1694 lines
53 KiB
Plaintext
1694 lines
53 KiB
Plaintext
SAF-IPRADIO DEFINITIONS ::= BEGIN
|
|
-- old name: SAF-IPFODU
|
|
--
|
|
-- Mib for: SAF CFIP FODU v1.3x, v1.4x and SAF CFIP FODU GE (Lumina) v1.4x
|
|
-- released after 2009.07.20
|
|
-- SAF CFIP IDU (Phoenix)
|
|
-- released after 2010.02.20
|
|
-- FreeMile
|
|
-- Version: 1.1.9
|
|
-- Date/Time: 2014.01.16 13:20
|
|
-- Version: 1.1.89
|
|
-- Date/Time: 2013.03.14 14:00
|
|
-- Version: 1.1.88
|
|
-- Date/Time: 2012.09.25 11:37
|
|
-- Version: 1.1.87
|
|
-- Date/Time: 2012.07.19 11:22
|
|
-- Version: 1.1.7
|
|
-- Date/Time: 2012.06.25 18:28
|
|
-- Version: 1.1.6
|
|
-- Date/Time: 2012.03.30 11:59
|
|
-- Version: 1.1.5
|
|
-- Date/Time: 2011.05.05 13:23
|
|
-- Version: 1.1.4
|
|
-- Date/Time: 2010.10.27 16:17
|
|
-- Version: 1.1.3
|
|
-- Date/Time: 2010.09.27 14:05
|
|
-- Version: 1.1.2
|
|
-- Date/Time: 2009.09.20 15:10
|
|
-- Customer suport: <techsupport@saftehnika.com>
|
|
-- Author: Andris Kluga
|
|
--
|
|
-- Additional modules supported by device --
|
|
-- SAF-ALARM-MIB ( OID 1.3.6.1.4.1.7571.100.118 )
|
|
--
|
|
-- History --
|
|
-- 2008.07.11 initial release 1.0.0 (originally named 1.00)
|
|
-- 2008.10.21 removed loopbacks: rf,far,ethernet (unsupported by hardware)
|
|
-- 2008.11.04 added vlan 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.13,14
|
|
-- 2009.01.09 changes in comments
|
|
-- 2009.01.22 changed e1 to e1t1 to use with both etsi and ansi modems
|
|
-- 2009.03.18 temperature in degrees C (no more *10)
|
|
-- 2009.05.11 e1 mask
|
|
-- 2009.07.14 e1t1ChannelNr
|
|
-- 2010.02.17 one mib for all IP products
|
|
-- 2010.09.27 FreeMile (added qpsklimited modulation)
|
|
-- 2010.10.13 for Lumina w/o duplexer radioSide read-write
|
|
-- 2010.10.27 add comment at radioTxPower: to turn power off SET the value -100
|
|
-- 2012.03.28 apsk16 apsk32 modulations changed to qam16 qam32; location length string set to 16
|
|
-- 2012.03.30 minor changes
|
|
-- 2012.06.25 added new QAM modulations to "replace" old PSK modulations.
|
|
-- 2012.07.10 minor syntax changes.
|
|
-- 2012.09.25 reset descripotion change. 1 - cold 2 - warm.
|
|
-- 2013.03.14 minor changes for mib validation
|
|
-- 2014.01.16 add license status
|
|
|
|
|
|
IMPORTS
|
|
enterprises, NetworkAddress, IpAddress,
|
|
Counter, Gauge, TimeTicks FROM RFC1155-SMI
|
|
OBJECT-TYPE FROM RFC-1212
|
|
DisplayString, ifEntry FROM RFC1213-MIB
|
|
DateAndTime FROM SNMPv2-TC
|
|
TRAP-TYPE FROM RFC-1215;
|
|
|
|
|
|
saf OBJECT IDENTIFIER ::= { enterprises 7571 }
|
|
tehnika OBJECT IDENTIFIER ::= { saf 100 }
|
|
microwaveRadio OBJECT IDENTIFIER ::= { tehnika 1}
|
|
pointToPoint OBJECT IDENTIFIER ::= { microwaveRadio 1 }
|
|
|
|
safip OBJECT IDENTIFIER ::= { pointToPoint 5 }
|
|
ipRadio OBJECT IDENTIFIER ::= { safip 1 }
|
|
|
|
ipRadioCfg OBJECT IDENTIFIER ::= { ipRadio 1 }
|
|
ipRadioMgmt OBJECT IDENTIFIER ::= { ipRadio 2 }
|
|
ipRadioStat OBJECT IDENTIFIER ::= { ipRadio 3 }
|
|
ipRadioCfgGeneral OBJECT IDENTIFIER ::= { ipRadioCfg 1 }
|
|
ipRadioCfgNetwork OBJECT IDENTIFIER ::= { ipRadioCfg 2 }
|
|
ipRadioStatEth OBJECT IDENTIFIER ::= { ipRadioStat 2 }
|
|
modemStatistics OBJECT IDENTIFIER ::= { ipRadioStat 4 } -- 2011.05.05
|
|
|
|
|
|
product OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..255))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Name of the model."
|
|
::= { ipRadioCfgGeneral 1 }
|
|
|
|
description OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..255))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Description of the model."
|
|
::= { ipRadioCfgGeneral 2 }
|
|
|
|
hostname OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..16))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The name of the host."
|
|
::= { ipRadioCfgGeneral 3 }
|
|
|
|
sysDateAndTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Current date and time set.
|
|
For SET tenths of seconds ignored."
|
|
::= { ipRadioCfgGeneral 4 }
|
|
|
|
sysTemperature OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unit temperature in degrees by Celsius.
|
|
NB - sw before 2009.03.18 shows in *10 degrees"
|
|
::= { ipRadioCfgGeneral 5 }
|
|
|
|
license OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..255))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "To set license information. Read allways 'OK'."
|
|
::= { ipRadioCfgGeneral 6 }
|
|
|
|
licenseMask OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Read license mask."
|
|
::= { ipRadioCfgGeneral 7 }
|
|
|
|
licenseUpdateStatus OBJECT-TYPE
|
|
-- starting from v 1.64.25
|
|
SYNTAX INTEGER {
|
|
ok(1),
|
|
error(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Status of last license update operation
|
|
by setting license using snmp."
|
|
::= { ipRadioCfgGeneral 8 }
|
|
|
|
writeConfig OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS write-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Write Config"
|
|
::= { ipRadioMgmt 1 }
|
|
|
|
restartcpu OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS write-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Restart of Mng CPU. Values:
|
|
1 - 'cold' restart;
|
|
3 - sw"
|
|
::= { ipRadioMgmt 2 }
|
|
|
|
loopbacks OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
error(1),
|
|
off(2),
|
|
-- rf(3), 2008.10.21
|
|
if(4),
|
|
modem(5),
|
|
-- far(6), 2008.10.21
|
|
-- ethernet(7), 2008.10.21
|
|
-- e1t1-1(8), use tributary mask
|
|
-- e1t1-2(9),
|
|
-- e1t1-3(10),
|
|
-- e1t1-4(11),
|
|
multi(12)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Set loopback for 1 minute. value error(1) is not writable.
|
|
Status of loopbacks.
|
|
Values:
|
|
1 - 'error' (not writable);
|
|
2 - 'off';
|
|
3 - 'rf' (radio frequency loopback); N/A 2008.10.21
|
|
4 - 'if' (intermediate frequency loopback);
|
|
5 - 'modem' (modem loopback);
|
|
6 - 'far' (far end loopback); N/A 2008.10.21
|
|
7 - 'ethernet' (Ethernet loopback); N/A 2008.10.21
|
|
8 - 'e1t1-1' (E1/T1 channel 1 loopback); N/A from firmware 1.51
|
|
9 - 'e1t1-2' (E1/T1 channel 2 loopback); N/A from firmware 1.51
|
|
10 - 'e1t1-3' (E1/T1 channel 3 loopback); N/A from firmware 1.51
|
|
11 - 'e1t1-4' (E1/T1 channel 4 loopback); N/A from firmware 1.51
|
|
12 - 'multi' (E1/T1 multi - look channel tributary mask)"
|
|
::= { ipRadioMgmt 3 }
|
|
|
|
loopback-tributary-mask OBJECT-TYPE
|
|
-- starting from firmware version 1.51
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Loopback mask for E1/T1 channels"
|
|
::= { ipRadioMgmt 4 }
|
|
|
|
--loopbacks-text OBJECT-TYPE
|
|
-- starting from firmware version 1.51
|
|
-- SYNTAX DisplayString (SIZE(0..255))
|
|
-- ACCESS read-only
|
|
-- STATUS mandatory
|
|
-- DESCRIPTION "This string gives the same information as loopbacks and loopback-tributary-mask
|
|
-- as a text string"
|
|
-- ::= { ipRadioMgmt 5 }
|
|
|
|
localIp OBJECT-TYPE
|
|
-- added 2008.09.22
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "IPv4 Ethernet address of the local
|
|
unit in a number format(XXX.XXX.XXX.XXX)"
|
|
::= { ipRadioCfgNetwork 1 }
|
|
localIpMask OBJECT-TYPE
|
|
-- added 2008.09.22
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "IPv4 Ethernet mask of the local
|
|
unit in a number format (XXX.XXX.XXX.XXX)"
|
|
::= { ipRadioCfgNetwork 2 }
|
|
remoteIp OBJECT-TYPE
|
|
-- added 2008.09.22
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "IPv4 Ethernet address of the remote
|
|
unit in a number format (XXX.XXX.XXX.XXX)."
|
|
::= { ipRadioCfgNetwork 3 }
|
|
|
|
--
|
|
|
|
radioTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RadioEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Radio table."
|
|
::= { ipRadioCfgGeneral 10 }
|
|
|
|
radioEntry OBJECT-TYPE
|
|
SYNTAX RadioEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Entry containing objects in radio table."
|
|
INDEX { radioIndex }
|
|
::= { radioTable 1 }
|
|
RadioEntry ::=
|
|
SEQUENCE {
|
|
radioIndex
|
|
INTEGER,
|
|
radioGenStatus
|
|
INTEGER,
|
|
radioSide
|
|
INTEGER,
|
|
radioTxPower
|
|
INTEGER,
|
|
radioRxLevel
|
|
INTEGER,
|
|
radioDuplexShift
|
|
INTEGER,
|
|
radioLoopback
|
|
INTEGER,
|
|
radioTxMute
|
|
INTEGER,
|
|
radioTxFrequency
|
|
INTEGER,
|
|
radioRxFrequency
|
|
INTEGER
|
|
|
|
}
|
|
|
|
radioIndex OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
local(1),
|
|
remote(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A unique value for each radio.
|
|
Its value represents UNIT:
|
|
1 - for 'local';
|
|
2 - for 'remote'"
|
|
::= { radioEntry 1 }
|
|
|
|
radioGenStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A General status of each radio:
|
|
1 - 'OK';
|
|
2 - 'error'"
|
|
::= { radioEntry 2 }
|
|
|
|
radioSide OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
high(1),
|
|
low(2)
|
|
}
|
|
ACCESS read-write
|
|
-- warning!!! This value writable only on devices w/o hw duplexer.
|
|
-- In all other cases this is read-only.
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Side for duplex communication."
|
|
::= { radioEntry 3 }
|
|
|
|
radioTxPower OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Tx power of radio transmitter in dBm."
|
|
-- to turn power off SET the value -100
|
|
::= { radioEntry 4 }
|
|
|
|
radioRxLevel OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Received signal level in dBm."
|
|
::= { radioEntry 5 }
|
|
|
|
radioDuplexShift OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Utilized duplex shift in KHz."
|
|
::= { radioEntry 6 }
|
|
|
|
radioLoopback OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
on(1),
|
|
off(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Radio loopback on/off. To set use
|
|
loopback command."
|
|
::= { radioEntry 7 }
|
|
|
|
radioTxMute OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
on(1),
|
|
off(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Status of 'Tx mute':
|
|
1 - Tx is muted;
|
|
2 - Tx is not muted."
|
|
::= { radioEntry 8 }
|
|
|
|
radioTxFrequency OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Tx frequency in kHz."
|
|
::= { radioEntry 9 }
|
|
|
|
radioRxFrequency OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Rx frequency in kHz."
|
|
::= { radioEntry 10 }
|
|
|
|
--
|
|
|
|
-- ATPC
|
|
|
|
|
|
aTPCTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ATPCEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"ATPC table"
|
|
::= { ipRadioCfgGeneral 11 }
|
|
|
|
aTPCEntry OBJECT-TYPE
|
|
SYNTAX ATPCEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Entry containing objects in ATPC table."
|
|
INDEX { atpcIndex }
|
|
::= { aTPCTable 1 }
|
|
|
|
ATPCEntry ::=
|
|
SEQUENCE {
|
|
atpcIndex
|
|
INTEGER,
|
|
atpcEnabled
|
|
INTEGER,
|
|
atpcTxPowerCorrection
|
|
INTEGER
|
|
-- atpcTxPowerWithCorrection
|
|
-- INTEGER
|
|
}
|
|
|
|
atpcIndex OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
local(1),
|
|
remote(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Its value represents UNIT
|
|
1 for 'local';
|
|
2 for 'remote'."
|
|
::= { aTPCEntry 1 }
|
|
|
|
atpcEnabled OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "ATPC status:
|
|
1 for 'on';
|
|
2 for 'off'."
|
|
::= { aTPCEntry 2 }
|
|
|
|
atpcTxPowerCorrection OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "ATPC Tx power correction in dBm."
|
|
::= { aTPCEntry 3 }
|
|
|
|
--atpcTxPowerWithCorrection OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- ACCESS read-only
|
|
-- STATUS mandatory
|
|
-- DESCRIPTION "Tx power together with ATPC correction in dBm."
|
|
-- ::= { aTPCEntry 4 }
|
|
|
|
-- modem
|
|
|
|
modemTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ModemEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"CFIP modem table."
|
|
::= { ipRadioCfgGeneral 12 }
|
|
|
|
modemEntry OBJECT-TYPE
|
|
SYNTAX ModemEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Entry containing objects in modem table."
|
|
INDEX { modemIndex }
|
|
::= { modemTable 1 }
|
|
|
|
ModemEntry ::=
|
|
SEQUENCE {
|
|
modemIndex
|
|
INTEGER,
|
|
modemGeneralStatus
|
|
INTEGER,
|
|
modemBandwith
|
|
INTEGER,
|
|
modemE1T1Channels
|
|
INTEGER,
|
|
modemModulation
|
|
INTEGER,
|
|
modemTotalCapacity
|
|
INTEGER,
|
|
modemEthernetCapacity
|
|
INTEGER,
|
|
modemAcqStatus
|
|
INTEGER,
|
|
modemLastAcqError
|
|
INTEGER,
|
|
modemRadialMSE
|
|
INTEGER,
|
|
modemInternalAGCgain
|
|
INTEGER,
|
|
modemCarrierOffset
|
|
INTEGER,
|
|
modemSymbolRateTx
|
|
INTEGER,
|
|
modemSymbolRateRx
|
|
INTEGER,
|
|
modemLDPCdecoderStress
|
|
DisplayString,
|
|
modemACMengine
|
|
INTEGER,
|
|
modemACMmodulationMin
|
|
INTEGER,
|
|
modemACMtotalCapacity
|
|
INTEGER,
|
|
modemACMethernetCapacity
|
|
INTEGER,
|
|
modemStandard -- only starting from v 2.20
|
|
INTEGER,
|
|
modemE1T1ChannelMask
|
|
INTEGER,
|
|
modemACMmodulationMax
|
|
INTEGER,
|
|
modemRowStatus
|
|
INTEGER
|
|
}
|
|
|
|
modemIndex OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
local(1),
|
|
remote(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Value represents UNIT:
|
|
1 for local;
|
|
2 for remote."
|
|
::= { modemEntry 1 }
|
|
|
|
modemGeneralStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "A General status of each modem:
|
|
1 - 'OK';
|
|
2 - 'error'"
|
|
::= { modemEntry 2 }
|
|
|
|
modemBandwith OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Modem bandwidth set in KHz."
|
|
::= { modemEntry 3 }
|
|
|
|
modemE1T1Channels OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Number of E1 or T1 channels set."
|
|
::= { modemEntry 4 }
|
|
|
|
|
|
modemModulation OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
qpsk(1),
|
|
psk8(2),
|
|
qam16(3),
|
|
qam32(4),
|
|
qam64(5),
|
|
qam128(6),
|
|
qam256(7),
|
|
qpsklimited(8),
|
|
wqpsk(9),
|
|
wpsk8(10),
|
|
wqam16(11),
|
|
wqam32(12),
|
|
wqam64(13),
|
|
wqam128(14),
|
|
wqam256(15),
|
|
acmqpsk(17),
|
|
acmpsk8(18),
|
|
acmqam16(19),
|
|
acmqam32(20),
|
|
acmqam64(21),
|
|
acmqam128(22),
|
|
acmqam256(23),
|
|
acmwqpsk(25),
|
|
acmwpsk8(26),
|
|
acmwqam16(27),
|
|
acmwqam32(28),
|
|
acmwqam64(29),
|
|
acmwqam128(30),
|
|
acmwqam256(31),
|
|
qam4(33),
|
|
qam8(34),
|
|
qam4limited(40),
|
|
wqam4(41),
|
|
wqam8(42),
|
|
acmqam4(49),
|
|
acmqam8(50),
|
|
acmwqam4(57),
|
|
acmwqam8(58)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Modem modulation set.
|
|
Modulution values are
|
|
following: QPSK - 1, 8PSK - 2, 16QAM - 3,
|
|
32QAM - 4, 64QAM - 5, 128QAM - 6,
|
|
256QAM - 7.
|
|
The combination of wide band and ACM calculates as
|
|
(modulation + 8*is_wide + 16*is_ACM).
|
|
Note: not all of listed modulations supported by hardware.
|
|
Plese check manual."
|
|
::= { modemEntry 5 }
|
|
|
|
modemTotalCapacity OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Total capacity set in Kbps."
|
|
::= { modemEntry 6 }
|
|
|
|
modemEthernetCapacity OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Ethernet capacity set in Kbps."
|
|
::= { modemEntry 7 }
|
|
|
|
modemAcqStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION " "
|
|
::= { modemEntry 8 }
|
|
|
|
modemLastAcqError OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
success(1),
|
|
erragc(2),
|
|
errtiming(3),
|
|
errfreqsweep(4),
|
|
errmse(5),
|
|
errbit(6),
|
|
errservice(7),
|
|
errblind(8),
|
|
errtimeout(9),
|
|
errstopped(10),
|
|
errfatal(11)
|
|
}
|
|
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION " "
|
|
::= { modemEntry 9 }
|
|
|
|
modemRadialMSE OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Radial mean square error value *10 in dB.
|
|
Radial MSE is a method for estimating the
|
|
signal to noise ratio. ACM engine uses
|
|
normalized MSE, which is the inverse of SNR.
|
|
It is calculated by dividing the estimated
|
|
MSE level with the energy of the received
|
|
constellation. Radial MSE peak value threshold
|
|
is dependent on modulation used and LDPC
|
|
code rate.
|
|
In case of QPSK it is -8 dB (-10.5 for 'wide'),
|
|
16APSK - -13 dB (-18 for 'wide') and
|
|
32APSK - -15.5 dB (-21.5 for 'wide'). If the
|
|
value trespasses this threshold, BER at the
|
|
output of LDPC decoder will reach the value
|
|
of 1.0e-06."
|
|
::= { modemEntry 10 }
|
|
|
|
modemInternalAGCgain OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION " dBm "
|
|
::= { modemEntry 11 }
|
|
|
|
modemCarrierOffset OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Carrier frequency offset in Hz."
|
|
::= { modemEntry 12 }
|
|
|
|
modemSymbolRateTx OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION " kHz "
|
|
::= { modemEntry 13 }
|
|
|
|
modemSymbolRateRx OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION " kHz "
|
|
::= { modemEntry 14 }
|
|
|
|
modemLDPCdecoderStress OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..255))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The load of LDPC (low-density
|
|
parity-check code) decoder.
|
|
The LDPC is monitored for the number
|
|
of errors being corrected on the input
|
|
of LDPC decoder.
|
|
LDPC stress value thresholds @ BER 1.0e-06:
|
|
- for standard settings ~4.0e-02;
|
|
- for 'wide' option ~ 1.0e-03.
|
|
As long as LDPC stress value is under the
|
|
specified thresholds, amount of errors (and
|
|
BER itself) on the output of LDPC remains
|
|
at zero level."
|
|
::= { modemEntry 15 }
|
|
|
|
modemACMengine OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
on(1),
|
|
off(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Status of ACM engine. When 'on',
|
|
value '1' is shown, when 'off' - value is '2'."
|
|
::= { modemEntry 16 }
|
|
|
|
modemACMmodulationMin OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
qpsk(1),
|
|
psk8(2),
|
|
qam16(3),
|
|
qam32(4),
|
|
qam64(5),
|
|
qam128(6),
|
|
qam256(7),
|
|
qpsklimited(8),
|
|
wqpsk(9),
|
|
wpsk8(10),
|
|
wqam16(11),
|
|
wqam32(12),
|
|
wqam64(13),
|
|
wqam128(14),
|
|
wqam256(15),
|
|
acmqpsk(17),
|
|
acmpsk8(18),
|
|
acmqam16(19),
|
|
acmqam32(20),
|
|
acmqam64(21),
|
|
acmqam128(22),
|
|
acmqam256(23),
|
|
acmwqpsk(25),
|
|
acmwpsk8(26),
|
|
acmwqam16(27),
|
|
acmwqam32(28),
|
|
acmwqam64(29),
|
|
acmwqam128(30),
|
|
acmwqam256(31),
|
|
qam4(33),
|
|
qam8(34),
|
|
qam4limited(40),
|
|
wqam4(41),
|
|
wqam8(42),
|
|
acmqam4(49),
|
|
acmqam8(50),
|
|
acmwqam4(57),
|
|
acmwqam8(58)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Modem modulation set.
|
|
Modulution values are
|
|
following: QPSK - 1, 8PSK - 2, 16QAM - 3,
|
|
32QAM - 4, 64QAM - 5, 128QAM - 6,
|
|
256QAM - 7.
|
|
The combination of wide band and ACM calculates as
|
|
(modulation + 8*is_wide + 16*is_ACM).
|
|
Note: not all of listed modulations supported by hardware.
|
|
Plese check manual."
|
|
::= { modemEntry 17}
|
|
--modemACMmodulationMin OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- ACCESS read-only
|
|
-- STATUS mandatory
|
|
-- DESCRIPTION "Modulation set by ACM."
|
|
-- ::= { modemEntry 17 }
|
|
|
|
modemACMtotalCapacity OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Total capacity in Kbps set by ACM."
|
|
::= { modemEntry 18 }
|
|
|
|
modemACMethernetCapacity OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Ethernet capacity in Kbps set by ACM."
|
|
::= { modemEntry 19 }
|
|
|
|
modemStandard OBJECT-TYPE -- from version 1.20
|
|
SYNTAX INTEGER{
|
|
etsi(1),
|
|
ansi(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Modem operational standard ETSI or ANSI"
|
|
::= { modemEntry 20 }
|
|
|
|
modemE1T1ChannelMask OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "E1 or T1 channel mask 0x00 - 0x0f"
|
|
::= { modemEntry 21 }
|
|
|
|
modemACMmodulationMax OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
qpsk(1),
|
|
psk8(2),
|
|
qam16(3),
|
|
qam32(4),
|
|
qam64(5),
|
|
qam128(6),
|
|
qam256(7),
|
|
qpsklimited(8),
|
|
wqpsk(9),
|
|
wpsk8(10),
|
|
wqam16(11),
|
|
wqam32(12),
|
|
wqam64(13),
|
|
wqam128(14),
|
|
wqam256(15),
|
|
acmqpsk(17),
|
|
acmpsk8(18),
|
|
acmqam16(19),
|
|
acmqam32(20),
|
|
acmqam64(21),
|
|
acmqam128(22),
|
|
acmqam256(23),
|
|
acmwqpsk(25),
|
|
acmwpsk8(26),
|
|
acmwqam16(27),
|
|
acmwqam32(28),
|
|
acmwqam64(29),
|
|
acmwqam128(30),
|
|
acmwqam256(31),
|
|
qam4(33),
|
|
qam8(34),
|
|
qam4limited(40),
|
|
wqam4(41),
|
|
wqam8(42),
|
|
acmqam4(49),
|
|
acmqam8(50),
|
|
acmwqam4(57),
|
|
acmwqam8(58)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Modem modulation set.
|
|
Modulution values are
|
|
following: QPSK - 1, 8PSK - 2, 16QAM - 3,
|
|
32QAM - 4, 64QAM - 5, 128QAM - 6,
|
|
256QAM - 7.
|
|
The combination of wide band and ACM calculates as
|
|
(modulation + 8*is_wide + 16*is_ACM).
|
|
Note: as PSK modulations are now physicaly deprecated,
|
|
theese are replased with QAM, so for new QAM modulations
|
|
there are modificatior +32.
|
|
Note: not all of listed modulations supported by hardware.
|
|
Plese check manual."
|
|
::= { modemEntry 22}
|
|
|
|
|
|
modemRowStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
active(1),
|
|
notReady(3),
|
|
undo(4)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Row status - to update written data for
|
|
modemBandwith,
|
|
modemACMmodulationMin,
|
|
modemACMmodulationMax,
|
|
modemE1T1ChannelMask. "
|
|
::= { modemEntry 23 }
|
|
|
|
--modemACMprofileTx OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- ACCESS read-only
|
|
-- STATUS optional
|
|
-- DESCRIPTION "Tx ACM profile."
|
|
-- ::= { modemEntry 21 }
|
|
|
|
--modemACMprofileRx OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- ACCESS read-only
|
|
-- STATUS optional
|
|
-- DESCRIPTION "Rx ACM profile."
|
|
-- ::= { modemEntry 22 }
|
|
|
|
--modemRxFrequencyOffset OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- ACCESS read-only
|
|
-- STATUS optional
|
|
-- DESCRIPTION "Rx frequency offset in KHz."
|
|
-- ::= { modemEntry 23 }
|
|
|
|
--modemTxFrequencyOffset OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- ACCESS read-only
|
|
-- STATUS optional
|
|
-- DESCRIPTION "Tx frequency offset in KHz."
|
|
-- ::= { modemEntry 24 }
|
|
-- vlan 2008.10.04
|
|
|
|
vlansEnabled OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2),
|
|
reset(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"unit temperature *10 degrees Celsius"
|
|
::= { ipRadioCfgGeneral 13 }
|
|
|
|
--
|
|
vlanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF VlanEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Vlan table"
|
|
::= { ipRadioCfgGeneral 14 }
|
|
|
|
vlanEntry OBJECT-TYPE
|
|
SYNTAX VlanEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"entry containing vlan objects"
|
|
AUGMENTS { ifEntry }
|
|
::= { vlanTable 1 }
|
|
|
|
VlanEntry ::=
|
|
SEQUENCE {
|
|
vlanNumber INTEGER,
|
|
vlanPortType INTEGER,
|
|
vlanPortmap INTEGER,
|
|
vlanFid INTEGER,
|
|
vlanCfgStat INTEGER,
|
|
vlanRowStatus INTEGER
|
|
}
|
|
|
|
vlanNumber OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A unique value for each vlan. "
|
|
::= { vlanEntry 1 }
|
|
|
|
vlanPortType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
management(1),
|
|
none(2),
|
|
traffic(3),
|
|
endpoint(4)
|
|
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"VLAN port type
|
|
management, traffic or endpoint
|
|
"
|
|
::= { vlanEntry 2 }
|
|
|
|
vlanPortmap OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"display port bindings
|
|
bitfield 111(bin)
|
|
"
|
|
::= { vlanEntry 3 }
|
|
|
|
vlanFid OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"a filtering identifier (assigned automagically)"
|
|
::= { vlanEntry 4 }
|
|
|
|
vlanCfgStat OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2),
|
|
clear(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"enable/disable vlan # or clear row data"
|
|
::= { vlanEntry 5 }
|
|
|
|
vlanRowStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
active(1),
|
|
notReady(3),
|
|
undo(4)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Row status (execute configuration on active)
|
|
Changing any table value sets this value into
|
|
state notReady. To update row status write value
|
|
active(1) into this variable."
|
|
::= { vlanEntry 6 }
|
|
|
|
|
|
--
|
|
-- Eth
|
|
--
|
|
ethRXTruncatedFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Number of truncated received frames since
|
|
unit start or statistics reset. "
|
|
::= { ipRadioStatEth 1 }
|
|
|
|
ethRXLongEvents OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Number of frames having byte count greater
|
|
than MAXIMUM FRAME SIZE parameter (1518,
|
|
1536 or 1916 bytes) since unit start or
|
|
statistics reset."
|
|
::= { ipRadioStatEth 2 }
|
|
|
|
ethRXVlanTagsDetected OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Number of VLAN Tags detected since unit
|
|
start or statistics reset."
|
|
::= { ipRadioStatEth 3 }
|
|
|
|
ethRXUnsupOpcodes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Number of frames recognized as control frames
|
|
but contained an Unknown Opcode since unit
|
|
start or statistics reset."
|
|
::= { ipRadioStatEth 4 }
|
|
|
|
ethRXPauseFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Number of frames received as control frames
|
|
with valid PAUSE opcodes since unit start or
|
|
statistics reset."
|
|
::= { ipRadioStatEth 5 }
|
|
|
|
ethRXControlFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Number of frames received as control frames
|
|
since unit start or statistics reset."
|
|
::= { ipRadioStatEth 6 }
|
|
|
|
ethRXDribleNibbles OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Indicates that following the end of the
|
|
packet additional 1 to 7 bits are received.
|
|
A single nibble, named the dribble nibble,
|
|
is formed but not sent to the system;"
|
|
::= { ipRadioStatEth 7 }
|
|
|
|
ethRXBroadcasts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Number of packets, which destination
|
|
address contained broadcast address,
|
|
since unit start or statiistics reset."
|
|
::= { ipRadioStatEth 8 }
|
|
|
|
ethRXMulticasts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Number of packets, which destination
|
|
address contained multicast address since
|
|
unit start or statistics reset."
|
|
::= { ipRadioStatEth 9 }
|
|
|
|
ethRXDones OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Reception of packets successfully
|
|
completed. Number of completed packets
|
|
since unit start or statistics reset."
|
|
::= { ipRadioStatEth 10 }
|
|
|
|
ethRXOutOfRangeErrors OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Number of frames where Type/Length field
|
|
larger than 1518 (Type Field) bytes since
|
|
unit start or statistics reset."
|
|
::= { ipRadioStatEth 11 }
|
|
|
|
ethRXLengthCheckerrorsErrors OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Number of frames where frame length field
|
|
in the packet does not match the actual data
|
|
byte length and is not a Type Field since
|
|
unit start or statistics reset."
|
|
::= { ipRadioStatEth 12 }
|
|
|
|
ethRXCRCErrors OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Number of frames where frame CRC do not
|
|
match the internally generated CRC since
|
|
unit start or statistics reset"
|
|
::= { ipRadioStatEth 13 }
|
|
|
|
ethRXCodeErrors OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Number of packets where one or more nibbles
|
|
are signalled as errors during reception of
|
|
the packet since unit start or statistics
|
|
reset."
|
|
::= { ipRadioStatEth 14 }
|
|
|
|
ethRXFalseCarrierErrors OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Indicates that following the last receive
|
|
statistics vector, a false carrier was
|
|
detected, noted and reported with this the
|
|
next receive statistics. The false carrier
|
|
is not associated with this packet. False
|
|
carrier is activated on the receive channel
|
|
that does not result in a packet receive
|
|
attempt being made;"
|
|
::= { ipRadioStatEth 15 }
|
|
|
|
ethRXDvEvent OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Number of the last receive (Rx) events seen
|
|
being too short to be valid packets since the
|
|
last unit (re)start or purification of
|
|
statistics."
|
|
::= { ipRadioStatEth 16 }
|
|
|
|
ethRXPrevPktDropped OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Indicates that since the last receive (Rx),
|
|
a packet is dropped (i.e. interframe gap
|
|
too small)."
|
|
::= { ipRadioStatEth 17 }
|
|
|
|
ethRXByteCounterHi OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Total number of bytes received (Rx) on the
|
|
wire since the last unit (re)start or
|
|
purification of statistics, not counting
|
|
collided bytes (bits 31:0)."
|
|
::= { ipRadioStatEth 18 }
|
|
|
|
ethRXByteCounterLow OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Total number of bytes received (Rx) on the
|
|
wire since the last unit (re)start or
|
|
purification of statistics, not counting
|
|
collided bytes (bits 62:32)."
|
|
::= { ipRadioStatEth 19 }
|
|
|
|
--Counter64 data type is unsupported by SMIv1. Not expected
|
|
--ethRXByteCounter64b OBJECT-TYPE
|
|
-- SYNTAX Counter64
|
|
-- ACCESS read-only
|
|
-- STATUS optional
|
|
-- DESCRIPTION "Total number of bytes received (Rx) on the
|
|
-- wire since the last unit (re)start or
|
|
-- purification of statistics, not counting
|
|
-- collided bytes."
|
|
-- ::= { ipRadioStatEth 20 }
|
|
|
|
ethTXVlanTags OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Number of VLAN tagged Tx packets since the
|
|
last unit (re)start or purification of
|
|
statistics. 32-bit counter."
|
|
::= { ipRadioStatEth 21 }
|
|
|
|
ethTXBackpresEvents OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Number of times Tx carrier-sense-method
|
|
backpressure was previously applied since the
|
|
last unit (re)start or purification of
|
|
statistics."
|
|
::= { ipRadioStatEth 22 }
|
|
|
|
ethTXPauseFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Number of frames transmitted (Tx) as control
|
|
frames with valid PAUSE opcodes since the last
|
|
unit (re)start or purification of statistics."
|
|
::= { ipRadioStatEth 23 }
|
|
|
|
ethTXControlFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Number of frames transmitted (Tx) as control
|
|
frames since the last unit (re)start or
|
|
purification of statistics."
|
|
::= { ipRadioStatEth 24 }
|
|
|
|
ethTXWireByteCounterHi OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Total number of bytes transmitted (Tx)
|
|
on the wire since the last unit (re)start
|
|
or purification of statistics, including
|
|
all bytes from collided attempts
|
|
(bits 31:0)."
|
|
::= { ipRadioStatEth 25 }
|
|
|
|
ethTXWireByteCounterLow OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Total number of bytes transmitted (Tx)
|
|
on the wire since the last unit (re)start
|
|
or purification of statistics, including
|
|
all bytes from collided attempts
|
|
(bits 62:32)."
|
|
::= { ipRadioStatEth 26 }
|
|
|
|
--Counter64 data type is unsupported by SMIv1. Not expected
|
|
--ethTXWireByteCounter64b OBJECT-TYPE
|
|
-- SYNTAX Counter64
|
|
-- ACCESS read-only
|
|
-- STATUS optional
|
|
-- DESCRIPTION "Total number of bytes transmitted (Tx)
|
|
-- on the wire since the last unit (re)start
|
|
-- or purification of statistics, including
|
|
-- all bytes from collided attempts."
|
|
-- ::= { ipRadioStatEth 27 }
|
|
|
|
ethTXUnderruns OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Number of underruns occured during frame
|
|
transmission (Tx) since the last unit
|
|
(re)start or purification of statistics."
|
|
::= { ipRadioStatEth 28 }
|
|
|
|
ethTXGiants OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Number of Tx frames having byte count
|
|
greater than the MAXIMUM FRAME SIZE
|
|
parameter (1516, 1536 or 1916 bytes)
|
|
since the last unit (re)start or
|
|
purification of statistics."
|
|
::= { ipRadioStatEth 29 }
|
|
|
|
ethTXLateCollisions OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Number of Tx collisions occurred beyond
|
|
the collision window (512 bit times) since
|
|
the last unit (re)start or purification
|
|
of statistics."
|
|
::= { ipRadioStatEth 30 }
|
|
|
|
ethTXMaxCollisions OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Number of Tx packets aborted after number
|
|
of collisions exceeded the RETRANSMISSION
|
|
MAXIMUM parameter since the last unit
|
|
(re)start or purification of statistics."
|
|
::= { ipRadioStatEth 31 }
|
|
|
|
ethTXExcessiveDefers OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Number of Tx packets deferred in excess
|
|
of 6,071 nibble times in 100 Mbps mode,
|
|
or 24,287 bit-times in 10 Mbps mode since
|
|
the last unit (re)start or purification
|
|
of statistics."
|
|
::= { ipRadioStatEth 32 }
|
|
|
|
ethTXNonExcessiveDefers OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Number of Tx packets deferred for at
|
|
least one attempt, but less than an
|
|
excessive defer since the last unit
|
|
(re)start or purification of statistics."
|
|
::= { ipRadioStatEth 33 }
|
|
|
|
ethTXBroadcasts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Number of Tx packets since the last unit
|
|
(re)start or purification of statistics,
|
|
which destination address contained
|
|
broadcast address."
|
|
::= { ipRadioStatEth 34 }
|
|
|
|
ethTXMulticasts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Number of Tx packets since the last unit
|
|
(re)start or purification of statistics,
|
|
which destination address contained
|
|
multicast address."
|
|
::= { ipRadioStatEth 35 }
|
|
|
|
ethTXDones OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Number of packets successfully transmitted
|
|
(Tx) since the last unit (re)start or
|
|
purification of statistics."
|
|
::= { ipRadioStatEth 36 }
|
|
|
|
-- ethTXOutOfRangeErrors OBJECT-TYPE
|
|
-- SYNTAX Counter
|
|
-- ACCESS read-only
|
|
-- STATUS obsolete
|
|
-- DESCRIPTION "Number of Tx frames since the last unit
|
|
-- (re)start or purification of statistics
|
|
-- where Type/Length field larger than 1518
|
|
-- (Type Field) bytes."
|
|
-- ::= { ipRadioStatEth 37 }
|
|
|
|
ethTXLengthCheckErrors OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Number of Tx frames since the last unit
|
|
(re)start or purification of statistics,
|
|
where length field in the packet does not
|
|
match the actual data byte length and is
|
|
not a Type Field"
|
|
::= { ipRadioStatEth 38 }
|
|
|
|
ethTXCRCErrors OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Number of Tx frames since the last unit
|
|
(re)start or purification of statistics,
|
|
where CRC does not match the internally
|
|
generated CRC."
|
|
::= { ipRadioStatEth 39 }
|
|
|
|
ethTXCollisions OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Number of collisions the current packet
|
|
incurred during transmission (Tx) attempts.
|
|
Note: Bits 19 through 16 are the collision
|
|
count on any successfully transmitted packet
|
|
and as such will not show the possible maximum
|
|
count of 16 collisions."
|
|
::= { ipRadioStatEth 40 }
|
|
|
|
ethTXByteCounterHi OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Total count of bytes transmitted (Tx)
|
|
on the wire not including collided bytes
|
|
(bits 31:0) since the last unit (re)start
|
|
or purification of statistics."
|
|
::= { ipRadioStatEth 41 }
|
|
|
|
ethTXByteCounterLow OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Total count of bytes transmitted (Tx)
|
|
on the wire not including collided bytes
|
|
(bits 62:32) since the last unit (re)start
|
|
or purification of statistics."
|
|
::= { ipRadioStatEth 42 }
|
|
|
|
--Counter64 data type is unsupported by SMIv1. Not expected
|
|
--ethTXByteCounter64b OBJECT-TYPE
|
|
-- SYNTAX Counter64
|
|
-- ACCESS read-only
|
|
-- STATUS optional
|
|
-- DESCRIPTION "Total count of bytes transmitted (Tx) on
|
|
-- the wire not including collided bytes
|
|
-- since the last unit (re)start or
|
|
-- purification of statistics."
|
|
-- ::= { ipRadioStatEth 43 }
|
|
|
|
ethGFPFCSErrors OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Number of generic framing procedure (GFP)
|
|
frames with CRC errors received by the
|
|
de-encapsulation block since the last unit
|
|
(re)start or purification of statistics."
|
|
::= { ipRadioStatEth 44 }
|
|
|
|
ethGFPCHECErrors OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Number of generic framing procedure (GFP)
|
|
frames with CHEC errors received by the
|
|
de-encapsulation block since the last unit
|
|
(re)start or purification of statistics."
|
|
::= { ipRadioStatEth 45 }
|
|
|
|
ethGFPDropedFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Number of generic framing procedure (GFP)
|
|
frames that were dropped in the de-encapsulation
|
|
block since the last unit (re)start or
|
|
purification of statistics."
|
|
::= { ipRadioStatEth 46 }
|
|
|
|
ethGFPDelineationErrors OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Number of 'lost of synchronization' events since
|
|
the last unit (re)start or purification of
|
|
statistics."
|
|
::= { ipRadioStatEth 47 }
|
|
|
|
ethQOSRXQ1Frames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Number of frames received on Q1 since the last unit
|
|
(re)start or purification of statistics."
|
|
::= { ipRadioStatEth 48 }
|
|
|
|
ethQOSRXQ1Dropped OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Number of frames dropped on Q1 since the last unit
|
|
(re)start or purification of statistics."
|
|
::= { ipRadioStatEth 49 }
|
|
|
|
ethQOSRXQ2Frames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Number of frames received on Q2 since the last unit
|
|
(re)start or purification of statistics."
|
|
::= { ipRadioStatEth 50 }
|
|
|
|
ethQOSRXQ2Dropped OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Number of frames dropped on Q2 since the last unit
|
|
(re)start or purification of statistics."
|
|
::= { ipRadioStatEth 51 }
|
|
|
|
ethQOSTXFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Number of frames passed through TX FIFO since the
|
|
last unit (re)start or purification of statistics."
|
|
::= { ipRadioStatEth 52 }
|
|
|
|
ethQOSTXDropped OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Number of frames dropped in TX FIFO since the last
|
|
unit (re)start or purification of statistics."
|
|
::= { ipRadioStatEth 53 }
|
|
|
|
e1t1StatTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF E1t1StatEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"E1 (T1) status Table."
|
|
::= { ipRadioStat 3 }
|
|
|
|
e1t1StatEntry OBJECT-TYPE
|
|
SYNTAX E1t1StatEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Entry containing objects in E1 (T1) table"
|
|
AUGMENTS { ifEntry }
|
|
::= { e1t1StatTable 1 }
|
|
E1t1StatEntry ::=
|
|
SEQUENCE {
|
|
e1t1LOS INTEGER,
|
|
e1t1AIS INTEGER,
|
|
e1t1ChannelNr INTEGER -- 2009.07.13.
|
|
}
|
|
|
|
e1t1LOS OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
on(1),
|
|
off(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"if signal loss present"
|
|
::= { e1t1StatEntry 1 }
|
|
|
|
e1t1AIS OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
on(1),
|
|
off(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"if AIS present"
|
|
::= { e1t1StatEntry 2 }
|
|
|
|
e1t1ChannelNr OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"e1 channel number (it is not associated with interface number - ifEntry)"
|
|
::= { e1t1StatEntry 3 }
|
|
|
|
--modemStatistics
|
|
|
|
-- Modem_Count_Time
|
|
modemCountTime OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Count time in seconds"
|
|
::= { modemStatistics 1 }
|
|
|
|
modemErroredBlock OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Errored block"
|
|
::= { modemStatistics 2 }
|
|
|
|
modemErroredSecond OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Errored second"
|
|
::= { modemStatistics 3 }
|
|
|
|
modemSeverelyErroredSecond OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Severely errored second"
|
|
::= { modemStatistics 4 }
|
|
|
|
modemBackgroundBlockErrror OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Background Block Error"
|
|
::= { modemStatistics 5 }
|
|
|
|
modemTotalBlockNumber OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Total Block Number"
|
|
::= { modemStatistics 6 }
|
|
|
|
|
|
modemErroredSecondRatio OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Errored Second Ratio"
|
|
::= { modemStatistics 7 }
|
|
|
|
modemSeverelyErroredSecondRatio OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Severely Errored Second Ratio"
|
|
::= { modemStatistics 8 }
|
|
|
|
modemBackgroundBlockErrorRatio OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Background Block Error Ratio"
|
|
::= { modemStatistics 9 }
|
|
|
|
modemUptime OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Uptime (s)"
|
|
::= { modemStatistics 10 }
|
|
|
|
modemUnavailtime OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Unavailtime (s)"
|
|
::= { modemStatistics 11 }
|
|
|
|
--
|
|
END
|