2869 lines
111 KiB
Plaintext
2869 lines
111 KiB
Plaintext
--MibName=raisecomOpticalMonitorMIB
|
||
-- *****************************************************************
|
||
-- RAISECOM-OPTICAL-TRANSCEIVER-MIB.my
|
||
--
|
||
-- Copyright(c) 2003-2005 by RAISECOM TECH, Ltd.
|
||
-- All rights reserved.
|
||
-- *****************************************************************
|
||
|
||
-- *****************************************************************
|
||
-- Modi Report£ºFormat: <number>, <time>, <author>, <desc>
|
||
-- 01, 20110623, yangzhognhong, change the value of the node raisecomOpticalTransceiverMediaType
|
||
-- for SFP+ development
|
||
--
|
||
-- *****************************************************************
|
||
|
||
|
||
RAISECOM-OPTICAL-TRANSCEIVER-MIB DEFINITIONS ::= BEGIN
|
||
|
||
IMPORTS
|
||
Integer32, Unsigned32,
|
||
MODULE-IDENTITY,
|
||
NOTIFICATION-TYPE,
|
||
OBJECT-TYPE,
|
||
TimeTicks FROM SNMPv2-SMI
|
||
raisecomAgent
|
||
FROM RAISECOM-BASE-MIB
|
||
TEXTUAL-CONVENTION FROM SNMPv2-TC
|
||
MODULE-COMPLIANCE,
|
||
NOTIFICATION-GROUP,
|
||
OBJECT-GROUP FROM SNMPv2-CONF
|
||
ifIndex FROM IF-MIB
|
||
raisecomNotificationLocation FROM RAISECOM-COMMON-MANAGEMENT-MIB
|
||
ClearVar FROM SWITCH-TC;
|
||
|
||
raisecomOpticalTransceiver MODULE-IDENTITY
|
||
LAST-UPDATED "201005190000Z"
|
||
ORGANIZATION "Raisecom, Inc."
|
||
CONTACT-INFO
|
||
" Raise Systems
|
||
|
||
Postal: Beijing,
|
||
China
|
||
|
||
Tel: 86-010-82884499
|
||
|
||
E-mail: chenyu@raisecom.com"
|
||
DESCRIPTION
|
||
"This MIB module defines objects to monitor optical
|
||
characteristics on the optical interfaces in a network element. "
|
||
REVISION "201005190000Z"
|
||
DESCRIPTION
|
||
"The initial revision of this MIB."
|
||
::={ raisecomAgent 18 }
|
||
|
||
|
||
-- Textual Conventions
|
||
EnableVar ::= TEXTUAL-CONVENTION
|
||
STATUS current
|
||
DESCRIPTION
|
||
"enable or disable a function."
|
||
SYNTAX INTEGER {
|
||
enable(1),
|
||
disable(2)
|
||
}
|
||
|
||
OpticalParameterType ::= TEXTUAL-CONVENTION
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This value indicates the optical parameter that is
|
||
being monitored. Valid values are -OpticalParameterType
|
||
|
||
transceiverTemperature(1) :transceiver temperature
|
||
txbiasCurrent(2) :TX bias current
|
||
txPower(3) :TX output power
|
||
rxPower(4) :RX received optical power
|
||
laserTemperature(5) :laser temperature
|
||
p5V0supplyVoltage(6) :+5V supply voltage
|
||
p3V3supplyVoltage(7) :+3.3V supply voltage
|
||
p1V8supplyVoltage(8) :+1.8V supply voltage
|
||
n5V2supplyVoltage(9) :-5.2V supply voltage
|
||
apdBiasVoltage(10) :APD bias voltage
|
||
p5V0supplyCurrent(11) :+5V supply currnet
|
||
p3V3supplyCurrent(12) :+3.3V supply currnet
|
||
p1V8supplyCurrent(13) :+1.8V supply currnet
|
||
n5V2supplyCurrent(14) :-5.2V supply currnet
|
||
tecCurrent(15) :TEC currnet
|
||
laserWavelength(16) :laser wavelength
|
||
|
||
"
|
||
|
||
SYNTAX INTEGER {
|
||
transceiverTemperature (1),
|
||
txbiasCurrent (2),
|
||
txPower (3),
|
||
rxPower (4),
|
||
laserTemperature(5),
|
||
p5V0supplyVoltage(6),
|
||
p3V3supplyVoltage(7),
|
||
p1V8supplyVoltage(8),
|
||
n5V2supplyVoltage(9),
|
||
apdBiasVoltage(10),
|
||
p5V0supplyCurrent(11),
|
||
p3V3supplyCurrent(12),
|
||
p1V8supplyCurrent(13),
|
||
n5V2supplyCurrent(14),
|
||
tecCurrent(15),
|
||
laserWavelength(16)
|
||
|
||
}
|
||
|
||
|
||
OpticalParameterValue ::= TEXTUAL-CONVENTION
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The value of the optical parameter that is being monitored.
|
||
The range of values varies depending on the type of optical parameter being monitored,
|
||
as identified by a corresponding object with syntax OpticalParameterType.
|
||
When the optical parameter being monitored is 'XXTemperature',the supported range
|
||
is from -40000 to 125000, in units of 1/1000 degrees centigrade.
|
||
Example: A value of 23500 represents a temperature reading of 23.5 degrees C.
|
||
The temperature is shown in unit of degrees centigrade, and the precision is 0.1.
|
||
When the optical parameter being monitored is 'txbiasCurrent',the supported range
|
||
is from 0 to 131000, in units of 1/1000 mA.
|
||
Example: A value of 1000 represents a TX bias current reading of 1.0mA.
|
||
The 'txbiasCurrent'is shown in unit of mA, and the precision is 0.1.
|
||
When the optical parameter being monitored is 'txPower',the supported range
|
||
is from -40000 to 8200, in units of 1/1000 dbm.
|
||
Example: A value of 77800 represents a TX output power reading of 7.78 dBm.
|
||
The 'txPower' is shown in unit of dBm, and the precision is 0.1.
|
||
When the optical parameter being monitored is 'rxPower',the supported range
|
||
is from -40000 to 8200, in units of 1/1000 dbm.
|
||
Example: A value of 7780 represents a RX received optical power reading of 7.78 dBm.
|
||
The 'rxPower' is shown in unit of dBm, and the precision is 0.1.
|
||
When the optical parameter being monitored is 'XXsupplyVoltage',the supported range
|
||
is from 0 to 6550, in units of 1/1000 V.
|
||
Example: A value of 6000 represents a XX supply Voltage eading of 6.00V.
|
||
The 'XXsupplyVoltage'is shown in unit of V, and the precision is 0.01.
|
||
When the optical parameter being monitored is 'apdBiasVoltage,the supported range
|
||
is from 0 to 655300 , in units of 1/1000 V .
|
||
Example: A value of 600000 represents a APD BiasVoltage reading of 600.0V.
|
||
The 'apdBiasVoltage' is shown in unit of V, and the precision is 0.1.
|
||
When the optical parameter being monitored is 'XXsupplyCurrent',the supported range
|
||
is from 0 to 6553600, in units of 1/1000 mA .
|
||
Example: A value of 6000000 represents a XX supply current reading of 6000.0mA.
|
||
The 'XXsupplyCurrent' is shown in unit of mA, and the precision is 0.1.
|
||
When the optical parameter being monitored is 'tecCurrent',the supported range
|
||
is from 0 to 6553600, in units of 1/1000 mA .
|
||
Example: A value of 6000000 represents a TEC Current reading of 6000.0mA.
|
||
The 'tecCurrent' is shown in unit of mA, and the precision is 0.1.
|
||
When the optical parameter being monitored is 'laserWavelength,the supported range
|
||
is from 0 to 3276750, in units of 1/1000 nm .
|
||
Example: A value of 3000000 represents a laser wavelength reading of 3000.0nm.
|
||
The 'laserWavelength'is shown in unit of nm, and the precision is 0.01.
|
||
"
|
||
SYNTAX Integer32 (-1000000 | -40000..6553600)
|
||
|
||
OpticalPMPeriod ::= TEXTUAL-CONVENTION
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This value indicates the time period over which performance
|
||
monitoring data has been collected."
|
||
SYNTAX INTEGER {
|
||
fifteenMin(1),
|
||
twentyFourHour(2)
|
||
}
|
||
|
||
-- MIB Global Enable Definitions
|
||
|
||
raisecomOpticalTransceiverGlobalEnable OBJECT IDENTIFIER ::=
|
||
{raisecomOpticalTransceiver 1 }
|
||
|
||
raisecomOpticalTransceiverNotifyEnable OBJECT-TYPE
|
||
SYNTAX EnableVar
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This object specifies the generation of device notifications,
|
||
enable or disable.
|
||
|
||
this object belongs to xfp and sfp.
|
||
"
|
||
DEFVAL { disable }
|
||
::={ raisecomOpticalTransceiverGlobalEnable 1 }
|
||
|
||
raisecomOpticalTransceiverDDMEnable OBJECT-TYPE
|
||
SYNTAX EnableVar
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Enable or disable digitaldiagnotic on the device.
|
||
|
||
this object belongs to xfp and sfp.
|
||
"
|
||
DEFVAL { disable}
|
||
::={ raisecomOpticalTransceiverGlobalEnable 2 }
|
||
|
||
raisecomOpticalTransceiverCheckPwdEnable OBJECT-TYPE
|
||
SYNTAX EnableVar
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This object specifies the status of password checking on the device,
|
||
enable or disable.
|
||
|
||
this object belongs to xfp.
|
||
"
|
||
DEFVAL { disable}
|
||
::={ raisecomOpticalTransceiverGlobalEnable 3 }
|
||
|
||
raisecomOpticalTransceiverPollInterval OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This object specifies the value of poll-interval on the device.
|
||
|
||
this object belongs to xfp and sfp.
|
||
"
|
||
::={ raisecomOpticalTransceiverGlobalEnable 4 }
|
||
|
||
-- MIB Object Definitions
|
||
|
||
raisecomOpticalTransceiverObjects OBJECT IDENTIFIER ::=
|
||
{raisecomOpticalTransceiver 2 }
|
||
|
||
-- groups in this MIB module
|
||
raisecomOpticalTransceiverInfoGroup OBJECT IDENTIFIER ::=
|
||
{raisecomOpticalTransceiverObjects 1 }
|
||
|
||
raisecomOpticalTransceiverDDMGroup OBJECT IDENTIFIER ::=
|
||
{raisecomOpticalTransceiverObjects 2 }
|
||
|
||
raisecomOpticalTransceiverPMGroup OBJECT IDENTIFIER ::=
|
||
{raisecomOpticalTransceiverObjects 3 }
|
||
|
||
raisecomOpticalTransceiverStatusGroup OBJECT IDENTIFIER ::=
|
||
{raisecomOpticalTransceiverObjects 4 }
|
||
|
||
-- raisecomOpticalTransceiverInfoTable
|
||
|
||
raisecomOpticalTransceiverInfoTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF RaisecomOpticalTransceiverInfoEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Trancetver information Table."
|
||
::= { raisecomOpticalTransceiverInfoGroup 1 }
|
||
|
||
raisecomOpticalTransceiverInfoEntry OBJECT-TYPE
|
||
SYNTAX RaisecomOpticalTransceiverInfoEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"An entry in the raisecomOpticalTransceiverInfoTable."
|
||
INDEX { ifIndex }
|
||
::={ raisecomOpticalTransceiverInfoTable 1 }
|
||
|
||
|
||
RaisecomOpticalTransceiverInfoEntry ::= SEQUENCE {
|
||
raisecomOpticalTransceiverType INTEGER,
|
||
raisecomOpticalTransceiverConnectorType INTEGER,
|
||
raisecomOpticalTransceiverVendorName OCTET STRING,
|
||
raisecomOpticalTransceiverVendorPN OCTET STRING,
|
||
raisecomOpticalTransceiverVendorSN OCTET STRING,
|
||
raisecomOpticalTransceiverMediaType INTEGER,
|
||
raisecomOpticalTransceiverTransmissionDistance Integer32,
|
||
raisecomOpticalTransceiverAbility Unsigned32,
|
||
raisecomOpticalTransceiverDDM INTEGER,
|
||
raisecomOpticalTransceiverCalibrationType INTEGER,
|
||
raisecomOpticalTransceiverRSSI INTEGER,
|
||
raisecomOpticalTransceiverVendorRev OCTET STRING,
|
||
raisecomOpticalTransceiverBRMax INTEGER,
|
||
raisecomOpticalTransceiverBRMin INTEGER,
|
||
raisecomOpticalTransceiverWavelengthContrl INTEGER,
|
||
raisecomOpticalTransceiverWavelength Integer32,
|
||
raisecomOpticalTransceiverWaveTolerance OCTET STRING,
|
||
raisecomOpticalTransceiverCompatibility OCTET STRING,
|
||
raisecomOpticalTransceiverPowerDissipation INTEGER,
|
||
raisecomOpticalTransceiverCDR INTEGER,
|
||
raisecomOpticalTransceiverRefClock INTEGER,
|
||
raisecomOpticalTransceiverTransmitterType INTEGER,
|
||
raisecomOpticalTransceiverCooled INTEGER,
|
||
raisecomOpticalTransceiverTunalbe INTEGER,
|
||
raisecomOpticalTransceiverDetectorType INTEGER,
|
||
raisecomOpticalTransceiverLineLoopBack INTEGER,
|
||
raisecomOpticalTransceiverXFILoopBack INTEGER,
|
||
raisecomOpticalTransceiverVps INTEGER,
|
||
raisecomOpticalTransceiverTxDis INTEGER,
|
||
raisecomOpticalTransceiverStandby INTEGER,
|
||
raisecomOpticalTransceiverInVpsLowPower INTEGER,
|
||
raisecomOpticalTransceiverOutVpsLowPower INTEGER,
|
||
raisecomOpticalTransceiverFEC INTEGER,
|
||
raisecomOpticalTransceiverCMU INTEGER,
|
||
raisecomOpticalTransceiverBR INTEGER
|
||
|
||
}
|
||
|
||
raisecomOpticalTransceiverType OBJECT-TYPE
|
||
SYNTAX INTEGER{
|
||
unknown(1),
|
||
gbic(2),
|
||
soldered(3),
|
||
sfp(4),
|
||
xbi(5),
|
||
xenpak(6),
|
||
xfp(7),
|
||
xff(8),
|
||
xfp-e(9),
|
||
xpak(10),
|
||
x2(11),
|
||
sfpj(12)
|
||
}
|
||
ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This object specifies the physical type of the transceiver,
|
||
such as xfp or sfp , and so on.
|
||
|
||
this object belongs to xfp and sfp.
|
||
"
|
||
::= { raisecomOpticalTransceiverInfoEntry 1 }
|
||
|
||
raisecomOpticalTransceiverConnectorType OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
{
|
||
unknown(0),
|
||
sc (1),
|
||
db9(2),
|
||
hssdc(3),
|
||
bnc-tnc(4),
|
||
fiber-coaxial-head(5),
|
||
fiber-jack(6),
|
||
lc(7),
|
||
mt-rj(8),
|
||
mu(9),
|
||
sg(10),
|
||
fiber-pigtail(11),
|
||
mpo-parallel-optic(12),
|
||
hssdcII (20),
|
||
copper (21),
|
||
rj45 (22)
|
||
}
|
||
ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This object specifies the connector type of the transceiver£¬
|
||
unknown, sc, db9, hssdc, bnc_tnc, fiber_coaxial_head, fiber_outlet,
|
||
lc, mt_rj, mu, sg, fiber_pigtail, mpo_parallel_optic , hssdcII,
|
||
copper, rj45.
|
||
|
||
this object belongs to xfp and sfp.
|
||
"
|
||
::= { raisecomOpticalTransceiverInfoEntry 2 }
|
||
|
||
raisecomOpticalTransceiverVendorName OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Vendor name of the interface.
|
||
|
||
this object belongs to xfp and sfp.
|
||
"
|
||
::= { raisecomOpticalTransceiverInfoEntry 3 }
|
||
|
||
raisecomOpticalTransceiverVendorPN OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Vendor part number of the interface.
|
||
|
||
this object belongs to xfp and sfp.
|
||
"
|
||
::= { raisecomOpticalTransceiverInfoEntry 4 }
|
||
|
||
raisecomOpticalTransceiverVendorSN OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Vendor serial number of the interface.
|
||
|
||
this object belongs to xfp and sfp.
|
||
"
|
||
::= { raisecomOpticalTransceiverInfoEntry 5 }
|
||
|
||
raisecomOpticalTransceiverMediaType OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
{
|
||
single-mode(1),
|
||
multi-modeE50(2),
|
||
multi-mode50(3),
|
||
multi-mode625(4),
|
||
copper(5),
|
||
single-modeKm(6),
|
||
multi-modeOM3(7)
|
||
}
|
||
ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Types of the fiber,
|
||
single_mode, multi_modeE50, multi_mode50,multi_mode625,copper.
|
||
single_modeKm,multi_modeOM3
|
||
|
||
this object belongs to xfp and sfp.
|
||
"
|
||
::= { raisecomOpticalTransceiverInfoEntry 6 }
|
||
|
||
raisecomOpticalTransceiverTransmissionDistance OBJECT-TYPE
|
||
SYNTAX Integer32
|
||
ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The max distance which the interface could transmit,
|
||
measured in meter.
|
||
The object will be shown in unit of Km, and the precision is 0.001.
|
||
|
||
this object belongs to xfp and sfp.
|
||
"
|
||
::= { raisecomOpticalTransceiverInfoEntry 7 }
|
||
|
||
raisecomOpticalTransceiverAbility OBJECT-TYPE
|
||
SYNTAX Unsigned32
|
||
ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This object specifies the ability of optical module digitaldiagnotic
|
||
funtion. Currently, the digitaldiagnotic objects of our optical module
|
||
inculde 16 parameters.
|
||
|
||
this object has 32 bits, each bit represents a digital diagnotic parameter.
|
||
if the bit value is 0, it means that the optical module does not provide
|
||
digital diagnotic funtion for relative parameter.if the bit value is 1,it
|
||
means that the optical module provides digital diagnotic funtion for
|
||
relative parameter.
|
||
|
||
this object belongs to xfp and sfp.
|
||
|
||
The relation between parameters and bits is following:
|
||
32¡¡16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1:
|
||
The relation between parameters and bits is following:
|
||
32¡¡16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1:
|
||
| 1bit | 2bit | 3bit | 4bit
|
||
| APDÆ«Öõçѹ | 0£¨±£Áô£© | TECµçÁ÷ | ¼¤¹âÆ÷ζÈ
|
||
|
||
| 5bit | 6bit |7bit | 8bit
|
||
| ¼¤¹âÆ÷²¨³¤ | +5V¹©µçµçѹ | +3.3V¹©µçµçѹ | +1.8V¹©µçµçѹ
|
||
|
||
| 9bit | 10bit |11bit | 12bit
|
||
| -5.2V¹©µçµçѹ | +5V¹©µçµçÁ÷ | 0£¨ÎÞ£© | 0£¨ÎÞ£©
|
||
|
||
| 13bit | 14bit | 15bit | 16bit
|
||
| +3.3V¹©µçµçÁ÷ | +1.8V¹©µçµçÁ÷ | -5.2V¹©µçµçÁ÷ | Ä£¿éζÈ
|
||
|
||
| 17bit | 18bit | 19bit | 20bit ~ 32bit
|
||
| ¼¤¹âÆ÷Æ«ÖõçÁ÷ | ·¢Ë͹⹦ÂÊ |½ÓÊչ⹦ÂÊ | 0
|
||
|
||
But when the optical module is sfp, the 6 bit will represents
|
||
the supplyVoltage of sfp.
|
||
"
|
||
::= { raisecomOpticalTransceiverInfoEntry 8 }
|
||
|
||
raisecomOpticalTransceiverDDM OBJECT-TYPE
|
||
SYNTAX INTEGER{
|
||
support(1),
|
||
notsupport(2)
|
||
}
|
||
ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This object specifies if the transceiver supports on digital diagnostic function,
|
||
support or not support.To the xfp, the default value of this object is support.
|
||
|
||
this object belongs to xfp and sfp.
|
||
"
|
||
::= { raisecomOpticalTransceiverInfoEntry 9 }
|
||
|
||
raisecomOpticalTransceiverCalibrationType OBJECT-TYPE
|
||
SYNTAX INTEGER{
|
||
unknown(1),
|
||
internal(2),
|
||
external(3)
|
||
}
|
||
ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This object specifies the calibration type of the transceiver,
|
||
internal, external, unknown.
|
||
|
||
this object belongs to xfp and sfp.
|
||
"
|
||
::= { raisecomOpticalTransceiverInfoEntry 10 }
|
||
|
||
raisecomOpticalTransceiverRSSI OBJECT-TYPE
|
||
SYNTAX INTEGER{
|
||
support(1),
|
||
notsupport(2)
|
||
}
|
||
ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This object specifies the calibration type of the transceiver,
|
||
support or not support.
|
||
|
||
this object belongs to xfp and sfp.
|
||
"
|
||
::= { raisecomOpticalTransceiverInfoEntry 11 }
|
||
|
||
raisecomOpticalTransceiverVendorRev OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
" the version number of the transceiver.
|
||
this object belongs to xfp and sfp.
|
||
"
|
||
::= { raisecomOpticalTransceiverInfoEntry 12 }
|
||
|
||
raisecomOpticalTransceiverBRMax OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
" the min data rate of the transceiver,mesured in Mbps .
|
||
this object belongs to xfp and sfp.
|
||
|
||
The object will be shown in unit of Gbps, and the precision is 0.1.
|
||
"
|
||
::= { raisecomOpticalTransceiverInfoEntry 13 }
|
||
|
||
raisecomOpticalTransceiverBRMin OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
" the min data rate of the transceiver,mesured in Mbps.
|
||
|
||
this object belongs to xfp and sfp.To the sfp,
|
||
the min data rate value is equal to the max data rate value.
|
||
|
||
The object will be shown in unit of Gbps, and the precision is 0.1.
|
||
"
|
||
::= { raisecomOpticalTransceiverInfoEntry 14 }
|
||
|
||
raisecomOpticalTransceiverWavelengthContrl OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
{
|
||
support(1),
|
||
notsupport (2)
|
||
}
|
||
ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"if the transceiver supports on wavelength control
|
||
support,notsupport.
|
||
this object belongs to xfp.
|
||
"
|
||
::= { raisecomOpticalTransceiverInfoEntry 15 }
|
||
|
||
raisecomOpticalTransceiverWavelength OBJECT-TYPE
|
||
SYNTAX Integer32
|
||
ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Wavelength of the interface, measured in pm(0.001nm).
|
||
this object belongs to xfp.
|
||
The object will be shown in unit of nm, and the precision is 0.01.
|
||
"
|
||
::= { raisecomOpticalTransceiverInfoEntry 16 }
|
||
|
||
raisecomOpticalTransceiverWaveTolerance OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"the range of laser wavelength from nominal wavelength,mesured in pm(0.001*nm).
|
||
this object belongs to xfp.
|
||
The object will be shown in unit of nm, and the precision is 0.01.
|
||
"
|
||
::= { raisecomOpticalTransceiverInfoEntry 17 }
|
||
|
||
raisecomOpticalTransceiverCompatibility OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"the compatibility type that the transceiver supports,such as 10GBASE-SR.
|
||
this object belongs to xfp.
|
||
"
|
||
::= { raisecomOpticalTransceiverInfoEntry 18 }
|
||
|
||
raisecomOpticalTransceiverPowerDissipation OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
{
|
||
p1W5(1),
|
||
p2W5(2),
|
||
p3W5(3),
|
||
exceed(4)
|
||
}
|
||
ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"the max power dissipation of the transceiver,
|
||
p1W5,p2W5,p3W5,exceed3W5.
|
||
this object belongs to xfp.
|
||
"
|
||
::= { raisecomOpticalTransceiverInfoEntry 19 }
|
||
|
||
raisecomOpticalTransceiverCDR OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
{
|
||
support(1),
|
||
notsupport(2)
|
||
}
|
||
ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"the optical module supports on CDR fundtion.
|
||
support,notsupport.
|
||
this object belongs to xfp.
|
||
"
|
||
::= { raisecomOpticalTransceiverInfoEntry 20 }
|
||
|
||
raisecomOpticalTransceiverRefClock OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
{
|
||
required(1),
|
||
notrequired (2)
|
||
}
|
||
ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
" if the transceiver requires outside reference clock
|
||
required,notrequired.
|
||
this object belongs to xfp.
|
||
"
|
||
::= { raisecomOpticalTransceiverInfoEntry 21 }
|
||
|
||
raisecomOpticalTransceiverTransmitterType OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
{
|
||
vcsel850nm(1),
|
||
vcsel1310nm(2),
|
||
vcsel1550nm(3),
|
||
fp1310nm(4),
|
||
dfb1310nm(5),
|
||
dfb1550nm(6),
|
||
eml1310nm(7),
|
||
eml1550nm(8),
|
||
copper-others(9)
|
||
}
|
||
|
||
ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The transmitter type of the transceiver,such as 850 nm VCSEL.
|
||
this object belongs to xfp.
|
||
"
|
||
::= { raisecomOpticalTransceiverInfoEntry 22 }
|
||
|
||
raisecomOpticalTransceiverCooled OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
{
|
||
cooled(1),
|
||
uncooled (2)
|
||
}
|
||
ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The transmitter cooled type of the transceiver
|
||
cooled,uncooled.
|
||
this object belongs to xfp.
|
||
"
|
||
::= { raisecomOpticalTransceiverInfoEntry 24 }
|
||
|
||
raisecomOpticalTransceiverTunalbe OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
{
|
||
tunable (1),
|
||
untunable (2)
|
||
}
|
||
ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The transmitter tunable type of the transceiver
|
||
tunable,untunable.
|
||
this object belongs to xfp.
|
||
"
|
||
::= { raisecomOpticalTransceiverInfoEntry 25 }
|
||
|
||
raisecomOpticalTransceiverDetectorType OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
{
|
||
pin(1),
|
||
apd(2)
|
||
}
|
||
ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The detector type of the transceiver
|
||
pin, apd.
|
||
this object belongs to xfp.
|
||
"
|
||
::= { raisecomOpticalTransceiverInfoEntry 26 }
|
||
|
||
raisecomOpticalTransceiverLineLoopBack OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
{
|
||
support(1),
|
||
notsupport(2)
|
||
}
|
||
ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The transceiver support status of sideline loop-back control
|
||
support,notsupport.
|
||
this object belongs to xfp.
|
||
"
|
||
::= { raisecomOpticalTransceiverInfoEntry 27 }
|
||
|
||
raisecomOpticalTransceiverXFILoopBack OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
{
|
||
support(1),
|
||
notsupport(2)
|
||
}
|
||
ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The transceiver support status of XFI loop-back control
|
||
support,notsupport.
|
||
this object belongs to xfp.
|
||
"
|
||
::= { raisecomOpticalTransceiverInfoEntry 28 }
|
||
|
||
raisecomOpticalTransceiverVps OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
{
|
||
support(1),
|
||
notsupport(2)
|
||
}
|
||
ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This object specifies if the optical module supports on VPS
|
||
support,notsupport.
|
||
this object belongs to xfp.
|
||
"
|
||
::= { raisecomOpticalTransceiverInfoEntry 29 }
|
||
|
||
raisecomOpticalTransceiverTxDis OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
{
|
||
support(1),
|
||
notsupport(2)
|
||
}
|
||
ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The transceiver support status of software control the transmitter status
|
||
support,notsupport.
|
||
this object belongs to xfp.
|
||
"
|
||
::= { raisecomOpticalTransceiverInfoEntry 30 }
|
||
|
||
raisecomOpticalTransceiverStandby OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
{
|
||
support(1),
|
||
notsupport(2)
|
||
}
|
||
ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The transceiver support status of software control the standby mode.
|
||
support,notsupport.
|
||
this object belongs to xfp.
|
||
"
|
||
::= { raisecomOpticalTransceiverInfoEntry 31 }
|
||
|
||
raisecomOpticalTransceiverInVpsLowPower OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
{
|
||
support(1),
|
||
notsupport(2)
|
||
}
|
||
ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The VPS in low power support status of the transceiver
|
||
support,notsupport.
|
||
this object belongs to xfp.
|
||
"
|
||
::= { raisecomOpticalTransceiverInfoEntry 32 }
|
||
|
||
raisecomOpticalTransceiverOutVpsLowPower OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
{
|
||
support(1),
|
||
notsupport(2)
|
||
}
|
||
ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The VPS out low power support status of the transceiver
|
||
support,notsupport.
|
||
this object belongs to xfp.
|
||
"
|
||
::= { raisecomOpticalTransceiverInfoEntry 33 }
|
||
|
||
raisecomOpticalTransceiverFEC OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
{
|
||
support(1),
|
||
notsupport(2)
|
||
}
|
||
ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The FEC support status of transceiver
|
||
support,notsupport.
|
||
this object belongs to xfp.
|
||
"
|
||
::= { raisecomOpticalTransceiverInfoEntry 34 }
|
||
|
||
raisecomOpticalTransceiverCMU OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
{
|
||
support(1),
|
||
notsupport(2)
|
||
}
|
||
ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The CMU support status of transceiver
|
||
support,notsupport.
|
||
this object belongs to xfp.
|
||
"
|
||
::= { raisecomOpticalTransceiverInfoEntry 35 }
|
||
|
||
raisecomOpticalTransceiverBR OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
{
|
||
unknown(0),
|
||
bitrate-125Mbps(1),
|
||
bitrate-155Mbps (2),
|
||
bitrate-622Mbps(6),
|
||
bitrate-1DOT25Gbps(13),
|
||
bitrate-2DOT5Gbps(19)
|
||
}
|
||
ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This object specifies the Nominal bitrate of the transceiver£¬
|
||
125Mbps, 155Mbps, 622Mbps, 1.25Gbps, 2.5Gbps.
|
||
|
||
this object belongs to xfp and sfp.
|
||
"
|
||
::= { raisecomOpticalTransceiverInfoEntry 36 }
|
||
|
||
-- raisecomOpticalDDMTable
|
||
|
||
raisecomOpticalTransceiverDDMTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF RaisecomOpticalTransceiverDDMEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This table provides objects to monitor optical
|
||
parameters in a network element. "
|
||
::={ raisecomOpticalTransceiverDDMGroup 1 }
|
||
|
||
raisecomOpticalTransceiverDDMEntry OBJECT-TYPE
|
||
SYNTAX RaisecomOpticalTransceiverDDMEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"An entry in the raisecomOpticalTransceiverMonTable provides objects to
|
||
monitor an optical parameter at an optical interface.
|
||
"
|
||
INDEX { ifIndex,
|
||
raisecomOpticalTransceiverParameterType
|
||
}
|
||
::={ raisecomOpticalTransceiverDDMTable 1 }
|
||
|
||
RaisecomOpticalTransceiverDDMEntry ::= SEQUENCE {
|
||
raisecomOpticalTransceiverParameterType OpticalParameterType,
|
||
raisecomOpticalTransceiverParameterValue OpticalParameterValue,
|
||
raisecomOpticalTransceiverParamHighAlarmThresh OpticalParameterValue,
|
||
raisecomOpticalTransceiverParamHighWarningThresh OpticalParameterValue,
|
||
raisecomOpticalTransceiverParamLowAlarmThresh OpticalParameterValue,
|
||
raisecomOpticalTransceiverParamLowWarningThresh OpticalParameterValue,
|
||
raisecomOpticalTransceiverParamAlarmStatus INTEGER,
|
||
raisecomOpticalTransceiverParamAlarmLastValue OpticalParameterValue,
|
||
raisecomOpticalTransceiverParamAlarmLastChange TimeTicks,
|
||
raisecomOpticalTransceiverDDM15MinValidIntervals Unsigned32,
|
||
raisecomOpticalTransceiverDDM24HrValidIntervals Unsigned32,
|
||
raisecomOpticalTransceiverDDMValidStatus INTEGER
|
||
}
|
||
|
||
raisecomOpticalTransceiverParameterType OBJECT-TYPE
|
||
SYNTAX OpticalParameterType
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This object specifies the optical parameter that is being
|
||
monitored in this entry.
|
||
This object belongs to xfp/sfp.
|
||
"
|
||
::={ raisecomOpticalTransceiverDDMEntry 1 }
|
||
|
||
raisecomOpticalTransceiverParameterValue OBJECT-TYPE
|
||
SYNTAX OpticalParameterValue
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This object gives the value measured for the particular
|
||
optical parameter specified by the raisecomOpticalMonParameterType
|
||
object.
|
||
This object belongs to xfp/sfp.
|
||
"
|
||
::={ raisecomOpticalTransceiverDDMEntry 2 }
|
||
|
||
raisecomOpticalTransceiverParamHighAlarmThresh OBJECT-TYPE
|
||
SYNTAX OpticalParameterValue
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This object gives the high alarm threshold on the
|
||
optical parameter being monitored.
|
||
|
||
An alarm condition will be raised if the value given by
|
||
raisecomOpticalParameterValue goes from below the value of
|
||
this object to above the value of this object, or if
|
||
the initial value of raisecomOpticalParameterValue exceeds the value
|
||
of this object. This alarm will be indicated in the
|
||
raisecomOpticalParamAlarmStatus object.
|
||
This object belongs to xfp/sfp.
|
||
"
|
||
::={ raisecomOpticalTransceiverDDMEntry 3 }
|
||
|
||
raisecomOpticalTransceiverParamHighWarningThresh OBJECT-TYPE
|
||
SYNTAX OpticalParameterValue
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This object is used to set a high warning threshold on
|
||
the optical parameter being monitored.
|
||
|
||
A threshold crossing condition will be indicated if the value
|
||
given by raisecomOpticalParameterValue goes from below the value
|
||
of this object to above the value of this
|
||
object, or if the initial value of raisecomOpticalParameterValue
|
||
exceeds the value of this object. This alarm will be indicated in the
|
||
raisecomOpticalParamAlarmStatus object.
|
||
This object belongs to xfp/sfp.
|
||
"
|
||
::={ raisecomOpticalTransceiverDDMEntry 4 }
|
||
|
||
raisecomOpticalTransceiverParamLowAlarmThresh OBJECT-TYPE
|
||
SYNTAX OpticalParameterValue
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This object is used to set a low alarm threshold on the
|
||
optical parameter being monitored.
|
||
|
||
An alarm condition will be raised if the value given by
|
||
raisecomOpticalParameterValue goes from above the value of
|
||
this object to below the value of this object, or if
|
||
the initial value of raisecomOpticalParameterValue is lower than the
|
||
value of this object. This alarm
|
||
will be indicated in the raisecomOpticalParamAlarmStatus object ..
|
||
This object belongs to xfp/sfp.
|
||
"
|
||
::={ raisecomOpticalTransceiverDDMEntry 5 }
|
||
|
||
raisecomOpticalTransceiverParamLowWarningThresh OBJECT-TYPE
|
||
SYNTAX OpticalParameterValue
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This object is used to set a low warning threshold on
|
||
the optical parameter being monitored.
|
||
|
||
A threshold crossing condition will be indicated if the value
|
||
given by raisecomOpticalParameterValue goes from above the value
|
||
of this object to below the value of this
|
||
object, or if the initial value of raisecomOpticalParameterValue
|
||
object is lower than the value of this object. For
|
||
network elements in the status
|
||
indications, this threshold violation will be indicated in the
|
||
raisecomOpticalParamAlarmStatus object .
|
||
This object belongs to xfp/sfp.
|
||
"
|
||
::={ raisecomOpticalTransceiverDDMEntry 6 }
|
||
|
||
raisecomOpticalTransceiverParamAlarmStatus OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
unknown(0),
|
||
normal(1),
|
||
high-alarm(2),
|
||
high-warning(3),
|
||
low-alarm(4),
|
||
low-warning(5)
|
||
}
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This object is used to indicate the current status of
|
||
the thresholds for the monitored optical parameter
|
||
on the interface.
|
||
|
||
If a threshold is currently being exceeded on the
|
||
interface, the object will be set. Otherwise,
|
||
the object will be set to 1.
|
||
This object belongs to xfp/sfp.
|
||
"
|
||
::={ raisecomOpticalTransceiverDDMEntry 7 }
|
||
|
||
raisecomOpticalTransceiverParamAlarmLastValue OBJECT-TYPE
|
||
SYNTAX OpticalParameterValue
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This object indicates the optical parameter value at the last time
|
||
a threshold related to a particular optical parameter was
|
||
exceeded on the interface.
|
||
If no threshold value is currently being
|
||
exceeded, then the value '-1000000' is returned.
|
||
|
||
This object belongs to xfp/sfp.
|
||
"
|
||
::={ raisecomOpticalTransceiverDDMEntry 8 }
|
||
|
||
raisecomOpticalTransceiverParamAlarmLastChange OBJECT-TYPE
|
||
SYNTAX TimeTicks
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This object specifies the value of sysUpTime at the last time
|
||
a threshold related to a particular optical parameter was
|
||
exceeded on the interface.
|
||
|
||
This object belongs to xfp/sfp.
|
||
"
|
||
::={ raisecomOpticalTransceiverDDMEntry 9 }
|
||
|
||
raisecomOpticalTransceiverDDM15MinValidIntervals OBJECT-TYPE
|
||
SYNTAX Unsigned32 (0..96)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This object gives the number of previous 15 minute
|
||
intervals for which valid performance monitoring data
|
||
has been stored on the interface.
|
||
|
||
The value of this object will be n (where n is the maximum
|
||
number of 15 minute intervals supported at this interface),
|
||
unless the measurement was (re-)started within the last
|
||
(nx15) minutes, in which case the value will be the
|
||
number of previous 15 minute intervals for which the agent
|
||
has some data.
|
||
|
||
This object belongs to xfp/sfp.
|
||
"
|
||
::={ raisecomOpticalTransceiverDDMEntry 10 }
|
||
|
||
raisecomOpticalTransceiverDDM24HrValidIntervals OBJECT-TYPE
|
||
SYNTAX Unsigned32 (0..7)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This object gives the number of previous 24 hour intervals
|
||
for which valid performance monitoring data has been stored
|
||
on the interface. The max value of this object is 7, it
|
||
means that the user can look up 7days history information.
|
||
This object belongs to xfp/sfp.
|
||
"
|
||
::={ raisecomOpticalTransceiverDDMEntry 11 }
|
||
|
||
raisecomOpticalTransceiverDDMValidStatus OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
unknown(0),
|
||
valid(1),
|
||
invalid(2)
|
||
}
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This object indicates the parameter row is valid or invalid.
|
||
The object value is 'valide' when the module is present and
|
||
supporting digitaldiagnotic. The object value is 'invalid'
|
||
when the module is absent, or when the module is present and
|
||
not supporting digitaldiagnotic.
|
||
This object belongs to xfp/sfp.
|
||
"
|
||
::={ raisecomOpticalTransceiverDDMEntry 12 }
|
||
|
||
-- raisecomOpticalTransceiverPMCurrent Table
|
||
raisecomOpticalTransceiverPMCurrentTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF RaisecomOpticalTransceiverPMCurrentEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This table contains performance monitoring data for the
|
||
various optical parameters, collected over the current 15
|
||
minute or the current 24 hour interval."
|
||
::={ raisecomOpticalTransceiverPMGroup 1 }
|
||
|
||
raisecomOpticalTransceiverPMCurrentEntry OBJECT-TYPE
|
||
SYNTAX RaisecomOpticalTransceiverPMCurrentEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"An entry in the raisecomOpticalTransceiverPMCurrentTable. It contains
|
||
performance monitoring data for a monitored optical
|
||
parameter at an interface, collected over the current 15
|
||
minute or the current 24 hour interval.
|
||
"
|
||
INDEX { ifIndex,
|
||
raisecomOpticalTransceiverPMCurrentPeriod,
|
||
raisecomOpticalTransceiverPMCurrentParamType }
|
||
::={ raisecomOpticalTransceiverPMCurrentTable 1 }
|
||
|
||
RaisecomOpticalTransceiverPMCurrentEntry ::= SEQUENCE {
|
||
raisecomOpticalTransceiverPMCurrentPeriod OpticalPMPeriod,
|
||
raisecomOpticalTransceiverPMCurrentParamType OpticalParameterType,
|
||
raisecomOpticalTransceiverPMCurrentMaxParam OpticalParameterValue,
|
||
raisecomOpticalTransceiverPMCurrentMinParam OpticalParameterValue,
|
||
raisecomOpticalTransceiverPMCurrentMeanParam OpticalParameterValue
|
||
}
|
||
|
||
raisecomOpticalTransceiverPMCurrentPeriod OBJECT-TYPE
|
||
SYNTAX OpticalPMPeriod
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This object indicates whether the optical parameter values
|
||
given in this entry are collected over the current 15 minute or
|
||
the current 24 hour interval.
|
||
This object belongs to xfp/sfp.
|
||
"
|
||
::={ raisecomOpticalTransceiverPMCurrentEntry 1 }
|
||
|
||
raisecomOpticalTransceiverPMCurrentParamType OBJECT-TYPE
|
||
SYNTAX OpticalParameterType
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This object specifies the optical parameter that is being
|
||
monitored, in this entry.
|
||
This object belongs to xfp/sfp.
|
||
"
|
||
::={ raisecomOpticalTransceiverPMCurrentEntry 2 }
|
||
|
||
raisecomOpticalTransceiverPMCurrentMaxParam OBJECT-TYPE
|
||
SYNTAX OpticalParameterValue
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This object gives the maximum value measured for the monitored
|
||
optical parameter, in the current 15 minute or the current
|
||
24 hour interval.
|
||
This object belongs to xfp/sfp.
|
||
"
|
||
::={ raisecomOpticalTransceiverPMCurrentEntry 3 }
|
||
|
||
raisecomOpticalTransceiverPMCurrentMinParam OBJECT-TYPE
|
||
SYNTAX OpticalParameterValue
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This object gives the minimum value measured for the monitored
|
||
optical parameter, in the current 15 minute or the current
|
||
24 hour interval.
|
||
This object belongs to xfp/sfp.
|
||
"
|
||
::={ raisecomOpticalTransceiverPMCurrentEntry 4 }
|
||
|
||
raisecomOpticalTransceiverPMCurrentMeanParam OBJECT-TYPE
|
||
SYNTAX OpticalParameterValue
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This object gives the average value of the monitored
|
||
optical parameter, in the current 15 minute or the current
|
||
24 hour interval.
|
||
This object belongs to xfp/sfp.
|
||
"
|
||
::={ raisecomOpticalTransceiverPMCurrentEntry 5 }
|
||
|
||
-- raisecomOpticalTransceiverPMInterval Table
|
||
|
||
raisecomOpticalTransceiverPMIntervalTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF RaisecomOpticalTransceiverPMIntervalEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This table stores performance monitoring data for the
|
||
various optical parameters, collected over previous
|
||
intervals.
|
||
|
||
This table can have entries for one complete 24 hour
|
||
interval and up to 96 complete 15 minute
|
||
intervals. A system is required to store at least
|
||
4 completed 15 minute intervals. The number of valid
|
||
15 minute intervals in this table is indicated by the
|
||
raisecomOpticalTransceiverDDM15MinValidIntervals object
|
||
and the number of valid 24 hour intervals is indicated by the
|
||
raisecomOpticalTransceiverDDM24HrValidIntervals object.
|
||
|
||
when the optical module is removed from the device, the relative
|
||
history records will be cleaned.
|
||
"
|
||
::={ raisecomOpticalTransceiverPMGroup 2 }
|
||
|
||
raisecomOpticalTransceiverPMIntervalEntry OBJECT-TYPE
|
||
SYNTAX RaisecomOpticalTransceiverPMIntervalEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"An entry in the raisecomOpticalTransceiverPMIntervalTable. It contains
|
||
performance monitoring data for an optical parameter,
|
||
collected over a previous interval.
|
||
"
|
||
INDEX { ifIndex,
|
||
raisecomOpticalTransceiverPMIntervalPeriod,
|
||
raisecomOpticalTransceiverPMIntervalNumber,
|
||
raisecomOpticalTransceiverPMIntervalParamType }
|
||
::={ raisecomOpticalTransceiverPMIntervalTable 1 }
|
||
|
||
RaisecomOpticalTransceiverPMIntervalEntry ::= SEQUENCE {
|
||
raisecomOpticalTransceiverPMIntervalPeriod OpticalPMPeriod,
|
||
raisecomOpticalTransceiverPMIntervalNumber Integer32,
|
||
raisecomOpticalTransceiverPMIntervalParamType OpticalParameterType,
|
||
raisecomOpticalTransceiverPMIntervalMaxParam OpticalParameterValue,
|
||
raisecomOpticalTransceiverPMIntervalMinParam OpticalParameterValue,
|
||
raisecomOpticalTransceiverPMIntervalMeanParam OpticalParameterValue
|
||
}
|
||
|
||
raisecomOpticalTransceiverPMIntervalPeriod OBJECT-TYPE
|
||
SYNTAX OpticalPMPeriod
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This object indicates whether the optical parameter values,
|
||
given in this entry, are collected over a period of 15 minutes
|
||
or 24 hours.
|
||
This object belongs to xfp/sfp.
|
||
"
|
||
::={ raisecomOpticalTransceiverPMIntervalEntry 1 }
|
||
|
||
raisecomOpticalTransceiverPMIntervalNumber OBJECT-TYPE
|
||
SYNTAX Integer32 (1..96)
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"A number between 1 and 96, which identifies the
|
||
interval for which the set of optical parameter values is
|
||
available. The interval identified by 1 is the most recently
|
||
completed 15 minute or 24 hour interval, and the interval
|
||
identified by N is the interval immediately preceding the one
|
||
identified by N-1.
|
||
This object belongs to xfp/sfp.
|
||
"
|
||
::={ raisecomOpticalTransceiverPMIntervalEntry 2 }
|
||
|
||
raisecomOpticalTransceiverPMIntervalParamType OBJECT-TYPE
|
||
SYNTAX OpticalParameterType
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This object specifies the optical parameter that is being
|
||
monitored, in this entry.
|
||
This object belongs to xfp/sfp.
|
||
"
|
||
::={ raisecomOpticalTransceiverPMIntervalEntry 3 }
|
||
|
||
raisecomOpticalTransceiverPMIntervalMaxParam OBJECT-TYPE
|
||
SYNTAX OpticalParameterValue
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This object gives the maximum value measured for the optical
|
||
parameter, in a particular 15 minute or 24 hour interval.
|
||
This object belongs to xfp/sfp.
|
||
"
|
||
::={ raisecomOpticalTransceiverPMIntervalEntry 4 }
|
||
|
||
raisecomOpticalTransceiverPMIntervalMinParam OBJECT-TYPE
|
||
SYNTAX OpticalParameterValue
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This object gives the minimum value measured for the optical
|
||
parameter, in a particular 15 minute or 24 hour interval.
|
||
This object belongs to xfp/sfp.
|
||
"
|
||
::={ raisecomOpticalTransceiverPMIntervalEntry 5 }
|
||
|
||
raisecomOpticalTransceiverPMIntervalMeanParam OBJECT-TYPE
|
||
SYNTAX OpticalParameterValue
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This object gives the average value of the measured optical
|
||
parameter, in a particular 15 minute or 24 hour interval.
|
||
This object belongs to xfp/sfp.
|
||
"
|
||
::={ raisecomOpticalTransceiverPMIntervalEntry 6 }
|
||
|
||
-- raisecomOpticalTransceiverCurrentStatus Table
|
||
raisecomOpticalTransceiverCurrentStatusTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF RaisecomOpticalTransceiverCurrentStatusEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This table stores the hard ware information and the information
|
||
set by user of the transceiver.
|
||
This object belongs to xfp/sfp.
|
||
"
|
||
::={ raisecomOpticalTransceiverStatusGroup 1 }
|
||
|
||
raisecomOpticalTransceiverCurrentStatusEntry OBJECT-TYPE
|
||
SYNTAX RaisecomOpticalTransceiverCurrentStatusEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"An entry in the raisecomOpticalTransceiverCurrentStatusTable. It contains
|
||
performance monitoring data for an optical parameter,
|
||
collected over a previous interval.
|
||
This object belongs to xfp/sfp.
|
||
"
|
||
INDEX { ifIndex }
|
||
::={ raisecomOpticalTransceiverCurrentStatusTable 1 }
|
||
|
||
RaisecomOpticalTransceiverCurrentStatusEntry ::= SEQUENCE {
|
||
raisecomOpticalTransceiverHwInfoAbsStatus INTEGER,
|
||
raisecomOpticalTransceiverHwInfoNRStatus INTEGER,
|
||
raisecomOpticalTransceiverHwInfoRxLosStatus INTEGER,
|
||
raisecomOpticalTransceiverHwInfoStandby INTEGER,
|
||
raisecomOpticalTransceiverHwInfoLaser INTEGER,
|
||
raisecomOpticalTransceiverWaveLengthError Integer32,
|
||
raisecomOpticalTransceiverUserWaveLength Integer32,
|
||
raisecomOpticalTransceiverUserDataRate INTEGER,
|
||
raisecomOpticalTransceiverUserLineLoopBack INTEGER,
|
||
raisecomOpticalTransceiverUserXFILoopBack INTEGER,
|
||
raisecomOpticalTransceiverPortNotifyEnable EnableVar,
|
||
raisecomOpticalTransceiverPortDDMEnable EnableVar,
|
||
raisecomOpticalTransceiverPortCheckPwdEnable EnableVar,
|
||
raisecomOpticalTransceiverTxFaultCount Integer32,
|
||
raisecomOpticalTransceiverTxFaultCountClear ClearVar,
|
||
raisecomOpticalTransceiverSpecificationCheckStatus INTEGER,
|
||
raisecomOpticalTransceiverTxFaultStatus INTEGER
|
||
}
|
||
|
||
raisecomOpticalTransceiverHwInfoAbsStatus OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
{
|
||
absent(1),
|
||
present(2)
|
||
}
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This object specifies if the optical module is absent
|
||
present,absent.
|
||
This object belongs to xfp and sfp."
|
||
::={ raisecomOpticalTransceiverCurrentStatusEntry 1 }
|
||
|
||
raisecomOpticalTransceiverHwInfoNRStatus OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
{
|
||
ready(1),
|
||
notready(2)
|
||
}
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This object specifies if the optical module is ready for operation.
|
||
ready,notready.
|
||
This object belongs to xfp.
|
||
"
|
||
::={ raisecomOpticalTransceiverCurrentStatusEntry 2 }
|
||
|
||
raisecomOpticalTransceiverHwInfoRxLosStatus OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
{
|
||
normal(1),
|
||
loss(2)
|
||
}
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This object specifies if the optical module operation losses the receiving signal
|
||
normal,loss.
|
||
This object belongs to xfp.
|
||
"
|
||
::={ raisecomOpticalTransceiverCurrentStatusEntry 3 }
|
||
|
||
raisecomOpticalTransceiverHwInfoStandby OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
{
|
||
normal(1),
|
||
standby(2)
|
||
}
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This object specifies if the optical module works under standby mode.
|
||
normal,standby.
|
||
This object belongs to xfp.
|
||
"
|
||
::={ raisecomOpticalTransceiverCurrentStatusEntry 4 }
|
||
|
||
raisecomOpticalTransceiverHwInfoLaser OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
{
|
||
on(1),
|
||
off(2)
|
||
}
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This object specifies if the optical module laser is turned on
|
||
on,off.
|
||
This object belongs to xfp.
|
||
"
|
||
::={ raisecomOpticalTransceiverCurrentStatusEntry 5 }
|
||
|
||
raisecomOpticalTransceiverWaveLengthError OBJECT-TYPE
|
||
SYNTAX Integer32
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This object specifies error between the actual wavelength
|
||
and the wavelength set by the user,measured in pm.
|
||
This object belongs to xfp.
|
||
The object will be shown in unit of nm, and the precision is 0.001.
|
||
"
|
||
::={ raisecomOpticalTransceiverCurrentStatusEntry 6 }
|
||
|
||
raisecomOpticalTransceiverUserWaveLength OBJECT-TYPE
|
||
SYNTAX Integer32(0..3276800)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This object specifies the wavelength value of the optical module set by user,measured in pm.
|
||
This object belongs to xfp.
|
||
The object will be shown in unit of nm, and the precision is 0.01.
|
||
"
|
||
::={ raisecomOpticalTransceiverCurrentStatusEntry 7 }
|
||
|
||
|
||
raisecomOpticalTransceiverUserDataRate OBJECT-TYPE
|
||
SYNTAX INTEGER(9500..12500)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This object specifies the data rate of the optical module set by user,measured in Mbps.
|
||
This object belongs to xfp.
|
||
The object will be shown in unit of Gbps, and the precision is 0.1.
|
||
"
|
||
::={ raisecomOpticalTransceiverCurrentStatusEntry 8 }
|
||
|
||
raisecomOpticalTransceiverUserLineLoopBack OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
{
|
||
normal(1),
|
||
lineLoopback(2)
|
||
}
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This object specifies if the sideline loop-back is tuned on ,
|
||
user can change the loop back mode through the object.
|
||
normal,lineLoopback.
|
||
This object belongs to xfp.
|
||
"
|
||
::={ raisecomOpticalTransceiverCurrentStatusEntry 9 }
|
||
|
||
raisecomOpticalTransceiverUserXFILoopBack OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
{
|
||
normal(1),
|
||
xfiLoopback(2)
|
||
}
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This object specifies if the XFI loop-back is tuned on
|
||
user can change the loop back mode through the object.
|
||
normal,xfiLoopback.
|
||
This object belongs to xfp.
|
||
"
|
||
::={ raisecomOpticalTransceiverCurrentStatusEntry 10 }
|
||
|
||
raisecomOpticalTransceiverPortNotifyEnable OBJECT-TYPE
|
||
SYNTAX EnableVar
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This object specifies the generation of a port notifications,
|
||
enable or disable.
|
||
This object belongs to xfp and sfp.
|
||
"
|
||
DEFVAL { enable}
|
||
::={ raisecomOpticalTransceiverCurrentStatusEntry 11 }
|
||
|
||
raisecomOpticalTransceiverPortDDMEnable OBJECT-TYPE
|
||
SYNTAX EnableVar
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This object specifies the status of digitaldiagnotic on a port,
|
||
enable or disable.
|
||
This object belongs to xfp and sfp.
|
||
"
|
||
DEFVAL { enable}
|
||
::={ raisecomOpticalTransceiverCurrentStatusEntry 12 }
|
||
|
||
raisecomOpticalTransceiverPortCheckPwdEnable OBJECT-TYPE
|
||
SYNTAX EnableVar
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This object specifies the status of password checking on a port,
|
||
enable or disable.
|
||
This object belongs to xfp.
|
||
"
|
||
DEFVAL { enable}
|
||
::={ raisecomOpticalTransceiverCurrentStatusEntry 13 }
|
||
|
||
raisecomOpticalTransceiverTxFaultCount OBJECT-TYPE
|
||
SYNTAX Integer32
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This object specifies the number of tx-fault signals."
|
||
::={ raisecomOpticalTransceiverCurrentStatusEntry 14 }
|
||
|
||
raisecomOpticalTransceiverTxFaultCountClear OBJECT-TYPE
|
||
SYNTAX ClearVar
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This object specifies clear the statistcs of tx-fault signals."
|
||
::={ raisecomOpticalTransceiverCurrentStatusEntry 15 }
|
||
|
||
raisecomOpticalTransceiverSpecificationCheckStatus OBJECT-TYPE
|
||
SYNTAX INTEGER{none(0),accord(1),not-accord(2)}
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This object specifies the check status, accord(0)specifies
|
||
the optical module accord with industrial. not-accord(2)
|
||
specifies the optical module not accord with industrial."
|
||
::={ raisecomOpticalTransceiverCurrentStatusEntry 16 }
|
||
|
||
raisecomOpticalTransceiverTxFaultStatus OBJECT-TYPE
|
||
SYNTAX INTEGER{normal(1),tx-fault(2)}
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This object specifies the tx-fault status."
|
||
::={ raisecomOpticalTransceiverCurrentStatusEntry 17 }
|
||
|
||
|
||
-- Notifications
|
||
|
||
raisecomOpticalTransceiverNotifications OBJECT IDENTIFIER ::=
|
||
{ raisecomOpticalTransceiver 3 }
|
||
|
||
raisecomOpticalTransceiverAbsentTrap NOTIFICATION-TYPE
|
||
OBJECTS { raisecomOpticalTransceiverHwInfoAbsStatus }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is sent when the optical module is removed from the device.
|
||
|
||
This notification may be suppressed under the following
|
||
conditions:
|
||
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
|
||
"
|
||
::={ raisecomOpticalTransceiverNotifications 1 }
|
||
|
||
raisecomOpticalTransceiverPresentTrap NOTIFICATION-TYPE
|
||
OBJECTS { raisecomOpticalTransceiverHwInfoAbsStatus,
|
||
raisecomOpticalTransceiverSpecificationCheckStatus }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is sent when the optical module is plugged into the device.
|
||
|
||
This notification may be suppressed under the following
|
||
conditions:
|
||
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
|
||
"
|
||
::={ raisecomOpticalTransceiverNotifications 2 }
|
||
|
||
raisecomOpticalTransceiverNRAlarmTrap NOTIFICATION-TYPE
|
||
OBJECTS { raisecomOpticalTransceiverHwInfoNRStatus }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is sent when the transmitted or received data of optical module is invalid.
|
||
|
||
This notification may be suppressed under the following
|
||
conditions:
|
||
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
|
||
"
|
||
::={ raisecomOpticalTransceiverNotifications 3 }
|
||
|
||
raisecomOpticalTransceiverNRNormalTrap NOTIFICATION-TYPE
|
||
OBJECTS { raisecomOpticalTransceiverHwInfoNRStatus }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is sent when the transmitted or received data of optical module is valid.
|
||
|
||
This notification may be suppressed under the following
|
||
conditions:
|
||
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
|
||
"
|
||
::={ raisecomOpticalTransceiverNotifications 4 }
|
||
|
||
raisecomOpticalTransceiverRxLosAlarmTrap NOTIFICATION-TYPE
|
||
OBJECTS { raisecomOpticalTransceiverHwInfoRxLosStatus }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is sent when the optical module receiving signal is lost.
|
||
|
||
This notification may be suppressed under the following
|
||
conditions:
|
||
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
|
||
"
|
||
::={ raisecomOpticalTransceiverNotifications 5 }
|
||
|
||
raisecomOpticalTransceiverRxLosNormaTrap NOTIFICATION-TYPE
|
||
OBJECTS {raisecomOpticalTransceiverHwInfoRxLosStatus }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is sent when the optical module receiving signal is back to normal.
|
||
|
||
This notification may be suppressed under the following
|
||
conditions:
|
||
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
|
||
"
|
||
::={ raisecomOpticalTransceiverNotifications 6 }
|
||
|
||
raisecomOpticalTransceiverCheckPwdFailureTrap NOTIFICATION-TYPE
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is sent when the optical module password checking is failed.
|
||
|
||
This notification may be suppressed under the following
|
||
conditions:
|
||
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
|
||
"
|
||
::={ raisecomOpticalTransceiverNotifications 7 }
|
||
|
||
raisecomOpticalTransceiverCheckPwdSucceedTrap NOTIFICATION-TYPE
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is sent when the optical module password cheching is successful.
|
||
|
||
This notification may be suppressed under the following
|
||
conditions:
|
||
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
|
||
"
|
||
::={ raisecomOpticalTransceiverNotifications 8 }
|
||
|
||
raisecomOpticalTransceiverParamAlarmTrap NOTIFICATION-TYPE
|
||
OBJECTS { raisecomOpticalTransceiverParameterValue,
|
||
raisecomOpticalTransceiverParamAlarmStatus }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is sent when the optical module parameter value increase to above
|
||
the high alarm threshold or dicrease to under the low alarm threshold.
|
||
|
||
|
||
This notification may be suppressed under the following
|
||
conditions:
|
||
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
|
||
"
|
||
::={ raisecomOpticalTransceiverNotifications 9 }
|
||
|
||
raisecomOpticalTransceiverParamAlarmNormalTrap NOTIFICATION-TYPE
|
||
OBJECTS { raisecomOpticalTransceiverParameterValue,
|
||
raisecomOpticalTransceiverParamAlarmStatus }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is sent when the optical module parameter value dicrease to
|
||
under the high alarm threshold or increase to above the low alarm threshold.
|
||
|
||
This notification may be suppressed under the following
|
||
conditions:
|
||
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
|
||
"
|
||
::={ raisecomOpticalTransceiverNotifications 10 }
|
||
|
||
raisecomOpticalTransceiverParamWarningTrap NOTIFICATION-TYPE
|
||
OBJECTS { raisecomOpticalTransceiverParameterValue,
|
||
raisecomOpticalTransceiverParamAlarmStatus }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is sent when the optical module parameter value increase to above
|
||
the high warning threshold or dicrease to under the low warning threshold.
|
||
|
||
This notification may be suppressed under the following
|
||
conditions:
|
||
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
|
||
"
|
||
::={ raisecomOpticalTransceiverNotifications 11 }
|
||
|
||
raisecomOpticalTransceiverParamWarningNormalTrap NOTIFICATION-TYPE
|
||
OBJECTS { raisecomOpticalTransceiverParameterValue,
|
||
raisecomOpticalTransceiverParamAlarmStatus }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is sent when the optical module parameter value dicrease to
|
||
under the high warning threshold or increase to above the low warning threshold.
|
||
|
||
This notification may be suppressed under the following
|
||
conditions:
|
||
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
|
||
"
|
||
::={ raisecomOpticalTransceiverNotifications 12 }
|
||
|
||
raisecomOpticalTransceiverLaserBackLightAlarmTrap NOTIFICATION-TYPE
|
||
OBJECTS { raisecomOpticalTransceiverParameterValue,
|
||
raisecomOpticalTransceiverParamAlarmStatus }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is sent when the optical module password cheching is successful.
|
||
|
||
This notification may be suppressed under the following
|
||
conditions:
|
||
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
|
||
"
|
||
::={ raisecomOpticalTransceiverNotifications 13 }
|
||
|
||
raisecomOpticalTransceiverLaserBackLightAlarmNormalTrap NOTIFICATION-TYPE
|
||
OBJECTS { raisecomOpticalTransceiverParameterValue,
|
||
raisecomOpticalTransceiverParamAlarmStatus }
|
||
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is sent when the optical module password cheching is successful.
|
||
|
||
This notification may be suppressed under the following
|
||
conditions:
|
||
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
|
||
"
|
||
::={ raisecomOpticalTransceiverNotifications 14 }
|
||
|
||
raisecomOpticalTransceiverLaserLifeAlarmTrap NOTIFICATION-TYPE
|
||
OBJECTS { raisecomOpticalTransceiverParameterValue,
|
||
raisecomOpticalTransceiverParamAlarmStatus }
|
||
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is sent when the optical module password cheching is successful.
|
||
|
||
This notification may be suppressed under the following
|
||
conditions:
|
||
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
|
||
"
|
||
::={ raisecomOpticalTransceiverNotifications 15 }
|
||
|
||
raisecomOpticalTransceiverLaserLifeAlarmNormalTrap NOTIFICATION-TYPE
|
||
OBJECTS { raisecomOpticalTransceiverParameterValue,
|
||
raisecomOpticalTransceiverParamAlarmStatus }
|
||
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is sent when the optical module password cheching is successful.
|
||
|
||
This notification may be suppressed under the following
|
||
conditions:
|
||
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
|
||
"
|
||
::={ raisecomOpticalTransceiverNotifications 16 }
|
||
|
||
raisecomOpticalTransceiverParamLowAlarmTrap NOTIFICATION-TYPE
|
||
OBJECTS { raisecomOpticalTransceiverParameterValue,
|
||
raisecomOpticalTransceiverParamAlarmStatus }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is sent when the optical module parameter value increase to above
|
||
the high alarm threshold or dicrease to under the low alarm threshold.
|
||
|
||
|
||
This notification may be suppressed under the following
|
||
conditions:
|
||
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
|
||
"
|
||
::={ raisecomOpticalTransceiverNotifications 17 }
|
||
|
||
|
||
raisecomOpticalTransceiverParamLowAlarmNormalTrap NOTIFICATION-TYPE
|
||
OBJECTS { raisecomOpticalTransceiverParameterValue,
|
||
raisecomOpticalTransceiverParamAlarmStatus }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is sent when the optical module parameter value increase to above
|
||
the high alarm threshold or dicrease to under the low alarm threshold.
|
||
|
||
|
||
This notification may be suppressed under the following
|
||
conditions:
|
||
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
|
||
"
|
||
::={ raisecomOpticalTransceiverNotifications 18 }
|
||
|
||
raisecomOpticalTransceiverParamLowWarningTrap NOTIFICATION-TYPE
|
||
OBJECTS { raisecomOpticalTransceiverParameterValue,
|
||
raisecomOpticalTransceiverParamAlarmStatus }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is sent when the optical module parameter value increase to above
|
||
the high alarm threshold or dicrease to under the low alarm threshold.
|
||
|
||
|
||
This notification may be suppressed under the following
|
||
conditions:
|
||
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
|
||
"
|
||
::={ raisecomOpticalTransceiverNotifications 19 }
|
||
|
||
raisecomOpticalTransceiverParamLowWarningNormalTrap NOTIFICATION-TYPE
|
||
OBJECTS { raisecomOpticalTransceiverParameterValue,
|
||
raisecomOpticalTransceiverParamAlarmStatus }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is sent when the optical module parameter value increase to above
|
||
the high alarm threshold or dicrease to under the low alarm threshold.
|
||
|
||
|
||
This notification may be suppressed under the following
|
||
conditions:
|
||
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
|
||
"
|
||
::={ raisecomOpticalTransceiverNotifications 20 }
|
||
|
||
|
||
-- Parameters and Notifications
|
||
|
||
raisecomOpticalTransceiverParamNotifications OBJECT IDENTIFIER ::=
|
||
{ raisecomOpticalTransceiver 4 }
|
||
|
||
raisecomOpticalTransceiverTemperatureAlarmTrap NOTIFICATION-TYPE
|
||
OBJECTS { raisecomNotificationLocation,
|
||
raisecomOpticalTransceiverParameterValue,
|
||
raisecomOpticalTransceiverParamAlarmStatus }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is sent when the optical module Temperature value increase to above
|
||
the high alarm threshold or dicrease to under the low alarm threshold.
|
||
|
||
This notification may be suppressed under the following
|
||
conditions:
|
||
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
|
||
"
|
||
::={ raisecomOpticalTransceiverParamNotifications 1 }
|
||
|
||
raisecomOpticalTransceiverTemperatureAlarmNormalTrap NOTIFICATION-TYPE
|
||
OBJECTS { raisecomNotificationLocation,
|
||
raisecomOpticalTransceiverParameterValue,
|
||
raisecomOpticalTransceiverParamAlarmStatus }
|
||
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is sent when the optical module Temperature value dicrease to
|
||
under the high alarm threshold or increase to above the low alarm threshold.
|
||
|
||
This notification may be suppressed under the following
|
||
conditions:
|
||
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
|
||
"
|
||
::={ raisecomOpticalTransceiverParamNotifications 2 }
|
||
|
||
raisecomOpticalTransceiverTemperatureWarningTrap NOTIFICATION-TYPE
|
||
OBJECTS { raisecomNotificationLocation,
|
||
raisecomOpticalTransceiverParameterValue,
|
||
raisecomOpticalTransceiverParamAlarmStatus }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is sent when the optical module Temperature value increase to above
|
||
the high warning threshold or dicrease to under the low warning threshold.
|
||
|
||
This notification may be suppressed under the following
|
||
conditions:
|
||
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
|
||
"
|
||
::={ raisecomOpticalTransceiverParamNotifications 3 }
|
||
|
||
raisecomOpticalTransceiverTemperatureWarningNormalTrap NOTIFICATION-TYPE
|
||
OBJECTS { raisecomNotificationLocation,
|
||
raisecomOpticalTransceiverParameterValue,
|
||
raisecomOpticalTransceiverParamAlarmStatus }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is sent when the optical module Temperature value dicrease to
|
||
under the high warning threshold or increase to above the low warning threshold.
|
||
|
||
This notification may be suppressed under the following
|
||
conditions:
|
||
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
|
||
"
|
||
::={ raisecomOpticalTransceiverParamNotifications 4 }
|
||
|
||
raisecomOpticalTransceiverTxbiasCurrentAlarmTrap NOTIFICATION-TYPE
|
||
OBJECTS { raisecomNotificationLocation,
|
||
raisecomOpticalTransceiverParameterValue,
|
||
raisecomOpticalTransceiverParamAlarmStatus }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is sent when the optical module Tx bias Current value increase to above
|
||
the high alarm threshold or dicrease to under the low alarm threshold.
|
||
|
||
This notification may be suppressed under the following
|
||
conditions:
|
||
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
|
||
"
|
||
::={ raisecomOpticalTransceiverParamNotifications 5 }
|
||
|
||
raisecomOpticalTransceiverTxbiasCurrentAlarmNormalTrap NOTIFICATION-TYPE
|
||
OBJECTS { raisecomNotificationLocation,
|
||
raisecomOpticalTransceiverParameterValue,
|
||
raisecomOpticalTransceiverParamAlarmStatus }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is sent when the optical module Tx bias Current value dicrease to
|
||
under the high alarm threshold or increase to above the low alarm threshold.
|
||
|
||
This notification may be suppressed under the following
|
||
conditions:
|
||
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
|
||
"
|
||
::={ raisecomOpticalTransceiverParamNotifications 6 }
|
||
|
||
raisecomOpticalTransceiverTxbiasCurrentWarningTrap NOTIFICATION-TYPE
|
||
OBJECTS { raisecomNotificationLocation,
|
||
raisecomOpticalTransceiverParameterValue,
|
||
raisecomOpticalTransceiverParamAlarmStatus }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is sent when the optical module Tx bias Current value increase to above
|
||
the high warning threshold or dicrease to under the low warning threshold.
|
||
|
||
This notification may be suppressed under the following
|
||
conditions:
|
||
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
|
||
"
|
||
::={ raisecomOpticalTransceiverParamNotifications 7 }
|
||
|
||
raisecomOpticalTransceiverTxbiasCurrentWarningNormalTrap NOTIFICATION-TYPE
|
||
OBJECTS { raisecomNotificationLocation,
|
||
raisecomOpticalTransceiverParameterValue,
|
||
raisecomOpticalTransceiverParamAlarmStatus }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is sent when the optical module Tx bias Current value dicrease to
|
||
under the high warning threshold or increase to above the low warning threshold.
|
||
|
||
This notification may be suppressed under the following
|
||
conditions:
|
||
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
|
||
"
|
||
::={ raisecomOpticalTransceiverParamNotifications 8 }
|
||
|
||
raisecomOpticalTransceiverTxPowerAlarmTrap NOTIFICATION-TYPE
|
||
OBJECTS { raisecomNotificationLocation,
|
||
raisecomOpticalTransceiverParameterValue,
|
||
raisecomOpticalTransceiverParamAlarmStatus }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is sent when the optical module Tx Power value increase to above
|
||
the high alarm threshold or dicrease to under the low alarm threshold.
|
||
|
||
This notification may be suppressed under the following
|
||
conditions:
|
||
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
|
||
"
|
||
::={ raisecomOpticalTransceiverParamNotifications 9 }
|
||
|
||
raisecomOpticalTransceiverTxPowerAlarmNormalTrap NOTIFICATION-TYPE
|
||
OBJECTS { raisecomNotificationLocation,
|
||
raisecomOpticalTransceiverParameterValue,
|
||
raisecomOpticalTransceiverParamAlarmStatus }
|
||
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is sent when the optical module Tx Power value dicrease to
|
||
under the high alarm threshold or increase to above the low alarm threshold.
|
||
|
||
This notification may be suppressed under the following
|
||
conditions:
|
||
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
|
||
"
|
||
::={ raisecomOpticalTransceiverParamNotifications 10 }
|
||
|
||
raisecomOpticalTransceiverTxPowerWarningTrap NOTIFICATION-TYPE
|
||
OBJECTS { raisecomNotificationLocation,
|
||
raisecomOpticalTransceiverParameterValue,
|
||
raisecomOpticalTransceiverParamAlarmStatus }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is sent when the optical module Tx Power value increase to above
|
||
the high warning threshold or dicrease to under the low warning threshold.
|
||
|
||
This notification may be suppressed under the following
|
||
conditions:
|
||
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
|
||
"
|
||
::={ raisecomOpticalTransceiverParamNotifications 11 }
|
||
|
||
raisecomOpticalTransceiverTxPowerWarningNormalTrap NOTIFICATION-TYPE
|
||
OBJECTS { raisecomNotificationLocation,
|
||
raisecomOpticalTransceiverParameterValue,
|
||
raisecomOpticalTransceiverParamAlarmStatus }
|
||
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is sent when the optical module Tx Power value dicrease to
|
||
under the high warning threshold or increase to above the low warning threshold.
|
||
|
||
This notification may be suppressed under the following
|
||
conditions:
|
||
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
|
||
"
|
||
::={ raisecomOpticalTransceiverParamNotifications 12 }
|
||
|
||
raisecomOpticalTransceiverRxPowerAlarmTrap NOTIFICATION-TYPE
|
||
OBJECTS { raisecomNotificationLocation,
|
||
raisecomOpticalTransceiverParameterValue,
|
||
raisecomOpticalTransceiverParamAlarmStatus }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is sent when the optical module Rx Power value increase to above
|
||
the high alarm threshold or dicrease to under the low alarm threshold.
|
||
|
||
This notification may be suppressed under the following
|
||
conditions:
|
||
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
|
||
"
|
||
::={ raisecomOpticalTransceiverParamNotifications 13 }
|
||
|
||
raisecomOpticalTransceiverRxPowerWarningTrap NOTIFICATION-TYPE
|
||
OBJECTS { raisecomNotificationLocation,
|
||
raisecomOpticalTransceiverParameterValue,
|
||
raisecomOpticalTransceiverParamAlarmStatus }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is sent when the optical module Rx Power value increase to above
|
||
the high warning threshold or dicrease to under the low warning threshold.
|
||
|
||
This notification may be suppressed under the following
|
||
conditions:
|
||
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
|
||
"
|
||
::={ raisecomOpticalTransceiverParamNotifications 14 }
|
||
|
||
raisecomOpticalTransceiverRxPowerWarningNormalTrap NOTIFICATION-TYPE
|
||
OBJECTS { raisecomNotificationLocation,
|
||
raisecomOpticalTransceiverParameterValue,
|
||
raisecomOpticalTransceiverParamAlarmStatus }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is sent when the optical module Rx Power value dicrease to
|
||
under the high warning threshold or increase to above the low warning threshold.
|
||
|
||
This notification may be suppressed under the following
|
||
conditions:
|
||
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
|
||
"
|
||
::={ raisecomOpticalTransceiverParamNotifications 15 }
|
||
|
||
raisecomOpticalTransceiverRxPowerAlarmNormalTrap NOTIFICATION-TYPE
|
||
OBJECTS { raisecomNotificationLocation,
|
||
raisecomOpticalTransceiverParameterValue,
|
||
raisecomOpticalTransceiverParamAlarmStatus }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is sent when the optical module Rx Power value dicrease to
|
||
under the high alarm threshold or increase to above the low alarm threshold.
|
||
|
||
This notification may be suppressed under the following
|
||
conditions:
|
||
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
|
||
"
|
||
::={ raisecomOpticalTransceiverParamNotifications 16 }
|
||
|
||
raisecomOpticalTransceiverLaserTemperatureAlarmTrap NOTIFICATION-TYPE
|
||
OBJECTS { raisecomNotificationLocation,
|
||
raisecomOpticalTransceiverParameterValue,
|
||
raisecomOpticalTransceiverParamAlarmStatus }
|
||
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is sent when the optical module Laser Temperature value increase to above
|
||
the high alarm threshold or dicrease to under the low alarm threshold.
|
||
|
||
This notification may be suppressed under the following
|
||
conditions:
|
||
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
|
||
"
|
||
::={ raisecomOpticalTransceiverParamNotifications 17 }
|
||
|
||
raisecomOpticalTransceiverLaserTemperatureWarningTrap NOTIFICATION-TYPE
|
||
OBJECTS { raisecomNotificationLocation,
|
||
raisecomOpticalTransceiverParameterValue,
|
||
raisecomOpticalTransceiverParamAlarmStatus }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is sent when the optical module Laser Temperature value increase to above
|
||
the high warning threshold or dicrease to under the low warning threshold.
|
||
|
||
This notification may be suppressed under the following
|
||
conditions:
|
||
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
|
||
"
|
||
::={ raisecomOpticalTransceiverParamNotifications 18 }
|
||
|
||
raisecomOpticalTransceiverLaserTemperatureWarningNormalTrap NOTIFICATION-TYPE
|
||
OBJECTS { raisecomNotificationLocation,
|
||
raisecomOpticalTransceiverParameterValue,
|
||
raisecomOpticalTransceiverParamAlarmStatus }
|
||
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is sent when the optical module Laser Temperature value dicrease to
|
||
under the high warning threshold or increase to above the low warning threshold.
|
||
|
||
This notification may be suppressed under the following
|
||
conditions:
|
||
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
|
||
"
|
||
::={ raisecomOpticalTransceiverParamNotifications 19 }
|
||
|
||
raisecomOpticalTransceiverLaserTemperatureAlarmNormalTrap NOTIFICATION-TYPE
|
||
OBJECTS { raisecomNotificationLocation,
|
||
raisecomOpticalTransceiverParameterValue,
|
||
raisecomOpticalTransceiverParamAlarmStatus }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is sent when the optical module Laser Temperature value dicrease to
|
||
under the high alarm threshold or increase to above the low alarm threshold.
|
||
|
||
This notification may be suppressed under the following
|
||
conditions:
|
||
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
|
||
"
|
||
::={ raisecomOpticalTransceiverParamNotifications 20 }
|
||
|
||
raisecomOpticalTransceiverP5V0supplyVoltageAlarmTrap NOTIFICATION-TYPE
|
||
OBJECTS { raisecomNotificationLocation,
|
||
raisecomOpticalTransceiverParameterValue,
|
||
raisecomOpticalTransceiverParamAlarmStatus }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is sent when the optical module +5.0V supply Voltage value increase to above
|
||
the high alarm threshold or dicrease to under the low alarm threshold.
|
||
This notification may be suppressed under the following
|
||
conditions:
|
||
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
|
||
"
|
||
::={ raisecomOpticalTransceiverParamNotifications 21 }
|
||
|
||
raisecomOpticalTransceiverP5V0supplyVoltageWarningTrap NOTIFICATION-TYPE
|
||
OBJECTS { raisecomNotificationLocation,
|
||
raisecomOpticalTransceiverParameterValue,
|
||
raisecomOpticalTransceiverParamAlarmStatus }
|
||
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is sent when the optical module +5.0V supply Voltage value increase to above
|
||
the high warning threshold or dicrease to under the low warning threshold.
|
||
|
||
This notification may be suppressed under the following
|
||
conditions:
|
||
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
|
||
"
|
||
::={ raisecomOpticalTransceiverParamNotifications 22 }
|
||
|
||
raisecomOpticalTransceiverP5V0supplyVoltageWarningNormalTrap NOTIFICATION-TYPE
|
||
OBJECTS { raisecomNotificationLocation,
|
||
raisecomOpticalTransceiverParameterValue,
|
||
raisecomOpticalTransceiverParamAlarmStatus }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is sent when the optical module +5.0V supply Voltage value dicrease to
|
||
under the high warning threshold or increase to above the low warning threshold.
|
||
|
||
This notification may be suppressed under the following
|
||
conditions:
|
||
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
|
||
"
|
||
::={ raisecomOpticalTransceiverParamNotifications 23 }
|
||
|
||
raisecomOpticalTransceiverP5V0supplyVoltageAlarmNormalTrap NOTIFICATION-TYPE
|
||
OBJECTS { raisecomNotificationLocation,
|
||
raisecomOpticalTransceiverParameterValue,
|
||
raisecomOpticalTransceiverParamAlarmStatus }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is sent when the optical module +5.0V supply Voltage value dicrease to
|
||
under the high alarm threshold or increase to above the low alarm threshold.
|
||
|
||
This notification may be suppressed under the following
|
||
conditions:
|
||
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
|
||
"
|
||
::={ raisecomOpticalTransceiverParamNotifications 24 }
|
||
|
||
raisecomOpticalTransceiverP3V3supplyVoltageAlarmTrap NOTIFICATION-TYPE
|
||
OBJECTS { raisecomNotificationLocation,
|
||
raisecomOpticalTransceiverParameterValue,
|
||
raisecomOpticalTransceiverParamAlarmStatus }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is sent when the optical module +3.3V supply Voltage value increase to above
|
||
the high alarm threshold or dicrease to under the low alarm threshold.
|
||
|
||
This notification may be suppressed under the following
|
||
conditions:
|
||
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
|
||
"
|
||
::={ raisecomOpticalTransceiverParamNotifications 25 }
|
||
|
||
raisecomOpticalTransceiverP3V3supplyVoltageWarningTrap NOTIFICATION-TYPE
|
||
OBJECTS { raisecomNotificationLocation,
|
||
raisecomOpticalTransceiverParameterValue,
|
||
raisecomOpticalTransceiverParamAlarmStatus }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is sent when the optical module +3.3V supply Voltage value increase to above
|
||
the high warning threshold or dicrease to under the low warning threshold.
|
||
This notification may be suppressed under the following
|
||
conditions:
|
||
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
|
||
"
|
||
::={ raisecomOpticalTransceiverParamNotifications 26 }
|
||
|
||
raisecomOpticalTransceiverP3V3supplyVoltageWarningNormalTrap NOTIFICATION-TYPE
|
||
OBJECTS { raisecomNotificationLocation,
|
||
raisecomOpticalTransceiverParameterValue,
|
||
raisecomOpticalTransceiverParamAlarmStatus }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is sent when the optical module +3.3V supply Voltage value dicrease to
|
||
under the high warning threshold or increase to above the low warning threshold.
|
||
This notification may be suppressed under the following
|
||
conditions:
|
||
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
|
||
"
|
||
::={ raisecomOpticalTransceiverParamNotifications 27 }
|
||
|
||
raisecomOpticalTransceiverP3V3supplyVoltageAlarmNormalTrap NOTIFICATION-TYPE
|
||
OBJECTS { raisecomNotificationLocation,
|
||
raisecomOpticalTransceiverParameterValue,
|
||
raisecomOpticalTransceiverParamAlarmStatus }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is sent when the optical module +3.3V supply Voltage value dicrease to
|
||
under the high alarm threshold or increase to above the low alarm threshold.
|
||
|
||
This notification may be suppressed under the following
|
||
conditions:
|
||
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
|
||
"
|
||
::={ raisecomOpticalTransceiverParamNotifications 28 }
|
||
|
||
raisecomOpticalTransceiverP1V8supplyVoltageAlarmTrap NOTIFICATION-TYPE
|
||
OBJECTS { raisecomNotificationLocation,
|
||
raisecomOpticalTransceiverParameterValue,
|
||
raisecomOpticalTransceiverParamAlarmStatus }
|
||
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is sent when the optical module +1.8v supply Voltage value increase to above
|
||
the high alarm threshold or dicrease to under the low alarm threshold.
|
||
|
||
This notification may be suppressed under the following
|
||
conditions:
|
||
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
|
||
"
|
||
::={ raisecomOpticalTransceiverParamNotifications 29 }
|
||
|
||
raisecomOpticalTransceiverP1V8supplyVoltageWarningTrap NOTIFICATION-TYPE
|
||
OBJECTS { raisecomNotificationLocation,
|
||
raisecomOpticalTransceiverParameterValue,
|
||
raisecomOpticalTransceiverParamAlarmStatus }
|
||
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is sent when the optical module +1.8v supply Voltage value increase to above
|
||
the high warning threshold or dicrease to under the low warning threshold.
|
||
|
||
This notification may be suppressed under the following
|
||
conditions:
|
||
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
|
||
"
|
||
::={ raisecomOpticalTransceiverParamNotifications 30 }
|
||
|
||
raisecomOpticalTransceiverP1V8supplyVoltageWarningNormalTrap NOTIFICATION-TYPE
|
||
OBJECTS { raisecomNotificationLocation,
|
||
raisecomOpticalTransceiverParameterValue,
|
||
raisecomOpticalTransceiverParamAlarmStatus }
|
||
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is sent when the optical module +1.8v supply Voltage value dicrease to
|
||
under the high warning threshold or increase to above the low warning threshold.
|
||
|
||
This notification may be suppressed under the following
|
||
conditions:
|
||
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
|
||
"
|
||
::={ raisecomOpticalTransceiverParamNotifications 31 }
|
||
|
||
raisecomOpticalTransceiverP1V8supplyVoltageAlarmNormalTrap NOTIFICATION-TYPE
|
||
OBJECTS { raisecomNotificationLocation,
|
||
raisecomOpticalTransceiverParameterValue,
|
||
raisecomOpticalTransceiverParamAlarmStatus }
|
||
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is sent when the optical module +1.8v supply Voltage value dicrease to
|
||
under the high alarm threshold or increase to above the low alarm threshold.
|
||
|
||
This notification may be suppressed under the following
|
||
conditions:
|
||
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
|
||
"
|
||
::={ raisecomOpticalTransceiverParamNotifications 32 }
|
||
|
||
raisecomOpticalTransceiverN5V2supplyVoltageAlarmTrap NOTIFICATION-TYPE
|
||
OBJECTS { raisecomNotificationLocation,
|
||
raisecomOpticalTransceiverParameterValue,
|
||
raisecomOpticalTransceiverParamAlarmStatus }
|
||
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is sent when the optical module -5.2v supply Voltage value increase to above
|
||
the high alarm threshold or dicrease to under the low alarm threshold.
|
||
|
||
This notification may be suppressed under the following
|
||
conditions:
|
||
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
|
||
"
|
||
::={ raisecomOpticalTransceiverParamNotifications 33 }
|
||
|
||
raisecomOpticalTransceiverN5V2supplyVoltageWarningTrap NOTIFICATION-TYPE
|
||
OBJECTS { raisecomNotificationLocation,
|
||
raisecomOpticalTransceiverParameterValue,
|
||
raisecomOpticalTransceiverParamAlarmStatus }
|
||
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is sent when the optical module -5.2v supply Voltage value increase to above
|
||
the high warning threshold or dicrease to under the low warning threshold.
|
||
|
||
This notification may be suppressed under the following
|
||
conditions:
|
||
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
|
||
"
|
||
::={ raisecomOpticalTransceiverParamNotifications 34 }
|
||
|
||
raisecomOpticalTransceiverN5V2supplyVoltageWarningNormalTrap NOTIFICATION-TYPE
|
||
OBJECTS { raisecomNotificationLocation,
|
||
raisecomOpticalTransceiverParameterValue,
|
||
raisecomOpticalTransceiverParamAlarmStatus }
|
||
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is sent when the optical module -5.2v supply Voltage value dicrease to
|
||
under the high warning threshold or increase to above the low warning threshold.
|
||
|
||
This notification may be suppressed under the following
|
||
conditions:
|
||
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
|
||
"
|
||
::={ raisecomOpticalTransceiverParamNotifications 35 }
|
||
|
||
raisecomOpticalTransceiverN5V2supplyVoltageAlarmNormalTrap NOTIFICATION-TYPE
|
||
OBJECTS { raisecomNotificationLocation,
|
||
raisecomOpticalTransceiverParameterValue,
|
||
raisecomOpticalTransceiverParamAlarmStatus }
|
||
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is sent when the optical module -5.2v supply Voltage value dicrease to
|
||
under the high alarm threshold or increase to above the low alarm threshold.
|
||
|
||
This notification may be suppressed under the following
|
||
conditions:
|
||
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
|
||
"
|
||
::={ raisecomOpticalTransceiverParamNotifications 36 }
|
||
|
||
raisecomOpticalTransceiverApdBiasVoltageAlarmTrap NOTIFICATION-TYPE
|
||
OBJECTS { raisecomNotificationLocation,
|
||
raisecomOpticalTransceiverParameterValue,
|
||
raisecomOpticalTransceiverParamAlarmStatus }
|
||
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is sent when the optical module APD Bias Voltage value increase to above
|
||
the high alarm threshold or dicrease to under the low alarm threshold.
|
||
|
||
This notification may be suppressed under the following
|
||
conditions:
|
||
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
|
||
"
|
||
::={ raisecomOpticalTransceiverParamNotifications 37 }
|
||
|
||
raisecomOpticalTransceiverApdBiasVoltageWarningTrap NOTIFICATION-TYPE
|
||
OBJECTS { raisecomNotificationLocation,
|
||
raisecomOpticalTransceiverParameterValue,
|
||
raisecomOpticalTransceiverParamAlarmStatus }
|
||
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is sent when the optical module APD Bias Voltage value increase to above
|
||
the high warning threshold or dicrease to under the low warning threshold.
|
||
|
||
This notification may be suppressed under the following
|
||
conditions:
|
||
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
|
||
"
|
||
::={ raisecomOpticalTransceiverParamNotifications 38 }
|
||
|
||
raisecomOpticalTransceiverApdBiasVoltageWarningNormalTrap NOTIFICATION-TYPE
|
||
OBJECTS { raisecomNotificationLocation,
|
||
raisecomOpticalTransceiverParameterValue,
|
||
raisecomOpticalTransceiverParamAlarmStatus }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is sent when the optical module APD Bias Voltage value dicrease to
|
||
under the high warning threshold or increase to above the low warning threshold.
|
||
|
||
This notification may be suppressed under the following
|
||
conditions:
|
||
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
|
||
"
|
||
::={ raisecomOpticalTransceiverParamNotifications 39 }
|
||
|
||
raisecomOpticalTransceiverApdBiasVoltageAlarmNormalTrap NOTIFICATION-TYPE
|
||
OBJECTS { raisecomNotificationLocation,
|
||
raisecomOpticalTransceiverParameterValue,
|
||
raisecomOpticalTransceiverParamAlarmStatus }
|
||
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is sent when the optical module APD Bias Voltage value dicrease to
|
||
under the high alarm threshold or increase to above the low alarm threshold.
|
||
|
||
|
||
This notification may be suppressed under the following
|
||
conditions:
|
||
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
|
||
"
|
||
::={ raisecomOpticalTransceiverParamNotifications 40 }
|
||
|
||
raisecomOpticalTransceiverP5V0supplyCurrentAlarmTrap NOTIFICATION-TYPE
|
||
OBJECTS { raisecomNotificationLocation,
|
||
raisecomOpticalTransceiverParameterValue,
|
||
raisecomOpticalTransceiverParamAlarmStatus }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is sent when the optical module +5.0V supply Current value increase to above
|
||
the high alarm threshold or dicrease to under the low alarm threshold.
|
||
|
||
This notification may be suppressed under the following
|
||
conditions:
|
||
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
|
||
"
|
||
::={ raisecomOpticalTransceiverParamNotifications 41 }
|
||
|
||
raisecomOpticalTransceiverP5V0supplyCurrentWarningTrap NOTIFICATION-TYPE
|
||
OBJECTS { raisecomNotificationLocation,
|
||
raisecomOpticalTransceiverParameterValue,
|
||
raisecomOpticalTransceiverParamAlarmStatus }
|
||
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is sent when the optical module +5.0V supply Current value increase to above
|
||
the high warning threshold or dicrease to under the low warning threshold.
|
||
|
||
This notification may be suppressed under the following
|
||
conditions:
|
||
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
|
||
"
|
||
::={ raisecomOpticalTransceiverParamNotifications 42 }
|
||
|
||
raisecomOpticalTransceiverP5V0supplyCurrentWarningNormalTrap NOTIFICATION-TYPE
|
||
OBJECTS { raisecomNotificationLocation,
|
||
raisecomOpticalTransceiverParameterValue,
|
||
raisecomOpticalTransceiverParamAlarmStatus }
|
||
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is sent when the optical module +5.0V supply Current value dicrease to
|
||
under the high warning threshold or increase to above the low warning threshold.
|
||
|
||
This notification may be suppressed under the following
|
||
conditions:
|
||
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
|
||
"
|
||
::={ raisecomOpticalTransceiverParamNotifications 43 }
|
||
|
||
raisecomOpticalTransceiverP5V0supplyCurrentAlarmNormalTrap NOTIFICATION-TYPE
|
||
OBJECTS { raisecomNotificationLocation,
|
||
raisecomOpticalTransceiverParameterValue,
|
||
raisecomOpticalTransceiverParamAlarmStatus }
|
||
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is sent when the optical module +5.0V supply Current value dicrease to
|
||
under the high alarm threshold or increase to above the low alarm threshold.
|
||
|
||
This notification may be suppressed under the following
|
||
conditions:
|
||
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
|
||
"
|
||
::={ raisecomOpticalTransceiverParamNotifications 44 }
|
||
|
||
raisecomOpticalTransceiverP3V3supplyCurrentAlarmTrap NOTIFICATION-TYPE
|
||
OBJECTS { raisecomNotificationLocation,
|
||
raisecomOpticalTransceiverParameterValue,
|
||
raisecomOpticalTransceiverParamAlarmStatus }
|
||
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is sent when the optical module +3.3V supply Current value increase to above
|
||
the high alarm threshold or dicrease to under the low alarm threshold.
|
||
|
||
This notification may be suppressed under the following
|
||
conditions:
|
||
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
|
||
"
|
||
::={ raisecomOpticalTransceiverParamNotifications 45 }
|
||
|
||
raisecomOpticalTransceiverP3V3supplyCurrentWarningTrap NOTIFICATION-TYPE
|
||
OBJECTS { raisecomNotificationLocation,
|
||
raisecomOpticalTransceiverParameterValue,
|
||
raisecomOpticalTransceiverParamAlarmStatus }
|
||
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is sent when the optical module +3.3V supply Current value increase to above
|
||
the high warning threshold or dicrease to under the low warning threshold.
|
||
|
||
This notification may be suppressed under the following
|
||
conditions:
|
||
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
|
||
"
|
||
::={ raisecomOpticalTransceiverParamNotifications 46 }
|
||
|
||
raisecomOpticalTransceiverP3V3supplyCurrentWarningNormalTrap NOTIFICATION-TYPE
|
||
OBJECTS { raisecomNotificationLocation,
|
||
raisecomOpticalTransceiverParameterValue,
|
||
raisecomOpticalTransceiverParamAlarmStatus }
|
||
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is sent when the optical module +3.3V supply Current value dicrease to
|
||
under the high warning threshold or increase to above the low warning threshold.
|
||
|
||
This notification may be suppressed under the following
|
||
conditions:
|
||
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
|
||
"
|
||
::={ raisecomOpticalTransceiverParamNotifications 47 }
|
||
|
||
raisecomOpticalTransceiverP3V3supplyCurrentAlarmNormalTrap NOTIFICATION-TYPE
|
||
OBJECTS { raisecomNotificationLocation,
|
||
raisecomOpticalTransceiverParameterValue,
|
||
raisecomOpticalTransceiverParamAlarmStatus }
|
||
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is sent when the optical module +3.3V supply Current value dicrease to
|
||
under the high alarm threshold or increase to above the low alarm threshold.
|
||
|
||
This notification may be suppressed under the following
|
||
conditions:
|
||
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
|
||
"
|
||
::={ raisecomOpticalTransceiverParamNotifications 48 }
|
||
|
||
raisecomOpticalTransceiverP1V8supplyCurrentAlarmTrap NOTIFICATION-TYPE
|
||
OBJECTS { raisecomNotificationLocation,
|
||
raisecomOpticalTransceiverParameterValue,
|
||
raisecomOpticalTransceiverParamAlarmStatus }
|
||
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is sent when the optical module +1.8V supply Current value increase to above
|
||
the high alarm threshold or dicrease to under the low alarm threshold.
|
||
|
||
This notification may be suppressed under the following
|
||
conditions:
|
||
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
|
||
"
|
||
::={ raisecomOpticalTransceiverParamNotifications 49 }
|
||
|
||
raisecomOpticalTransceiverP1V8supplyCurrentWarningTrap NOTIFICATION-TYPE
|
||
OBJECTS { raisecomNotificationLocation,
|
||
raisecomOpticalTransceiverParameterValue,
|
||
raisecomOpticalTransceiverParamAlarmStatus }
|
||
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is sent when the optical module +1.8V supply Current value increase to above
|
||
the high warning threshold or dicrease to under the low warning threshold.
|
||
|
||
This notification may be suppressed under the following
|
||
conditions:
|
||
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
|
||
"
|
||
::={ raisecomOpticalTransceiverParamNotifications 50 }
|
||
|
||
raisecomOpticalTransceiverP1V8supplyCurrentWarningNormalTrap NOTIFICATION-TYPE
|
||
OBJECTS { raisecomNotificationLocation,
|
||
raisecomOpticalTransceiverParameterValue,
|
||
raisecomOpticalTransceiverParamAlarmStatus }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is sent when the optical module +1.8V supply Current value dicrease to
|
||
under the high warning threshold or increase to above the low warning threshold.
|
||
|
||
This notification may be suppressed under the following
|
||
conditions:
|
||
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
|
||
"
|
||
::={ raisecomOpticalTransceiverParamNotifications 51 }
|
||
|
||
raisecomOpticalTransceiverP1V8supplyCurrentAlarmNormalTrap NOTIFICATION-TYPE
|
||
OBJECTS { raisecomNotificationLocation,
|
||
raisecomOpticalTransceiverParameterValue,
|
||
raisecomOpticalTransceiverParamAlarmStatus }
|
||
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is sent when the optical module +1.8V supply Current value dicrease to
|
||
under the high alarm threshold or increase to above the low alarm threshold.
|
||
|
||
This notification may be suppressed under the following
|
||
conditions:
|
||
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
|
||
"
|
||
::={ raisecomOpticalTransceiverParamNotifications 52 }
|
||
|
||
raisecomOpticalTransceiverN5V2supplyCurrentAlarmTrap NOTIFICATION-TYPE
|
||
OBJECTS { raisecomNotificationLocation,
|
||
raisecomOpticalTransceiverParameterValue,
|
||
raisecomOpticalTransceiverParamAlarmStatus }
|
||
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is sent when the optical module -5.2V supply Current value increase to above
|
||
the high alarm threshold or dicrease to under the low alarm threshold.
|
||
|
||
This notification may be suppressed under the following
|
||
conditions:
|
||
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
|
||
"
|
||
::={ raisecomOpticalTransceiverParamNotifications 53 }
|
||
|
||
raisecomOpticalTransceiverN5V2supplyCurrentWarningTrap NOTIFICATION-TYPE
|
||
OBJECTS { raisecomNotificationLocation,
|
||
raisecomOpticalTransceiverParameterValue,
|
||
raisecomOpticalTransceiverParamAlarmStatus }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is sent when the optical module -5.2V supply Current value increase to above
|
||
the high warning threshold or dicrease to under the low warning threshold.
|
||
|
||
This notification may be suppressed under the following
|
||
conditions:
|
||
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
|
||
"
|
||
::={ raisecomOpticalTransceiverParamNotifications 54 }
|
||
|
||
raisecomOpticalTransceiverN5V2supplyCurrentWarningNormalTrap NOTIFICATION-TYPE
|
||
OBJECTS { raisecomNotificationLocation,
|
||
raisecomOpticalTransceiverParameterValue,
|
||
raisecomOpticalTransceiverParamAlarmStatus }
|
||
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is sent when the optical module -5.2V supply Current value dicrease to
|
||
under the high warning threshold or increase to above the low warning threshold.
|
||
|
||
This notification may be suppressed under the following
|
||
conditions:
|
||
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
|
||
"
|
||
::={ raisecomOpticalTransceiverParamNotifications 55 }
|
||
|
||
raisecomOpticalTransceiverN5V2supplyCurrentAlarmNormalTrap NOTIFICATION-TYPE
|
||
OBJECTS { raisecomNotificationLocation,
|
||
raisecomOpticalTransceiverParameterValue,
|
||
raisecomOpticalTransceiverParamAlarmStatus }
|
||
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is sent when the optical module -5.2V supply Current value dicrease to
|
||
under the high alarm threshold or increase to above the low alarm threshold.
|
||
|
||
This notification may be suppressed under the following
|
||
conditions:
|
||
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
|
||
"
|
||
::={ raisecomOpticalTransceiverParamNotifications 56 }
|
||
|
||
raisecomOpticalTransceiverTecCurrentAlarmTrap NOTIFICATION-TYPE
|
||
OBJECTS { raisecomNotificationLocation,
|
||
raisecomOpticalTransceiverParameterValue,
|
||
raisecomOpticalTransceiverParamAlarmStatus }
|
||
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is sent when the optical module TecCurrent value increase to above
|
||
the high alarm threshold or dicrease to under the low alarm threshold.
|
||
|
||
This notification may be suppressed under the following
|
||
conditions:
|
||
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
|
||
"
|
||
::={ raisecomOpticalTransceiverParamNotifications 57 }
|
||
|
||
raisecomOpticalTransceiverTecCurrentWarningTrap NOTIFICATION-TYPE
|
||
OBJECTS { raisecomNotificationLocation,
|
||
raisecomOpticalTransceiverParameterValue,
|
||
raisecomOpticalTransceiverParamAlarmStatus }
|
||
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is sent when the optical module TecCurrent value increase to above
|
||
the high warning threshold or dicrease to under the low warning threshold.
|
||
|
||
This notification may be suppressed under the following
|
||
conditions:
|
||
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
|
||
"
|
||
::={ raisecomOpticalTransceiverParamNotifications 58 }
|
||
|
||
raisecomOpticalTransceiverTecCurrentWarningNormalTrap NOTIFICATION-TYPE
|
||
OBJECTS { raisecomNotificationLocation,
|
||
raisecomOpticalTransceiverParameterValue,
|
||
raisecomOpticalTransceiverParamAlarmStatus }
|
||
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is sent when the optical module TecCurrent value dicrease to
|
||
under the high warning threshold or increase to above the low warning threshold.
|
||
|
||
This notification may be suppressed under the following
|
||
conditions:
|
||
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
|
||
"
|
||
::={ raisecomOpticalTransceiverParamNotifications 59 }
|
||
|
||
raisecomOpticalTransceiverTecCurrentAlarmNormalTrap NOTIFICATION-TYPE
|
||
OBJECTS { raisecomNotificationLocation,
|
||
raisecomOpticalTransceiverParameterValue,
|
||
raisecomOpticalTransceiverParamAlarmStatus }
|
||
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is sent when the optical module TecCurrent value dicrease to
|
||
under the high alarm threshold or increase to above the low alarm threshold.
|
||
|
||
This notification may be suppressed under the following
|
||
conditions:
|
||
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
|
||
"
|
||
::={ raisecomOpticalTransceiverParamNotifications 60 }
|
||
|
||
raisecomOpticalTransceiverLaserWavelengthAlarmTrap NOTIFICATION-TYPE
|
||
OBJECTS { raisecomNotificationLocation,
|
||
raisecomOpticalTransceiverParameterValue,
|
||
raisecomOpticalTransceiverParamAlarmStatus }
|
||
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is sent when the optical module laserWavelength value increase to above
|
||
the high alarm threshold or dicrease to under the low alarm threshold.
|
||
|
||
|
||
This notification may be suppressed under the following
|
||
conditions:
|
||
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
|
||
"
|
||
::={ raisecomOpticalTransceiverParamNotifications 61 }
|
||
|
||
raisecomOpticalTransceiverLaserWavelengthWarningTrap NOTIFICATION-TYPE
|
||
OBJECTS { raisecomNotificationLocation,
|
||
raisecomOpticalTransceiverParameterValue,
|
||
raisecomOpticalTransceiverParamAlarmStatus }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is sent when the optical module laserWavelength value increase to above
|
||
the high warning threshold or dicrease to under the low warning threshold.
|
||
|
||
|
||
This notification may be suppressed under the following
|
||
conditions:
|
||
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
|
||
"
|
||
::={ raisecomOpticalTransceiverParamNotifications 62 }
|
||
|
||
raisecomOpticalTransceiverLaserWavelengthWarningNormalTrap NOTIFICATION-TYPE
|
||
OBJECTS { raisecomNotificationLocation,
|
||
raisecomOpticalTransceiverParameterValue,
|
||
raisecomOpticalTransceiverParamAlarmStatus }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is sent when the optical module laserWavelength value dicrease to
|
||
under the high warning threshold or increase to above the low warning threshold.
|
||
|
||
This notification may be suppressed under the following
|
||
conditions:
|
||
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
|
||
"
|
||
::={ raisecomOpticalTransceiverParamNotifications 63 }
|
||
|
||
raisecomOpticalTransceiverLaserWavelengthAlarmNormalTrap NOTIFICATION-TYPE
|
||
OBJECTS { raisecomNotificationLocation,
|
||
raisecomOpticalTransceiverParameterValue,
|
||
raisecomOpticalTransceiverParamAlarmStatus }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is sent when the optical module laserWavelength value dicrease to
|
||
under the high alarm threshold or increase to above the low alarm threshold.
|
||
|
||
This notification may be suppressed under the following
|
||
conditions:
|
||
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
|
||
"
|
||
::={ raisecomOpticalTransceiverParamNotifications 64 }
|
||
|
||
raisecomOpticalTransceiverTxFaultTrap NOTIFICATION-TYPE
|
||
OBJECTS { raisecomOpticalTransceiverTxFaultStatus }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is sent when the SFP optical module occures Tx-fault signal.
|
||
|
||
This notification may be suppressed under the following
|
||
conditions:
|
||
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
|
||
"
|
||
::={ raisecomOpticalTransceiverParamNotifications 65 }
|
||
|
||
raisecomOpticalTransceiverTxNormalTrap NOTIFICATION-TYPE
|
||
OBJECTS { raisecomOpticalTransceiverTxFaultStatus }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is sent when the SFP optical module cancels the Tx-fault signal.
|
||
|
||
This notification may be suppressed under the following
|
||
conditions:
|
||
- depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
|
||
"
|
||
::={ raisecomOpticalTransceiverParamNotifications 66 }
|
||
|
||
END
|