2398 lines
76 KiB
Plaintext
2398 lines
76 KiB
Plaintext
-- These MIBs were created on 1/7/2003
|
|
-- This module defines enterprise MIBs for NS OSPF
|
|
--
|
|
-- Copyright (c) 1999-2004, Juniper Networks, Inc.
|
|
-- All rights reserved.
|
|
|
|
|
|
NETSCREEN-OSPF-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, Counter32, Gauge32,
|
|
Integer32, IpAddress
|
|
FROM SNMPv2-SMI
|
|
TEXTUAL-CONVENTION, TruthValue, RowStatus
|
|
FROM SNMPv2-TC
|
|
MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF
|
|
mib-2 FROM RFC1213-MIB
|
|
netscreenVR FROM NETSCREEN-SMI;
|
|
|
|
-- This MIB module uses the extended OBJECT-TYPE macro as
|
|
-- defined in [9].
|
|
|
|
nsOspf MODULE-IDENTITY
|
|
LAST-UPDATED "200506032022Z" -- June 20, 2005
|
|
ORGANIZATION
|
|
"Juniper Networks, Inc."
|
|
CONTACT-INFO
|
|
"Customer Support
|
|
|
|
1194 North Mathilda Avenue
|
|
Sunnyvale, California 94089-1206
|
|
USA
|
|
|
|
Tel: 1-800-638-8296
|
|
E-mail: customerservice@juniper.net
|
|
HTTP://www.juniper.net"
|
|
DESCRIPTION
|
|
"The MIB module to describe the NS-OSPF Version 2
|
|
Protocol"
|
|
::= { netscreenVR 2 }
|
|
|
|
-- The Area ID, in OSPF, has the same format as an IP Address,
|
|
-- but has the function of defining a summarization point for
|
|
-- Link State Advertisements
|
|
|
|
AreaID ::= TEXTUAL-CONVENTION
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"An OSPF Area Identifier."
|
|
SYNTAX IpAddress
|
|
|
|
-- The Router ID, in OSPF, has the same format as an IP Address,
|
|
|
|
-- but identifies the router independent of its IP Address.
|
|
|
|
RouterID ::= TEXTUAL-CONVENTION
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A OSPF Router Identifier."
|
|
SYNTAX IpAddress
|
|
|
|
-- The OSPF Metric is defined as an unsigned value in the range
|
|
|
|
Metric ::= TEXTUAL-CONVENTION
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The OSPF Internal Metric."
|
|
SYNTAX Integer32 (0..'FFFF'H)
|
|
|
|
BigMetric ::= TEXTUAL-CONVENTION
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The OSPF External Metric."
|
|
SYNTAX Integer32 (0..'FFFFFF'H)
|
|
|
|
-- Status Values
|
|
|
|
Status ::= TEXTUAL-CONVENTION
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The status of an interface: 'enabled' indicates that
|
|
it is willing to communicate with other OSPF Routers,
|
|
while 'disabled' indicates that it is not."
|
|
SYNTAX INTEGER { enabled (1), disabled (2) }
|
|
|
|
-- Time Durations measured in seconds
|
|
|
|
PositiveInteger ::= TEXTUAL-CONVENTION
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A positive integer. Values in excess are precluded as
|
|
unnecessary and prone to interoperability issues."
|
|
SYNTAX Integer32 (0..'7FFFFFFF'H)
|
|
|
|
HelloRange ::= TEXTUAL-CONVENTION
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The range of intervals on which hello messages are
|
|
exchanged."
|
|
SYNTAX Integer32 (1..'FFFF'H)
|
|
|
|
UpToMaxAge ::= TEXTUAL-CONVENTION
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The values that one might find or configure for
|
|
variables bounded by the maximum age of an LSA."
|
|
SYNTAX Integer32 (0..3600)
|
|
|
|
-- The range of ifIndex
|
|
|
|
InterfaceIndex ::= TEXTUAL-CONVENTION
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The range of ifIndex."
|
|
SYNTAX Integer32
|
|
|
|
-- Potential Priorities for the Designated Router Election
|
|
|
|
DesignatedRouterPriority ::= TEXTUAL-CONVENTION
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The values defined for the priority of a system for
|
|
becoming the designated router."
|
|
SYNTAX Integer32 (0..'FF'H)
|
|
|
|
TOSType ::= TEXTUAL-CONVENTION
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Type of Service is defined as a mapping to the IP Type of
|
|
Service Flags as defined in the IP Forwarding Table MIB
|
|
|
|
+-----+-----+-----+-----+-----+-----+-----+-----+
|
|
| | | |
|
|
| PRECEDENCE | TYPE OF SERVICE | 0 |
|
|
| | | |
|
|
+-----+-----+-----+-----+-----+-----+-----+-----+
|
|
|
|
IP TOS IP TOS
|
|
Field Policy Field Policy
|
|
|
|
Contents Code Contents Code
|
|
0 0 0 0 ==> 0 0 0 0 1 ==> 2
|
|
0 0 1 0 ==> 4 0 0 1 1 ==> 6
|
|
0 1 0 0 ==> 8 0 1 0 1 ==> 10
|
|
0 1 1 0 ==> 12 0 1 1 1 ==> 14
|
|
1 0 0 0 ==> 16 1 0 0 1 ==> 18
|
|
1 0 1 0 ==> 20 1 0 1 1 ==> 22
|
|
|
|
1 1 0 0 ==> 24 1 1 0 1 ==> 26
|
|
1 1 1 0 ==> 28 1 1 1 1 ==> 30
|
|
|
|
The remaining values are left for future definition."
|
|
SYNTAX Integer32 (0..30)
|
|
|
|
-- OSPF General Variables
|
|
|
|
-- These parameters apply globally to the Router's
|
|
-- OSPF Process.
|
|
|
|
nsOspfGeneralTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NsOspfGeneralEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Ospf general information table per VR"
|
|
::= { nsOspf 1 }
|
|
|
|
nsOspfGeneralEntry OBJECT-TYPE
|
|
SYNTAX NsOspfGeneralEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Ospf general information table per VR"
|
|
INDEX { nsOspfGeneralVRID }
|
|
::= { nsOspfGeneralTable 1 }
|
|
|
|
NsOspfGeneralEntry ::=
|
|
SEQUENCE {
|
|
nsOspfRouterId
|
|
RouterID,
|
|
nsOspfAdminStat
|
|
Status,
|
|
nsOspfVersionNumber
|
|
INTEGER,
|
|
nsOspfAreaBdrRtrStatus
|
|
TruthValue,
|
|
nsOspfASBdrRtrStatus
|
|
TruthValue,
|
|
nsOspfExternLsaCount
|
|
Gauge32,
|
|
nsOspfAreaLsaCount
|
|
Gauge32,
|
|
nsOspfExternLsaCksumSum
|
|
Integer32,
|
|
nsOspfTOSSupport
|
|
TruthValue,
|
|
nsOspfOriginateNewLsas
|
|
Counter32,
|
|
nsOspfRxNewLsas
|
|
Counter32,
|
|
nsOspfExtLsdbLimit
|
|
Integer32,
|
|
nsOspfMulticastExtensions
|
|
Integer32,
|
|
nsOspfExitOverflowInterval
|
|
PositiveInteger,
|
|
nsOspfDemandExtensions
|
|
TruthValue,
|
|
nsOspfGeneralVRID
|
|
INTEGER
|
|
}
|
|
|
|
nsOspfRouterId OBJECT-TYPE
|
|
SYNTAX RouterID
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A 32-bit integer uniquely identifying the
|
|
router in the Autonomous System.
|
|
|
|
By convention, to ensure uniqueness, this
|
|
should default to the value of one of the
|
|
router's IP interface addresses."
|
|
REFERENCE
|
|
"OSPF Version 2, C.1 Global parameters"
|
|
::= { nsOspfGeneralEntry 1 }
|
|
|
|
nsOspfAdminStat OBJECT-TYPE
|
|
SYNTAX Status
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The administrative status of OSPF in the
|
|
router. The value 'enabled' denotes that the
|
|
OSPF Process is active on at least one inter-
|
|
face; 'disabled' disables it on all inter-
|
|
faces."
|
|
::= { nsOspfGeneralEntry 2 }
|
|
|
|
nsOspfVersionNumber OBJECT-TYPE
|
|
SYNTAX INTEGER { version2 (2) }
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
|
|
"The deprecated version number of the OSPF proto-
|
|
col is 2."
|
|
REFERENCE
|
|
"OSPF Version 2, Title"
|
|
::= { nsOspfGeneralEntry 3 }
|
|
|
|
nsOspfAreaBdrRtrStatus OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A flag to note whether this router is an area
|
|
border router."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 3 Splitting the AS into
|
|
Areas"
|
|
::= { nsOspfGeneralEntry 4 }
|
|
|
|
nsOspfASBdrRtrStatus OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A flag to note whether this router is config-
|
|
ured as an Autonomous System border router."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 3.3 Classification of
|
|
routers"
|
|
::= { nsOspfGeneralEntry 5 }
|
|
|
|
nsOspfExternLsaCount OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The number of external (LS type 5) link-state
|
|
advertisements in the link-state database."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix A.4.5 AS external link
|
|
advertisements"
|
|
::= { nsOspfGeneralEntry 6 }
|
|
|
|
nsOspfExternLsaCksumSum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The 32-bit unsigned sum of the LS checksums of
|
|
the external link-state advertisements con-
|
|
tained in the link-state database. This sum
|
|
can be used to determine if there has been a
|
|
change in a router's link state database, and
|
|
to compare the link-state database of two
|
|
routers."
|
|
::= { nsOspfGeneralEntry 7 }
|
|
|
|
nsOspfTOSSupport OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The router's support for type-of-service rout-
|
|
ing."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix F.1.2 Optional TOS
|
|
support"
|
|
::= { nsOspfGeneralEntry 8 }
|
|
|
|
nsOspfOriginateNewLsas OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The number of new link-state advertisements
|
|
that have been originated. This number is in-
|
|
cremented each time the router originates a new
|
|
LSA."
|
|
::= { nsOspfGeneralEntry 9 }
|
|
|
|
nsOspfRxNewLsas OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The number of link-state advertisements re-
|
|
ceived determined to be new instantiations.
|
|
This number does not include newer instantia-
|
|
tions of self-originated link-state advertise-
|
|
ments."
|
|
::= { nsOspfGeneralEntry 10 }
|
|
|
|
nsOspfExtLsdbLimit OBJECT-TYPE
|
|
SYNTAX Integer32 (-1..'7FFFFFFF'H)
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The maximum number of non-default AS-
|
|
external-LSAs entries that can be stored in the
|
|
link-state database. If the value is -1, then
|
|
there is no limit.
|
|
|
|
When the number of non-default AS-external-LSAs
|
|
in a router's link-state database reaches
|
|
nsOspfExtLsdbLimit, the router enters Overflow-
|
|
State. The router never holds more than
|
|
nsOspfExtLsdbLimit non-default AS-external-LSAs
|
|
in its database. OspfExtLsdbLimit MUST be set
|
|
identically in all routers attached to the OSPF
|
|
backbone and/or any regular OSPF area. (i.e.,
|
|
OSPF stub areas and NSSAs are excluded)."
|
|
DEFVAL { -1 }
|
|
::= { nsOspfGeneralEntry 11 }
|
|
|
|
nsOspfMulticastExtensions OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A Bit Mask indicating whether the router is
|
|
forwarding IP multicast (Class D) datagrams
|
|
based on the algorithms defined in the Multi-
|
|
cast Extensions to OSPF.
|
|
|
|
Bit 0, if set, indicates that the router can
|
|
forward IP multicast datagrams in the router's
|
|
directly attached areas (called intra-area mul-
|
|
ticast routing).
|
|
|
|
Bit 1, if set, indicates that the router can
|
|
forward IP multicast datagrams between OSPF
|
|
areas (called inter-area multicast routing).
|
|
|
|
Bit 2, if set, indicates that the router can
|
|
forward IP multicast datagrams between Auto-
|
|
nomous Systems (called inter-AS multicast rout-
|
|
ing).
|
|
|
|
Only certain combinations of bit settings are
|
|
allowed, namely: 0 (no multicast forwarding is
|
|
|
|
enabled), 1 (intra-area multicasting only), 3
|
|
(intra-area and inter-area multicasting), 5
|
|
(intra-area and inter-AS multicasting) and 7
|
|
(multicasting everywhere). By default, no mul-
|
|
ticast forwarding is enabled."
|
|
DEFVAL { 0 }
|
|
::= { nsOspfGeneralEntry 12 }
|
|
|
|
nsOspfExitOverflowInterval OBJECT-TYPE
|
|
SYNTAX PositiveInteger
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The number of seconds that, after entering
|
|
OverflowState, a router will attempt to leave
|
|
OverflowState. This allows the router to again
|
|
originate non-default AS-external-LSAs. When
|
|
set to 0, the router will not leave Overflow-
|
|
State until restarted."
|
|
DEFVAL { 0 }
|
|
::= { nsOspfGeneralEntry 13 }
|
|
|
|
nsOspfDemandExtensions OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The router's support for demand routing."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix on Demand Routing"
|
|
::= { nsOspfGeneralEntry 14 }
|
|
|
|
nsOspfGeneralVRID OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Virtual Router ID"
|
|
::= { nsOspfGeneralEntry 15 }
|
|
|
|
-- The OSPF Area Data Structure contains information
|
|
-- regarding the various areas. The interfaces and
|
|
-- virtual links are configured as part of these areas.
|
|
-- Area 0.0.0.0, by definition, is the Backbone Area
|
|
|
|
nsOspfAreaTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NsOspfAreaEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Information describing the configured parame-
|
|
ters and cumulative statistics of the router's
|
|
attached areas."
|
|
|
|
REFERENCE
|
|
"OSPF Version 2, Section 6 The Area Data Struc-
|
|
ture"
|
|
::= { nsOspf 2 }
|
|
|
|
nsOspfAreaEntry OBJECT-TYPE
|
|
SYNTAX NsOspfAreaEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Information describing the configured parame-
|
|
ters and cumulative statistics of one of the
|
|
router's attached areas."
|
|
INDEX { nsOspfAreaId, nsOspfAreaVRID }
|
|
::= { nsOspfAreaTable 1 }
|
|
|
|
NsOspfAreaEntry ::=
|
|
SEQUENCE {
|
|
nsOspfAreaId
|
|
AreaID,
|
|
nsOspfImportAsExtern
|
|
INTEGER,
|
|
nsOspfSpfRuns
|
|
Counter32,
|
|
nsOspfAreaBdrRtrCount
|
|
Gauge32,
|
|
nsOspfAsBdrRtrCount
|
|
Gauge32,
|
|
nsOspfAreaLsaCount
|
|
Gauge32,
|
|
nsOspfAreaLsaCksumSum
|
|
Integer32,
|
|
nsOspfAreaSummary
|
|
INTEGER,
|
|
nsOspfAreaStatus
|
|
RowStatus,
|
|
nsOspfAreaVRID
|
|
INTEGER
|
|
}
|
|
|
|
nsOspfAreaId OBJECT-TYPE
|
|
SYNTAX AreaID
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A 32-bit integer uniquely identifying an area.
|
|
Area ID 0.0.0.0 is used for the OSPF backbone."
|
|
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.2 Area parameters"
|
|
::= { nsOspfAreaEntry 1 }
|
|
|
|
nsOspfImportAsExtern OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
importExternal (1),
|
|
importNoExternal (2),
|
|
importNssa (3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The area's support for importing AS external
|
|
link- state advertisements."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.2 Area parameters"
|
|
DEFVAL { importExternal }
|
|
::= { nsOspfAreaEntry 3 }
|
|
|
|
nsOspfSpfRuns OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The number of times that the intra-area route
|
|
table has been calculated using this area's
|
|
link-state database. This is typically done
|
|
using Dijkstra's algorithm."
|
|
|
|
::= { nsOspfAreaEntry 4 }
|
|
|
|
nsOspfAreaBdrRtrCount OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The total number of area border routers reach-
|
|
able within this area. This is initially zero,
|
|
and is calculated in each SPF Pass."
|
|
::= { nsOspfAreaEntry 5 }
|
|
|
|
nsOspfAsBdrRtrCount OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The total number of Autonomous System border
|
|
routers reachable within this area. This is
|
|
initially zero, and is calculated in each SPF
|
|
Pass."
|
|
::= { nsOspfAreaEntry 6 }
|
|
|
|
nsOspfAreaLsaCount OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The total number of link-state advertisements
|
|
in this area's link-state database, excluding
|
|
AS External LSA's."
|
|
::= { nsOspfAreaEntry 7 }
|
|
|
|
nsOspfAreaLsaCksumSum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The 32-bit unsigned sum of the link-state ad-
|
|
vertisements' LS checksums contained in this
|
|
area's link-state database. This sum excludes
|
|
external (LS type 5) link-state advertisements.
|
|
The sum can be used to determine if there has
|
|
been a change in a router's link state data-
|
|
base, and to compare the link-state database of
|
|
|
|
two routers."
|
|
DEFVAL { 0 }
|
|
::= { nsOspfAreaEntry 8 }
|
|
|
|
nsOspfAreaSummary OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noAreaSummary (1),
|
|
sendAreaSummary (2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The variable nsOspfAreaSummary controls the im-
|
|
port of summary LSAs into stub areas. It has
|
|
no effect on other areas.
|
|
|
|
If it is noAreaSummary, the router will neither
|
|
originate nor propagate summary LSAs into the
|
|
stub area. It will rely entirely on its de-
|
|
fault route.
|
|
|
|
If it is sendAreaSummary, the router will both
|
|
summarize and propagate summary LSAs."
|
|
DEFVAL { noAreaSummary }
|
|
::= { nsOspfAreaEntry 9 }
|
|
|
|
nsOspfAreaStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This variable displays the status of the en-
|
|
try. Setting it to 'invalid' has the effect of
|
|
rendering it inoperative. The internal effect
|
|
(row removal) is implementation dependent."
|
|
::= { nsOspfAreaEntry 10 }
|
|
|
|
nsOspfAreaVRID OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Virtual Router ID"
|
|
::= { nsOspfAreaEntry 11 }
|
|
|
|
-- OSPF Area Default Metric Table
|
|
|
|
-- The OSPF Area Default Metric Table describes the metrics
|
|
-- that a default Area Border Router will advertise into a
|
|
-- Stub area.
|
|
|
|
nsOspfStubAreaTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NsOspfStubAreaEntry
|
|
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The set of metrics that will be advertised by
|
|
a default Area Border Router into a stub area."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.2, Area Parameters"
|
|
::= { nsOspf 3 }
|
|
|
|
nsOspfStubAreaEntry OBJECT-TYPE
|
|
SYNTAX NsOspfStubAreaEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The metric for a given Type of Service that
|
|
will be advertised by a default Area Border
|
|
Router into a stub area."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.2, Area Parameters"
|
|
INDEX { nsOspfStubAreaId, nsOspfStubTOS, nsOspfStubVRID }
|
|
::= { nsOspfStubAreaTable 1 }
|
|
|
|
NsOspfStubAreaEntry ::=
|
|
SEQUENCE {
|
|
nsOspfStubAreaId
|
|
AreaID,
|
|
nsOspfStubTOS
|
|
TOSType,
|
|
nsOspfStubMetric
|
|
BigMetric,
|
|
nsOspfStubStatus
|
|
RowStatus,
|
|
nsOspfStubMetricType
|
|
INTEGER,
|
|
nsOspfStubVRID
|
|
INTEGER
|
|
}
|
|
|
|
nsOspfStubAreaId OBJECT-TYPE
|
|
SYNTAX AreaID
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The 32 bit identifier for the Stub Area. On
|
|
creation, this can be derived from the in-
|
|
stance."
|
|
::= { nsOspfStubAreaEntry 1 }
|
|
|
|
nsOspfStubTOS OBJECT-TYPE
|
|
SYNTAX TOSType
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The Type of Service associated with the
|
|
metric. On creation, this can be derived from
|
|
the instance."
|
|
::= { nsOspfStubAreaEntry 2 }
|
|
|
|
nsOspfStubMetric OBJECT-TYPE
|
|
SYNTAX BigMetric
|
|
MAX-ACCESS read-create
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The metric value applied at the indicated type
|
|
of service. By default, this equals the least
|
|
metric at the type of service among the inter-
|
|
faces to other areas."
|
|
::= { nsOspfStubAreaEntry 3 }
|
|
|
|
nsOspfStubStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This variable displays the status of the en-
|
|
try. Setting it to 'invalid' has the effect of
|
|
rendering it inoperative. The internal effect
|
|
(row removal) is implementation dependent."
|
|
::= { nsOspfStubAreaEntry 4 }
|
|
|
|
nsOspfStubMetricType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
nsOspfMetric (1), -- OSPF Metric
|
|
comparableCost (2), -- external type 1
|
|
nonComparable (3) -- external type 2
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This variable displays the type of metric ad-
|
|
vertised as a default route."
|
|
DEFVAL { nsOspfMetric }
|
|
::= { nsOspfStubAreaEntry 5 }
|
|
|
|
nsOspfStubVRID OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Virtual Router ID"
|
|
::= { nsOspfStubAreaEntry 6 }
|
|
|
|
-- OSPF Link State Database
|
|
|
|
-- The Link State Database contains the Link State
|
|
-- Advertisements from throughout the areas that the
|
|
-- device is attached to.
|
|
|
|
nsOspfLsdbTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NsOspfLsdbEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The OSPF Process's Link State Database."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12 Link State Adver-
|
|
tisements"
|
|
::= { nsOspf 4 }
|
|
|
|
nsOspfLsdbEntry OBJECT-TYPE
|
|
SYNTAX NsOspfLsdbEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A single Link State Advertisement."
|
|
INDEX { nsOspfLsdbAreaId, nsOspfLsdbType,
|
|
nsOspfLsdbLsid, nsOspfLsdbRouterId, nsOspfLsdbVRID }
|
|
::= { nsOspfLsdbTable 1 }
|
|
|
|
NsOspfLsdbEntry ::=
|
|
SEQUENCE {
|
|
nsOspfLsdbAreaId
|
|
AreaID,
|
|
nsOspfLsdbType
|
|
INTEGER,
|
|
nsOspfLsdbLsid
|
|
IpAddress,
|
|
nsOspfLsdbRouterId
|
|
RouterID,
|
|
nsOspfLsdbSequence
|
|
Integer32,
|
|
nsOspfLsdbAge
|
|
Integer32,
|
|
nsOspfLsdbChecksum
|
|
Integer32,
|
|
nsOspfLsdbAdvertisement
|
|
OCTET STRING,
|
|
nsOspfLsdbVRID
|
|
INTEGER
|
|
}
|
|
|
|
nsOspfLsdbAreaId OBJECT-TYPE
|
|
SYNTAX AreaID
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The 32 bit identifier of the Area from which
|
|
the LSA was received."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.2 Area parameters"
|
|
::= { nsOspfLsdbEntry 1 }
|
|
|
|
-- External Link State Advertisements are permitted
|
|
-- for backward compatibility, but should be displayed in
|
|
-- the nsOspfExtLsdbTable rather than here.
|
|
|
|
nsOspfLsdbType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
routerLink (1),
|
|
networkLink (2),
|
|
summaryLink (3),
|
|
asSummaryLink (4),
|
|
asExternalLink (5), -- but see nsOspfExtLsdbTable
|
|
multicastLink (6),
|
|
nssaExternalLink (7)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The type of the link state advertisement.
|
|
Each link state type has a separate advertise-
|
|
ment format."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix A.4.1 The Link State
|
|
Advertisement header"
|
|
::= { nsOspfLsdbEntry 2 }
|
|
|
|
nsOspfLsdbLsid OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The Link State ID is an LS Type Specific field
|
|
containing either a Router ID or an IP Address;
|
|
it identifies the piece of the routing domain
|
|
that is being described by the advertisement."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12.1.4 Link State ID"
|
|
::= { nsOspfLsdbEntry 3 }
|
|
|
|
nsOspfLsdbRouterId OBJECT-TYPE
|
|
SYNTAX RouterID
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The 32 bit number that uniquely identifies the
|
|
originating router in the Autonomous System."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.1 Global parameters"
|
|
::= { nsOspfLsdbEntry 4 }
|
|
|
|
-- Note that the OSPF Sequence Number is a 32 bit signed
|
|
-- integer. It starts with the value '80000001'h,
|
|
-- or -'7FFFFFFF'h, and increments until '7FFFFFFF'h
|
|
-- Thus, a typical sequence number will be very negative.
|
|
|
|
nsOspfLsdbSequence OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The sequence number field is a signed 32-bit
|
|
integer. It is used to detect old and dupli-
|
|
cate link state advertisements. The space of
|
|
sequence numbers is linearly ordered. The
|
|
larger the sequence number the more recent the
|
|
advertisement."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12.1.6 LS sequence
|
|
number"
|
|
::= { nsOspfLsdbEntry 5 }
|
|
|
|
nsOspfLsdbAge OBJECT-TYPE
|
|
SYNTAX Integer32 -- Should be 0..MaxAge
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This field is the age of the link state adver-
|
|
tisement in seconds."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12.1.1 LS age"
|
|
::= { nsOspfLsdbEntry 6 }
|
|
|
|
nsOspfLsdbChecksum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
|
|
DESCRIPTION
|
|
"This field is the checksum of the complete
|
|
contents of the advertisement, excepting the
|
|
age field. The age field is excepted so that
|
|
an advertisement's age can be incremented
|
|
without updating the checksum. The checksum
|
|
used is the same that is used for ISO connec-
|
|
tionless datagrams; it is commonly referred to
|
|
as the Fletcher checksum."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12.1.7 LS checksum"
|
|
::= { nsOspfLsdbEntry 7 }
|
|
|
|
nsOspfLsdbAdvertisement OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..65535))
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The entire Link State Advertisement, including
|
|
its header."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12 Link State Adver-
|
|
tisements"
|
|
::= { nsOspfLsdbEntry 8 }
|
|
|
|
nsOspfLsdbVRID OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Virtual Router ID"
|
|
::= { nsOspfLsdbEntry 9 }
|
|
|
|
-- OSPF Host Table
|
|
|
|
-- The Host/Metric Table indicates what hosts are directly
|
|
|
|
-- attached to the Router, and what metrics and types of
|
|
-- service should be advertised for them.
|
|
|
|
nsOspfHostTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NsOspfHostEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The list of Hosts, and their metrics, that the
|
|
router will advertise as host routes."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.6 Host route param-
|
|
eters"
|
|
::= { nsOspf 6 }
|
|
|
|
nsOspfHostEntry OBJECT-TYPE
|
|
SYNTAX NsOspfHostEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A metric to be advertised, for a given type of
|
|
service, when a given host is reachable."
|
|
INDEX { nsOspfHostIpAddress, nsOspfHostTOS, nsOspfHostVRID }
|
|
::= { nsOspfHostTable 1 }
|
|
|
|
NsOspfHostEntry ::=
|
|
SEQUENCE {
|
|
nsOspfHostIpAddress
|
|
IpAddress,
|
|
nsOspfHostTOS
|
|
TOSType,
|
|
nsOspfHostMetric
|
|
Metric,
|
|
nsOspfHostStatus
|
|
RowStatus,
|
|
nsOspfHostAreaID
|
|
AreaID,
|
|
nsOspfHostVRID
|
|
INTEGER
|
|
}
|
|
|
|
nsOspfHostIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The IP Address of the Host."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.6 Host route parame-
|
|
|
|
ters"
|
|
::= { nsOspfHostEntry 1 }
|
|
|
|
nsOspfHostTOS OBJECT-TYPE
|
|
SYNTAX TOSType
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The Type of Service of the route being config-
|
|
ured."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.6 Host route parame-
|
|
ters"
|
|
::= { nsOspfHostEntry 2 }
|
|
|
|
nsOspfHostMetric OBJECT-TYPE
|
|
SYNTAX Metric
|
|
MAX-ACCESS read-create
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The Metric to be advertised."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.6 Host route parame-
|
|
ters"
|
|
::= { nsOspfHostEntry 3 }
|
|
|
|
nsOspfHostStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This variable displays the status of the en-
|
|
try. Setting it to 'invalid' has the effect of
|
|
rendering it inoperative. The internal effect
|
|
(row removal) is implementation dependent."
|
|
::= { nsOspfHostEntry 4 }
|
|
|
|
nsOspfHostAreaID OBJECT-TYPE
|
|
SYNTAX AreaID
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The Area the Host Entry is to be found within.
|
|
By default, the area that a subsuming OSPF in-
|
|
terface is in, or 0.0.0.0"
|
|
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.2 Area parameters"
|
|
::= { nsOspfHostEntry 5 }
|
|
|
|
nsOspfHostVRID OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Virtual Router ID"
|
|
::= { nsOspfHostEntry 6 }
|
|
|
|
-- OSPF Interface Table
|
|
|
|
-- The OSPF Interface Table augments the ipAddrTable
|
|
-- with OSPF specific information.
|
|
|
|
nsOspfIfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NsOspfIfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The OSPF Interface Table describes the inter-
|
|
faces from the viewpoint of OSPF."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.3 Router interface
|
|
parameters"
|
|
::= { nsOspf 7 }
|
|
|
|
nsOspfIfEntry OBJECT-TYPE
|
|
SYNTAX NsOspfIfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The OSPF Interface Entry describes one inter-
|
|
face from the viewpoint of OSPF."
|
|
INDEX { nsOspfIfIpAddress, nsOspfAddressLessIf, nsOspfIfVRID }
|
|
::= { nsOspfIfTable 1 }
|
|
|
|
NsOspfIfEntry ::=
|
|
SEQUENCE {
|
|
nsOspfIfIpAddress
|
|
IpAddress,
|
|
nsOspfAddressLessIf
|
|
Integer32,
|
|
nsOspfIfAreaId
|
|
AreaID,
|
|
nsOspfIfType
|
|
INTEGER,
|
|
nsOspfIfAdminStat
|
|
Status,
|
|
nsOspfIfRtrPriority
|
|
DesignatedRouterPriority,
|
|
nsOspfIfTransitDelay
|
|
|
|
UpToMaxAge,
|
|
nsOspfIfRetransInterval
|
|
UpToMaxAge,
|
|
nsOspfIfHelloInterval
|
|
HelloRange,
|
|
nsOspfIfRtrDeadInterval
|
|
PositiveInteger,
|
|
nsOspfIfPollInterval
|
|
PositiveInteger,
|
|
nsOspfIfState
|
|
INTEGER,
|
|
nsOspfIfDesignatedRouter
|
|
IpAddress,
|
|
nsOspfIfBackupDesignatedRouter
|
|
IpAddress,
|
|
nsOspfIfEvents
|
|
Counter32,
|
|
nsOspfIfAuthType
|
|
INTEGER,
|
|
nsOspfIfAuthKey
|
|
OCTET STRING,
|
|
nsOspfIfStatus
|
|
RowStatus,
|
|
nsOspfIfMulticastForwarding
|
|
INTEGER,
|
|
nsOspfIfDemand
|
|
TruthValue,
|
|
nsOspfIfVRID
|
|
INTEGER
|
|
}
|
|
|
|
nsOspfIfIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The IP address of this OSPF interface."
|
|
::= { nsOspfIfEntry 1 }
|
|
|
|
nsOspfAddressLessIf OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"For the purpose of easing the instancing of
|
|
addressed and addressless interfaces; This
|
|
variable takes the value 0 on interfaces with
|
|
IP Addresses, and the corresponding value of
|
|
ifIndex for interfaces having no IP Address."
|
|
::= { nsOspfIfEntry 2 }
|
|
|
|
nsOspfIfAreaId OBJECT-TYPE
|
|
SYNTAX AreaID
|
|
MAX-ACCESS read-create
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A 32-bit integer uniquely identifying the area
|
|
to which the interface connects. Area ID
|
|
0.0.0.0 is used for the OSPF backbone."
|
|
DEFVAL { '00000000'H } -- 0.0.0.0
|
|
::= { nsOspfIfEntry 3 }
|
|
|
|
nsOspfIfType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
broadcast (1),
|
|
nbma (2),
|
|
pointToPoint (3),
|
|
pointToMultipoint (5)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The OSPF interface type.
|
|
|
|
By way of a default, this field may be intuited
|
|
from the corresponding value of ifType. Broad-
|
|
cast LANs, such as Ethernet and IEEE 802.5,
|
|
take the value 'broadcast', X.25 and similar
|
|
technologies take the value 'nbma', and links
|
|
that are definitively point to point take the
|
|
value 'pointToPoint'."
|
|
::= { nsOspfIfEntry 4 }
|
|
|
|
nsOspfIfAdminStat OBJECT-TYPE
|
|
SYNTAX Status
|
|
MAX-ACCESS read-create
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The OSPF interface's administrative status.
|
|
The value formed on the interface, and the in-
|
|
terface will be advertised as an internal route
|
|
to some area. The value 'disabled' denotes
|
|
that the interface is external to OSPF."
|
|
DEFVAL { enabled }
|
|
::= { nsOspfIfEntry 5 }
|
|
|
|
nsOspfIfRtrPriority OBJECT-TYPE
|
|
SYNTAX DesignatedRouterPriority
|
|
|
|
MAX-ACCESS read-create
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The priority of this interface. Used in
|
|
multi-access networks, this field is used in
|
|
the designated router election algorithm. The
|
|
value 0 signifies that the router is not eligi-
|
|
ble to become the designated router on this
|
|
particular network. In the event of a tie in
|
|
this value, routers will use their Router ID as
|
|
a tie breaker."
|
|
DEFVAL { 1 }
|
|
::= { nsOspfIfEntry 6 }
|
|
|
|
nsOspfIfTransitDelay OBJECT-TYPE
|
|
SYNTAX UpToMaxAge
|
|
MAX-ACCESS read-create
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The estimated number of seconds it takes to
|
|
transmit a link state update packet over this
|
|
interface."
|
|
DEFVAL { 1 }
|
|
::= { nsOspfIfEntry 7 }
|
|
|
|
nsOspfIfRetransInterval OBJECT-TYPE
|
|
SYNTAX UpToMaxAge
|
|
MAX-ACCESS read-create
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The number of seconds between link-state ad-
|
|
vertisement retransmissions, for adjacencies
|
|
belonging to this interface. This value is
|
|
also used when retransmitting database descrip-
|
|
tion and link-state request packets."
|
|
DEFVAL { 5 }
|
|
::= { nsOspfIfEntry 8 }
|
|
|
|
nsOspfIfHelloInterval OBJECT-TYPE
|
|
SYNTAX HelloRange
|
|
MAX-ACCESS read-create
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The length of time, in seconds, between the
|
|
Hello packets that the router sends on the in-
|
|
|
|
terface. This value must be the same for all
|
|
routers attached to a common network."
|
|
DEFVAL { 10 }
|
|
::= { nsOspfIfEntry 9 }
|
|
|
|
nsOspfIfRtrDeadInterval OBJECT-TYPE
|
|
SYNTAX PositiveInteger
|
|
MAX-ACCESS read-create
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The number of seconds that a router's Hello
|
|
packets have not been seen before it's neigh-
|
|
bors declare the router down. This should be
|
|
some multiple of the Hello interval. This
|
|
value must be the same for all routers attached
|
|
to a common network."
|
|
DEFVAL { 40 }
|
|
::= { nsOspfIfEntry 10 }
|
|
|
|
nsOspfIfPollInterval OBJECT-TYPE
|
|
SYNTAX PositiveInteger
|
|
MAX-ACCESS read-create
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The larger time interval, in seconds, between
|
|
the Hello packets sent to an inactive non-
|
|
broadcast multi- access neighbor."
|
|
DEFVAL { 120 }
|
|
::= { nsOspfIfEntry 11 }
|
|
|
|
nsOspfIfState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
down (1),
|
|
loopback (2),
|
|
waiting (3),
|
|
pointToPoint (4),
|
|
designatedRouter (5),
|
|
backupDesignatedRouter (6),
|
|
otherDesignatedRouter (7)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The OSPF Interface State."
|
|
DEFVAL { down }
|
|
|
|
::= { nsOspfIfEntry 12 }
|
|
|
|
nsOspfIfDesignatedRouter OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The IP Address of the Designated Router."
|
|
DEFVAL { '00000000'H } -- 0.0.0.0
|
|
::= { nsOspfIfEntry 13 }
|
|
|
|
nsOspfIfBackupDesignatedRouter OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The IP Address of the Backup Designated
|
|
Router."
|
|
DEFVAL { '00000000'H } -- 0.0.0.0
|
|
::= { nsOspfIfEntry 14 }
|
|
|
|
nsOspfIfEvents OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The number of times this OSPF interface has
|
|
changed its state, or an error has occurred."
|
|
::= { nsOspfIfEntry 15 }
|
|
|
|
nsOspfIfAuthKey OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..256))
|
|
MAX-ACCESS read-create
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The Authentication Key. If the Area's Author-
|
|
ization Type is simplePassword, and the key
|
|
length is shorter than 8 octets, the agent will
|
|
left adjust and zero fill to 8 octets.
|
|
|
|
Note that unauthenticated interfaces need no
|
|
authentication key, and simple password authen-
|
|
tication cannot use a key of more than 8 oc-
|
|
tets. Larger keys are useful only with authen-
|
|
tication mechanisms not specified in this docu-
|
|
|
|
ment.
|
|
|
|
When read, nsOspfIfAuthKey always returns an Oc-
|
|
tet String of length zero."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 9 The Interface Data
|
|
Structure"
|
|
DEFVAL { '0000000000000000'H } -- 0.0.0.0.0.0.0.0
|
|
::= { nsOspfIfEntry 16 }
|
|
|
|
nsOspfIfStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This variable displays the status of the en-
|
|
try. Setting it to 'invalid' has the effect of
|
|
rendering it inoperative. The internal effect
|
|
(row removal) is implementation dependent."
|
|
::= { nsOspfIfEntry 17 }
|
|
|
|
nsOspfIfMulticastForwarding OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
blocked (1), -- no multicast forwarding
|
|
multicast (2), -- using multicast address
|
|
unicast (3) -- to each OSPF neighbor
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The way multicasts should forwarded on this
|
|
interface; not forwarded, forwarded as data
|
|
link multicasts, or forwarded as data link uni-
|
|
casts. Data link multicasting is not meaning-
|
|
ful on point to point and NBMA interfaces, and
|
|
setting nsOspfMulticastForwarding to 0 effective-
|
|
ly disables all multicast forwarding."
|
|
DEFVAL { blocked }
|
|
::= { nsOspfIfEntry 18 }
|
|
|
|
nsOspfIfDemand OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Indicates whether Demand OSPF procedures (hel-
|
|
|
|
lo supression to FULL neighbors and setting the
|
|
DoNotAge flag on proogated LSAs) should be per-
|
|
formed on this interface."
|
|
DEFVAL { false }
|
|
::= { nsOspfIfEntry 19 }
|
|
|
|
nsOspfIfAuthType OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
-- none (0),
|
|
-- simplePassword (1)
|
|
-- md5 (2)
|
|
-- reserved for specification by IANA (> 2)
|
|
MAX-ACCESS read-create
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The authentication type specified for an in-
|
|
terface. Additional authentication types may
|
|
be assigned locally."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix E Authentication"
|
|
DEFVAL { 0 } -- no authentication, by default
|
|
::= { nsOspfIfEntry 20 }
|
|
|
|
nsOspfIfVRID OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Virtual Router ID"
|
|
::= { nsOspfIfEntry 21 }
|
|
|
|
-- OSPF Interface Metric Table
|
|
|
|
-- The Metric Table describes the metrics to be advertised
|
|
-- for a specified interface at the various types of service.
|
|
-- As such, this table is an adjunct of the OSPF Interface
|
|
-- Table.
|
|
|
|
-- Types of service, as defined by RFC 791, have the ability
|
|
-- to request low delay, high bandwidth, or reliable linkage.
|
|
|
|
-- For the purposes of this specification, the measure of
|
|
-- bandwidth
|
|
|
|
-- Metric = 10^8 / ifSpeed
|
|
|
|
-- is the default value. For multiple link interfaces, note
|
|
-- that ifSpeed is the sum of the individual link speeds.
|
|
-- This yields a number having the following typical values:
|
|
|
|
-- Network Type/bit rate Metric
|
|
|
|
-- >= 100 MBPS 1
|
|
-- Ethernet/802.3 10
|
|
|
|
-- E1 48
|
|
-- T1 (ESF) 65
|
|
-- 64 KBPS 1562
|
|
-- 56 KBPS 1785
|
|
-- 19.2 KBPS 5208
|
|
-- 9.6 KBPS 10416
|
|
|
|
-- Routes that are not specified use the default (TOS 0) metric
|
|
|
|
nsOspfIfMetricTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NsOspfIfMetricEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The TOS metrics for a non-virtual interface
|
|
identified by the interface index."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.3 Router interface
|
|
parameters"
|
|
::= { nsOspf 8 }
|
|
|
|
nsOspfIfMetricEntry OBJECT-TYPE
|
|
SYNTAX NsOspfIfMetricEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A particular TOS metric for a non-virtual in-
|
|
terface identified by the interface index."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.3 Router interface
|
|
parameters"
|
|
INDEX { nsOspfIfMetricIpAddress,
|
|
nsOspfIfMetricAddressLessIf,
|
|
nsOspfIfMetricTOS,
|
|
nsOspfIfMetricVRID }
|
|
::= { nsOspfIfMetricTable 1 }
|
|
|
|
NsOspfIfMetricEntry ::=
|
|
SEQUENCE {
|
|
nsOspfIfMetricIpAddress
|
|
IpAddress,
|
|
nsOspfIfMetricAddressLessIf
|
|
Integer32,
|
|
nsOspfIfMetricTOS
|
|
TOSType,
|
|
nsOspfIfMetricValue
|
|
Metric,
|
|
nsOspfIfMetricStatus
|
|
RowStatus,
|
|
nsOspfIfMetricVRID
|
|
INTEGER
|
|
|
|
}
|
|
|
|
nsOspfIfMetricIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The IP address of this OSPF interface. On row
|
|
creation, this can be derived from the in-
|
|
stance."
|
|
::= { nsOspfIfMetricEntry 1 }
|
|
|
|
nsOspfIfMetricAddressLessIf OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"For the purpose of easing the instancing of
|
|
addressed and addressless interfaces; This
|
|
variable takes the value 0 on interfaces with
|
|
IP Addresses, and the value of ifIndex for in-
|
|
terfaces having no IP Address. On row crea-
|
|
tion, this can be derived from the instance."
|
|
::= { nsOspfIfMetricEntry 2 }
|
|
|
|
nsOspfIfMetricTOS OBJECT-TYPE
|
|
SYNTAX TOSType
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The type of service metric being referenced.
|
|
On row creation, this can be derived from the
|
|
instance."
|
|
::= { nsOspfIfMetricEntry 3 }
|
|
|
|
nsOspfIfMetricValue OBJECT-TYPE
|
|
SYNTAX Metric
|
|
MAX-ACCESS read-create
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The metric of using this type of service on
|
|
this interface. The default value of the TOS 0
|
|
Metric is 10^8 / ifSpeed."
|
|
::= { nsOspfIfMetricEntry 4 }
|
|
|
|
nsOspfIfMetricStatus OBJECT-TYPE
|
|
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This variable displays the status of the en-
|
|
try. Setting it to 'invalid' has the effect of
|
|
rendering it inoperative. The internal effect
|
|
(row removal) is implementation dependent."
|
|
::= { nsOspfIfMetricEntry 5 }
|
|
|
|
nsOspfIfMetricVRID OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Virtual Router ID"
|
|
::= { nsOspfIfMetricEntry 6 }
|
|
|
|
-- OSPF Virtual Interface Table
|
|
|
|
-- The Virtual Interface Table describes the virtual
|
|
-- links that the OSPF Process is configured to
|
|
-- carry on.
|
|
|
|
nsOspfVirtIfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NsOspfVirtIfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Information about this router's virtual inter-
|
|
faces."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.4 Virtual link
|
|
parameters"
|
|
::= { nsOspf 9 }
|
|
|
|
nsOspfVirtIfEntry OBJECT-TYPE
|
|
SYNTAX NsOspfVirtIfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Information about a single Virtual Interface."
|
|
INDEX { nsOspfVirtIfAreaId, nsOspfVirtIfNeighbor, nsOspfVirtIfVRID }
|
|
::= { nsOspfVirtIfTable 1 }
|
|
|
|
NsOspfVirtIfEntry ::=
|
|
SEQUENCE {
|
|
nsOspfVirtIfAreaId
|
|
AreaID,
|
|
nsOspfVirtIfNeighbor
|
|
RouterID,
|
|
nsOspfVirtIfTransitDelay
|
|
UpToMaxAge,
|
|
nsOspfVirtIfRetransInterval
|
|
|
|
UpToMaxAge,
|
|
nsOspfVirtIfHelloInterval
|
|
HelloRange,
|
|
nsOspfVirtIfRtrDeadInterval
|
|
PositiveInteger,
|
|
nsOspfVirtIfState
|
|
INTEGER,
|
|
nsOspfVirtIfEvents
|
|
Counter32,
|
|
nsOspfVirtIfAuthType
|
|
INTEGER,
|
|
nsOspfVirtIfAuthKey
|
|
OCTET STRING,
|
|
nsOspfVirtIfStatus
|
|
RowStatus,
|
|
nsOspfVirtIfVRID
|
|
INTEGER
|
|
}
|
|
|
|
nsOspfVirtIfAreaId OBJECT-TYPE
|
|
SYNTAX AreaID
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The Transit Area that the Virtual Link
|
|
traverses. By definition, this is not 0.0.0.0"
|
|
::= { nsOspfVirtIfEntry 1 }
|
|
|
|
nsOspfVirtIfNeighbor OBJECT-TYPE
|
|
SYNTAX RouterID
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The Router ID of the Virtual Neighbor."
|
|
::= { nsOspfVirtIfEntry 2 }
|
|
|
|
nsOspfVirtIfTransitDelay OBJECT-TYPE
|
|
SYNTAX UpToMaxAge
|
|
MAX-ACCESS read-create
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The estimated number of seconds it takes to
|
|
transmit a link- state update packet over this
|
|
interface."
|
|
DEFVAL { 1 }
|
|
::= { nsOspfVirtIfEntry 3 }
|
|
|
|
nsOspfVirtIfRetransInterval OBJECT-TYPE
|
|
SYNTAX UpToMaxAge
|
|
MAX-ACCESS read-create
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The number of seconds between link-state ad-
|
|
vertisement retransmissions, for adjacencies
|
|
belonging to this interface. This value is
|
|
also used when retransmitting database descrip-
|
|
tion and link-state request packets. This
|
|
value should be well over the expected round-
|
|
trip time."
|
|
DEFVAL { 5 }
|
|
::= { nsOspfVirtIfEntry 4 }
|
|
|
|
nsOspfVirtIfHelloInterval OBJECT-TYPE
|
|
SYNTAX HelloRange
|
|
MAX-ACCESS read-create
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The length of time, in seconds, between the
|
|
Hello packets that the router sends on the in-
|
|
terface. This value must be the same for the
|
|
virtual neighbor."
|
|
DEFVAL { 10 }
|
|
::= { nsOspfVirtIfEntry 5 }
|
|
|
|
nsOspfVirtIfRtrDeadInterval OBJECT-TYPE
|
|
SYNTAX PositiveInteger
|
|
MAX-ACCESS read-create
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The number of seconds that a router's Hello
|
|
packets have not been seen before it's neigh-
|
|
bors declare the router down. This should be
|
|
some multiple of the Hello interval. This
|
|
value must be the same for the virtual neigh-
|
|
bor."
|
|
DEFVAL { 60 }
|
|
::= { nsOspfVirtIfEntry 6 }
|
|
|
|
nsOspfVirtIfState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
down (1), -- these use the same encoding
|
|
pointToPoint (4) -- as the nsOspfIfTable
|
|
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"OSPF virtual interface states."
|
|
DEFVAL { down }
|
|
::= { nsOspfVirtIfEntry 7 }
|
|
|
|
nsOspfVirtIfEvents OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The number of state changes or error events on
|
|
this Virtual Link"
|
|
::= { nsOspfVirtIfEntry 8 }
|
|
|
|
nsOspfVirtIfAuthKey OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..256))
|
|
MAX-ACCESS read-create
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"If Authentication Type is simplePassword, the
|
|
device will left adjust and zero fill to 8 oc-
|
|
tets.
|
|
|
|
Note that unauthenticated interfaces need no
|
|
authentication key, and simple password authen-
|
|
tication cannot use a key of more than 8 oc-
|
|
tets. Larger keys are useful only with authen-
|
|
tication mechanisms not specified in this docu-
|
|
ment.
|
|
|
|
When read, nsOspfVifAuthKey always returns a
|
|
string of length zero."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 9 The Interface Data
|
|
Structure"
|
|
DEFVAL { '0000000000000000'H } -- 0.0.0.0.0.0.0.0
|
|
::= { nsOspfVirtIfEntry 9 }
|
|
|
|
nsOspfVirtIfStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS deprecated
|
|
|
|
DESCRIPTION
|
|
"This variable displays the status of the en-
|
|
try. Setting it to 'invalid' has the effect of
|
|
rendering it inoperative. The internal effect
|
|
(row removal) is implementation dependent."
|
|
::= { nsOspfVirtIfEntry 10 }
|
|
|
|
nsOspfVirtIfAuthType OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
-- none (0),
|
|
-- simplePassword (1)
|
|
-- md5 (2)
|
|
-- reserved for specification by IANA (> 2)
|
|
MAX-ACCESS read-create
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The authentication type specified for a virtu-
|
|
al interface. Additional authentication types
|
|
may be assigned locally."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix E Authentication"
|
|
DEFVAL { 0 } -- no authentication, by default
|
|
::= { nsOspfVirtIfEntry 11 }
|
|
|
|
nsOspfVirtIfVRID OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Virtual Router ID"
|
|
::= { nsOspfVirtIfEntry 12 }
|
|
|
|
-- OSPF Neighbor Table
|
|
|
|
-- The OSPF Neighbor Table describes all neighbors in
|
|
-- the locality of the subject router.
|
|
|
|
nsOspfNbrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NsOspfNbrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A table of non-virtual neighbor information."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 10 The Neighbor Data
|
|
Structure"
|
|
::= { nsOspf 10 }
|
|
|
|
nsOspfNbrEntry OBJECT-TYPE
|
|
SYNTAX NsOspfNbrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
|
|
"The information regarding a single neighbor."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 10 The Neighbor Data
|
|
Structure"
|
|
INDEX { nsOspfNbrIpAddr, nsOspfNbrAddressLessIndex, nsOspfNbrVRID }
|
|
::= { nsOspfNbrTable 1 }
|
|
|
|
NsOspfNbrEntry ::=
|
|
SEQUENCE {
|
|
nsOspfNbrIpAddr
|
|
IpAddress,
|
|
nsOspfNbrAddressLessIndex
|
|
InterfaceIndex,
|
|
nsOspfNbrRtrId
|
|
RouterID,
|
|
nsOspfNbrOptions
|
|
Integer32,
|
|
nsOspfNbrPriority
|
|
DesignatedRouterPriority,
|
|
nsOspfNbrState
|
|
INTEGER,
|
|
nsOspfNbrEvents
|
|
Counter32,
|
|
nsOspfNbrLsRetransQLen
|
|
Gauge32,
|
|
nsOspfNbmaNbrStatus
|
|
RowStatus,
|
|
nsOspfNbmaNbrPermanence
|
|
INTEGER,
|
|
nsOspfNbrHelloSuppressed
|
|
TruthValue,
|
|
nsOspfNbrVRID
|
|
INTEGER
|
|
}
|
|
|
|
nsOspfNbrIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The IP address this neighbor is using in its
|
|
IP Source Address. Note that, on addressless
|
|
links, this will not be 0.0.0.0, but the ad-
|
|
dress of another of the neighbor's interfaces."
|
|
::= { nsOspfNbrEntry 1 }
|
|
|
|
nsOspfNbrAddressLessIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"On an interface having an IP Address, zero.
|
|
On addressless interfaces, the corresponding
|
|
value of ifIndex in the Internet Standard MIB.
|
|
On row creation, this can be derived from the
|
|
instance."
|
|
::= { nsOspfNbrEntry 2 }
|
|
|
|
nsOspfNbrRtrId OBJECT-TYPE
|
|
SYNTAX RouterID
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A 32-bit integer (represented as a type IpAd-
|
|
dress) uniquely identifying the neighboring
|
|
router in the Autonomous System."
|
|
DEFVAL { '00000000'H } -- 0.0.0.0
|
|
::= { nsOspfNbrEntry 3 }
|
|
|
|
nsOspfNbrOptions OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A Bit Mask corresponding to the neighbor's op-
|
|
tions field.
|
|
|
|
Bit 0, if set, indicates that the system will
|
|
operate on Type of Service metrics other than
|
|
TOS 0. If zero, the neighbor will ignore all
|
|
metrics except the TOS 0 metric.
|
|
|
|
Bit 1, if set, indicates that the associated
|
|
area accepts and operates on external informa-
|
|
tion; if zero, it is a stub area.
|
|
|
|
Bit 2, if set, indicates that the system is ca-
|
|
pable of routing IP Multicast datagrams; i.e.,
|
|
that it implements the Multicast Extensions to
|
|
OSPF.
|
|
|
|
Bit 3, if set, indicates that the associated
|
|
area is an NSSA. These areas are capable of
|
|
carrying type 7 external advertisements, which
|
|
are translated into type 5 external advertise-
|
|
|
|
ments at NSSA borders."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12.1.2 Options"
|
|
DEFVAL { 0 }
|
|
::= { nsOspfNbrEntry 4 }
|
|
|
|
nsOspfNbrPriority OBJECT-TYPE
|
|
SYNTAX DesignatedRouterPriority
|
|
MAX-ACCESS read-create
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The priority of this neighbor in the designat-
|
|
ed router election algorithm. The value 0 sig-
|
|
nifies that the neighbor is not eligible to be-
|
|
come the designated router on this particular
|
|
network."
|
|
DEFVAL { 1 }
|
|
::= { nsOspfNbrEntry 5 }
|
|
|
|
nsOspfNbrState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
down (1),
|
|
attempt (2),
|
|
init (3),
|
|
twoWay (4),
|
|
exchangeStart (5),
|
|
exchange (6),
|
|
loading (7),
|
|
full (8)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The State of the relationship with this Neigh-
|
|
bor."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 10.1 Neighbor States"
|
|
DEFVAL { down }
|
|
::= { nsOspfNbrEntry 6 }
|
|
|
|
nsOspfNbrEvents OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
|
|
"The number of times this neighbor relationship
|
|
has changed state, or an error has occurred."
|
|
::= { nsOspfNbrEntry 7 }
|
|
|
|
nsOspfNbrLsRetransQLen OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The deprecated length of the retransmission
|
|
queue."
|
|
::= { nsOspfNbrEntry 8 }
|
|
|
|
nsOspfNbmaNbrStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This variable displays the status of the en-
|
|
try. Setting it to 'invalid' has the effect of
|
|
rendering it inoperative. The internal effect
|
|
(row removal) is implementation dependent."
|
|
::= { nsOspfNbrEntry 9 }
|
|
|
|
nsOspfNbmaNbrPermanence OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
dynamic (1), -- learned through protocol
|
|
permanent (2) -- configured address
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This variable displays the status of the en-
|
|
try. 'dynamic' and 'permanent' refer to how
|
|
the neighbor became known."
|
|
DEFVAL { permanent }
|
|
::= { nsOspfNbrEntry 10 }
|
|
|
|
nsOspfNbrHelloSuppressed OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Indicates whether Hellos are being suppressed
|
|
|
|
to the neighbor"
|
|
::= { nsOspfNbrEntry 11 }
|
|
|
|
nsOspfNbrVRID OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Virtual Router ID"
|
|
::= { nsOspfNbrEntry 12 }
|
|
|
|
-- OSPF Virtual Neighbor Table
|
|
|
|
-- This table describes all virtual neighbors.
|
|
-- Since Virtual Links are configured in the
|
|
-- virtual interface table, this table is read-only.
|
|
|
|
nsOspfVirtNbrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NsOspfVirtNbrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A table of virtual neighbor information."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 15 Virtual Links"
|
|
::= { nsOspf 11 }
|
|
|
|
nsOspfVirtNbrEntry OBJECT-TYPE
|
|
SYNTAX NsOspfVirtNbrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Virtual neighbor information."
|
|
INDEX { nsOspfVirtNbrArea, nsOspfVirtNbrRtrId, nsOspfVirtNbrVRID }
|
|
::= { nsOspfVirtNbrTable 1 }
|
|
|
|
NsOspfVirtNbrEntry ::=
|
|
SEQUENCE {
|
|
nsOspfVirtNbrArea
|
|
AreaID,
|
|
nsOspfVirtNbrRtrId
|
|
RouterID,
|
|
nsOspfVirtNbrIpAddr
|
|
IpAddress,
|
|
nsOspfVirtNbrOptions
|
|
Integer32,
|
|
nsOspfVirtNbrState
|
|
INTEGER,
|
|
nsOspfVirtNbrEvents
|
|
Counter32,
|
|
nsOspfVirtNbrLsRetransQLen
|
|
Gauge32,
|
|
nsOspfVirtNbrHelloSuppressed
|
|
TruthValue,
|
|
nsOspfVirtNbrVRID
|
|
INTEGER
|
|
|
|
}
|
|
|
|
nsOspfVirtNbrArea OBJECT-TYPE
|
|
SYNTAX AreaID
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The Transit Area Identifier."
|
|
::= { nsOspfVirtNbrEntry 1 }
|
|
|
|
nsOspfVirtNbrRtrId OBJECT-TYPE
|
|
SYNTAX RouterID
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A 32-bit integer uniquely identifying the
|
|
neighboring router in the Autonomous System."
|
|
::= { nsOspfVirtNbrEntry 2 }
|
|
|
|
nsOspfVirtNbrIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The IP address this Virtual Neighbor is us-
|
|
ing."
|
|
::= { nsOspfVirtNbrEntry 3 }
|
|
|
|
nsOspfVirtNbrOptions OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A Bit Mask corresponding to the neighbor's op-
|
|
tions field.
|
|
|
|
Bit 1, if set, indicates that the system will
|
|
operate on Type of Service metrics other than
|
|
TOS 0. If zero, the neighbor will ignore all
|
|
metrics except the TOS 0 metric.
|
|
|
|
Bit 2, if set, indicates that the system is
|
|
Network Multicast capable; ie, that it imple-
|
|
ments OSPF Multicast Routing."
|
|
::= { nsOspfVirtNbrEntry 4 }
|
|
|
|
nsOspfVirtNbrState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
down (1),
|
|
attempt (2),
|
|
init (3),
|
|
twoWay (4),
|
|
exchangeStart (5),
|
|
exchange (6),
|
|
loading (7),
|
|
full (8)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The state of the Virtual Neighbor Relation-
|
|
ship."
|
|
::= { nsOspfVirtNbrEntry 5 }
|
|
|
|
nsOspfVirtNbrEvents OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The number of times this virtual link has
|
|
changed its state, or an error has occurred."
|
|
::= { nsOspfVirtNbrEntry 6 }
|
|
|
|
nsOspfVirtNbrLsRetransQLen OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The deprecated length of the retransmission
|
|
queue."
|
|
::= { nsOspfVirtNbrEntry 7 }
|
|
|
|
nsOspfVirtNbrHelloSuppressed OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Indicates whether Hellos are being suppressed
|
|
to the neighbor"
|
|
::= { nsOspfVirtNbrEntry 8 }
|
|
|
|
nsOspfVirtNbrVRID OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Virtual Router ID"
|
|
::= { nsOspfVirtNbrEntry 9 }
|
|
|
|
-- OSPF Link State Database, External
|
|
|
|
-- The Link State Database contains the Link State
|
|
-- Advertisements from throughout the areas that the
|
|
-- device is attached to.
|
|
|
|
-- This table is identical to the OSPF LSDB Table in
|
|
-- format, but contains only External Link State
|
|
-- Advertisements. The purpose is to allow external
|
|
-- LSAs to be displayed once for the router rather
|
|
-- than once in each non-stub area.
|
|
|
|
nsOspfExtLsdbTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NsOspfExtLsdbEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The OSPF Process's Links State Database."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12 Link State Adver-
|
|
tisements"
|
|
::= { nsOspf 12 }
|
|
|
|
nsOspfExtLsdbEntry OBJECT-TYPE
|
|
SYNTAX NsOspfExtLsdbEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A single Link State Advertisement."
|
|
INDEX { nsOspfExtLsdbType, nsOspfExtLsdbLsid, nsOspfExtLsdbRouterId, nsOspfExtLsdbVRID }
|
|
::= { nsOspfExtLsdbTable 1 }
|
|
|
|
NsOspfExtLsdbEntry ::=
|
|
SEQUENCE {
|
|
nsOspfExtLsdbType
|
|
INTEGER,
|
|
nsOspfExtLsdbLsid
|
|
IpAddress,
|
|
nsOspfExtLsdbRouterId
|
|
RouterID,
|
|
nsOspfExtLsdbSequence
|
|
Integer32,
|
|
nsOspfExtLsdbAge
|
|
Integer32,
|
|
nsOspfExtLsdbChecksum
|
|
Integer32,
|
|
nsOspfExtLsdbAdvertisement
|
|
OCTET STRING,
|
|
nsOspfExtLsdbVRID
|
|
INTEGER
|
|
}
|
|
|
|
nsOspfExtLsdbType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
asExternalLink (5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The type of the link state advertisement.
|
|
Each link state type has a separate advertise-
|
|
ment format."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix A.4.1 The Link State
|
|
Advertisement header"
|
|
::= { nsOspfExtLsdbEntry 1 }
|
|
|
|
nsOspfExtLsdbLsid OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The Link State ID is an LS Type Specific field
|
|
containing either a Router ID or an IP Address;
|
|
it identifies the piece of the routing domain
|
|
that is being described by the advertisement."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12.1.4 Link State ID"
|
|
::= { nsOspfExtLsdbEntry 2 }
|
|
|
|
nsOspfExtLsdbRouterId OBJECT-TYPE
|
|
SYNTAX RouterID
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The 32 bit number that uniquely identifies the
|
|
originating router in the Autonomous System."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.1 Global parameters"
|
|
::= { nsOspfExtLsdbEntry 3 }
|
|
|
|
-- Note that the OSPF Sequence Number is a 32 bit signed
|
|
-- integer. It starts with the value '80000001'h,
|
|
-- or -'7FFFFFFF'h, and increments until '7FFFFFFF'h
|
|
-- Thus, a typical sequence number will be very negative.
|
|
|
|
nsOspfExtLsdbSequence OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The sequence number field is a signed 32-bit
|
|
integer. It is used to detect old and dupli-
|
|
cate link state advertisements. The space of
|
|
sequence numbers is linearly ordered. The
|
|
larger the sequence number the more recent the
|
|
advertisement."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12.1.6 LS sequence
|
|
number"
|
|
::= { nsOspfExtLsdbEntry 4 }
|
|
|
|
nsOspfExtLsdbAge OBJECT-TYPE
|
|
SYNTAX Integer32 -- Should be 0..MaxAge
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This field is the age of the link state adver-
|
|
tisement in seconds."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12.1.1 LS age"
|
|
::= { nsOspfExtLsdbEntry 5 }
|
|
|
|
nsOspfExtLsdbChecksum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This field is the checksum of the complete
|
|
contents of the advertisement, excepting the
|
|
age field. The age field is excepted so that
|
|
an advertisement's age can be incremented
|
|
without updating the checksum. The checksum
|
|
used is the same that is used for ISO connec-
|
|
tionless datagrams; it is commonly referred to
|
|
as the Fletcher checksum."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12.1.7 LS checksum"
|
|
::= { nsOspfExtLsdbEntry 6 }
|
|
|
|
nsOspfExtLsdbAdvertisement OBJECT-TYPE
|
|
|
|
SYNTAX OCTET STRING (SIZE(36))
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The entire Link State Advertisement, including
|
|
its header."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12 Link State Adver-
|
|
tisements"
|
|
::= { nsOspfExtLsdbEntry 7 }
|
|
|
|
nsOspfExtLsdbVRID OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Virtual Router ID"
|
|
::= { nsOspfExtLsdbEntry 8 }
|
|
|
|
|
|
--
|
|
-- The OSPF Area Aggregate Table
|
|
--
|
|
-- This table replaces the OSPF Area Summary Table, being an
|
|
-- extension of that for CIDR routers.
|
|
|
|
nsOspfAreaAggregateTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NsOspfAreaAggregateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A range of IP addresses specified by an IP
|
|
address/IP network mask pair. For example,
|
|
class B address range of X.X.X.X with a network
|
|
mask of 255.255.0.0 includes all IP addresses
|
|
from X.X.0.0 to X.X.255.255. Note that if
|
|
ranges are configured such that one range sub-
|
|
sumes another range (e.g., 10.0.0.0 mask
|
|
255.0.0.0 and 10.1.0.0 mask 255.255.0.0), the
|
|
most specific match is the preferred one."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.2 Area parameters"
|
|
::= { nsOspf 14 }
|
|
|
|
nsOspfAreaAggregateEntry OBJECT-TYPE
|
|
SYNTAX NsOspfAreaAggregateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A range of IP addresses specified by an IP
|
|
address/IP network mask pair. For example,
|
|
class B address range of X.X.X.X with a network
|
|
mask of 255.255.0.0 includes all IP addresses
|
|
from X.X.0.0 to X.X.255.255. Note that if
|
|
ranges are range configured such that one range
|
|
subsumes another range (e.g., 10.0.0.0 mask
|
|
255.0.0.0 and 10.1.0.0 mask 255.255.0.0), the
|
|
|
|
most specific match is the preferred one."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.2 Area parameters"
|
|
INDEX { nsOspfAreaAggregateAreaID, nsOspfAreaAggregateLsdbType,
|
|
nsOspfAreaAggregateNet, nsOspfAreaAggregateMask, nsOspfAreaAggregateVRID }
|
|
::= { nsOspfAreaAggregateTable 1 }
|
|
|
|
NsOspfAreaAggregateEntry ::=
|
|
SEQUENCE {
|
|
nsOspfAreaAggregateAreaID
|
|
AreaID,
|
|
nsOspfAreaAggregateLsdbType
|
|
INTEGER,
|
|
nsOspfAreaAggregateNet
|
|
IpAddress,
|
|
nsOspfAreaAggregateMask
|
|
IpAddress,
|
|
nsOspfAreaAggregateStatus
|
|
RowStatus,
|
|
nsOspfAreaAggregateEffect
|
|
INTEGER,
|
|
nsOspfAreaAggregateVRID
|
|
INTEGER
|
|
}
|
|
|
|
nsOspfAreaAggregateAreaID OBJECT-TYPE
|
|
SYNTAX AreaID
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The Area the Address Aggregate is to be found
|
|
within."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.2 Area parameters"
|
|
::= { nsOspfAreaAggregateEntry 1 }
|
|
|
|
nsOspfAreaAggregateLsdbType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
summaryLink (3),
|
|
nssaExternalLink (7)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The type of the Address Aggregate. This field
|
|
specifies the Lsdb type that this Address Ag-
|
|
gregate applies to."
|
|
REFERENCE
|
|
|
|
"OSPF Version 2, Appendix A.4.1 The Link State
|
|
Advertisement header"
|
|
::= { nsOspfAreaAggregateEntry 2 }
|
|
|
|
nsOspfAreaAggregateNet OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The IP Address of the Net or Subnet indicated
|
|
by the range."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.2 Area parameters"
|
|
::= { nsOspfAreaAggregateEntry 3 }
|
|
|
|
nsOspfAreaAggregateMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The Subnet Mask that pertains to the Net or
|
|
Subnet."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.2 Area parameters"
|
|
::= { nsOspfAreaAggregateEntry 4 }
|
|
|
|
nsOspfAreaAggregateStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This variable displays the status of the en-
|
|
try. Setting it to 'invalid' has the effect of
|
|
rendering it inoperative. The internal effect
|
|
(row removal) is implementation dependent."
|
|
::= { nsOspfAreaAggregateEntry 5 }
|
|
|
|
nsOspfAreaAggregateEffect OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
advertiseMatching (1),
|
|
doNotAdvertiseMatching (2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS deprecated
|
|
|
|
DESCRIPTION
|
|
"Subnets subsumed by ranges either trigger the
|
|
advertisement of the indicated aggregate (ad-
|
|
vertiseMatching), or result in the subnet's not
|
|
being advertised at all outside the area."
|
|
DEFVAL { advertiseMatching }
|
|
::= { nsOspfAreaAggregateEntry 6 }
|
|
|
|
nsOspfAreaAggregateVRID OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Virtual Router ID"
|
|
::= { nsOspfAreaAggregateEntry 7 }
|
|
|
|
END
|
|
|
|
|