mibs/MIBS/screenos/NETSCREEN-OSPF-TRAP-MIB
2023-12-05 12:25:34 +01:00

445 lines
16 KiB
Plaintext

-- These MIBs were created on 1/7/2003
-- This module defines enterprise MIBs for NS OSPF TRAP
--
-- Copyright (c) 1999-2004, Juniper Networks, Inc.
-- All rights reserved.
NETSCREEN-OSPF-TRAP-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, IpAddress
FROM SNMPv2-SMI
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
netscreenTrapDesc, netscreenTrapType
FROM NETSCREEN-TRAP-MIB
nsOspfRouterId, nsOspfIfIpAddress, nsOspfAddressLessIf, nsOspfIfState,
nsOspfVirtIfAreaId, nsOspfVirtIfNeighbor, nsOspfVirtIfState,
nsOspfNbrIpAddr, nsOspfNbrAddressLessIndex, nsOspfNbrRtrId,
nsOspfNbrState, nsOspfVirtNbrArea, nsOspfVirtNbrRtrId, nsOspfVirtNbrState,
nsOspfLsdbType, nsOspfLsdbLsid, nsOspfLsdbRouterId, nsOspfLsdbAreaId,
nsOspfExtLsdbLimit, nsOspf
FROM NETSCREEN-OSPF-MIB;
nsOspfTrap MODULE-IDENTITY
LAST-UPDATED "200405032022Z" -- May 03, 2004
ORGANIZATION
"Juniper Networks, Inc."
CONTACT-INFO
"Customer Support
1194 North Mathilda Avenue
Sunnyvale, California 94089-1206
USA
Tel: 1-800-638-8296
E-mail: customerservice@juniper.net
HTTP://www.juniper.net"
DESCRIPTION
"The MIB module to describe traps for the OSPF
Version 2 Protocol."
::= { nsOspf 16 }
-- Trap Support Objects
-- The following are support objects for the OSPF traps.
nsOspfTrapControl OBJECT IDENTIFIER ::= { nsOspfTrap 1 }
nsOspfTraps OBJECT IDENTIFIER ::= { nsOspfTrap 2 }
nsOspfSetTrap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A four-octet string serving as a bit map for
the trap events defined by the OSPF traps. This
object is used to enable and disable specific
OSPF traps where a 1 in the bit field
represents enabled. The right-most bit (least
significant) represents trap 0."
::= { nsOspfTrapControl 1 }
nsOspfConfigErrorType OBJECT-TYPE
SYNTAX INTEGER {
badVersion (1),
areaMismatch (2),
unknownNbmaNbr (3), -- Router is Dr eligible
unknownVirtualNbr (4),
authTypeMismatch(5),
authFailure (6),
netMaskMismatch (7),
helloIntervalMismatch (8),
deadIntervalMismatch (9),
optionMismatch (10) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Potential types of configuration conflicts.
Used by the nsOspfConfigError and nsOspfConfigVir-
tError traps."
::= { nsOspfTrapControl 2 }
nsOspfPacketType OBJECT-TYPE
SYNTAX INTEGER {
hello (1),
dbDescript (2),
lsReq (3),
lsUpdate (4),
lsAck (5) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"OSPF packet types."
::= { nsOspfTrapControl 3 }
nsOspfPacketSrc OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of an inbound packet that can-
not be identified by a neighbor instance."
::= { nsOspfTrapControl 4 }
-- Traps
nsOspfIfStateChange NOTIFICATION-TYPE
OBJECTS {
netscreenTrapType,
netscreenTrapDesc,
nsOspfRouterId, -- The originator of the trap
nsOspfIfIpAddress,
nsOspfAddressLessIf,
nsOspfIfState, -- The new state
nsOspfIfVRID
}
STATUS current
DESCRIPTION
"An nsOspfIfStateChange trap signifies that there
has been a change in the state of a non-virtual
OSPF interface. This trap should be generated
when the interface state regresses (e.g., goes
from Dr to Down) or progresses to a terminal
state (i.e., Point-to-Point, DR Other, Dr, or
Backup)."
::= { nsOspfTraps 16 }
nsOspfVirtIfStateChange NOTIFICATION-TYPE
OBJECTS {
netscreenTrapType,
netscreenTrapDesc,
nsOspfRouterId, -- The originator of the trap
nsOspfVirtIfAreaId,
nsOspfVirtIfNeighbor,
nsOspfVirtIfState, -- The new state
nsOspfVirtIfVRID
}
STATUS current
DESCRIPTION
"An nsOspfIfStateChange trap signifies that there
has been a change in the state of an OSPF vir-
tual interface.
This trap should be generated when the inter-
face state regresses (e.g., goes from Point-
to-Point to Down) or progresses to a terminal
state (i.e., Point-to-Point)."
::= { nsOspfTraps 1 }
nsOspfNbrStateChange NOTIFICATION-TYPE
OBJECTS {
netscreenTrapType,
netscreenTrapDesc,
nsOspfRouterId, -- The originator of the trap
nsOspfNbrIpAddr,
nsOspfNbrAddressLessIndex,
nsOspfNbrRtrId,
nsOspfNbrState, -- The new state
nsOspfNbrVRID
}
STATUS current
DESCRIPTION
"An nsOspfNbrStateChange trap signifies that
there has been a change in the state of a non-
virtual OSPF neighbor. This trap should be
generated when the neighbor state regresses
(e.g., goes from Attempt or Full to 1-Way or
Down) or progresses to a terminal state (e.g.,
2-Way or Full). When an neighbor transitions
from or to Full on non-broadcast multi-access
and broadcast networks, the trap should be gen-
erated by the designated router. A designated
router transitioning to Down will be noted by
nsOspfIfStateChange."
::= { nsOspfTraps 2 }
nsOspfVirtNbrStateChange NOTIFICATION-TYPE
OBJECTS {
netscreenTrapType,
netscreenTrapDesc,
nsOspfRouterId, -- The originator of the trap
nsOspfVirtNbrArea,
nsOspfVirtNbrRtrId,
nsOspfVirtNbrState, -- The new state
nsOspfVirtNbrVRID
}
STATUS current
DESCRIPTION
"An nsOspfIfStateChange trap signifies that there
has been a change in the state of an OSPF vir-
tual neighbor. This trap should be generated
when the neighbor state regresses (e.g., goes
from Attempt or Full to 1-Way or Down) or
progresses to a terminal state (e.g., Full)."
::= { nsOspfTraps 3 }
nsOspfIfConfigError NOTIFICATION-TYPE
OBJECTS {
netscreenTrapType,
netscreenTrapDesc,
nsOspfRouterId, -- The originator of the trap
nsOspfIfIpAddress,
nsOspfAddressLessIf,
nsOspfPacketSrc, -- The source IP address
nsOspfConfigErrorType, -- Type of error
nsOspfPacketType,
nsOspfIfVRID
}
STATUS current
DESCRIPTION
"An nsOspfIfConfigError trap signifies that a
packet has been received on a non-virtual in-
terface from a router whose configuration
parameters conflict with this router's confi-
guration parameters. Note that the event op-
tionMismatch should cause a trap only if it
prevents an adjacency from forming."
::= { nsOspfTraps 4 }
nsOspfVirtIfConfigError NOTIFICATION-TYPE
OBJECTS {
netscreenTrapType,
netscreenTrapDesc,
nsOspfRouterId, -- The originator of the trap
nsOspfVirtIfAreaId,
nsOspfVirtIfNeighbor,
nsOspfConfigErrorType, -- Type of error
nsOspfPacketType,
nsOspfVirtIfVRID
}
STATUS current
DESCRIPTION
"An nsOspfConfigError trap signifies that a pack-
et has been received on a virtual interface
from a router whose configuration parameters
conflict with this router's configuration
parameters. Note that the event optionMismatch
should cause a trap only if it prevents an ad-
jacency from forming."
::= { nsOspfTraps 5 }
nsOspfIfAuthFailure NOTIFICATION-TYPE
OBJECTS {
netscreenTrapType,
netscreenTrapDesc,
nsOspfRouterId, -- The originator of the trap
nsOspfIfIpAddress,
nsOspfAddressLessIf,
nsOspfPacketSrc, -- The source IP address
nsOspfConfigErrorType, -- authTypeMismatch or
-- authFailure
nsOspfPacketType,
nsOspfIfVRID
}
STATUS current
DESCRIPTION
"An nsOspfIfAuthFailure trap signifies that a
packet has been received on a non-virtual in-
terface from a router whose authentication key
or authentication type conflicts with this
router's authentication key or authentication
type."
::= { nsOspfTraps 6 }
nsOspfVirtIfAuthFailure NOTIFICATION-TYPE
OBJECTS {
netscreenTrapType,
netscreenTrapDesc,
nsOspfRouterId, -- The originator of the trap
nsOspfVirtIfAreaId,
nsOspfVirtIfNeighbor,
nsOspfConfigErrorType, -- authTypeMismatch or
-- authFailure
nsOspfPacketType,
nsOspfVirtIfVRID
}
STATUS current
DESCRIPTION
"An nsOspfVirtIfAuthFailure trap signifies that a
packet has been received on a virtual interface
from a router whose authentication key or au-
thentication type conflicts with this router's
authentication key or authentication type."
::= { nsOspfTraps 7 }
nsOspfIfRxBadPacket NOTIFICATION-TYPE
OBJECTS {
netscreenTrapType,
netscreenTrapDesc,
nsOspfRouterId, -- The originator of the trap
nsOspfIfIpAddress,
nsOspfAddressLessIf,
nsOspfPacketSrc, -- The source IP address
nsOspfPacketType,
nsOspfIfVRID
}
STATUS current
DESCRIPTION
"An nsOspfIfRxBadPacket trap signifies that an
OSPF packet has been received on a non-virtual
interface that cannot be parsed."
::= { nsOspfTraps 8 }
nsOspfVirtIfRxBadPacket NOTIFICATION-TYPE
OBJECTS {
netscreenTrapType,
netscreenTrapDesc,
nsOspfRouterId, -- The originator of the trap
nsOspfVirtIfAreaId,
nsOspfVirtIfNeighbor,
nsOspfPacketType,
nsOspfVirtIfVRID
}
STATUS current
DESCRIPTION
"An nsOspfRxBadPacket trap signifies that an OSPF
packet has been received on a virtual interface
that cannot be parsed."
::= { nsOspfTraps 9 }
nsOspfTxRetransmit NOTIFICATION-TYPE
OBJECTS {
netscreenTrapType,
netscreenTrapDesc,
nsOspfRouterId, -- The originator of the trap
nsOspfIfIpAddress,
nsOspfAddressLessIf,
nsOspfNbrRtrId, -- Destination
nsOspfPacketType,
nsOspfLsdbType,
nsOspfLsdbLsid,
nsOspfLsdbRouterId,
nsOspfLsdbVRID
}
STATUS current
DESCRIPTION
"An nsOspfTxRetransmit trap signifies than an
OSPF packet has been retransmitted on a non-
virtual interface. All packets that may be re-
transmitted are associated with an LSDB entry.
The LS type, LS ID, and Router ID are used to
identify the LSDB entry."
::= { nsOspfTraps 10 }
nsOspfVirtIfTxRetransmit NOTIFICATION-TYPE
OBJECTS {
netscreenTrapType,
netscreenTrapDesc,
nsOspfRouterId, -- The originator of the trap
nsOspfVirtIfAreaId,
nsOspfVirtIfNeighbor,
nsOspfPacketType,
nsOspfLsdbType,
nsOspfLsdbLsid,
nsOspfLsdbRouterId,
nsOspfLsdbVRID
}
STATUS current
DESCRIPTION
"An nsOspfTxRetransmit trap signifies than an
OSPF packet has been retransmitted on a virtual
interface. All packets that may be retransmit-
ted are associated with an LSDB entry. The LS
type, LS ID, and Router ID are used to identify
the LSDB entry."
::= { nsOspfTraps 11 }
nsOspfOriginateLsa NOTIFICATION-TYPE
OBJECTS {
netscreenTrapType,
netscreenTrapDesc,
nsOspfRouterId, -- The originator of the trap
nsOspfLsdbAreaId, -- 0.0.0.0 for AS Externals
nsOspfLsdbType,
nsOspfLsdbLsid,
nsOspfLsdbRouterId,
nsOspfLsdbVRID
}
STATUS current
DESCRIPTION
"An nsOspfOriginateLsa trap signifies that a new
LSA has been originated by this router. This
trap should not be invoked for simple refreshes
of LSAs (which happesn every 30 minutes), but
instead will only be invoked when an LSA is
(re)originated due to a topology change. Addi-
tionally, this trap does not include LSAs that
are being flushed because they have reached
MaxAge."
::= { nsOspfTraps 12 }
nsOspfMaxAgeLsa NOTIFICATION-TYPE
OBJECTS {
netscreenTrapType,
netscreenTrapDesc,
nsOspfRouterId, -- The originator of the trap
nsOspfLsdbAreaId, -- 0.0.0.0 for AS Externals
nsOspfLsdbType,
nsOspfLsdbLsid,
nsOspfLsdbRouterId,
nsOspfLsdbVRID
}
STATUS current
DESCRIPTION
"An nsOspfMaxAgeLsa trap signifies that one of
the LSA in the router's link-state database has
aged to MaxAge."
::= { nsOspfTraps 13 }
nsOspfLsdbOverflow NOTIFICATION-TYPE
OBJECTS {
netscreenTrapType,
netscreenTrapDesc,
nsOspfRouterId, -- The originator of the trap
nsOspfExtLsdbLimit,
nsOspfLsdbVRID
}
STATUS current
DESCRIPTION
"An nsOspfLsdbOverflow trap signifies that the
number of LSAs in the router's link-state data-
base has exceeded nsOspfExtLsdbLimit."
::= { nsOspfTraps 14 }
nsOspfLsdbApproachingOverflow NOTIFICATION-TYPE
OBJECTS {
netscreenTrapType,
netscreenTrapDesc,
nsOspfRouterId, -- The originator of the trap
nsOspfExtLsdbLimit,
nsOspfLsdbVRID
}
STATUS current
DESCRIPTION
"An nsOspfLsdbApproachingOverflow trap signifies
that the number of LSAs in the router's link-
state database has exceeded ninety percent of
nsOspfExtLsdbLimit."
::= { nsOspfTraps 15 }
END