785 lines
35 KiB
Plaintext
785 lines
35 KiB
Plaintext
-- These MIBs were created on 1/2/2003
|
|
-- This module defines enterprise MIBs for NS BGP
|
|
--
|
|
-- Copyright (c) 1999-2004, Juniper Networks, Inc.
|
|
-- All rights reserved.
|
|
|
|
NETSCREEN-BGP4-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
|
|
IpAddress, Integer32, Counter32, Gauge32
|
|
FROM SNMPv2-SMI
|
|
netscreenTrapDesc, netscreenTrapType
|
|
FROM NETSCREEN-TRAP-MIB
|
|
netscreenVR
|
|
FROM NETSCREEN-SMI;
|
|
|
|
nsBgp MODULE-IDENTITY
|
|
LAST-UPDATED "200506032022Z" -- June 20, 2005
|
|
ORGANIZATION
|
|
"Juniper Networks, Inc."
|
|
CONTACT-INFO
|
|
"Customer Support
|
|
|
|
1194 North Mathilda Avenue
|
|
Sunnyvale, California 94089-1206
|
|
USA
|
|
|
|
Tel: 1-800-638-8296
|
|
E-mail: customerservice@juniper.net
|
|
HTTP://www.juniper.net"
|
|
DESCRIPTION
|
|
"The MIB module for NS-BGP-4."
|
|
::= { netscreenVR 3 }
|
|
|
|
-- BGP Info table. This table contains, one entry per
|
|
-- VR, information about the BGP's Version, LocalAs and Identifier.
|
|
|
|
nsBgpInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NsBgpInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"BGP info table. This table contains,
|
|
one entry per VR, information about
|
|
the BGP's Version, LocalAs and Identifier."
|
|
::= { nsBgp 1 }
|
|
|
|
nsBgpInfoEntry OBJECT-TYPE
|
|
SYNTAX NsBgpInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Entry containing information about the
|
|
BGP's Version, LocalAs and Identifier"
|
|
INDEX { nsBgpInfoVRID }
|
|
::= { nsBgpInfoTable 1 }
|
|
|
|
NsBgpInfoEntry ::= SEQUENCE {
|
|
nsBgpInfoVersion
|
|
OCTET STRING,
|
|
nsBgpInfoLocalAs
|
|
INTEGER,
|
|
nsBgpInfoIdentifier
|
|
IpAddress,
|
|
nsBgpInfoVRID
|
|
INTEGER
|
|
}
|
|
|
|
nsBgpInfoVersion OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..255))
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Vector of supported BGP protocol version
|
|
numbers. Each peer negotiates the version
|
|
from this vector. Versions are identified
|
|
via the string of bits contained within this
|
|
object. The first octet contains bits 0 to
|
|
7, the second octet contains bits 8 to 15,
|
|
and so on, with the most significant bit
|
|
referring to the lowest bit number in the
|
|
octet (e.g., the MSB of the first octet
|
|
refers to bit 0). If a bit, i, is present
|
|
and set, then the version (i+1) of the BGP
|
|
is supported."
|
|
::= { nsBgpInfoEntry 1 }
|
|
|
|
nsBgpInfoLocalAs OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The local autonomous system number."
|
|
::= { nsBgpInfoEntry 2 }
|
|
|
|
nsBgpInfoIdentifier OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The BGP Identifier of local system."
|
|
::= { nsBgpInfoEntry 3 }
|
|
|
|
nsBgpInfoVRID OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Virtual Router ID"
|
|
::= { nsBgpInfoEntry 4 }
|
|
|
|
-- BGP Peer table. This table contains, one entry per
|
|
-- BGP peer, information about the BGP peer.
|
|
|
|
nsBgpPeerTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NsBgpPeerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"BGP peer table. This table contains,
|
|
one entry per BGP peer, information about
|
|
the connections with BGP peers."
|
|
::= { nsBgp 3 }
|
|
|
|
nsBgpPeerEntry OBJECT-TYPE
|
|
SYNTAX NsBgpPeerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Entry containing information about the
|
|
connection with a BGP peer."
|
|
INDEX { nsBgpPeerRemoteAddr,
|
|
nsBgpPeerVRID }
|
|
::= { nsBgpPeerTable 1 }
|
|
|
|
NsBgpPeerEntry ::= SEQUENCE {
|
|
nsBgpPeerIdentifier
|
|
IpAddress,
|
|
nsBgpPeerState
|
|
INTEGER,
|
|
nsBgpPeerAdminStatus
|
|
INTEGER,
|
|
nsBgpPeerNegotiatedVersion
|
|
Integer32,
|
|
nsBgpPeerLocalAddr
|
|
IpAddress,
|
|
nsBgpPeerLocalPort
|
|
INTEGER,
|
|
nsBgpPeerRemoteAddr
|
|
IpAddress,
|
|
nsBgpPeerRemotePort
|
|
INTEGER,
|
|
nsBgpPeerRemoteAs
|
|
INTEGER,
|
|
nsBgpPeerInUpdates
|
|
Counter32,
|
|
nsBgpPeerOutUpdates
|
|
Counter32,
|
|
nsBgpPeerInTotalMessages
|
|
Counter32,
|
|
nsBgpPeerOutTotalMessages
|
|
Counter32,
|
|
nsBgpPeerLastError
|
|
OCTET STRING,
|
|
nsBgpPeerFsmEstablishedTransitions
|
|
Counter32,
|
|
nsBgpPeerFsmEstablishedTime
|
|
Gauge32,
|
|
nsBgpPeerConnectRetryInterval
|
|
INTEGER,
|
|
nsBgpPeerHoldTime
|
|
INTEGER,
|
|
nsBgpPeerKeepAlive
|
|
|
|
INTEGER,
|
|
nsBgpPeerHoldTimeConfigured
|
|
INTEGER,
|
|
nsBgpPeerKeepAliveConfigured
|
|
INTEGER,
|
|
nsBgpPeerMinASOriginationInterval
|
|
INTEGER,
|
|
nsBgpPeerMinRouteAdvertisementInterval
|
|
INTEGER,
|
|
nsBgpPeerInUpdateElapsedTime
|
|
Gauge32,
|
|
nsBgpPeerVRID
|
|
INTEGER
|
|
}
|
|
|
|
nsBgpPeerIdentifier OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The BGP Identifier of this entry's BGP
|
|
peer."
|
|
::= { nsBgpPeerEntry 1 }
|
|
|
|
nsBgpPeerState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
idle(1),
|
|
connect(2),
|
|
active(3),
|
|
opensent(4),
|
|
openconfirm(5),
|
|
established(6)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The BGP peer connection state."
|
|
::= { nsBgpPeerEntry 2 }
|
|
|
|
nsBgpPeerAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
stop(1),
|
|
start(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The desired state of the BGP connection.
|
|
A transition from 'stop' to 'start' will
|
|
cause the BGP Start Event to be generated.
|
|
|
|
A transition from 'start' to 'stop' will
|
|
cause the BGP Stop Event to be generated.
|
|
This parameter can be used to restart BGP
|
|
peer connections. Care should be used in
|
|
providing write access to this object
|
|
without adequate authentication."
|
|
::= { nsBgpPeerEntry 3 }
|
|
|
|
nsBgpPeerNegotiatedVersion OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The negotiated version of BGP running
|
|
between the two peers."
|
|
::= { nsBgpPeerEntry 4 }
|
|
|
|
nsBgpPeerLocalAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The local IP address of this entry's BGP
|
|
connection."
|
|
::= { nsBgpPeerEntry 5 }
|
|
|
|
nsBgpPeerLocalPort OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The local port for the TCP connection
|
|
between the BGP peers."
|
|
::= { nsBgpPeerEntry 6 }
|
|
|
|
nsBgpPeerRemoteAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The remote IP address of this entry's BGP
|
|
peer."
|
|
::= { nsBgpPeerEntry 7 }
|
|
|
|
nsBgpPeerRemotePort OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
|
|
DESCRIPTION
|
|
"The remote port for the TCP connection
|
|
between the BGP peers. Note that the
|
|
objects nsBgpPeerLocalAddr,
|
|
nsBgpPeerLocalPort, nsBgpPeerRemoteAddr and
|
|
nsBgpPeerRemotePort provide the appropriate
|
|
reference to the standard MIB TCP
|
|
connection table."
|
|
::= { nsBgpPeerEntry 8 }
|
|
|
|
nsBgpPeerRemoteAs OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The remote autonomous system number."
|
|
::= { nsBgpPeerEntry 9 }
|
|
|
|
nsBgpPeerInUpdates OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The number of BGP UPDATE messages
|
|
received on this connection. This object
|
|
should be initialized to zero (0) when the
|
|
connection is established."
|
|
::= { nsBgpPeerEntry 10 }
|
|
|
|
nsBgpPeerOutUpdates OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The number of BGP UPDATE messages
|
|
transmitted on this connection. This
|
|
object should be initialized to zero (0)
|
|
when the connection is established."
|
|
::= { nsBgpPeerEntry 11 }
|
|
|
|
nsBgpPeerInTotalMessages OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The total number of messages received
|
|
from the remote peer on this connection.
|
|
This object should be initialized to zero
|
|
|
|
when the connection is established."
|
|
::= { nsBgpPeerEntry 12 }
|
|
|
|
nsBgpPeerOutTotalMessages OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The total number of messages transmitted to
|
|
the remote peer on this connection. This
|
|
object should be initialized to zero when
|
|
the connection is established."
|
|
::= { nsBgpPeerEntry 13 }
|
|
|
|
nsBgpPeerLastError OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (2))
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The last error code and subcode seen by this
|
|
peer on this connection. If no error has
|
|
occurred, this field is zero. Otherwise, the
|
|
first byte of this two byte OCTET STRING
|
|
contains the error code, and the second byte
|
|
contains the subcode."
|
|
::= { nsBgpPeerEntry 14 }
|
|
|
|
nsBgpPeerFsmEstablishedTransitions OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The total number of times the BGP FSM
|
|
transitioned into the established state."
|
|
::= { nsBgpPeerEntry 15 }
|
|
|
|
nsBgpPeerFsmEstablishedTime OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This timer indicates how long (in
|
|
seconds) this peer has been in the
|
|
Established state or how long
|
|
since this peer was last in the
|
|
Established state. It is set to zero when
|
|
a new peer is configured or the router is
|
|
booted."
|
|
|
|
::= { nsBgpPeerEntry 16 }
|
|
|
|
nsBgpPeerConnectRetryInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Time interval in seconds for the
|
|
ConnectRetry timer. The suggested value
|
|
for this timer is 120 seconds."
|
|
::= { nsBgpPeerEntry 17 }
|
|
|
|
nsBgpPeerHoldTime OBJECT-TYPE
|
|
SYNTAX INTEGER ( 0 | 3..65535 )
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Time interval in seconds for the Hold
|
|
Timer established with the peer. The
|
|
value of this object is calculated by this
|
|
BGP speaker by using the smaller of the
|
|
value in nsBgpPeerHoldTimeConfigured and the
|
|
Hold Time received in the OPEN message.
|
|
This value must be at lease three seconds
|
|
if it is not zero (0) in which case the
|
|
Hold Timer has not been established with
|
|
the peer, or, the value of
|
|
nsBgpPeerHoldTimeConfigured is zero (0)."
|
|
::= { nsBgpPeerEntry 18 }
|
|
|
|
nsBgpPeerKeepAlive OBJECT-TYPE
|
|
SYNTAX INTEGER ( 0 | 1..21845 )
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Time interval in seconds for the KeepAlive
|
|
timer established with the peer. The value
|
|
of this object is calculated by this BGP
|
|
speaker such that, when compared with
|
|
nsBgpPeerHoldTime, it has the same
|
|
proportion as what
|
|
nsBgpPeerKeepAliveConfigured has when
|
|
compared with nsBgpPeerHoldTimeConfigured.
|
|
If the value of this object is zero (0),
|
|
it indicates that the KeepAlive timer has
|
|
not been established with the peer, or,
|
|
the value of nsBgpPeerKeepAliveConfigured is
|
|
zero (0)."
|
|
|
|
::= { nsBgpPeerEntry 19 }
|
|
|
|
nsBgpPeerHoldTimeConfigured OBJECT-TYPE
|
|
SYNTAX INTEGER ( 0 | 3..65535 )
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Time interval in seconds for the Hold Time
|
|
configured for this BGP speaker with this
|
|
peer. This value is placed in an OPEN
|
|
message sent to this peer by this BGP
|
|
speaker, and is compared with the Hold
|
|
Time field in an OPEN message received
|
|
from the peer when determining the Hold
|
|
Time (nsBgpPeerHoldTime) with the peer.
|
|
This value must not be less than three
|
|
seconds if it is not zero (0) in which
|
|
case the Hold Time is NOT to be
|
|
established with the peer. The suggested
|
|
value for this timer is 90 seconds."
|
|
::= { nsBgpPeerEntry 20 }
|
|
|
|
nsBgpPeerKeepAliveConfigured OBJECT-TYPE
|
|
SYNTAX INTEGER ( 0 | 1..21845 )
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Time interval in seconds for the
|
|
KeepAlive timer configured for this BGP
|
|
speaker with this peer. The value of this
|
|
object will only determine the
|
|
KEEPALIVE messages' frequency relative to
|
|
the value specified in
|
|
nsBgpPeerHoldTimeConfigured; the actual
|
|
time interval for the KEEPALIVE messages
|
|
is indicated by nsBgpPeerKeepAlive. A
|
|
reasonable maximum value for this timer
|
|
would be configured to be one
|
|
third of that of
|
|
nsBgpPeerHoldTimeConfigured.
|
|
If the value of this object is zero (0),
|
|
no periodical KEEPALIVE messages are sent
|
|
to the peer after the BGP connection has
|
|
been established. The suggested value for
|
|
this timer is 30 seconds."
|
|
::= { nsBgpPeerEntry 21 }
|
|
|
|
nsBgpPeerMinASOriginationInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Time interval in seconds for the
|
|
MinASOriginationInterval timer.
|
|
The suggested value for this timer is 15
|
|
seconds."
|
|
::= { nsBgpPeerEntry 22 }
|
|
|
|
nsBgpPeerMinRouteAdvertisementInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Time interval in seconds for the
|
|
MinRouteAdvertisementInterval timer.
|
|
The suggested value for this timer is 30
|
|
seconds."
|
|
::= { nsBgpPeerEntry 23 }
|
|
|
|
nsBgpPeerInUpdateElapsedTime OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Elapsed time in seconds since the last BGP
|
|
UPDATE message was received from the peer.
|
|
Each time nsBgpPeerInUpdates is incremented,
|
|
the value of this object is set to zero
|
|
(0)."
|
|
::= { nsBgpPeerEntry 24 }
|
|
|
|
nsBgpPeerVRID OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Virtual Router ID"
|
|
::= { nsBgpPeerEntry 25 }
|
|
|
|
|
|
-- BGP-4 Received Path Attribute Table. This table
|
|
-- contains, one entry per path to a network, path
|
|
-- attributes received from all peers running BGP-4.
|
|
|
|
nsBgp4PathAttrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NsBgp4PathAttrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The BGP-4 Received Path Attribute Table
|
|
contains information about paths to
|
|
destination networks received from all
|
|
BGP4 peers."
|
|
::= { nsBgp 6 }
|
|
|
|
nsBgp4PathAttrEntry OBJECT-TYPE
|
|
SYNTAX NsBgp4PathAttrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Information about a path to a network."
|
|
INDEX { nsBgp4PathAttrIpAddrPrefix,
|
|
nsBgp4PathAttrIpAddrPrefixLen,
|
|
nsBgp4PathAttrPeer,
|
|
nsBgp4PathAttrVRID }
|
|
::= { nsBgp4PathAttrTable 1 }
|
|
|
|
NsBgp4PathAttrEntry ::= SEQUENCE {
|
|
nsBgp4PathAttrPeer
|
|
IpAddress,
|
|
nsBgp4PathAttrIpAddrPrefixLen
|
|
INTEGER,
|
|
nsBgp4PathAttrIpAddrPrefix
|
|
IpAddress,
|
|
nsBgp4PathAttrOrigin
|
|
INTEGER,
|
|
nsBgp4PathAttrASPathSegment
|
|
|
|
OCTET STRING,
|
|
nsBgp4PathAttrNextHop
|
|
IpAddress,
|
|
nsBgp4PathAttrMultiExitDisc
|
|
INTEGER,
|
|
nsBgp4PathAttrLocalPref
|
|
INTEGER,
|
|
nsBgp4PathAttrAtomicAggregate
|
|
INTEGER,
|
|
nsBgp4PathAttrAggregatorAS
|
|
INTEGER,
|
|
nsBgp4PathAttrAggregatorAddr
|
|
IpAddress,
|
|
nsBgp4PathAttrCalcLocalPref
|
|
INTEGER,
|
|
nsBgp4PathAttrBest
|
|
INTEGER,
|
|
nsBgp4PathAttrUnknown
|
|
OCTET STRING,
|
|
nsBgp4PathAttrVRID
|
|
INTEGER
|
|
|
|
}
|
|
|
|
nsBgp4PathAttrPeer OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The IP address of the peer where the path
|
|
information was learned."
|
|
::= { nsBgp4PathAttrEntry 1 }
|
|
|
|
nsBgp4PathAttrIpAddrPrefixLen OBJECT-TYPE
|
|
SYNTAX INTEGER (0..32)
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Length in bits of the IP address prefix
|
|
in the Network Layer Reachability
|
|
Information field."
|
|
::= { nsBgp4PathAttrEntry 2 }
|
|
|
|
nsBgp4PathAttrIpAddrPrefix OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"An IP address prefix in the Network Layer
|
|
Reachability Information field. This object
|
|
|
|
is an IP address containing the prefix with
|
|
length specified by
|
|
nsBgp4PathAttrIpAddrPrefixLen.
|
|
Any bits beyond the length specified by
|
|
nsBgp4PathAttrIpAddrPrefixLen are zeroed."
|
|
::= { nsBgp4PathAttrEntry 3 }
|
|
|
|
nsBgp4PathAttrOrigin OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
igp(1),-- networks are interior
|
|
egp(2),-- networks learned
|
|
-- via EGP
|
|
incomplete(3) -- undetermined
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The ultimate origin of the path
|
|
information."
|
|
::= { nsBgp4PathAttrEntry 4 }
|
|
|
|
nsBgp4PathAttrASPathSegment OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (2..255))
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The sequence of AS path segments. Each AS
|
|
path segment is represented by a triple
|
|
<type, length, value>.
|
|
|
|
The type is a 1-octet field which has two
|
|
possible values:
|
|
1 AS_SET: unordered set of ASs a
|
|
route in the UPDATE
|
|
message has traversed
|
|
2 AS_SEQUENCE: ordered set of ASs
|
|
a route in the UPDATE
|
|
message has traversed.
|
|
|
|
The length is a 1-octet field containing the
|
|
number of ASs in the value field.
|
|
|
|
The value field contains one or more AS
|
|
numbers, each AS is represented in the octet
|
|
string as a pair of octets according to the
|
|
following algorithm:
|
|
|
|
first-byte-of-pair = ASNumber / 256;
|
|
second-byte-of-pair = ASNumber & 255;"
|
|
::= { nsBgp4PathAttrEntry 5 }
|
|
|
|
nsBgp4PathAttrNextHop OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The address of the border router that
|
|
should be used for the destination
|
|
network."
|
|
::= { nsBgp4PathAttrEntry 6 }
|
|
|
|
nsBgp4PathAttrMultiExitDisc OBJECT-TYPE
|
|
SYNTAX INTEGER (-1..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This metric is used to discriminate
|
|
between multiple exit points to an
|
|
adjacent autonomous system. A value of -1
|
|
indicates the absence of this attribute."
|
|
::= { nsBgp4PathAttrEntry 7 }
|
|
|
|
nsBgp4PathAttrLocalPref OBJECT-TYPE
|
|
SYNTAX INTEGER (-1..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The originating BGP4 speaker's degree of
|
|
preference for an advertised route. A
|
|
value of -1 indicates the absence of this
|
|
attribute."
|
|
::= { nsBgp4PathAttrEntry 8 }
|
|
|
|
nsBgp4PathAttrAtomicAggregate OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
lessSpecificRrouteNotSelected(1),
|
|
lessSpecificRouteSelected(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Whether or not the local system has
|
|
selected a less specific route without
|
|
selecting a more specific route."
|
|
::= { nsBgp4PathAttrEntry 9 }
|
|
|
|
nsBgp4PathAttrAggregatorAS OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The AS number of the last BGP4 speaker that
|
|
performed route aggregation. A value of
|
|
zero (0) indicates the absence of this
|
|
attribute."
|
|
::= { nsBgp4PathAttrEntry 10 }
|
|
|
|
nsBgp4PathAttrAggregatorAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The IP address of the last BGP4 speaker
|
|
that performed route aggregation. A value
|
|
of 0.0.0.0 indicates the absence of this
|
|
attribute."
|
|
::= { nsBgp4PathAttrEntry 11 }
|
|
|
|
nsBgp4PathAttrCalcLocalPref OBJECT-TYPE
|
|
SYNTAX INTEGER (-1..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The degree of preference calculated by the
|
|
receiving BGP4 speaker for an advertised
|
|
route. A value of -1 indicates the
|
|
absence of this attribute."
|
|
::= { nsBgp4PathAttrEntry 12 }
|
|
|
|
nsBgp4PathAttrBest OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
false(1),-- not chosen as best route
|
|
true(2) -- chosen as best route
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"An indication of whether or not this route
|
|
was chosen as the best BGP4 route."
|
|
::= { nsBgp4PathAttrEntry 13 }
|
|
|
|
nsBgp4PathAttrUnknown OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..255))
|
|
MAX-ACCESS read-only
|
|
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"One or more path attributes not understood
|
|
by this BGP4 speaker. Size zero (0)
|
|
indicates the absence of such
|
|
attribute(s). Octets beyond the maximum
|
|
size, if any, are not recorded by this
|
|
object."
|
|
::= { nsBgp4PathAttrEntry 14 }
|
|
|
|
nsBgp4PathAttrVRID OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Virtual Router ID"
|
|
::= { nsBgp4PathAttrEntry 15 }
|
|
|
|
-- Traps.
|
|
|
|
nsBgpTraps OBJECT IDENTIFIER ::= { nsBgp 7 }
|
|
|
|
nsBgpEstablished NOTIFICATION-TYPE
|
|
OBJECTS { netscreenTrapType,
|
|
netscreenTrapDesc,
|
|
nsBgpPeerIdentifier,
|
|
nsBgpPeerVRID,
|
|
nsBgpPeerLastError,
|
|
nsBgpPeerState }
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The BGP Established event is generated when
|
|
the BGP FSM enters the ESTABLISHED state."
|
|
::= { nsBgpTraps 1 }
|
|
|
|
|
|
END
|
|
|