassthrough(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the Link Mode for the media converter module. This object
is read-only if the media converter module's ConfigMode jumper is set to
hardwareSwitches(0)."
::= { cm1110ConfigEntry 5 }
cm1110ConfigFiberFaultAlert OBJECT-TYPE
SYNTAX EnableDisableValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the Fiber Fault Alert setting for the media
module. For 100 Mbps SFP modules, this setting is always effectively
enabled if Link Mode is set to smartLinkPassthrough.
This object is read-only if the media converter module's ConfigMode
jumper is set to hardwareSwitches(0). "
::= { cm1110ConfigEntry 6 }
cm1110ConfigMaxPacketsSize OBJECT-TYPE
SYNTAX INTEGER {
maxPacket1522(0),
maxPacket2048(1),
maxPacket10240(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the media converter module's maximum packet size setting
This object is read-only if the media converter module's ConfigMode jumper is
set to hardwareSwitches(0)."
::= { cm1110ConfigEntry 7 }
cm1110ConfigFiberPortName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..8))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies a user definable name for the fiber port."
::= { cm1110ConfigEntry 8 }
cm1110ConfigFiberPortEnable OBJECT-TYPE
SYNTAX YesNoValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies whether the fiber port is enabled. "
::= { cm1110ConfigEntry 9 }
cm1110ConfigFiberAutoNegotiation OBJECT-TYPE
SYNTAX EnableDisableValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies whether fiber auto-negotiation is enabled.
This object does not apply if the fiber connector type is a 100 Mbps
SFP module. This object is read-only if the media converter module's ConfigMode
jumper is set to hardwareSwitches(0)."
::= { cm1110ConfigEntry 10 }
cm1110ConfigFiberSfp100duplex OBJECT-TYPE
SYNTAX INTEGER {
full(0),
half(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If the fiber connector type is SFP and it is a 100 Mbps fiber module then
this object identifies the duplex setting for the 100 Mbps fiber port.
Duplex for 1000 Mbps has to be auto negotiated. This object is read-only if the
media converter module's ConfigMode jumper is set to hardwareSwitches(0)."
::= { cm1110ConfigEntry 11 }
cm1110ConfigCopperPortName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..8))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies a user definable name for the copper port. "
::= { cm1110ConfigEntry 12 }
cm1110ConfigCopperPortEnable OBJECT-TYPE
SYNTAX YesNoValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies whether the fiber port is enabled. "
::= { cm1110ConfigEntry 13 }
cm1110ConfigCopperAutoNegotiation OBJECT-TYPE
SYNTAX EnableDisableValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the whether copper auto-negotiation is
enabled. This object is read-only if the media converter module's ConfigMode
jumper is set to hardwareSwitches(0)."
::= { cm1110ConfigEntry 14 }
cm1110ConfigCopperAutoNegAdv10HDX OBJECT-TYPE
SYNTAX YesNoValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object controls whether or the copper port advertises willingness
to connect at 10Mbps, half duplex. This setting is ignored when
auto-negotiation is disabled."
::= { cm1110ConfigEntry 15 }
cm1110ConfigCopperAutoNegAdv10FDX OBJECT-TYPE
SYNTAX YesNoValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object controls whether or the copper port advertises willingness
to connect at 10Mbps, full duplex. This setting is ignored when
auto-negotiation is disabled."
::= { cm1110ConfigEntry 16 }
cm1110ConfigCopperAutoNegAdv100HDX OBJECT-TYPE
SYNTAX YesNoValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object controls whether or the copper port advertises willingness
to connect at 100Mbps, half duplex. This setting is ignored when
auto-negotiation is disabled."
::= { cm1110ConfigEntry 17 }
cm1110ConfigCopperAutoNegAdv100FDX OBJECT-TYPE
SYNTAX YesNoValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object controls whether or the copper port advertises willingness
to connect at 100Mbps, full duplex. This setting is ignored when
auto-negotiation is disabled."
::= { cm1110ConfigEntry 18 }
cm1110ConfigCopperAutoNegAdv1000FDX OBJECT-TYPE
SYNTAX YesNoValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object controls whether or the copper port advertises willingness
to connect at 1000Mbps, full duplex. This setting is ignored when
auto-negotiation is disabled."
::= { cm1110ConfigEntry 19 }
cm1110ConfigCopperSpeed OBJECT-TYPE
SYNTAX INTEGER {
speed10Mbs(0),
speed100Mbps(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If copper auto-negotiation is disabled then this object identifies
the configured cooper speed. 1000 Mbps speed can only be auto
negotiated. If copper auto-negotiation is enabled then this object
is ignored. This object is read-only if the media converter module's ConfigMode
jumper is set to hardwareSwitches(0)."
::= { cm1110ConfigEntry 20 }
cm1110ConfigCopperDuplex OBJECT-TYPE
SYNTAX INTEGER {
full(0),
half(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If copper auto-negotiation is disabled then this object identifies
the duplex setting for 10 & 100 Mbps for the copper port. Duplex for
1000 Mbps has to be auto negotiated. This object is read-only if the
media converter module's ConfigMode jumper is set to hardwareSwitches(0)."
::= { cm1110ConfigEntry 21 }
cm1110ConfigCopperCrossOver OBJECT-TYPE
SYNTAX INTEGER {
auto(0),
mdi(1),
mdix(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the copper MDI/MDI-X setting.This object
is read-only if the media converter module's ConfigMode jumper is set to"
::= { cm1110ConfigEntry 22 }
cm1110ConfigCopperPauseEnh OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
symmetrical(1),
asymmetricalTx(2),
symmAsymRx(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the copper pause (flow control) setting that
is a advertised. The settings can be disabled, advertise symmetrical,
advertise asymmetrical TX or advertise symmetrical and asymmetrical
RX. This object is read-only if the media converter module's ConfigMode jumper
is set to hardwareSwitches(0)."
::= { cm1110ConfigEntry 23 }
cm1110ConfigCopperAutoSpeedDownshift OBJECT-TYPE
SYNTAX INTEGER(0..8)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the number of times the PHY attempts to
establish a Gigabit link before the PHY downshift to the next
highest speed. A value of 0 indicates the auto downshift is
disabled"
::= { cm1110ConfigEntry 24 }
cm1110ConfigCopper10BaseTDistance OBJECT-TYPE
SYNTAX INTEGER {
normal(0),
extended(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When using cable exceeding 100 meters in 10BASE-T mode this feature
should be set to extended(1)."
::= { cm1110ConfigEntry 25 }
cm1110ConfigUnidirectionalEthernet OBJECT-TYPE
SYNTAX INTEGER {
notApplicable(-1),
disabled(0),
copperToFiber(1),
fiberToCopper(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Restrict the flow of Ethernet traffic to a single direction.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This feature may require a media converter module firmware upgrade)."
::= { cm1110ConfigEntry 26 }
cm1110ConfigPriorityToEgressQueueMap0 OBJECT-TYPE
SYNTAX INTEGER(0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the egress queue of frames tagged with 802.1p priority 0.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This feature may require a media converter module firmware upgrade)."
::= { cm1110ConfigEntry 27 }
cm1110ConfigPriorityToEgressQueueMap1 OBJECT-TYPE
SYNTAX INTEGER(0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the egress queue of frames tagged with 802.1p priority 1.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This feature may require a media converter module firmware upgrade)."
::= { cm1110ConfigEntry 28 }
cm1110ConfigPriorityToEgressQueueMap2 OBJECT-TYPE
SYNTAX INTEGER(0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the egress queue of frames tagged with 802.1p priority 2.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This feature may require a media converter module firmware upgrade)."
::= { cm1110ConfigEntry 29 }
cm1110ConfigPriorityToEgressQueueMap3 OBJECT-TYPE
SYNTAX INTEGER(0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the egress queue of frames tagged with 802.1p priority 3.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This feature may require a media converter module firmware upgrade)."
::= { cm1110ConfigEntry 30 }
cm1110ConfigPriorityToEgressQueueMap4 OBJECT-TYPE
SYNTAX INTEGER(0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the egress queue of frames tagged with 802.1p priority 4.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This feature may require a media converter module firmware upgrade)."
::= { cm1110ConfigEntry 31 }
cm1110ConfigPriorityToEgressQueueMap5 OBJECT-TYPE
SYNTAX INTEGER(0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the egress queue of frames tagged with 802.1p priority 5.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This feature may require a media converter module firmware upgrade)."
::= { cm1110ConfigEntry 32 }
cm1110ConfigPriorityToEgressQueueMap6 OBJECT-TYPE
SYNTAX INTEGER(0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the egress queue of frames tagged with 802.1p priority 6.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This feature may require a media converter module firmware upgrade)."
::= { cm1110ConfigEntry 33 }
cm1110ConfigPriorityToEgressQueueMap7 OBJECT-TYPE
SYNTAX INTEGER(0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the egress queue of frames tagged with 802.1p priority 7.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This feature may require a media converter module firmware upgrade)."
::= { cm1110ConfigEntry 34 }
cm1110ConfigCopper8021pPriority OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Use 802.1p tag priority.
(This feature may require a media converter module firmware upgrade)."
::= { cm1110ConfigEntry 35 }
cm1110ConfigCopperIpTosPriority OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Use IP TOS priority.
(This feature may require a media converter module firmware upgrade)."
::= { cm1110ConfigEntry 36 }
cm1110ConfigCopperPriorityPrecedence OBJECT-TYPE
SYNTAX INTEGER {
notApplicable(-1),
priority8021p(0),
priorityIpTos(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure priority precedence.
(This feature may require a media converter module firmware upgrade)."
::= { cm1110ConfigEntry 37 }
cm1110ConfigCopperCongestionPolicy OBJECT-TYPE
SYNTAX INTEGER {
notApplicable(-1),
strict(0),
weighted(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure priority congestion policy.
(This feature may require a media converter module firmware upgrade)."
::= { cm1110ConfigEntry 38 }
cm1110ConfigCopperPriorityMap0 OBJECT-TYPE
SYNTAX INTEGER(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Change the priority of frames tagged with 802.1p priority 0.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This feature may require a media converter module firmware upgrade)."
::= { cm1110ConfigEntry 39 }
cm1110ConfigCopperPriorityMap1 OBJECT-TYPE
SYNTAX INTEGER(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Change the priority of frames tagged with 802.1p priority 1.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This feature may require a media converter module firmware upgrade)."
::= { cm1110ConfigEntry 40 }
cm1110ConfigCopperPriorityMap2 OBJECT-TYPE
SYNTAX INTEGER(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Change the priority of frames tagged with 802.1p priority 2.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This feature may require a media converter module firmware upgrade)."
::= { cm1110ConfigEntry 41 }
cm1110ConfigCopperPriorityMap3 OBJECT-TYPE
SYNTAX INTEGER(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Change the priority of frames tagged with 802.1p priority 3.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This feature may require a media converter module firmware upgrade)."
::= { cm1110ConfigEntry 42 }
cm1110ConfigCopperPriorityMap4 OBJECT-TYPE
SYNTAX INTEGER(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Change the priority of frames tagged with 802.1p priority 4.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This feature may require a media converter module firmware upgrade)."
::= { cm1110ConfigEntry 43 }
cm1110ConfigCopperPriorityMap5 OBJECT-TYPE
SYNTAX INTEGER(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Change the priority of frames tagged with 802.1p priority 5.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This feature may require a media converter module firmware upgrade)."
::= { cm1110ConfigEntry 44 }
cm1110ConfigCopperPriorityMap6 OBJECT-TYPE
SYNTAX INTEGER(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Change the priority of frames tagged with 802.1p priority 6.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This feature may require a media converter module firmware upgrade)."
::= { cm1110ConfigEntry 45 }
cm1110ConfigCopperPriorityMap7 OBJECT-TYPE
SYNTAX INTEGER(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Change the priority of frames tagged with 802.1p priority 7.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This feature may require a media converter module firmware upgrade)."
::= { cm1110ConfigEntry 46 }
cm1110ConfigCopperIngressLimit OBJECT-TYPE
SYNTAX INTEGER {
notApplicable(-1),
rateUnlimited(0),
rate64kbps(1),
rate128kbps(2),
rate192kbps(3),
rate256kbps(4),
rate320kbps(5),
rate384kbps(6),
rate512kbps(7),
rate768kbps(8),
rate1mbps (9),
rate2mbps (10),
rate3mbps (11),
rate4mbps (12),
rate5mbps (13),
rate6mbps (14),
rate7mbps (15),
rate8mbps (16),
rate9mbps (17),
rate10mbps (18),
rate20mbps (19),
rate30mbps (20),
rate40mbps (21),
rate50mbps (22),
rate60mbps (23),
rate70mbps (24),
rate80mbps (25),
rate90mbps (26),
rate100mbps(27),
rate200mbps(28),
rate300mbps(29),
rate400mbps(30),
rate500mbps(31),
rate600mbps(32),
rate700mbps(33),
rate800mbps(34),
rate900mbps(35)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set a limit on the rate of incoming packets.
(This feature may require a media converter module firmware upgrade)."
::= { cm1110ConfigEntry 47 }
cm1110ConfigCopperEgressLimit OBJECT-TYPE
SYNTAX INTEGER {
notApplicable(-1),
rateUnlimited(0),
rate64kbps(1),
rate128kbps(2),
rate192kbps(3),
rate256kbps(4),
rate320kbps(5),
rate384kbps(6),
rate512kbps(7),
rate768kbps(8),
rate1mbps (9),
rate2mbps (10),
rate3mbps (11),
rate4mbps (12),
rate5mbps (13),
rate6mbps (14),
rate7mbps (15),
rate8mbps (16),
rate9mbps (17),
rate10mbps (18),
rate20mbps (19),
rate30mbps (20),
rate40mbps (21),
rate50mbps (22),
rate60mbps (23),
rate70mbps (24),
rate80mbps (25),
rate90mbps (26),
rate100mbps(27),
rate200mbps(28),
rate300mbps(29),
rate400mbps(30),
rate500mbps(31),
rate600mbps(32),
rate700mbps(33),
rate800mbps(34),
rate900mbps(35)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set a limit on the rate of outgoing packets.
(This feature may require a media converter module firmware upgrade)."
::= { cm1110ConfigEntry 48 }
cm1110ConfigCopperDiscardTaggedFrames OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable discarding of tagged frames.
(This feature may require a media converter module firmware upgrade)."
::= { cm1110ConfigEntry 49 }
cm1110ConfigCopperDiscardUntaggedFrames OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable discarding of untagged frames.
(This feature may require a media converter module firmware upgrade)."
::= { cm1110ConfigEntry 50 }
cm1110ConfigCopperDefaultVlanId OBJECT-TYPE
SYNTAX INTEGER(0..4095)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the default VLAN ID to insert when tagging frames.
(This feature may require a media converter module firmware upgrade)."
::= { cm1110ConfigEntry 51 }
cm1110ConfigCopperDefaultPriority OBJECT-TYPE
SYNTAX INTEGER(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the default frame priority.
(This feature may require a media converter module firmware upgrade)."
::= { cm1110ConfigEntry 52 }
cm1110ConfigCopperVlanTaggingAction OBJECT-TYPE
SYNTAX INTEGER {
notApplicable(-1),
none(0),
untag(1),
tag(2),
doubleTag(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the default tagging action.
(This feature may require a media converter module firmware upgrade)."
::= { cm1110ConfigEntry 53 }
cm1110ConfigCopperFilterUnknownMulticast OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable filtering of multicast frames with an unknown destination
(This feature may require a media converter module firmware upgrade)."
::= { cm1110ConfigEntry 54 }
cm1110ConfigCopperFilterUnknownUnicast OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable filtering of unicast frames with an unknown destination
(This feature may require a media converter module firmware upgrade)."
::= { cm1110ConfigEntry 55 }
cm1110ConfigFiber8021pPriority OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Use 802.1p tag priority.
(This feature may require a media converter module firmware upgrade)."
::= { cm1110ConfigEntry 56 }
cm1110ConfigFiberIpTosPriority OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Use IP TOS priority.
(This feature may require a media converter module firmware upgrade)."
::= { cm1110ConfigEntry 57 }
cm1110ConfigFiberPriorityPrecedence OBJECT-TYPE
SYNTAX INTEGER {
notApplicable(-1),
priority8021p(0),
priorityIpTos(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure priority precedence.
(This feature may require a media converter module firmware upgrade)."
::= { cm1110ConfigEntry 58 }
cm1110ConfigFiberCongestionPolicy OBJECT-TYPE
SYNTAX INTEGER {
notApplicable(-1),
strict(0),
weighted(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure priority congestion policy.
(This feature may require a media converter module firmware upgrade)."
::= { cm1110ConfigEntry 59 }
cm1110ConfigFiberPriorityMap0 OBJECT-TYPE
SYNTAX INTEGER(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Change the priority of frames tagged with 802.1p priority 0.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This feature may require a media converter module firmware upgrade)."
::= { cm1110ConfigEntry 60 }
cm1110ConfigFiberPriorityMap1 OBJECT-TYPE
SYNTAX INTEGER(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Change the priority of frames tagged with 802.1p priority 1.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This feature may require a media converter module firmware upgrade)."
::= { cm1110ConfigEntry 61 }
cm1110ConfigFiberPriorityMap2 OBJECT-TYPE
SYNTAX INTEGER(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Change the priority of frames tagged with 802.1p priority 2.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This feature may require a media converter module firmware upgrade)."
::= { cm1110ConfigEntry 62 }
cm1110ConfigFiberPriorityMap3 OBJECT-TYPE
SYNTAX INTEGER(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Change the priority of frames tagged with 802.1p priority 3.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This feature may require a media converter module firmware upgrade)."
::= { cm1110ConfigEntry 63 }
cm1110ConfigFiberPriorityMap4 OBJECT-TYPE
SYNTAX INTEGER(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Change the priority of frames tagged with 802.1p priority 4.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This feature may require a media converter module firmware upgrade)."
::= { cm1110ConfigEntry 64 }
cm1110ConfigFiberPriorityMap5 OBJECT-TYPE
SYNTAX INTEGER(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Change the priority of frames tagged with 802.1p priority 5.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This feature may require a media converter module firmware upgrade)."
::= { cm1110ConfigEntry 65 }
cm1110ConfigFiberPriorityMap6 OBJECT-TYPE
SYNTAX INTEGER(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Change the priority of frames tagged with 802.1p priority 6.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This feature may require a media converter module firmware upgrade)."
::= { cm1110ConfigEntry 66 }
cm1110ConfigFiberPriorityMap7 OBJECT-TYPE
SYNTAX INTEGER(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Change the priority of frames tagged with 802.1p priority 7.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This feature may require a media converter module firmware upgrade)."
::= { cm1110ConfigEntry 67 }
cm1110ConfigFiberIngressLimit OBJECT-TYPE
SYNTAX INTEGER {
notApplicable(-1),
rateUnlimited(0),
rate64kbps(1),
rate128kbps(2),
rate192kbps(3),
rate256kbps(4),
rate320kbps(5),
rate384kbps(6),
rate512kbps(7),
rate768kbps(8),
rate1mbps (9),
rate2mbps (10),
rate3mbps (11),
rate4mbps (12),
rate5mbps (13),
rate6mbps (14),
rate7mbps (15),
rate8mbps (16),
rate9mbps (17),
rate10mbps (18),
rate20mbps (19),
rate30mbps (20),
rate40mbps (21),
rate50mbps (22),
rate60mbps (23),
rate70mbps (24),
rate80mbps (25),
rate90mbps (26),
rate100mbps(27),
rate200mbps(28),
rate300mbps(29),
rate400mbps(30),
rate500mbps(31),
rate600mbps(32),
rate700mbps(33),
rate800mbps(34),
rate900mbps(35)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set a limit on the rate of incoming packets.
(This feature may require a media converter module firmware upgrade)."
::= { cm1110ConfigEntry 68 }
cm1110ConfigFiberEgressLimit OBJECT-TYPE
SYNTAX INTEGER {
notApplicable(-1),
rateUnlimited(0),
rate64kbps(1),
rate128kbps(2),
rate192kbps(3),
rate256kbps(4),
rate320kbps(5),
rate384kbps(6),
rate512kbps(7),
rate768kbps(8),
rate1mbps (9),
rate2mbps (10),
rate3mbps (11),
rate4mbps (12),
rate5mbps (13),
rate6mbps (14),
rate7mbps (15),
rate8mbps (16),
rate9mbps (17),
rate10mbps (18),
rate20mbps (19),
rate30mbps (20),
rate40mbps (21),
rate50mbps (22),
rate60mbps (23),
rate70mbps (24),
rate80mbps (25),
rate90mbps (26),
rate100mbps(27),
rate200mbps(28),
rate300mbps(29),
rate400mbps(30),
rate500mbps(31),
rate600mbps(32),
rate700mbps(33),
rate800mbps(34),
rate900mbps(35)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set a limit on the rate of outgoing packets.
(This feature may require a media converter module firmware upgrade)."
::= { cm1110ConfigEntry 69 }
cm1110ConfigFiberDiscardTaggedFrames OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable discarding of tagged frames.
(This feature may require a media converter module firmware upgrade)."
::= { cm1110ConfigEntry 70 }
cm1110ConfigFiberDiscardUntaggedFrames OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable discarding of untagged frames.
(This feature may require a media converter module firmware upgrade)."
::= { cm1110ConfigEntry 71 }
cm1110ConfigFiberDefaultVlanId OBJECT-TYPE
SYNTAX INTEGER(0..4095)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the default VLAN ID to insert when tagging frames.
(This feature may require a media converter module firmware upgrade)."
::= { cm1110ConfigEntry 72 }
cm1110ConfigFiberDefaultPriority OBJECT-TYPE
SYNTAX INTEGER(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the default frame priority.
(This feature may require a media converter module firmware upgrade)."
::= { cm1110ConfigEntry 73 }
cm1110ConfigFiberVlanTaggingAction OBJECT-TYPE
SYNTAX INTEGER {
notApplicable(-1),
none(0),
untag(1),
tag(2),
doubleTag(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the default tagging action.
(This feature may require a media converter module firmware upgrade)."
::= { cm1110ConfigEntry 74 }
cm1110ConfigFiberFilterUnknownMulticast OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable filtering of multicast frames with an unknown destination
(This feature may require a media converter module firmware upgrade)."
::= { cm1110ConfigEntry 75 }
cm1110ConfigFiberFilterUnknownUnicast OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable filtering of unicast frames with an unknown destination
(This feature may require a media converter module firmware upgrade)."
::= { cm1110ConfigEntry 76 }
cm1110ConfigFiberSgmiiInterface OBJECT-TYPE
SYNTAX EnableDisableValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies whether fiber SGMII interface is enabled."
::= { cm1110ConfigEntry 77 }
--
--
-- cm1110ConfigEntry
--
--
-- cm1110LedTable
--
cm1110LedTable OBJECT-TYPE
SYNTAX SEQUENCE OF Cm1110LedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of CM-1110 type media converter module's LED status information."
::= { cm1110RateConv 3 }
cm1110LedEntry OBJECT-TYPE
SYNTAX Cm1110LedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of the table, each relating to a separate CM-1110 type
media converter module."
INDEX { mcrChassisIndex, cm1110LedSlotIndex }
::= { cm1110LedTable 1 }
Cm1110LedEntry ::=
SEQUENCE {
cm1110LedSlotIndex SlotNumber,
cm1110LedPWR INTEGER,
cm1110LedFDF INTEGER,
cm1110LedLKF INTEGER,
cm1110LedCopperSpeed INTEGER,
cm1110LedFDC INTEGER,
cm1110LedLKC INTEGER
}
cm1110LedSlotIndex OBJECT-TYPE
SYNTAX SlotNumber
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Slot number the CM-1110 type module is currently inserted"
::= { cm1110LedEntry 2 }
cm1110LedPWR OBJECT-TYPE
SYNTAX INTEGER {
off(0),
onGreen(1),
blinking(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the status of the power (PWR) LED on the media converter module.
Possible status values are:
off(0) - No power to the module
onGreen(1) - Power being applied to module
blinking(2) - Fiber loopback enabled"
::= { cm1110LedEntry 3 }
cm1110LedFDF OBJECT-TYPE
SYNTAX INTEGER {
offHalfDuplex(0),
onFullDuplex(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the status of the Full Duplex Fiber (FDF) LED
on the media converter module."
::= { cm1110LedEntry 4 }
cm1110LedLKF OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the status of the link fiber (LKF) LED on the
media converter module.
Possible status values are:
off(0) - No fiber link
on(1) - Fiber link present"
::= { cm1110LedEntry 5 }
cm1110LedCopperSpeed OBJECT-TYPE
SYNTAX INTEGER {
off10Mbps(0),
onYellow100Mbps(1),
onGreen1000Mbps(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the status of the link copper speed (100/1000)
LED on the management module."
::= { cm1110LedEntry 6 }
cm1110LedFDC OBJECT-TYPE
SYNTAX INTEGER {
offHalfDuplex(0),
onFullDuplex(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the status of the Full Duplex Copper (FDC) LED
on the media converter module."
::= { cm1110LedEntry 7 }
cm1110LedLKC OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the status of the link copper (LKC) LED on the
media converter module. Possible status values are:
off(0) - No copper link
on(1) - Copper link present"
::= { cm1110LedEntry 8 }
--
-- end of cm1110LedTable
--
--
-- cm1110RateConvStatsTable
--
cm1110RateConvStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF Cm1110RateConvStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of CM-1110 type media converter module's configuration and status type
information."
::= { cm1110RateConv 4 }
cm1110RateConvStatsEntry OBJECT-TYPE
SYNTAX Cm1110RateConvStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of the table, each relating to a separate CM-1110 type
media converter module."
INDEX { mcrChassisIndex, cm1110StatsSlotIndex, cm1110MediaPortIndex }
::= { cm1110RateConvStatsTable 1 }
Cm1110RateConvStatsEntry ::=
SEQUENCE {
cm1110StatsSlotIndex SlotNumber,
cm1110MediaPortIndex INTEGER,
cm1110PortInDiscards Counter32,
cm1110PortInFiltered INTEGER,
cm1110PortInGoodOctets Counter32,
cm1110PortHCInGoodOctets Counter64,
cm1110PortInBadOctets Counter32,
cm1110PortInUnicasts Counter32,
cm1110PortInBroadcasts Counter32,
cm1110PortInMulticasts Counter32,
cm1110PortInPauses Counter32,
cm1110PortInUnderSizes Counter32,
cm1110PortInFragments Counter32,
cm1110PortInOversizes Counter32,
cm1110PortInJabbers Counter32,
cm1110PortInRxErrs Counter32,
cm1110PortInFcsErrs Counter32,
cm1110PortPkts64Octets Counter32,
cm1110PortPkts65to127Octets Counter32,
cm1110PortPkts128to255Octets Counter32,
cm1110PortPkts256to511Octets Counter32,
cm1110PortPkts512to1023Octets Counter32,
cm1110PortPkts1024toMaxOctets Counter32,
cm1110PortOutOctets Counter32,
cm1110PortHCOutOctets Counter64,
cm1110PortOutFiltered INTEGER,
cm1110PortOutUnicasts Counter32,
cm1110PortOutBroadcasts Counter32,
cm1110PortOutMulticasts Counter32,
cm1110PortOutPauses Counter32,
cm1110PortDeferreds Counter32,
cm1110PortCollisions Counter32,
cm1110PortSingles Counter32,
cm1110PortMultiples Counter32,
cm1110PortExcessives Counter32,
cm1110PortLates Counter32,
cm1110PortOutFcsErrs Counter32,
cm1110PortResetCounters YesNoValue
}
cm1110StatsSlotIndex OBJECT-TYPE
SYNTAX SlotNumber
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Slot number the CM-1110 type module is currently inserted"
::= { cm1110RateConvStatsEntry 2 }
cm1110MediaPortIndex OBJECT-TYPE
SYNTAX INTEGER {
copper(1),
fiber(2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Media converter module port index indicating which media port the statistical
counters are associated with."
::= { cm1110RateConvStatsEntry 3 }
cm1110PortInDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A counter that counts the number of good, non-filtered frames that
normally would have been forwarded, but could not due to lack of
buffer space."
::= { cm1110RateConvStatsEntry 4 }
cm1110PortInFiltered OBJECT-TYPE
SYNTAX INTEGER(0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A counter that counts the number of good frames that were filtered
due to ingress switch policy rules. "
::= { cm1110RateConvStatsEntry 5 }
cm1110PortInGoodOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An ingress counter that is the sum of lengths of all good Ethernet
frames received on the media port."
::= { cm1110RateConvStatsEntry 6 }
cm1110PortHCInGoodOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An ingress counter that is the sum of lengths of all good Ethernet
frames received on the media port. This object is a 64-bit version of
cm1110PortInGoodOctets."
::= { cm1110RateConvStatsEntry 7 }
cm1110PortInBadOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An ingress counter that is the sum of lengths of all bad Ethernet
frames received on the media port.."
::= { cm1110RateConvStatsEntry 8 }
cm1110PortInUnicasts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An ingress counter that counts the number of good frames received that
have a Unicast destination MAC address."
::= { cm1110RateConvStatsEntry 9 }
cm1110PortInBroadcasts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An ingress counter that counts the number of good frames received that
have a Broadcast destination MAC address."
::= { cm1110RateConvStatsEntry 10 }
cm1110PortInMulticasts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An ingress counter that counts the number of good frames received that
have a Multicast destination MAC address. This count does not include
frames counted in the cm1110PortInPauses or the cm1110PortInBroadcasts
objects."
::= { cm1110RateConvStatsEntry 11 }
cm1110PortInPauses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An ingress counter that counts the number of good frames reachieved that
have a Pause destination MAC address."
::= { cm1110RateConvStatsEntry 12 }
cm1110PortInUnderSizes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An ingress counter that counts the number of frames received with a
length less that 64 octets but with a valid FCS."
::= { cm1110RateConvStatsEntry 13 }
cm1110PortInFragments OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An ingress counter that counts the number of frames received with a
length less that 64 octets and an invalid FCS."
::= { cm1110RateConvStatsEntry 14 }
cm1110PortInOversizes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An ingress counter that counts the number of frames received with a
length more than the maximum packet size but with a valid FCS.
The maximum packet size can be set using the cm1110ConfigMaxPacketsSize
object."
::= { cm1110RateConvStatsEntry 15 }
cm1110PortInJabbers OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An ingress counter that counts the number of frames received with a
length more than the maximum packet size but with a invalid FCS.
The maximum packet size can be set using the cm1110ConfigMaxPacketsSize
object."
::= { cm1110RateConvStatsEntry 16 }
cm1110PortInRxErrs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An ingress counter that counts the number of frames received with an
RxErr signal from the PHY."
::= { cm1110RateConvStatsEntry 17 }
cm1110PortInFcsErrs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An ingress counter that counts the number of frames received with a
CRC error not counted in the cm1110PortInFragments,
cm1110PortInFcsErr, or the cm1110PortInRxErr objects."
::= { cm1110RateConvStatsEntry 18 }
cm1110PortPkts64Octets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A Histogram counter that counts the number of frames received and
transmitted with a length of exactly 64 Octets, including those with
errors."
::= { cm1110RateConvStatsEntry 19 }
cm1110PortPkts65to127Octets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A Histogram counter that counts the number of frames received and
transmitted with a length of between 65 and 127 Octets inclusive,
including those with errors."
::= { cm1110RateConvStatsEntry 20 }
cm1110PortPkts128to255Octets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A Histogram counter that counts the number of frames received and
transmitted with a length of between 128 and 255 Octets inclusive,
including those with errors."
::= { cm1110RateConvStatsEntry 21 }
cm1110PortPkts256to511Octets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A Histogram counter that counts the number of frames received and
transmitted with a length of between 256 and 511 Octets inclusive,
including those with errors."
::= { cm1110RateConvStatsEntry 22 }
cm1110PortPkts512to1023Octets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A Histogram counter that counts the number of frames received and
transmitted with a length of between 512 and 1023 Octets inclusive,
including those with errors."
::= { cm1110RateConvStatsEntry 23 }
cm1110PortPkts1024toMaxOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A Histogram counter that counts the number of frames received and
transmitted with a length of between 1024 and maximum packet size
octets inclusive, including those with errors.
The maximum packet size can be set using the cm1110ConfigMaxPacketsSize
object."
::= { cm1110RateConvStatsEntry 24 }
cm1110PortOutOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An Egress counter that is the sum of lengths of all good Ethernet
frames sent on the media port."
::= { cm1110RateConvStatsEntry 25 }
cm1110PortHCOutOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An Egress counter that is the sum of lengths of all good Ethernet
frames sent on the media port. This object is a 64-bit version of
cm1110PortOutOctets."
::= { cm1110RateConvStatsEntry 26 }
cm1110PortOutFiltered OBJECT-TYPE
SYNTAX INTEGER(0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A counter that counts the number of good frames that were filtered
due to egress switch policy rules."
::= { cm1110RateConvStatsEntry 27 }
cm1110PortOutUnicasts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An Egress counter that counts the number of good frames sent that
have a Unicast destination MAC address."
::= { cm1110RateConvStatsEntry 28 }
cm1110PortOutBroadcasts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An Egress counter that counts the number of good frames sent that
have a Broadcast destination MAC address."
::= { cm1110RateConvStatsEntry 29 }
cm1110PortOutMulticasts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An Egress counter that counts the number of good frames sent that
have a Multicast destination MAC address. This count does not include
frames counted in the cm1110PortOutPauses or the cm1110PortOutBroadcasts
objects."
::= { cm1110RateConvStatsEntry 30 }
cm1110PortOutPauses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An Egress counter that counts the number of good frames reachieved that
have a Pause destination MAC address."
::= { cm1110RateConvStatsEntry 31 }
cm1110PortDeferreds OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An Egress counter that counts the number of successfully transmitted
frames that experienced no collisions but are delayed because the
medium was busy during the first attempt. This counter is applicable
in half-duplex only."
::= { cm1110RateConvStatsEntry 32 }
cm1110PortCollisions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An Egress counter that counts the number of collision events seen by
the MAC not including those counted in cm1110PortSingles,
cm1110PortMultiple , cm1110PortExcessives or cm1110PortLates objects.
This counter is applicable in half-duplex only."
::= { cm1110RateConvStatsEntry 33 }
cm1110PortSingles OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An Egress counter that counts the number of successfully transmitted
frames that experienced exactly one collision. This counter is
applicable in half-duplex only."
::= { cm1110RateConvStatsEntry 34 }
cm1110PortMultiples OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An Egress counter that counts the number of successfully transmitted
frames that experienced more than one collision. This counter is
aplicable in half-duplex only."
::= { cm1110RateConvStatsEntry 35 }
cm1110PortExcessives OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An Egress counter that counts the number frames dropped in the transmit
MAC because the frame experienced 16 consecutive collisions. This
counter is applicable in half-duplex only. "
::= { cm1110RateConvStatsEntry 36 }
cm1110PortLates OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An Egress counter that counts the number times a collision is detected
later than 512 bits-times into the transmission of a frame. This
counter is applicable in half-duplex only."
::= { cm1110RateConvStatsEntry 37 }
cm1110PortOutFcsErrs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An Egress counter that counts the number frames transmitted with an
invalid FCS. "
::= { cm1110RateConvStatsEntry 38 }
cm1110PortResetCounters OBJECT-TYPE
SYNTAX YesNoValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allows the resetting of all cm1110RateConvStats statistical counters
for this port. "
::= { cm1110RateConvStatsEntry 39 }
--
-- end of cm1110RateConvStatsTable
--
--
-- cm1110RateConvAvctTable
--
cm1110RateConvAvctTable OBJECT-TYPE
SYNTAX SEQUENCE OF Cm1110RateConvAvctEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of CM-1110 type media converter module's "
::= { cm1110RateConv 5 }
cm1110RateConvAvctEntry OBJECT-TYPE
SYNTAX Cm1110RateConvAvctEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of the table, each relating to a separate fiber or copper
port on the CM-1110 type media converter module."
INDEX { mcrChassisIndex, cm1110AvctSlotIndex }
::= { cm1110RateConvAvctTable 1 }
Cm1110RateConvAvctEntry ::=
SEQUENCE {
cm1110AvctSlotIndex SlotNumber,
cm1110AvctStart YesNoValue,
cm1110AvctStatus INTEGER,
cm1110AvctTxRxPair1Results INTEGER,
cm1110AvctTxRxPair1Amplitude DisplayString,
cm1110AvctTxRxPair1Distance DisplayString,
cm1110AvctTxRxPair2Results INTEGER,
cm1110AvctTxRxPair2Amplitude DisplayString,
cm1110AvctTxRxPair2Distance DisplayString,
cm1110AvctTxRxPair3Results INTEGER,
cm1110AvctTxRxPair3Amplitude DisplayString,
cm1110AvctTxRxPair3Distance DisplayString,
cm1110AvctTxRxPair4Results INTEGER,
cm1110AvctTxRxPair4Amplitude DisplayString,
cm1110AvctTxRxPair4Distance DisplayString
}
cm1110AvctSlotIndex OBJECT-TYPE
SYNTAX SlotNumber
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Slot number the CM-1110 type module is currently inserted"
::= { cm1110RateConvAvctEntry 2 }
cm1110AvctStart OBJECT-TYPE
SYNTAX YesNoValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set this self-clearing variable to yes initiate the Advanced Virtual
Cable Test. Note: During the test, no network data will be passed. "
::= { cm1110RateConvAvctEntry 3 }
cm1110AvctStatus OBJECT-TYPE
SYNTAX INTEGER {
notStarted(0),
inProgress(1),
testComplete(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the state of the Advanced Virtual Cable Tester. "
::= { cm1110RateConvAvctEntry 4 }
cm1110AvctTxRxPair1Results OBJECT-TYPE
SYNTAX INTEGER {
normal(0),
shortDetected(1),
openDetected(2),
testFailed(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Test result code returned from Virtual Cable Test of the Tx/Rx
pair one."
::= { cm1110RateConvAvctEntry 5 }
cm1110AvctTxRxPair1Amplitude OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Amplitude of Tx/Rx pair one in millivolts when test result codes is
short or open."
::= { cm1110RateConvAvctEntry 6 }
cm1110AvctTxRxPair1Distance OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Distance in meters to fault when test result codes for Tx/Rx pair
one is short or open. "
::= { cm1110RateConvAvctEntry 7 }
cm1110AvctTxRxPair2Results OBJECT-TYPE
SYNTAX INTEGER {
normal(0),
shortDetected(1),
openDetected(2),
testFailed(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Test result code returned from Virtual Cable Test of the Tx/Rx
pair two."
::= { cm1110RateConvAvctEntry 8 }
cm1110AvctTxRxPair2Amplitude OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Amplitude of Tx/Rx pair two in millivolts when test result codes is
short or open."
::= { cm1110RateConvAvctEntry 9 }
cm1110AvctTxRxPair2Distance OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Distance in meters to fault when test result codes for Tx/Rx pair
two is short or open. "
::= { cm1110RateConvAvctEntry 10 }
cm1110AvctTxRxPair3Results OBJECT-TYPE
SYNTAX INTEGER {
normal(0),
shortDetected(1),
openDetected(2),
testFailed(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Test result code returned from Virtual Cable Test of the Tx/Rx
pair three."
::= { cm1110RateConvAvctEntry 11 }
cm1110AvctTxRxPair3Amplitude OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Amplitude of Tx/Rx pair three in millivolts when test result codes is
short or open."
::= { cm1110RateConvAvctEntry 12 }
cm1110AvctTxRxPair3Distance OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Distance in meters to fault when test result codes for Tx/Rx pair
three is short or open. "
::= { cm1110RateConvAvctEntry 13 }
cm1110AvctTxRxPair4Results OBJECT-TYPE
SYNTAX INTEGER {
normal(0),
shortDetected(1),
openDetected(2),
testFailed(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Test result code returned from Virtual Cable Test of Tx/Rx
pair four."
::= { cm1110RateConvAvctEntry 14 }
cm1110AvctTxRxPair4Amplitude OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Amplitude of Tx/Rx pair four in millivolts when test result codes is
short or open."
::= { cm1110RateConvAvctEntry 15 }
cm1110AvctTxRxPair4Distance OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Distance in meters to fault when test result codes for Tx/Rx pair
four is short or open. "
::= { cm1110RateConvAvctEntry 16 }
--
-- cm1110RateConvAvctTable
--
--
-- end of cm1110RateConv
--
--
-- cm110RateConv - 10/100 rate converter media converter modules
--
cm110RateConv OBJECT IDENTIFIER ::= { mcrModuleTypes 4 }
--
-- cm110RateConvTable
--
cm110RateConvTable OBJECT-TYPE
SYNTAX SEQUENCE OF Cm110RateConvEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of CM-110 type media converter module's configuration and status type
information."
::= { cm110RateConv 1 }
cm110RateConvEntry OBJECT-TYPE
SYNTAX Cm110RateConvEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of the table, each relating to a separate CM-110 type
media converter module."
INDEX { mcrChassisIndex, cm110SlotIndex }
::= { cm110RateConvTable 1 }
Cm110RateConvEntry ::=
SEQUENCE {
cm110SlotIndex SlotNumber,
cm110Modelname DisplayString,
cm110ModelDesc DisplayString,
cm110HwJmp5ConfigMode INTEGER,
cm110HwJmp6AutoMDIX INTEGER,
cm110HwSw1TpAutoNegotiation INTEGER,
cm110HwSw2LinkMode INTEGER,
cm110HwSw3FarEndFault INTEGER,
cm110HwSw4TpDuplex INTEGER,
cm110HwSw5TpSpeed INTEGER,
cm110HwSw6FiberDuplex INTEGER,
cm110HwSw7Loopback INTEGER,
cm110FiberLinkStatus INTEGER,
cm110FiberConnType INTEGER,
cm110FiberSpeed INTEGER,
cm110FiberFarEndFault INTEGER,
cm110FiberReceiveStatus INTEGER,
cm110FiberLoopBack EnableDisableValue,
cm110CopperLinkStatus INTEGER,
cm110CopperConnType INTEGER,
cm110CopperAutoNegState INTEGER,
cm110CopperSpeed INTEGER,
cm110CopperDuplex INTEGER,
cm110CopperCrossOver INTEGER,
cm110CopperPause INTEGER,
cm110CopperLPRFStatus INTEGER
}
cm110SlotIndex OBJECT-TYPE
SYNTAX SlotNumber
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Slot number the CM-110 type module is currently inserted"
::= { cm110RateConvEntry 2 }
cm110Modelname OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the model of media converter module present in the
chassis"
::= { cm110RateConvEntry 3 }
cm110ModelDesc OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies a static description of the media converter module present
in the chassis"
::= { cm110RateConvEntry 4 }
cm110HwJmp5ConfigMode OBJECT-TYPE
SYNTAX INTEGER {
hardwareSwitches(0),
auto(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the media converter module's ConfigMode, set by hardware
switch on the media converter module. When this object is set to hardwareSwitches(0), the
media converter module will disable configuration control from the management
module's software and all configuration control comes from the media
module's hardware switches or jumpers. "
::= { cm110RateConvEntry 5 }
cm110HwJmp6AutoMDIX OBJECT-TYPE
SYNTAX INTEGER {
mdix(0),
auto(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the media converter module's hardware Auto MDIX jumper
settings. "
::= { cm110RateConvEntry 6 }
cm110HwSw1TpAutoNegotiation OBJECT-TYPE
SYNTAX INTEGER {
swDownDisabled(0),
swUpEnabled(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current switch setting for copper auto-negotiation."
::= { cm110RateConvEntry 7 }
cm110HwSw2LinkMode OBJECT-TYPE
SYNTAX INTEGER {
swDownNormalMode(0),
swUpSmartLinkPassthroughMode(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current switch setting for Link Mode."
::= { cm110RateConvEntry 8 }
cm110HwSw3FarEndFault OBJECT-TYPE
SYNTAX INTEGER {
swDownDisabled(0),
swUpEnabled(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current switch setting for Far End Fault."
::= { cm110RateConvEntry 9 }
cm110HwSw4TpDuplex OBJECT-TYPE
SYNTAX INTEGER {
swDownHalf(0),
swUpFull(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current switch setting for copper duplex."
::= { cm110RateConvEntry 10 }
cm110HwSw5TpSpeed OBJECT-TYPE
SYNTAX INTEGER {
swDown10Mbps(0),
swUp100Mbps(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current switch setting for Link Mode."
::= { cm110RateConvEntry 11 }
cm110HwSw6FiberDuplex OBJECT-TYPE
SYNTAX INTEGER {
swDownHalf(0),
swUpFull(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current switch setting for fiber duplex."
::= { cm110RateConvEntry 12 }
cm110HwSw7Loopback OBJECT-TYPE
SYNTAX INTEGER {
swDownEnabled(0),
swUpDisabled(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current switch setting for fiber loopback mode."
::= { cm110RateConvEntry 13 }
cm110FiberLinkStatus OBJECT-TYPE
SYNTAX INTEGER {
down(0),
up(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current fiber link status."
::= { cm110RateConvEntry 14 }
cm110FiberConnType OBJECT-TYPE
SYNTAX INTEGER {
sc(0),
lc(1),
st(2),
sfp(3),
fc(5),
mtrj(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's fiber port connector type."
::= { cm110RateConvEntry 15 }
cm110FiberSpeed OBJECT-TYPE
SYNTAX INTEGER {
speed100Mbps(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's fiber port speed in megabits per second."
::= { cm110RateConvEntry 16 }
cm110FiberFarEndFault OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
ok(1),
receivingFEF(2),
sendingFEF(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current fiber Far End Fault status."
::= { cm110RateConvEntry 17 }
cm110FiberReceiveStatus OBJECT-TYPE
SYNTAX INTEGER {
fault(0),
ok(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the status of whether light is being received
on the fiber port"
::= { cm110RateConvEntry 18 }
cm110FiberLoopBack OBJECT-TYPE
SYNTAX EnableDisableValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
This object is read-only if the media converter module's ConfigMode jumper is
set to hardwareSwitches(0)."
::= { cm110RateConvEntry 19 }
cm110CopperLinkStatus OBJECT-TYPE
SYNTAX INTEGER {
down(0),
up(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current copper link status."
::= { cm110RateConvEntry 20 }
cm110CopperConnType OBJECT-TYPE
SYNTAX INTEGER {
rj45(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's copper connector type."
::= { cm110RateConvEntry 21 }
cm110CopperAutoNegState OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
complete(1),
inProgress(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current copper auto-negotiation state."
::= { cm110RateConvEntry 22 }
cm110CopperSpeed OBJECT-TYPE
SYNTAX INTEGER {
speed10Mbs(0),
speed100Mbps(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If copper auto-negotiation state is complete then this object
indicates the media converter module's current copper auto-negotiated speed
setting. If auto-negotiation is not complete then the value returned
should be ignored."
::= { cm110RateConvEntry 23 }
cm110CopperDuplex OBJECT-TYPE
SYNTAX INTEGER {
half(0),
full(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If copper auto-negotiation state is complete then this object
indicates the media converter module's current copper auto-negotiated duplex
setting. If auto-negotiation is not complete then the value returned
should be ignored."
::= { cm110RateConvEntry 24 }
cm110CopperCrossOver OBJECT-TYPE
SYNTAX INTEGER {
mdi(0),
mdix(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If copper auto-negotiation state is complete then this object
indicates the media converter module's current copper auto-negotiated MDI/MDI-X
setting. If auto-negotiation is not complete then the value returned
should be ignored."
::= { cm110RateConvEntry 25 }
cm110CopperPause OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
symmetrical(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If copper auto-negotiation state is complete then this object indicates
the media converter module's current copper auto-negotiated pause (flow control)
setting. If auto-negotiation is not complete then the value returned
should be ignored."
::= { cm110RateConvEntry 26 }
cm110CopperLPRFStatus OBJECT-TYPE
SYNTAX INTEGER {
ok(0),
remoteFault(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's fiber Link Partner Remote Fault status."
::= { cm110RateConvEntry 27 }
--
-- end of cm110RateConvTable
--
--
-- cm110ConfigTable
--
cm110ConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF Cm110ConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of CM-110 type media converter module's configuration and status type
information."
::= { cm110RateConv 2 }
cm110ConfigEntry OBJECT-TYPE
SYNTAX Cm110ConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of the table, each relating to a separate CM-110 type
media converter module."
INDEX { mcrChassisIndex, cm110ConfigSlotIndex }
::= { cm110ConfigTable 1 }
Cm110ConfigEntry ::=
SEQUENCE {
cm110ConfigSlotIndex SlotNumber,
cm110ConfigStatus ContainerStatus,
cm110ConfigModuleName DisplayString,
cm110ConfigLinkMode INTEGER,
cm110ConfigFiberFarEndFault INTEGER,
cm110ConfigMaxPacketSize INTEGER,
cm110ConfigFiberPortName DisplayString,
cm110ConfigFiberPortEnable YesNoValue,
cm110ConfigFiberDuplex INTEGER,
cm110ConfigCopperPortName DisplayString,
cm110ConfigCopperPortEnable YesNoValue,
cm110ConfigCopperAutoNegotiation INTEGER,
cm110ConfigCopperAutoNegAdv10HDX YesNoValue,
cm110ConfigCopperAutoNegAdv10FDX YesNoValue,
cm110ConfigCopperAutoNegAdv100HDX YesNoValue,
cm110ConfigCopperAutoNegAdv100FDX YesNoValue,
cm110ConfigCopperSpeed INTEGER,
cm110ConfigCopperDuplex INTEGER,
cm110ConfigCopperCrossOver INTEGER,
cm110ConfigCopperPause INTEGER,
cm110ConfigCopperExtendDistance EnableDisableValue,
cm110ConfigUnidirectionalEthernet INTEGER,
cm110ConfigPriorityToEgressQueueMap0 INTEGER,
cm110ConfigPriorityToEgressQueueMap1 INTEGER,
cm110ConfigPriorityToEgressQueueMap2 INTEGER,
cm110ConfigPriorityToEgressQueueMap3 INTEGER,
cm110ConfigPriorityToEgressQueueMap4 INTEGER,
cm110ConfigPriorityToEgressQueueMap5 INTEGER,
cm110ConfigPriorityToEgressQueueMap6 INTEGER,
cm110ConfigPriorityToEgressQueueMap7 INTEGER,
cm110ConfigCopper8021pPriority OnOffValue,
cm110ConfigCopperIpTosPriority OnOffValue,
cm110ConfigCopperPriorityPrecedence INTEGER,
cm110ConfigCopperCongestionPolicy INTEGER,
cm110ConfigCopperPriorityMap0 INTEGER,
cm110ConfigCopperPriorityMap1 INTEGER,
cm110ConfigCopperPriorityMap2 INTEGER,
cm110ConfigCopperPriorityMap3 INTEGER,
cm110ConfigCopperPriorityMap4 INTEGER,
cm110ConfigCopperPriorityMap5 INTEGER,
cm110ConfigCopperPriorityMap6 INTEGER,
cm110ConfigCopperPriorityMap7 INTEGER,
cm110ConfigCopperIngressLimit INTEGER,
cm110ConfigCopperEgressLimit INTEGER,
cm110ConfigCopperDiscardTaggedFrames OnOffValue,
cm110ConfigCopperDiscardUntaggedFrames OnOffValue,
cm110ConfigCopperDefaultVlanId INTEGER,
cm110ConfigCopperDefaultPriority INTEGER,
cm110ConfigCopperVlanTaggingAction INTEGER,
cm110ConfigCopperFilterUnknownMulticast OnOffValue,
cm110ConfigCopperFilterUnknownUnicast OnOffValue,
cm110ConfigFiber8021pPriority OnOffValue,
cm110ConfigFiberIpTosPriority OnOffValue,
cm110ConfigFiberPriorityPrecedence INTEGER,
cm110ConfigFiberCongestionPolicy INTEGER,
cm110ConfigFiberPriorityMap0 INTEGER,
cm110ConfigFiberPriorityMap1 INTEGER,
cm110ConfigFiberPriorityMap2 INTEGER,
cm110ConfigFiberPriorityMap3 INTEGER,
cm110ConfigFiberPriorityMap4 INTEGER,
cm110ConfigFiberPriorityMap5 INTEGER,
cm110ConfigFiberPriorityMap6 INTEGER,
cm110ConfigFiberPriorityMap7 INTEGER,
cm110ConfigFiberIngressLimit INTEGER,
cm110ConfigFiberEgressLimit INTEGER,
cm110ConfigFiberDiscardTaggedFrames OnOffValue,
cm110ConfigFiberDiscardUntaggedFrames OnOffValue,
cm110ConfigFiberDefaultVlanId INTEGER,
cm110ConfigFiberDefaultPriority INTEGER,
cm110ConfigFiberVlanTaggingAction INTEGER,
cm110ConfigFiberFilterUnknownMulticast OnOffValue,
cm110ConfigFiberFilterUnknownUnicast OnOffValue
}
cm110ConfigSlotIndex OBJECT-TYPE
SYNTAX SlotNumber
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Slot number the CM-110 type module is currently inserted"
::= { cm110ConfigEntry 2 }
cm110ConfigStatus OBJECT-TYPE
SYNTAX ContainerStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When you perform a GET on this variable, one of
the following values will be returned:
1-Indicates that the container folder is active with no changes.
2-Indicates that the container folder is active with change(s).
Once you have completed setting the variables in a folder, you
will want to submit your changes to the management module. To do
this, set the Status variable to 4. If you want to discard the
changes, set the Status variable to 6.
4-Indicates that the changes in the container folder are to be
submitted to the management module, verified and and saved to flash.
6-Indicates that the changes in the container folder are to be
discarded."
::= { cm110ConfigEntry 3 }
cm110ConfigModuleName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..63))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies a user configurable name for the media converter module
present in the chassis. "
::= { cm110ConfigEntry 4 }
cm110ConfigLinkMode OBJECT-TYPE
SYNTAX INTEGER {
standard(0),
linkPassthrough(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the Link Mode for the media converter module. This object
is read-only if the media converter module's ConfigMode jumper is set to
hardwareSwitches(0)."
::= { cm110ConfigEntry 5 }
cm110ConfigFiberFarEndFault OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the Fiber Fault Alert setting for the media
module. This setting is always enabled if Link Mode is set to linkPassthrough.
This object is read-only if the media converter module's ConfigMode
jumper is set to hardwareSwitches(0). "
::= { cm110ConfigEntry 6 }
cm110ConfigMaxPacketSize OBJECT-TYPE
SYNTAX INTEGER {
maxpacket1522(0),
maxpacket2048(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the media converter module's maximum packet size setting
This object is read-only if the media converter module's ConfigMode jumper is
set to hardwareSwitches(0)."
::= { cm110ConfigEntry 7 }
cm110ConfigFiberPortName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..8))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies a user definable name for the fiber port."
::= { cm110ConfigEntry 8 }
cm110ConfigFiberPortEnable OBJECT-TYPE
SYNTAX YesNoValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies whether the fiber port is enabled. "
::= { cm110ConfigEntry 9 }
cm110ConfigFiberDuplex OBJECT-TYPE
SYNTAX INTEGER {
full(0),
half(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the fiber port duplex setting. "
::= { cm110ConfigEntry 10 }
cm110ConfigCopperPortName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..8))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies a user definable name for the copper port. "
::= { cm110ConfigEntry 11 }
cm110ConfigCopperPortEnable OBJECT-TYPE
SYNTAX YesNoValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies whether the fiber port is enabled. "
::= { cm110ConfigEntry 12 }
cm110ConfigCopperAutoNegotiation OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the whether copper auto-negotiation is
enabled. This object is read-only if the media converter module's ConfigMode
jumper is set to hardwareSwitches(0)."
::= { cm110ConfigEntry 13 }
cm110ConfigCopperAutoNegAdv10HDX OBJECT-TYPE
SYNTAX YesNoValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object controls whether or the copper port advertises willingness
to connect at 10Mbps, half duplex. This setting is ignored when
auto-negotiation is disabled."
::= { cm110ConfigEntry 14 }
cm110ConfigCopperAutoNegAdv10FDX OBJECT-TYPE
SYNTAX YesNoValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object controls whether or the copper port advertises willingness
to connect at 10Mbps, full duplex. This setting is ignored when
auto-negotiation is disabled."
::= { cm110ConfigEntry 15 }
cm110ConfigCopperAutoNegAdv100HDX OBJECT-TYPE
SYNTAX YesNoValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object controls whether or the copper port advertises willingness
to connect at 100Mbps, half duplex. This setting is ignored when
auto-negotiation is disabled."
::= { cm110ConfigEntry 16 }
cm110ConfigCopperAutoNegAdv100FDX OBJECT-TYPE
SYNTAX YesNoValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object controls whether or the copper port advertises willingness
to connect at 100Mbps, full duplex. This setting is ignored when
auto-negotiation is disabled."
::= { cm110ConfigEntry 17 }
cm110ConfigCopperSpeed OBJECT-TYPE
SYNTAX INTEGER {
speed10Mbs(0),
speed100Mbps(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the current copper speed in megabits per
second. This object is ignored if auto-negotiation is enabled.
This object is ignored if auto-negotiation is enabled "
::= { cm110ConfigEntry 18 }
cm110ConfigCopperDuplex OBJECT-TYPE
SYNTAX INTEGER {
full(0),
half(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the copper duplex setting. This object is
ignored if auto-negotiation is enabled This object is read-only
if the media converter module's ConfigMode jumper is set to hardwareSwitches(0)."
::= { cm110ConfigEntry 19 }
cm110ConfigCopperCrossOver OBJECT-TYPE
SYNTAX INTEGER {
auto(0),
mdi(1),
mdix(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the copper MDI/MDI-X setting.This object
is read-only if the media converter module's ConfigMode jumper is set to"
::= { cm110ConfigEntry 20 }
cm110ConfigCopperPause OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the copper's pause (flow control) settings.
This object is read-only if the media converter module's ConfigMode jumper
is set to hardwareSwitches(0)."
::= { cm110ConfigEntry 21 }
cm110ConfigCopperExtendDistance OBJECT-TYPE
SYNTAX EnableDisableValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When using cable exceeding 100 meters, the 10BASE-T this feature
should be enabled."
::= { cm110ConfigEntry 22 }
cm110ConfigUnidirectionalEthernet OBJECT-TYPE
SYNTAX INTEGER {
notApplicable(-1),
disabled(0),
copperToFiber(1),
fiberToCopper(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Restrict the flow of Ethernet traffic to a single direction.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This feature may require a media converter module firmware upgrade)."
::= { cm110ConfigEntry 23 }
cm110ConfigPriorityToEgressQueueMap0 OBJECT-TYPE
SYNTAX INTEGER(0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the egress queue of frames tagged with 802.1p priority 0.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This feature may require a media converter module firmware upgrade)."
::= { cm110ConfigEntry 24 }
cm110ConfigPriorityToEgressQueueMap1 OBJECT-TYPE
SYNTAX INTEGER(0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the egress queue of frames tagged with 802.1p priority 1.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This feature may require a media converter module firmware upgrade)."
::= { cm110ConfigEntry 25 }
cm110ConfigPriorityToEgressQueueMap2 OBJECT-TYPE
SYNTAX INTEGER(0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the egress queue of frames tagged with 802.1p priority 2.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This feature may require a media converter module firmware upgrade)."
::= { cm110ConfigEntry 26 }
cm110ConfigPriorityToEgressQueueMap3 OBJECT-TYPE
SYNTAX INTEGER(0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the egress queue of frames tagged with 802.1p priority 3.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This feature may require a media converter module firmware upgrade)."
::= { cm110ConfigEntry 27 }
cm110ConfigPriorityToEgressQueueMap4 OBJECT-TYPE
SYNTAX INTEGER(0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the egress queue of frames tagged with 802.1p priority 4.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This feature may require a media converter module firmware upgrade)."
::= { cm110ConfigEntry 28 }
cm110ConfigPriorityToEgressQueueMap5 OBJECT-TYPE
SYNTAX INTEGER(0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the egress queue of frames tagged with 802.1p priority 5.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This feature may require a media converter module firmware upgrade)."
::= { cm110ConfigEntry 29 }
cm110ConfigPriorityToEgressQueueMap6 OBJECT-TYPE
SYNTAX INTEGER(0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the egress queue of frames tagged with 802.1p priority 6.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This feature may require a media converter module firmware upgrade)."
::= { cm110ConfigEntry 30 }
cm110ConfigPriorityToEgressQueueMap7 OBJECT-TYPE
SYNTAX INTEGER(0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the egress queue of frames tagged with 802.1p priority 7.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This feature may require a media converter module firmware upgrade)."
::= { cm110ConfigEntry 31 }
cm110ConfigCopper8021pPriority OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Use 802.1p tag priority.
(This feature may require a media converter module firmware upgrade)."
::= { cm110ConfigEntry 32 }
cm110ConfigCopperIpTosPriority OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Use IP TOS priority.
(This feature may require a media converter module firmware upgrade)."
::= { cm110ConfigEntry 33 }
cm110ConfigCopperPriorityPrecedence OBJECT-TYPE
SYNTAX INTEGER {
notApplicable(-1),
priority8021p(0),
priorityIpTos(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure priority precedence.
(This feature may require a media converter module firmware upgrade)."
::= { cm110ConfigEntry 34 }
cm110ConfigCopperCongestionPolicy OBJECT-TYPE
SYNTAX INTEGER {
notApplicable(-1),
strict(0),
weighted(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure priority congestion policy.
(This feature may require a media converter module firmware upgrade)."
::= { cm110ConfigEntry 35 }
cm110ConfigCopperPriorityMap0 OBJECT-TYPE
SYNTAX INTEGER(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Change the priority of frames tagged with 802.1p priority 0.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This feature may require a media converter module firmware upgrade)."
::= { cm110ConfigEntry 36 }
cm110ConfigCopperPriorityMap1 OBJECT-TYPE
SYNTAX INTEGER(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Change the priority of frames tagged with 802.1p priority 1.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This feature may require a media converter module firmware upgrade)."
::= { cm110ConfigEntry 37 }
cm110ConfigCopperPriorityMap2 OBJECT-TYPE
SYNTAX INTEGER(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Change the priority of frames tagged with 802.1p priority 2.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This feature may require a media converter module firmware upgrade)."
::= { cm110ConfigEntry 38 }
cm110ConfigCopperPriorityMap3 OBJECT-TYPE
SYNTAX INTEGER(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Change the priority of frames tagged with 802.1p priority 3.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This feature may require a media converter module firmware upgrade)."
::= { cm110ConfigEntry 39 }
cm110ConfigCopperPriorityMap4 OBJECT-TYPE
SYNTAX INTEGER(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Change the priority of frames tagged with 802.1p priority 4.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This feature may require a media converter module firmware upgrade)."
::= { cm110ConfigEntry 40 }
cm110ConfigCopperPriorityMap5 OBJECT-TYPE
SYNTAX INTEGER(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Change the priority of frames tagged with 802.1p priority 5.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This feature may require a media converter module firmware upgrade)."
::= { cm110ConfigEntry 41 }
cm110ConfigCopperPriorityMap6 OBJECT-TYPE
SYNTAX INTEGER(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Change the priority of frames tagged with 802.1p priority 6.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This feature may require a media converter module firmware upgrade)."
::= { cm110ConfigEntry 42 }
cm110ConfigCopperPriorityMap7 OBJECT-TYPE
SYNTAX INTEGER(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Change the priority of frames tagged with 802.1p priority 7.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This feature may require a media converter module firmware upgrade)."
::= { cm110ConfigEntry 43 }
cm110ConfigCopperIngressLimit OBJECT-TYPE
SYNTAX INTEGER {
notApplicable(-1),
rateUnlimited(0),
rate64kbps(1),
rate128kbps(2),
rate192kbps(3),
rate256kbps(4),
rate320kbps(5),
rate384kbps(6),
rate512kbps(7),
rate768kbps(8),
rate1mbps (9),
rate2mbps (10),
rate3mbps (11),
rate4mbps (12),
rate5mbps (13),
rate6mbps (14),
rate7mbps (15),
rate8mbps (16),
rate9mbps (17),
rate10mbps (18),
rate20mbps (19),
rate30mbps (20),
rate40mbps (21),
rate50mbps (22),
rate60mbps (23),
rate70mbps (24),
rate80mbps (25),
rate90mbps (26)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set a limit on the rate of incoming packets.
(This feature may require a media converter module firmware upgrade)."
::= { cm110ConfigEntry 44 }
cm110ConfigCopperEgressLimit OBJECT-TYPE
SYNTAX INTEGER {
notApplicable(-1),
rateUnlimited(0),
rate64kbps(1),
rate128kbps(2),
rate192kbps(3),
rate256kbps(4),
rate320kbps(5),
rate384kbps(6),
rate512kbps(7),
rate768kbps(8),
rate1mbps (9),
rate2mbps (10),
rate3mbps (11),
rate4mbps (12),
rate5mbps (13),
rate6mbps (14),
rate7mbps (15),
rate8mbps (16),
rate9mbps (17),
rate10mbps (18),
rate20mbps (19),
rate30mbps (20),
rate40mbps (21),
rate50mbps (22),
rate60mbps (23),
rate70mbps (24),
rate80mbps (25),
rate90mbps (26)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set a limit on the rate of outgoing packets.
(This feature may require a media converter module firmware upgrade)."
::= { cm110ConfigEntry 45 }
cm110ConfigCopperDiscardTaggedFrames OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable discarding of tagged frames.
(This feature may require a media converter module firmware upgrade)."
::= { cm110ConfigEntry 46 }
cm110ConfigCopperDiscardUntaggedFrames OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable discarding of untagged frames.
(This feature may require a media converter module firmware upgrade)."
::= { cm110ConfigEntry 47 }
cm110ConfigCopperDefaultVlanId OBJECT-TYPE
SYNTAX INTEGER(0..4095)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the default VLAN ID to insert when tagging frames.
(This feature may require a media converter module firmware upgrade)."
::= { cm110ConfigEntry 48 }
cm110ConfigCopperDefaultPriority OBJECT-TYPE
SYNTAX INTEGER(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the default frame priority.
(This feature may require a media converter module firmware upgrade)."
::= { cm110ConfigEntry 49 }
cm110ConfigCopperVlanTaggingAction OBJECT-TYPE
SYNTAX INTEGER {
notApplicable(-1),
none(0),
untag(1),
tag(2),
doubleTag(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the default tagging action.
(This feature may require a media converter module firmware upgrade)."
::= { cm110ConfigEntry 50 }
cm110ConfigCopperFilterUnknownMulticast OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable filtering of multicast frames with an unknown destination
(This feature may require a media converter module firmware upgrade)."
::= { cm110ConfigEntry 51 }
cm110ConfigCopperFilterUnknownUnicast OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable filtering of unicast frames with an unknown destination
(This feature may require a media converter module firmware upgrade)."
::= { cm110ConfigEntry 52 }
cm110ConfigFiber8021pPriority OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Use 802.1p tag priority.
(This feature may require a media converter module firmware upgrade)."
::= { cm110ConfigEntry 53 }
cm110ConfigFiberIpTosPriority OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Use IP TOS priority.
(This feature may require a media converter module firmware upgrade)."
::= { cm110ConfigEntry 54 }
cm110ConfigFiberPriorityPrecedence OBJECT-TYPE
SYNTAX INTEGER {
notApplicable(-1),
priority8021p(0),
priorityIpTos(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure priority precedence.
(This feature may require a media converter module firmware upgrade)."
::= { cm110ConfigEntry 55 }
cm110ConfigFiberCongestionPolicy OBJECT-TYPE
SYNTAX INTEGER {
notApplicable(-1),
strict(0),
weighted(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure priority congestion policy.
(This feature may require a media converter module firmware upgrade)."
::= { cm110ConfigEntry 56 }
cm110ConfigFiberPriorityMap0 OBJECT-TYPE
SYNTAX INTEGER(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Change the priority of frames tagged with 802.1p priority 0.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This feature may require a media converter module firmware upgrade)."
::= { cm110ConfigEntry 57 }
cm110ConfigFiberPriorityMap1 OBJECT-TYPE
SYNTAX INTEGER(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Change the priority of frames tagged with 802.1p priority 1.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This feature may require a media converter module firmware upgrade)."
::= { cm110ConfigEntry 58 }
cm110ConfigFiberPriorityMap2 OBJECT-TYPE
SYNTAX INTEGER(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Change the priority of frames tagged with 802.1p priority 2.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This feature may require a media converter module firmware upgrade)."
::= { cm110ConfigEntry 59 }
cm110ConfigFiberPriorityMap3 OBJECT-TYPE
SYNTAX INTEGER(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Change the priority of frames tagged with 802.1p priority 3.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This feature may require a media converter module firmware upgrade)."
::= { cm110ConfigEntry 60 }
cm110ConfigFiberPriorityMap4 OBJECT-TYPE
SYNTAX INTEGER(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Change the priority of frames tagged with 802.1p priority 4.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This feature may require a media converter module firmware upgrade)."
::= { cm110ConfigEntry 61 }
cm110ConfigFiberPriorityMap5 OBJECT-TYPE
SYNTAX INTEGER(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Change the priority of frames tagged with 802.1p priority 5.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This feature may require a media converter module firmware upgrade)."
::= { cm110ConfigEntry 62 }
cm110ConfigFiberPriorityMap6 OBJECT-TYPE
SYNTAX INTEGER(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Change the priority of frames tagged with 802.1p priority 6.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This feature may require a media converter module firmware upgrade)."
::= { cm110ConfigEntry 63 }
cm110ConfigFiberPriorityMap7 OBJECT-TYPE
SYNTAX INTEGER(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Change the priority of frames tagged with 802.1p priority 7.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This feature may require a media converter module firmware upgrade)."
::= { cm110ConfigEntry 64 }
cm110ConfigFiberIngressLimit OBJECT-TYPE
SYNTAX INTEGER {
notApplicable(-1),
rateUnlimited(0),
rate64kbps(1),
rate128kbps(2),
rate192kbps(3),
rate256kbps(4),
rate320kbps(5),
rate384kbps(6),
rate512kbps(7),
rate768kbps(8),
rate1mbps (9),
rate2mbps (10),
rate3mbps (11),
rate4mbps (12),
rate5mbps (13),
rate6mbps (14),
rate7mbps (15),
rate8mbps (16),
rate9mbps (17),
rate10mbps (18),
rate20mbps (19),
rate30mbps (20),
rate40mbps (21),
rate50mbps (22),
rate60mbps (23),
rate70mbps (24),
rate80mbps (25),
rate90mbps (26)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set a limit on the rate of incoming packets.
(This feature may require a media converter module firmware upgrade)."
::= { cm110ConfigEntry 65 }
cm110ConfigFiberEgressLimit OBJECT-TYPE
SYNTAX INTEGER {
notApplicable(-1),
rateUnlimited(0),
rate64kbps(1),
rate128kbps(2),
rate192kbps(3),
rate256kbps(4),
rate320kbps(5),
rate384kbps(6),
rate512kbps(7),
rate768kbps(8),
rate1mbps (9),
rate2mbps (10),
rate3mbps (11),
rate4mbps (12),
rate5mbps (13),
rate6mbps (14),
rate7mbps (15),
rate8mbps (16),
rate9mbps (17),
rate10mbps (18),
rate20mbps (19),
rate30mbps (20),
rate40mbps (21),
rate50mbps (22),
rate60mbps (23),
rate70mbps (24),
rate80mbps (25),
rate90mbps (26)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set a limit on the rate of outgoing packets.
(This feature may require a media converter module firmware upgrade)."
::= { cm110ConfigEntry 66 }
cm110ConfigFiberDiscardTaggedFrames OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable discarding of tagged frames.
(This feature may require a media converter module firmware upgrade)."
::= { cm110ConfigEntry 67 }
cm110ConfigFiberDiscardUntaggedFrames OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable discarding of untagged frames.
(This feature may require a media converter module firmware upgrade)."
::= { cm110ConfigEntry 68 }
cm110ConfigFiberDefaultVlanId OBJECT-TYPE
SYNTAX INTEGER(0..4095)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the default VLAN ID to insert when tagging frames.
(This feature may require a media converter module firmware upgrade)."
::= { cm110ConfigEntry 69}
cm110ConfigFiberDefaultPriority OBJECT-TYPE
SYNTAX INTEGER(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the default frame priority.
(This feature may require a media converter module firmware upgrade)."
::= { cm110ConfigEntry 70 }
cm110ConfigFiberVlanTaggingAction OBJECT-TYPE
SYNTAX INTEGER {
notApplicable(-1),
none(0),
untag(1),
tag(2),
doubleTag(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the default tagging action.
(This feature may require a media converter module firmware upgrade)."
::= { cm110ConfigEntry 71 }
cm110ConfigFiberFilterUnknownMulticast OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable filtering of multicast frames with an unknown destination
(This feature may require a media converter module firmware upgrade)."
::= { cm110ConfigEntry 72}
cm110ConfigFiberFilterUnknownUnicast OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable filtering of unicast frames with an unknown destination
(This feature may require a media converter module firmware upgrade)."
::= { cm110ConfigEntry 73 }
--
-- end of cm110ConfigTable
--
--
-- cm110LedTable
--
cm110LedTable OBJECT-TYPE
SYNTAX SEQUENCE OF Cm110LedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of CM-110 type media converter module's LED status information."
::= { cm110RateConv 3 }
cm110LedEntry OBJECT-TYPE
SYNTAX Cm110LedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of the table, each relating to a separate CM-110 type
media converter module."
INDEX { mcrChassisIndex, cm110LedSlotIndex }
::= { cm110LedTable 1 }
Cm110LedEntry ::=
SEQUENCE {
cm110LedSlotIndex SlotNumber,
cm110LedPWR INTEGER,
cm110LedFDF INTEGER,
cm110LedLKF INTEGER,
cm110LedCopperSpeed INTEGER,
cm110LedFDC INTEGER,
cm110LedLKC INTEGER
}
cm110LedSlotIndex OBJECT-TYPE
SYNTAX SlotNumber
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Slot number the CM-110 type module is currently inserted"
::= { cm110LedEntry 2 }
cm110LedPWR OBJECT-TYPE
SYNTAX INTEGER {
off(0),
onGreen(1),
blinking(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the status of the power (PWR) LED on the media converter module.
Possible status values are:
off(0) - No power to the module
onGreen(1) - Power being applied to module
blinking(2) - Fiber loopback enabled"
::= { cm110LedEntry 3 }
cm110LedFDF OBJECT-TYPE
SYNTAX INTEGER {
offHalfDuplex(0),
onFullDuplex(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the status of the Full Duplex Fiber (FDF) LED
on the media converter module."
::= { cm110LedEntry 4 }
cm110LedLKF OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the status of the link fiber (LKF) LED on the
media converter module.
Possible status values are:
off(0) - No fiber link
on(1) - Fiber link present"
::= { cm110LedEntry 5 }
cm110LedCopperSpeed OBJECT-TYPE
SYNTAX INTEGER {
off10Mbps(0),
onGreen100Mbps(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the status of the link copper speed (100/1000)
LED on the media converter module."
::= { cm110LedEntry 6 }
cm110LedFDC OBJECT-TYPE
SYNTAX INTEGER {
offHalfDuplex(0),
onFullDuplex(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the status of the Full Duplex Copper (FDC) LED
on the media converter module."
::= { cm110LedEntry 7 }
cm110LedLKC OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the status of the link copper (LKC) LED on the
media converter module. Possible status values are:
off(0) - No copper link
on(1) - Copper link present"
::= { cm110LedEntry 8 }
--
-- end of cm110LedTable
--
--
-- cm110RateConvStatsTable
--
cm110RateConvStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF Cm110RateConvStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of CM-110 media converter module's configuration and status type
information."
::= { cm110RateConv 4 }
cm110RateConvStatsEntry OBJECT-TYPE
SYNTAX Cm110RateConvStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of the table, each relating to a separate CM-110 type
media converter module."
INDEX { mcrChassisIndex, cm110StatsSlotIndex, cm110MediaPortIndex }
::= { cm110RateConvStatsTable 1 }
Cm110RateConvStatsEntry ::=
SEQUENCE {
cm110StatsSlotIndex SlotNumber,
cm110MediaPortIndex INTEGER,
cm110PortRxErrors INTEGER,
cm110PortTxCollisions INTEGER,
cm110PortInFiltered INTEGER,
cm110PortInGoodOctets Counter32,
cm110PortInBadOctets Counter32,
cm110PortInUnicasts Counter32,
cm110PortInBroadcasts Counter32,
cm110PortInMulticasts Counter32,
cm110PortInPauses Counter32,
cm110PortInUnderSizes Counter32,
cm110PortInFragments Counter32,
cm110PortInOversizes Counter32,
cm110PortInJabbers Counter32,
cm110PortInMACRcvErrs Counter32,
cm110PortInFcsErrs Counter32,
cm110PortPkts64Octets Counter32,
cm110PortPkts65to127Octets Counter32,
cm110PortPkts128to255Octets Counter32,
cm110PortPkts256to511Octets Counter32,
cm110PortPkts512to1023Octets Counter32,
cm110PortPkts1024toMaxOctets Counter32,
cm110PortOutOctets Counter32,
cm110PortOutUnicasts Counter32,
cm110PortOutBroadcasts Counter32,
cm110PortOutMulticasts Counter32,
cm110PortOutPauses Counter32,
cm110PortDeferreds Counter32,
cm110PortCollisions Counter32,
cm110PortSingles Counter32,
cm110PortMultiples Counter32,
cm110PortExcessives Counter32,
cm110PortLates Counter32,
cm110PortOutFcsErrs Counter32,
cm110PortResetCounters YesNoValue
}
cm110StatsSlotIndex OBJECT-TYPE
SYNTAX SlotNumber
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Slot number the CM-110 type module is currently inserted"
::= { cm110RateConvStatsEntry 2 }
cm110MediaPortIndex OBJECT-TYPE
SYNTAX INTEGER {
copper(1),
fiber(2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Media converter module port index indicating which media port the statistical
counters are associated with."
::= { cm110RateConvStatsEntry 3 }
cm110PortRxErrors OBJECT-TYPE
SYNTAX INTEGER(0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of bad frames received."
::= { cm110RateConvStatsEntry 4 }
cm110PortTxCollisions OBJECT-TYPE
SYNTAX INTEGER(0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of TX collisions encountered."
::= { cm110RateConvStatsEntry 5 }
cm110PortInFiltered OBJECT-TYPE
SYNTAX INTEGER(0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A counter that counts the number of good frames that were filtered
due to ingress switch policy rules. "
::= { cm110RateConvStatsEntry 6 }
cm110PortInGoodOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An ingress counter that is the sum of lengths of all good Ethernet
frames received on the media port."
::= { cm110RateConvStatsEntry 7 }
cm110PortInBadOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An ingress counter that is the sum of lengths of all bad Ethernet
frames received on the media port.."
::= { cm110RateConvStatsEntry 8 }
cm110PortInUnicasts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An ingress counter that counts the number of good frames received that
have a Unicast destination MAC address."
::= { cm110RateConvStatsEntry 9 }
cm110PortInBroadcasts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An ingress counter that counts the number of good frames received that
have a Broadcast destination MAC address."
::= { cm110RateConvStatsEntry 10 }
cm110PortInMulticasts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An ingress counter that counts the number of good frames received that
have a Multicast destination MAC address. This count does not include
frames counted in the cm1110PortInPauses or the cm1110PortInBroadcasts
objects."
::= { cm110RateConvStatsEntry 11 }
cm110PortInPauses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An ingress counter that counts the number of good frames received that
have a Pause destination MAC address."
::= { cm110RateConvStatsEntry 12 }
cm110PortInUnderSizes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An ingress counter that counts the number of frames received with a
length less that 64 octets but with a valid FCS."
::= { cm110RateConvStatsEntry 13 }
cm110PortInFragments OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An ingress counter that counts the number of frames received with a
length less that 64 octets and an invalid FCS."
::= { cm110RateConvStatsEntry 14 }
cm110PortInOversizes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An ingress counter that counts the number of frames received with a
length more than the maximum packet size but with a valid FCS.
The maximum packet size can be set using the cm110ConfigMaxPacketsSize
object."
::= { cm110RateConvStatsEntry 15 }
cm110PortInJabbers OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An ingress counter that counts the number of frames received with a
length more than the maximum packet size but with a invalid FCS.
The maximum packet size can be set using the cm110ConfigMaxPacketsSize
object."
::= { cm110RateConvStatsEntry 16 }
cm110PortInMACRcvErrs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An ingress counter of the number of Rx errors on the receive
side of the MAC"
::= { cm110RateConvStatsEntry 17 }
cm110PortInFcsErrs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An ingress counter of the number of FCS Errors."
::= { cm110RateConvStatsEntry 18 }
cm110PortPkts64Octets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A Histogram counter that counts the number of frames received and
transmitted with a length of exactly 64 Octets, including those with
errors."
::= { cm110RateConvStatsEntry 19 }
cm110PortPkts65to127Octets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A Histogram counter that counts the number of frames received and
transmitted with a length of between 65 and 127 Octets inclusive,
including those with errors."
::= { cm110RateConvStatsEntry 20 }
cm110PortPkts128to255Octets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A Histogram counter that counts the number of frames received and
transmitted with a length of between 128 and 255 Octets inclusive,
including those with errors."
::= { cm110RateConvStatsEntry 21 }
cm110PortPkts256to511Octets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A Histogram counter that counts the number of frames received and
transmitted with a length of between 256 and 511 Octets inclusive,
including those with errors."
::= { cm110RateConvStatsEntry 22 }
cm110PortPkts512to1023Octets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A Histogram counter that counts the number of frames received and
transmitted with a length of between 512 and 1023 Octets inclusive,
including those with errors."
::= { cm110RateConvStatsEntry 23 }
cm110PortPkts1024toMaxOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A Histogram counter that counts the number of frames received and
transmitted with a length of between 1024 and maximum packet size
octets inclusive, including those with errors.
The maximum packet size can be set using the cm1110ConfigMaxPacketsSize
object."
::= { cm110RateConvStatsEntry 24 }
cm110PortOutOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An Egress counter that is the sum of lengths of all good Ethernet
frames sent on the media port."
::= { cm110RateConvStatsEntry 25 }
cm110PortOutUnicasts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An Egress counter that counts the number of good frames sent that
have a Unicast destination MAC address."
::= { cm110RateConvStatsEntry 26 }
cm110PortOutBroadcasts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An Egress counter that counts the number of good frames sent that
have a Broadcast destination MAC address."
::= { cm110RateConvStatsEntry 27 }
cm110PortOutMulticasts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An Egress counter that counts the number of good frames sent that
have a Multicast destination MAC address. This count does not include
frames counted in the cm1110PortOutPauses or the cm1110PortOutBroadcasts
objects."
::= { cm110RateConvStatsEntry 28 }
cm110PortOutPauses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An Egress counter that counts the number of good frames received that
have a Pause destination MAC address."
::= { cm110RateConvStatsEntry 29 }
cm110PortDeferreds OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An Egress counter that counts the number of successfully transmitted
frames that experienced no collsions but are delayed because the
medium was busy during the first attempt. This counter is applicable
in half-duplex only."
::= { cm110RateConvStatsEntry 30 }
cm110PortCollisions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An Egress counter that counts the number of collision events seen by
the MAC not including those counted in cm110PortSingles,
cm110PortMultiple , cm1110PortExcessives or cm110PortLates objects.
This counter is applicable in half-duplex only."
::= { cm110RateConvStatsEntry 31 }
cm110PortSingles OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An Egress counter that counts the number of successfully transmitted
frames that experienced exactly one collision. This counter is
applicable in half-duplex only."
::= { cm110RateConvStatsEntry 32 }
cm110PortMultiples OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An Egress counter that counts the number of successfully transmitted
frames that experienced more than one collision. This counter is
aplicable in half-duplex only."
::= { cm110RateConvStatsEntry 33 }
cm110PortExcessives OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An Egress counter that counts the number frames dropped in the transmit
MAC because the frame experienced 16 consecutive collisions. This
counter is applicable in half-duplex only. "
::= { cm110RateConvStatsEntry 34 }
cm110PortLates OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An Egress counter that counts the number times a collision is detected
later than 512 bits-times into the transmission of a frame. This
counter is applicable in half-duplex only."
::= { cm110RateConvStatsEntry 35 }
cm110PortOutFcsErrs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An Egress counter that counts the number frames transmitted with an
invalid FCS. "
::= { cm110RateConvStatsEntry 36 }
cm110PortResetCounters OBJECT-TYPE
SYNTAX YesNoValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allows the resetting of all cm110RateConvStats statistical counters
for this port."
::= { cm110RateConvStatsEntry 37 }
--
-- end of cm110RateConvStatsTable
--
--
-- cm110RateConvVctTable
--
cm110RateConvVctTable OBJECT-TYPE
SYNTAX SEQUENCE OF Cm110RateConvVctEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of CM-110 type media converter module's "
::= { cm110RateConv 5 }
cm110RateConvVctEntry OBJECT-TYPE
SYNTAX Cm110RateConvVctEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of the table, each relating to a separate fiber or copper
port on the CM-110 type media converter module."
INDEX { mcrChassisIndex, cm110VctSlotIndex }
::= { cm110RateConvVctTable 1 }
Cm110RateConvVctEntry ::=
SEQUENCE {
cm110VctSlotIndex SlotNumber,
cm110VctStart YesNoValue,
cm110VctStatus INTEGER,
cm110VctTxPairResults INTEGER,
cm110VctTxPairAmplitude DisplayString,
cm110VctTxPairDistance DisplayString,
cm110VctRxPairResults INTEGER,
cm110VctRxPairAmplitude DisplayString,
cm110VctRxPairDistance DisplayString
}
cm110VctSlotIndex OBJECT-TYPE
SYNTAX SlotNumber
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Slot number the CM-1110 type module is currently inserted"
::= { cm110RateConvVctEntry 2 }
cm110VctStart OBJECT-TYPE
SYNTAX YesNoValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set this self-clearing variable to yes initiate the Advanced Virtual
Cable Test. Note: During the test, no network data will be passed."
::= { cm110RateConvVctEntry 3 }
cm110VctStatus OBJECT-TYPE
SYNTAX INTEGER {
notStarted(0),
inProgress(1),
testComplete(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the stat of the Advanced Virtual Cable Test. "
::= { cm110RateConvVctEntry 4 }
cm110VctTxPairResults OBJECT-TYPE
SYNTAX INTEGER {
normal(0),
shortDetected(1),
openDetected(2),
testFailed(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Test result code returned from Virtual Cable Test of the Tx
pair."
::= { cm110RateConvVctEntry 5 }
cm110VctTxPairAmplitude OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Amplitude of Tx pair in Volts."
::= { cm110RateConvVctEntry 6 }
cm110VctTxPairDistance OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Distance in meters to fault when test result codes is
short or open. "
::= { cm110RateConvVctEntry 7 }
cm110VctRxPairResults OBJECT-TYPE
SYNTAX INTEGER {
normal(0),
shortDetected(1),
openDetected(2),
testFailed(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Test result code returned from Virtual Cable Test of the Rx
pair."
::= { cm110RateConvVctEntry 8 }
cm110VctRxPairAmplitude OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Amplitude of Rx pair in Volts."
::= { cm110RateConvVctEntry 9 }
cm110VctRxPairDistance OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Distance in meters to fault when test result codes is
short or open. "
::= { cm110RateConvVctEntry 10 }
--
-- cm110RateConvVctTable
--
--
-- end of cm110RateConv
--
--
-- mcrMgt - MCR-MGT management type modules.
--
mcrMgt OBJECT IDENTIFIER ::= { mcrModuleTypes 5 }
--
-- mcrMgtTable
--
mcrMgtTable OBJECT-TYPE
SYNTAX SEQUENCE OF McrMgtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of MCR-MGT management module status type information."
::= { mcrMgt 1 }
mcrMgtEntry OBJECT-TYPE
SYNTAX McrMgtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of the table, each relating to a separate MCR-MGT type
management module."
INDEX { mcrChassisIndex, mcrMgtSlotIndex }
::= { mcrMgtTable 1 }
McrMgtEntry ::=
SEQUENCE {
mcrMgtSlotIndex SlotNumber,
mcrMgtModelName DisplayString,
mcrMgtModelDesc DisplayString,
mcrMgtFailSafeBootLoaderVer DisplayString,
mcrMgtUpTime TimeTicks,
mcrMgtConsoleDSR OnOffValue
}
mcrMgtSlotIndex OBJECT-TYPE
SYNTAX SlotNumber
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Slot number the MCR-MGT module is currently inserted"
::= { mcrMgtEntry 2 }
mcrMgtModelName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the model name of management module present in the
chassis"
::= { mcrMgtEntry 3 }
mcrMgtModelDesc OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies a static description of the management module present
in the chassis"
::= { mcrMgtEntry 4 }
mcrMgtFailSafeBootLoaderVer OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the fail-safe bootloader version of the
management module present in the chassis"
::= { mcrMgtEntry 5 }
mcrMgtUpTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the time (in hundredths of a second) since the
management module was last re-initialized."
::= { mcrMgtEntry 6 }
mcrMgtConsoleDSR OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the current status of the DSR signal, (active or
inactive)"
::= { mcrMgtEntry 7 }
--
-- mcrMgtTable
--
--
-- mcrMgtConfigTable
--
mcrMgtConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF McrMgtConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of MCR-MGT management module Hardware configuration type information."
::= { mcrMgt 2 }
mcrMgtConfigEntry OBJECT-TYPE
SYNTAX McrMgtConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of the table, each relating to a separate MCR-MGT type
management module."
INDEX { mcrChassisIndex, mcrMgtConfigSlotIndex }
::= { mcrMgtConfigTable 1 }
McrMgtConfigEntry ::=
SEQUENCE {
mcrMgtConfigSlotIndex SlotNumber,
mcrMgtConfigStatus ContainerStatus,
mcrMgtConfigEthSpeedDuplex INTEGER,
mcrMgtConfigEthCrossover INTEGER,
mcrMgtConfigConsolePortEnabled YesNoValue,
mcrMgtConfigConsoleSpeed INTEGER,
mcrMgtConfigConsoleDataBits INTEGER,
mcrMgtConfigConsoleParity INTEGER,
mcrMgtConfigConsoleStopBits INTEGER,
mcrMgtConfigConsoleFlowControl INTEGER,
mcrMgtConfigConsoleMonitorDSR OnOffValue
}
mcrMgtConfigSlotIndex OBJECT-TYPE
SYNTAX SlotNumber
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Slot number the MCR-MGT module is currently inserted"
::= { mcrMgtConfigEntry 2 }
mcrMgtConfigStatus OBJECT-TYPE
SYNTAX ContainerStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When you perform a GET on this variable, one of
the following values will be returned:
1-Indicates that the container folder is active with no changes.
2-Indicates that the container folder is active with change(s).
Once you have completed setting the variables in a folder, you
will want to submit your changes to the management module. To do
this, set the Status variable to 4. If you want to discard the
changes, set the Status variable to 6.
4-Indicates that the changes in the container folder are to be
submitted to the management module, verified and and saved to flash.
6-Indicates that the changes in the container folder are to be
discarded."
::= { mcrMgtConfigEntry 3 }
mcrMgtConfigEthSpeedDuplex OBJECT-TYPE
SYNTAX INTEGER {
auto(0),
speed10Half(1),
speed10Full(2),
speed100Half(3),
speed100Full(4),
speed1000(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Define the Ethernet connection speed/duplex of the twisted pair interface."
::= { mcrMgtConfigEntry 4 }
mcrMgtConfigEthCrossover OBJECT-TYPE
SYNTAX INTEGER {
auto(0),
mdi(1),
mdix(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Define the Ethernet connection crossover TX/RX Pair orientation of the
twisted pair interface as auto(0), mdi(1) (straight through) or mdix(2)
(crossed over)."
::= { mcrMgtConfigEntry 5 }
mcrMgtConfigConsolePortEnabled OBJECT-TYPE
SYNTAX YesNoValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Determines whether the management module's console port is enabled."
::= { mcrMgtConfigEntry 6 }
mcrMgtConfigConsoleSpeed OBJECT-TYPE
SYNTAX INTEGER {
b9600(13),
b19200(14),
b38400(15),
b57600(16),
b115200(17)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the baud rate of the console port; keep in mind that
speed is affected by the length of the cable."
::= { mcrMgtConfigEntry 7 }
mcrMgtConfigConsoleDataBits OBJECT-TYPE
SYNTAX INTEGER {
d7(2),
d8(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the number of bits in a byte."
::= { mcrMgtConfigEntry 8 }
mcrMgtConfigConsoleParity OBJECT-TYPE
SYNTAX INTEGER {
none(0),
odd(1),
even(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies if you are using Even, Odd, or No parity on the console."
::= { mcrMgtConfigEntry 9 }
mcrMgtConfigConsoleStopBits OBJECT-TYPE
SYNTAX INTEGER {
s1(0),
s2(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the number of stop bits that follow a byte."
::= { mcrMgtConfigEntry 10 }
mcrMgtConfigConsoleFlowControl OBJECT-TYPE
SYNTAX INTEGER {
none(0),
soft(1),
hard(2),
both(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Defines whether the data flow is handled by the software (Soft), hardware (Hard),
both or None."
::= { mcrMgtConfigEntry 11 }
mcrMgtConfigConsoleMonitorDSR OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies whether the RS-232 signal DSR (Data Set Ready) should
be monitored, for the console port.
When DSR is monitored and the management module detects the DSR signal go inactive
then the current console management session will be reset. "
::= { mcrMgtConfigEntry 12 }
--
-- mcrMgtConfigTable
--
--
-- mcrMgtLedTable
--
mcrMgtLedTable OBJECT-TYPE
SYNTAX SEQUENCE OF McrMgtLedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of MCR-MGT management module LED information."
::= { mcrMgt 3 }
mcrMgtLedEntry OBJECT-TYPE
SYNTAX McrMgtLedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of the table, each relating to a separate MCR-MGT type
management module."
INDEX { mcrChassisIndex, mcrMgtLedSlotIndex }
::= { mcrMgtLedTable 1 }
McrMgtLedEntry ::=
SEQUENCE {
mcrMgtLedSlotIndex SlotNumber,
mcrMgtLedPWR INTEGER,
mcrMgtLedALM INTEGER,
mcrMgtLedLKC INTEGER,
mcrMgtLedCopperSpeed INTEGER
}
mcrMgtLedSlotIndex OBJECT-TYPE
SYNTAX SlotNumber
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Slot number the MCR-MGT module is currently inserted"
::= { mcrMgtLedEntry 2 }
mcrMgtLedPWR OBJECT-TYPE
SYNTAX INTEGER {
off(0),
onGreen(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the status of the power (PWR) LED on the management module.
Possible status values are:
off(0) - No power to the module
onGreen(1) - Power being applied to module"
::= { mcrMgtLedEntry 3 }
mcrMgtLedALM OBJECT-TYPE
SYNTAX INTEGER {
offNoAlarms(0),
onRedAlarmsPresent(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the status of the alarm (ALM) LED on the management module.
Possible status values are:
offNoAlarms(0) - Normal operating condition
onRedAlarmsPresent(1) - System hardware or software alarms present"
::= { mcrMgtLedEntry 4 }
mcrMgtLedLKC OBJECT-TYPE
SYNTAX INTEGER {
offLinkDown(0),
onGreenLinkUp(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the status of the link copper (LKC) LED on the management module.
Possible status values are:
offLinkDown(0) - Copper link status is DOWN
onGreenLinkUp(1) - Copper link status is UP"
::= { mcrMgtLedEntry 5 }
mcrMgtLedCopperSpeed OBJECT-TYPE
SYNTAX INTEGER {
off10Mbps(0),
onYellow100Mbps(1),
onGreen1000Mbps(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the status of the link copper speed (100/1000)
LED on the management module."
::= { mcrMgtLedEntry 6 }
--
-- end of mcrMgtLedTable
--
--
-- mcrMgtEthStatsTable
--
mcrMgtEthStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF McrMgtEthStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of MCR-MGT management module Ethernet status and statistics
information."
::= { mcrMgt 4 }
mcrMgtEthStatsEntry OBJECT-TYPE
SYNTAX McrMgtEthStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the Ethernet statistics table, each relating to an Ethernet interface."
INDEX { mcrChassisIndex, mgtEthSlotIndex }
::= { mcrMgtEthStatsTable 1 }
McrMgtEthStatsEntry ::=
SEQUENCE {
mgtEthSlotIndex SlotNumber,
mgtEthStatsIfIndex GenericTableIndex,
mgtEthStatsName DisplayString,
mgtEthStatsMacAddress MacAddress,
mgtEthStatsStatus INTEGER,
mgtEthStatsSpeedDuplex INTEGER,
mgtEthStatsBroadcast YesNoValue,
mgtEthStatsDebug YesNoValue,
mgtEthStatsLoopback YesNoValue,
mgtEthStatsPointtoPoint YesNoValue,
mgtEthStatsNoTrailers YesNoValue,
mgtEthStatsRunning YesNoValue,
mgtEthStatsNoArp YesNoValue,
mgtEthStatsPromiscuous YesNoValue,
mgtEthStatsRxMulticast YesNoValue,
mgtEthStatsMasterLoadBalancer YesNoValue,
mgtEthStatsSlaveLoadBalancer YesNoValue,
mgtEthStatsMulticast YesNoValue,
mgtEthStatsSetMedia YesNoValue,
mgtEthStatsAutoMedia YesNoValue,
mgtEthStatsDynamic YesNoValue,
mgtEthStatsLocalAddress IpAddress,
mgtEthStatsSubnetMask IpAddress,
mgtEthStatsBroadcastAddress IpAddress,
mgtEthStatsMtu Unsigned32,
mgtEthStatsTxQLen Unsigned32,
mgtEthStatsRxBytes Counter32,
mgtEthStatsTxBytes Counter32,
mgtEthStatsRxPackets Counter32,
mgtEthStatsTxPackets Counter32,
mgtEthStatsRxErrors Counter32,
mgtEthStatsTxPktErrors Counter32,
mgtEthStatsRxDroppedPkts Counter32,
mgtEthStatsTxDroppedPkts Counter32,
mgtEthStatsRxOverruns Counter32,
mgtEthStatsTxOverruns Counter32,
mgtEthStatsRxFrameErrs Counter32,
mgtEthStatsTxCarrierErrs Counter32,
mgtEthStatsCollisions Counter32
}
mgtEthSlotIndex OBJECT-TYPE
SYNTAX SlotNumber
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Slot number the MCR-MGT module is currently inserted."
::= { mcrMgtEthStatsEntry 2 }
mgtEthStatsIfIndex OBJECT-TYPE
SYNTAX GenericTableIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Ethernet interface number."
::= { mcrMgtEthStatsEntry 3 }
mgtEthStatsName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Displays Ethernet interface name."
::= { mcrMgtEthStatsEntry 4 }
mgtEthStatsMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Displays the MAC address."
::= { mcrMgtEthStatsEntry 5 }
mgtEthStatsStatus OBJECT-TYPE
SYNTAX INTEGER {
down(0),
up(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Displays the Ethernet link status - down(0) or up(1)."
::= { mcrMgtEthStatsEntry 6 }
mgtEthStatsSpeedDuplex OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
speed10Half(1),
speed10Full(2),
speed100Half(3),
speed100Full(4),
speed1000Half(5),
speed1000Full(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current status of the Ethernet connection speed/duplex twisted pair interface.
When the management module does not know the pair speed/duplex, this variable
has the value unknown(0). "
::= { mcrMgtEthStatsEntry 7 }
mgtEthStatsBroadcast OBJECT-TYPE
SYNTAX YesNoValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The management module's Ethernet Broadcast Flags status."
::= { mcrMgtEthStatsEntry 8 }
mgtEthStatsDebug OBJECT-TYPE
SYNTAX YesNoValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The management module's Ethernet Debug Flags status."
::= { mcrMgtEthStatsEntry 9 }
mgtEthStatsLoopback OBJECT-TYPE
SYNTAX YesNoValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The management module's Ethernet Loopback Flags status."
::= { mcrMgtEthStatsEntry 10 }
mgtEthStatsPointtoPoint OBJECT-TYPE
SYNTAX YesNoValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The management module's Ethernet Point to Point Flags status."
::= { mcrMgtEthStatsEntry 11 }
mgtEthStatsNoTrailers OBJECT-TYPE
SYNTAX YesNoValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The management module's Ethernet No Trailers Flags status."
::= { mcrMgtEthStatsEntry 12 }
mgtEthStatsRunning OBJECT-TYPE
SYNTAX YesNoValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The management module's Ethernet Running Flags status."
::= { mcrMgtEthStatsEntry 13 }
mgtEthStatsNoArp OBJECT-TYPE
SYNTAX YesNoValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The management module's Ethernet No Arp Protocol Flags status."
::= { mcrMgtEthStatsEntry 14 }
mgtEthStatsPromiscuous OBJECT-TYPE
SYNTAX YesNoValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The management module's Ethernet Promiscuous Flags status."
::= { mcrMgtEthStatsEntry 15 }
mgtEthStatsRxMulticast OBJECT-TYPE
SYNTAX YesNoValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The management module's Ethernet Receive all Multicast Flags status."
::= { mcrMgtEthStatsEntry 16}
mgtEthStatsMasterLoadBalancer OBJECT-TYPE
SYNTAX YesNoValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The management module's Ethernet Master Load Balancer Flags status."
::= { mcrMgtEthStatsEntry 17 }
mgtEthStatsSlaveLoadBalancer OBJECT-TYPE
SYNTAX YesNoValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The management module's Ethernet Slave Load Balancer Flags status."
::= { mcrMgtEthStatsEntry 18 }
mgtEthStatsMulticast OBJECT-TYPE
SYNTAX YesNoValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The management module's Ethernet Multicast Flags status."
::= { mcrMgtEthStatsEntry 19 }
mgtEthStatsSetMedia OBJECT-TYPE
SYNTAX YesNoValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The management module's Ethernet Set Media Flags status."
::= { mcrMgtEthStatsEntry 20 }
mgtEthStatsAutoMedia OBJECT-TYPE
SYNTAX YesNoValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The management module's Ethernet Auto Media Flags status."
::= { mcrMgtEthStatsEntry 21 }
mgtEthStatsDynamic OBJECT-TYPE
SYNTAX YesNoValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The management module's Ethernet Dynamic Flags status."
::= { mcrMgtEthStatsEntry 22 }
mgtEthStatsLocalAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The management module's Ethernet local IPv4 address."
::= { mcrMgtEthStatsEntry 23 }
mgtEthStatsSubnetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The management module's Ethernet IPv4 subnet mask."
::= { mcrMgtEthStatsEntry 24 }
mgtEthStatsBroadcastAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The management module's Ethernet Broadcast address."
::= { mcrMgtEthStatsEntry 25 }
mgtEthStatsMtu OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The management module's Ethernet MTU."
::= { mcrMgtEthStatsEntry 26 }
mgtEthStatsTxQLen OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The management module's Ethernet TX Queue Length."
::= { mcrMgtEthStatsEntry 27 }
mgtEthStatsRxBytes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The management module's Ethernet RX Bytes count."
::= { mcrMgtEthStatsEntry 28 }
mgtEthStatsTxBytes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The management module's Ethernet TX Bytes count."
::= { mcrMgtEthStatsEntry 29 }
mgtEthStatsRxPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The management module's Ethernet RX Packets count."
::= { mcrMgtEthStatsEntry 30 }
mgtEthStatsTxPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The management module's Ethernet TX Packets count."
::= { mcrMgtEthStatsEntry 31 }
mgtEthStatsRxErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The management module's Ethernet RX Packets Errors count."
::= { mcrMgtEthStatsEntry 32 }
mgtEthStatsTxPktErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The management module's Ethernet TX Packets Errors count."
::= { mcrMgtEthStatsEntry 33 }
mgtEthStatsRxDroppedPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The management module's Ethernet RX Dropped packets count."
::= { mcrMgtEthStatsEntry 34 }
mgtEthStatsTxDroppedPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The management module's Ethernet TX Dropped packets count."
::= { mcrMgtEthStatsEntry 35 }
mgtEthStatsRxOverruns OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The management module's Ethernet RX Overruns count"
::= { mcrMgtEthStatsEntry 36 }
mgtEthStatsTxOverruns OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The management module's Ethernet TX Overruns count."
::= { mcrMgtEthStatsEntry 37 }
mgtEthStatsRxFrameErrs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The management module's Ethernet RX Frame Errors count."
::= { mcrMgtEthStatsEntry 38 }
mgtEthStatsTxCarrierErrs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The management module's Ethernet TX Carrier Errors count"
::= { mcrMgtEthStatsEntry 39 }
mgtEthStatsCollisions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The management module's Ethernet Collisions count."
::= { mcrMgtEthStatsEntry 40 }
--
-- end of mcrMgtEthStatsTable
--
--
-- ************* end of mcrMgt - modules ***********
--
-- cm10gFixed - 10 Gb fixed media Converter type modules
--
cm10gFixed OBJECT IDENTIFIER ::= { mcrModuleTypes 8 }
--
-- cm10gFixedTable
--
cm10gFixedTable OBJECT-TYPE
SYNTAX SEQUENCE OF Cm10gFixedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of CM-10G type media converter module's status type information."
::= { cm10gFixed 1 }
cm10gFixedEntry OBJECT-TYPE
SYNTAX Cm10gFixedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of the table, each relating to a separate CM-10G type
media converter module."
INDEX { mcrChassisIndex, cm10gSlotIndex }
::= { cm10gFixedTable 1 }
Cm10gFixedEntry ::=
SEQUENCE {
cm10gSlotIndex SlotNumber,
cm10gModelname DisplayString,
cm10gModelDesc DisplayString,
cm10gHwJmp5ConfigMode INTEGER,
cm10gHwSw1OperationMode INTEGER,
cm10gHwSw2LinkMode INTEGER,
cm10gHwSw3FiberFaultAlert INTEGER,
cm10gHwSw4Port1EdcMode INTEGER,
cm10gHwSw5Port2EdcMode INTEGER,
cm10gPort1LinkStatus INTEGER,
cm10gPort1ConnType INTEGER,
cm10gPort1AutoNegState INTEGER,
cm10gPort1Speed INTEGER,
cm10gPort1Duplex INTEGER,
cm10gPort1PauseEnh INTEGER,
cm10gPort1ReceiveStatus INTEGER,
cm10gPort2LinkStatus INTEGER,
cm10gPort2ConnType INTEGER,
cm10gPort2AutoNegState INTEGER,
cm10gPort2Speed INTEGER,
cm10gPort2Duplex INTEGER,
cm10gPort2PauseEnh INTEGER,
cm10gPort2ReceiveStatus INTEGER,
cm10gPortLoopBack INTEGER,
cm10gPortTestMode INTEGER
}
cm10gSlotIndex OBJECT-TYPE
SYNTAX SlotNumber
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Slot number the CM-10G type module is currently inserted"
::= { cm10gFixedEntry 2 }
cm10gModelname OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the model of media converter module present in the
chassis"
::= { cm10gFixedEntry 3 }
cm10gModelDesc OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies a static description of the media converter module present
in the chassis"
::= { cm10gFixedEntry 4 }
cm10gHwJmp5ConfigMode OBJECT-TYPE
SYNTAX INTEGER {
hardwareSwitches(0),
auto(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the media converter module's ConfigMode, set by hardware
jumper J5 on the media converter module. When this object is set to
hardwareSwitches(0), the media converter module will disable configuration
control from the management module's software and all configuration
control comes from the media converter module's hardware switches or jumpers. "
::= { cm10gFixedEntry 5 }
cm10gHwSw1OperationMode OBJECT-TYPE
SYNTAX INTEGER{
test(0),
data(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current switch setting for operation mode.
Data mode is for normal data transmission."
::= { cm10gFixedEntry 6 }
cm10gHwSw2LinkMode OBJECT-TYPE
SYNTAX INTEGER {
swDownSmartLinkPassthrough(0),
swUpStandard(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current switch setting for Link Mode. If
the Operation switch is set to Test, then this object indicates
whether the port is in loopback or performing the build in link-test."
::= { cm10gFixedEntry 7 }
cm10gHwSw3FiberFaultAlert OBJECT-TYPE
SYNTAX INTEGER {
swDownDisabled(0),
swUpEnabled(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current switch setting for Fiber Fault
Alert. If the Operation switch is set to Test, then this object
indicates which port is in test mode"
::= { cm10gFixedEntry 8 }
cm10gHwSw4Port1EdcMode OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This oject indicates the current switch setting for EDC auto mode
for port 1. This object only applies to SFP moudles."
::= { cm10gFixedEntry 9 }
cm10gHwSw5Port2EdcMode OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This oject indicates the current switch setting for EDC auto mode
for port 2. This object only applies to SFP moudles."
::= { cm10gFixedEntry 10 }
cm10gPort1LinkStatus OBJECT-TYPE
SYNTAX INTEGER {
down(0),
up(1),
shutdown(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current fiber link status (port 1)."
::= { cm10gFixedEntry 11 }
cm10gPort1ConnType OBJECT-TYPE
SYNTAX INTEGER {
sc(0),
lc(1),
st(2),
sfp(3),
fc(5),
mtrj(6),
xfp(7),
sfpPlus(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's fiber port connector type (port 1)."
::= { cm10gFixedEntry 12 }
cm10gPort1AutoNegState OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
complete(1),
inProgress(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current fiber auto-negotiation state (port 1)."
::= { cm10gFixedEntry 13 }
cm10gPort1Speed OBJECT-TYPE
SYNTAX INTEGER {
speed10Mbps(0),
speed100Mbps(1),
speed1000Mbps(2),
speed10Gbps(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's fiber port speed in megabits per second (port 1)."
::= { cm10gFixedEntry 14 }
cm10gPort1Duplex OBJECT-TYPE
SYNTAX INTEGER {
half(0),
full(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If fiber auto-negotiation state is complete then this object
indicates the media converter module's current fiber auto-negotiated duplex
setting. If auto-negotiation is not complete then the value returned should be
ignored. (Port 1)"
::= { cm10gFixedEntry 15 }
cm10gPort1PauseEnh OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
symmetrical(1),
asymmetricalTx(2),
asymmetricalRx(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If fiber auto-negotiation state is complete then this object indicates
the media converter module's current fiber auto-negotiated pause setting. If
auto-negotiation is not complete then the value returned should be ignored.
(Port 1)"
::= { cm10gFixedEntry 16 }
cm10gPort1ReceiveStatus OBJECT-TYPE
SYNTAX INTEGER {
fault(0),
ok(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the status of whether light is being received
on the fiber port (port 1)"
::= { cm10gFixedEntry 17 }
cm10gPort2LinkStatus OBJECT-TYPE
SYNTAX INTEGER {
down(0),
up(1),
shutdown(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current fiber link status (port 2)."
::= { cm10gFixedEntry 18 }
cm10gPort2ConnType OBJECT-TYPE
SYNTAX INTEGER {
sc(0),
lc(1),
st(2),
sfp(3),
fc(5),
mtrj(6),
xfp(7),
sfpPlus(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's fiber port connector type (port 2)."
::= { cm10gFixedEntry 19 }
cm10gPort2AutoNegState OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
complete(1),
inProgress(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current fiber auto-negotiation state (port 2)."
::= { cm10gFixedEntry 20 }
cm10gPort2Speed OBJECT-TYPE
SYNTAX INTEGER {
speed10Mbps(0),
speed100Mbps(1),
speed1000Mbps(2),
speed10Gbps(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's fiber port speed in megabits per second (port 2)."
::= { cm10gFixedEntry 21 }
cm10gPort2Duplex OBJECT-TYPE
SYNTAX INTEGER {
half(0),
full(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If fiber auto-negotiation state is complete then this object
indicates the media converter module's current fiber auto-negotiated duplex
setting. If auto-negotiation is not complete then the value returned should be
ignored. (Port 2)"
::= { cm10gFixedEntry 22 }
cm10gPort2PauseEnh OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
symmetrical(1),
asymmetricalTx(2),
asymmetricalRx(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If fiber auto-negotiation state is complete then this object indicates
the media converter module's current fiber auto-negotiated pause setting. If
auto-negotiation is not complete then the value returned should be ignored.
(Port 2)"
::= { cm10gFixedEntry 23 }
cm10gPort2ReceiveStatus OBJECT-TYPE
SYNTAX INTEGER {
fault(0),
ok(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the status of whether light is being received
on the fiber port (port 2)"
::= { cm10gFixedEntry 24 }
cm10gPortLoopBack OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
port1(1),
port2(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Media converter module's current port loopback mode setting. Writing to this
object will change the current settings. This object is read-only if
the media converter module's ConfigMode jumper is set to hardwareSwitches(0)."
::= { cm10gFixedEntry 25 }
cm10gPortTestMode OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
port1(1),
port2(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current port test mode setting."
::= { cm10gFixedEntry 26 }
--
-- cm10gFixedTable
--
--
-- cm10gConfigTable
--
cm10gConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF Cm10gConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of CM-10G type media converter module's configuration type information."
::= { cm10gFixed 2 }
cm10gConfigEntry OBJECT-TYPE
SYNTAX Cm10gConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of the table, each relating to a separate CM-10G type
media converter module."
INDEX { mcrChassisIndex, cm10gConfigSlotIndex }
::= { cm10gConfigTable 1 }
Cm10gConfigEntry ::=
SEQUENCE {
cm10gConfigSlotIndex SlotNumber,
cm10gConfigStatus ContainerStatus,
cm10gConfigModuleName DisplayString,
cm10gConfigLinkMode INTEGER,
cm10gConfigFiberFaultAlert EnableDisableValue,
cm10gConfigFiberAutoNeg EnableDisableValue,
cm10gConfigPort1Name DisplayString,
cm10gConfigPort1Enable YesNoValue,
cm10gConfigPort1EdcMode INTEGER,
cm10gConfigPort1FecEnable YesNoValue,
cm10gConfigPort1FecAmplitude INTEGER,
cm10gConfigPort1FecPhase INTEGER,
cm10gConfigPort1WavelengthEnable YesNoValue,
cm10gConfigPort1WavelengthValue INTEGER,
cm10gConfigPort1ChannelEnable YesNoValue,
cm10gConfigPort1ChannelNumber INTEGER,
cm10gConfigPort1TxDitherEnable YesNoValue,
cm10gConfigPort1TxDitherValue EnableDisableValue,
cm10gConfigPort2Name DisplayString,
cm10gConfigPort2Enable YesNoValue,
cm10gConfigPort2EdcMode INTEGER,
cm10gConfigPort2FecEnable YesNoValue,
cm10gConfigPort2FecAmplitude INTEGER,
cm10gConfigPort2FecPhase INTEGER,
cm10gConfigPort2WavelengthEnable YesNoValue,
cm10gConfigPort2WavelengthValue INTEGER,
cm10gConfigPort2ChannelEnable YesNoValue,
cm10gConfigPort2ChannelNumber INTEGER,
cm10gConfigPort2TxDitherEnable YesNoValue,
cm10gConfigPort2TxDitherValue EnableDisableValue
}
cm10gConfigSlotIndex OBJECT-TYPE
SYNTAX SlotNumber
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Slot number the CM-10G type module is currently inserted"
::= { cm10gConfigEntry 2 }
cm10gConfigStatus OBJECT-TYPE
SYNTAX ContainerStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When you perform a GET on this variable, one of
the following values will be returned:
1-Indicates that the container folder is active with no changes.
2-Indicates that the container folder is active with change(s).
Once you have completed setting the variables in a folder, you
will want to submit your changes to the management module. To do
this, set the Status variable to 4. If you want to discard the
changes, set the Status variable to 6.
4-Indicates that the changes in the container folder are to be
submitted to the management module, verified and and saved to flash.
6-Indicates that the changes in the container folder are to be
discarded."
::= { cm10gConfigEntry 3 }
cm10gConfigModuleName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..63))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies a user configurable name for the media converter module
present in the chassis. "
::= { cm10gConfigEntry 4 }
cm10gConfigLinkMode OBJECT-TYPE
SYNTAX INTEGER {
standard(0),
smartLinkPassthrough(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the Link Mode for the media converter module. This object
is read-only if the media converter module's ConfigMode jumper is set to
hardwareSwitches(0)."
::= { cm10gConfigEntry 5 }
cm10gConfigFiberFaultAlert OBJECT-TYPE
SYNTAX EnableDisableValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the Fiber Fault Alert setting for the media
module. This object is read-only if the media converter module's ConfigMode
jumper is set to hardwareSwitches(0). "
::= { cm10gConfigEntry 6 }
cm10gConfigFiberAutoNeg OBJECT-TYPE
SYNTAX EnableDisableValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the wither fiber auto-negotiation is
enabled for both ports. This only applies if 1G SFP modules are in
use. This object is read-only if the media module's ConfigMode
jumper is set to hardwareSwitches(0)."
::= { cm10gConfigEntry 7 }
cm10gConfigPort1Name OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..8))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies a user definable name for port 1."
::= { cm10gConfigEntry 8 }
cm10gConfigPort1Enable OBJECT-TYPE
SYNTAX YesNoValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies whether port 1 is enabled."
::= { cm10gConfigEntry 9 }
cm10gConfigPort1EdcMode OBJECT-TYPE
SYNTAX INTEGER {
auto(0),
alternate(1),
linear(2),
limiting(3),
cx1(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the EDC mode for this port. This config
option only applies for an SFP module. This object is read-only if the
media converter module's ConfigMode jumper is set to
hardwareSwitches(0)."
::= { cm10gConfigEntry 10 }
cm10gConfigPort1FecEnable OBJECT-TYPE
SYNTAX YesNoValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the whether FEC control is enabled for this
port. This config option only applies for an XFP module. This
object is read-only if the media module's ConfigMode jumper is set
to hardwareSwitches(0)."
::= { cm10gConfigEntry 11 }
cm10gConfigPort1FecAmplitude OBJECT-TYPE
SYNTAX INTEGER(-128..127)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the FEC Amplitude value for this port. This
config option only applies for an XFP module. This object is
read-only if the media converter module's ConfigMode jumper is set to
hardwareSwitches(0)."
::= { cm10gConfigEntry 12 }
cm10gConfigPort1FecPhase OBJECT-TYPE
SYNTAX INTEGER(-128..127)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the FEC phase value for this port. This
config option only applies for an XFP module. This object is
read-only if the media converter module's ConfigMode jumper is set to
hardwareSwitches(0)."
::= { cm10gConfigEntry 13 }
cm10gConfigPort1WavelengthEnable OBJECT-TYPE
SYNTAX YesNoValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies whether Wavelength fine tuning is enabled for
this port. This object is read-only if the media module's ConfigMode
jumper is set to hardwareSwitches(0)."
::= { cm10gConfigEntry 14 }
cm10gConfigPort1WavelengthValue OBJECT-TYPE
SYNTAX INTEGER(0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies Wavelength fine tuning value for this port.
This object is read-only if the media converter module's ConfigMode
jumper is set to hardwareSwitches(0)."
::= { cm10gConfigEntry 15 }
cm10gConfigPort1ChannelEnable OBJECT-TYPE
SYNTAX YesNoValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies whether channel number fine tuning is enabled
for this port. This config option only applies for an XFP module.
This object is read-only if the media module's ConfigMode jumper is
set to hardwareSwitches(0)."
::= { cm10gConfigEntry 16 }
cm10gConfigPort1ChannelNumber OBJECT-TYPE
SYNTAX INTEGER(1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the channel number fine tuning value for this
port. This object is read-only if the media converter module's
ConfigMode jumper is set to hardwareSwitches(0)."
::= { cm10gConfigEntry 17 }
cm10gConfigPort1TxDitherEnable OBJECT-TYPE
SYNTAX YesNoValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the whether TX Dither control is enabled on
this port. If not enabled the default TX Dither value will be used.
This object is read-only if the media module's ConfigMode jumper is
set to hardwareSwitches(0)."
::= { cm10gConfigEntry 18 }
cm10gConfigPort1TxDitherValue OBJECT-TYPE
SYNTAX EnableDisableValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the whether TX Dither is enabled for this
port. This object is read-only if the media module's ConfigMode
jumper is set to hardwareSwitches(0)."
::= { cm10gConfigEntry 19 }
cm10gConfigPort2Name OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..8))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies a user definable name for port 2."
::= { cm10gConfigEntry 20 }
cm10gConfigPort2Enable OBJECT-TYPE
SYNTAX YesNoValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies whether port 2 is enabled."
::= { cm10gConfigEntry 21 }
cm10gConfigPort2EdcMode OBJECT-TYPE
SYNTAX INTEGER {
auto(0),
alternate(1),
linear(2),
limiting(3),
cx1(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the EDC mode for this port. This config
option only applies for an SFP module. This object is read-only if the
media converter module's ConfigMode jumper is set to
hardwareSwitches(0)."
::= { cm10gConfigEntry 22 }
cm10gConfigPort2FecEnable OBJECT-TYPE
SYNTAX YesNoValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the whether FEC control is enabled for this
port. This config option only applies for an XFP module. This
object is read-only if the media module's ConfigMode jumper is set
to hardwareSwitches(0)."
::= { cm10gConfigEntry 23 }
cm10gConfigPort2FecAmplitude OBJECT-TYPE
SYNTAX INTEGER(-128..127)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the FEC Amplitude value for this port. This
config option only applies for an XFP module. This object is
read-only if the media converter module's ConfigMode jumper is set to
hardwareSwitches(0)."
::= { cm10gConfigEntry 24 }
cm10gConfigPort2FecPhase OBJECT-TYPE
SYNTAX INTEGER(-128..127)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the FEC phase value for this port. This
config option only applies for an XFP module. This object is
read-only if the media converter module's ConfigMode jumper is set to
hardwareSwitches(0)."
::= { cm10gConfigEntry 25 }
cm10gConfigPort2WavelengthEnable OBJECT-TYPE
SYNTAX YesNoValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies whether Wavelength fine tuning is enabled for
this port. This object is read-only if the media module's ConfigMode
jumper is set to hardwareSwitches(0)."
::= { cm10gConfigEntry 26 }
cm10gConfigPort2WavelengthValue OBJECT-TYPE
SYNTAX INTEGER(0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies Wavelength fine tuning value for this port.
This object is read-only if the media converter module's ConfigMode
jumper is set to hardwareSwitches(0)."
::= { cm10gConfigEntry 27 }
cm10gConfigPort2ChannelEnable OBJECT-TYPE
SYNTAX YesNoValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies whether channel number fine tuning is enabled
for this port. This object is read-only if the media module's
ConfigMode jumper is set to hardwareSwitches(0)."
::= { cm10gConfigEntry 28 }
cm10gConfigPort2ChannelNumber OBJECT-TYPE
SYNTAX INTEGER(1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the channel number fine tuning value for this
port. This object is read-only if the media converter module's
ConfigMode jumper is set to hardwareSwitches(0)."
::= { cm10gConfigEntry 29 }
cm10gConfigPort2TxDitherEnable OBJECT-TYPE
SYNTAX YesNoValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the whether TX Dither control is enabled on
this port. If not enabled the default TX Dither value will be used.
This object is read-only if the media module's ConfigMode jumper is
set to hardwareSwitches(0)."
::= { cm10gConfigEntry 30 }
cm10gConfigPort2TxDitherValue OBJECT-TYPE
SYNTAX EnableDisableValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the whether TX Dither is enabled for this
port. This object is read-only if the media module's ConfigMode
jumper is set to hardwareSwitches(0)."
::= { cm10gConfigEntry 31 }
--
-- cm10gConfigTable
--
--
-- cm10gLedTable
--
cm10gLedTable OBJECT-TYPE
SYNTAX SEQUENCE OF Cm10gLedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of CM-10G type media converter module's LED status information."
::= { cm10gFixed 3 }
cm10gLedEntry OBJECT-TYPE
SYNTAX Cm10gLedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of the table, each relating to a separate CM-10G type
media converter module."
INDEX { mcrChassisIndex, cm10gLedsSlotIndex }
::= { cm10gLedTable 1 }
Cm10gLedEntry ::=
SEQUENCE {
cm10gLedsSlotIndex SlotNumber,
cm10gLedPWR INTEGER,
cm10gLedLK1 INTEGER,
cm10gLedLK2 INTEGER
}
cm10gLedsSlotIndex OBJECT-TYPE
SYNTAX SlotNumber
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Slot number the CM-10G type module is currently inserted"
::= { cm10gLedEntry 2 }
cm10gLedPWR OBJECT-TYPE
SYNTAX INTEGER {
off(0),
onGreen(1),
blinking(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the status of the power (PWR) LED on the media converter module.
Possible status values are:
off(0) - No power to the module
onGreen(1) - Power being applied to module
blinking(2) - Loopback or Link-Test enabled"
::= { cm10gLedEntry 3 }
cm10gLedLK1 OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the status of the port 1 link (LK1) LED on the
media converter module.
Possible status values are:
off(0) - No link
on(1) - Port link present"
::= { cm10gLedEntry 4 }
cm10gLedLK2 OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the status of the port 2 link (LK2) LED on the
media converter module.
Possible status values are:
off(0) - No link
on(1) - Port link present"
::= { cm10gLedEntry 5 }
--
-- end of cm10gLedTable
--
--
-- end of cm10gFixed
-- exCM - 10/100/100 Mb Rate Converting media Converter type modules
--
exCM OBJECT IDENTIFIER ::= { mcrModuleTypes 9 }
--
-- exCMTable
--
exCMTable OBJECT-TYPE
SYNTAX SEQUENCE OF ExCMEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of CM-1110 type media converter module's configuration and status type
information."
::= { exCM 1 }
exCMEntry OBJECT-TYPE
SYNTAX ExCMEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of the table, each relating to a separate CM-1110 type
media converter module."
INDEX { mcrChassisIndex, exCMSlotIndex}
::= { exCMTable 1 }
ExCMEntry ::=
SEQUENCE {
exCMSlotIndex SlotNumber,
exCMModelName DisplayString,
exCMModelDesc DisplayString,
exCMHwJmp5ConfigMode INTEGER,
exCMHwSw1AutoLocalRemote INTEGER,
exCMHwSw2Rate INTEGER,
exCMHwSw3SymmetricAsymmetric INTEGER,
exCMHwSw4SnrRatio INTEGER,
exCMHwSw5Loopback INTEGER,
exCMHwSw6EthAutoNeg INTEGER,
exCMHwSw7EthSpeed INTEGER,
exCMHwSw8EthDuplex INTEGER,
exCMHwSw9LinkMode INTEGER,
exCMHwSw10InterlinkFaultFeedback INTEGER,
exCMVdslLinkStatus INTEGER,
exCMVdslConnType INTEGER,
exCMVdslLoopBack EnableDisableValue,
exCMVdslRole INTEGER,
exCMVdslProfile INTEGER,
exCMVdslBitswapping INTEGER,
exCMVdslStatusAttainableDataRateUp Integer32,
exCMVdslStatusAttainableDataRateDown Integer32,
exCMVdslStatusActualDataRateUp Integer32,
exCMVdslStatusActualDataRateDown Integer32,
exCMVdslStatusPrevDataRateUp Integer32,
exCMVdslStatusPrevDataRateDown Integer32,
exCMVdslStatusActualSnrUp Integer32,
exCMVdslStatusActualSnrDown Integer32,
exCMVdslStatusActualSnrUs0 Integer32,
exCMVdslStatusActualSnrUs1 Integer32,
exCMVdslStatusActualSnrDs1 Integer32,
exCMVdslStatusActualSnrUs2 Integer32,
exCMVdslStatusActualSnrDs2 Integer32,
exCMVdslStatusActualSnrUs3 Integer32,
exCMVdslStatusActualSnrDs3 Integer32,
exCMVdslStatusActualSnrUs4 Integer32,
exCMVdslStatusActualSnrDs4 Integer32,
exCMVdslStatusActualSignalAttenuationUp Integer32,
exCMVdslStatusActualSignalAttenuationDown Integer32,
exCMVdslStatusActualSignalAttenuationUs0 Integer32,
exCMVdslStatusActualSignalAttenuationUs1 Integer32,
exCMVdslStatusActualSignalAttenuationDs1 Integer32,
exCMVdslStatusActualSignalAttenuationUs2 Integer32,
exCMVdslStatusActualSignalAttenuationDs2 Integer32,
exCMVdslStatusActualSignalAttenuationUs3 Integer32,
exCMVdslStatusActualSignalAttenuationDs3 Integer32,
exCMVdslStatusActualSignalAttenuationUs4 Integer32,
exCMVdslStatusActualSignalAttenuationDs4 Integer32,
exCMVdslStatusActualLineAttenuationUp Integer32,
exCMVdslStatusActualLineAttenuationDown Integer32,
exCMVdslStatusActualLineAttenuationUs0 Integer32,
exCMVdslStatusActualLineAttenuationUs1 Integer32,
exCMVdslStatusActualLineAttenuationDs1 Integer32,
exCMVdslStatusActualLineAttenuationUs2 Integer32,
exCMVdslStatusActualLineAttenuationDs2 Integer32,
exCMVdslStatusActualLineAttenuationUs3 Integer32,
exCMVdslStatusActualLineAttenuationDs3 Integer32,
exCMVdslStatusActualLineAttenuationUs4 Integer32,
exCMVdslStatusActualLineAttenuationDs4 Integer32,
exCMVdslStatusActualInterleaveDelayUp Integer32,
exCMVdslStatusActualInterleaveDelayDown Integer32,
exCMVdslStatusActualInpUp Integer32,
exCMVdslStatusActualInpDown Integer32,
exCMVdslStatusActualInterleavingDepthUp Integer32,
exCMVdslStatusActualInterleavingDepthDown Integer32,
exCMVdslStatusActualInterleavingBlockUp Integer32,
exCMVdslStatusActualInterleavingBlockDown Integer32,
exCMVdslStatusActualTransmitPowerUp Integer32,
exCMVdslStatusActualTransmitPowerDown Integer32,
exCMVdslStatusMaxDataRateUp Integer32,
exCMVdslStatusMaxDataRateDown Integer32,
exCMVdslStatusMinDataRateUp Integer32,
exCMVdslStatusMinDataRateDown Integer32,
exCMVdslStatusTargetSnrUp Integer32,
exCMVdslStatusTargetSnrDown Integer32,
exCMVdslStatusMaxInterleaveDelayUp Integer32,
exCMVdslStatusMaxInterleaveDelayDown Integer32,
exCMVdslStatusMinInpUp Integer32,
exCMVdslStatusMinInpDown Integer32,
exCMVdslRemoteLoopback INTEGER,
exCMVdslRemoteReset INTEGER,
exCMEthernetLinkStatus INTEGER,
exCMEthernetConnType INTEGER,
exCMEthernetAutoNegState INTEGER,
exCMEthernetSpeed INTEGER,
exCMEthernetDuplex INTEGER,
exCMEthernetCrossOver INTEGER,
exCMEthernetPauseEnh INTEGER,
exCMEthernetLPRFStatus INTEGER,
exCMEthernetAutoSpeedDownshift INTEGER,
exCMEthernetMDI INTEGER,
exCMVdslFirmwareVersion DisplayString,
exCMVdslFirmwareDate DateAndTime,
exCMVdslFirmwareDateString DisplayString
}
exCMSlotIndex OBJECT-TYPE
SYNTAX SlotNumber
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Slot number the CM-1110 type module is currently inserted"
::= { exCMEntry 2 }
exCMModelName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the model of media converter module present in the
chassis"
::= { exCMEntry 3 }
exCMModelDesc OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies a static description of the media converter module present
in the chassis"
::= { exCMEntry 4 }
exCMHwJmp5ConfigMode OBJECT-TYPE
SYNTAX INTEGER {
hardwareSwitches(0),
auto(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the media converter module's ConfigMode, set by hardware
switch on the media converter module. When this object is set to hardwareSwitches(0), the
media converter module will disable configuration control from the management
module's software and all configuration control comes from the media
module's hardware switches or jumpers. "
::= { exCMEntry 5 }
exCMHwSw1AutoLocalRemote OBJECT-TYPE
SYNTAX INTEGER {
swDownRemote(0),
swUpAutoLocal(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current switch setting for VDSL role."
::= { exCMEntry 6 }
exCMHwSw2Rate OBJECT-TYPE
SYNTAX INTEGER {
swDownLongRange(0),
swUpHighSpeed(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current switch setting for VDSL rate/reach."
::= { exCMEntry 7 }
exCMHwSw3SymmetricAsymmetric OBJECT-TYPE
SYNTAX INTEGER {
swDownDisabled(0),
swUpEnabled(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current switch setting for VDSL band plan."
::= { exCMEntry 8 }
exCMHwSw4SnrRatio OBJECT-TYPE
SYNTAX INTEGER {
swDown6db(0),
swUp9db(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current switch setting for VDSL signal-to-noise ratio."
::= { exCMEntry 9 }
exCMHwSw5Loopback OBJECT-TYPE
SYNTAX INTEGER {
swDownDisabled(0),
swUpEnabled(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current switch setting for VDSL loopback."
::= { exCMEntry 10 }
exCMHwSw6EthAutoNeg OBJECT-TYPE
SYNTAX INTEGER {
swDownDisabled(0),
swUpEnabled(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current switch setting for ethernet auto-negotiation."
::= { exCMEntry 11 }
exCMHwSw7EthSpeed OBJECT-TYPE
SYNTAX INTEGER {
swDown10Mbps(0),
swUp100Mbps(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current switch setting for ethernet speed (when auto-negotiation is disabled)."
::= { exCMEntry 12 }
exCMHwSw8EthDuplex OBJECT-TYPE
SYNTAX INTEGER {
swDownHalf(0),
swUpFull(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current switch setting for ethernet duplex (when auto-negotiation is disabled)."
::= { exCMEntry 13 }
exCMHwSw9LinkMode OBJECT-TYPE
SYNTAX INTEGER {
swDownLinkPassthrough(0),
swUpStandard(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current switch setting for link mode."
::= { exCMEntry 14 }
exCMHwSw10InterlinkFaultFeedback OBJECT-TYPE
SYNTAX INTEGER {
swDownEnabled(0),
swUpDisabled(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current switch setting for interlink fault feedback."
::= { exCMEntry 15 }
exCMVdslLinkStatus OBJECT-TYPE
SYNTAX INTEGER {
idle(0),
handshake(1),
training(2),
up(3),
upLogicallyDown(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current VDSL link status."
::= { exCMEntry 16 }
exCMVdslConnType OBJECT-TYPE
SYNTAX INTEGER {
rj45(9),
terminalBlock(10),
bnc(11)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's VDSL port connector type."
::= { exCMEntry 17 }
exCMVdslLoopBack OBJECT-TYPE
SYNTAX EnableDisableValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
This object is read-only if the media converter module's ConfigMode jumper is
set to hardwareSwitches(0)."
::= { exCMEntry 18 }
exCMVdslRole OBJECT-TYPE
SYNTAX INTEGER {
local(0),
remote(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the VDSL port's current role."
::= { exCMEntry 19 }
exCMVdslProfile OBJECT-TYPE
SYNTAX INTEGER {
notApplicable(0),
profile1-AnnexA-R-POTS-D-32-EU-32-30a(1),
profile2-AnnexA-R-POTS-D-32-EU-32-17a(2),
profile3-AnnexA-R-POTS-D-32-EU-32-12b(3),
profile4-AnnexA-R-POTS-D-32-EU-32-12a(4),
profile5-AnnexA-R-POTS-D-32-EU-32-8a(5),
profile6-AnnexA-R-POTS-D-32-EU-32-8b(6),
profile7-AnnexA-R-POTS-D-32-EU-32-8c(7),
profile8-AnnexA-R-POTS-D-32-EU-32-8d(8),
profile9-AnnexA-R-POTS-D-64-EU-64-30a-NUS0(9),
profile10-AnnexA-R-POTS-D-64-EU-64-17a(10),
profile11-AnnexB-B7-3-997-M1x-M(11),
profile12-AnnexB-B7-4-997-M2x-M-8(12),
profile13-AnnexB-B7-5-997-M2x-A(13),
profile14-AnnexB-B7-6-997-M2x-M(14),
profile15-AnnexB-B7-9-997E17-M2x-A(15),
profile16-AnnexB-B7-10-997E30-M2x-NUS0(16),
profile17-AnnexB-B8-1-998-M1x-A(17),
profile18-AnnexB-B8-2-998-M1x-B(18),
profile19-AnnexB-B8-4-998-M2x-A(19),
profile20-AnnexB-B8-5-998-M2x-M(20),
profile21-AnnexB-B8-6-998-M2x-B(21),
profile22-AnnexB-B8-8-998E17-M2x-NUS0(22),
profile23-AnnexB-B8-9-998E17-M2x-NUS0-M(23),
profile24-AnnexB-B8-10-998ADE17-M2x-NUS0-M(24),
profile25-AnnexB-B8-11-998E17-M2x-A(25),
profile26-AnnexB-B8-12-998E17-M2x-B(26),
profile27-AnnexB-B8-13-998E30-M2x-NUS0(27),
profile28-AnnexB-B8-14-998E30-M2x-NUS0-M(28),
profile29-AnnexB-B8-15-998ADE30-M2x-NUS0-M(29),
profile30-AnnexB-B8-16-998ADE30-M2x-NUS0-A(30),
profile31-AnnexC-POTS-25-138-b(31),
profile32-AnnexC-POTS-25-276-b(32),
profile33-AnnexC-TMC-ISDN(33)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the VDSL port's current profile. This value has no meaning
when the VDSL role is remote."
::= { exCMEntry 20 }
exCMVdslBitswapping OBJECT-TYPE
SYNTAX INTEGER {
notApplicable(-1),
off(0),
on(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the VDSL port's current bitswapping status. This value has no meaning
when the VDSL role is remote."
::= { exCMEntry 21 }
exCMVdslStatusAttainableDataRateUp OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the VDSL port's attainable data rate (upstream) in kbps."
::= { exCMEntry 22 }
exCMVdslStatusAttainableDataRateDown OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the VDSL port's attainable data rate (downstream) in kbps."
::= { exCMEntry 23 }
exCMVdslStatusActualDataRateUp OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the VDSL port's actual data rate (upstream) in kbps."
::= { exCMEntry 24 }
exCMVdslStatusActualDataRateDown OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the VDSL port's actual data rate (downstream) in kbps."
::= { exCMEntry 25 }
exCMVdslStatusPrevDataRateUp OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the VDSL port's previous data rate (upstream) in kbps."
::= { exCMEntry 26 }
exCMVdslStatusPrevDataRateDown OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the VDSL port's previous data rate (downstream) in kbps."
::= { exCMEntry 27 }
exCMVdslStatusActualSnrUp OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the VDSL port's actual signal-to-noise ratio (upstream) in 0.1 dB."
::= { exCMEntry 28 }
exCMVdslStatusActualSnrDown OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the VDSL port's actual signal-to-noise ratio (downstream) in 0.1 dB."
::= { exCMEntry 29 }
exCMVdslStatusActualSnrUs0 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the VDSL port's actual signal-to-noise ratio (upstream 0) in 0.1 dB."
::= { exCMEntry 30 }
exCMVdslStatusActualSnrUs1 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the VDSL port's actual signal-to-noise ratio (upstream 1) in 0.1 dB."
::= { exCMEntry 31 }
exCMVdslStatusActualSnrDs1 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the VDSL port's actual signal-to-noise ratio (downstream 1) in 0.1 dB."
::= { exCMEntry 32 }
exCMVdslStatusActualSnrUs2 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the VDSL port's actual signal-to-noise ratio (upstream 2) in 0.2 dB."
::= { exCMEntry 33 }
exCMVdslStatusActualSnrDs2 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the VDSL port's actual signal-to-noise ratio (downstream 2) in 0.2 dB."
::= { exCMEntry 34 }
exCMVdslStatusActualSnrUs3 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the VDSL port's actual signal-to-noise ratio (upstream 3) in 0.3 dB."
::= { exCMEntry 35 }
exCMVdslStatusActualSnrDs3 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the VDSL port's actual signal-to-noise ratio (downstream 3) in 0.3 dB."
::= { exCMEntry 36 }
exCMVdslStatusActualSnrUs4 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the VDSL port's actual signal-to-noise ratio (upstream 4) in 0.4 dB."
::= { exCMEntry 37 }
exCMVdslStatusActualSnrDs4 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the VDSL port's actual signal-to-noise ratio (downstream 4) in 0.4 dB."
::= { exCMEntry 38 }
exCMVdslStatusActualSignalAttenuationUp OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the VDSL port's actual signal attenuation (upstream) in 0.1 dB."
::= { exCMEntry 39 }
exCMVdslStatusActualSignalAttenuationDown OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the VDSL port's actual signal attenuation (downstream) in 0.1 dB."
::= { exCMEntry 40 }
exCMVdslStatusActualSignalAttenuationUs0 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the VDSL port's actual signal attenuation (upstream 0) in 0.1 dB."
::= { exCMEntry 41 }
exCMVdslStatusActualSignalAttenuationUs1 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the VDSL port's actual signal attenuation (upstream 1) in 0.1 dB."
::= { exCMEntry 42 }
exCMVdslStatusActualSignalAttenuationDs1 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the VDSL port's actual signal attenuation (downstream 1) in 0.1 dB."
::= { exCMEntry 43 }
exCMVdslStatusActualSignalAttenuationUs2 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the VDSL port's actual signal attenuation (upstream 2) in 0.2 dB."
::= { exCMEntry 44 }
exCMVdslStatusActualSignalAttenuationDs2 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the VDSL port's actual signal attenuation (downstream 2) in 0.2 dB."
::= { exCMEntry 45 }
exCMVdslStatusActualSignalAttenuationUs3 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the VDSL port's actual signal attenuation (upstream 3) in 0.3 dB."
::= { exCMEntry 46 }
exCMVdslStatusActualSignalAttenuationDs3 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the VDSL port's actual signal attenuation (downstream 3) in 0.3 dB."
::= { exCMEntry 47 }
exCMVdslStatusActualSignalAttenuationUs4 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the VDSL port's actual signal attenuation (upstream 4) in 0.4 dB."
::= { exCMEntry 48 }
exCMVdslStatusActualSignalAttenuationDs4 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the VDSL port's actual signal attenuation (downstream 4) in 0.4 dB."
::= { exCMEntry 49 }
exCMVdslStatusActualLineAttenuationUp OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the VDSL port's actual line attenuation (upstream) in 0.1 dB."
::= { exCMEntry 50 }
exCMVdslStatusActualLineAttenuationDown OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the VDSL port's actual line attenuation (downstream) in 0.1 dB."
::= { exCMEntry 51 }
exCMVdslStatusActualLineAttenuationUs0 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the VDSL port's actual line attenuation (upstream 0) in 0.1 dB."
::= { exCMEntry 52 }
exCMVdslStatusActualLineAttenuationUs1 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the VDSL port's actual line attenuation (upstream 1) in 0.1 dB."
::= { exCMEntry 53 }
exCMVdslStatusActualLineAttenuationDs1 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the VDSL port's actual line attenuation (downstream 1) in 0.1 dB."
::= { exCMEntry 54 }
exCMVdslStatusActualLineAttenuationUs2 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the VDSL port's actual line attenuation (upstream 2) in 0.2 dB."
::= { exCMEntry 55 }
exCMVdslStatusActualLineAttenuationDs2 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the VDSL port's actual line attenuation (downstream 2) in 0.2 dB."
::= { exCMEntry 56 }
exCMVdslStatusActualLineAttenuationUs3 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the VDSL port's actual line attenuation (upstream 3) in 0.3 dB."
::= { exCMEntry 57 }
exCMVdslStatusActualLineAttenuationDs3 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the VDSL port's actual line attenuation (downstream 3) in 0.3 dB."
::= { exCMEntry 58 }
exCMVdslStatusActualLineAttenuationUs4 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the VDSL port's actual line attenuation (upstream 4) in 0.4 dB."
::= { exCMEntry 59 }
exCMVdslStatusActualLineAttenuationDs4 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the VDSL port's actual line attenuation (downstream 4) in 0.4 dB."
::= { exCMEntry 60 }
exCMVdslStatusActualInterleaveDelayUp OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the VDSL port's actual interleave delay (upstream) in ms."
::= { exCMEntry 61 }
exCMVdslStatusActualInterleaveDelayDown OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the VDSL port's actual interleave delay (downstream) in ms."
::= { exCMEntry 62 }
exCMVdslStatusActualInpUp OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the VDSL port's actual INP (impulse noise protection) (upstream)."
::= { exCMEntry 63 }
exCMVdslStatusActualInpDown OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the VDSL port's actual INP (impulse noise protection) (downstream) in ms."
::= { exCMEntry 64 }
exCMVdslStatusActualInterleavingDepthUp OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the VDSL port's actual interleaving depth (upstream)."
::= { exCMEntry 65 }
exCMVdslStatusActualInterleavingDepthDown OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the VDSL port's actual interleaving depth (impulse noise protection) (downstream) in ms."
::= { exCMEntry 66 }
exCMVdslStatusActualInterleavingBlockUp OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the VDSL port's actual interleaving block (upstream)."
::= { exCMEntry 67 }
exCMVdslStatusActualInterleavingBlockDown OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the VDSL port's actual interleaving block (impulse noise protection) (downstream) in ms."
::= { exCMEntry 68 }
exCMVdslStatusActualTransmitPowerUp OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the VDSL port's actual transmit power (upstream) in 0.1 dBm."
::= { exCMEntry 69 }
exCMVdslStatusActualTransmitPowerDown OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the VDSL port's actual transmit power (downstream) in 0.1 dBm."
::= { exCMEntry 70 }
exCMVdslStatusMaxDataRateUp OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the VDSL port's maximum data rate (upstream) in kbps."
::= { exCMEntry 71 }
exCMVdslStatusMaxDataRateDown OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the VDSL port's maximum data rate (downstream) in kbps."
::= { exCMEntry 72 }
exCMVdslStatusMinDataRateUp OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the VDSL port's minimum data rate (upstream) in kbps."
::= { exCMEntry 73 }
exCMVdslStatusMinDataRateDown OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the VDSL port's minimum data rate (downstream) in kbps."
::= { exCMEntry 74 }
exCMVdslStatusTargetSnrUp OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the VDSL port's target signal-to-noise ratio (upstream) in 0.1 dB."
::= { exCMEntry 75 }
exCMVdslStatusTargetSnrDown OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the VDSL port's target signal-to-noise ratio (downstream) in 0.1 dB."
::= { exCMEntry 76 }
exCMVdslStatusMaxInterleaveDelayUp OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the VDSL port's maximum interleave delay (upstream) in ms."
::= { exCMEntry 77 }
exCMVdslStatusMaxInterleaveDelayDown OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the VDSL port's maximum interleave delay (downstream) in ms."
::= { exCMEntry 78 }
exCMVdslStatusMinInpUp OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the VDSL port's minimum INP (impulse noise protection) (upstream)."
::= { exCMEntry 79 }
exCMVdslStatusMinInpDown OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the VDSL port's minimum INP (impulse noise protection) (downstream) in ms."
::= { exCMEntry 80 }
exCMVdslRemoteLoopback OBJECT-TYPE
SYNTAX INTEGER {
none(0),
remoteLoopbackOff(1),
remoteLoopbackOn(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Write remoteLoopbackOff(1) or remoteLoopbackOn(2) to this object to
set the loopback state of the remote VDSL peer. This object's value represents
the last loopback command sent to the peer."
::= { exCMEntry 81 }
exCMVdslRemoteReset OBJECT-TYPE
SYNTAX INTEGER {
notApplicable(0),
resetRemotePeer(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Write resetRemotePeer(1) to this object to reset the remote VDSL peer. This object's value has no meaning"
::= { exCMEntry 82 }
exCMEthernetLinkStatus OBJECT-TYPE
SYNTAX INTEGER {
down(0),
up(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current Ethernet link status."
::= { exCMEntry 83 }
exCMEthernetConnType OBJECT-TYPE
SYNTAX INTEGER {
rj45(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's Ethernet connector type."
::= { exCMEntry 84 }
exCMEthernetAutoNegState OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
complete(1),
inProgress(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current Ethernet auto-negotiation state."
::= { exCMEntry 85 }
exCMEthernetSpeed OBJECT-TYPE
SYNTAX INTEGER {
speed10Mbs(0),
speed100Mbps(1),
speed1000Mbps(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If Ethernet auto-negotiation state is complete then this object
indicates the media converter module's current Ethernet auto-negotiated speed
setting. If auto-negotiation is not complete then the value returned
should be ignored."
::= { exCMEntry 86 }
exCMEthernetDuplex OBJECT-TYPE
SYNTAX INTEGER {
half(0),
full(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If Ethernet auto-negotiation state is complete then this object
indicates the media converter module's current Ethernet auto-negotiated duplex
setting. If auto-negotiation is not complete then the value returned
should be ignored."
::= { exCMEntry 87 }
exCMEthernetCrossOver OBJECT-TYPE
SYNTAX INTEGER {
mdi(0),
mdix(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If Ethernet auto-negotiation state is complete then this object
indicates the media converter module's current Ethernet auto-negotiated MDI/MDI-X
setting. If auto-negotiation is not complete then the value returned
should be ignored."
::= { exCMEntry 88 }
exCMEthernetPauseEnh OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
symmetrical(1),
asymmetricalTx(2),
asymmetricalRx(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If Ethernet auto-negotiation state is complete then this object indicates
the media converter module's current Ethernet auto-negotiated pause setting. If
auto-negotiation is not complete then the value returned should be ignored."
::= { exCMEntry 89 }
exCMEthernetLPRFStatus OBJECT-TYPE
SYNTAX INTEGER {
ok(0),
remoteFault(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's Ethernet Link Partner Remote Fault status."
::= { exCMEntry 90 }
exCMEthernetAutoSpeedDownshift OBJECT-TYPE
SYNTAX INTEGER {
noDownshift(0),
downshift(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the status of the Ethernet auto speed downshift
feature. noDownshift indicates that an automatic downshift of the
Ethernet speed has not occurred."
::= { exCMEntry 91 }
exCMEthernetMDI OBJECT-TYPE
SYNTAX INTEGER {
mdi(0),
mdix(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the Ethernet port's crossover status: MDI or MDI-X."
::= { exCMEntry 92 }
exCMVdslFirmwareVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the version of the VDSL firmware."
::= { exCMEntry 93 }
exCMVdslFirmwareDate OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the date of the VDSL firmware"
::= { exCMEntry 94 }
exCMVdslFirmwareDateString OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the version of the VDSL firmware, in human-readable format."
::= { exCMEntry 95 }
--
-- /exCMTable
--
--
-- exCMConfigTable
--
exCMConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF ExCMConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of CM-1110 type media converter module's configuration type
information."
::= { exCM 2 }
exCMConfigEntry OBJECT-TYPE
SYNTAX ExCMConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of the table, each relating to a separate CM-1110 type
media converter module."
INDEX { mcrChassisIndex, exCMConfigSlotIndex}
::= { exCMConfigTable 1 }
ExCMConfigEntry ::=
SEQUENCE {
exCMConfigSlotIndex SlotNumber,
exCMConfigStatus ContainerStatus,
exCMConfigModuleName DisplayString,
exCMConfigLinkMode INTEGER,
exCMConfigInterlinkFaultFeedback EnableDisableValue,
exCMConfigVdslPortName DisplayString,
exCMConfigVdslPortEnable YesNoValue,
exCMConfigVdslProfileMode INTEGER,
exCMConfigVdslRole INTEGER,
exCMConfigVdslRate INTEGER,
exCMConfigVdslSymmetry INTEGER,
exCMConfigVdslProfile INTEGER,
exCMConfigVdslOverrideProfile EnableDisableValue,
exCMConfigVdslSignalToNoiseRatioUp Integer32,
exCMConfigVdslMinDataRateUp Integer32,
exCMConfigVdslMaxDataRateUp Integer32,
exCMConfigVdslMaxInterleaveDelayUp Integer32,
exCMConfigVdslMinInpUp Integer32,
exCMConfigVdslSignalToNoiseRatioDown Integer32,
exCMConfigVdslMinDataRateDown Integer32,
exCMConfigVdslMaxDataRateDown Integer32,
exCMConfigVdslMaxInterleaveDelayDown Integer32,
exCMConfigVdslMinInpDown Integer32,
exCMConfigVdslBitswapping EnableDisableValue,
exCMConfigVdslLowBandwidthAlarmUp Integer32,
exCMConfigVdslLowBandwidthAlarmDown Integer32,
exCMConfigEthernetPortName DisplayString,
exCMConfigEthernetPortEnable YesNoValue,
exCMConfigEthernetAutoNegotiation EnableDisableValue,
exCMConfigEthernetAutoNegAdv10HDX YesNoValue,
exCMConfigEthernetAutoNegAdv10FDX YesNoValue,
exCMConfigEthernetAutoNegAdv100HDX YesNoValue,
exCMConfigEthernetAutoNegAdv100FDX YesNoValue,
exCMConfigEthernetAutoNegAdv1000FDX YesNoValue,
exCMConfigEthernetSpeed INTEGER,
exCMConfigEthernetDuplex INTEGER,
exCMConfigEthernetCrossOver INTEGER,
exCMConfigEthernetPauseEnh INTEGER,
exCMConfigEthernetAutoSpeedDownshift INTEGER,
exCMConfigEthernet10BaseTDistance INTEGER,
exCMConfigUnidirectionalEthernet INTEGER,
exCMConfigPriorityToEgressQueueMap0 INTEGER,
exCMConfigPriorityToEgressQueueMap1 INTEGER,
exCMConfigPriorityToEgressQueueMap2 INTEGER,
exCMConfigPriorityToEgressQueueMap3 INTEGER,
exCMConfigPriorityToEgressQueueMap4 INTEGER,
exCMConfigPriorityToEgressQueueMap5 INTEGER,
exCMConfigPriorityToEgressQueueMap6 INTEGER,
exCMConfigPriorityToEgressQueueMap7 INTEGER,
exCMConfigEthernet8021pPriority OnOffValue,
exCMConfigEthernetIpTosPriority OnOffValue,
exCMConfigEthernetPriorityPrecedence INTEGER,
exCMConfigEthernetCongestionPolicy INTEGER,
exCMConfigEthernetPriorityMap0 INTEGER,
exCMConfigEthernetPriorityMap1 INTEGER,
exCMConfigEthernetPriorityMap2 INTEGER,
exCMConfigEthernetPriorityMap3 INTEGER,
exCMConfigEthernetPriorityMap4 INTEGER,
exCMConfigEthernetPriorityMap5 INTEGER,
exCMConfigEthernetPriorityMap6 INTEGER,
exCMConfigEthernetPriorityMap7 INTEGER,
exCMConfigEthernetIngressLimit INTEGER,
exCMConfigEthernetEgressLimit INTEGER,
exCMConfigEthernetDiscardTaggedFrames OnOffValue,
exCMConfigEthernetDiscardUntaggedFrames OnOffValue,
exCMConfigEthernetDefaultVlanId INTEGER,
exCMConfigEthernetDefaultPriority INTEGER,
exCMConfigEthernetVlanTaggingAction INTEGER,
exCMConfigEthernetFilterUnknownMulticast OnOffValue,
exCMConfigEthernetFilterUnknownUnicast OnOffValue,
exCMConfigVdsl8021pPriority OnOffValue,
exCMConfigVdslIpTosPriority OnOffValue,
exCMConfigVdslPriorityPrecedence INTEGER,
exCMConfigVdslCongestionPolicy INTEGER,
exCMConfigVdslPriorityMap0 INTEGER,
exCMConfigVdslPriorityMap1 INTEGER,
exCMConfigVdslPriorityMap2 INTEGER,
exCMConfigVdslPriorityMap3 INTEGER,
exCMConfigVdslPriorityMap4 INTEGER,
exCMConfigVdslPriorityMap5 INTEGER,
exCMConfigVdslPriorityMap6 INTEGER,
exCMConfigVdslPriorityMap7 INTEGER,
exCMConfigVdslIngressLimit INTEGER,
exCMConfigVdslEgressLimit INTEGER,
exCMConfigVdslDiscardTaggedFrames OnOffValue,
exCMConfigVdslDiscardUntaggedFrames OnOffValue,
exCMConfigVdslDefaultVlanId INTEGER,
exCMConfigVdslDefaultPriority INTEGER,
exCMConfigVdslVlanTaggingAction INTEGER,
exCMConfigVdslFilterUnknownMulticast OnOffValue,
exCMConfigVdslFilterUnknownUnicast OnOffValue,
exCMConfigVdslFastMode EnableDisableValue
}
exCMConfigSlotIndex OBJECT-TYPE
SYNTAX SlotNumber
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Slot number the ex-CM type module is currently inserted"
::= { exCMConfigEntry 2 }
exCMConfigStatus OBJECT-TYPE
SYNTAX ContainerStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When you perform a GET on this variable, one of
the following values will be returned:
1-Indicates that the container folder is active with no changes.
2-Indicates that the container folder is active with change(s).
Once you have completed setting the variables in a folder, you
will want to submit your changes to the management module. To do
this, set the Status variable to 4. If you want to discard the
changes, set the Status variable to 6.
4-Indicates that the changes in the container folder are to be
submitted to the management module, verified and and saved to flash.
6-Indicates that the changes in the container folder are to be
discarded."
::= { exCMConfigEntry 3 }
exCMConfigModuleName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..63))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies a user configurable name for the media converter module
present in the chassis. "
::= { exCMConfigEntry 4 }
exCMConfigLinkMode OBJECT-TYPE
SYNTAX INTEGER {
standard(0),
smartLinkPassthrough(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the Link Mode for the media converter module. This object
is read-only if the media converter module's ConfigMode jumper is set to
hardwareSwitches(0)."
::= { exCMConfigEntry 5 }
exCMConfigInterlinkFaultFeedback OBJECT-TYPE
SYNTAX EnableDisableValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the interlink fault feedback setting for the media
module.
This object is read-only if the media converter module's ConfigMode
jumper is set to hardwareSwitches(0). "
::= { exCMConfigEntry 6 }
exCMConfigVdslPortName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..8))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies a user definable name for the VDSL port."
::= { exCMConfigEntry 7 }
exCMConfigVdslPortEnable OBJECT-TYPE
SYNTAX YesNoValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies whether the VDSL port is enabled. "
::= { exCMConfigEntry 8 }
exCMConfigVdslProfileMode OBJECT-TYPE
SYNTAX INTEGER {
auto(0),
manual(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies how the VDSL profile is selected.
Auto: select through exCMConfigVdslRate and exCMConfigVdslSymmetry
Manual: select through exCMConfigVdslProfile."
::= { exCMConfigEntry 9 }
exCMConfigVdslRole OBJECT-TYPE
SYNTAX INTEGER {
auto(0),
local(1),
remote(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the VDSL role: auto, local (CO), or remote (CPE)."
::= { exCMConfigEntry 10 }
exCMConfigVdslRate OBJECT-TYPE
SYNTAX INTEGER {
highSpeed(0),
longRange(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the VDSL rate/reach."
::= { exCMConfigEntry 11 }
exCMConfigVdslSymmetry OBJECT-TYPE
SYNTAX INTEGER {
asymmetric(0),
symmetric(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the VDSL band plan or symmetry."
::= { exCMConfigEntry 12 }
exCMConfigVdslProfile OBJECT-TYPE
SYNTAX INTEGER {
profile1-AnnexA-R-POTS-D-32-EU-32-30a(1),
profile2-AnnexA-R-POTS-D-32-EU-32-17a(2),
profile3-AnnexA-R-POTS-D-32-EU-32-12b(3),
profile4-AnnexA-R-POTS-D-32-EU-32-12a(4),
profile5-AnnexA-R-POTS-D-32-EU-32-8a(5),
profile6-AnnexA-R-POTS-D-32-EU-32-8b(6),
profile7-AnnexA-R-POTS-D-32-EU-32-8c(7),
profile8-AnnexA-R-POTS-D-32-EU-32-8d(8),
profile9-AnnexA-R-POTS-D-64-EU-64-30a-NUS0(9),
profile10-AnnexA-R-POTS-D-64-EU-64-17a(10),
profile11-AnnexB-B7-3-997-M1x-M(11),
profile12-AnnexB-B7-4-997-M2x-M-8(12),
profile13-AnnexB-B7-5-997-M2x-A(13),
profile14-AnnexB-B7-6-997-M2x-M(14),
profile15-AnnexB-B7-9-997E17-M2x-A(15),
profile16-AnnexB-B7-10-997E30-M2x-NUS0(16),
profile17-AnnexB-B8-1-998-M1x-A(17),
profile18-AnnexB-B8-2-998-M1x-B(18),
profile19-AnnexB-B8-4-998-M2x-A(19),
profile20-AnnexB-B8-5-998-M2x-M(20),
profile21-AnnexB-B8-6-998-M2x-B(21),
profile22-AnnexB-B8-8-998E17-M2x-NUS0(22),
profile23-AnnexB-B8-9-998E17-M2x-NUS0-M(23),
profile24-AnnexB-B8-10-998ADE17-M2x-NUS0-M(24),
profile25-AnnexB-B8-11-998E17-M2x-A(25),
profile26-AnnexB-B8-12-998E17-M2x-B(26),
profile27-AnnexB-B8-13-998E30-M2x-NUS0(27),
profile28-AnnexB-B8-14-998E30-M2x-NUS0-M(28),
profile29-AnnexB-B8-15-998ADE30-M2x-NUS0-M(29),
profile30-AnnexB-B8-16-998ADE30-M2x-NUS0-A(30),
profile31-AnnexC-POTS-25-138-b(31),
profile32-AnnexC-POTS-25-276-b(32),
profile33-AnnexC-TMC-ISDN(33)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the VDSL profile."
::= { exCMConfigEntry 13 }
exCMConfigVdslOverrideProfile OBJECT-TYPE
SYNTAX EnableDisableValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether to override advanced VDSL profile
settings (e.g exCMConfigVdslSignalToNoiseRatioUp)."
::= { exCMConfigEntry 14 }
exCMConfigVdslSignalToNoiseRatioUp OBJECT-TYPE
SYNTAX Integer32(30..240)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the advanced VDSL profile setting
signal-to-noise ratio (upstream) in 0.1 dB."
::= { exCMConfigEntry 15 }
exCMConfigVdslMinDataRateUp OBJECT-TYPE
SYNTAX Integer32(128..101064)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the advanced VDSL profile setting
minimum data rate (upstream) in kbps."
::= { exCMConfigEntry 16 }
exCMConfigVdslMaxDataRateUp OBJECT-TYPE
SYNTAX Integer32(128..101064)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the advanced VDSL profile setting
maximum data rate (upstream) in kbps."
::= { exCMConfigEntry 17 }
exCMConfigVdslMaxInterleaveDelayUp OBJECT-TYPE
SYNTAX Integer32(0..16)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the advanced VDSL profile setting
maximum delay (upstream) in ms."
::= { exCMConfigEntry 18 }
exCMConfigVdslMinInpUp OBJECT-TYPE
SYNTAX Integer32(1..18)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the advanced VDSL profile setting
minimum INP (impulse noise protection) (upstream)."
::= { exCMConfigEntry 19 }
exCMConfigVdslSignalToNoiseRatioDown OBJECT-TYPE
SYNTAX Integer32(30..240)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the advanced VDSL profile setting
signal-to-noise ratio (downstream) in 0.1 dB."
::= { exCMConfigEntry 20 }
exCMConfigVdslMinDataRateDown OBJECT-TYPE
SYNTAX Integer32(128..101064)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the advanced VDSL profile setting
minimum data rate (downstream) in kbps."
::= { exCMConfigEntry 21 }
exCMConfigVdslMaxDataRateDown OBJECT-TYPE
SYNTAX Integer32(128..101064)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the advanced VDSL profile setting
maximum data rate (downstream) in kbps."
::= { exCMConfigEntry 22 }
exCMConfigVdslMaxInterleaveDelayDown OBJECT-TYPE
SYNTAX Integer32(0..16)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the advanced VDSL profile setting
maximum delay (downstream) in ms."
::= { exCMConfigEntry 23 }
exCMConfigVdslMinInpDown OBJECT-TYPE
SYNTAX Integer32(1..18)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the advanced VDSL profile setting
minimum INP (impulse noise protection) (downstream)."
::= { exCMConfigEntry 24 }
exCMConfigVdslBitswapping OBJECT-TYPE
SYNTAX EnableDisableValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the advanced VDSL profile
setting bitswapping."
::= { exCMConfigEntry 25 }
exCMConfigVdslLowBandwidthAlarmUp OBJECT-TYPE
SYNTAX Integer32(0..90000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the VDSL low bandwidth alarm threshold (upstream) in kbps."
::= { exCMConfigEntry 26 }
exCMConfigVdslLowBandwidthAlarmDown OBJECT-TYPE
SYNTAX Integer32(0..90000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the VDSL low bandwidth alarm threshold (downstream) in kbps."
::= { exCMConfigEntry 27 }
exCMConfigEthernetPortName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..8))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies a user definable name for the ethernet port. "
::= { exCMConfigEntry 28 }
exCMConfigEthernetPortEnable OBJECT-TYPE
SYNTAX YesNoValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies whether the VDSL port is enabled. "
::= { exCMConfigEntry 29 }
exCMConfigEthernetAutoNegotiation OBJECT-TYPE
SYNTAX EnableDisableValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the whether ethernet auto-negotiation is
enabled. This object is read-only if the media converter module's ConfigMode
jumper is set to hardwareSwitches(0)."
::= { exCMConfigEntry 30 }
exCMConfigEthernetAutoNegAdv10HDX OBJECT-TYPE
SYNTAX YesNoValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object controls whether or the ethernet port advertises willingness
to connect at 10Mbps, half duplex. This setting is ignored when
auto-negotiation is disabled."
::= { exCMConfigEntry 31 }
exCMConfigEthernetAutoNegAdv10FDX OBJECT-TYPE
SYNTAX YesNoValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object controls whether or the ethernet port advertises willingness
to connect at 10Mbps, full duplex. This setting is ignored when
auto-negotiation is disabled."
::= { exCMConfigEntry 32 }
exCMConfigEthernetAutoNegAdv100HDX OBJECT-TYPE
SYNTAX YesNoValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object controls whether or the ethernet port advertises willingness
to connect at 100Mbps, half duplex. This setting is ignored when
auto-negotiation is disabled."
::= { exCMConfigEntry 33 }
exCMConfigEthernetAutoNegAdv100FDX OBJECT-TYPE
SYNTAX YesNoValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object controls whether or the ethernet port advertises willingness
to connect at 100Mbps, full duplex. This setting is ignored when
auto-negotiation is disabled."
::= { exCMConfigEntry 34 }
exCMConfigEthernetAutoNegAdv1000FDX OBJECT-TYPE
SYNTAX YesNoValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object controls whether or the ethernet port advertises willingness
to connect at 1000Mbps, full duplex. This setting is ignored when
auto-negotiation is disabled."
::= { exCMConfigEntry 35 }
exCMConfigEthernetSpeed OBJECT-TYPE
SYNTAX INTEGER {
speed10Mbs(0),
speed100Mbps(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If ethernet auto-negotiation is disabled then this object identifies
the configured cooper speed. 1000 Mbps speed can only be auto
negotiated. If ethernet auto-negotiation is enabled then this object
is ignored. This object is read-only if the media converter module's ConfigMode
jumper is set to hardwareSwitches(0)."
::= { exCMConfigEntry 36 }
exCMConfigEthernetDuplex OBJECT-TYPE
SYNTAX INTEGER {
full(0),
half(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If ethernet auto-negotiation is disabled then this object identifies
the duplex setting for 10 & 100 Mbps for the ethernet port. Duplex for
1000 Mbps has to be auto negotiated. This object is read-only if the
media converter module's ConfigMode jumper is set to hardwareSwitches(0)."
::= { exCMConfigEntry 37 }
exCMConfigEthernetCrossOver OBJECT-TYPE
SYNTAX INTEGER {
auto(0),
mdi(1),
mdix(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the ethernet MDI/MDI-X setting.This object
is read-only if the media converter module's ConfigMode jumper is set to"
::= { exCMConfigEntry 38 }
exCMConfigEthernetPauseEnh OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
symmetrical(1),
asymmetricalTx(2),
symmAsymRx(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the ethernet pause (flow control) setting that
is a advertised. The settings can be disabled, advertise symmetrical,
advertise asymmetrical TX or advertise symmetrical and asymmetrical
RX. This object is read-only if the media converter module's ConfigMode jumper
is set to hardwareSwitches(0)."
::= { exCMConfigEntry 39 }
exCMConfigEthernetAutoSpeedDownshift OBJECT-TYPE
SYNTAX INTEGER(0..8)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the number of times the PHY attempts to
establish a Gigabit link before the PHY downshift to the next
highest speed. A value of 0 indicates the auto downshift is
disabled"
::= { exCMConfigEntry 40 }
exCMConfigEthernet10BaseTDistance OBJECT-TYPE
SYNTAX INTEGER {
normal(0),
extended(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When using cable exceeding 100 meters in 10BASE-T mode this feature
should be set to extended(1)."
::= { exCMConfigEntry 41 }
exCMConfigUnidirectionalEthernet OBJECT-TYPE
SYNTAX INTEGER {
notApplicable(-1),
disabled(0),
ethernetToVdsl(1),
vdslToEthernet(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Restrict the flow of Ethernet traffic to a single direction.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This feature may require a media converter module firmware upgrade)."
::= { exCMConfigEntry 42 }
exCMConfigPriorityToEgressQueueMap0 OBJECT-TYPE
SYNTAX INTEGER(0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the egress queue of frames tagged with 802.1p priority 0.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This feature may require a media converter module firmware upgrade)."
::= { exCMConfigEntry 43 }
exCMConfigPriorityToEgressQueueMap1 OBJECT-TYPE
SYNTAX INTEGER(0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the egress queue of frames tagged with 802.1p priority 1.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This feature may require a media converter module firmware upgrade)."
::= { exCMConfigEntry 44 }
exCMConfigPriorityToEgressQueueMap2 OBJECT-TYPE
SYNTAX INTEGER(0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the egress queue of frames tagged with 802.1p priority 2.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This feature may require a media converter module firmware upgrade)."
::= { exCMConfigEntry 45 }
exCMConfigPriorityToEgressQueueMap3 OBJECT-TYPE
SYNTAX INTEGER(0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the egress queue of frames tagged with 802.1p priority 3.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This feature may require a media converter module firmware upgrade)."
::= { exCMConfigEntry 46 }
exCMConfigPriorityToEgressQueueMap4 OBJECT-TYPE
SYNTAX INTEGER(0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the egress queue of frames tagged with 802.1p priority 4.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This feature may require a media converter module firmware upgrade)."
::= { exCMConfigEntry 47 }
exCMConfigPriorityToEgressQueueMap5 OBJECT-TYPE
SYNTAX INTEGER(0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the egress queue of frames tagged with 802.1p priority 5.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This feature may require a media converter module firmware upgrade)."
::= { exCMConfigEntry 48 }
exCMConfigPriorityToEgressQueueMap6 OBJECT-TYPE
SYNTAX INTEGER(0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the egress queue of frames tagged with 802.1p priority 6.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This feature may require a media converter module firmware upgrade)."
::= { exCMConfigEntry 49 }
exCMConfigPriorityToEgressQueueMap7 OBJECT-TYPE
SYNTAX INTEGER(0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the egress queue of frames tagged with 802.1p priority 7.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This feature may require a media converter module firmware upgrade)."
::= { exCMConfigEntry 50 }
exCMConfigEthernet8021pPriority OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Use 802.1p tag priority.
(This feature may require a media converter module firmware upgrade)."
::= { exCMConfigEntry 51 }
exCMConfigEthernetIpTosPriority OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Use IP TOS priority.
(This feature may require a media converter module firmware upgrade)."
::= { exCMConfigEntry 52 }
exCMConfigEthernetPriorityPrecedence OBJECT-TYPE
SYNTAX INTEGER {
notApplicable(-1),
priority8021p(0),
priorityIpTos(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure priority precedence.
(This feature may require a media converter module firmware upgrade)."
::= { exCMConfigEntry 53 }
exCMConfigEthernetCongestionPolicy OBJECT-TYPE
SYNTAX INTEGER {
notApplicable(-1),
strict(0),
weighted(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure priority congestion policy.
(This feature may require a media converter module firmware upgrade)."
::= { exCMConfigEntry 54 }
exCMConfigEthernetPriorityMap0 OBJECT-TYPE
SYNTAX INTEGER(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Change the priority of frames tagged with 802.1p priority 0.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This feature may require a media converter module firmware upgrade)."
::= { exCMConfigEntry 55 }
exCMConfigEthernetPriorityMap1 OBJECT-TYPE
SYNTAX INTEGER(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Change the priority of frames tagged with 802.1p priority 1.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This feature may require a media converter module firmware upgrade)."
::= { exCMConfigEntry 56 }
exCMConfigEthernetPriorityMap2 OBJECT-TYPE
SYNTAX INTEGER(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Change the priority of frames tagged with 802.1p priority 2.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This feature may require a media converter module firmware upgrade)."
::= { exCMConfigEntry 57 }
exCMConfigEthernetPriorityMap3 OBJECT-TYPE
SYNTAX INTEGER(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Change the priority of frames tagged with 802.1p priority 3.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This feature may require a media converter module firmware upgrade)."
::= { exCMConfigEntry 58 }
exCMConfigEthernetPriorityMap4 OBJECT-TYPE
SYNTAX INTEGER(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Change the priority of frames tagged with 802.1p priority 4.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This feature may require a media converter module firmware upgrade)."
::= { exCMConfigEntry 59 }
exCMConfigEthernetPriorityMap5 OBJECT-TYPE
SYNTAX INTEGER(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Change the priority of frames tagged with 802.1p priority 5.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This feature may require a media converter module firmware upgrade)."
::= { exCMConfigEntry 60 }
exCMConfigEthernetPriorityMap6 OBJECT-TYPE
SYNTAX INTEGER(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Change the priority of frames tagged with 802.1p priority 6.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This feature may require a media converter module firmware upgrade)."
::= { exCMConfigEntry 61 }
exCMConfigEthernetPriorityMap7 OBJECT-TYPE
SYNTAX INTEGER(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Change the priority of frames tagged with 802.1p priority 7.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This feature may require a media converter module firmware upgrade)."
::= { exCMConfigEntry 62 }
exCMConfigEthernetIngressLimit OBJECT-TYPE
SYNTAX INTEGER {
notApplicable(-1),
rateUnlimited(0),
rate64kbps(1),
rate128kbps(2),
rate192kbps(3),
rate256kbps(4),
rate320kbps(5),
rate384kbps(6),
rate512kbps(7),
rate768kbps(8),
rate1mbps (9),
rate2mbps (10),
rate3mbps (11),
rate4mbps (12),
rate5mbps (13),
rate6mbps (14),
rate7mbps (15),
rate8mbps (16),
rate9mbps (17),
rate10mbps (18),
rate20mbps (19),
rate30mbps (20),
rate40mbps (21),
rate50mbps (22),
rate60mbps (23),
rate70mbps (24),
rate80mbps (25),
rate90mbps (26)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set a limit on the rate of incoming packets.
(This feature may require a media converter module firmware upgrade)."
::= { exCMConfigEntry 63 }
exCMConfigEthernetEgressLimit OBJECT-TYPE
SYNTAX INTEGER {
notApplicable(-1),
rateUnlimited(0),
rate64kbps(1),
rate128kbps(2),
rate192kbps(3),
rate256kbps(4),
rate320kbps(5),
rate384kbps(6),
rate512kbps(7),
rate768kbps(8),
rate1mbps (9),
rate2mbps (10),
rate3mbps (11),
rate4mbps (12),
rate5mbps (13),
rate6mbps (14),
rate7mbps (15),
rate8mbps (16),
rate9mbps (17),
rate10mbps (18),
rate20mbps (19),
rate30mbps (20),
rate40mbps (21),
rate50mbps (22),
rate60mbps (23),
rate70mbps (24),
rate80mbps (25),
rate90mbps (26)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set a limit on the rate of outgoing packets.
(This feature may require a media converter module firmware upgrade)."
::= { exCMConfigEntry 64 }
exCMConfigEthernetDiscardTaggedFrames OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable discarding of tagged frames.
(This feature may require a media converter module firmware upgrade)."
::= { exCMConfigEntry 65 }
exCMConfigEthernetDiscardUntaggedFrames OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable discarding of untagged frames.
(This feature may require a media converter module firmware upgrade)."
::= { exCMConfigEntry 66 }
exCMConfigEthernetDefaultVlanId OBJECT-TYPE
SYNTAX INTEGER(0..4095)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the default VLAN ID to insert when tagging frames.
(This feature may require a media converter module firmware upgrade)."
::= { exCMConfigEntry 67 }
exCMConfigEthernetDefaultPriority OBJECT-TYPE
SYNTAX INTEGER(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the default frame priority.
(This feature may require a media converter module firmware upgrade)."
::= { exCMConfigEntry 68 }
exCMConfigEthernetVlanTaggingAction OBJECT-TYPE
SYNTAX INTEGER {
notApplicable(-1),
none(0),
untag(1),
tag(2),
doubleTag(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the default tagging action.
(This feature may require a media converter module firmware upgrade)."
::= { exCMConfigEntry 69 }
exCMConfigEthernetFilterUnknownMulticast OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable filtering of multicast frames with an unknown destination
(This feature may require a media converter module firmware upgrade)."
::= { exCMConfigEntry 70 }
exCMConfigEthernetFilterUnknownUnicast OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable filtering of unicast frames with an unknown destination
(This feature may require a media converter module firmware upgrade)."
::= { exCMConfigEntry 71 }
exCMConfigVdsl8021pPriority OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Use 802.1p tag priority.
(This feature may require a media converter module firmware upgrade)."
::= { exCMConfigEntry 72 }
exCMConfigVdslIpTosPriority OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Use IP TOS priority.
(This feature may require a media converter module firmware upgrade)."
::= { exCMConfigEntry 73 }
exCMConfigVdslPriorityPrecedence OBJECT-TYPE
SYNTAX INTEGER {
notApplicable(-1),
priority8021p(0),
priorityIpTos(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure priority precedence.
(This feature may require a media converter module firmware upgrade)."
::= { exCMConfigEntry 74 }
exCMConfigVdslCongestionPolicy OBJECT-TYPE
SYNTAX INTEGER {
notApplicable(-1),
strict(0),
weighted(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure priority congestion policy.
(This feature may require a media converter module firmware upgrade)."
::= { exCMConfigEntry 75 }
exCMConfigVdslPriorityMap0 OBJECT-TYPE
SYNTAX INTEGER(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Change the priority of frames tagged with 802.1p priority 0.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This feature may require a media converter module firmware upgrade)."
::= { exCMConfigEntry 76 }
exCMConfigVdslPriorityMap1 OBJECT-TYPE
SYNTAX INTEGER(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Change the priority of frames tagged with 802.1p priority 1.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This feature may require a media converter module firmware upgrade)."
::= { exCMConfigEntry 77 }
exCMConfigVdslPriorityMap2 OBJECT-TYPE
SYNTAX INTEGER(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Change the priority of frames tagged with 802.1p priority 2.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This feature may require a media converter module firmware upgrade)."
::= { exCMConfigEntry 78 }
exCMConfigVdslPriorityMap3 OBJECT-TYPE
SYNTAX INTEGER(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Change the priority of frames tagged with 802.1p priority 3.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This feature may require a media converter module firmware upgrade)."
::= { exCMConfigEntry 79 }
exCMConfigVdslPriorityMap4 OBJECT-TYPE
SYNTAX INTEGER(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Change the priority of frames tagged with 802.1p priority 4.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This feature may require a media converter module firmware upgrade)."
::= { exCMConfigEntry 80 }
exCMConfigVdslPriorityMap5 OBJECT-TYPE
SYNTAX INTEGER(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Change the priority of frames tagged with 802.1p priority 5.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This feature may require a media converter module firmware upgrade)."
::= { exCMConfigEntry 81 }
exCMConfigVdslPriorityMap6 OBJECT-TYPE
SYNTAX INTEGER(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Change the priority of frames tagged with 802.1p priority 6.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This feature may require a media converter module firmware upgrade)."
::= { exCMConfigEntry 82 }
exCMConfigVdslPriorityMap7 OBJECT-TYPE
SYNTAX INTEGER(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Change the priority of frames tagged with 802.1p priority 7.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This feature may require a media converter module firmware upgrade)."
::= { exCMConfigEntry 83 }
exCMConfigVdslIngressLimit OBJECT-TYPE
SYNTAX INTEGER {
notApplicable(-1),
rateUnlimited(0),
rate64kbps(1),
rate128kbps(2),
rate192kbps(3),
rate256kbps(4),
rate320kbps(5),
rate384kbps(6),
rate512kbps(7),
rate768kbps(8),
rate1mbps (9),
rate2mbps (10),
rate3mbps (11),
rate4mbps (12),
rate5mbps (13),
rate6mbps (14),
rate7mbps (15),
rate8mbps (16),
rate9mbps (17),
rate10mbps (18),
rate20mbps (19),
rate30mbps (20),
rate40mbps (21),
rate50mbps (22),
rate60mbps (23),
rate70mbps (24),
rate80mbps (25),
rate90mbps (26)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set a limit on the rate of incoming packets.
(This feature may require a media converter module firmware upgrade)."
::= { exCMConfigEntry 84 }
exCMConfigVdslEgressLimit OBJECT-TYPE
SYNTAX INTEGER {
notApplicable(-1),
rateUnlimited(0),
rate64kbps(1),
rate128kbps(2),
rate192kbps(3),
rate256kbps(4),
rate320kbps(5),
rate384kbps(6),
rate512kbps(7),
rate768kbps(8),
rate1mbps (9),
rate2mbps (10),
rate3mbps (11),
rate4mbps (12),
rate5mbps (13),
rate6mbps (14),
rate7mbps (15),
rate8mbps (16),
rate9mbps (17),
rate10mbps (18),
rate20mbps (19),
rate30mbps (20),
rate40mbps (21),
rate50mbps (22),
rate60mbps (23),
rate70mbps (24),
rate80mbps (25),
rate90mbps (26)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set a limit on the rate of outgoing packets.
(This feature may require a media converter module firmware upgrade)."
::= { exCMConfigEntry 85 }
exCMConfigVdslDiscardTaggedFrames OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable discarding of tagged frames.
(This feature may require a media converter module firmware upgrade)."
::= { exCMConfigEntry 86 }
exCMConfigVdslDiscardUntaggedFrames OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable discarding of untagged frames.
(This feature may require a media converter module firmware upgrade)."
::= { exCMConfigEntry 87 }
exCMConfigVdslDefaultVlanId OBJECT-TYPE
SYNTAX INTEGER(0..4095)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the default VLAN ID to insert when tagging frames.
(This feature may require a media converter module firmware upgrade)."
::= { exCMConfigEntry 88 }
exCMConfigVdslDefaultPriority OBJECT-TYPE
SYNTAX INTEGER(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the default frame priority.
(This feature may require a media converter module firmware upgrade)."
::= { exCMConfigEntry 89 }
exCMConfigVdslVlanTaggingAction OBJECT-TYPE
SYNTAX INTEGER {
notApplicable(-1),
none(0),
untag(1),
tag(2),
doubleTag(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the default tagging action.
(This feature may require a media converter module firmware upgrade)."
::= { exCMConfigEntry 90 }
exCMConfigVdslFilterUnknownMulticast OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable filtering of multicast frames with an unknown destination
(This feature may require a media converter module firmware upgrade)."
::= { exCMConfigEntry 91 }
exCMConfigVdslFilterUnknownUnicast OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable filtering of unicast frames with an unknown destination
(This feature may require a media converter module firmware upgrade)."
::= { exCMConfigEntry 92 }
exCMConfigVdslFastMode OBJECT-TYPE
SYNTAX EnableDisableValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the VDSL fast mode setting."
::= { exCMConfigEntry 93 }
--
--
-- exCMConfigEntry
--
--
-- exCMLedTable
--
exCMLedTable OBJECT-TYPE
SYNTAX SEQUENCE OF ExCMLedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of CM-1110 type media converter module's LED status information."
::= { exCM 3 }
exCMLedEntry OBJECT-TYPE
SYNTAX ExCMLedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of the table, each relating to a separate CM-1110 type
media converter module."
INDEX { mcrChassisIndex, exCMLedSlotIndex }
::= { exCMLedTable 1 }
ExCMLedEntry ::=
SEQUENCE {
exCMLedSlotIndex SlotNumber,
exCMLedILNK INTEGER,
exCMLedLOC INTEGER,
exCMLedPWR INTEGER,
exCMLedETH INTEGER,
exCMLedRMT INTEGER
}
exCMLedSlotIndex OBJECT-TYPE
SYNTAX SlotNumber
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Slot number of the module"
::= { exCMLedEntry 2 }
exCMLedILNK OBJECT-TYPE
SYNTAX INTEGER {
off(0),
slowBlinkingGreen(1),
fastBlinkingGreen(2),
green(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the status of the ILNK (InterLink) LED on the media converter module.
Possible status values are:
slowBlinkingGreen(1) - ILNK port is idle or handshaking
fastBlinkingGreen(2) - ILNK port is training
green(3) - ILNK port is up"
::= { exCMLedEntry 3 }
exCMLedLOC OBJECT-TYPE
SYNTAX INTEGER {
off(0),
green(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the status of the Local (LOC) LED
on the media converter module. When this LED is green, it indicates
that the InterLink port's VDSL role is local."
::= { exCMLedEntry 4 }
exCMLedPWR OBJECT-TYPE
SYNTAX INTEGER {
off(0),
onGreen(1),
blinking(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the status of the power (PWR) LED on the media converter module.
Possible status values are:
off(0) - No power to the module
onGreen(1) - Power being applied to module
blinking(2) - InterLink loopback enabled"
::= { exCMLedEntry 5 }
exCMLedETH OBJECT-TYPE
SYNTAX INTEGER {
off(0),
slowBlinkingGreen(1),
green(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the status of the ETH (Ethernet) LED on the media converter module.
Possible status values are:
off(0) - ETH port is down
slowBlinkingGreen(1) - ETH port is down, due to the VDSL port or peer copper ethernet port being down
green(2) - ETH port is up"
::= { exCMLedEntry 6 }
exCMLedRMT OBJECT-TYPE
SYNTAX INTEGER {
off(0),
green(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the status of the Remote (RMT) LED
on the media converter module. When this LED is green, it indicates
that the InterLink port's VDSL role is remote."
::= { exCMLedEntry 7 }
--
-- end of exCMLedTable
--
--
-- exCMStatsTable
--
exCMStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF ExCMStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of CM-1110 type media converter module's configuration and status type
information."
::= { exCM 4 }
exCMStatsEntry OBJECT-TYPE
SYNTAX ExCMStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of the table, each relating to a separate CM-1110 type
media converter module."
INDEX { mcrChassisIndex, exCMStatsSlotIndex, exCMMediaPortIndex }
::= { exCMStatsTable 1 }
ExCMStatsEntry ::=
SEQUENCE {
exCMStatsSlotIndex SlotNumber,
exCMMediaPortIndex INTEGER,
exCMPortInDiscards Counter32,
exCMPortInFiltered INTEGER,
exCMPortInGoodOctets Counter32,
exCMPortHCInGoodOctets Counter64,
exCMPortInBadOctets Counter32,
exCMPortInUnicasts Counter32,
exCMPortInBroadcasts Counter32,
exCMPortInMulticasts Counter32,
exCMPortInPauses Counter32,
exCMPortInUnderSizes Counter32,
exCMPortInFragments Counter32,
exCMPortInOversizes Counter32,
exCMPortInJabbers Counter32,
exCMPortInRxErrs Counter32,
exCMPortInFcsErrs Counter32,
exCMPortPkts64Octets Counter32,
exCMPortPkts65to127Octets Counter32,
exCMPortPkts128to255Octets Counter32,
exCMPortPkts256to511Octets Counter32,
exCMPortPkts512to1023Octets Counter32,
exCMPortPkts1024toMaxOctets Counter32,
exCMPortOutOctets Counter32,
exCMPortHCOutOctets Counter64,
exCMPortOutFiltered INTEGER,
exCMPortOutUnicasts Counter32,
exCMPortOutBroadcasts Counter32,
exCMPortOutMulticasts Counter32,
exCMPortOutPauses Counter32,
exCMPortDeferreds Counter32,
exCMPortCollisions Counter32,
exCMPortSingles Counter32,
exCMPortMultiples Counter32,
exCMPortExcessives Counter32,
exCMPortLates Counter32,
exCMPortOutFcsErrs Counter32,
exCMPortResetCounters YesNoValue
}
exCMStatsSlotIndex OBJECT-TYPE
SYNTAX SlotNumber
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Slot number the ex-1CM type module is currently inserted"
::= { exCMStatsEntry 2 }
exCMMediaPortIndex OBJECT-TYPE
SYNTAX INTEGER (1..2)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Media converter module port index indicating which media port the statistical
counters are associated with."
::= { exCMStatsEntry 3 }
exCMPortInDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A counter that counts the number of good, non-filtered frames that
normally would have been forwarded, but could not due to lack of
buffer space."
::= { exCMStatsEntry 4 }
exCMPortInFiltered OBJECT-TYPE
SYNTAX INTEGER(0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A counter that counts the number of good frames that were filtered
due to ingress switch policy rules. "
::= { exCMStatsEntry 5 }
exCMPortInGoodOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An ingress counter that is the sum of lengths of all good Ethernet
frames received on the media port."
::= { exCMStatsEntry 6 }
exCMPortHCInGoodOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An ingress counter that is the sum of lengths of all good Ethernet
frames received on the media port. This object is a 64-bit version of
exCMPortInGoodOctets."
::= { exCMStatsEntry 7 }
exCMPortInBadOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An ingress counter that is the sum of lengths of all bad Ethernet
frames received on the media port.."
::= { exCMStatsEntry 8 }
exCMPortInUnicasts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An ingress counter that counts the number of good frames received that
have a Unicast destination MAC address."
::= { exCMStatsEntry 9 }
exCMPortInBroadcasts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An ingress counter that counts the number of good frames received that
have a Broadcast destination MAC address."
::= { exCMStatsEntry 10 }
exCMPortInMulticasts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An ingress counter that counts the number of good frames received that
have a Multicast destination MAC address. This count does not include
frames counted in the exCMPortInPauses or the exCMPortInBroadcasts
objects."
::= { exCMStatsEntry 11 }
exCMPortInPauses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An ingress counter that counts the number of good frames reachieved that
have a Pause destination MAC address."
::= { exCMStatsEntry 12 }
exCMPortInUnderSizes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An ingress counter that counts the number of frames received with a
length less that 64 octets but with a valid FCS."
::= { exCMStatsEntry 13 }
exCMPortInFragments OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An ingress counter that counts the number of frames received with a
length less that 64 octets and an invalid FCS."
::= { exCMStatsEntry 14 }
exCMPortInOversizes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An ingress counter that counts the number of frames received with a
length more than the maximum packet size but with a valid FCS.
The maximum packet size can be set using the exCMConfigMaxPacketsSize
object."
::= { exCMStatsEntry 15 }
exCMPortInJabbers OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An ingress counter that counts the number of frames received with a
length more than the maximum packet size but with a invalid FCS.
The maximum packet size can be set using the exCMConfigMaxPacketsSize
object."
::= { exCMStatsEntry 16 }
exCMPortInRxErrs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An ingress counter that counts the number of frames received with an
RxErr signal from the PHY."
::= { exCMStatsEntry 17 }
exCMPortInFcsErrs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An ingress counter that counts the number of frames received with a
CRC error not counted in the exCMPortInFragments,
exCMPortInFcsErr, or the exCMPortInRxErr objects."
::= { exCMStatsEntry 18 }
exCMPortPkts64Octets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A Histogram counter that counts the number of frames received and
transmitted with a length of exactly 64 Octets, including those with
errors."
::= { exCMStatsEntry 19 }
exCMPortPkts65to127Octets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A Histogram counter that counts the number of frames received and
transmitted with a length of between 65 and 127 Octets inclusive,
including those with errors."
::= { exCMStatsEntry 20 }
exCMPortPkts128to255Octets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A Histogram counter that counts the number of frames received and
transmitted with a length of between 128 and 255 Octets inclusive,
including those with errors."
::= { exCMStatsEntry 21 }
exCMPortPkts256to511Octets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A Histogram counter that counts the number of frames received and
transmitted with a length of between 256 and 511 Octets inclusive,
including those with errors."
::= { exCMStatsEntry 22 }
exCMPortPkts512to1023Octets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A Histogram counter that counts the number of frames received and
transmitted with a length of between 512 and 1023 Octets inclusive,
including those with errors."
::= { exCMStatsEntry 23 }
exCMPortPkts1024toMaxOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A Histogram counter that counts the number of frames received and
transmitted with a length of between 1024 and maximum packet size
octets inclusive, including those with errors.
The maximum packet size can be set using the exCMConfigMaxPacketsSize
object."
::= { exCMStatsEntry 24 }
exCMPortOutOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An Egress counter that is the sum of lengths of all good Ethernet
frames sent on the media port."
::= { exCMStatsEntry 25 }
exCMPortHCOutOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An Egress counter that is the sum of lengths of all good Ethernet
frames sent on the media port. This object is a 64-bit version of
exCMPortOutOctets."
::= { exCMStatsEntry 26 }
exCMPortOutFiltered OBJECT-TYPE
SYNTAX INTEGER(0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A counter that counts the number of good frames that were filtered
due to egress switch policy rules."
::= { exCMStatsEntry 27 }
exCMPortOutUnicasts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An Egress counter that counts the number of good frames sent that
have a Unicast destination MAC address."
::= { exCMStatsEntry 28 }
exCMPortOutBroadcasts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An Egress counter that counts the number of good frames sent that
have a Broadcast destination MAC address."
::= { exCMStatsEntry 29 }
exCMPortOutMulticasts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An Egress counter that counts the number of good frames sent that
have a Multicast destination MAC address. This count does not include
frames counted in the exCMPortOutPauses or the exCMPortOutBroadcasts
objects."
::= { exCMStatsEntry 30 }
exCMPortOutPauses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An Egress counter that counts the number of good frames reachieved that
have a Pause destination MAC address."
::= { exCMStatsEntry 31 }
exCMPortDeferreds OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An Egress counter that counts the number of successfully transmitted
frames that experienced no collisions but are delayed because the
medium was busy during the first attempt. This counter is applicable
in half-duplex only."
::= { exCMStatsEntry 32 }
exCMPortCollisions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An Egress counter that counts the number of collision events seen by
the MAC not including those counted in exCMPortSingles,
exCMPortMultiple , exCMPortExcessives or exCMPortLates objects.
This counter is applicable in half-duplex only."
::= { exCMStatsEntry 33 }
exCMPortSingles OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An Egress counter that counts the number of successfully transmitted
frames that experienced exactly one collision. This counter is
applicable in half-duplex only."
::= { exCMStatsEntry 34 }
exCMPortMultiples OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An Egress counter that counts the number of successfully transmitted
frames that experienced more than one collision. This counter is
aplicable in half-duplex only."
::= { exCMStatsEntry 35 }
exCMPortExcessives OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An Egress counter that counts the number frames dropped in the transmit
MAC because the frame experienced 16 consecutive collisions. This
counter is applicable in half-duplex only. "
::= { exCMStatsEntry 36 }
exCMPortLates OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An Egress counter that counts the number times a collision is detected
later than 512 bits-times into the transmission of a frame. This
counter is applicable in half-duplex only."
::= { exCMStatsEntry 37 }
exCMPortOutFcsErrs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An Egress counter that counts the number frames transmitted with an
invalid FCS. "
::= { exCMStatsEntry 38 }
exCMPortResetCounters OBJECT-TYPE
SYNTAX YesNoValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allows the resetting of all exCMStats statistical counters
for this port. "
::= { exCMStatsEntry 39 }
--
-- end of exCMStatsTable
--
-- exCMStatsTable
--
exCMVdslStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF ExCMVdslStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of CM-1110 type media converter module's configuration and status type
information."
::= { exCM 5 }
exCMVdslStatsEntry OBJECT-TYPE
SYNTAX ExCMVdslStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of the table, each relating to a separate CM-1110 type
media converter module."
INDEX { mcrChassisIndex, exCMVdslStatsSlotIndex, exCMVdslStatsMediaPortIndex, exCMVdslStatsTimePeriod }
::= { exCMVdslStatsTable 1 }
ExCMVdslStatsEntry ::=
SEQUENCE {
exCMVdslStatsSlotIndex SlotNumber,
exCMVdslStatsMediaPortIndex Unsigned32,
exCMVdslStatsTimePeriod INTEGER,
exCMVdslStatsFullInitLocal Integer32,
exCMVdslStatsCodeViolationLocal Integer32,
exCMVdslStatsCorrectedLocal Integer32,
exCMVdslStatsFecSecsLocal Integer32,
exCMVdslStatsErroredSecsLocal Integer32,
exCMVdslStatsSeverelyErroredSecsLocal Integer32,
exCMVdslStatsLossOfSignalSecsLocal Integer32,
exCMVdslStatsUnavailableSecsLocal Integer32,
exCMVdslStatsTimeElapsedLocal Integer32,
exCMVdslStatsFullInitRemote Integer32,
exCMVdslStatsCodeViolationRemote Integer32,
exCMVdslStatsCorrectedRemote Integer32,
exCMVdslStatsFecSecsRemote Integer32,
exCMVdslStatsErroredSecsRemote Integer32,
exCMVdslStatsSeverelyErroredSecsRemote Integer32,
exCMVdslStatsLossOfSignalSecsRemote Integer32,
exCMVdslStatsUnavailableSecsRemote Integer32,
exCMVdslStatsTimeElapsedRemote Integer32
}
exCMVdslStatsSlotIndex OBJECT-TYPE
SYNTAX SlotNumber
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Slot number the ex-1CM type module is currently inserted"
::= { exCMVdslStatsEntry 2 }
exCMVdslStatsMediaPortIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Media converter module port index indicating which media port the statistical
counters are associated with."
::= { exCMVdslStatsEntry 3 }
exCMVdslStatsTimePeriod OBJECT-TYPE
SYNTAX INTEGER {
sinceLinkup(1),
current15Minutes(2),
previous15Minutes(3),
current24Hours(4),
previous24Hours(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module port index indicating which media port the statistical
counters are associated with."
::= { exCMVdslStatsEntry 4 }
exCMVdslStatsFullInitLocal OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VDSL port's fully initialized (local) count."
::= { exCMVdslStatsEntry 5 }
exCMVdslStatsCodeViolationLocal OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VDSL port's code violation (local) count."
::= { exCMVdslStatsEntry 6 }
exCMVdslStatsCorrectedLocal OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VDSL port's corrected (local) count."
::= { exCMVdslStatsEntry 7 }
exCMVdslStatsFecSecsLocal OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VDSL port's forward error correction seconds (local) count."
::= { exCMVdslStatsEntry 8 }
exCMVdslStatsErroredSecsLocal OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VDSL port's errored seconds (local) count."
::= { exCMVdslStatsEntry 9 }
exCMVdslStatsSeverelyErroredSecsLocal OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VDSL port's severely errored seconds (local) count."
::= { exCMVdslStatsEntry 10 }
exCMVdslStatsLossOfSignalSecsLocal OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VDSL port's loss of signal seconds (local) count."
::= { exCMVdslStatsEntry 11 }
exCMVdslStatsUnavailableSecsLocal OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VDSL port's unavailable seconds (local) count."
::= { exCMVdslStatsEntry 12 }
exCMVdslStatsTimeElapsedLocal OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VDSL port's elapsed time in seconds (local) count."
::= { exCMVdslStatsEntry 13 }
exCMVdslStatsFullInitRemote OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VDSL port's fully initialized (remote) count."
::= { exCMVdslStatsEntry 14 }
exCMVdslStatsCodeViolationRemote OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VDSL port's code violation (remote) count."
::= { exCMVdslStatsEntry 15 }
exCMVdslStatsCorrectedRemote OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VDSL port's corrected (remote) count."
::= { exCMVdslStatsEntry 16 }
exCMVdslStatsFecSecsRemote OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VDSL port's forward error correction seconds (remote) count."
::= { exCMVdslStatsEntry 17 }
exCMVdslStatsErroredSecsRemote OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VDSL port's errored seconds (remote) count."
::= { exCMVdslStatsEntry 18 }
exCMVdslStatsSeverelyErroredSecsRemote OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VDSL port's severely errored seconds (remote) count."
::= { exCMVdslStatsEntry 19 }
exCMVdslStatsLossOfSignalSecsRemote OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VDSL port's loss of signal seconds (remote) count."
::= { exCMVdslStatsEntry 20 }
exCMVdslStatsUnavailableSecsRemote OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VDSL port's unavailable seconds (remote) count."
::= { exCMVdslStatsEntry 21 }
exCMVdslStatsTimeElapsedRemote OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VDSL port's elapsed time in seconds (remote) count."
::= { exCMVdslStatsEntry 22 }
--
-- exCMAvctTable
--
exCMAvctTable OBJECT-TYPE
SYNTAX SEQUENCE OF ExCMAvctEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of ex-CM media converter modules."
::= { exCM 6 }
exCMAvctEntry OBJECT-TYPE
SYNTAX ExCMAvctEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of the table, each relating to a copper Ethernet
port on the eX-CM type media converter module."
INDEX { mcrChassisIndex, exCMAvctSlotIndex }
::= { exCMAvctTable 1 }
ExCMAvctEntry ::=
SEQUENCE {
exCMAvctSlotIndex SlotNumber,
exCMAvctStart YesNoValue,
exCMAvctStatus INTEGER,
exCMAvctTxRxPair1Results INTEGER,
exCMAvctTxRxPair1Amplitude DisplayString,
exCMAvctTxRxPair1Distance DisplayString,
exCMAvctTxRxPair2Results INTEGER,
exCMAvctTxRxPair2Amplitude DisplayString,
exCMAvctTxRxPair2Distance DisplayString,
exCMAvctTxRxPair3Results INTEGER,
exCMAvctTxRxPair3Amplitude DisplayString,
exCMAvctTxRxPair3Distance DisplayString,
exCMAvctTxRxPair4Results INTEGER,
exCMAvctTxRxPair4Amplitude DisplayString,
exCMAvctTxRxPair4Distance DisplayString
}
exCMAvctSlotIndex OBJECT-TYPE
SYNTAX SlotNumber
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Slot number the eX-CM type module is currently inserted"
::= { exCMAvctEntry 2 }
exCMAvctStart OBJECT-TYPE
SYNTAX YesNoValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set this self-clearing variable to yes initiate the Advanced Virtual
Cable Test. Note: During the test, no network data will be passed. "
::= { exCMAvctEntry 3 }
exCMAvctStatus OBJECT-TYPE
SYNTAX INTEGER {
notStarted(0),
inProgress(1),
testComplete(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the state of the Advanced Virtual Cable Tester. "
::= { exCMAvctEntry 4 }
exCMAvctTxRxPair1Results OBJECT-TYPE
SYNTAX INTEGER {
normal(0),
shortDetected(1),
openDetected(2),
testFailed(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Test result code returned from Virtual Cable Test of the Tx/Rx
pair one."
::= { exCMAvctEntry 5 }
exCMAvctTxRxPair1Amplitude OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Amplitude of Tx/Rx pair one in millivolts when test result codes is
short or open."
::= { exCMAvctEntry 6 }
exCMAvctTxRxPair1Distance OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Distance in meters to fault when test result codes for Tx/Rx pair
one is short or open. "
::= { exCMAvctEntry 7 }
exCMAvctTxRxPair2Results OBJECT-TYPE
SYNTAX INTEGER {
normal(0),
shortDetected(1),
openDetected(2),
testFailed(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Test result code returned from Virtual Cable Test of the Tx/Rx
pair two."
::= { exCMAvctEntry 8 }
exCMAvctTxRxPair2Amplitude OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Amplitude of Tx/Rx pair two in millivolts when test result codes is
short or open."
::= { exCMAvctEntry 9 }
exCMAvctTxRxPair2Distance OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Distance in meters to fault when test result codes for Tx/Rx pair
two is short or open. "
::= { exCMAvctEntry 10 }
exCMAvctTxRxPair3Results OBJECT-TYPE
SYNTAX INTEGER {
normal(0),
shortDetected(1),
openDetected(2),
testFailed(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Test result code returned from Virtual Cable Test of the Tx/Rx
pair three."
::= { exCMAvctEntry 11 }
exCMAvctTxRxPair3Amplitude OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Amplitude of Tx/Rx pair three in millivolts when test result codes is
short or open."
::= { exCMAvctEntry 12 }
exCMAvctTxRxPair3Distance OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Distance in meters to fault when test result codes for Tx/Rx pair
three is short or open. "
::= { exCMAvctEntry 13 }
exCMAvctTxRxPair4Results OBJECT-TYPE
SYNTAX INTEGER {
normal(0),
shortDetected(1),
openDetected(2),
testFailed(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Test result code returned from Virtual Cable Test of Tx/Rx
pair four."
::= { exCMAvctEntry 14 }
exCMAvctTxRxPair4Amplitude OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Amplitude of Tx/Rx pair four in millivolts when test result codes is
short or open."
::= { exCMAvctEntry 15 }
exCMAvctTxRxPair4Distance OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Distance in meters to fault when test result codes for Tx/Rx pair
four is short or open. "
::= { exCMAvctEntry 16 }
--
-- exCMAvctTable
--
--
-- end of exCM
--
-- cm10gt - 10 Gb fixed media Converter type modules
--
cm10gt OBJECT IDENTIFIER ::= { mcrModuleTypes 10 }
--
-- cm10gtTable
--
cm10gtTable OBJECT-TYPE
SYNTAX SEQUENCE OF Cm10gtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of CM-10G type media converter module's status type information."
::= { cm10gt 1 }
cm10gtEntry OBJECT-TYPE
SYNTAX Cm10gtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of the table, each relating to a separate CM-10G type
media converter module."
INDEX { mcrChassisIndex, cm10gtSlotIndex }
::= { cm10gtTable 1 }
Cm10gtEntry ::=
SEQUENCE {
cm10gtSlotIndex SlotNumber,
cm10gtModelname DisplayString,
cm10gtModelDesc DisplayString,
cm10gtHwJmp5ConfigMode INTEGER,
cm10gtHwSw1OperationMode INTEGER,
cm10gtHwSw2LinkMode INTEGER,
cm10gtHwSw3FiberFaultAlert INTEGER,
cm10gtHwSw4EnergyEfficentEthernet INTEGER,
cm10gtHwSw5Unused INTEGER,
cm10gtPort1LinkStatus INTEGER,
cm10gtPort1ConnType INTEGER,
cm10gtPort1AutoNegState INTEGER,
cm10gtPort1Speed INTEGER,
cm10gtPort1Duplex INTEGER,
cm10gtPort1PauseEnh INTEGER,
cm10gtPort1ReceiveStatus INTEGER,
cm10gtPort1LPRFStatus INTEGER,
cm10gtPort2LinkStatus INTEGER,
cm10gtPort2ConnType INTEGER,
cm10gtPort2AutoNegState INTEGER,
cm10gtPort2Speed INTEGER,
cm10gtPort2Duplex INTEGER,
cm10gtPort2PauseEnh INTEGER,
cm10gtPort2LPRFStatus INTEGER,
cm10gtPortLoopBack INTEGER,
cm10gtPortTestMode INTEGER
}
cm10gtSlotIndex OBJECT-TYPE
SYNTAX SlotNumber
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Slot number the CM-10G type module is currently inserted"
::= { cm10gtEntry 2 }
cm10gtModelname OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the model of media converter module present in the
chassis"
::= { cm10gtEntry 3 }
cm10gtModelDesc OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies a static description of the media converter module present
in the chassis"
::= { cm10gtEntry 4 }
cm10gtHwJmp5ConfigMode OBJECT-TYPE
SYNTAX INTEGER {
hardwareSwitches(0),
auto(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the media converter module's ConfigMode, set by hardware
jumper J5 on the media converter module. When this object is set to
hardwareSwitches(0), the media converter module will disable configuration
control from the management module's software and all configuration
control comes from the media converter module's hardware switches or jumpers. "
::= { cm10gtEntry 5 }
cm10gtHwSw1OperationMode OBJECT-TYPE
SYNTAX INTEGER{
test(0),
data(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current switch setting for operation mode.
Data mode is for normal data transmission."
::= { cm10gtEntry 6 }
cm10gtHwSw2LinkMode OBJECT-TYPE
SYNTAX INTEGER {
swDownSmartLinkPassthrough(0),
swUpStandard(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current switch setting for Link Mode. If
the Operation switch is set to Test, then this object indicates
whether the port is in loopback or performing the build in link-test."
::= { cm10gtEntry 7 }
cm10gtHwSw3FiberFaultAlert OBJECT-TYPE
SYNTAX INTEGER {
swDownDisabled(0),
swUpEnabled(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current switch setting for Fiber Fault
Alert. If the Operation switch is set to Test, then this object
indicates which port is in test mode"
::= { cm10gtEntry 8 }
cm10gtHwSw4EnergyEfficentEthernet OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the current switch setting for Energy Efficient
Ethernet on port 2."
::= { cm10gtEntry 9 }
cm10gtHwSw5Unused OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the current switch setting for dip switch 5,
which is unused."
::= { cm10gtEntry 10 }
cm10gtPort1LinkStatus OBJECT-TYPE
SYNTAX INTEGER {
down(0),
up(1),
shutdown(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current fiber link status (port 1)."
::= { cm10gtEntry 11 }
cm10gtPort1ConnType OBJECT-TYPE
SYNTAX INTEGER {
sc(0),
lc(1),
st(2),
sfp(3),
fc(5),
mtrj(6),
xfp(7),
sfpPlus(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's fiber port connector type (port 1)."
::= { cm10gtEntry 12 }
cm10gtPort1AutoNegState OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
complete(1),
inProgress(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current fiber auto-negotiation state (port 1)."
::= { cm10gtEntry 13 }
cm10gtPort1Speed OBJECT-TYPE
SYNTAX INTEGER {
speed10Mbps(0),
speed100Mbps(1),
speed1000Mbps(2),
speed10Gbps(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's fiber port speed in megabits per second (port 1)."
::= { cm10gtEntry 14 }
cm10gtPort1Duplex OBJECT-TYPE
SYNTAX INTEGER {
half(0),
full(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If fiber auto-negotiation state is complete then this object
indicates the media converter module's current fiber auto-negotiated duplex
setting. If auto-negotiation is not complete then the value returned should be
ignored. (Port 1)"
::= { cm10gtEntry 15 }
cm10gtPort1PauseEnh OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
symmetrical(1),
asymmetricalTx(2),
asymmetricalRx(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If fiber auto-negotiation state is complete then this object indicates
the media converter module's current fiber auto-negotiated pause setting. If
auto-negotiation is not complete then the value returned should be ignored.
(Port 1)"
::= { cm10gtEntry 16 }
cm10gtPort1ReceiveStatus OBJECT-TYPE
SYNTAX INTEGER {
fault(0),
ok(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the status of whether light is being received
on the fiber port (port 1)"
::= { cm10gtEntry 17 }
cm10gtPort1LPRFStatus OBJECT-TYPE
SYNTAX INTEGER {
notApplicable(-1),
ok(0),
offline(1),
linkFault(2),
autoNegError(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's Link Partner Remote Fault status (port 1). This object
only applies to SFP modules running at 1G, with auto-negotiation enabled."
::= { cm10gtEntry 18 }
cm10gtPort2LinkStatus OBJECT-TYPE
SYNTAX INTEGER {
down(0),
up(1),
shutdown(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current fiber link status (port 2)."
::= { cm10gtEntry 19 }
cm10gtPort2ConnType OBJECT-TYPE
SYNTAX INTEGER {
rj45(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's fiber port connector type (port 2)."
::= { cm10gtEntry 20 }
cm10gtPort2AutoNegState OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
complete(1),
inProgress(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current fiber auto-negotiation state (port 2)."
::= { cm10gtEntry 21 }
cm10gtPort2Speed OBJECT-TYPE
SYNTAX INTEGER {
speed10Mbps(0),
speed100Mbps(1),
speed1000Mbps(2),
speed10Gbps(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's fiber port speed in megabits per second (port 2)."
::= { cm10gtEntry 22 }
cm10gtPort2Duplex OBJECT-TYPE
SYNTAX INTEGER {
half(0),
full(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If fiber auto-negotiation state is complete then this object
indicates the media converter module's current fiber auto-negotiated duplex
setting. If auto-negotiation is not complete then the value returned should be
ignored. (Port 2)"
::= { cm10gtEntry 23 }
cm10gtPort2PauseEnh OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
symmetrical(1),
asymmetricalTx(2),
asymmetricalRx(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If fiber auto-negotiation state is complete then this object indicates
the media converter module's current fiber auto-negotiated pause setting. If
auto-negotiation is not complete then the value returned should be ignored.
(Port 2)"
::= { cm10gtEntry 24 }
cm10gtPort2LPRFStatus OBJECT-TYPE
SYNTAX INTEGER {
ok(0),
remoteFault(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's copper Link Partner Remote Fault status."
::= { cm10gtEntry 25 }
cm10gtPortLoopBack OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
port1(1),
port2(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Media converter module's current port loopback mode setting. Writing to this
object will change the current settings. This object is read-only if
the media converter module's ConfigMode jumper is set to hardwareSwitches(0)."
::= { cm10gtEntry 26 }
cm10gtPortTestMode OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
port1(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current port test mode setting."
::= { cm10gtEntry 27 }
--
-- cm10gtTable
--
--
-- cm10gtConfigTable
--
cm10gtConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF Cm10gtConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of CM-10G type media converter module's configuration type information."
::= { cm10gt 2 }
cm10gtConfigEntry OBJECT-TYPE
SYNTAX Cm10gtConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of the table, each relating to a separate CM-10G type
media converter module."
INDEX { mcrChassisIndex, cm10gtConfigSlotIndex }
::= { cm10gtConfigTable 1 }
Cm10gtConfigEntry ::=
SEQUENCE {
cm10gtConfigSlotIndex SlotNumber,
cm10gtConfigStatus ContainerStatus,
cm10gtConfigModuleName DisplayString,
cm10gtConfigLinkMode INTEGER,
cm10gtConfigFiberFaultAlert EnableDisableValue,
cm10gtConfigFiberAutoNeg EnableDisableValue,
cm10gtConfigPort1Name DisplayString,
cm10gtConfigPort1Enable YesNoValue,
cm10gtConfigPort1FecEnable YesNoValue,
cm10gtConfigPort1FecAmplitude INTEGER,
cm10gtConfigPort1FecPhase INTEGER,
cm10gtConfigPort1WavelengthEnable YesNoValue,
cm10gtConfigPort1WavelengthValue INTEGER,
cm10gtConfigPort1ChannelEnable YesNoValue,
cm10gtConfigPort1ChannelNumber INTEGER,
cm10gtConfigPort1TxDitherEnable YesNoValue,
cm10gtConfigPort1TxDitherValue EnableDisableValue,
cm10gtConfigPort2Name DisplayString,
cm10gtConfigPort2Enable YesNoValue,
cm10gtConfigPort2CopperDuplex INTEGER,
cm10gtConfigPort2CopperPauseEnh INTEGER,
cm10gtConfigPort2CopperEnergyEfficientEthernet OnOffValue
}
cm10gtConfigSlotIndex OBJECT-TYPE
SYNTAX SlotNumber
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Slot number the CM-10G type module is currently inserted"
::= { cm10gtConfigEntry 2 }
cm10gtConfigStatus OBJECT-TYPE
SYNTAX ContainerStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When you perform a GET on this variable, one of
the following values will be returned:
1-Indicates that the container folder is active with no changes.
2-Indicates that the container folder is active with change(s).
Once you have completed setting the variables in a folder, you
will want to submit your changes to the management module. To do
this, set the Status variable to 4. If you want to discard the
changes, set the Status variable to 6.
4-Indicates that the changes in the container folder are to be
submitted to the management module, verified and and saved to flash.
6-Indicates that the changes in the container folder are to be
discarded."
::= { cm10gtConfigEntry 3 }
cm10gtConfigModuleName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..63))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies a user configurable name for the media converter module
present in the chassis. "
::= { cm10gtConfigEntry 4 }
cm10gtConfigLinkMode OBJECT-TYPE
SYNTAX INTEGER {
standard(0),
smartLinkPassthrough(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the Link Mode for the media converter module. This object
is read-only if the media converter module's ConfigMode jumper is set to
hardwareSwitches(0)."
::= { cm10gtConfigEntry 5 }
cm10gtConfigFiberFaultAlert OBJECT-TYPE
SYNTAX EnableDisableValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the Fiber Fault Alert setting for the media
module. This object is read-only if the media converter module's ConfigMode
jumper is set to hardwareSwitches(0). "
::= { cm10gtConfigEntry 6 }
cm10gtConfigFiberAutoNeg OBJECT-TYPE
SYNTAX EnableDisableValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the wither fiber auto-negotiation is
enabled for both ports. This only applies if 1G SFP modules are in
use. This object is read-only if the media module's ConfigMode
jumper is set to hardwareSwitches(0)."
::= { cm10gtConfigEntry 7 }
cm10gtConfigPort1Name OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..8))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies a user definable name for port 1."
::= { cm10gtConfigEntry 8 }
cm10gtConfigPort1Enable OBJECT-TYPE
SYNTAX YesNoValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies whether port 1 is enabled."
::= { cm10gtConfigEntry 9 }
cm10gtConfigPort1FecEnable OBJECT-TYPE
SYNTAX YesNoValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the whether FEC control is enabled for this
port. This config option only applies for an XFP module. This
object is read-only if the media module's ConfigMode jumper is set
to hardwareSwitches(0)."
::= { cm10gtConfigEntry 10 }
cm10gtConfigPort1FecAmplitude OBJECT-TYPE
SYNTAX INTEGER(-128..127)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the FEC Amplitude value for this port. This
config option only applies for an XFP module. This object is
read-only if the media converter module's ConfigMode jumper is set to
hardwareSwitches(0)."
::= { cm10gtConfigEntry 11 }
cm10gtConfigPort1FecPhase OBJECT-TYPE
SYNTAX INTEGER(-128..127)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the FEC phase value for this port. This
config option only applies for an XFP module. This object is
read-only if the media converter module's ConfigMode jumper is set to
hardwareSwitches(0)."
::= { cm10gtConfigEntry 12 }
cm10gtConfigPort1WavelengthEnable OBJECT-TYPE
SYNTAX YesNoValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies whether Wavelength fine tuning is enabled for
this port. This object is read-only if the media module's ConfigMode
jumper is set to hardwareSwitches(0)."
::= { cm10gtConfigEntry 13 }
cm10gtConfigPort1WavelengthValue OBJECT-TYPE
SYNTAX INTEGER(0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies Wavelength fine tuning value for this port.
This object is read-only if the media converter module's ConfigMode
jumper is set to hardwareSwitches(0)."
::= { cm10gtConfigEntry 14 }
cm10gtConfigPort1ChannelEnable OBJECT-TYPE
SYNTAX YesNoValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies whether channel number fine tuning is enabled
for this port. This object is read-only if the media module's
ConfigMode jumper is set to hardwareSwitches(0)."
::= { cm10gtConfigEntry 15 }
cm10gtConfigPort1ChannelNumber OBJECT-TYPE
SYNTAX INTEGER(1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the channel number fine tuning value for this
port. This object is read-only if the media converter module's
ConfigMode jumper is set to hardwareSwitches(0)."
::= { cm10gtConfigEntry 16 }
cm10gtConfigPort1TxDitherEnable OBJECT-TYPE
SYNTAX YesNoValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the whether TX Dither control is enabled on
this port. If not enabled the default TX Dither value will be used.
This object is read-only if the media module's ConfigMode jumper is
set to hardwareSwitches(0)."
::= { cm10gtConfigEntry 17 }
cm10gtConfigPort1TxDitherValue OBJECT-TYPE
SYNTAX EnableDisableValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the whether TX Dither is enabled for this
port. This object is read-only if the media module's ConfigMode
jumper is set to hardwareSwitches(0)."
::= { cm10gtConfigEntry 18 }
cm10gtConfigPort2Name OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..8))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies a user definable name for port 2."
::= { cm10gtConfigEntry 19 }
cm10gtConfigPort2Enable OBJECT-TYPE
SYNTAX YesNoValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies whether port 2 is enabled."
::= { cm10gtConfigEntry 20 }
cm10gtConfigPort2CopperDuplex OBJECT-TYPE
SYNTAX INTEGER {
half(1),
auto(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the duplex settings for the copper port."
::= { cm10gtConfigEntry 21 }
cm10gtConfigPort2CopperPauseEnh OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
symmetrical(1),
asymmetricalTx(2),
symmAsymRx(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the copper pause (flow control) setting that
is a advertised. The settings can be disabled, advertise symmetrical,
advertise asymmetrical TX or advertise symmetrical and asymmetrical
RX."
::= { cm10gtConfigEntry 22 }
cm10gtConfigPort2CopperEnergyEfficientEthernet OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the copper Energy-Efficient Ethernet setting for the media converter module
present in the chassis. "
::= { cm10gtConfigEntry 23 }
--
-- cm10gtConfigTable
--
--
-- cm10gtLedTable
--
cm10gtLedTable OBJECT-TYPE
SYNTAX SEQUENCE OF Cm10gtLedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of CM-10G type media converter module's LED status information."
::= { cm10gt 3 }
cm10gtLedEntry OBJECT-TYPE
SYNTAX Cm10gtLedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of the table, each relating to a separate CM-10G type
media converter module."
INDEX { mcrChassisIndex, cm10gtLedsSlotIndex }
::= { cm10gtLedTable 1 }
Cm10gtLedEntry ::=
SEQUENCE {
cm10gtLedsSlotIndex SlotNumber,
cm10gtLedPWR INTEGER,
cm10gtLedLK1 INTEGER,
cm10gtLedLK2 INTEGER
}
cm10gtLedsSlotIndex OBJECT-TYPE
SYNTAX SlotNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Slot number the CM-10G type module is currently inserted"
::= { cm10gtLedEntry 2 }
cm10gtLedPWR OBJECT-TYPE
SYNTAX INTEGER {
off(0),
onGreen(1),
blinking(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the status of the power (PWR) LED on the media converter module.
Possible status values are:
off(0) - No power to the module
onGreen(1) - Power being applied to module
blinking(2) - Loopback or Link-Test enabled"
::= { cm10gtLedEntry 3 }
cm10gtLedLK1 OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the status of the port 1 link (LK1) LED on the
media converter module.
Possible status values are:
off(0) - No link
on(1) - Port link present"
::= { cm10gtLedEntry 4 }
cm10gtLedLK2 OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the status of the port 2 link (LK2) LED on the
media converter module.
Possible status values are:
off(0) - No link
on(1) - Port link present"
::= { cm10gtLedEntry 5 }
--
-- end of cm10gtLedTable
--
-- cm4gpt - CM-4GPT media Converter type modules
--
cm4gpt OBJECT IDENTIFIER ::= { mcrModuleTypes 11 }
--
-- cm4gptTable
--
cm4gptTable OBJECT-TYPE
SYNTAX SEQUENCE OF Cm4gptEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of CM-4GPT type media converter module's status type information."
::= { cm4gpt 1 }
cm4gptEntry OBJECT-TYPE
SYNTAX Cm4gptEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of the table, each relating to a separate CM-4GPT type
media converter module."
INDEX { mcrChassisIndex, cm4gptSlotIndex }
::= { cm4gptTable 1 }
Cm4gptEntry ::=
SEQUENCE {
cm4gptSlotIndex SlotNumber,
cm4gptModelname DisplayString,
cm4gptModelDesc DisplayString,
cm4gptHwJmp5ConfigMode INTEGER,
cm4gptHwSw1LinkMode INTEGER,
cm4gptHwSw2FiberFaultAlert INTEGER,
cm4gptHwSw3RateSelect INTEGER,
cm4gptHwSw4Unused INTEGER,
cm4gptPort1LinkStatus INTEGER,
cm4gptPort1ConnType INTEGER,
cm4gptPort2LinkStatus INTEGER,
cm4gptPort2ConnType INTEGER
}
cm4gptSlotIndex OBJECT-TYPE
SYNTAX SlotNumber
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Slot number the CM-4GPT type module is currently inserted"
::= { cm4gptEntry 2 }
cm4gptModelname OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the model of media converter module present in the
chassis"
::= { cm4gptEntry 3 }
cm4gptModelDesc OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies a static description of the media converter module present
in the chassis"
::= { cm4gptEntry 4 }
cm4gptHwJmp5ConfigMode OBJECT-TYPE
SYNTAX INTEGER {
hardwareSwitches(0),
auto(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the media converter module's ConfigMode, set by hardware
jumper J5 on the media converter module. When this object is set to
hardwareSwitches(0), the media converter module will disable configuration
control from the management module's software and all configuration
control comes from the media converter module's hardware switches or jumpers. "
::= { cm4gptEntry 5 }
cm4gptHwSw1LinkMode OBJECT-TYPE
SYNTAX INTEGER {
swDownSmartLinkPassthrough(0),
swUpStandard(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current switch setting for Link Mode."
::= { cm4gptEntry 6 }
cm4gptHwSw2FiberFaultAlert OBJECT-TYPE
SYNTAX INTEGER {
swDownDisabled(0),
swUpEnabled(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current switch setting for Fiber Fault
Alert."
::= { cm4gptEntry 7 }
cm4gptHwSw3RateSelect OBJECT-TYPE
SYNTAX INTEGER {
swDownLow(0),
swUpHigh(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current switch setting for Rate Select."
::= { cm4gptEntry 8 }
cm4gptHwSw4Unused OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the current switch setting for the 4th, unused switch."
::= { cm4gptEntry 9 }
cm4gptPort1LinkStatus OBJECT-TYPE
SYNTAX INTEGER {
down(0),
up(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current fiber link status (port 1)."
::= { cm4gptEntry 10 }
cm4gptPort1ConnType OBJECT-TYPE
SYNTAX INTEGER {
sc(0),
lc(1),
st(2),
sfp(3),
fc(5),
mtrj(6),
xfp(7),
sfpPlus(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's fiber port connector type (port 1)."
::= { cm4gptEntry 11 }
cm4gptPort2LinkStatus OBJECT-TYPE
SYNTAX INTEGER {
down(0),
up(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's current fiber link status (port 2)."
::= { cm4gptEntry 12 }
cm4gptPort2ConnType OBJECT-TYPE
SYNTAX INTEGER {
sc(0),
lc(1),
st(2),
sfp(3),
fc(5),
mtrj(6),
xfp(7),
sfpPlus(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media converter module's fiber port connector type (port 2)."
::= { cm4gptEntry 13 }
--
-- cm4gptTable
--
--
-- cm4gptConfigTable
--
cm4gptConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF Cm4gptConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of CM-4GPT type media converter module's configuration type information."
::= { cm4gpt 2 }
cm4gptConfigEntry OBJECT-TYPE
SYNTAX Cm4gptConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of the table, each relating to a separate CM-4GPT type
media converter module."
INDEX { mcrChassisIndex, cm4gptConfigSlotIndex }
::= { cm4gptConfigTable 1 }
Cm4gptConfigEntry ::=
SEQUENCE {
cm4gptConfigSlotIndex SlotNumber,
cm4gptConfigStatus ContainerStatus,
cm4gptConfigModuleName DisplayString,
cm4gptConfigLinkMode INTEGER,
cm4gptConfigFiberFaultAlert EnableDisableValue,
cm4gptConfigRateSelect INTEGER,
cm4gptConfigPort1Name DisplayString,
cm4gptConfigPort1Enable YesNoValue,
cm4gptConfigPort2Name DisplayString,
cm4gptConfigPort2Enable YesNoValue
}
cm4gptConfigSlotIndex OBJECT-TYPE
SYNTAX SlotNumber
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Slot number the CM-4GPT type module is currently inserted"
::= { cm4gptConfigEntry 2 }
cm4gptConfigStatus OBJECT-TYPE
SYNTAX ContainerStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When you perform a GET on this variable, one of
the following values will be returned:
1-Indicates that the container folder is active with no changes.
2-Indicates that the container folder is active with change(s).
Once you have completed setting the variables in a folder, you
will want to submit your changes to the management module. To do
this, set the Status variable to 4. If you want to discard the
changes, set the Status variable to 6.
4-Indicates that the changes in the container folder are to be
submitted to the management module, verified and and saved to flash.
6-Indicates that the changes in the container folder are to be
discarded."
::= { cm4gptConfigEntry 3 }
cm4gptConfigModuleName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..63))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies a user configurable name for the media converter module
present in the chassis. "
::= { cm4gptConfigEntry 4 }
cm4gptConfigLinkMode OBJECT-TYPE
SYNTAX INTEGER {
standard(0),
smartLinkPassthrough(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the Link Mode for the media converter module. This object
is read-only if the media converter module's ConfigMode jumper is set to
hardwareSwitches(0)."
::= { cm4gptConfigEntry 5 }
cm4gptConfigFiberFaultAlert OBJECT-TYPE
SYNTAX EnableDisableValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the Fiber Fault Alert setting for the media
module. This object is read-only if the media converter module's ConfigMode
jumper is set to hardwareSwitches(0). "
::= { cm4gptConfigEntry 6 }
cm4gptConfigRateSelect OBJECT-TYPE
SYNTAX INTEGER {
low(0),
high(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the Rate Select setting for the media converter module. This object
is read-only if the media converter module's ConfigMode jumper is set to
hardwareSwitches(0)."
::= { cm4gptConfigEntry 7 }
cm4gptConfigPort1Name OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..8))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies a user definable name for port 1."
::= { cm4gptConfigEntry 8 }
cm4gptConfigPort1Enable OBJECT-TYPE
SYNTAX YesNoValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies whether port 1 is enabled."
::= { cm4gptConfigEntry 9 }
cm4gptConfigPort2Name OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..8))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies a user definable name for port 2."
::= { cm4gptConfigEntry 10 }
cm4gptConfigPort2Enable OBJECT-TYPE
SYNTAX YesNoValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies whether port 2 is enabled."
::= { cm4gptConfigEntry 11 }
--
-- cm4gptConfigTable
--
--
-- cm4gptLedTable
--
cm4gptLedTable OBJECT-TYPE
SYNTAX SEQUENCE OF Cm4gptLedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of CM-4GPT type media converter module's LED status information."
::= { cm4gpt 3 }
cm4gptLedEntry OBJECT-TYPE
SYNTAX Cm4gptLedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of the table, each relating to a separate CM-4GPT type
media converter module."
INDEX { mcrChassisIndex, cm4gptLedsSlotIndex }
::= { cm4gptLedTable 1 }
Cm4gptLedEntry ::=
SEQUENCE {
cm4gptLedsSlotIndex SlotNumber,
cm4gptLedPWR INTEGER,
cm4gptLedLK1 INTEGER,
cm4gptLedLK2 INTEGER
}
cm4gptLedsSlotIndex OBJECT-TYPE
SYNTAX SlotNumber
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Slot number the CM-4GPT type module is currently inserted"
::= { cm4gptLedEntry 2 }
cm4gptLedPWR OBJECT-TYPE
SYNTAX INTEGER {
off(0),
onGreen(1),
blinking(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the status of the power (PWR) LED on the media converter module.
Possible status values are:
off(0) - No power to the module
onGreen(1) - Power being applied to module
blinking(2) - Loopback or Link-Test enabled"
::= { cm4gptLedEntry 3 }
cm4gptLedLK1 OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the status of the port 1 link (LK1) LED on the
media converter module.
Possible status values are:
off(0) - No link
on(1) - Port link present"
::= { cm4gptLedEntry 4 }
cm4gptLedLK2 OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the status of the port 2 link (LK2) LED on the
media converter module.
Possible status values are:
off(0) - No link
on(1) - Port link present"
::= { cm4gptLedEntry 5 }
--
-- end of cm4gptLedTable
--
--
-- end of cm4gpt
--
-- end of mcrModuleTypes
--
--
-- mcrSfpDmiModuleTable
--
mcrSfpDmiModuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF McrSfpDmiModuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of SFP Diagnostic Monitoring Interface information for
Optical Transceivers"
::= { mcrChassisGroup 5 }
mcrSfpDmiModuleEntry OBJECT-TYPE
SYNTAX McrSfpDmiModuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of the table, each relating to a separate SFP module."
INDEX { mcrChassisIndex, sfpDmiSlotIndex, sfpDmiMediaPortIndex}
::= {mcrSfpDmiModuleTable 1 }
McrSfpDmiModuleEntry ::=
SEQUENCE {
sfpDmiSlotIndex SlotNumber,
sfpDmiMediaPortIndex Unsigned32,
sfpDmiStatus BITS,
sfpDmiConnectorType INTEGER,
sfpDmiNominalBitRate Unsigned32,
sfpDmiLinkReach9125 Integer32,
sfpDmiLinkReach50125 Integer32,
sfpDmiLinkReach625125 Integer32,
sfpDmiFiberWaveLength Unsigned32,
sfpDmiCurrentTempState INTEGER,
sfpDmiRealTimeTemp DisplayString,
sfpDmiHighTempWarn DisplayString,
sfpDmiHighTempAlarm DisplayString,
sfpDmiLowTempWarn DisplayString,
sfpDmiLowTempAlarm DisplayString,
sfpDmiCurrentVoltState INTEGER,
sfpDmiRealTimeVolt DisplayString,
sfpDmiHighVoltWarn DisplayString,
sfpDmiHighVoltAlarm DisplayString,
sfpDmiLowVoltWarn DisplayString,
sfpDmiLowVoltAlarm DisplayString,
sfpDmiCurrentTxBiasState INTEGER,
sfpDmiRealTimeTxBias DisplayString,
sfpDmiHighTxBiasWarn DisplayString,
sfpDmiHighTxBiasAlarm DisplayString,
sfpDmiLowTxBiasWarn DisplayString,
sfpDmiLowTxBiasAlarm DisplayString,
sfpDmiCurrentTxPowerState INTEGER,
sfpDmiRealTimeTxPower DisplayString,
sfpDmiHighTxPowerWarn DisplayString,
sfpDmiHighTxPowerAlarm DisplayString,
sfpDmiLowTxPowerWarn DisplayString,
sfpDmiLowTxPowerAlarm DisplayString,
sfpDmiCurrentRxPowerState INTEGER,
sfpDmiRealTimeRxPower DisplayString,
sfpDmiHighRxPowerWarn DisplayString,
sfpDmiHighRxPowerAlarm DisplayString,
sfpDmiLowRxPowerWarn DisplayString,
sfpDmiLowRxPowerAlarm DisplayString,
sfpDmiStatus2 Unsigned32,
sfpDmiVendorSerialNumber DisplayString,
sfpDmiVendorName DisplayString,
sfpDmiVendorPartNumber DisplayString,
xfpDmiAux1Type INTEGER,
xfpDmiAux1State INTEGER,
xfpDmiRealTimeAux1 DisplayString,
xfpDmiHighAux1Warn DisplayString,
xfpDmiHighAux1Alarm DisplayString,
xfpDmiLowAux1Warn DisplayString,
xfpDmiLowAux1Alarm DisplayString,
xfpDmiAux2Type INTEGER,
xfpDmiAux2State INTEGER,
xfpDmiRealTimeAux2 DisplayString,
xfpDmiHighAux2Warn DisplayString,
xfpDmiHighAux2Alarm DisplayString,
xfpDmiLowAux2Warn DisplayString,
xfpDmiLowAux2Alarm DisplayString,
xfpDmiMinBitRate Integer32,
xfpDmiMaxBitRate Integer32,
xfpDmiReachEBW50125 Integer32,
sfpDmiReachCopper Integer32
}
sfpDmiSlotIndex OBJECT-TYPE
SYNTAX SlotNumber
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Slot number of the media converter module containing this SFP/XFP"
::= { mcrSfpDmiModuleEntry 2 }
sfpDmiMediaPortIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Media converter module port index."
::= { mcrSfpDmiModuleEntry 3 }
sfpDmiStatus OBJECT-TYPE
SYNTAX BITS {
sfpModuleInserted(24),
sfpCommFailed(25),
sfpDmiSupported(26)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the status of the SFP module. If sfpCommFailed
bit is set then the rest of the data in this entry is invalid"
::= { mcrSfpDmiModuleEntry 4 }
sfpDmiConnectorType OBJECT-TYPE
SYNTAX INTEGER {
unknownUnspecified(0),
sc(1),
fiberChannelStyle1Copper(2),
fiberChannelStyle2Copper(3),
bncTnc(4),
fiberChannelCoaxHeader(5),
fiberJack(6),
lc(7),
mtrj(8),
mu(9),
sg(10),
opticalPigtail(11),
hssdcII(32),
copperPigtail(33)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the SFP DMI connector type."
::= { mcrSfpDmiModuleEntry 5 }
sfpDmiNominalBitRate OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the SFP DMI nominal bit rate of fiber
interface, in megabits per second."
::= { mcrSfpDmiModuleEntry 6 }
sfpDmiLinkReach9125 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the SFP DMI maximum length in meters of media
supported by the fiber transceiver for 9 micron (125 micron jacket)
single-mode fiber. "
::= { mcrSfpDmiModuleEntry 7 }
sfpDmiLinkReach50125 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the SFP DMI maximum length in meters of media
supported by the fiber transceiver for 50 micron (125 micron jacket)
multi-mode fiber."
::= { mcrSfpDmiModuleEntry 8 }
sfpDmiLinkReach625125 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the SFP DMI maximum length in meters of media
supported by the fiber transceiver for 62.5 micron (125 micron jacket)
multi-mode fiber."
::= { mcrSfpDmiModuleEntry 9 }
sfpDmiFiberWaveLength OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the wavelength of the fiber interface's
optical transceiver, in nanometers."
::= { mcrSfpDmiModuleEntry 10 }
sfpDmiCurrentTempState OBJECT-TYPE
SYNTAX INTEGER {
invalid(0),
notSupported(1),
normal(2),
highWarn(3),
highAlarm(4),
lowWarn(5),
lowAlarm(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the current alarm status for SFP DMI internally
measured temperature. "
::= { mcrSfpDmiModuleEntry 11 }
sfpDmiRealTimeTemp OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the SFP DMI real time temperature. The value
displayed will be either Celsius or Fahrenheit based on your
current regional display settings. "
::= { mcrSfpDmiModuleEntry 12 }
sfpDmiHighTempWarn OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the SFP DMI high temperature warning threshold.
The value displayed will be either Celsius or Fahrenheit based on your
current regional display settings. "
::= { mcrSfpDmiModuleEntry 13 }
sfpDmiHighTempAlarm OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the SFP DMI high temperature warning threshold.
The value displayed will be either Celsius or Fahrenheit based on your
current regional display settings. "
::= { mcrSfpDmiModuleEntry 14 }
sfpDmiLowTempWarn OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the SFP DMI high temperature warning threshold.
The value displayed will be either Celsius or Fahrenheit based on your
current regional display settings. "
::= { mcrSfpDmiModuleEntry 15 }
sfpDmiLowTempAlarm OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the SFP DMI high temperature warning threshold.
The value displayed will be either Celsius or Fahrenheit based on your
current regional display settings. "
::= { mcrSfpDmiModuleEntry 16 }
sfpDmiCurrentVoltState OBJECT-TYPE
SYNTAX INTEGER {
invalid(0),
notSupported(1),
normal(2),
highWarn(3),
highAlarm(4),
lowWarn(5),
lowAlarm(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies current alarm status for SFP DMI internally
measured voltage. "
::= { mcrSfpDmiModuleEntry 17 }
sfpDmiRealTimeVolt OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the SFP DMI real time voltage in Volts. "
::= { mcrSfpDmiModuleEntry 18 }
sfpDmiHighVoltWarn OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the SFP DMI high voltage warning threshold in
Volts "
::= { mcrSfpDmiModuleEntry 19 }
sfpDmiHighVoltAlarm OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the SFP DMI high voltage warning threshold in
Volts "
::= { mcrSfpDmiModuleEntry 20 }
sfpDmiLowVoltWarn OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the SFP DMI high voltage warning threshold in
Volts"
::= { mcrSfpDmiModuleEntry 21 }
sfpDmiLowVoltAlarm OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the SFP DMI high voltage warning threshold in
Volts"
::= { mcrSfpDmiModuleEntry 22 }
sfpDmiCurrentTxBiasState OBJECT-TYPE
SYNTAX INTEGER {
invalid(0),
notSupported(1),
normal(2),
highWarn(3),
highAlarm(4),
lowWarn(5),
lowAlarm(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies current alarm status for SFP DMI internally
measured transmit bias current in milliamps. "
::= { mcrSfpDmiModuleEntry 23 }
sfpDmiRealTimeTxBias OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the SFP DMI high TX Bias current in milliamps. "
::= { mcrSfpDmiModuleEntry 24 }
sfpDmiHighTxBiasWarn OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the SFP DMI high TX Bias current warning
threshold in milliamps."
::= { mcrSfpDmiModuleEntry 25 }
sfpDmiHighTxBiasAlarm OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the SFP DMI high TX Bias current alarm
threshold in milliamps."
::= { mcrSfpDmiModuleEntry 26 }
sfpDmiLowTxBiasWarn OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the SFP DMI low TX Bias current warning
threshold in milliamps."
::= { mcrSfpDmiModuleEntry 27 }
sfpDmiLowTxBiasAlarm OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the SFP DMI low TX Bias current alarm
threshold in milliamps."
::= { mcrSfpDmiModuleEntry 28 }
sfpDmiCurrentTxPowerState OBJECT-TYPE
SYNTAX INTEGER {
invalid(0),
notSupported(1),
normal(2),
highWarn(3),
highAlarm(4),
lowWarn(5),
lowAlarm(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies current alarm status for SFP DMI internally
measured transmit power. "
::= { mcrSfpDmiModuleEntry 29 }
sfpDmiRealTimeTxPower OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the SFP DMI real time TX output power.
The value displayed will be either millwatts or Dbm based on your
current regional display settings. "
::= { mcrSfpDmiModuleEntry 30 }
sfpDmiHighTxPowerWarn OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the SFP DMI high TX output power warning
threshold. The value displayed will be either millwatts or Dbm based
on your current regional display settings. "
::= { mcrSfpDmiModuleEntry 31 }
sfpDmiHighTxPowerAlarm OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the SFP DMI high TX output power alarm
threshold. The value displayed will be either millwatts or Dbm based
on your current regional display settings. "
::= { mcrSfpDmiModuleEntry 32 }
sfpDmiLowTxPowerWarn OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the SFP DMI low TX output power warning
threshold. The value displayed will be either millwatts or Dbm based
on your current regional display settings. "
::= { mcrSfpDmiModuleEntry 33 }
sfpDmiLowTxPowerAlarm OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the SFP DMI low TX output power alarm
threshold. The value displayed will be either millwatts or Dbm based
on your current regional display settings. "
::= { mcrSfpDmiModuleEntry 34 }
sfpDmiCurrentRxPowerState OBJECT-TYPE
SYNTAX INTEGER {
invalid(0),
notSupported(1),
normal(2),
highWarn(3),
highAlarm(4),
lowWarn(5),
lowAlarm(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies current alarm status for SFP DMI internally
measured receive power. "
::= { mcrSfpDmiModuleEntry 35 }
sfpDmiRealTimeRxPower OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the SFP DMI real time RX received optical power.
The value displayed will be either millwatts or Dbm based
on your current regional display settings. "
::= { mcrSfpDmiModuleEntry 36 }
sfpDmiHighRxPowerWarn OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the SFP DMI high RX received optical warning
threshold. The value displayed will be either millwatts or Dbm based
on your current regional display settings. "
::= { mcrSfpDmiModuleEntry 37 }
sfpDmiHighRxPowerAlarm OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the SFP DMI high RX received optical alarm
threshold. The value displayed will be either millwatts or Dbm based
on your current regional display settings. "
::= { mcrSfpDmiModuleEntry 38 }
sfpDmiLowRxPowerWarn OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the SFP DMI low RX received optical warning
threshold. The value displayed will be either millwatts or Dbm based
on your current regional display settings. "
::= { mcrSfpDmiModuleEntry 39 }
sfpDmiLowRxPowerAlarm OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the SFP DMI low RX received optical alarm
threshold. The value displayed will be either millwatts or Dbm based
on your current regional display settings. "
::= { mcrSfpDmiModuleEntry 40 }
sfpDmiStatus2 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the status of the SFP module. If sfpCommFailed
value is set then the rest of the data in this entry is invalid
0x80 - sfpModuleInserted
0x40 - sfpCommFailed
0x20 - sfpDmiSupported"
::= { mcrSfpDmiModuleEntry 41 }
sfpDmiVendorSerialNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the SFP DMI serial number. "
::= { mcrSfpDmiModuleEntry 42 }
sfpDmiVendorName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the SFP DMI serial number. "
::= { mcrSfpDmiModuleEntry 43 }
sfpDmiVendorPartNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the SFP DMI serial number. "
::= { mcrSfpDmiModuleEntry 44 }
xfpDmiAux1Type OBJECT-TYPE
SYNTAX INTEGER {
notSupported(0),
apdBiasVoltmv(1),
tecCurrentma(3),
laserTemperature(4),
laserWavelength(5),
p5Voltv(6),
p33Voltv(7),
p18Voltv(8),
m52Voltv(9),
p5vCurrentma(10),
p33vCurrentma(13),
p18vCurrentma(14),
m52vCurrentma(15)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the type of value that is being measured by
the Auxillary 1 registers on the XFP"
::= { mcrSfpDmiModuleEntry 45 }
xfpDmiAux1State OBJECT-TYPE
SYNTAX INTEGER {
invalid(0),
notSupported(1),
normal(2),
highWarn(3),
highAlarm(4),
lowWarn(5),
lowAlarm(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies current alarm status for the XFP Aux1 registers"
::= { mcrSfpDmiModuleEntry 46 }
xfpDmiRealTimeAux1 OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the XFP DMI real time values for the Aux1
registers"
::= { mcrSfpDmiModuleEntry 47 }
xfpDmiHighAux1Warn OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the XFP DMI high warning threshold for Aux1"
::= { mcrSfpDmiModuleEntry 48 }
xfpDmiHighAux1Alarm OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the XFP DMI alarm alarm threshold for Aux1"
::= { mcrSfpDmiModuleEntry 49 }
xfpDmiLowAux1Warn OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the XFP DMI low warning threshold for Aux1"
::= { mcrSfpDmiModuleEntry 50 }
xfpDmiLowAux1Alarm OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the XFP DMI low alarm threshold for Aux1"
::= { mcrSfpDmiModuleEntry 51 }
xfpDmiAux2Type OBJECT-TYPE
SYNTAX INTEGER {
notSupported(0),
apdBiasVoltmv(1),
tecCurrentma(3),
laserTemperature(4),
laserWavelength(5),
p5Voltv(6),
p33Voltv(7),
p18Voltv(8),
m52Voltv(9),
p5vCurrentma(10),
p33vCurrentma(13),
p18vCurrentma(14),
m52vCurrentma(15)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the type of value that is being measured by
the Auxillary 1 registers on the XFP"
::= { mcrSfpDmiModuleEntry 52 }
xfpDmiAux2State OBJECT-TYPE
SYNTAX INTEGER {
invalid(0),
notSupported(1),
normal(2),
highWarn(3),
highAlarm(4),
lowWarn(5),
lowAlarm(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies current alarm status for the XFP Aux2 registers"
::= { mcrSfpDmiModuleEntry 53 }
xfpDmiRealTimeAux2 OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the SFP DMI real time values for the Aux2
registers"
::= { mcrSfpDmiModuleEntry 54 }
xfpDmiHighAux2Warn OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the XFP DMI high warning threshold for Aux2"
::= { mcrSfpDmiModuleEntry 55 }
xfpDmiHighAux2Alarm OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the XFP DMI alarm alarm threshold for Aux2"
::= { mcrSfpDmiModuleEntry 56 }
xfpDmiLowAux2Warn OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the XFP DMI low warning threshold for Aux2"
::= { mcrSfpDmiModuleEntry 57 }
xfpDmiLowAux2Alarm OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the XFP DMI low alarm threshold for Aux2"
::= { mcrSfpDmiModuleEntry 58 }
xfpDmiMinBitRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the XFP minimum bit rate."
::= { mcrSfpDmiModuleEntry 59 }
xfpDmiMaxBitRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the XFP maximum bit rate."
::= { mcrSfpDmiModuleEntry 60 }
xfpDmiReachEBW50125 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the link length that is supported by the fiber
transceiver using extended bandwidth 50 micron core (125 micron jacket)
multimode fiber"
::= { mcrSfpDmiModuleEntry 61 }
sfpDmiReachCopper OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the maximum length in meters that is
supported by the SFP/XFP interface using copper cable."
::= { mcrSfpDmiModuleEntry 62 }
--
-- end of mcrSfpDmiModuleTable
--
--
-- mcrAlarmsWarningsTable
--
mcrAlarmsWarningsTable OBJECT-TYPE
SYNTAX SEQUENCE OF McrAlarmsWarningsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of outstanding alarms and warnings."
::= { mcrChassisGroup 6 }
mcrAlarmsWarningsEntry OBJECT-TYPE
SYNTAX McrAlarmsWarningsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of the table, each relating to a separate alarm or warning."
INDEX { mcrChassisIndex, alarmWarnSequenceIndex }
::= { mcrAlarmsWarningsTable 1 }
McrAlarmsWarningsEntry ::=
SEQUENCE {
alarmWarnSequenceIndex Unsigned32,
alarmWarnType Unsigned32,
alarmWarnSeverity Unsigned32,
alarmWarnFlags Unsigned32,
alarmWarnChassisNum Unsigned32,
alarmWarnDeviceNum Unsigned32,
alarmWarnTimeStamp TimeTicks,
alarmWarnMessage DisplayString,
alarmWarnPortNum Unsigned32
}
alarmWarnSequenceIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies the sequence in which the alarms or
warnings were generated. Gaps in the sequence numbers are normal."
::= { mcrAlarmsWarningsEntry 2 }
alarmWarnType OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the alert/Trap number associated with
this alarm/warning."
::= { mcrAlarmsWarningsEntry 3 }
alarmWarnSeverity OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the severity level of the alarm/warning.
Value will be one of the top three levels."
::= { mcrAlarmsWarningsEntry 4 }
alarmWarnFlags OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the flags defining the alarm/warning.
0x00000002 - chassis type alert
0x00000004 - Power Supply Monitoring Unit type alert
0x00000008 - PSMU power supply type alert
0x00000010 - PSMU fan type alert
0x00000020 - Management module type alert
0x00000040 - Media converter module type alert
0x00000080 - Media converter module SFP module type alert."
::= { mcrAlarmsWarningsEntry 5 }
alarmWarnChassisNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the chassis number associated with this
alarm/warning."
::= { mcrAlarmsWarningsEntry 6 }
alarmWarnDeviceNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the Hardware slot/bay location of the
hardware associated with this alarm or warning.
- 0 indicates alarm/warning occurred on the chassis backplane.
- If AlarmWarnFlags indicates a power supply then this value
the power supply bay number.
- Otherwise it is the chassis slot number."
::= { mcrAlarmsWarningsEntry 7 }
alarmWarnTimeStamp OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the time stamp of when the alarm/warning
was reported. (in seconds since the Epoch, defined as 0:00:00 UTC
on the morning of January 1, 1970), that the alert was reported
on the MCR-MGT.)"
::= { mcrAlarmsWarningsEntry 8 }
alarmWarnMessage OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the alarm/warning message string
which will contain any values of bound variables."
::= { mcrAlarmsWarningsEntry 9 }
alarmWarnPortNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the location of the media
port associated with this alarm or warning."
::= { mcrAlarmsWarningsEntry 10 }
--
-- end of mcrAlarmsWarningsTable
--
--
-- mcrMediaPortTable
--
mcrMediaPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF McrMediaPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of general port status information."
::= { mcrChassisGroup 7 }
mcrMediaPortEntry OBJECT-TYPE
SYNTAX McrMediaPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of the table, each relating to a separate media converter module port."
INDEX { mcrChassisIndex, mediaPortSlotIndex, mediaPortPortIndex }
::= { mcrMediaPortTable 1 }
McrMediaPortEntry ::=
SEQUENCE {
mediaPortSlotIndex Unsigned32,
mediaPortPortIndex Unsigned32,
moduleModel DisplayString,
portName DisplayString,
portEnable INTEGER,
portType INTEGER,
portLinkStatus INTEGER,
portConnType INTEGER,
portAutoNegState INTEGER,
portSpeed INTEGER,
portDuplex INTEGER,
portPause INTEGER,
portRemoteStatus INTEGER,
portMediaType INTEGER,
portPhysicalProtocol INTEGER
}
mediaPortSlotIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Slot number for the media converter module containing this port."
::= { mcrMediaPortEntry 2 }
mediaPortPortIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Port number on media card. Valid values are 1 to the highest number
of ports available on a media card. There are usually two ports"
::= { mcrMediaPortEntry 3 }
moduleModel OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the model name of the module containing
this port."
::= { mcrMediaPortEntry 4 }
portName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the name configured for this port."
::= { mcrMediaPortEntry 5 }
portEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enable(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates whether the port has been enabled."
::= { mcrMediaPortEntry 6 }
portType OBJECT-TYPE
SYNTAX INTEGER {
copper(0),
fiber(1),
sfp(2),
xfp(3),
sfpPlus(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of port (copper, fiber, etc.) ."
::= { mcrMediaPortEntry 7}
portLinkStatus OBJECT-TYPE
SYNTAX INTEGER {
down(0),
up(1),
shutdown(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port's current link status."
::= { mcrMediaPortEntry 8}
portConnType OBJECT-TYPE
SYNTAX INTEGER {
rj45(0),
sc(1),
lc(2),
st(3),
sfp(4),
fc(5),
mtrj(6),
xfp(7),
sfpPlus(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port's connector type"
::= { mcrMediaPortEntry 9 }
portAutoNegState OBJECT-TYPE
SYNTAX INTEGER {
notApplicable(-1),
disabled(0),
complete(1),
inProgress(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port's auto-negotiation state"
::= { mcrMediaPortEntry 10 }
portSpeed OBJECT-TYPE
SYNTAX INTEGER {
notApplicable(-1),
speed10Mbs(0),
speed100Mbps(1),
speed1000Mbps(2),
speed10Gbps(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the port auto-negotiation state is complete then this object
indicates the ports current auto-negotiated speed setting.
If auto-negotiation is not complete then the value returned
should be ignored"
::= { mcrMediaPortEntry 11 }
portDuplex OBJECT-TYPE
SYNTAX INTEGER {
notApplicable(-1),
half(0),
full(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If port auto-negotiation state is complete then this object
indicates the media converter module's current auto-negotiated duplex
setting for this port. If auto-negotiation is not complete then the
value returned should be ignored."
::= { mcrMediaPortEntry 12 }
portPause OBJECT-TYPE
SYNTAX INTEGER {
notApplicable(-1),
disabled(0),
symmetrical(1),
asymmetricalTx(2),
asymmetricalRx(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If port auto-negotiation state is complete then this object indicates
the media converter module's current auto-negotiated pause setting for this
port. If auto-negotiation is not complete then the value returned
should be ignored."
::= { mcrMediaPortEntry 13 }
portRemoteStatus OBJECT-TYPE
SYNTAX INTEGER {
notApplicable(-1),
ok(0),
remoteFault(1),
offline(2),
linkFault(3),
autoNegError(4),
disable(5),
receivingFEF(6),
sendingFEF(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This port's Link Partner Remote Fault status or Far End Fault status"
::= { mcrMediaPortEntry 14 }
portMediaType OBJECT-TYPE
SYNTAX INTEGER {
unknown(-1),
copper(0),
fiber(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of port (copper, fiber, etc.) ."
::= { mcrMediaPortEntry 15}
portPhysicalProtocol OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
ethernet(1),
vdsl(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The physical networking protocol used by the port."
::= { mcrMediaPortEntry 16}
--
-- end of mcrMediaPortTable
--
--
-- end of mcrChassisGroup
--
--
-- mcrManagementGroup
--
mgtNetworkGroup OBJECT IDENTIFIER ::= { mcrManagementGroup 1 }
mgtAccessGroup OBJECT IDENTIFIER ::= { mcrManagementGroup 2 }
mgtAlertGroup OBJECT IDENTIFIER ::= { mcrManagementGroup 3 }
mgtUsersGroup OBJECT IDENTIFIER ::= { mcrManagementGroup 4 }
mgtDateTimeGroup OBJECT IDENTIFIER ::= { mcrManagementGroup 5 }
mgtFilesGroup OBJECT IDENTIFIER ::= { mcrManagementGroup 6 }
mgtAdminGroup OBJECT IDENTIFIER ::= { mcrManagementGroup 7 }
mgtDisplayFormatGroup OBJECT IDENTIFIER ::= { mcrManagementGroup 8 }
mgtChassisCfgGroup OBJECT IDENTIFIER ::= { mcrManagementGroup 9 }
--
-- mgtNetworkGroup
--
--
-- systemGroup.
--
systemGroup OBJECT IDENTIFIER ::= { mgtNetworkGroup 1 }
systemStatus OBJECT-TYPE
SYNTAX ContainerStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When you perform a GET on this variable, one of
the following values will be returned:
1-Indicates that the container folder is active with no changes.
2-Indicates that the container folder is active with change(s).
Once you have completed setting the variables in a folder, you
will want to submit your changes to the management module. To do
this, set the Status variable to 4. If you want to discard the
changes, set the Status variable to 6.
4-Indicates that the changes in the container folder are to be
submitted to the management module.
6-Indicates that the changes in the container folder are to be
discarded."
::= { systemGroup 1 }
systemName OBJECT-TYPE
SYNTAX DisplayString(SIZE(1..63))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The name of the system management module."
::= { systemGroup 2 }
systemDomainName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The domain name of the management module."
::= { systemGroup 3 }
systemIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The management module's unique IPv4 network IP address.
If you are using the management module in an IPv6 network,
this field can be left blank."
::= { systemGroup 4 }
systemSubnetBits OBJECT-TYPE
SYNTAX Integer32(0..32)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of bits in the subnet mask. For example, a subnet mask
of 255.255.0.0 has 16 subnet/prefix bits. Valid values are 0-32.
The default is 0. When the value is 0, the correct value is determined
based on the class of the IP Address."
::= { systemGroup 5 }
systemDHCPUpdateDNS OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If enabled, the DNS system will be updated after the management module
gets the IP address via DHCP."
::= { systemGroup 6 }
systemAutoObtainDNS OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If on, the DNS server IP address will be obtained automatically
automatically via DHCP."
::= { systemGroup 7 }
systemAutoObtainGW OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If enabled, the default gateway IP address will be get automatically via DHCP."
::= { systemGroup 8 }
systemDomainPrefix OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..7))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The domain prefix for primary Ethernet interface of the management module."
::= { systemGroup 9 }
systemTFTPRetry OBJECT-TYPE
SYNTAX Integer32(0..5)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of times the management module will attempt to
transfer (using TFTP) a file to/from a host. Default is 5.
A value of 0 (zero) means that the management module will not
attempt a retry should TFTP fail."
::= { systemGroup 10 }
systemTFTPTimeOut OBJECT-TYPE
SYNTAX Integer32(3..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The time, in seconds, that the management module will wait for
a successful transmit or receipt of TFTP packets before retrying
a TFTP transfer. Default is 3 seconds."
::= { systemGroup 11 }
--
-- end of systemGroup
--
--
--
-- gatewayTable
--
gatewayTable OBJECT-TYPE
SYNTAX SEQUENCE OF GatewayEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of configured gateway."
::= { mgtNetworkGroup 2}
gatewayEntry OBJECT-TYPE
SYNTAX GatewayEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of the table, each relating to a separate configured gateway. "
INDEX { gatewayIndex }
::= { gatewayTable 1 }
GatewayEntry ::=
SEQUENCE {
gatewayIndex GenericTableIndex,
gatewayStatus ContainerStatus,
gatewayHost DisplayString,
gatewayType INTEGER,
gatewayIpAddress Ipv4v6Address,
gatewaySubnetBits Integer32,
gatewayInterface DisplayString
}
gatewayIndex OBJECT-TYPE
SYNTAX GenericTableIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"gatewayIndex"
::= { gatewayEntry 1}
gatewayStatus OBJECT-TYPE
SYNTAX ContainerStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When you perform a GET on this variable, one of
the following values will be returned:
1-Indicates that the container folder is active with no changes.
2-Indicates that the container folder is active with change(s).
Once you have completed setting the variables in a folder, you
will want to submit your changes to the management module. To do
this, set the Status variable to 4. If you want to discard the
changes, set the Status variable to 6.
4-Indicates that the changes in the container folder are to be
submitted to the management module and verified. To save the
changes to flash a write of writeToFlash(1) in the adminFunction
object is required.
6-Indicates that the changes in the container folder are to be
discarded."
::= { gatewayEntry 2}
gatewayHost OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..14))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"You can specify up to twenty hosts to act as gateways
in your network. Each gateway host must be defined in
the management module host table."
::= { gatewayEntry 3}
gatewayType OBJECT-TYPE
SYNTAX INTEGER {
host(0),
network(1),
default(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify the type of gateway:
Default-A gateway which provides general access beyond
your local network.
Host-A gateway reserved for accessing a specific host
external to your local network.
Network-A gateway reserved for accessing a specific
network external to your local network."
::= { gatewayEntry 4}
gatewayIpAddress OBJECT-TYPE
SYNTAX Ipv4v6Address
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When the gateway is a Host or Network gateway, you must
specify the IP address of the target host machine/network."
::= { gatewayEntry 5}
gatewaySubnetBits OBJECT-TYPE
SYNTAX Integer32(0..128)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When the gateway is a Network gateway, you must specify the
subnet/prefix bits for that network. If the IP address is IPv4,
then the Subnet/Prefix Bits range is 0-32. If the IP address
is IPv6, then the Subnet/Prefix Bits range is 0-128."
::= { gatewayEntry 6}
gatewayInterface OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The interface that the management module is going to use to access the
Remote Host."
::= { gatewayEntry 7}
--
-- end of gatewayTable
--
-- hostTable
--
hostTable OBJECT-TYPE
SYNTAX SEQUENCE OF HostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The hosts Group table."
::= { mgtNetworkGroup 3 }
hostEntry OBJECT-TYPE
SYNTAX HostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the host table, each relating to a separate host."
INDEX { hostIndex }
::= { hostTable 1 }
HostEntry ::=
SEQUENCE {
hostIndex GenericTableIndex,
hostStatus ContainerStatus,
hostName DisplayString,
hostIpAddr Ipv4v6Address,
hostFqdn DisplayString
}
hostIndex OBJECT-TYPE
SYNTAX GenericTableIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table entry number for this host."
::= { hostEntry 1 }
hostStatus OBJECT-TYPE
SYNTAX ContainerStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When you perform a GET on this variable, one of
the following values will be returned:
1-Indicates that the container folder is active with no changes.
2-Indicates that the container folder is active with change(s).
Once you have completed setting the variables in a folder, you
will want to submit your changes to the management module. To do
this, set the Status variable to 4. If you want to discard the
changes, set the Status variable to 6.
4-Indicates that the changes in the container folder are to be
submitted to the management module and verified. To save the
changes to flash a write of writeToFlash(1) in the adminFunction
object is required.
6-Indicates that the changes in the container folder are to be
discarded."
::= { hostEntry 2 }
hostName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..14))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The host name used for this host entry.
To delete an entry, blank out this field.
If blank, this entry is currently unused."
::= { hostEntry 3 }
hostIpAddr OBJECT-TYPE
SYNTAX Ipv4v6Address
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The host IP address used for this entry."
::= { hostEntry 4 }
hostFqdn OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The host full qualified domain name for the host entry.
If blank, this entry is currently unused."
::= { hostEntry 5 }
--
-- end of hostTable
--
--
-- dnsTable
--
dnsTable OBJECT-TYPE
SYNTAX SEQUENCE OF DnsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of DNS hosts"
::= { mgtNetworkGroup 4 }
dnsEntry OBJECT-TYPE
SYNTAX DnsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of the table, each relating to a separate DNS host."
INDEX { dnsIndex }
::= { dnsTable 1 }
DnsEntry ::=
SEQUENCE {
dnsIndex GenericTableIndex,
dnsStatus ContainerStatus,
dnsIpAddress Ipv4v6Address,
dnsActive OnOffValue
}
dnsIndex OBJECT-TYPE
SYNTAX GenericTableIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"DNS host index "
::= { dnsEntry 1}
dnsStatus OBJECT-TYPE
SYNTAX ContainerStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When you perform a GET on this variable, one of
the following values will be returned:
1-Indicates that the container folder is active with no changes.
2-Indicates that the container folder is active with change(s).
Once you have completed setting the variables in a folder, you
will want to submit your changes to the management module. To do
this, set the Status variable to 4. If you want to discard the
changes, set the Status variable to 6.
4-Indicates that the changes in the container folder are to be
submitted to the management module and verified. To save the
changes to flash a write of writeToFlash(1) in the adminFunction
object is required.
6-Indicates that the changes in the container folder are to be
discarded."
::= { dnsEntry 2 }
dnsIpAddress OBJECT-TYPE
SYNTAX Ipv4v6Address
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"You can specify the IP addresses for up to two DNS
(Domain Name Servers) hosts in your network. The first
DNS entry in the list is the primary DNS and the second
DNS entry is the secondary server."
::= { dnsEntry 3}
dnsActive OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Activates/deactivates a DNS entry."
::= { dnsEntry 4}
--
-- end of dnsTable
--
--
-- dynamicDNSGroup
--
dynamicDNSGroup OBJECT IDENTIFIER ::= { mgtNetworkGroup 5 }
dynamicDNSStatus OBJECT-TYPE
SYNTAX ContainerStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When you perform a GET on this variable, one of
the following values will be returned:
1-Indicates that the container folder is active with no changes.
2-Indicates that the container folder is active with change(s).
Once you have completed setting the variables in a folder, you
will want to submit your changes to the management module. To do
this, set the Status variable to 4. If you want to discard the
changes, set the Status variable to 6.
4-Indicates that the changes in the container folder are to be
submitted to the management module and verified. To save the
changes to flash a write of writeToFlash(1) in the adminFunction
object is required.
6-Indicates that the changes in the container folder are to be
discarded."
::= {dynamicDNSGroup 1}
dynamicDNS OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/disable dynamic DNS."
::= { dynamicDNSGroup 2}
dynamicDNSHostname OBJECT-TYPE
SYNTAX DisplayString(SIZE(1..14))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Host name."
::= { dynamicDNSGroup 3}
dynamicDNSUserName OBJECT-TYPE
SYNTAX DisplayString(SIZE(1..16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"User name."
::= { dynamicDNSGroup 4}
dynamicDNSPassword OBJECT-TYPE
SYNTAX DisplayString(SIZE(1..16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the dynamic DNS password. Reading of this object will
always return a blank string"
::= { dynamicDNSGroup 5}
dynamicDNSSystemType OBJECT-TYPE
SYNTAX INTEGER {
dynamic(0),
static(1),
custom(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"System type."
::= { dynamicDNSGroup 6}
dynamicDNSWildCard OBJECT-TYPE
SYNTAX INTEGER {
enable(0),
disable(1),
nochange(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies whether to add a alias such as * to your registered host name."
::= { dynamicDNSGroup 7}
dynamicDNSConnectionMethod OBJECT-TYPE
SYNTAX INTEGER {
http(0),
httpport8245(1),
https(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies how the management module is going to connection to the
DynDNS.org server."
::= { dynamicDNSGroup 8}
dynamicDNSSSLVerifyPeerCertificate OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable this option when you want the Validation Criteria
to match the Peer Certificate for authentication to pass.
If you enable this option, you need to download an
SSL/TLS certificate authority (CA) list file to the
management module. Any values that are entered in the validation
criteria must match the peer certificate for an SSL connection;
any fields left blank will not be validated against the peer
certificate."
::= {dynamicDNSGroup 9}
dynamicDNSSSLCountry OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..2))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A two character country code; for example, US."
::= {dynamicDNSGroup 10}
dynamicDNSSSLStateProv OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Up to a 128 character entry for the state/province;
for example, IL."
::= {dynamicDNSGroup 11}
dynamicDNSSSLLocality OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Up to a 128 character entry for the location;
for example, a city."
::= {dynamicDNSGroup 12}
dynamicDNSSSLOrganisation OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Up to a 64 character entry for the organization;
for example, Accounting."
::= {dynamicDNSGroup 13}
dynamicDNSSSLOrganisationUnit OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Up to a 64 character entry for the unit in the
organization; for example, Payroll."
::= {dynamicDNSGroup 14}
dynamicDNSSSLCommonName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Up to a 64 character entry for common name; for example,
the host name or fully qualified domain name."
::= {dynamicDNSGroup 15}
dynamicDNSSSLEmail OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Up to a 64 character entry for an email address;
for example, acct@anycompany.com."
::= {dynamicDNSGroup 16}
dynamicDNSStatusString OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..1024))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Dynamic DNS statistics"
::= {dynamicDNSGroup 17}
--
-- dynamicDNSSSLCipherTable
--
dynamicDNSSSLCipherTable OBJECT-TYPE
SYNTAX SEQUENCE OF DynamicDNSSSLCipherEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"SSL Cipher."
::= {dynamicDNSGroup 18}
dynamicDNSSSLCipherEntry OBJECT-TYPE
SYNTAX DynamicDNSSSLCipherEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the dynamicDNSSSLCipherTable, each relating to a cipher entry."
INDEX { dynamicDNSSSLCipherPriority }
::= { dynamicDNSSSLCipherTable 1 }
DynamicDNSSSLCipherEntry ::=
SEQUENCE {
dynamicDNSSSLCipherPriority Integer32,
dynamicDNSSSLCipherStatus ContainerStatus,
dynamicDNSSSLCipherEncryption INTEGER,
dynamicDNSSSLCipherKeySizeMin INTEGER,
dynamicDNSSSLCipherKeySizeMax INTEGER,
dynamicDNSSSLCipherKeyExchange INTEGER,
dynamicDNSSSLCipherHMAC INTEGER
}
dynamicDNSSSLCipherPriority OBJECT-TYPE
SYNTAX Integer32(1..5)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The cipher priority. 1- highest 5 - lowest."
::= { dynamicDNSSSLCipherEntry 1 }
dynamicDNSSSLCipherStatus OBJECT-TYPE
SYNTAX ContainerStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When you perform a GET on this variable, one of
the following values will be returned:
1-Indicates that the container folder is active with no changes.
2-Indicates that the container folder is active with change(s).
Once you have completed setting the variables in a folder, you
will want to submit your changes to the management module. To do
this, set the Status variable to 4. If you want to discard the
changes, set the Status variable to 6.
4-Indicates that the changes in the container folder are to be
submitted to the management module and verified. To save the
changes to flash a write of writeToFlash(1) in the adminFunction
object is required.
6-Indicates that the changes in the container folder are to be
discarded."
::= { dynamicDNSSSLCipherEntry 2 }
dynamicDNSSSLCipherEncryption OBJECT-TYPE
SYNTAX INTEGER {
none(0),
any(1),
aes(2),
tripledes(3),
des(4),
arctwo(5),
arcfour(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SSL Encryption. None is not allowed for priority 1.
Any will use the first encryption format that can be
negotiated. The default is any."
::= { dynamicDNSSSLCipherEntry 3 }
dynamicDNSSSLCipherKeySizeMin OBJECT-TYPE
SYNTAX INTEGER {
min40(0),
min56(1),
min64(2),
min128(3),
min168(4),
min256(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The minimum key size value that will be used for
the specified encryption type. The default is 40."
::= { dynamicDNSSSLCipherEntry 4 }
dynamicDNSSSLCipherKeySizeMax OBJECT-TYPE
SYNTAX INTEGER {
max40(0),
max56(1),
max64(2),
max128(3),
max168(4),
max256(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum key size value that will be used for the
specified encryption type. The default is 256."
::= { dynamicDNSSSLCipherEntry 5 }
dynamicDNSSSLCipherKeyExchange OBJECT-TYPE
SYNTAX INTEGER {
any(0),
rsa(1),
edhrsa(2),
edhdss(3),
adh(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of key to exchange for the encryption format:
Any-Any key exchange that is valid is used (this does
not, however, include ADH keys).
RSA-This is an RSA key exchange using an RSA key and
certificate.
EDHRSA-This is an EDH key exchange using an RSA key
and certificate.
EDHDSS-This is an EDH key exchange using a DSA key
and certificate.
ADH-This is an anonymous key exchange which does not
require a private key or certificate. Choose this
key if you do not want to authenticate the peer device,
but you want the data encrypted on the SSL/TLS connection.
The default is Any."
::= { dynamicDNSSSLCipherEntry 6 }
dynamicDNSSSLCipherHMAC OBJECT-TYPE
SYNTAX INTEGER {
any(0),
sha(1),
md5(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Select the key-hashing for message authentication method
for your encryption type: Any, MD5, or SHA1.
The default is Any."
::= { dynamicDNSSSLCipherEntry 7 }
--
-- end of dynamicDNSSSLCipherTable
--
--
-- end of dynamicDNSGroup
--
--
-- ipv6Group
--
ipv6Group OBJECT IDENTIFIER ::= { mgtNetworkGroup 6 }
--
-- ipv6ServicesGroup
--
ipv6ServicesGroup OBJECT IDENTIFIER ::= { ipv6Group 1 }
ipv6serviceStatus OBJECT-TYPE
SYNTAX ContainerStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When you perform a GET on this variable, one of
the following values will be returned:
1-Indicates that the container folder is active with no changes.
2-Indicates that the container folder is active with change(s).
Once you have completed setting the variables in a folder, you
will want to submit your changes to the management module. To do
this, set the Status variable to 4. If you want to discard the
changes, set the Status variable to 6.
4-Indicates that the changes in the container folder are to be
submitted to the management module and verified. To save the
changes to flash a write of writeToFlash(1) in the adminFunction
object is required.
6-Indicates that the changes in the container folder are to be
discarded."
::= {ipv6ServicesGroup 1}
serviceAutoDiscovery OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When on, the management module will send out a Router Solicitation
message. If a Router Advertisement message is received, the
management module will configure the IPv6 address(es) and configuration
parameters based on the information contained in the advertisement.
If no Router Advertisement message is received, the management module
will attempt to connect to a DHCPv6 server to obtain IPv6 addresses
and other configuration parameters. Default on."
::= { ipv6ServicesGroup 2 }
serviceDHCPv6 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When on, requests IPv6 address(es) and configuration
information from the DHCPv6 server. Default off."
::= { ipv6ServicesGroup 3 }
serviceDHCPv6IPAddresses OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When on, the management module will accept IPv6 address(es)
from the DHCPv6 server."
::= { ipv6ServicesGroup 4 }
serviceDHCPv6NetworkPrefix OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When on, the management module will accept the network prefix
from the DHCPv6 server."
::= { ipv6ServicesGroup 5 }
serviceDHCPv6AutoObtainDNS OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If on, the DNS server IP address will be obtained automatically
automatically via DHCP."
::= { ipv6ServicesGroup 6 }
--
-- end of ipv6ServicesGroup
--
--
-- ipv6AddressTable
--
ipv6AddressTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ipv6AddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IPv6 custom address table."
::= { ipv6Group 2 }
ipv6AddressEntry OBJECT-TYPE
SYNTAX Ipv6AddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IPv6 custom entry."
INDEX { ipv6AddressIndex }
::= { ipv6AddressTable 1 }
Ipv6AddressEntry ::=
SEQUENCE {
ipv6AddressIndex GenericTableIndex,
ipv6AddressStatus ContainerStatus,
ipv6AddressAddr Ipv4v6Address,
ipv6AddressPrefixBits Integer32,
ipv6AddressAuto OnOffValue,
ipv6AddressSendAdvertise OnOffValue
}
ipv6AddressIndex OBJECT-TYPE
SYNTAX GenericTableIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Custom IPv6 address index."
::= { ipv6AddressEntry 1 }
ipv6AddressStatus OBJECT-TYPE
SYNTAX ContainerStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When you perform a GET on this variable, one of
the following values will be returned:
1-Indicates that the container folder is active with no changes.
2-Indicates that the container folder is active with change(s).
Once you have completed setting the variables in a folder, you
will want to submit your changes to the management module. To do
this, set the Status variable to 4. If you want to discard the
changes, set the Status variable to 6.
4-Indicates that the changes in the container folder are to be
submitted to the management module and verified. To save the
changes to flash a write of writeToFlash(1) in the adminFunction
object is required.
6-Indicates that the changes in the container folder are to be
discarded."
::= { ipv6AddressEntry 2 }
ipv6AddressAddr OBJECT-TYPE
SYNTAX Ipv4v6Address
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Either enter a network prefix that the Device
Server will use to derive an IPv6 address using the Device
Server's MAC address (must turn ipv6AddressAuto1 on)
or enter a specific IPv6 address."
::= { ipv6AddressEntry 3 }
ipv6AddressPrefixBits OBJECT-TYPE
SYNTAX Integer32(0..128)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IPv6 prefix bits of either the network or
IPv6 address."
::= { ipv6AddressEntry 4 }
ipv6AddressAuto OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When on, the management module will derive
an IPv6 address from the entered network prefix and the
management module's MAC address."
::= {ipv6AddressEntry 5}
ipv6AddressSendAdvertise OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When on, the management module will include
the IPv6 address in router advertisements."
::= {ipv6AddressEntry 6}
--
-- end of ipv6AddressTable
--
--
-- interfacev6StatsTable
--
interfacev6StatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF Interfacev6StatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The interface IPv6 Group table."
::= { ipv6Group 3 }
interfacev6StatsEntry OBJECT-TYPE
SYNTAX Interfacev6StatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the interface IPv6 table"
INDEX { interfacev6Index }
::= { interfacev6StatsTable 1 }
Interfacev6StatsEntry ::=
SEQUENCE {
interfacev6Index GenericTableIndex,
interfacev6Name DisplayString,
interfacev6Address DisplayString,
interfacev6PrefixBits Integer32,
interfacev6Scope INTEGER
}
interfacev6Index OBJECT-TYPE
SYNTAX GenericTableIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IPv6 interface index."
::= { interfacev6StatsEntry 1}
interfacev6Name OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IPv6 interface name."
::= { interfacev6StatsEntry 2}
interfacev6Address OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IPv6 interface IP address."
::= { interfacev6StatsEntry 3}
interfacev6PrefixBits OBJECT-TYPE
SYNTAX Integer32(0..128)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IPv6 interface Prefix bits"
::= { interfacev6StatsEntry 4}
interfacev6Scope OBJECT-TYPE
SYNTAX INTEGER {
global(0),
host(1),
link(2),
site(3),
compatv4(4),
unknown(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IPv6 interface scope."
::= { interfacev6StatsEntry 5}
--
-- end of interfacev6StatsTable
--
--
-- ipv6TunnelTable
--
ipv6TunnelTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ipv6TunnelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IPv6 tunnel table."
::= { ipv6Group 4 }
ipv6TunnelEntry OBJECT-TYPE
SYNTAX Ipv6TunnelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IPv6 tunnel entry."
INDEX { ipv6TunnelIndex }
::= { ipv6TunnelTable 1 }
Ipv6TunnelEntry ::=
SEQUENCE {
ipv6TunnelIndex GenericTableIndex,
ipv6TunnelStatus ContainerStatus,
ipv6TunnelName DisplayString,
ipv6TunnelMode INTEGER,
ipv6TunnelRemoteHost DisplayString
}
ipv6TunnelIndex OBJECT-TYPE
SYNTAX GenericTableIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IPv6 tunnel index."
::= { ipv6TunnelEntry 1 }
ipv6TunnelStatus OBJECT-TYPE
SYNTAX ContainerStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When you perform a GET on this variable, one of
the following values will be returned:
1-Indicates that the container folder is active with no changes.
2-Indicates that the container folder is active with change(s).
Once you have completed setting the variables in a folder, you
will want to submit your changes to the management module. To do
this, set the Status variable to 4. If you want to discard the
changes, set the Status variable to 6.
4-Indicates that the changes in the container folder are to be
submitted to the management module and verified. To save the
changes to flash a write of writeToFlash(1) in the adminFunction
object is required.
6-Indicates that the changes in the container folder are to be
discarded."
::= { ipv6TunnelEntry 2 }
ipv6TunnelName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The name of the IPv6 tunnel. Maximum 16 alphanumeric characters."
::= { ipv6TunnelEntry 3 }
ipv6TunnelMode OBJECT-TYPE
SYNTAX INTEGER {
manual(0),
ip6to4(1),
teredo(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The method or protocol that is used to create the IPv6 tunnel.
o Manual-When specified, the management module will manually create the IPv6
tunnel to the specified Remote Host through the specified Interface.
o ip6to4-When specified, the MCR-MGT will broadcast to the multicast
address 192.88.99.1 through the specified Interface. When the
closest ip6to4 router responds, it will create the IPv6 tunnel,
encapsulating and decapsulating IPv6 traffic sent to and from
the management module.
o Teredo-When specified, the Teredo protocol encapsulates the IPv6
packet as an IPv4 UDP message, allowing it to pass through most
network address translator (NAT) boxes and create an IPv6 tunnel
to the specified Remote Host (a Teredo server) through the
specified Interface.
Default is Manual."
::= { ipv6TunnelEntry 4 }
ipv6TunnelRemoteHost OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IPv4 host that can access the IPv6 network when the Mode
is Manual. The Teredo server when the Mode is Teredo. "
::= { ipv6TunnelEntry 5 }
--
-- end of ipv6TunnelTable
--
--
-- end of ipv6Group
--
--
-- end of mgtNetworkGroup
--
--
-- mgtAcessServicesGroup
--
-- mgtServicesGroup
--
mgtAcessServicesGroup OBJECT IDENTIFIER ::= { mgtAccessGroup 1 }
accessServicesStatus OBJECT-TYPE
SYNTAX ContainerStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When you perform a GET on this variable, one of
the following values will be returned:
1-Indicates that the container folder is active with no changes.
2-Indicates that the container folder is active with change(s).
Once you have completed setting the variables in a folder, you
will want to submit your changes to the management module. To do
this, set the Status variable to 4. If you want to discard the
changes, set the Status variable to 6.
4-Indicates that the changes in the container folder are to be
submitted to the management module and verified. To save the
changes to flash a write of writeToFlash(1) in the adminFunction
object is required.
6-Indicates that the changes in the container folder are to be
discarded."
::= { mgtAcessServicesGroup 1}
accessServicesSessInactTimeout OBJECT-TYPE
SYNTAX Integer32(0..4294967)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The amount of time, in seconds, that the management session inactivity timer
will run. When the timer expires, becuase no activity on the management session
within the specified time, the management module will reset the management session.
A value of 0 (zero), means that the inactivity timer will not expire (the session
is open permanently, or until the user logs out)."
::= { mgtAcessServicesGroup 2 }
--
accessServiceHTTPD OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Turn on/off the HTTPD Service"
::= { mgtAcessServicesGroup 3 }
accessServiceHTTPSD OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Turn on/off the HTTPSD Service"
::= { mgtAcessServicesGroup 4 }
accessServiceTelnetD OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Turn on/off the TelnetD Service"
::= { mgtAcessServicesGroup 5 }
acessServiceSSHD OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Turn on/off the SSHD Service"
::= { mgtAcessServicesGroup 6 }
acessServiceSnmpD OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Turn on/off the SnmpD Service"
::= { mgtAcessServicesGroup 7 }
acessServiceSetIP OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Turn on/off the SetIP Service"
::= { mgtAcessServicesGroup 8 }
acessIncomingPings OBJECT-TYPE
SYNTAX EnableDisableValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allow incoming ping requests."
::= { mgtAcessServicesGroup 9 }
--
--
-- end of mgtAcessServicesGroup
--
--
-- webManagerGroup
--
webManagerGroup OBJECT IDENTIFIER ::= { mgtAccessGroup 2 }
webManagerStatus OBJECT-TYPE
SYNTAX ContainerStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When you perform a GET on this variable, one of
the following values will be returned:
1-Indicates that the container folder is active with no changes.
2-Indicates that the container folder is active with change(s).
Once you have completed setting the variables in a folder, you
will want to submit your changes to the management module. To do
this, set the Status variable to 4. If you want to discard the
changes, set the Status variable to 6.
4-Indicates that the changes in the container folder are to be
submitted to the management module and verified. To save the
changes to flash a write of writeToFlash(1) in the adminFunction
object is required.
6-Indicates that the changes in the container folder are to be
discarded."
::= { webManagerGroup 1}
httpsPassphrase OBJECT-TYPE
SYNTAX DisplayString(SIZE(1..16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the HTTPS SSL certificate passphrase. Reading of this object will
always return a blank string"
::= { webManagerGroup 2}
--
-- end of webManagerGroup
--
--
-- sshServerGroup
--
sshServerGroup OBJECT IDENTIFIER ::= { mgtAccessGroup 3 }
sshServerStatus OBJECT-TYPE
SYNTAX ContainerStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When you perform a GET on this variable, one of
the following values will be returned:
1-Indicates that the container folder is active with no changes.
2-Indicates that the container folder is active with change(s).
Once you have completed setting the variables in a folder, you
will want to submit your changes to the management module. To do
this, set the Status variable to 4. If you want to discard the
changes, set the Status variable to 6.
4-Indicates that the changes in the container folder are to be
submitted to the management module and verified. To save the
changes to flash a write of writeToFlash(1) in the adminFunction
object is required.
6-Indicates that the changes in the container folder are to be
discarded."
::= {sshServerGroup 1 }
sshServerAuthRSA OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When a client SSH session requests RSA authentication,
the management module's SSH server will authenticate the
user via RSA."
::= {sshServerGroup 2}
sshServerAuthDSA OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When a client SSH session requests DSA authentication,
the management module's SSH server will authenticate the
user via DSA"
::= {sshServerGroup 3}
sshServerAuthKeyboard OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The user types in a password for authentication."
::= {sshServerGroup 4}
sshServerAuthPassword OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The user types in a password for authentication."
::= {sshServerGroup 5}
sshServerCipher3Des OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The management module SSH server's 3DES encryption is enable/disabled."
::= {sshServerGroup 6}
sshServerCipherBlowfish OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The management module SSH server's Blowfish encryption is enabled/disabled."
::= {sshServerGroup 7}
sshServerCipherCipherAES OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The management module SSH server's AES encryption is enabled/disabled"
::= {sshServerGroup 8}
sshServerCipherCAST OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The management module SSH server's CAST encryption is enabled/disabled"
::= {sshServerGroup 9}
sshServerCipherArcfour OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The management module SSH server's Arcfour encryption is enabled/disabled."
::= {sshServerGroup 10}
sshServerVerbose OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Displays debug messages on the terminal."
::= {sshServerGroup 11}
sshServerCompression OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Requests compression of all data. Compression is desirable on slow
connections, but will only slow down things on fast networks."
::= {sshServerGroup 12}
sshServerSSH1 OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable SSH-1 on the server."
::= {sshServerGroup 13}
--
-- end of sshServerGroup
--
--
-- snmpAgentGroup
--
snmpAgentGroup OBJECT IDENTIFIER ::= { mgtAccessGroup 4 }
snmpAgentStatus OBJECT-TYPE
SYNTAX ContainerStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When you perform a GET on this variable, one of
the following values will be returned:
1-Indicates that the container folder is active with no changes.
2-Indicates that the container folder is active with change(s).
Once you have completed setting the variables in a folder, you
will want to submit your changes to the management module. To do
this, set the Status variable to 4. If you want to discard the
changes, set the Status variable to 6.
4-Indicates that the changes in the container folder are to be
submitted to the management module and verified. To save the
changes to flash a write of writeToFlash(1) in the adminFunction
object is required.
6-Indicates that the changes in the container folder are to be
discarded."
::= { snmpAgentGroup 1}
snmpContact OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..14))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The name and contract information of the person who manages this SMNP node."
::= { snmpAgentGroup 2}
snmpLocation OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The physical location of the SNMP node."
::= { snmpAgentGroup 3}
--
-- snmpCommunityTable
--
snmpCommunityTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnmpCommunityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of SNMP communities configured for the MCR-MGT agent"
::= { snmpAgentGroup 4}
snmpCommunityEntry OBJECT-TYPE
SYNTAX SnmpCommunityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of the table, each relating to a separate SNMP community
definition "
INDEX { snmpCommunityIndex }
::= { snmpCommunityTable 1 }
SnmpCommunityEntry ::=
SEQUENCE {
snmpCommunityIndex GenericTableIndex,
snmpCommunityStatus ContainerStatus,
snmpCommunityName DisplayString,
snmpCommunityIpAddress Ipv4v6Address,
snmpCommunityPermission INTEGER
}
snmpCommunityIndex OBJECT-TYPE
SYNTAX GenericTableIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The MCR-MGT agent community index"
::= { snmpCommunityEntry 1}
snmpCommunityStatus OBJECT-TYPE
SYNTAX ContainerStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When you perform a GET on this variable, one of
the following values will be returned:
1-Indicates that the container folder is active with no changes.
2-Indicates that the container folder is active with change(s).
Once you have completed setting the variables in a folder, you
will want to submit your changes to the management module. To do
this, set the Status variable to 4. If you want to discard the
changes, set the Status variable to 6.
4-Indicates that the changes in the container folder are to be
submitted to the management module and verified. To save the
changes to flash a write of writeToFlash(1) in the adminFunction
object is required.
6-Indicates that the changes in the container folder are to be
discarded."
::= { snmpCommunityEntry 2}
snmpCommunityName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..14))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A name that will be sent to the management module from an SNMP
manager. This name will define the permissions of the manager."
::= { snmpCommunityEntry 3}
snmpCommunityIpAddress OBJECT-TYPE
SYNTAX Ipv4v6Address
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address of the SNMP manager that will send requests to
the management module. If the address is 0.0.0.0, any SNMP manager
with the Community Name can access the management module."
::= { snmpCommunityEntry 4}
snmpCommunityPermission OBJECT-TYPE
SYNTAX INTEGER {
none(0),
readonly(1),
readwrite(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Permits the management module to respond to SNMP requests by:
None -There is no response to requests from SNMP.
Readonly -Responds only to Read requests from SNMP.
Readwrite -Responds to both Read and Write requests from SNMP."
::= { snmpCommunityEntry 5}
--
-- snmpV3ReadOnlyUser
--
snmpV3ReadOnlyUser OBJECT IDENTIFIER ::= { snmpAgentGroup 5 }
snmpV3ReadOnlyStatus OBJECT-TYPE
SYNTAX ContainerStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When you perform a GET on this variable, one of
the following values will be returned:
1-Indicates that the container folder is active with no changes.
2-Indicates that the container folder is active with change(s).
Once you have completed setting the variables in a folder, you
will want to submit your changes to the management module. To do
this, set the Status variable to 4. If you want to discard the
changes, set the Status variable to 6.
4-Indicates that the changes in the container folder are to be
submitted to the management module and verified. To save the
changes to flash a write of writeToFlash(1) in the adminFunction
object is required.
6-Indicates that the changes in the container folder are to be
discarded."
::= { snmpV3ReadOnlyUser 1 }
snmpV3ReadOnlyUserName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SNMP v3 read-only user name. This SNMP v3 user will have read-only S
SNMP access permissions."
::= { snmpV3ReadOnlyUser 2 }
snmpV3ReadOnlySecurityLevel OBJECT-TYPE
SYNTAX INTEGER {
none(0),
authNoPriv(1),
authPriv(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the SNMP v3 read-only user security level."
::= {snmpV3ReadOnlyUser 3 }
snmpV3ReadOnlyAuthAlgorithm OBJECT-TYPE
SYNTAX INTEGER {
md5(0),
sha(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the SNMP v3 read-only user authentication method."
::= {snmpV3ReadOnlyUser 4 }
snmpV3ReadOnlyAuthPasswd OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the SNMP v3 read-only user authentication password."
::= { snmpV3ReadOnlyUser 5 }
snmpV3ReadOnlyPrivacyAlgorithm OBJECT-TYPE
SYNTAX INTEGER {
des(0),
aes(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the SNMP v3 read-only user privacy algorithm."
::= {snmpV3ReadOnlyUser 6 }
snmpV3ReadOnlyPrivacyPasswd OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the SNMP v3 read-only user privacy password."
::= { snmpV3ReadOnlyUser 7 }
--
-- snmpV3ReadWriteUser
--
snmpV3ReadWriteUser OBJECT IDENTIFIER ::= { snmpAgentGroup 6 }
snmpV3ReadWriteStatus OBJECT-TYPE
SYNTAX ContainerStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When you perform a GET on this variable, one of
the following values will be returned:
1-Indicates that the container folder is active with no changes.
2-Indicates that the container folder is active with change(s).
Once you have completed setting the variables in a folder, you
will want to submit your changes to the management module. To do
this, set the Status variable to 4. If you want to discard the
changes, set the Status variable to 6.
4-Indicates that the changes in the container folder are to be
submitted to the management module and verified. To save the
changes to flash a write of writeToFlash(1) in the adminFunction
object is required.
6-Indicates that the changes in the container folder are to be
discarded."
::= { snmpV3ReadWriteUser 1}
snmpV3ReadWriteUserName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the SNMP v3 read-write user name. This SNMP v3 user will
have read-write SNMP access permissions."
::= { snmpV3ReadWriteUser 2 }
snmpV3ReadWriteSecurityLevel OBJECT-TYPE
SYNTAX INTEGER {
none(0),
authNoPriv(1),
authPriv(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the SNMP v3 read-write user security level."
::= {snmpV3ReadWriteUser 3 }
snmpV3ReadWriteAuthAlgorithm OBJECT-TYPE
SYNTAX INTEGER {
md5(0),
sha(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the SNMP v3 read-write user authentication method."
::= {snmpV3ReadWriteUser 4 }
snmpV3ReadWriteAuthPasswd OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the SNMP v3 read-write user authentication password."
::= { snmpV3ReadWriteUser 5 }
snmpV3ReadWritePrivacyAlgorithm OBJECT-TYPE
SYNTAX INTEGER {
des(0),
aes(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the SNMP v3 read-write user privacy algorithm."
::= {snmpV3ReadWriteUser 6 }
snmpV3ReadWritePrivacyPasswd OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the SNMP v3 read-write user privacy password."
::= { snmpV3ReadWriteUser 7 }
--
-- end of snmpV3ReadWriteUser
--
--
-- end of snmpAgentGroup
--
--
-- authorizedHostGroup
--
authorizedHostGroup OBJECT IDENTIFIER ::= { mgtAccessGroup 5 }
authHostsStatus OBJECT-TYPE
SYNTAX ContainerStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When you perform a GET on this variable, one of
the following values will be returned:
1-Indicates that the container folder is active with no changes.
2-Indicates that the container folder is active with change(s).
Once you have completed setting the variables in a folder, you
will want to submit your changes to the management module. To do
this, set the Status variable to 4. If you want to discard the
changes, set the Status variable to 6.
4-Indicates that the changes in the container folder are to be
submitted to the management module and verified. To save the
changes to flash a write of writeToFlash(1) in the adminFunction
object is required.
6-Indicates that the changes in the container folder are to be
discarded."
::= { authorizedHostGroup 1}
authHostOnly OBJECT-TYPE
SYNTAX YesNoValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Determines whether only authorized hosts are allowed to access the
management module. If set to yes then the management module will only
respond to, and allow access to and from, the IP or MAC addresses
of hosts configured in the authorized IP and MAC hosts tables."
::= { authorizedHostGroup 2 }
--
-- authIpHostTable
--
authIpHostTable OBJECT-TYPE
SYNTAX SEQUENCE OF AuthIpHostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The hosts Group table."
::= { authorizedHostGroup 3 }
authIpHostEntry OBJECT-TYPE
SYNTAX AuthIpHostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the AuthIpHostTable, each relating to a IP host."
INDEX { authHostIpIndex }
::= { authIpHostTable 1 }
AuthIpHostEntry ::=
SEQUENCE {
authHostIpIndex GenericTableIndex,
authHostIpStatus ContainerStatus,
authHostIpAddr Ipv4v6Address,
authHostIpDescr DisplayString
}
authHostIpIndex OBJECT-TYPE
SYNTAX GenericTableIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table entry number for this host."
::= { authIpHostEntry 1 }
authHostIpStatus OBJECT-TYPE
SYNTAX ContainerStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When you perform a GET on this variable, one of
the following values will be returned:
1-Indicates that the container folder is active with no changes.
2-Indicates that the container folder is active with change(s).
Once you have completed setting the variables in a folder, you
will want to submit your changes to the management module. To do
this, set the Status variable to 4. If you want to discard the
changes, set the Status variable to 6.
4-Indicates that the changes in the container folder are to be
submitted to the management module and verified. To save the
changes to flash a write of writeToFlash(1) in the adminFunction
object is required.
6-Indicates that the changes in the container folder are to be
discarded."
::= { authIpHostEntry 2 }
authHostIpAddr OBJECT-TYPE
SYNTAX Ipv4v6Address
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The host IP address used for this entry."
::= { authIpHostEntry 3 }
authHostIpDescr OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..21))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The host IP entry description."
::= { authIpHostEntry 4 }
--
-- end of authIpHostTable
--
--
-- authMacHostTable
--
authMacHostTable OBJECT-TYPE
SYNTAX SEQUENCE OF AuthMacHostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The hosts Group table."
::= { authorizedHostGroup 4 }
authMacHostEntry OBJECT-TYPE
SYNTAX AuthMacHostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the AuthIpHostTable, each relating to a host."
INDEX { authHostMacIndex }
::= { authMacHostTable 1 }
AuthMacHostEntry ::=
SEQUENCE {
authHostMacIndex GenericTableIndex,
authHostMacStatus ContainerStatus,
authHostMacAddr MacAddress,
authHostMacDescr DisplayString
}
authHostMacIndex OBJECT-TYPE
SYNTAX GenericTableIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table entry number for this host."
::= { authMacHostEntry 1 }
authHostMacStatus OBJECT-TYPE
SYNTAX ContainerStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When you perform a GET on this variable, one of
the following values will be returned:
1-Indicates that the container folder is active with no changes.
2-Indicates that the container folder is active with change(s).
Once you have completed setting the variables in a folder, you
will want to submit your changes to the management module. To do
this, set the Status variable to 4. If you want to discard the
changes, set the Status variable to 6.
4-Indicates that the changes in the container folder are to be
submitted to the management module and verified. To save the
changes to flash a write of writeToFlash(1) in the adminFunction
object is required.
6-Indicates that the changes in the container folder are to be
discarded."
::= { authMacHostEntry 2 }
authHostMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The host MAC address used for this entry."
::= { authMacHostEntry 3 }
authHostMacDescr OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..21))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The host MAC address entry description."
::= { authMacHostEntry 4 }
--
-- end of authMacHostTable
--
--
-- end of authorizedHostGroup
--
--
-- end of mgtAccessGroup
--
--
-- mgtAlertGroup
--
alertLocalEventGroup OBJECT IDENTIFIER ::= { mgtAlertGroup 1 }
localEventLogStatus OBJECT-TYPE
SYNTAX ContainerStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When you perform a GET on this variable, one of
the following values will be returned:
1-Indicates that the container folder is active with no changes.
2-Indicates that the container folder is active with change(s).
Once you have completed setting the variables in a folder, you
will want to submit your changes to the management module. To do
this, set the Status variable to 4. If you want to discard the
changes, set the Status variable to 6.
4-Indicates that the changes in the container folder are to be
submitted to the management module and verified. To save the
changes to flash a write of writeToFlash(1) in the adminFunction
object is required.
6-Indicates that the changes in the container folder are to be
discarded."
::= { alertLocalEventGroup 1 }
localEventLogEnabled OBJECT-TYPE
SYNTAX YesNoValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Determines whether alert events are logged to the internal local event
log."
::= { alertLocalEventGroup 2 }
localEventLogAlertLevel OBJECT-TYPE
SYNTAX AlertSeverityLevel
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Choose the alert level that will trigger a local event being stored
in the local event log. When you select an alert level, all alerts that
appear above it in the list will also trigger a local event log message.
For example, if you select oneTimeError, all oneTimeError, persistantError,
moduleLevelFault, and systemLevelFault alert events will be generate a local
event message."
::= { alertLocalEventGroup 3 }
localEventLogClear OBJECT-TYPE
SYNTAX YesNoValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Writing a yes(1) to this object will clear the local event log on the
management module. Reading of this object will always return 0"
::= { alertLocalEventGroup 4 }
--
-- alertSyslogGroup
--
alertSyslogGroup OBJECT IDENTIFIER ::= { mgtAlertGroup 2 }
syslogStatus OBJECT-TYPE
SYNTAX ContainerStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When you perform a GET on this variable, one of
the following values will be returned:
1-Indicates that the container folder is active with no changes.
2-Indicates that the container folder is active with change(s).
Once you have completed setting the variables in a folder, you
will want to submit your changes to the management module. To do
this, set the Status variable to 4. If you want to discard the
changes, set the Status variable to 6.
4-Indicates that the changes in the container folder are to be
submitted to the management module and verified. To save the
changes to flash a write of writeToFlash(1) in the adminFunction
object is required.
6-Indicates that the changes in the container folder are to be
discarded."
::= { alertSyslogGroup 1}
syslogEnabled OBJECT-TYPE
SYNTAX YesNoValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Determines whether syslog is enabled."
::= { alertSyslogGroup 2}
syslogSeverityLevel OBJECT-TYPE
SYNTAX INTEGER {
emergency(0),
alert(1),
critical(2),
error(3),
warning(4),
notice(5),
informational(6),
debug(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Choose the severity level that will trigger a syslog message:
Emergency, Alert, Critical, Error, Warning, Notice, Info, Debug
When you select a severity level, all the levels that appear above it in
the list will also trigger a syslog message. For example, if you select
Error, all Error, Critical, Alert, and Emergency events will generate a
syslog message.
NOTE: In addition to alert events, syslog message will also be generated
for several non-alert system events"
::= { alertSyslogGroup 3}
syslogPrimaryHost OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..14))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The first preconfigured host that the management module will attempt
to send system log messages to; messages will be displayed on the
host's monitor."
::= { alertSyslogGroup 4}
syslogSecondaryHost OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..14))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If the management module cannot communicate with the primary host,
then the management module will attempt to send system log messages to
this preconfigured host; messages will be displayed on the host's monitor."
::= { alertSyslogGroup 5}
--
-- alertSnmpTrapGroup
--
alertSnmpTrapGroup OBJECT IDENTIFIER ::= { mgtAlertGroup 3 }
snmpTrapStatus OBJECT-TYPE
SYNTAX ContainerStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When you perform a GET on this variable, one of
the following values will be returned:
1-Indicates that the container folder is active with no changes.
2-Indicates that the container folder is active with change(s).
Once you have completed setting the variables in a folder, you
will want to submit your changes to the management module. To do
this, set the Status variable to 4. If you want to discard the
changes, set the Status variable to 6.
4-Indicates that the changes in the container folder are to be
submitted to the management module and verified. To save the
changes to flash a write of writeToFlash(1) in the adminFunction
object is required.
6-Indicates that the changes in the container folder are to be
discarded."
::= { alertSnmpTrapGroup 1}
snmpTrapEnabled OBJECT-TYPE
SYNTAX YesNoValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Determines whether SNMP Traps are enabled."
::= { alertSnmpTrapGroup 2}
snmpTrapAlertLevel OBJECT-TYPE
SYNTAX AlertSeverityLevel
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Choose the alert level that will trigger a SNMP trap message to be sent
if SNMP traps is enabled. When you select an alert level, all alerts that
appear above it in the list will also trigger a local event log message.
For example, if you select oneTimeError, all oneTimeError, persistantError,
moduleLevelFault, and systemLevelFault alert events will be generate a SNMP
trap message."
::= { alertSnmpTrapGroup 3}
--
-- snmpTrapHostTable - SNMP Trap target host Table
--
snmpTrapHostTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnmpTrapHostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of SNMP Trap Hosts information."
::= { alertSnmpTrapGroup 4}
snmpTrapHostEntry OBJECT-TYPE
SYNTAX SnmpTrapHostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of the table, each relating to a separate SNMP trap host."
INDEX { snmpTrapHostIndex }
::= { snmpTrapHostTable 1 }
SnmpTrapHostEntry ::=
SEQUENCE {
snmpTrapHostIndex GenericTableIndex,
snmpTrapHostStatus ContainerStatus,
snmpTrapHostIpAddress Ipv4v6Address,
snmpTrapHostUdpPort Integer32,
snmpTrapHostVersion INTEGER,
snmpTrapHostType INTEGER,
snmpTrapHostCommunity DisplayString,
snmpTrapHostEnable YesNoValue
}
snmpTrapHostIndex OBJECT-TYPE
SYNTAX GenericTableIndex
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object identifies the SNMP trap host index."
::= { snmpTrapHostEntry 1 }
snmpTrapHostStatus OBJECT-TYPE
SYNTAX ContainerStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When you perform a GET on this variable, one of
the following values will be returned:
1-Indicates that the container folder is active with no changes.
2-Indicates that the container folder is active with change(s).
Once you have completed setting the variables in a folder, you
will want to submit your changes to the management module. To do
this, set the Status variable to 4. If you want to discard the
changes, set the Status variable to 6.
4-Indicates that the changes in the container folder are to be
submitted to the management module and verified. To save the
changes to flash a write of writeToFlash(1) in the adminFunction
object is required.
6-Indicates that the changes in the container folder are to be
discarded."
::= { snmpTrapHostEntry 2 }
snmpTrapHostIpAddress OBJECT-TYPE
SYNTAX Ipv4v6Address
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Defines the hosts (by IP address) that will receive trap messages
generated by the management module. "
::= { snmpTrapHostEntry 3 }
snmpTrapHostUdpPort OBJECT-TYPE
SYNTAX Integer32(1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Defines the UDP port number the SNMP trap host will listen on to
receive trap messages generated by the management module."
::= { snmpTrapHostEntry 4 }
snmpTrapHostVersion OBJECT-TYPE
SYNTAX INTEGER {
snmpTrapV1(0),
snmpTrapV2c(1),
snmpTrapV3(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Defines the SNMP version of the traps sent to this host. If
snmpTrapV3 is selected then the SNMP trap v3 user "
::= { snmpTrapHostEntry 5 }
snmpTrapHostType OBJECT-TYPE
SYNTAX INTEGER {
snmpTrap(0),
snmpInform(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If set to snmpInform(1) the management module will send traps via an
INFORM-PDU, expecting a response from the trap host, retransmitting
if required. Otherwise it will send them via a TRAP-PDU or TRAP2-PDU.
This object is ignored for for SNMP v1"
::= { snmpTrapHostEntry 6 }
snmpTrapHostCommunity OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..14))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An arbitrary trap community name. This object is ignored for SNMP v3"
::= { snmpTrapHostEntry 7 }
snmpTrapHostEnable OBJECT-TYPE
SYNTAX YesNoValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If set to No, the management module will not use this
table entry to send traps."
::= { snmpTrapHostEntry 8 }
--
-- snmpTrapHostTable - SNMP Trap target host Table
--
--
-- snmpV3TrapUser
--
snmpV3TrapUser OBJECT IDENTIFIER ::= { alertSnmpTrapGroup 5 }
snmpV3TrapUserStatus OBJECT-TYPE
SYNTAX ContainerStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When you perform a GET on this variable, one of
the following values will be returned:
1-Indicates that the container folder is active with no changes.
2-Indicates that the container folder is active with change(s).
Once you have completed setting the variables in a folder, you
will want to submit your changes to the management module. To do
this, set the Status variable to 4. If you want to discard the
changes, set the Status variable to 6.
4-Indicates that the changes in the container folder are to be
submitted to the management module and verified. To save the
changes to flash a write of writeToFlash(1) in the adminFunction
object is required.
6-Indicates that the changes in the container folder are to be
discarded."
::= { snmpV3TrapUser 1}
snmpV3TrapUserUserName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SNMP trap v3 user name. This user will be used for every SNMP trap
host that is using snmpTrapHostVersion of snmpTrapV3(2) "
::= { snmpV3TrapUser 2}
snmpV3TrapUserSecurityLevel OBJECT-TYPE
SYNTAX INTEGER {
none(0),
authNoPriv(1),
authPriv(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SNMP trap v3 user security level."
::= {snmpV3TrapUser 3 }
snmpV3TrapUserAuthAlgorithm OBJECT-TYPE
SYNTAX INTEGER {
md5(0),
sha(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SNMP trap v3 user authentication method."
::= {snmpV3TrapUser 4 }
snmpV3TrapUserAuthPasswd OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SNMP trap v3 user authentication password."
::= { snmpV3TrapUser 5 }
snmpV3TrapUserPrivacyAlgorithm OBJECT-TYPE
SYNTAX INTEGER {
des(0),
aes(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SNMP trap v3 user privacy algorithm."
::= {snmpV3TrapUser 6 }
snmpV3TrapUserPrivacyPasswd OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SNMP trap v3 user privacy password."
::= { snmpV3TrapUser 7 }
--
-- end of snmpV3TrapUser
--
snmpTrapGlbHostTimeout OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Defines the timeout in miliseconds between retries of sending the SNMP
INFORM-PDU if no response is received for the trap host. "
::= { alertSnmpTrapGroup 6 }
snmpTapGlobHostRetries OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Defines the number of retries to send the SNMP INFORM-PDU trap if no
response is received from the trap host."
::= { alertSnmpTrapGroup 7 }
snmpV3LocalEngineID OBJECT-TYPE
SYNTAX SnmpEngineID
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An SNMPv3 engine ID used by the MCR-MGT for identification when sending
SNMP v3 traps."
::= { alertSnmpTrapGroup 8}
snmpV3LocalEngineIDTextSuffix OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..27))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This configured text is used to build the suffix of the SNMPv3
engine ID"
::= { alertSnmpTrapGroup 9}
--
-- end of alertSnmpTrapGroup
--
--
-- snmpTrapVarsGroup
--
snmpTrapVarsGroup OBJECT IDENTIFIER ::= { alertSnmpTrapGroup 10 }
mgtAccessMethod OBJECT-TYPE
SYNTAX INTEGER {
mgtConsole(1),
mgtSnmp(2),
mgtTelnet(3),
mgtSSH(4),
mgtHTTP(5),
mgtHTTPS(6)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Defines the management protocol used to access the management module"
::= { snmpTrapVarsGroup 1 }
remoteMgtIpAddress OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Defines the remote IP address accessing the management module"
::= { snmpTrapVarsGroup 2 }
remoteTftpHost OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..64))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Defines the remote TFTP server IP address or host name performing the
TFP file transfer"
::= { snmpTrapVarsGroup 3 }
remoteTftpFileName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..64))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Defines the remote TFTP file name "
::= { snmpTrapVarsGroup 4 }
networkIpAddress OBJECT-TYPE
SYNTAX Ipv4v6Address
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Defines the IP address assigned to the management module "
::= { snmpTrapVarsGroup 5 }
mcrMediaPortNum OBJECT-TYPE
SYNTAX Unsigned32(1..2)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object identifies the media converter module port number."
::= { snmpTrapVarsGroup 6 }
mcrMediaPortDescr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"A description of the media port that consists of the user defined
media port name, followed by the system name for the port."
::= { snmpTrapVarsGroup 7 }
eventSeverityLevel OBJECT-TYPE
SYNTAX AlertSeverityLevel
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The severity level of the event that generated this trap."
::= { snmpTrapVarsGroup 8 }
xfpDmiRealTimeAux OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the XFP DMI real time values for one of the
auxillary register sets."
::= { snmpTrapVarsGroup 9 }
xfpDmiHighAuxWarn OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the XFP DMI high warning threshold for one
of the auxillary register sets."
::= { snmpTrapVarsGroup 10 }
xfpDmiHighAuxAlarm OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the XFP DMI alarm alarm threshold for one
of the auxillary register sets."
::= { snmpTrapVarsGroup 11 }
xfpDmiLowAuxWarn OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the XFP DMI low warning threshold for one
of the auxillary register sets."
::= { snmpTrapVarsGroup 12 }
xfpDmiLowAuxAlarm OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the XFP DMI low alarm threshold for one
of the auxillary register sets."
::= { snmpTrapVarsGroup 13 }
mcrModuleSubTypeInserted OBJECT-TYPE
SYNTAX INTEGER {
blank(-1),
sts(0),
xts(1),
xtsh(2),
xtx(3),
xtxh(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the module sub-type inserted in the slot."
::= { snmpTrapVarsGroup 14 }
mcrMediaBackedupModuleSubType OBJECT-TYPE
SYNTAX INTEGER {
blank(-1),
sts(0),
xts(1),
xtsh(2),
xtx(3),
xtxh(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the module sub-type of the backup configuration."
::= { snmpTrapVarsGroup 15 }
mcrMediaPortBandwidth OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object identifies the media converter module port's current bandwith in kbps."
::= { snmpTrapVarsGroup 16 }
mcrMediaPortBandwidthThreshold OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object identifies the media converter module port's bandwith threshold in kbps."
::= { snmpTrapVarsGroup 17 }
-- end of snmpTrapBoundVarsGroup
--
--
-- end of alertSnmpTrapGroup
--
--
-- alertEmailGroup
--
alertEmailGroup OBJECT IDENTIFIER ::= { mgtAlertGroup 4 }
emailStatus OBJECT-TYPE
SYNTAX ContainerStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When you perform a GET on this variable, one of
the following values will be returned:
1-Indicates that the container folder is active with no changes.
2-Indicates that the container folder is active with change(s).
Once you have completed setting the variables in a folder, you
will want to submit your changes to the management module. To do
this, set the Status variable to 4. If you want to discard the
changes, set the Status variable to 6.
4-Indicates that the changes in the container folder are to be
submitted to the management module and verified. To save the
changes to flash a write of writeToFlash(1) in the adminFunction
object is required.
6-Indicates that the changes in the container folder are to be
discarded."
::= { alertEmailGroup 1}
emailEnabled OBJECT-TYPE
SYNTAX YesNoValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Determines whether or not email notification is turned on. Default is Off."
::= { alertEmailGroup 2}
emailAlertLevel OBJECT-TYPE
SYNTAX AlertSeverityLevel
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Choose the alert level that will trigger a email message to be sent
if alert email is enabled. When you select an alert level, all alerts that
appear above it in the list will also trigger a local event log message.
For example, if you select oneTimeError, all oneTimeError, persistantError,
moduleLevelFault, and systemLevelFault alert events will be generate a email
message."
::= { alertEmailGroup 3}
emailTo OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An email address or list of email addresses that will
receive the email notification."
::= { alertEmailGroup 4}
emailFrom OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This field can contain an email address that might
identify the management module name or some other value."
::= { alertEmailGroup 5}
emailSMTPHost OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The SMTP host (email server) that will process the
email notification request. This can be either a host
name defined in the management module host table or the
SMTP host IP address."
::= { alertEmailGroup 6}
emailReply OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The email address to whom all replies to the email
notification should go."
::= { alertEmailGroup 7}
emailSubject OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..48))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A text string, which can contain spaces, that will
display in the Subject field of the email notification."
::= { alertEmailGroup 8}
emailSMTPUsername OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The user name for the SMTP server, if the server requires
authentication."
::= { alertEmailGroup 9}
emailSMTPPassword OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The password for the SMTP server, if the server requires
authentication."
::= { alertEmailGroup 10}
emailSMTPEncryption OBJECT-TYPE
SYNTAX INTEGER {
none(1),
tls(2),
ssl(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The encryption method for the SMTP server."
::= { alertEmailGroup 11}
emailSMTPValidatePeerCertificate OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Validate peer SSL/TLS certificate, when SSL or TLS
encryption is used."
::= { alertEmailGroup 12}
emailSMTPTcpPort OBJECT-TYPE
SYNTAX Integer32(1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TCP port used for communicating with the SMTP server.
For no encryption or TLS encryption, use port 25.
For SSL encryption, use port 465."
::= { alertEmailGroup 13 }
emailSMTPDomain OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The domain for NTLM authentication with the SMTP server, if
applicable."
::= { alertEmailGroup 14 }
--
-- end of mgtAlertGroup
--
--
-- mgtUsersGroup
--
mgtUsersStatus OBJECT-TYPE
SYNTAX ContainerStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When you perform a GET on this variable, one of
the following values will be returned:
1-Indicates that the container folder is active with no changes.
2-Indicates that the container folder is active with change(s).
Once you have completed setting the variables in a folder, you
will want to submit your changes to the management module. To do
this, set the Status variable to 4. If you want to discard the
changes, set the Status variable to 6.
4-Indicates that the changes in the container folder are to be
submitted to the management module and verified. To save the
changes to flash a write of writeToFlash(1) in the adminFunction
object is required.
6-Indicates that the changes in the container folder are to be
discarded."
::= { mgtUsersGroup 1}
mgtUsersByPassLoginEnabled OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether by pass login is enabled. When enable users will be
automatically login as admin user. The will not be prompted for a user
ID or password when accessing the management module. "
::= { mgtUsersGroup 2}
mgtUsersPrimaryAuthMethod OBJECT-TYPE
SYNTAX INTEGER {
local(1),
radius(2),
kerberos(3),
ldap(4),
tacacs(5),
securid(6),
nis(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The first authentication method that the management module attempts.
Some type of authentication must be done by the management module."
::= { mgtUsersGroup 3 }
mgtUsersSecondaryAuthMethod OBJECT-TYPE
SYNTAX INTEGER {
none(1),
local(2),
radius(3),
kerberos(4),
ldap(5),
tacacs(6),
securid(7),
nis(8)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If the Primary Authentication Method fails, the next
authentication method that the management module attempts. You
can choose to use authentication methods in combination.
For example, you can specify the Primary Authentication
Method as Local and the Secondary Authentication Method as
RADIUS. Therefore, some users can be defined in the Device
Server (Local) others in RADIUS."
::= { mgtUsersGroup 4 }
mgtUsersAlwaysAttemptSecond OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If enabled, the secondary authentication method will always be used."
::= { mgtUsersGroup 5 }
--
-- localUserAccountsTable
--
localUserAccountsTable OBJECT-TYPE
SYNTAX SEQUENCE OF LocalUserAccountsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Table of locally defined user information"
::= { mgtUsersGroup 6 }
localUserAccountsEntry OBJECT-TYPE
SYNTAX LocalUserAccountsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of the table, each relating to separate user defined locally."
INDEX { userIndex }
::= { localUserAccountsTable 1 }
LocalUserAccountsEntry ::=
SEQUENCE {
userIndex GenericTableIndex,
userStatus ContainerStatus,
userName DisplayString,
userPassword DisplayString,
userLevel INTEGER
}
userIndex OBJECT-TYPE
SYNTAX GenericTableIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table entry number for this user."
::= { localUserAccountsEntry 1 }
userStatus OBJECT-TYPE
SYNTAX ContainerStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When you perform a GET on this variable, one of
the following values will be returned:
1-Indicates that the container folder is active with no changes.
2-Indicates that the container folder is active with change(s).
Once you have completed setting the variables in a folder, you
will want to submit your changes to the management module. To do
this, set the Status variable to 4. If you want to discard the
changes, set the Status variable to 6.
4-Indicates that the changes in the container folder are to be
submitted to the management module and verified. To save the
changes to flash a write of writeToFlash(1) in the adminFunction
object is required.
6-Indicates that the changes in the container folder are to be
discarded."
::= { localUserAccountsEntry 2}
userName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The user name.
To delete a user, set this field to blank.
If blank, this entry is currently unused."
::= { localUserAccountsEntry 3 }
userPassword OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The password for the local user."
::= { localUserAccountsEntry 4}
userLevel OBJECT-TYPE
SYNTAX INTEGER
{
admin(0),
operator(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Admin:
Total access to the management module. More than one admin user
account can exist, but we recommend that you only have one.
operator:
Full read only access to configuration and limited control commands "
::= { localUserAccountsEntry 5}
--
-- end of localUserAccountsTable
--
--
-- localUsersStatusTable
--
localUsersStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF LocalUsersStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Table of locally defined user information"
::= { mgtUsersGroup 7 }
localUsersStatusEntry OBJECT-TYPE
SYNTAX LocalUsersStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of the table, each relating to separate user defined locally."
INDEX { userStatusIndex }
::= { localUsersStatusTable 1 }
LocalUsersStatusEntry ::=
SEQUENCE {
userStatusIndex GenericTableIndex,
userStatusName DisplayString,
userStatusMgtAccessType INTEGER,
userStatusRemoteIPAddress Ipv4v6Address,
userStatusStartTime DisplayString,
userStatusLevel INTEGER
}
userStatusIndex OBJECT-TYPE
SYNTAX GenericTableIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table entry number for this user status."
::= { localUsersStatusEntry 1 }
userStatusName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The user name. To delete a user, set this field to blank. If blank,
this entry is currently unused."
::= { localUsersStatusEntry 2 }
userStatusMgtAccessType OBJECT-TYPE
SYNTAX INTEGER {
mgtAccessHTTP(1),
mgtAccessHTTPS(2),
mgtAccessTelnet(3),
mgtAccessSSH(4),
mgtAccessConsole(5)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines the management protocol used to access the management module"
::= { localUsersStatusEntry 3 }
userStatusRemoteIPAddress OBJECT-TYPE
SYNTAX Ipv4v6Address
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the remote IP address user management session."
::= { localUsersStatusEntry 4 }
userStatusStartTime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the date and time that the current user's
management session started."
::= { localUsersStatusEntry 5 }
userStatusLevel OBJECT-TYPE
SYNTAX INTEGER
{
admin(0),
operator(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Admin:
Total access to the management module. More than one admin user
account can exist, but we recommend that you only have one.
operator:
Full read only access to configuration and limited control commands "
::= { localUsersStatusEntry 6 }
--
--
-- end of localUsersStatusTable
--
--
-- radiusGroup
--
radiusGroup OBJECT IDENTIFIER ::= { mgtUsersGroup 8 }
radiusStatus OBJECT-TYPE
SYNTAX ContainerStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When you perform a GET on this variable, one of
the following values will be returned:
1-Indicates that the container folder is active with no changes.
2-Indicates that the container folder is active with change(s).
Once you have completed setting the variables in a folder, you
will want to submit your changes to the management module. To do
this, set the Status variable to 4. If you want to discard the
changes, set the Status variable to 6.
4-Indicates that the changes in the container folder are to be
submitted to the management module.
6-Indicates that the changes in the container folder are to be
discarded."
::= {radiusGroup 1}
radiusPrimaryAuthHost OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..14))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Primary Radius Authentication Host"
::= {radiusGroup 2}
radiusSecondaryAuthHost OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..14))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Secondary Radius Authentication Host"
::= {radiusGroup 3}
radiusAuthenticationPort OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port that the RADIUS host listens to for
authentication requests. The default port is 1812."
::= {radiusGroup 4}
radiusAccounting OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Radius Accounting "
::= {radiusGroup 5}
radiusPrimaryAcctHost OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..14))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Name of the primary RADIUS authentication host."
::= {radiusGroup 6}
radiusSecondaryAcctHost OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..14))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Name of the secondary RADIUS authentication host."
::= {radiusGroup 7}
radiusAccountingPort OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port that the RADIUS host listens to for
accounting requests. The default port is 1813."
::= {radiusGroup 8}
radiusAcctAuth OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Radius Accounting Authenticator "
::= {radiusGroup 9}
radiusRetryLimit OBJECT-TYPE
SYNTAX Integer32(0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of times the management module tries
to connect to the RADIUS server before erroring
out. Valid values are 0-255. The default is 5."
::= {radiusGroup 10}
radiusTimeout OBJECT-TYPE
SYNTAX Integer32(1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The time, in seconds, that the management module waits
to receive a reply after sending out a request to
a RADIUS accounting or authentication host. If no
reply is received before the timeout period expires,
the management module will retry the same host up to and
including the number of retry attempts. Valid values
are 1-255. The default is 3 seconds."
::= {radiusGroup 11}
radiusNasIdentifier OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The NAS identifier name.
To delete this , set this field to blank."
::= { radiusGroup 12 }
radiusNasIpAddress OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When on, the NAS Identifier obtains ipv4 address automatically.
Default is on."
::= { radiusGroup 13 }
radiusNasSpecifyIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify the unique IPv4 address that NAS Identifier will use"
::= { radiusGroup 14}
radiusNasIpv6Address OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When on, the NAS Identifier obtains ipv6 address automatically.
Default is on."
::= { radiusGroup 15 }
radiusNasSpecifyIpv6Address OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify the unique IPv6 address that NAS Identifier will use"
::= { radiusGroup 16}
--
-- end of radiusGroup
--
--
-- kerberosGroup
--
kerberosGroup OBJECT IDENTIFIER ::= { mgtUsersGroup 9 }
kerberosStatus OBJECT-TYPE
SYNTAX ContainerStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When you perform a GET on this variable, one of
the following values will be returned:
1-Indicates that the container folder is active with no changes.
2-Indicates that the container folder is active with change(s).
Once you have completed setting the variables in a folder, you
will want to submit your changes to the management module. To do
this, set the Status variable to 4. If you want to discard the
changes, set the Status variable to 6.
4-Indicates that the changes in the container folder are to be
submitted to the management module and verified. To save the
changes to flash a write of writeToFlash(1) in the adminFunction
object is required.
6-Indicates that the changes in the container folder are to be
discarded."
::= {kerberosGroup 1}
kerberosRealm OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Kerberos realm is the Kerberos host domain name,
in upper-case letters."
::= {kerberosGroup 2}
kerberosDomain OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The name of a host running the KDC (Key Distribution Center) for the specified
realm. The host name that you specify must either be defined in the management
module's host Table before the last reboot or be resolved by DNS."
::= {kerberosGroup 3}
kerberosPort OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port that the Kerberos server listens to for authentication requests.
If no port is specified, the default port 88 is used."
::= {kerberosGroup 4}
--
-- end of kerberosGroup
--
--
-- ldapGroup
--
ldapGroup OBJECT IDENTIFIER ::= { mgtUsersGroup 10 }
ldapStatus OBJECT-TYPE
SYNTAX ContainerStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When you perform a GET on this variable, one of
the following values will be returned:
1-Indicates that the container folder is active with no changes.
2-Indicates that the container folder is active with change(s).
Once you have completed setting the variables in a folder, you
will want to submit your changes to the management module. To do
this, set the Status variable to 4. If you want to discard the
changes, set the Status variable to 6.
4-Indicates that the changes in the container folder are to be
submitted to the management module and verified. To save the
changes to flash a write of writeToFlash(1) in the adminFunction
object is required.
6-Indicates that the changes in the container folder are to be
discarded."
::= {ldapGroup 1}
ldapHost OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The name or IP address of the LDAP host. If you use
a host name, that host must either have been defined
in the management module's Host Table before the last
reboot or be resolved by DNS. If you are using TLS,
you must enter the same string you used to create
the LDAP certificate. "
::= {ldapGroup 2}
ldapPort OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port that the LDAP host listens to for authentication requests. The default port is 389."
::= {ldapGroup 3}
ldapBase OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The domain component (dc) that is the starting point for the search for user
authentication."
::= {ldapGroup 4}
ldapEnableTLS OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables/disables the Transport Layer Security (TLS) with the LDAP host."
::= {ldapGroup 5}
ldapTLSPort OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify the port number that LDAP will use for TLS. The default is port 636."
::= {ldapGroup 6}
ldapUID OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"LDAP user attribute.
e.g.
uid (OpenLDAP)
sAMAccountName (Active Directory)
The default is 'uid'."
::= {ldapGroup 7}
ldapPasswordEncryption OBJECT-TYPE
SYNTAX INTEGER {
none(1),
md5(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"LDAP password encryption method."
::= {ldapGroup 8}
ldapClientAuth OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"LDAP client authentication."
::= {ldapGroup 9}
ldapClientName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"LDAP client name. Identifies the unit to the LDAP server, when client
authentication is ."
::= {ldapGroup 10}
ldapClientAppendBase OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Append base to LDAP client name."
::= {ldapGroup 11}
ldapClientPassword OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"LDAP client password. Identifies the unit to the LDAP server, when client
authentication is ."
::= {ldapGroup 12}
--
-- end of ldapGroup
--
--
-- tacacsGroup
--
tacacsGroup OBJECT IDENTIFIER ::= { mgtUsersGroup 11 }
tacacsStatus OBJECT-TYPE
SYNTAX ContainerStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When you perform a GET on this variable, one of
the following values will be returned:
1-Indicates that the container folder is active with no changes.
2-Indicates that the container folder is active with change(s).
Once you have completed setting the variables in a folder, you
will want to submit your changes to the management module. To do
this, set the Status variable to 4. If you want to discard the
changes, set the Status variable to 6.
4-Indicates that the changes in the container folder are to be
submitted to the management module and verified. To save the
changes to flash a write of writeToFlash(1) in the adminFunction
object is required.
6-Indicates that the changes in the container folder are to be
discarded."
::= {tacacsGroup 1}
tacacsPrimaryHost OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..14))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The primary TACACS+ host that is used for authentication."
::= {tacacsGroup 2}
tacacsSecondaryHost OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..14))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The secondary TACACS+ host that is used for authentication, should the primary
TACACS+ host fail to respond."
::= {tacacsGroup 3}
tacacsPort OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port number that TACACS+ listens to for authentication requests. The default
port number is 49."
::= {tacacsGroup 4}
tacacsAccounting OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable TACACS+ accounting"
::= {tacacsGroup 5}
tacacsAccountingPrimaryHost OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..14))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The primary TACACS+ accounting host that is used for."
::= {tacacsGroup 6}
tacacsAccountingSecondaryHost OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..14))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The secondary TACACS+ accounting host that is used for , should the primary
TACACS+ host fail to respond."
::= {tacacsGroup 7}
tacacsAccountingPort OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port number that TACACS+ listens to for accounting requests. The default
port number is 49."
::= {tacacsGroup 8}
tacacsAuthorization OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable TACACS+ authorization"
::= {tacacsGroup 9}
tacacsAlternateServiceNames OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable alternate service names for TACACS+."
::= {tacacsGroup 10}
--
-- tacacsGroup
--
--
-- securidGroup
--
securidGroup OBJECT IDENTIFIER ::= { mgtUsersGroup 12 }
securidStatus OBJECT-TYPE
SYNTAX ContainerStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When you perform a GET on this variable, one of
the following values will be returned:
1-Indicates that the container folder is active with no changes.
2-Indicates that the container folder is active with change(s).
Once you have completed setting the variables in a folder, you
will want to submit your changes to the management module. To do
this, set the Status variable to 4. If you want to discard the
changes, set the Status variable to 6.
4-Indicates that the changes in the container folder are to be
submitted to the management module and verified. To save the
changes to flash a write of writeToFlash(1) in the adminFunction
object is required.
6-Indicates that the changes in the container folder are to be
discarded."
::= {securidGroup 1}
securidMasterHost OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..14))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The first SecurID server that is tried for
user authentication."
::= {securidGroup 2}
securidSlaveHost OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..14))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If the first SecurID server does not respond
to an authentication request, this is the next
SecurID server that is tried for user authentication."
::= {securidGroup 3}
securidPort OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port number that SecurID listens to for
authentication requests. The default port number is 5500."
::= {securidGroup 4}
securidType OBJECT-TYPE
SYNTAX INTEGER {
des(1),
sdi(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"You can specify either SDI or DES encryption for SecurID
server communication. The default is SDI encryption."
::= {securidGroup 5}
securidLegacy OBJECT-TYPE
SYNTAX YesNoValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If you are running SecurID 3.x or 4.x, you need to run
in Legacy Mode. If you are running SecurID 5.x or above,
do not select Legacy Mode."
::= {securidGroup 6}
--
-- end of securidGroup
--
--
-- nisGroup
--
nisGroup OBJECT IDENTIFIER ::= { mgtUsersGroup 13 }
nisStatus OBJECT-TYPE
SYNTAX ContainerStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When you perform a GET on this variable, one of
the following values will be returned:
1-Indicates that the container folder is active with no changes.
2-Indicates that the container folder is active with change(s).
Once you have completed setting the variables in a folder, you
will want to submit your changes to the management module. To do
this, set the Status variable to 4. If you want to discard the
changes, set the Status variable to 6.
4-Indicates that the changes in the container folder are to be
submitted to the management module and verified. To save the
changes to flash a write of writeToFlash(1) in the adminFunction
object is required.
6-Indicates that the changes in the container folder are to be
discarded."
::= {nisGroup 1}
nisDomain OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The NIS domain name."
::= {nisGroup 2}
nisPrimaryHost OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..14))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The primary NIS host that is used for authentication."
::= {nisGroup 3}
nisSecondaryHost OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..14))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The secondary NIS host that is used for authentication,
should the primary NIS host fail to respond."
::= {nisGroup 4}
--
-- end of nisGroup
--
--
-- end of mgtUsersGroup
--
--
-- mgtDateTimeGroup
--
mgtDateTimeStatus OBJECT-TYPE
SYNTAX ContainerStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When you perform a GET on this variable, one of
the following values will be returned:
1-Indicates that the container folder is active with no changes.
2-Indicates that the container folder is active with change(s).
Once you have completed setting the variables in a folder, you
will want to submit your changes to the management module. To do
this, set the Status variable to 4. If you want to discard the
changes, set the Status variable to 6.
4-Indicates that the changes in the container folder are to be
submitted to the management module and verified. To save the
changes to flash a write of writeToFlash(1) in the adminFunction
object is required.
6-Indicates that the changes in the container folder are to be
discarded."
::= {mgtDateTimeGroup 1}
systemDate OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The system date. Format dd/mm/yyyy."
::= { mgtDateTimeGroup 2 }
systemTime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The system time (local time). Format hh:mm:ss."
::= { mgtDateTimeGroup 3 }
systemDateTimeAndOffset OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This read only object identifies the current system date, time and GMT offset. The
date and time will be displayed in the regional time format configured."
::= { mgtDateTimeGroup 4 }
timeZoneListEnable OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When the time zone list is enabled then the time zone being use is the
one selected form the predefined list of time zones. If not enabled then
the customTimeZoneGroup will define the time zone being used"
::= { mgtDateTimeGroup 5 }
selectionFromTimeZoneList OBJECT-TYPE
SYNTAX INTEGER {
tzAfricaAbidjan(0),
tzAfricaAccra(1),
tzAfricaAddisAbaba(2),
tzAfricaAlgiers(3),
tzAfricaAsmera(4),
tzAfricaBamako(5),
tzAfricaBangui(6),
tzAfricaBanjul(7),
tzAfricaBissau(8),
tzAfricaBlantyre(9),
tzAfricaBrazzaville(10),
tzAfricaBujumbura(11),
tzAfricaCairo(12),
tzAfricaCasablanca(13),
tzAfricaCeuta(14),
tzAfricaConakry(15),
tzAfricaDakar(16),
tzAfricaDaresSalaam(17),
tzAfricaDjibouti(18),
tzAfricaDouala(19),
tzAfricaElAaiun(20),
tzAfricaFreetown(21),
tzAfricaGaborone(22),
tzAfricaHarare(23),
tzAfricaJohannesburg(24),
tzAfricaKampala(25),
tzAfricaKhartoum(26),
tzAfricaKigali(27),
tzAfricaKinshasa(28),
tzAfricaLagos(29),
tzAfricaLibreville(30),
tzAfricaLome(31),
tzAfricaLuanda(32),
tzAfricaLubumbashi(33),
tzAfricaLusaka(34),
tzAfricaMalabo(35),
tzAfricaMaputo(36),
tzAfricaMaseru(37),
tzAfricaMbabane(38),
tzAfricaMogadishu(39),
tzAfricaMonrovia(40),
tzAfricaNairobi(41),
tzAfricaNdjamena(42),
tzAfricaNiamey(43),
tzAfricaNouakchott(44),
tzAfricaOuagadougou(45),
tzAfricaPortoNovo(46),
tzAfricaSaoTome(47),
tzAfricaTimbuktu(48),
tzAfricaTripoli(49),
tzAfricaTunis(50),
tzAfricaWindhoek(51),
tzAmericaAdak(52),
tzAmericaAnchorage(53),
tzAmericaAnguilla(54),
tzAmericaAntigua(55),
tzAmericaAraguaina(56),
tzAmericaAruba(57),
tzAmericaAsuncion(58),
tzAmericaAtka(59),
tzAmericaBarbados(60),
tzAmericaBelem(61),
tzAmericaBelize(62),
tzAmericaBoaVista(63),
tzAmericaBogota(64),
tzAmericaBoise(65),
tzAmericaBuenosAires(66),
tzAmericaCambridgeBay(67),
tzAmericaCancun(68),
tzAmericaCaracas(69),
tzAmericaCatamarca(70),
tzAmericaCayenne(71),
tzAmericaCayman(72),
tzAmericaChicago(73),
tzAmericaChihuahua(74),
tzAmericaCordoba(75),
tzAmericaCostaRica(76),
tzAmericaCuiaba(77),
tzAmericaCuracao(78),
tzAmericaDanmarkshavn(79),
tzAmericaDawson(80),
tzAmericaDawsonCreek(81),
tzAmericaDenver(82),
tzAmericaDetroit(83),
tzAmericaDominica(84),
tzAmericaEdmonton(85),
tzAmericaEirunepe(86),
tzAmericaElSalvador(87),
tzAmericaEnsenada(88),
tzAmericaFortWayne(89),
tzAmericaFortaleza(90),
tzAmericaGlaceBay(91),
tzAmericaGodthab(92),
tzAmericaGooseBay(93),
tzAmericaGrandTurk(94),
tzAmericaGrenada(95),
tzAmericaGuadeloupe(96),
tzAmericaGuatemala(97),
tzAmericaGuayaquil(98),
tzAmericaGuyana(99),
tzAmericaHalifax(100),
tzAmericaHavana(101),
tzAmericaHermosillo(102),
tzAmericaIndianaIndianapolis(103),
tzAmericaIndianaKnox(104),
tzAmericaIndianaMarengo(105),
tzAmericaIndianaVevay(106),
tzAmericaIndianapolis(107),
tzAmericaInuvik(108),
tzAmericaIqaluit(109),
tzAmericaJamaica(110),
tzAmericaJujuy(111),
tzAmericaJuneau(112),
tzAmericaKentuckyLouisville(113),
tzAmericaKentuckyMonticello(114),
tzAmericaKnoxIN(115),
tzAmericaLaPaz(116),
tzAmericaLima(117),
tzAmericaLosAngeles(118),
tzAmericaLouisville(119),
tzAmericaMaceio(120),
tzAmericaManagua(121),
tzAmericaManaus(122),
tzAmericaMartinique(123),
tzAmericaMazatlan(124),
tzAmericaMendoza(125),
tzAmericaMenominee(126),
tzAmericaMerida(127),
tzAmericaMexicoCity(128),
tzAmericaMiquelon(129),
tzAmericaMonterrey(130),
tzAmericaMontevideo(131),
tzAmericaMontreal(132),
tzAmericaMontserrat(133),
tzAmericaNassau(134),
tzAmericaNewYork(135),
tzAmericaNipigon(136),
tzAmericaNome(137),
tzAmericaNoronha(138),
tzAmericaNorthDakotaCenter(139),
tzAmericaPanama(140),
tzAmericaPangnirtung(141),
tzAmericaParamaribo(142),
tzAmericaPhoenix(143),
tzAmericaPortofSpain(144),
tzAmericaPortauPrince(145),
tzAmericaPortoAcre(146),
tzAmericaPortoVelho(147),
tzAmericaPuertoRico(148),
tzAmericaRainyRiver(149),
tzAmericaRankinInlet(150),
tzAmericaRecife(151),
tzAmericaRegina(152),
tzAmericaRioBranco(153),
tzAmericaRosario(154),
tzAmericaSantiago(155),
tzAmericaSantoDomingo(156),
tzAmericaSaoPaulo(157),
tzAmericaScoresbysund(158),
tzAmericaShiprock(159),
tzAmericaStJohns(160),
tzAmericaStKitts(161),
tzAmericaStLucia(162),
tzAmericaStThomas(163),
tzAmericaStVincent(164),
tzAmericaSwiftCurrent(165),
tzAmericaTegucigalpa(166),
tzAmericaThule(167),
tzAmericaThunderBay(168),
tzAmericaTijuana(169),
tzAmericaTortola(170),
tzAmericaVancouver(171),
tzAmericaVirgin(172),
tzAmericaWhitehorse(173),
tzAmericaWinnipeg(174),
tzAmericaYakutat(175),
tzAmericaYellowknife(176),
tzAntarcticaCasey(177),
tzAntarcticaDavis(178),
tzAntarcticaDumontDUrville(179),
tzAntarcticaMawson(180),
tzAntarcticaMcMurdo(181),
tzAntarcticaPalmer(182),
tzAntarcticaSouthPole(183),
tzAntarcticaSyowa(184),
tzAntarcticaVostok(185),
tzArcticLongyearbyen(186),
tzAsiaAden(187),
tzAsiaAlmaty(188),
tzAsiaAmman(189),
tzAsiaAnadyr(190),
tzAsiaAqtau(191),
tzAsiaAqtobe(192),
tzAsiaAshgabat(193),
tzAsiaAshkhabad(194),
tzAsiaBaghdad(195),
tzAsiaBahrain(196),
tzAsiaBaku(197),
tzAsiaBangkok(198),
tzAsiaBeirut(199),
tzAsiaBishkek(200),
tzAsiaBrunei(201),
tzAsiaCalcutta(202),
tzAsiaChoibalsan(203),
tzAsiaChongqing(204),
tzAsiaChungking(205),
tzAsiaColombo(206),
tzAsiaDacca(207),
tzAsiaDamascus(208),
tzAsiaDhaka(209),
tzAsiaDili(210),
tzAsiaDubai(211),
tzAsiaDushanbe(212),
tzAsiaGaza(213),
tzAsiaHarbin(214),
tzAsiaHongKong(215),
tzAsiaHovd(216),
tzAsiaIrkutsk(217),
tzAsiaIstanbul(218),
tzAsiaJakarta(219),
tzAsiaJayapura(220),
tzAsiaJerusalem(221),
tzAsiaKabul(222),
tzAsiaKamchatka(223),
tzAsiaKarachi(224),
tzAsiaKashgar(225),
tzAsiaKatmandu(226),
tzAsiaKrasnoyarsk(227),
tzAsiaKualaLumpur(228),
tzAsiaKuching(229),
tzAsiaKuwait(230),
tzAsiaMacao(231),
tzAsiaMagadan(232),
tzAsiaManila(233),
tzAsiaMuscat(234),
tzAsiaNicosia(235),
tzAsiaNovosibirsk(236),
tzAsiaOmsk(237),
tzAsiaPhnomPenh(238),
tzAsiaPontianak(239),
tzAsiaPyongyang(240),
tzAsiaQatar(241),
tzAsiaRangoon(242),
tzAsiaRiyadh(243),
tzAsiaSaigon(244),
tzAsiaSakhalin(245),
tzAsiaSamarkand(246),
tzAsiaSeoul(247),
tzAsiaShanghai(248),
tzAsiaSingapore(249),
tzAsiaTaipei(250),
tzAsiaTashkent(251),
tzAsiaTbilisi(252),
tzAsiaTehran(253),
tzAsiaTelAviv(254),
tzAsiaThimbu(255),
tzAsiaThimphu(256),
tzAsiaTokyo(257),
tzAsiaUjungPandang(258),
tzAsiaUlaanbaatar(259),
tzAsiaUlanBator(260),
tzAsiaUrumqi(261),
tzAsiaVientiane(262),
tzAsiaVladivostok(263),
tzAsiaYakutsk(264),
tzAsiaYekaterinburg(265),
tzAsiaYerevan(266),
tzAtlanticAzores(267),
tzAtlanticBermuda(268),
tzAtlanticCanary(269),
tzAtlanticCapeVerde(270),
tzAtlanticFaeroe(271),
tzAtlanticJanMayen(272),
tzAtlanticMadeira(273),
tzAtlanticReykjavik(274),
tzAtlanticSouthGeorgia(275),
tzAtlanticStHelena(276),
tzAtlanticStanley(277),
tzAustraliaACT(278),
tzAustraliaAdelaide(279),
tzAustraliaBrisbane(280),
tzAustraliaBrokenHill(281),
tzAustraliaCanberra(282),
tzAustraliaDarwin(283),
tzAustraliaHobart(284),
tzAustraliaLHI(285),
tzAustraliaLindeman(286),
tzAustraliaLordHowe(287),
tzAustraliaMelbourne(288),
tzAustraliaNSW(289),
tzAustraliaNorth(290),
tzAustraliaPerth(291),
tzAustraliaQueensland(292),
tzAustraliaSouth(293),
tzAustraliaSydney(294),
tzAustraliaTasmania(295),
tzAustraliaVictoria(296),
tzAustraliaWest(297),
tzAustraliaYancowinna(298),
tzBrazilDeNoronha(299),
tzBrazilEast(300),
tzBrazilWest(301),
tzCanadaAtlantic(302),
tzCanadaCentral(303),
tzCanadaEastSaskatchewan(304),
tzCanadaEastern(305),
tzCanadaMountain(306),
tzCanadaNewfoundland(307),
tzCanadaPacific(308),
tzCanadaSaskatchewan(309),
tzCanadaYukon(310),
tzChileContinental(311),
tzChileEasterIsland(312),
tzCuba(313),
tzEgypt(314),
tzEire(315),
tzEuropeAmsterdam(316),
tzEuropeAndorra(317),
tzEuropeAthens(318),
tzEuropeBelfast(319),
tzEuropeBelgrade(320),
tzEuropeBerlin(321),
tzEuropeBratislava(322),
tzEuropeBrussels(323),
tzEuropeBucharest(324),
tzEuropeBudapest(325),
tzEuropeChisinau(326),
tzEuropeCopenhagen(327),
tzEuropeDublin(328),
tzEuropeGibraltar(329),
tzEuropeHelsinki(330),
tzEuropeIstanbul(331),
tzEuropeKaliningrad(332),
tzEuropeKiev(333),
tzEuropeLisbon(334),
tzEuropeLjubljana(335),
tzEuropeLondon(336),
tzEuropeLuxembourg(337),
tzEuropeMadrid(338),
tzEuropeMalta(339),
tzEuropeMinsk(340),
tzEuropeMonaco(341),
tzEuropeMoscow(342),
tzEuropeNicosia(343),
tzEuropeOslo(344),
tzEuropeParis(345),
tzEuropePrague(346),
tzEuropeRiga(347),
tzEuropeRome(348),
tzEuropeSamara(349),
tzEuropeSanMarino(350),
tzEuropeSarajevo(351),
tzEuropeSimferopol(352),
tzEuropeSkopje(353),
tzEuropeSofia(354),
tzEuropeStockholm(355),
tzEuropeTallinn(356),
tzEuropeTirane(357),
tzEuropeTiraspol(358),
tzEuropeUzhgorod(359),
tzEuropeVaduz(360),
tzEuropeVatican(361),
tzEuropeVienna(362),
tzEuropeVilnius(363),
tzEuropeWarsaw(364),
tzEuropeZagreb(365),
tzEuropeZaporozhye(366),
tzEuropeZurich(367),
tzGreatBritainEire(368),
tzGreatBritainGreatBritain(369),
tzHongKong(370),
tzIceland(371),
tzIndianAntananarivo(372),
tzIndianChagos(373),
tzIndianChristmas(374),
tzIndianCocos(375),
tzIndianComoro(376),
tzIndianKerguelen(377),
tzIndianMahe(378),
tzIndianMaldives(379),
tzIndianMauritius(380),
tzIndianMayotte(381),
tzIndianReunion(382),
tzIran(383),
tzIsrael(384),
tzJamaica(385),
tzJapan(386),
tzKwajalein(387),
tzLibya(388),
tzMexicoBajaNorte(389),
tzMexicoBajaSur(390),
tzMexicoGeneral(391),
tzNavajo(392),
tzNewZealandChatham(393),
tzNewZealandNewZealand(394),
tzPacificApia(395),
tzPacificAuckland(396),
tzPacificChatham(397),
tzPacificEaster(398),
tzPacificEfate(399),
tzPacificEnderbury(400),
tzPacificFakaofo(401),
tzPacificFiji(402),
tzPacificFunafuti(403),
tzPacificGalapagos(404),
tzPacificGambier(405),
tzPacificGuadalcanal(406),
tzPacificGuam(407),
tzPacificHonolulu(408),
tzPacificJohnston(409),
tzPacificKiritimati(410),
tzPacificKosrae(411),
tzPacificKwajalein(412),
tzPacificMajuro(413),
tzPacificMarquesas(414),
tzPacificMidway(415),
tzPacificNauru(416),
tzPacificNiue(417),
tzPacificNorfolk(418),
tzPacificNoumea(419),
tzPacificPagoPago(420),
tzPacificPalau(421),
tzPacificPitcairn(422),
tzPacificPonape(423),
tzPacificPortMoresby(424),
tzPacificRarotonga(425),
tzPacificSaipan(426),
tzPacificSamoa(427),
tzPacificTahiti(428),
tzPacificTarawa(429),
tzPacificTongatapu(430),
tzPacificTruk(431),
tzPacificWake(432),
tzPacificWallis(433),
tzPacificYap(434),
tzPoland(435),
tzPortugal(436),
tzSingapore(437),
tzTurkey(438),
tzUSAlaska(439),
tzUSAleutian(440),
tzUSArizona(441),
tzUSCentral(442),
tzUSEastIndiana(443),
tzUSEastern(444),
tzUSHawaii(445),
tzUSIndianaStarke(446),
tzUSMichigan(447),
tzUSMountain(448),
tzUSPacific(449),
tzUSSamoa(450)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the predefined time zone selected. This time zone
will be used if timeZoneListEnable object is set to yes.
configured."
::= { mgtDateTimeGroup 6 }
timeZoneAdjustForDST OBJECT-TYPE
SYNTAX YesNoValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies if the time will be adjusted for DST (Daylight
Savings Time) or not."
::= { mgtDateTimeGroup 7 }
customTimeZoneGroup OBJECT IDENTIFIER ::= { mgtDateTimeGroup 8 }
customTimeZoneStatus OBJECT-TYPE
SYNTAX ContainerStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When you perform a GET on this variable, one of
the following values will be returned:
1-Indicates that the container folder is active with no changes.
2-Indicates that the container folder is active with change(s).
Once you have completed setting the variables in a folder, you
will want to submit your changes to the management module. To do
this, set the Status variable to 4. If you want to discard the
changes, set the Status variable to 6.
4-Indicates that the changes in the container folder are to be
submitted to the management module and verified. To save the
changes to flash a write of writeToFlash(1) in the adminFunction
object is required.
6-Indicates that the changes in the container folder are to be
discarded."
::= {customTimeZoneGroup 1}
timeZoneName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..4))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The name of the time zone when using standard time."
::= { customTimeZoneGroup 2 }
timeOffset OBJECT-TYPE
SYNTAX Integer32(-720..840)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The offset of summer time from standard time in minutes."
::= { customTimeZoneGroup 3 }
timeSummerName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..4))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The name of the time zone when using summer time."
::= { customTimeZoneGroup 4 }
timeSummerOffset OBJECT-TYPE
SYNTAX Integer32(0..180)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The offset of summer time from standard time in minutes."
::= { customTimeZoneGroup 5 }
timeSummerMode OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
fixed(1),
recurring(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"You can configure the summer time to take effect:
None-No summer time change.
Fixed-The summer time change goes into effect at
the specified time every year. For example,
April 15 at 1:00 pm.
Recurring-The summer time changes goes into effect
every year at same relative time. For example,
on the third week in April on a Tuesday at 1:00 pm."
::= { customTimeZoneGroup 6 }
timeSummerRecStartMonth OBJECT-TYPE
SYNTAX INTEGER {
january(0),
february(1),
march(2),
april(3),
may(4),
june(5),
july(6),
august(7),
september(8),
october(9),
november(10),
december(11)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The recurring summer time start month."
::= { customTimeZoneGroup 7 }
timeSummerRecStartWeek OBJECT-TYPE
SYNTAX INTEGER {
first(0),
second(1),
third(2),
fourth(3),
last(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The recurring summer time start week."
::= { customTimeZoneGroup 8 }
timeSummerRecStartDay OBJECT-TYPE
SYNTAX INTEGER {
sunday(0),
monday(1),
tuesday(2),
wednesday(3),
thursday(4),
friday(5),
saturday(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The recurring summer time start day."
::= { customTimeZoneGroup 9 }
timeSummerRecStartHour OBJECT-TYPE
SYNTAX Integer32(0..23)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The recurring summer time start hour."
::= { customTimeZoneGroup 10 }
timeSummerRecStartMin OBJECT-TYPE
SYNTAX Integer32(0..59)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The recurring summer time start minute"
::= { customTimeZoneGroup 11 }
timeSummerRecEndMonth OBJECT-TYPE
SYNTAX INTEGER {
january(0),
february(1),
march(2),
april(3),
may(4),
june(5),
july(6),
august(7),
september(8),
october(9),
november(10),
december(11)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The recurring summer time end month."
::= { customTimeZoneGroup 12 }
timeSummerRecEndWeek OBJECT-TYPE
SYNTAX INTEGER {
first(0),
second(1),
third(2),
fourth(3),
last(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The recurring summer time end week."
::= { customTimeZoneGroup 13 }
timeSummerRecEndDay OBJECT-TYPE
SYNTAX INTEGER {
sunday(0),
monday(1),
tuesday(2),
wednesday(3),
thursday(4),
friday(5),
saturday(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The recurring summer time end day."
::= { customTimeZoneGroup 14 }
timeSummerRecEndHour OBJECT-TYPE
SYNTAX Integer32(0..23)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The recurring summer time end hour"
::= { customTimeZoneGroup 15 }
timeSummerRecEndMin OBJECT-TYPE
SYNTAX Integer32(0..59)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The recurring summer time end minute"
::= { customTimeZoneGroup 16 }
timeSummerFixStartMonth OBJECT-TYPE
SYNTAX INTEGER {
january(0),
february(1),
march(2),
april(3),
may(4),
june(5),
july(6),
august(7),
september(8),
october(9),
november(10),
december(11)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The fixed summer time start month"
::= { customTimeZoneGroup 17 }
timeSummerFixStartDay OBJECT-TYPE
SYNTAX Integer32(1..31)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The fixed summer time start day"
::= { customTimeZoneGroup 18 }
timeSummerFixStartHour OBJECT-TYPE
SYNTAX Integer32(0..23)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The fixed summer time start hour"
::= { customTimeZoneGroup 19 }
timeSummerFixStartMinute OBJECT-TYPE
SYNTAX Integer32(0..59)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The fixed summer time start minute"
::= { customTimeZoneGroup 20 }
timeSummerFixEndMonth OBJECT-TYPE
SYNTAX INTEGER {
january(0),
february(1),
march(2),
april(3),
may(4),
june(5),
july(6),
august(7),
september(8),
october(9),
november(10),
december(11)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The fixed summer time End month"
::= { customTimeZoneGroup 21 }
timeSummerFixEndDay OBJECT-TYPE
SYNTAX Integer32(1..31)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The fixed summer time End day"
::= { customTimeZoneGroup 22 }
timeSummerFixEndHour OBJECT-TYPE
SYNTAX Integer32(0..23)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The fixed summer time End hour"
::= { customTimeZoneGroup 23 }
timeSummerFixEndMinute OBJECT-TYPE
SYNTAX Integer32(0..59)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The fixed summer time End minute"
::= { customTimeZoneGroup 24 }
--
-- end of customTimeZoneGroup
--
networkTimeGroup OBJECT IDENTIFIER ::= { mgtDateTimeGroup 9 }
--
-- networkTimeGroup
--
timeStatus OBJECT-TYPE
SYNTAX ContainerStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When you perform a GET on this variable, one of
the following values will be returned:
1-Indicates that the container folder is active with no changes.
2-Indicates that the container folder is active with change(s).
Once you have completed setting the variables in a folder, you
will want to submit your changes to the management module. To do
this, set the Status variable to 4. If you want to discard the
changes, set the Status variable to 6.
4-Indicates that the changes in the container folder are to be
submitted to the management module and verified. To save the
changes to flash a write of writeToFlash(1) in the adminFunction
object is required.
6-Indicates that the changes in the container folder are to be
discarded."
::= { networkTimeGroup 1 }
timeSntpMode OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
unicast(1),
multicast(2),
anycast(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The SNTP client mode. Valid modes are Disabled, Unicast, Multicast or Anycast"
::= { networkTimeGroup 2 }
timeSntpVersion OBJECT-TYPE
SYNTAX INTEGER {
version1(0),
version2(1),
version3(2),
version4(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The sntp client version."
::= { networkTimeGroup 3 }
timeSntpHost1 OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..14))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The first remote SNTP host name that the device server communicates with."
::= { networkTimeGroup 4 }
timeSntpHost2 OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..14))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The second remote SNTP host name that the device server communicates with."
::= { networkTimeGroup 5 }
sntpStatGroup OBJECT IDENTIFIER ::= { networkTimeGroup 6 }
--
-- sntpStatGroup
--
sntpStatAddress OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address of the remote SNMP host that updated the time."
::= { sntpStatGroup 1}
sntpStatLastUpdate OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time of the last update."
::= { sntpStatGroup 2}
sntpStatLeapIndicator OBJECT-TYPE
SYNTAX INTEGER {
noWarning(0),
minutes61(1),
minutes59(2),
alarm(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The leap year indicator."
::= { sntpStatGroup 3}
sntpStatVersion OBJECT-TYPE
SYNTAX INTEGER {
ipV4(3),
ipv4ipv6osi(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The SNTP version. "
::= { sntpStatGroup 4}
sntpStatMode OBJECT-TYPE
SYNTAX INTEGER {
reserved(0),
symmetricActive(1),
symmetricPassive(2),
client(3),
server(4),
broadcast(5),
reservedNTP(6),
reserved2(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current SNTP mode"
::= { sntpStatGroup 5}
sntpStatStratum OBJECT-TYPE
SYNTAX Integer32(0..15)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The SNTP stratum."
::= { sntpStatGroup 6}
sntpStatRefId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The SNTP reference ID."
::= { sntpStatGroup 7}
sntpStatOffset OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The SNTP offset"
::= { sntpStatGroup 8}
--
-- end of sntpStatGroup
--
timeSntpServerAuthentication OBJECT-TYPE
SYNTAX INTEGER {
off(1),
on(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies whether to authenticate with the ntp time server."
::= { networkTimeGroup 7 }
timeSntpKeyID OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the key ID to use for host 1 during server authentication."
::= { networkTimeGroup 8 }
timeSntpKeyID2 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the key ID to use for host 2 during server authentication."
::= { networkTimeGroup 9 }
--
-- end of networkTimeGroup
--
--
-- end of mgtDateTimeGroup
--
--
-- mgtBootFilesGroup
--
mgtBootFilesGroup OBJECT IDENTIFIER ::= { mgtFilesGroup 1 }
bootFileStatus OBJECT-TYPE
SYNTAX ContainerStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When you perform a GET on this variable, one of
the following values will be returned:
1-Indicates that the container folder is active with no changes.
2-Indicates that the container folder is active with change(s).
Once you have completed setting the variables in a folder, you
will want to submit your changes to the management module. To do
this, set the Status variable to 4. If you want to discard the
changes, set the Status variable to 6.
4-Indicates that the changes in the container folder are to be
submitted to the management module and verified. To save the
changes to flash a write of writeToFlash(1) in the adminFunction
object is required.
6-Indicates that the changes in the container folder are to be
discarded."
::= { mgtBootFilesGroup 1}
fileFirmwareHost OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..46))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The host name or IP address of the server that contains the firmware file.
If you use a host name, it must exist in the management module's host table
or be resolved by DNS."
::= { mgtBootFilesGroup 2}
fileFirmwareName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The path and file name (do not use a drive letter), relative to the default
path of your TFTP server software, of the update software for the management
module that will be loaded when the management module is rebooted."
::= { mgtBootFilesGroup 3}
fileConfigurationHost OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..46))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The host name or IP address of the server that contains the configuration file.
If you use a host name, it must exist in the management module's host table
or be resolved by DNS."
::= { mgtBootFilesGroup 4}
fileConfigurationName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The path and file name (do not use a drive letter), relative to the default
path of your TFTP server software, of the new configuration file for the Device
Server that will be loaded when the management module is rebooted."
::= { mgtBootFilesGroup 5}
--
-- end of mgtBootFilesGroup
--
--
-- mgtfirmwareUpdatesGroup
--
mgtfirmwareUpdatesGroup OBJECT IDENTIFIER ::= { mgtFilesGroup 2 }
firmwareUpdateStatus OBJECT-TYPE
SYNTAX ContainerStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When you perform a GET on this variable, one of
the following values will be returned:
1-Indicates that the container folder is active with no changes.
2-Indicates that the container folder is active with change(s).
Once you have completed setting the variables in a folder, you
will want to submit your changes to the management module. To do
this, set the Status variable to 4. If you want to discard the
changes, set the Status variable to 6.
4-Indicates that the changes in the container folder are to be
submitted to the management module and verified. To save the
changes to flash a write of writeToFlash(1) in the adminFunction
object is required.
6-Indicates that the changes in the container folder are to be
discarded."
::= { mgtfirmwareUpdatesGroup 1}
firmwareUpdateAuto OBJECT-TYPE
SYNTAX OnOffValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable automatic updates of installed media converter modules from firmware
bundle on management module.."
::= { mgtfirmwareUpdatesGroup 2}
firmwareUpdateBundleVersionCm100 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the bundled firmware version for CM-100 modules."
::= { mgtfirmwareUpdatesGroup 3 }
firmwareUpdateBundleVersionCm110 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the bundled firmware version for CM-110 modules."
::= { mgtfirmwareUpdatesGroup 4 }
firmwareUpdateBundleVersionCm1000OrCm1000Sfp OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the bundled firmware version for CM-1000 or CM-1000-SFP modules."
::= { mgtfirmwareUpdatesGroup 5 }
firmwareUpdateBundleVersionCm1110 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the bundled firmware version for CM-1110 modules."
::= { mgtfirmwareUpdatesGroup 6 }
firmwareUpdateBundleVersionCm1110Sfp OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the bundled firmware version for CM-1110-SFP modules."
::= { mgtfirmwareUpdatesGroup 7 }
firmwareUpdateBundleVersionCm100mm OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the bundled firmware version for CM-100MM modules."
::= { mgtfirmwareUpdatesGroup 8 }
firmwareUpdateBundleVersionCm1000mm OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the bundled firmware version for CM-1000MM modules."
::= { mgtfirmwareUpdatesGroup 9 }
firmwareUpdateBundleVersionCm10g OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the bundled firmware version for CM-10G modules."
::= { mgtfirmwareUpdatesGroup 10 }
--
-- end of mgtfirmwareUpdatesGroup
--
--------------------------------------------------------------------------------
-- nettxfrTable
--
nettxfrTable OBJECT-TYPE
SYNTAX SEQUENCE OF NettxfrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of snmp file transfer sessions."
::= { mgtFilesGroup 3 }
nettxfrEntry OBJECT-TYPE
SYNTAX NettxfrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of the table, each relating to a SNMP file transfer session. "
INDEX { nettxfrSessionID }
::= { nettxfrTable 1 }
NettxfrEntry ::=
SEQUENCE {
nettxfrSessionID Unsigned32,
nettxfrStatus INTEGER,
nettxfrDirection INTEGER,
nettxfrFileType INTEGER,
nettxfrFileHost DisplayString,
nettxfrFileName DisplayString,
nettxfrMCSlotNumber SlotNumber,
nettxfrUserName DisplayString,
nettxfrSSHKeyType INTEGER,
nettxfrSSLType INTEGER,
nettxfrSessionInUse INTEGER,
nettxfrTftpPort Unsigned32
}
nettxfrSessionID OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This indicates if the net transfer is to be loaded to the management
module or saved from the management module."
::= { nettxfrEntry 1}
nettxfrStatus OBJECT-TYPE
SYNTAX INTEGER {
fileNotFound(-3),
busy(-2),
error(-1),
idle(0),
start(1),
transferringFile(2),
erassingFlash(3),
programmingFlash(4),
verifyingFlash(5),
moduleReset(6),
processingScriptFile(7),
finished(8)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This field indicates the status of the nettxfr process.
A value of start(1) should be written to this field to start the nettxfr
process with the specified parameters in the rest of this group."
::= { nettxfrEntry 2}
nettxfrDirection OBJECT-TYPE
SYNTAX INTEGER {
load(0),
save(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This indicates if the net transfer is to be loaded to the management
module or saved from the management module."
::= { nettxfrEntry 3}
nettxfrFileType OBJECT-TYPE
SYNTAX INTEGER {
configuration(0),
firmware(1),
media-converter(2),
script(3),
serialt-buf(4),
ssh-server(5),
ssl(6),
text-config(7),
diagnostic-file(8),
sntp-keys(9)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This indicates the type of file to be transfered to/from the management module."
::= { nettxfrEntry 4}
nettxfrFileHost OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..46))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The host name or IP address of the server that contains the file to be
transfered to/from the management module..
If you use a host name, it must exist in the management module's host table
or be resolved by DNS."
::= { nettxfrEntry 5}
nettxfrFileName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The path and file name (do not use a drive letter), relative to the default
path of your TFTP server software, of the file to be transfered to/from the
management module."
::= { nettxfrEntry 6}
nettxfrMCSlotNumber OBJECT-TYPE
SYNTAX SlotNumber
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the slot number of the Media Converter Module to which the
firmware will be transfered."
::= { nettxfrEntry 7}
nettxfrUserName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the user login name who owns the ssh public key that is to
be transfered to the management module."
::= { nettxfrEntry 8}
nettxfrSSHKeyType OBJECT-TYPE
SYNTAX INTEGER {
dsa(0),
rsa(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the authentication method used by the ssh-server public key
that is to be transfered to/from the management module"
::= { nettxfrEntry 9}
nettxfrSSLType OBJECT-TYPE
SYNTAX INTEGER {
ca-list(0),
certificate(1),
private-key(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the type of SSL file to be transfered to the management module.
These files are needed if you are using the secure version of the
WebManager (HTTPS), or LDAP authentication with TLS."
::= { nettxfrEntry 10}
nettxfrSessionInUse OBJECT-TYPE
SYNTAX INTEGER {
idle(0),
in-use(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies whether this net transfer session entry is in use. If a
manager tries to write a 1 to this field and the session is already
in use, then an error is returned."
::= { nettxfrEntry 11}
nettxfrTftpPort OBJECT-TYPE
SYNTAX Unsigned32(1..65536)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies a UDP port number for the TFTP host server.
Default is 69. "
::= { nettxfrEntry 12}
-- end of nettxfrTable
--------------------------------------------------------------------------------
--
-- mgtAdminGroup
--
adminFunction OBJECT-TYPE
SYNTAX INTEGER {
writeToFlash(1),
resetToFactoryDefaults(2),
reboot(3),
resetSecurIDNodeSecret(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Perform a specific function on the management module.
If you want to save all the changes that have been
submitted to the management module, you need to expand
the adminGroup container folder and SET the adminFunction
to 1 to write to FLASH. To make the configuration
changes take effect, SET the adminFunction to 3 to
reboot the management module."
::= {mgtAdminGroup 1 }
adminLastFunction OBJECT-TYPE
SYNTAX INTEGER {
writeToFlash(1),
resetToFactoryDefaults(2),
reboot(3),
resetSecurIDNodeSecret(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last function requested"
::= {mgtAdminGroup 2 }
adminStatus OBJECT-TYPE
SYNTAX INTEGER {
successful(0),
error(1),
inProgress(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the last function performed."
::= {mgtAdminGroup 3 }
adminbootReason OBJECT-TYPE
SYNTAX BITS {
bootCrash(29),
bootWarmStart(30),
bootNormal(31)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The reason(s) why the management module last rebooted."
::= { mgtAdminGroup 4 }
adminDiagFileAvailable OBJECT-TYPE
SYNTAX YesNoValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates that a diagnostic file is available. "
::= { mgtAdminGroup 5 }
-- end of mgtAdminGroup
--
--
-- mgtDisplayFormatGroup
--
displayFormatStatus OBJECT-TYPE
SYNTAX ContainerStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When you perform a GET on this variable, one of
the following values will be returned:
1-Indicates that the container folder is active with no changes.
2-Indicates that the container folder is active with change(s).
Once you have completed setting the variables in a folder, you
will want to submit your changes to the management module. To do
this, set the Status variable to 4. If you want to discard the
changes, set the Status variable to 6.
4-Indicates that the changes in the container folder are to be
submitted to the management module and verified. To save the
changes to flash a write of writeToFlash(1) in the adminFunction
object is required.
6-Indicates that the changes in the container folder are to be
discarded."
::= { mgtDisplayFormatGroup 1}
cfgTemperatureUnits OBJECT-TYPE
SYNTAX INTEGER {
celsius(0),
fahrenheit(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the units to display any internally measured
temperature. The units can be Celsius or Fahrenheit."
::= { mgtDisplayFormatGroup 2 }
cfgSfpPowerUnits OBJECT-TYPE
SYNTAX INTEGER {
milliwats(0),
decibelmilliwatts(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the units to display any SFP DMI internally
measured transmit/receive power. The units can be milliwatts (mW) or
Decibel milliwatts (dBm)."
::= { mgtDisplayFormatGroup 3 }
cfgTimeFormat OBJECT-TYPE
SYNTAX INTEGER {
time12HourFmt(0),
time24HourFmt(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the format to display the time."
::= { mgtDisplayFormatGroup 4 }
cfgDateFormat OBJECT-TYPE
SYNTAX INTEGER {
dateMonthDayYearFmt(0),
dateDayMonthYearFmt(1),
dateYearMonthDayFmt(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the format to display date."
::= { mgtDisplayFormatGroup 5 }
--
-- end of mgtDisplayFormatGroup
--
--
-- mgtChassisCfgGroup
--
--
-- mgtChassisSlotPowerScheduleTable
--
mgtChassisSlotPowerScheduleTable OBJECT-TYPE
SYNTAX SEQUENCE OF MgtChassisSlotPowerScheduleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of power schedule configuration for chassis slots.
(Not applicable to 2-slot chassis.)"
::= { mgtChassisCfgGroup 1 }
mgtChassisSlotPowerScheduleEntry OBJECT-TYPE
SYNTAX MgtChassisSlotPowerScheduleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of the table, each relating to a separate slot in a chassis."
INDEX { mcrChassisIndex, powerSchedSlotIndex, powerSchedDayOfWeek }
::= { mgtChassisSlotPowerScheduleTable 1 }
MgtChassisSlotPowerScheduleEntry ::=
SEQUENCE {
powerSchedSlotIndex SlotNumber,
powerSchedDayOfWeek INTEGER,
powerSchedConifgStatus ContainerStatus,
powerSchedOnHour INTEGER,
powerSchedOnMinute INTEGER,
powerSchedOffHour INTEGER,
powerSchedOffMinute INTEGER
}
powerSchedSlotIndex OBJECT-TYPE
SYNTAX SlotNumber
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies the chassis slot number."
::= { mgtChassisSlotPowerScheduleEntry 2 }
powerSchedDayOfWeek OBJECT-TYPE
SYNTAX INTEGER {
sunday(1),
monday(2),
tuesday(3),
wednesday(4),
thursday(5),
friday(6),
saturday(7)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies the day of the week."
::= { mgtChassisSlotPowerScheduleEntry 3 }
powerSchedConifgStatus OBJECT-TYPE
SYNTAX ContainerStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When you perform a GET on this variable, one of
the following values will be returned:
1-Indicates that the container folder is active with no changes.
2-Indicates that the container folder is active with change(s).
Once you have completed setting the variables in a folder, you
will want to submit your changes to the management module. To do
this, set the Status variable to 4. If you want to discard the
changes, set the Status variable to 6.
4-Indicates that the changes in the container folder are to be
submitted to the management module and verified. To save the
changes to flash a write of writeToFlash(1) in the adminFunction
object is required.
6-Indicates that the changes in the container folder are to be
discarded."
::= { mgtChassisSlotPowerScheduleEntry 4 }
powerSchedOnHour OBJECT-TYPE
SYNTAX INTEGER (0..23)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the hour (0-23) of the day to schedule a
power on of the chassis slot"
::= { mgtChassisSlotPowerScheduleEntry 5 }
powerSchedOnMinute OBJECT-TYPE
SYNTAX INTEGER (0..59)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the minute (0-59) of the hour to schedule a
power on of the chassis slot"
::= { mgtChassisSlotPowerScheduleEntry 6 }
powerSchedOffHour OBJECT-TYPE
SYNTAX INTEGER (0..23)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the hour (0-23) of the day to schedule a
power off of the chassis slot"
::= { mgtChassisSlotPowerScheduleEntry 7 }
powerSchedOffMinute OBJECT-TYPE
SYNTAX INTEGER (0..59)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the minute (0-59) of the hour to schedule a
power off of the chassis slot"
::= { mgtChassisSlotPowerScheduleEntry 8 }
--
-- end of mgtChassisSlotPowerScheduleTable
--
-- end of mgtChassisCfgGroup
--
--
-- end of mcrManagementGroup
--
--
-- end of mcrMIBObjects
--
--
-- mcrMGTMIBNotifications ***************************************
--
mcrMgtModuleInserted NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrModuleModelName, mcrModuleSerialNumber}
STATUS current
DESCRIPTION
"Trap being sent indicates that a management module has been inserted int the chassis."
::= { mcrMGTMIBNotifications 1 }
mcrMgtSystemBoot NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, adminbootReason}
STATUS current
DESCRIPTION
"Trap being sent indicates that the management module's system firmware is
being booted up and has completed system initialization. In some case this alert
will indicate a cold start like a user resetting the management module or
warm start if the module automatically resets because of a detected crash."
::= { mcrMGTMIBNotifications 2 }
mcrMgtReset NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel}
STATUS current
DESCRIPTION
"Trap being sent indicates that the management module has been manually reset
via the reset button or one of the managers."
::= { mcrMGTMIBNotifications 3 }
mcrMgtResetFactory NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel}
STATUS current
DESCRIPTION
"Trap being sent indicates that the management module has been manually reset
to factory by holding the reset button for 3 or more seconds, or one of the
managers. This means that any files downloaded to the management module will
be erase and the management configuration file is reset back to the default
configuration. "
::= { mcrMGTMIBNotifications 4 }
mcrMgtEtheLinkUp NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel }
STATUS current
DESCRIPTION
"Trap being sent indicates that the current link status of the Ethernet
port on the management module is up. "
::= { mcrMGTMIBNotifications 5 }
mcrMgtEtheLinkDown NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel }
STATUS current
DESCRIPTION
"Trap being sent indicates that the current link status of the Ethernet
port on the management module is down."
::= { mcrMGTMIBNotifications 6 }
mcrMgtConMonDSRSigChg NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrMgtConsoleDSR}
STATUS current
DESCRIPTION
"Trap being sent indicates that monitor console DSR is configured and the
status of one of these signal has changed on the console port. "
::= { mcrMGTMIBNotifications 7 }
mcrMgtAuthFail NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mgtAccessMethod, remoteMgtIpAddress }
STATUS current
DESCRIPTION
"Trap being sent indicates that a user failed authentication via Telnet, SSH,
WebManager, SNMP or the serial console."
::= { mcrMGTMIBNotifications 8 }
mcrMgtAuthSuccess NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mgtAccessMethod, remoteMgtIpAddress }
STATUS current
DESCRIPTION
"Trap being sent indicates that a user failed authentication via Telnet, SSH,
WebManager or the serial console. "
::= { mcrMGTMIBNotifications 9 }
mcrMgtDateTimeChg NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, systemDateTimeAndOffset }
STATUS current
DESCRIPTION
"Trap being sent indicates that the system date and/or time has been changed. "
::= { mcrMGTMIBNotifications 10 }
mcrMgtSntpServFail NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, timeSntpHost1, timeSntpHost2 }
STATUS current
DESCRIPTION
"Trap being sent indicates that SNTP is configured and the management module can
not communicate with the configured SNTP server. "
::= { mcrMGTMIBNotifications 11 }
mcrMgtSntpServRec NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, timeSntpHost1, timeSntpHost2 }
STATUS current
DESCRIPTION
"Trap being sent indicates that the SNTP is configured and the management module
has recovered communications with the configured SNTP server."
::= { mcrMGTMIBNotifications 12 }
mcrMgtSnmpTrapHostFail NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, snmpTrapHostIndex, snmpTrapHostIpAddress }
STATUS current
DESCRIPTION
"Trap being sent indicates that SNMP traps is and the management module
can not communicate with the configured SNMP trap host. This trap will only be
sent for SNMP trap hosts configured for 'Inform' type traps. "
::= { mcrMGTMIBNotifications 13 }
mcrMgtSnmpTrapHostRec NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, snmpTrapHostIndex, snmpTrapHostIpAddress }
STATUS current
DESCRIPTION
"Trap being sent indicates that SNMP traps is and the management module
has recovered communications with the configured SNMP trap host."
::= { mcrMGTMIBNotifications 14 }
mcrMgtEmailServFail NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, emailSMTPHost }
STATUS current
DESCRIPTION
"Trap being sent indicates that an alert email server is configured and the management
module can not communicate with the configured email server. "
::= { mcrMGTMIBNotifications 15 }
mcrMgtEmailServRec NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, emailSMTPHost }
STATUS current
DESCRIPTION
"Trap being sent indicates that an alert email server is configured and the management
module has recovered communications with the configured email server."
::= { mcrMGTMIBNotifications 16 }
mcrMgtConfSavedFlash NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel }
STATUS current
DESCRIPTION
"Trap being sent indicates that the configuration has been saved to flash on the
management module. "
::= { mcrMGTMIBNotifications 17 }
mcrMgtIpAddrDynChg NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, networkIpAddress }
STATUS current
DESCRIPTION
"Trap being sent indicates that the system IP address has been dynamically
changed. "
::= { mcrMGTMIBNotifications 18 }
mcrMgtTftpUploadFail NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, remoteTftpFileName, remoteTftpHost }
STATUS current
DESCRIPTION
"Trap being sent indicates that an attempt to transfer a file via TFTP, off the
management module to a remote host has failed. "
::= { mcrMGTMIBNotifications 19 }
mcrMgtTftpUploadSuccess NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, remoteTftpFileName, remoteTftpHost }
STATUS current
DESCRIPTION
"Trap being sent indicates that an attempt to transfer a file via TFTP, off the
management module to a remote host was successful. "
::= { mcrMGTMIBNotifications 20 }
mcrMgtTftpDownloadFail NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, remoteTftpFileName, remoteTftpHost }
STATUS current
DESCRIPTION
"Trap being sent indicates that an attempt to transfer a file via TFTP, from a
remote host to the management module has failed."
::= { mcrMGTMIBNotifications 21 }
mcrMgtTftpDownloadSuccess NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, remoteTftpFileName, remoteTftpHost }
STATUS current
DESCRIPTION
"Trap being sent indicates that an attempt to transfer a file via TFTP, from a
remote host to the management module was successful. "
::= { mcrMGTMIBNotifications 22 }
mcrMgtChassisMismatch NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel }
STATUS current
DESCRIPTION
"Trap being sent indicates that the management module has been inserted into a
chassis that does not match it's Backup media converter module configuration. Backup media
module configurations will be reset to factory default. "
::= { mcrMGTMIBNotifications 23 }
-- Possible future release
mcrChassisAdd NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, chassisModelName,
chassisSerialNumber }
STATUS current
DESCRIPTION
"Trap being sent indicates that a new chassis as been added to the chain of chassis. "
::= { mcrMGTMIBNotifications 24 }
-- Possible future release
mcrChassisRemove NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex }
STATUS current
DESCRIPTION
"Trap being sent indicates that that a chassis has been removed from the chain of
chassis. "
::= { mcrMGTMIBNotifications 25 }
mcrChassisReset NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex }
STATUS current
DESCRIPTION
"Trap being sent indicates that the chassis back-plane has been manually reset by
a user managing the unit. "
::= { mcrMGTMIBNotifications 26 }
mcrChassisTemperatureAlarm NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, cfgTemperatureUnits, mcrChassisIndex,
chassisTemperature, chassisCfgHighTempThreshold}
STATUS current
DESCRIPTION
"Trap being sent indicates that the chassis temperature has exceeded the configured
high temperature threshold temperature. "
::= { mcrMGTMIBNotifications 27 }
mcrChassisTemperatureRecover NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, cfgTemperatureUnits, mcrChassisIndex, chassisTemperature }
STATUS current
DESCRIPTION
"Trap being sent indicates that the chassis temperature has recovered back to
normal operating temperature. "
::= { mcrMGTMIBNotifications 28 }
mcrChassisSlotPoweredOn NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrModuleModelName, mcrModuleSerialNumber, mcrUserDefinedModuleName }
STATUS current
DESCRIPTION
"Trap being sent indicates that the chassis slot has been powered off either manually
or through the configured chassis slot power schedule. "
::= { mcrMGTMIBNotifications 29 }
mcrChassisSlotPoweredOff NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex }
STATUS current
DESCRIPTION
"Trap being sent indicates that the chassis slot has been powered on either manually
or through the configured chassis slot power schedule. "
::= { mcrMGTMIBNotifications 30 }
mcrChassisFail NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex }
STATUS current
DESCRIPTION
"Trap being sent indicates that the management module has detected a failure
condition in the chassis. "
::= { mcrMGTMIBNotifications 31 }
mcrChassisOk NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex }
STATUS current
DESCRIPTION
"Trap being sent indicates that the chassis has recovered from a failure
and is now operating normally."
::= { mcrMGTMIBNotifications 32 }
mcrPsmuInserted NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrPsmuIndex, mcrPsmuModelName }
STATUS current
DESCRIPTION
"Trap being sent indicates that a power supply has been inserted into the chassis."
::= { mcrMGTMIBNotifications 33 }
mcrPsmuRemoved NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrPsmuIndex }
STATUS current
DESCRIPTION
"Trap being sent indicates that a power supply's has been removed from the chassis."
::= { mcrMGTMIBNotifications 34 }
mcrPsmuPsuFail NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrPsmuIndex, mcrPsmuPsuStatus }
STATUS current
DESCRIPTION
"Trap being sent indicates that the power supply has failed it's self-test
diagnostics. "
::= { mcrMGTMIBNotifications 35 }
mcrPsmuPsuOk NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrPsmuIndex }
STATUS current
DESCRIPTION
"Trap being sent indicates that the power supply has passed it's self-test
diagnostics. "
::= { mcrMGTMIBNotifications 36 }
mcrPsmuPsuVoltageFail NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrPsmuIndex }
STATUS current
DESCRIPTION
"Trap being sent indicates that the voltage being supplied by the indicated
power supply is insufficient."
::= { mcrMGTMIBNotifications 37 }
mcrPsmuPsuVoltageOk NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrPsmuIndex}
STATUS current
DESCRIPTION
"Trap being sent indicates that the voltage being supplied by the indicated
power supply is now in the normal operating range."
::= { mcrMGTMIBNotifications 38 }
mcrPsmuFanFail NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrPsmuIndex }
STATUS current
DESCRIPTION
"Trap being sent indicates that the fan has failed. "
::= { mcrMGTMIBNotifications 39 }
mcrPsmuFanOk NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrPsmuIndex }
STATUS current
DESCRIPTION
"Trap being sent indicates that the fan currently operating normally. "
::= { mcrMGTMIBNotifications 40 }
-- currently not used
-- ::= { mcrMGTMIBNotifications 41 }
mcrMediaInserted NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrModuleModelName, mcrModuleSerialNumber, mcrUserDefinedModuleName }
STATUS current
DESCRIPTION
"Trap being sent indicates that a media converter module has been inserted into the chassis. "
::= { mcrMGTMIBNotifications 42 }
mcrMediaRemoved NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName }
STATUS current
DESCRIPTION
"Trap being sent indicates that a media converter module has been removed from the chassis. "
::= { mcrMGTMIBNotifications 43 }
mcrMediaReset NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName }
STATUS current
DESCRIPTION
"Trap being sent indicates that the media converter module has been manually reset by a user
managing the unit. "
::= { mcrMGTMIBNotifications 44 }
mcrMediaLostCommunication NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName }
STATUS current
DESCRIPTION
"Trap being sent indicates that the management module can no longer communicate
with the media converter module "
::= { mcrMGTMIBNotifications 45 }
mcrMediaRecovCommunication NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName }
STATUS current
DESCRIPTION
"Trap being sent indicates that the management module recovered communication
with a media converter module "
::= { mcrMGTMIBNotifications 46 }
mcrMediaFail NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, mcrModuleDiagStatus }
STATUS current
DESCRIPTION
"Trap being sent indicates that the media converter module has failed its self-test
diagnostics "
::= { mcrMGTMIBNotifications 47 }
mcrMediaOk NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName }
STATUS current
DESCRIPTION
"Trap being sent indicates that the media converter module has passed its self-test
diagnostics "
::= { mcrMGTMIBNotifications 48 }
mcrMediaLinkUp NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, mcrMediaPortNum, mcrMediaPortDescr}
STATUS current
DESCRIPTION
"Trap being sent indicates that the current link status of the Fiber or Copper
port on the media converter module is up."
::= { mcrMGTMIBNotifications 49 }
mcrMediaLinkDown NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, mcrMediaPortNum, mcrMediaPortDescr }
STATUS current
DESCRIPTION
"Trap being sent indicates that the current link status of the Fiber or Copper
port on the media converter module is down. "
::= { mcrMGTMIBNotifications 50 }
mcrMediaConfUpdateFail NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName }
STATUS current
DESCRIPTION
"Trap being sent indicates that the configuration update on the media converter module
has failed."
::= { mcrMGTMIBNotifications 51 }
mcrMediaConfUpdateSuccess NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName }
STATUS current
DESCRIPTION
"Trap being sent indicates that the configuration update on the media converter module
was successful. The media converter module configuration can be updated manually or automatically. "
::= { mcrMGTMIBNotifications 52 }
mcrMediaConfMismatch NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, mcrModuleTypeInserted, mcrMediaBackedupModuleType,
mcrModuleSubTypeInserted,mcrMediaBackedupModuleSubType }
STATUS current
DESCRIPTION
"Trap being sent indicates that a chassis slot is configured with Backup/Restore
and the media converter module type configured for the slot does not match the media converter module
type inserted into the slot. "
::= { mcrMGTMIBNotifications 53 }
mcrMediaConfMismatchResolv NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, mcrModuleTypeInserted, mcrMediaBackedupModuleType,
mcrModuleSubTypeInserted,mcrMediaBackedupModuleSubType }
STATUS current
DESCRIPTION
"Trap being sent indicates that a user has taken action to resolved media converter module
configuration mismatch "
::= { mcrMGTMIBNotifications 54 }
mcrMediaFirmwareUpdateFail NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, mcrModuleModelName }
STATUS current
DESCRIPTION
"Trap being sent indicates that an attempt to update a media converter module's firmware has Failed. "
::= { mcrMGTMIBNotifications 55 }
mcrMediaFirmwareUpdateSuccess NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, mcrModuleModelName }
STATUS current
DESCRIPTION
"Trap being sent indicates that an attempt to update a media converter module's firmware was successful. "
::= { mcrMGTMIBNotifications 56 }
mcrSfpInserted NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName }
STATUS current
DESCRIPTION
"Trap being sent indicates that a SFP module has been inserted into a media converter module"
::= { mcrMGTMIBNotifications 57 }
mcrSfpRemoved NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName }
STATUS current
DESCRIPTION
"Trap being sent indicates that a SFP module has been removed from a media converter module "
::= { mcrMGTMIBNotifications 58 }
mcrSfpHighTempWarn NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, cfgTemperatureUnits, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, sfpDmiRealTimeTemp, sfpDmiHighTempWarn, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that a SFP module's temperature has exceeded the high
temperature warning threshold. "
::= { mcrMGTMIBNotifications 59 }
mcrSfpHighTempWarnRecov NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, cfgTemperatureUnits, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, sfpDmiRealTimeTemp, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that a SFP module's temperature has recovered to normal
operating level. "
::= { mcrMGTMIBNotifications 60 }
mcrSfpHighTempAlarm NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, cfgTemperatureUnits, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, sfpDmiRealTimeTemp, sfpDmiHighTempAlarm, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that a SFP module's temperature has exceeded the high
temperature alarm threshold. "
::= { mcrMGTMIBNotifications 61 }
mcrSfpHighTempAlarmRecov NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, cfgTemperatureUnits, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, sfpDmiRealTimeTemp, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that a SFP module's temperature has recovered to normal
operating level. "
::= { mcrMGTMIBNotifications 62 }
mcrSfpLowTempWarn NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, cfgTemperatureUnits, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, sfpDmiRealTimeTemp, sfpDmiLowTempWarn, mcrMediaPortNum}
STATUS current
DESCRIPTION
"Trap being sent indicates that a SFP module's temperature has gone below the low
temperature warning threshold. "
::= { mcrMGTMIBNotifications 63 }
mcrSfpLowTempWarnRecov NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, cfgTemperatureUnits, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, sfpDmiRealTimeTemp, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that a SFP module's temperature has recovered to normal
operating level. "
::= { mcrMGTMIBNotifications 64 }
mcrSfpLowTempAlarm NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, cfgTemperatureUnits, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName,sfpDmiRealTimeTemp, sfpDmiLowTempAlarm, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that a SFP module's temperature has gone below the low
temperature alarm threshold. "
::= { mcrMGTMIBNotifications 65 }
mcrSfpLowTempAlarmRecov NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, cfgTemperatureUnits, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, sfpDmiRealTimeTemp, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that a SFP module's temperature has recovered to normal
operating level. "
::= { mcrMGTMIBNotifications 66 }
mcrSfpHighVoltWarn NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, sfpDmiRealTimeVolt, sfpDmiHighVoltWarn, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that a SFP module's voltage has exceeded the high
voltage warning threshold. "
::= { mcrMGTMIBNotifications 67 }
mcrSfpHighVoltWarnRecov NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, sfpDmiRealTimeVolt, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that a SFP module's voltage has recovered to normal
operating level. "
::= { mcrMGTMIBNotifications 68 }
mcrSfpHighVoltAlarm NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, sfpDmiRealTimeVolt, sfpDmiHighVoltAlarm, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that a SFP module's voltage has exceeded the high
voltage alarm threshold. "
::= { mcrMGTMIBNotifications 69 }
mcrSfpHighVoltAlarmRecov NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, sfpDmiRealTimeVolt, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that a SFP module's voltage has recovered to normal
operating level. "
::= { mcrMGTMIBNotifications 70 }
mcrSfpLowVoltWarn NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, sfpDmiRealTimeVolt, sfpDmiLowVoltWarn, mcrMediaPortNum}
STATUS current
DESCRIPTION
"Trap being sent indicates that a SFP module's voltage has gone below the low
voltage warning threshold. "
::= { mcrMGTMIBNotifications 71 }
mcrSfpLowVoltWarnRecov NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, sfpDmiRealTimeVolt, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that a SFP module's voltage has recovered to normal
operating level. "
::= { mcrMGTMIBNotifications 72 }
mcrSfpLowVoltAlarm NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, sfpDmiRealTimeVolt, sfpDmiLowVoltAlarm, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that a SFP module's voltage has gone below the low
voltage alarm threshold. "
::= { mcrMGTMIBNotifications 73 }
mcrSfpLowVoltAlarmRecov NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, sfpDmiRealTimeVolt, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that a SFP module's voltage has recovered to normal
operating level. "
::= { mcrMGTMIBNotifications 74 }
mcrSfpHighTxBiasWarn NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, sfpDmiRealTimeTxBias, sfpDmiHighTxBiasWarn, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that a SFP module's TX Bias current has exceeded the high
TX Bias current warning threshold. "
::= { mcrMGTMIBNotifications 75 }
mcrSfpHighTxBiasWarnRecov NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, sfpDmiRealTimeTxBias, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that a SFP module's TX Bias current has recovered to normal
operating level. "
::= { mcrMGTMIBNotifications 76 }
mcrSfpHighTxBiasAlarm NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, sfpDmiRealTimeTxBias, sfpDmiHighTxBiasAlarm, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that a SFP module's TX Bias current has exceeded the high
TX Bias current alarm threshold. "
::= { mcrMGTMIBNotifications 77 }
mcrSfpHighTxBiasAlarmRecov NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, sfpDmiRealTimeTxBias, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that a SFP module's TX Bias current has recovered to normal
operating level. "
::= { mcrMGTMIBNotifications 78 }
mcrSfpLowTxBiasWarn NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, sfpDmiRealTimeTxBias, sfpDmiLowTxBiasWarn, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that a SFP module's TX Bias current has gone below the low
Tx Bias current warning threshold. "
::= { mcrMGTMIBNotifications 79 }
mcrSfpLowTxBiasWarnRecov NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, sfpDmiRealTimeTxBias, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that a SFP module's TX Bias current has recovered to normal
operating level. "
::= { mcrMGTMIBNotifications 80 }
mcrSfpLowTxBiasAlarm NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, sfpDmiRealTimeTxBias, sfpDmiLowTxBiasAlarm, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that a SFP module's TX Bias current has gone below the low
Tx Bias current alarm threshold. "
::= { mcrMGTMIBNotifications 81 }
mcrSfpLowTxBiasAlarmRecov NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, sfpDmiRealTimeTxBias, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that a SFP module's TX Bias current has recovered to normal
operating level. "
::= { mcrMGTMIBNotifications 82 }
mcrSfpHighTxPowerWarn NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, cfgSfpPowerUnits, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, sfpDmiRealTimeTxPower, sfpDmiHighTxPowerWarn, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that a SFP module's TX power has exceeded the high
TX power warning threshold. "
::= { mcrMGTMIBNotifications 83 }
mcrSfpHighTxPowerWarnRecov NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, cfgSfpPowerUnits, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, sfpDmiRealTimeTxPower, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that a SFP module's TX power has recovered to normal
operating level. "
::= { mcrMGTMIBNotifications 84 }
mcrSfpHighTxPowerAlarm NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, cfgSfpPowerUnits, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, sfpDmiRealTimeTxPower, sfpDmiHighTxPowerAlarm, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that a SFP module's TX power has exceeded the high
TX power alarm threshold. "
::= { mcrMGTMIBNotifications 85 }
mcrSfpHighTxPowerAlarmRecov NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, cfgSfpPowerUnits, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, sfpDmiRealTimeTxPower, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that a SFP module's TX power has recovered to normal
operating level. "
::= { mcrMGTMIBNotifications 86 }
mcrSfpLowTxPowerWarn NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, cfgSfpPowerUnits,mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, sfpDmiRealTimeTxPower, sfpDmiLowTxPowerWarn, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that a SFP module's TX power has gone below the low
TX power warning threshold. "
::= { mcrMGTMIBNotifications 87 }
mcrSfpLowTxPowerWarnRecov NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel,cfgSfpPowerUnits, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, sfpDmiRealTimeTxPower, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that a SFP module's TX power has recovered to normal
operating level. "
::= { mcrMGTMIBNotifications 88 }
mcrSfpLowTxPowerAlarm NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, cfgSfpPowerUnits, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, sfpDmiRealTimeTxPower, sfpDmiLowTxPowerAlarm, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that a SFP module's TX power has gone below the low
TX power alarm threshold. "
::= { mcrMGTMIBNotifications 89 }
mcrSfpLowTxPowerAlarmRecov NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel,cfgSfpPowerUnits, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, sfpDmiRealTimeTxPower, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that a SFP module's TX power has recovered to normal
operating level. "
::= { mcrMGTMIBNotifications 90 }
---*****************************************************************************
mcrSfpHighRxPowerWarn NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, cfgSfpPowerUnits, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, sfpDmiRealTimeRxPower, sfpDmiHighRxPowerWarn, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that a SFP module's RX power has exceeded the high
RX power warning threshold. "
::= { mcrMGTMIBNotifications 91 }
mcrSfpHighRxPowerWarnRecov NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, cfgSfpPowerUnits, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, sfpDmiRealTimeRxPower, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that a SFP module's RX power has recovered to normal
operating level. "
::= { mcrMGTMIBNotifications 92 }
mcrSfpHighRxPowerAlarm NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, cfgSfpPowerUnits, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, sfpDmiRealTimeRxPower, sfpDmiHighRxPowerAlarm, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that a SFP module's RX power has exceeded the high
RX power alarm threshold. "
::= { mcrMGTMIBNotifications 93 }
mcrSfpHighRxPowerAlarmRecov NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, cfgSfpPowerUnits, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, sfpDmiRealTimeRxPower, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that a SFP module's RX power has recovered to normal
operating level. "
::= { mcrMGTMIBNotifications 94 }
mcrSfpLowRxPowerWarn NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, cfgSfpPowerUnits, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, sfpDmiRealTimeRxPower, sfpDmiLowRxPowerWarn, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that a SFP module's RX power has gone below the low
RX power warning threshold. "
::= { mcrMGTMIBNotifications 95 }
mcrSfpLowRxPowerWarnRecov NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, cfgSfpPowerUnits, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, sfpDmiRealTimeRxPower, mcrMediaPortNum}
STATUS current
DESCRIPTION
"Trap being sent indicates that a SFP module's RX power has recovered to normal
operating level. "
::= { mcrMGTMIBNotifications 96 }
--
mcrSfpLowRxPowerAlarm NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, cfgSfpPowerUnits, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, sfpDmiRealTimeRxPower, sfpDmiLowRxPowerAlarm, mcrMediaPortNum}
STATUS current
DESCRIPTION
"Trap being sent indicates that a SFP module's RX power has gone below the low
RX power alarm threshold. "
::= { mcrMGTMIBNotifications 97 }
mcrSfpLowRxPowerAlarmRecov NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, cfgSfpPowerUnits, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, sfpDmiRealTimeRxPower, mcrMediaPortNum}
STATUS current
DESCRIPTION
"Trap being sent indicates that a SFP module's RX power has recovered to normal
operating level. "
::= { mcrMGTMIBNotifications 98 }
---*****************************************************************************
mcrChassisCommTempSensorFail NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex}
STATUS current
DESCRIPTION
"Trap being sent indicates that communication with the chassis temperature
sensor has failed. The current chassis temperature reading will be unknown"
::= { mcrMGTMIBNotifications 99 }
mcrChassisCommTempSensorRecov NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex}
STATUS current
DESCRIPTION
"Trap being sent indicates that communication with the chassis temperature
sensor has recovered."
::= { mcrMGTMIBNotifications 100 }
mcrMediaDetectFail NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,mcrUserDefinedModuleName }
STATUS current
DESCRIPTION
"Trap being sent indicates that the indicated media card is being powered
down due to the detection of a hardware failure."
::= { mcrMGTMIBNotifications 101 }
mcrMediaBadImage NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex, mcrUserDefinedModuleName }
STATUS current
DESCRIPTION
"Trap being sent indicates that the CRC of the media converter module firmware is
incorrect. This can be caused if there is no image on the module or the
image is corrupt."
::= { mcrMGTMIBNotifications 102 }
mcrSfpLostComm NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex, mcrUserDefinedModuleName }
STATUS current
DESCRIPTION
"Trap being sent indicates that the media converter module's microcode can no longer
communicate with the SFP module."
::= { mcrMGTMIBNotifications 103 }
mcrSfpRecovComm NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex, mcrUserDefinedModuleName}
STATUS current
DESCRIPTION
"Trap being sent indicates that the media converter module's microcode had previously
lost communication with, but has now regained communication with the SFP
module."
::= { mcrMGTMIBNotifications 104 }
mcrModuleNotSupported NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex, mcrUserDefinedModuleName}
STATUS current
DESCRIPTION
"Trap being sent indicates that the media converter module is not fully supported by
the management module. Update the management module firmware to rectify
this issue."
::= { mcrMGTMIBNotifications 105 }
mcrModuleFirmwareUpdate NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex, mcrUserDefinedModuleName}
STATUS current
DESCRIPTION
"Trap being sent indicates that the media converter module firmware is being updated."
::= { mcrMGTMIBNotifications 106 }
--- ****************************************************************************
mcrSfpPortShutdown NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex, mcrUserDefinedModuleName, mcrMediaPortNum}
STATUS current
DESCRIPTION
"Trap being sent indicates that the Sfp/Xfp port has been shutdown due to
high temperature."
::= { mcrMGTMIBNotifications 107 }
mcrSfpPortShutdownRecov NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex, mcrUserDefinedModuleName, mcrMediaPortNum}
STATUS current
DESCRIPTION
"Trap being sent indicates that the Sfp/Xfp port shutdown has recovered."
::= { mcrMGTMIBNotifications 108 }
--- ****************************************************************************
mcrXfpHighApdBiasWarn NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, xfpDmiHighAuxWarn, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's APD Bias Current has
exceeded the high APD Bias warning threshold. "
::= { mcrMGTMIBNotifications 109 }
mcrXfpHighApdBiasWarnRecov NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's APD Bias Current has
recovered to normal operating level."
::= { mcrMGTMIBNotifications 110 }
mcrXfpHighApdBiasAlarm NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, xfpDmiHighAuxAlarm, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's APD Bias Current has
exceeded the high APD Bias alarm threshold. "
::= { mcrMGTMIBNotifications 111 }
mcrXfpHighApdBiasAlarmRecov NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's APD Bias Current has
recovered to normal operating level. "
::= { mcrMGTMIBNotifications 112 }
mcrXfpLowApdBiasWarn NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, xfpDmiLowAuxWarn, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's APD Bias Current has gone
below the low APD Bias warning threshold. "
::= { mcrMGTMIBNotifications 113 }
mcrXfpLowApdBiasWarnRecov NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, mcrMediaPortNum}
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's APD Bias Current has
recovered to normal operating level. "
::= { mcrMGTMIBNotifications 114 }
--
mcrXfpLowApdBiasAlarm NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, xfpDmiLowAuxAlarm, mcrMediaPortNum}
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's APD Bias Current has gone
below the low APD Bias alarm threshold. "
::= { mcrMGTMIBNotifications 115}
mcrXfpLowApdBiasAlarmRecov NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, mcrMediaPortNum}
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's APD Bias Current has
recovered to normal operating level. "
::= { mcrMGTMIBNotifications 116 }
--- ****************************************************************************
mcrXfpHighTecCurrentWarn NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, xfpDmiHighAuxWarn, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's TEC Current has
exceeded the high TEC Current warning threshold. "
::= { mcrMGTMIBNotifications 117 }
mcrXfpHighTecCurrentWarnRecov NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's TEC Current has
recovered to normal operating level."
::= { mcrMGTMIBNotifications 118 }
mcrXfpHighTecCurrentAlarm NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, xfpDmiHighAuxAlarm, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's TEC Current has
exceeded the high TEC Current alarm threshold. "
::= { mcrMGTMIBNotifications 119 }
mcrXfpHighTecCurrentAlarmRecov NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's TEC Current has
recovered to normal operating level. "
::= { mcrMGTMIBNotifications 120 }
mcrXfpLowTecCurrentWarn NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, xfpDmiLowAuxWarn, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's TEC Current has gone
below the low TEC Current warning threshold. "
::= { mcrMGTMIBNotifications 121 }
mcrXfpLowTecCurrentWarnRecov NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, mcrMediaPortNum}
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's TEC Current has
recovered to normal operating level. "
::= { mcrMGTMIBNotifications 122 }
--
mcrXfpLowTecCurrentAlarm NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, xfpDmiLowAuxAlarm, mcrMediaPortNum}
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's TEC Current has gone
below the low TEC Current alarm threshold. "
::= { mcrMGTMIBNotifications 123}
mcrXfpLowTecCurrentAlarmRecov NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, mcrMediaPortNum}
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's TEC Current has
recovered to normal operating level. "
::= { mcrMGTMIBNotifications 124 }
--- ****************************************************************************
mcrXfpHighLaserTempWarn NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, cfgTemperatureUnits, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, xfpDmiHighAuxWarn, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's Laser Temperature has
exceeded the high Laser Temperature warning threshold. "
::= { mcrMGTMIBNotifications 125 }
mcrXfpHighLaserTempWarnRecov NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, cfgTemperatureUnits, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's Laser Temperature has
recovered to normal operating level."
::= { mcrMGTMIBNotifications 126 }
mcrXfpHighLaserTempAlarm NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, cfgTemperatureUnits, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, xfpDmiHighAuxAlarm, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's Laser Temperature has
exceeded the high Laser Temperature alarm threshold. "
::= { mcrMGTMIBNotifications 127 }
mcrXfpHighLaserTempAlarmRecov NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, cfgTemperatureUnits, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's Laser Temperature has
recovered to normal operating level. "
::= { mcrMGTMIBNotifications 128 }
mcrXfpLowLaserTempWarn NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, cfgTemperatureUnits, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, xfpDmiLowAuxWarn, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's Laser Temperature has gone
below the low Laser Temperature warning threshold. "
::= { mcrMGTMIBNotifications 129 }
mcrXfpLowLaserTempWarnRecov NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, cfgTemperatureUnits, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, mcrMediaPortNum}
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's Laser Temperature has
recovered to normal operating level. "
::= { mcrMGTMIBNotifications 130 }
--
mcrXfpLowLaserTempAlarm NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, cfgTemperatureUnits, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, xfpDmiLowAuxAlarm, mcrMediaPortNum}
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's Laser Temperature has gone
below the low Laser Temperature alarm threshold. "
::= { mcrMGTMIBNotifications 131}
mcrXfpLowLaserTempAlarmRecov NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, cfgTemperatureUnits, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, mcrMediaPortNum}
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's Laser Temperature has
recovered to normal operating level. "
::= { mcrMGTMIBNotifications 132 }
--- ****************************************************************************
mcrXfpHighLaserWavelengthWarn NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, xfpDmiHighAuxWarn, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's Laser Wavelength has
exceeded the high Laser Wavelength warning threshold. "
::= { mcrMGTMIBNotifications 133 }
mcrXfpHighLaserWavelengthWarnRecov NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's Laser Wavelength has
recovered to normal operating level."
::= { mcrMGTMIBNotifications 134 }
mcrXfpHighLaserWavelengthAlarm NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, xfpDmiHighAuxAlarm, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's Laser Wavelength has
exceeded the high Laser Wavelength alarm threshold. "
::= { mcrMGTMIBNotifications 135 }
mcrXfpHighLaserWavelengthAlarmRecov NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's Laser Wavelength has
recovered to normal operating level. "
::= { mcrMGTMIBNotifications 136 }
mcrXfpLowLaserWavelengthWarn NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, xfpDmiLowAuxWarn, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's Laser Wavelength has gone
below the low Laser Wavelength warning threshold. "
::= { mcrMGTMIBNotifications 137 }
mcrXfpLowLaserWavelengthWarnRecov NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, mcrMediaPortNum}
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's Laser Wavelength has
recovered to normal operating level. "
::= { mcrMGTMIBNotifications 138 }
--
mcrXfpLowLaserWavelengthAlarm NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, xfpDmiLowAuxAlarm, mcrMediaPortNum}
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's Laser Wavelength has gone
below the low Laser Wavelength alarm threshold. "
::= { mcrMGTMIBNotifications 139}
mcrXfpLowLaserWavelengthAlarmRecov NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, mcrMediaPortNum}
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's Laser Wavelength has
recovered to normal operating level. "
::= { mcrMGTMIBNotifications 140 }
--- ****************************************************************************
mcrXfpHigh5VoltWarn NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, xfpDmiHighAuxWarn, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's +5v supply has
exceeded the high +5v supply warning threshold. "
::= { mcrMGTMIBNotifications 141 }
mcrXfpHigh5VoltWarnRecov NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's +5v supply has
recovered to normal operating level."
::= { mcrMGTMIBNotifications 142 }
mcrXfpHigh5VoltAlarm NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, xfpDmiHighAuxAlarm, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's +5v supply has
exceeded the high +5v supply alarm threshold. "
::= { mcrMGTMIBNotifications 143 }
mcrXfpHigh5VoltAlarmRecov NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's +5v supply has
recovered to normal operating level. "
::= { mcrMGTMIBNotifications 144 }
mcrXfpLow5VoltWarn NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, xfpDmiLowAuxWarn, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's +5v supply has gone
below the low +5v supply warning threshold. "
::= { mcrMGTMIBNotifications 145 }
mcrXfpLow5VoltWarnRecov NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, mcrMediaPortNum}
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's +5v supply has
recovered to normal operating level. "
::= { mcrMGTMIBNotifications 146 }
--
mcrXfpLow5VoltAlarm NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, xfpDmiLowAuxAlarm, mcrMediaPortNum}
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's +5v supply has gone
below the low +5v supply alarm threshold. "
::= { mcrMGTMIBNotifications 147 }
mcrXfpLow5VoltAlarmRecov NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, mcrMediaPortNum}
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's +5v supply has
recovered to normal operating level. "
::= { mcrMGTMIBNotifications 148 }
--- ****************************************************************************
mcrXfpHigh33VoltWarn NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, xfpDmiHighAuxWarn, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's +3.3v supply has
exceeded the high +3.3v supply warning threshold. "
::= { mcrMGTMIBNotifications 149 }
mcrXfpHigh33VoltWarnRecov NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's +3.3v supply has
recovered to normal operating level."
::= { mcrMGTMIBNotifications 150 }
mcrXfpHigh33VoltAlarm NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, xfpDmiHighAuxAlarm, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's +3.3v supply has
exceeded the high +3.3v supply alarm threshold. "
::= { mcrMGTMIBNotifications 151 }
mcrXfpHigh33VoltAlarmRecov NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's +3.3v supply has
recovered to normal operating level. "
::= { mcrMGTMIBNotifications 152 }
mcrXfpLow33VoltWarn NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, xfpDmiLowAuxWarn, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's +3.3v supply has gone
below the low +3.3v supply warning threshold. "
::= { mcrMGTMIBNotifications 153 }
mcrXfpLow33VoltWarnRecov NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, mcrMediaPortNum}
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's +3.3v supply has
recovered to normal operating level. "
::= { mcrMGTMIBNotifications 154 }
--
mcrXfpLow33VoltAlarm NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, xfpDmiLowAuxAlarm, mcrMediaPortNum}
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's +3.3v supply has gone
below the low +3.3v supply alarm threshold. "
::= { mcrMGTMIBNotifications 155}
mcrXfpLow33VoltAlarmRecov NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, mcrMediaPortNum}
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's +3.3v supply has
recovered to normal operating level. "
::= { mcrMGTMIBNotifications 156 }
--
--- ****************************************************************************
mcrXfpHigh18VoltWarn NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, xfpDmiHighAuxWarn, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's +1.8v supply has
exceeded the high +1.8v supply warning threshold. "
::= { mcrMGTMIBNotifications 157 }
mcrXfpHigh18VoltWarnRecov NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's +1.8v supply has
recovered to normal operating level."
::= { mcrMGTMIBNotifications 158 }
mcrXfpHigh18VoltAlarm NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, xfpDmiHighAuxAlarm, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's +1.8v supply has
exceeded the high +1.8v supply alarm threshold. "
::= { mcrMGTMIBNotifications 159 }
mcrXfpHigh18VoltAlarmRecov NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's +1.8v supply has
recovered to normal operating level. "
::= { mcrMGTMIBNotifications 160 }
mcrXfpLow18VoltWarn NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, xfpDmiLowAuxWarn, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's +1.8v supply has gone
below the low +1.8v supply warning threshold. "
::= { mcrMGTMIBNotifications 161 }
mcrXfpLow18VoltWarnRecov NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, mcrMediaPortNum}
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's +1.8v supply has
recovered to normal operating level. "
::= { mcrMGTMIBNotifications 162 }
--
mcrXfpLow18VoltAlarm NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, xfpDmiLowAuxAlarm, mcrMediaPortNum}
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's +1.8v supply has gone
below the low +1.8v supply alarm threshold. "
::= { mcrMGTMIBNotifications 163}
mcrXfpLow18VoltAlarmRecov NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, mcrMediaPortNum}
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's +1.8v supply has
recovered to normal operating level. "
::= { mcrMGTMIBNotifications 164 }
--- ****************************************************************************
mcrXfpHighM52VoltWarn NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, xfpDmiHighAuxWarn, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's -5.2v supply has
exceeded the high -5.2v supply warning threshold. "
::= { mcrMGTMIBNotifications 165 }
mcrXfpHighM52VoltWarnRecov NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's -5.2v supply has
recovered to normal operating level."
::= { mcrMGTMIBNotifications 166 }
mcrXfpHighM52VoltAlarm NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, xfpDmiHighAuxAlarm, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's -5.2v supply has
exceeded the high -5.2v supply alarm threshold. "
::= { mcrMGTMIBNotifications 167 }
mcrXfpHighM52VoltAlarmRecov NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's -5.2v supply has
recovered to normal operating level. "
::= { mcrMGTMIBNotifications 168 }
mcrXfpLowM52VoltWarn NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, xfpDmiLowAuxWarn, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's -5.2v supply has gone
below the low -5.2v supply warning threshold. "
::= { mcrMGTMIBNotifications 169 }
mcrXfpLowM52VoltWarnRecov NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, mcrMediaPortNum}
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's -5.2v supply has
recovered to normal operating level. "
::= { mcrMGTMIBNotifications 170 }
--
mcrXfpLowM52VoltAlarm NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, xfpDmiLowAuxAlarm, mcrMediaPortNum}
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's -5.2v supply has gone
below the low -5.2v supply alarm threshold. "
::= { mcrMGTMIBNotifications 171}
mcrXfpLowM52VoltAlarmRecov NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, mcrMediaPortNum}
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's -5.2v supply has
recovered to normal operating level. "
::= { mcrMGTMIBNotifications 172 }
--- ****************************************************************************
mcrXfpHigh5VCurrentWarn NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, xfpDmiHighAuxWarn, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's +5v supply current has
exceeded the high +5v supply current warning threshold. "
::= { mcrMGTMIBNotifications 173 }
mcrXfpHigh5VCurrentWarnRecov NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's +5v supply current has
recovered to normal operating level."
::= { mcrMGTMIBNotifications 174 }
mcrXfpHigh5VCurrentAlarm NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, xfpDmiHighAuxAlarm, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's +5v supply current has
exceeded the high +5v supply current alarm threshold. "
::= { mcrMGTMIBNotifications 175 }
mcrXfpHigh5VCurrentAlarmRecov NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's +5v supply current has
recovered to normal operating level. "
::= { mcrMGTMIBNotifications 176 }
mcrXfpLow5VCurrentWarn NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, xfpDmiLowAuxWarn, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's +5v supply current has gone
below the low +5v supply current warning threshold. "
::= { mcrMGTMIBNotifications 177 }
mcrXfpLow5VCurrentWarnRecov NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, mcrMediaPortNum}
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's +5v supply current has
recovered to normal operating level. "
::= { mcrMGTMIBNotifications 178 }
--
mcrXfpLow5VCurrentAlarm NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, xfpDmiLowAuxAlarm, mcrMediaPortNum}
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's +5v supply current has gone
below the low +5v supply current alarm threshold. "
::= { mcrMGTMIBNotifications 179}
mcrXfpLow5VCurrentAlarmRecov NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, mcrMediaPortNum}
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's +5v supply current has
recovered to normal operating level. "
::= { mcrMGTMIBNotifications 180 }
--- ****************************************************************************
mcrXfpHigh33VCurrentWarn NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, xfpDmiHighAuxWarn, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's +3.3v supply current has
exceeded the high +3.3v supply current warning threshold. "
::= { mcrMGTMIBNotifications 181 }
mcrXfpHigh33VCurrentWarnRecov NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's +3.3v supply current has
recovered to normal operating level."
::= { mcrMGTMIBNotifications 182 }
mcrXfpHigh33VCurrentAlarm NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, xfpDmiHighAuxAlarm, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's +3.3v supply current has
exceeded the high +3.3v supply current alarm threshold. "
::= { mcrMGTMIBNotifications 183 }
mcrXfpHigh33VCurrentAlarmRecov NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's +3.3v supply current has
recovered to normal operating level. "
::= { mcrMGTMIBNotifications 184 }
mcrXfpLow33VCurrentWarn NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, xfpDmiLowAuxWarn, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's +3.3v supply current has gone
below the low +3.3v supply current warning threshold. "
::= { mcrMGTMIBNotifications 185 }
mcrXfpLow33VCurrentWarnRecov NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, mcrMediaPortNum}
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's +3.3v supply current has
recovered to normal operating level. "
::= { mcrMGTMIBNotifications 186 }
--
mcrXfpLow33VCurrentAlarm NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, xfpDmiLowAuxAlarm, mcrMediaPortNum}
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's +3.3v supply current has gone
below the low +3.3v supply current alarm threshold. "
::= { mcrMGTMIBNotifications 187}
mcrXfpLow33VCurrentAlarmRecov NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, mcrMediaPortNum}
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's +3.3v supply current has
recovered to normal operating level. "
::= { mcrMGTMIBNotifications 188 }
--- ****************************************************************************
mcrXfpHigh18VCurrentWarn NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, xfpDmiHighAuxWarn, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's +1.8v supply current has
exceeded the high +1.8v supply current warning threshold. "
::= { mcrMGTMIBNotifications 189 }
mcrXfpHigh18VCurrentWarnRecov NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's +1.8v supply current has
recovered to normal operating level."
::= { mcrMGTMIBNotifications 190 }
mcrXfpHigh18VCurrentAlarm NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, xfpDmiHighAuxAlarm, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's +1.8v supply current has
exceeded the high +1.8v supply current alarm threshold. "
::= { mcrMGTMIBNotifications 191 }
mcrXfpHigh18VCurrentAlarmRecov NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's +1.8v supply current has
recovered to normal operating level. "
::= { mcrMGTMIBNotifications 192 }
mcrXfpLow18VCurrentWarn NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, xfpDmiLowAuxWarn, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's +1.8v supply current has gone
below the low +1.8v supply current warning threshold. "
::= { mcrMGTMIBNotifications 193 }
mcrXfpLow18VCurrentWarnRecov NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, mcrMediaPortNum}
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's +1.8v supply current has
recovered to normal operating level. "
::= { mcrMGTMIBNotifications 194 }
--
mcrXfpLow18VCurrentAlarm NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, xfpDmiLowAuxAlarm, mcrMediaPortNum}
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's +1.8v supply current has gone
below the low +1.8v supply current alarm threshold. "
::= { mcrMGTMIBNotifications 195}
mcrXfpLow18VCurrentAlarmRecov NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, mcrMediaPortNum}
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's +1.8v supply current has
recovered to normal operating level. "
::= { mcrMGTMIBNotifications 196 }
--- ****************************************************************************
mcrXfpHighM52VCurrentWarn NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, xfpDmiHighAuxWarn, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's -5.2v supply current has
exceeded the high -5.2v supply current warning threshold. "
::= { mcrMGTMIBNotifications 197 }
mcrXfpHighM52VCurrentWarnRecov NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's -5.2v supply current has
recovered to normal operating level."
::= { mcrMGTMIBNotifications 198 }
mcrXfpHighM52VCurrentAlarm NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, xfpDmiHighAuxAlarm, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's -5.2v supply current has
exceeded the high -5.2v supply current alarm threshold. "
::= { mcrMGTMIBNotifications 199 }
mcrXfpHighM52VCurrentAlarmRecov NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's -5.2v supply current has
recovered to normal operating level. "
::= { mcrMGTMIBNotifications 200 }
mcrXfpLowM52VCurrentWarn NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, xfpDmiLowAuxWarn, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's -5.2v supply current has gone
below the low -5.2v supply current warning threshold. "
::= { mcrMGTMIBNotifications 201 }
mcrXfpLowM52VCurrentWarnRecov NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, mcrMediaPortNum}
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's -5.2v supply current has
recovered to normal operating level. "
::= { mcrMGTMIBNotifications 202 }
--
mcrXfpLowM52VCurrentAlarm NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, xfpDmiLowAuxAlarm, mcrMediaPortNum}
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's -5.2v supply current has gone
below the low -5.2v supply current alarm threshold. "
::= { mcrMGTMIBNotifications 203}
mcrXfpLowM52VCurrentAlarmRecov NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, xfpDmiRealTimeAux, mcrMediaPortNum}
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's -5.2v supply current has
recovered to normal operating level. "
::= { mcrMGTMIBNotifications 204 }
--- ****************************************************************************
mcrXfpHighVCC5Warn NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's +5v supply has
exceeded the high +5v supply warning threshold."
::= { mcrMGTMIBNotifications 205 }
mcrXfpHighVCC5WarnRecov NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's +5v supply has
recovered to normal operating level."
::= { mcrMGTMIBNotifications 206 }
mcrXfpHighVCC5Alarm NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's +5v supply has
exceeded the high +5v supply alarm threshold. "
::= { mcrMGTMIBNotifications 207 }
mcrXfpHighVCC5AlarmRecov NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's +5v supply has
recovered to normal operating level. "
::= { mcrMGTMIBNotifications 208 }
mcrXfpLowVCC5Warn NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's +5v supply has gone
below the low +5v supply warning threshold. "
::= { mcrMGTMIBNotifications 209 }
mcrXfpLowVCC5WarnRecov NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, mcrMediaPortNum}
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's +5v supply has
recovered to normal operating level. "
::= { mcrMGTMIBNotifications 210 }
--
mcrXfpLowVCC5Alarm NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, mcrMediaPortNum}
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's +5v supply has gone
below the low +5v supply alarm threshold. "
::= { mcrMGTMIBNotifications 211 }
mcrXfpLowVCC5AlarmRecov NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, mcrMediaPortNum}
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's +5v supply has
recovered to normal operating level. "
::= { mcrMGTMIBNotifications 212 }
--- ****************************************************************************
mcrXfpHighVCC3Warn NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's +3.3v supply has
exceeded the high +3.3v supply warning threshold."
::= { mcrMGTMIBNotifications 213 }
mcrXfpHighVCC3WarnRecov NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's +3.3v supply has
recovered to normal operating level."
::= { mcrMGTMIBNotifications 214 }
mcrXfpHighVCC3Alarm NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's +3.3v supply has
exceeded the high +3.3v supply alarm threshold. "
::= { mcrMGTMIBNotifications 215 }
mcrXfpHighVCC3AlarmRecov NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's +3.3v supply has
recovered to normal operating level. "
::= { mcrMGTMIBNotifications 216 }
mcrXfpLowVCC3Warn NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's +3.3v supply has gone
below the low +3.3v supply warning threshold. "
::= { mcrMGTMIBNotifications 217 }
mcrXfpLowVCC3WarnRecov NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, mcrMediaPortNum}
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's +3.3v supply has
recovered to normal operating level. "
::= { mcrMGTMIBNotifications 218 }
--
mcrXfpLowVCC3Alarm NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, mcrMediaPortNum}
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's +3.3v supply has gone
below the low +3.3v supply alarm threshold. "
::= { mcrMGTMIBNotifications 219 }
mcrXfpLowVCC3AlarmRecov NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, mcrMediaPortNum}
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's +3.3v supply has
recovered to normal operating level. "
::= { mcrMGTMIBNotifications 220 }
--- ****************************************************************************
mcrXfpHighVCC2Warn NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's +1.8v supply has
exceeded the high +1.8v supply warning threshold."
::= { mcrMGTMIBNotifications 221 }
mcrXfpHighVCC2WarnRecov NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's +1.8v supply has
recovered to normal operating level."
::= { mcrMGTMIBNotifications 222 }
mcrXfpHighVCC2Alarm NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's +1.8v supply has
exceeded the high +1.8v supply alarm threshold. "
::= { mcrMGTMIBNotifications 223 }
mcrXfpHighVCC2AlarmRecov NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's +1.8v supply has
recovered to normal operating level. "
::= { mcrMGTMIBNotifications 224 }
mcrXfpLowVCC2Warn NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's +1.8v supply has gone
below the low +1.8v supply warning threshold. "
::= { mcrMGTMIBNotifications 225 }
mcrXfpLowVCC2WarnRecov NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, mcrMediaPortNum}
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's +1.8v supply has
recovered to normal operating level. "
::= { mcrMGTMIBNotifications 226 }
--
mcrXfpLowVCC2Alarm NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, mcrMediaPortNum}
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's +1.8v supply has gone
below the low +1.8v supply alarm threshold. "
::= { mcrMGTMIBNotifications 227 }
mcrXfpLowVCC2AlarmRecov NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, mcrMediaPortNum}
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's +1.8v supply has
recovered to normal operating level. "
::= { mcrMGTMIBNotifications 228 }
--- ****************************************************************************
mcrXfpHighVEE5Warn NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's -5.2v supply has
exceeded the high -5.2v supply warning threshold."
::= { mcrMGTMIBNotifications 229 }
mcrXfpHighVEE5WarnRecov NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's -5.2v supply has
recovered to normal operating level."
::= { mcrMGTMIBNotifications 230 }
mcrXfpHighVEE5Alarm NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's -5.2v supply has
exceeded the high -5.2v supply alarm threshold. "
::= { mcrMGTMIBNotifications 231 }
mcrXfpHighVEE5AlarmRecov NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's -5.2v supply has
recovered to normal operating level. "
::= { mcrMGTMIBNotifications 232 }
mcrXfpLowVEE5Warn NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, mcrMediaPortNum }
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's -5.2v supply has gone
below the low -5.2v supply warning threshold. "
::= { mcrMGTMIBNotifications 233 }
mcrXfpLowVEE5WarnRecov NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, mcrMediaPortNum}
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's -5.2v supply has
recovered to normal operating level. "
::= { mcrMGTMIBNotifications 234 }
--
mcrXfpLowVEE5Alarm NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, mcrMediaPortNum}
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's -5.2v supply has gone
below the low -5.2v supply alarm threshold. "
::= { mcrMGTMIBNotifications 235 }
mcrXfpLowVEE5AlarmRecov NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, mcrMediaPortNum}
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's -5.2v supply has
recovered to normal operating level. "
::= { mcrMGTMIBNotifications 236 }
--- ****************************************************************************
mcrSfpSpeedMismatch NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex, mcrUserDefinedModuleName}
STATUS current
DESCRIPTION
"Trap being sent indicates that there is a speed mismatch between the
two SFP modules installed in the media converter."
::= { mcrMGTMIBNotifications 237 }
mcrSfpSpeedMismatchRecov NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex, mcrUserDefinedModuleName}
STATUS current
DESCRIPTION
"Trap being sent indicates that the speed mismatch between the two SFP
modules has recovered."
::= { mcrMGTMIBNotifications 238 }
mcrXfpPowerExceeded NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex, mcrUserDefinedModuleName}
STATUS current
DESCRIPTION
"Trap being sent indicates that an XFP module's power requirements has
exceeded card capacity."
::= { mcrMGTMIBNotifications 239 }
mcrXfpPowerExceededRecov NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex, mcrUserDefinedModuleName}
STATUS current
DESCRIPTION
"Trap being sent indicates that the XFP excessive power alarm has recovered."
::= { mcrMGTMIBNotifications 240 }
mcrLinkTestError NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex, mcrUserDefinedModuleName}
STATUS current
DESCRIPTION
"Trap being sent indicates that the link test running on the media
converter has detected errors."
::= { mcrMGTMIBNotifications 241 }
mcrAlarmRelayEngaged NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex}
STATUS current
DESCRIPTION
"Trap being sent indicates that the chassis alarm relay has engaged"
::= { mcrMGTMIBNotifications 242 }
mcrAlarmRelayDisengaged NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex}
STATUS current
DESCRIPTION
"Trap being sent indicates that the chassis alarm relay has disengaged"
::= { mcrMGTMIBNotifications 243 }
mcrBandwidthLevelUpstreamLow NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, mcrMediaPortNum,
mcrMediaPortBandwidth, mcrMediaPortBandwidthThreshold }
STATUS current
DESCRIPTION
"Trap being sent indicates the media port is in a low upstream bandwidth condition. This happens when the bandwidth
is below the configured threshold."
::= { mcrMGTMIBNotifications 244 }
mcrBandwidthLevelUpstreamRecov NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, mcrMediaPortNum,
mcrMediaPortBandwidth, mcrMediaPortBandwidthThreshold }
STATUS current
DESCRIPTION
"Trap being sent indicates the media port has recovered from a low upstream bandwidth condition."
::= { mcrMGTMIBNotifications 245 }
mcrBandwidthLevelDownstreamLow NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, mcrMediaPortNum,
mcrMediaPortBandwidth, mcrMediaPortBandwidthThreshold }
STATUS current
DESCRIPTION
"Trap being sent indicates the media port is in a low downstream bandwidth condition. This happens when the bandwidth
is below the configured threshold."
::= { mcrMGTMIBNotifications 246 }
mcrBandwidthLevelDownstreamRecov NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName, mcrMediaPortNum,
mcrMediaPortBandwidth, mcrMediaPortBandwidthThreshold }
STATUS current
DESCRIPTION
"Trap being sent indicates the media port has recovered from a low downstream bandwidth condition."
::= { mcrMGTMIBNotifications 247 }
mcrMediaRemoteReset NOTIFICATION-TYPE
OBJECTS { eventSeverityLevel, mcrChassisIndex, mcrChassisSlotIndex,
mcrUserDefinedModuleName }
STATUS current
DESCRIPTION
"Trap being sent indicates that the media converter module's peer has been manually reset by a user
managing the unit. "
::= { mcrMGTMIBNotifications 248 }
-- end of mcrMGTMIBNotifications
--
--
-- mcrMGTMIBConformance
--
mcrMGTMIBCompliances OBJECT IDENTIFIER
::= { mcrMGTMIBConformance 1 }
mcrMGTMIBGroups OBJECT IDENTIFIER
::= { mcrMGTMIBConformance 2 }
--
-- compliance statements
--
--
mcrMGTMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for mcrMGT which implement
the Perle Managed Media Converters MIB."
MODULE -- this module
MANDATORY-GROUPS {
mcrMGTMIBChassisGroup,
mcrMGTMIBMediaGroup,
mcrMGTMIBMgtGroup,
mcrMGTMIBNotificationsGroup
}
::= { mcrMGTMIBCompliances 1 }
-- units of conformance
--
-- mcrMGTMIBChassisGroup
--
mcrMGTMIBChassisGroup OBJECT-GROUP
OBJECTS {
mcrChassisIndex, mcrChassisSlotIndex, mcrPsmuIndex,
chassisModelName,chassisModelDesc ,chassisSerialNumber,chassisBootloaderVersion,
chassisFirmwareVersion,chassisOutStandWarnAlarms,
chassisDiagStatus,chassisTemperature,chassisCfgHighTempThreshold,chassisReset,
chassisCfgMgmtSlot,
mcrPsmuModelName,mcrPsmuModelDesc,mcrPsmuPsuSerialNumber,mcrPsmuBootloaderVersion,
mcrPsmuFirmwareVersion,mcrPsmuOutStandWarnAlarms,mcrPsmuPsuStatus,
mcrPsmuPsuVoltage,mcrPsmuPsuPowerUsage,mcrPsmuFanStatus,mcrPsmuFanSpeed,
mcrUserDefinedModuleName,mcrModuleModelName,mcrUnManagedModuleSlotName,mcrModuleSerialNumber,
mcrModuleBootloaderVersion,mcrModuleFirmwareVersion,mcrModuleoOutStandWarnAlarms,mcrModuleDiagStatus,
mcrModuleTypeInserted,mcrMediaConfigBackupRestore,mcrMediaBackedupModuleType,mcrChassisPwrUpSlotPwrState,
mcrCurrentPowerState,mcrPowerScheduleEnable,mcrModuleReset,mcrModuleResetToFactory,mcrModuleModelDesc,
alarmWarnSeverity, alarmWarnType, alarmWarnFlags,
alarmWarnChassisNum, alarmWarnDeviceNum, alarmWarnTimeStamp, alarmWarnMessage, alarmWarnPortNum,
moduleModel, portName, portEnable, portType, portLinkStatus, portConnType, portAutoNegState,
portSpeed, portDuplex, portPause, portRemoteStatus, portMediaType, portPhysicalProtocol
}
STATUS current
DESCRIPTION
"The group of objects for identifying and determining the configuration and
current timeliness values of the Perle Managed Media Converters chassis."
::= { mcrMGTMIBGroups 1 }
--
-- end of mcrMGTMIBChassisGroup
--
--
-- mcrMGTMIBMediaGroup
--
mcrMGTMIBMediaGroup OBJECT-GROUP
OBJECTS {
cm1000Modelname,cm1000ModelDesc ,cm1000HwJmp5ConfigMode ,cm1000HwSw1FiberAutoNeg,
cm1000HwSw2LinkMode,cm1000HwSw3FiberFaultAlert,cm1000HwSw4Duplex,cm1000HwSw5Pause,cm1000HwSw6Loopback,
cm1000FiberLinkStatus,cm1000FiberConnType,cm1000FiberAutoNegState,cm1000FiberSpeed,
cm1000FiberDuplex,cm1000FiberPauseEnh,cm1000FiberLPRFStatus,cm1000FiberReceiveStatus,cm1000FiberLoopBack,
cm1000CopperLinkStatus,cm1000CopperConnType,cm1000CopperAutoNegState,cm1000CopperSpeed,
cm1000CopperDuplex,cm1000CopperCrossOver,cm1000CopperPauseEnh,cm1000CopperLPRFStatus,
cm1000ConfigStatus,cm1000ConfigModuleName,cm1000ConfigLinkMode,cm1000ConfigFiberFaultAlert,
cm1000ConfigJumboPackets,cm1000ConfigFiberPortName,cm1000ConfigFiberPortEnable,
cm1000ConfigFiberAutoNeg,cm1000ConfigCopperPortName,cm1000ConfigCopperPortEnable,
cm1000ConfigCopperDuplex,cm1000ConfigCopperPauseEnh,cm1000ConfigCopperLowPower,
cm1000LedPWR,cm1000LedLKF,cm1000LedLKC,
cm1000mmModelname,cm1000mmModelDesc ,cm1000mmHwJmp5ConfigMode ,
cm1000mmHwSw1FiberAutoNeg,
cm1000mmHwSw2LinkMode,
cm1000mmHwSw3FiberFaultAlert,
cm1000mmHwSw4Loopback1,
cm1000mmHwSw5Loopback2,
cm1000mmFiber1LinkStatus,cm1000mmFiber1ConnType,cm1000mmFiber1AutoNegState,cm1000mmFiber1Speed,
cm1000mmFiber1Duplex,cm1000mmFiber1PauseEnh,cm1000mmFiber1LPRFStatus,cm1000mmFiber1ReceiveStatus,
cm1000mmFiber2LinkStatus,cm1000mmFiber2ConnType,cm1000mmFiber2AutoNegState,cm1000mmFiber2Speed,
cm1000mmFiber2Duplex,cm1000mmFiber2PauseEnh,cm1000mmFiber2LPRFStatus,cm1000mmFiber2ReceiveStatus,
cm1000mmFiberLoopBack,
cm1000mmConfigStatus,cm1000mmConfigModuleName,cm1000mmConfigLinkMode,cm1000mmConfigFiberFaultAlert,
cm1000mmConfigJumboPackets,cm1000mmConfigFiberAutoNeg,
cm1000mmConfigFiber1PortName,cm1000mmConfigFiber1PortEnable,
cm1000mmConfigFiber2PortName,cm1000mmConfigFiber2PortEnable,
cm1000mmLedPWR,cm1000mmLedLK1,cm1000mmLedLK2,
cm100ModelName,cm100ModelDesc ,cm100HwJmp5ConfigMode,cm100HwJmp6AutoMDI,cm100HwSw1AutoNegotiation,
cm100HwSw2LinkMode,cm100HwSw3FarEndFault,cm100HwSw5Pause,cm100HwSw6Loopback,cm100FiberLinkStatus,
cm100FiberConnType,cm100FiberSpeed,cm100FiberFarEndFault,cm100FiberReceiveStatus,cm100FiberLoopBack,
cm100CopperLinkStatus,cm100CopperConnType,cm100CopperAutoNegState,cm100CopperSpeed,cm100CopperDuplex,
cm100CopperCrossOver,cm100CopperPause,cm100CopperLPRFStatus,
cm100ConfigStatus,cm100ConfigModuleName,cm100ConfigLinkMode,cm100ConfigFiberFarEndFault,
cm100ConfigFiberPortName,cm100ConfigFiberPortEnable,cm100ConfigCopperPortName,
cm100ConfigCopperPortEnable,cm100ConfigCopperAutoNegotiation,cm100ConfigCopperCrossOver,
cm100ConfigCopperPause,
cm100LedPWR,cm100LedLKC,cm100LedLKF,
cm100mmModelName,cm100mmModelDesc ,cm100mmHwJmp5ConfigMode,
cm100mmHwSw1LinkPassthrough,
cm100mmHwSw2FarEndFault,
cm100mmHwSw3Loopback1,
cm100mmHwSw4Loopback2,
cm100mmFiber1LinkStatus,cm100mmFiber1ConnType,cm100mmFiber1Speed,cm100mmFiber1FarEndFault,cm100mmFiber1ReceiveStatus,
cm100mmFiber2LinkStatus,cm100mmFiber2ConnType,cm100mmFiber2Speed,cm100mmFiber2FarEndFault,cm100mmFiber2ReceiveStatus,
cm100mmFiberLoopBack,
cm100mmConfigStatus,cm100mmConfigModuleName,cm100mmConfigLinkMode,cm100mmConfigFiberFarEndFault,
cm100mmConfigFiber1PortName,cm100mmConfigFiber1PortEnable,
cm100mmConfigFiber2PortName,cm100mmConfigFiber2PortEnable,
cm100mmLedPWR,cm100mmLedLK1,cm100mmLedLK2,
cm1110ModelName,cm1110ModelDesc ,cm1110HwJmp5ConfigMode,cm1110HwJmp6AutoMDIX,cm1110HwSw1TpAutoNegotiation,
cm1110HwSw2LinkMode,cm1110HwSw3FiberFaultAlert,cm1110HwSw4TpDuplex,cm1110HwSw5TpSpeed,
cm1110HwSw6FiberAutoNegotiation,cm1110HwSw6FiberSfp100Duplex,cm1110HwSw7Loopback,cm1110FiberLinkStatus,cm1110FiberConnType,
cm1110FiberAutoNegState,cm1110FiberSpeed,cm1110FiberDuplex,cm1110FiberPauseEnh,
cm1110FiberLPRFStatus,cm1110FiberSfp100FarEndFault,cm1110FiberReceiveStatus,cm1110FiberLoopBack ,cm1110CopperLinkStatus,cm1110CopperConnType,
cm1110CopperAutoNegState,cm1110CopperSpeed,cm1110CopperDuplex,cm1110CopperCrossOver,
cm1110CopperPauseEnh,cm1110CopperLPRFStatus,cm1110CopperAutoSpeedDownshift,
cm1110ConfigStatus,cm1110ConfigModuleName,cm1110ConfigLinkMode,cm1110ConfigFiberFaultAlert,
cm1110ConfigMaxPacketsSize,cm1110ConfigFiberPortName,cm1110ConfigFiberPortEnable,
cm1110ConfigFiberAutoNegotiation,cm1110ConfigFiberSfp100duplex,cm1110ConfigCopperPortName,cm1110ConfigCopperPortEnable,
cm1110ConfigCopperAutoNegotiation,cm1110ConfigCopperAutoNegAdv10HDX,cm1110ConfigCopperAutoNegAdv10FDX,
cm1110ConfigCopperAutoNegAdv100HDX,cm1110ConfigCopperAutoNegAdv100FDX,cm1110ConfigCopperAutoNegAdv1000FDX,
cm1110ConfigCopperSpeed,cm1110ConfigCopperDuplex,cm1110ConfigCopperCrossOver,
cm1110ConfigCopperPauseEnh,cm1110ConfigCopperAutoSpeedDownshift,cm1110ConfigCopper10BaseTDistance,
cm1110ConfigUnidirectionalEthernet ,
cm1110ConfigPriorityToEgressQueueMap0 ,
cm1110ConfigPriorityToEgressQueueMap1 ,
cm1110ConfigPriorityToEgressQueueMap2 ,
cm1110ConfigPriorityToEgressQueueMap3 ,
cm1110ConfigPriorityToEgressQueueMap4 ,
cm1110ConfigPriorityToEgressQueueMap5 ,
cm1110ConfigPriorityToEgressQueueMap6 ,
cm1110ConfigPriorityToEgressQueueMap7 ,
cm1110ConfigCopper8021pPriority ,
cm1110ConfigCopperIpTosPriority ,
cm1110ConfigCopperPriorityPrecedence ,
cm1110ConfigCopperCongestionPolicy ,
cm1110ConfigCopperPriorityMap0 ,
cm1110ConfigCopperPriorityMap1 ,
cm1110ConfigCopperPriorityMap2 ,
cm1110ConfigCopperPriorityMap3 ,
cm1110ConfigCopperPriorityMap4 ,
cm1110ConfigCopperPriorityMap5 ,
cm1110ConfigCopperPriorityMap6 ,
cm1110ConfigCopperPriorityMap7 ,
cm1110ConfigCopperIngressLimit ,
cm1110ConfigCopperEgressLimit ,
cm1110ConfigCopperDiscardTaggedFrames ,
cm1110ConfigCopperDiscardUntaggedFrames,
cm1110ConfigCopperDefaultVlanId ,
cm1110ConfigCopperDefaultPriority ,
cm1110ConfigCopperVlanTaggingAction ,
cm1110ConfigCopperFilterUnknownMulticast,
cm1110ConfigCopperFilterUnknownUnicast ,
cm1110ConfigFiber8021pPriority ,
cm1110ConfigFiberIpTosPriority ,
cm1110ConfigFiberPriorityPrecedence ,
cm1110ConfigFiberCongestionPolicy ,
cm1110ConfigFiberPriorityMap0 ,
cm1110ConfigFiberPriorityMap1 ,
cm1110ConfigFiberPriorityMap2 ,
cm1110ConfigFiberPriorityMap3 ,
cm1110ConfigFiberPriorityMap4 ,
cm1110ConfigFiberPriorityMap5 ,
cm1110ConfigFiberPriorityMap6 ,
cm1110ConfigFiberPriorityMap7 ,
cm1110ConfigFiberIngressLimit ,
cm1110ConfigFiberEgressLimit ,
cm1110ConfigFiberDiscardTaggedFrames ,
cm1110ConfigFiberDiscardUntaggedFrames ,
cm1110ConfigFiberDefaultVlanId ,
cm1110ConfigFiberDefaultPriority ,
cm1110ConfigFiberVlanTaggingAction ,
cm1110ConfigFiberFilterUnknownMulticast ,
cm1110ConfigFiberFilterUnknownUnicast ,
cm1110ConfigFiberSgmiiInterface ,
cm1110LedPWR,cm1110LedFDF,cm1110LedLKF,cm1110LedCopperSpeed,cm1110LedFDC,cm1110LedLKC,
cm1110PortInDiscards,cm1110PortInFiltered,cm1110PortInGoodOctets,cm1110PortHCInGoodOctets,
cm1110PortInBadOctets,cm1110PortInUnicasts,cm1110PortInBroadcasts,cm1110PortInMulticasts,
cm1110PortInPauses,cm1110PortInUnderSizes,cm1110PortInFragments,cm1110PortInOversizes,
cm1110PortInJabbers,cm1110PortInRxErrs,cm1110PortInFcsErrs,cm1110PortPkts64Octets,
cm1110PortPkts65to127Octets,cm1110PortPkts128to255Octets,cm1110PortPkts256to511Octets,
cm1110PortPkts512to1023Octets,cm1110PortPkts1024toMaxOctets,cm1110PortOutOctets,
cm1110PortHCOutOctets,cm1110PortOutFiltered,cm1110PortOutUnicasts,cm1110PortOutBroadcasts,
cm1110PortOutMulticasts,cm1110PortOutPauses,cm1110PortDeferreds,cm1110PortCollisions,
cm1110PortSingles,cm1110PortMultiples,cm1110PortExcessives,cm1110PortLates,cm1110PortOutFcsErrs,
cm1110PortResetCounters,
cm1110AvctStart,cm1110AvctStatus,cm1110AvctTxRxPair1Results,cm1110AvctTxRxPair1Amplitude,
cm1110AvctTxRxPair1Distance,cm1110AvctTxRxPair2Results,cm1110AvctTxRxPair2Amplitude,
cm1110AvctTxRxPair2Distance,cm1110AvctTxRxPair3Results,cm1110AvctTxRxPair3Amplitude,
cm1110AvctTxRxPair3Distance,cm1110AvctTxRxPair4Results,cm1110AvctTxRxPair4Amplitude,
cm1110AvctTxRxPair4Distance,
cm110Modelname,cm110ModelDesc ,cm110HwJmp5ConfigMode,cm110HwJmp6AutoMDIX,cm110HwSw1TpAutoNegotiation,
cm110HwSw2LinkMode,cm110HwSw3FarEndFault,cm110HwSw4TpDuplex,cm110HwSw5TpSpeed,
cm110HwSw6FiberDuplex,cm110HwSw7Loopback,cm110FiberLinkStatus,cm110FiberConnType,
cm110FiberSpeed,cm110FiberFarEndFault,cm110FiberReceiveStatus,cm110FiberLoopBack ,cm110CopperLinkStatus,
cm110CopperConnType,cm110CopperAutoNegState,cm110CopperSpeed,cm110CopperDuplex,
cm110CopperCrossOver,cm110CopperPause,cm110CopperLPRFStatus,
cm110ConfigStatus,cm110ConfigModuleName,cm110ConfigLinkMode,cm110ConfigFiberFarEndFault,
cm110ConfigMaxPacketSize,cm110ConfigFiberPortName,cm110ConfigFiberPortEnable,cm110ConfigFiberDuplex,
cm110ConfigCopperPortName,cm110ConfigCopperPortEnable,cm110ConfigCopperAutoNegotiation,
cm110ConfigCopperAutoNegAdv10HDX,cm110ConfigCopperAutoNegAdv10FDX,cm110ConfigCopperAutoNegAdv100HDX,
cm110ConfigCopperAutoNegAdv100FDX,cm110ConfigCopperSpeed,cm110ConfigCopperDuplex,
cm110ConfigCopperCrossOver,cm110ConfigCopperPause,cm110ConfigCopperExtendDistance,
cm110ConfigUnidirectionalEthernet ,
cm110ConfigPriorityToEgressQueueMap0 ,
cm110ConfigPriorityToEgressQueueMap1 ,
cm110ConfigPriorityToEgressQueueMap2 ,
cm110ConfigPriorityToEgressQueueMap3 ,
cm110ConfigPriorityToEgressQueueMap4 ,
cm110ConfigPriorityToEgressQueueMap5 ,
cm110ConfigPriorityToEgressQueueMap6 ,
cm110ConfigPriorityToEgressQueueMap7 ,
cm110ConfigCopper8021pPriority ,
cm110ConfigCopperIpTosPriority ,
cm110ConfigCopperPriorityPrecedence ,
cm110ConfigCopperCongestionPolicy ,
cm110ConfigCopperPriorityMap0 ,
cm110ConfigCopperPriorityMap1 ,
cm110ConfigCopperPriorityMap2 ,
cm110ConfigCopperPriorityMap3 ,
cm110ConfigCopperPriorityMap4 ,
cm110ConfigCopperPriorityMap5 ,
cm110ConfigCopperPriorityMap6 ,
cm110ConfigCopperPriorityMap7 ,
cm110ConfigCopperIngressLimit ,
cm110ConfigCopperEgressLimit ,
cm110ConfigCopperDiscardTaggedFrames ,
cm110ConfigCopperDiscardUntaggedFrames,
cm110ConfigCopperDefaultVlanId ,
cm110ConfigCopperDefaultPriority ,
cm110ConfigCopperVlanTaggingAction ,
cm110ConfigCopperFilterUnknownMulticast,
cm110ConfigCopperFilterUnknownUnicast ,
cm110ConfigFiber8021pPriority ,
cm110ConfigFiberIpTosPriority ,
cm110ConfigFiberPriorityPrecedence ,
cm110ConfigFiberCongestionPolicy ,
cm110ConfigFiberPriorityMap0 ,
cm110ConfigFiberPriorityMap1 ,
cm110ConfigFiberPriorityMap2 ,
cm110ConfigFiberPriorityMap3 ,
cm110ConfigFiberPriorityMap4 ,
cm110ConfigFiberPriorityMap5 ,
cm110ConfigFiberPriorityMap6 ,
cm110ConfigFiberPriorityMap7 ,
cm110ConfigFiberIngressLimit ,
cm110ConfigFiberEgressLimit ,
cm110ConfigFiberDiscardTaggedFrames ,
cm110ConfigFiberDiscardUntaggedFrames ,
cm110ConfigFiberDefaultVlanId ,
cm110ConfigFiberDefaultPriority ,
cm110ConfigFiberVlanTaggingAction ,
cm110ConfigFiberFilterUnknownMulticast ,
cm110ConfigFiberFilterUnknownUnicast ,
cm110LedPWR,cm110LedFDF,cm110LedLKF,cm110LedCopperSpeed,cm110LedFDC,cm110LedLKC,
cm110PortRxErrors,cm110PortTxCollisions,cm110PortInFiltered,cm110PortInGoodOctets,
cm110PortInBadOctets,cm110PortInUnicasts,cm110PortInBroadcasts,cm110PortInMulticasts,
cm110PortInPauses,cm110PortInUnderSizes,cm110PortInFragments,cm110PortInOversizes,
cm110PortInJabbers,cm110PortInMACRcvErrs,cm110PortInFcsErrs,cm110PortPkts64Octets,
cm110PortPkts65to127Octets,cm110PortPkts128to255Octets,cm110PortPkts256to511Octets,
cm110PortPkts512to1023Octets,cm110PortPkts1024toMaxOctets,cm110PortOutOctets,
cm110PortOutUnicasts,cm110PortOutBroadcasts,cm110PortOutMulticasts,cm110PortOutPauses,
cm110PortExcessives,cm110PortCollisions,cm110PortDeferreds,cm110PortSingles,cm110PortMultiples,
cm110PortOutFcsErrs,cm110PortLates,cm110PortResetCounters,
cm110VctStart,cm110VctStatus,cm110VctTxPairResults,cm110VctTxPairAmplitude,cm110VctTxPairDistance,
cm110VctRxPairResults,cm110VctRxPairAmplitude,cm110VctRxPairDistance,
mcrMgtModelName,mcrMgtModelDesc,mcrMgtFailSafeBootLoaderVer ,mcrMgtUpTime,mcrMgtConsoleDSR,
mcrMgtConfigStatus,mcrMgtConfigEthSpeedDuplex,mcrMgtConfigEthCrossover,mcrMgtConfigConsolePortEnabled,
mcrMgtConfigConsoleSpeed,mcrMgtConfigConsoleDataBits,mcrMgtConfigConsoleParity,
mcrMgtConfigConsoleStopBits,mcrMgtConfigConsoleFlowControl,mcrMgtConfigConsoleMonitorDSR,
mcrMgtLedPWR,mcrMgtLedALM,mcrMgtLedLKC,mcrMgtLedCopperSpeed,
cm10gModelname,cm10gModelDesc ,cm10gHwJmp5ConfigMode ,
cm10gHwSw1OperationMode,
cm10gHwSw2LinkMode,
cm10gHwSw3FiberFaultAlert,
cm10gHwSw4Port1EdcMode,
cm10gHwSw5Port2EdcMode,
cm10gPort1LinkStatus,cm10gPort1ConnType,cm10gPort1AutoNegState,cm10gPort1Speed,
cm10gPort1Duplex,cm10gPort1PauseEnh,cm10gPort1ReceiveStatus,
cm10gPort2LinkStatus,cm10gPort2ConnType,cm10gPort2AutoNegState,cm10gPort2Speed,
cm10gPort2Duplex,cm10gPort2PauseEnh,cm10gPort2ReceiveStatus,
cm10gPortLoopBack,cm10gPortTestMode,
cm10gConfigStatus,cm10gConfigModuleName,cm10gConfigLinkMode,cm10gConfigFiberFaultAlert,cm10gConfigFiberAutoNeg,
cm10gConfigPort1Name,cm10gConfigPort1Enable, cm10gConfigPort1EdcMode, cm10gConfigPort1FecEnable,
cm10gConfigPort1FecAmplitude, cm10gConfigPort1FecPhase, cm10gConfigPort1WavelengthEnable, cm10gConfigPort1WavelengthValue,
cm10gConfigPort1ChannelEnable, cm10gConfigPort1ChannelNumber, cm10gConfigPort1TxDitherEnable, cm10gConfigPort1TxDitherValue,
cm10gConfigPort2Name,cm10gConfigPort2Enable, cm10gConfigPort2EdcMode, cm10gConfigPort2FecEnable,
cm10gConfigPort2FecAmplitude, cm10gConfigPort2FecPhase, cm10gConfigPort2WavelengthEnable, cm10gConfigPort2WavelengthValue,
cm10gConfigPort2ChannelEnable, cm10gConfigPort2ChannelNumber, cm10gConfigPort2TxDitherEnable, cm10gConfigPort2TxDitherValue,
cm10gLedPWR,cm10gLedLK1,cm10gLedLK2,
exCMModelName,
exCMModelDesc,
exCMHwJmp5ConfigMode,
exCMHwSw1AutoLocalRemote,
exCMHwSw2Rate,
exCMHwSw3SymmetricAsymmetric,
exCMHwSw4SnrRatio,
exCMHwSw5Loopback,
exCMHwSw6EthAutoNeg,
exCMHwSw7EthSpeed,
exCMHwSw8EthDuplex,
exCMHwSw9LinkMode,
exCMHwSw10InterlinkFaultFeedback,
exCMVdslLinkStatus,
exCMVdslConnType,
exCMVdslLoopBack,
exCMVdslRole,
exCMVdslProfile,
exCMVdslBitswapping,
exCMVdslStatusAttainableDataRateUp,
exCMVdslStatusAttainableDataRateDown,
exCMVdslStatusActualDataRateUp,
exCMVdslStatusActualDataRateDown,
exCMVdslStatusPrevDataRateUp,
exCMVdslStatusPrevDataRateDown,
exCMVdslStatusActualSnrUp,
exCMVdslStatusActualSnrDown,
exCMVdslStatusActualSnrUs0,
exCMVdslStatusActualSnrUs1,
exCMVdslStatusActualSnrDs1,
exCMVdslStatusActualSnrUs2,
exCMVdslStatusActualSnrDs2,
exCMVdslStatusActualSnrUs3,
exCMVdslStatusActualSnrDs3,
exCMVdslStatusActualSnrUs4,
exCMVdslStatusActualSnrDs4,
exCMVdslStatusActualSignalAttenuationUp,
exCMVdslStatusActualSignalAttenuationDown,
exCMVdslStatusActualSignalAttenuationUs0,
exCMVdslStatusActualSignalAttenuationUs1,
exCMVdslStatusActualSignalAttenuationDs1,
exCMVdslStatusActualSignalAttenuationUs2,
exCMVdslStatusActualSignalAttenuationDs2,
exCMVdslStatusActualSignalAttenuationUs3,
exCMVdslStatusActualSignalAttenuationDs3,
exCMVdslStatusActualSignalAttenuationUs4,
exCMVdslStatusActualSignalAttenuationDs4,
exCMVdslStatusActualLineAttenuationUp,
exCMVdslStatusActualLineAttenuationDown,
exCMVdslStatusActualLineAttenuationUs0,
exCMVdslStatusActualLineAttenuationUs1,
exCMVdslStatusActualLineAttenuationDs1,
exCMVdslStatusActualLineAttenuationUs2,
exCMVdslStatusActualLineAttenuationDs2,
exCMVdslStatusActualLineAttenuationUs3,
exCMVdslStatusActualLineAttenuationDs3,
exCMVdslStatusActualLineAttenuationUs4,
exCMVdslStatusActualLineAttenuationDs4,
exCMVdslStatusActualInterleaveDelayUp,
exCMVdslStatusActualInterleaveDelayDown,
exCMVdslStatusActualInpUp,
exCMVdslStatusActualInpDown,
exCMVdslStatusActualInterleavingDepthUp,
exCMVdslStatusActualInterleavingDepthDown,
exCMVdslStatusActualInterleavingBlockUp,
exCMVdslStatusActualInterleavingBlockDown,
exCMVdslStatusActualTransmitPowerUp,
exCMVdslStatusActualTransmitPowerDown,
exCMVdslStatusMaxDataRateUp,
exCMVdslStatusMaxDataRateDown,
exCMVdslStatusMinDataRateUp,
exCMVdslStatusMinDataRateDown,
exCMVdslStatusTargetSnrUp,
exCMVdslStatusTargetSnrDown,
exCMVdslStatusMaxInterleaveDelayUp,
exCMVdslStatusMaxInterleaveDelayDown,
exCMVdslStatusMinInpUp,
exCMVdslStatusMinInpDown,
exCMVdslRemoteLoopback,
exCMVdslRemoteReset,
exCMEthernetLinkStatus,
exCMEthernetConnType,
exCMEthernetAutoNegState,
exCMEthernetSpeed,
exCMEthernetDuplex,
exCMEthernetCrossOver,
exCMEthernetPauseEnh,
exCMEthernetLPRFStatus,
exCMEthernetAutoSpeedDownshift,
exCMEthernetMDI,
exCMVdslFirmwareVersion,
exCMVdslFirmwareDate,
exCMVdslFirmwareDateString,
exCMConfigStatus,
exCMConfigModuleName,
exCMConfigLinkMode,
exCMConfigInterlinkFaultFeedback,
exCMConfigVdslPortName,
exCMConfigVdslPortEnable,
exCMConfigVdslProfileMode,
exCMConfigVdslRole,
exCMConfigVdslRate,
exCMConfigVdslSymmetry,
exCMConfigVdslProfile,
exCMConfigVdslOverrideProfile,
exCMConfigVdslSignalToNoiseRatioUp,
exCMConfigVdslMinDataRateUp,
exCMConfigVdslMaxDataRateUp,
exCMConfigVdslMaxInterleaveDelayUp,
exCMConfigVdslMinInpUp,
exCMConfigVdslSignalToNoiseRatioDown,
exCMConfigVdslMinDataRateDown,
exCMConfigVdslMaxDataRateDown,
exCMConfigVdslMaxInterleaveDelayDown,
exCMConfigVdslMinInpDown,
exCMConfigVdslBitswapping,
exCMConfigVdslLowBandwidthAlarmUp,
exCMConfigVdslLowBandwidthAlarmDown,
exCMConfigEthernetPortName,
exCMConfigEthernetPortEnable,
exCMConfigEthernetAutoNegotiation,
exCMConfigEthernetAutoNegAdv10HDX,
exCMConfigEthernetAutoNegAdv10FDX,
exCMConfigEthernetAutoNegAdv100HDX,
exCMConfigEthernetAutoNegAdv100FDX,
exCMConfigEthernetAutoNegAdv1000FDX,
exCMConfigEthernetSpeed,
exCMConfigEthernetDuplex,
exCMConfigEthernetCrossOver,
exCMConfigEthernetPauseEnh,
exCMConfigEthernetAutoSpeedDownshift,
exCMConfigEthernet10BaseTDistance,
exCMConfigUnidirectionalEthernet,
exCMConfigPriorityToEgressQueueMap0,
exCMConfigPriorityToEgressQueueMap1,
exCMConfigPriorityToEgressQueueMap2,
exCMConfigPriorityToEgressQueueMap3,
exCMConfigPriorityToEgressQueueMap4,
exCMConfigPriorityToEgressQueueMap5,
exCMConfigPriorityToEgressQueueMap6,
exCMConfigPriorityToEgressQueueMap7,
exCMConfigEthernet8021pPriority,
exCMConfigEthernetIpTosPriority,
exCMConfigEthernetPriorityPrecedence,
exCMConfigEthernetCongestionPolicy,
exCMConfigEthernetPriorityMap0,
exCMConfigEthernetPriorityMap1,
exCMConfigEthernetPriorityMap2,
exCMConfigEthernetPriorityMap3,
exCMConfigEthernetPriorityMap4,
exCMConfigEthernetPriorityMap5,
exCMConfigEthernetPriorityMap6,
exCMConfigEthernetPriorityMap7,
exCMConfigEthernetIngressLimit,
exCMConfigEthernetEgressLimit,
exCMConfigEthernetDiscardTaggedFrames,
exCMConfigEthernetDiscardUntaggedFrames,
exCMConfigEthernetDefaultVlanId,
exCMConfigEthernetDefaultPriority,
exCMConfigEthernetVlanTaggingAction,
exCMConfigEthernetFilterUnknownMulticast,
exCMConfigEthernetFilterUnknownUnicast,
exCMConfigVdsl8021pPriority,
exCMConfigVdslIpTosPriority,
exCMConfigVdslPriorityPrecedence,
exCMConfigVdslCongestionPolicy,
exCMConfigVdslPriorityMap0,
exCMConfigVdslPriorityMap1,
exCMConfigVdslPriorityMap2,
exCMConfigVdslPriorityMap3,
exCMConfigVdslPriorityMap4,
exCMConfigVdslPriorityMap5,
exCMConfigVdslPriorityMap6,
exCMConfigVdslPriorityMap7,
exCMConfigVdslIngressLimit,
exCMConfigVdslEgressLimit,
exCMConfigVdslDiscardTaggedFrames,
exCMConfigVdslDiscardUntaggedFrames,
exCMConfigVdslDefaultVlanId,
exCMConfigVdslDefaultPriority,
exCMConfigVdslVlanTaggingAction,
exCMConfigVdslFilterUnknownMulticast,
exCMConfigVdslFilterUnknownUnicast,
exCMConfigVdslFastMode,
exCMLedILNK, exCMLedLOC, exCMLedPWR, exCMLedETH, exCMLedRMT,
exCMPortInDiscards,
exCMPortInFiltered,
exCMPortInGoodOctets,
exCMPortHCInGoodOctets,
exCMPortInBadOctets,
exCMPortInUnicasts,
exCMPortInBroadcasts,
exCMPortInMulticasts,
exCMPortInPauses,
exCMPortInUnderSizes,
exCMPortInFragments,
exCMPortInOversizes,
exCMPortInJabbers,
exCMPortInRxErrs,
exCMPortInFcsErrs,
exCMPortPkts64Octets,
exCMPortPkts65to127Octets,
exCMPortPkts128to255Octets,
exCMPortPkts256to511Octets,
exCMPortPkts512to1023Octets,
exCMPortPkts1024toMaxOctets,
exCMPortOutOctets,
exCMPortHCOutOctets,
exCMPortOutFiltered,
exCMPortOutUnicasts,
exCMPortOutBroadcasts,
exCMPortOutMulticasts,
exCMPortOutPauses,
exCMPortDeferreds,
exCMPortCollisions,
exCMPortSingles,
exCMPortMultiples,
exCMPortExcessives,
exCMPortLates,
exCMPortOutFcsErrs,
exCMPortResetCounters,
exCMVdslStatsTimePeriod,
exCMVdslStatsFullInitLocal,
exCMVdslStatsCodeViolationLocal,
exCMVdslStatsCorrectedLocal,
exCMVdslStatsFecSecsLocal,
exCMVdslStatsErroredSecsLocal,
exCMVdslStatsSeverelyErroredSecsLocal,
exCMVdslStatsLossOfSignalSecsLocal,
exCMVdslStatsUnavailableSecsLocal,
exCMVdslStatsTimeElapsedLocal,
exCMVdslStatsFullInitRemote,
exCMVdslStatsCodeViolationRemote,
exCMVdslStatsCorrectedRemote,
exCMVdslStatsFecSecsRemote,
exCMVdslStatsErroredSecsRemote,
exCMVdslStatsSeverelyErroredSecsRemote,
exCMVdslStatsLossOfSignalSecsRemote,
exCMVdslStatsUnavailableSecsRemote,
exCMVdslStatsTimeElapsedRemote,
exCMAvctStart,
exCMAvctStatus,
exCMAvctTxRxPair1Results,
exCMAvctTxRxPair1Amplitude,
exCMAvctTxRxPair1Distance,
exCMAvctTxRxPair2Results,
exCMAvctTxRxPair2Amplitude,
exCMAvctTxRxPair2Distance,
exCMAvctTxRxPair3Results,
exCMAvctTxRxPair3Amplitude,
exCMAvctTxRxPair3Distance,
exCMAvctTxRxPair4Results,
exCMAvctTxRxPair4Amplitude,
exCMAvctTxRxPair4Distance,
cm10gtModelname,
cm10gtModelDesc,
cm10gtHwJmp5ConfigMode,
cm10gtHwSw1OperationMode,
cm10gtHwSw2LinkMode,
cm10gtHwSw3FiberFaultAlert,
cm10gtHwSw4EnergyEfficentEthernet,
cm10gtHwSw5Unused,
cm10gtPort1LinkStatus,
cm10gtPort1ConnType,
cm10gtPort1AutoNegState,
cm10gtPort1Speed,
cm10gtPort1Duplex,
cm10gtPort1PauseEnh,
cm10gtPort1ReceiveStatus,
cm10gtPort1LPRFStatus,
cm10gtPort2LinkStatus,
cm10gtPort2ConnType,
cm10gtPort2AutoNegState,
cm10gtPort2Speed,
cm10gtPort2Duplex,
cm10gtPort2PauseEnh,
cm10gtPort2LPRFStatus,
cm10gtPortLoopBack,
cm10gtPortTestMode,
cm10gtConfigStatus,
cm10gtConfigModuleName,
cm10gtConfigLinkMode,
cm10gtConfigFiberFaultAlert,
cm10gtConfigFiberAutoNeg,
cm10gtConfigPort1Name,
cm10gtConfigPort1Enable,
cm10gtConfigPort1FecEnable,
cm10gtConfigPort1FecAmplitude,
cm10gtConfigPort1FecPhase,
cm10gtConfigPort1WavelengthEnable,
cm10gtConfigPort1WavelengthValue,
cm10gtConfigPort1ChannelEnable,
cm10gtConfigPort1ChannelNumber,
cm10gtConfigPort1TxDitherEnable,
cm10gtConfigPort1TxDitherValue,
cm10gtConfigPort2Name,
cm10gtConfigPort2Enable,
cm10gtConfigPort2CopperDuplex,
cm10gtConfigPort2CopperPauseEnh,
cm10gtConfigPort2CopperEnergyEfficientEthernet,
cm10gtLedsSlotIndex,
cm10gtLedPWR,
cm10gtLedLK1,
cm10gtLedLK2,
cm4gptModelname,
cm4gptModelDesc,
cm4gptHwJmp5ConfigMode,
cm4gptHwSw1LinkMode,
cm4gptHwSw2FiberFaultAlert,
cm4gptHwSw3RateSelect,
cm4gptHwSw4Unused,
cm4gptPort1LinkStatus,
cm4gptPort1ConnType,
cm4gptPort2LinkStatus,
cm4gptPort2ConnType,
cm4gptConfigStatus,
cm4gptConfigModuleName,
cm4gptConfigLinkMode,
cm4gptConfigFiberFaultAlert,
cm4gptConfigRateSelect,
cm4gptConfigPort1Name,
cm4gptConfigPort1Enable,
cm4gptConfigPort2Name,
cm4gptConfigPort2Enable,
cm4gptLedPWR,
cm4gptLedLK1,
cm4gptLedLK2,
mgtEthStatsName,mgtEthStatsMacAddress,mgtEthStatsStatus,mgtEthStatsSpeedDuplex,
mgtEthStatsBroadcast,mgtEthStatsDebug,mgtEthStatsLoopback,mgtEthStatsPointtoPoint,
mgtEthStatsNoTrailers,mgtEthStatsRunning,mgtEthStatsNoArp,mgtEthStatsPromiscuous,
mgtEthStatsRxMulticast,mgtEthStatsMasterLoadBalancer,mgtEthStatsSlaveLoadBalancer,
mgtEthStatsMulticast,mgtEthStatsSetMedia,mgtEthStatsAutoMedia,mgtEthStatsDynamic,
mgtEthStatsLocalAddress,mgtEthStatsSubnetMask,mgtEthStatsBroadcastAddress,mgtEthStatsMtu,
mgtEthStatsTxQLen,mgtEthStatsRxBytes,mgtEthStatsTxBytes,mgtEthStatsRxPackets,mgtEthStatsTxPackets,
mgtEthStatsRxErrors,mgtEthStatsTxPktErrors,mgtEthStatsRxDroppedPkts,mgtEthStatsTxDroppedPkts,
mgtEthStatsRxOverruns,mgtEthStatsTxOverruns,mgtEthStatsRxFrameErrs,mgtEthStatsTxCarrierErrs,
mgtEthStatsCollisions,
sfpDmiStatus,sfpDmiConnectorType,sfpDmiNominalBitRate,sfpDmiLinkReach9125,sfpDmiLinkReach50125,
sfpDmiLinkReach625125,sfpDmiFiberWaveLength,sfpDmiCurrentTempState,sfpDmiRealTimeTemp,sfpDmiHighTempWarn,
sfpDmiHighTempAlarm,sfpDmiLowTempWarn,sfpDmiLowTempAlarm,sfpDmiCurrentVoltState,
sfpDmiRealTimeVolt,sfpDmiHighVoltWarn,sfpDmiHighVoltAlarm,sfpDmiLowVoltWarn,sfpDmiLowVoltAlarm,
sfpDmiCurrentTxBiasState,sfpDmiRealTimeTxBias,sfpDmiHighTxBiasWarn,sfpDmiHighTxBiasAlarm,
sfpDmiLowTxBiasWarn,sfpDmiLowTxBiasAlarm,sfpDmiCurrentTxPowerState,sfpDmiRealTimeTxPower,
sfpDmiHighTxPowerWarn,sfpDmiHighTxPowerAlarm,sfpDmiLowTxPowerWarn,sfpDmiLowTxPowerAlarm,
sfpDmiCurrentRxPowerState,sfpDmiRealTimeRxPower,sfpDmiHighRxPowerWarn,sfpDmiHighRxPowerAlarm,
sfpDmiLowRxPowerWarn,sfpDmiLowRxPowerAlarm,sfpDmiStatus2,
sfpDmiVendorSerialNumber, sfpDmiVendorName, sfpDmiVendorPartNumber,
xfpDmiAux1Type, xfpDmiAux1State, xfpDmiRealTimeAux1, xfpDmiHighAux1Warn, xfpDmiHighAux1Alarm,
xfpDmiLowAux1Warn, xfpDmiLowAux1Alarm,
xfpDmiAux2Type, xfpDmiAux2State, xfpDmiRealTimeAux2, xfpDmiHighAux2Warn, xfpDmiHighAux2Alarm,
xfpDmiLowAux2Warn, xfpDmiLowAux2Alarm,
xfpDmiMinBitRate, xfpDmiMaxBitRate, xfpDmiReachEBW50125, sfpDmiReachCopper
}
STATUS current
DESCRIPTION
"The group of objects for identifying and determining the configuration and
current timeliness values of the Perle Managed Media Converters media converter modules"
::= { mcrMGTMIBGroups 2 }
--
-- end of mcrMGTMIBMediaGroup
--
--
-- mcrMGTMIBMgtGroup
--
mcrMGTMIBMgtGroup OBJECT-GROUP
OBJECTS {
systemStatus,systemName,systemDomainName,systemIpAddress,systemSubnetBits,systemDHCPUpdateDNS,
systemAutoObtainDNS,systemAutoObtainGW,systemDomainPrefix,
systemTFTPRetry,systemTFTPTimeOut,
gatewayStatus,gatewayHost,gatewayType,gatewayIpAddress,gatewaySubnetBits,gatewayInterface,
hostStatus,hostName,hostIpAddr,hostFqdn,
dnsStatus,dnsIpAddress,dnsActive,
dynamicDNSStatus,dynamicDNS,dynamicDNSHostname,dynamicDNSUserName,dynamicDNSPassword,
dynamicDNSSystemType,dynamicDNSWildCard,dynamicDNSConnectionMethod,dynamicDNSSSLVerifyPeerCertificate,
dynamicDNSSSLCountry ,dynamicDNSSSLStateProv ,dynamicDNSSSLLocality ,dynamicDNSSSLOrganisation,
dynamicDNSSSLOrganisationUnit ,dynamicDNSSSLCommonName ,dynamicDNSSSLEmail,
dynamicDNSStatusString,
dynamicDNSSSLCipherStatus,dynamicDNSSSLCipherEncryption,
dynamicDNSSSLCipherKeySizeMin,dynamicDNSSSLCipherKeySizeMax,dynamicDNSSSLCipherKeyExchange,
dynamicDNSSSLCipherHMAC,
ipv6serviceStatus, serviceAutoDiscovery, serviceDHCPv6,
serviceDHCPv6IPAddresses, serviceDHCPv6NetworkPrefix,serviceDHCPv6AutoObtainDNS,
ipv6AddressStatus,ipv6AddressAddr,ipv6AddressPrefixBits,ipv6AddressAuto ,ipv6AddressSendAdvertise,
interfacev6Name,interfacev6Address,interfacev6PrefixBits,interfacev6Scope,
ipv6TunnelStatus,ipv6TunnelName,ipv6TunnelMode,ipv6TunnelRemoteHost,
accessServicesStatus,accessServicesSessInactTimeout,accessServiceHTTPD,accessServiceHTTPSD,
accessServiceTelnetD,acessServiceSSHD,acessServiceSnmpD,acessServiceSetIP,acessIncomingPings,
webManagerStatus,httpsPassphrase,
sshServerStatus,sshServerAuthRSA,sshServerAuthDSA,sshServerAuthKeyboard,sshServerAuthPassword,
sshServerCipher3Des,sshServerCipherBlowfish,sshServerCipherCipherAES,sshServerCipherCAST,
sshServerCipherArcfour,sshServerVerbose,sshServerCompression,sshServerSSH1,
snmpAgentStatus,snmpContact,snmpLocation,
snmpCommunityStatus,snmpCommunityName,snmpCommunityIpAddress,snmpCommunityPermission,
snmpV3ReadOnlyStatus,snmpV3ReadOnlyUserName,snmpV3ReadOnlySecurityLevel,snmpV3ReadOnlyAuthAlgorithm,
snmpV3ReadOnlyAuthPasswd,snmpV3ReadOnlyPrivacyAlgorithm,snmpV3ReadOnlyPrivacyPasswd,
snmpV3ReadWriteStatus,snmpV3ReadWriteUserName,snmpV3ReadWriteSecurityLevel,
snmpV3ReadWriteAuthAlgorithm,snmpV3ReadWriteAuthPasswd,snmpV3ReadWritePrivacyAlgorithm,
snmpV3ReadWritePrivacyPasswd,snmpV3LocalEngineID, snmpV3LocalEngineIDTextSuffix,
authHostsStatus, authHostOnly,
authHostIpStatus,authHostIpAddr,authHostIpDescr,
authHostMacStatus,authHostMacAddr,authHostMacDescr,
localEventLogStatus,localEventLogEnabled,localEventLogAlertLevel,localEventLogClear,
syslogStatus,syslogEnabled,syslogSeverityLevel,snmpTrapHostIndex,syslogPrimaryHost,syslogSecondaryHost,
snmpTrapStatus,snmpTrapEnabled,snmpTrapAlertLevel,
snmpTrapHostStatus,snmpTrapHostIpAddress,snmpTrapHostUdpPort,snmpTrapHostVersion,
snmpTrapHostType,snmpTrapHostCommunity,snmpTrapHostEnable, snmpV3TrapUserStatus,
snmpV3TrapUserUserName,snmpV3TrapUserSecurityLevel,snmpV3TrapUserAuthAlgorithm,
snmpV3TrapUserAuthPasswd,snmpV3TrapUserPrivacyAlgorithm,snmpV3TrapUserPrivacyPasswd,
snmpTrapGlbHostTimeout,snmpTapGlobHostRetries,
mgtAccessMethod,remoteMgtIpAddress,remoteTftpHost,remoteTftpFileName,networkIpAddress,
mcrMediaPortNum,mcrMediaPortDescr, eventSeverityLevel,
xfpDmiRealTimeAux, xfpDmiHighAuxWarn, xfpDmiHighAuxAlarm, xfpDmiLowAuxWarn, xfpDmiLowAuxAlarm,
mcrModuleSubTypeInserted, mcrMediaBackedupModuleSubType, mcrMediaPortBandwidth, mcrMediaPortBandwidthThreshold,
emailStatus,emailEnabled,emailAlertLevel,emailTo,emailFrom,emailSMTPHost,emailReply,
emailSubject,emailSMTPUsername,emailSMTPPassword,emailSMTPEncryption,emailSMTPValidatePeerCertificate,
emailSMTPTcpPort,emailSMTPDomain,
mgtUsersStatus,mgtUsersByPassLoginEnabled,mgtUsersPrimaryAuthMethod,mgtUsersSecondaryAuthMethod,
mgtUsersAlwaysAttemptSecond,
userStatus,userName,userPassword,userLevel,
userStatusName,userStatusRemoteIPAddress,userStatusStartTime,
userStatusLevel,
radiusStatus,radiusPrimaryAuthHost,radiusSecondaryAuthHost,radiusAuthenticationPort,
radiusAccounting,radiusPrimaryAcctHost,radiusSecondaryAcctHost,radiusAccountingPort,
radiusAcctAuth,radiusRetryLimit,radiusTimeout,radiusNasIdentifier,radiusNasIpAddress,
radiusNasSpecifyIpAddress,radiusNasIpv6Address,radiusNasSpecifyIpv6Address,
kerberosStatus,kerberosRealm,kerberosDomain,kerberosPort,
ldapStatus,ldapHost,ldapPort,ldapBase,ldapEnableTLS,ldapTLSPort,ldapUID,ldapPasswordEncryption,
ldapClientAuth,ldapClientName,ldapClientAppendBase,ldapClientPassword,
tacacsStatus,tacacsPrimaryHost,tacacsSecondaryHost,tacacsPort,tacacsAccounting,
tacacsAccountingPrimaryHost,tacacsAccountingSecondaryHost,tacacsAccountingPort,
tacacsAuthorization,tacacsAlternateServiceNames,
securidStatus,securidMasterHost,securidSlaveHost,securidPort,securidType,securidLegacy,
nisStatus,nisDomain,nisPrimaryHost,nisSecondaryHost,
mgtDateTimeStatus,systemDate,systemTime,systemDateTimeAndOffset,timeZoneListEnable,
selectionFromTimeZoneList,timeZoneAdjustForDST,
customTimeZoneStatus,timeZoneName,timeOffset,timeSummerName,timeSummerOffset,
timeSummerMode,timeSummerRecStartMonth,timeSummerRecStartWeek,timeSummerRecStartDay,
timeSummerRecStartHour,timeSummerRecStartMin,timeSummerRecEndMonth,timeSummerRecEndWeek,
timeSummerRecEndDay,timeSummerRecEndHour,timeSummerRecEndMin,timeSummerFixStartMonth,
timeSummerFixStartDay,timeSummerFixStartHour,timeSummerFixStartMinute,timeSummerFixEndMonth,
timeSummerFixEndDay,timeSummerFixEndHour,timeSummerFixEndMinute,
timeStatus,timeSntpMode,timeSntpVersion,timeSntpHost1,timeSntpHost2,timeSntpServerAuthentication,
timeSntpKeyID,timeSntpKeyID2,
sntpStatAddress,sntpStatLastUpdate,sntpStatLeapIndicator,sntpStatVersion,sntpStatMode,
sntpStatStratum,sntpStatRefId,sntpStatOffset,
bootFileStatus,fileFirmwareHost,fileFirmwareName,fileConfigurationHost,fileConfigurationName,
firmwareUpdateStatus, firmwareUpdateAuto,
firmwareUpdateBundleVersionCm100, firmwareUpdateBundleVersionCm110,
firmwareUpdateBundleVersionCm1000OrCm1000Sfp,
firmwareUpdateBundleVersionCm1110, firmwareUpdateBundleVersionCm1110Sfp,
firmwareUpdateBundleVersionCm100mm, firmwareUpdateBundleVersionCm1000mm, firmwareUpdateBundleVersionCm10g,
nettxfrStatus, nettxfrDirection, nettxfrFileType, nettxfrFileHost, nettxfrFileName,
nettxfrMCSlotNumber, nettxfrUserName, nettxfrSSHKeyType, nettxfrSSLType, nettxfrSessionInUse,
nettxfrTftpPort,
adminFunction,adminLastFunction,adminStatus,adminbootReason,adminDiagFileAvailable,
displayFormatStatus,cfgTemperatureUnits,cfgSfpPowerUnits,cfgTimeFormat,cfgDateFormat,
powerSchedConifgStatus,powerSchedOnHour,powerSchedOnMinute,
powerSchedOffHour,powerSchedOffMinute
}
STATUS current
DESCRIPTION
"The group of objects for identifying and determining the configuration and
current timeliness values of the Perle Managed Media Converters media converter modules"
::= { mcrMGTMIBGroups 3 }
--
-- end of mcrMGTMIBMgtGroup
--
--
-- mcrMGTMIBNotificationsGroup
--
mcrMGTMIBNotificationsGroup NOTIFICATION-GROUP
NOTIFICATIONS {
mcrMgtModuleInserted,mcrMgtSystemBoot,mcrMgtReset,
mcrMgtResetFactory,mcrMgtEtheLinkUp,mcrMgtEtheLinkDown,
mcrMgtConMonDSRSigChg,mcrMgtAuthFail,mcrMgtAuthSuccess,
mcrMgtDateTimeChg,mcrMgtSntpServFail,mcrMgtSntpServRec,
mcrMgtSnmpTrapHostFail,mcrMgtSnmpTrapHostRec,mcrMgtEmailServFail,
mcrMgtEmailServRec,mcrMgtConfSavedFlash,mcrMgtIpAddrDynChg,
mcrMgtTftpUploadFail,mcrMgtTftpUploadSuccess,mcrMgtTftpDownloadFail,
mcrMgtTftpDownloadSuccess,mcrMgtChassisMismatch,
mcrChassisAdd,mcrChassisRemove,mcrChassisReset,
mcrChassisTemperatureAlarm,mcrChassisTemperatureRecover,
mcrChassisSlotPoweredOn,mcrChassisSlotPoweredOff,mcrChassisFail,
mcrChassisOk,mcrPsmuInserted,
mcrPsmuRemoved,mcrPsmuPsuFail,mcrPsmuPsuOk,
mcrPsmuPsuVoltageFail,mcrPsmuPsuVoltageOk,mcrPsmuFanFail,
mcrPsmuFanOk,
mcrMediaInserted,mcrMediaRemoved,mcrMediaReset,
mcrMediaLostCommunication,mcrMediaRecovCommunication,
mcrMediaFail,mcrMediaOk,mcrMediaLinkUp,
mcrMediaLinkDown,mcrMediaConfUpdateFail,mcrMediaConfUpdateSuccess,
mcrMediaConfMismatch,mcrMediaConfMismatchResolv,mcrMediaFirmwareUpdateFail,
mcrMediaFirmwareUpdateSuccess,
mcrSfpInserted,mcrSfpRemoved,
mcrSfpHighTempWarn,mcrSfpHighTempWarnRecov,mcrSfpHighTempAlarm,
mcrSfpHighTempAlarmRecov,mcrSfpLowTempWarn,mcrSfpLowTempWarnRecov,
mcrSfpLowTempAlarm,mcrSfpLowTempAlarmRecov,
mcrSfpHighVoltWarn,mcrSfpHighVoltWarnRecov,mcrSfpHighVoltAlarm,
mcrSfpHighVoltAlarmRecov,mcrSfpLowVoltWarn,mcrSfpLowVoltWarnRecov,
mcrSfpLowVoltAlarm,mcrSfpLowVoltAlarmRecov,
mcrSfpHighTxBiasWarn,mcrSfpHighTxBiasWarnRecov,mcrSfpHighTxBiasAlarm,
mcrSfpHighTxBiasAlarmRecov,mcrSfpLowTxBiasWarn,mcrSfpLowTxBiasWarnRecov,
mcrSfpLowTxBiasAlarm,mcrSfpLowTxBiasAlarmRecov,
mcrSfpHighTxPowerWarn,mcrSfpHighTxPowerWarnRecov,mcrSfpHighTxPowerAlarm,
mcrSfpHighTxPowerAlarmRecov,mcrSfpLowTxPowerWarn,mcrSfpLowTxPowerWarnRecov,
mcrSfpLowTxPowerAlarm,mcrSfpLowTxPowerAlarmRecov,
mcrSfpHighRxPowerWarn,mcrSfpHighRxPowerWarnRecov,mcrSfpHighRxPowerAlarm,
mcrSfpHighRxPowerAlarmRecov,mcrSfpLowRxPowerWarn,mcrSfpLowRxPowerWarnRecov,
mcrSfpLowRxPowerAlarm,mcrSfpLowRxPowerAlarmRecov,
mcrChassisCommTempSensorFail,mcrChassisCommTempSensorRecov,
mcrMediaDetectFail,mcrMediaBadImage,mcrSfpLostComm,mcrSfpRecovComm,
mcrModuleNotSupported, mcrModuleFirmwareUpdate,
mcrSfpPortShutdown, mcrSfpPortShutdownRecov,
mcrXfpHighApdBiasWarn, mcrXfpHighApdBiasWarnRecov, mcrXfpHighApdBiasAlarm, mcrXfpHighApdBiasAlarmRecov,
mcrXfpLowApdBiasWarn, mcrXfpLowApdBiasWarnRecov, mcrXfpLowApdBiasAlarm, mcrXfpLowApdBiasAlarmRecov,
mcrXfpHighTecCurrentWarn, mcrXfpHighTecCurrentWarnRecov, mcrXfpHighTecCurrentAlarm, mcrXfpHighTecCurrentAlarmRecov,
mcrXfpLowTecCurrentWarn, mcrXfpLowTecCurrentWarnRecov, mcrXfpLowTecCurrentAlarm, mcrXfpLowTecCurrentAlarmRecov,
mcrXfpHighLaserTempWarn, mcrXfpHighLaserTempWarnRecov, mcrXfpHighLaserTempAlarm, mcrXfpHighLaserTempAlarmRecov,
mcrXfpLowLaserTempWarn, mcrXfpLowLaserTempWarnRecov, mcrXfpLowLaserTempAlarm, mcrXfpLowLaserTempAlarmRecov,
mcrXfpHighLaserWavelengthWarn, mcrXfpHighLaserWavelengthWarnRecov, mcrXfpHighLaserWavelengthAlarm, mcrXfpHighLaserWavelengthAlarmRecov,
mcrXfpLowLaserWavelengthWarn, mcrXfpLowLaserWavelengthWarnRecov, mcrXfpLowLaserWavelengthAlarm, mcrXfpLowLaserWavelengthAlarmRecov,
mcrXfpHigh5VoltWarn, mcrXfpHigh5VoltWarnRecov, mcrXfpHigh5VoltAlarm, mcrXfpHigh5VoltAlarmRecov,
mcrXfpLow5VoltWarn, mcrXfpLow5VoltWarnRecov, mcrXfpLow5VoltAlarm, mcrXfpLow5VoltAlarmRecov,
mcrXfpHigh33VoltWarn, mcrXfpHigh33VoltWarnRecov, mcrXfpHigh33VoltAlarm, mcrXfpHigh33VoltAlarmRecov,
mcrXfpLow33VoltWarn, mcrXfpLow33VoltWarnRecov, mcrXfpLow33VoltAlarm, mcrXfpLow33VoltAlarmRecov,
mcrXfpHigh18VoltWarn, mcrXfpHigh18VoltWarnRecov, mcrXfpHigh18VoltAlarm, mcrXfpHigh18VoltAlarmRecov,
mcrXfpLow18VoltWarn, mcrXfpLow18VoltWarnRecov, mcrXfpLow18VoltAlarm, mcrXfpLow18VoltAlarmRecov,
mcrXfpHighM52VoltWarn, mcrXfpHighM52VoltWarnRecov, mcrXfpHighM52VoltAlarm, mcrXfpHighM52VoltAlarmRecov,
mcrXfpLowM52VoltWarn, mcrXfpLowM52VoltWarnRecov, mcrXfpLowM52VoltAlarm, mcrXfpLowM52VoltAlarmRecov,
mcrXfpHigh5VCurrentWarn, mcrXfpHigh5VCurrentWarnRecov, mcrXfpHigh5VCurrentAlarm, mcrXfpHigh5VCurrentAlarmRecov,
mcrXfpLow5VCurrentWarn, mcrXfpLow5VCurrentWarnRecov, mcrXfpLow5VCurrentAlarm, mcrXfpLow5VCurrentAlarmRecov,
mcrXfpHigh33VCurrentWarn, mcrXfpHigh33VCurrentWarnRecov, mcrXfpHigh33VCurrentAlarm, mcrXfpHigh33VCurrentAlarmRecov,
mcrXfpLow33VCurrentWarn, mcrXfpLow33VCurrentWarnRecov, mcrXfpLow33VCurrentAlarm, mcrXfpLow33VCurrentAlarmRecov,
mcrXfpHigh18VCurrentWarn, mcrXfpHigh18VCurrentWarnRecov, mcrXfpHigh18VCurrentAlarm, mcrXfpHigh18VCurrentAlarmRecov,
mcrXfpLow18VCurrentWarn, mcrXfpLow18VCurrentWarnRecov, mcrXfpLow18VCurrentAlarm, mcrXfpLow18VCurrentAlarmRecov,
mcrXfpHighM52VCurrentWarn, mcrXfpHighM52VCurrentWarnRecov, mcrXfpHighM52VCurrentAlarm, mcrXfpHighM52VCurrentAlarmRecov,
mcrXfpLowM52VCurrentWarn, mcrXfpLowM52VCurrentWarnRecov, mcrXfpLowM52VCurrentAlarm, mcrXfpLowM52VCurrentAlarmRecov,
mcrXfpHighVCC5Warn, mcrXfpHighVCC5WarnRecov, mcrXfpHighVCC5Alarm, mcrXfpHighVCC5AlarmRecov,
mcrXfpLowVCC5Warn, mcrXfpLowVCC5WarnRecov, mcrXfpLowVCC5Alarm, mcrXfpLowVCC5AlarmRecov,
mcrXfpHighVCC3Warn, mcrXfpHighVCC3WarnRecov, mcrXfpHighVCC3Alarm, mcrXfpHighVCC3AlarmRecov,
mcrXfpLowVCC3Warn, mcrXfpLowVCC3WarnRecov, mcrXfpLowVCC3Alarm, mcrXfpLowVCC3AlarmRecov,
mcrXfpHighVCC2Warn, mcrXfpHighVCC2WarnRecov, mcrXfpHighVCC2Alarm, mcrXfpHighVCC2AlarmRecov,
mcrXfpLowVCC2Warn, mcrXfpLowVCC2WarnRecov, mcrXfpLowVCC2Alarm, mcrXfpLowVCC2AlarmRecov,
mcrXfpHighVEE5Warn, mcrXfpHighVEE5WarnRecov, mcrXfpHighVEE5Alarm, mcrXfpHighVEE5AlarmRecov,
mcrXfpLowVEE5Warn, mcrXfpLowVEE5WarnRecov, mcrXfpLowVEE5Alarm, mcrXfpLowVEE5AlarmRecov,
mcrSfpSpeedMismatch, mcrSfpSpeedMismatchRecov, mcrXfpPowerExceeded, mcrXfpPowerExceededRecov,
mcrLinkTestError, mcrAlarmRelayEngaged, mcrAlarmRelayDisengaged,
mcrBandwidthLevelUpstreamLow, mcrBandwidthLevelUpstreamRecov,
mcrBandwidthLevelDownstreamLow, mcrBandwidthLevelDownstreamRecov,
mcrMediaRemoteReset
}
STATUS current
DESCRIPTION
"The group of notifications (traps) which is implemented for the
Perle Managed Media Converters."
::= { mcrMGTMIBGroups 4 }
--
-- end of mcrMGTMIBNotificationsGroup
--
END
Reference in New Issue View Git Blame Copy Permalink