mibs/MIBS/quanta/fastpath_dhcp.my
2023-12-05 12:25:34 +01:00

1020 lines
42 KiB
Plaintext

-- DHCP Server MIB overview:
-- DHCP Server MIB falls under lb6m MIB node of the private subtree.
NETGEAR-DHCPSERVER-PRIVATE-MIB DEFINITIONS ::= BEGIN
-- NETGEAR NETGEAR DHCP Server MIB
-- Copyright Netgear Inc (2002-2007) All rights reserved.
-- This SNMP Management Information Specification
-- embodies Netgear Inc's confidential and proprietary
-- intellectual property. Netgear Inc retains all title
-- and ownership in the Specification including any revisions.
-- This Specification is supplied "AS IS", Netgear Inc
-- makes no warranty, either expressed or implied,
-- as to the use, operation, condition, or performance of the
-- Specification.
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, IpAddress,
Integer32, Unsigned32, TimeTicks, Counter32
FROM SNMPv2-SMI
TEXTUAL-CONVENTION, RowStatus, RowPointer, MacAddress,
StorageType, TruthValue FROM SNMPv2-TC
DisplayString, PhysAddress FROM RFC1213-MIB
lb6m FROM QUANTA-LB6M-REF-MIB;
fastPathDHCPServerPrivate MODULE-IDENTITY
LAST-UPDATED "201101260000Z" -- 26 January 2011 12:00:00 GMT
ORGANIZATION "Netgear Inc"
CONTACT-INFO ""
DESCRIPTION
"The Netgear Private MIB for NETGEAR DHCP Server"
-- Revision history.
REVISION
"201101260000Z" -- 26 January 2011 12:00:00 GMT
DESCRIPTION
"Postal address updated."
REVISION
"200705230000Z" -- 23 May 2007 12:00:00 GMT
DESCRIPTION
"Netgear branding related changes."
::= { lb6m 12 }
--**************************************************************************************
-- agentDhcpServerGroup -> contains MIB objects displaying various properties of a DHCP server
--
--**************************************************************************************
agentDhcpServerGroup OBJECT IDENTIFIER ::= { fastPathDHCPServerPrivate 1 }
agentDhcpServerAdminMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Admin-mode of the DHCP Server."
DEFVAL { disable }
::= { agentDhcpServerGroup 1 }
agentDhcpServerPingPktNos OBJECT-TYPE
SYNTAX INTEGER (0 | 2..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The no. of packets a DHCP Server sends to a pool address as part of a ping operation.Setting the value of ping-packets to zero turns off DHCP Server ping operation ."
DEFVAL { 2 }
::= { agentDhcpServerGroup 2 }
agentDhcpServerAutomaticBindingsNos OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The no. of IP addresses that have been assigned automatically."
::= { agentDhcpServerGroup 3 }
agentDhcpServerExpiredBindingsNos OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The no. of expired leases."
::= { agentDhcpServerGroup 4 }
agentDhcpServerMalformedMessagesReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The no. of malformed(truncated or corrupt) messages that have been received by the DHCP server."
::= { agentDhcpServerGroup 5 }
agentDhcpServerDISCOVERMessagesReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The no. of DHCP messages of type DHCPDISCOVER that have been received by the DHCP server."
::= { agentDhcpServerGroup 6 }
agentDhcpServerREQUESTMessagesReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The no. of DHCP messages of type DHCPREQUEST that have been received by the DHCP server."
::= { agentDhcpServerGroup 7 }
agentDhcpServerDECLINEMessagesReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The no. of DHCP messages of type DHCPDECLINE that have been received by the DHCP server."
::= { agentDhcpServerGroup 8 }
agentDhcpServerRELEASEMessagesReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The no. of DHCP messages of type DHCPRELEASE that have been received by the DHCP server."
::= { agentDhcpServerGroup 9 }
agentDhcpServerINFORMMessagesReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The no. of DHCP messages of type DHCPINFORM that have been received by the DHCP server."
::= { agentDhcpServerGroup 10 }
agentDhcpServerOFFERMessagesSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The no. of DHCP messages of type DHCPOFFER that have been sent by the DHCP server."
::= { agentDhcpServerGroup 11 }
agentDhcpServerACKMessagesSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The no. of DHCP messages of type DHCPACK that have been sent by the DHCP server."
::= { agentDhcpServerGroup 12 }
agentDhcpServerNAKMessagesSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The no. of DHCP messages of type DHCPNAK that have been sent by the DHCP server."
::= { agentDhcpServerGroup 13 }
agentDhcpServerClearStatistics OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Clears the DHCP server statistics."
DEFVAL { disable }
::= { agentDhcpServerGroup 14 }
agentDhcpServerBootpAutomatic OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used to enable or disable autmatic address allocation to bootp clients from dynamic address pools."
DEFVAL { disable }
::= { agentDhcpServerGroup 15 }
agentDhcpServerDISCOVERMessagesDiscarded OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The number of DHCP DISCOVER messages dropped by the DHCP Server due to the DHCP pool exhaustion or if the maximum number of allocations are done."
::= { agentDhcpServerGroup 16 }
--**********************************************************************************
-- agentDhcpServerPoolConfigGroup
-- This group contains three tables : agentDhcpServerPoolConfigTable,
-- agentDhcpServerBindingTable,
--
-- agentDhcpServerPoolConfigTable -> This table is used to configure a
-- new DHCP address pool on a DHCP server. This table
-- is also used to delete a configured DHCP address pool.
--
-- agentDhcpServerPoolAllocationTable -> This table is used to configure a DHCP address
-- pool for dynamic and manual allocations.
--
-- agentDhcpServerExcludedAddressRangeTable -> This table lists the excluded-address ranges
-- for a DHCP Server
--
-- agentDhcpServerPoolOptionTable -> Table for DHCP Server options
--**********************************************************************************
agentDhcpServerPoolConfigGroup OBJECT IDENTIFIER ::= { fastPathDHCPServerPrivate 2 }
agentDhcpServerPoolNameCreate OBJECT-TYPE
SYNTAX DisplayString (SIZE(0|1..31))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A pool is created by applying write operation
on this MIB object and providing a new pool-name.
Get operation on this MIB object returns a
null-value, as for the purpose of viewing the
pool name, the user should perform the
traversal of agentDhcpServerPoolConfigTable.
For this reason the get operation on object
agentDhcpServerPoolNameCreate becomes insignificant."
::= { agentDhcpServerPoolConfigGroup 1 }
agentDhcpServerPoolConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentDhcpServerPoolConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of the DHCP Server Pool configuration entries."
::= { agentDhcpServerPoolConfigGroup 2 }
agentDhcpServerPoolConfigEntry OBJECT-TYPE
SYNTAX AgentDhcpServerPoolConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Represents entry for a Dhcp server pool."
INDEX { agentDhcpServerPoolIndex }
::= { agentDhcpServerPoolConfigTable 1 }
AgentDhcpServerPoolConfigEntry ::= SEQUENCE {
agentDhcpServerPoolIndex
Unsigned32,
agentDhcpServerPoolName
DisplayString,
agentDhcpServerPoolDefRouter
DisplayString,
agentDhcpServerPoolDNSServer
DisplayString,
agentDhcpServerPoolLeaseTime
Integer32,
agentDhcpServerPoolType
INTEGER,
agentDhcpServerPoolNetbiosNameServer
DisplayString,
agentDhcpServerPoolNetbiosNodeType
INTEGER,
agentDhcpServerPoolSNTPServer
IpAddress,
agentDhcpServerPoolNextServer
IpAddress,
agentDhcpServerPoolDomainName
DisplayString,
agentDhcpServerPoolBootfile
DisplayString,
agentDhcpServerPoolRowStatus
RowStatus
}
agentDhcpServerPoolIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..512)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Pool Index, which 'll be used as index for the PoolConfig Table."
::= { agentDhcpServerPoolConfigEntry 1 }
agentDhcpServerPoolName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the DHCP Address pool. This value cannot be modified"
::= { agentDhcpServerPoolConfigEntry 2 }
agentDhcpServerPoolDefRouter OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This specifies the default-router list(each default-router is
separated by comma and the list is terminated by semi-colon) for a DHCP client,
an example would be 10.10.1.1,192.168.36.1,157.227.44.1;(no spaces in between).User should enter a 'null' or 'NULL' string to remove current default-router list."
::= { agentDhcpServerPoolConfigEntry 3 }
agentDhcpServerPoolDNSServer OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This specifies the DNS IP servers(each DNS IP server is
separated by comma and the list is terminated by semi-colon) for a DHCP client,
an example would be 10.10.1.1,192.168.36.1,157.227.44.1;(no spaces in between).User should enter a 'null' or 'NULL' string to remove current default-router list."
::= { agentDhcpServerPoolConfigEntry 4 }
agentDhcpServerPoolLeaseTime OBJECT-TYPE
SYNTAX Integer32 (1..86400)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This specifies the duration of the lease(in minutes) for an IP address that is assigened from a
DHCP server to a DHCP client. For infinite leases, lease-time value will be set to
86400."
::= { agentDhcpServerPoolConfigEntry 5 }
agentDhcpServerPoolType OBJECT-TYPE
SYNTAX INTEGER{
un-allocated(0),
dynamic(1),
manual(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This specifies the type of the binding that is associated with this pool."
::= { agentDhcpServerPoolConfigEntry 6 }
agentDhcpServerPoolNetbiosNameServer OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This specifies the IP address-list of Net BIOS name-servers that are
available to DHCP clients
(each IP address in this list is
separated by comma and the list is terminated by semi-colon),
an example would be 10.10.1.1,192.168.36.1,157.227.44.1;(no spaces in between).User should enter a 'null' or 'NULL' string to remove current Net BIOS name-server list."
::= { agentDhcpServerPoolConfigEntry 7 }
agentDhcpServerPoolNetbiosNodeType OBJECT-TYPE
SYNTAX INTEGER {
none(0),
b-node(1),
p-node(2),
m-node(4),
h-node(8)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This specifies the NetBIOS node-type for DHCP clients. 'none' is shown if
node-type is not set to any of the four values."
::= { agentDhcpServerPoolConfigEntry 8 }
agentDhcpServerPoolSNTPServer OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This configures the SNTP server in the boot-process of a DHCP clients.User should enter zero(0.0.0.0) to remove the current SNTP server address"
::= { agentDhcpServerPoolConfigEntry 9 }
agentDhcpServerPoolNextServer OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This configures the next server in the boot-process of a DHCP clients.User should enter zero(0.0.0.0) to remove the current Next-server address"
::= { agentDhcpServerPoolConfigEntry 10 }
agentDhcpServerPoolDomainName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This specifies the domain-name for a DHCP client. User should enter a 'null' or 'NULL' string to remove specified domain-name."
::= { agentDhcpServerPoolConfigEntry 11 }
agentDhcpServerPoolBootfile OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This specifies the name of the default boot image for a DHCP client.User should enter a 'null' or 'NULL' string to remove specified bootfile name."
::= { agentDhcpServerPoolConfigEntry 12 }
agentDhcpServerPoolRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The row status variable is used according to installation
and removal conventions for conceptual rows. When a pool is created by applying write
operation on 'agentDhcpServerPoolCreateName',row-status becomes 'active'. If row-status for
a poolEntry is set to 'destroy', the corresponding pool gets deleted. "
::= { agentDhcpServerPoolConfigEntry 13 }
--**********************************************************************************
agentDhcpServerPoolAllocationTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentDhcpServerPoolAllocationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of the DHCP Server's pool entries, showing the binding(dynamic/manual)
specific parameters."
::= { agentDhcpServerPoolConfigGroup 3 }
agentDhcpServerPoolAllocationEntry OBJECT-TYPE
SYNTAX AgentDhcpServerPoolAllocationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Represents entry for a Dhcp server's allocation pool."
AUGMENTS { agentDhcpServerPoolConfigEntry }
::= { agentDhcpServerPoolAllocationTable 1 }
-- All objects are of type read-write
AgentDhcpServerPoolAllocationEntry ::= SEQUENCE {
agentDhcpServerPoolAllocationName
DisplayString,
agentDhcpServerDynamicPoolIpAddress
IpAddress,
agentDhcpServerDynamicPoolIpMask
IpAddress,
agentDhcpServerDynamicPoolIpPrefixLength
Unsigned32,
agentDhcpServerPoolAllocationType
INTEGER,
agentDhcpServerManualPoolClientIdentifier
DisplayString,
agentDhcpServerManualPoolClientName
DisplayString,
agentDhcpServerManualPoolClientHWAddr
DisplayString,
agentDhcpServerManualPoolClientHWType
INTEGER,
agentDhcpServerManualPoolIpAddress
IpAddress,
agentDhcpServerManualPoolIpMask
IpAddress,
agentDhcpServerManualPoolIpPrefixLength
Unsigned32
}
agentDhcpServerPoolAllocationName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..30))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This specifies name of the DHCP Address pool having dynamic binding.
This value is same as agentDhcpServerPoolName of the agentDhcpServerPoolConfigTable."
::= { agentDhcpServerPoolAllocationEntry 1 }
agentDhcpServerDynamicPoolIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address of the DHCP Address pool.
The IP address must be set before setting the IP Mask or IP Prefix Length.
After setting IP address, network -mask, or IP Prefix length must be set in order to change the pool type to dynamic.
This value shows 0.0.0.0, if the binding type is 'un-allocated',or,'manual'."
::= { agentDhcpServerPoolAllocationEntry 2 }
agentDhcpServerDynamicPoolIpMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The bit-combination that renders which portion of the address of the DHCP
address pool refers to the network or subnet and which part refers to the host.The IP address must have been set before.
This value shows 0.0.0.0, if the binding type is 'un-allocated',or,'manual'."
::= { agentDhcpServerPoolAllocationEntry 3 }
agentDhcpServerDynamicPoolIpPrefixLength OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This specifies the no. of bits that comprise the address-prefix.
The prefix is an alternative way of specifying the network-mask of the client.The IP address must have been set before.
This value shows 0, if the binding type is 'un-allocated',or,'mnaual'."
::= { agentDhcpServerPoolAllocationEntry 4 }
agentDhcpServerPoolAllocationType OBJECT-TYPE
SYNTAX INTEGER{
un-allocated(0),
dynamic(1),
manual(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This specifies the type of the binding that is associated with this pool."
::= { agentDhcpServerPoolAllocationEntry 5 }
agentDhcpServerManualPoolClientIdentifier OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"It specifies the unique identifier (in colon separated hexadecimal format)
of a DHCP client. It is valid for manual bindings only.
It displays 'unconfigured',if the binding type is 'un-allocated',or,'dynamic'.
To set this object, input should be 7 octets long with the hardware
type in the first octet."
::= { agentDhcpServerPoolAllocationEntry 6 }
agentDhcpServerManualPoolClientName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..30))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"It specifies the name of a DHCP client.
Client name should't include domain-name.
It displays 'unconfigured',if the binding type is 'un-allocated',or,'dynamic'. "
::= { agentDhcpServerPoolAllocationEntry 7 }
agentDhcpServerManualPoolClientHWAddr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"It specifies the hardware-address of a DHCP client. It is valid for manual bindings only.
It displays 'unconfigured',if the binding type is 'un-allocated',or,'dynamic'.
After hardware-address, hardware-type will be configured."
::= { agentDhcpServerPoolAllocationEntry 8 }
agentDhcpServerManualPoolClientHWType OBJECT-TYPE
SYNTAX INTEGER{
ethernet(1),
ieee802(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"It specifies the hardware-type of a DHCP client. It is valid for manual bindings only.
It displays 'unconfigured',if the binding type is 'un-allocated',or,'dynamic'.
Before this, hardware-address must be configured."
DEFVAL { ethernet }
::= { agentDhcpServerPoolAllocationEntry 9 }
agentDhcpServerManualPoolIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address of the DHCP Address pool for manual binding.
The IP address must be set before setting the IP Mask or IP Prefix Length.After setting IP address, network -mask, or IP Prefix length must be set in order to change the pool type to dynamic.
This value shows 0.0.0.0, if the binding type is 'un-allocated',or,'dynamic'."
::= { agentDhcpServerPoolAllocationEntry 10 }
agentDhcpServerManualPoolIpMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The bit-combination that renders which portion of the address of the DHCP
address pool for a manual binding refers to the network or subnet and which part refers to the host.
The IP address must have been set before.
This value shows 0.0.0.0, if the binding type is 'un-allocated',or,'dynamic'."
::= { agentDhcpServerPoolAllocationEntry 11 }
agentDhcpServerManualPoolIpPrefixLength OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This specifies the no. of bits that comprise the address-prefix.
The prefix is an alternative way of specifying the network-mask of the client.The IP address must have been set before.
This value shows 0, if the binding type is 'un-allocated',or,'dynamic'."
::= { agentDhcpServerPoolAllocationEntry 12 }
--***********************************************************************************************
agentDhcpServerExcludedAddressRangeCreate OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"It sets the IP address-ranges(from low to high) that a
DHCP server should not assign to DHCP clients. Each time
this MIB object is set successfully, one excluded range
of IP address will be set.
It is given in format - start and end IP address
separated by '-' and terminated by ';'.
One example would be - 192.168.36.1-200.1.1.1; .
This sets one excluded range of IP address,which
starts at 192.168.36.1 and ends at 200.1.1.1.
If only start IP address is given,
end IP address is assumed to be equal to the start IP
address. Get operation on this MIB object returns a
null-value, as for the purpose of viewing the
exclude-address ranges, the user should perform the
traversal of agentDhcpServerExcludedAddressRangeTable.
For this reason the get operation on object
agentDhcpServerExcludedAddressRangeCreate becomes insignificant."
::= { agentDhcpServerPoolConfigGroup 4 }
agentDhcpServerExcludedAddressRangeTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentDhcpServerExcludedAddressRangeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of the DHCP Server Pool configuration entries."
::= { agentDhcpServerPoolConfigGroup 5 }
agentDhcpServerExcludedAddressRangeEntry OBJECT-TYPE
SYNTAX AgentDhcpServerExcludedAddressRangeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Represents entry for a Dhcp server excluded address range table."
INDEX { agentDhcpServerExcludedRangeIndex }
::= { agentDhcpServerExcludedAddressRangeTable 1 }
-- All objects are of type read-only, except agentDhcpServerExcludedAddressRangeStatus,
-- which is of type read-write
AgentDhcpServerExcludedAddressRangeEntry ::= SEQUENCE {
agentDhcpServerExcludedRangeIndex
Unsigned32,
agentDhcpServerExcludedStartIpAddress
IpAddress,
agentDhcpServerExcludedEndIpAddress
IpAddress,
agentDhcpServerExcludedAddressRangeStatus
RowStatus
}
agentDhcpServerExcludedRangeIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..256)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This specifies the index of the excluded IP address-range table."
::= { agentDhcpServerExcludedAddressRangeEntry 1 }
agentDhcpServerExcludedStartIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This specifies the starting IP address of the excluded address-range."
::= { agentDhcpServerExcludedAddressRangeEntry 2 }
agentDhcpServerExcludedEndIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This specifies the ending IP address of the excluded address-range."
::= { agentDhcpServerExcludedAddressRangeEntry 3 }
agentDhcpServerExcludedAddressRangeStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This specifies the row-status of the excluded address-range. Implemented values
are - active(1) and destroy(6). For a valid range, the row-satus will return active(1).
When it is set to destroy(6), the corresponding address-range is deleted."
::= { agentDhcpServerExcludedAddressRangeEntry 4 }
--***********************************************************************************************
agentDhcpServerPoolOptionCreate OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This sets the option for an existing DHCP Server pool. Here, it is required
to enter the pool-index, for which option is to be set and
the value of the DHCP option code in string-format : pool-index and option code
separated by '-' and terminated by ';', one example would be -> 1-19;
, 1 is the pool-index and 19 is the option code. "
::= { agentDhcpServerPoolConfigGroup 6 }
agentDhcpServerPoolOptionTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentDhcpServerPoolOptionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table for configuring DHCP Server options."
::= { agentDhcpServerPoolConfigGroup 7 }
agentDhcpServerPoolOptionEntry OBJECT-TYPE
SYNTAX AgentDhcpServerPoolOptionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Represents entry for a Dhcp server option table."
INDEX { agentDhcpServerPoolOptionIndex,
agentDhcpServerPoolOptionCode }
::= { agentDhcpServerPoolOptionTable 1 }
-- All objects are of type read-write, except the indexes agentDhcpServerPoolOptionIndex and
-- agentDhcpServerPoolOptionCode
-- For a particular poolOption entry, option data ( ASCII, HEX and IP Address) can be
-- entered multiple times provided data-format is same each time.
AgentDhcpServerPoolOptionEntry ::= SEQUENCE {
agentDhcpServerPoolOptionIndex
Unsigned32,
agentDhcpServerPoolOptionCode
Unsigned32,
agentDhcpServerOptionPoolName
DisplayString,
agentDhcpServerPoolOptionAsciiData
DisplayString,
agentDhcpServerPoolOptionHexData
DisplayString,
agentDhcpServerPoolOptionIpAddressData
DisplayString,
agentDhcpServerPoolOptionStatus
RowStatus
}
agentDhcpServerPoolOptionIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..512)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Pool Index alongwith option-code, acts as index for the DHCP Server Option table.
"
::= { agentDhcpServerPoolOptionEntry 1 }
agentDhcpServerPoolOptionCode OBJECT-TYPE
SYNTAX Unsigned32 (1..254)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This specifies the DHCP option code. This alongwith pool-index acts as the index of the
DHCP Server Option table."
::= { agentDhcpServerPoolOptionEntry 2 }
agentDhcpServerOptionPoolName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the DHCP Address pool. This value cannot be modified"
::= { agentDhcpServerPoolOptionEntry 3 }
agentDhcpServerPoolOptionAsciiData OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..441))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This specifies an NVT ASCII character string. ASCII character strings
that contain white space must be delimited by quotation marks.
If an ascii optiondata is entered again, it gets concatenated with the
previous ascii data."
::= { agentDhcpServerPoolOptionEntry 4 }
agentDhcpServerPoolOptionHexData OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..1324))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This specifies semi-colon separated hexadecimal data. Two hexadecimal digits
in hexadecimal character string represents one byte . Hexadecimal strings can
be entered in the following formats :
1) continuous hexadecimal digits like -- 0123456789abcdef
2) hexadecimal digits separated by space ' ' -- 01 23 45 67 de 0f
3) Two hexadecimal digits separated by delimeter ':' -- 01:02:a0 de:0f 78:5e
4) Four hexadecimal digits separated by delimeter '.' -- 01ab.c0de.7865
If a Hex optiondata is entered again, it gets concatenated with the
previous Hex data."
::= { agentDhcpServerPoolOptionEntry 5 }
agentDhcpServerPoolOptionIpAddressData OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This specifies the IP-address list(each IP-address is
separated by comma and the list is terminated by semi-colon) for a DHCP client,
an example would be 10.10.1.1,192.168.36.1,157.227.44.1;(no spaces in between).
If a IP option is entered again, it gets concatenated with the
previous IP data.
Maximum no. of IP addresses that can be entered at one time is 8.
"
::= { agentDhcpServerPoolOptionEntry 6 }
agentDhcpServerPoolOptionStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This specifies the row-status of the DHCP Server Pool option."
::= { agentDhcpServerPoolOptionEntry 7 }
--**************************************************************************************
-- agentDhcpServerLeaseGroup -> contains MIB objects displaying and clearing leases of a DHCP server
--
--**************************************************************************************
agentDhcpServerLeaseGroup OBJECT IDENTIFIER ::= { fastPathDHCPServerPrivate 3 }
agentDhcpServerLeaseClearAllBindings OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Clears All the DHCP server bindings."
DEFVAL { disable }
::= { agentDhcpServerLeaseGroup 1}
agentDhcpServerLeaseTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentDhcpServerLeaseEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of the DHCP Server's Lease entries."
::= { agentDhcpServerLeaseGroup 2 }
agentDhcpServerLeaseEntry OBJECT-TYPE
SYNTAX AgentDhcpServerLeaseEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Represents entry for a Dhcp server's leases."
INDEX { agentDhcpServerLeaseIPAddress }
::= { agentDhcpServerLeaseTable 1 }
-- All objects are of type read-only
AgentDhcpServerLeaseEntry ::= SEQUENCE {
agentDhcpServerLeaseIPAddress
IpAddress,
agentDhcpServerLeaseIPMask
IpAddress,
agentDhcpServerLeaseHWAddress
MacAddress,
agentDhcpServerLeaseRemainingTime
TimeTicks,
agentDhcpServerLeaseType
INTEGER,
agentDhcpServerLeaseStatus
RowStatus
}
agentDhcpServerLeaseIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This specifies the IP address leased to the client."
::= { agentDhcpServerLeaseEntry 1 }
agentDhcpServerLeaseIPMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This specifies the IP mask of the address leased to the client."
::= { agentDhcpServerLeaseEntry 2 }
agentDhcpServerLeaseHWAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This specifies the hardware address of the client."
::= { agentDhcpServerLeaseEntry 3 }
agentDhcpServerLeaseRemainingTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This specifies the period for which the lease is valid. It is displayed in days, hours, minutes, and seconds."
::= { agentDhcpServerLeaseEntry 4 }
agentDhcpServerLeaseType OBJECT-TYPE
SYNTAX INTEGER{
automatic(1),
manual(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This specifies the type of address lease as Automatic or Manual."
::= { agentDhcpServerLeaseEntry 5 }
agentDhcpServerLeaseStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This specifies the row-status of the address-lease. Implemented values
are - active(1) and destroy(6). For a valid range, the row-satus will return active(1).
When it is set to destroy(6), the corresponding address-lease is cleared."
::= { agentDhcpServerLeaseEntry 6 }
--**************************************************************************************
-- agentDhcpServerAddressConflictGroup -> contains MIB objects displaying and clearing
-- address conflicts found by a DHCP server, when addresses are offered to the client.
--
--**************************************************************************************
agentDhcpServerAddressConflictGroup OBJECT IDENTIFIER ::= { fastPathDHCPServerPrivate 4 }
agentDhcpServerClearAllAddressConflicts OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Clears all the address-conflicts found by DHCP server,when set to enable."
DEFVAL { disable }
::= { agentDhcpServerAddressConflictGroup 1}
agentDhcpServerAddressConflictLogging OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" It is used to enable, or disables the logging of address-conflicts on a DHCP Server."
DEFVAL { enable }
::= { agentDhcpServerAddressConflictGroup 2}
agentDhcpServerAddressConflictTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentDhcpServerAddressConflictEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of the conflicting-address entries."
::= { agentDhcpServerAddressConflictGroup 3 }
agentDhcpServerAddressConflictEntry OBJECT-TYPE
SYNTAX AgentDhcpServerAddressConflictEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Represents a conflicting-address entry."
INDEX { agentDhcpServerAddressConflictIP }
::= { agentDhcpServerAddressConflictTable 1 }
-- All objects are of type read-only, except agentDhcpServerAddressConflictStatus which is
-- of type read-write
AgentDhcpServerAddressConflictEntry ::= SEQUENCE {
agentDhcpServerAddressConflictIP
IpAddress,
agentDhcpServerAddressConflictDetectionType
INTEGER,
agentDhcpServerAddressConflictDetectionTime
TimeTicks,
agentDhcpServerAddressConflictStatus
RowStatus
}
agentDhcpServerAddressConflictIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This specifies the conflicting IP address assigned to the client by DHCP server."
::= { agentDhcpServerAddressConflictEntry 1 }
agentDhcpServerAddressConflictDetectionType OBJECT-TYPE
SYNTAX INTEGER{
ping(1),
gratuitousArp(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This specifies the address-conflict detection-method."
::= { agentDhcpServerAddressConflictEntry 2 }
agentDhcpServerAddressConflictDetectionTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This specifies the sysUpTime at which the address-conflict was detected."
::= { agentDhcpServerAddressConflictEntry 3 }
agentDhcpServerAddressConflictStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This specifies the row-status of the conflicting-address entry. Implemented values
are - active(1) and destroy(6). For a valid range, the row-satus will return active(1).
When it is set to destroy(6), the corresponding conflicting-address entry is cleared."
::= { agentDhcpServerAddressConflictEntry 4 }
END