mibs/MIBS/pfsense/BEGEMOT-WIRELESS-MIB
2023-12-05 12:25:34 +01:00

3899 lines
107 KiB
Plaintext

--
-- Copyright (C) 2010 The FreeBSD Foundation
-- All rights reserved.
--
-- This documentation was written by Shteryana Sotirova Shopova under
-- sponsorship from the FreeBSD Foundation.
--
-- Redistribution and use in source and binary forms, with or without
-- modification, are permitted provided that the following conditions
-- are met:
-- 1. Redistributions of source code must retain the above copyright
-- notice, this list of conditions and the following disclaimer.
-- 2. Redistributions in binary form must reproduce the above copyright
-- notice, this list of conditions and the following disclaimer in the
-- documentation and/or other materials provided with the distribution.
--
-- THIS SOFTWARE IS PROVIDED BY AUTHOR AND CONTRIBUTORS ``AS IS'' AND
-- ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-- IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-- ARE DISCLAIMED. IN NO EVENT SHALL AUTHOR OR CONTRIBUTORS BE LIABLE
-- FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-- DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-- OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-- HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-- LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-- OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-- SUCH DAMAGE.
--
-- $FreeBSD: releng/10.1/usr.sbin/bsnmpd/modules/snmp_wlan/BEGEMOT-WIRELESS-MIB.txt 229653 2012-01-05 21:36:28Z uqs $
--
BEGEMOT-WIRELESS-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
Counter32, Integer32, TimeTicks, Unsigned32, mib-2
FROM SNMPv2-SMI
TEXTUAL-CONVENTION, MacAddress, TruthValue, RowStatus,
DisplayString
FROM SNMPv2-TC
InterfaceIndex, ifIndex FROM IF-MIB
begemot
FROM BEGEMOT-MIB;
begemotWlan MODULE-IDENTITY
LAST-UPDATED "201005170000Z"
ORGANIZATION "The FreeBSD Foundation"
CONTACT-INFO
" Shteryana Shopova
Postal: 12 Andrey Lyapchev Blvd.
block 2, ap.19
1797 Sofia
Bulgaria
Fax: N/A
E-Mail: syrinx@FreeBSD.org"
DESCRIPTION
"The Begemot MIB for managing IEEE802.11 interfaces."
REVISION "201005170000Z"
DESCRIPTION
"Initial revision."
::= { begemot 210 }
-- ---------------------------------------------------------- --
-- Textual conventions
-- ---------------------------------------------------------- --
WlanMgmtReasonCode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Enumeration of reason and codes used in IEEE802.11
management frames to indicate why an action took place."
SYNTAX INTEGER {
unspecified(1),
authenticationExpire(2),
authenticationLeave(3),
associationExpire(4),
associationTooMany(5),
notAuthenticated(6),
notAssociated(7),
associationLeave(8),
associationNotAuthenticated(9),
-- XXX: TODO - FIXME
dissassocPwrcapBad(10),
dissassocSuperchanBad(11),
ieInvalid(13),
micFailure(14),
fourWayHandshakeTimeout(15),
groupKeyUpdateTimeout(16),
ieIn4FourWayDiffers(17),
groupCipherInvalid(18),
pairwiseCiherInvalid(19),
akmpInvalid(20),
unsupportedRsnIeVersion(21),
invalidRsnIeCap(22),
dot1xAuthFailed(23),
cipherSuiteRejected(24),
unspeciffiedQos(32),
insufficientBw(33),
tooManyFrames(34),
outsideTxOp(35),
leavingQbss(36),
badMechanism(37),
setupNeeded(38),
timeout(39)
}
WlanMgmtMeshReasonCode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Enumeration of reason and codes used in IEEE802.11
mesh routing management frames to indicate why an
action took place."
SYNTAX INTEGER {
-- XXX: TODO - FIXME
peerLinkCancelled(2),
maxPeers(3),
cpViolation(4),
closeRcvd(5),
maxRetries(6),
confirmTimeout(7),
invalidGtk(8),
inconsistentParams(9),
invalidSecurity(10),
perrUnspecified(11),
perrNoFI(12),
perrDestUnreach(13)
}
WlanMgmtStatusCode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Enumeration of reason and codes used in IEEE802.11
management frames to indicate what the result of an
operation is."
SYNTAX INTEGER {
-- XXX: TODO - FIXME
success(0),
unspecified(1),
capabilitiesInfo(10),
notAssociated(11),
other(12),
algorithm(13),
sequence(14),
challenge(15),
timeout(16),
tooMany(17),
basicRate(18),
spRequired(19),
pbccRequired(20),
caRequired(21),
specMgmtRequired(22),
pwrcapRequire(23),
superchanRequired(24),
shortSlotRequired(25),
dssofdmRequired(26),
missingHTCaps(27),
invalidIE(40),
groupCipherInvalid(41),
pairwiseCipherInvalid(42),
akmpInvalid(43),
unsupportedRsnIEVersion(44),
invalidRsnIECap(45),
cipherSuiteRejected(46)
}
WlanRegDomainCode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Enumeration of regdomain codes."
SYNTAX INTEGER {
fcc(1),
ca(2),
etsi(3),
etsi2(4),
etsi3(5),
fcc3(6),
japan(7),
korea(8),
apac(9),
apac2(10),
apac3(11),
row(12),
none(13),
debug(14),
sr9(15),
xr9(16),
gz901(17)
}
WlanIfaceDot11nPduType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Enumeration of values for PDU transmit/receive enabled."
SYNTAX INTEGER {
disabled(0),
rxOnly(1),
txOnly(2),
txAndRx(3)
}
WlanPeerCapabilityFlags ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A list of capability bits that may be advertised by a peer."
SYNTAX BITS {
ess(1),
ibss(2),
cfPollable(3),
cfPollRequest(4),
privacy(5),
shortPreamble(6),
pbcc(7),
channelAgility(8),
shortSlotTime(9),
rsn(10),
dsssofdm(11)
}
WlanIfPhyMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A list of wireless PHY operating modes."
SYNTAX INTEGER {
auto(1),
dot11a(2),
dot11b(3),
dot11g(4),
fh(5),
turboA(6),
turboG(7),
sturboA(8),
dot11na(9),
dot11ng(10),
ofdmHalf(11),
ofdmQuarter(12)
}
-- ---------------------------------------------------------- --
-- Subtrees in the Begemot Wireless MIB
-- ---------------------------------------------------------- --
begemotWlanNotifications OBJECT IDENTIFIER ::= { begemotWlan 0 }
begemotWlanInterface OBJECT IDENTIFIER ::= { begemotWlan 1 }
begemotWlanScanning OBJECT IDENTIFIER ::= { begemotWlan 2 }
begemotWlanStatistics OBJECT IDENTIFIER ::= { begemotWlan 3 }
begemotWlanWep OBJECT IDENTIFIER ::= { begemotWlan 4 }
begemotWlanMACAccessControl OBJECT IDENTIFIER ::= { begemotWlan 5 }
begemotWlanMeshRouting OBJECT IDENTIFIER ::= { begemotWlan 6 }
-- ---------------------------------------------------------- --
-- begemotWlanMultimedia OBJECT IDENTIFIER ::= { begemotWlan 7 }
-- ---------------------------------------------------------- --
-- ---------------------------------------------------------- --
-- Cloned wireless interfaces' database
-- ---------------------------------------------------------- --
wlanInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF WlanInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains the list of cloned wireless
interfaces created on the system."
::= { begemotWlanInterface 1 }
wlanInterfaceEntry OBJECT-TYPE
SYNTAX WlanInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information for a cloned wireless interface."
INDEX { wlanIfaceName }
::= { wlanInterfaceTable 1 }
WlanInterfaceEntry ::= SEQUENCE {
wlanIfaceIndex InterfaceIndex,
wlanIfaceName DisplayString,
wlanParentIfName DisplayString,
wlanIfaceOperatingMode INTEGER,
wlanIfaceFlags BITS,
wlanIfaceBssid MacAddress,
wlanIfaceLocalAddress MacAddress,
wlanIfaceStatus RowStatus,
wlanIfaceState INTEGER
}
wlanIfaceIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ifIndex of this cloned wireless interface."
::= { wlanInterfaceEntry 1 }
wlanIfaceName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The name of this cloned wireless interface."
::= { wlanInterfaceEntry 2 }
wlanParentIfName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The name of this cloned wireless interface's parent hardware
interface."
::= { wlanInterfaceEntry 3 }
wlanIfaceOperatingMode OBJECT-TYPE
SYNTAX INTEGER {
ibss(0),
station(1),
wds(2),
adhocDemo(3),
hostAp(4),
monitor(5),
meshPoint(6),
tdma(7)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The desired operating mode of the cloned wireless interface."
DEFVAL { station }
::= { wlanInterfaceEntry 4 }
wlanIfaceFlags OBJECT-TYPE
SYNTAX BITS {
uniqueBssid(1),
noBeacons(2),
wdsLegacy(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Flags per cloned wireless interface used during creation."
::= { wlanInterfaceEntry 5 }
wlanIfaceBssid OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The BSSID assigned to a cloned wireless interface operating in
WDS mode."
::= { wlanInterfaceEntry 6 }
wlanIfaceLocalAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The unique local MAC address assigned to the cloned wireless
interface during creation."
::= { wlanInterfaceEntry 7 }
wlanIfaceStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This column allows creation or deletion of cloned wireless
interfaces."
::= { wlanInterfaceEntry 8 }
wlanIfaceState OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The operating state of the interface."
::= { wlanInterfaceEntry 9 }
wlanIfParentTable OBJECT-TYPE
SYNTAX SEQUENCE OF WlanIfParentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains information about the parent hardware
interface of every cloned wireless interface in the system."
::= { begemotWlanInterface 2 }
wlanIfParentEntry OBJECT-TYPE
SYNTAX WlanIfParentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information for the parent hardware interface of a cloned
wireless interface."
AUGMENTS { wlanInterfaceEntry }
::= { wlanIfParentTable 1 }
WlanIfParentEntry ::= SEQUENCE {
wlanIfParentDriverCapabilities BITS,
wlanIfParentCryptoCapabilities BITS,
wlanIfParentHTCapabilities BITS
}
wlanIfParentDriverCapabilities OBJECT-TYPE
SYNTAX BITS {
station(1),
ieee8023encap(2),
athFastFrames(3),
athTurbo(4),
ibss(5),
pmgt(6),
hostAp(7),
ahDemo(8),
swRetry(9),
txPmgt(10),
shortSlot(11),
shortPreamble(12),
monitor(13),
dfs(14),
mbss(15),
wpa1(16),
wpa2(17),
burst(18),
wme(19),
wds(20),
bgScan(21),
txFrag(22),
tdma(23)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The driver capabilities of this cloned interface's parent."
::= { wlanIfParentEntry 1 }
wlanIfParentCryptoCapabilities OBJECT-TYPE
SYNTAX BITS {
wep(1),
tkip(2),
aes(3),
aesCcm(4),
tkipMic(5),
ckip(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The hardware cryptographic capabilities of this cloned
interface's parent."
::= { wlanIfParentEntry 2 }
wlanIfParentHTCapabilities OBJECT-TYPE
SYNTAX BITS {
ldpc(1),
chwidth40(2),
greenField(3),
shortGi20(4),
shortGi40(5),
txStbc(6),
delba(7),
amsdu7935(8),
dssscck40(9),
psmp(10),
fortyMHzIntolerant(11),
lsigTxOpProt(12),
htcAmpdu(13),
htcAmsdu(14),
htcHt(15),
htcSmps(16),
htcRifs(17)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The hardware High Throughput capabilities of this cloned
interface's parent."
::= { wlanIfParentEntry 3 }
wlanIfaceConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF WlanIfaceConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains a list of configuration parameters per
cloned wireless interface. Some of the parameters may not be
applicable depending on the underlying device's hardware
capabilities and operating mode of the virtual interface."
::= { begemotWlanInterface 3 }
wlanIfaceConfigEntry OBJECT-TYPE
SYNTAX WlanIfaceConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of configuration parameters for a cloned wireless interface."
AUGMENTS { wlanInterfaceEntry }
::= { wlanIfaceConfigTable 1 }
WlanIfaceConfigEntry ::= SEQUENCE {
wlanIfacePacketBurst TruthValue,
wlanIfaceCountryCode OCTET STRING,
wlanIfaceRegDomain INTEGER,
wlanIfaceDesiredSsid OCTET STRING,
wlanIfaceDesiredChannel INTEGER,
wlanIfaceDynamicFreqSelection TruthValue,
wlanIfaceFastFrames TruthValue,
wlanIfaceDturbo TruthValue,
wlanIfaceTxPower INTEGER,
wlanIfaceFragmentThreshold INTEGER,
wlanIfaceRTSThreshold INTEGER,
wlanIfaceWlanPrivacySubscribe TruthValue,
-- Parameters for station mode
wlanIfaceBgScan TruthValue,
wlanIfaceBgScanIdle INTEGER,
wlanIfaceBgScanInterval INTEGER,
wlanIfaceBeaconMissedThreshold INTEGER,
wlanIfaceDesiredBssid MacAddress,
wlanIfaceRoamingMode INTEGER,
-- Additional parameters when operating in host-ap/ad-hoc mode
wlanIfaceDot11d TruthValue,
wlanIfaceDot11h TruthValue,
wlanIfaceDynamicWds TruthValue,
wlanIfacePowerSave TruthValue,
wlanIfaceApBridge TruthValue,
wlanIfaceBeaconInterval INTEGER,
wlanIfaceDtimPeriod INTEGER,
wlanIfaceHideSsid TruthValue,
wlanIfaceInactivityProccess TruthValue,
wlanIfaceDot11gProtMode INTEGER,
wlanIfaceDot11gPureMode TruthValue,
wlanIfaceDot11nPureMode TruthValue,
wlanIfaceDot11nAmpdu INTEGER,
wlanIfaceDot11nAmpduDensity INTEGER,
wlanIfaceDot11nAmpduLimit INTEGER,
wlanIfaceDot11nAmsdu INTEGER,
wlanIfaceDot11nAmsduLimit INTEGER,
wlanIfaceDot11nHighThroughput TruthValue,
wlanIfaceDot11nHTCompatible TruthValue,
wlanIfaceDot11nHTProtMode INTEGER,
wlanIfaceDot11nRIFS TruthValue,
wlanIfaceDot11nShortGI TruthValue,
wlanIfaceDot11nSMPSMode INTEGER,
-- Parameters when operating in tdma mode
wlanIfaceTdmaSlot INTEGER,
wlanIfaceTdmaSlotCount INTEGER,
wlanIfaceTdmaSlotLength INTEGER,
wlanIfaceTdmaBeaconInterval INTEGER
}
wlanIfacePacketBurst OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object controls whether packet bursting is
enabled on the interface."
::= { wlanIfaceConfigEntry 1 }
wlanIfaceCountryCode OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(3))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object controls the country regulatory
constraints for operation of this wireless interface. The first
two octets of this string is the two character country code as
described in ISO/IEC 3166-1. The third octet shall contain one
of the following:
1. an ASCII space character, if the regulations under which the
interface is operating include all environments in the specified
country.
2. an ASCII 'O' character, if the country's regulations are for
Outdoor environment only.
3. an ASCII 'I' character, if the country's regulations are for
Indoor environment only."
::= { wlanIfaceConfigEntry 2 }
wlanIfaceRegDomain OBJECT-TYPE
SYNTAX WlanRegDomainCode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the regulatory domain to use when calculating
the regulatory constraints for operation of the interface."
::= { wlanIfaceConfigEntry 3 }
wlanIfaceDesiredSsid OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The desired SSID for the interface as an ASCII string.
Specifying an empty string shall remove the current configured
SSID."
::= { wlanIfaceConfigEntry 4 }
wlanIfaceDesiredChannel OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The desired operating channel for this interface. The value of this
column is the channel index (wlanIfaceChannelId) of the corresponding
entry from the wlanIfaceChannelTable. The interface status must be
down so that the current operating channel may be set properly."
::= { wlanIfaceConfigEntry 5 }
wlanIfaceDynamicFreqSelection OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object specifies whether Dynamic Frequency
Selection (DFS) as specified in 802.11h is enabled on an
interface that supports 802.11h and DFS."
DEFVAL { false }
::= { wlanIfaceConfigEntry 6 }
wlanIfaceFastFrames OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object controls whether use of Atheros Fast
Frames is enabled when when communicating with another Fast
Frames-capable station. The value is only meaningful for
interfaces that support Atheros Fast Frames."
::= { wlanIfaceConfigEntry 7 }
wlanIfaceDturbo OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object controls whether use of Atheros Dynamic
Turbo mode is enabled when when communicating with another Dynamic
Turbo-capable station. The value is only meaningful for interfaces
that support Atheros Dynamic Turbo mode."
::= { wlanIfaceConfigEntry 8 }
wlanIfaceTxPower OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object controls the power used to transmit
frames. Accepted values are in units of one tenths of a dBm in
steps of .5 dBm, e.g setting the value of this object to 155
results in 15.5 dBm transmit power configured on the interface."
::= { wlanIfaceConfigEntry 9 }
wlanIfaceFragmentThreshold OBJECT-TYPE
SYNTAX INTEGER (256..2346)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object controls the threshold for which
transmitted frames are broken into fragments. Setting the value
of this object to 2346 will disable transmit fragmentation."
DEFVAL { 2346 }
::= { wlanIfaceConfigEntry 10 }
wlanIfaceRTSThreshold OBJECT-TYPE
SYNTAX INTEGER (1..2346)
UNITS "bytes"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object controls the threshold for which
transmitted frames are preceded by transmission of an RTS
control frame. Setting the value of this object to 2346 will
disable transmission of RTS frames."
DEFVAL { 2346 }
::= { wlanIfaceConfigEntry 11 }
wlanIfaceWlanPrivacySubscribe OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object specifies whether Wireless Privacy
Subscriber support is enabled on the interface."
::= { wlanIfaceConfigEntry 12 }
wlanIfaceBgScan OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object specifies whether background scanning
is enabled for an interface operating in station mode."
::= { wlanIfaceConfigEntry 13 }
wlanIfaceBgScanIdle OBJECT-TYPE
SYNTAX INTEGER
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object specifies the minimum time a station must
be idle before a background scan is initiated on an interface
operating in station mode."
DEFVAL { 250 }
::= { wlanIfaceConfigEntry 14 }
wlanIfaceBgScanInterval OBJECT-TYPE
SYNTAX INTEGER
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object specifies the interval at which background
scanning is attempted when operating in station mode."
DEFVAL { 300 }
::= { wlanIfaceConfigEntry 15 }
wlanIfaceBeaconMissedThreshold OBJECT-TYPE
SYNTAX INTEGER (1..255)
UNITS "frames"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object specifies the number of consecutive missed
beacons before an interface operating in station mode will attempt
to search for a new access point."
DEFVAL { 7 }
::= { wlanIfaceConfigEntry 16 }
wlanIfaceDesiredBssid OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object specifies the MAC address of the desired
access point to use when an interface is operating as a station."
::= { wlanIfaceConfigEntry 17 }
wlanIfaceRoamingMode OBJECT-TYPE
SYNTAX INTEGER {
device(1),
auto(2),
manual(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object specifies the desired system behavior
when the interface is operating as a station and the communication
with the current access point is broken."
DEFVAL { auto }
::= { wlanIfaceConfigEntry 18 }
wlanIfaceDot11d OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object specifies whether 802.11d specification
support is enabled."
DEFVAL { false }
::= { wlanIfaceConfigEntry 19 }
wlanIfaceDot11h OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object specifies whether 802.11h support
including spectrum management is enabled. The value is only
meaningfull for interfaces that support 802.11h specification."
DEFVAL { false }
::= { wlanIfaceConfigEntry 20 }
wlanIfaceDynamicWds OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object specifies whether Dynamic WDS (DWDS)
support is enabled. The value is only meaningful for interfaces
that support Dynamic WDS."
::= { wlanIfaceConfigEntry 21 }
wlanIfacePowerSave OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object specifies whether powersave operation
is enabled. The value is only meaningful for interfaces that
support powersave operation."
::= { wlanIfaceConfigEntry 22 }
wlanIfaceApBridge OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object specifies whether packets between
wireless clients will be passed directly by an interface
operating in host ap mode. Disabling it may be useful in
situations when traffic between wireless clients needs to be
processed with packet filtering."
DEFVAL { true }
::= { wlanIfaceConfigEntry 23 }
wlanIfaceBeaconInterval OBJECT-TYPE
SYNTAX INTEGER (25..1000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object specifies the interval at with beacon
frames are sent when an interface is operating in ad-hoc or ap
mode. The beacon interval is specified in TU's (1024 usecs)."
DEFVAL { 100 }
::= { wlanIfaceConfigEntry 24 }
wlanIfaceDtimPeriod OBJECT-TYPE
SYNTAX INTEGER (1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object specifies the DTIM period at which
buffered multicast data frames are transmitted by an interface
operating in host ap mode. Its value indicates the number of
beacon intervals between DTIM."
DEFVAL { 1 }
::= { wlanIfaceConfigEntry 25 }
wlanIfaceHideSsid OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object specifies whether broadcasting of the
SSID in beacon frames and responding to undirected probe request
frames is enabled for an interface operating in ap mode."
DEFVAL { false }
::= { wlanIfaceConfigEntry 26 }
wlanIfaceInactivityProccess OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object specifies whether inactivity processing
for associated station on an interface operating in ap mode is
enabled."
DEFVAL { true }
::= { wlanIfaceConfigEntry 27 }
wlanIfaceDot11gProtMode OBJECT-TYPE
SYNTAX INTEGER {
off(1),
cts(2),
rtscts(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object specifies the technique used for
protecting OFDM frames in a mixed 11b/11g network."
::= { wlanIfaceConfigEntry 28 }
wlanIfaceDot11gPureMode OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object specifies whether only 802.11g-capable
stations will be allowed to associate to an interface operating
as access point in 802.11g mode."
::= { wlanIfaceConfigEntry 29 }
wlanIfaceDot11nPureMode OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object specifies whether only HT-capable
stations will be allowed to associate to an interface operating
as access point in 802.11n mode."
::= { wlanIfaceConfigEntry 30 }
wlanIfaceDot11nAmpdu OBJECT-TYPE
SYNTAX WlanIfaceDot11nPduType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object specifies whether sending and
receiving of AMPDU frames is enabled on an interface
operating in 802.11n mode."
DEFVAL { txAndRx }
::= { wlanIfaceConfigEntry 31 }
wlanIfaceDot11nAmpduDensity OBJECT-TYPE
SYNTAX INTEGER (0|25|50|100|200|400|800|1600)
UNITS "1/100ths-of-microsecond"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object specifies the AMPDU density parameter
for an interface operating in 802.11n mode."
::= { wlanIfaceConfigEntry 32 }
wlanIfaceDot11nAmpduLimit OBJECT-TYPE
SYNTAX INTEGER (8192|16384|32768|65536)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object specifies a limit on the AMPDU packet
size for receiving AMPDU frames for an interface operating in
802.11n mode."
::= { wlanIfaceConfigEntry 33 }
wlanIfaceDot11nAmsdu OBJECT-TYPE
SYNTAX WlanIfaceDot11nPduType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object specifies whether sending and receiving
of AMSDU frames is enabled on an interface operating in 802.11n
mode."
DEFVAL { rxOnly }
::= { wlanIfaceConfigEntry 34 }
wlanIfaceDot11nAmsduLimit OBJECT-TYPE
SYNTAX INTEGER (3839|7935)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object specifies a limit on the AMSDU packet
size when sending and receiving AMSDU frames for an interface
operating in 802.11n mode."
::= { wlanIfaceConfigEntry 35 }
wlanIfaceDot11nHighThroughput OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object specifies whether use of High Throughput
(HT) is enabled for an interface operating in 802.11n mode."
DEFVAL { true }
::= { wlanIfaceConfigEntry 36 }
wlanIfaceDot11nHTCompatible OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object specifies whether use of compatibility
support for pre-802.11n devices is enabled for an interface
operating in 802.11n mode."
DEFVAL { true }
::= { wlanIfaceConfigEntry 37 }
wlanIfaceDot11nHTProtMode OBJECT-TYPE
SYNTAX INTEGER {
off(1),
rts(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object specifies the technique used for
protecting HT frames in a mixed legacy/HT network for interfaces
operating in 802.11n mode."
DEFVAL { rts }
::= { wlanIfaceConfigEntry 38 }
wlanIfaceDot11nRIFS OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object specifies whether Reduced InterFrame
Spacing (RIFS) is enabled for an interface operating in 802.11n
mode on an HT channel."
::= { wlanIfaceConfigEntry 39 }
wlanIfaceDot11nShortGI OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object specifies whether use of Short Guard
Interval is enabled on an interface operating in 802.11n mode
on an HT channel."
::= { wlanIfaceConfigEntry 40 }
wlanIfaceDot11nSMPSMode OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
static(2),
dynamic(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object specifies whether use of Spatial Multiplexing
Power Save (SMPS) is enabled on an interface operating in 802.11n mode
and whether SMPS mode is set to Static or Dynamic. The value is only
meaningfull for interfaces that support SMPS."
::= { wlanIfaceConfigEntry 41 }
wlanIfaceTdmaSlot OBJECT-TYPE
SYNTAX INTEGER (0..2)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object specifies the slot configuration to use
when operating in TDMA mode."
::= { wlanIfaceConfigEntry 42 }
wlanIfaceTdmaSlotCount OBJECT-TYPE
SYNTAX INTEGER (0..2)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object specifies the number of slots to use to
setup a BSS for an interface operating in TDMA mode."
::= { wlanIfaceConfigEntry 43 }
wlanIfaceTdmaSlotLength OBJECT-TYPE
SYNTAX INTEGER (150..65000)
UNITS "microseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object specifies a slot length that each station
has when a BSS is setup by an interface operating in TDMA mode."
DEFVAL { 10000 }
::= { wlanIfaceConfigEntry 44 }
wlanIfaceTdmaBeaconInterval OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object specifies the number of superframes at
which a beacon frame is sent to synchronize the TDMA slot timing
for interfaces operating in TDMA mode."
DEFVAL { 5 }
::= { wlanIfaceConfigEntry 45 }
wlanIfacePeerTable OBJECT-TYPE
SYNTAX SEQUENCE OF WlanIfacePeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains information about the associated stations
for an interface operating as an access point, or the stations
identified as neighbors in the IBSS for an interface operating in
adhoc mode."
::= { begemotWlanInterface 4 }
wlanIfacePeerEntry OBJECT-TYPE
SYNTAX WlanIfacePeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry that contains information for the associated stations
for an interface operating as an access point, or the neighboring
stations of an interface in adhoc mode."
INDEX { wlanIfaceName, wlanIfacePeerAddress }
::= { wlanIfacePeerTable 1 }
WlanIfacePeerEntry ::= SEQUENCE {
wlanIfacePeerAddress MacAddress,
wlanIfacePeerAssociationId INTEGER,
wlanIfacePeerVlanTag INTEGER,
wlanIfacePeerFrequency INTEGER,
wlanIfacePeerCurrentTXRate INTEGER,
wlanIfacePeerRxSignalStrength INTEGER,
wlanIfacePeerIdleTimer INTEGER,
wlanIfacePeerTxSequenceNo INTEGER,
wlanIfacePeerRxSequenceNo INTEGER,
wlanIfacePeerTxPower INTEGER,
wlanIfacePeerCapabilities BITS,
wlanIfacePeerFlags BITS
}
wlanIfacePeerAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address of this peer."
::= { wlanIfacePeerEntry 1 }
wlanIfacePeerAssociationId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ID of the associacition with this peer."
::= { wlanIfacePeerEntry 2 }
wlanIfacePeerVlanTag OBJECT-TYPE
SYNTAX INTEGER (0..4096)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Vlan Tag for traffic to/from this peer."
::= { wlanIfacePeerEntry 3 }
wlanIfacePeerFrequency OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operating frequency for the link with this peer."
::= { wlanIfacePeerEntry 4 }
wlanIfacePeerCurrentTXRate OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current transmit rate for this peer."
::= { wlanIfacePeerEntry 5 }
wlanIfacePeerRxSignalStrength OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average receive signal strength for this peer."
::= { wlanIfacePeerEntry 6 }
wlanIfacePeerIdleTimer OBJECT-TYPE
SYNTAX INTEGER
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this peer's inactivity timer."
::= { wlanIfacePeerEntry 7 }
wlanIfacePeerTxSequenceNo OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last sequence number transmitted to this peer."
::= { wlanIfacePeerEntry 8 }
wlanIfacePeerRxSequenceNo OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last sequence number received from this peer."
::= { wlanIfacePeerEntry 9 }
wlanIfacePeerTxPower OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The transmit power limit for this peer."
::= { wlanIfacePeerEntry 10 }
wlanIfacePeerCapabilities OBJECT-TYPE
SYNTAX WlanPeerCapabilityFlags
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The capabilities advertised by this peer."
::= { wlanIfacePeerEntry 11 }
wlanIfacePeerFlags OBJECT-TYPE
SYNTAX BITS {
authorizedForData(1),
qosEnabled(2),
erpEnabled(3),
powerSaveMode(4),
authRefHeld(5),
htEnabled(6),
htCompat(7),
wpsAssoc(8),
tsnAssoc(9),
ampduRx(10),
ampduTx(11),
mimoPowerSave(12),
sendRts(13),
rifs(14),
shortGiHT20(15),
shortGiHT40(16),
amsduRx(17),
amsduTx(18)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The peer state flags."
::= { wlanIfacePeerEntry 12 }
wlanIfaceChannelTable OBJECT-TYPE
SYNTAX SEQUENCE OF WlanIfaceChannelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains information about the active channels for
the cloned wireless interfaces in the system."
::= { begemotWlanInterface 5 }
wlanIfaceChannelEntry OBJECT-TYPE
SYNTAX WlanIfaceChannelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry that contains active channel information for the wireless
interface."
INDEX { wlanIfaceName, wlanIfaceChannelId }
::= { wlanIfaceChannelTable 1 }
WlanIfaceChannelEntry ::= SEQUENCE {
wlanIfaceChannelId INTEGER,
wlanIfaceChannelIeeeId INTEGER,
wlanIfaceChannelType INTEGER,
wlanIfaceChannelFlags BITS,
wlanIfaceChannelFrequency INTEGER,
wlanIfaceChannelMaxRegPower INTEGER,
wlanIfaceChannelMaxTxPower INTEGER,
wlanIfaceChannelMinTxPower INTEGER,
wlanIfaceChannelState BITS,
wlanIfaceChannelHTExtension INTEGER,
wlanIfaceChannelMaxAntennaGain INTEGER
}
wlanIfaceChannelId OBJECT-TYPE
SYNTAX INTEGER (1..1536)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of this channel entry."
::= { wlanIfaceChannelEntry 1 }
wlanIfaceChannelIeeeId OBJECT-TYPE
SYNTAX INTEGER (1..256)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The channel IEEE ID."
::= { wlanIfaceChannelEntry 2 }
wlanIfaceChannelType OBJECT-TYPE
SYNTAX INTEGER {
fhss(1),
dot11a(2),
dot11b(3),
dot11g(4),
tenMHz(5),
fiveMHz(6),
turbo(7),
ht(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operating channel type for this entry."
::= { wlanIfaceChannelEntry 3 }
wlanIfaceChannelFlags OBJECT-TYPE
SYNTAX BITS {
turbo(1),
cck(2),
ofdm(3),
spectrum2Ghz(4),
spectrum5Ghz(5),
passiveScan(6),
dynamicCckOfdm(7),
gfsk(8),
spectrum900Mhz(9),
dot11aStaticTurbo(10),
halfRate(11),
quarterRate(12),
ht20(13),
ht40u(14),
ht40d(15),
dfs(16),
xmit4ms(17),
noAdhoc(18),
noHostAp(19),
dot11d(20)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The channel flags."
::= { wlanIfaceChannelEntry 4 }
wlanIfaceChannelFrequency OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The channel frequency setting in MHz."
::= { wlanIfaceChannelEntry 5 }
wlanIfaceChannelMaxRegPower OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum regulatory tx power in dBm for this channel."
::= { wlanIfaceChannelEntry 6 }
wlanIfaceChannelMaxTxPower OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum tx power in units of .5 dBm for this channel."
::= { wlanIfaceChannelEntry 7 }
wlanIfaceChannelMinTxPower OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum tx power in units of .5 dBm for this channel."
::= { wlanIfaceChannelEntry 8 }
wlanIfaceChannelState OBJECT-TYPE
SYNTAX BITS {
radar(1),
cacDone(2),
interferenceDetected(3),
radarClear(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The channel dynamic state."
::= { wlanIfaceChannelEntry 9 }
wlanIfaceChannelHTExtension OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The HT40 extension channel number."
::= { wlanIfaceChannelEntry 10 }
wlanIfaceChannelMaxAntennaGain OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum antenna gain in units of .5 dBm."
::= { wlanIfaceChannelEntry 11 }
-- ---------------------------------------------------------- --
-- The Scan requests/results for cloned wireless interfaces
-- ---------------------------------------------------------- --
wlanScanConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF WlanScanConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains a configuration for channel scanning
initiated via SNMP."
::= { begemotWlanScanning 1 }
wlanScanConfigEntry OBJECT-TYPE
SYNTAX WlanScanConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Per cloned wireless interface channel scan configuration data.
The entry will be empty if no scans were initiated via SNMP."
INDEX { wlanIfaceName }
::= { wlanScanConfigTable 1 }
WlanScanConfigEntry ::= SEQUENCE {
wlanScanFlags BITS,
wlanScanDuration INTEGER,
wlanScanMinChannelDwellTime INTEGER,
wlanScanMaxChannelDwellTime INTEGER,
wlanScanConfigStatus INTEGER
}
wlanScanFlags OBJECT-TYPE
SYNTAX BITS {
noSelection(1),
activeScan(2),
pickFirst(3),
backgroundScan(4),
once(5),
noBroadcast(6),
noAutoSequencing(7),
flushCashe(8),
chechCashe(9)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Desired flags for the channel scan."
::= { wlanScanConfigEntry 1 }
wlanScanDuration OBJECT-TYPE
SYNTAX INTEGER (1..2147483647)
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The desired duration of the scan. Setting the value of this object
to the highest allowed value will initiate an infinite scan."
::= { wlanScanConfigEntry 2 }
wlanScanMinChannelDwellTime OBJECT-TYPE
SYNTAX INTEGER
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The minimum channel dwelltime for this scan."
::= { wlanScanConfigEntry 3 }
wlanScanMaxChannelDwellTime OBJECT-TYPE
SYNTAX INTEGER
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum channel dwelltime for this scan."
::= { wlanScanConfigEntry 4 }
wlanScanConfigStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
notStarted(1),
running(2),
finished(3),
cancel(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to initiate or cancel channel scanning on the cloned
interface via SNMP. Setting its value to running(2) will initiate channel
scanning on the cloned interface, while setting the value to cancel will
cancel the current ongoing scan. All other values should be returned in
GET operations only."
::= { wlanScanConfigEntry 5 }
wlanScanResultsTable OBJECT-TYPE
SYNTAX SEQUENCE OF WlanScanResultsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains scan results for a virtual wireless interface."
::= { begemotWlanScanning 2 }
wlanScanResultsEntry OBJECT-TYPE
SYNTAX WlanScanResultsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Per virtual wireless interface channel scan results data."
INDEX { wlanIfaceName, wlanScanResultID, wlanScanResultBssid }
::= { wlanScanResultsTable 1 }
WlanScanResultsEntry ::= SEQUENCE {
wlanScanResultID OCTET STRING,
wlanScanResultBssid MacAddress,
wlanScanResultChannel INTEGER,
wlanScanResultRate INTEGER,
wlanScanResultNoise INTEGER,
wlanScanResultBeaconInterval INTEGER,
wlanScanResultCapabilities BITS
}
wlanScanResultID OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The SSID/MESH ID for this scan result entry."
::= { wlanScanResultsEntry 1 }
wlanScanResultBssid OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The BSSID for this scan result entry."
::= { wlanScanResultsEntry 2 }
wlanScanResultChannel OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operating channel for this scan result entry."
::= { wlanScanResultsEntry 3 }
wlanScanResultRate OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operating rate of this scan result entry."
::= { wlanScanResultsEntry 4 }
wlanScanResultNoise OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The channel noise for this scan result entry."
::= { wlanScanResultsEntry 5 }
wlanScanResultBeaconInterval OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The beacon interval reported for this scan result entry."
::= { wlanScanResultsEntry 6 }
wlanScanResultCapabilities OBJECT-TYPE
SYNTAX WlanPeerCapabilityFlags
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The capabilities advertised for this scan result entry."
::= { wlanScanResultsEntry 7 }
wlanIfRoamParamsTable OBJECT-TYPE
SYNTAX SEQUENCE OF WlanIfRoamParamsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains the parameters that govern the roaming
operation on a wireless interface."
::= { begemotWlanInterface 6 }
wlanIfRoamParamsEntry OBJECT-TYPE
SYNTAX WlanIfRoamParamsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry that contains the roaming parameters of a wireless
interface."
INDEX { wlanIfaceName, wlanIfRoamPhyMode }
::= { wlanIfRoamParamsTable 1 }
WlanIfRoamParamsEntry ::= SEQUENCE {
wlanIfRoamPhyMode INTEGER,
wlanIfRoamRxSignalStrength INTEGER,
wlanIfRoamTxRateThreshold INTEGER
}
wlanIfRoamPhyMode OBJECT-TYPE
SYNTAX WlanIfPhyMode
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The PHY mode for this roaming parameters entry."
::= { wlanIfRoamParamsEntry 1 }
wlanIfRoamRxSignalStrength OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Receive Signal Strength for this roaming parameters entry."
::= { wlanIfRoamParamsEntry 2 }
wlanIfRoamTxRateThreshold OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The transmit rate threshold value for this roaming parameters
entry in Mb/s or MCS."
::= { wlanIfRoamParamsEntry 3 }
wlanIfTxParamsTable OBJECT-TYPE
SYNTAX SEQUENCE OF WlanIfTxParamsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains the parameters that govern the transmit
operation on a wireless interface."
::= { begemotWlanInterface 7 }
wlanIfTxParamsEntry OBJECT-TYPE
SYNTAX WlanIfTxParamsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry that contains the transmit parameters of a wireless
interface."
INDEX { wlanIfaceName, wlanIfTxPhyMode }
::= { wlanIfTxParamsTable 1 }
WlanIfTxParamsEntry ::= SEQUENCE {
wlanIfTxPhyMode INTEGER,
wlanIfTxUnicastRate INTEGER,
wlanIfTxMcastRate INTEGER,
wlanIfTxMgmtRate INTEGER,
wlanIfTxMaxRetryCount INTEGER
}
wlanIfTxPhyMode OBJECT-TYPE
SYNTAX WlanIfPhyMode
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The PHY mode for this entry."
::= { wlanIfTxParamsEntry 1 }
wlanIfTxUnicastRate OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object specifies a fixed rate for transmitting
unicast frames in this phy mode."
::= { wlanIfTxParamsEntry 2 }
wlanIfTxMcastRate OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object specifies a fixed rate for transmitting
broadcast and multicast frames in this phy mode."
::= { wlanIfTxParamsEntry 3 }
wlanIfTxMgmtRate OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object specifies a fixed rate for transmitting
management and/or control frames in this phy mode."
::= { wlanIfTxParamsEntry 4 }
wlanIfTxMaxRetryCount OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum number of tries to use when sending unicast frames
in this phy mode."
::= { wlanIfTxParamsEntry 5 }
-- ---------------------------------------------------------- --
-- The Statistics Database for Wireless interfaces
-- ---------------------------------------------------------- --
wlanIfaceStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF WlanIfaceStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains summary statistics for each virtual wireless
interface on the managed device."
::= { begemotWlanStatistics 1 }
wlanIfaceStatisticsEntry OBJECT-TYPE
SYNTAX WlanIfaceStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of statistics for each virtual wireless interface."
AUGMENTS { wlanInterfaceEntry }
::= { wlanIfaceStatisticsTable 1 }
WlanIfaceStatisticsEntry ::= SEQUENCE {
wlanStatsRxBadVersion Counter32,
wlanStatsRxTooShort Counter32,
wlanStatsRxWrongBssid Counter32,
wlanStatsRxDiscardedDups Counter32,
wlanStatsRxWrongDir Counter32,
wlanStatsRxDiscardMcastEcho Counter32,
wlanStatsRxDiscardNoAssoc Counter32,
wlanStatsRxWepNoPrivacy Counter32,
wlanStatsRxWepUnencrypted Counter32,
wlanStatsRxWepFailed Counter32,
wlanStatsRxDecapsulationFailed Counter32,
wlanStatsRxDiscardMgmt Counter32,
wlanStatsRxControl Counter32,
wlanStatsRxBeacon Counter32,
wlanStatsRxRateSetTooBig Counter32,
wlanStatsRxElemMissing Counter32,
wlanStatsRxElemTooBig Counter32,
wlanStatsRxElemTooSmall Counter32,
wlanStatsRxElemUnknown Counter32,
wlanStatsRxChannelMismatch Counter32,
wlanStatsRxDropped Counter32,
wlanStatsRxSsidMismatch Counter32,
wlanStatsRxAuthNotSupported Counter32,
wlanStatsRxAuthFailed Counter32,
wlanStatsRxAuthCM Counter32,
wlanStatsRxAssocWrongBssid Counter32,
wlanStatsRxAssocNoAuth Counter32,
wlanStatsRxAssocCapMismatch Counter32,
wlanStatsRxAssocNoRateMatch Counter32,
wlanStatsRxBadWpaIE Counter32,
wlanStatsRxDeauthenticate Counter32,
wlanStatsRxDisassociate Counter32,
wlanStatsRxUnknownSubtype Counter32,
wlanStatsRxFailedNoBuf Counter32,
wlanStatsRxBadAuthRequest Counter32,
wlanStatsRxUnAuthorized Counter32,
wlanStatsRxBadKeyId Counter32,
wlanStatsRxCCMPSeqViolation Counter32,
wlanStatsRxCCMPBadFormat Counter32,
wlanStatsRxCCMPFailedMIC Counter32,
wlanStatsRxTKIPSeqViolation Counter32,
wlanStatsRxTKIPBadFormat Counter32,
wlanStatsRxTKIPFailedMIC Counter32,
wlanStatsRxTKIPFailedICV Counter32,
wlanStatsRxDiscardACL Counter32,
wlanStatsTxFailedNoBuf Counter32,
wlanStatsTxFailedNoNode Counter32,
wlanStatsTxUnknownMgmt Counter32,
wlanStatsTxBadCipher Counter32,
wlanStatsTxNoDefKey Counter32,
wlanStatsTxFragmented Counter32,
wlanStatsTxFragmentsCreated Counter32,
wlanStatsActiveScans Counter32,
wlanStatsPassiveScans Counter32,
wlanStatsTimeoutInactivity Counter32,
wlanStatsCryptoNoMem Counter32,
wlanStatsSwCryptoTKIP Counter32,
wlanStatsSwCryptoTKIPEnMIC Counter32,
wlanStatsSwCryptoTKIPDeMIC Counter32,
wlanStatsCryptoTKIPCM Counter32,
wlanStatsSwCryptoCCMP Counter32,
wlanStatsSwCryptoWEP Counter32,
wlanStatsCryptoCipherKeyRejected Counter32,
wlanStatsCryptoNoKey Counter32,
wlanStatsCryptoDeleteKeyFailed Counter32,
wlanStatsCryptoUnknownCipher Counter32,
wlanStatsCryptoAttachFailed Counter32,
wlanStatsCryptoKeyFailed Counter32,
wlanStatsCryptoEnMICFailed Counter32,
wlanStatsIBSSCapMismatch Counter32,
wlanStatsUnassocStaPSPoll Counter32,
wlanStatsBadAidPSPoll Counter32,
wlanStatsEmptyPSPoll Counter32,
wlanStatsRxFFBadHdr Counter32,
wlanStatsRxFFTooShort Counter32,
wlanStatsRxFFSplitError Counter32,
wlanStatsRxFFDecap Counter32,
wlanStatsTxFFEncap Counter32,
wlanStatsRxBadBintval Counter32,
wlanStatsRxDemicFailed Counter32,
wlanStatsRxDefragFailed Counter32,
wlanStatsRxMgmt Counter32,
wlanStatsRxActionMgmt Counter32,
wlanStatsRxAMSDUTooShort Counter32,
wlanStatsRxAMSDUSplitError Counter32,
wlanStatsRxAMSDUDecap Counter32,
wlanStatsTxAMSDUEncap Counter32,
wlanStatsAMPDUBadBAR Counter32,
wlanStatsAMPDUOowBar Counter32,
wlanStatsAMPDUMovedBAR Counter32,
wlanStatsAMPDURxBAR Counter32,
wlanStatsAMPDURxOor Counter32,
wlanStatsAMPDURxCopied Counter32,
wlanStatsAMPDURxDropped Counter32,
wlanStatsTxDiscardBadState Counter32,
wlanStatsTxFailedNoAssoc Counter32,
wlanStatsTxClassifyFailed Counter32,
wlanStatsDwdsMcastDiscard Counter32,
wlanStatsHTAssocRejectNoHT Counter32,
wlanStatsHTAssocDowngrade Counter32,
wlanStatsHTAssocRateMismatch Counter32,
wlanStatsAMPDURxAge Counter32,
wlanStatsAMPDUMoved Counter32,
wlanStatsADDBADisabledReject Counter32,
wlanStatsADDBANoRequest Counter32,
wlanStatsADDBABadToken Counter32,
wlanStatsADDBABadPolicy Counter32,
wlanStatsAMPDUStopped Counter32,
wlanStatsAMPDUStopFailed Counter32,
wlanStatsAMPDURxReorder Counter32,
wlanStatsScansBackground Counter32,
wlanLastDeauthReason INTEGER,
wlanLastDissasocReason INTEGER,
wlanLastAuthFailReason INTEGER,
wlanStatsBeaconMissedEvents Counter32,
wlanStatsRxDiscardBadStates Counter32,
wlanStatsFFFlushed Counter32,
wlanStatsTxControlFrames Counter32,
wlanStatsAMPDURexmt Counter32,
wlanStatsAMPDURexmtFailed Counter32,
wlanStatsReset INTEGER
}
wlanStatsRxBadVersion OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames received by this interface that had bad version."
::= { wlanIfaceStatisticsEntry 1 }
wlanStatsRxTooShort OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames received by this interface that were too short."
::= { wlanIfaceStatisticsEntry 2 }
wlanStatsRxWrongBssid OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames received by this interface with wrong BSSID."
::= { wlanIfaceStatisticsEntry 3 }
wlanStatsRxDiscardedDups OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received discarded duplicate frames by this interface."
::= { wlanIfaceStatisticsEntry 4 }
wlanStatsRxWrongDir OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received frames by this interface that were dropped
due to wrong direction."
::= { wlanIfaceStatisticsEntry 5 }
wlanStatsRxDiscardMcastEcho OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received multicast echo frames discarded by this
interface."
::= { wlanIfaceStatisticsEntry 6 }
wlanStatsRxDiscardNoAssoc OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames received by this interface that were dropped
since no association existed with the sending station."
::= { wlanIfaceStatisticsEntry 7 }
wlanStatsRxWepNoPrivacy OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames received by this interface that were dropped
since they contained WEP information and WEP privacy was off."
::= { wlanIfaceStatisticsEntry 8 }
wlanStatsRxWepUnencrypted OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames received by this interface that were dropped
since they contained no WEP information and WEP privacy was on."
::= { wlanIfaceStatisticsEntry 9 }
wlanStatsRxWepFailed OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames received by this interface that were dropped
since processing of the WEP information contained in them failed."
::= { wlanIfaceStatisticsEntry 10 }
wlanStatsRxDecapsulationFailed OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received frames that were discarded by this interface
due to decapsulation failure."
::= { wlanIfaceStatisticsEntry 11 }
wlanStatsRxDiscardMgmt OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received management frames discarded by this interface."
::= { wlanIfaceStatisticsEntry 12 }
wlanStatsRxControl OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of control frames received by this interface."
::= { wlanIfaceStatisticsEntry 13 }
wlanStatsRxBeacon OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of beacon frames received by this interface."
::= { wlanIfaceStatisticsEntry 14 }
wlanStatsRxRateSetTooBig OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames received by this interface with extended
supported rate element."
::= { wlanIfaceStatisticsEntry 15 }
wlanStatsRxElemMissing OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames received by this interface that were missing
a required element."
::= { wlanIfaceStatisticsEntry 16 }
wlanStatsRxElemTooBig OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames received by this interface that contained an
information element whose size was too big."
::= { wlanIfaceStatisticsEntry 17 }
wlanStatsRxElemTooSmall OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames received by this interface that contained an
information element whose size was too small."
::= { wlanIfaceStatisticsEntry 18 }
wlanStatsRxElemUnknown OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames received by this interface that contained an
unknown information element."
::= { wlanIfaceStatisticsEntry 19 }
wlanStatsRxChannelMismatch OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames received by this interface, that were discarded
since they were received on a channel different from the one indicated
in the DS params element id."
::= { wlanIfaceStatisticsEntry 20 }
wlanStatsRxDropped OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames received by this interface that were dropped due
to unknown reason."
::= { wlanIfaceStatisticsEntry 21 }
wlanStatsRxSsidMismatch OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames received by this interface that had a bad SSID."
::= { wlanIfaceStatisticsEntry 22 }
wlanStatsRxAuthNotSupported OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames received by this interface that contained an
unknown authentication algorithm."
::= { wlanIfaceStatisticsEntry 23 }
wlanStatsRxAuthFailed OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames received by this interface for which the
authentication failed."
::= { wlanIfaceStatisticsEntry 24 }
wlanStatsRxAuthCM OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames received by this interface for which the
authentication failed due to TKIP countermeasures enabled."
::= { wlanIfaceStatisticsEntry 25 }
wlanStatsRxAssocWrongBssid OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames received by this interface with association
request that had a bad BSSID."
::= { wlanIfaceStatisticsEntry 26 }
wlanStatsRxAssocNoAuth OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames received by this interface with association
request that came from unauthentication node."
::= { wlanIfaceStatisticsEntry 27 }
wlanStatsRxAssocCapMismatch OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames received by this interface with association
request that had bad capabilities set."
::= { wlanIfaceStatisticsEntry 28 }
wlanStatsRxAssocNoRateMatch OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames received by this interface with association
request that had unsupported rate set."
::= { wlanIfaceStatisticsEntry 29 }
wlanStatsRxBadWpaIE OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames received by this interface with association
request that had no or invalid WPA information element."
::= { wlanIfaceStatisticsEntry 30 }
wlanStatsRxDeauthenticate OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of deauthentication requests received by this interface."
::= { wlanIfaceStatisticsEntry 31 }
wlanStatsRxDisassociate OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of deassociation requests received by this interface."
::= { wlanIfaceStatisticsEntry 32 }
wlanStatsRxUnknownSubtype OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames received by this interface that had unknown
subtype."
::= { wlanIfaceStatisticsEntry 33 }
wlanStatsRxFailedNoBuf OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames received by this interface that were dropped
due to lack of free buffers."
::= { wlanIfaceStatisticsEntry 34 }
wlanStatsRxBadAuthRequest OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames received by this interface for which
authentication failed."
::= { wlanIfaceStatisticsEntry 35 }
wlanStatsRxUnAuthorized OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of non-PAE frames received by this interface prior to
authorization."
::= { wlanIfaceStatisticsEntry 36 }
wlanStatsRxBadKeyId OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames received by this interface with bad key."
::= { wlanIfaceStatisticsEntry 37 }
wlanStatsRxCCMPSeqViolation OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames received by this interface that caused CCMP
sequence violation."
::= { wlanIfaceStatisticsEntry 38 }
wlanStatsRxCCMPBadFormat OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames received by this interface that had bad CCMP
format."
::= { wlanIfaceStatisticsEntry 39 }
wlanStatsRxCCMPFailedMIC OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames receivbed by this interface for which CCMP
decryption failed due to MIC mismatch."
::= { wlanIfaceStatisticsEntry 40 }
wlanStatsRxTKIPSeqViolation OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames received by this interface that caused TKIP
sequence violation.."
::= { wlanIfaceStatisticsEntry 41 }
wlanStatsRxTKIPBadFormat OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames received by this interface that were missing
TKIP ExtIV."
::= { wlanIfaceStatisticsEntry 42 }
wlanStatsRxTKIPFailedMIC OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames received by this interface for which TKIP
decryption failed due to MIC mismatch."
::= { wlanIfaceStatisticsEntry 43 }
wlanStatsRxTKIPFailedICV OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames received by this interface for which TKIP
decryption failed due to ICV mismatch."
::= { wlanIfaceStatisticsEntry 44 }
wlanStatsRxDiscardACL OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames received by this interface that were
disallowed by ACL."
::= { wlanIfaceStatisticsEntry 45 }
wlanStatsTxFailedNoBuf OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames that were not transmitted by this interface
due to lack of free buffers."
::= { wlanIfaceStatisticsEntry 46 }
wlanStatsTxFailedNoNode OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames that were queued for transmit on this interface
but were not sent since appropriate node for sending was not found."
::= { wlanIfaceStatisticsEntry 47 }
wlanStatsTxUnknownMgmt OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of unknown management frames transmitted by this interface."
::= { wlanIfaceStatisticsEntry 48 }
wlanStatsTxBadCipher OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames that were queued for transmit on this interface
but were not send since the specified key was not setup."
::= { wlanIfaceStatisticsEntry 49 }
wlanStatsTxNoDefKey OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames that were queued for transmit on this interface
but were not send since an appropriate key was not found."
::= { wlanIfaceStatisticsEntry 50 }
wlanStatsTxFragmented OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of fragmented frames transmitted by this interface."
::= { wlanIfaceStatisticsEntry 51 }
wlanStatsTxFragmentsCreated OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of created fragments transmitted by this interface."
::= { wlanIfaceStatisticsEntry 52 }
wlanStatsActiveScans OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of active scans performed by this interface."
::= { wlanIfaceStatisticsEntry 53 }
wlanStatsPassiveScans OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of passive scans performed by this interface."
::= { wlanIfaceStatisticsEntry 54 }
wlanStatsTimeoutInactivity OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times a station/node was dropped by this interface
due to inactivity timeout."
::= { wlanIfaceStatisticsEntry 55 }
wlanStatsCryptoNoMem OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number times attaching a crypto protocol to this interface
failed due to lack of memory."
::= { wlanIfaceStatisticsEntry 56 }
wlanStatsSwCryptoTKIP OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times TKIP encryption/decryption was handled in
software for frames received/transmitted by this interface."
::= { wlanIfaceStatisticsEntry 57 }
wlanStatsSwCryptoTKIPEnMIC OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times TKIP MIC was added in software to frames
transmitted by this interface."
::= { wlanIfaceStatisticsEntry 58 }
wlanStatsSwCryptoTKIPDeMIC OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times TKIP MIC was stripped in software from frames
received by this interface."
::= { wlanIfaceStatisticsEntry 59 }
wlanStatsCryptoTKIPCM OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames discarded by this interface due to TKIP
counter measures."
::= { wlanIfaceStatisticsEntry 60 }
wlanStatsSwCryptoCCMP OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times CCMP encryption/decryption was handled in
software for frames received/transmitted by this interface."
::= { wlanIfaceStatisticsEntry 61 }
wlanStatsSwCryptoWEP OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times WEP encryption/decryption was handled in
software for frames received/transmitted by this interface."
::= { wlanIfaceStatisticsEntry 62 }
wlanStatsCryptoCipherKeyRejected OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times a key was rejected for this interface."
::= { wlanIfaceStatisticsEntry 63 }
wlanStatsCryptoNoKey OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times key setup for this interface failed."
::= { wlanIfaceStatisticsEntry 64 }
wlanStatsCryptoDeleteKeyFailed OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times key deletion from driver for this interface
failed."
::= { wlanIfaceStatisticsEntry 65 }
wlanStatsCryptoUnknownCipher OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times key setup for this interface failed due to
invalid cipher."
::= { wlanIfaceStatisticsEntry 66 }
wlanStatsCryptoAttachFailed OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times attaching a cipher for this interface failed."
::= { wlanIfaceStatisticsEntry 67 }
wlanStatsCryptoKeyFailed OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times setting a cipher in the driver for this
interface failed."
::= { wlanIfaceStatisticsEntry 68 }
wlanStatsCryptoEnMICFailed OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames that were discarded by by this interface
due to failed enmic."
::= { wlanIfaceStatisticsEntry 69 }
wlanStatsIBSSCapMismatch OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times a BSSID change failed for an interface operating
in ad hoc mode due to capabilities mismatch."
::= { wlanIfaceStatisticsEntry 70 }
wlanStatsUnassocStaPSPoll OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ps-poll frames from unassociated station received
by this interface."
::= { wlanIfaceStatisticsEntry 71 }
wlanStatsBadAidPSPoll OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ps-poll frames with incorrect aid received by this
interface."
::= { wlanIfaceStatisticsEntry 72 }
wlanStatsEmptyPSPoll OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of empty ps-poll frames received by this interface."
::= { wlanIfaceStatisticsEntry 73 }
wlanStatsRxFFBadHdr OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of fast frames with bad header received by this interface."
::= { wlanIfaceStatisticsEntry 74 }
wlanStatsRxFFTooShort OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of fast frames received by this interface, for which
decapsulation failed."
::= { wlanIfaceStatisticsEntry 75 }
wlanStatsRxFFSplitError OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of fast frames received by this interface, for which
decapsulation failed during split."
::= { wlanIfaceStatisticsEntry 76 }
wlanStatsRxFFDecap OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of fast frames received by this interface, that were
successfully decapsulated."
::= { wlanIfaceStatisticsEntry 77 }
wlanStatsTxFFEncap OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of encapsulated fast frames transmitted by this interface."
::= { wlanIfaceStatisticsEntry 78 }
wlanStatsRxBadBintval OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames with bogus beacon interval received by this
interface."
::= { wlanIfaceStatisticsEntry 79 }
wlanStatsRxDemicFailed OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames received by this interface for which
stripping of the MIC failed."
::= { wlanIfaceStatisticsEntry 80 }
wlanStatsRxDefragFailed OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames received by this interface for which
defragmentation failed."
::= { wlanIfaceStatisticsEntry 81 }
wlanStatsRxMgmt OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of management frames received by this interface."
::= { wlanIfaceStatisticsEntry 82 }
wlanStatsRxActionMgmt OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of action management frames received by this interface."
::= { wlanIfaceStatisticsEntry 83 }
wlanStatsRxAMSDUTooShort OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of A-MSDU frames received by this interface for which
decapsulaiton failed."
::= { wlanIfaceStatisticsEntry 84 }
wlanStatsRxAMSDUSplitError OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of A-MSDU frames received by this interface for which
split failed."
::= { wlanIfaceStatisticsEntry 85 }
wlanStatsRxAMSDUDecap OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of A-MSDU frames received by this interface which
were successfully decapsulaited."
::= { wlanIfaceStatisticsEntry 86 }
wlanStatsTxAMSDUEncap OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of encapsulated A-MSDU frames transmitted by this
interface."
::= { wlanIfaceStatisticsEntry 87 }
wlanStatsAMPDUBadBAR OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of A-MPDU frames that were dropped by this interface
source BAR frame processing was disabled."
::= { wlanIfaceStatisticsEntry 88 }
wlanStatsAMPDUOowBar OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of A-MPDU BAR before ADDBA frames received by this
interface."
::= { wlanIfaceStatisticsEntry 89 }
wlanStatsAMPDUMovedBAR OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times a BAR moved window occurred."
::= { wlanIfaceStatisticsEntry 90 }
wlanStatsAMPDURxBAR OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of A-MPDU BAR frames received by this interface."
::= { wlanIfaceStatisticsEntry 91 }
wlanStatsAMPDURxOor OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of out-of-order A-MPDU frames by received this interface."
::= { wlanIfaceStatisticsEntry 92 }
wlanStatsAMPDURxCopied OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of A-MPDU frames by copied down this interface."
::= { wlanIfaceStatisticsEntry 93 }
wlanStatsAMPDURxDropped OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of A-MPDU frames by dropped this interface."
::= { wlanIfaceStatisticsEntry 94 }
wlanStatsTxDiscardBadState OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames queued for transmit on this interface that
were discarded due to interface state not ready for transmit."
::= { wlanIfaceStatisticsEntry 95 }
wlanStatsTxFailedNoAssoc OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames queued for transmit on this interface that
were discarded since the receiving station was not associated."
::= { wlanIfaceStatisticsEntry 96 }
wlanStatsTxClassifyFailed OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames queued for transmit on this interface that
were discarded since their priority was not determined."
::= { wlanIfaceStatisticsEntry 97 }
wlanStatsDwdsMcastDiscard OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of multicast over DWDS frames discarded by this interface."
::= { wlanIfaceStatisticsEntry 98 }
wlanStatsHTAssocRejectNoHT OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of management frames received from a non-HT stations
that were rejected by this interface."
::= { wlanIfaceStatisticsEntry 99 }
wlanStatsHTAssocDowngrade OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times HT was disallowed for an association on
this interface due to WEP or TKIP requested."
::= { wlanIfaceStatisticsEntry 100 }
wlanStatsHTAssocRateMismatch OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times rate mismatch occurred during HT rate set
handling on this interface."
::= { wlanIfaceStatisticsEntry 101 }
wlanStatsAMPDURxAge OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of A-MPDU frames sent by this interface due to aging out."
::= { wlanIfaceStatisticsEntry 102 }
wlanStatsAMPDUMoved OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of time A-MPDU MSDU moved window occurred for this
interface."
::= { wlanIfaceStatisticsEntry 103 }
wlanStatsADDBADisabledReject OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received ADDBA frames that were discarded by this
interface since ADDBA was disabled."
::= { wlanIfaceStatisticsEntry 104 }
wlanStatsADDBANoRequest OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received ADDBA responses frames that were discarded
by this interface due to no pending ADDBA."
::= { wlanIfaceStatisticsEntry 105 }
wlanStatsADDBABadToken OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received ADDBA response frames that were discarded
by this interface since ADDBA response caused dialogtoken mismatch."
::= { wlanIfaceStatisticsEntry 106 }
wlanStatsADDBABadPolicy OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received ADDBA response frames that were discarded
by this interface since ADDBA response caused policy mismatch."
::= { wlanIfaceStatisticsEntry 107 }
wlanStatsAMPDUStopped OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times a A-MPDU stream stopped on this interface."
::= { wlanIfaceStatisticsEntry 108 }
wlanStatsAMPDUStopFailed OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times a A-MPDU stream stop failed on this interface."
::= { wlanIfaceStatisticsEntry 109 }
wlanStatsAMPDURxReorder OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received reordered A-MPDU frames on this interface."
::= { wlanIfaceStatisticsEntry 110 }
wlanStatsScansBackground OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of background scans started on this interface."
::= { wlanIfaceStatisticsEntry 111 }
wlanLastDeauthReason OBJECT-TYPE
SYNTAX WlanMgmtReasonCode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last received deauthenticate reason on this interface."
::= { wlanIfaceStatisticsEntry 112 }
wlanLastDissasocReason OBJECT-TYPE
SYNTAX WlanMgmtReasonCode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last received disassociate reason on this interface."
::= { wlanIfaceStatisticsEntry 113 }
wlanLastAuthFailReason OBJECT-TYPE
SYNTAX WlanMgmtReasonCode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last received authentication failed reason on this interface."
::= { wlanIfaceStatisticsEntry 114 }
wlanStatsBeaconMissedEvents OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of beacon miss notification events on this interface."
::= { wlanIfaceStatisticsEntry 115 }
wlanStatsRxDiscardBadStates OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames received on this interface that were discarded
due to interface state not ready for receive."
::= { wlanIfaceStatisticsEntry 116 }
wlanStatsFFFlushed OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of fast frames flushed from the stage queue on this
interface."
::= { wlanIfaceStatisticsEntry 117 }
wlanStatsTxControlFrames OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of control frames transmitted by this interface."
::= { wlanIfaceStatisticsEntry 118 }
wlanStatsAMPDURexmt OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of A-MPDU frames successfully retransmitted by this
interface."
::= { wlanIfaceStatisticsEntry 119 }
wlanStatsAMPDURexmtFailed OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of A-MPDU frames for which retransmission failed on
this interface."
::= { wlanIfaceStatisticsEntry 120 }
wlanStatsReset OBJECT-TYPE
SYNTAX INTEGER {
no-op(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object is used to reset the statistics on this
interface."
::= { wlanIfaceStatisticsEntry 121 }
-- ---------------------------------------------------------- --
-- The WEP Configuration Database for Wireless interfaces
-- ---------------------------------------------------------- --
wlanWepInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF WlanWepInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains WEP configuration for the wireless interfaces
on the managed system."
::= { begemotWlanWep 1 }
wlanWepInterfaceEntry OBJECT-TYPE
SYNTAX WlanWepInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"WEP Configuration for wireless interface."
INDEX { wlanIfaceName}
::= { wlanWepInterfaceTable 1 }
WlanWepInterfaceEntry ::= SEQUENCE {
wlanWepMode INTEGER,
wlanWepDefTxKey INTEGER
}
wlanWepMode OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1),
mixed(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The WEP mode set on the interface."
DEFVAL { off }
::= { wlanWepInterfaceEntry 1 }
wlanWepDefTxKey OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The index of the default WEP key for the interface."
::= { wlanWepInterfaceEntry 2 }
wlanWepKeyTable OBJECT-TYPE
SYNTAX SEQUENCE OF WlanWepKeyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains the configured WEP keys for a virtual
wireless interface."
::= { begemotWlanWep 2 }
wlanWepKeyEntry OBJECT-TYPE
SYNTAX WlanWepKeyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A configured WEP Key entry."
INDEX { wlanIfaceName, wlanWepKeyID }
::= { wlanWepKeyTable 1 }
WlanWepKeyEntry ::= SEQUENCE {
wlanWepKeyID INTEGER,
wlanWepKeyLength INTEGER,
wlanWepKeySet OCTET STRING,
wlanWepKeyHash OCTET STRING,
wlanWepKeyStatus RowStatus
}
wlanWepKeyID OBJECT-TYPE
SYNTAX INTEGER (1..4)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The WEP Key ID."
::= { wlanWepKeyEntry 1 }
wlanWepKeyLength OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The WEP Key length."
::= { wlanWepKeyEntry 2 }
wlanWepKeySet OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The WEP Key String to configure for this key. When GET is attempted
for this column, an empty Octet String is returned."
::= { wlanWepKeyEntry 3 }
wlanWepKeyHash OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The SHA256 hash produced of the WEP Key String."
::= { wlanWepKeyEntry 4 }
wlanWepKeyStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used for creating/deleting WEP keys."
::= { wlanWepKeyEntry 5 }
-- ---------------------------------------------------------- --
-- The MAC Access Control Database for Wireless interfaces
-- ---------------------------------------------------------- --
wlanMACAccessControlTable OBJECT-TYPE
SYNTAX SEQUENCE OF WlanMACAccessControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains Access Control configuration for wireless
interfaces operating as an access point."
::= { begemotWlanMACAccessControl 1 }
wlanMACAccessControlEntry OBJECT-TYPE
SYNTAX WlanMACAccessControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The MAC Access Control configuration for a wireless interface
operating as an access point."
INDEX { wlanIfaceName}
::= { wlanMACAccessControlTable 1 }
WlanMACAccessControlEntry ::= SEQUENCE {
wlanMACAccessControlPolicy INTEGER,
wlanMACAccessControlNacl Counter32,
wlanMACAccessControlFlush INTEGER
}
wlanMACAccessControlPolicy OBJECT-TYPE
SYNTAX INTEGER {
open(0),
allow(1),
deny(2),
radius(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object specifies the MAC Access Control policy
for this Host AP interface."
DEFVAL { open }
::= { wlanMACAccessControlEntry 1 }
wlanMACAccessControlNacl OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of active MAC Access Control Entries in the Database
for this Host AP interface."
::= { wlanMACAccessControlEntry 2 }
wlanMACAccessControlFlush OBJECT-TYPE
SYNTAX INTEGER {
no-op(0),
flush(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to flush all entries from the MAC Access
Control Database for the specified virtual wireless interface."
::= { wlanMACAccessControlEntry 3 }
wlanMACAccessControlMACTable OBJECT-TYPE
SYNTAX SEQUENCE OF WlanMACAccessControlMACEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains Access Control MAC for virtual wireless
interfaces operating in Host AP mode."
::= { begemotWlanMACAccessControl 2 }
wlanMACAccessControlMACEntry OBJECT-TYPE
SYNTAX WlanMACAccessControlMACEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The MAC Access Control configuration database with MAC addresses
for a virtual wireless interface."
INDEX { wlanIfaceName, wlanMACAccessControlMAC }
::= { wlanMACAccessControlMACTable 1 }
WlanMACAccessControlMACEntry ::= SEQUENCE {
wlanMACAccessControlMAC MacAddress,
wlanMACAccessControlMACStatus RowStatus
}
wlanMACAccessControlMAC OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object specifies the station's MAC to which
the Access Control policy will be applied."
::= { wlanMACAccessControlMACEntry 1 }
wlanMACAccessControlMACStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object is used to add or delete MAC entries from the Access
Control Database for this interface operating in Host AP mode.
To add an entry the value of this object should be set to createAndGo,
a value of destroy will remove an existing entry. A GET on this object
will always return value active."
::= { wlanMACAccessControlMACEntry 2 }
-- ---------------------------------------------------------- --
-- The Mesh Routing Database for interfaces operating in mesh mode
-- ---------------------------------------------------------- --
wlanMeshRoutingConfig OBJECT IDENTIFIER ::= { begemotWlanMeshRouting 1 }
wlanMeshInterface OBJECT IDENTIFIER ::= { begemotWlanMeshRouting 2 }
wlanMeshRoute OBJECT IDENTIFIER ::= { begemotWlanMeshRouting 3 }
wlanMeshStatistics OBJECT IDENTIFIER ::= { begemotWlanMeshRouting 4 }
wlanMeshRouteProtocols OBJECT IDENTIFIER ::= { begemotWlanMeshRouting 5 }
wlanMeshMaxRetries OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Maximum retries during peer link establishment for wireless mesh
routing operation."
DEFVAL { 2 }
::= { wlanMeshRoutingConfig 1 }
wlanMeshConfirmTimeout OBJECT-TYPE
SYNTAX INTEGER
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Confirm state timeout for wireless mesh routing operation."
DEFVAL { 40 }
::= { wlanMeshRoutingConfig 2 }
wlanMeshHoldingTimeout OBJECT-TYPE
SYNTAX INTEGER
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Holding state timeout for wireless mesh routing operation."
DEFVAL { 40 }
::= { wlanMeshRoutingConfig 3 }
wlanMeshRetryTimeout OBJECT-TYPE
SYNTAX INTEGER
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Retry timeout for wireless mesh routing operation."
DEFVAL { 40 }
::= { wlanMeshRoutingConfig 4 }
wlanMeshInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF WlanMeshInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains information for wireless interfaces operating
as wireless mesh points."
::= { wlanMeshInterface 1 }
wlanMeshInterfaceEntry OBJECT-TYPE
SYNTAX WlanMeshInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Wireless Mesh Routing information for an interface operating as
mesh point."
INDEX { wlanIfaceName }
::= { wlanMeshInterfaceTable 1 }
WlanMeshInterfaceEntry ::= SEQUENCE {
wlanMeshId OCTET STRING,
wlanMeshTTL INTEGER,
wlanMeshPeeringEnabled TruthValue,
wlanMeshForwardingEnabled TruthValue,
wlanMeshMetric INTEGER,
wlanMeshPath INTEGER,
wlanMeshRoutesFlush INTEGER
}
wlanMeshId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The desired Mesh Identifier for the interface."
::= { wlanMeshInterfaceEntry 1 }
wlanMeshTTL OBJECT-TYPE
SYNTAX INTEGER
UNITS "hops"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of hops a packet may be forwarded before it is discarded."
DEFVAL { 31 }
::= { wlanMeshInterfaceEntry 2 }
wlanMeshPeeringEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable peering with neighbor mesh stations for this
interface."
DEFVAL { true }
::= { wlanMeshInterfaceEntry 3 }
wlanMeshForwardingEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable forwarding packets by this interface."
DEFVAL { true }
::= { wlanMeshInterfaceEntry 4 }
wlanMeshMetric OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
airtime(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The link metric protocol used by the interface."
DEFVAL { airtime }
::= { wlanMeshInterfaceEntry 5 }
wlanMeshPath OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
hwmp(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The path selection protocol used by the interface."
DEFVAL { hwmp }
::= { wlanMeshInterfaceEntry 6 }
wlanMeshRoutesFlush OBJECT-TYPE
SYNTAX INTEGER {
no-op(0),
flush(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to flush all mesh route entries from the mesh
routing table for the specified interface."
::= { wlanMeshInterfaceEntry 7 }
wlanMeshNeighborTable OBJECT-TYPE
SYNTAX SEQUENCE OF WlanMeshNeighborEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains information for the neighbors of wireless
interfaces operating in mesh mode."
::= { wlanMeshInterface 2 }
wlanMeshNeighborEntry OBJECT-TYPE
SYNTAX WlanMeshNeighborEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information for all neighbors of a wireless interface operating as
a mesh point."
INDEX { wlanIfaceName, wlanMeshNeighborAddress }
::= { wlanMeshNeighborTable 1 }
WlanMeshNeighborEntry ::= SEQUENCE {
wlanMeshNeighborAddress MacAddress,
wlanMeshNeighborFrequency INTEGER,
wlanMeshNeighborLocalId INTEGER,
wlanMeshNeighborPeerId INTEGER,
wlanMeshNeighborPeerState INTEGER,
wlanMeshNeighborCurrentTXRate INTEGER,
wlanMeshNeighborRxSignalStrength INTEGER,
wlanMeshNeighborIdleTimer INTEGER,
wlanMeshNeighborTxSequenceNo INTEGER,
wlanMeshNeighborRxSequenceNo INTEGER
}
wlanMeshNeighborAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Ethernet address of this neighbor."
::= { wlanMeshNeighborEntry 1 }
wlanMeshNeighborFrequency OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operating frequency for the link with this neighbor."
::= { wlanMeshNeighborEntry 2 }
wlanMeshNeighborLocalId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The local mesh id for this neighbor."
::= { wlanMeshNeighborEntry 3 }
wlanMeshNeighborPeerId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mesh peer id of this neighbor."
::= { wlanMeshNeighborEntry 4 }
wlanMeshNeighborPeerState OBJECT-TYPE
SYNTAX INTEGER {
idle(0),
openTx(1),
openRx(2),
confirmRx(3),
established(4),
closing(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current link state for this neighbor."
::= { wlanMeshNeighborEntry 5 }
wlanMeshNeighborCurrentTXRate OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current transmit rate for this neighbor."
::= { wlanMeshNeighborEntry 6 }
wlanMeshNeighborRxSignalStrength OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average receive signal strength for this neighbor."
::= { wlanMeshNeighborEntry 7 }
wlanMeshNeighborIdleTimer OBJECT-TYPE
SYNTAX INTEGER
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this neighbor's inactivity timer."
::= { wlanMeshNeighborEntry 8 }
wlanMeshNeighborTxSequenceNo OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last sequence number transmitted to this neighbor."
::= { wlanMeshNeighborEntry 9 }
wlanMeshNeighborRxSequenceNo OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last sequence number received from this neighbor."
::= { wlanMeshNeighborEntry 10 }
wlanMeshRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF WlanMeshRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains the mesh routing table for interfaces operating
as mesh points, used for forwarding packets on a mesh network."
::= { wlanMeshRoute 1 }
wlanMeshRouteEntry OBJECT-TYPE
SYNTAX WlanMeshRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Wireless Mesh Routing Table entries for virtual wireless interfaces."
INDEX { wlanIfaceName, wlanMeshRouteDestination }
::= { wlanMeshRouteTable 1 }
WlanMeshRouteEntry ::= SEQUENCE {
wlanMeshRouteDestination MacAddress,
wlanMeshRouteNextHop MacAddress,
wlanMeshRouteHops INTEGER,
wlanMeshRouteMetric Unsigned32,
wlanMeshRouteLifeTime Unsigned32,
wlanMeshRouteLastMseq Unsigned32,
wlanMeshRouteFlags BITS,
wlanMeshRouteStatus RowStatus
}
wlanMeshRouteDestination OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The mesh route entry's destination address."
::= { wlanMeshRouteEntry 1 }
wlanMeshRouteNextHop OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mesh route entry's next hop address."
::= { wlanMeshRouteEntry 2 }
wlanMeshRouteHops OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of hops for this mesh route entry."
::= { wlanMeshRouteEntry 3 }
wlanMeshRouteMetric OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The metric of this mesh route entry."
::= { wlanMeshRouteEntry 4 }
wlanMeshRouteLifeTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The life time of this mesh route entry."
::= { wlanMeshRouteEntry 5 }
wlanMeshRouteLastMseq OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last sequence number seen from this destination."
::= { wlanMeshRouteEntry 6 }
wlanMeshRouteFlags OBJECT-TYPE
SYNTAX BITS {
valid(1),
proxy(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Mesh Route entry's flags."
::= { wlanMeshRouteEntry 7 }
wlanMeshRouteStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object is used to add or delete entries from the mesh routing
table for the virtual wireless interface."
::= { wlanMeshRouteEntry 8 }
wlanMeshStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF WlanMeshStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains summary statistics for each virtual wireless
interface operating as mesh point."
::= { wlanMeshStatistics 1 }
wlanMeshStatsEntry OBJECT-TYPE
SYNTAX WlanMeshStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of statistics for each virtual wireless interface operating
as mesh point."
INDEX { wlanIfaceName }
::= { wlanMeshStatsTable 1 }
WlanMeshStatsEntry ::= SEQUENCE {
wlanMeshDroppedBadSta Counter32,
wlanMeshDroppedNoLink Counter32,
wlanMeshNoFwdTtl Counter32,
wlanMeshNoFwdBuf Counter32,
wlanMeshNoFwdTooShort Counter32,
wlanMeshNoFwdDisabled Counter32,
wlanMeshNoFwdPathUnknown Counter32,
wlanMeshDroppedBadAE Counter32,
wlanMeshRouteAddFailed Counter32,
wlanMeshDroppedNoProxy Counter32,
wlanMeshDroppedMisaligned Counter32
}
wlanMeshDroppedBadSta OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames dropped by this interface since they were
received from a non-mesh station."
::= { wlanMeshStatsEntry 1 }
wlanMeshDroppedNoLink OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames dropped by this interface since no link had
been established."
::= { wlanMeshStatsEntry 2 }
wlanMeshNoFwdTtl OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames that were not forwarded by this interface
because of a zero TTL."
::= { wlanMeshStatsEntry 3 }
wlanMeshNoFwdBuf OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames that were not forwarded by this interface
due to lack of free buffers."
::= { wlanMeshStatsEntry 4 }
wlanMeshNoFwdTooShort OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames that were not forwarded by this interface
due to missing headers."
::= { wlanMeshStatsEntry 5 }
wlanMeshNoFwdDisabled OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames that were not forwarded by this interface
since forwarding was disabled."
::= { wlanMeshStatsEntry 6 }
wlanMeshNoFwdPathUnknown OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames that were not forwarded by this interface
since the path was unknown."
::= { wlanMeshStatsEntry 7 }
wlanMeshDroppedBadAE OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames that were dropped by this interface since
the AE was invalid."
::= { wlanMeshStatsEntry 8 }
wlanMeshRouteAddFailed OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times an addition of a route to the mesh routing
table for this interface failed."
::= { wlanMeshStatsEntry 9 }
wlanMeshDroppedNoProxy OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames that were dropped by this interface since
proxying was not enabled on the interface."
::= { wlanMeshStatsEntry 10 }
wlanMeshDroppedMisaligned OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames that were dropped by this interface due to
bad alignment."
::= { wlanMeshStatsEntry 11 }
-- ---------------------------------------------------------- --
-- Subtrees containing data for each supported mesh routing protocol.
-- ---------------------------------------------------------- --
wlanMeshProtoHWMP OBJECT IDENTIFIER ::= { wlanMeshRouteProtocols 1 }
-- ---------------------------------------------------------- --
-- Hybrid Wireless Mesh Protocol database.
-- ---------------------------------------------------------- --
wlanMeshHWMPConfig OBJECT IDENTIFIER ::= { wlanMeshProtoHWMP 1 }
wlanMeshHWMPInterface OBJECT IDENTIFIER ::= { wlanMeshProtoHWMP 2 }
wlanMeshHWMPStatistics OBJECT IDENTIFIER ::= { wlanMeshProtoHWMP 3 }
wlanHWMPRouteInactiveTimeout OBJECT-TYPE
SYNTAX INTEGER
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The HWMP Route inactivity timeout."
DEFVAL { 5000 }
::= { wlanMeshHWMPConfig 1 }
wlanHWMPRootAnnounceInterval OBJECT-TYPE
SYNTAX INTEGER
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The HWMP Root Announcement interval."
DEFVAL { 1000 }
::= { wlanMeshHWMPConfig 2 }
wlanHWMPRootInterval OBJECT-TYPE
SYNTAX INTEGER
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The HWMP Root interval."
DEFVAL { 2000 }
::= { wlanMeshHWMPConfig 3 }
wlanHWMPRootTimeout OBJECT-TYPE
SYNTAX INTEGER
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The root PREQ timeout."
DEFVAL { 5000 }
::= { wlanMeshHWMPConfig 4 }
wlanHWMPPathLifetime OBJECT-TYPE
SYNTAX INTEGER
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The HWMP path entry lifetime."
DEFVAL { 500 }
::= { wlanMeshHWMPConfig 5 }
wlanHWMPReplyForwardBit OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A non-zero value for this object specifies that RF bit shall be
set on generated PREQs."
DEFVAL { 1 }
::= { wlanMeshHWMPConfig 6 }
wlanHWMPTargetOnlyBit OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A non-zero value for this object specifies that TO bit shall be
set on generated PREQs."
DEFVAL { 0 }
::= { wlanMeshHWMPConfig 7 }
wlanHWMPInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF WlanHWMPInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains information for wireless interfaces
operating in mesh mode."
::= { wlanMeshHWMPInterface 1 }
wlanHWMPInterfaceEntry OBJECT-TYPE
SYNTAX WlanHWMPInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Wireless Mesh Routing HWMP information for a wireless interface."
INDEX { wlanIfaceName }
::= { wlanHWMPInterfaceTable 1 }
WlanHWMPInterfaceEntry ::= SEQUENCE {
wlanHWMPRootMode INTEGER,
wlanHWMPMaxHops INTEGER
}
wlanHWMPRootMode OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
normal(2),
proactive(3),
rann(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to configure whether the interface will operate
as root node and specify root node mode."
DEFVAL { disabled }
::= { wlanHWMPInterfaceEntry 1 }
wlanHWMPMaxHops OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum number of hops allowed on an HMWP path for this interface."
DEFVAL { 31 }
::= { wlanHWMPInterfaceEntry 2 }
wlanMeshHWMPStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF WlanMeshHWMPStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains summary statistics for HWMP operation on an
interface operating as mesh point."
::= { wlanMeshHWMPStatistics 1 }
wlanMeshHWMPStatsEntry OBJECT-TYPE
SYNTAX WlanMeshHWMPStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of HWMP statistics for each wlan interface operating as HWMP
mesh point."
INDEX { wlanIfaceName }
::= { wlanMeshHWMPStatsTable 1 }
WlanMeshHWMPStatsEntry ::= SEQUENCE {
wlanMeshHWMPWrongSeqNo Counter32,
wlanMeshHWMPTxRootPREQ Counter32,
wlanMeshHWMPTxRootRANN Counter32,
wlanMeshHWMPProxy Counter32
}
wlanMeshHWMPWrongSeqNo OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of HWMP frames with wrong sequence number received by
this interface."
::= { wlanMeshHWMPStatsEntry 1 }
wlanMeshHWMPTxRootPREQ OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of HWMP Root PREQ frames sent by this interface."
::= { wlanMeshHWMPStatsEntry 2 }
wlanMeshHWMPTxRootRANN OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of HWMP Root RANN frames sent by this interface."
::= { wlanMeshHWMPStatsEntry 3 }
wlanMeshHWMPProxy OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of HWMP PREP frames discarded by this interface due to
the HWMP route being marked as proxy."
::= { wlanMeshHWMPStatsEntry 4 }
END