mibs/MIBS/screenos/NETSCREEN-QOS-MIB
2023-12-05 12:25:34 +01:00

175 lines
4.4 KiB
Plaintext

-- This module defines enterprise MIBs for QoS
--
-- Copyright (c) 1999-2004, Juniper Networks, Inc.
-- All rights reserved.
NETSCREEN-QOS-MIB DEFINITIONS ::= BEGIN
IMPORTS
netscreenQos
FROM NETSCREEN-SMI
Integer32, MODULE-IDENTITY, OBJECT-TYPE
FROM SNMPv2-SMI
;
netscreenQosMibModule MODULE-IDENTITY
LAST-UPDATED "200405032022Z" -- May 03, 2004
ORGANIZATION
"Juniper Networks, Inc."
CONTACT-INFO
"Customer Support
1194 North Mathilda Avenue
Sunnyvale, California 94089-1206
USA
Tel: 1-800-638-8296
E-mail: customerservice@juniper.net
HTTP://www.juniper.net"
DESCRIPTION
"This module defines the object that are used to monitor QoS"
REVISION "200405030000Z" -- May 03, 2004
DESCRIPTION
"Modified copyright and contact information"
REVISION "200403030000Z" -- March 03, 2004
DESCRIPTION
"Converted to SMIv2 by Longview Software"
REVISION "200109280000Z" -- September 28, 2001
DESCRIPTION
"No Comment"
REVISION "200105150000Z" -- May 15, 2001
DESCRIPTION
"Creation Date"
::= { netscreenQos 0 }
NsQosPlyEntry ::= SEQUENCE
{
nsQosPlyId Integer32,
nsQosPlyVsys Integer32,
nsQosPlyQosEnable INTEGER,
nsQosPlyGanBW Integer32,
nsQosPlyMaxBW Integer32,--,
nsQosPlyTraffPriority Integer32,
nsQosPlyDSEnable INTEGER
}
nsQosUsrShapingMode OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1),
on-off(2),
off-on(3),
auto(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"QoS mode set by user"
::= { netscreenQos 1 }
nsQosSysShapingMode OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1),
on-off(2),
off-on(3),
auto(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"QoS mode currently set by the system"
::= { netscreenQos 2 }
nsQosPly OBJECT IDENTIFIER ::= { netscreenQos 3 }
nsQosPlyTable OBJECT-TYPE
SYNTAX SEQUENCE OF NsQosPlyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"QoS is the allocation of the appropriate amount of
network bandwidth to every user and application on an interface.
This table collects all the QoS configuration
setting on each physical interface."
::= { nsQosPly 1 }
nsQosPlyEntry OBJECT-TYPE
SYNTAX NsQosPlyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry holds a set of attributes for QoS"
INDEX
{ nsQosPlyId }
::= { nsQosPlyTable 1 }
nsQosPlyId OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A unique policy id, also used as table index."
::= { nsQosPlyEntry 1 }
nsQosPlyVsys OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VSYS this policy belongs to."
::= { nsQosPlyEntry 2 }
nsQosPlyQosEnable OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable QoS on this policy."
::= { nsQosPlyEntry 3 }
nsQosPlyGanBW OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Guaranteed Bandwidth (in bytes per second). When Qos Enable
is off, the value has no meaning."
::= { nsQosPlyEntry 4 }
nsQosPlyMaxBW OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maxium Bandwidth (in bytes per second). When Qos Enable is
off, the value has no meaning. Negative value means it is not
set yet."
::= { nsQosPlyEntry 5 }
nsQosPlyTraffPriority OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Traffic priority for this policy. Zero is the highest
priority and seven is the lowest."
::= { nsQosPlyEntry 6 }
nsQosPlyDSEnable OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable DiffServ codepoint marking on this policy."
::= { nsQosPlyEntry 7 }
END