david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
mibs/MIBS/siemens/SN-MSPS-SCX200-MIB
David Leutgeb 98a672123c Initial commit
2023-12-05 12:25:34 +01:00

26230 lines
982 KiB
Plaintext
Raw Blame History

-- Automatically generated by MIB Converter ...
-- ----------------------------------------------------------------------
-- scalance_x200_msps.mib
-- SIMATIC NET Industrial Ethernet Scalance
-- MSPS Private MIB
-- Copyright (c) 2012 Siemens AG
-- ----------------------------------------------------------------------
--
-- MIB Module : SN-MSPS-SCX200-MIB
--
-- Revision : V04.02.00
-- Date : 2020-04-24 19:30:08
--
-- ----------------------------------------------------------------------
SN-MSPS-SCX200-MIB DEFINITIONS ::= BEGIN
IMPORTS
DisplayString FROM RFC1213-MIB
MODULE-COMPLIANCE,
OBJECT-GROUP,
NOTIFICATION-GROUP FROM SNMPv2-CONF
enterprises FROM RFC1155-SMI
PaeControlledPortStatus FROM IEEE8021-PAE-MIB
BridgeId,
Timeout FROM BRIDGE-MIB
InterfaceIndex,
ifIndex,
InterfaceIndexOrZero FROM IF-MIB
InetAddress,
InetAddressType,
InetAddressPrefixLength,
InetAddressIPv4,
InetPortNumber,
InetVersion,
InetZoneIndex,
InetAutonomousSystemNumber FROM INET-ADDRESS-MIB
TRAP-TYPE FROM RFC-1215
SnmpEngineID,
SnmpAdminString FROM SNMP-FRAMEWORK-MIB
snmpTargetAddrEntry FROM SNMP-TARGET-MIB
EnabledStatus FROM P-BRIDGE-MIB
Counter32,
Integer32,
Unsigned32,
enterprises,
OBJECT-TYPE,
OBJECT-IDENTITY,
NOTIFICATION-TYPE,
MODULE-IDENTITY,
TimeTicks,
IpAddress,
Gauge32,
mib-2 FROM SNMPv2-SMI
PortList,
VlanId,
dot1qVlanIndex,
dot1qStaticUnicastEntry,
dot1qTpFdbEntry,
dot1qFdbEntry,
dot1qFdbId,
dot1qStaticUnicastAddress,
dot1qStaticUnicastReceivePort,
dot1qStaticMulticastAddress,
dot1qStaticMulticastReceivePort,
VlanIdOrNone,
dot1qVlanStaticEntry,
VlanIndex FROM Q-BRIDGE-MIB
pethPsePortEntry,
pethMainPseEntry FROM POWER-ETHERNET-MIB
RowStatus,
DateAndTime,
MacAddress,
TruthValue,
DisplayString,
TEXTUAL-CONVENTION,
StorageType FROM SNMPv2-TC
IANAipRouteProtocol FROM IANA-RTPROTO-MIB;
org OBJECT IDENTIFIER ::= { iso 3}
dod OBJECT IDENTIFIER ::= { org 6}
internet OBJECT IDENTIFIER ::= { dod 1}
private OBJECT IDENTIFIER ::= { internet 4}
enterprises OBJECT IDENTIFIER ::= { private 1}
siemens OBJECT IDENTIFIER ::= { enterprises 4329}
industrialComProducts OBJECT IDENTIFIER ::= { siemens 20}
iComPlatforms OBJECT IDENTIFIER ::= { industrialComProducts 1}
simaticNet OBJECT IDENTIFIER ::= { iComPlatforms 1}
snMsps OBJECT IDENTIFIER ::= { simaticNet 1}
snMspsCommon OBJECT IDENTIFIER ::= { snMsps 1}
snMspsModules OBJECT IDENTIFIER ::= { snMsps 3}
snMspsTrapPrefix OBJECT IDENTIFIER ::= { snMsps 0}
snMspsAcl OBJECT IDENTIFIER ::= { snMspsCommon 30}
snMspsCableTester OBJECT IDENTIFIER ::= { snMspsCommon 44}
snMspsConfig OBJECT IDENTIFIER ::= { snMspsCommon 1}
snMspsCplug OBJECT IDENTIFIER ::= { snMspsCommon 23}
snMspsDas OBJECT IDENTIFIER ::= { snMspsCommon 83}
snMspsDhcp OBJECT IDENTIFIER ::= { snMspsCommon 17}
snMspsDiagnostics OBJECT IDENTIFIER ::= { snMspsCommon 79}
snMspsDot1ad OBJECT IDENTIFIER ::= { snMspsCommon 81}
snMspsDst OBJECT IDENTIFIER ::= { snMspsCommon 54}
snMspsDualNetAccess OBJECT IDENTIFIER ::= { snMspsCommon 88}
snMspsEthernetIp OBJECT IDENTIFIER ::= { snMspsCommon 62}
snMspsGeneral OBJECT IDENTIFIER ::= { snMspsCommon 2}
snMspsGuestVlan OBJECT IDENTIFIER ::= { snMspsCommon 55}
snMspsHttp OBJECT IDENTIFIER ::= { snMspsCommon 20}
snMspsIf OBJECT IDENTIFIER ::= { snMspsCommon 34}
snMspsIp OBJECT IDENTIFIER ::= { snMspsCommon 13}
snMspsIpACD OBJECT IDENTIFIER ::= { snMspsCommon 63}
snMspsKeyPlug OBJECT IDENTIFIER ::= { snMspsCommon 35}
snMspsLa OBJECT IDENTIFIER ::= { snMspsCommon 5}
snMspsLinkCheck OBJECT IDENTIFIER ::= { snMspsCommon 82}
snMspsLoadSave OBJECT IDENTIFIER ::= { snMspsCommon 26}
snMspsLog OBJECT IDENTIFIER ::= { snMspsCommon 31}
snMspsLoopDetection OBJECT IDENTIFIER ::= { snMspsCommon 36}
snMspsMacAuth OBJECT IDENTIFIER ::= { snMspsCommon 56}
snMspsMstp OBJECT IDENTIFIER ::= { snMspsCommon 6}
snMspsNatv2 OBJECT IDENTIFIER ::= { snMspsCommon 75}
snMspsNtp OBJECT IDENTIFIER ::= { snMspsCommon 33}
snMspsPnac OBJECT IDENTIFIER ::= { snMspsCommon 10}
snMspsPnio OBJECT IDENTIFIER ::= { snMspsCommon 32}
snMspsPoe OBJECT IDENTIFIER ::= { snMspsCommon 38}
snMspsPort OBJECT IDENTIFIER ::= { snMspsCommon 29}
snMspsPtp OBJECT IDENTIFIER ::= { snMspsCommon 37}
snMspsQos OBJECT IDENTIFIER ::= { snMspsCommon 22}
snMspsRadius OBJECT IDENTIFIER ::= { snMspsCommon 11}
snMspsRedundancy OBJECT IDENTIFIER ::= { snMspsCommon 24}
snMspsReport OBJECT IDENTIFIER ::= { snMspsCommon 28}
snMspsRmon OBJECT IDENTIFIER ::= { snMspsCommon 12}
snMspsSfp OBJECT IDENTIFIER ::= { snMspsCommon 46}
snMspsSinema OBJECT IDENTIFIER ::= { snMspsCommon 25}
snMspsSnmp OBJECT IDENTIFIER ::= { snMspsCommon 4}
snMspsSnooping OBJECT IDENTIFIER ::= { snMspsCommon 9}
snMspsSntp OBJECT IDENTIFIER ::= { snMspsCommon 19}
snMspsSyslog OBJECT IDENTIFIER ::= { snMspsCommon 21}
snMspsTc OBJECT IDENTIFIER ::= { snMspsModules 1}
snMspsVlan OBJECT IDENTIFIER ::= { snMspsCommon 3}
snMspsDhcpClient OBJECT IDENTIFIER ::= { snMspsDhcp 1}
snMspsDhcpRelay OBJECT IDENTIFIER ::= { snMspsDhcp 3}
snMspsDhcpServer OBJECT IDENTIFIER ::= { snMspsDhcp 2}
snMspsQosAgentMac OBJECT IDENTIFIER ::= { snMspsQos 16}
snMspsQosBcast OBJECT IDENTIFIER ::= { snMspsQos 14}
snMspsQosCos OBJECT IDENTIFIER ::= { snMspsQos 3}
snMspsQosCosPort OBJECT IDENTIFIER ::= { snMspsQos 12}
snMspsQosDscp OBJECT IDENTIFIER ::= { snMspsQos 4}
snMspsQosSchedule OBJECT IDENTIFIER ::= { snMspsQos 10}
snMspsRadiusServer OBJECT IDENTIFIER ::= { snMspsRadius 2}
snMspsRedundancyExt OBJECT IDENTIFIER ::= { snMspsRedundancy 4}
snMspsRingRedundancy OBJECT IDENTIFIER ::= { snMspsRedundancy 1}
snMspsRingRedundancyMrpIntercon OBJECT IDENTIFIER ::= { snMspsRedundancy 5}
snMspsRingRedundancyObserver OBJECT IDENTIFIER ::= { snMspsRedundancy 3}
snMspsRingRedundancyStandby OBJECT IDENTIFIER ::= { snMspsRedundancy 2}
snMspsSntpClient OBJECT IDENTIFIER ::= { snMspsSntp 1}
snMspsSyslogClient OBJECT IDENTIFIER ::= { snMspsSyslog 1}
SnMspsOrderNumber ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "The format of type identification / order
numbers of Siemens MSPS products."
SYNTAX OCTET STRING (SIZE (1|5..32))
SnMspsSerialNumber ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "The format of serial numbers of
Siemens MSPS products."
SYNTAX OCTET STRING (SIZE (1|5..32))
SnMspsVersionNumber ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "The version format of Siemens MSPS in a
simplified OSLO form :
[RCSTBPVKD][0-9]{1,2}\.[0-9]{1,2}\.[0-9]{1,2}
"
SYNTAX OCTET STRING (SIZE (5..32))
SnMspsMacAddress ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "
A six octet string (48-bit), using the
hexadecimal representation, in canonical
order specified by IEEE Std 802
(Overview and Architecture,
formerly IEEE Std 802.1a).
Shorter MAC address values than 48 bits, if
used, are represented by setting their
unused upper octets to all 0's, i.e.,
the 16-bit address AAFF shall be
represented as 00000000AAFF.
"
SYNTAX OCTET STRING (SIZE (6))
SnMspsIpAddress ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "
An octet string which represents either a
IPv4 address or a IPv6a ddress or
a DNS compliant name.
"
SYNTAX OCTET STRING
SnMspsStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "A uniform representation of status values."
SYNTAX INTEGER { invalid(0), enable(1), disable(2) }
SnMspsTrigger ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "A uniform representation of trigger values"
SYNTAX INTEGER { trigger(1), notTriggered(2) }
SnMspsFunctionString ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "
The format of function tags according
IEC 61158-6-10, chapter 6.2.4.83.13.
The value shall be filled with blanks
if it is shorter than 32.
Non-printable characters and
control sequences are not allowed.
"
SYNTAX DisplayString (SIZE (32))
SnMspsLocationString ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "
The format of function tags according
IEC 61158-6-10, chapter 6.2.4.83.14.
The value shall be filled with blanks
if it is shorter than 22.
Non-printable characters and
control sequences are not allowed.
"
SYNTAX DisplayString (SIZE (22))
-- ----------------------------------------------------------------
-- MSPS General Groups
-- ----------------------------------------------------------------
-- ----------------------------------------------------------------
-- MSPS General Objects
-- ----------------------------------------------------------------
snMspsGeneralDeviceType OBJECT-TYPE
SYNTAX DisplayString (SIZE (10..50))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Device Type of current product. This value is the part of
fully-qualified domain name, which is stored in sys-Name.
"
::= { snMspsGeneral 5 }
snMspsGeneralDeviceGroup OBJECT-TYPE
SYNTAX DisplayString (SIZE (10..50))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The group name of the device, which is used as a part
of the cplug device's identification data"
::= { snMspsGeneral 10 }
snMspsGeneralHwVersionTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsGeneralHwVersionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains version informations of all hardware
(basic device and extension cards), which are currently
available on the device."
::= { snMspsGeneral 20 }
snMspsGeneralHwVersionEntry OBJECT-TYPE
SYNTAX SnMspsGeneralHwVersionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry appears in this table for each hardware
in the system, which has a MLFB number."
INDEX { snMspsGeneralHwVersionTableIndex }
::= { snMspsGeneralHwVersionTable 1 }
SnMspsGeneralHwVersionEntry ::=
SEQUENCE {
snMspsGeneralHwVersionTableIndex
INTEGER,
snMspsGeneralHwType
DisplayString,
snMspsGeneralHwName
DisplayString,
snMspsGeneralHwRevision
DisplayString,
snMspsGeneralHwOrderId
SnMspsOrderNumber
}
snMspsGeneralHwVersionTableIndex OBJECT-TYPE
SYNTAX INTEGER (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This index correlates with entPhysicalIndex
from entPhysicalTable (ENTITY-MIB)."
::= { snMspsGeneralHwVersionEntry 1 }
snMspsGeneralHwType OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of hardware in readable format."
::= { snMspsGeneralHwVersionEntry 2 }
snMspsGeneralHwName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of hardware in readable format."
::= { snMspsGeneralHwVersionEntry 3 }
snMspsGeneralHwRevision OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of hardware revision."
::= { snMspsGeneralHwVersionEntry 4 }
snMspsGeneralHwOrderId OBJECT-TYPE
SYNTAX SnMspsOrderNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Order ID of hardware."
::= { snMspsGeneralHwVersionEntry 5 }
snMspsGeneralSwVersionTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsGeneralSwVersionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains version informations of software, which is currently
running on relevant hardware (basic device and extension cards)."
::= { snMspsGeneral 25 }
snMspsGeneralSwVersionEntry OBJECT-TYPE
SYNTAX SnMspsGeneralSwVersionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry appears in this table for each software
running in the system. Since the same kinds of software
could run on different hardware, which is available
on the device, the index from 'snMspsGeneralHwVersionTable'
is also used here."
INDEX { snMspsGeneralHwVersionTableIndex,
snMspsGeneralSwVersionTableIndex
}
::= { snMspsGeneralSwVersionTable 1 }
SnMspsGeneralSwVersionEntry ::=
SEQUENCE {
snMspsGeneralSwVersionTableIndex
INTEGER,
snMspsGeneralSwType
DisplayString,
snMspsGeneralSwRevision
SnMspsVersionNumber,
snMspsGeneralSwDate
DateAndTime,
snMspsGeneralSwDescription
DisplayString
}
snMspsGeneralSwVersionTableIndex OBJECT-TYPE
SYNTAX INTEGER (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The numerical index of software,
which is available on relevant hardware."
::= { snMspsGeneralSwVersionEntry 1 }
snMspsGeneralSwType OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of software in readable format."
::= { snMspsGeneralSwVersionEntry 2 }
snMspsGeneralSwRevision OBJECT-TYPE
SYNTAX SnMspsVersionNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of software revision."
::= { snMspsGeneralSwVersionEntry 3 }
snMspsGeneralSwDate OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The revision date of software."
::= { snMspsGeneralSwVersionEntry 4 }
snMspsGeneralSwDescription OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The description of software."
::= { snMspsGeneralSwVersionEntry 5 }
snMspsConfigLoginAuthentication OBJECT-TYPE
SYNTAX INTEGER {
local(1),
remoteRadius(2),
remoteTacacs(3),
radiusFallbackToLocal(4),
tacacsFallbackToLocal(5),
localFallbackToRadius(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configures the mechanism by which the user login has to be authenticated
for accessing the GUI to manage the switch. Authentication is done
either locally or in the remote side through a RADIUS Server or TACACS.
If Authentication is configured as radiusLocal or tacacsLocal then
Local authentication provides a back door or a secondary option
for authentication if the server fails."
DEFVAL { local }
::= { snMspsConfig 1 }
------ Config Control Group ------------------------------------
snMspsConfigCtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsConfigCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to control device features like egress traffic control,
stats collection, etc. either for the entire switch or for each
interface in the switch."
::= { snMspsConfig 2 }
snMspsConfigCtrlEntry OBJECT-TYPE
SYNTAX SnMspsConfigCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry appears in this table for each interface in the system.
In addition to that an entry with index '0' is created in this
table by default.
If 'snMspsConfigCtrlStatus' of the entry '0' is made 'valid', then
global control is chosen and the values against entry '0' is
applicable for all the interfaces of the switch.
If 'snMspsConfigCtrlStatus' of the entry '0' is made 'invalid',
then interface-wise control is chosen & the values against each
interface index is applicable for that interface.
At a particular point of time, either global control will be
applicable or interface-wise control is applicable.
Both will not be considered together.
Index to the table is the interface index of the port."
INDEX { snMspsConfigCtrlIndex }
::= { snMspsConfigCtrlTable 1 }
SnMspsConfigCtrlEntry ::=
SEQUENCE {
snMspsConfigCtrlIndex
Integer32,
snMspsConfigCtrlEgressStatus
INTEGER,
snMspsConfigCtrlStatsCollection
INTEGER,
snMspsConfigCtrlStatus
INTEGER
}
snMspsConfigCtrlIndex OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Interface index of the port for which the configuration
in this entry applies.
If any configuration is made in this table for the index '0',
that configuration will be considered as global configuration
and is applicable for all the interfaces of the switch."
::= { snMspsConfigCtrlEntry 1 }
snMspsConfigCtrlEgressStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Controls the transmission of egress traffic over this interface.
This value for entry '0' controls the egress traffic over all
interfaces."
DEFVAL { enabled }
::= { snMspsConfigCtrlEntry 2 }
snMspsConfigCtrlStatsCollection OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables statistics collection for this interface.
This value for entry '0' controls the stats collection for all
interfaces."
DEFVAL { enabled }
::= { snMspsConfigCtrlEntry 3 }
snMspsConfigCtrlStatus OBJECT-TYPE
SYNTAX INTEGER {
valid (1),
invalid (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Speficies the validity of the entry.
If the 'Config Control Status' for entry '0' is made 'valid',
then global control is chosen in the system.
It signifies that the values against entry '0' is applicable
for all the interfaces of the switch.
If the 'Config Control Status' for entry '0' is made 'invalid',
then interface-wise control is chosen.
Then the values against each interface index is applicable
for that interface.
By default, 'snMspsConfigCtrlStatus' will be 'invalid' for
entry '0' and 'valid' for all other entries.
(ie) by default, interface-wise configuration is enabled
in the system.
The status of entries other than the zeroth(0th) entry can not be
made 'invalid'."
::= { snMspsConfigCtrlEntry 4 }
-- Rate Control Group --------------------------------------------- --
snMspsConfigRateCtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsConfigRateCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to control the rate limiting parameters
either for the entire switch or for each physical and port-channel
interface in the switch."
::= { snMspsConfig 3 }
snMspsConfigRateCtrlEntry OBJECT-TYPE
SYNTAX SnMspsConfigRateCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry appears in this table for each physical and port-channel
interface in the switch."
INDEX { snMspsConfigRateCtrlIndex }
::= { snMspsConfigRateCtrlTable 1 }
SnMspsConfigRateCtrlEntry ::=
SEQUENCE {
snMspsConfigRateCtrlIndex
Integer32,
snMspsConfigRateCtrlDLFLimitValue
Integer32,
snMspsConfigRateCtrlBCASTLimitValue
Integer32,
snMspsConfigRateCtrlMCASTLimitValue
Integer32,
snMspsConfigRateCtrlPortRateLimit
Integer32,
snMspsConfigRateCtrlPortBurstSize
Integer32,
snMspsConfigRateCtrlUCASTLimitValue
Integer32
}
snMspsConfigRateCtrlIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The interface index for which the configuration in this
entry applies."
::= { snMspsConfigRateCtrlEntry 1 }
snMspsConfigRateCtrlDLFLimitValue OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allows to configure the limiting value for the maximum number
of dlf data that can be transmitted per second over this interface.
The unit of data is given by snMspsConfigRateCtrlUnit object.
Setting this object to the value zero disables rate limiting for
Destination lookup failure packets on this interface. The value that
can be set for this object is limited by the underlying hardware"
DEFVAL {0}
::= { snMspsConfigRateCtrlEntry 2 }
snMspsConfigRateCtrlBCASTLimitValue OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allows to configure the limiting value for the maximum number
of broadcast data that can be transmitted per second over this
interface. The unit of data is given by snMspsConfigRateCtrlUnit object.
Setting this object to the value zero disables rate
limiting for Broadcast packets on this interface. The value that
can be set for this object is limited by the underlying hardware"
DEFVAL {0}
::= { snMspsConfigRateCtrlEntry 3 }
snMspsConfigRateCtrlMCASTLimitValue OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allows to configure the limiting value for the maximum number
of multicast data that can be transmitted per second over this
interface. The unit of data is given by snMspsConfigRateCtrlUnit object.
Setting this object to the value zero disables rate
limiting for Multicast packets on this interface. The value that
can be set for this object is limited by the underlying hardware"
DEFVAL {0}
::= { snMspsConfigRateCtrlEntry 4}
snMspsConfigRateCtrlPortRateLimit OBJECT-TYPE
SYNTAX Integer32 (0..80000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configures interface Rate Limit (Packet that can be transferred
on a port at a particular second).
This object's value will take effect on the interface speed. Based
on the operating speed of the port, the rate limit will be applied.
This value can also be affected by the metering. A value of zero(0)
disable rate limiting i.e. sets the port to full speed."
::= { snMspsConfigRateCtrlEntry 5 }
snMspsConfigRateCtrlPortBurstSize OBJECT-TYPE
SYNTAX Integer32 (0..80000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configures interface Burst Pkt Rate. (Packet Burst that can be
transferred on a port at a particular second)
This object's value will take effect on the interface speed. Based
on the operating speed of the port, the burst size of the port
will be applied. This value can also be affected by the metering. A
value of zero(0) disable burst rate limiting i.e. sets the port burst
rate limit to full speed."
::= { snMspsConfigRateCtrlEntry 6 }
snMspsConfigRateCtrlUCASTLimitValue OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allows to configure the limiting value for the maximum number
of unicast data that can be transmitted per second over this
interface. The unit of data is given by snMspsConfigRateCtrlUnit object.
Setting this object to the value zero disables rate
limiting for Multicast packets on this interface. The value that
can be set for this object is limited by the underlying hardware"
DEFVAL {0}
::= { snMspsConfigRateCtrlEntry 7}
-- Rate Control Group --------------------------------------------- --
snMspsConfigAclRateCtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsConfigAclRateCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to control the rate limiting parameters
either for the entire switch or for each physical and port-channel
interface in the switch. Chip-Dependent!"
::= { snMspsConfig 4 }
snMspsConfigAclRateCtrlEntry OBJECT-TYPE
SYNTAX SnMspsConfigAclRateCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry appears in this table for each physical and port-channel
interface in the switch."
INDEX { snMspsConfigAclRateCtrlIndex }
::= { snMspsConfigAclRateCtrlTable 1 }
SnMspsConfigAclRateCtrlEntry ::=
SEQUENCE {
snMspsConfigAclRateCtrlIndex
Integer32,
snMspsConfigAclRateCtrlDLFLimitValue
Integer32,
snMspsConfigAclRateCtrlBCASTLimitValue
Integer32,
snMspsConfigAclRateCtrlMCASTLimitValue
Integer32,
snMspsConfigAclRateCtrlPortRateLimit
Integer32,
snMspsConfigAclRateCtrlPortBurstSize
Integer32
}
snMspsConfigAclRateCtrlIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The interface index for which the configuration in this
entry applies."
::= { snMspsConfigAclRateCtrlEntry 1 }
snMspsConfigAclRateCtrlDLFLimitValue OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allows to configure the limiting value for the maximum number
of dlf packets that can be transmitted per second over this interface.
Setting this object to the value zero disables rate limiting for
Destination lookup failure packets on this interface. The value that
can be set for this object is limited by the underlying hardware"
DEFVAL {0}
::= { snMspsConfigAclRateCtrlEntry 2 }
snMspsConfigAclRateCtrlBCASTLimitValue OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allows to configure the limiting value for the maximum number
of broadcast packets that can be transmitted per second over this
interface. Setting this object to the value zero disables rate
limiting for Broadcast packets on this interface. The value that
can be set for this object is limited by the underlying hardware"
DEFVAL {0}
::= { snMspsConfigAclRateCtrlEntry 3 }
snMspsConfigAclRateCtrlMCASTLimitValue OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allows to configure the limiting value for the maximum number
of multicast packets that can be transmitted per second over this
interface. Setting this object to the value zero disables rate
limiting for Multicast packets on this interface. The value that
can be set for this object is limited by the underlying hardware"
DEFVAL {0}
::= { snMspsConfigAclRateCtrlEntry 4}
snMspsConfigAclRateCtrlPortRateLimit OBJECT-TYPE
SYNTAX Integer32 (0..80000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configures interface Rate Limit (Packet that can be transferred
on a port at a particular second).
This object's value will take effect on the interface speed. Based
on the operating speed of the port, the rate limit will be applied.
This value can also be affected by the metering. A value of zero(0)
disable rate limiting i.e. sets the port to full speed."
::= { snMspsConfigAclRateCtrlEntry 5 }
snMspsConfigAclRateCtrlPortBurstSize OBJECT-TYPE
SYNTAX Integer32 (0..80000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configures interface Burst Pkt Rate. (Packet Burst that can be
transferred on a port at a particular second)
This object's value will take effect on the interface speed. Based
on the operating speed of the port, the burst size of the port
will be applied. This value can also be affected by the metering. A
value of zero(0) disable burst rate limiting i.e. sets the port burst
rate limit to full speed."
::= { snMspsConfigAclRateCtrlEntry 6 }
-- Port Control Table
snMspsConfigPortCtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsConfigPortCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to control the port specific parameters of the device like speed,
duplex mode, etc."
::= { snMspsConfig 5 }
snMspsConfigPortCtrlEntry OBJECT-TYPE
SYNTAX SnMspsConfigPortCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry appears in this table for each interface in the system.
Index to the table is the interface index of the port."
INDEX { snMspsConfigPortCtrlIndex }
::= { snMspsConfigPortCtrlTable 1 }
SnMspsConfigPortCtrlEntry ::=
SEQUENCE {
snMspsConfigPortCtrlIndex
Integer32,
snMspsConfigPortCtrlMode
INTEGER,
snMspsConfigPortCtrlDuplex
INTEGER,
snMspsConfigPortCtrlSpeed
INTEGER,
snMspsConfigPortCtrlFlowControl
INTEGER,
snMspsConfigPortCtrlRenegotiate
INTEGER,
snMspsConfigPortCtrlMaxMacAddr
Integer32,
snMspsConfigPortCtrlMaxMacAction
INTEGER,
snMspsConfigPortHOLBlockPrevention
INTEGER
}
snMspsConfigPortCtrlIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Interface index of the port for which the configuration
in this entry applies."
::= { snMspsConfigPortCtrlEntry 1 }
snMspsConfigPortCtrlMode OBJECT-TYPE
SYNTAX INTEGER {
auto (1),
noNegotiation (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Speficies the mode in which the speed, duplex modes and flow control
of the interface is determined.
If set as 'auto', the hardware senses speed and negotiates with the port
on the other end of the link for data transfer operation as
'full-duplex' or 'half-duplex' and about flow contol.
If set as 'nonegotiation', the configured values for interface
speed, duplex mode and flow control will be effective."
DEFVAL { auto }
::= { snMspsConfigPortCtrlEntry 2 }
snMspsConfigPortCtrlDuplex OBJECT-TYPE
SYNTAX INTEGER {
full (1),
half (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configures interface data transfer mode as full-duplex or half-duplex.
This object can be configured only if the 'PortCtrlMode' is 'nonegotiation'.
If the 'PortCtrlMode' is 'auto', it obtains the value from Hardware
after negotiating with its peer"
::= { snMspsConfigPortCtrlEntry 3 }
snMspsConfigPortCtrlSpeed OBJECT-TYPE
SYNTAX INTEGER {
tenMBPS (1),
hundredMBPS (2),
oneGB (3),
tenGB (4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configures interface speed.
This object can be configured only if the 'PortCtrlMode' is 'nonegotiation'.
If the 'PortCtrlMode' is 'auto', it obtains the value from Hardware
after negotiating with its peer"
::= { snMspsConfigPortCtrlEntry 4 }
snMspsConfigPortCtrlFlowControl OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables / disables flow control for the interface.
This object be configured only if the 'PortCtrlMode' is 'nonegotiation'.
If the 'PortCtrlMode' is 'auto', it obtains the value from Hardware
after negotiating with its peer"
::= { snMspsConfigPortCtrlEntry 5 }
snMspsConfigPortCtrlRenegotiate OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When configured as 'true', restarts autonegotiation on the interface.
Once autonegotiation is restarted, the value of this object reverts
to 'false'."
DEFVAL { false }
::= { snMspsConfigPortCtrlEntry 6 }
snMspsConfigPortCtrlMaxMacAddr OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the maximum number of new MAC addresses that can be
learnt over the interface."
::= { snMspsConfigPortCtrlEntry 7 }
snMspsConfigPortCtrlMaxMacAction OBJECT-TYPE
SYNTAX INTEGER {
drop (1),
purgeLRU (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the action to be taken when the maximum number of new MAC
addresses that can be learnt over the interface is exceeded.
If the action is 'drop', the packet with new mac address will be
dropped once the maximum number of new MAC addresses that can be
learnt over the interface is exceeded.
If the action is 'purgeLRU', the 'Least Recently Used' mac address
will be deleted from the MAC table and the new mac address will be
added."
::= { snMspsConfigPortCtrlEntry 8 }
snMspsConfigPortHOLBlockPrevention OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
enabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables Head-Of-Line Blocking prevention on a port."
DEFVAL { enabled }
::= { snMspsConfigPortCtrlEntry 9 }
-- Mirror Group ------------------------------------------------------
snMspsConfigMirror OBJECT IDENTIFIER ::= { snMspsConfig 6 }
snMspsConfigMirrorStatus OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
enabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to enable/disable mirroring
feature in hardware.
When set to 'disabled (1)', all mirroring configurations will be
removed from hardware.
When set to 'enabled (2)', all mirroring configurations
present in software will be programmed in hardware."
DEFVAL { disabled }
::= { snMspsConfigMirror 1 }
snMspsConfigMirrorToPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the port to which the active mirrored traffic controlled
by snMspsConfigMirrorCtrlTable is to be copied."
::= { snMspsConfigMirror 2 }
-- Mirror Control Table
snMspsConfigMirrorCtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsConfigMirrorCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to control mirroring features for each interface
in the switch.
Parameters in this table are valid only when the
'snMspsConfigMirrorStatus' for the switch is not 'disabled'."
::= { snMspsConfigMirror 3 }
snMspsConfigMirrorCtrlEntry OBJECT-TYPE
SYNTAX SnMspsConfigMirrorCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry appears in this table for each interface
in the system."
INDEX { snMspsConfigMirrorCtrlIndex }
::= { snMspsConfigMirrorCtrlTable 1 }
SnMspsConfigMirrorCtrlEntry ::=
SEQUENCE {
snMspsConfigMirrorCtrlIndex
Integer32,
snMspsConfigMirrorCtrlIngressMirroring
INTEGER,
snMspsConfigMirrorCtrlEgressMirroring
INTEGER,
snMspsConfigMirrorCtrlStatus
INTEGER
}
snMspsConfigMirrorCtrlIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The interface index of the port for which the configuration
in this entry applies."
::= { snMspsConfigMirrorCtrlEntry 1 }
snMspsConfigMirrorCtrlIngressMirroring OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Provides control to enable or disable mirroring of ingress
traffic over this interface to the mirrored-to port."
DEFVAL { disabled }
::= { snMspsConfigMirrorCtrlEntry 2 }
snMspsConfigMirrorCtrlEgressMirroring OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Provides control to enable or disable mirroring of egress
traffic over this interface to the mirrored-to port."
DEFVAL { disabled }
::= { snMspsConfigMirrorCtrlEntry 3 }
snMspsConfigMirrorCtrlStatus OBJECT-TYPE
SYNTAX INTEGER {
valid(1),
invalid(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the validity of the entry."
::= { snMspsConfigMirrorCtrlEntry 4 }
-- Mirror Control Extension Table
-- snMspsConfigMirror 4 Reserved for future extensions
-- snMspsConfigMirror 5 Reserved for future extensions
snMspsConfigMirrorCtrlExtnTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsConfigMirrorCtrlExtnEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This Table is used to configure advanced mirroring features like
- Port Based Mirroring:
- flow based mirroring
- vlan based mirroring
Following are the configuration details for Port based mirroring:
To configure source ports in a session
- snMspsConfigMirrorCtrlExtnMirrType - is set to portBased
- snMspsConfigMirrorCtrlExtnSrcTable - should be used to configure list
of source ports to be mirrored
in a session
- snMspsConfigMirrorCtrlExtnSrcId - represents the source port.
The port Id to be mirrored
should be given here.
- snMspsConfigMirrorCtrlExtnSrcCfg - this object is used to
add/remove a port in the
source port list
Example
To create a session 1 with source ports 5,6 following
sequence of configuration should be followed
For table snMspsConfigMirrorCtrlExtnTable
snMspsConfigMirrorCtrlExtnSessionIndex = 1 as index
snMspsConfigMirrorCtrlExtnMirrType = portBased
For table snMspsConfigMirrorCtrlExtnSrcTable
snMspsConfigMirrorCtrlExtnSessionIndex = 1 as index
snMspsConfigMirrorCtrlExtnSrcId = 5 as index
snMspsConfigMirrorCtrlExtnSrcCfg = add
snMspsConfigMirrorCtrlExtnSessionIndex = 1 as index
snMspsConfigMirrorCtrlExtnSrcId = 6 as index
snMspsConfigMirrorCtrlExtnSrcCfg = add
To configure destination ports in a session
- snMspsConfigMirrorCtrlExtnDestinationTable - should be used to
configure list of
destination ports to be
mirrored in a session
- snMspsConfigMirrorCtrlExtnDestination - represents the
destination port. The
port Id to which packets
should be mirrored should
be given here.
- snMspsConfigMirrorCtrlExtnDestCfg - this object is used to
add/remove a port in the
source port list.
Example
To create a session 1 with destination port 10,11 following
sequence of configuration should be followed
For table snMspsConfigMirrorCtrlExtnTable
snMspsConfigMirrorCtrlExtnSessionIndex = 1 as index
snMspsConfigMirrorCtrlExtnMirrType = portBased
For table snMspsConfigMirrorCtrlExtnDestinationTable
snMspsConfigMirrorCtrlExtnSessionIndex = 1 as index
snMspsConfigMirrorCtrlExtnDestination = 10 as index
snMspsConfigMirrorCtrlExtnDestCfg = add
snMspsConfigMirrorCtrlExtnSessionIndex = 1 as index
snMspsConfigMirrorCtrlExtnDestination = 11 as index
snMspsConfigMirrorCtrlExtnDestCfg = add
To Activate a session
- snMspsConfigMirrorCtrlExtnStatus - should be used to
activate/deactivate mirroring for a
session
Example
To enable mirroring for a session following sequence of
configuration should be followed
For table snMspsConfigMirrorCtrlExtnTable
snMspsConfigMirrorCtrlExtnSessionIndex = 1 as index
snMspsConfigMirrorCtrlExtnStatus = active
Above configurations applies to flow based mirroring also, the
snMspsConfigMirrorCtrlExtnSrcId used above for configuratin ports
should be used to configure flow Id
To enable remote monitoring of sources for a session
- snMspsConfigMirrorCtrlExtnRSpanStatus - should be used to
enable/disable remote
monitoring for a session
it can be used to set a
session as source rspan
session which implies source
entities for this session are
monitored remotely or can be
used to set a session
as destination rspan session
which implies that mirrored
data is received for this
session should be forwarded to
destination entities of this
session
- snMspsConfigMirrorCtrlExtnRSpanVlanId - it is the vlan id which is
reserved in the network to
carry Mirrored data,if the
session is configured as
source rspan session then data
mirrored for the source
entities will be forwarded on
this vlan if the session is
configured as destination
rspan session then data
received on this vlan will be
forwarded to the destination
entities of this session
Following are the configuration details for configurating Vlan
based mirroring:
To configure vlans as source for a session
- snMspsConfigMirrorCtrlExtnMirrType - is set to vlanBased
- snMspsConfigMirrorCtrlExtnSrcVlanTable - should be used to configure
list of source vlans to be
mirrored in a session
- snMspsConfigMirrorCtrlExtnSrcVlanId - represents a source vlan. The
vlan to be mirrored should be
given here.
- snMspsConfigMirrorCtrlExtnSrcVlanCfg - this object is used to
add/remove a vlan in the
source vlan list
Example
To create a session 1 with source list as vlan 5,6
belonging to context 1 following sequence of configuration
should be followed
For table snMspsConfigMirrorCtrlExtnTable
snMspsConfigMirrorCtrlExtnSessionIndex = 1 as index
snMspsConfigMirrorCtrlExtnMirrType = vlanBased
For table snMspsConfigMirrorCtrlExtnSrcVlanTable
snMspsConfigMirrorCtrlExtnSrcVlanContext = 1 as index
snMspsConfigMirrorCtrlExtnSessionIndex = 1 as index
snMspsConfigMirrorCtrlExtnSrcVlanId = 5 as index
snMspsConfigMirrorCtrlExtnSrcVlanCfg = add
snMspsConfigMirrorCtrlExtnSrcVlanContext = 1 as index
snMspsConfigMirrorCtrlExtnSessionIndex = 1 as index
snMspsConfigMirrorCtrlExtnSrcVlanId = 6 as index
snMspsConfigMirrorCtrlExtnSrcVlanCfg = add
Entries for this table can be configured only when snMspsConfigMirrorStatus
is set to enabled.
Configurations done through 'snMspsConfigMirrorCtrlTable' will change the
following for the first session on this table:
- Mirroring type will be changed to port-based
- Mode and Source entities will be overwritten
with the values configured through 'snMspsConfigMirrorCtrlTable'
- Destination entities will be overwritten
with the value configured through 'snMspsConfigMirrorToPort' object "
::= { snMspsConfigMirror 6 }
snMspsConfigMirrorCtrlExtnEntry OBJECT-TYPE
SYNTAX SnMspsConfigMirrorCtrlExtnEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry appears in this table for each session
in the system."
INDEX { snMspsConfigMirrorCtrlExtnSessionIndex}
::= { snMspsConfigMirrorCtrlExtnTable 1 }
SnMspsConfigMirrorCtrlExtnEntry ::=
SEQUENCE {
snMspsConfigMirrorCtrlExtnSessionIndex
Integer32,
snMspsConfigMirrorCtrlExtnMirrType
INTEGER,
snMspsConfigMirrorCtrlExtnRSpanStatus
INTEGER,
snMspsConfigMirrorCtrlExtnRSpanVlanId
Integer32,
snMspsConfigMirrorCtrlExtnRSpanContext
Integer32,
snMspsConfigMirrorCtrlExtnStatus
RowStatus,
snMspsConfigMirrorCtrlExtnHardwareIndex
Integer32
}
snMspsConfigMirrorCtrlExtnSessionIndex OBJECT-TYPE
SYNTAX Integer32 (1..20)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of the mirroring session for which the configuration
in this entry applies."
::= { snMspsConfigMirrorCtrlExtnEntry 1 }
snMspsConfigMirrorCtrlExtnMirrType OBJECT-TYPE
SYNTAX INTEGER{
portBased(1),
mac-flowBased(2),
vlanBased(3),
invalid(4),
ip-flowBased(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object tells the type of mirroring this session supports.
This object needs to be set before doing any configuration for
a mirroring session"
DEFVAL { invalid }
::= { snMspsConfigMirrorCtrlExtnEntry 2 }
snMspsConfigMirrorCtrlExtnRSpanStatus OBJECT-TYPE
SYNTAX INTEGER{
sourceRSpanVlan(1),
destinationRSpanVlan(2),
disabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates session is enabled or disabled for
Remote monitoring.
If set as 'source-rspan-vlanid' indicates that the session is
enabled for Remote monitoring and the source entities for this
session will be remotely monitored.
If set as 'destination-rspan-vlanid' indicates that the session
should monitor remote traffic mirrored with RSPAN VLAN ID tag.
RSPAN VLAN ID should be configured through object
'snMspsConfigMirrorCtrlExtnRSpanVlanId'.
If set as 'disabled' Remote monitoring is disabled for this
mirroring session."
DEFVAL { disabled }
::= { snMspsConfigMirrorCtrlExtnEntry 3 }
snMspsConfigMirrorCtrlExtnRSpanVlanId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Vlan Id used for Remote monitoring for this session.
If snMspsConfigMirrorCtrlExtnRSpanStatus is set to disabled, then
this object will have an invalid value (zero)"
DEFVAL { 0 }
::= { snMspsConfigMirrorCtrlExtnEntry 4 }
snMspsConfigMirrorCtrlExtnRSpanContext OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the Context Id to which the RSpan Vlan belongs.
Value '0' mean this object is not considered for this
mirroring session."
DEFVAL { 0 }
::= { snMspsConfigMirrorCtrlExtnEntry 5 }
snMspsConfigMirrorCtrlExtnStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of the entry. The entry can be
made active only if snMspsConfigMirrorCtrlExtnMirrType is configured and
source and destination entries for this sesion is also configured"
::= { snMspsConfigMirrorCtrlExtnEntry 6 }
snMspsConfigMirrorCtrlExtnHardwareIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the Hardware Index associated with this mirroring session.
Value '0' mean this object is not applicable for this
mirroring session."
::= { snMspsConfigMirrorCtrlExtnEntry 7 }
snMspsConfigMirrorCtrlExtnSrcTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsConfigMirrorCtrlExtnSrcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to configure list of source entities for mirroring sessions"
::= { snMspsConfigMirror 7 }
snMspsConfigMirrorCtrlExtnSrcEntry OBJECT-TYPE
SYNTAX SnMspsConfigMirrorCtrlExtnSrcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry appears in this table for each mirroring session."
INDEX { snMspsConfigMirrorCtrlExtnSessionIndex, snMspsConfigMirrorCtrlExtnSrcId }
::= { snMspsConfigMirrorCtrlExtnSrcTable 1 }
SnMspsConfigMirrorCtrlExtnSrcEntry ::=
SEQUENCE {
snMspsConfigMirrorCtrlExtnSrcId
Integer32,
snMspsConfigMirrorCtrlExtnSrcCfg
INTEGER,
snMspsConfigMirrorCtrlExtnSrcMode
INTEGER
}
snMspsConfigMirrorCtrlExtnSrcId OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies the source id which participates in a mirroring session.
For Port based mirroring this object can be port IfIndex.
To mirror Tunnel and Trunk ports the same Id can be used for
specifying Tunnel/Trunk Id.
For Flow based mirroring this object can be Acl Ids."
::= { snMspsConfigMirrorCtrlExtnSrcEntry 1 }
snMspsConfigMirrorCtrlExtnSrcCfg OBJECT-TYPE
SYNTAX INTEGER{
add(1),
delete(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to create/delete a source entry for a session."
::= { snMspsConfigMirrorCtrlExtnSrcEntry 2 }
snMspsConfigMirrorCtrlExtnSrcMode OBJECT-TYPE
SYNTAX INTEGER {
ingress(1),
egress(2),
both(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Provides control to set the mode of mirroring.
It can be ingerss,Egress or Both."
DEFVAL { both }
::= { snMspsConfigMirrorCtrlExtnSrcEntry 3 }
snMspsConfigMirrorCtrlExtnSrcVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsConfigMirrorCtrlExtnSrcVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to configure list of vlan source entities for mirroring sessions"
::= { snMspsConfigMirror 8 }
snMspsConfigMirrorCtrlExtnSrcVlanEntry OBJECT-TYPE
SYNTAX SnMspsConfigMirrorCtrlExtnSrcVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry appears in this table for each mirroring session."
INDEX { snMspsConfigMirrorCtrlExtnSessionIndex, snMspsConfigMirrorCtrlExtnSrcVlanContext, snMspsConfigMirrorCtrlExtnSrcVlanId }
::= { snMspsConfigMirrorCtrlExtnSrcVlanTable 1 }
SnMspsConfigMirrorCtrlExtnSrcVlanEntry ::=
SEQUENCE {
snMspsConfigMirrorCtrlExtnSrcVlanContext
Integer32,
snMspsConfigMirrorCtrlExtnSrcVlanId
Integer32,
snMspsConfigMirrorCtrlExtnSrcVlanCfg
INTEGER,
snMspsConfigMirrorCtrlExtnSrcVlanMode
INTEGER
}
snMspsConfigMirrorCtrlExtnSrcVlanContext OBJECT-TYPE
SYNTAX Integer32 (1..64)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies the Context Id to which the source entity belongs, this
is used in case of specifying vlan as source.
Value '-1' mean this object is not considered for this mirroring
session."
::= { snMspsConfigMirrorCtrlExtnSrcVlanEntry 1 }
snMspsConfigMirrorCtrlExtnSrcVlanId OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies the Vlan id which participates in a mirroring session."
::= { snMspsConfigMirrorCtrlExtnSrcVlanEntry 2 }
snMspsConfigMirrorCtrlExtnSrcVlanCfg OBJECT-TYPE
SYNTAX INTEGER{
add(1),
delete(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to create/delete a vlan entry for a session."
::= { snMspsConfigMirrorCtrlExtnSrcVlanEntry 3 }
snMspsConfigMirrorCtrlExtnSrcVlanMode OBJECT-TYPE
SYNTAX INTEGER {
ingress(1),
egress(2),
both(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Provides control to set the mode of mirroring.
It can be ingerss,Egress or Both."
DEFVAL { both }
::= { snMspsConfigMirrorCtrlExtnSrcVlanEntry 4 }
snMspsConfigMirrorCtrlExtnDestinationTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsConfigMirrorCtrlExtnDestinationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to configure list of destination entities"
::= { snMspsConfigMirror 9 }
snMspsConfigMirrorCtrlExtnDestinationEntry OBJECT-TYPE
SYNTAX SnMspsConfigMirrorCtrlExtnDestinationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry appears in this table for each destination entity
in a mirroring session."
INDEX { snMspsConfigMirrorCtrlExtnSessionIndex, snMspsConfigMirrorCtrlExtnDestination }
::= { snMspsConfigMirrorCtrlExtnDestinationTable 1 }
SnMspsConfigMirrorCtrlExtnDestinationEntry ::=
SEQUENCE {
snMspsConfigMirrorCtrlExtnDestination
Integer32,
snMspsConfigMirrorCtrlExtnDestCfg
INTEGER
}
snMspsConfigMirrorCtrlExtnDestination OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies the destination port id which participates in a mirroring
session."
::= { snMspsConfigMirrorCtrlExtnDestinationEntry 1 }
snMspsConfigMirrorCtrlExtnDestCfg OBJECT-TYPE
SYNTAX INTEGER{
add (1),
delete (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to create/delete a destination entry for a session."
::= { snMspsConfigMirrorCtrlExtnDestinationEntry 2 }
-- Network Group --------------------------------------------------
snMspsConfigNetwork OBJECT IDENTIFIER ::= { snMspsConfig 7 }
snMspsConfigL2FilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsConfigL2FilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to configure L2 filter rules in the system."
::= { snMspsConfigNetwork 1 }
snMspsConfigL2FilterEntry OBJECT-TYPE
SYNTAX SnMspsConfigL2FilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table is a L2 filter rule.
Index to the table is the L2 filter number."
INDEX { snMspsConfigL2FilterNo}
::= { snMspsConfigL2FilterTable 1 }
SnMspsConfigL2FilterEntry ::=
SEQUENCE {
snMspsConfigL2FilterNo
Integer32,
snMspsConfigL2FilterPriority
Integer32,
snMspsConfigL2FilterEtherType
Integer32,
snMspsConfigL2FilterProtocolType
Unsigned32,
snMspsConfigL2FilterDstMacAddr
MacAddress,
snMspsConfigL2FilterSrcMacAddr
MacAddress,
snMspsConfigL2FilterVlanId
Integer32,
snMspsConfigL2FilterInPortList
PortList,
snMspsConfigL2FilterAction
INTEGER,
snMspsConfigL2FilterMatchCount
Counter32,
snMspsConfigL2FilterStatus
RowStatus,
snMspsConfigL2FilterOutPortList
PortList,
snMspsConfigL2FilterDirection
INTEGER
}
snMspsConfigL2FilterNo OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"L2 Filter rule number."
::= { snMspsConfigL2FilterEntry 1 }
snMspsConfigL2FilterPriority OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The priority of the L2 filter can be used to decide which filter rule
is applicable when
--> the packet matches with more than one filter rules
--> All the filter rules result in 'allow'ing the packet
Higher value of 'filter priority' implies a higher priority.
Usage of 'L2FilterPriority' is implementation dependant."
DEFVAL { 1 }
::= { snMspsConfigL2FilterEntry 2 }
snMspsConfigL2FilterEtherType OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value in the Type/Len field of a frame that will
be matched to trigger this filter. The default value of
this object is '0'. When this object is SET with the default
value, frames are not matched for the value in the Type/Len
field with the value set for this object."
DEFVAL { 0 }
::= { snMspsConfigL2FilterEntry 3 }
snMspsConfigL2FilterProtocolType OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the non IP protocol type to be filtered.
aarp | amber | dec-spanning | decnet-iv |
diagnostic | dsm |etype-6000 | etype-8042 |
lat | lavc-sca | mop-console | mop-dump |
msdos | mumps | netbios | vines-echo |
vines-ip | xns-idp: A non-IP protocol.
A value of '0' means, the filter is applicable for all protocols."
DEFVAL { 0 }
::= { snMspsConfigL2FilterEntry 4 }
snMspsConfigL2FilterDstMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Destination MAC address to be matched with the packet. By Default, the
Destination Mac Address will be zero which means dont care condition ie)
any Dst Mac Address ."
::= { snMspsConfigL2FilterEntry 5 }
snMspsConfigL2FilterSrcMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Source MAC address to be matched with the packet. By Default, the Source
Mac Address will be zero which means dont care condition ie) any Src Mac
address"
::= { snMspsConfigL2FilterEntry 6 }
snMspsConfigL2FilterVlanId OBJECT-TYPE
SYNTAX Integer32 (0..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Vlan Id to be filtered. In case of Provider bridges, This Vlan Id will
be treated as customer Vlan Id.
A value of '0' means, this object is unused. Configuring this value is not
allowed."
DEFVAL { 0 }
::= { snMspsConfigL2FilterEntry 7 }
snMspsConfigL2FilterInPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the complete set of ports over which this filter is applied
for packets ingress at ports in this list.
If the In port list is '0', the filter rule is applicable for the
incoming packets on all ports.
Even though the snMspsConfigL2FilterInPortList is configured, It is applicable only
if snMspsConfigL2FilterDirection is configured as 'in'.
By default inport list is maintained as '0'."
::= { snMspsConfigL2FilterEntry 8 }
snMspsConfigL2FilterAction OBJECT-TYPE
SYNTAX INTEGER {
allow (1),
drop (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the action to be taken on the packet if the filter
rule matches.
If the action is 'allow', the packet will be forwarded according
to the forwarding rules.
If the action is 'drop', the packet will be discarded."
DEFVAL { allow }
::= { snMspsConfigL2FilterEntry 9 }
snMspsConfigL2FilterMatchCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of times this filter is matched."
::= { snMspsConfigL2FilterEntry 10 }
snMspsConfigL2FilterStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in this table is not used when this
object is SET 'notInService'. An entry created in this table is
be deleted when this object is SET 'destroy'."
::= { snMspsConfigL2FilterEntry 11 }
snMspsConfigL2FilterOutPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the complete set of ports over which this filter is applied
for packets egress at Ports in this list.
If the Out port list is '0', the filter rule is applicable for the
outgoing packets on all ports.
Even though the snMspsConfigL2FilterOutPortList is configured, It is applicable only
if snMspsConfigL2FilterDirection is configured as 'out'.
By default outport list is maintained as '0'."
::= { snMspsConfigL2FilterEntry 12 }
snMspsConfigL2FilterDirection OBJECT-TYPE
SYNTAX INTEGER {
in (1),
out (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the direction of this filter to be applied. By Default the
filter will be applied on ingress direction.
When the direction of this filter is 'in', It is applied on specified
ports of the snMspsConfigL2FilterInPortList.
When the direction of this filter is 'out', It is applied on specified
ports of the snMspsConfigL2FilterOutPortList."
DEFVAL { in }
::= { snMspsConfigL2FilterEntry 13 }
-- Layer 4 Switching
snMspsConfigL4SwitchingFilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsConfigL4SwitchingFilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" A table to L4 Switching rules in the system.
"
::= { snMspsConfigNetwork 2 }
snMspsConfigL4SwitchingFilterEntry OBJECT-TYPE
SYNTAX SnMspsConfigL4SwitchingFilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Each entry in this table is a L4 Switching rule.
Index to the table is L4 filter number. "
INDEX { snMspsConfigL4SwitchingFilterNo}
::= { snMspsConfigL4SwitchingFilterTable 1 }
SnMspsConfigL4SwitchingFilterEntry ::=
SEQUENCE {
snMspsConfigL4SwitchingFilterNo
Integer32,
snMspsConfigL4SwitchingProtocol
Integer32,
snMspsConfigL4SwitchingPortNo
Unsigned32,
snMspsConfigL4SwitchingCopyToPort
Integer32,
snMspsConfigL4SwitchingFilterStatus
RowStatus
}
snMspsConfigL4SwitchingFilterNo OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"L4 Switching Filter rule number."
::= { snMspsConfigL4SwitchingFilterEntry 1 }
snMspsConfigL4SwitchingProtocol OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of protocol to be checked against the packet. The
default value is 255. If the value is 255, it means that the
protocol type can be anything and it will not be checked to
decide the action. "
DEFVAL { 255 }
::= { snMspsConfigL4SwitchingFilterEntry 2 }
snMspsConfigL4SwitchingPortNo OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Layer 4 port no. Please note
these ports are the TCP / UDP ports."
DEFVAL { 0 }
::= { snMspsConfigL4SwitchingFilterEntry 3 }
snMspsConfigL4SwitchingCopyToPort OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is Port to which the packet would be switched"
::= { snMspsConfigL4SwitchingFilterEntry 4 }
snMspsConfigL4SwitchingFilterStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry."
::= { snMspsConfigL4SwitchingFilterEntry 5 }
-- ------------------------------------------------------------------
-- IP Authorized Manager
snMspsConfigIpAuthMgrTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsConfigIpAuthMgrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to configure IP authorized managers in the system."
::= { snMspsConfigNetwork 3 }
snMspsConfigIpAuthMgrEntry OBJECT-TYPE
SYNTAX SnMspsConfigIpAuthMgrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IP Authorized managers, which restricts configuration from specific
workstations only, provides additional security. Each entry in this
table represents rules for particular IP authorized manager."
INDEX { snMspsConfigIpAuthMgrIpAddr, snMspsConfigIpAuthMgrIpMask }
::= { snMspsConfigIpAuthMgrTable 1 }
SnMspsConfigIpAuthMgrEntry ::=
SEQUENCE {
snMspsConfigIpAuthMgrIpAddr
IpAddress,
snMspsConfigIpAuthMgrIpMask
IpAddress,
snMspsConfigIpAuthMgrPortList
PortList,
snMspsConfigIpAuthMgrVlanList
OCTET STRING,
snMspsConfigIpAuthMgrOOBPort
TruthValue,
snMspsConfigIpAuthMgrAllowedServices
Integer32,
snMspsConfigIpAuthMgrRowStatus
RowStatus,
snMspsConfigIpAuthMgrCreationOrder
Integer32
}
snMspsConfigIpAuthMgrIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies either the Network or Host address from which the switch
can be managed.
An address 0.0.0.0 indicates 'Any Manager'."
::= { snMspsConfigIpAuthMgrEntry 1 }
snMspsConfigIpAuthMgrIpMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies the IP address mask to be applied on snMspsConfigIpAuthMgrIpAddr.
Value 0.0.0.0 indicates mask for 'Any Manager'."
::= { snMspsConfigIpAuthMgrEntry 2 }
snMspsConfigIpAuthMgrPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the port numbers through which the authorized manager can
access the switch.
By default the authorized manager is allowed to access the switch
through all the ports.
If a set of ports are configured in the 'PortList', the manager can
access the switch only through the configured ports."
::= { snMspsConfigIpAuthMgrEntry 3 }
snMspsConfigIpAuthMgrVlanList OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the Vlan's in which the IP authorized manager can reside.
By default the manager is allowed to reside in any vlan.
If a set of vlans are configured in the 'VlanList', the manager can
reside only in the configured vlan set. Access to the switch
will be denied from any other vlan."
::= { snMspsConfigIpAuthMgrEntry 4 }
snMspsConfigIpAuthMgrOOBPort OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies whether the authorized manager can access the switch
through OOB Port
By default the manager is denied access to reside on OOB Interface"
DEFVAL { false }
::= { snMspsConfigIpAuthMgrEntry 5 }
snMspsConfigIpAuthMgrAllowedServices OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the allowed services through which the authorized manager can
access the switch.
This object takes bit mask values. The services represented by each bit
position is as given below:
With bit 0 being the Least Significant Bit,
Bit0 --> snmp
Bit1 --> telnet
Bit2 --> http
Bit3 --> https
Bit4 --> ssh
If the particular bit is set to 1,corresponding service is allowed for
the configured manager.
By default all services are allowed for the configured manager."
DEFVAL { '1F'h }
::= { snMspsConfigIpAuthMgrEntry 6 }
snMspsConfigIpAuthMgrRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry."
::= { snMspsConfigIpAuthMgrEntry 7 }
snMspsConfigIpAuthMgrCreationOrder OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies creation order of the rules"
::= { snMspsConfigIpAuthMgrEntry 8 }
snMspsConfigIpAuthMgrEnabled OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable/Disable Ip Authorized Manager."
DEFVAL {disabled}
::= { snMspsConfigNetwork 4 }
snMspsConfigResetTopologyChgCounter OBJECT-TYPE
SYNTAX INTEGER {
no-operation(1),
reset(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Reset topology change counters for RSTP and MSTP depending on the stack running."
::= { snMspsConfigNetwork 5 }
-- snMspsConfigNetwork 6-9 reserved for future extensions
-- ------------------------------------------------------------------
-- Ipvx Authorized Manager
snMspsConfigIpvxAuthMgrTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsConfigIpvxAuthMgrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to configure Ipvx(ipv4 and ipv6) authorized managers in the system."
::= { snMspsConfigNetwork 10 }
snMspsConfigIpvxAuthMgrEntry OBJECT-TYPE
SYNTAX SnMspsConfigIpvxAuthMgrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Ipvx Authorized managers, which restricts configuration from specific
workstations only, provides additional security. Each entry in this
table represents rules for particular Ipvx authorized manager."
INDEX { snMspsConfigIpvxAuthMgrAddrType, snMspsConfigIpvxAuthMgrAddr, snMspsConfigIpvxAuthMgrAddrLen }
::= { snMspsConfigIpvxAuthMgrTable 1 }
SnMspsConfigIpvxAuthMgrEntry ::=
SEQUENCE {
snMspsConfigIpvxAuthMgrAddrType
InetAddressType,
snMspsConfigIpvxAuthMgrAddr
InetAddress,
snMspsConfigIpvxAuthMgrAddrLen
InetAddressPrefixLength,
snMspsConfigIpvxAuthMgrPortList
PortList,
snMspsConfigIpvxAuthMgrVlanList
OCTET STRING,
snMspsConfigIpvxAuthMgrOOBPort
TruthValue,
snMspsConfigIpvxAuthMgrAllowedServices
Integer32,
snMspsConfigIpvxAuthMgrCreationOrder
Integer32,
snMspsConfigIpvxAuthMgrRowStatus
RowStatus
}
snMspsConfigIpvxAuthMgrAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address type of SnMspsConfigIpvxAuthMgrEntry.
This value determines the type for
snMspsConfigIpvxAuthMgrAddr and snMspsConfigIpvxAuthMgrAddrLen.
ipv4(1) and ipv6(2) are the only two values supported
in this MIB module."
::= { snMspsConfigIpvxAuthMgrEntry 1 }
snMspsConfigIpvxAuthMgrAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies either the Network or Host address from which the switch
can be managed.
An address 0.0.0.0 or :: indicates 'Any Manager'."
::= { snMspsConfigIpvxAuthMgrEntry 2 }
snMspsConfigIpvxAuthMgrAddrLen OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the number of leading one bits that form the
mask to be logical-ANDed with the snMspsConfigIpvxAuthMgrAddr
before being compared to the value in the
snMspsConfigIpvxAuthMgrAddr field.
The values for the index objects snMspsConfigIpvxAuthMgrAddr and
snMspsConfigIpvxAuthMgrAddrLen must be consistent.
Value 0 indicates mask for 'Any Manager'."
::= { snMspsConfigIpvxAuthMgrEntry 3 }
snMspsConfigIpvxAuthMgrPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the port numbers through which the authorized manager can
access the switch.
By default the authorized manager is allowed to access the switch
through all the ports.
If a set of ports are configured in the 'PortList', the manager can
access the switch only through the configured ports."
::= { snMspsConfigIpvxAuthMgrEntry 4 }
snMspsConfigIpvxAuthMgrVlanList OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the Vlan's in which the IP authorized manager can reside.
By default the manager is allowed to reside in any vlan.
If a set of vlans are configured in the 'VlanList', the manager can
reside only in the configured vlan set. Access to the switch
will be denied from any other vlan."
::= { snMspsConfigIpvxAuthMgrEntry 5 }
snMspsConfigIpvxAuthMgrOOBPort OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies whether the authorized manager can access the switch
through OOB Port
By default the manager is denied access to reside on OOB Interface"
DEFVAL { false }
::= { snMspsConfigIpvxAuthMgrEntry 6 }
snMspsConfigIpvxAuthMgrAllowedServices OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the allowed services through which the authorized manager can
access the switch.
This object takes bit mask values. The services represented by each bit
position is as given below:
With bit 0 being the Least Significant Bit,
Bit0 --> snmp
Bit1 --> telnet
Bit2 --> http
Bit3 --> https
Bit4 --> ssh
If the particular bit is set to 1,corresponding service is allowed for
the configured manager.
By default all services are allowed for the configured manager."
DEFVAL { '1F'h }
::= { snMspsConfigIpvxAuthMgrEntry 7 }
snMspsConfigIpvxAuthMgrCreationOrder OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies creation order of the rules"
::= { snMspsConfigIpvxAuthMgrEntry 8 }
snMspsConfigIpvxAuthMgrRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry."
::= { snMspsConfigIpvxAuthMgrEntry 9 }
-- ------------------------------------------------------------------
snMspsConfigIpVlanId OBJECT-TYPE
SYNTAX INTEGER (0..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Inband ports VLAN ID (VID) from 1 to 4094 or 0 if
the VID is unassigned for the agent."
DEFVAL {0}
::= { snMspsConfig 8 }
snMspsConfigAgentReceiveOnAllKnownVLANs OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Setting AgentReceiveOnAllKnownVLANs to Enable(1)
enables the reception of IP traffic for the agent on all VLANs.
This means the agent accepts incoming connections on all the VLANs.
For outgoing traffic like sending SNMP traps and
connection to the e-mail server the Agent VLAN is used."
::= { snMspsConfig 9 }
snMspsConfigVlan0Aware OBJECT-TYPE
SYNTAX INTEGER (0..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The VLAN ID of VLAN which is to be in transparent mode. Zero (0) indicates that no VLAN is in transparent mode."
DEFVAL {0}
::= { snMspsConfig 10}
--snMspsConfig 11 reserved for future extensions
-- Port Control Configuration Table
snMspsConfigPortCtrlConfigurationTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsConfigPortCtrlConfigurationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to control the port specific parameters of the device like speed,
duplex mode, etc."
::= { snMspsConfig 12 }
snMspsConfigPortCtrlConfigurationEntry OBJECT-TYPE
SYNTAX SnMspsConfigPortCtrlConfigurationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry appears in this table for each interface in the system.
Index to the table is the interface index of the port."
INDEX { snMspsConfigPortCtrlConfigurationIndex }
::= { snMspsConfigPortCtrlConfigurationTable 1 }
SnMspsConfigPortCtrlConfigurationEntry ::=
SEQUENCE {
snMspsConfigPortCtrlConfigurationIndex
Integer32,
snMspsConfigPortCtrlConfigurationMode
INTEGER,
snMspsConfigPortCtrlConfigurationDuplex
INTEGER,
snMspsConfigPortCtrlConfigurationSpeed
INTEGER,
snMspsConfigPortCtrlConfigurationFlowControl
INTEGER,
snMspsConfigPortCtrlConfigurationRenegotiate
INTEGER,
snMspsConfigPortCtrlConfigurationMaxMacAddr
Integer32,
snMspsConfigPortCtrlConfigurationMaxMacAction
INTEGER,
snMspsConfigPortCtrlConfigurationHOLBlockPrevention
INTEGER
}
snMspsConfigPortCtrlConfigurationIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Interface index of the port for which the configuration
in this entry applies."
::= { snMspsConfigPortCtrlConfigurationEntry 1 }
snMspsConfigPortCtrlConfigurationMode OBJECT-TYPE
SYNTAX INTEGER {
auto (1),
noNegotiation (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Speficies the mode in which the speed, duplex modes and flow control
of the interface is determined.
If set as 'auto', the hardware senses speed and negotiates with the port
on the other end of the link for data transfer operation as
'full-duplex' or 'half-duplex' and about flow contol.
If set as 'nonegotiation', the configured values for interface
speed, duplex mode and flow control will be effective.
The current value of this MIB object represents only configuration state.
The real state of this port-specific parameter may be different ('see snMspsConfigPortCtrlMode')."
DEFVAL { auto }
::= { snMspsConfigPortCtrlConfigurationEntry 2 }
snMspsConfigPortCtrlConfigurationDuplex OBJECT-TYPE
SYNTAX INTEGER {
full (1),
half (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configures interface data transfer mode as full-duplex or half-duplex.
This object can be configured only if the 'PortCtrlMode' is 'nonegotiation'.
If the 'PortCtrlMode' is 'auto', it obtains the value from Hardware
after negotiating with its peer.
The current value of this MIB object represents only configuration state.
The real state of this port-specific parameter may be different ('see snMspsConfigPortCtrlDuplex')."
::= { snMspsConfigPortCtrlConfigurationEntry 3 }
snMspsConfigPortCtrlConfigurationSpeed OBJECT-TYPE
SYNTAX INTEGER {
tenMBPS (1),
hundredMBPS (2),
oneGB (3),
tenGB (4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configures interface speed.
This object can be configured only if the 'PortCtrlMode' is 'nonegotiation'.
If the 'PortCtrlMode' is 'auto', it obtains the value from Hardware
after negotiating with its peer.
The current value of this MIB object represents only configuration state.
The real state of this port-specific parameter may be different ('see snMspsConfigPortCtrlSpeed')."
::= { snMspsConfigPortCtrlConfigurationEntry 4 }
snMspsConfigPortCtrlConfigurationFlowControl OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables / disables flow control for the interface.
This object be configured only if the 'PortCtrlMode' is 'nonegotiation'.
If the 'PortCtrlMode' is 'auto', it obtains the value from Hardware
after negotiating with its peer.
The current value of this MIB object represents only configuration state.
The real state of this port-specific parameter may be different ('see snMspsConfigPortCtrlFlowControl')."
::= { snMspsConfigPortCtrlConfigurationEntry 5 }
snMspsConfigPortCtrlConfigurationRenegotiate OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When configured as 'true', restarts autonegotiation on the interface.
Once autonegotiation is restarted, the value of this object reverts
to 'false'.
The current value of this MIB object represents only configuration state.
The real state of this port-specific parameter may be different ('see snMspsConfigPortCtrlRenegotiate')."
DEFVAL { false }
::= { snMspsConfigPortCtrlConfigurationEntry 6 }
snMspsConfigPortCtrlConfigurationMaxMacAddr OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the maximum number of new MAC addresses that can be
learnt over the interface.
The current value of this MIB object represents only configuration state.
The real state of this port-specific parameter may be different ('see snMspsConfigPortCtrlMaxMacAddr')."
::= { snMspsConfigPortCtrlConfigurationEntry 7 }
snMspsConfigPortCtrlConfigurationMaxMacAction OBJECT-TYPE
SYNTAX INTEGER {
drop (1),
purgeLRU (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the action to be taken when the maximum number of new MAC
addresses that can be learnt over the interface is exceeded.
If the action is 'drop', the packet with new mac address will be
dropped once the maximum number of new MAC addresses that can be
learnt over the interface is exceeded.
If the action is 'purgeLRU', the 'Least Recently Used' mac address
will be deleted from the MAC table and the new mac address will be
added.
The current value of this MIB object represents only configuration state.
The real state of this port-specific parameter may be different ('see snMspsConfigPortCtrlMaxMacAction')."
::= { snMspsConfigPortCtrlConfigurationEntry 8 }
snMspsConfigPortCtrlConfigurationHOLBlockPrevention OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
enabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables Head-Of-Line Blocking prevention on a port.
The current value of this MIB object represents only configuration state.
The real state of this port-specific parameter may be different ('see snMspsConfigPortHOLBlockPrevention')."
DEFVAL { enabled }
::= { snMspsConfigPortCtrlConfigurationEntry 9 }
--snMspsConfig 13-14 reserved for future extensions
-- Rate Control Limit Group ---------------------------------------------
snMspsConfigRateCtrlLimitTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsConfigRateCtrlLimitEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to control the rate limiting parameters
either for the entire switch or for each physical and port-channel
interface in the switch."
::= { snMspsConfig 15 }
snMspsConfigRateCtrlLimitEntry OBJECT-TYPE
SYNTAX SnMspsConfigRateCtrlLimitEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry appears in this table for each physical and port-channel
interface in the switch."
INDEX { snMspsConfigRateCtrlLimitIndex }
::= { snMspsConfigRateCtrlLimitTable 1 }
SnMspsConfigRateCtrlLimitEntry ::=
SEQUENCE {
snMspsConfigRateCtrlLimitIndex
Integer32,
snMspsConfigRateCtrlLimitValue
Integer32
}
snMspsConfigRateCtrlLimitIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The interface index for which the configuration in this
entry applies."
::= { snMspsConfigRateCtrlLimitEntry 1 }
snMspsConfigRateCtrlLimitValue OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allows to configure the limiting value for the maximum number
of dlf, multicast and broadcast data that can be transmitted
per second over this interface. The unit of data is given by
snMspsConfigRateCtrlUnit object. Setting this object to the
value zero disables rate limiting for Destination lookup failure
packets on this interface. The value that can be set for this
object is limited by the underlying hardware"
DEFVAL {0}
::= { snMspsConfigRateCtrlLimitEntry 2 }
snMspsConfigRateCtrlUnit OBJECT-TYPE
SYNTAX INTEGER {
pps (1),
kbps (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Defines unit of rate limiting values in corresponding entry
from snMspsConfigRateCtrlTable. It can be treated
either in packet per second or kilobit per second."
::= { snMspsConfig 16 }
--snMspsConfig 17-19 reserved for future extensions
snMspsConfigSwitchAgingEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable/Disable auto-aging functionality of the learning table."
DEFVAL {enabled}
::= { snMspsConfig 20 }
snMspsConfigSwitchSnifferBarrierEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable/Disable Monitor Barrier functionality. If disabled the mirror destination
port is also part of the switching engine "
DEFVAL {enabled}
::= { snMspsConfig 25 }
--snMspsConfig 21-26 reserved for future extensions
snMspsConfigSwitchTime OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Show/Set -MM/DD/YYYY hh:mm:ss- date and time of the switch."
::= { snMspsConfig 27 }
snMspsConfigurationSaveMode OBJECT-TYPE
SYNTAX INTEGER {
trailmode(1),
autosave(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "When set to 'autosave(2)', all nonvolatile configuration parameters
are saved automaticly to flash after configuration changes. In 'trailmode (1)' save
must be triggered manually. Autosave mode may not be available on all devices.
In this case, 'wrong value' error will be returned, when trying to set 'autosave(2)'"
DEFVAL { trailmode }
::= { snMspsConfig 28 }
snMspsInitiateConfigSave OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When set as 'true' switch configurations save operation is
initiated.
As soon as the configuration save operation is completed, the value
of this object reverts back to 'false'.
All the configurations made via the three interfaces
viz.
-> commandline interface
-> Web Interface
-> SNMP interface
are saved either in 'Startup Configuration File' in the flash or
in the specified 'issConfigSaveFileName' in the flash or
in the chosen remote system, depending upon 'ConfigSaveOption'."
DEFVAL { false }
::= { snMspsConfig 29 }
snMspsConfigLastSynchronisationTime OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MM/DD/YYYY hh:mm:ss- This is the time when the system time is last synchronized.
It return zero length value if the system time is not yet synchronized."
::= { snMspsConfig 30 }
snMspsConfigChangesSaved OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value 'true' means there are no configuration changes that are not saved.
Otherwise it will have the value 'false'."
DEFVAL { true }
::= { snMspsConfig 31 }
snMspsConfigurationAutoRestartTimer OBJECT-TYPE
SYNTAX INTEGER (0|300..86400)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "When setting to time interval in seconds, device will perform restart
automatically after the time interval is expired.
Setting 0 will cancel any timer, which was previously set"
DEFVAL { 0 }
::= { snMspsConfig 32 }
snMspsEnhancedPassiveListeningCompatibility OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enables or disables Enhance Passive Listening Compatibility mode on this device.
If port wise configuration is supported, the port specific object
<snMspsPortEnhPassListComp> must be configured for each port in order to support the feature."
DEFVAL {disabled}
::= { snMspsConfig 35 }
snMspsConfigVrrpAcceptPing OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable/disable ability to accept pings to associated ip addresses"
DEFVAL {disabled}
::= { snMspsConfig 41}
snMspsOperLoginPasswordPolicy OBJECT-TYPE
SYNTAX INTEGER {
low(1),
medium(2),
high(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Shows the password policy which is enforced to users when determining their password.
Low - password should contain minimum 6 characters,
Medium - not supported,
High - password should contain minimum 8 characters, minimum 1 upper case character,
minimum 1 special character, and minimum 1 number."
DEFVAL {high}
::= { snMspsConfig 60 }
snMspsConfigLoginPasswordPolicy OBJECT-TYPE
SYNTAX INTEGER {
low(1),
medium(2),
high(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Sets the password policy which is enforced to users when determining their password.
Low - password should contain minimum 6 characters,
Medium - not supported,
High - password should contain minimum 8 characters, minimum 1 upper case character,
minimum 1 special character, and minimum 1 number."
DEFVAL {high}
::= { snMspsConfig 61 }
-- ----------------------------------------------------------------
-- MSPS Objects: USERS MIB
-- ----------------------------------------------------------------
snMspsLoginUsers OBJECT IDENTIFIER ::= { snMspsConfig 65 }
snMspsLoginUsersTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsLoginUsersTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the login usernames and privileges, which are currently created."
::= { snMspsLoginUsers 5 }
snMspsLoginUsersTableEntry OBJECT-TYPE
SYNTAX SnMspsLoginUsersTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"user table entry"
INDEX { snMspsLoginUserName }
::= { snMspsLoginUsersTable 1 }
SnMspsLoginUsersTableEntry ::= SEQUENCE {
snMspsLoginUserName DisplayString,
snMspsLoginUserPrivilege Integer32,
snMspsLoginUserRemoteAccess Integer32
}
snMspsLoginUserName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..255))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "User Name which is used as index of the snMspsLoginUserTable. "
::= { snMspsLoginUsersTableEntry 1 }
snMspsLoginUserPrivilege OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "User Privilege"
::= { snMspsLoginUsersTableEntry 2 }
snMspsLoginUserRemoteAccess OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Remote Access Filter . Value 0 means its allowed to access."
::= { snMspsLoginUsersTableEntry 3 }
-- ------------------------------------
-- Config Backup Configuration Group
-- ------------------------------------
snMspsConfigBackup OBJECT IDENTIFIER ::= { snMspsConfig 100 }
snMspsConfigBackupTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsConfigBackupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to display and to control the configuration pack backup."
::= { snMspsConfigBackup 10 }
snMspsConfigBackupEntry OBJECT-TYPE
SYNTAX SnMspsConfigBackupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry appears in this table for each configuration pack."
INDEX { snMspsConfigBackupIndex }
::= { snMspsConfigBackupTable 1 }
SnMspsConfigBackupEntry ::=
SEQUENCE {
snMspsConfigBackupIndex Integer32,
snMspsConfigBackupFileName DisplayString,
snMspsConfigBackupFileSize Integer32,
snMspsConfigBackupOperation INTEGER,
snMspsConfigBackupStatus RowStatus
}
snMspsConfigBackupIndex OBJECT-TYPE
SYNTAX Integer32 (1..32)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The auxiliary number of corresponding entry
representing settings of each config backup."
::= { snMspsConfigBackupEntry 1 }
snMspsConfigBackupFileName OBJECT-TYPE
SYNTAX DisplayString(SIZE (0..64))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The file name of configuration backup."
::= { snMspsConfigBackupEntry 4 }
snMspsConfigBackupFileSize OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The file size in kilobytes of configuration backup."
::= { snMspsConfigBackupEntry 7 }
snMspsConfigBackupOperation OBJECT-TYPE
SYNTAX INTEGER {
idle(0),
restore(1),
in-progress(2),
not-enough-storage(3),
error(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is a trigger and status variable.
Write access using restore(1), initiates restore of corresponding backup
configuration. After the operation is completed, the object will return idle(0).
Write access using other values as restore(1) will cause 'bad value' error.
Read access will return following values:
0 - No action in performing or last action was successfull.
2 - Last initiated action (restore or create new backup) is in progress.
3 - No enough free memory to create new configuration backup.
4 - Internal error during last action."
::= { snMspsConfigBackupEntry 50 }
snMspsConfigBackupStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This is a control variable.
It controls the instantiation of a conceptual row
in snMspsConfigBackupTable.
The new row cannot be activated as long as
snMspsConfigBackupFileName is not set."
::= { snMspsConfigBackupEntry 100 }
snMspsConfigSourceIpVlanId OBJECT-TYPE
SYNTAX INTEGER (0..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Configures the LoopBack IP interface VLAN ID (1 to 4094).
Non-Zero IPv4/IPv6 Address of this LoopBack interface will be
used as Source Address for management communication.
Using of Loopback IP as source IP is applicable for Syslog,
SMTP, NTP, SNTP, Radius and SNMP Packets generated from this
device.
If snMspsConfigSourceIpVlanId is 0, then this feature
is disabled.
If snMspsConfigSourceIpVlanId in non-zero,
and if the corresponding Loopback interface has IPv4 Address as
0.0.0.0, then this feature is disabled for all IPv4 management
communication.
If the loopback interface does not have an
active IPv6 Global Address, then this feature is disabled for
all IPv6 management communication."
DEFVAL {0}
::= { snMspsConfig 101 }
snMspsConfigNetworkFiltering OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable/disable ability to identify and temporarily filter source mac-addresses of the incoming network traffic that cause CPU congestion.
Traffic from identified source mac-addresses will not be switched for the filter period."
::= { snMspsConfig 201}
-- snMspsIfMainTable
-- This table is used for the management of all the interfaces in the
-- system.
snMspsIfMainTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsIfMainEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of all the interface entries in the system.
This table contains objects which are applicable to all
types of interfaces in the system. This table can be used
to monitor all the interface types. However only virtual and
logical interfaces could be created via this table.
Physical interfaces were created automatically during system initialization
and cannot be added or removed. This table is a
proprietary extension to the standard ifTable and
ifXTable. The index to this table has the semantics of
the MIB-2 ifIndex."
::= { snMspsIf 4 }
snMspsIfMainEntry OBJECT-TYPE
SYNTAX SnMspsIfMainEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing management information applicable
to a particular interface."
INDEX { snMspsIfMainIndex }
::= { snMspsIfMainTable 1 }
SnMspsIfMainEntry ::=
SEQUENCE {
snMspsIfMainIndex InterfaceIndex,
snMspsIfMainType INTEGER,
snMspsIfMainMtu Integer32,
snMspsIfMainAdminStatus INTEGER,
snMspsIfMainOperStatus INTEGER,
snMspsIfMainEncapType INTEGER,
snMspsIfMainBrgPortType INTEGER,
snMspsIfMainRowStatus RowStatus,
snMspsIfMainSubType INTEGER
}
snMspsIfMainIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A unique value, greater than zero, for each
interface. This object is identical to the ifIndex
of the standard MIB-2 ifTable."
::= { snMspsIfMainEntry 1 }
snMspsIfMainType OBJECT-TYPE
SYNTAX INTEGER {
rfc877x25(5), -- X.25
ethernetCsmacd(6), -- Ethernet/802.3
iso88025TokenRing(9), -- Token Ring
ppp(23), -- PPP link
softwareLoopback(24), -- Loopback Interface
frameRelay(32), -- Frame Relay DTE port
miox25(38), -- multiprotocol over x.25
-- used for X.25 VCs
aal5(49), -- AAL5 over ATM
propVirtual (53), -- Proprietary Virtual Interface
async(84), -- ASYNC
frameRelayMPI(92), -- multiprotocol
-- over FR
-- used for FR VCs
-- and sub-interfaces
pppMultilinkBundle(108), -- PPP Multilink
-- Bundle
ipOverAtm(114), -- IPoA virtual
hdlc(118), -- HDLC port
tunnel(131), -- Encapsulation interface
atmSubInterface(134), -- VCs under IPoA
l3ipvlan(136), -- Layer3 VLAN interface
mplsTunnel (150), -- MPLS Tunnel Virtual Interface
ieee8023ad(161), -- Link Aggregation Mib
mpls (166), -- MPLS
brgPort(209), -- Bridge port used for creating virtual ports in PBB
ilan(247), -- Internal-lan
pip (248) -- Virtual (Internal) Provider Instance port
} -- These are the currently supported
-- interfaces. More can be added at a
-- later time.
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type/protocol of interface. Specification of
the object is mandatory for all interfaces. This
value should be specified after the row creation
in the snMspsIfMainTable and before setting any other
object in this table. Once the type is specified,
it cannot be changed - the interface should be
deleted for changing the type of the interface.
The ethernetCsmacd(6), iso88025TokenRing(9), aal5(49),
async(84) and hdlc(118) are physical interfaces while
all other types are virtual or logical interfaces.
Specific ifIndex ranges are reserved for different interface types.
Creation of different types of interfaces is possible only within
their corresponding ifIndex range. So the snMspsIfMainType should be
configured corresponding to the ifIndex range reserved for that
particular interface type.
pip interface type will be used vritual Provider Instance port in
PBB bridge mode. physical PIPs can be created using ethernetCsmacd .
Following is the mapping of different port types and there snMspsIfMaintype values.
External ports
--------------
Port: snMspsIfMaintype Port type
-------------------------------------------------------------------
CNP- Ctagged 6 - customerNetworkPortCtagged (9)
CNP - Port based 6 - customerNetworkPortPortBased (2)
CNP- Stagged 6 - customerNetworkPortStagged (3)
PNP 6 - providerNetworkPort (1)
PIP 6 - providerInstancePort (11)
CBP 6 - customerBackbonePort (12)
Internal ports
--------------
VIP 209 - virtualInstancePort (10)
PIP 248 - providerInstancePort (11)
CBP 209 - customerBackbonePort (12)
brgPort will be used to create virtual PBB ports other than PIPs- VIPs and CBPs.
The propVirtual type denotes properietary logical interfaces. These
type of interfaces can be associated with a {physical interface,
switch instance} for the purpose of sharing the physical interface
to more than one context and thus realising Switch Instance Sharing
of a physical interface."
::= { snMspsIfMainEntry 2 }
snMspsIfMainMtu OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The MTU for the interface as shown to the higher
interface sub-layer (this value should not include
the encapsulation or header added by the interface).
If IP is operating over the interface, then this
value indicates the IP MTU over this interface.
For changing the MTU of any interface, the interface
must be brought down first - changing MTU while the
interface is administratively up is not permitted.
If not specified during interface creation, a default
value is assigned based on the snMspsIfMainType given to
the particular interface.
While configuring for logical VLAN interfaces, care
should be taken to, configure this value as the
lowest of the MTU values of the member ports."
::= { snMspsIfMainEntry 3 }
snMspsIfMainAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1), -- ready to pass packets
down(2),
testing(3) -- in some test mode
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The desired state of the interface. This object
can be set only when the snMspsIfMainRowStatus of the
interface is active. This object has the semantics
of the ifAdminStatus of the standard ifTable.
The testing(3) state indicates that no operational
packets can be passed - this state is not currently
supported.
When a managed system initializes, all
interfaces start with snMspsIfMainAdminStatus in the
down(2) state, it's a default state also. As a result
of either explicit management action or per
configuration information retained by the managed
system, snMspsIfMainAdminStatus is then changed to
the up (1) state (or remains in the
down(2) state)."
DEFVAL { down }
::= { snMspsIfMainEntry 4 }
snMspsIfMainOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1), -- ready to pass packets
down(2),
testing(3), -- in some test mode
unknown(4), -- status can not be
-- determined for
-- some reason.
dormant(5),
notPresent(6), -- some component is
-- missing
lowerLayerDown(7) -- down due to state
-- of lower-layer
-- interface(s).
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational state of the interface.
The testing (3) state indicates that no operational
packets can be passed - this state is not supported
currently.
If snMspsIfMainAdminStatus is down (2)
then snMspsIfMainOperStatus would be down (2). If
snMspsIfMainAdminStatus is changed to up (1) then
snMspsIfMainOperStatus should change to up (1) if the
interface is ready to transmit and receive
work traffic; it should change to dormant (5)
the interface is waiting for external actions
(such as a serial line waiting for an incoming
connection); it should change to lowerLayerDown(7)
state if it cannot be made up as the interface sub-layer
below it is down; it should remain in the down (2) state
if and only if there is a fault that prevents it
from going to the up (1) state; it should remain in
the notPresent (6) state if the interface has
missing (typically, hardware) components.
The status unknown(4) is shown when it is not possible
to determine the exact status of the interface - e.g.
the interface sub-layer is performing negotiations -
during this period the interface is not up but at the
same time, it is not a fault condition and hence it
cannot be shown as down - in such periods the status
is shown as unknown.
This object has the semantics of the ifOperStatus of the
standard ifTable."
::= { snMspsIfMainEntry 5 }
snMspsIfMainEncapType OBJECT-TYPE
SYNTAX INTEGER {
other(1),
nlpid(2), -- NLPID based encap
-- in the case of FR
-- and multiplexed
-- NLPID encap for X.25
nlpidSnap(3), -- NLPID-SNAP based
-- encap in the case
-- of FR and multiplexed
-- NLPID-SNAP encap for
-- X.25.
cudNlpid(4), -- dedicated NLPID for
-- X.25 only
cudNlpidSnap(5), -- dedicated
-- NLPID-SNAP for
-- X.25 only
llcSnap(6), -- for ATM VCs only
vcMultiplexed(7), -- for ATM VCs only
ethernetV2(8) -- for Ethernet interfaces
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The encapsulation type to be used over the interface.
For Ethernet interfaces, the default encapsulation
type is ethernetV2(8). The other possible encapsulation
is llcSnap(6). If other(1) is specified then an
automatic encapsulation type learning method is used
in ARP for determining the encapsulation for unicast
destinations while the multicast and broadcast destinations
use ethernetV2(8).
For PPP and MLPPP interfaces, the encapsulation type can
only be other(1) and this is the default value.
For FR VCs, the value can be nlpid(2) (for carrying protocols
which have NLPID) or nlpidSnap(3) (for other protocols). The
default is nlpid(2) and the types of protocols supported are
inferred from the stack-layering implemented over the
interface.
For X.25 VCs, the value can be nlpid(2) or nlpidSnap(3)
(where the VC can carry multiplexed protocol traffic with
each data packet containing the NLPID or SNAP header) or
cudNlpid(4) or cudNlpidSnap(5) (where the CUD specifies
the NLPID of the protocol or SNAP and the data packets do
not contain these headers - for dedicated VCs). The default
is cudNlpid(4).
For ATM VCs, the default is llcSnap(6) but the
vcMultiplexed(7) encapsulation is also supported.
This object is not applicable to other interfaces."
::= { snMspsIfMainEntry 6 }
snMspsIfMainBrgPortType OBJECT-TYPE
SYNTAX INTEGER {
providerNetworkPort (1),
customerNetworkPortPortBased (2),
customerNetworkPortStagged (3),
customerEdgePort (4),
propCustomerEdgePort (5),
propCustomerNetworkPort (6),
propProviderNetworkPort (7),
customerBridgePort (8),
customerNetworkPortCtagged (9),
virtualInstancePort (10),
providerInstancePort (11),
customerBackbonePort (12)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Bridge port type of this specified switch port.
Bridge Port type can be specified only for switch ports and not for
router ports, IVR interfaces and I-LAN Interfaces.
providerNetworkPort - Port Connected to a single Provider.
SVLAN Classification is based on only the PVID configured for the
port for untagged packets.
customerNetworkPortPortBased - Port in the S-VLAN component that
can transmit or received frames for single customer.
All packets received on this port, are mapped to one single service
instance identified by the PVID of that Port.
Acceptable Port Type will be always Admit only Untagged or Priority
Tagged Frames on this port.
customerNetworkPortStagged - Port in the S-VLAN component that
can transmit or received frames for single customer.
VLAN classification on this interface will be based on the S-tag
received or on the PVID of the port. Ingress Filtering will be
always enabled on this port.
customerEdgePort - Port in a Provider Edge Bridge connected to a
single customer. Multiple services can be provide on this port.
The Packets received on this interface will be first classified
to a CVLAN. CVLAN classification can be based on the Vid
in the C-Tag present in the packet (if it C-tagged packet) or from
the pvid of the port. Service instance selection (S-VLAN selection)
for a frame is done based on the entry present in the C-VID
registration table for the pair (C-VID, reception Port).
CustomerEdgePort configuration is allowed only in Provider Edge
Bridges.
propCustomerEdgePort - Port connected to a single customer, where
multiple services can be provided based on only Proprietary SVLAN
classification tables. S-VLAN classification will not happen based on
C-VID registration table on this port. propCustomerEdgePort
configuration is allowed only in Provider Edge Bridges.
propCustomerNetworkPort - Port connected to a single customer, where
multiple service can be provided based on CVLANs by assigning one of
the Proprietary SVLAN classification tables to this port. The
services can also be assigned using other proprietary SVLAN
classification tables where CVLAN is not the index of the table.
propProviderNetworkPort - Port connected to a Q-in-Q Bridge located
inside Provider Network. This port is part of S-VLAN component.
If packets to be tagged and sent out of this port will have 0x8100
as the ether type. Similarly pakcets with standard Q tag (ether type
as 0x8100) received will be considered as S-Tagged packets.
customerBridgePort - Type of the port to be used in customer
bridges as well in Provider(Q-in-Q) bridges. This type is not valid
in Provider Core bridges as well as Provider Edge bridge.
customerNetworkPortCtagged - Port in the I component that
can transmit or received frames for single customer.
VLAN classification on this interface will be based on the C-tag
received or on the default CVID of the port. Ingress Filtering will be
always enabled on this port.
virtualInstancePort - A Bridge Port on an I-component in a Backbone Edge Bridge
that provides access to a single backbone service instance.
providerInstancePort - The set of Virtual Instance Ports that are supported
by a single instance of the device.
customerBackbonePort - A Backbone Edge Bridge Port that can receive and transmit
I-tagged frames for multiple customers, and assign B-VIDs and translate I-SID on
the basis of the received I-SID.
In Customer bridges and in Provider Bridges only customerPort option
is allowed.
In Provider backbone bridge only customerNetworkPort, providerNetworkPort
and customerBackbonePort type of ports are allowed.
Bridge Port Type cannot be set for a port-channel port, if some
physical ports are aggregated in it.
Also Bridge Port type cannot be set for a port, if part of a
port-channel.
Whenever the Bridge port type changes, the previous configuration
associated with the port will be flushed.
For example.
whenever CNP(STagged) and PNP port types are changed to any
other port type,
- The unicast entries learnt on this port and
- The VID translation table entries associated with the port
will be flushed.
Whenever CEP port type is changed to any other port type,
- The unicast entries learnt on this port
- The C-VID registration table entries associated with the port
- The PEP configuration table entries
- The service priority regeneration table entries
will be flushed.
Even the vlan membership of the port will be removed when the
Pbport type is changed."
DEFVAL { 8 }
::= { snMspsIfMainEntry 7 }
snMspsIfMainRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A RowStatus variable for addition (except for physical interfaces),
deletion (except for physical interfaces ) and in-activation
of the interfaces. Specification of the object is mandatory
for all interfaces.
When the status is active, the interface is created and
ready to use in the respective protocol modules.
When the status is notInService, the interface has not been
registered with the respective protocol modules and as such
those modules are not aware of the existence of the interface
- creation is hence, incomplete. Setting an active interface
to notInService results in de-registration/deletion of the
interface from the respective protocol modules and all the
configurations associated with that interface in those modules
may be lost.
Deletion of an interface, may affect the status of other
interfaces which are layered above or below it in the Interface
Stack (ifStackTable) and may result in other interfaces being
made notReady or notInService."
::= { snMspsIfMainEntry 8 }
snMspsIfMainSubType OBJECT-TYPE
SYNTAX INTEGER {
extremeEther(251),
fastEther(252),
gigabitEthernet(253)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object stores the subType value of the specified interface.
Configuration of this object is not mandatory.By default
Sub type value will be updated based on the hardware link speed."
::= { snMspsIfMainEntry 9 }
-- snMspsIfIpTable
-- This table is used for the management of the interfaces in the
-- system which are registered with IP.
snMspsIfIpTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsIfIpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of all the interface entries in the system which
are registered with IP.
This table contains objects which are applicable for the
management of IP over the network interfaces
in the system.
This table is a extension to the snMspsIfMainTable.
The index to this table has the semantics of
the snMspsIfMainIndex of the snMspsIfMainTable.
Entries are created automatically in this table for
any interface sub-layer which is layer below IP using
the ifStackTable. Similarly, entries are deleted from
this table when the interface's layering below IP is
removed."
::= { snMspsIf 5 }
snMspsIfIpEntry OBJECT-TYPE
SYNTAX SnMspsIfIpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing management information applicable
to a particular interface over which IP is operating."
INDEX { snMspsIfMainIndex }
::= { snMspsIfIpTable 1 }
SnMspsIfIpEntry ::=
SEQUENCE {
snMspsIfIpAddrAllocMethod INTEGER,
snMspsIfIpAddr IpAddress,
snMspsIfIpSubnetMask IpAddress,
snMspsIfIpBroadcastAddr IpAddress,
snMspsIfIpForwardingEnable TruthValue,
snMspsIfIpAddrAllocProtocol INTEGER,
snMspsIfIpInterfaceName DisplayString
}
snMspsIfIpAddrAllocMethod OBJECT-TYPE
SYNTAX INTEGER {
manual(1), -- To be set by Manager
negotiation(2), -- obtained from peer
dynamic(3),
none(4) -- none of the above
} -- Currently only
-- these method possible.
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The mechanism to be used for allocation of IP
address for this interface.
The value negotiation can be used only for PPP
and MLPPP interfaces which support obtaining of
IP addresses through negotiation.
The dynamic(3) option takes an IP
address dynamically from the available
server (dhcp/bootp/rarp) according to the
protocol specified in snMspsIfIpAddrAllocProtocol.
If the method specified is manual and the IP
address is not provided (then the interface
would be treated as a un-numbered interface."
DEFVAL { none }
::= { snMspsIfIpEntry 1 }
snMspsIfIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the IP address given to this
interface. The specification of this object is
mandatory for all network interfaces (Ethernet,
FR VC, IPoA interface, PPP link - not under MP,
MP interface and X.25 VC). If the interface is
not a network interface then the default value
of 0.0.0.0 is assigned and the interface is
treated as a un-numbered interface by IP."
DEFVAL { '00000000'H }
::= { snMspsIfIpEntry 2 }
snMspsIfIpSubnetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the IP Subnet Mask for this
interface. The value should be specified only
for network interfaces and any valid VLSM is
accepted.
If not specified, this object takes the default
subnet mask value based on the class of the IP
address configured for the interface."
::= { snMspsIfIpEntry 3 }
snMspsIfIpBroadcastAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the IP broadcast address for this
interface. The value should be specified only
for network interfaces and any valid broadcast
address based on a valid VLSM is accepted.
If not specified, this object takes the default
value based on the class of the IP
address configured for the interface."
::= { snMspsIfIpEntry 4 }
snMspsIfIpForwardingEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies whether IP forwarding is enable on
this interface. Disabling IP forwarding on an
interface will result in packets which are to
be forwarded on that interface being dropped
and ICMP error messages being generated for the
packets."
DEFVAL { true }
::= { snMspsIfIpEntry 5 }
snMspsIfIpAddrAllocProtocol OBJECT-TYPE
SYNTAX INTEGER {
rarp(1),
dhcp(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the protocol to be used to obtain
IP address for this interface. This object is
valid only when snMspsIfIpAddrAllocMethod is set to
dynamic (3).
Currently rarp (1) option is not
supported. The assigned value will be effective
only when the interface admin status changes"
DEFVAL { dhcp }
::= { snMspsIfIpEntry 6 }
snMspsIfIpInterfaceName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Interface name for IP interfaces"
::= { snMspsIfIpEntry 7 }
-- snMspsIfIvrTable
-- This table is used for the Inter VLAN Routing related
-- configurations for each interface such as converting Bridged interfaces
-- to Routed interfaces and vice-versa.
snMspsIfIvrTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsIfIvrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of all the interfaces in the system with IVR related
configurations.
This table is an extension to the snMspsIfMainTable. The index to
this table has the semantics of the snMspsIfMainIndex of the
snMspsIfMainTable."
::= { snMspsIf 8 }
snMspsIfIvrEntry OBJECT-TYPE
SYNTAX SnMspsIfIvrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing IVR-related information applicable
to a interface."
INDEX { snMspsIfMainIndex }
::= { snMspsIfIvrTable 1 }
SnMspsIfIvrEntry ::=
SEQUENCE {
snMspsIfIvrBridgedIface
TruthValue,
snMspsIfIvrLoopBackIface
TruthValue
}
snMspsIfIvrBridgedIface OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates if this interface is a Bridged interface
or not.
A value of 'TRUE' indicates that this interface is
a Bridged interface and is capable of performing
bridging of packets through this interface.
A value of 'FALSE' indicates that this
interface is a Routed interface and is capable of
performing routing of packets through this interface."
::= { snMspsIfIvrEntry 1 }
snMspsIfIvrLoopBackIface OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates if this interface is a IVR Loopback interface
or not.
A value of 'TRUE' indicates that this IVR interface is
a Loopback Interface.
A value of 'FALSE' indicates that this IVR
interface is not a Loopback interface."
DEFVAL { false }
::= { snMspsIfIvrEntry 2 }
-- snMspsIfSecondaryIpAddressTable
-- This table is to configure secondary ip address over the interfaces
-- registered with IP.
snMspsIfSecondaryIpAddressTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsIfSecondaryIpAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of secondary IP addresses configured over the
interfaces registered with IP.
This table is a extension to the snMspsIfMainTable.
The index to this table has the semantics of
the snMspsIfMainIndex of the snMspsIfMainTable.
Secondary IpAddress configuration should not override the
primary ip address configured for any of the interface
Updation of entries in this table are not allowd when
RowStatus is active"
::= { snMspsIf 11 }
snMspsIfSecondaryIpAddressEntry OBJECT-TYPE
SYNTAX SnMspsIfSecondaryIpAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry contains the information associated with the
secondary(additional) ip address configured to a particular
interface."
INDEX { snMspsIfMainIndex , snMspsIfSecondaryIpAddress}
::= { snMspsIfSecondaryIpAddressTable 1 }
SnMspsIfSecondaryIpAddressEntry ::=
SEQUENCE {
snMspsIfSecondaryIpAddress IpAddress,
snMspsIfSecondaryIpSubnetMask IpAddress,
snMspsIfSecondaryIpBroadcastAddr IpAddress,
snMspsIfSecondaryIpRowStatus RowStatus,
snMspsIfSecondaryIpInterfaceName DisplayString
}
snMspsIfSecondaryIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies the Secondary IP address associated with the
interface"
::= {snMspsIfSecondaryIpAddressEntry 1 }
snMspsIfSecondaryIpSubnetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the IP Subnet Mask associted with the
secondary ip address configuration. The value should be
specified only for network interfaces and any valid
VLSM is accepted.
If not specified, this object takes the default
subnet mask value based on the class of the IP
address configured for the interface."
::= { snMspsIfSecondaryIpAddressEntry 2 }
snMspsIfSecondaryIpBroadcastAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the IP broadcast address associated with
the configured secondary IP address. The value should be
specified only for network interfaces and any valid
broadcast address based on a valid VLSM is accepted.
If not specified, this object takes the default
value based on the class of the IP
address configured for the interface."
::= { snMspsIfSecondaryIpAddressEntry 3 }
snMspsIfSecondaryIpRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to manage creation and deletion of rows
in this table."
::= { snMspsIfSecondaryIpAddressEntry 4 }
snMspsIfSecondaryIpInterfaceName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Interface name for secondary IP interfaces"
::= { snMspsIfSecondaryIpAddressEntry 5 }
-- snMspsIfOverviewIpAddressTable
-- This table is to display primary and secondary ip addresses over the interfaces
-- registered with IP.
snMspsIfOverviewIpAddressTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsIfOverviewIpAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of primary and secondary IP addresses configured over the
interfaces registered with IP."
::= { snMspsIf 15 }
snMspsIfOverviewIpAddressEntry OBJECT-TYPE
SYNTAX SnMspsIfOverviewIpAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry contains the information associated with the primary and
secondary(additional) ip addresses configured to a particular
interface."
INDEX { snMspsIfMainIndex , snMspsIfOverviewIpAddress}
::= { snMspsIfOverviewIpAddressTable 1 }
SnMspsIfOverviewIpAddressEntry ::=
SEQUENCE {
snMspsIfOverviewIpAddress IpAddress,
snMspsIfOverviewIpSubnetMask IpAddress,
snMspsIfOverviewIpBroadcastAddr IpAddress,
snMspsIfOverviewIpType INTEGER,
snMspsIfOverviewIpAddressACDStatus INTEGER
}
snMspsIfOverviewIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Shows primary and secondary IP addresses associated with the
interface"
::= {snMspsIfOverviewIpAddressEntry 1 }
snMspsIfOverviewIpSubnetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Shows the IP Subnet Mask associted with the
primary and secondary ip addresses configuration."
::= { snMspsIfOverviewIpAddressEntry 2 }
snMspsIfOverviewIpBroadcastAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Shows the IP broadcast address associated with
the configured primary and secondary IP addresses."
::= { snMspsIfOverviewIpAddressEntry 3 }
snMspsIfOverviewIpType OBJECT-TYPE
SYNTAX INTEGER {
primary(1),
secondary(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Shows IP address type: primary or secondary."
DEFVAL { secondary }
::= { snMspsIfOverviewIpAddressEntry 4 }
snMspsIfOverviewIpAddressACDStatus OBJECT-TYPE
SYNTAX INTEGER {
acdStatusIdle(0),
acdStatusStarting(1),
acdStatusConflict(2),
acdStatusDefending(3),
acdStatusActive(4),
acdStatusNotSupported(5),
acdStatusDisabled(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Shows IPV4 Address Collision Detection Status."
::= { snMspsIfOverviewIpAddressEntry 5 }
-- snMspsIfIvrMappingTable
-- Mapping of multiple Vlans to IVR interfaces.
snMspsIfIvrMappingTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsIfIvrMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to configure the list of vlans to be
associated for an IVR interface.
The primary Index to this table can only be a IVR interface.
Only considered if device supports corresponding functionality,
otherwise any set operation will fail with an inconsistentValue error
and get will return empty."
::= { snMspsIf 18 }
snMspsIfIvrMappingEntry OBJECT-TYPE
SYNTAX SnMspsIfIvrMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table gives an assoicated vlan to an IVR
interface."
INDEX { snMspsIfMainIndex, snMspsIfIvrAssociatedVlan }
::= { snMspsIfIvrMappingTable 1 }
SnMspsIfIvrMappingEntry ::=
SEQUENCE {
snMspsIfIvrAssociatedVlan VlanId,
snMspsIfIvrMappingRowStatus RowStatus
}
snMspsIfIvrAssociatedVlan OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies one of the associated VLANs for a given
IVR interface. Vlan Id associated with an IVR interface during
IVR interface creation, should not be configured as
snMspsIfIvrAssociatedVlan for that IVR interface.
snMspsIfIvrAssociatedVlan and the primary vlan (vlan associated with
IVR during IVR creation) for an IVR interface should be in the
same Layer 2 context."
::= { snMspsIfIvrMappingEntry 1 }
snMspsIfIvrMappingRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Denotes the Row Status for port isolation table entry.
Only 'CreateAndGo' and 'destroy' values are allowed for this
object. 'CreateAndWait' and 'notInService' values are not allowed.
Example:
To add vlans 2, 3 as associated vlans to an IVR interface with
interface index as 10 in this table, the following sequence
to be followed:
1. Set the snMspsIfIvrMappingRowStatus as 'CreateAndGo' for the
entry with index
(snMspsIfMainIndex = 10, snMspsIfIvrAssociatedVlan = 2)
2. Set the snMspsIfIvrMappingRowStatus as 'CreateAndGo' for the
entry with index
(snMspsIfMainIndex = 10, snMspsIfIvrAssociatedVlan = 3)
To delete vlan 3 from the list of associated vlans for an IVR
interface with IfIndex = 10 ports, do the following:
Set the snMspsIfIvrMappingRowStatus as 'destroy' for the
entry with index
(snMspsIfMainIndex = 10, snMspsIfIvrAssociatedVlan = 3)."
::= { snMspsIfIvrMappingEntry 2 }
-- --------------------------------------------------------------
-- SIMATIC NET MSPS SPECIFIC PORT MIB
-- --------------------------------------------------------------
-- --------------------------------------------------------------
-- PortTable Sub-Group
-- --------------------------------------------------------------
snMspsPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table containing per-port objects in the form of private
extensions of interface objects."
::= { snMspsPort 90 }
snMspsPortEntry OBJECT-TYPE
SYNTAX SnMspsPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Interface entry containing objects at the
subnetwork layer and below for a particular
interface."
INDEX { snMspsPortIndex }
::= { snMspsPortTable 1 }
SnMspsPortEntry ::= SEQUENCE {
snMspsPortIndex INTEGER,
snMspsPortFaultMaskState INTEGER,
snMspsPortLockState INTEGER,
snMspsPortFlowControlStatus TruthValue,
snMspsPortStandbyMaskState INTEGER,
snMspsPortBroadcastBlocking INTEGER,
snMspsPortDcpConfig INTEGER,
snMspsPortUnknownMulticastBlocking INTEGER,
snMspsPortActive TruthValue,
snMspsPortUnknownUnicastBlocking INTEGER,
snMspsPortMediaType INTEGER,
snMspsPortEnhPassListComp INTEGER,
snMspsPortQoSTrustMode INTEGER,
snMspsPortBlockState INTEGER,
snMspsPortRouterAdvertisementBlocking INTEGER,
snMspsPortAdminMacLearningStatus TruthValue,
snMspsPortMacLearningFlush INTEGER,
snMspsPortNOACtrlMode INTEGER
}
snMspsPortIndex OBJECT-TYPE
SYNTAX INTEGER (1..60)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Unique number for each interface. The number is in the range
1 to 26. The number for each interface must remain
constant at least from one re-initialization of the entity's
network management system to the next re-initialization."
::= { snMspsPortEntry 1 }
snMspsPortFaultMaskState OBJECT-TYPE
SYNTAX INTEGER {
checked-link-down(1),
notChecked(2),
checked-link-up(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Mask for checking link state of the port.
If a link of a masked as link down (checked-link-down) port
is down then a fault will be generated. If a link of a masked
as link up (checked-link-up) port is up then
a fault will be generated."
DEFVAL {notChecked}
::= { snMspsPortEntry 2 }
snMspsPortLockState OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
enabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Lock state of the port.
disabled (1) - MAC Learning and Forwarding enabled. Dynamic entries can be added.
enabled (2) - MAC Learning and Forwarding disabled. Dynamic entries alter to static."
DEFVAL {disabled}
::= { snMspsPortEntry 3 }
snMspsPortFlowControlStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current state of Flow Control on the port returned from the hardware"
::= { snMspsPortEntry 4 }
snMspsPortStandbyMaskState OBJECT-TYPE
SYNTAX INTEGER {
checked(1),
notChecked(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Mask for standby ports."
::= { snMspsPortEntry 6 }
snMspsPortBroadcastBlocking OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable / Disable broadcast blocking. Used to select which ports are
prevented from being forwarded broadcast packets."
::= { snMspsPortEntry 7 }
snMspsPortDcpConfig OBJECT-TYPE
SYNTAX INTEGER {
rxOnly(2),
txAndRx(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The administratively desired behavior of the device for DCP frames.
If the associated snMspsPortDcpConfig object has a
value of 'rxOnly(2)', then the device will receive,
but it will not transmit DCP frames on this port.
If the associated snMspsPortDcpConfig object has a
value of 'txAndRx(3)', then the device will transmit
and receive DCP frames on this port."
::= { snMspsPortEntry 8 }
snMspsPortUnknownMulticastBlocking OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable / Disable unknown multicast blocking. Used to select which ports are
prevented from being forwarded multicast packets to unknown multicast addresses."
::= { snMspsPortEntry 9 }
snMspsPortActive OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Setting this object to false(2) forces link down on this ports and its connected devices."
::= { snMspsPortEntry 10 }
snMspsPortUnknownUnicastBlocking OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable / Disable unknown unicast blocking. Used to select which ports are
prevented from being forwarded unicast packets to unknown unicast addresses."
::= { snMspsPortEntry 11 }
snMspsPortMediaType OBJECT-TYPE
SYNTAX INTEGER {
not-available(0),
auto(1),
copper(2),
optical(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Defines the currently active media type of the combo port.
Write access is only allowed for combo ports, i.e. ports that consist
of both a copper port and an optical port.
not-available(0) - the port is not a combo port; configuration of media type is not possible
auto (1) - the media type that has a connection is used; if both ports are connected, the optical port is preferred
copper (2) - the copper port is used
optical (3) - the optical port is used"
::= { snMspsPortEntry 12 }
snMspsPortEnhPassListComp OBJECT-TYPE
SYNTAX INTEGER {
not-available(0),
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enables or disables Enhanced Passive listening Compatibility mode on a specific port.
The global object snMspsEnhancedPassiveListeningCompatibility
must be configured accordingly to activate this configuration.
If the functionality is not available on corresponding device,
not-available(0) will be returned and no other value can be set."
DEFVAL {disabled}
::= { snMspsPortEntry 13 }
snMspsPortQoSTrustMode OBJECT-TYPE
SYNTAX INTEGER
{
not-available(0),
untrust(1),
trustcos(2),
trustdscp(3),
trustcos-dscp(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "
not-available (0) - the port qos trust mode is not supported
untrust (1) - packet qos parameters are assigned as per
port default priority settings
trust-cos (2) - if the packet is tagged the qos parameters
are assigned according to User Priority field, else like untrust
trust-dscp (3) - if the packet is IPv4/IPv6 qoS parameters
are assigned to the Dscp field or remapped Dscp, else like untrust
trust-cos-dscp (4) - if the packet is IPv4/IPv6 the packet is assigned like trustdscp
else if the packet is tagged like trustcos else like untrust"
::= { snMspsPortEntry 14 }
snMspsPortBlockState OBJECT-TYPE
SYNTAX INTEGER
{
not-available (0),
forwarding (1),
ring-redundancy (2),
spanning-tree (3),
loop-detected (4),
down-in-bundle (5),
la-loop-detected (6),
la-spanning-tree (7),
link-down (8),
admin-down (9),
power-down (10),
standby (11),
link-check (12),
mrp-interconnection (13)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
not-available (0) - the port block state analysis is not supported
forwarding (1) - not blocked by any configuration or protocol
ring-redundancy (2) - blocked as per ring-redundancy state assigned
spanning-tree (3) - blocked as per spanning-tree state assigned
loop-detected (4) - blocked as per loop-detection state assigned
down-in-bundle (5) - blocked as member of an aggregation
la-loop-detected (6) - blocked as per loop-detection state of LA
la-spanning-tree (7) - blocked as per spanning-tree state of LA
link-down (8) - blocked as per operative link state
admin-down (9) - blocked as per configured admin state
power-down (10) - blocked as per configured power state
standby (11) - blocked as per standby state assigned
link-check (12) - blocked as per link-check state assigned
mrp-interconnection (13) - blocked as per mrp-interconnection state assigned"
::= { snMspsPortEntry 15 }
snMspsPortRouterAdvertisementBlocking OBJECT-TYPE
SYNTAX INTEGER {
not-available (0),
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "
not-available (0) - Ipv6 Router Advertisements blocking not supported
enabled (1) - Ipv6 Router Advertisements blocking enabled
disabled (2) - Ipv6 Router Advertisements blocking disabled"
::= { snMspsPortEntry 20 }
snMspsPortAdminMacLearningStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "
Truth value used to configure the unicast MAC learning Admin status
for the port.
Value true (1), allows the unicast MAC learning on the port.
Value false(2), disables the unicast MAC learning on the port.
Status can not be set to false (2), if the device does not
support this feature"
DEFVAL { true }
::= { snMspsPortEntry 25 }
snMspsPortMacLearningFlush OBJECT-TYPE
SYNTAX INTEGER {
not-available(0),
disabled (1),
port-flush (2),
full-flush (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "
not-available (0) - This feature is not supported.
disabled (1) - On link down, learnt MAC will not be flushed
port-flush (2) - On link down, learnt MAC will be flushed only on this port
full-flush (3) - On link down, learnt MAC will be flushed for the entire switch"
::= { snMspsPortEntry 30 }
snMspsPortNOACtrlMode OBJECT-TYPE
SYNTAX INTEGER {
ot (0),
it (1),
both (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the port to access with Operational Technology (OT) Network or Information Technology (IT) Network or both.
Support only for physical ports and not for LA ports."
DEFVAL { both }
::= { snMspsPortEntry 35 }
snMspsTrapMSTPNewRootbridgeDetected TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"(M)STP new Rootbridge detected. Variable Bindings: Bridge Address, Old Root Bridge, New Root Bridge"
::= 251
snMspsTrapMSTPTopChange TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"(M)STP Topologychange detected."
::= 252
snMspsTrapPnacPortAuthStateChange TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Pnac port auth state change notification."
::= 451
snMspsTrapRmActiveState TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Redundancy manager entered active state."
::= 1451
snMspsTrapRmPassiveState TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Redundancy manager entered passive state."
::= 1452
snMspsTrapStandbyActiveState TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Standby manager entered active state."
::= 1501
snMspsTrapStandbyPassiveState TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Standby manager entered passive state."
::= 1502
snMspsTrapWlanGeneric TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"A generic WLAN event occured."
::= 1751
snMspsTrapWlanNewOverlapAp TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"New Overlap-AP found"
::= 1752
snMspsTrapWlanOverlapApAgedOut TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Overlap-AP aged out"
::= 1753
snMspsTrapWlanWdsUp TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"WDS interface is up"
::= 1754
snMspsTrapWlanWdsDown TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"WDS interface is down"
::= 1755
snMspsTrapWlanRadarDetected TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"DFS radar interference event occured"
::= 1756
snMspsTrapWlanRadarAgedOut TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"DFS channel aged out"
::= 1757
snMspsTrapWlanRadiusAccessAccepted TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"RADIUS: access from a client accepted"
::= 1758
snMspsTrapWlanRadiusAccessRejected TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"RADIUS: access request from a client rejected"
::= 1759
snMspsTrapWlanAuthToAPFailed TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Client: Authentication on AP failed"
::= 1761
snMspsTrapWlanAssociatedToAP TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Client: successfully associated to AP"
::= 1763
snMspsTrapWlanAssociationToAPFailed TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Client: Association failed"
::= 1764
snMspsTrapWlanDisassociatedFromAP TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Client: disassociated from AP"
::= 1765
snMspsTrapWlanDisassociationFromAPFailed TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Client: Disassotiation failed"
::= 1766
snMspsTrapWlanAuthenticationFromClientFailed TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"AP: Client authentication failed"
::= 1767
snMspsTrapWlanClientDeauthenticated TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Client: deauthenticated from AP"
::= 1768
snMspsTrapWlanClientAuthenticated TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Client: authenticated to AP"
::= 1769
snMspsTrapWlanClientAssociated TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Client: associated to AP"
::= 1770
snMspsTrapWlanAssociationFromClientFailed TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"AP: Client association failed"
::= 1771
snMspsTrapWlanClientDisassociated TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Client: disassociated from AP"
::= 1772
snMspsTrapWlanDisassociationFromClientFailed TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"AP: Client disassociation failed"
::= 1773
snMspsTrapWlanForcedRoaming TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Forced Roaming event occured"
::= 1774
snMspsTrapWlanIPCFMaxSta TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"iPCF: number of wireless clients too big for the cycle time"
::= 1781
snMspsTrapWlanIPCFMaxCycleTime TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"iPCF: Max. PROFINET cycle time exceeded"
::= 1782
snMspsTrapWlanIPCFMaxCyclicPollSize TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Max. size of PROFINET cyclic poll exceeded (too many PROFINET devices)"
::= 1783
snMspsTrapPowerLine1Down TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Power down on line L1."
::= 1851
snMspsTrapPowerLine1Up TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Power up on line L1."
::= 1852
snMspsTrapPowerLine2Down TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Power down on line L2."
::= 1853
snMspsTrapPowerLine2Up TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Power up on line L2."
::= 1854
snMspsTrapChangedFaultState TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Device changed fault state."
::= 1855
snMspsTrapPoEDown TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Power down on line 3 (PoE)."
::= 1856
snMspsTrapPoEUp TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Power up on line L3 (PoE)."
::= 1857
snMspsTrapEnvData TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"The device entered an considerable temperature / usage value.
Variable Bindigs: Message what happened"
::= 1860
snMspsTrapServiceInformation TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Service Information occured. Variable Bindigs: Message what happened"
::= 1861
snMspsTrapCLIScriptFileStatus TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"This trap is generated when a CLI script file was successfully loaded via TFTP and the file transfer was triggered through DHCP Options 66/67"
::= 1862
snMspsTrapConfigurationChange TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Informs user when configuration is changed"
::= 1863
snMspsTrapNTPInvalidConfiguration TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Invalid NTP Configuration."
::= 2101
snMspsTrapNTPWrongPacketLength TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Received NTP Packet with wrong length."
::= 2102
snMspsTrapNTPWrongSourceAddress TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Received NTP Packet from wrong Source Address."
::= 2103
snMspsTrapNTPWrongKeyId TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Received NTP Packet with wrong or missing Key Id."
::= 2104
snMspsTrapNTPAddAuthFail TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Secure NTP failed to add authentication."
::= 2105
snMspsTrapNTPVerifyAuthFail TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Received NTP Packet failed authentication."
::= 2106
snMspsTrapNTPKeyUpdate TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"SecureNTP Keys were updated."
::= 2107
snMspsTrapVRRPStateChange TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Device changed vrrp master state."
::= 2201
snMspsTrapLOOPDStateChange TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Device changed LOOPD state."
::= 2251
snMspsTrapOSPFStateChange TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Device changed OSPF route state."
::= 2301
snMspsTrapMNMobileConnectionSuccess TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Mobile connection successfull."
::= 2351
snMspsTrapMNMobileConnectionFailure TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Mobile connection failed."
::= 2352
snMspsTrapMNMobileConnectionLost TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Mobile connection lost."
::= 2353
snMspsTrapDigitalIOStateChange TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Digital IO pin state change detected."
::= 2851
snTrapMspsLinkCheckBrokenLinkDetected TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Link Check disabled port because of broken link."
::= 2901
snTrapMspsLinkCheckPortEnabled TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"By Link Check disabled port is enabled again."
::= 2902
snTrapMspsLinkCheckMultiplePartners TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Link Check detected multiple partners on port."
::= 2903
snTrapMspsLinkCheckMultiplePartnersReset TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Link Check partner detection reset on port."
::= 2904
snTrapMspsLinkCheckCriticalLinkDetected TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Link Check indicates critical link state on port."
::= 2905
snTrapMspsLinkCheckCriticalLinkReset TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"By Link Check indicated critical link state reset on port."
::= 2906
snTrapMspsLinkCheckUnapprovedConfigDetected TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Unapproved Link Check configuration. Disable Link Check on this port."
::= 2907
snTrapMspsLinkCheckUnapprovedConfigResolved TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Unapproved Link Check configuration resolved on this port."
::= 2908
snMspsTrapMrpInterconMgrOpenState TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"MRP Interconnection state change to open."
::= 3001
snMspsTrapMrpInterconMgrClosedState TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"MRP Interconnection state change to closed."
::= 3002
snMspsTrapPoeStateChange TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Poe state change notification."
::= 3051
-- --------------------------------------------------------------
-- SIMATIC NET MSPS SPECIFIC SFP MIB
-- --------------------------------------------------------------
-- --------------------------------------------------------------
-- SfpTable Sub-Group
-- --------------------------------------------------------------
snMspsSfpTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsSfpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table containing per-port objects in the form of private
extensions of interface objects."
::= { snMspsSfp 10 }
snMspsSfpEntry OBJECT-TYPE
SYNTAX SnMspsSfpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Interface entry containing objects at the
subnetwork layer and below for a particular
interface."
INDEX { snMspsSfpIndex }
::= { snMspsSfpTable 1 }
SnMspsSfpEntry ::= SEQUENCE {
snMspsSfpIndex INTEGER,
snMspsSfpStatus TruthValue,
snMspsSfpName DisplayString,
snMspsSfpModel DisplayString,
snMspsSfpRevision DisplayString,
snMspsSfpSerial DisplayString,
snMspsSfpNominalBitrate INTEGER,
snMspsSfpMaxLinkLength50 INTEGER,
snMspsSfpMaxLinkLength62 INTEGER,
snMspsSfpTemperature INTEGER,
snMspsSfpTemperatureMin INTEGER,
snMspsSfpTemperatureMax INTEGER,
snMspsSfpVoltage INTEGER,
snMspsSfpVoltageMin INTEGER,
snMspsSfpVoltageMax INTEGER,
snMspsSfpCurrent INTEGER,
snMspsSfpCurrentMin INTEGER,
snMspsSfpCurrentMax INTEGER,
snMspsSfpRxPower INTEGER,
snMspsSfpRxPowerMin INTEGER,
snMspsSfpRxPowerMax INTEGER,
snMspsSfpTxPower INTEGER,
snMspsSfpTxPowerMin INTEGER,
snMspsSfpTxPowerMax INTEGER,
snMspsSfpRxPowerdBm INTEGER,
snMspsSfpRxPowerMindBm INTEGER,
snMspsSfpRxPowerMaxdBm INTEGER,
snMspsSfpTxPowerdBm INTEGER,
snMspsSfpTxPowerMindBm INTEGER,
snMspsSfpTxPowerMaxdBm INTEGER
}
snMspsSfpIndex OBJECT-TYPE
SYNTAX INTEGER (1..52)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Unique number for each interface. The number is in the range
1 to 52. The number for each interface must remain
constant at least from one re-initialization of the entity's
network management system to the next re-initialization."
::= { snMspsSfpEntry 1 }
snMspsSfpStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates whether a SFP device in currently plugged in on this interface"
::= { snMspsSfpEntry 2 }
snMspsSfpName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..50))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The name of the SFP device"
::= { snMspsSfpEntry 3 }
snMspsSfpModel OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..50))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The model of the SFP device"
::= { snMspsSfpEntry 4 }
snMspsSfpRevision OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..50))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The revision number of the SFP device"
::= { snMspsSfpEntry 5 }
snMspsSfpSerial OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..50))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The serial number of the SFP device"
::= { snMspsSfpEntry 6 }
snMspsSfpNominalBitrate OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The nominal bitrate [MBit/s] of the SFP device"
::= { snMspsSfpEntry 7 }
snMspsSfpMaxLinkLength50 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The maximum link length(50/125um) of the SFP device"
::= { snMspsSfpEntry 8 }
snMspsSfpMaxLinkLength62 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The maximum link length(62/125um) of the SFP device"
::= { snMspsSfpEntry 9 }
snMspsSfpTemperature OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The temperature of the SFP device in 1/100 degree Celsius"
::= { snMspsSfpEntry 10 }
snMspsSfpTemperatureMin OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Minimum supported temperature of the SFP device in 1/100 degree Celsius"
::= { snMspsSfpEntry 11 }
snMspsSfpTemperatureMax OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Maximum supported temperature of the SFP device in 1/100 degree Celsius"
::= { snMspsSfpEntry 12 }
snMspsSfpVoltage OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The voltage of the SFP device"
::= { snMspsSfpEntry 13 }
snMspsSfpVoltageMin OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Minimum supported voltage of the SFP device"
::= { snMspsSfpEntry 14 }
snMspsSfpVoltageMax OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Maximum supported voltage of the SFP device"
::= { snMspsSfpEntry 15 }
snMspsSfpCurrent OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The bias current of the SFP device"
::= { snMspsSfpEntry 16 }
snMspsSfpCurrentMin OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Minimum supported bias current of the SFP device"
::= { snMspsSfpEntry 17 }
snMspsSfpCurrentMax OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Maximum supported bias current of the SFP device"
::= { snMspsSfpEntry 18 }
snMspsSfpRxPower OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The receive power of the SFP device in units of 0.1 uW"
::= { snMspsSfpEntry 19 }
snMspsSfpRxPowerMin OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Minimum supported receive power of the SFP device in units of 0.1 uW"
::= { snMspsSfpEntry 20 }
snMspsSfpRxPowerMax OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Maximum supported receive power of the SFP device in units of 0.1 uW"
::= { snMspsSfpEntry 21 }
snMspsSfpTxPower OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmit power of the SFP device in units of 0.1 uW"
::= { snMspsSfpEntry 22 }
snMspsSfpTxPowerMin OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Minimum supported transmit power of the SFP device in units of 0.1 uW"
::= { snMspsSfpEntry 23 }
snMspsSfpTxPowerMax OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Maximum supported transmit power of the SFP device in units of 0.1 uW"
::= { snMspsSfpEntry 24 }
snMspsSfpRxPowerdBm OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The receive power of the SFP device in units of 0.1 dBm. If this is -999 power is 0 uW"
::= { snMspsSfpEntry 32 }
snMspsSfpRxPowerMindBm OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Minimum supported receive power of the SFP device in units of 0.1 dBm. If this is -999 power is 0 uW"
::= { snMspsSfpEntry 33 }
snMspsSfpRxPowerMaxdBm OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Maximum supported receive power of the SFP device in units of 0.1 dBm. If this is -999 power is 0 uW"
::= { snMspsSfpEntry 34 }
snMspsSfpTxPowerdBm OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmit power of the SFP device in units of 0.1 dBm. If this is -999 power is 0 uW"
::= { snMspsSfpEntry 35 }
snMspsSfpTxPowerMindBm OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Minimum supported transmit power of the SFP device in units of 0.1 dBm. If this is -999 power is 0 uW"
::= { snMspsSfpEntry 36 }
snMspsSfpTxPowerMaxdBm OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Maximum supported transmit power of the SFP device in units of 0.1 dBm. If this is -999 power is 0 uW"
::= { snMspsSfpEntry 37 }
-- ----------------------------------------------------------------
-- MSPS Load& Save Global Objects
-- ----------------------------------------------------------------
snMspsLoadSaveRestartRequired OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Represents current state of the device according
to file transfer activities, which are done for files
registered by Load & Save component. If the current
state is 'true', the restart of the device is required."
DEFVAL { false }
::= { snMspsLoadSave 1 }
-- ----------------------------------------------------------------
-- MSPS Load & Save Group Objects
-- ----------------------------------------------------------------
snMspsLoadSavePasswords OBJECT IDENTIFIER ::= { snMspsLoadSave 5 }
snMspsLoadSaveTftp OBJECT IDENTIFIER ::= { snMspsLoadSave 10 }
snMspsLoadSaveSftp OBJECT IDENTIFIER ::= { snMspsLoadSave 11 }
-- ----------------------------------------------------------------
-- MSPS Load& Save Component Objects (Passwords)
-- ----------------------------------------------------------------
snMspsLoadSaveFilePasswordTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsLoadSaveFilePasswordEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Contains files, which are currently
registered by Load & Save component."
::= { snMspsLoadSavePasswords 10 }
snMspsLoadSaveFilePasswordEntry OBJECT-TYPE
SYNTAX SnMspsLoadSaveFilePasswordEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The row in the snMspsLoadSaveFilePasswordTable representing
password settings of configuration files, which are currently
registered by Load & Save component."
INDEX { snMspsLoadSaveFileIndex }
::= { snMspsLoadSaveFilePasswordTable 1 }
SnMspsLoadSaveFilePasswordEntry ::=
SEQUENCE {
snMspsLoadSaveFileIndex
OCTET STRING,
snMspsLoadSaveFileType
DisplayString,
snMspsLoadSaveFileEnablePassword
TruthValue,
snMspsLoadSaveFilePassword
OCTET STRING,
snMspsLoadSaveFilePasswordStatus
INTEGER
}
snMspsLoadSaveFileIndex OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The unique string representing file type ID."
::= { snMspsLoadSaveFilePasswordEntry 1 }
snMspsLoadSaveFileType OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The file type ID of registered file.
This string is identical to snMspsLoadSaveFileIndex."
::= { snMspsLoadSaveFilePasswordEntry 2 }
snMspsLoadSaveFileEnablePassword OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set 'true' if this file type needs a configured password."
DEFVAL { false }
::= { snMspsLoadSaveFilePasswordEntry 5 }
snMspsLoadSaveFilePassword OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The encrypted password value, which is used when accessing
registered file. This value has to be entered by user."
::= { snMspsLoadSaveFilePasswordEntry 10 }
snMspsLoadSaveFilePasswordStatus OBJECT-TYPE
SYNTAX INTEGER {
not-checked(0),
valid(1),
invalid(2),
required(3),
not-required(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current validation status of entered password.
0 - The password value is not considered by the file type.
1 - The password value stored in snMspsLoadSaveFilePassword
is valid for the corresponding file type.
2 - The password value stored in snMspsLoadSaveFilePassword
is invalid for the corresponding file type.
3 - The password value is required by the file type.
4 - The password value is not required by the file type."
::= { snMspsLoadSaveFilePasswordEntry 15 }
-- ----------------------------------------------------------------
-- MSPS Load& Save Component Objects (TFTP)
-- ----------------------------------------------------------------
snMspsLoadSaveTftpServerAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION "The IP address of TFTP server, which stores
the files registered by Load&Save component."
::= { snMspsLoadSaveTftp 1 }
snMspsLoadSaveTftpServerPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The port number of TFTP server, which stores
the files registered by Load&Save component."
::= { snMspsLoadSaveTftp 2 }
snMspsLoadSaveTftpServerInetAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The Inet address of TFTP server, which stores
the files registered by Load&Save component."
::= { snMspsLoadSaveTftp 5 }
snMspsLoadSaveTftpServerInetAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The Inet address type of TFTP server, which stores
the files registered by Load&Save component."
::= { snMspsLoadSaveTftp 6 }
snMspsLoadSaveTftpFileTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsLoadSaveTftpFileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of configuration files, which are currently
registered by Load & Save component."
::= { snMspsLoadSaveTftp 10 }
snMspsLoadSaveTftpFileEntry OBJECT-TYPE
SYNTAX SnMspsLoadSaveTftpFileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The row in the snMspsLoadSaveTftpFileTable representing
settings of configuration files, which are currently
registered by Load & Save component."
INDEX { snMspsLoadSaveTftpFileIndex }
::= { snMspsLoadSaveTftpFileTable 1 }
SnMspsLoadSaveTftpFileEntry ::=
SEQUENCE {
snMspsLoadSaveTftpFileIndex
OCTET STRING,
snMspsLoadSaveTftpFileType
DisplayString,
snMspsLoadSaveTftpFileName
DisplayString,
snMspsLoadSaveTftpFilePresent
INTEGER,
snMspsLoadSaveTftpFileLoadSupported
TruthValue,
snMspsLoadSaveTftpFileSaveSupported
TruthValue,
snMspsLoadSaveTftpFileDeleteSupported
TruthValue
}
snMspsLoadSaveTftpFileIndex OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The unique string representing file type ID."
::= { snMspsLoadSaveTftpFileEntry 1 }
snMspsLoadSaveTftpFileType OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The file type ID of registered file.
This string is identical to snMspsLoadSaveTftpFileIndex."
::= { snMspsLoadSaveTftpFileEntry 2 }
snMspsLoadSaveTftpFileName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The file name of registered file. The file name can also contain
the relative path starting from root folder of TFTP server."
::= { snMspsLoadSaveTftpFileEntry 3 }
snMspsLoadSaveTftpFilePresent OBJECT-TYPE
SYNTAX INTEGER {
not-present(0),
presentSave(1),
presentDelete(2),
presentSaveDelete(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Availability of the registered file on the device.
0 - the registered file is currently not present on device
1 - the registered file can be downloaded from device
2 - the registered file can be deleted on the device
3 - the registered file can be downloaded from device and
deleted on device
"
::= { snMspsLoadSaveTftpFileEntry 4 }
snMspsLoadSaveTftpFileLoadSupported OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Represents whether the Load functionality
is supported for this file type."
::= { snMspsLoadSaveTftpFileEntry 10 }
snMspsLoadSaveTftpFileSaveSupported OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Represents whether the Save functionality
is supported for this file type."
::= { snMspsLoadSaveTftpFileEntry 11 }
snMspsLoadSaveTftpFileDeleteSupported OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Represents whether the Delete functionality
is supported for this file type."
::= { snMspsLoadSaveTftpFileEntry 12 }
-- ----------------------------------------
-- TFTP File triggers table
-- ----------------------------------------
snMspsLoadSaveTftpFileTransferTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsLoadSaveTftpFileTransferEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This conceptual table is an extension of
snMspsLoadSaveTftpFileTable and contains file triggers for initiate
file operations with files registered by Load & Save component."
::= { snMspsLoadSaveTftp 11 }
snMspsLoadSaveTftpFileTransferEntry OBJECT-TYPE
SYNTAX SnMspsLoadSaveTftpFileTransferEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The row in the snMspsLoadSaveTftpFileTransferTable
representing file triggers of configuration files,
which are currently registered by Load & Save component."
AUGMENTS { snMspsLoadSaveTftpFileEntry }
::= { snMspsLoadSaveTftpFileTransferTable 1 }
SnMspsLoadSaveTftpFileTransferEntry ::=
SEQUENCE {
snMspsLoadSaveTftpFileLoad
INTEGER,
snMspsLoadSaveTftpFileSave
INTEGER,
snMspsLoadSaveTftpFileDelete
INTEGER
}
snMspsLoadSaveTftpFileLoad OBJECT-TYPE
SYNTAX INTEGER {
initial(1),
activate(2),
in-progress(3),
successNoRestart(4),
successRestartRequired(5),
loadError(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Write access using activate(2) initiates transfer
of registered file from TFTP server to device,
if this functionality is supported for this file type.
The support of functionality is represented in
snMspsLoadSaveTftpFileLoadSupported.
Write access using other values will cause 'bad value'
error. Read access will return following values:
1 - No Load transfers have been done for this file type
since last start of the device.
2 - Activate transfer of registered file from TFTP server
to device. If this file type does not support this
functionality, the 'bad value' error will be returned.
3 - Last transfer of registered file from TFTP server is in progress.
4 - Last transfer of registered file from TFTP server
was successfull. Device restart is not reqired.
5 - Last transfer of registered file from TFTP server
was successfull. Device restart is reqired.
6 - Last transfer of registered file from TFTP server
was not successfull."
::= { snMspsLoadSaveTftpFileTransferEntry 1 }
snMspsLoadSaveTftpFileSave OBJECT-TYPE
SYNTAX INTEGER {
initial(1),
activate(2),
in-progress(3),
successNoRestart(4),
successRestartRequired(5),
saveError(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Write access using activate(2) initiates transfer
of registered file from device to TFTP server,
if this functionality is supported for this file type.
The support of functionality is represented in
snMspsLoadSaveTftpFileSaveSupported.
Write access using other values will cause 'bad value'
error. Read access will return following values:
1 - No Save transfers have been done for this file type
since last start of the device.
2 - Activate transfer of registered file from device to
TFTP server. If this file type does not support this
functionality, the 'bad value' error will be returned.
3 - Last transfer of registered file from device is in progress.
4 - Last transfer of registered file from device
was successfull. Device restart is not reqired.
5 - Last transfer of registered file from device
was successfull. Device restart is reqired.
6 - Last transfer of registered file from device
was not successfull."
::= { snMspsLoadSaveTftpFileTransferEntry 2 }
snMspsLoadSaveTftpFileDelete OBJECT-TYPE
SYNTAX INTEGER {
initial(1),
activate(2),
in-progress(3),
successNoRestart(4),
successRestartRequired(5),
deleteError(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Write access using activate(2) initiates deletion
of registered file on TFTP server,
if this functionality is supported for this file type.
The support of functionality is represented in
snMspsLoadSaveTftpFileDeleteSupported.
Write access using other values will cause 'bad value'
error. Read access will return following values:
1 - No Delete actions have been done for this file type
since device start.
2 - Activate deletion of registered file on TFTP server
If this file type does not support this functionality,
the 'bad value' error will be returned.
3 - Deletion of registered file on TFTP server is in progress.
4 - Last deletion of registered file on TFTP server
was successfull. Restart of the device is not reqired.
5 - Last deletion of registered file on TFTP server
was successfull. Restart of the device is reqired.
6 - Last deletion of registered file on TFTP server
was not successfull."
::= { snMspsLoadSaveTftpFileTransferEntry 3 }
-- ----------------------------------------------------------------
-- MSPS Load& Save Component Objects (SFTP)
-- ----------------------------------------------------------------
snMspsLoadSaveSftpServerInetAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The IP address of SFTP server, which stores
the files registered by Load&Save component."
::= { snMspsLoadSaveSftp 1 }
snMspsLoadSaveSftpServerInetAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The Inet address type of SFTP server, which stores
the files registered by Load&Save component."
::= { snMspsLoadSaveSftp 2 }
snMspsLoadSaveSftpServerPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The port number of SFTP server, which stores
the files registered by Load&Save component."
::= { snMspsLoadSaveSftp 3 }
snMspsLoadSaveSftpServerUser OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The user ID, which has to be allowed
for login to SFTP server."
::= { snMspsLoadSaveSftp 6 }
snMspsLoadSaveSftpServerPassword OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The user password, which has to be valid
for login with user ID defined in
snMspsLoadSaveSftpServerUser to SFTP server."
::= { snMspsLoadSaveSftp 7 }
snMspsLoadSaveSftpFileTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsLoadSaveSftpFileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of configuration files, which are currently
registered by Load & Save component."
::= { snMspsLoadSaveSftp 10 }
snMspsLoadSaveSftpFileEntry OBJECT-TYPE
SYNTAX SnMspsLoadSaveSftpFileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The row in the snMspsLoadSaveSftpFileTable representing
settings of configuration files, which are currently
registered by Load & Save component."
INDEX { snMspsLoadSaveSftpFileIndex }
::= { snMspsLoadSaveSftpFileTable 1 }
SnMspsLoadSaveSftpFileEntry ::=
SEQUENCE {
snMspsLoadSaveSftpFileIndex
OCTET STRING,
snMspsLoadSaveSftpFileType
DisplayString,
snMspsLoadSaveSftpFileName
DisplayString,
snMspsLoadSaveSftpFilePresent
INTEGER,
snMspsLoadSaveSftpFileLoadSupported
TruthValue,
snMspsLoadSaveSftpFileSaveSupported
TruthValue,
snMspsLoadSaveSftpFileDeleteSupported
TruthValue
}
snMspsLoadSaveSftpFileIndex OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The unique string representing file type ID."
::= { snMspsLoadSaveSftpFileEntry 1 }
snMspsLoadSaveSftpFileType OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The file type ID of registered file.
This string is identical to snMspsLoadSaveSftpFileIndex."
::= { snMspsLoadSaveSftpFileEntry 2 }
snMspsLoadSaveSftpFileName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The file name of registered file. The file name can also contain
the relative path starting from root folder of SFTP server."
::= { snMspsLoadSaveSftpFileEntry 3 }
snMspsLoadSaveSftpFilePresent OBJECT-TYPE
SYNTAX INTEGER {
not-present(0),
presentSave(1),
presentDelete(2),
presentSaveDelete(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Availability of the registered file on the device.
0 - the registered file is currently not present on device
1 - the registered file can be downloaded from device
2 - the registered file can be deleted on the device
3 - the registered file can be downloaded from device and
deleted on device
"
::= { snMspsLoadSaveSftpFileEntry 4 }
snMspsLoadSaveSftpFileLoadSupported OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Represents whether the Load functionality
is supported for this file type."
::= { snMspsLoadSaveSftpFileEntry 10 }
snMspsLoadSaveSftpFileSaveSupported OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Represents whether the Save functionality
is supported for this file type."
::= { snMspsLoadSaveSftpFileEntry 11 }
snMspsLoadSaveSftpFileDeleteSupported OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Represents whether the Delete functionality
is supported for this file type."
::= { snMspsLoadSaveSftpFileEntry 12 }
-- ----------------------------------------
-- SFTP File triggers table
-- ----------------------------------------
snMspsLoadSaveSftpFileTransferTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsLoadSaveSftpFileTransferEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This conceptual table is an extension of
snMspsLoadSaveSftpFileTable and contains file triggers for initiate
file operations with files registered by Load & Save component."
::= { snMspsLoadSaveSftp 11 }
snMspsLoadSaveSftpFileTransferEntry OBJECT-TYPE
SYNTAX SnMspsLoadSaveSftpFileTransferEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The row in the snMspsLoadSaveSftpFileTransferTable
representing file triggers of configuration files,
which are currently registered by Load & Save component."
AUGMENTS { snMspsLoadSaveSftpFileEntry }
::= { snMspsLoadSaveSftpFileTransferTable 1 }
SnMspsLoadSaveSftpFileTransferEntry ::=
SEQUENCE {
snMspsLoadSaveSftpFileLoad
INTEGER,
snMspsLoadSaveSftpFileSave
INTEGER,
snMspsLoadSaveSftpFileDelete
INTEGER
}
snMspsLoadSaveSftpFileLoad OBJECT-TYPE
SYNTAX INTEGER {
initial(1),
activate(2),
in-progress(3),
successNoRestart(4),
successRestartRequired(5),
loadError(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Write access using activate(2) initiates transfer
of registered file from SFTP server to device,
if this functionality is supported for this file type.
The support of functionality is represented in
snMspsLoadSaveSftpFileLoadSupported.
Write access using other values will cause 'bad value'
error. Read access will return following values:
1 - No Load transfers have been done for this file type
since last start of the device.
2 - Activate transfer of registered file from SFTP server
to device. If this file type does not support this
functionality, the 'bad value' error will be returned.
3 - Last transfer of registered file from SFTP server is in progress.
4 - Last transfer of registered file from SFTP server
was successfull. Device restart is not reqired.
5 - Last transfer of registered file from SFTP server
was successfull. Device restart is reqired.
6 - Last transfer of registered file from SFTP server
was not successfull."
::= { snMspsLoadSaveSftpFileTransferEntry 1 }
snMspsLoadSaveSftpFileSave OBJECT-TYPE
SYNTAX INTEGER {
initial(1),
activate(2),
in-progress(3),
successNoRestart(4),
successRestartRequired(5),
saveError(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Write access using activate(2) initiates transfer
of registered file from device to SFTP server,
if this functionality is supported for this file type.
The support of functionality is represented in
snMspsLoadSaveSftpFileSaveSupported.
Write access using other values will cause 'bad value'
error. Read access will return following values:
1 - No Save transfers have been done for this file type
since last start of the device.
2 - Activate transfer of registered file from device to
SFTP server. If this file type does not support this
functionality, the 'bad value' error will be returned.
3 - Last transfer of registered file from device is in progress.
4 - Last transfer of registered file from device
was successfull. Device restart is not reqired.
5 - Last transfer of registered file from device
was successfull. Device restart is reqired.
6 - Last transfer of registered file from device
was not successfull."
::= { snMspsLoadSaveSftpFileTransferEntry 2 }
snMspsLoadSaveSftpFileDelete OBJECT-TYPE
SYNTAX INTEGER {
initial(1),
activate(2),
in-progress(3),
successNoRestart(4),
successRestartRequired(5),
deleteError(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Write access using activate(2) initiates deletion
of registered file on SFTP server,
if this functionality is supported for this file type.
The support of functionality is represented in
snMspsLoadSaveSftpFileDeleteSupported.
Write access using other values will cause 'bad value'
error. Read access will return following values:
1 - No Delete actions have been done for this file type
since device start.
2 - Activate deletion of registered file on SFTP server
If this file type does not support this functionality,
the 'bad value' error will be returned.
3 - Deletion of registered file on SFTP server is in progress.
4 - Last deletion of registered file on SFTP server
was successfull. Restart of the device is not reqired.
5 - Last deletion of registered file on SFTP server
was successfull. Restart of the device is reqired.
6 - Last deletion of registered file on SFTP server
was not successfull."
::= { snMspsLoadSaveSftpFileTransferEntry 3 }
snMspsHttpRedirectionStatus OBJECT-TYPE
SYNTAX INTEGER { disabled (1), enabled (2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of the HTTP redirection"
DEFVAL { 1 }
::= { snMspsHttp 1 }
snMspsHttpToHttpsRedirectionStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of the HTTP to HTTPS redirection.
If device do not support this feature, the value of this MIB object
can not be set to true."
DEFVAL { false }
::= { snMspsHttp 2 }
-- snMspsHttp 3 reserved
snMspsHttpRedirectionTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsHttpRedirectionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the Redirection related objects"
::= { snMspsHttp 4 }
snMspsHttpRedirectionEntry OBJECT-TYPE
SYNTAX SnMspsHttpRedirectionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the snMspsHttpRedirectionTable."
INDEX { snMspsHttpRedirectionURL }
::= { snMspsHttpRedirectionTable 1 }
SnMspsHttpRedirectionEntry ::= SEQUENCE {
snMspsHttpRedirectionURL DisplayString,
snMspsHttpRedirectedSrvAddrType InetAddressType,
snMspsHttpRedirectedSrvIP InetAddress,
snMspsHttpRedirectedSrvDomainName DisplayString,
snMspsHttpRedirectionEntryStatus RowStatus
}
snMspsHttpRedirectionURL OBJECT-TYPE
SYNTAX DisplayString (SIZE (100))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The URL which has to be redirected"
::= { snMspsHttpRedirectionEntry 1 }
snMspsHttpRedirectedSrvAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Address type of HTTP server to which URL has to be
redirected"
::= { snMspsHttpRedirectionEntry 2 }
snMspsHttpRedirectedSrvIP OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The IP address of the HTTP Server to which redirect has to be done
interface belongs to"
::= { snMspsHttpRedirectionEntry 3 }
snMspsHttpRedirectedSrvDomainName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The domain name of the HTTP server to which the URL has to be
has to redirected"
::= { snMspsHttpRedirectionEntry 4 }
snMspsHttpRedirectionEntryStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of HTTP redirection table entry"
::= { snMspsHttpRedirectionEntry 5 }
-- snMspsHttp 6 reserved
snMspsWBMTimeOut OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Time out for the Web-Based-Management in seconds. Range 60s to 3600s.
If value is 0, timeout is disabled."
DEFVAL {900}
::= { snMspsHttp 7 }
snMspsWBMDefaultLoginPage OBJECT-TYPE
SYNTAX INTEGER { configuration (0), firewall (1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Default login page for the Web-Based-Management."
DEFVAL {0}
::= { snMspsHttp 8 }
-- snMspsHttp 9 reserved
snMspsHttpPort OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port to be used by the hosts/PC to configure the device using the Web Interface
Allowed values are default port and ports in the dynamic port range (49500-65535).
Get operation return current listening port.
The HTTP server must be disabled before this configuration is done
Set operation return Inconsistent value for any one of the following
1. if the set port value is other than allowed port range or
2. if the port already used by another service in the device or
3. if the device does not support to change the port."
DEFVAL { 80 }
::= { snMspsHttp 10 }
snMspsHttpStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is for enabling or disabling HTTP in the system."
::= { snMspsHttp 11 }
-- snMspsHttp 12-14 reserved
snMspsHttpSslSecureHttpMinTlsVersion OBJECT-TYPE
SYNTAX INTEGER {
tlsv10 (769),
tlsv11 (770),
tlsv12 (771),
tlsv13 (772)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object holds the configuration of the minimum Tls Version for secure HTTP in the system."
DEFVAL { tlsv11 }
::= { snMspsHttp 15}
snMspsHttpSslSecureHttpStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is for enabling or disabling secure HTTP in the system."
DEFVAL { disable }
::= { snMspsHttp 16 }
snMspsHttpSslPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is to configure the SSL port.
Allowed values are default port and ports in the dynamic port range (49500-65535).
Get operation return current listening port.
The HTTP Secure server must be disabled before this configuration is done
Set operation return Inconsistent value for any one of the following
1. if the set port value is other than allowed port range or
2. if the port already used by another service in the device or
3. if the device does not support to change the port."
DEFVAL { 443 }
::= { snMspsHttp 17 }
snMspsHttpSshStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is for enabling or disabling ssh in the system."
DEFVAL { true }
::= { snMspsHttp 18}
snMspsHttpSshPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SSh service's server listening port.
Allowed values are default port and ports in the dynamic port range (49500-65535).
Get operation return current listening port.
The SSH server must be disabled before this configuration is done
Set operation return Inconsistent value for any one of the following
1. if the set port value is other than allowed port range or
2. if the port already used by another service in the device or
3. if the device does not support to change the port."
DEFVAL { 22 }
::= { snMspsHttp 19 }
snMspsHttpTelnetPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Telnet service's server listening port.
Allowed values are default port and ports in the dynamic port range (49500-65535).
Get operation return current listening port.
The Telnet server must be disabled before this configuration is done
Set operation return Inconsistent value for any one of the following
1. if the set port value is other than allowed port range or
2. if the port already used by another service in the device or
3. if the device does not support to change the port."
DEFVAL { 23 }
::= { snMspsHttp 23 }
-- ----------------------------------------------------------------
-- SN-MSPS-RR-MIB Group Objects
-- ----------------------------------------------------------------
-- ----------------------------------------------------------------
-- MSPS Component Objects: SN-MSPS-RR-MIB
-- ----------------------------------------------------------------
snMspsRingRedundancyMode OBJECT-TYPE
SYNTAX INTEGER {
ringRedundancyOff(1),
ringRedundancyHrpOn(2),
ringRedundancyMrpOn(3),
ringRedundancyArd(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Redundancy Mode:
ringRedundancyOff(1) - no redundancy
ringRedundancyHrpOn(2) - high speed redundancy protocol
ringRedundancyMrpOn(3) - media redundancy protocol
ringRedundancyArd(4) - automatic redundancy detection."
::= { snMspsRingRedundancy 1 }
snMspsHrpRmMode OBJECT-TYPE
SYNTAX INTEGER {
rmOff(1),
rmOn(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "HRP RM mode."
::= { snMspsRingRedundancy 2 }
snMspsRmState OBJECT-TYPE
SYNTAX INTEGER {
rmPassive(1),
rmActive(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "RM State."
::= { snMspsRingRedundancy 3 }
snMspsRmStateChanges OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of changes to RM active state."
::= { snMspsRingRedundancy 4 }
snMspsStaticPort OBJECT-TYPE
SYNTAX INTEGER (1..26)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Portnumber of static port (HRP) or RingPort 2 (MRP)."
::= { snMspsRingRedundancy 5 }
snMspsIsolatedPort OBJECT-TYPE
SYNTAX INTEGER (1..26)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Portnumber of isolated port (HRP) or RingPort 1 (MRP)."
::= { snMspsRingRedundancy 6 }
snMspsTestMaxDelay OBJECT-TYPE
SYNTAX INTEGER (0..200)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Measured maximum delay of RM test telegrams."
::= { snMspsRingRedundancy 7 }
snMspsRmResetCounters OBJECT-TYPE
SYNTAX INTEGER {
no-operation(1),
reset(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Reset all counters of Redundancy protocol software. At the moment only supported for HRP."
::= { snMspsRingRedundancy 8 }
snMspsMrpRmMode OBJECT-TYPE
SYNTAX INTEGER {
rmOff(1),
rmOn(2),
rmNormOn(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "MRP RM mode.
rmOff(1) - ring client
rmOn(2) - ring manager (MRP AUTO manager if ringRedundancyMrpOn)
rmNormOn(3) - ring norm manager (MRP NORM manager if ringRedundancyMrpOn)"
::= { snMspsRingRedundancy 9 }
snMspsRingRedundancyOperState OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
hrpClient(2),
hrpManager(3),
mrpClient(4),
mrpManager(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Ring Redundancy Oper State:
disabled(1) - no redundancy
hrpClient(2) - high speed redundancy protocol client
hrpManager(3) - high speed redundancy protocol manager
mrpClient(4) - media redundancy protocol client
mrpManager(5) - media redundancy protocol manager."
::= { snMspsRingRedundancy 10 }
snMspsHrpRedundancyLostFaultLED OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enables or disables the Fault LED when Ring Redundancy (HRP and MRP) is lost (Redundancy Manager or Standby)."
DEFVAL {2}
::= { snMspsRingRedundancy 11 }
snMspsMrpDomainName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..240))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Media redundancy protocol domain name."
::= { snMspsRingRedundancy 16 }
snMspsMrpRestoreDefaultConfig OBJECT-TYPE
SYNTAX INTEGER {
no-operation(1),
restore-default(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Restore default ring redundancy configuration."
::= { snMspsRingRedundancy 20 }
-- --------------------------------------------------------------------------------
-- SIMATIC NET MSPS Product Specific MRP Multi-Ring Objects:
-- --------------------------------------------------------------------------------
snMspsMultiMrpTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsMultiMrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table containing MRP multi-ring configuration."
::= { snMspsRingRedundancy 30 }
snMspsMultiMrpEntry OBJECT-TYPE
SYNTAX SnMspsMultiMrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Interface entry containing objects for MRP multi-ring configuration."
INDEX { snMspsMultiMrpIndex }
::= { snMspsMultiMrpTable 1 }
SnMspsMultiMrpEntry ::= SEQUENCE {
snMspsMultiMrpIndex INTEGER,
snMspsMultiMrpDomainName DisplayString,
snMspsMultiMrpAdminMode INTEGER,
snMspsMultiMrpAdminRole INTEGER,
snMspsMultiHrpAdminRole INTEGER,
snMspsMultiMrpAdminRingPort1 INTEGER,
snMspsMultiMrpAdminRingPort2 INTEGER,
snMspsMultiMrpOperState INTEGER,
snMspsMultiRmState INTEGER,
snMspsMultiMrpOperRingPort1 INTEGER,
snMspsMultiMrpOperRingPort2 INTEGER,
snMspsMultiMrpRmStateChanges Counter32,
snMspsMultiMrpTestMaxDelay INTEGER,
snMspsMultiMrpStatus RowStatus
}
snMspsMultiMrpIndex OBJECT-TYPE
SYNTAX INTEGER (1..4)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Unique number for each MRP ring. The number for each MRP ring must remain
constant at least from one re-initialization of the entity's
network management system to the next re-initialization."
::= { snMspsMultiMrpEntry 1 }
snMspsMultiMrpDomainName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Instance MRP domain name."
::= { snMspsMultiMrpEntry 3 }
snMspsMultiMrpAdminMode OBJECT-TYPE
SYNTAX INTEGER {
ringRedundancyOff(1),
ringRedundancyHrpOn(2),
ringRedundancyMrpOn(3),
ringRedundancyArd(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "ringRedundancyOff(1) - no redundancy
ringRedundancyHrpOn(2) - high speed redundancy protocol
ringRedundancyMrpOn(3) - media redundancy protocol
ringRedundancyArd(4) - automatic redundancy detection."
::= { snMspsMultiMrpEntry 9 }
snMspsMultiMrpAdminRole OBJECT-TYPE
SYNTAX INTEGER {
rmOff(1),
rmOn(2),
rmNormOn(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "rmOff(1) - ring client
rmOn(2) - ring manager (MRP AUTO manager if ringRedundancyMrpOn)
rmNormOn(3) - ring norm manager (MRP NORM manager if ringRedundancyMrpOn)"
::= { snMspsMultiMrpEntry 12 }
snMspsMultiHrpAdminRole OBJECT-TYPE
SYNTAX INTEGER {
rmOff(1),
rmOn(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "rmOff(1) - HRP ring client
rmOn(2) - HRP ring manager"
::= { snMspsMultiMrpEntry 14 }
snMspsMultiMrpAdminRingPort1 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Configured Portnumber of first ring-port."
::= { snMspsMultiMrpEntry 16 }
snMspsMultiMrpAdminRingPort2 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Configured Portnumber of second ring-port."
::= { snMspsMultiMrpEntry 19 }
snMspsMultiMrpOperState OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
hrpClient(2),
hrpManager(3),
mrpClient(4),
mrpManager(5),
mrpNormManager(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "disabled(1) - no redundancy
hrpClient(2) - high speed redundancy protocol client
hrpManager(3) - high speed redundancy protocol manager
mrpClient(4) - media redundancy protocol client
mrpManager(5) - media redundancy protocol auto manager
mrpNormManager(6) - media redundancy protocol norm manager"
::= { snMspsMultiMrpEntry 21 }
snMspsMultiRmState OBJECT-TYPE
SYNTAX INTEGER {
rmPassive(1),
rmActive(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Current Redundancy Manager's active/passive state."
::= { snMspsMultiMrpEntry 23 }
snMspsMultiMrpOperRingPort1 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Current first ring-port's portnumber."
::= { snMspsMultiMrpEntry 25 }
snMspsMultiMrpOperRingPort2 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Current second ring-port's portnumber."
::= { snMspsMultiMrpEntry 28 }
snMspsMultiMrpRmStateChanges OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of changes to RM active state."
::= { snMspsMultiMrpEntry 31 }
snMspsMultiMrpTestMaxDelay OBJECT-TYPE
SYNTAX INTEGER (0..200)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Measured maximum delay of RM test telegrams."
::= { snMspsMultiMrpEntry 36 }
snMspsMultiMrpStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The status of the aggregation row."
::= { snMspsMultiMrpEntry 40 }
snMspsTrapRmActiveState NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"Redundancy manager entered active state."
::= { snMspsTrapPrefix 1451 }
snMspsTrapRmPassiveState NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"Redundancy manager entered passive state."
::= { snMspsTrapPrefix 1452 }
snMspsStandbyMode OBJECT-TYPE
SYNTAX INTEGER {
standbyOn(1),
standbyOff(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Standby connection mode."
::= { snMspsRingRedundancyStandby 1 }
snMspsStandbyConnectionName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The standby connection name (Max 32 Symbol)."
::= { snMspsRingRedundancyStandby 3 }
snMspsStandbyState OBJECT-TYPE
SYNTAX INTEGER {
standbyMasterPassive(1),
standbySlavePassive(3),
standbyMasterActive(5),
standbySlaveActive(7),
standbyMasterPassive-lost(17),
standbySlavePassive-lost(19),
standbyMasterActive-lost(21),
standbySlaveActive-lost(23),
standbyWaitingForPartner(257),
standbyDisabled(300)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Standby connection state.
Bit 0 is always 1, bit 1 is Master/Slave,
bit 2 is Active/Passive and bit 8 is Partner not found or not.
standbyMasterPassive(1) - Master in passive state
standbySlavePassive(3) - Slave in passive state
standbyMasterActive(5) - Master in active state
standbySlaveActive(7) - Slave in passive state
standbyMasterPassive-lost(17) - Master in passive state but partner is lost
standbySlavePassive-lost(19) - Slave in passive state but partner is lost
standbyMasterActive-lost(21) - Master in active state but partner is lost
standbySlaveActive-lost(23) - Slave in active state but partner is lost
standbyWaitingForPartner(257) - Waiting for partner, partner was not yet found
standbyDisabled(300) - Standby connection is disabled"
::= { snMspsRingRedundancyStandby 4 }
snMspsStandbyStateChanges OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of changes to Standby connection active state."
::= { snMspsRingRedundancyStandby 5 }
snMspsStandbyResetCounters OBJECT-TYPE
SYNTAX INTEGER {
no-operation(1),
reset(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Reset all counters of Standby protocol software."
::= { snMspsRingRedundancyStandby 6 }
snMspsStandbyForceToMaster OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Force this device to Standby master."
::= { snMspsRingRedundancyStandby 7 }
snMspsStandbyStartDelay OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Time in [ms] that a standby master/slave will wait
before to enable its standby ports even if no standby
partner has been contacted yet.
If set to zero (default) master/slave do not enable
any standby port until being connected with the
partner standby slave/master"
::= { snMspsRingRedundancyStandby 12 }
snMspsStandbyBackoff OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "controls Standby device backoff mechanisms."
::= { snMspsRingRedundancyStandby 14 }
snMspsTrapStandbyActiveState NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"Standby manager entered active state."
::= { snMspsTrapPrefix 1501 }
snMspsTrapStandbyPassiveState NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"Standby manager entered passive state."
::= { snMspsTrapPrefix 1502 }
-- ----------------------------------------------------------------
-- MSPS REDUNDANCY EXT Group Objects
-- ----------------------------------------------------------------
-- ----------------------------------------------------------------
-- MSPS Component Objects: SN-MSPS-RR-EXT-MIB
-- ----------------------------------------------------------------
snMspsPassiveListeningEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable / Disable Passive Listening Functionality.
On enabled the device reacts on receiving a TCN (Topology Change Notifications) even (and only) if (R)STP is disabled."
DEFVAL {disabled}
::= { snMspsRedundancyExt 1 }
snMspsPassiveListeningBpduVlanFwd OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable / Disable Forwarding of BPDU in VLAN member ports when Passive Listening Functionality is enabled.
On enabled the device forwards the BPDU only on the VLAN member ports.
On disabled the device forwards on all the available ports in the system. "
DEFVAL {enabled}
::= { snMspsRedundancyExt 2 }
snMspsRmObserverMode OBJECT-TYPE
SYNTAX INTEGER {
disabled(2),
restart(3),
protect(4),
not-supported(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "RM Observer Mode."
::= { snMspsRingRedundancyObserver 1 }
snMspsRmObserverState OBJECT-TYPE
SYNTAX INTEGER {
rmObserverPassive(1),
rmObserverActive(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "RM Observer State."
::= { snMspsRingRedundancyObserver 2 }
snMspsLinkCheckPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsLinkCheckPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table containing per-port objects."
::= { snMspsLinkCheck 10 }
snMspsLinkCheckPortEntry OBJECT-TYPE
SYNTAX SnMspsLinkCheckPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Link Check per-port entry."
INDEX { snMspsLinkCheckPortIndex }
::= { snMspsLinkCheckPortTable 1 }
SnMspsLinkCheckPortEntry ::= SEQUENCE {
snMspsLinkCheckPortIndex InterfaceIndex,
snMspsLinkCheckPortAdminState INTEGER,
snMspsLinkCheckPortOperState INTEGER,
snMspsLinkCheckPortMode INTEGER,
snMspsLinkCheckPortAdvState INTEGER,
snMspsLinkCheckPortAdvReset INTEGER,
snMspsLinkCheckPortFramesIn Counter32,
snMspsLinkCheckPortFramesOut Counter32
}
snMspsLinkCheckPortIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "Port number of Link Check port."
::= { snMspsLinkCheckPortEntry 1 }
snMspsLinkCheckPortAdminState OBJECT-TYPE
SYNTAX INTEGER {
auto(1),
force-on(2),
force-off(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Link Check state to be used"
DEFVAL {3}
::= { snMspsLinkCheckPortEntry 2 }
snMspsLinkCheckPortOperState OBJECT-TYPE
SYNTAX INTEGER {
active(1),
not-active(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Link Check operating state"
DEFVAL {2}
::= { snMspsLinkCheckPortEntry 3 }
snMspsLinkCheckPortMode OBJECT-TYPE
SYNTAX INTEGER {
standard(1),
advanced(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "In advanced mode the port will be disabled after Link Check breakdown"
DEFVAL {1}
::= { snMspsLinkCheckPortEntry 6 }
snMspsLinkCheckPortAdvState OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
enabled(2),
running(3),
fault(4),
critical(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Port state in advanced mode"
::= { snMspsLinkCheckPortEntry 9 }
snMspsLinkCheckPortAdvReset OBJECT-TYPE
SYNTAX INTEGER {
no-action(1),
reset(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "resetting a port that has been disabled after Link Check advanced mode breakdown detection"
DEFVAL {1}
::= { snMspsLinkCheckPortEntry 12 }
snMspsLinkCheckPortFramesIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "number of received Link Check frames"
::= { snMspsLinkCheckPortEntry 15 }
snMspsLinkCheckPortFramesOut OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "number of sent Link Check frames"
::= { snMspsLinkCheckPortEntry 18 }
snMspsLinkCheckFrameLossStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsLinkCheckFrameLossStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table containing per-port, per-instance objects."
::= { snMspsLinkCheck 7 }
snMspsLinkCheckFrameLossStatsEntry OBJECT-TYPE
SYNTAX SnMspsLinkCheckFrameLossStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Link Check frame loss statistic per-port, per-instance entry."
INDEX { snMspsLinkCheckPortIndex,
snMspsFrameLossStatsInstance }
::= { snMspsLinkCheckFrameLossStatsTable 1 }
SnMspsLinkCheckFrameLossStatsEntry ::= SEQUENCE {
snMspsFrameLossStatsInstance INTEGER,
snMspsFrameLossStatsRating INTEGER,
snMspsFrameLossStatsInterval INTEGER,
snMspsFrameLossStatsThreshold INTEGER,
snMspsFrameLossStatsCurrentRate INTEGER
}
snMspsFrameLossStatsInstance OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Link Check frame loss statistics instance of port."
::= { snMspsLinkCheckFrameLossStatsEntry 2 }
snMspsFrameLossStatsRating OBJECT-TYPE
SYNTAX INTEGER {
none(1),
critical(2),
broken(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Rating of link state if threshold is exceeded."
::= { snMspsLinkCheckFrameLossStatsEntry 5 }
snMspsFrameLossStatsInterval OBJECT-TYPE
SYNTAX INTEGER (100..1000000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Interval [ms] of frame loss calculation."
::= { snMspsLinkCheckFrameLossStatsEntry 8 }
snMspsFrameLossStatsThreshold OBJECT-TYPE
SYNTAX INTEGER (0..1000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Frame loss rate threshold [per mill]."
::= { snMspsLinkCheckFrameLossStatsEntry 11 }
snMspsFrameLossStatsCurrentRate OBJECT-TYPE
SYNTAX INTEGER (0..1000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Current frame loss rate [per mill]."
::= { snMspsLinkCheckFrameLossStatsEntry 14 }
snMspsLinkCheckPacketErrStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsLinkCheckPacketErrStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table containing per-port, per-type objects."
::= { snMspsLinkCheck 9 }
snMspsLinkCheckPacketErrStatsEntry OBJECT-TYPE
SYNTAX SnMspsLinkCheckPacketErrStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Packet errors statistic per-type entry"
INDEX { snMspsLinkCheckPortIndex,
snMspsPacketErrStatsType }
::= { snMspsLinkCheckPacketErrStatsTable 1 }
SnMspsLinkCheckPacketErrStatsEntry ::= SEQUENCE {
snMspsPacketErrStatsType INTEGER,
snMspsPacketErrStatsRating INTEGER,
snMspsPacketErrStatsThreshold Counter32,
snMspsPacketErrStatsIncrease Counter32
}
snMspsPacketErrStatsType OBJECT-TYPE
SYNTAX INTEGER {
crc(1),
undersize(2),
oversize(3),
fragment(4),
jabber(5),
collision(6)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Packet error type."
::= { snMspsLinkCheckPacketErrStatsEntry 3 }
snMspsPacketErrStatsRating OBJECT-TYPE
SYNTAX INTEGER {
none(1),
critical(2),
broken(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Rating of link state if threshold is exceeded."
::= { snMspsLinkCheckPacketErrStatsEntry 6 }
snMspsPacketErrStatsThreshold OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Packet error increase threshold."
::= { snMspsLinkCheckPacketErrStatsEntry 9 }
snMspsPacketErrStatsIncrease OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Packet error increase since Link Check state is 'running'."
::= { snMspsLinkCheckPacketErrStatsEntry 12 }
-- -------------------------------------------------------------
-- SNMPv2 Notifications
-- -------------------------------------------------------------
snTrapMspsLinkCheckBrokenLinkDetected NOTIFICATION-TYPE
OBJECTS { snMspsLinkCheckPortIndex }
STATUS current
DESCRIPTION "Link Check disabled port because of broken link."
::= { snMspsTrapPrefix 2901 }
snTrapMspsLinkCheckPortEnabled NOTIFICATION-TYPE
OBJECTS { snMspsLinkCheckPortIndex }
STATUS current
DESCRIPTION "By Link Check disabled port is enabled again."
::= { snMspsTrapPrefix 2902 }
snTrapMspsLinkCheckMultiplePartners NOTIFICATION-TYPE
OBJECTS { snMspsLinkCheckPortIndex }
STATUS current
DESCRIPTION "Link Check detected multiple partners on port."
::= { snMspsTrapPrefix 2903 }
snTrapMspsLinkCheckMultiplePartnersReset NOTIFICATION-TYPE
OBJECTS { snMspsLinkCheckPortIndex }
STATUS current
DESCRIPTION "Link Check partner detection reset on port."
::= { snMspsTrapPrefix 2904 }
snTrapMspsLinkCheckCriticalLinkDetected NOTIFICATION-TYPE
OBJECTS { snMspsLinkCheckPortIndex }
STATUS current
DESCRIPTION "Link Check indicates critical link state on port."
::= { snMspsTrapPrefix 2905 }
snTrapMspsLinkCheckCriticalLinkReset NOTIFICATION-TYPE
OBJECTS { snMspsLinkCheckPortIndex }
STATUS current
DESCRIPTION "By Link Check indicated critical link state reset on port."
::= { snMspsTrapPrefix 2906 }
snTrapMspsLinkCheckUnapprovedConfigDetected NOTIFICATION-TYPE
OBJECTS { snMspsLinkCheckPortIndex }
STATUS current
DESCRIPTION "Unapproved Link Check configuration. Disable Link Check on this port."
::= { snMspsTrapPrefix 2907 }
snTrapMspsLinkCheckUnapprovedConfigResolved NOTIFICATION-TYPE
OBJECTS { snMspsLinkCheckPortIndex }
STATUS current
DESCRIPTION "Unapproved Link Check configuration resolved on this port."
::= { snMspsTrapPrefix 2908 }
-- ***********************************************************************
-- Objects of the Media redundancy Interconnection
-- ***********************************************************************
snMspsMrpInterconStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "MRP Interconnection protocol status.
If set to disabled(2), all configured entries of the MRP Interconnection
table are set out of sevice, despite the mode and the admin role.
If set to enabled(1), all configured entries are put into operation,
depending on the mode and the admin role.
"
::= { snMspsRingRedundancyMrpIntercon 1 }
snMspsMrpInterconResetCounters OBJECT-TYPE
SYNTAX INTEGER {
no-operation(1),
reset(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Reset all counters of MRP Interconnection protocol software.
This object is not persistent.
"
::= { snMspsRingRedundancyMrpIntercon 2 }
snMspsMrpInterconTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsMrpInterconEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Every entry in this table contains information about
a Media redundancy Interconnection domain.
"
::= { snMspsRingRedundancyMrpIntercon 10 }
snMspsMrpInterconEntry OBJECT-TYPE
SYNTAX SnMspsMrpInterconEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry in the snMspsMrpInterconTable.
"
INDEX { snMspsMrpInterconIndex }
::= { snMspsMrpInterconTable 1 }
SnMspsMrpInterconEntry::= SEQUENCE {
snMspsMrpInterconIndex Unsigned32,
snMspsMrpInterconDomainID Unsigned32,
snMspsMrpInterconDomainName DisplayString,
snMspsMrpInterconPort Integer32,
snMspsMrpInterconPortState INTEGER,
snMspsMrpInterconMode INTEGER,
snMspsMrpInterconAdminRole INTEGER,
snMspsMrpInterconOperRole INTEGER,
snMspsMrpInterconState INTEGER,
snMspsMrpInterconOpenCount Counter32,
snMspsMrpInterconLastOpenChange TimeTicks,
snMspsMrpInterconPeerMAC OCTET STRING,
snMspsMrpInterconAdminMICPosition INTEGER,
snMspsMrpInterconOperMICPosition INTEGER,
snMspsMrpInterconLinkCheckProfile INTEGER,
snMspsMrpInterconStartDelay INTEGER,
snMspsMrpInterconRowStatus RowStatus
}
snMspsMrpInterconIndex OBJECT-TYPE
SYNTAX Unsigned32(1..64)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The index of the entry
"
::= { snMspsMrpInterconEntry 1 }
snMspsMrpInterconDomainID OBJECT-TYPE
SYNTAX Unsigned32(0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "An identifier of the Media redundancy Interconnection domain
which represents an Interconnection topology.
A value of 0 (invalid) indicates that no ID is given yet.
"
::= { snMspsMrpInterconEntry 2 }
snMspsMrpInterconDomainName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..240))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "A logical name for the Media redundancy Interconnection domain to
ease the management of Media redundancy Interconnection domains.
"
::= { snMspsMrpInterconEntry 3 }
snMspsMrpInterconPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The ifIndex of the layer 2 interface which is used
as interconnection port.
A value of 0 (invalid) indicates that no interface is selected yet.
"
::= { snMspsMrpInterconEntry 4 }
snMspsMrpInterconPortState OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
blocked(2),
forwarding(3),
notConnected(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Operational state of the Interconnection port.
disabled(1) indicates that all frames are dropped.
blocked(2) indicates that all frames are dropped except
- MRP Interconnection topology change frames,
- MRP Interconnection test frames,
- MRP Interconnection link change frames,
- MRP Interconnection link status poll frames,
- frames from other protocols that also define to pass
blocked(2) ports.
forwarding(3) indicates that all frames are passed through
according to the forwarding behavior of IEEE 802.1D.
notConnected(4) indicates that the port has no link.
"
::= { snMspsMrpInterconEntry 5 }
-- { snMspsMrpInterconEntry 6 } reserved for future use as VLAN ID
snMspsMrpInterconMode OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
undefined(1),
lcMode(2),
rcMode(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Control the MRP Interconnection mode.
The value disable(0) is used to set the entry persistent
out of service (the corresponding row status has to be set)
without losing the primary configuration (mainly admin role).
In this case, the MRP Interconnection entity of this domain
shall be disabled as is with admin role disable(0).
The value undefined(1) signals that the interconnection mode is
not disable(0) and neither set to lcMode(2) nor to rcMode(3).
If the value is set to lcMode(2) the devices in Media redundancy
Interconnection Manager (MIM) role as well as these in Media
redundancy Interconnection Client role (MIC) are using the link
check mode to detect open or closed interconnection links.
If the value is set to rcMode(3) the device in Media redundancy
Interconnection Manager (MIM) role is using the ring check mode to
detect open or closed interconnection links.
The factory settings are recommended to adjust the
value of this object to the lcMode(2) capability.
If the agent restricts the write access, no matter what
reason, it shall reject write requests by responding
with 'badValue'.
"
::= { snMspsMrpInterconEntry 7 }
snMspsMrpInterconAdminRole OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
client(1),
manager(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Control the MRP Interconnection behavior of the system per
Media redundancy Interconnection domain.
If the value is set to disable(0) the MRP Interconnection
entity of this domain shall be disabled.
If the value is set to client(1) the entity shall be set
to the role of a Media redundancy Interconnection Client (MIC).
If the value is set to manager(2) the entity shall be set
to the role of a Media redundancy Interconnection Manager (MIM).
The factory settings are recommended to adjust the
value of this object to the client(1) capability of the
component in order to prevent multiple managers are
in the interconnection (the order of the capabilities are not
necessarily conform to the order of the object values here).
If the agent restricts the write access, no matter what
reason, it shall reject write requests by responding
with 'badValue'.
"
::= { snMspsMrpInterconEntry 8 }
snMspsMrpInterconOperRole OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
client(1),
manager(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The operational role of an MRP Interconnection entity
per Media redundancy Interconnection domain.
A value of disable(0) signals that the entity doesn't
work (whatever reason).
A value of client(1) signals that the entity is in a
Media redundancy Interconnection Client role.
A value of manager(2) signals that the entity is the
manager of this Media redundancy Interconnection domain.
"
::= { snMspsMrpInterconEntry 9 }
snMspsMrpInterconState OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
undefined(1),
interconnOpen(2),
interconnClosed(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Operational status of a MIM of the MRP Interconnection entity.
disable(0) <20> The entity is disabled.
undefined(1) <20> Value is not valid.
interconnOpen(2) <20> MRP Interconnection redundancy lost of this Media
redundancy Interconnection domain.
interconnClosed(3) <20> MRP Interconnection redundancy available of this Media
redundancy Interconnection domain.
"
::= { snMspsMrpInterconEntry 10 }
-- { snMspsMrpInterconEntry 11 } reserved for future use as configuration status
snMspsMrpInterconOpenCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Counter for MRP Interconnection state changes to interconnOpen.
"
::= { snMspsMrpInterconEntry 12 }
snMspsMrpInterconLastOpenChange OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Timeticks since last change of snMspsMrpInterconState to interconnOpen.
"
::= { snMspsMrpInterconEntry 13 }
snMspsMrpInterconPeerMAC OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Device-MAC-Address of the devices interconnection peer, connected
to the devices interlink port.
This variable contains the MAC-Address contained in the media link
check frame received at the interconnection port.
"
::= { snMspsMrpInterconEntry 14 }
-- { snMspsMrpInterconEntry 15 } reserved for future use as own MRM MAC address
-- { snMspsMrpInterconEntry 16 } reserved for future use as coupled ring MRM MAC address
-- { snMspsMrpInterconEntry 17 } reserved for future use as coupled ring MRP domain UUID
snMspsMrpInterconAdminMICPosition OBJECT-TYPE
SYNTAX INTEGER {
primary(0),
secondary(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Controls the MRP Interconnection Client position
in the interconnection setup.
If the value is set to primary(0) the MRP Interconnection Client
is a primary MRP Interconnection Client.
If the value is set to secondary(1) the MRP Interconnection Client
is the secondary MRP Interconnection Client.
"
::= { snMspsMrpInterconEntry 18 }
snMspsMrpInterconOperMICPosition OBJECT-TYPE
SYNTAX INTEGER {
primary(0),
secondary(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Reads the MRP Interconnection Client position
in the interconnection setup.
If the value is set to primary(0) the MRP Interconnection Client
is a primary MRP Interconnection Client.
If the value is set to secondary(1) the MRP Interconnection Client
is the secondary MRP Interconnection Client.
"
::= { snMspsMrpInterconEntry 19 }
snMspsMrpInterconLinkCheckProfile OBJECT-TYPE
SYNTAX INTEGER {
undefined(0),
primary-default(1),
secondary-default(2),
secondary-high(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Controls the link check sensibility (check frame send interval
and thus link check frame load) of the MRP Interconnection links.
undefined(0) - link check profile not set.
primary_default(1) - 10ms on primary MRP Interconnection link.
secondary_default(2) - 1000ms on secondary MRP Interconnection link.
secondary_high(4) - 10ms on secondary MRP Interconnection link.
"
::= { snMspsMrpInterconEntry 28 }
snMspsMrpInterconStartDelay OBJECT-TYPE
SYNTAX INTEGER(0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Time in [100 ms] that an MRP Interconnection manager/client
will wait before to enable the MRP Interconnection port
even if the MRP Interconnection ring coupling configuration
is not complete.
The maximum value of 65535 (0xFFFF) means indefinite waiting.
Some values are reserved and/or differ in meaning/usage, see below.
---------------------+----------------------------+-------------------------
Value (hexadecimal) | Meaning | Usage
---------------------+----------------------------+-------------------------
0x0000 | Reserved | -
0x0001 | Value <20> 100 ms = 100 ms | Optional Startup delay
0x0002 | Value <20> 100 ms = 200 ms | Mandatory Startup delay
0x0003 - 0xEA60 | Value <20> 100 ms | Optional Startup delay
0xEA61 - 0xFFFE | Reserved | -
0xFFFF | Wait infinite time | Optional Startup delay
---------------------+----------------------------+-------------------------
"
::= { snMspsMrpInterconEntry 29 }
snMspsMrpInterconRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Support of creation and deletion of rows.
A row can be taken out of service by writing
the value notInService(2).
"
::= { snMspsMrpInterconEntry 30 }
-- -------------------------------------------------------------
-- SNMPv2 Notifications
-- -------------------------------------------------------------
snMspsTrapMrpInterconMgrOpenState NOTIFICATION-TYPE
OBJECTS { snMspsMrpInterconIndex }
STATUS current
DESCRIPTION "MRP Interconnection state change to open."
::= { snMspsTrapPrefix 3001 }
snMspsTrapMrpInterconMgrClosedState NOTIFICATION-TYPE
OBJECTS { snMspsMrpInterconIndex }
STATUS current
DESCRIPTION "MRP Interconnection state change to closed."
::= { snMspsTrapPrefix 3002 }
snMspsDualNetAccessScalars OBJECT IDENTIFIER ::= { snMspsDualNetAccess 1 }
-- --------------------------------------------------------------
-- Dual Network Access Scalar Objects
-- --------------------------------------------------------------
snMspsDualNetAccessAdminMode OBJECT-TYPE
SYNTAX INTEGER {
standalone (0),
manager (1),
client (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Configured Admin mode for the Dual Network Access Module.
The value standalone (0) is used to disable the feature.
The value manager (1) is used make the role as manager
for the dual network access redundant links.
The value client(2) is used make the role as client for
for the Dual network access redundant links"
DEFVAL { standalone }
::= { snMspsDualNetAccessScalars 1 }
snMspsDualNetAccessOperMode OBJECT-TYPE
SYNTAX INTEGER {
standalone (0),
manager (1),
client (2),
mismatch (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Operational mode for the Dual Network Access (DNA)Module.
The mode standalone (0) is used to disable the feature.
when the value is standalone, the port role for the dual network
access links are not controlled by this DNA Module.
If both admin and oper mode are manager, then the port role for
the dual network access links will be forwarding.
If both admin and oper mode are client, then the port role for
the dual network access links will be discarding or forwarding,
depending on reachability to the MRP Manager in the ring.
If oper mode state is mismatch for DNA admin mode manager, then
port state for DNA links will be discarding.
If oper mode state is mismatch for DNA admin mode client, then
port state for DNA links will be forwarding.
The oper state moves to mismatch in the following conditions,
a) if ring redundancy is disabled and admin mode for DNA is
manager or client.
b) if ring redundancy admin mode is not MRP Manager(Auto or Norm)
and DNA admin mode is manager
c) if ring redundancy admin mode is not MRP Client
and DNA admin mode is client
d) if ring redundancy oper mode (manager/client) is not matching
with DNA admin mode (manager/client).
The oper state for DNA moves out of mismatch state, When the
mismatch between ring redundancy and DNA are resolved."
::= { snMspsDualNetAccessScalars 2 }
snMspsDualNetAccessForwardLinks OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The List of Dual Network Access links in the forwarding state and are controlled
by this DNA Module."
::= { snMspsDualNetAccessScalars 3 }
snMspsDualNetAccessBlockedLinks OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The List of Dual Network Access links in the discarding state and are controlled
by this DNA Module."
::= { snMspsDualNetAccessScalars 4 }
-- ----------------------------------------------------------------
-- MSPS DHCP Group Objects
-- ----------------------------------------------------------------
-- ----------------------------------------------------------------
-- MSPS Component Objects: DHCP CLIENT MIB
-- ----------------------------------------------------------------
snMspsDhcpClientControl OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value enabled(1) will run DHCP Client.
The value disabled(2) will inhibit DHCP."
DEFVAL {1}
::= { snMspsDhcpClient 1 }
snMspsDhcpClientMode OBJECT-TYPE
SYNTAX INTEGER {
enabled-via-mac-address (1),
enabled-via-client-id (2),
enabled-via-sysname (3),
enabled-via-nameofstation (4),
enabled-via-iaidandduid (5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value enabled-via-mac-address(1)
sets DHCP Client Mode with option
MAC Address as ClientId,
enabled-via-client-id(2) runs DHCP Client Mode
with option ClientId,
enabled-via-sysname(3) runs DHCP Client with
the sysname as ClientId,
enabled-via-nameofstation(4) runs DHCP with
the name of station as ClientId,
enabled-via-iaidandduid(5) runs DHCP with RFC 3315 style
identifier binding as client identifier. DUID type is
determined by snMspsDhcpClientIfDuidType object."
DEFVAL {1}
::= { snMspsDhcpClient 2 }
snMspsDhcpClientConfigFileRequest OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "If enabled(1) DHCP client requests option 66/67 ."
DEFVAL {1}
::= { snMspsDhcpClient 3 }
snMspsDhcpClientId OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..254))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "An administratively-assigned name
for this DHCP client."
DEFVAL {"default"}
::= { snMspsDhcpClient 4 }
snMspsDhcpClientIPAddrKeepAlive OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "If enabled (1) DHCP client will retain the ip address from server
accordingly to MSPS requirements.
If disabled(2) DHCP client reset the ip address to 0.0.0.0
accordingly to RFC."
::= { snMspsDhcpClient 5 }
-- DUID Group ------------------------------------------------------
snMspsDhcpClientDUID OBJECT IDENTIFIER ::= { snMspsDhcpClient 10 }
SnMspsDhcpClientDuidType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A DUID consists of a two-octet type code represented in network byte
order, followed by a variable number of octets that make up the
actual identifier. The following types are currently defined:
1 Link-layer address plus time
2 Vendor-assigned unique ID based on Enterprise Number
3 Link-layer address
DUID Based on Link-layer Address plus Time [DUID-LLT]
This type of DUID consists of a two octet type field containing the
value 1, a two octet hardware type code, four octets containing a
time value, followed by link-layer address of any one network
interface that is connected to the DHCP device at the time
that the DUID is generated. The time value is the time that the
DUID is generated represented in seconds since midnight
(UTC), January 1, 2000, modulo 2^32.
The following diagram illustrates the format of a DUID-LLT:
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| 1 | hardware type (16 bits) |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| time (32 bits) |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
. .
. link-layer address (variable length) .
. .
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
The choice of network interface can be completely arbitrary, as long
as that interface provides a globally unique link-layer address for
the link type, and the same DUID-LLT SHOULD be used in configuring
all network interfaces connected to the device, regardless of which
interface's link-layer address was used to generate the DUID-LLT.
Clients and servers using this type of DUID MUST store the
DUID-LLT in stable storage, and MUST continue to use this DUID-LLT even
if the network interface used to generate the DUID-LLT is removed.
Clients and servers that do not have any stable storage MUST NOT
use this type of DUID.
Clients and servers that use this DUID SHOULD attempt to configure
the time prior to generating the DUID, if that is possible, and MUST
use some sort of time source (for example, a real-time clock) in
generating the DUID, even if that time source could not be configured
prior to generating the DUID. The use of a time source makes it
unlikely that two identical DUID-LLTs will be generated if the
network interface is removed from the client and another client then
uses the same network interface to generate a DUID-LLT. A collision
between two DUID-LLTs is very unlikely even if the clocks have not
been configured prior to generating the DUID.
This method of DUID generation is recommended for all general purpose
computing devices such as desktop computers and laptop computers, and
also for devices such as printers, routers, and so on, that contain
some form of writable non-volatile storage.
DUID Assigned by Vendor Based on Enterprise Number [DUID-EN]
This form of DUID is assigned by the vendor to the device. It
consists of the vendor's registered Private Enterprise Number as
maintained by IANA [6] followed by a unique identifier assigned by
the vendor.
The following diagram summarizes the structure of a DUID-EN:
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| 2 | enterprise-number |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| enterprise-number (contd) | |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ |
. identifier .
. (variable length) .
. .
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
The source of the identifier is left up to the vendor defining it,
but each identifier part of each DUID-EN MUST be unique to the
device that is using it, and MUST be assigned to the device at the time
it is manufactured and stored in some form of non-volatile
storage. The generated DUID SHOULD be recorded in non-erasable storage.
DUID Based on Link-layer Address [DUID-LL]:-
This type of DUID consists of two octets containing the DUID type 3,
a two octet network hardware type code, followed by the link-layer
address of any one network interface that is permanently connected to
the client or server device.
The following diagram illustrates the format of a DUID-LL:
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| 3 | hardware type (16 bits) |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
. .
. link-layer address (variable length) .
. .
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
The choice of network interface can be completely arbitrary, as long
as that interface provides a unique link-layer address and is
permanently attached to the device on which the DUID-LL is being
generated. The same DUID-LL SHOULD be used in configuring all
network interfaces connected to the device, regardless of which
interface's link-layer address was used to generate the DUID.
DUID-LL is recommended for devices that have a permanently-connected
network interface with a link-layer address, and do not have
nonvolatile, writable stable storage. DUID-LL MUST NOT be used by
DHCP clients or servers that cannot tell whether or not a network
interface is permanently attached to the device on which the DHCP
client is running."
REFERENCE
"Section 9. DHCP Unique Identifier (DUID) RFC 3315"
SYNTAX INTEGER {
dtLlt (1),
dtEn (2),
dtLl (3)
}
SnMspsDhcpClientDuidValue ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Each DHCP client has a unique DUID. DHCP servers use DUIDs to identify
clients for the selection of configuration parameters and in the
association of IAs with clients. DHCP clients use DUIDs to Identify
a client in messages where a client needs to be identified.
Clients MUST treat DUIDs as opaque values and MUST only compare DUIDs
for equality Clients and servers MUST NOT in any Other way interpret
DUIDs. The DUID is carried in an option because it may be variable length
and because it is not required in all DHCP messages. The DUID is
designed to be unique across all DHCP clients and servers, and stable
for any specific client or server - that is, the DUID used by a client
or server SHOULD NOT change over time if at all possible; for example,
a device's DUID should not change as a result of a change in
the device's network hardware.
The motivation for having more than one type of DUID is that the DUID
must be globally unique, and must also be easy to generate. The sort of
globally-unique identifier that is easy to generate for any given device
can differ quite widely. Also, some devices may not contain any
persistent storage. Retaining a generated DUID in such a device is not
possible, so the DUID scheme must accommodate such devices. A DUID can be
no more than 130(including the type code) octets long."
REFERENCE
"Section 9. DHCP Unique Identifier (DUID) RFC 3315"
SYNTAX OCTET STRING (SIZE(1..130))
snMspsDhcpClientDuidType OBJECT-TYPE
SYNTAX SnMspsDhcpClientDuidType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This Object contains the type of DUID. Client sends the Client Identifier
TLV in the client sending messages.
The value dtLlt(1) indicates that DHCP client will use the Link layer address
of the interface and Current System time value for the Client Identifier
option TLV value.
The value dtEn (2) indicates that DHCP client will use the Vendor-assigned
unique ID based on Enterprise Number for the Client Identifier
option TLV value.
The value dtLl (3) indicates that DHCP client will use the link layer address
for the client Identifier option TLV value."
DEFVAL { dtLlt }
::= { snMspsDhcpClientDUID 1 }
snMspsDhcpClientDuidLltValue OBJECT-TYPE
SYNTAX SnMspsDhcpClientDuidValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This Object contains the value of Link-layer Address plus Time DUID. This DUID value is used by client if dtLlt is selected in snMspsDhcpClientDuidType."
::= { snMspsDhcpClientDUID 2 }
snMspsDhcpClientDuidEnValue OBJECT-TYPE
SYNTAX SnMspsDhcpClientDuidValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the value of vendor-assigned unique ID based on Enterprise Number DUID. This DUID value is used by client if dtEn is selected in snMspsDhcpClientDuidType."
::= { snMspsDhcpClientDUID 3 }
snMspsDhcpClientDuidLlValue OBJECT-TYPE
SYNTAX SnMspsDhcpClientDuidValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This Object contains the value of Link-layer address DUID. This DUID value is used by client if dtLl is selected in snMspsDhcpClientDuidType."
::= { snMspsDhcpClientDUID 4 }
snMspsDhcpClientDuidConfigStatus OBJECT-TYPE
SYNTAX INTEGER(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is used to identify duid values are auto generated or manually configured.
0x00 -- All(dtLlt,dtEn,dtLl) duid types are auto generated.
0x01 -- dtLlt manually configured.
0x02 -- dtEn manually configured.
0x03 -- dtLlt and dtEn manually configured.
0x04 -- dtLl manually configured.
0x05 -- dtLlt and dtLl manually configured.
0x06 -- dtEn and dtLl manually configured.
0x07 -- dtLlt,dtEn and dtLl manually configured."
DEFVAL { 0 }
::= { snMspsDhcpClientDUID 5 }
--- snMspsDhcpClientOptTable START
snMspsDhcpClientOptTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDhcpClientOptEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" The dhcp options which are to be requested to server
will be added as entries in this table.
While sending out discover message, the options entries
which are avilable in this table will be added with
discover message.
The option values which are received via dhcp ack
packet will be stored in this table."
::= { snMspsDhcpClient 15 }
snMspsDhcpClientOptEntry OBJECT-TYPE
SYNTAX SnMspsDhcpClientOptEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing requested dhcp options and its values
at a particular interface."
INDEX { snMspsDhcpClientOptIfIndex, snMspsDhcpClientOptType }
::= { snMspsDhcpClientOptTable 1 }
SnMspsDhcpClientOptEntry ::=
SEQUENCE {
snMspsDhcpClientOptIfIndex InterfaceIndex,
snMspsDhcpClientOptType Integer32,
snMspsDhcpClientOptLen Integer32,
snMspsDhcpClientOptVal OCTET STRING,
snMspsDhcpClientOptRowStatus RowStatus
}
snMspsDhcpClientOptIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A unique identifier for each interface.
This object is identical to the ifIndex
of the standard MIB-2 ifTable."
::= { snMspsDhcpClientOptEntry 1 }
snMspsDhcpClientOptType OBJECT-TYPE
SYNTAX Integer32 (1..254)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The object identifies the option, this is the
tag octet of the DHCP option. This option is
one of the index in the snMspsDhcpClientOptTable.
Option 0 denotes padding. Option 255 denotes
end of option field. Other options can be
requested from client to server."
::= { snMspsDhcpClientOptEntry 2 }
snMspsDhcpClientOptLen OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the length of the DHCP Client Option.
This length does not include the two octets
specifiying the tag and length.
This object has read-write support only for option 60."
::= { snMspsDhcpClientOptEntry 3 }
snMspsDhcpClientOptVal OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the octets of data, for the length
specified by snMspsDhcpClientOptLen.
This object has read-write support only for option 60.
This value is taken from DHCP ACK message
sent from server to client."
::= { snMspsDhcpClientOptEntry 4 }
snMspsDhcpClientOptRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The RowStatus variable is for addition and deletion
of snMspsDhcpClientOptEntry."
::= { snMspsDhcpClientOptEntry 5 }
--- snMspsDhcpClientOptTable END
snMspsDhcpRelaying OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Only when enabled, the Relay Agent shall become active."
DEFVAL { disable }
::= { snMspsDhcpRelay 1 }
snMspsDhcpRelayServersOnly OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When enabled, the Relay Agent shall forward the
packets from the client to a specific DHCP server."
DEFVAL { disable }
::= { snMspsDhcpRelay 2 }
snMspsDhcpRelaySecsThreshold OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IF the secs field in the DHCP message is greater than the
snMspsDhcpRelaySecsThreshold, Packet get dropped at the Relay Agent"
DEFVAL { 0 }
::= { snMspsDhcpRelay 3 }
snMspsDhcpRelayHopsThreshold OBJECT-TYPE
SYNTAX Integer32 (0..16)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A maximum hop count,a relay agent allow to pass through it.If
the HopCount in the Dhcp Message is greater than the snMspsDhcpRelayHopsThreshold,
Packet get dropped at the Relay Agent "
DEFVAL { 4 }
::= { snMspsDhcpRelay 4 }
snMspsDhcpRelayRAIOptionControl OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Only when enabled, the Relay Agent shall do any processing
related to Relay Agent Information Options - like
inserting the necessary options while relaying a packet
from a client to a server and examining/stripping of
options when relaying a packet from a server to a
client."
DEFVAL { disable }
::= { snMspsDhcpRelay 5 }
snMspsDhcpRelayRAICircuitIDSubOptionControl OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When enabled, if the RAIOption is globally enabled,
then the Relay Agent shall insert the CircuitID sub-option,
when necessary, while relaying packets from a client
to server and also examines/strips off this sub-option
while relaying packets from a server to a client."
DEFVAL { disable }
::= { snMspsDhcpRelay 6 }
snMspsDhcpRelayRAIRemoteIDSubOptionControl OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When enabled, if the RAIOption is globally enabled,
then the Relay Agent shall insert the RemoteID sub-option,
when necessary, while relaying packets from a client
to server and also examines/strips off this sub-option
while relaying packets from a server to a client."
DEFVAL { disable }
::= { snMspsDhcpRelay 7 }
snMspsDhcpRelayRAISubnetMaskSubOptionControl OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When enabled, if the RAIOption is globally enabled,
then the Relay Agent shall insert the Subnet Mask sub-option,
when necessary, while relaying packets from a client
to server and also examines/strips off this sub-option
while relaying packets from a server to a client."
DEFVAL { disable }
::= { snMspsDhcpRelay 8 }
snMspsDhcpRelayRAIAddressFieldActivated OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables Relay Agent Information (RAI) Address Field on the Relay Agent."
DEFVAL { false }
::= { snMspsDhcpRelay 9 }
snMspsDhcpRelayRAIAddressFieldInterface OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Relay Agent insert the gi address field using
ip address of the given interface.
The value of this MIB object will only be considered
if 'snMspsDhcpRelayRAIAddressFieldActivated' is true."
::= { snMspsDhcpRelay 10 }
-- snMspsDhcpRelay 11-15 reserved
snMspsDhcpConfigDhcpCircuitOption OBJECT-TYPE
SYNTAX BITS {
routerindex(0), -- Router Interfce Index
vlanid(1), -- vlanId
recvport(2) -- port or lag port
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This Object defines the type of information to be present in circuit id
sub-option.And this option can specfied only if
CircuitIDSubOptionControl is enabled.It is possible to set more than
one bit at a time.Currently first three bits are used and remaning bits are reserved for future purpose"
::= { snMspsDhcpRelay 16 }
--IPADDRESS_TABLE_BEGIN
snMspsDhcpRelaySrvAddressTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDhcpRelaySrvAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the IP addresses of the DHCP Server
to which the Relay Agent needs to forward the packets from
the client. This object becomes active only when
snMspsDhcpRelayServersOnly is enabled."
::= { snMspsDhcpRelay 17 }
snMspsDhcpRelaySrvAddressEntry OBJECT-TYPE
SYNTAX SnMspsDhcpRelaySrvAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
INDEX { snMspsDhcpRelaySrvIpAddress }
::= { snMspsDhcpRelaySrvAddressTable 1 }
SnMspsDhcpRelaySrvAddressEntry ::=
SEQUENCE {
snMspsDhcpRelaySrvIpAddress IpAddress,
snMspsDhcpRelaySrvAddressRowStatus RowStatus
}
snMspsDhcpRelaySrvIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP Address of the DHCP server."
::= { snMspsDhcpRelaySrvAddressEntry 1 }
snMspsDhcpRelaySrvAddressRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"RowStatus of this entry."
::= { snMspsDhcpRelaySrvAddressEntry 2 }
--IPADDRESS_TABLE_END
--INTERFACE_TABLE_BEGIN
snMspsDhcpRelayIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDhcpRelayIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table holds the circuit id SubOption configured over the
interface.This option will be inserted for dhcp request packets
received on this interface based on the status of
snMspsDhcpRelayRAICircuitIDSubOptionControl.Using this table,the dhcp
broadcast response is sent on the appropriate interface over which
the broadcast dhcp request was received."
::= { snMspsDhcpRelay 18 }
snMspsDhcpRelayIfEntry OBJECT-TYPE
SYNTAX SnMspsDhcpRelayIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Contains configured dhcp relay information suboptions"
INDEX { ifIndex }
::= { snMspsDhcpRelayIfTable 1 }
SnMspsDhcpRelayIfEntry ::=
SEQUENCE {
snMspsDhcpRelayIfCircuitId Unsigned32,
snMspsDhcpRelayIfRemoteId DisplayString,
snMspsDhcpRelayIfRowStatus RowStatus,
snMspsDhcpRelayIfRemoteIdSource INTEGER
}
snMspsDhcpRelayIfCircuitId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Circuit Id value configured over this interface.Values other than
interface indices can be configured for this object.Configuring
with zero value will reset the circuit id configuration for this
interface.Circuit id will be inserted to dhcp request packet received
on this interface if snMspsDhcpRelayRAICircuitIDSubOptionControl is enabled"
::= { snMspsDhcpRelayIfEntry 1 }
snMspsDhcpRelayIfRemoteId OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Remote Id value configured over this interface.String of length zero
will reset the configuration.Value other than XYZ (which is the
considered as default value internally) can be configured for this
object.Remote ID will be inserted to dhcp request packet received
on this interface if snMspsDhcpRelayRAIRemoteIDSubOptionControl is enabled"
::= { snMspsDhcpRelayIfEntry 2 }
snMspsDhcpRelayIfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Row status of this table"
::= { snMspsDhcpRelayIfEntry 3 }
snMspsDhcpRelayIfRemoteIdSource OBJECT-TYPE
SYNTAX INTEGER {
freetext (1),
macaddress (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When freetext is selected, the value of snMspsDhcpRelayIfRemoteId will be taken into consideration as the Remote Id.
When macaddress is selected, MAC address of the interface will be taken into consideration as the Remote Id."
DEFVAL { freetext }
::= { snMspsDhcpRelayIfEntry 4 }
--INTERFACE_TABLE_END
snMspsDhcpRelayRemoteId OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string based Remote ID value assigned by DHCP relay agent which uniquely identifies the client."
::= { snMspsDhcpRelay 19 }
-- ----------------------
-- snMspsDhcpServer.mib
--
-- SIEMENS AG
-- Industry Automation Division
--
-- object definitions for the management of a DHCP server implementation
--
-- Copyright (c) 2013 Siemens AG
-- All rights reserved.
-- ----------------------------------------------------------------------
--
-- MIB Module : SN-MSPS-DHCP-SERVER-MIB
--
-- Revision : V0.0.0.4
-- Date : 2018/02/26
--
-- ----------------------------------------------------------------------
snMspsDhcpServerObjects OBJECT-IDENTITY
STATUS current
DESCRIPTION
"The MIB objects in this group define the Management Information Base
for a Dynamic Host Configuration Protocol (DHCP) server implementation."
::= { snMspsDhcpServer 1 }
snMspsDhcpV4ServerObjects OBJECT-IDENTITY
STATUS current
DESCRIPTION
"The MIB objects in this group define the Management Information Base
for a Dynamic Host Configuration Protocol (DHCP) server implementation."
::= { snMspsDhcpServerObjects 4 }
snMspsDhcpV4SrvConfig OBJECT-IDENTITY
STATUS current
DESCRIPTION
"The MIB objects in this group define the Management Information Base
objects with systemic scope."
::= { snMspsDhcpV4ServerObjects 1 }
snMspsDhcpV4SrvActivated OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is a control variable.
It is written by the remote management entity.
global DHCP server enable/disable flag."
::= { snMspsDhcpV4SrvConfig 1 }
snMspsDhcpV4SrvIcmpEchoProbeActivated OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is a control variable.
It is written by the remote management entity.
When set to to true, the DHCP server will probe an IP address whether it
is already in use before offering it to a DHCP client."
::= { snMspsDhcpV4SrvConfig 2 }
snMspsDhcpV4SrvSubnetPoolTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDhcpV4SrvSubnetPoolEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
::= { snMspsDhcpV4ServerObjects 2 }
snMspsDhcpV4SrvSubnetPoolEntry OBJECT-TYPE
SYNTAX SnMspsDhcpV4SrvSubnetPoolEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { snMspsDhcpV4SrvSubnetPoolIndex }
::= { snMspsDhcpV4SrvSubnetPoolTable 1 }
SnMspsDhcpV4SrvSubnetPoolEntry ::= SEQUENCE {
snMspsDhcpV4SrvSubnetPoolIndex Unsigned32,
snMspsDhcpV4SrvSubnetPoolIfIndex InterfaceIndex,
snMspsDhcpV4SrvSubnetPoolSubnetAddr InetAddressIPv4,
snMspsDhcpV4SrvSubnetPoolPrfxLength InetAddressPrefixLength,
snMspsDhcpV4SrvSubnetPoolLowerAddress InetAddressIPv4,
snMspsDhcpV4SrvSubnetPoolUpperAddress InetAddressIPv4,
snMspsDhcpV4SrvSubnetPoolLeaseTime Unsigned32,
snMspsDhcpV4SrvSubnetPoolPortList PortList,
snMspsDhcpV4SrvSubnetPoolName DisplayString,
snMspsDhcpV4SrvSubnetPoolRowStatus RowStatus
}
snMspsDhcpV4SrvSubnetPoolIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An auxiliary index."
::= { snMspsDhcpV4SrvSubnetPoolEntry 1 }
snMspsDhcpV4SrvSubnetPoolIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The ifIndex of the bound interface."
::= { snMspsDhcpV4SrvSubnetPoolEntry 2 }
snMspsDhcpV4SrvSubnetPoolSubnetAddr OBJECT-TYPE
SYNTAX InetAddressIPv4
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The subnet address."
::= { snMspsDhcpV4SrvSubnetPoolEntry 3 }
snMspsDhcpV4SrvSubnetPoolPrfxLength OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The prefix length."
::= { snMspsDhcpV4SrvSubnetPoolEntry 4 }
snMspsDhcpV4SrvSubnetPoolLowerAddress OBJECT-TYPE
SYNTAX InetAddressIPv4
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The lower IP address."
::= { snMspsDhcpV4SrvSubnetPoolEntry 5 }
snMspsDhcpV4SrvSubnetPoolUpperAddress OBJECT-TYPE
SYNTAX InetAddressIPv4
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The upper IP address."
::= { snMspsDhcpV4SrvSubnetPoolEntry 6 }
snMspsDhcpV4SrvSubnetPoolLeaseTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The lease time."
::= { snMspsDhcpV4SrvSubnetPoolEntry 7 }
snMspsDhcpV4SrvSubnetPoolPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Subnet Pool Port List."
DEFVAL { ''H } -- empty binary string
::= { snMspsDhcpV4SrvSubnetPoolEntry 8 }
snMspsDhcpV4SrvSubnetPoolName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Name for the subnet pool.Null terminated string."
::= { snMspsDhcpV4SrvSubnetPoolEntry 9 }
snMspsDhcpV4SrvSubnetPoolRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
""
::= { snMspsDhcpV4SrvSubnetPoolEntry 12 }
snMspsDhcpV4SrvSubnetOptTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDhcpV4SrvSubnetOptEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
::= { snMspsDhcpV4ServerObjects 3 }
snMspsDhcpV4SrvSubnetOptEntry OBJECT-TYPE
SYNTAX SnMspsDhcpV4SrvSubnetOptEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { snMspsDhcpV4SrvSubnetPoolIndex, snMspsDhcpV4SrvSubnetOptCode }
::= { snMspsDhcpV4SrvSubnetOptTable 1 }
SnMspsDhcpV4SrvSubnetOptEntry ::= SEQUENCE {
snMspsDhcpV4SrvSubnetOptCode Unsigned32,
snMspsDhcpV4SrvSubnetOptUseIfIp TruthValue,
snMspsDhcpV4SrvSubnetOptLength Unsigned32,
snMspsDhcpV4SrvSubnetOptValue OCTET STRING,
snMspsDhcpV4SrvSubnetOptRowStatus RowStatus
}
snMspsDhcpV4SrvSubnetOptCode OBJECT-TYPE
SYNTAX Unsigned32(1..254)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is a control variable.
It is written by the remote management entity.
The DHCP option tag code."
REFERENCE
"RFC 2132;
RFC 3942;
RFC 4833."
::= { snMspsDhcpV4SrvSubnetOptEntry 1 }
snMspsDhcpV4SrvSubnetOptUseIfIp OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is a control variable.
It is written by the remote management entity.
Use the interface's IP address from the subnet specified by the pool if
applicable to the option's semantics."
::= { snMspsDhcpV4SrvSubnetOptEntry 2 }
snMspsDhcpV4SrvSubnetOptLength OBJECT-TYPE
SYNTAX Unsigned32(0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This is a control variable.
It is written by the remote management entity.
The length of the options's data part not including the two octets
specifying the tag code and length."
REFERENCE
"RFC 2132;
RFC 3942;
RFC 4833."
::= { snMspsDhcpV4SrvSubnetOptEntry 3 }
snMspsDhcpV4SrvSubnetOptValue OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..255))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This is a control variable.
It is written by the remote management entity.
The data part of the DHCP option."
REFERENCE
"RFC 2132;
RFC 3942;
RFC 4833."
::= { snMspsDhcpV4SrvSubnetOptEntry 4 }
snMspsDhcpV4SrvSubnetOptRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
""
::= { snMspsDhcpV4SrvSubnetOptEntry 7 }
snMspsDhcpV4SrvHostTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDhcpV4SrvHostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
::= { snMspsDhcpV4ServerObjects 4 }
snMspsDhcpV4SrvHostEntry OBJECT-TYPE
SYNTAX SnMspsDhcpV4SrvHostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { snMspsDhcpV4SrvHostHwType, snMspsDhcpV4SrvHostClientId, snMspsDhcpV4SrvSubnetPoolIndex }
::= { snMspsDhcpV4SrvHostTable 1 }
SnMspsDhcpV4SrvHostEntry ::= SEQUENCE {
snMspsDhcpV4SrvHostHwType Unsigned32,
snMspsDhcpV4SrvHostClientId OCTET STRING,
snMspsDhcpV4SrvHostAddress InetAddressIPv4,
snMspsDhcpV4SrvHostComment OCTET STRING,
snMspsDhcpV4SrvHostRowStatus RowStatus
}
snMspsDhcpV4SrvHostHwType OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The hardware type as defined in STD 2. E.g. a value of 1 means Ethernet,
and a value 0 denotes a c a non-HW"
REFERENCE
"RFC 1700;
RFC 3232;
RFC 4361."
::= { snMspsDhcpV4SrvHostEntry 1 }
snMspsDhcpV4SrvHostClientId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..64))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is a control variable.
It is written by the remote management entity.
The data part of the DHCP option."
REFERENCE
"RFC 2132;
RFC 3942;
RFC 4833."
::= { snMspsDhcpV4SrvHostEntry 2 }
snMspsDhcpV4SrvHostAddress OBJECT-TYPE
SYNTAX InetAddressIPv4
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The desired IP address."
::= { snMspsDhcpV4SrvHostEntry 3 }
snMspsDhcpV4SrvHostComment OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object represents the comment."
::= { snMspsDhcpV4SrvHostEntry 11 }
snMspsDhcpV4SrvHostRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
""
::= { snMspsDhcpV4SrvHostEntry 12 }
snMspsDhcpV4SrvBindTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDhcpV4SrvBindEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
::= { snMspsDhcpV4ServerObjects 7 }
snMspsDhcpV4SrvBindEntry OBJECT-TYPE
SYNTAX SnMspsDhcpV4SrvBindEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { snMspsDhcpV4SrvBindIpAddress }
::= { snMspsDhcpV4SrvBindTable 1 }
SnMspsDhcpV4SrvBindEntry ::= SEQUENCE {
snMspsDhcpV4SrvBindIpAddress IpAddress,
snMspsDhcpV4SrvBindHwType INTEGER,
snMspsDhcpV4SrvBindHwAddress OCTET STRING,
snMspsDhcpV4SrvBindExpireTime INTEGER,
snMspsDhcpV4SrvBindAllocMethod INTEGER,
snMspsDhcpV4SrvBindState INTEGER,
snMspsDhcpV4SrvBindXid Unsigned32,
snMspsDhcpV4SrvBindPoolID INTEGER,
snMspsDhcpV4SrvBindOptionCode82RemoteIdValue DisplayString,
snMspsDhcpV4SrvBindOptionCode82CircuitIdValue DisplayString
}
snMspsDhcpV4SrvBindIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" IpAddress associated with the binding."
::= { snMspsDhcpV4SrvBindEntry 1 }
snMspsDhcpV4SrvBindHwType OBJECT-TYPE
SYNTAX INTEGER {
clientid (0),
ethernet (1),
duid (255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Hardware address type of the binding. Value 0,
Indicates client identifier."
::= { snMspsDhcpV4SrvBindEntry 4 }
snMspsDhcpV4SrvBindHwAddress OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Hardware address of the binding."
::= { snMspsDhcpV4SrvBindEntry 7 }
snMspsDhcpV4SrvBindExpireTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Indicates time remaining for the binding. Negative
Values indicate already expired binding."
::= { snMspsDhcpV4SrvBindEntry 10 }
snMspsDhcpV4SrvBindAllocMethod OBJECT-TYPE
SYNTAX INTEGER {
dynamic (1),
static-leases (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Indicates the binding is for statically assigned
ip-address or automatically assigned from the pool."
::= { snMspsDhcpV4SrvBindEntry 13 }
snMspsDhcpV4SrvBindState OBJECT-TYPE
SYNTAX INTEGER {
offered (1),
assigned (2),
probing (5),
unknown(10)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" State of the binding. In offered state offer has been
sent, but no req has been received from the client.In
assigned state the address is assigned to the client.
In probing state the address is currently being probed
by the dhcp server."
::= { snMspsDhcpV4SrvBindEntry 16 }
snMspsDhcpV4SrvBindXid OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transaction ID, a random number chosen by the
client, used by the client and server to associate
messages and responses between a client and a
server."
::= { snMspsDhcpV4SrvBindEntry 19 }
snMspsDhcpV4SrvBindPoolID OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ID of pool containing the automatically assigned IpAddress."
::= { snMspsDhcpV4SrvBindEntry 22 }
snMspsDhcpV4SrvBindOptionCode82RemoteIdValue OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Remote ID value. Empty, if Option 82 is not supported by device."
::= { snMspsDhcpV4SrvBindEntry 30 }
snMspsDhcpV4SrvBindOptionCode82CircuitIdValue OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Circuit ID value. Empty, if Option 82 is not supported by device."
::= { snMspsDhcpV4SrvBindEntry 31 }
snMspsDhcpV4SrvSubnetOptionCode82Table OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDhcpV4SrvSubnetOptionCode82Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"DHCP subnet option code 82 table"
::= { snMspsDhcpV4ServerObjects 12 }
snMspsDhcpV4SrvSubnetOptionCode82Entry OBJECT-TYPE
SYNTAX SnMspsDhcpV4SrvSubnetOptionCode82Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { snMspsDhcpV4SrvSubnetPoolIndex, snMspsDhcpV4SrvSubnetOptionCode82AuxilaryIndex }
::= { snMspsDhcpV4SrvSubnetOptionCode82Table 1 }
SnMspsDhcpV4SrvSubnetOptionCode82Entry ::= SEQUENCE {
snMspsDhcpV4SrvSubnetOptionCode82AuxilaryIndex Unsigned32,
snMspsDhcpV4SrvSubnetOptionCode82RemoteIdValue DisplayString,
snMspsDhcpV4SrvSubnetOptionCode82CircuitIdValue DisplayString,
snMspsDhcpV4SrvSubnetOptionCode82RowStatus RowStatus
}
snMspsDhcpV4SrvSubnetOptionCode82AuxilaryIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Auxilary Index of snMspsDhcpV4SrvSubnetOptionCode82Table"
::= { snMspsDhcpV4SrvSubnetOptionCode82Entry 1 }
snMspsDhcpV4SrvSubnetOptionCode82RemoteIdValue OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..256))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Remote ID value"
DEFVAL { "" }
::= { snMspsDhcpV4SrvSubnetOptionCode82Entry 2 }
snMspsDhcpV4SrvSubnetOptionCode82CircuitIdValue OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..256))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Remote ID value"
DEFVAL { "" }
::= { snMspsDhcpV4SrvSubnetOptionCode82Entry 3 }
snMspsDhcpV4SrvSubnetOptionCode82RowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is the status of the row "
::= { snMspsDhcpV4SrvSubnetOptionCode82Entry 10 }
--- snMspsDhcpV4SrvHostOptTable
snMspsDhcpV4SrvHostOptTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDhcpV4SrvHostOptEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the host specific options that
are to be used by the server on response to a DHCP
DISCOVER message in a DHCP OFFER message."
::= { snMspsDhcpV4ServerObjects 13 }
snMspsDhcpV4SrvHostOptEntry OBJECT-TYPE
SYNTAX SnMspsDhcpV4SrvHostOptEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The various option objects common to all DHCP offer
messages."
INDEX { snMspsDhcpV4SrvHostType, snMspsDhcpV4SrvHostId,
snMspsDhcpV4SrvSubnetPoolIndex,snMspsDhcpV4SrvHostOptType }
::= { snMspsDhcpV4SrvHostOptTable 1 }
--
SnMspsDhcpV4SrvHostOptEntry ::=
SEQUENCE {
snMspsDhcpV4SrvHostType INTEGER,
snMspsDhcpV4SrvHostId OCTET STRING,
snMspsDhcpV4SrvHostOptType INTEGER,
snMspsDhcpV4SrvHostOptLen INTEGER,
snMspsDhcpV4SrvHostOptVal OCTET STRING,
snMspsDhcpV4SrvHostOptRowStatus RowStatus
}
snMspsDhcpV4SrvHostType OBJECT-TYPE
SYNTAX INTEGER (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies the type of host identifier,
whether this host specific entry is based on hardware
or non-hardware of the client. This option is one of
the index in the snMspsDhcpV4SrvHostOptTable"
::= { snMspsDhcpV4SrvHostOptEntry 1 }
snMspsDhcpV4SrvHostId OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(0..64))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The object identifies the host.This id is an
index to this table"
::= { snMspsDhcpV4SrvHostOptEntry 2 }
snMspsDhcpV4SrvHostOptType OBJECT-TYPE
SYNTAX INTEGER (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The object identifies the option, this is the
tag octet of the DHCP option. This option is the
index in the snMspsDhcpV4SrvSubnetOptTable."
::= { snMspsDhcpV4SrvHostOptEntry 3 }
snMspsDhcpV4SrvHostOptLen OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the length of the option
indicated by the option type. This length does not
include the two octets specifiying the tag and length. "
::= { snMspsDhcpV4SrvHostOptEntry 4 }
snMspsDhcpV4SrvHostOptVal OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the octets of data, of length
specified by snMspsDhcpV4SrvHostOptLen for that entry. "
::= { snMspsDhcpV4SrvHostOptEntry 5 }
snMspsDhcpV4SrvHostOptRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Row status of this entry."
::= { snMspsDhcpV4SrvHostOptEntry 10 }
snMspsDhcpV6ServerObjects OBJECT-IDENTITY
STATUS current
DESCRIPTION
"The MIB objects in this group define the Management Information Base
for a Dynamic Host Configuration Protocol (DHCP) server implementation."
::= { snMspsDhcpServerObjects 6 }
-- ----------------------------------------------------------------
-- MSPS COS Mapping Group Objects
-- ----------------------------------------------------------------
-- --------------------------------------------------------------
-- QoS COS Mapping Sub-Group
-- --------------------------------------------------------------
snMspsCosMappingTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsCosMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "COS to queue mapping table."
::= { snMspsQosCos 1 }
snMspsCosMappingEntry OBJECT-TYPE
SYNTAX SnMspsCosMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "COS to queue mapping table rows entries."
INDEX { snMspsCosMappingIndex }
::= { snMspsCosMappingTable 1 }
SnMspsCosMappingEntry ::= SEQUENCE {
snMspsCosMappingIndex INTEGER,
snMspsCosMappingQueue INTEGER
}
snMspsCosMappingIndex OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the values of the Vlan Priority field
within the incoming packet. Index is not zero based."
::= { snMspsCosMappingEntry 1 }
snMspsCosMappingQueue OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Indicates the queue to which packets with the specific Vlan priority values are assigned,
where zero is the lowest queue priority."
::= { snMspsCosMappingEntry 2 }
-- ----------------------------------------------------------------
-- MSPS DSCP Mapping Group Objects
-- ----------------------------------------------------------------
-- ----------------------------------------------------------------
-- MSPS Component Objects: DSCP Mapping MIB
-- ----------------------------------------------------------------
snMspsDscpMappingEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enables/Disables DSCP (DiffServ Code Point) to queues mapping."
::= { snMspsQosDscp 1 }
-- --------------------------------------------------------------
-- QoS DSCP Mapping Sub-Group
-- --------------------------------------------------------------
snMspsDscpMappingTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDscpMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "DSCP to queue mapping table."
::= { snMspsQosDscp 2 }
snMspsDscpMappingEntry OBJECT-TYPE
SYNTAX SnMspsDscpMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "DSCP to queue mapping table rows entries."
INDEX { snMspsDscpMappingIndex }
::= { snMspsDscpMappingTable 1 }
SnMspsDscpMappingEntry ::= SEQUENCE {
snMspsDscpMappingIndex INTEGER,
snMspsDscpMappingQueue INTEGER
}
snMspsDscpMappingIndex OBJECT-TYPE
SYNTAX INTEGER (0..63)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the values of the DSCP (DiffServ Code Point)
field within the incoming packet. Index is not zero based."
::= { snMspsDscpMappingEntry 1 }
snMspsDscpMappingQueue OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Indicates the queue to which packets with the specific DSCP value are assigned,
where zero is the lowest queue priority."
::= { snMspsDscpMappingEntry 2 }
snMspsACLControl OBJECT-TYPE
SYNTAX INTEGER {
no-operation(1),
start-learning(2),
stop-learning(3),
clear-static(4),
learning-in-progress(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Control Object for ACL Learning."
::= { snMspsAcl 1 }
-- snMspsAcl 2-3 reserved
-- ------------------------------------------------------------------
-- L2 Filter Group --------------------------------------------------
-- ------------------------------------------------------------------
snMspsAclL2FilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsAclL2FilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to configure L2 filter rules in the system."
::= { snMspsAcl 4 }
snMspsAclL2FilterEntry OBJECT-TYPE
SYNTAX SnMspsAclL2FilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table is a L2 filter rule.
Index to the table is the L2 filter number."
INDEX { snMspsAclL2FilterNo}
::= { snMspsAclL2FilterTable 1 }
SnMspsAclL2FilterEntry ::=
SEQUENCE {
snMspsAclL2FilterNo
Integer32,
snMspsAclL2FilterPriority
Integer32,
snMspsAclL2FilterEtherType
Integer32,
snMspsAclL2FilterProtocolType
Unsigned32,
snMspsAclL2FilterDstMacAddr
MacAddress,
snMspsAclL2FilterSrcMacAddr
MacAddress,
snMspsAclL2FilterVlanId
Integer32,
snMspsAclL2FilterInPortList
PortList,
snMspsAclL2FilterAction
INTEGER,
snMspsAclL2FilterMatchCount
Counter32,
snMspsAclL2FilterStatus
RowStatus,
snMspsAclL2FilterOutPortList
PortList,
snMspsAclL2FilterDirection
INTEGER
}
snMspsAclL2FilterNo OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"L2 Filter rule number."
::= { snMspsAclL2FilterEntry 1 }
snMspsAclL2FilterPriority OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The priority of the L2 filter can be used to decide which filter rule
is applicable when
--> the packet matches with more than one filter rules
--> All the filter rules result in 'allow'ing the packet
Higher value of 'filter priority' implies a higher priority.
Usage of 'L2FilterPriority' is implementation dependant."
DEFVAL { 1 }
::= { snMspsAclL2FilterEntry 2 }
snMspsAclL2FilterEtherType OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value in the Type/Len field of a frame that will
be matched to trigger this filter. The default value of
this object is '0'. When this object is SET with the default
value, frames are not matched for the value in the Type/Len
field with the value set for this object."
DEFVAL { 0 }
::= { snMspsAclL2FilterEntry 3 }
snMspsAclL2FilterProtocolType OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the non IP protocol type to be filtered.
aarp | amber | dec-spanning | decnet-iv |
diagnostic | dsm |etype-6000 | etype-8042 |
lat | lavc-sca | mop-console | mop-dump |
msdos | mumps | netbios | vines-echo |
vines-ip | xns-idp: A non-IP protocol.
A value of '0' means, the filter is applicable for all protocols."
DEFVAL { 0 }
::= { snMspsAclL2FilterEntry 4 }
snMspsAclL2FilterDstMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Destination MAC address to be matched with the packet. By Default, the
Destination Mac Address will be zero which means dont care condition ie)
any Dst Mac Address ."
::= { snMspsAclL2FilterEntry 5 }
snMspsAclL2FilterSrcMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Source MAC address to be matched with the packet. By Default, the Source
Mac Address will be zero which means dont care condition ie) any Src Mac
address"
::= { snMspsAclL2FilterEntry 6 }
snMspsAclL2FilterVlanId OBJECT-TYPE
SYNTAX Integer32 (0..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Vlan Id to be filtered. In case of Provider bridges, This Vlan Id will
be treated as customer Vlan Id.
A value of '0' means, this object is unused. Configuring this value is not
allowed."
DEFVAL { 0 }
::= { snMspsAclL2FilterEntry 7 }
snMspsAclL2FilterInPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the complete set of ports over which this filter is applied
for packets ingress at ports in this list.
If the In port list is '0', the filter rule is not applicable for any
incoming packets.
By default inport list is maintained as '0'."
::= { snMspsAclL2FilterEntry 8 }
snMspsAclL2FilterAction OBJECT-TYPE
SYNTAX INTEGER {
allow (1),
drop (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the action to be taken on the packet if the filter
rule matches.
If the action is 'allow', the packet will be forwarded according
to the forwarding rules.
If the action is 'drop', the packet will be discarded."
DEFVAL { allow }
::= { snMspsAclL2FilterEntry 9 }
snMspsAclL2FilterMatchCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of times this filter is matched."
::= { snMspsAclL2FilterEntry 10 }
snMspsAclL2FilterStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in this table is not used when this
object is SET 'notInService'. An entry created in this table is
be deleted when this object is SET 'destroy'."
::= { snMspsAclL2FilterEntry 11 }
snMspsAclL2FilterOutPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the complete set of ports over which this filter is applied
for packets egress at Ports in this list.
If the Out port list is '0', the filter rule is not applicable for any
outgoing packets.
By default outport list is maintained as '0'."
::= { snMspsAclL2FilterEntry 12 }
snMspsAclL2FilterDirection OBJECT-TYPE
SYNTAX INTEGER {
in (1),
out (2),
in-out (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the direction of this filter to be applied. By Default the
filter will be applied on ingress direction.
When the direction of this filter is 'in', It is applied on specified
ports of the snMspsAclL2FilterInPortList.
When the direction of this filter is 'out', It is applied on specified
ports of the snMspsAclL2FilterOutPortList.
When the direction of this filter is 'in-out', It is applied on specified
ports of the snMspsAclL2FilterInPortList and snMspsAclL2FilterOutPortList.
It will be changed to 'in-out' automatically, if ingress and egress port list are set."
DEFVAL { in }
::= { snMspsAclL2FilterEntry 13 }
-- ------------------------------------------------------------------
-- L3 Filter Group --------------------------------------------------
-- ------------------------------------------------------------------
snMspsAclL3FilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsAclL3FilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" A table to configure L3 filter rules in the system.
"
::= { snMspsAcl 5 }
snMspsAclL3FilterEntry OBJECT-TYPE
SYNTAX SnMspsAclL3FilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Each entry in this table is a L3 filter rule.
Index to the table is L3 filter number. "
INDEX { snMspsAclL3FilterNo}
::= { snMspsAclL3FilterTable 1 }
SnMspsAclL3FilterEntry ::=
SEQUENCE {
snMspsAclL3FilterNo
Integer32,
snMspsAclL3FilterPriority
Integer32,
snMspsAclL3FilterProtocol
Integer32,
snMspsAclL3FilterMessageType
Integer32,
snMspsAclL3FilterMessageCode
Integer32,
snMspsAclL3FilteAddrType
InetAddressType,
snMspsAclL3FilterDstIpAddr
InetAddress,
snMspsAclL3FilterSrcIpAddr
InetAddress,
snMspsAclL3FilterDstIpAddrPrefixLength
InetAddressPrefixLength,
snMspsAclL3FilterSrcIpAddrPrefixLength
InetAddressPrefixLength,
snMspsAclL3FilterMinDstProtPort
Unsigned32,
snMspsAclL3FilterMaxDstProtPort
Unsigned32,
snMspsAclL3FilterMinSrcProtPort
Unsigned32,
snMspsAclL3FilterMaxSrcProtPort
Unsigned32,
snMspsAclL3FilterInPortList
PortList,
snMspsAclL3FilterOutPortList
PortList,
snMspsAclL3FilterAckBit
INTEGER,
snMspsAclL3FilterRstBit
INTEGER,
snMspsAclL3FilterTos
Integer32,
snMspsAclL3FilterDscp
Integer32,
snMspsAclL3FilterDirection
INTEGER,
snMspsAclL3FilterAction
INTEGER,
snMspsAclL3FilterMatchCount
Counter32,
snMspsAclL3FilterFlowId
Unsigned32,
snMspsAclL3FilterStatus
RowStatus
}
snMspsAclL3FilterNo OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"L3 Filter rule number."
::= { snMspsAclL3FilterEntry 1 }
snMspsAclL3FilterPriority OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The priority of the filter can be used to decide which filter rule
is applicable when
--> the packet matches with more than one filter rules
--> All the filter rules result in 'allow'ing the packet
Higher value of 'L3 filter priority' implies a higher priority.
Usage of 'L3FilterPriority' is implementation dependant."
DEFVAL { 1 }
::= { snMspsAclL3FilterEntry 2 }
snMspsAclL3FilterProtocol OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The type of protocol to be checked against the packet. The
default value is 255. If the value is 255, it means that the
protocol type can be anything and it will not be checked to
decide the action. "
DEFVAL { 255 }
::= { snMspsAclL3FilterEntry 3 }
snMspsAclL3FilterMessageType OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The message type to be checked against the packet. If the
message type matches with the packet, then the packet will be
dropped / allowed based on the action set in snMspsAclL3FilterAction.
The default value is 255. It means that message type is not
configured and need not be checked.
Generally the value zero is given as default. But here
zero can be an ICMP Type value. Hence 255 is given as the
default value.
Some ICMP message types are:
echoReply(0),
destinationUnreachable(3),
sourceQuench(4),
redirect(5),
echoRequest(8),
timeExceeded(11),
parameterProblem(12),
timestampRequest(13),
timestampReply(14),
informationRequest(15),
informationReply(16),
addressMaskRequest(17),
addressMaskReply (18),
noICMPType(255)
"
DEFVAL { 255 }
::= { snMspsAclL3FilterEntry 4 }
snMspsAclL3FilterMessageCode OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The message code to be checked against the packet. If the
packet matches with the message code, then the packet will
be dropped / allowed based on the action set in snMspsAclL3FilterAction.
The default value is 255. It means that message code is not
configured and need not be checked. Generally the value zero
will be given as default. But here, zero can be an ICMP Code
value. Hence 255 is given as the default value.
Some ICMP message codes are :
networkUnreachable(0),
hostUnreachable(1),
protocolUnreachable(2),
portUnreachable(3),
fragmentNeed(4),
sourceRouteFail(5),
destNetworkUnknown(6),
destHostUnknown(7),
srcHostIsolated(8),
destNetworkAdminProhibited(9),
destHostAdminProhibited(10),
networkUnreachableTOS(11),
hostUnreachableTOS(12),
noICMPCode(255)
"
DEFVAL { 255 }
::= { snMspsAclL3FilterEntry 5 }
snMspsAclL3FilteAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of IP address used by this classifier entry. While
other types of addresses are defined in the InetAddressType
textual convention, and DNS names, a classifier can only look at
packets on the wire. Therefore, this object is limited to IPv4
and IPv6 addresses."
::= { snMspsAclL3FilterEntry 6 }
snMspsAclL3FilterDstIpAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IP address to match against the packet's destination IP
address. This may not be a DNS name, but may be an IPv4 or IPv6
prefix. snMspsAclL3FilterDstIpAddrPrefixLength indicates the
number of bits that are relevant."
::= { snMspsAclL3FilterEntry 7 }
snMspsAclL3FilterSrcIpAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IP address to match against the packet's source IP address.
This may not be a DNS name, but may be an IPv4 or IPv6 prefix.
snMspsAclL3FilterSrcIpAddrPrefixLength indicates the number of
bits that are relevant."
::= { snMspsAclL3FilterEntry 8 }
snMspsAclL3FilterDstIpAddrPrefixLength OBJECT-TYPE
SYNTAX InetAddressPrefixLength
UNITS "bits"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The length of the CIDR Prefix carried in
snMspsAclL3FilterDstIpAddr. In IPv4 addresses, a length of 0
indicates a match of any address; a length of 32 indicates a
match of a single host address, and a length between 0 and 32
indicates the use of a CIDR Prefix. IPv6 is similar, except that
prefix lengths range from 0..128."
DEFVAL { 0 }
::= { snMspsAclL3FilterEntry 9 }
snMspsAclL3FilterSrcIpAddrPrefixLength OBJECT-TYPE
SYNTAX InetAddressPrefixLength
UNITS "bits"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The length of the CIDR Prefix carried in
snMspsAclL3FilterSrcIpAddr. In IPv4 addresses, a length of 0
indicates a match of any address; a length of 32 indicates a
match of a single host address, and a length between 0 and 32
indicates the use of a CIDR Prefix. IPv6 is similar, except that
prefix lengths range from 0..128."
DEFVAL { 0 }
::= { snMspsAclL3FilterEntry 10 }
snMspsAclL3FilterMinDstProtPort OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The minimum port in the destination port range. Please note
these ports are the TCP / UDP ports."
DEFVAL { 0 }
::= { snMspsAclL3FilterEntry 11 }
snMspsAclL3FilterMaxDstProtPort OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum port in the destination port range. Please note
these ports are the TCP / UDP ports."
DEFVAL { 65535 }
::= { snMspsAclL3FilterEntry 12 }
snMspsAclL3FilterMinSrcProtPort OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The minimum port in the source port range. Please note
these ports are the TCP / UDP ports."
DEFVAL { 0 }
::= { snMspsAclL3FilterEntry 13 }
snMspsAclL3FilterMaxSrcProtPort OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum port in the source port range. Please note
these ports are the TCP / UDP ports."
DEFVAL { 65535 }
::= { snMspsAclL3FilterEntry 14 }
snMspsAclL3FilterInPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the complete set of ports over which if the packet arrives
this filter rule will be applicable.
If the incoming port list is '0', the filter rule is not applicable for any
incoming ports.
By default inport list is maintained as '0'."
::= { snMspsAclL3FilterEntry 15 }
snMspsAclL3FilterOutPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the complete set of ports over which if the packet goes out,
this filter rule will be applicable.
If the outgoing port list is '0', the filter rule is not applicable for any
outgoing packets.
By default outport list is maintained as '0'."
::= { snMspsAclL3FilterEntry 16 }
snMspsAclL3FilterAckBit OBJECT-TYPE
SYNTAX INTEGER {
establish(1),
notEstablish(2),
any(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The TCP ACK bit to be checked against the packet. The default
value is 'any'(3). It means that ACK bit will not be checked
to decide the action. "
DEFVAL { any }
::= { snMspsAclL3FilterEntry 17 }
snMspsAclL3FilterRstBit OBJECT-TYPE
SYNTAX INTEGER {
set(1),
notSet(2),
any(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The TCP RST bit to be checked against the packet. The default
value is 'any'(3). It means that RST bit will not be checked to
decide the action. "
DEFVAL { any }
::= { snMspsAclL3FilterEntry 18 }
snMspsAclL3FilterTos OBJECT-TYPE
SYNTAX Integer32 (-1..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The IP TOS bit to be checked against the packet. This is a
single byte integer of which the last three bits (least
significant bits) indicate Delay, Throughput and Reliability
i.e 'uuuuudtr', u-unused, d-delay, t-throughput, r-reliability.
For example '6' indicates low delay and high throughput.
A value of '-1' means, the Tos Field becomes dont care"
DEFVAL { -1 }
::= { snMspsAclL3FilterEntry 19 }
snMspsAclL3FilterDscp OBJECT-TYPE
SYNTAX Integer32 (-1..63)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The IP Dscp value to be checked against the packet.
A value of '-1' means, the Dscp Field becomes dont care."
DEFVAL { -1 }
::= { snMspsAclL3FilterEntry 20 }
snMspsAclL3FilterDirection OBJECT-TYPE
SYNTAX INTEGER {
in (1),
out(2),
in-out(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the direction of this filter to be applied. By Default the
filter will be applied on ingress direction.
When the direction of this filter is 'in', It is applied on specified
ports of the snMspsAclL3FilterInPortList.
When the direction of this filter is 'out', It is applied on specified
ports of the snMspsAclL3FilterOutPortList.
When the direction of this filter is 'in-out', It is applied on specified
ports of the snMspsAclL3FilterInPortList and snMspsAclL3FilterOutPortList.
It will be changed to 'in-out' automatically, if ingress and egress port list are set."
DEFVAL { in }
::= { snMspsAclL3FilterEntry 21 }
snMspsAclL3FilterAction OBJECT-TYPE
SYNTAX INTEGER {
allow (1),
drop (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the action to be taken on the packet if the filter
rule matches.
If the action is 'allow', the packet will be sent to the
ports in 'out port list'. If the out port list is '0',
the port over which the packet is to be switched will be decided
based on further processing on the packet.
If the action is 'drop', the packet will be discarded."
DEFVAL { allow }
::= { snMspsAclL3FilterEntry 22 }
snMspsAclL3FilterMatchCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of times this filter is matched."
::= { snMspsAclL3FilterEntry 23 }
snMspsAclL3FilterFlowId OBJECT-TYPE
SYNTAX Unsigned32 (0..1048575)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The flow identifier in an IPv6 header."
::= { snMspsAclL3FilterEntry 24 }
snMspsAclL3FilterStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in this table is not used when this
object is SET 'notInService'. An entry created in this table is
be deleted when this object is SET 'destroy'."
::= { snMspsAclL3FilterEntry 25 }
-- ------------------------------------------------------------------
-- ACL RULE Precedence Table-----------------------------------------
-- ------------------------------------------------------------------
snMspsAclPreOrder OBJECT IDENTIFIER ::= { snMspsAcl 8 }
snMspsAclPreOrderTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsAclPreOrderEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of ACL Rule Order Precedence information interface entries."
::= { snMspsAclPreOrder 1 }
snMspsAclPreOrderEntry OBJECT-TYPE
SYNTAX SnMspsAclPreOrderEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing ACL Rule Order Precedence to a
particular interface."
INDEX { snMspsAclPreOrderIfIndex }
::= { snMspsAclPreOrderTable 1 }
SnMspsAclPreOrderEntry ::=
SEQUENCE {
snMspsAclPreOrderIfIndex InterfaceIndex,
snMspsAclPreOrderMACInFilterList OCTET STRING,
snMspsAclPreOrderMACOutFilterList OCTET STRING,
snMspsAclPreOrderIPInFilterList OCTET STRING,
snMspsAclPreOrderIPOutFilterList OCTET STRING
}
snMspsAclPreOrderIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A unique value, greater than zero, of the interface."
::= { snMspsAclPreOrderEntry 1 }
snMspsAclPreOrderMACInFilterList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The list of MAC in filrers added for this Interface with precedence order of the ACL rule.
each octet from left to right repesent the ACL Rule Index. length of zero means no filter
configured for this interface on this type of filters."
::= { snMspsAclPreOrderEntry 2 }
snMspsAclPreOrderMACOutFilterList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The list of MAC out filrers added for this Interface with precedence order of the ACL rule.
each octet from left to right repesent the ACL Rule Index. length of zero means no filter
configured for this interface on this type of filters."
::= { snMspsAclPreOrderEntry 3 }
snMspsAclPreOrderIPInFilterList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The list of IP in filrers added for this Interface with precedence order of the ACL rule.
each octet from left to right repesent the ACL Rule Index. length of zero means no filter
configured for this interface on this type of filters."
::= { snMspsAclPreOrderEntry 4 }
snMspsAclPreOrderIPOutFilterList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The list of IP out filrers added for this Interface with precedence order of the ACL rule.
each octet from left to right repesent the ACL Rule Index. length of zero means no filter
configured for this interface on this type of filters."
::= { snMspsAclPreOrderEntry 5 }
-- ---------------------------------------------------------- --
-- Textual Conventions
-- ---------------------------------------------------------- --
AuthenticMethod ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The Authentication method is using Remote Authentication
Server or Local Authentication Server."
SYNTAX INTEGER {
remoteServer(1),
localServer(2)
}
RemoteAuthServerType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This indicates which Remote Server is to provide the
authentication. Currently supported servers are RADIUS
Server and Terminal Access Controller Access-Control
System Plus (TACACS+) Server."
SYNTAX INTEGER {
radiusServer(1),
tacacsplusServer(2)
}
PermissionType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The permission values."
SYNTAX INTEGER {
allow(1),
deny(2)
}
snMspsPnacAuthReAuthEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to configure ReAuthentication on
all the ports. Setting this object will inturn set
enable/disable control used by the Reauthentication
Timer state machine (8.5.5.1) for all the ports.
(Sets Port specific dot1xAuthReAuthEnabled from
the standard pnac MIB)."
::= { snMspsPnac 1 }
snMspsPnacAuthenticServer OBJECT-TYPE
SYNTAX AuthenticMethod
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to configure for the choice of
local or remote Authentication Server to be used by
the Authenticator for its authentication services."
::= { snMspsPnac 2 }
snMspsPnacNasId OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is the Network Access Server Identifier
to be presented before the remote Authentication
Server."
::= { snMspsPnac 3 }
-- snMspsPnac 4-6 reserved
snMspsPnacRemoteAuthServerType OBJECT-TYPE
SYNTAX RemoteAuthServerType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used by the Authenticator for its
authentication services, to configure the choice of
RADIUS or TACACS+ remote authentication servers when
the authentication method is through a remote server,
that is, this object can be configured only if
snMspsPnacAuthenticServer is set to remoteServer."
DEFVAL { 1 }
::= { snMspsPnac 7 }
-- snMspsPnac 8-9 reserved
-- Authenticator Session Table
snMspsPnacAuthSessionTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsPnacAuthSessionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains authentication session information
associated with each Supplicant while Authenticator
operates in MAC based authentication mode."
::= { snMspsPnac 10 }
snMspsPnacAuthSessionEntry OBJECT-TYPE
SYNTAX SnMspsPnacAuthSessionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Supplicant's MAC address and session ID, states of
Authenticator state machine and Backend state machine
for the session."
INDEX { snMspsPnacAuthSessionSuppAddress }
::= { snMspsPnacAuthSessionTable 1 }
SnMspsPnacAuthSessionEntry ::=
SEQUENCE {
snMspsPnacAuthSessionSuppAddress
MacAddress,
snMspsPnacAuthSessionIdentifier
Integer32,
snMspsPnacAuthSessionAuthPaeState
INTEGER,
snMspsPnacAuthSessionBackendAuthState
INTEGER,
snMspsPnacAuthSessionPortStatus
INTEGER,
snMspsPnacAuthSessionPortNumber
InterfaceIndex,
snMspsPnacAuthSessionInitialize
TruthValue,
snMspsPnacAuthSessionReauthenticate
TruthValue
}
snMspsPnacAuthSessionSuppAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MAC address of the supplicant for this session."
::= { snMspsPnacAuthSessionEntry 1 }
snMspsPnacAuthSessionIdentifier OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Session identifier of the supplicant for this
session."
::= { snMspsPnacAuthSessionEntry 2 }
snMspsPnacAuthSessionAuthPaeState OBJECT-TYPE
SYNTAX INTEGER {
initialize(1),
disconnected(2),
connecting(3),
authenticating(4),
authenticated(5),
aborting(6),
held(7),
forceAuth(8),
forceUnauth(9)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Authenticator state machine's state for this
session."
::= { snMspsPnacAuthSessionEntry 3 }
snMspsPnacAuthSessionBackendAuthState OBJECT-TYPE
SYNTAX INTEGER {
request(1),
response(2),
success(3),
fail(4),
timeout(5),
idle(6),
initialize(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Backend state machine's state for this session."
::= { snMspsPnacAuthSessionEntry 4 }
snMspsPnacAuthSessionPortStatus OBJECT-TYPE
SYNTAX PaeControlledPortStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current value of the controlled Port status
parameter for this session."
::= { snMspsPnacAuthSessionEntry 5 }
snMspsPnacAuthSessionPortNumber OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Port in which this session is proceeding."
::= { snMspsPnacAuthSessionEntry 6 }
snMspsPnacAuthSessionInitialize OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The initialization control for this Supplicant MAC
address. Setting this attribute TRUE causes the
Supplicant session with this MAC address, to be
initialized. The attribute value reverts to FALSE
once initialization has completed."
::= { snMspsPnacAuthSessionEntry 7 }
snMspsPnacAuthSessionReauthenticate OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The reauthentication control for this Supplicant MAC
address. Setting this attribute TRUE causes the
Authenticator PAE state machine for this MAC address
to reauthenticate the Supplicant. Setting this
attribute FALSE has no effect.
This attribute always returns FALSE when it is read."
::= { snMspsPnacAuthSessionEntry 8 }
-- PNAC Local Authentication Server User Configuration Table
snMspsPnacASUserConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsPnacASUserConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains authentication related User
configuration information maintained by PNAC
local Authentication Server."
::= { snMspsPnac 11 }
snMspsPnacASUserConfigEntry OBJECT-TYPE
SYNTAX SnMspsPnacASUserConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains User name, Password, Authentication
protocol used, Authenticated session timeout and Access
ports list of the User seeking authentication."
INDEX { snMspsPnacASUserConfigUserName }
::= { snMspsPnacASUserConfigTable 1 }
SnMspsPnacASUserConfigEntry ::=
SEQUENCE {
snMspsPnacASUserConfigUserName
OCTET STRING,
snMspsPnacASUserConfigPassword
DisplayString,
snMspsPnacASUserConfigAuthProtocol
Unsigned32,
snMspsPnacASUserConfigAuthTimeout
Unsigned32,
snMspsPnacASUserConfigPortList
PortList,
snMspsPnacASUserConfigPermission
PermissionType,
snMspsPnacASUserConfigRowStatus
RowStatus
}
snMspsPnacASUserConfigUserName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..115))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identity of the User seeking authentication. A string
of not more than 20 printable characters."
::= { snMspsPnacASUserConfigEntry 1 }
snMspsPnacASUserConfigPassword OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The secret Password of the User. A string of not
more than 20 printable characters.
When read, this always returns a String
of length zero."
::= { snMspsPnacASUserConfigEntry 2 }
snMspsPnacASUserConfigAuthProtocol OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Authentication protocol supported for the User."
::= { snMspsPnacASUserConfigEntry 3 }
snMspsPnacASUserConfigAuthTimeout OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The time in seconds after which the Authentication
offerred to the User ceases. Maximum value of the
object can be 7200 seconds. When the object value
is 0, the ReAuthPeriod of the Authenticator port is
used by Authenticator."
::= { snMspsPnacASUserConfigEntry 4 }
snMspsPnacASUserConfigPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The complete set of ports of Authenticator to
which the User is allowed or denied access, on the
basis of setting of 'snMspsPnacASUserConfigPermission'
object."
::= { snMspsPnacASUserConfigEntry 5 }
snMspsPnacASUserConfigPermission OBJECT-TYPE
SYNTAX PermissionType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"For the set of ports indicated by
'snMspsPnacASUserConfigPortList' object, the User is
allowed access when this object is set 'allow' and
is denied access when this object is set 'deny'."
::= { snMspsPnacASUserConfigEntry 6 }
snMspsPnacASUserConfigRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Row status of this entry."
::= { snMspsPnacASUserConfigEntry 7 }
-- Pae Port Table extensions
snMspsPnacPaePortTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsPnacPaePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of system level information for each port
supported by the device PNAC. An entry appears in this
table for each port of this system. This table is an
extension of dot1xPaePortTable of IEEE 802.1x MIB."
::= { snMspsPnac 12 }
snMspsPnacPaePortEntry OBJECT-TYPE
SYNTAX SnMspsPnacPaePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configuration as port based or MAC based authentication
and Supplicant count on a port. Index to this table is
same as that of the dot1xPaePortTable, which is the
InterfaceIndex."
INDEX { snMspsPnacPaePortNumber }
::= { snMspsPnacPaePortTable 1 }
SnMspsPnacPaePortEntry ::=
SEQUENCE {
snMspsPnacPaePortNumber
InterfaceIndex,
snMspsPnacPaePortAuthMode
INTEGER,
snMspsPnacPaePortSupplicantCount
Counter32,
snMspsPnacPaePortUserName
DisplayString,
snMspsPnacPaePortPassword
DisplayString,
snMspsPnacPaePortStatus
INTEGER,
snMspsPnacPaePortReAuthEnabled
TruthValue
}
snMspsPnacPaePortNumber OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port number associated with this port."
::= { snMspsPnacPaePortEntry 1 }
snMspsPnacPaePortAuthMode OBJECT-TYPE
SYNTAX INTEGER {
portBased(1),
macBased(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configuration of the port, for Port Based
Authentication or MAC Based Authentication."
::= { snMspsPnacPaePortEntry 2 }
snMspsPnacPaePortSupplicantCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Supplicants connected in the port."
::= { snMspsPnacPaePortEntry 3 }
snMspsPnacPaePortUserName OBJECT-TYPE
SYNTAX DisplayString (SIZE(4..63))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"User name to be used in this port, while operating
as a Supplicant."
::= { snMspsPnacPaePortEntry 4 }
snMspsPnacPaePortPassword OBJECT-TYPE
SYNTAX DisplayString (SIZE(4..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"User password to be used in this port, while
operating as a Supplicant."
::= { snMspsPnacPaePortEntry 5 }
snMspsPnacPaePortStatus OBJECT-TYPE
SYNTAX PaeControlledPortStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the combined Port status."
::= { snMspsPnacPaePortEntry 6 }
snMspsPnacPaePortReAuthEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The enable/disable control used by the Reauthentication
Timer state machine (8.5.5.1)."
REFERENCE
"9.4.1, reAuthEnabled"
DEFVAL { false }
::= { snMspsPnacPaePortEntry 7 }
-- -------------------------------------------------------------
-- SNMPv2 Notifications
-- -------------------------------------------------------------
snMspsTrapPnacPortAuthStateChange NOTIFICATION-TYPE
STATUS current
DESCRIPTION "Pnac port auth state change notification."
::= { snMspsTrapPrefix 451 }
-- -------------------------------------------------------------
-- END OF SNMPv2 Notifications
-- -------------------------------------------------------------
-- snMspsRadiusServer 1 reserved
snMspsRadExtMaxNoOfUserEntries OBJECT-TYPE
SYNTAX Integer32 (1 ..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Maximum of No of User entries stored. The value of this
object will be stored for the MemPool Initialization."
::= { snMspsRadiusServer 2 }
snMspsRadExtPrimaryServerAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The address type of active server.This can be Ipv4 or Ipv6."
::= { snMspsRadiusServer 3 }
snMspsRadExtPrimaryServer OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A maximum of 5 RADIUS servers (IPv4 or IPv6) can be configured
in snMspsRadExtServerEntry. This object indicates the primary server
among those 5 servers. The RADIUS client will first try to interact
with the server mentioned in this object. Other servers are
approached only if this server is not reachable. Setting this
object to zero disables the primary server concept."
::= { snMspsRadiusServer 4 }
snMspsRadExtServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsRadExtServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table that lists the RADIUS servers with
which the client shares a secret."
::= { snMspsRadiusServer 5 }
snMspsRadExtServerEntry OBJECT-TYPE
SYNTAX SnMspsRadExtServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) representing a RADIUS server
with which the client shares a secret."
INDEX {snMspsRadExtServerIndex}
::= { snMspsRadExtServerTable 1 }
SnMspsRadExtServerEntry ::= SEQUENCE {
snMspsRadExtServerIndex Integer32,
snMspsRadExtServerAddrType InetAddressType,
snMspsRadExtServerAddress InetAddress,
snMspsRadExtServerType INTEGER,
snMspsRadExtServerSharedSecret OCTET STRING,
snMspsRadExtServerEnabled INTEGER,
snMspsRadExtServerResponseTime Integer32,
snMspsRadExtServerMaximumRetransmission Integer32,
snMspsRadExtServerEntryStatus RowStatus
}
snMspsRadExtServerIndex OBJECT-TYPE
SYNTAX Integer32 (1..5)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object enumerates the order in which the server should
be contacted.Index 1 is contacted first if the primary server
specified by snMspsRadExtPrimaryServer is not configured"
::= { snMspsRadExtServerEntry 1 }
snMspsRadExtServerAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of IP address to be configured for the RADIUS server.
While other types of addresses are defined in the InetAddressType
textual convention, like DNS names, this object is limited to IPv4
and IPv6 addresses."
::= { snMspsRadExtServerEntry 2 }
snMspsRadExtServerAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address(Ipv4 or Ipv6) of the RADIUS server
referred to in snMspsRadExtServerTable entry."
::= { snMspsRadExtServerEntry 3 }
snMspsRadExtServerType OBJECT-TYPE
SYNTAX INTEGER { auth (1),
acct (2),
both (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The RADIUS server type (Authentication or Accounting or Both).
For creating a server entry, the Server Type should be set"
::= { snMspsRadExtServerEntry 4 }
snMspsRadExtServerSharedSecret OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The secret string which is shared between the Server and the
Client"
::= { snMspsRadExtServerEntry 5 }
snMspsRadExtServerEnabled OBJECT-TYPE
SYNTAX INTEGER { enabled (1),
disabled (2),
destroy (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object informs whether the server is active or inactive"
DEFVAL { enabled }
::= { snMspsRadExtServerEntry 6 }
snMspsRadExtServerResponseTime OBJECT-TYPE
SYNTAX Integer32 (1 ..120)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum time within which the server has to respond for a
request from the client."
::= { snMspsRadExtServerEntry 7 }
snMspsRadExtServerMaximumRetransmission OBJECT-TYPE
SYNTAX Integer32 (1 ..5)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The allowed maximum number of trials to be tried by a client to get
the response from the server for a request"
::= { snMspsRadExtServerEntry 8 }
snMspsRadExtServerEntryStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of the entry can be used as specified in the SNMP V2
standard. "
::= { snMspsRadExtServerEntry 9 }
snMspsRadExtAuthServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsRadExtAuthServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table taht lists the RADIUS authentication
servers with which the client shares a secret."
::= { snMspsRadiusServer 6 }
snMspsRadExtAuthServerEntry OBJECT-TYPE
SYNTAX SnMspsRadExtAuthServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) that represents a RADIUS
authentication server with which the client shares
a secret."
INDEX { snMspsRadExtAuthServerIndex }
::= { snMspsRadExtAuthServerTable 1 }
SnMspsRadExtAuthServerEntry ::= SEQUENCE {
snMspsRadExtAuthServerIndex Integer32,
snMspsRadExtAuthServerAddressType InetAddressType,
snMspsRadExtAuthServerAddress InetAddress,
snMspsRadExtAuthClientServerPortNumber Integer32,
snMspsRadExtAuthClientRoundTripTime TimeTicks,
snMspsRadExtAuthClientAccessRequests Counter32,
snMspsRadExtAuthClientAccessRetransmissions Counter32,
snMspsRadExtAuthClientAccessAccepts Counter32,
snMspsRadExtAuthClientAccessRejects Counter32,
snMspsRadExtAuthClientAccessChallenges Counter32,
snMspsRadExtAuthClientMalformedAccessResponses Counter32,
snMspsRadExtAuthClientBadAuthenticators Counter32,
snMspsRadExtAuthClientPendingRequests Gauge32,
snMspsRadExtAuthClientTimeouts Counter32,
snMspsRadExtAuthClientUnknownTypes Counter32,
snMspsRadExtAuthClientPacketsDropped Counter32,
snMspsRadExtAuthServerType INTEGER
}
snMspsRadExtAuthServerIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A number that uniquely idenfifies each RADIUS
Authentication server with which the client
communicates."
::= { snMspsRadExtAuthServerEntry 1 }
snMspsRadExtAuthServerAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address type (IPv4 or IPv6) of the RADIUS authentication
server referred to in the snMspsRadExtAuthServerTable entry."
::= { snMspsRadExtAuthServerEntry 2 }
snMspsRadExtAuthServerAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address (Ipv4 or Ipv6) of the RADIUS authentication
server referred to in this table entry."
::= { snMspsRadExtAuthServerEntry 3 }
snMspsRadExtAuthClientServerPortNumber OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The UDP port that the client uses to send requests to
this server."
::= { snMspsRadExtAuthServerEntry 4 }
snMspsRadExtAuthClientRoundTripTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time interval (in hundredths of a second) between
the most recent Access-Reply/Access-Challenge and the
Access-Request that that matches with the
Access-Reply/Access-Challengeit from the RADIUS
authentication server."
::= { snMspsRadExtAuthServerEntry 5 }
-- Request/Response statistics
--
-- TotalIncomingPackets = Accepts + Rejects + Challenges + UnknownTypes
--
-- TotalIncomingPackets - MalformedResponses - BadAuthenticators -
-- UnknownTypes - PacketsDropped = Successfully received
--
-- AccessRequests + PendingRequests + ClientTimeouts =
-- Successfully Received
--
--
snMspsRadExtAuthClientAccessRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS Access-Request packets sent
to this server. This does not include retransmissions."
::= { snMspsRadExtAuthServerEntry 6 }
snMspsRadExtAuthClientAccessRetransmissions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS Access-Request packets
retransmitted to this RADIUS authentication server."
::= { snMspsRadExtAuthServerEntry 7 }
snMspsRadExtAuthClientAccessAccepts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS Access-Accept packets
(valid or invalid) received from this server."
::= { snMspsRadExtAuthServerEntry 8 }
snMspsRadExtAuthClientAccessRejects OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS Access-Reject packets
(valid or invalid) received from this server."
::= { snMspsRadExtAuthServerEntry 9 }
snMspsRadExtAuthClientAccessChallenges OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS Access-Challenge packets
(valid or invalid) received from this server."
::= { snMspsRadExtAuthServerEntry 10 }
-- "Access-Response" includes an Access-Accept, Access-Challenge
-- or Access-Reject
snMspsRadExtAuthClientMalformedAccessResponses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of malformed RADIUS Access-Response
packets received from this server.
Malformed packets include packets with
an invalid length. Bad authenticators or
Signature attributes or unknown types are not
included as malformed access responses."
::= { snMspsRadExtAuthServerEntry 11 }
snMspsRadExtAuthClientBadAuthenticators OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS Access-Response packets
containing invalid authenticators or Signature
attributes received from this server."
::= { snMspsRadExtAuthServerEntry 12 }
snMspsRadExtAuthClientPendingRequests OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS Access-Request packets
destined for this server, which have not yet timed out
or received a response. This variable is incremented
when an Access-Request is sent and is decremented due to
receipt of an Access-Accept, Access-Reject or
Access-Challenge, a timeout or retransmission."
::= { snMspsRadExtAuthServerEntry 13 }
snMspsRadExtAuthClientTimeouts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of authentication timeouts to this server.
After the entry timeout the client may retry to the same
server, send to a different server, or
give up. Retry to the same server is counted as a
retransmit as well as a timeout. Send to a different
server is counted as a Request as well as a timeout."
::= { snMspsRadExtAuthServerEntry 14 }
snMspsRadExtAuthClientUnknownTypes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS packets of unknown type, which
were received from this server on the authentication port."
::= { snMspsRadExtAuthServerEntry 15 }
snMspsRadExtAuthClientPacketsDropped OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS packets, which were
received from this server on the authentication port
and dropped for some other reason."
::= { snMspsRadExtAuthServerEntry 16 }
snMspsRadExtAuthServerType OBJECT-TYPE
SYNTAX INTEGER { login (1),
pnac (2),
both (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The RADIUS Authentication server type (login or pnac or Both)."
DEFVAL { both }
::= { snMspsRadExtAuthServerEntry 17 }
snMspsRadAuthorizationMode OBJECT-TYPE
SYNTAX INTEGER
{
standard (1),
vendor-specific (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object used to parse the RADIUS accept/reject packet by standard mode or vendor-specific mode
to get the User Management Access Control (UMAC) value (user privilege) of the user.
standard - derive the function rights (user privilege) by 'SERVICE-TYPE attribute'
vendor-specific - derive the function rights (user privilege) by
'Siemens Vendor Specific Attribute' Vendor-ID (4196) and
Vendor Type (1) 'Siemens-Automation-Privileged-User-Group'."
DEFVAL { standard }
::= { snMspsRadiusServer 10 }
snMspsRadDisconnectPacketAllowStatus OBJECT-TYPE
SYNTAX INTEGER { enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object used to enable or disable RADIUS disconnect packets process."
DEFVAL { enabled }
::= { snMspsRadiusServer 11 }
snMspsGuestVlanSystem OBJECT IDENTIFIER ::= { snMspsGuestVlan 1 }
snMspsGuestVlanAddress OBJECT IDENTIFIER ::= { snMspsGuestVlan 2 }
snMspsGuestVlanPort OBJECT IDENTIFIER ::= { snMspsGuestVlan 3 }
-- --------------------------------------------------------------
-- GuestVlanTable Sub-Group
-- --------------------------------------------------------------
snMspsGuestVlanEnable OBJECT-TYPE
SYNTAX INTEGER {
guestVlanEnabled(1),
guestVlanDisabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "enable/disable GuestVlan"
DEFVAL { guestVlanDisabled }
::= { snMspsGuestVlanSystem 1}
-- --------------------------------------------------------------
-- GuestVlanAddrTable Sub-Group
-- --------------------------------------------------------------
snMspsGuestVlanAddressTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsGuestVlanAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION ""
::= { snMspsGuestVlanAddress 1 }
snMspsGuestVlanAddressEntry OBJECT-TYPE
SYNTAX SnMspsGuestVlanAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION ""
INDEX { snMspsGuestVlanAddressPort, snMspsGuestVlanAddressMac }
::= {snMspsGuestVlanAddressTable 1}
SnMspsGuestVlanAddressEntry ::=
SEQUENCE {
snMspsGuestVlanAddressMac
MacAddress,
snMspsGuestVlanAddressPort
INTEGER,
snMspsGuestVlanAddressVlan
INTEGER,
snMspsGuestVlanAddressInit
INTEGER
}
snMspsGuestVlanAddressMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "MAC address"
::= { snMspsGuestVlanAddressEntry 1 }
snMspsGuestVlanAddressPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Port-ID that address is authenticated or blocked"
::= { snMspsGuestVlanAddressEntry 2 }
snMspsGuestVlanAddressVlan OBJECT-TYPE
SYNTAX INTEGER (1.. 4096)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "VLAN-ID that address is authenticated or blocked"
::= { snMspsGuestVlanAddressEntry 3 }
snMspsGuestVlanAddressInit OBJECT-TYPE
SYNTAX INTEGER {
guestVlan-MAC-NoAction(1),
guestVlan-MAC-Init(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Reinitialization of that mac address"
::= { snMspsGuestVlanAddressEntry 4 }
-- --------------------------------------------------------------
-- GuestVlanPortConfig Sub-Group
-- --------------------------------------------------------------
snMspsGuestVlanPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsGuestVlanPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of ports for which Guest Vlans occurs on."
::= { snMspsGuestVlanPort 1 }
snMspsGuestVlanPortEntry OBJECT-TYPE
SYNTAX SnMspsGuestVlanPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Guest VLan Port entry. "
INDEX { snMspsGuestVlanPortIfIndex }
::= { snMspsGuestVlanPortTable 1 }
SnMspsGuestVlanPortEntry ::= SEQUENCE {
snMspsGuestVlanPortIfIndex INTEGER,
snMspsGuestVlanPortEnable INTEGER,
snMspsGuestVlanPortVid INTEGER,
snMspsGuestVlanPortMaxAddresses INTEGER,
snMspsGuestVlanPortActAddresses INTEGER,
snMspsGuestVlanPortInit INTEGER
}
snMspsGuestVlanPortIfIndex OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Port on which Guest Vlans occurs on."
::= { snMspsGuestVlanPortEntry 1 }
snMspsGuestVlanPortEnable OBJECT-TYPE
SYNTAX INTEGER {
guestVlanPortEnabled(1),
guestVlanPortDisabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "enables GuestVlan on that port"
DEFVAL { guestVlanPortDisabled}
::= { snMspsGuestVlanPortEntry 2 }
snMspsGuestVlanPortVid OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Guest VLAN-Id of that port"
DEFVAL { 1 }
::= { snMspsGuestVlanPortEntry 3 }
snMspsGuestVlanPortMaxAddresses OBJECT-TYPE
SYNTAX INTEGER (1..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "max number of addresses the could be activated in guest VLAN in parallel on that port"
DEFVAL { 1 }
::= { snMspsGuestVlanPortEntry 4 }
snMspsGuestVlanPortActAddresses OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "number of addresses that are actually activated in guest VLAN on that port"
::= { snMspsGuestVlanPortEntry 5 }
snMspsGuestVlanPortInit OBJECT-TYPE
SYNTAX INTEGER {
guestVlanNoAction(1),
guestVlanPortInit(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Reinitialization of all addresses activated in guest VLAN on that port"
DEFVAL { guestVlanNoAction }
::= { snMspsGuestVlanPortEntry 6 }
snMspsMacAuthSystem OBJECT IDENTIFIER ::= { snMspsMacAuth 1 }
snMspsMacAuthAddress OBJECT IDENTIFIER ::= { snMspsMacAuth 2 }
snMspsMacAuthPort OBJECT IDENTIFIER ::= { snMspsMacAuth 3 }
-- --------------------------------------------------------------
-- MacAuthTable Sub-Group
-- --------------------------------------------------------------
snMspsMacAuthEnable OBJECT-TYPE
SYNTAX INTEGER {
macAuthEnabled(1),
macAuthDisabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "enable/disable MAC authentication"
DEFVAL { macAuthDisabled }
::= { snMspsMacAuthSystem 1}
-- --------------------------------------------------------------
-- MacAuthAddrTable Sub-Group
-- --------------------------------------------------------------
snMspsMacAuthAddressTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsMacAuthAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION ""
::= { snMspsMacAuthAddress 1 }
snMspsMacAuthAddressEntry OBJECT-TYPE
SYNTAX SnMspsMacAuthAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION ""
INDEX { snMspsMacAuthAddressPort, snMspsMacAuthAddressMac }
::= {snMspsMacAuthAddressTable 1}
SnMspsMacAuthAddressEntry ::=
SEQUENCE {
snMspsMacAuthAddressMac
MacAddress,
snMspsMacAuthAddressPort
INTEGER,
snMspsMacAuthAddressVlan
INTEGER,
snMspsMacAuthAddressState
INTEGER,
snMspsMacAuthAddressReAuth
INTEGER
}
snMspsMacAuthAddressMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "MAC address"
::= { snMspsMacAuthAddressEntry 1 }
snMspsMacAuthAddressPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Port-ID that address is authenticated or blocked"
::= { snMspsMacAuthAddressEntry 2 }
snMspsMacAuthAddressVlan OBJECT-TYPE
SYNTAX INTEGER (1.. 4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "VLAN-ID that address is authenticated or blocked"
::= { snMspsMacAuthAddressEntry 3 }
snMspsMacAuthAddressState OBJECT-TYPE
SYNTAX INTEGER {
macAuthMACAuthenticated(1),
macAuthMACNotAuthenticated(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates wether address is authenticated or blocked"
::= { snMspsMacAuthAddressEntry 4 }
snMspsMacAuthAddressReAuth OBJECT-TYPE
SYNTAX INTEGER {
macAuthMACNoAction(1),
macAuthMACReAuth(2),
macAuthMACInit(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Reauthentication of that mac address. The value of this object
has only an effect if independant Reauthentication for MAC-Authentication
is supported by the device."
::= { snMspsMacAuthAddressEntry 5 }
-- --------------------------------------------------------------
-- MacAuthPortConfig Sub-Group
-- --------------------------------------------------------------
snMspsMacAuthPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsMacAuthPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of ports for which MAC Authentication occurs on."
::= { snMspsMacAuthPort 1 }
snMspsMacAuthPortEntry OBJECT-TYPE
SYNTAX SnMspsMacAuthPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "MAC Authentication Port entry. "
INDEX { snMspsMacAuthPortIfIndex }
::= { snMspsMacAuthPortTable 1 }
SnMspsMacAuthPortEntry ::= SEQUENCE {
snMspsMacAuthPortIfIndex INTEGER,
snMspsMacAuthPortEnable INTEGER,
snMspsMacAuthPortReAuth INTEGER,
snMspsMacAuthPortReAuthTimeout INTEGER,
snMspsMacAuthPortMaxAddresses INTEGER,
snMspsMacAuthPortVlanAssignment INTEGER,
snMspsMacAuthPortQuietTime INTEGER,
snMspsMacAuthPortActAddressesAuth INTEGER,
snMspsMacAuthPortActAddressesBlocked INTEGER,
snMspsMacAuthPortReAuthenticateStart INTEGER,
snMspsMacAuthPortEnableOnlyOnDot1xTimeout INTEGER
}
snMspsMacAuthPortIfIndex OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Port on which MAC Authentication occurs on."
::= { snMspsMacAuthPortEntry 1 }
snMspsMacAuthPortEnable OBJECT-TYPE
SYNTAX INTEGER {
macAuthPortEnabled(1),
macAuthPortDisabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "enables MAC authentication on that port"
DEFVAL { macAuthPortDisabled}
::= { snMspsMacAuthPortEntry 2 }
snMspsMacAuthPortReAuth OBJECT-TYPE
SYNTAX INTEGER {
macAuthReAuthEnabled(1),
macAuthReAuthDisabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Reauthentication enabled/disabled on that port.
The value of this object has only an effect if
independant Reauthentication for MAC-Authentication is supported by the device."
DEFVAL { 1 }
::= { snMspsMacAuthPortEntry 3 }
snMspsMacAuthPortReAuthTimeout OBJECT-TYPE
SYNTAX INTEGER (0..86400)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Timeout for automatic reauthentication.
The value of this object has only an effect if
independant Reauthentication for MAC-Authentication is supported by the device"
DEFVAL { 0 }
::= { snMspsMacAuthPortEntry 4 }
snMspsMacAuthPortMaxAddresses OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "max number of addresses the could be authenticated in parallel on that port,
configuration as 0 means after first successful mac authentication port is opened for all traffic"
DEFVAL { 1 }
::= { snMspsMacAuthPortEntry 5 }
snMspsMacAuthPortVlanAssignment OBJECT-TYPE
SYNTAX INTEGER {
macAuthVlanAssignEnabled(1),
macAuthVlanAssignDisabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The RADIUS server is allowed to assign VLANs on ports for authenticated addresses"
DEFVAL { macAuthVlanAssignDisabled }
::= { snMspsMacAuthPortEntry 6 }
snMspsMacAuthPortQuietTime OBJECT-TYPE
SYNTAX INTEGER (0..60)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Mininmal time between RADIUS server requests for the same address on that port.
The value of this object has only an effect if independant
Reauthentication for MAC-Authentication is supported by the device"
DEFVAL { 10 }
::= { snMspsMacAuthPortEntry 7 }
snMspsMacAuthPortActAddressesAuth OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "number of addresses that are actually authenticated on that port"
::= { snMspsMacAuthPortEntry 8 }
snMspsMacAuthPortActAddressesBlocked OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "number of addresses that are actually blocked on that port"
::= { snMspsMacAuthPortEntry 9 }
snMspsMacAuthPortReAuthenticateStart OBJECT-TYPE
SYNTAX INTEGER {
macAuthNoAction(1),
macAuthPortReAuthenticate(2),
macAuthPortReInit(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Reauthenticate all authenticated addresses on that port or cleanup all address information.
The value of this object has only an effect if independant
Reauthentication for MAC-Authentication is supported by the device"
DEFVAL { macAuthNoAction }
::= { snMspsMacAuthPortEntry 10 }
snMspsMacAuthPortEnableOnlyOnDot1xTimeout OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "enables MAC authentication on that port, when dot1x is timed out (or) on max retransmission."
DEFVAL { disabled }
::= { snMspsMacAuthPortEntry 11 }
snMspsSinemaInterfaceState OBJECT-TYPE
SYNTAX INTEGER {
paramactive(1),
newparamloaded(2),
activatingloadedparam(3),
activatingoriginalparam(4),
loadedparamactive(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "diagnose object for SINEMA interface state. It can be set to (1) Parameters Active,
(2) New Parameters Loaded, (3) Activating Loaded Parameters , (4) Activating Original Parameters,
(5) Loaded Parameters Active"
DEFVAL { paramactive }
::= { snMspsSinema 1 }
snMspsSinemaAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is for enabling / disabling availability of SCALANCE configuration interface"
::= { snMspsSinema 2 }
snMspsSinemaResult OBJECT-TYPE
SYNTAX INTEGER {
loadSuccess(1),
loadWrongState(2),
loadIllegalPackagetype(3),
loadTargetDeviceMismatch(4),
loadNotEnoughResources(5),
loadCoordinationError(6),
loadAlreadyRunningError(7),
loadNoAccess(8),
activateSuccess(9),
activateWrongState(10),
activateCoordinationError(11),
activateNotEnoughResources(12),
activateError(13),
activateNoAccess(14),
statusNotEnoughResources(15),
statusNothingLoaded(16),
statusNoAccess(17),
readSuccess(18),
readInstanceDataNotLoaded(19),
readNotEnoughResources(20),
readNoAccess(21),
acceptSuccess(22),
acceptNotEnoughResources(23),
acceptWrongState(24),
acceptNoAccess(25),
rollbackSuccess(26),
rollbackNotEnoughResources(27),
rollbackWrongState(28),
rollbackNoAccess(29)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Result of Configuration Event (CE) received from Sinema"
::= { snMspsSinema 3 }
snMspsSinemaErrorStatus OBJECT-TYPE
SYNTAX INTEGER {
noError(0),
tooBig(1),
noSuchName(2),
badValue(3),
readOnly(4),
genErr(5),
noAccess(6),
wrongType(7),
wrongLength(8),
wrongEncoding(9),
wrongValue(10),
noCreation(11),
inconsistentValue(12),
resourceUnavailable(13),
commitFailed(14),
undoFailed(15),
authorizationError(16),
notWritable(17),
inconsistentName(18)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Status of the error received with respect to position of SNMP variables in TLV package"
::= { snMspsSinema 4 }
snMspsSinemaErrorIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Location of the error received with respect to position of SNMP variables in TLV package"
::= { snMspsSinema 5 }
snMspsSinemaConfigSetTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsSinemaConfigSetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of SINEMA delta download config sets."
::= { snMspsSinema 20 }
snMspsSinemaConfigSetEntry OBJECT-TYPE
SYNTAX SnMspsSinemaConfigSetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry represents a delta download config set. Entry creation/deletion by user not possible"
INDEX { snMspsSinemaConfigSetIndex }
::= { snMspsSinemaConfigSetTable 1 }
SnMspsSinemaConfigSetEntry ::=
SEQUENCE {
snMspsSinemaConfigSetIndex
OCTET STRING,
snMspsSinemaConfigSetHash
OCTET STRING,
snMspsSinemaConfigSetState
INTEGER
}
snMspsSinemaConfigSetIndex OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Name of config set"
::= { snMspsSinemaConfigSetEntry 1 }
snMspsSinemaConfigSetHash OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Hash of config set as recevied from engineering system"
::= { snMspsSinemaConfigSetEntry 2 }
snMspsSinemaConfigSetState OBJECT-TYPE
SYNTAX INTEGER { enabled(1),disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"State of config set."
::= { snMspsSinemaConfigSetEntry 5 }
snMspsMstSystemControl OBJECT-TYPE
SYNTAX INTEGER { start(1), shutdown(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative shutdown status requested by management for the MST
feature. The value start (1) indicates that MST should be active in
the device on all ports. The value shutdown (2) indicates that MST
should be shutdown in the device on all ports. All memory should
be released on all ports."
::= { snMspsMstp 1 }
-- snMspsMstp 2-3 reserved
snMspsMstModuleStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative status requested by management for the MST
feature. The value enabled(1) indicates that Mst should be enabled
in the device on all ports. The value disabled(2) indicates that
Mst should be disabled in the device on all ports. The object can
be set to enabled(1) if and only if, fsMstSystemControl set to start."
::= { snMspsMstp 4 }
snMspsMstMaxMstInstanceNumber OBJECT-TYPE
SYNTAX Integer32 (1..64)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Maximun number of spanning trees to be allowed. An user may limit
the number of Spanning Tree instances to be allowed in the Bridge.
The value reflects the max number of active MSTIs that can be created.
It does not include the special MSTID, the PTETID, used to identify
VIDs used by Ethernet Switched Paths (ESPs)."
::= { snMspsMstp 5 }
snMspsMstNoOfMstiSupported OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates Maximum number of spanning tree Instances supported."
::= { snMspsMstp 6 }
snMspsMstMaxHopCount OBJECT-TYPE
SYNTAX Integer32 (600..4000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the Maximum Hop Count value. One-hundredth of the
configured value will be set as Max Hop Count.
An agent may return a badValue error if a set is attempted
to a value which is not a multiples of hundred."
DEFVAL { 2000 }
::= { snMspsMstp 7 }
snMspsMstBrgAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address used by this bridge when it must
be referred to in a unique fashion. It is
recommended that this be the numerically smallest
MAC address of all ports that belong to this
bridge. However it is only required to be unique.
When concatenated with snMspsMstCistBridgePriority or
snMspsMstMstiBridgePriority a unique BridgeIdentifier
is formed which is used in the Spanning Tree Protocol."
::= { snMspsMstp 8 }
snMspsMstCistRoot OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bridge identifier of the Root of the common spanning
tree as determined by the Spanning Tree Protocol
as executed by this node. This value is used as
the CIST Root Identifier parameter in all Configuration
Bridge PDUs originated by this node."
::= { snMspsMstp 9 }
snMspsMstCistRegionalRoot OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bridge identifier of the Root of the Multiple
spanning tree region as determined by the Spanning Tree
Protocol as executed by this node. This value is used as
the CIST Regional Root Identifier parameter in all Configuration
Bridge PDUs originated by this node."
::= { snMspsMstp 10 }
snMspsMstCistRootCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Cost of the path to the CIST Root as seen
from this bridge."
::= { snMspsMstp 11 }
snMspsMstCistRegionalRootCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Cost of the path to the CIST Regional Root
as seen from this bridge."
::= { snMspsMstp 12 }
snMspsMstCistRootPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Port Number of the Port which offers the lowest
path cost from this bridge to the CIST Root Bridge."
::= { snMspsMstp 13 }
snMspsMstCistBridgePriority OBJECT-TYPE
SYNTAX Integer32 (0..61440)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Value of the writable portion of the Bridge
Identifier comprising of the first two octets.
The values that are set for Bridge Priority must be
in steps of 4096."
DEFVAL {32768}
::= { snMspsMstp 14 }
snMspsMstCistBridgeMaxAge OBJECT-TYPE
SYNTAX Timeout (600..4000)
UNITS "centi-seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value that all bridges use for MaxAge when
this bridge is acting as the root. The granularity
of this timer is specified to be 1 second.
An agent may return a badValue error if a set is
attempted to a value which is not a whole number
of seconds."
DEFVAL {2000}
::= { snMspsMstp 15 }
snMspsMstCistBridgeForwardDelay OBJECT-TYPE
SYNTAX Timeout (400..3000)
UNITS "centi-seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value that all bridges use for ForwardDelay
when this bridge is acting as the root. Note that
802.1D specifies that the range for this
parameter is related to the value of
BridgeMaxAge. The granularity of this
timer is specified to be 1 second.
An agent may return a badValue error if a set is
attempted to a value which is not a whole number
of seconds."
DEFVAL {1500}
::= { snMspsMstp 16 }
snMspsMstCistHoldTime OBJECT-TYPE
SYNTAX Integer32
UNITS "centi-seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This time value determines the interval length
during which no more than two Configuration bridge
PDUs shall be transmitted by this node, in units
of hundredths of a second."
::= { snMspsMstp 17 }
snMspsMstCistMaxAge OBJECT-TYPE
SYNTAX Timeout
UNITS "centi-seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum age of Spanning Tree Protocol
information learned from the network on any port
before it is discarded, in units of hundredths of
a second. This is the actual value that this
bridge is currently using."
::= { snMspsMstp 18 }
snMspsMstCistForwardDelay OBJECT-TYPE
SYNTAX Timeout
UNITS "centi-seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This time value, measured in units of hundredths
of a second, controls how fast a port changes its
spanning state when moving towards the Forwarding
state. The value determines how long the port
stays in a particular state before moving to the
next state."
::= { snMspsMstp 19 }
snMspsMstMstpUpCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times MSTP Module has been enabled."
::= { snMspsMstp 20 }
snMspsMstMstpDownCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times MSTP Module has been disabled."
::= { snMspsMstp 21 }
-- snMspsMstp 22-24 reserved
snMspsMstForceProtocolVersion OBJECT-TYPE
SYNTAX INTEGER {
stpCompatible(0),
rstp(2),
mstp(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The version of Spanning Tree Protocol the bridge is
currently running. The value 'stpCompatible(0)'
indicates the Spanning Tree Protocol specified in
IEEE 802.1D and 'rstp(2)' indicates the Rapid Spanning
Tree Protocol specified in IEEE 802.1w and 'mstp(3)'
indicates the Multiple Spanning Tree Protocol Specified
in IEEE 802.1s."
DEFVAL { mstp }
::= { snMspsMstp 25 }
snMspsMstTxHoldCount OBJECT-TYPE
SYNTAX Integer32 (1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value used by the Port Transmit state machine to limit
the maximum transmission rate."
DEFVAL { 3 }
::= { snMspsMstp 26 }
snMspsMstMstiConfigIdSel OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Configuration Identifier Format Selector used
by the Bridge. This has a fixed value of 0 to indicate
RegionName, RegionVersion are specified as in Standard."
::= { snMspsMstp 27 }
snMspsMstMstiRegionName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Name for the Region's configuration. By Default
Region Name will be equal to the Bridge Mac Address."
::= { snMspsMstp 28 }
snMspsMstMstiRegionVersion OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Version of the MST Region."
::= { snMspsMstp 29 }
snMspsMstMstiConfigDigest OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Configuration Digest value for this Region."
::= { snMspsMstp 30 }
snMspsMstBufferOverFlowCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times Buffer overflows/failures have occured.
A Trap is generated on the occurence of this event."
::= { snMspsMstp 31 }
snMspsMstMemAllocFailureCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times memory allocation failures have occured.
A Trap is generated on the occurence of this event."
::= { snMspsMstp 32 }
snMspsMstRegionConfigChangeCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times a Region Configuration Identifier Change
was detected.
A Trap is generated on the occurence of this event."
::= { snMspsMstp 33 }
snMspsMstCistBridgeRoleSelectionSemState OBJECT-TYPE
SYNTAX INTEGER {
initbridge (0),
roleselection (1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current state of the Port Role Selection State Machine
of this bridge in Common Spanning Tree context"
::= { snMspsMstp 34 }
snMspsMstCistTimeSinceTopologyChange OBJECT-TYPE
SYNTAX TimeTicks
UNITS "centi-seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time (in hundredths of a second) since the
TcWhile Timer for any port in this Bridge was
non-zero for Common Spanning Tree context."
::= { snMspsMstp 35 }
snMspsMstCistTopChanges OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that there have been atleast
one non-zero TcWhile Timer on this Bridge for Common
Spanning Tree context."
::= { snMspsMstp 36 }
snMspsMstCistNewRootBridgeCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times this Bridge has detected a Root
Bridge change for Common Spanning Tree context.
A Trap is generated on the occurence of this event."
::= { snMspsMstp 37 }
snMspsMstCistHelloTime OBJECT-TYPE
SYNTAX Timeout
UNITS "centi-seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This time value, measured in units of hundredths
of a second, specifies the amount of time between
the transmission of configuration BPDUs by this node
on any port when it is the root of the spanning tree
or trying to become so."
::= { snMspsMstp 38 }
snMspsMstCistBridgeHelloTime OBJECT-TYPE
SYNTAX Timeout (100..200)
UNITS "centi-seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The amount of time between the transmission of
Configuration bridge PDUs by this node in units
of hundredths of a second."
::= { snMspsMstp 39 }
snMspsMstRstpPlusStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative module status requested by management for the RSTP+
Module. This enables or disables RSTP+ feature in the system.
A value of 'enabled' (1) indicates that RSTP+ feature is enabled
in the device. A value of 'disabled'(2) indicates that RSTP+ feature
is disabled in the device. This feature can be enabled only
if the device supports RSTP+ feature, otherwise it returns wrong value."
DEFVAL {disabled}
::= { snMspsMstp 40 }
snMspsMstRstpPlusMrpInterconDomainId OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents RstpPlus MRP Interconnection domain Id for
the RSTP and MRP ring coupling, which is equivalent to
MRP Interconnection domain Id 'snMspsMrpInterconDomainID'.
It returns inconsistency value, if the id is already configured
as a MRP Interconnection Id in the device. It should be unambiguous
with 'snMspsMrpInterconDomainID' and 'snMspsMstRstpPlusMrpInterconDomainId'
in the entire topology. This can be configurable only if the device
supports RSTP+ feature, otherwise it returns wrong value.
If the device not supports RSTP+ feature, get of this object returns default value.
This object is valid and effect only if 'snMspsMstRstpPlusStatus' is 'enabled'.
Valid value should be configured to enable 'snMspsMstRstpPlusStatus'."
DEFVAL { 1 }
::= { snMspsMstp 41 }
-- snMspsMstp 42-44 reserved
snMspsMstCistDynamicPathcostCalculation OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to determine whether dynamic pathcost
calculation is allowed or not.The value is determined by
management. If set to true, pathcost is calculated dynamically
from port speed(when the operational status of the port changes
from down to up), otherwise the link speed at the time of port
creation is used for calculating the path cost. In both cases
if the user has configured a pathcost for the port that will be
used. By default dynamic pathcost calculation is set to false."
DEFVAL { false }
::= { snMspsMstp 45 }
snMspsMstCalcPortPathCostOnSpeedChg OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to determine whether dynamic pathcost
calculation is done for a port for which Port Speed is changing
dynamically. This is mainly intended for Link Aggregated ports where
depening on Active ports speed of Link aggregated port changes.
By default dynamic pathcost calculation on change in speed is set to
false."
DEFVAL { false }
::= { snMspsMstp 46 }
-- -----------------------------------------------------------------
-- Mst VlanId to Instance Mapping Table
-- -----------------------------------------------------------------
snMspsMstVlanInstanceMappingTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsMstVlanInstanceMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains one entry for each instance of MSTP."
::= { snMspsMstp 47 }
snMspsMstVlanInstanceMappingEntry OBJECT-TYPE
SYNTAX SnMspsMstVlanInstanceMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row containing the status of the MSTP instance."
INDEX { snMspsMstInstanceIndex }
::= { snMspsMstVlanInstanceMappingTable 1 }
SnMspsMstVlanInstanceMappingEntry ::=
SEQUENCE {
snMspsMstInstanceIndex
Integer32,
snMspsMstMapVlanIndex
VlanId,
snMspsMstUnMapVlanIndex
VlanId,
snMspsMstSetVlanList
OCTET STRING,
snMspsMstResetVlanList
OCTET STRING,
snMspsMstInstanceVlanMapped
OCTET STRING,
snMspsMstInstanceVlanMapped2k
OCTET STRING,
snMspsMstInstanceVlanMapped3k
OCTET STRING,
snMspsMstInstanceVlanMapped4k
OCTET STRING
}
snMspsMstInstanceIndex OBJECT-TYPE
SYNTAX Integer32 (1..64|4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary integer within the range from 1 to the value of
Max Instance Number that uniquely identifies an instance. In
a Bridge that supports PBB-TE, the special MSTID of 4094, the
PTETID, identifies VIDs that can be used by Ethernet Switched
Paths (ESPs). ESPs are provisioned seperately by any external agent
and do not use spanning tree."
::= { snMspsMstVlanInstanceMappingEntry 1 }
snMspsMstMapVlanIndex OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The VlanId will get mapped to the spanning tree instance
specified. All the Instance Specific information for the
Member ports of the Vlan will be created.This object is
used only for SET operation.GET Operation returns null values.
If the VlanId to Instance Mapping has to be known then any
one of the VlanMapped object should be used."
::= { snMspsMstVlanInstanceMappingEntry 2 }
snMspsMstUnMapVlanIndex OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The VlanId will get unmapped from spanning tree instance
to which it it mapped. All the Instance Specific information
for the Member ports of the Vlan will get released.This object
is used only for SET operation.GET Operation returns null values."
::= { snMspsMstVlanInstanceMappingEntry 3 }
snMspsMstSetVlanList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..512))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN. The
first octet corresponds to VLANs with VlanIndex values
1 through 8; the second octet to VLANs 9 through
16 etc. The most significant bit of each octet
corresponds to the lowest VlanIndex value in that octet.
The set of vlans configured by management to map for this
Instance. If the VlanId to Instance Mapping has to be known
then any one of the VlanMapped object should be used.If a
vlan is already mapped to this Instance, it may not be mapped
again. This object is used only for SET operation.
GET Operation returns null values."
::= { snMspsMstVlanInstanceMappingEntry 4 }
snMspsMstResetVlanList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..512))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN. The
first octet corresponds to VLANs with VlanIndex values
1 through 8; the second octet to VLANs 9 through
16 etc. The most significant bit of each octet
corresponds to the lowest VlanIndex value in that octet.
The set of vlans configured by management to unmap from this
Instance. A vlan may not be unmapped from this instance if
it is not already mapped to this Instance. This object is
used only for SET operation.GET Operation returns null values."
::= { snMspsMstVlanInstanceMappingEntry 5 }
snMspsMstInstanceVlanMapped OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN. The
first octet corresponds to VLANs with VlanIndex values
1 through 8; the second octet to VLANs 9 through
16 etc. The most significant bit of each octet
corresponds to the lowest VlanIndex value in that octet.
For each VLAN that is mapped to this MSTP instance,
the bit corresponding to that VLAN is set to '1'."
::= { snMspsMstVlanInstanceMappingEntry 6 }
snMspsMstInstanceVlanMapped2k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANS with VlanIndex values 1025 through 2048. The
first octet corresponds to VLANs with VlanIndex values
1025 through 1032; the second octet to VLANs 1033
through 1040 etc. The most significant bit of each
octet corresponds to the lowest VlanIndex value in that
octet.
For each VLAN that is mapped to this MSTP instance,
the bit corresponding to that VLAN is set to '1'.
This object is only instantiated on devices with
support for VlanIndex values up to 4095."
::= { snMspsMstVlanInstanceMappingEntry 7 }
snMspsMstInstanceVlanMapped3k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANS with VlanIndex values 2049 through 3072. The
first octet corresponds to VLANs with VlanIndex values
of 2049 through 2056; the second octet to VLANs 2057
through 2064 etc. The most significant bit of each
octet corresponds to the lowest VlanIndex value in that
octet.
For each VLAN that is mapped to this MSTP instance,
the bit corresponding to that VLAN is set to '1'.
This object is only instantiated on devices with
support for VlanIndex values up to 4095."
::= { snMspsMstVlanInstanceMappingEntry 8 }
snMspsMstInstanceVlanMapped4k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANS with VlanIndex values 3073 through 4095. The
first octet corresponds to VLANs with VlanIndex values
3073 through 3080; the second octet to VLANs 3081
through 3088 etc. The most significant bit of each
octet corresponds to the lowest VlanIndex value in that
octet.
For each VLAN that is mapped to this MSTP instance,
the bit corresponding to that VLAN is set to '1'.
This object is only instantiated on devices with
support for VlanIndex values up to 4095."
::= { snMspsMstVlanInstanceMappingEntry 9 }
-- -----------------------------------------------------------------
-- END OF Mst VlanId to Instance Mapping Table
-- -----------------------------------------------------------------
snMspsMstSetTraps OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to enable and disable specific
MSTP traps. Currently the following are defined
0 - Traps are not enabled.
1 - General Traps like protocol up or down
2 - Exception Traps like memory failure or buffer failure
or port protocol migration or invalid packet rcvd in port
3 - All the above Traps "
::= { snMspsMstp 48 }
snMspsMstGenTrapType OBJECT-TYPE
SYNTAX INTEGER {
none (0),
up (1),
down (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The general events like
none - none of the below values
up - protocol UP,
down - protocol DOWN"
::= { snMspsMstp 49 }
-- snMspsMstp 50-59 reserved
-- -----------------------------------------------------------------
-- Mst Multiple Spanning Tree Instance Bridge Table
-- -----------------------------------------------------------------
snMspsMstMstiBridgeTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsMstMstiBridgeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table containing Bridge Information specific to Spanning
Tree Instance."
::= { snMspsMstp 60 }
snMspsMstMstiBridgeEntry OBJECT-TYPE
SYNTAX SnMspsMstMstiBridgeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry indicating the Bridge Information."
INDEX { snMspsMstMstiInstanceIndex }
::= { snMspsMstMstiBridgeTable 1 }
SnMspsMstMstiBridgeEntry ::=
SEQUENCE {
snMspsMstMstiInstanceIndex
Integer32,
snMspsMstMstiBridgeRegionalRoot
BridgeId,
snMspsMstMstiBridgePriority
Integer32,
snMspsMstMstiRootCost
Integer32,
snMspsMstMstiRootPort
Integer32,
snMspsMstMstiTimeSinceTopologyChange
TimeTicks,
snMspsMstMstiTopChanges
Counter32,
snMspsMstMstiNewRootBridgeCount
Counter32,
snMspsMstMstiBridgeRoleSelectionSemState
INTEGER,
snMspsMstInstanceUpCount
Counter32,
snMspsMstInstanceDownCount
Counter32,
snMspsMstOldDesignatedRoot
BridgeId
}
snMspsMstMstiInstanceIndex OBJECT-TYPE
SYNTAX Integer32 (1..64|4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Spanning Tree Instance to which the information belongs.
The special MSTID of 4094, known as the PTETID, identifies VIDs
that are used by Ethernet Switched Paths (ESPs)."
::= { snMspsMstMstiBridgeEntry 1 }
snMspsMstMstiBridgeRegionalRoot OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MSTI Regional Root Identifier value for the Instance. This value
is used as the MSTI Regional Root Identifier parameter in all
Configuration Bridge PDUs originated by this node"
::= { snMspsMstMstiBridgeEntry 2 }
snMspsMstMstiBridgePriority OBJECT-TYPE
SYNTAX Integer32 (0..61440)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The writable portion of the MSTI Bridge Identifier.
comprising of the first two octets.
The values that are set for Bridge Priority must be
in steps of 4096."
DEFVAL {32768}
::= { snMspsMstMstiBridgeEntry 3 }
snMspsMstMstiRootCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Cost of the path to the MSTI Regional Root as seen
by this bridge."
::= { snMspsMstMstiBridgeEntry 4 }
snMspsMstMstiRootPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Port Number of the Port which offers the lowest
path cost from this bridge to the MSTI Region Root Bridge."
::= { snMspsMstMstiBridgeEntry 5 }
snMspsMstMstiTimeSinceTopologyChange OBJECT-TYPE
SYNTAX TimeTicks
UNITS "centi-seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time (in hundredths of a second) since the
TcWhile Timer for any port in this Bridge was
non-zero for this spanning tree instance."
::= { snMspsMstMstiBridgeEntry 6 }
snMspsMstMstiTopChanges OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that there have been atleast
one non-zero TcWhile Timer on this Bridge for this
spanning tree instance."
::= { snMspsMstMstiBridgeEntry 7 }
snMspsMstMstiNewRootBridgeCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times this Bridge has detected a Root
Bridge change for this spanning tree instance.
A Trap is generated on the occurence of this event."
::= { snMspsMstMstiBridgeEntry 8 }
snMspsMstMstiBridgeRoleSelectionSemState OBJECT-TYPE
SYNTAX INTEGER {
initbridge (0),
roleselection (1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current state of the Port Role Selection State Machine
for this spanning tree instance for this bridge."
::= { snMspsMstMstiBridgeEntry 9 }
snMspsMstInstanceUpCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times a new spanning tree instance has
been created.
A Trap is generated on the occurence of this event."
::= { snMspsMstMstiBridgeEntry 10 }
snMspsMstInstanceDownCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times a spanning tree instance has
been deleted.
A Trap is generated on the occurence of this event."
::= { snMspsMstMstiBridgeEntry 11 }
snMspsMstOldDesignatedRoot OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bridge identifier of the old root of the spanning
tree instance as determined by the Spanning Tree Protocol
as executed by this node. "
::= { snMspsMstMstiBridgeEntry 12 }
-- -----------------------------------------------------------------
-- END OF Mst Multiple Spanning Tree Instance Bridge Table
-- -----------------------------------------------------------------
-- snMspsMstp 61-62 reserved
-- -----------------------------------------------------------------
-- Mst Common Spanning Tree Port Table
-- -----------------------------------------------------------------
snMspsMstCistPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsMstCistPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains Common Spanning Tree Port
Information."
::= { snMspsMstp 63 }
snMspsMstCistPortEntry OBJECT-TYPE
SYNTAX SnMspsMstCistPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information maintained by every port for
Common Spanning tree."
INDEX { snMspsMstCistPort }
::= { snMspsMstCistPortTable 1 }
SnMspsMstCistPortEntry ::=
SEQUENCE {
snMspsMstCistPort
Integer32,
snMspsMstCistPortPathCost
Integer32,
snMspsMstCistPortPriority
Integer32,
snMspsMstCistPortDesignatedRoot
BridgeId,
snMspsMstCistPortDesignatedBridge
BridgeId,
snMspsMstCistPortDesignatedPort
OCTET STRING,
snMspsMstCistPortAdminP2P
INTEGER,
snMspsMstCistPortOperP2P
TruthValue,
snMspsMstCistPortAdminEdgeStatus
TruthValue,
snMspsMstCistPortOperEdgeStatus
TruthValue,
snMspsMstCistPortProtocolMigration
TruthValue,
snMspsMstCistPortState
INTEGER,
snMspsMstCistForcePortState
INTEGER,
snMspsMstCistPortForwardTransitions
Counter32,
snMspsMstCistPortRxMstBpduCount
Counter32,
snMspsMstCistPortRxRstBpduCount
Counter32,
snMspsMstCistPortRxConfigBpduCount
Counter32,
snMspsMstCistPortRxTcnBpduCount
Counter32,
snMspsMstCistPortTxMstBpduCount
Counter32,
snMspsMstCistPortTxRstBpduCount
Counter32,
snMspsMstCistPortTxConfigBpduCount
Counter32,
snMspsMstCistPortTxTcnBpduCount
Counter32,
snMspsMstCistPortInvalidMstBpduRxCount
Counter32,
snMspsMstCistPortInvalidRstBpduRxCount
Counter32,
snMspsMstCistPortInvalidConfigBpduRxCount
Counter32,
snMspsMstCistPortInvalidTcnBpduRxCount
Counter32,
snMspsMstCistPortTransmitSemState
INTEGER,
snMspsMstCistPortReceiveSemState
INTEGER,
snMspsMstCistPortProtMigrationSemState
INTEGER,
snMspsMstCistProtocolMigrationCount
Counter32,
snMspsMstCistPortDesignatedCost
Integer32,
snMspsMstCistPortRegionalRoot
BridgeId,
snMspsMstCistPortRegionalPathCost
Integer32,
snMspsMstCistSelectedPortRole
INTEGER,
snMspsMstCistCurrentPortRole
INTEGER,
snMspsMstCistPortInfoSemState
INTEGER,
snMspsMstCistPortRoleTransitionSemState
INTEGER,
snMspsMstCistPortStateTransitionSemState
INTEGER,
snMspsMstCistPortTopologyChangeSemState
INTEGER,
snMspsMstCistPortHelloTime
Timeout,
snMspsMstCistPortOperVersion
INTEGER,
snMspsMstCistPortEffectivePortState
TruthValue,
snMspsMstCistPortAutoEdgeStatus
TruthValue,
snMspsMstCistPortRestrictedRole
TruthValue,
snMspsMstCistPortRestrictedTCN
TruthValue,
snMspsMstCistPortAdminPathCost
Integer32,
snMspsMstCistPortEnableBPDURx
TruthValue,
snMspsMstCistPortEnableBPDUTx
TruthValue,
snMspsMstCistPortPseudoRootId
BridgeId,
snMspsMstCistPortIsL2Gp
TruthValue,
snMspsMstCistPortLoopGuard
TruthValue,
snMspsMstCistPortLimitedTCN
TruthValue
}
snMspsMstCistPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Port number of the port for which this entry contains
spanning tree information."
::= { snMspsMstCistPortEntry 1 }
snMspsMstCistPortPathCost OBJECT-TYPE
SYNTAX Integer32 (1..200000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The contribution of this port to the path cost of
paths towards the CIST Root which include this port."
::= { snMspsMstCistPortEntry 2 }
snMspsMstCistPortPriority OBJECT-TYPE
SYNTAX Integer32 (0..240)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The four most significant bits of the Port Identifier
of the Spanning Tree instance can be modified by setting
the CistPortPriority value. The values that are set for Port
Priority must be in steps of 16."
DEFVAL {128}
::= { snMspsMstCistPortEntry 3 }
snMspsMstCistPortDesignatedRoot OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unique Bridge Identifier of the bridge recorded as the
CIST Root in the configuration BPDUs transmitted."
::= { snMspsMstCistPortEntry 4 }
snMspsMstCistPortDesignatedBridge OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unique Bridge Identifier of the bridge which this port
considers to be the Designated Bridge for the port's segment."
::= { snMspsMstCistPortEntry 5 }
snMspsMstCistPortDesignatedPort OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (2))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Port identifier of the port on the Designated Bridge
for this port's segment."
::= { snMspsMstCistPortEntry 6 }
snMspsMstCistPortAdminP2P OBJECT-TYPE
SYNTAX INTEGER {
forceTrue(0),
forceFalse(1),
auto(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative point-to-point status of the LAN segment
attached to this port. A value of forceTrue(0) indicates that
this port should always be treated as if it is connected to
a point-to-point link. A value of forceFalse(1) indicates
that this port should be treated as having a shared media
connection. A value of auto(2) indicates that this port is
considered to have a point-to-point link if it is an Aggregator
and all of its members are aggregatable, or if the MAC entity
is configured for full duplex operation, either through
auto-negotiation or by management means."
::= { snMspsMstCistPortEntry 7 }
snMspsMstCistPortOperP2P OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational point-to-point status of the LAN segment
attached to this port. It indicates whether a port is
considered to have a point-to-point connection or not.
The value is determined by management or by auto-detection,
as described in the snMspsMstCistPortAdminP2P object."
::= { snMspsMstCistPortEntry 8 }
snMspsMstCistPortAdminEdgeStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative value of the Edge Port parameter. A
value of TRUE(1) indicates that this port should be
assumed as an edge-port and a value of FALSE(2) indicates
that this port should be assumed as a non-edge-port."
::= { snMspsMstCistPortEntry 9 }
snMspsMstCistPortOperEdgeStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational value of the Edge Port parameter. The
object is initialized to the value of
snMspsMstCistPortAdminEdgeStatus and is set FALSE on reception
of a BPDU."
DEFVAL { false }
::= { snMspsMstCistPortEntry 10 }
snMspsMstCistPortProtocolMigration OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the protocol migration state event
machine variable 'mcheck' for this port.
When operating in RSTP/MSTP (version >= 2) mode, writing
TRUE(1) to this object forces this port to transmit MSTP
BPDUs.
Any other operation on this object has no effect and
it always returns FALSE(2) when read."
DEFVAL { false }
::= { snMspsMstCistPortEntry 11 }
snMspsMstCistPortState OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
discarding (2),
learning (4),
forwarding (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current state of the Port as defined by the Common
spanning tree protocol."
::= { snMspsMstCistPortEntry 12 }
snMspsMstCistForcePortState OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Current state of the Port which can be changed to either
Disabled or Enabled for ALL spanning tree
instances. Setting this object will override the port's
status in any of the MSTI contexts"
::= { snMspsMstCistPortEntry 13 }
snMspsMstCistPortForwardTransitions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of times this port has transitioned to the
Forwarding State."
::= { snMspsMstCistPortEntry 14 }
snMspsMstCistPortRxMstBpduCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of MST BPDUs received on this port."
::= { snMspsMstCistPortEntry 15 }
snMspsMstCistPortRxRstBpduCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of RST BPDUs received on this port."
::= { snMspsMstCistPortEntry 16 }
snMspsMstCistPortRxConfigBpduCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Configuration BPDUs received on this port."
::= { snMspsMstCistPortEntry 17 }
snMspsMstCistPortRxTcnBpduCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of TCN BPDUs received on this port."
::= { snMspsMstCistPortEntry 18 }
snMspsMstCistPortTxMstBpduCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of MST BPDUs Transmitted from this port."
::= { snMspsMstCistPortEntry 19 }
snMspsMstCistPortTxRstBpduCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of RST BPDUs Transmitted from this port."
::= { snMspsMstCistPortEntry 20 }
snMspsMstCistPortTxConfigBpduCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Configuration BPDUs Transmitted from this port."
::= { snMspsMstCistPortEntry 21 }
snMspsMstCistPortTxTcnBpduCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of TCN BPDUs Transmitted from this port."
::= { snMspsMstCistPortEntry 22 }
snMspsMstCistPortInvalidMstBpduRxCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Invalid MST BPDUs Received on this port."
::= { snMspsMstCistPortEntry 23 }
snMspsMstCistPortInvalidRstBpduRxCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Invalid RST BPDUs Received on this port."
::= { snMspsMstCistPortEntry 24 }
snMspsMstCistPortInvalidConfigBpduRxCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Invalid Configuration BPDUs Received on this port."
::= { snMspsMstCistPortEntry 25 }
snMspsMstCistPortInvalidTcnBpduRxCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Invalid TCN BPDUs Received on this port."
::= { snMspsMstCistPortEntry 26 }
snMspsMstCistPortTransmitSemState OBJECT-TYPE
SYNTAX INTEGER {
transmitinit (0),
transmitperiodic (1),
transmitconfig (2),
transmittcn (3),
transmitrstp (4),
idle (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates current State of the Port Transmit state machine."
::= { snMspsMstCistPortEntry 27 }
snMspsMstCistPortReceiveSemState OBJECT-TYPE
SYNTAX INTEGER {
discard (0),
receive (1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates current State of the Port Receive state machine."
::= { snMspsMstCistPortEntry 28 }
snMspsMstCistPortProtMigrationSemState OBJECT-TYPE
SYNTAX INTEGER {
init (0),
sendrstp (1),
sendingrstp (2),
sendstp (3),
sendingstp (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates current State of the Port Protocol Migration
State machine."
::= { snMspsMstCistPortEntry 29 }
snMspsMstCistProtocolMigrationCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times this Port has migrated from one STP protocol
version to another. The relevant protocols are STP-COMPATIBLE and
RSTP/MSTP.
A Trap is generated on the occurence of this event."
::= { snMspsMstCistPortEntry 30 }
snMspsMstCistPortDesignatedCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The path cost of the Designated Port of the
segment connected to this port."
::= { snMspsMstCistPortEntry 31 }
snMspsMstCistPortRegionalRoot OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unique Bridge Identifier of the bridge recorded as the
CIST Regional Root Identifier in the configuration BPDUs
transmitted."
::= { snMspsMstCistPortEntry 32 }
snMspsMstCistPortRegionalPathCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The contribution of this port to the path cost of paths
towards the CIST Regional Root which include this port."
::= { snMspsMstCistPortEntry 33 }
snMspsMstCistSelectedPortRole OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
alternate(1),
backup(2),
root(3),
designated(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Selected Port Role of the port for this spanning
tree instance."
::= { snMspsMstCistPortEntry 34 }
snMspsMstCistCurrentPortRole OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
alternate(1),
backup(2),
root(3),
designated(4),
rstpPlus(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current Port Role of the port for this spanning
tree instance. It returns role 'rstpPlus',
if the port is ring port and spanning tree is enabled
on this port."
::= { snMspsMstCistPortEntry 35 }
snMspsMstCistPortInfoSemState OBJECT-TYPE
SYNTAX INTEGER {
disabled (0),
aged (1),
update (2),
superiordesg (3),
repeatdesg (4),
inferiordesg (5),
notdesg (6),
present (7),
receive (8),
other (9)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current state of the Port Information State Machine
for this port in this spanning tree context."
::= { snMspsMstCistPortEntry 36 }
snMspsMstCistPortRoleTransitionSemState OBJECT-TYPE
SYNTAX INTEGER {
init (0),
disableport (1),
disabledport (2),
rootport (3),
designatedport (4),
alternateport (5),
masterport (6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current state of the Port Role Transition State Machine
for this port in this spanning tree context."
::= { snMspsMstCistPortEntry 37 }
snMspsMstCistPortStateTransitionSemState OBJECT-TYPE
SYNTAX INTEGER {
discarding (0),
learning (1),
forwarding (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current state of the Port State Transition State Machine
for this port in this spanning tree context."
::= { snMspsMstCistPortEntry 38 }
snMspsMstCistPortTopologyChangeSemState OBJECT-TYPE
SYNTAX INTEGER {
inactive (0),
learning (1),
detected (2),
active (3),
notifiedtcn (4),
notifiedtc (5),
propagating (6),
acknowledged (7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current state of the Topology Change State Machine
for this port in this spanning tree context."
::= { snMspsMstCistPortEntry 39 }
snMspsMstCistPortHelloTime OBJECT-TYPE
SYNTAX Timeout (100..200)
UNITS "centi-seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The amount of time between the transmission of
Configuration bridge PDUs by this node on this port
in units of hundredths of a second."
::= { snMspsMstCistPortEntry 40 }
snMspsMstCistPortOperVersion OBJECT-TYPE
SYNTAX INTEGER {
stpCompatible(0),
rstp(2),
mstp(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates whether the Port is operationally in the Mstp
mode, Rstp mode or the Stp-compatible mode i.e., whether the
Port is transmitting MST BPDUs, RST BPDUs or Config/TCN BPDUs."
::= { snMspsMstCistPortEntry 41 }
snMspsMstCistPortEffectivePortState OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The effective operational state of the port for CIST. This will
TRUE only when the port is operationally up in the Interface level
and Protocol level for CIST. This is will be set to False for all
other times."
::= { snMspsMstCistPortEntry 42 }
snMspsMstCistPortAutoEdgeStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This parameter when TRUE(1) indicates that detection
of a port as Edge Port happens automatically
and FALSE(2) indicates that this feature is disabled."
::= { snMspsMstCistPortEntry 43 }
snMspsMstCistPortRestrictedRole OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A Boolean value set by management. If TRUE causes the Port not
to be selected as Root Port for the CIST or any MSTI, even it has
the best spanning tree priority vector. Such a Port will be selected
as an Alternate Port after the Root Port has been selected. This
parameter should be FALSE by default. If set it can cause lack of
spanning tree connectivity. It is set by a network administrator to
prevent bridges external to a core region of the network influencing
the spanning tree active topology, possibly because those bridges are
not under the full control of the administrator.
This administrator configuration is also known as 'Root Guard'."
::= {snMspsMstCistPortEntry 44}
snMspsMstCistPortRestrictedTCN OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A Boolean value set by management. If TRUE causes the Port not
to propagate received topology change notifications and topology
changes to other Ports. This parameter should be FALSE by default.
If set it can cause temporary loss of connectivity after changes in
a spanning trees active topology as a result of persistent
incorrectly learnt station location information. It is set by a
network administrator to prevent bridges external to a core region of
the network causing address flushing in that region, possibly because
those bridges are not under the full control of the administrator or
MAC_Operational for the attached LANs transitions frequently."
::= {snMspsMstCistPortEntry 45}
snMspsMstCistPortAdminPathCost OBJECT-TYPE
SYNTAX Integer32 (0..200000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administratively assigned value for the contribution
of this port to the path cost of paths toward the spanning
tree root.
Writing a value of '0' assigns the automatically calculated
default Path Cost value to the port. If the default Path
Cost is being used, this object returns '0' when read.
This complements the object dot1dStpPortPathCost or
dot1dStpPortPathCost32, which returns the operational value
of the path cost."
::= { snMspsMstCistPortEntry 46}
snMspsMstCistPortEnableBPDURx OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A Boolean value set by management. If FALSE, the BPDUs received on
the port are ignored."
REFERENCE "IEEE802.1ah - 13.25.18"
DEFVAL { true }
::= { snMspsMstCistPortEntry 47 }
snMspsMstCistPortEnableBPDUTx OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A Boolean value set by management. If FALSE, no BPDUs are transmitted
by this port. This variable should be FALSE before configuring port
as a Layer Two Gateway Port."
REFERENCE "IEEE802.1ah - 13.25.19"
DEFVAL { true }
::= { snMspsMstCistPortEntry 48 }
snMspsMstCistPortPseudoRootId OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"In MSTP Bridge, the snMspsMstCistPortPseudoRootId parameter value
by default, it is set to the BridgeIdentifier. The pseudoRootId
is used by Layer Two Gateway Port as the RootId in generated BPDUs."
REFERENCE "IEEE802.1ah - 13.25.20"
::= { snMspsMstCistPortEntry 49 }
snMspsMstCistPortIsL2Gp OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A Boolean value set by management. If TRUE, then port is functioning
as a Layer Two Gateway Port. The snMspsMstCistPortEnableBPDUTx should be
FALSE to set snMspsMstCistPortIsL2Gp to TRUE."
REFERENCE "IEEE802.1ah - 13.25.21"
DEFVAL { false }
::= { snMspsMstCistPortEntry 50 }
snMspsMstCistPortLoopGuard OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A Boolean value set by management. If TRUE, then it will not age out
the information even if the peer does not send information. If the port
continues to receive information through BPDUs the operation
on this port will be normal. This will be useful when the neighbor
bridge is faulty, i.e. it cannot send BPDUs but continues to send data
traffic."
DEFVAL { false }
::= { snMspsMstCistPortEntry 51 }
snMspsMstCistPortLimitedTCN OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"RSTP+ both the received and the detected (self-produced) TCs are accepted
but not forwarded. It comes into effect only if RSTP+ feature is enabled and
snMspsMstCistPortRestrictedTCN is set to FALSE."
DEFVAL { false }
::= { snMspsMstCistPortEntry 52 }
-- -----------------------------------------------------------------
-- END OF Mst Common Spanning Tree Port Table
-- -----------------------------------------------------------------
-- -----------------------------------------------------------------
-- Mst Multiple Spanning Tree Instance Port Table
-- -----------------------------------------------------------------
snMspsMstMstiPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsMstMstiPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains Spanning Tree Instance Specific Port
Information."
::= { snMspsMstp 64 }
snMspsMstMstiPortEntry OBJECT-TYPE
SYNTAX SnMspsMstMstiPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information maintained by every port for each
and every spanning tree instance."
INDEX { snMspsMstMstiPort, snMspsMstInstanceIndex }
::= { snMspsMstMstiPortTable 1 }
SnMspsMstMstiPortEntry ::=
SEQUENCE {
snMspsMstMstiPort
Integer32,
snMspsMstMstiPortPathCost
Integer32,
snMspsMstMstiPortPriority
Integer32,
snMspsMstMstiPortDesignatedRoot
BridgeId,
snMspsMstMstiPortDesignatedBridge
BridgeId,
snMspsMstMstiPortDesignatedPort
OCTET STRING,
snMspsMstMstiPortState
INTEGER,
snMspsMstMstiForcePortState
INTEGER,
snMspsMstMstiPortForwardTransitions
Counter32,
snMspsMstMstiPortReceivedBPDUs
Counter32,
snMspsMstMstiPortTransmittedBPDUs
Counter32,
snMspsMstMstiPortInvalidBPDUsRcvd
Counter32,
snMspsMstMstiPortDesignatedCost
Integer32,
snMspsMstMstiSelectedPortRole
INTEGER,
snMspsMstMstiCurrentPortRole
INTEGER,
snMspsMstMstiPortInfoSemState
INTEGER,
snMspsMstMstiPortRoleTransitionSemState
INTEGER,
snMspsMstMstiPortStateTransitionSemState
INTEGER,
snMspsMstMstiPortTopologyChangeSemState
INTEGER,
snMspsMstMstiPortEffectivePortState
TruthValue,
snMspsMstMstiPortAdminPathCost
Integer32,
snMspsMstMstiPortPseudoRootId
BridgeId
}
snMspsMstMstiPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Port number of the port for which this entry contains
spanning tree information."
::= { snMspsMstMstiPortEntry 1 }
snMspsMstMstiPortPathCost OBJECT-TYPE
SYNTAX Integer32 (1..200000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The contribution of this port to the path cost of
paths towards the MSTI Root which include this port."
::= { snMspsMstMstiPortEntry 2 }
snMspsMstMstiPortPriority OBJECT-TYPE
SYNTAX Integer32 (0..240)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The four most significant bits of the Port Identifier
for a given Spanning Tree instance can be modified
independently for each Spanning Tree instance
supported by the Bridge. The values that are set for Port
Priority must be in steps of 16."
DEFVAL {128}
::= { snMspsMstMstiPortEntry 3 }
snMspsMstMstiPortDesignatedRoot OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unique Bridge Identifier of the bridge recorded as the
MSTI Regional Root in the configuration BPDUs transmitted."
::= { snMspsMstMstiPortEntry 4 }
snMspsMstMstiPortDesignatedBridge OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unique Bridge Identifier of the bridge which this port
considers to be the Designated Bridge for the port's segment."
::= { snMspsMstMstiPortEntry 5 }
snMspsMstMstiPortDesignatedPort OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (2))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Port identifier of the port on the Designated Bridge
for this port's segment."
::= { snMspsMstMstiPortEntry 6 }
snMspsMstMstiPortState OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
discarding (2),
learning (4),
forwarding (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current state of the Port as defined by the Multiple
spanning tree protocol. Port which is Forwarding state
in one instance can be in Discarding (Blocking) state
in another instance."
::= { snMspsMstMstiPortEntry 7 }
snMspsMstMstiForcePortState OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Current state of the Port which can be changed to either
Disabled or Enabled for the specific spanning tree
instance. This object can be set to enabled only if the
'snMspsMstCistForcePortState' is set to 'enabled' for this port"
::= { snMspsMstMstiPortEntry 8 }
snMspsMstMstiPortForwardTransitions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of times this port has transitioned to the
Forwarding State for specific instance."
::= { snMspsMstMstiPortEntry 9 }
snMspsMstMstiPortReceivedBPDUs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of BPDUs received by this port for this
spanning tree instance."
::= { snMspsMstMstiPortEntry 10 }
snMspsMstMstiPortTransmittedBPDUs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of BPDUs transmitted on this port for
this spanning tree instance."
::= { snMspsMstMstiPortEntry 11 }
snMspsMstMstiPortInvalidBPDUsRcvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Invalid BPDUs received on this Port
for this spanning tree instance."
::= { snMspsMstMstiPortEntry 12 }
snMspsMstMstiPortDesignatedCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The path cost of the Designated Port of the
segment connected to this port."
::= { snMspsMstMstiPortEntry 13 }
snMspsMstMstiSelectedPortRole OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
alternate(1),
backup(2),
root(3),
designated(4),
master(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Selected Port Role of the port for this spanning
tree instance."
::= { snMspsMstMstiPortEntry 14 }
snMspsMstMstiCurrentPortRole OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
alternate(1),
backup(2),
root(3),
designated(4),
master(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current Port Role of the port for this spanning
tree instance."
::= { snMspsMstMstiPortEntry 15 }
snMspsMstMstiPortInfoSemState OBJECT-TYPE
SYNTAX INTEGER {
disabled (0),
aged (1),
update (2),
superiordesg (3),
repeatdesg (4),
inferiordesg (5),
notdesg (6),
present (7),
receive (8),
other (9)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current state of the Port Information State Machine
for this port in this spanning tree context."
::= { snMspsMstMstiPortEntry 16 }
snMspsMstMstiPortRoleTransitionSemState OBJECT-TYPE
SYNTAX INTEGER {
init (0),
disableport (1),
disabledport (2),
rootport (3),
designatedport (4),
alternateport (5),
masterport (6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current state of the Port Role Transition State Machine
for this port in this spanning tree context."
::= { snMspsMstMstiPortEntry 17 }
snMspsMstMstiPortStateTransitionSemState OBJECT-TYPE
SYNTAX INTEGER {
discarding (0),
learning (1),
forwarding (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current state of the Port State Transition State Machine
for this port in this spanning tree context."
::= { snMspsMstMstiPortEntry 18 }
snMspsMstMstiPortTopologyChangeSemState OBJECT-TYPE
SYNTAX INTEGER {
inactive (0),
learning (1),
detected (2),
active (3),
notifiedtcn (4),
notifiedtc (5),
propagating (6),
acknowledged (7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current state of the Topology Change State Machine
for this port in this spanning tree context."
::= { snMspsMstMstiPortEntry 19 }
snMspsMstMstiPortEffectivePortState OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The effective operational stae of the port for specific instance.
This is will be TRUE only when the port is operationally up in the
interface level and Protocol level for the specific instance.
This is will be set to false at all other times."
::= { snMspsMstMstiPortEntry 20 }
snMspsMstMstiPortAdminPathCost OBJECT-TYPE
SYNTAX Integer32 (0..200000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administratively assigned value for the contribution
of this port to the path cost of paths toward the spanning
tree root.
Writing a value of '0' assigns the automatically calculated
default Path Cost value to the port. If the default Path
Cost is being used, this object returns '0' when read.
This complements the object dot1dStpPortPathCost or
dot1dStpPortPathCost32, which returns the operational value
of the path cost."
::= { snMspsMstMstiPortEntry 21 }
snMspsMstMstiPortPseudoRootId OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"In MSTP Bridge, the snMspsMstMstiPortPseudoRootId parameter value
by default, it is set to the BridgeIdentifier. The pseudoRootId
is used by Layer Two Gateway Port as the RootId in generated BPDUs."
REFERENCE "IEEE802.1ah - 13.25.20"
::= { snMspsMstMstiPortEntry 22 }
-- -----------------------------------------------------------------
-- END OF Mst Multiple Spanning Tree Instance Port Table
-- -----------------------------------------------------------------
-- -------------------------------------------------------------
-- SNMPv2 Notifications
-- -------------------------------------------------------------
snMspsTrapMSTPNewRootbridgeDetected NOTIFICATION-TYPE
OBJECTS { snMspsMstBrgAddress, snMspsMstOldDesignatedRoot, snMspsMstMstiBridgeRegionalRoot }
STATUS current
DESCRIPTION
"(M)STP new Rootbridge detected."
::= { snMspsTrapPrefix 251 }
snMspsTrapMSTPTopChange NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"(M)STP Topologychange detected."
::= { snMspsTrapPrefix 252 }
-- -------------------------------------------------------------
-- END OF SNMPv2 Notifications
-- -------------------------------------------------------------
-- ----------------------------------------------------------------
-- MSPS SNMP Group Objects
-- ----------------------------------------------------------------
snMspsSnmpObjects OBJECT-IDENTITY
STATUS current
DESCRIPTION "
This MIB module defines MIB objects which provide
mechanisms to remotely configure the attributes used
by an MSPS hosted SNMP entity to control data exchange
with other SNMP entities.
"
::= { snMspsSnmp 1 }
snMspsSnmpAgentAttributes OBJECT-IDENTITY
STATUS current
DESCRIPTION ""
::= { snMspsSnmpObjects 1 }
snMspsSnmpAgentControl OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "
This object is used to enable or disable the SNMP agent.
"
DEFVAL { enabled }
::= { snMspsSnmpAgentAttributes 1 }
snMspsSnmpAllowedPduVersions OBJECT-TYPE
SYNTAX INTEGER {
snmpv3(1),
snmpv1v2c(2),
snmpv1v2cv3(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "
This object is used to control whether the agent will
reply to PDUs of a specific SNMP framework version. If
the PDU version of an incoming request does not match
the version required by this object, the PDU will be
silently discarded.
"
DEFVAL { snmpv1v2cv3 }
::= { snMspsSnmpAgentAttributes 2 }
snMspsSnmpMinimumSecurityRequired OBJECT-TYPE
SYNTAX INTEGER {
noAuthNoPriv(1),
authNoPriv(2),
authPriv(3)
}
-- From SNMP-FRAMEWORK-MIB
-- SYNTAX SnmpSecurityLevel
MAX-ACCESS read-write
STATUS current
DESCRIPTION "
This object is used to control whether the agent will
reply to PDUs of a specific SNMP security level. If
the PDU version of an incoming request does not match
the security level required by this object, the PDU will
be silently discarded.
"
DEFVAL { noAuthNoPriv }
::= { snMspsSnmpAgentAttributes 3 }
snMspsSnmpColdStartTrapControl OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "
This object is used to control whether the agent will
send a cold start trap.
"
DEFVAL { disabled }
::= { snMspsSnmpAgentAttributes 4 }
snMspsSnmpV1V2cPduReadOnly OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "
This object is used to control whether the agent will
restrict SNMPv1 and SNMPv2c PDUs to read-only access.
Enabling this object overrides any other administrative
setting that would grant read-write access for SNMPv1
and SNMPv2c PDUs to any MIB objects at this agent.
"
DEFVAL { disabled }
::= { snMspsSnmpAgentAttributes 5 }
snMspsSnmpV1TrapControl OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "
This object is used to control whether the agent will
generate SNMPv1 Trap PDUs.
The administrative state of this object is checked
additionally to any setting from the SNMP-TARGET-MIB
and the SNMP-NOTIFICATION-MIB that influences the
generation of a SNMPv1 Trap PDU.
"
DEFVAL { disabled }
::= { snMspsSnmpAgentAttributes 6 }
snMspsSNMPV3UserMigration OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "
This object is used to control whether the Engine ID
to be migrated or not.
"
DEFVAL { enabled }
::= { snMspsSnmpAgentAttributes 10 }
snMspsSnmpListenAgentPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNMP agent service's listening port.
Allowed values are default port and ports in the dynamic port range (49500-65535).
Get operation return current listening port.
The SNMP agent service must be disabled before this configuration is done
Set operation return Inconsistent value for any one of the following
1. if the set port value is other than allowed port range or
2. if the port already used by another service in the device or
3. if the device does not support to change the port."
DEFVAL { 161 }
::= { snMspsSnmpAgentAttributes 15 }
--
-- The snMspsSnmpTargetAddrExtTable
--
snMspsSnmpStdExt OBJECT-IDENTITY
STATUS current
DESCRIPTION ""
::= { snMspsSnmpObjects 5 }
snMspsSnmpTargetAddrExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsSnmpTargetAddrExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is an extension to standard MIB associated with the snmpTargetAddrTable.
The snMspsSnmpTargetAddrExtTable augments the
snmpTargetAddrTable with a entry for remote Engine ID which
is needed for V3 Inform messages."
::= { snMspsSnmpStdExt 10 }
snMspsSnmpTargetAddrExtEntry OBJECT-TYPE
SYNTAX SnMspsSnmpTargetAddrExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about the target EngineID."
AUGMENTS { snmpTargetAddrEntry }
::= { snMspsSnmpTargetAddrExtTable 1 }
SnMspsSnmpTargetAddrExtEntry ::= SEQUENCE {
snMspsSnmpTargetEngineId SnmpEngineID
}
snMspsSnmpTargetEngineId OBJECT-TYPE
SYNTAX SnmpEngineID
MAX-ACCESS read-write
STATUS current
DESCRIPTION "An SNMP engine's administratively-unique identifier.
In a simple agent, this value is always that agent's
own snmpEngineID value.
This object take the value of the snmpEngineID
of a remote SNMP engine with which this user can
communicate.
"
::= { snMspsSnmpTargetAddrExtEntry 1 }
-- ----------------------
-- snmspsnatv2.mib
--
-- SIEMENS AG
-- Automation & Drives
--
-- object definitions to support NAT functionality
--
-- Copyright (c) 2012 Siemens AG
-- All rights reserved.
-- ----------------------
NatStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The status of each feature of snMspsNatv2 i.e. whether it is enabled or
not"
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
snMspsNatv2EnabledStatus OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or Disables NATv2 globally."
DEFVAL { disabled }
::= { snMspsNatv2 1 }
snMspsNatv2IdleTimeOut OBJECT-TYPE
SYNTAX Integer32(60..86400)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This gives the amount of time until which a connection can stay idle,
after which the connection will be terminated. The time is given in
seconds."
DEFVAL { 60 }
::= { snMspsNatv2 2 }
snMspsNatv2TcpTimeOut OBJECT-TYPE
SYNTAX Integer32(300..86400)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This gives the amount of time the TCP session entry can be present in the
NAT session table without being used or referred, before being removed from
the NAT session table. Here time is in seconds."
DEFVAL { 3600 }
::= { snMspsNatv2 3 }
snMspsNatv2UdpTimeOut OBJECT-TYPE
SYNTAX Integer32(300..86400)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This gives the amount of time the UDP session entry can be present in the
NAT session table without being used or referred, before being removed from
the NAT session table. Here time is in seconds."
DEFVAL { 300 }
::= { snMspsNatv2 4 }
-- SCALAR_TABLE_END nat
-- NAT Dynamic Table, also called as translation table.
-- dynamic translation entries are created/deleted on the fly.
-- this table is for monitoring and not for configuration.
snMspsNatv2DynamicTransTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsNatv2DynamicTransEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is a read-only table which gives the IP address and port
mappings present in the NAT table. This is nothing but the NAT
translation table. Rows can neither be created nor be deleted using
the rowstatus column. Rows are automatically created and deleted by
NAT module. The rowstatus will always hold the value ACTIVE."
::= { snMspsNatv2 5 }
snMspsNatv2DynamicTransEntry OBJECT-TYPE
SYNTAX SnMspsNatv2DynamicTransEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the NAT dynamic table."
INDEX {
snMspsNatv2DynamicTransInterfaceNum,
snMspsNatv2DynamicTransLocalIp,
snMspsNatv2DynamicTransLocalPort,
snMspsNatv2DynamicTransOutsideIp,
snMspsNatv2DynamicTransOutsidePort
}
::= { snMspsNatv2DynamicTransTable 1 }
SnMspsNatv2DynamicTransEntry ::=
SEQUENCE {
snMspsNatv2DynamicTransInterfaceNum Integer32,
snMspsNatv2DynamicTransLocalIp IpAddress,
snMspsNatv2DynamicTransTranslatedLocalIp IpAddress,
snMspsNatv2DynamicTransLocalPort Integer32,
snMspsNatv2DynamicTransTranslatedLocalPort Integer32,
snMspsNatv2DynamicTransOutsideIp IpAddress,
snMspsNatv2DynamicTransOutsidePort Integer32,
snMspsNatv2DynamicTransLastUseTime Integer32
}
snMspsNatv2DynamicTransInterfaceNum OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This gives the global interface number on which the session is going
on."
::= { snMspsNatv2DynamicTransEntry 1 }
snMspsNatv2DynamicTransLocalIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This gives the actual IP address of the host connected to inside
network."
::= { snMspsNatv2DynamicTransEntry 2 }
snMspsNatv2DynamicTransTranslatedLocalIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the address assigned to the local host by NAT. All the hosts
from outside will contact the local host through this valid IP
Address."
::= { snMspsNatv2DynamicTransEntry 3 }
snMspsNatv2DynamicTransLocalPort OBJECT-TYPE
SYNTAX Integer32(1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is the actual source/destination port (UDP/TCP) used by the
local host for communicating with the outside network."
::= { snMspsNatv2DynamicTransEntry 4 }
snMspsNatv2DynamicTransTranslatedLocalPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the port number assigned by NAT, when PAT is enabled.
Otherwise the original port number is retained."
::= { snMspsNatv2DynamicTransEntry 5 }
snMspsNatv2DynamicTransOutsideIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This gives the IP address of the outside host which the above stated
Local host is contacting."
::= { snMspsNatv2DynamicTransEntry 6 }
snMspsNatv2DynamicTransOutsidePort OBJECT-TYPE
SYNTAX Integer32(1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is the port number of the outside host on which it is being
contacted."
::= { snMspsNatv2DynamicTransEntry 7 }
snMspsNatv2DynamicTransLastUseTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This gives the amount of time (in seconds) for which the above particular
connection has remained idle."
::= { snMspsNatv2DynamicTransEntry 8 }
-- NAT global IP address table. To list the global IP addresses obtained
-- from IANA.
snMspsNatv2GlobalAddressTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsNatv2GlobalAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This configuration table is used to list all the global IP addresses
obtained from InterNIC and which can be used by NAT module for
translation."
::= { snMspsNatv2 6 }
snMspsNatv2GlobalAddressEntry OBJECT-TYPE
SYNTAX SnMspsNatv2GlobalAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the NAT global IP address table."
INDEX {
snMspsNatv2GlobalAddressInterfaceNum,
snMspsNatv2GlobalAddressTranslatedLocalIp
}
::= { snMspsNatv2GlobalAddressTable 1 }
SnMspsNatv2GlobalAddressEntry ::=
SEQUENCE {
snMspsNatv2GlobalAddressInterfaceNum Integer32,
snMspsNatv2GlobalAddressTranslatedLocalIp IpAddress,
snMspsNatv2GlobalAddressMask IpAddress,
snMspsNatv2GlobalAddressEntryStatus RowStatus
}
snMspsNatv2GlobalAddressInterfaceNum OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This gives the interface number on which the global IP address given
below should be used for local IP address translation."
::= { snMspsNatv2GlobalAddressEntry 1 }
snMspsNatv2GlobalAddressTranslatedLocalIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is the IP address network number obtained from the IANA which can
be used by NAT for translating the local IP addresses whose packets are
going on the corresponding interface number given by
natGlobalAddressInterfaceNum."
::= { snMspsNatv2GlobalAddressEntry 2 }
snMspsNatv2GlobalAddressMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This when applied on the natGlobalAddressTranslatedLocalIp gives the
range of global IP Addresses that can be used by the NAT module to
translate the local IP Address whose packets are transmitted on the
given interface number."
::= { snMspsNatv2GlobalAddressEntry 3 }
snMspsNatv2GlobalAddressEntryStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of the entry can be used as specified in the SNMP V2
standard. "
::= { snMspsNatv2GlobalAddressEntry 4 }
-- NAT Static address assignment table
snMspsNatv2StaticTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsNatv2StaticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is a configurable table in which the static IP address
mapping between the LOCAL IP address and GLOBAL IP address is
configured."
::= { snMspsNatv2 7 }
snMspsNatv2StaticEntry OBJECT-TYPE
SYNTAX SnMspsNatv2StaticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the NAT static configuration table."
INDEX {
snMspsNatv2StaticInterfaceNum,
snMspsNatv2StaticLocalIp
}
::= { snMspsNatv2StaticTable 1 }
SnMspsNatv2StaticEntry ::=
SEQUENCE {
snMspsNatv2StaticInterfaceNum Integer32,
snMspsNatv2StaticLocalIp IpAddress,
snMspsNatv2StaticTranslatedLocalIp IpAddress,
snMspsNatv2StaticEntryStatus RowStatus
}
snMspsNatv2StaticInterfaceNum OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The local host listed below will use the corresponding global IP if it
sends packets on this interface."
::= { snMspsNatv2StaticEntry 1 }
snMspsNatv2StaticLocalIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is the IP address of the host present in the inside network."
::= { snMspsNatv2StaticEntry 2 }
snMspsNatv2StaticTranslatedLocalIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the IP address that should be used in the packets going out
from the given InsideLocalIp host to the outside network. In the
opposite direction this mapping will be used along with the NAT entry
to reverse translation. This global IP will not be used by any other
host."
::= { snMspsNatv2StaticEntry 3 }
snMspsNatv2StaticEntryStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of the entry can be used as specified in the SNMP V2
standard. "
::= { snMspsNatv2StaticEntry 4 }
-- NAT Static NAPT assignment table
snMspsNatv2StaticNaptTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsNatv2StaticNaptEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is a configurable table in which the static IP address
and Port mapping between the Local IP address, Local Port and Global
IP address, Global Port is configured."
::= { snMspsNatv2 8 }
snMspsNatv2StaticNaptEntry OBJECT-TYPE
SYNTAX SnMspsNatv2StaticNaptEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the NAT StaticNapt configuration table."
INDEX {
snMspsNatv2StaticNaptInterfaceNum,
snMspsNatv2StaticNaptLocalIp,
snMspsNatv2StaticNaptStartLocalPort,
snMspsNatv2StaticNaptEndLocalPort,
snMspsNatv2StaticNaptProtocolNumber
}
::= { snMspsNatv2StaticNaptTable 1 }
SnMspsNatv2StaticNaptEntry ::=
SEQUENCE {
snMspsNatv2StaticNaptInterfaceNum Integer32,
snMspsNatv2StaticNaptLocalIp IpAddress,
snMspsNatv2StaticNaptStartLocalPort Integer32,
snMspsNatv2StaticNaptEndLocalPort Integer32,
snMspsNatv2StaticNaptProtocolNumber INTEGER,
snMspsNatv2StaticNaptTranslatedLocalIp IpAddress,
snMspsNatv2StaticNaptTranslatedLocalPort Integer32,
snMspsNatv2StaticNaptDescription DisplayString,
snMspsNatv2StaticNaptEntryStatus RowStatus
}
snMspsNatv2StaticNaptInterfaceNum OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The local host with the local port listed below will use the
corresponding global IP and global port if it
sends packets on this interface."
::= { snMspsNatv2StaticNaptEntry 1 }
snMspsNatv2StaticNaptLocalIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is the IP address of the host present in the inside network."
::= { snMspsNatv2StaticNaptEntry 2 }
snMspsNatv2StaticNaptStartLocalPort OBJECT-TYPE
SYNTAX Integer32(1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is the start Port of the host present in the inside network."
::= { snMspsNatv2StaticNaptEntry 3 }
snMspsNatv2StaticNaptEndLocalPort OBJECT-TYPE
SYNTAX Integer32(1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is the End Port of the host present in the inside network."
::= { snMspsNatv2StaticNaptEntry 4 }
snMspsNatv2StaticNaptProtocolNumber OBJECT-TYPE
SYNTAX INTEGER {
tcp(6),
udp(17),
any(255)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is protocol number which is to be allowed"
::= { snMspsNatv2StaticNaptEntry 5 }
snMspsNatv2StaticNaptTranslatedLocalIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the IP address that should be used in the packets going out
from the given InsideLocalIp host to the outside network. In the
opposite direction this mapping will be used along with the NAT entry
to reverse translation."
::= { snMspsNatv2StaticNaptEntry 6 }
snMspsNatv2StaticNaptTranslatedLocalPort OBJECT-TYPE
SYNTAX Integer32(1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the Port that should be used in the packets going out
from the given InsideLocalIp host to the outside network. In the
opposite direction this mapping will be used along with the NAT entry
to reverse translation. "
::= { snMspsNatv2StaticNaptEntry 7 }
snMspsNatv2StaticNaptDescription OBJECT-TYPE
SYNTAX DisplayString(SIZE (1..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the description of the entry given by the user at the time
of configuration"
::= { snMspsNatv2StaticNaptEntry 8 }
snMspsNatv2StaticNaptEntryStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of the entry can be used as specified in the SNMP V2
standard. "
::= { snMspsNatv2StaticNaptEntry 9 }
--nat interface table
--defines the operation flags
snMspsNatv2IfTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsNatv2IfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This tables gives the interface number on which NAT,NAPT and
TWO WAY NAT are enabled."
::= { snMspsNatv2 9 }
snMspsNatv2IfEntry OBJECT-TYPE
SYNTAX SnMspsNatv2IfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the NAT Interface table."
INDEX {
snMspsNatv2IfInterfaceNumber
}
::= { snMspsNatv2IfTable 1 }
SnMspsNatv2IfEntry ::=
SEQUENCE {
snMspsNatv2IfInterfaceNumber Integer32,
snMspsNatv2IfNat NatStatus,
snMspsNatv2IfNapt NatStatus,
snMspsNatv2IfEntryStatus RowStatus
}
snMspsNatv2IfInterfaceNumber OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This gives the global interface number on which the following features
can be enabled."
::= { snMspsNatv2IfEntry 1 }
snMspsNatv2IfNat OBJECT-TYPE
SYNTAX NatStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This enables NAT on interface number given by natIfInterfaceNumber. Only
the inside host can initiate connections. Translation will be done on
outbound packets only. This object can be enabled only after
natGlobalAddressTable and natLocalAddressTable are configured."
DEFVAL { disabled }
::= { snMspsNatv2IfEntry 2 }
snMspsNatv2IfNapt OBJECT-TYPE
SYNTAX NatStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This enables port translation on interface number given by
natIfInterfaceNumber. If this feature is enabled, then the same global IP
address is overloaded and can be used for many local host by translating
the port number. natIfNat gets enabled when this object is enabled and
natIfNat cannot be disabled when natIfNapt is enabled."
DEFVAL { disabled }
::= { snMspsNatv2IfEntry 3 }
snMspsNatv2IfEntryStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of the entry can be used as specified in the SNMP V2
standard. "
::= { snMspsNatv2IfEntry 4 }
-- ----------------------------------------------------------------
-- MSPS C-PLUG Group Objects
-- ----------------------------------------------------------------
-- ----------------------------------------------------------------
-- MSPS Component Objects: SN-MSPS-CPLUG-MIB
-- ----------------------------------------------------------------
snMspsCplugState OBJECT-TYPE
SYNTAX INTEGER {
notPresent (1),
notAccepted (4),
accepted (5),
factory (6),
missing (7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Current status of the C-Plug.
1 - C-PLUG is not present
4 - C-PLUG is not accepted
5 - C-PLUG is accepted
6 - C-PLUG is in factory state
7 - C-PLUG is not present, but needed in the current configuration"
::= { snMspsCplug 1 }
snMspsCplugDeviceGroup OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Device Group string, which is currently stored on C-Plug"
::= { snMspsCplug 5 }
snMspsCplugDeviceType OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Device Type string, which is currently stored on C-Plug"
::= { snMspsCplug 6 }
snMspsCplugInfo OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Information about the C-PLUG as null terminated string"
DEFVAL {""}
::= { snMspsCplug 10 }
snMspsCplugErrNum OBJECT-TYPE
SYNTAX INTEGER {
noError (0),
damaged (1),
notReadable (3),
notWritable (4),
crcError (5),
wrongGroupID (6),
wrongTypeID (7),
wrongHwVersion (8),
wrongConfVersion (9),
noCplug (10),
invalidFiles (11)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "It displays the number of the last error. Following error codes are defined:
0 - C-PLUG has no Error
1 - C-PLUG is damaged
3 - C-PLUG can't be read
4 - C-PLUG can't be written
5 - C-PLUG has a CRC error
6 - No match in group identifier
7 - No match in type identifier
8 - Hardware version is not compatible
9 - Configuration version is not compatible
10 - C-PLUG is not present
11 - Files on the C-PLUG are not valid"
::= { snMspsCplug 11 }
snMspsCplugFileSystem OBJECT-TYPE
SYNTAX INTEGER {
fsNotFound (0),
fsTfssDos (1),
fsIecp (2),
fsInvalid (3),
fsUbifs (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The type of file system used on C-PLUG.
Following file system types are defined:
0 - No file system found
1 - TFSS DOS
2 - IECP
3 - File system is not valid
4 - UBIFS"
::= { snMspsCplug 12 }
snMspsCplugFileSystemSize OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total size of file system memory
in bytes on C-PLUG"
::= { snMspsCplug 13 }
snMspsCplugFileSystemUsage OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The size of file system memory
in bytes on C-PLUG, which is
currently allocated"
::= { snMspsCplug 14 }
snMspsCplugConfRevision OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The revision number of configuration,
which is currently stored on the C-PLUG"
::= { snMspsCplug 15 }
snMspsCplugFwOnPlugStatus OBJECT-TYPE
SYNTAX INTEGER {
not-supported (0),
fw-present(1),
fw-not-present(2),
not-enough-storage(10),
sync-error (11),
plug-not-accepted (12)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This status variable represents
current state of feature 'Firmware on PLUG':
0 - The feature is not supported on device.
1 - Firmware file is present on PLUG.
2 - Firmware file is not present on PLUG.
10 - The PLUG has not enough free storage.
11 - An error occurred during copying
or removing firmware file from PLUG.
12 - PLUG has a general error. Additional
information could be evaluated using read access
to snMspsCplugErrNum.
"
::= { snMspsCplug 18 }
snMspsCplugFwOnPlugEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This control variable
enables support of firmware file synchronization with PLUG.
"
DEFVAL { false }
::= { snMspsCplug 19 }
snMspsCplugFormat OBJECT-TYPE
SYNTAX INTEGER {
no-error (0),
clean (1),
write (2),
format-error (3),
no-cplug (4),
clean-in-progress (10),
write-in-progress (11)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Write access using factoryclean(1) initiates erasing
the complete C-PLUG to factory default. Write access
using write(2) initiates a factory clean and write of
the current device configuration to the C-PLUG. Write
access using other values will cause 'bad value' error.
Read access will return following values:
0 - No error is occurred.
3 - An error is occurred during formatting C-Plug.
4 - C-PLUG is not present on the device.
10 - Erasing C-PLUG to factory default in progress.
11 - Writing current device configuration to C-PLUG in progress.
In error case, additional error information could be evaluated
using read access to snMspsCplugErrNum.
"
::= { snMspsCplug 20 }
-- ----------------------------------------------------------------
-- MSPS KEY-PLUG Group Objects
-- ----------------------------------------------------------------
-- ----------------------------------------------------------------
-- MSPS Component Objects: SN-MSPS-KEY-PLUG-MIB
-- ----------------------------------------------------------------
snMspsKeyPlugState OBJECT-TYPE
SYNTAX INTEGER {
notPresent (1),
notAccepted (4),
accepted (5),
missing (7),
wrong (8),
unknown (9),
defective (10)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Current state of the KEY-PLUG.
Following states are defined:
1 - KEY-PLUG is not present
4 - KEY-PLUG is not accepted
5 - KEY-PLUG is accepted
7 - KEY-PLUG is missing
(device configuration was
previously created with KEY-PLUG)
8 - KEY-PLUG is wrong
(device configuration was created
with different KEY-PLUG)
9 - KEY-PLUG is unknown
10 - KEY-PLUG is defective"
::= { snMspsKeyPlug 1 }
-- snMspsKeyPlug 2 Reserved for future extensions
-- snMspsKeyPlug 3 Reserved for future extensions
-- snMspsKeyPlug 4 Reserved for future extensions
snMspsKeyPlugHwOrderId OBJECT-TYPE
SYNTAX SnMspsOrderNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Order ID (MLFB number) of KEY-PLUG"
::= { snMspsKeyPlug 5 }
snMspsKeyPlugHwSerialNumber OBJECT-TYPE
SYNTAX SnMspsSerialNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Serial number of KEY-PLUG"
::= { snMspsKeyPlug 6 }
snMspsKeyPlugFunction OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "List of features available with current KEY-PLUG"
::= { snMspsKeyPlug 7 }
-- ----------------------------------------------------------------
-- MSPS LOG Group Objects
-- ----------------------------------------------------------------
-- ----------------------------------------------------------------
-- MSPS Component Objects: LOG MIB
-- ----------------------------------------------------------------
snMspsLogMaxEntries OBJECT-TYPE
SYNTAX INTEGER (10..400)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Maximum number of events that can be kept in log book."
DEFVAL { 400 }
::= { snMspsLog 1 }
snMspsLogCurrentEntries OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of events that are currently kept log book."
::= { snMspsLog 2 }
-- snMspsLogNewEntries OBJECT-TYPE
-- SYNTAX INTEGER
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "Counter for events that are logged in Non-Volatile Memory.
-- This counter starts at 0 after each system start. User can reset
-- this counter at any time by writing 0 to this object."
-- DEFVAL { 0 }
-- ::= { snMspsLog 3 }
snMspsLogClear OBJECT-TYPE
SYNTAX INTEGER{
no-operation(1),
start-clear(2),
clear-in-progress(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Setting this object to start-clear(2) value, clears the
events that are kept in Non-Volatile Memory."
::= { snMspsLog 4 }
snMspsLogTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsLogEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table contains the last events that occurred in the system."
::= { snMspsLog 5 }
snMspsLogEntry OBJECT-TYPE
SYNTAX SnMspsLogEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The description of an event that occurred in the system,
and was stored in log book."
INDEX { snMspsLogEntryIdx }
::= { snMspsLogTable 1 }
SnMspsLogEntry ::= SEQUENCE {
snMspsLogEntryIdx INTEGER,
snMspsLogEntryId INTEGER,
snMspsLogRestart INTEGER,
snMspsLogSysUpTime DisplayString,
snMspsLogDescr DisplayString,
snMspsLogSeverity INTEGER,
snMspsLogSysTime DisplayString
}
snMspsLogEntryIdx OBJECT-TYPE
SYNTAX INTEGER (1..1200)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Log book ID of an entry."
::= { snMspsLogEntry 1 }
snMspsLogEntryId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Log book internal ID of an entry."
::= { snMspsLogEntry 2 }
snMspsLogRestart OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Log book entrys restart number"
::= { snMspsLogEntry 3 }
snMspsLogSysUpTime OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "System up time of entry in ASCII"
DEFVAL { "" }
::= { snMspsLogEntry 4 }
snMspsLogDescr OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "ASCII description of the event."
DEFVAL { "" }
::= { snMspsLogEntry 5 }
snMspsLogSeverity OBJECT-TYPE
SYNTAX INTEGER {
emergency(0),
alert(1),
critical(2),
error(3),
warning(4),
notice(5),
info(6),
debug(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Severity level of the event"
::= { snMspsLogEntry 6 }
snMspsLogSysTime OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "System time information"
DEFVAL { "" }
::= { snMspsLogEntry 7 }
snMspsSecurityLogMaxEntries OBJECT-TYPE
SYNTAX INTEGER (10..400)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum number of security-relevant events that can be kept in log book."
DEFVAL { 400 }
::= { snMspsLog 20 }
snMspsSecurityCurrentEntries OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of security events that are currently present in the log book."
::= { snMspsLog 21 }
snMspsSecurityLogClear OBJECT-TYPE
SYNTAX INTEGER{
no-operation(1),
start-clear(2),
clear-in-progress(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this object to start-clear(2) value, clears the
security events that are kept in Non-Volatile Memory."
::= { snMspsLog 22 }
snMspsSecurityLogTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsSecurityLogEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table contains the last security events that occurred in the system."
::= { snMspsLog 25 }
snMspsSecurityLogEntry OBJECT-TYPE
SYNTAX SnMspsSecurityLogEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The description of an event that occurred in the system,
and was stored in log book."
INDEX { snMspsSecurityLogEntryIdx }
::= { snMspsSecurityLogTable 1 }
SnMspsSecurityLogEntry ::= SEQUENCE {
snMspsSecurityLogEntryIdx INTEGER,
snMspsSecurityLogEntryId INTEGER,
snMspsSecurityLogRestart INTEGER,
snMspsSecurityLogSysUpTime DisplayString,
snMspsSecurityLogDescr DisplayString,
snMspsSecurityLogSeverity INTEGER,
snMspsSecurityLogSysTime DisplayString
}
snMspsSecurityLogEntryIdx OBJECT-TYPE
SYNTAX INTEGER (1..400)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Log book ID of an entry."
::= { snMspsSecurityLogEntry 1 }
snMspsSecurityLogEntryId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Log book internal ID of an entry."
::= { snMspsSecurityLogEntry 2 }
snMspsSecurityLogRestart OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Log book entrys restart number"
::= { snMspsSecurityLogEntry 3 }
snMspsSecurityLogSysUpTime OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "System up time of entry in ASCII"
DEFVAL { "" }
::= { snMspsSecurityLogEntry 4 }
snMspsSecurityLogDescr OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "ASCII description of the event."
DEFVAL { "" }
::= { snMspsSecurityLogEntry 5 }
snMspsSecurityLogSeverity OBJECT-TYPE
SYNTAX INTEGER {
emergency(0),
alert(1),
critical(2),
error(3),
warning(4),
notice(5),
info(6),
debug(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Severity level of the security event"
::= { snMspsSecurityLogEntry 6 }
snMspsSecurityLogSysTime OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "System time information"
DEFVAL { "" }
::= { snMspsSecurityLogEntry 7 }
snMspsFaultState OBJECT-TYPE
SYNTAX INTEGER {
noFault(1),
fault(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates system fault state
(state of fault LED/signaling contact)."
::= { snMspsReport 1 }
snMspsSignalledFaults OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of signaled faults."
::= { snMspsReport 2 }
snMspsFaultValue OBJECT-TYPE
SYNTAX BITS {
power(0),
linkdown(1),
internal-error(2),
standby(3),
rm(4),
fmp(5),
reserved6(6),
reserved7(7),
linkup(8),
loopd(9),
reserved10(10),
reserved11(11),
reserved12(12),
reserved13(13),
reserved14(14),
mrp-interconnection(15),
observer-error(16),
non-recoverable-ring-error(17),
cplug-error(18),
profinet-error(19),
module-error(20),
fan-module-faulty(21),
wlan-no-free-channels(22),
wlan-card(23),
reserved24(24),
reserved25(25),
reserved26(26),
reserved27(27),
reserved28(28),
reserved29(29),
reserved30(30),
reserved31(31)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Fault value: 0 = no fault,
0. Octet MSB bit 0 = power,
0. Octet bit 1 = linkdown,
0. Octet bit 2 = internal error,
0. Octet bit 3 = standby,
0. Octet bit 4 = rm,
0. Octet bit 5 = fmp,
0. Octet bit 6 = reserved,
0. Octet LSB bit 7 = reserved,
1. Octet MSB bit 8 = linkup,
1. Octet bit 9 = loopd,
1. Octet bit 10 = reserved,
1. Octet bit 11 = reserved,
1. Octet bit 12 = reserved,
1. Octet bit 13 = reserved,
1. Octet bit 14 = reserved,
1. Octet LSB bit 15 = MRP interconnection open,
2. Octet MSB bit 16 = observer error,
2. Octet bit 17 = non-recoverable ring error,
2. Octet bit 18 = c-plug error,
2. Octet bit 19 = PROFINET error,
2. Octet bit 20 = module error,
2. Octet bit 21 = fan module faulty,
2. Octet bit 22 = wlan no free channels,
2. Octet LSB bit 23 = wlan card faulty,
3. Octet MSB bit 24 = reserved,
3. Octet bit 25 = reserved,
3. Octet bit 26 = reserved,
3. Octet bit 27 = reserved,
3. Octet bit 28 = reserved,
3. Octet bit 29 = reserved,
3. Octet bit 30 = reserved,
3. Octet LSB bit 31 = reserved"
::= { snMspsReport 3 }
snMspsPowerSupply1State OBJECT-TYPE
SYNTAX INTEGER {
inactive(1),
active(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "State of power supply line 1."
::= { snMspsReport 4 }
snMspsPowerSupply2State OBJECT-TYPE
SYNTAX INTEGER {
inactive(1),
active(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "State of power supply line 2."
::= { snMspsReport 5 }
snMspsPowerSupply1Mask OBJECT-TYPE
SYNTAX INTEGER {
checked(1),
notChecked(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Mask of power supply line 1."
DEFVAL {notChecked}
::= { snMspsReport 6 }
snMspsPowerSupply2Mask OBJECT-TYPE
SYNTAX INTEGER {
checked(1),
notChecked(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Mask of power supply line 2."
DEFVAL {notChecked}
::= { snMspsReport 7 }
snMspsPowerSupply3Mask OBJECT-TYPE
SYNTAX INTEGER {
checked(1),
notChecked(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Mask of power supply line 3 (PoE)."
DEFVAL {notChecked}
::= { snMspsReport 8 }
snMspsPowerSupply3State OBJECT-TYPE
SYNTAX INTEGER {
inactive(1),
active(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "State of power supply line 3 (PoE)."
::= { snMspsReport 9 }
snMspsSetButtonControlDefaults OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable/disable reset to factory defaults by set select button."
::= { snMspsReport 10 }
snMspsSetButtonControlRm OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable/disable set redundancy master by set select button."
::= { snMspsReport 11 }
snMspsSetButtonControlFaultMask OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable/disable set fault mask by set select button."
::= { snMspsReport 12 }
snMspsReportSyslogStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object is for enabling or disabling SYSLOG in the system."
::= { snMspsReport 13 }
snMspsReportSmtpStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object is for enabling or disabling SMTP in the system."
::= { snMspsReport 14 }
snMspsReportSmsStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object is for enabling or disabling SMS functionality in the system.
Enabling is only supported on devices with corresponding functionality."
::= { snMspsReport 30 }
snMspsReportSignalingContactControl OBJECT-TYPE
SYNTAX INTEGER {
conventional(1),
aligned(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set signalling contact control to conventional or to alligned.
- Conventional: Contact opened when Fault
- Aligned: Contact controlled by snSignalingContactState"
DEFVAL {conventional}
::= { snMspsReport 40 }
snMspsReportSignalingContactState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set state of signalling contact - takes only affect if snSignalingContactControl is set to aligned (2)
- on: contact closed
- off: contact opened"
DEFVAL {off}
::= { snMspsReport 41 }
snMspsFaultResetCounters OBJECT-TYPE
SYNTAX INTEGER {
no-operation(1),
reset(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Reset all fault counters."
::= { snMspsReport 42 }
snMspsPowerSupplyRedundancyMonitor OBJECT-TYPE
SYNTAX INTEGER {
all(1),
l1-l2(2),
l1-l3(3),
l2-l3(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "In case the redundant power supply will be monitored by PROFINET,
the value of this object defines, which power lines
have to be considered.
all(1) - all available power lines will be monitored
l1-l2(2) - only L1 and L2 will be monitored
l1-l3(3) - only L1 and L3 will be monitored
l2-l3(4) - only L2 and L3 will be monitored
This object can only be configured if the device
has more than one power line.
"
DEFVAL {1}
::= { snMspsReport 50 }
snMspsSetButtonControlRestart OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable/disable restart device by set select button."
::= { snMspsReport 54 }
-- --------------------------------------------------------------
-- Report Fault State Sub-Group
-- --------------------------------------------------------------
snMspsReportFaultStateTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsReportFaultStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Fault state table."
::= { snMspsReport 60 }
snMspsReportFaultStateEntry OBJECT-TYPE
SYNTAX SnMspsReportFaultStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Fault state table rows entries."
INDEX { snMspsReportFaultIndex }
::= { snMspsReportFaultStateTable 1 }
SnMspsReportFaultStateEntry ::= SEQUENCE {
snMspsReportFaultIndex Integer32,
snMspsReportFaultStateTimeStamp TimeTicks,
snMspsReportFaultState DisplayString,
snMspsReportFaultStateClear INTEGER
}
snMspsReportFaultIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index of fault state table."
::= { snMspsReportFaultStateEntry 1 }
snMspsReportFaultStateTimeStamp OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The current value of sysUpTime, when
the relevant fault state occurs."
::= { snMspsReportFaultStateEntry 2 }
snMspsReportFaultState OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Fault state."
::= { snMspsReportFaultStateEntry 3 }
snMspsReportFaultStateClear OBJECT-TYPE
SYNTAX INTEGER{
no-operation(0),
delete(1),
not-supported(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Write access using delete(1) leads to
deleting relevant fault state from system. Read access
to this MIB object will return no-operation(0), if this entry
is in initial state. Read access to this MIB object will return
not-supported(2), if this fault state must not be cleared"
::= { snMspsReportFaultStateEntry 4 }
-- --------------------------------------------------------------
-- Report Event Table
-- --------------------------------------------------------------
snMspsReportEventTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsReportEventEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table which contains the targets to
which notifications shall be sent"
::= { snMspsReport 80 }
snMspsReportEventEntry OBJECT-TYPE
SYNTAX SnMspsReportEventEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Different kinds of notifications
can be configured per event."
INDEX { snMspsReportEventIndex }
::= { snMspsReportEventTable 1 }
SnMspsReportEventEntry ::= SEQUENCE {
snMspsReportEventIndex INTEGER,
snMspsReportEventType INTEGER,
snMspsReportEventMail TruthValue,
snMspsReportEventLog TruthValue,
snMspsReportEventTrap TruthValue,
snMspsReportEventSysLog TruthValue,
snMspsReportEventFault TruthValue
}
snMspsReportEventIndex OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The unique index of each event, which has to be configured"
::= { snMspsReportEventEntry 1 }
snMspsReportEventType OBJECT-TYPE
SYNTAX INTEGER {
cold-warm-start(0),
link-change(1),
auth-failure(2),
rmon-alarm(3),
power-change(4),
rm-state-change(5),
stp-rstp-mstp-change(6),
fault-state(7),
standby-state-change(8),
vrrp-state-change(9),
wlan-overlap-ap(10),
wlan-wds(11),
wlan-radar-iterference(12),
wlan-authentication(13),
wlan-authentication-log(14),
loopd-state-change(15),
ipcf-max-station(16),
ipcf-update-time(17),
cyclic-poll-excd(18),
ospf-state-change(19),
ddns-client-logs(22),
system-connection-status(24),
wlan-general(25),
pnac-port-auth-state-change(27),
poe-state-change(28),
digital-in(29),
vpn-tunnel(30),
fmp-state-change(31),
linkcheck-change(32),
cli-script-file-status(33),
secure-ntp(34),
config-change(35),
mrp-interconnection-state-change(36),
service-information(37)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Enables or disables different kinds the occurred events could be processed.
Possible values are:
0 - Cold or Warm start notification
1 - Link change notification
2 - Authentication failure notification
3 - RMON alarm notification
4 - Power change notification
5 - RM state change notification
6 - Spanning Tree notification
7 - Fault notification
8 - Standby state change notification
9 - VRRP state change notification
10 - Wireless overlap AP events
11 - Wireless WDS events
12 - Wireless radar intereference detection
13 - Wireless authentication events
14 - Wireless authentiction log
15 - Loop Detection state change notification
16 - iPCF PROFINET max. Station
17 - iPCF PROFINET max. Update Time
18 - iPCF PROFINET Cyclic Poll Size Excd.
19 - OSPF state change notification
25 - Wireless General
27 - PNAC port authentication state change event
28 - PoE state change notification
29 - Digital Input
30 - VPN Tunnel
31 - FMP state change notification
32 - Linkcheck change notification
33 - CLI Script File status notification
34 - Secure NTP
35 - Configuration Change
36 - MRP Interconnection state change notification
37 - Service Information"
::= { snMspsReportEventEntry 2 }
snMspsReportEventMail OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enables/disables mail notification when relevant event
occurs. If this kind of notification is not supported
by event, the write access with true will return
bad value error."
DEFVAL { false }
::= { snMspsReportEventEntry 3 }
snMspsReportEventLog OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enables/disables creating log entry when relevant event
occurs. If this kind of notification is not supported
by event, the write access with true will return
bad value error."
DEFVAL { false }
::= { snMspsReportEventEntry 4 }
snMspsReportEventTrap OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enables/disables sending traps when relevant event occurs.
If this kind of notifi-cation is not supported by event,
the write access with true will return bad value error."
DEFVAL { false }
::= { snMspsReportEventEntry 5 }
snMspsReportEventSysLog OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enables/disables creating syslog entry when relevant event occurs.
If this kind of notification is not supported by event, the write
access with true will return bad value error."
DEFVAL { false }
::= { snMspsReportEventEntry 6 }
snMspsReportEventFault OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enables/disables fault notification when relevant event occurs.
If this kind of notification is not supported by event, the write
access with true will return bad value error."
DEFVAL { false }
::= { snMspsReportEventEntry 7 }
-- --------------------------------------------------------------
-- Report Severity Table
-- --------------------------------------------------------------
snMspsReportSeverityTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsReportSeverityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table which contains the severity levels for given client types"
::= { snMspsReport 85 }
snMspsReportSeverityEntry OBJECT-TYPE
SYNTAX SnMspsReportSeverityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Different kinds of severities
can be configured per client type."
INDEX { snMspsReportSeverityIndex }
::= { snMspsReportSeverityTable 1 }
SnMspsReportSeverityEntry ::= SEQUENCE {
snMspsReportSeverityIndex INTEGER,
snMspsReportSeverityClientType INTEGER,
snMspsReportSeveritySeverity INTEGER
}
snMspsReportSeverityIndex OBJECT-TYPE
SYNTAX INTEGER(0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The unique index of each event, which has to be configured with a severity"
::= { snMspsReportSeverityEntry 1 }
snMspsReportSeverityClientType OBJECT-TYPE
SYNTAX INTEGER {
log(1),
mail(2),
syslog(3),
sms(4),
wlan-authlog(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The client type of the entry"
::= { snMspsReportSeverityEntry 2 }
snMspsReportSeveritySeverity OBJECT-TYPE
SYNTAX INTEGER {
emergency(0),
alert(1),
critical(2),
error(3),
warning(4),
notice(5),
info(6),
debug(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The severity level of the given client type"
::= { snMspsReportSeverityEntry 3 }
-- --------------------------------------------------------------
-- Service information
-- --------------------------------------------------------------
snMspsReportServiceInformation OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..512))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "Description of service information"
::= { snMspsReport 90 }
-- ---------------------------------------------
-- MIB module-specific TRAP definitions
-- (SN-MSPS-REPORT-MIB)
-- ---------------------------------------------
snMspsTrapPowerLine1Down NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"Power down on line L1."
::= { snMspsTrapPrefix 1851 }
snMspsTrapPowerLine1Up NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"Power up on line L1."
::= { snMspsTrapPrefix 1852 }
snMspsTrapPowerLine2Down NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"Power down on line L2."
::= { snMspsTrapPrefix 1853 }
snMspsTrapPowerLine2Up NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"Power up on line L2."
::= { snMspsTrapPrefix 1854 }
snMspsTrapChangedFaultState NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"Device changed fault state."
::= { snMspsTrapPrefix 1855 }
snMspsTrapPoEDown NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"Power down on line L3 (PoE)."
::= { snMspsTrapPrefix 1856 }
snMspsTrapPoEUp NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"Power up on line L3 (PoE)."
::= { snMspsTrapPrefix 1857 }
snMspsTrapEnvData NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"EnvData Warnings."
::= { snMspsTrapPrefix 1860 }
snMspsTrapServiceInformation NOTIFICATION-TYPE
OBJECTS { snMspsReportServiceInformation }
STATUS current
DESCRIPTION "Serivce Information."
::= { snMspsTrapPrefix 1861 }
snMspsTrapCLIScriptFileStatus NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"This trap is generated when a CLI script file was successfully loaded via TFTP and the file transfer was triggered through DHCP Options 66/67"
::= { snMspsTrapPrefix 1862 }
snMspsTrapConfigurationChange NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"Informs user when configuration is changed"
::= { snMspsTrapPrefix 1863 }
-- snMspsSyslogClient 1 reserved
snMspsSyslogTimeStamp OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Currently this object is not used. Timestamp is a mandatory field
in Syslog Message format"
DEFVAL { enable }
::= { snMspsSyslogClient 2 }
snMspsSyslogConsoleLog OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is for enabling or disabling the console log option.
When enabled, the messages (log and email alert messages) sent to
the server will be displayed in the console also.
When disabled,the messages will just be sent to the servers and not
be displayed in the console."
DEFVAL { enable }
::= { snMspsSyslogClient 3 }
snMspsSyslogSysBuffers OBJECT-TYPE
SYNTAX Integer32 (1..200)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of log buffers to be allocated in the system"
DEFVAL { 50 }
::= { snMspsSyslogClient 4 }
snMspsSyslogSmtpPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the mail server Port to be used for sending email alerts.
By default the the port is 25"
::= { snMspsSyslogClient 5 }
-- snMspsSyslogConfigTable
-- This table is for configuring the log level options for the module.
snMspsSyslogConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsSyslogConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table for configuring module specific log levels."
::= { snMspsSyslogClient 6 }
snMspsSyslogConfigEntry OBJECT-TYPE
SYNTAX SnMspsSyslogConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing logging level options for a particular module."
INDEX { snMspsSyslogConfigModule }
::= { snMspsSyslogConfigTable 1 }
SnMspsSyslogConfigEntry ::=
SEQUENCE {
snMspsSyslogConfigModule INTEGER,
snMspsSyslogConfigLogLevel INTEGER
}
snMspsSyslogConfigModule OBJECT-TYPE
SYNTAX INTEGER (1..100)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies the module for which the log level option has to be
configured."
::= { snMspsSyslogConfigEntry 1 }
snMspsSyslogConfigLogLevel OBJECT-TYPE
SYNTAX INTEGER{
emergency(0), -- For logging messages that
-- are equivalent to panic
-- condition.
alert(1), -- For logging messages that
-- require immediate attention.
critical(2), -- For logging critical errors.
error(3), -- For logging error messages.
warning(4), -- For logging warning messages.
notice(5), -- For logging messages that
-- require attention
-- and not errors.
info(6), -- For logging informational
-- messages.
debug(7) -- For logging debug messages.
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the log level option to be set for a specific module."
::= { snMspsSyslogConfigEntry 2 }
snMspsSyslogFacility OBJECT-TYPE
SYNTAX INTEGER {
local0(128), -- Reserved local use
local1(136), -- Reserved local use
local2(144), -- Reserved local use
local3(152), -- Reserved local use
local4(160), -- Reserved local use
local5(168), -- Reserved local use
local6(176), -- Reserved local use
local7(184) -- Reserved local use
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Syslog standard facilities.
The facility to be used when sending Syslog messages to this server."
DEFVAL { local0 }
::= { snMspsSyslogClient 7 }
--snMspsSyslogRole
--This scalar for configuring syslog role
snMspsSyslogRole OBJECT-TYPE
SYNTAX INTEGER {
device(1),
relay(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Syslog supports two type of roles one is Device and other is Relay
Device can generate and forward the syslog message
Relay can receive , generate and forward the syslog messages
Relay check whether the received packet is as per BSD Syslog format
if not relay makes the message to BSD Syslog format and forward
Default role is device."
DEFVAL { device }
::= { snMspsSyslogClient 8 }
--snMspsSyslogLogFile
--This scalar for enabling local storage
snMspsSyslogLogFile OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Syslog supports storing of syslog messages in the file as configured by admin
This object is used to enable or disable the syslog local storage
By default the local storage option is disabled."
DEFVAL {disable }
::= { snMspsSyslogClient 9 }
--snMspsSyslogMail
--This scalar for enabling mail option
snMspsSyslogMail OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Syslog supports sending syslog message to any mail-id as configured by the admin
This object is used to enable or disable the syslog mail storage
By default the syslog mail option is disabled."
DEFVAL {disable }
::= { snMspsSyslogClient 10 }
--snMspsSyslogProfile
--This scalar for setting the syslog profile.
snMspsSyslogProfile OBJECT-TYPE
SYNTAX INTEGER {
raw(1),
cooked(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Beep supports two types of profile. One is raw other is cooked profile.
This object is used to set the profile for beep
By default the beep profile is raw."
DEFVAL {raw}
::= { snMspsSyslogClient 11 }
--snMspsSyslogRelayPort
--This scalar for setting the syslog port in relay for receiving
--syslog messages from other relay/device.
snMspsSyslogRelayPort OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to configure port in which the relay listens
Irrespective of the transport type, the relay opens the socket
and listen on the port configured here.
By default the relay will listen on port 514."
DEFVAL {514}
::= { snMspsSyslogClient 12}
--snMspsSyslogRelayTransType
--This scalar for setting the syslog relay transport type.
snMspsSyslogRelayTransType OBJECT-TYPE
SYNTAX INTEGER {
udp(1),
tcp(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Relay supports UDP and TCP transport type.When the transport type is configured
as UDP, relay receives syslog messages via UDP socket.When the transport type is
configured as TCP, relay receives syslog message via TCP socket."
DEFVAL {udp}
::= { snMspsSyslogClient 13 }
--snMspsSyslogFileNameOne
-- This Scalar is to configure file name for syslog local storage
snMspsSyslogFileNameOne OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Syslog can store the messages locally in three different files.This scalar is to
get the file name"
::= { snMspsSyslogClient 14 }
--snMspsSyslogFileNameTwo
-- This Scalar is to configure file name for syslog local storage
snMspsSyslogFileNameTwo OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Syslog can store the messages locally in three different files.This scalar is to
get the file name"
::= { snMspsSyslogClient 15 }
--snMspsSyslogFileNameThree
-- This Scalar is to configure file name for syslog local storage
snMspsSyslogFileNameThree OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Syslog can store the messages locally in three different files.This scalar is to
get the file name"
::= { snMspsSyslogClient 16 }
-- snMspsSyslogFileTable
-- This table is for configuring the file table
snMspsSyslogFileTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsSyslogFileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing entries of priority and filename.
Both priority and file name is considered as index "
::= { snMspsSyslogClient 17 }
snMspsSyslogFileEntry OBJECT-TYPE
SYNTAX SnMspsSyslogFileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing entries of priority,file name.
Both priority and file name is considered as index"
INDEX { snMspsSyslogFilePriority, snMspsSyslogFileName }
::= { snMspsSyslogFileTable 1 }
SnMspsSyslogFileEntry ::=
SEQUENCE {
snMspsSyslogFilePriority Integer32,
snMspsSyslogFileName DisplayString,
snMspsSyslogFileRowStatus RowStatus
}
snMspsSyslogFilePriority OBJECT-TYPE
SYNTAX Integer32(0..191)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This Object specifies the priority for which it should be written in file.
Priority value ranges from 0 to 191"
::= { snMspsSyslogFileEntry 1 }
snMspsSyslogFileName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..64))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the file name to which syslog message is written."
::= { snMspsSyslogFileEntry 2 }
snMspsSyslogFileRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object specifies the Status of the File Entry."
::= {snMspsSyslogFileEntry 3}
snMspsSyslogLogSrvAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Currently this object is is not used. Instead snMspsSyslogFwdServerIP
is used for configuring syslog server IP for remote logging. "
::= { snMspsSyslogClient 18 }
-- snMspsSyslogClient 19 reserved
-- snMspsSyslogFwdTable
-- This table is for configuring the Logging server forward table
snMspsSyslogFwdTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsSyslogFwdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing entries of priority,server address type, server address,
port through which it can send and tranport type."
::= { snMspsSyslogClient 20 }
snMspsSyslogFwdEntry OBJECT-TYPE
SYNTAX SnMspsSyslogFwdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing index as priority , server address type and server address."
INDEX { snMspsSyslogFwdPriority,snMspsSyslogFwdAddressType,snMspsSyslogFwdServerIP}
::= { snMspsSyslogFwdTable 1 }
SnMspsSyslogFwdEntry ::=
SEQUENCE {
snMspsSyslogFwdPriority Integer32,
snMspsSyslogFwdAddressType InetAddressType,
snMspsSyslogFwdServerIP InetAddress,
snMspsSyslogFwdPort Integer32,
snMspsSyslogFwdTransType INTEGER,
snMspsSyslogFwdRowStatus RowStatus,
snMspsSyslogFwdTlsSupport INTEGER
}
snMspsSyslogFwdPriority OBJECT-TYPE
SYNTAX Integer32(0..191)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies the priority which is to be forwarded to the desired server.
Priority can take the value from 0 to 191."
::= { snMspsSyslogFwdEntry 1 }
snMspsSyslogFwdAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies the Address type of server.Address type shall be ipv4 or ipv6."
::= { snMspsSyslogFwdEntry 2 }
snMspsSyslogFwdServerIP OBJECT-TYPE
SYNTAX InetAddress(SIZE(4..16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies the ServerIP to which the syslog shall be forwarded."
::= { snMspsSyslogFwdEntry 3 }
snMspsSyslogFwdPort OBJECT-TYPE
SYNTAX Integer32(1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the Port through which it can send the syslog message.
By default the the port is 514"
DEFVAL { 514 }
::= { snMspsSyslogFwdEntry 4 }
snMspsSyslogFwdTransType OBJECT-TYPE
SYNTAX INTEGER {
udp (0),
tcp (1),
beep (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the Transport type using which it can send syslog message.
By default the tranport type is udp"
DEFVAL { udp }
::= { snMspsSyslogFwdEntry 5 }
snMspsSyslogFwdRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The Status of the Fwd Entry."
::= {snMspsSyslogFwdEntry 6}
snMspsSyslogFwdTlsSupport OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is for enabling or disabling the Transport Layer Security(TLS) option."
DEFVAL { disable }
::= { snMspsSyslogFwdEntry 7 }
snMspsSyslogSmtpSrvAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Currently this object is not used. snMspsSyslogMailServAdd is used for
specifing the mail server IP to be used for sending email alerts."
::= { snMspsSyslogClient 21 }
snMspsSyslogSmtpRcvrMailId OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..100))
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Currently this object is not used. snMspsSyslogRxMailId is used for
specifing the receiver mail ID for email alerts."
DEFVAL { "admin@futsoft.com" }
::= { snMspsSyslogClient 22 }
snMspsSyslogSmtpSenderMailId OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..100))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the sender mail ID for email alerts."
::= { snMspsSyslogClient 23 }
-- snMspsSyslogMailTable
-- This table is for configuring the Mail table
snMspsSyslogMailTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsSyslogMailEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing entries of priority,mail server address type,mail
server address and receiver mail id"
::= { snMspsSyslogClient 24 }
snMspsSyslogMailEntry OBJECT-TYPE
SYNTAX SnMspsSyslogMailEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Mail Table contains index as priority , mail server address type and
mail server address."
INDEX { snMspsSyslogMailPriority, snMspsSyslogMailServAddType , snMspsSyslogMailServAdd }
::= { snMspsSyslogMailTable 1 }
SnMspsSyslogMailEntry ::=
SEQUENCE {
snMspsSyslogMailPriority Integer32,
snMspsSyslogMailServAddType InetAddressType,
snMspsSyslogMailServAdd InetAddress,
snMspsSyslogRxMailId DisplayString,
snMspsSyslogMailRowStatus RowStatus,
snMspsSyslogMailPort Unsigned32,
snMspsSyslogMailSender DisplayString,
snMspsSyslogMailUsername DisplayString,
snMspsSyslogMailPassword DisplayString,
snMspsSyslogMailSecurity INTEGER
}
snMspsSyslogMailPriority OBJECT-TYPE
SYNTAX Integer32(0..191)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies the priority which is to be mailed.
Priority can be in the range 0 to 191"
::= { snMspsSyslogMailEntry 1 }
snMspsSyslogMailServAddType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies the Mail Server Address Type.
Address type can be ipv4 or ipv6"
::= { snMspsSyslogMailEntry 2 }
snMspsSyslogMailServAdd OBJECT-TYPE
SYNTAX InetAddress(SIZE(4..16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies the Mail Server ip.
Server Address can be ipv4 or ipv6"
::= { snMspsSyslogMailEntry 3 }
snMspsSyslogRxMailId OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..100))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Currently this object is not used. snMspsSyslogMailReceiverTable is used for
specifing the receiver mail ID for email alerts"
::= { snMspsSyslogMailEntry 4 }
snMspsSyslogMailRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies RowStatus of the Mail Entry."
::= {snMspsSyslogMailEntry 5}
snMspsSyslogMailPort OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the port of the Mail Entry.
By default the port is 25"
DEFVAL { 25 }
::= {snMspsSyslogMailEntry 8}
snMspsSyslogMailSender OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..100))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the sender mail ID for the Mail Entry."
::= { snMspsSyslogMailEntry 11 }
snMspsSyslogMailUsername OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the username for the Mail Entry."
::= { snMspsSyslogMailEntry 14 }
snMspsSyslogMailPassword OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the password for the Mail Entry."
::= { snMspsSyslogMailEntry 17 }
snMspsSyslogMailSecurity OBJECT-TYPE
SYNTAX INTEGER {
none(0),
ssltls(1),
starttls(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the security for the Mail Entry."
DEFVAL { 1 }
::= { snMspsSyslogMailEntry 20 }
-- snMspsSyslogMailReceiverTable
-- This table is for configuring the Mail receiver table
snMspsSyslogMailReceiverTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsSyslogMailReceiverEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing receiver entries for mail service"
::= { snMspsSyslogClient 25 }
snMspsSyslogMailReceiverEntry OBJECT-TYPE
SYNTAX SnMspsSyslogMailReceiverEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Mail receiver table contains index as priority , mail server address type,
mail server address and Index."
INDEX {
snMspsSyslogMailReceiverServerPriority,
snMspsSyslogMailReceiverServerAddressType,
snMspsSyslogMailReceiverServerAddress,
snMspsSyslogMailReceiverIndex
}
::= { snMspsSyslogMailReceiverTable 1 }
SnMspsSyslogMailReceiverEntry ::=
SEQUENCE {
snMspsSyslogMailReceiverServerPriority Integer32,
snMspsSyslogMailReceiverServerAddressType InetAddressType,
snMspsSyslogMailReceiverServerAddress InetAddress,
snMspsSyslogMailReceiverIndex INTEGER,
snMspsSyslogMailReceiverMailAddress DisplayString,
snMspsSyslogMailReceiverEnabled INTEGER,
snMspsSyslogMailReceiverRowStatus RowStatus
}
snMspsSyslogMailReceiverServerPriority OBJECT-TYPE
SYNTAX Integer32(0..191)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object represents snMspsSyslogMailPriority"
::= { snMspsSyslogMailReceiverEntry 1 }
snMspsSyslogMailReceiverServerAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object represents snMspsSyslogMailServAddType"
::= { snMspsSyslogMailReceiverEntry 2 }
snMspsSyslogMailReceiverServerAddress OBJECT-TYPE
SYNTAX InetAddress(SIZE(4..16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object represents snMspsSyslogMailServAdd"
::= { snMspsSyslogMailReceiverEntry 3 }
snMspsSyslogMailReceiverIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index variable of snMspsSyslogMailReceiverTable."
::= { snMspsSyslogMailReceiverEntry 4 }
snMspsSyslogMailReceiverMailAddress OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..100))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used for
specifing the receiver mail ID for email alerts"
::= { snMspsSyslogMailReceiverEntry 5 }
snMspsSyslogMailReceiverEnabled OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object informs whether the entry is active or inactive"
DEFVAL {disable }
::= { snMspsSyslogMailReceiverEntry 6 }
snMspsSyslogMailReceiverRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies RowStatus of the Receiver Entry."
::= {snMspsSyslogMailReceiverEntry 100}
TunnelStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"To specify how to handle the L2 protocol packets received on a
particular port.
When the option is set to 'peer', the L2 protocol packets received
on a particular port will be processed in the Bridge.
When the option is set to 'tunnel', the L2 protocol packets received
on a particular port will be transparently transmitted in the provider
network and will not be processed in the Provider Bridges/Provider Edge
Bridges.
When the option is set to 'discard', the L2 protocol packets
received over a particular port will not be processed and discarded."
SYNTAX INTEGER { peer(1), tunnel(2), discard(3) }
-- -------------------------------------------------------------
-- Dynamic Group Registration Table
-- -------------------------------------------------------------
-- snMspsVlan 1-3 reserved
snMspsDot1qTpGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDot1qTpGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing filtering information for VLANs
configured into the bridge by (local or network)
management, or learnt dynamically, specifying the set of
ports to which frames received on a VLAN for this FDB
and containing a specific Group destination address are
allowed to be forwarded. This table maintains context ID
as one more index to support Multiple Instances."
::= { snMspsVlan 4 }
snMspsDot1qTpGroupEntry OBJECT-TYPE
SYNTAX SnMspsDot1qTpGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Filtering information configured into the bridge by
management, or learnt dynamically, specifying the set of
ports to which frames received on a VLAN and containing
a specific Group destination address, are allowed to be
forwarded. The subset of these ports learnt dynamically
is also provided."
INDEX { dot1qVlanIndex, snMspsDot1qTpGroupAddress, snMspsDot1qTpPort }
::= { snMspsDot1qTpGroupTable 1 }
SnMspsDot1qTpGroupEntry ::=
SEQUENCE { snMspsDot1qTpGroupAddress MacAddress,
snMspsDot1qTpPort Integer32,
snMspsDot1qTpGroupIsLearnt TruthValue }
snMspsDot1qTpGroupAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The destination Group MAC address in a frame to which
this entry's filtering information applies."
::= { snMspsDot1qTpGroupEntry 1 }
snMspsDot1qTpPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port number of the port for which this entry applies."
::= { snMspsDot1qTpGroupEntry 2 }
snMspsDot1qTpGroupIsLearnt OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the port is statically configured or a
dynamic member of the Group address learnt through GMRP."
::= { snMspsDot1qTpGroupEntry 3 }
-- -------------------------------------------------------------
-- END OF Dynamic Group Registration Table
-- -------------------------------------------------------------
-- snMspsVlan 5-7 reserved
snMspsDot1qVlanStaticPortConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDot1qVlanStaticPortConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing the information of tagged, untagged
and forbidden ports for each VLAN."
::= { snMspsVlan 8 }
snMspsDot1qVlanStaticPortConfigEntry OBJECT-TYPE
SYNTAX SnMspsDot1qVlanStaticPortConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Forwarding information about a port, Whether it is a
member or a forbidden member."
INDEX { dot1qVlanIndex, snMspsDot1qTpPort }
::= { snMspsDot1qVlanStaticPortConfigTable 1 }
SnMspsDot1qVlanStaticPortConfigEntry ::=
SEQUENCE {
snMspsDot1qVlanStaticPort
INTEGER
}
snMspsDot1qVlanStaticPort OBJECT-TYPE
SYNTAX INTEGER {
addTagged(1),
addUntagged(2),
addForbidden(3),
delTagged(4),
delUntagged(5),
delForbidden(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether the port is a member or a forbidden
member in the forwarding information for this VLAN.
'addTagged' - to add the port in the tagged portlist.
'addUntagged' - to add the port in the untagged portlist.
'addForbidden' - to add the port in the forbidden portlist.
'delTagged' - to delete the port from the tagged portlist.
'delUntagged' - to delete the port from the untagged portlist.
'delForbidden' - to delete the port from the forbidden portlist."
REFERENCE
"IEEE 802.1Q/D11 Section 12.10.2.1"
::= { snMspsDot1qVlanStaticPortConfigEntry 1 }
snMspsDot1qStaticAllowedToGoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDot1qStaticAllowedToGoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing the information of AllowedToGoTo
ports for each static unicast entry. This table
maintains context ID as one more index to support
Multiple Instances."
REFERENCE
"IEEE 802.1Q/D11 Table 8-5, ISO/IEC 15802-3 Table 7-5"
::= { snMspsVlan 9 }
snMspsDot1qStaticAllowedToGoEntry OBJECT-TYPE
SYNTAX SnMspsDot1qStaticAllowedToGoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a port, Whether it is an AllowedToGoTo
member or not."
INDEX {
dot1qFdbId,
dot1qStaticUnicastAddress,
dot1qStaticUnicastReceivePort,
snMspsDot1qTpPort
}
::= { snMspsDot1qStaticAllowedToGoTable 1 }
SnMspsDot1qStaticAllowedToGoEntry ::=
SEQUENCE { snMspsDot1qStaticAllowedIsMember TruthValue }
snMspsDot1qStaticAllowedIsMember OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether the port is an allowedToGoTo member."
REFERENCE
"IEEE 802.1Q/D11 Table 8-5, ISO/IEC 15802-3 Table 7-5"
::= { snMspsDot1qStaticAllowedToGoEntry 1 }
-- -------------------------------------------------------------
-- The Static (Destination-Address Filtering) Database
-- -------------------------------------------------------------
snMspsMIDot1qStaticUnicastExtnTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsMIDot1qStaticUnicastExtnEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing filtering information for Unicast
MAC addresses for each Filtering Database, configured
into the device by (local or network) management
specifying the set of ports to which frames received
from specific ports and containing specific unicast
destination addresses are allowed to be forwarded. A
value of zero in this table as the port number from
which frames with a specific destination address are
received, is used to specify all ports for which there
is no specific entry in this table for that particular
destination address. Entries are valid for unicast
addresses only. This table maintains context ID as
one more index to support Multiple Instances."
REFERENCE
"IEEE 802.1Q/D11 Section 12.7.7,
ISO/IEC 15802-3 Section 7.9.1"
::= { snMspsVlan 10 }
snMspsMIDot1qStaticUnicastExtnEntry OBJECT-TYPE
SYNTAX SnMspsMIDot1qStaticUnicastExtnEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Filtering information configured into the device by
(local or network) management specifying the set of
ports to which frames received from a specific port and
containing a specific unicast destination address are
allowed to be forwarded."
AUGMENTS { dot1qStaticUnicastEntry }
::= { snMspsMIDot1qStaticUnicastExtnTable 1 }
SnMspsMIDot1qStaticUnicastExtnEntry ::=
SEQUENCE {
snMspsMIDot1qStaticConnectionIdentifier
MacAddress
}
snMspsMIDot1qStaticConnectionIdentifier OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is to associate the backbone MAC address of the
peer backbone edge bridge with customer Mac addresses that
can be reached through the peer backbone edge bridge."
::= { snMspsMIDot1qStaticUnicastExtnEntry 1 }
-- -------------------------------------------------------------
-- END OF The Static (Destination-Address Filtering) Database
-- -------------------------------------------------------------
snMspsDot1qForwardAllStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDot1qForwardAllStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to maintain the status of static
and forbidden portlist required in ForwardAll table
for VLAN. This table maintains context ID as one more
index to support Multiple Instances."
::= { snMspsVlan 11 }
snMspsDot1qForwardAllStatusEntry OBJECT-TYPE
SYNTAX SnMspsDot1qForwardAllStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry to specify the status of static and
forbidden portlist in ForwardAll Table."
INDEX { dot1qVlanIndex }
::= { snMspsDot1qForwardAllStatusTable 1 }
SnMspsDot1qForwardAllStatusEntry ::=
SEQUENCE {
snMspsDot1qForwardAllRowStatus
RowStatus
}
snMspsDot1qForwardAllRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of the PortLists
(Static, Forbidden) used in the forwarding
information of a VLAN (ForwardAll). To fill the
static and forbidden portlist, we have to set the
rowstatus as 'NOT_IN_SERVICE' and set the appropriate
port in the snMspsDot1qForwardUnregPortConfigTable and
set the rowstatus as 'ACTIVE' to make the portlist
available."
::= { snMspsDot1qForwardAllStatusEntry 1 }
snMspsDot1qForwardAllPortConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDot1qForwardAllPortConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing the forwarding information of static
ports and forbidden ports for each VLAN. This table
maintains context ID as one more index to support
Multiple Instances."
REFERENCE
"IEEE 802.1Q/D11 Section 12.7.2, 12.7.7"
::= { snMspsVlan 12 }
snMspsDot1qForwardAllPortConfigEntry OBJECT-TYPE
SYNTAX SnMspsDot1qForwardAllPortConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Forwarding information about a port, Whether it is a
member or a forbidden member."
INDEX { dot1qVlanIndex, snMspsDot1qTpPort }
::= { snMspsDot1qForwardAllPortConfigTable 1 }
SnMspsDot1qForwardAllPortConfigEntry ::=
SEQUENCE {
snMspsDot1qForwardAllPort
INTEGER
}
snMspsDot1qForwardAllPort OBJECT-TYPE
SYNTAX INTEGER {
addMember(1),
addForbidden(2),
delMember(3),
delForbidden(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether the port is a member or a forbidden
member in the forwarding information for this VLAN.
'addMember' - to add the port in the static
member-list.
'addForbidden' - to add the port in the forbidden
member-list.
'delMember' - to remove the port from the static
member-list.
'delForbidden' - to remove the port from the forbidden
member-list."
::= { snMspsDot1qForwardAllPortConfigEntry 1 }
-- snMspsVlan 13-14 reserved
snMspsDot1qForwardUnregStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDot1qForwardUnregStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to maintain the status of static
and forbidden portlist required in ForwardUnreg table
for VLAN. This table maintains context ID as one more
index to support Multiple Instances."
::= { snMspsVlan 15 }
snMspsDot1qForwardUnregStatusEntry OBJECT-TYPE
SYNTAX SnMspsDot1qForwardUnregStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry to specify the status of static and
forbidden portlist in ForwardUnreg table."
INDEX { dot1qVlanIndex }
::= { snMspsDot1qForwardUnregStatusTable 1 }
SnMspsDot1qForwardUnregStatusEntry ::=
SEQUENCE {
snMspsDot1qForwardUnregRowStatus
RowStatus
}
snMspsDot1qForwardUnregRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of the PortLists
(Static, Forbidden) used in the forwarding
information of a VLAN (ForwardUnreg). To fill the
static and forbidden portlist, we have to set the
rowstatus as 'NOT_IN_SERVICE' and set the appropriate
port in the snMspsDot1qForwardUnregPortConfigTable and
set the rowstatus as 'ACTIVE' to make the portlist
available."
::= { snMspsDot1qForwardUnregStatusEntry 1 }
snMspsDot1qForwardUnregPortConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDot1qForwardUnregPortConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing the information of static ports
and forbidden ports to which forwarding of multicast
group-addressed frames for which there is no more
specific forwarding information applies (per VLAN).
This table maintains context ID as one more index to
support Multiple Instances."
REFERENCE
"IEEE 802.1Q/D11 Section 12.7.2, 12.7.7"
::= { snMspsVlan 16 }
snMspsDot1qForwardUnregPortConfigEntry OBJECT-TYPE
SYNTAX SnMspsDot1qForwardUnregPortConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Forwarding information about a port, Whether it is a
member or a forbidden member."
INDEX {dot1qVlanIndex, snMspsDot1qTpPort }
::= { snMspsDot1qForwardUnregPortConfigTable 1 }
SnMspsDot1qForwardUnregPortConfigEntry ::=
SEQUENCE {
snMspsDot1qForwardUnregPort
INTEGER
}
snMspsDot1qForwardUnregPort OBJECT-TYPE
SYNTAX INTEGER {
addMember(1),
addForbidden(2),
delMember(3),
delForbidden(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether the port is a member or a forbidden
member in the forwarding information for this VLAN.
'addMember' - to add the port in the static
member-list.
'addForbidden' - to add the port in the forbidden
member-list.
'delMember' - to remove the port from the static
member-list.
'delForbidden' - to remove the port from the forbidden
member-list."
::= { snMspsDot1qForwardUnregPortConfigEntry 1 }
-- snMspsVlan 17 reserved
snMspsDot1qStaticMcastPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDot1qStaticMcastPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing egress and forbidden ports for
static multicast entry. This table maintains context
ID as one more index to support Multiple Instance."
::= { snMspsVlan 18 }
snMspsDot1qStaticMcastPortEntry OBJECT-TYPE
SYNTAX SnMspsDot1qStaticMcastPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a port, Whether it is a member or
a forbidden member."
INDEX {
dot1qVlanIndex,
dot1qStaticMulticastAddress,
dot1qStaticMulticastReceivePort,
snMspsDot1qTpPort
}
::= { snMspsDot1qStaticMcastPortTable 1 }
SnMspsDot1qStaticMcastPortEntry ::=
SEQUENCE {
snMspsDot1qStaticMcastPort
INTEGER
}
snMspsDot1qStaticMcastPort OBJECT-TYPE
SYNTAX INTEGER {
addMember(1),
addForbidden(2),
delMember(3),
delForbidden(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether the port is a member or a forbidden
member in the static multicast entry.
'addMember' - to add the port in the egress
member-list.
'addForbidden' - to add the port in the forbidden
member-list.
'delMember' - to remove the port from the egress
member-list.
'delForbidden' - to remove the port from the forbidden
member-list."
::= { snMspsDot1qStaticMcastPortEntry 1 }
snMspsDot1qVlanWildCardTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDot1qVlanWildCardEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Wild card vlan (Id : 0xFFF) static filtering information
will be used for all Vlans for which there is no specific
Static filtering exists in dot1qStaticUnicastTable or
dot1qStaticMulticastTable."
::= { snMspsVlan 19 }
snMspsDot1qVlanWildCardEntry OBJECT-TYPE
SYNTAX SnMspsDot1qVlanWildCardEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"WildCard vlan filtering Information configured into device by
management to which frames received from any port and for any
vlan containing this wild card mac address as destination address
and for which there is no static filtering information are allowed
to be forwarded."
INDEX { snMspsDot1qVlanWildCardMacAddress }
::= { snMspsDot1qVlanWildCardTable 1 }
SnMspsDot1qVlanWildCardEntry ::=
SEQUENCE {
snMspsDot1qVlanWildCardMacAddress
MacAddress,
snMspsDot1qVlanWildCardEgressPorts
PortList,
snMspsDot1qVlanWildCardRowStatus
RowStatus
}
snMspsDot1qVlanWildCardMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The destination MAC address in a frame to which this entry's
filtering information applies. This object must take the
value of a Unicast, Multicast or Broadcast address."
::= { snMspsDot1qVlanWildCardEntry 1 }
snMspsDot1qVlanWildCardEgressPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The set of ports to which frames received from a specific port
and destined for dot1qFutureVlanWildCardMacAddress address must
be forwarded, if there is no specific static filtering entry
exist for this MAC."
::= { snMspsDot1qVlanWildCardEntry 2 }
snMspsDot1qVlanWildCardRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The row status of the entry."
::= { snMspsDot1qVlanWildCardEntry 3 }
snMspsMIDot1qVlanWildCardPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsMIDot1qVlanWildCardPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A Table containing ports to which frames received from a specific
port and destined for snMspsMIDot1qVlanWildCardMacAddress must be
forwarded, if there is no specific static filtering entry exist
for this MAC."
::= { snMspsVlan 20 }
snMspsMIDot1qVlanWildCardPortEntry OBJECT-TYPE
SYNTAX SnMspsMIDot1qVlanWildCardPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"WildCard vlan filtering Information configured into device by
management specifying set of ports to which frames received
from any port and for any vlan containing
snMspsMIDot1qVlanWildCardMacAddress mac address as destination
address and for which there is no static filtering information
are allowed to be forwarded."
INDEX { snMspsDot1qVlanWildCardMacAddress,
snMspsDot1qTpPort }
::= { snMspsMIDot1qVlanWildCardPortTable 1 }
SnMspsMIDot1qVlanWildCardPortEntry ::=
SEQUENCE {
snMspsMIDot1qVlanIsWildCardEgressPort
TruthValue
}
snMspsMIDot1qVlanIsWildCardEgressPort OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether the port is an egress port of wildcard entry."
::= { snMspsMIDot1qVlanWildCardPortEntry 1 }
-- SCALAR BEGIN
-- snMspsVlan 21-24 reserved
snMspsDot1qVlanStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative status requested by management for the Vlan
feature. The value enabled(1) indicates that Vlan should be enabled
in the device on all ports. The value disabled(2) indicates that
Vlan should be disabled in the device on all ports. The object can
be set to disabled if and only if, dot1qGvrpStatus and dot1dGmrpStatus
are disabled. The object should NOT be enabled before setting
'dot1qVlanType'.
Setting this object will affect the operational status of the
VLAN module (dot1qFutureVlanOperStatus)."
::= { snMspsVlan 25 }
snMspsDot1qVlanMacBasedOnAllPorts OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is only used to enable/disable the mac based type on all ports
of dot1qVlanPortMacBasedClassification"
::= { snMspsVlan 26 }
snMspsDot1qVlanPortProtoBasedOnAllPorts OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is only used to enable/disable the port protocol based type on all ports
of snMspsDot1qVlanPortPortProtoBasedClassification"
::= { snMspsVlan 27 }
-- snMspsVlan 28 reserved
snMspsDot1qVlanShutdownStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative shutdown status requested by management for Vlan
The value true(1) indicates that Vlan should be shutdown
in the device on all ports. All memory will be released.
The value false(2) indicates that Vlan should be active in the device
on all ports."
DEFVAL { false }
::= { snMspsVlan 29 }
snMspsDot1qVlanBaseBridgeMode OBJECT-TYPE
SYNTAX INTEGER {
dot1dTransparentMode(1),
dot1qVlanMode(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates base bridge mode of the device.
Setting the value to transparent mode will make
switch behave according to IEEE 802.1D implementation.
Setting the value to VLAN mode will make switch behave
according to IEEE 802.1Q implementation"
::= { snMspsVlan 30 }
-- snMspsVlan 31-32 reserved
snMspsDot1qVlanLearningMode OBJECT-TYPE
SYNTAX INTEGER {
ivl(1),
svl(2),
hybrid(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Type of VLAN learning mode.
When the object value is modified, the static
fid-vlan mappings and static unicast entries
need to be reconfigured. Static unicast configurations
associated with old fid will get deleted."
DEFVAL { ivl }
::= { snMspsVlan 33 }
snMspsDot1qVlanHybridTypeDefault OBJECT-TYPE
SYNTAX INTEGER {
ivl(1),
svl(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The default learning mode of the switch if
dot1qVlanLearningMode is hvl (3).
When the object value is modified, the static
fid-vlan mappings and static unicast entries
need to be reconfigured. Static unicast configurations
associated with old fid will get deleted."
DEFVAL { ivl }
::= { snMspsVlan 34 }
snMspsDot1qVlanOperStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational status of the Vlan module.
The value enabled(1) indicates that Vlan module is currently enabled
in the device.
The value disabled(2) indicates that Vlan module is currently disabled
in the device."
::= { snMspsVlan 35 }
snMspsDot1qGvrpOperStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational status of the GVRP module.
The value enabled(1) indicates that GVRP module is currently enabled
in the device.
The value disabled(2) indicates that GVRP module is currently disabled
in the device."
::= { snMspsVlan 36 }
snMspsDot1qGmrpOperStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational status of the GMRP module.
The value enabled(1) indicates that GMRP module is currently enabled
in the device.
The value disabled(2) indicates that GMRP module is currently disabled
in the device."
::= { snMspsVlan 37 }
--snMspsVlan 38-40 reserved
-- ----------------------------------------------------------------------------
-- Vlan Port Table
-- ----------------------------------------------------------------------------
snMspsDot1qVlanPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDot1qVlanPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table containing the port type information."
::= { snMspsVlan 41 }
snMspsDot1qVlanPortEntry OBJECT-TYPE
SYNTAX SnMspsDot1qVlanPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry indicating the type of the port."
INDEX { snMspsDot1qVlanPort }
::= { snMspsDot1qVlanPortTable 1 }
SnMspsDot1qVlanPortEntry ::=
SEQUENCE {
snMspsDot1qVlanPort Integer32,
snMspsDot1qVlanPortType INTEGER,
snMspsDot1qVlanPortMacBasedClassification EnabledStatus,
snMspsDot1qVlanPortPortProtoBasedClassification EnabledStatus,
snMspsDot1qVlanFilteringUtilityCriteria INTEGER,
snMspsDot1qVlanPortProtected TruthValue,
snMspsDot1qVlanPortSubnetBasedClassification EnabledStatus
}
snMspsDot1qVlanPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port number of the port for which this entry applies."
::= { snMspsDot1qVlanPortEntry 1 }
snMspsDot1qVlanPortType OBJECT-TYPE
SYNTAX INTEGER {
accessPort (1),
trunkPort (2),
hybridPort (3),
hostPort (4),
promiscuousPort (5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of the port is by default hybrid port.
When configured as access port, the port can accept and send
only untagged frames.
When configured as a trunk port, port is added as
member of all the existing Vlans and also for any new vlan
created.
When configured as hybrid port, the port can send or accept both
tagged and untagged frames.
hostPort, promiscuousPort are types of port in PVLAN domain.
Behaviour of host port varies based on the secondary vlan to which
it is configured as member port.
If a host port is a member port of an isolated VLAN, traffic from the
host port is sent only to the promiscuous port of the Private VLAN and
the trunk port.
If a host port is a member port of the community VLAN, traffic from the
port can be sent only to other ports of the community VLAN , trunk port
and promiscuous port of the private VLAN.
A host port can be associated with only one secondary vlan and with
the associated primary vlan.
The PVID of host port will be set the ID of the secondary vlan
to which it belongs to.If a host port is member port of primary vlan,
but is not member port of any secondary vlan, then its PVID will be
set to primary vlan id.
When a port is configured as a hostPort or promiscuousPort, ingress
filtering will be enabled on that port. Also ingress filtering
cannot be disabled on hostPort and promiscuousPort.
Promiscuous ports should be configured as member port of primary vlan
and member port of all secondary vlans associated with that
primary vlan.
The PVID of promiscuous port will be set as the ID of the primary
vlan to which it belongs to.
Host and promiscuous ports should be configured as untagged members
of primary/secondary vlans.
When a access/hybrid port is configured as a member port of a
primary/secondary vlan, it becomes a hostPort automatically.
When the type of the port is changed from promiscuous/host to
access/hybrid port, the port gets removed from the associated PVLAN
domain.
Only considered if device supports corresponding functionality,
otherwise set operation will fail with an inconsistentValue error."
DEFVAL { hybridPort }
::= { snMspsDot1qVlanPortEntry 2 }
snMspsDot1qVlanPortMacBasedClassification OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Object to expilicitly enable/disable the Mac based Classification
on port. This can be independently set without
any dependency in available configuration of
snMspsDot1qVlanMacBasedOnAllPorts "
::= { snMspsDot1qVlanPortEntry 3 }
snMspsDot1qVlanPortPortProtoBasedClassification OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Object to expilicitly enable/disable the port and protocol
Classification on port. This can be independently set without
any dependency in available configuration of
snMspsDot1qVlanPortProtoBasedOnAllPorts "
::= { snMspsDot1qVlanPortEntry 4 }
snMspsDot1qVlanFilteringUtilityCriteria OBJECT-TYPE
SYNTAX INTEGER {
default (1),
enhanced (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Based on this object, learning on a port is decided.
If default filtering utility Criteria is selected on a port, then
learning of source mac from a received packet on that port will be
done only if there is atleast on member port in that vlan.
If enhanced filtering utility criteria is selected on a port,then
learning of source mac from a received packet on that port will be
done if the following are satisfied:
- if at least one VLAN that uses the FID includes the reception
Port and at least one other Port with a Port State of Learning or
Forwarding in its member set, and:
o The operPointToPointMAC parameter is false for the reception Port; or
o Ingress to the VLAN is permitted through a third Port.
The third port can, but is not required to, be in the member set."
DEFVAL { default }
::= { snMspsDot1qVlanPortEntry 5 }
snMspsDot1qVlanPortProtected OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Split Horizon property of the port. If set to true, frames that
are received on any other port that has the same property set to true,
will not be forwarded on this port."
DEFVAL { false }
::= { snMspsDot1qVlanPortEntry 6 }
snMspsDot1qVlanPortSubnetBasedClassification OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Object to expilicitly enable/disable the Subnet based Vlan Classification
on port. This can be independently set without any dependency in
available configuration of snMspsDot1qVlanSubnetBasedOnAllPorts. This
object is not used in case of BCM chipsets."
::= { snMspsDot1qVlanPortEntry 7 }
-- ----------------------------------------------------------------------------
-- END OF Vlan Port Table
-- ----------------------------------------------------------------------------
-- ----------------------------------------------------------------------------
-- Vlan Mac Map Table
-- ----------------------------------------------------------------------------
snMspsDot1qVlanPortMacMapTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDot1qVlanPortMacMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains information on Vlan-MAC address
mapping."
::= { snMspsVlan 42 }
snMspsDot1qVlanPortMacMapEntry OBJECT-TYPE
SYNTAX SnMspsDot1qVlanPortMacMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry that contains Vlan-MAC address mapping."
INDEX { snMspsDot1qVlanPort, snMspsDot1qVlanPortMacMapAddr }
::= { snMspsDot1qVlanPortMacMapTable 1 }
SnMspsDot1qVlanPortMacMapEntry ::=
SEQUENCE {
snMspsDot1qVlanPortMacMapAddr MacAddress,
snMspsDot1qVlanPortMacMapVid VlanId,
snMspsDot1qVlanPortMacMapName DisplayString,
snMspsDot1qVlanPortMacMapMcastBcastOption INTEGER,
snMspsDot1qVlanPortMacMapRowStatus RowStatus
}
snMspsDot1qVlanPortMacMapAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Mac address for which the Vlan mapping is present in the entry."
::= { snMspsDot1qVlanPortMacMapEntry 1 }
snMspsDot1qVlanPortMacMapVid OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Vlan to which the mac address of this entry is mapped to."
::= { snMspsDot1qVlanPortMacMapEntry 2 }
snMspsDot1qVlanPortMacMapName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The name given to the mac-vlan entry."
::= { snMspsDot1qVlanPortMacMapEntry 3 }
snMspsDot1qVlanPortMacMapMcastBcastOption OBJECT-TYPE
SYNTAX INTEGER { allow(1), suppress(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configurable option for discarding/allowing Multicast/Broadcast Untagged
frames. The value allow (1) indicates that Multicast/Broadcast frames
with source Mac address as in the Mac Vlan entry will be dropped if mac
based vlan is enabled on that port.The value suppress (2) indicates that
Multicast/Broadcast frames with source Mac address as in the Mac Vlan
entry will be processed if mac based vlan is enabled on that port"
DEFVAL { allow }
::= { snMspsDot1qVlanPortMacMapEntry 4 }
snMspsDot1qVlanPortMacMapRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The row status of the entry."
::= { snMspsDot1qVlanPortMacMapEntry 5 }
-- ----------------------------------------------------------------------------
-- END OF Vlan Mac Map Table
-- ----------------------------------------------------------------------------
-- ----------------------------------------------------------------------------
-- Vlan Vlan-Fid Map Table
-- ----------------------------------------------------------------------------
snMspsDot1qVlanFidMapTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDot1qVlanFidMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains information about the Filtering database identifier
(FID) used by vlan's to make forwarding decisions. Vlan's can be mapped
to use the same FID to share filtering information among them. This will
cause the mapped vlan's to operate in shared vlan learning (SVL) mode.
Vlan's mapped to a unique FID will operate in independent vlan learning
mode (IVL). A SET operation on this table is allowed only when
snMspsDotVlanLearningMode is hybrid. By default all vlan's will be
mapped to the FID equal to their vlan id when
snMspsDotVlanHybridTypeDefault is IVL. If the value of
snMspsDotVlanHybridTypeDefault is SVL all vlan's are mapped to
filtering database id 1."
::= { snMspsVlan 43 }
snMspsDot1qVlanFidMapEntry OBJECT-TYPE
SYNTAX SnMspsDot1qVlanFidMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry mapping VlanId to Filtering database id."
INDEX { snMspsDot1qVlanIndex }
::= { snMspsDot1qVlanFidMapTable 1 }
SnMspsDot1qVlanFidMapEntry ::=
SEQUENCE {
snMspsDot1qVlanIndex Unsigned32,
snMspsDot1qVlanFid Unsigned32
}
snMspsDot1qVlanIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VLAN ID for which filtering database information is available."
::= { snMspsDot1qVlanFidMapEntry 1 }
snMspsDot1qVlanFid OBJECT-TYPE
SYNTAX Unsigned32 (1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Filtering database id (FID) that will be used by the vlan."
::= { snMspsDot1qVlanFidMapEntry 2 }
-- ----------------------------------------------------------------------------
-- END OF Vlan Vlan-Fid Map Table
-- ----------------------------------------------------------------------------
snMspsDot1qVlanCounterTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDot1qVlanCounterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table contains the statistics on a per VLAN basis.
It contains number of unicast, broadcast and unknown unicast
packets flooded per VLAN."
::= { snMspsVlan 44 }
snMspsDot1qVlanCounterEntry OBJECT-TYPE
SYNTAX SnMspsDot1qVlanCounterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry contains the VLAN statistics"
INDEX { snMspsDot1qVlanIndex }
::= { snMspsDot1qVlanCounterTable 1 }
SnMspsDot1qVlanCounterEntry ::=
SEQUENCE {
snMspsDot1qVlanCounterRxUcast Counter32,
snMspsDot1qVlanCounterRxMcastBcast Counter32,
snMspsDot1qVlanCounterTxUnknUcast Counter32,
snMspsDot1qVlanCounterTxUcast Counter32,
snMspsDot1qVlanCounterTxBcast Counter32
}
snMspsDot1qVlanCounterRxUcast OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Number of unicast packets received in this VLAN."
::= { snMspsDot1qVlanCounterEntry 1 }
snMspsDot1qVlanCounterRxMcastBcast OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Number of multicast/broadcast packets received in this VLAN."
::= { snMspsDot1qVlanCounterEntry 2 }
snMspsDot1qVlanCounterTxUnknUcast OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Number of unknown unicast packets flooded in this VLAN."
::= { snMspsDot1qVlanCounterEntry 3 }
snMspsDot1qVlanCounterTxUcast OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Number of known unicast packets forwarded in this VLAN."
::= { snMspsDot1qVlanCounterEntry 4 }
snMspsDot1qVlanCounterTxBcast OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Number of broadcast packets forwarded in this VLAN."
::= { snMspsDot1qVlanCounterEntry 5 }
snMspsDot1qVlanUnicastMacControlTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDot1qVlanUnicastMacControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing per VLAN Unicast MAC address control information.
The control information includes the status of unicast MAC address
learning as well as restricting the number of unique entries learnt to
a specified limit for the specified VLAN."
::= { snMspsVlan 45 }
snMspsDot1qVlanUnicastMacControlEntry OBJECT-TYPE
SYNTAX SnMspsDot1qVlanUnicastMacControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information controlling the number of distinct unicast MAC addresses
that can be learnt by a VLAN depending on whether learning is enabled
or disabled for the specified VLAN."
INDEX { snMspsDot1qVlanIndex }
::= { snMspsDot1qVlanUnicastMacControlTable 1 }
SnMspsDot1qVlanUnicastMacControlEntry ::=
SEQUENCE {
snMspsDot1qVlanUnicastMacLimit Unsigned32,
snMspsDot1qVlanAdminMacLearningStatus EnabledStatus,
snMspsDot1qVlanOperMacLearningStatus EnabledStatus
}
snMspsDot1qVlanUnicastMacLimit OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Limiting value on the number of distinct unicast MAC addresses
learnt in a VLAN. The lower limit and upper limit value that
can be SET for this object is determined by the underlying hardware."
::= { snMspsDot1qVlanUnicastMacControlEntry 1 }
snMspsDot1qVlanAdminMacLearningStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A Truth value used to configure the unicast MAC learning Admin status
for the VLAN to either be enabled (1) or disabled (2)."
DEFVAL { enabled }
::= { snMspsDot1qVlanUnicastMacControlEntry 2 }
snMspsDot1qVlanOperMacLearningStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A Truth value indicating the unicast MAC learning enabled/disabled
Operational status for the specified VLAN.
If the VLAN does not have any member port, then the Mac Learning
Status for this VLAN will always be disabled, otherwise
The Mac Learning status for this VLAN will take value from Admin Mac
Learning status."
::= { snMspsDot1qVlanUnicastMacControlEntry 3 }
snMspsDot1qVlanTpFdbTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDot1qVlanTpFdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An extention to the dot1qTpFdbTable contains information
about unicast entries only learned via pseudowire
for which the device has forwarding and/or filtering
information. This information is used by the
transparent bridging function in determining how to
propagate a received frame."
REFERENCE
""
::= { snMspsVlan 46 }
snMspsDot1qVlanTpFdbEntry OBJECT-TYPE
SYNTAX SnMspsDot1qVlanTpFdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about the pseudowire on which MAC address was
learned"
AUGMENTS { dot1qTpFdbEntry }
::= { snMspsDot1qVlanTpFdbTable 1 }
SnMspsDot1qVlanTpFdbEntry ::=
SEQUENCE {
snMspsDot1qVlanTpFdbPw
Unsigned32,
snMspsDot1qTpOldFdbPort
INTEGER,
snMspsDot1qConnectionIdentifier
MacAddress
}
snMspsDot1qVlanTpFdbPw OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Either the value '0', or the pseudowire number on
which a frame having a source address equal to the value
of the corresponding instance of dot1qTpFdbAddress has
been seen. A value of '0' indicates that the entry was
learned via the layer2 port. Non-zero value indicates
that this value must be used for forwading irrespective
of dot1qTpFdbPort"
::= { snMspsDot1qVlanTpFdbEntry 1 }
snMspsDot1qTpOldFdbPort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is useful for generating the source relearning trap.
When a get is performed on this object, it returns the value of
Zero(0), so that the device walk doesn't break. It indicates the port
through which the mac-address was learnt previously, while generating
the source relearning trap."
::= { snMspsDot1qVlanTpFdbEntry 2 }
snMspsDot1qConnectionIdentifier OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is to associate the backbone MAC address of the peer
backbone edge brige with customer Mac addresses that can be reached
through the peer backbone edge bridge."
::= { snMspsDot1qVlanTpFdbEntry 3 }
snMspsDot1qVlanPriorityTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDot1qVlanPriorityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table to configure VLAN priorization"
::= { snMspsVlan 47 }
snMspsDot1qVlanPriorityEntry OBJECT-TYPE
SYNTAX SnMspsDot1qVlanPriorityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION""
INDEX { snMspsDot1qVlanPriorityVid}
::= {snMspsDot1qVlanPriorityTable 1 }
SnMspsDot1qVlanPriorityEntry ::= SEQUENCE {
snMspsDot1qVlanPriorityVid INTEGER,
snMspsDot1qVlanPriorityEnabled INTEGER,
snMspsDot1qVlanPriority INTEGER,
snMspsDot1qVlanPriorityUpdateTagPriority INTEGER
}
snMspsDot1qVlanPriorityVid OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "VLAN-ID"
::= { snMspsDot1qVlanPriorityEntry 1 }
snMspsDot1qVlanPriorityEnabled OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable/Disable forcing of a given priority for all
frames received on a certain VLAN"
DEFVAL { disabled }
::= { snMspsDot1qVlanPriorityEntry 4 }
snMspsDot1qVlanPriority OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority that is forced for all frames received on a certain VLAN"
DEFVAL {0}
::= { snMspsDot1qVlanPriorityEntry 7 }
snMspsDot1qVlanPriorityUpdateTagPriority OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable/Disable changing VLAN tag priority field with the value 'snMspsDot1qVlanPriority'
on egress packet for all frames received on a certain VLAN
only if 'snMspsDot1qVlanPriorityEnabled' is 'enabled'.
Only considered if device supports corresponding functionality and number of supported VLANs,
otherwise set operation will fail with an inconsistentValue error."
DEFVAL { disabled }
::= { snMspsDot1qVlanPriorityEntry 11 }
snMspsDot1qVlanExt OBJECT IDENTIFIER ::= { snMspsVlan 48 }
-- snMspsDot1qVlanExt 1-19 reserved for scalar
-- ----------------------------------------------------------------------------
-- MSPS Vlan Extension Table
-- ----------------------------------------------------------------------------
snMspsDot1qStVlanExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDot1qStVlanExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An extension to dot1qVlanStaticTable VLAN table.
This table contains the Private Vlan (PVLAN) related
configurations.
Only considered if device supports corresponding functionality,
otherwise any set operation will fail with an inconsistentValue error
and get will return empty.
Entries cannot be created or deleted by user, whenever static vlan
entry created in the table 'dot1qVlanStaticTable' user can configure
corresponding private vlan properties in this table."
::= { snMspsDot1qVlanExt 20 }
snMspsDot1qStVlanExtEntry OBJECT-TYPE
SYNTAX SnMspsDot1qStVlanExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry specifies the Private Vlan configuration done for
a given Vlan."
INDEX { dot1qVlanIndex }
::= { snMspsDot1qStVlanExtTable 1 }
SnMspsDot1qStVlanExtEntry ::=
SEQUENCE {
snMspsDot1qStVlanPVlanType INTEGER,
snMspsDot1qStVlanPrimaryVid VlanIdOrNone
}
snMspsDot1qStVlanPVlanType OBJECT-TYPE
SYNTAX INTEGER {
normal (1),
primary (2),
isolated (3),
community (4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the Private vlan type for this vlan.
normal - Vlan does not belong to any Private VLAN domain.
primary - Primary vlan in a Private VLAN domain.
isolated - Isolated vlan in a Private VLAN domain.
Devices connected to host ports of this vlan, can not
communicate with each other.
For every isolated vlan, one primary vlan id should be
configured.
community - Community Vlan in a Private VLAN domain. Layer 2
behaviour for a community and normal vlan is same.
For every community vlan, one primary vlan id should be
configured.
Configuration of this object is allowed only when VLAN is not
active."
DEFVAL { normal }
::= { snMspsDot1qStVlanExtEntry 1 }
snMspsDot1qStVlanPrimaryVid OBJECT-TYPE
SYNTAX VlanIdOrNone
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the primary vlan assoicated with this
vlan.
For primary and normal vlans, this object will have the value zero
and configuring this object to non-zero value will not be allowed for
them.
For secondary vlans, this object identifies the associated
primary vlan."
DEFVAL { 0 }
::= { snMspsDot1qStVlanExtEntry 2 }
snMspsDot1vObjects OBJECT IDENTIFIER ::= { snMspsVlan 49 }
snMspsDot1vProtocolGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDot1vProtocolGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains mappings from Protocol
Templates to Protocol Group Identifiers used for
Port-and-Protocol-based VLAN Classification."
REFERENCE
"IEEE 802.1v clause 8.6.4"
::= { snMspsDot1vObjects 1 }
snMspsDot1vProtocolGroupEntry OBJECT-TYPE
SYNTAX SnMspsDot1vProtocolGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A mapping from a Protocol Template to a Protocol
Group Identifier."
INDEX { snMspsDot1vProtocolTemplateFrameType,
snMspsDot1vProtocolTemplateProtocolValue,
snMspsDot1vProtocolGroupId}
::= { snMspsDot1vProtocolGroupTable 1 }
SnMspsDot1vProtocolGroupEntry ::=
SEQUENCE {
snMspsDot1vProtocolTemplateFrameType
INTEGER,
snMspsDot1vProtocolTemplateProtocolValue
OCTET STRING,
snMspsDot1vProtocolGroupId
Integer32,
snMspsDot1vProtocolGroupRowStatus
RowStatus
}
snMspsDot1vProtocolTemplateFrameType OBJECT-TYPE
SYNTAX INTEGER {
ethernet (1),
rfc1042 (2),
snap8021H (3),
snapOther (4),
llcOther (5)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The data-link encapsulation format or the
'detagged_frame_type' in a Protocol Template."
REFERENCE
"IEEE 802.1v clause 8.6.2"
::= { snMspsDot1vProtocolGroupEntry 1 }
snMspsDot1vProtocolTemplateProtocolValue OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (2 | 5))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The identification of the protocol above the data-link
layer in a Protocol Template. Depending on the
frame type, the octet string will have one of the
following values:
For 'ethernet', 'rfc1042' and 'snap8021H',
this is the 16-bit (2-octet) IEEE 802.3 Type Field.
For 'snapOther',
this is the 40-bit (5-octet) PID.
For 'llcOther',
this is the 2-octet IEEE 802.2 LSAP pair:
first octet for DSAP and second octet for SSAP."
REFERENCE
"IEEE 802.1v clause 8.6.2"
::= { snMspsDot1vProtocolGroupEntry 2 }
snMspsDot1vProtocolGroupId OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Represents a group of protocols that are associated
together when assigning a VID to a frame."
REFERENCE
"IEEE 802.1v clause 8.6.3, 12.10.2.1"
::= { snMspsDot1vProtocolGroupEntry 3 }
snMspsDot1vProtocolGroupRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry."
::= { snMspsDot1vProtocolGroupEntry 4 }
-- snMspsVlan 50 reserved
snMspsVlanTunnelObjects OBJECT IDENTIFIER ::= { snMspsVlan 51 }
-- TUNNEL SCALAR BEGIN
snMspsVlanTunnelBpduPri OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the default User Priority for all the tunneled Layer 2
BPDU's received on tunnel ports."
DEFVAL { 7 }
::= { snMspsVlanTunnelObjects 1 }
snMspsVlanTunnelStpAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The MAC address to be used for Customer STP BPDUs tunneling.
When STP tunneling is enabled on a port, this MAC address will be
used as the the destination MAC address of the customer BPDUs received.
This is the default behaviour in Provider (Q-in-Q) Bridges and customer
bridges. In case of 802.1ad bridges, this will be done only when the
outgoing port type is proprietary PNP.
Inside a given Network,BPDUs received with this MAC address will be
treated as data packets and not processed. This is the default
behaviour in case of Provider (Q-in-Q) Bridges and customer bridges.
In case of 802.1ad Bridges, when the outgoing port type is not
proprietary PNP, the destination address will be replaced with the
reserved address defined for customer STP BPDU.Otherwise, they will
be treated as data packets.
When the BPDU is sent out of the given Network, this MAC address
will be replaced with the reserved address defined for Customer STP
BPDU. This is done only when when STP protocol tunnel status is set to
Tunnel on the outgoing port.Dropped otherwise."
::= { snMspsVlanTunnelObjects 2 }
snMspsVlanTunnelLacpAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The MAC address to be used for LACP packets tunneling . When
LACP tunneling is enabled on a port, this MAC address will be
used as the the destination MAC address of the LACP packets
received over this port.
LACP packets received with this MAC address will be treated as
data packets and not processed.
When the tunneled LACP packets are sent out of the given Network,
this MAC address will be replaced with the reserved address defined
for LACP packets. This is done only when LACP protocol tunnel status
is set to Tunnel on the outgoing port.Dropped otherwise."
::= { snMspsVlanTunnelObjects 3 }
snMspsVlanTunnelDot1xAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The MAC address to be used for Dot1x packets tunneling.
When Dot1x tunneling is enabled on a port, this MAC address will
be used as the the destination MAC address for the customer Dot1x
packets received with reserved address over this port.
Dot1x packets received with this MAC address will be treated as
data packets and not processed.
When the tunneled Dot1x packets are sent out of the given Network,
this MAC address will be replaced with the reserved address defined
for Dot1x packets. This is done only when Dot1x protocol tunnel
status is set to Tunnel on the outgoing port.Dropped otherwise."
::= { snMspsVlanTunnelObjects 4 }
snMspsVlanTunnelGvrpAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The MAC address to be used for GVRP PDUs tunneling.
When GVRP tunneling is enabled on a port, this MAC address will be
used as the the destination MAC address of the customer GVRP PDUs
received.This is the default behaviour in Provider (Q-in-Q) Bridges and
customer bridges. In case of 802.1ad bridges, this will be done only
when the outgoing port type is proprietary PNP.
Inside a given Network,packets received with this MAC address will be
treated as data packets and not processed. This is the default
behaviour in case of Provider (Q-in-Q) Bridges and customer bridges.
In case of 802.1ad Bridges, when the outgoing port type is not
proprietary PNP, the destination address will be replaced with the
reserved address defined for customer GVRP PDUs.Otherwise, they
will be treated as data packets.
When the GVRP PDU is sent out of the given Network, this MAC address
will be replaced with the reserved address defined for Customer GVRP
PDU. This is done only when when GVRP protocol tunnel status is set to
Tunnel on the outgoing port.Dropped otherwise."
::= { snMspsVlanTunnelObjects 5 }
snMspsVlanTunnelGmrpAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The MAC address to be used for GMRP PDUs tunneling.
When GMRP tunneling is enabled on a port, this MAC address will be
used as the the destination MAC address of the customer GMRP PDUs
received over this port.
Inside a given Network, GMRP PDUs received with this MAC address
will be treated as data packets and not processed.
When the tunneled GMRP PDUs are sent out of the given Network,
this MAC address will be replaced with the reserved address defined
for GMRP PDUs.This is done only when GMRP protocol tunnel status is
set to Tunnel on the outgoing port.Dropped otherwise."
::= { snMspsVlanTunnelObjects 6 }
snMspsVlanTunnelMvrpAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The MAC address to be used for MVRP PDUs tunneling.
When MVRP tunneling is enabled on a port, this MAC address will be
used as the the destination MAC address of the received MVRP PDUs.
Inside a given Network, packets received with this MAC address will be
treated as data packets and not processed. This is the default
behaviour in case of Provider (Q-in-Q) Bridges and customer bridges.
In case of 802.1ad Bridges, when the outgoing port type is not
proprietary PNP, the destination address will be replaced with the
reserved address defined for customer MVRP PDUs.Otherwise, they
will be treated as data packets.
When the MVRP PDU is sent out of the given Network, this MAC address
will be replaced with the reserved address defined for Customer MVRP
PDU. This is done only when when MVRP protocol tunnel status is set to
Tunnel on the outgoing port. Dropped otherwise."
::= { snMspsVlanTunnelObjects 10 }
snMspsVlanTunnelMmrpAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The MAC address to be used for MMRP PDUs tunneling.
When MMRP tunneling is enabled on a port, this MAC address will be
used as the the destination MAC address of the MMRP PDUs received
over this port.
Inside a given Network, MMRP PDUs received with this MAC address
will be treated as data packets and not processed.
When the tunneled MMRP PDUs are sent out of the given Network,
this MAC address will be replaced with the reserved address defined
for MMRP PDUs.This is done only when MMRP protocol tunnel status is
set to Tunnel on the outgoing port.Dropped otherwise."
::= { snMspsVlanTunnelObjects 11 }
snMspsVlanTunnelIgmpAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The MAC address to be used for IGMP packets tunneling . When
IGMP tunneling is enabled on a port, this MAC address will be
used as the the destination MAC address of the IGMP packets
received over this port.
IGMP packets received with this MAC address will be treated as
data packets and not processed.
When the tunneled IGMP packets are sent out of the given Network,
this MAC address will be replaced with the reserved address defined
for IGMP packets. This is done only when IGMP protocol tunnel status
is set to Tunnel on the outgoing port."
::= { snMspsVlanTunnelObjects 12 }
-- TUNNEL SCALAR END
-- ----------------------------------------------------------------------------
-- Vlan Tunnel Table
-- ----------------------------------------------------------------------------
snMspsVlanTunnelTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsVlanTunnelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains information about the tunnel ports. A walk on
this table will show only those interfaces that are configured for
tunneling.
This table is supported only when the Bridge is configured in Provider
Bridge (Q-in-Q) mode."
::= { snMspsVlanTunnelObjects 7 }
snMspsVlanTunnelEntry OBJECT-TYPE
SYNTAX SnMspsVlanTunnelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry indicating the tunnel information of the port."
INDEX { snMspsVlanPort }
::= { snMspsVlanTunnelTable 1 }
SnMspsVlanTunnelEntry ::=
SEQUENCE {
snMspsVlanPort Integer32,
snMspsVlanTunnelStatus EnabledStatus
}
snMspsVlanPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Index value of the port in the system for which this entry
applies. The maximum index value of the port is defined by the
system."
::= { snMspsVlanTunnelEntry 1 }
snMspsVlanTunnelStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether Tunnelling is enabled or disabled on this port.
snMspsVlanTunnelStatus can be set to `enabled` if and only if the
Bridge mode is set to be `Provider Bridge Mode` and VLAN port
type is set to 'accessPort'. Tunnelling can be enabled only on ports
which are in 'dot1x force-authorised' state."
DEFVAL { disabled }
::= { snMspsVlanTunnelEntry 2 }
-- ----------------------------------------------------------------
-- Tunnel protocol configuration table
-- ----------------------------------------------------------------
snMspsVlanTunnelProtocolTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsVlanTunnelProtocolEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains information about the handling (Tunnel/Peer/
Discard)of customer Layer 2 protocols (STP/GVRP/GMRP/LACP/Dot1x/
IGMP/MVRP and MMRP) inside a given network."
::= { snMspsVlanTunnelObjects 8 }
snMspsVlanTunnelProtocolEntry OBJECT-TYPE
SYNTAX SnMspsVlanTunnelProtocolEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry indicating the handling (Tunnel/Peer/Discard) of Layer 2
protocols (STP/GVRP/GMRP/LACP/Dot1x/IGMP/MVRP and MMRP) on this port.
Tunnel Status cannot be set to `tunnel/discard`, if the protocol
is enabled on the port.Exception, Igmp and dot1x should be disabled
globally for setting the tunnel status to `tunnel/discard`."
INDEX { snMspsVlanPort }
::= { snMspsVlanTunnelProtocolTable 1 }
SnMspsVlanTunnelProtocolEntry ::=
SEQUENCE {
snMspsVlanTunnelProtocolDot1x TunnelStatus,
snMspsVlanTunnelProtocolLacp TunnelStatus,
snMspsVlanTunnelProtocolStp TunnelStatus,
snMspsVlanTunnelProtocolGvrp TunnelStatus,
snMspsVlanTunnelProtocolGmrp TunnelStatus,
snMspsVlanTunnelProtocolIgmp TunnelStatus,
snMspsVlanTunnelProtocolMvrp TunnelStatus,
snMspsVlanTunnelProtocolMmrp TunnelStatus
}
snMspsVlanTunnelProtocolDot1x OBJECT-TYPE
SYNTAX TunnelStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object to specify whether to peer/tunnel/discard the Dot1x packets
received on this port."
::= { snMspsVlanTunnelProtocolEntry 1 }
snMspsVlanTunnelProtocolLacp OBJECT-TYPE
SYNTAX TunnelStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object to specify whether to peer/tunnel/discard the LACP packets
received on this port."
::= { snMspsVlanTunnelProtocolEntry 2 }
snMspsVlanTunnelProtocolStp OBJECT-TYPE
SYNTAX TunnelStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object to specify whether to peer/tunnel/discard the STP packets
received on this port."
::= { snMspsVlanTunnelProtocolEntry 3 }
snMspsVlanTunnelProtocolGvrp OBJECT-TYPE
SYNTAX TunnelStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object to specify whether to peer/tunnel/discard the GVRP packets
received on this port."
::= { snMspsVlanTunnelProtocolEntry 4 }
snMspsVlanTunnelProtocolGmrp OBJECT-TYPE
SYNTAX TunnelStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object to specify whether to peer/tunnel/discard the GMRP packets
received on this port."
::= { snMspsVlanTunnelProtocolEntry 5 }
snMspsVlanTunnelProtocolIgmp OBJECT-TYPE
SYNTAX TunnelStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object to specify whether to peer/tunnel/discard the IGMP packets
received on this port."
::= { snMspsVlanTunnelProtocolEntry 6 }
snMspsVlanTunnelProtocolMvrp OBJECT-TYPE
SYNTAX TunnelStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object to specify whether to peer/tunnel/discard the MVRP packets
received on this port."
::= { snMspsVlanTunnelProtocolEntry 7 }
snMspsVlanTunnelProtocolMmrp OBJECT-TYPE
SYNTAX TunnelStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object to specify whether to peer/tunnel/discard the MMRP packets
received on this port."
::= { snMspsVlanTunnelProtocolEntry 8 }
-- ----------------------------------------------------------------
-- Tunnel protocol statistics table
-- ----------------------------------------------------------------
snMspsVlanTunnelProtocolStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsVlanTunnelProtocolStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains statistics information about the tunneled
Layer 2 protocols (STP/GVRP/GMRP/LACP/Dot1x/IGMP/MVRP and MMRP)
received and transmitted over a port."
::= { snMspsVlanTunnelObjects 9 }
snMspsVlanTunnelProtocolStatsEntry OBJECT-TYPE
SYNTAX SnMspsVlanTunnelProtocolStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry indicating the handling (Tunnel/Peer/Discard) of Layer 2
protocols (STP/GVRP/GMRP/LACP/Dot1x/IGMP/MVRP and MMRP) on this port."
INDEX { snMspsVlanPort }
::= { snMspsVlanTunnelProtocolStatsTable 1 }
SnMspsVlanTunnelProtocolStatsEntry ::=
SEQUENCE {
snMspsVlanTunnelProtocolDot1xPktsRecvd Counter32,
snMspsVlanTunnelProtocolDot1xPktsSent Counter32,
snMspsVlanTunnelProtocolLacpPktsRecvd Counter32,
snMspsVlanTunnelProtocolLacpPktsSent Counter32,
snMspsVlanTunnelProtocolStpPDUsRecvd Counter32,
snMspsVlanTunnelProtocolStpPDUsSent Counter32,
snMspsVlanTunnelProtocolGvrpPDUsRecvd Counter32,
snMspsVlanTunnelProtocolGvrpPDUsSent Counter32,
snMspsVlanTunnelProtocolGmrpPktsRecvd Counter32,
snMspsVlanTunnelProtocolGmrpPktsSent Counter32,
snMspsVlanTunnelProtocolIgmpPktsRecvd Counter32,
snMspsVlanTunnelProtocolIgmpPktsSent Counter32,
snMspsVlanTunnelProtocolMvrpPktsRecvd Counter32,
snMspsVlanTunnelProtocolMvrpPktsSent Counter32,
snMspsVlanTunnelProtocolMmrpPktsRecvd Counter32,
snMspsVlanTunnelProtocolMmrpPktsSent Counter32
}
snMspsVlanTunnelProtocolDot1xPktsRecvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of tunneled Dot1x Packets received."
::= { snMspsVlanTunnelProtocolStatsEntry 1 }
snMspsVlanTunnelProtocolDot1xPktsSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of tunneled Dot1x Packets transmitted."
::= { snMspsVlanTunnelProtocolStatsEntry 2 }
snMspsVlanTunnelProtocolLacpPktsRecvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of tunneled LACP Packets received."
::= { snMspsVlanTunnelProtocolStatsEntry 3 }
snMspsVlanTunnelProtocolLacpPktsSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of tunneled LACP packets transmitted."
::= { snMspsVlanTunnelProtocolStatsEntry 4 }
snMspsVlanTunnelProtocolStpPDUsRecvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of tunneled STP PDUs received."
::= { snMspsVlanTunnelProtocolStatsEntry 5 }
snMspsVlanTunnelProtocolStpPDUsSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of tunneled STP PDUs transmitted."
::= { snMspsVlanTunnelProtocolStatsEntry 6 }
snMspsVlanTunnelProtocolGvrpPDUsRecvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of tunneled GVRP PDUs received."
::= { snMspsVlanTunnelProtocolStatsEntry 7 }
snMspsVlanTunnelProtocolGvrpPDUsSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of tunneled GVRP PDUs transmitted."
::= { snMspsVlanTunnelProtocolStatsEntry 8 }
snMspsVlanTunnelProtocolGmrpPktsRecvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of tunneled GMRP PDUs packets received."
::= { snMspsVlanTunnelProtocolStatsEntry 9 }
snMspsVlanTunnelProtocolGmrpPktsSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of tunneled GMRP packets transmitted."
::= { snMspsVlanTunnelProtocolStatsEntry 10 }
snMspsVlanTunnelProtocolIgmpPktsRecvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of tunneled IGMP packets received."
::= { snMspsVlanTunnelProtocolStatsEntry 11 }
snMspsVlanTunnelProtocolIgmpPktsSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of tunneled IGMP packets transmitted."
::= { snMspsVlanTunnelProtocolStatsEntry 12 }
snMspsVlanTunnelProtocolMvrpPktsRecvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MVRPDUs received on a port for which the MVRP tunneling
status is enabled."
::= { snMspsVlanTunnelProtocolStatsEntry 13 }
snMspsVlanTunnelProtocolMvrpPktsSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MVRPDUs transmitted on a port on which the MVRP tunneling
status is enabled."
::= { snMspsVlanTunnelProtocolStatsEntry 14 }
snMspsVlanTunnelProtocolMmrpPktsRecvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MMRPDUs received on a port for which the MMRP tunneling
status is enabled."
::= { snMspsVlanTunnelProtocolStatsEntry 15 }
snMspsVlanTunnelProtocolMmrpPktsSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MMRPDUs transmitted on a port on which the MMRP tunneling
status is enabled."
::= { snMspsVlanTunnelProtocolStatsEntry 16 }
snMspsVlanDiscardObjects OBJECT IDENTIFIER ::= { snMspsVlan 52 }
-- ----------------------------------------------------------------
-- VLAN Discard statistics table
-- ----------------------------------------------------------------
snMspsVlanDiscardStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsVlanDiscardStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains statistics information about the L2 protocol
packets (STP/GVRP/GMRP/LACP/Dot1x/IGMP/MVRP and MMRP) discarded on
reception and transmission side due to 'Discard' tunnel protocol
status."
::= { snMspsVlanDiscardObjects 1 }
snMspsVlanDiscardStatsEntry OBJECT-TYPE
SYNTAX SnMspsVlanDiscardStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry indicating the Discard statistics for L2 protocol packets."
INDEX { snMspsVlanPort }
::= { snMspsVlanDiscardStatsTable 1 }
SnMspsVlanDiscardStatsEntry ::=
SEQUENCE {
snMspsVlanDiscardDot1xPktsRx Counter32,
snMspsVlanDiscardDot1xPktsTx Counter32,
snMspsVlanDiscardLacpPktsRx Counter32,
snMspsVlanDiscardLacpPktsTx Counter32,
snMspsVlanDiscardStpPDUsRx Counter32,
snMspsVlanDiscardStpPDUsTx Counter32,
snMspsVlanDiscardGvrpPktsRx Counter32,
snMspsVlanDiscardGvrpPktsTx Counter32,
snMspsVlanDiscardGmrpPktsRx Counter32,
snMspsVlanDiscardGmrpPktsTx Counter32,
snMspsVlanDiscardIgmpPktsRx Counter32,
snMspsVlanDiscardIgmpPktsTx Counter32,
snMspsVlanDiscardMvrpPktsRx Counter32,
snMspsVlanDiscardMvrpPktsTx Counter32,
snMspsVlanDiscardMmrpPktsRx Counter32,
snMspsVlanDiscardMmrpPktsTx Counter32
}
snMspsVlanDiscardDot1xPktsRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Dot1x packets discarded on the reception side
due to Discard option."
::= { snMspsVlanDiscardStatsEntry 1 }
snMspsVlanDiscardDot1xPktsTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Dot1x packets discarded on the transmission side
due to Discard option."
::= { snMspsVlanDiscardStatsEntry 2 }
snMspsVlanDiscardLacpPktsRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of LACP packets discarded on the reception side
due to Discard option."
::= { snMspsVlanDiscardStatsEntry 3 }
snMspsVlanDiscardLacpPktsTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of LACP packets discarded on the transmission side
due to Discard option."
::= { snMspsVlanDiscardStatsEntry 4 }
snMspsVlanDiscardStpPDUsRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of STP BPDUs discarded on the reception side
due to Discard option."
::= { snMspsVlanDiscardStatsEntry 5 }
snMspsVlanDiscardStpPDUsTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of STP BPDUs discarded on the transmission side
due to Discard option."
::= { snMspsVlanDiscardStatsEntry 6 }
snMspsVlanDiscardGvrpPktsRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of GVRP packets discarded on the reception side
due to Discard option."
::= { snMspsVlanDiscardStatsEntry 7 }
snMspsVlanDiscardGvrpPktsTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of GVRP packets discarded on the transmission side
due to Discard option."
::= { snMspsVlanDiscardStatsEntry 8 }
snMspsVlanDiscardGmrpPktsRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of GMRP packets discarded on the reception side
due to Discard option."
::= { snMspsVlanDiscardStatsEntry 9 }
snMspsVlanDiscardGmrpPktsTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of GMRP packets discarded on the transmission side
due to Discard option."
::= { snMspsVlanDiscardStatsEntry 10 }
snMspsVlanDiscardIgmpPktsRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of IGMP packets discarded on the reception side
due to Discard option."
::= { snMspsVlanDiscardStatsEntry 11 }
snMspsVlanDiscardIgmpPktsTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of IGMP packets discarded on the transmission side
due to Discard option."
::= { snMspsVlanDiscardStatsEntry 12 }
snMspsVlanDiscardMvrpPktsRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MVRP packets discarded on the reception side
due to Discard option."
::= { snMspsVlanDiscardStatsEntry 13 }
snMspsVlanDiscardMvrpPktsTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MVRP packets discarded on the transmission side
due to Discard option."
::= { snMspsVlanDiscardStatsEntry 14 }
snMspsVlanDiscardMmrpPktsRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MMRP packets discarded on the receiption side
due to Discard option."
::= { snMspsVlanDiscardStatsEntry 15 }
snMspsVlanDiscardMmrpPktsTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MMRP packets discarded on the transmission side
due to Discard option."
::= { snMspsVlanDiscardStatsEntry 16 }
-- snMspsVlan 54-55 reserved
snMspsVlanBridgeMode OBJECT-TYPE
SYNTAX INTEGER {
customerBridge (1),
providerBridge (2),
providerEdgeBridge (3),
providerCoreBridge (4),
providerBackoneICompBridge (5),
providerBackoneBCompBridge (6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the Bridge mode of the switch.
Setting this to 'customerBridge' means that the switch will operate
as a 802.1Q VLAN Bridge.
Setting this to 'providerBridge' means that the Bridge will operate as
a normal Q-in-Q Bridge.
Setting this to 'providerCoreBridge' means that the switch will operate
as a 802.1ad compliant provider bridge with only S-VLAN component.
Setting this to 'providerEdgeBridge' means that the switch will operate
as a 802.1ad provider edge bridge with S-VLAN component and atleast
one C-VLAN component.
Setting this to 'providerBackoneICompBridge' means that the switch will operate
as a 802.1ah provider backone bridge as an I component.
Setting this to 'providerBackoneBCompBridge' means that the switch will operate
as a 802.1ah provider backone bridge as a B component.
For changing the bridge mode, GARP and STP modules should be shutdown."
::= { snMspsVlan 56 }
-- ----------------------------------------------------------------------------
-- Vlan Subnet Map Table
-- ----------------------------------------------------------------------------
snMspsDot1qVlanPortSubnetMapTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDot1qVlanPortSubnetMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Subnet based VLAN classification - The source IP-subnet address in
the incoming packets is used to classify VLAN membership.
Subnet based VLAN is applied only on IP/ARP packets.
This table contains information on Subnet-VlanId address mapping.
In case of BCM, the snMspsDot1qVlanPort index should always be 0 since
BCM supports Subnet based VLAN globally (not on per port)"
::= { snMspsVlan 57 }
snMspsDot1qVlanPortSubnetMapEntry OBJECT-TYPE
SYNTAX SnMspsDot1qVlanPortSubnetMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry that contains Vlan-Subnet address mapping."
INDEX { snMspsDot1qVlanPort,
snMspsDot1qVlanPortSubnetMapAddr}
::= { snMspsDot1qVlanPortSubnetMapTable 1 }
SnMspsDot1qVlanPortSubnetMapEntry ::=
SEQUENCE {
snMspsDot1qVlanPortSubnetMapAddr IpAddress,
snMspsDot1qVlanPortSubnetMapVid VlanId,
snMspsDot1qVlanPortSubnetMapARPOption INTEGER,
snMspsDot1qVlanPortSubnetMapRowStatus RowStatus,
snMspsDot1qVlanPortSubnetMapSubnetMask IpAddress
}
snMspsDot1qVlanPortSubnetMapAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Source IP-Subnet address for which the Vlan mapping is present
in the entry."
::= { snMspsDot1qVlanPortSubnetMapEntry 1 }
snMspsDot1qVlanPortSubnetMapVid OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Vlan to which the Source IP-Subnet address of this entry is mapped to."
::= { snMspsDot1qVlanPortSubnetMapEntry 2 }
snMspsDot1qVlanPortSubnetMapARPOption OBJECT-TYPE
SYNTAX INTEGER { allow(1), suppress(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configurable option for discarding/allowing ARP Untagged frames on
the vlan. The value allow (1) indicates that ARP frames with source
IP-subnet address matching the snMspsDot1qVlanPortSubnetMapEntry
will be classified to vlan based on snMspsDot1qVlanPortSubnetMapEntry.
The value suppress (2) indicates that ARP frames with source IP-Subnet
address matching the snMspsDot1qVlanPortSubnetMapEntry will not be
classified to vlan based on snMspsDot1qVlanPortSubnetMapEntry. The
VLAN classification will be based on next subsequent classification
mechanism."
DEFVAL { allow }
::= { snMspsDot1qVlanPortSubnetMapEntry 3 }
snMspsDot1qVlanPortSubnetMapRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The row status of the entry."
::= { snMspsDot1qVlanPortSubnetMapEntry 4 }
snMspsDot1qVlanPortSubnetMapSubnetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Source IP-Subnet Mask for which the Vlan mapping is present
in the entry."
::= { snMspsDot1qVlanPortSubnetMapEntry 5 }
-- ----------------------------------------------------------------------------
-- END OF Vlan Subnet Map Table
-- ----------------------------------------------------------------------------
snMspsDot1qVlanSubnetBasedOnAllPorts OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to enable/disable the subnet based VLAN Classification
on all ports of snMspsDot1qVlanPortSubnetBasedClassification. On setting
this object to enable/disable status, Subnet based VLAN classification
will be enabled/disabled on all the ports."
::= { snMspsVlan 58 }
-- ----------------------------------------------------------------------------
-- Vlan Ipv6 Prefix Map Table
-- ----------------------------------------------------------------------------
snMspsDot1qVlanPortIpv6PrefixMapTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDot1qVlanPortIpv6PrefixMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Ipv6 prefix based VLAN classification - The source Ipv6-prefix address in
the incoming packets is used to classify VLAN membership.
prefix based VLAN is applied only on Ipv6 packets.
This table contains information on Prefix-VlanId address mapping."
::= { snMspsVlan 59 }
snMspsDot1qVlanPortIpv6PrefixMapEntry OBJECT-TYPE
SYNTAX SnMspsDot1qVlanPortIpv6PrefixMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry that contains Vlan-Ipv6 prefix address mapping."
INDEX { snMspsDot1qVlanPort,
snMspsDot1qVlanPortIpv6PrefixMapAddr}
::= { snMspsDot1qVlanPortIpv6PrefixMapTable 1 }
SnMspsDot1qVlanPortIpv6PrefixMapEntry ::=
SEQUENCE {
snMspsDot1qVlanPortIpv6PrefixMapAddr OCTET STRING,
snMspsDot1qVlanPortIpv6PrefixMapAddrLength Integer32,
snMspsDot1qVlanPortIpv6PrefixMapVid VlanId,
snMspsDot1qVlanPortIpv6PrefixMapRowStatus RowStatus
}
snMspsDot1qVlanPortIpv6PrefixMapAddr OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Source Ipv6-prefix address for which the Vlan mapping is present
in the entry."
::= { snMspsDot1qVlanPortIpv6PrefixMapEntry 1 }
snMspsDot1qVlanPortIpv6PrefixMapAddrLength OBJECT-TYPE
SYNTAX Integer32 (1..128)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Source Ipv6-prefix length for which the Vlan mapping is present
in the entry."
::= { snMspsDot1qVlanPortIpv6PrefixMapEntry 2 }
snMspsDot1qVlanPortIpv6PrefixMapVid OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Vlan to which the Source Ipv6-prefix address of this entry is mapped to."
::= { snMspsDot1qVlanPortIpv6PrefixMapEntry 3 }
snMspsDot1qVlanPortIpv6PrefixMapRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The row status of the entry."
::= { snMspsDot1qVlanPortIpv6PrefixMapEntry 4 }
-- ----------------------------------------------------------------------------
-- END OF Vlan Ipv6 Prefix Map Table
-- ----------------------------------------------------------------------------
snMspsDot1qVlanAltMgmtAccessVlanList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the Vlan's in which the Mgmt Ip address can be accessed.
By default the access is not allowed to reside in any vlan.
This entry will only be applicable if there is no L3 Vlan associated with
L2 Vlan."
::= { snMspsVlan 65 }
-- Textual Conventions
PriorityCodePoint ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"To specify the priority code point selection row"
SYNTAX INTEGER {
codePoint8p0d(1),
codePoint7p1d(2),
codePoint6p2d(3),
codePoint5p3d(4)
}
--MIB objects for configuring the IEEE802.1ad Provider Bridging
snMspsDot1adProviderBridge OBJECT IDENTIFIER ::= { snMspsDot1ad 1 }
--Proprietary MIB implementation for the Provider Bridging functionality
snMspsDot1adPbSystem OBJECT IDENTIFIER ::= { snMspsDot1ad 2 }
snMspsDot1adPbConfig OBJECT IDENTIFIER ::= { snMspsDot1ad 3 }
-- -------------------------------------------------------------
-- The 802.1ad Provider Bridge Port Configuration Table
-- -------------------------------------------------------------
snMspsDot1adPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDot1adPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing provider bridge port related configurations.
All the values for the objects in this table will take effect
only when the Bridge Mode is set as
ProviderCoreBridge or ProviderEdgeBridge."
::= { snMspsDot1adProviderBridge 1 }
snMspsDot1adPortEntry OBJECT-TYPE
SYNTAX SnMspsDot1adPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information controlling per port configurations for
the externally accessible ports of Provider Bridges."
INDEX { snMspsDot1adPortNum }
::= { snMspsDot1adPortTable 1 }
SnMspsDot1adPortEntry ::=
SEQUENCE {
snMspsDot1adPortNum Integer32,
snMspsDot1adPortPcpSelectionRow PriorityCodePoint,
snMspsDot1adPortUseDei TruthValue,
snMspsDot1adPortReqDropEncoding TruthValue
}
snMspsDot1adPortNum OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Index value of the port in the system for which this entry
applies. The maximum index value of the port is defined by the
system."
::= { snMspsDot1adPortEntry 1 }
snMspsDot1adPortPcpSelectionRow OBJECT-TYPE
SYNTAX PriorityCodePoint
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The row to be used on this port for PCP encoding and PCP decoding
tables. PCP encoding and PCP decoding on a port will be based on the row
configured as per this mib object for this port. This can be set for all
bride port types."
DEFVAL { 1 }
::= { snMspsDot1adPortEntry 2 }
snMspsDot1adPortUseDei OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object to specify whether drop_eligible parameter in the PCP can be
used for encoding and decoding.
If this object is set to True for the port, then drop_eligible parameter
will be encoded in the DEI of transmitted frames.If the DEI is set in the
S-tag or the PCP decoding table indicates that drop_eligible True,
then drop_eligible will become true for the received frames.
If this object is set to False, the DEI will be transmitted as zero
and ignored on receipt.
This object can be set only on PNPs and external CNPs."
DEFVAL { false }
::= { snMspsDot1adPortEntry 3 }
snMspsDot1adPortReqDropEncoding OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When this object is set to True and if the bridge port can not
encode particular priorities with drop_eligible, then frames queued
with those priorites and drop_eligible true can be discarded and not
transmitted.
This object can be set only on PNPs and external CNPs."
DEFVAL { false }
::= { snMspsDot1adPortEntry 4 }
-- ----------------------------------------------------------------
-- VID Translation Table
-- This is the VID translation table (Ref. IEEE802.1ad/D6 - Section
-- (12.13.2.1)
-- ----------------------------------------------------------------
snMspsDot1adVidTranslationTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDot1adVidTranslationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" This VID Translation table provides a bidirectional mapping between a
Local S-VID and a relay S-VID. This table is applicable only for the
externally accessible network ports (ie) Customer Network Port / Provider
Network Port / Proprietary Customer Network Port."
::= { snMspsDot1adProviderBridge 2 }
snMspsDot1adVidTranslationEntry OBJECT-TYPE
SYNTAX SnMspsDot1adVidTranslationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry contains the information of translating a Local Service Vlan
in the packet to the Relay Service VLAN. This entry shall only be
applicable at Network ports."
INDEX { snMspsDot1adPortNum,
snMspsDot1adVidTranslationLocalVid }
::= { snMspsDot1adVidTranslationTable 1 }
SnMspsDot1adVidTranslationEntry ::=
SEQUENCE {
snMspsDot1adVidTranslationLocalVid VlanId,
snMspsDot1adVidTranslationRelayVid VlanId,
snMspsDot1adVidTranslationRowStatus RowStatus
}
snMspsDot1adVidTranslationLocalVid OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" A Service VLAN Identifier used in the S-Tag of frames transmitted
and received through this customer Network Port / Provider Network Port
/ Proprietary Customer Network Port."
::= { snMspsDot1adVidTranslationEntry 1 }
snMspsDot1adVidTranslationRelayVid OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This Service VLAN identifier used by the filtering and forwarding processes
of the S-VLAN component in the provider bridge. This Vlan is identified for
a given port (CNP/ Prop CNP/ PNP) and the specified Local S-VLAN present in
the frame"
::= { snMspsDot1adVidTranslationEntry 2 }
snMspsDot1adVidTranslationRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is not used when this
object is SET 'notInService'. An entry created in this table is
be deleted when this object is SET 'destroy'.
The Entry in this table is used only when the translation status for a
Port (CNP/ PropCNP/PNP) is enabled and the Row status is SET 'active'."
::= { snMspsDot1adVidTranslationEntry 3 }
-- -------------------------------------------------------------
-- This table is the C-VID Registration table (Ref. Section
-- 12.13.3.1 IEEE802.1ad/D6)
-- -------------------------------------------------------------
snMspsDot1adCVidRegistrationTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDot1adCVidRegistrationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" This table provides a mapping between a customer VLAN Identifier (C-VID)
and service instance represented by Service VLAN identifier(S-VID)
for a customer edge port.
An Entry in this table result in 'cvlan' type of SVLAN classification for
CEP Ports. This can be configured only on Customer Edge Port."
::= { snMspsDot1adProviderBridge 3 }
snMspsDot1adCVidRegistrationEntry OBJECT-TYPE
SYNTAX SnMspsDot1adCVidRegistrationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" An Entry in this table provides functionality of
a) Configuring PVID of the internal Customer Network Port of SVLAN component.
b) Adding PEP on the C-VLAN component to member set of C-VLAN
c) Adding PEP and/or CEP to the untagged set of C-VLAN, if it is desired."
INDEX { snMspsDot1adPortNum,
snMspsDot1adCVidRegistrationCVid
}
::= { snMspsDot1adCVidRegistrationTable 1 }
SnMspsDot1adCVidRegistrationEntry ::=
SEQUENCE {
snMspsDot1adCVidRegistrationCVid VlanId,
snMspsDot1adCVidRegistrationSVid VlanId,
snMspsDot1adCVidRegistrationUntaggedPep TruthValue,
snMspsDot1adCVidRegistrationUntaggedCep TruthValue,
snMspsDot1adCVidRegistrationRowStatus RowStatus
}
snMspsDot1adCVidRegistrationCVid OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The customer VLAN ID in the customer VLAN tag of an ingress frame
at this specified port or the customer VLAN ID to which the ingress
frame is classified to, at this specified port."
::= { snMspsDot1adCVidRegistrationEntry 1 }
snMspsDot1adCVidRegistrationSVid OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"S-VLAN Id for the service instance to which this port and this
C-VLAN are mapped to.
ie) CEP,C-VID ===> S-VID."
::= { snMspsDot1adCVidRegistrationEntry 2 }
snMspsDot1adCVidRegistrationUntaggedPep OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to retain/add/remove the Customer VLAN tag
from the packet, before sending it out of Provider Edge Port (PEP).
When it is set to 'True' the C-VLAN tag will be stripped. Otherwise
the packet will be sent out with a C-tag and with valid C-VID."
DEFVAL { false }
::= { snMspsDot1adCVidRegistrationEntry 3 }
snMspsDot1adCVidRegistrationUntaggedCep OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to retain/add/remove the Customer VLAN tag
from the packet, before sending it out of Customer Edge Port (CEP).
When it is set to 'True' the C-VLAN tag will be stripped. Otherwise
the tag will be added if the packet is C-VLAN untagged."
DEFVAL { false }
::= { snMspsDot1adCVidRegistrationEntry 4 }
snMspsDot1adCVidRegistrationRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in this table is not used when this
object is SET 'notInService'. An entry created in this table is
deleted when this object is SET 'destroy'."
::= { snMspsDot1adCVidRegistrationEntry 5 }
-- ----------------------------------------------------------------
-- Provider Edge Port configuration table (Ref. IEEE802.1ad/D6 - Section
-- 12.13.3.3 and 12.13.3.4)
-- ----------------------------------------------------------------
snMspsDot1adPepTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDot1adPepEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table provides configuration options (PVID,Acceptable
frame type, default user priority and ingress filtering) for the internal
PEP interfaces created when an entry is created in C-VID registration table."
::= { snMspsDot1adProviderBridge 4 }
snMspsDot1adPepEntry OBJECT-TYPE
SYNTAX SnMspsDot1adPepEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry contains information (PVID, Acceptable frame type, default user priority
and ingress filtering) for the packets received over internal PEPs.
Creation of an entry in this table is not allowed and only modification
is allowed."
INDEX {snMspsDot1adPortNum,
snMspsDot1adCVidRegistrationSVid
}
::= { snMspsDot1adPepTable 1 }
SnMspsDot1adPepEntry ::=
SEQUENCE {
snMspsDot1adPepPvid VlanId,
snMspsDot1adPepDefaultUserPriority INTEGER,
snMspsDot1adPepAccptableFrameTypes INTEGER,
snMspsDot1adPepIngressFiltering TruthValue
}
snMspsDot1adPepPvid OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The VLAN ID to be used for the untagged packets received over this
PEP. This refers to the customer VLAN ID to which the untagged packets
received over this PEP will be classified. And this is the VLAN ID
put in the C-VLAN tag when the outgoing CEP is tagged i.e untagged CEP is
set to False for this port in the C-VID registration table entry."
::= { snMspsDot1adPepEntry 1 }
snMspsDot1adPepDefaultUserPriority OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The default ingress user priority to be used for the untagged
packets received over provider edge ports.This will be used for
the PCP encoding of C-VLAN tag for the outgoing packets when the
outgoing CEP is tagged i.e untagged CEP is set to False in the
C-VID registration table entry for this port."
DEFVAL { 0 }
::= { snMspsDot1adPepEntry 2 }
snMspsDot1adPepAccptableFrameTypes OBJECT-TYPE
SYNTAX INTEGER {
admitAll(1),
admitOnlyVlanTagged(2),
admitOnlyUntaggedAndPriorityTagged (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When this is admitOnlyVlanTagged(2) the device will
discard untagged frames or Priority-Tagged frames
received on this port. When admitAll(1) is set, all frames
tagged/untagged/priority tagged frames received on this port
will be accepted.
When admitOnlyUntaggedAndPriorityTagged(3) is set, untagged and
priority tagged frames alone will be accepted and tagged
frames received over this PEP will be discarded."
DEFVAL { admitAll }
::= { snMspsDot1adPepEntry 3 }
snMspsDot1adPepIngressFiltering OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When this is true(1), if this port is not in the member set of a
C-VLAN, then frames received on this port classified to that C-VLAN
will be discarded. When false(2), the port will accept all
incoming frames received over this PEP"
DEFVAL { false }
::= { snMspsDot1adPepEntry 4 }
-- ----------------------------------------------------------------
-- Service Priority regeneration configuration table (Ref.
-- IEEE802.1ad/D6 - Section 12.13.3.5 and 12.13.3.6)
-- ----------------------------------------------------------------
snMspsDot1adServicePriorityRegenerationTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDot1adServicePriorityRegenerationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table maps each receive priority to a regenerated priority on
this internal customer network port.
Creation of an entry in this table is not allowed and only modification
is allowed.
An entry will be created in this table with default values for the
CEP and S-VLAN pair,when the corresponding entry is created in C-VID
registration table."
::= { snMspsDot1adProviderBridge 5 }
snMspsDot1adServicePriorityRegenerationEntry OBJECT-TYPE
SYNTAX SnMspsDot1adServicePriorityRegenerationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table maintains the mapping of incoming priority and regenerated
priority for internal customer network ports."
INDEX { snMspsDot1adPortNum,
snMspsDot1adCVidRegistrationSVid,
snMspsDot1adServicePriorityRegenReceivedPriority }
::= { snMspsDot1adServicePriorityRegenerationTable 1 }
SnMspsDot1adServicePriorityRegenerationEntry ::=
SEQUENCE {
snMspsDot1adServicePriorityRegenReceivedPriority INTEGER,
snMspsDot1adServicePriorityRegenRegeneratedPriority INTEGER
}
snMspsDot1adServicePriorityRegenReceivedPriority OBJECT-TYPE
SYNTAX INTEGER(0..7)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The received priority value for a frame over the internal customer
network port. For tagged packets, this refers to the priority of C-tag
received over the CEPs.
For untagged packets, the default user priority of CEP will be used as
the receive priority."
::= { snMspsDot1adServicePriorityRegenerationEntry 1 }
snMspsDot1adServicePriorityRegenRegeneratedPriority OBJECT-TYPE
SYNTAX INTEGER(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The regenerated priority value for the received priority for a frame
received over the internal customer network port. The PCP encoding
for the frames that are to be sent out will be based on the regenerated
priority value got from this object."
::= { snMspsDot1adServicePriorityRegenerationEntry 2 }
-- ----------------------------------------------------------------
-- PCP decoding table (Priority Code Point decoding table)
-- (Ref. IEEE802.1ad/D6 - section 12.6.2.8 and 12.6.2.9)
-- ----------------------------------------------------------------
snMspsDot1adPcpDecodingTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDot1adPcpDecodingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The priority and drop_eligible parameters of the received frames
are decoded from the PCP using Priority Code Point decoding table. For
each port, the PCP decoding table has eight entries corresponding to each
of the possible PCP values."
::= { snMspsDot1adProviderBridge 6 }
snMspsDot1adPcpDecodingEntry OBJECT-TYPE
SYNTAX SnMspsDot1adPcpDecodingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table entry contains the priority and drop_eligible information for
a particular port, PCP selection row and PCP value.
Creation of an entry in this table is not allowed and only modification
is permitted"
INDEX { snMspsDot1adPortNum,
snMspsDot1adPcpDecodingPcpSelRow,
snMspsDot1adPcpDecodingPcpValue
}
::= { snMspsDot1adPcpDecodingTable 1 }
SnMspsDot1adPcpDecodingEntry ::=
SEQUENCE {
snMspsDot1adPcpDecodingPcpSelRow PriorityCodePoint,
snMspsDot1adPcpDecodingPcpValue INTEGER,
snMspsDot1adPcpDecodingPriority INTEGER,
snMspsDot1adPcpDecodingDropEligible TruthValue
}
snMspsDot1adPcpDecodingPcpSelRow OBJECT-TYPE
SYNTAX PriorityCodePoint
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The PCP selection row in the decoding table for which the priority and
drop eligible parameters are to be mapped for a given PCP value."
::= { snMspsDot1adPcpDecodingEntry 1 }
snMspsDot1adPcpDecodingPcpValue OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The PCP value in the decoding table for which the priority and
drop eligible parameters are to be derived."
::= { snMspsDot1adPcpDecodingEntry 2 }
snMspsDot1adPcpDecodingPriority OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Priority associated with the particular PCP and PCP selection row in
the PCP decoding table.This is the priority decoded for the PCP associated
with the received frame. The frame will further be processed with this
priority value."
::= { snMspsDot1adPcpDecodingEntry 3 }
snMspsDot1adPcpDecodingDropEligible OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The drop_eligible value associated with the particular PCP and PCP
selection row in the PCP decoding table. When this is set to True,
frames should be discarded in preference to other frames with drop_eligible
False."
::= { snMspsDot1adPcpDecodingEntry 4 }
-- ----------------------------------------------------------------
-- PCP encoding table (Priority Code Point encoding table)
-- (Ref. IEEE802.1ad/D6 - section 12.6.2.10 and 12.6.2.11)
-- ----------------------------------------------------------------
snMspsDot1adPcpEncodingTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDot1adPcpEncodingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The priority and drop_eligible parameters are encoded in the Priority Code
Point field of the VLAN tag using the Priority Code Point encoding table
for the port. For each port, PCP encoding table has 16 entries, corresponding
to each of the possible combinations of the eight possible values of priority
and two possible values of drop_eligible."
::= { snMspsDot1adProviderBridge 7 }
snMspsDot1adPcpEncodingEntry OBJECT-TYPE
SYNTAX SnMspsDot1adPcpEncodingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table entry contains the PCP value for a particular port,PCP selection
row, priority and drop_eligible value.
Creation of an entry in this table is not allowed and only modification
is permitted."
INDEX {snMspsDot1adPortNum,
snMspsDot1adPcpEncodingPcpSelRow,
snMspsDot1adPcpEncodingPriority,
snMspsDot1adPcpEncodingDropEligible
}
::= { snMspsDot1adPcpEncodingTable 1 }
SnMspsDot1adPcpEncodingEntry ::=
SEQUENCE {
snMspsDot1adPcpEncodingPcpSelRow PriorityCodePoint,
snMspsDot1adPcpEncodingPriority INTEGER,
snMspsDot1adPcpEncodingDropEligible TruthValue,
snMspsDot1adPcpEncodingPcpValue INTEGER
}
snMspsDot1adPcpEncodingPcpSelRow OBJECT-TYPE
SYNTAX PriorityCodePoint
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The PCP selection row in the encoding table for which the the PCP value
to be mapped for a particular priority and drop_eligible combination."
::= { snMspsDot1adPcpEncodingEntry 1 }
snMspsDot1adPcpEncodingPriority OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The priority associated with a particular PCP selection row.
Priority and drop_eligible combination for a particular port will
be mapped to a PCP valule."
::= { snMspsDot1adPcpEncodingEntry 2 }
snMspsDot1adPcpEncodingDropEligible OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The drop_eligible parameter associated with a particular priority
and PCP selection row in the PCP encoding table."
::= { snMspsDot1adPcpEncodingEntry 3 }
snMspsDot1adPcpEncodingPcpValue OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The PCP value associated with the particular priority and drop_eligible
combination of the PCP selection row in PCP encoding table. This will be
encoded in the transmitted frames."
::= { snMspsDot1adPcpEncodingEntry 4 }
--Proprietary MIB implementation for the Provider Bridging functionality
snMspsDot1adPbContextInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDot1adPbContextInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"List of Provider Bridge related objects that can be configured
per Virtual Context in the system."
::= { snMspsDot1adPbSystem 1 }
snMspsDot1adPbContextInfoEntry OBJECT-TYPE
SYNTAX SnMspsDot1adPbContextInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Virtual Context based Provider Bridge objects."
INDEX { snMspsDot1adPbContextId }
::= { snMspsDot1adPbContextInfoTable 1 }
SnMspsDot1adPbContextInfoEntry ::=
SEQUENCE {
snMspsDot1adPbContextId
Integer32,
snMspsDot1adPbMulticastMacLimit
Unsigned32,
snMspsDot1adPbTunnelStpAddress
MacAddress,
snMspsDot1adPbTunnelLacpAddress
MacAddress,
snMspsDot1adPbTunnelDot1xAddress
MacAddress,
snMspsDot1adPbTunnelGvrpAddress
MacAddress,
snMspsDot1adPbTunnelGmrpAddress
MacAddress
}
snMspsDot1adPbContextId OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identifies a Virtual Context."
::= { snMspsDot1adPbContextInfoEntry 1 }
snMspsDot1adPbMulticastMacLimit OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Multicast MAC table size of the device. The size SET for
this object is applicable only for the Virtual Context identified
by the Virtual Context Id in this entry.The upper limit value
that can be SET for this object is limited by the underlying
hardware. While on initialisation this object hold the maximum
size of the Multicast MAC table of the device."
::= { snMspsDot1adPbContextInfoEntry 2 }
snMspsDot1adPbTunnelStpAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The MAC address SET for this object is applicable only for the
Virtual Context identified by the Virtual Context Id in this entry.
The MAC address to be used for Customer STP BPDUs tunneling inside
Provider Network.
When tunneling is enabled on a port, this MAC address will be
used as the the destination MAC address of the customer BPDUs received
on a port where STP tunneling is enabled and the outgoing port is a
proprietary PNP.
Inside Provider Network, the BPDUs received with this MAC address
will be treated as data packets and not processed.
When the BPDU is sent out of the Provider Network, this MAC address
will be replaced with the reserved address defined for Customer STP
BPDUs.
This configuration is allowed only for Provider Core or
Edge Bridges."
::= { snMspsDot1adPbContextInfoEntry 3 }
snMspsDot1adPbTunnelLacpAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The MAC address SET for this object is applicable only for the
Virtual Context identified by the Virtual Context Id in this entry.
The MAC address to be used for LACP packets tunneling inside Provider
Network. When tunneling is enabled on a port, this MAC address will be
used as the the destination MAC address of the customer LACP packets
received over this port.
Inside Provider Network, LACP packets received with this MAC address
will be treated as data packets and not processed.
When the tunneled LACP packets are sent out of the Provider Network,
this MAC address will be replaced with the reserved address defined
for LACP packets.
This configuration is allowed only for Provider Core or
Edge Bridges."
::= { snMspsDot1adPbContextInfoEntry 4 }
snMspsDot1adPbTunnelDot1xAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The MAC address SET for this object is applicable only for the
Virtual Context identified by the Virtual Context Id in this entry.
The MAC address to be used for Dot1x packets tunneling inside Provider
Network. When tunneling is enabled on a port, this MAC address will be
used as the the destination MAC address of the customer Dot1x packets
received over this port.
Inside Provider Network, Dot1x packets received with this MAC address
will be treated as data packets and not processed.
When the tunneled Dot1x packets are sent out of the Provider Network,
this MAC address will be replaced with the reserved address defined
for Dot1x packets.
This configuration is allowed only for Provider Core or
Edge Bridges."
::= { snMspsDot1adPbContextInfoEntry 5 }
snMspsDot1adPbTunnelGvrpAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The MAC address SET for this object is applicable only for the
Virtual Context identified by the Virtual Context Id in this entry.
The MAC address to be used for GVRP PDUs tunneling inside Provider
Network. When tunneling is enabled on a port, this MAC address will be
used as the the destination MAC address of the customer GVRP PDUs
received on a port where GVRP tunneling is enable and the outgoing
port is a proprietary PNP.
Inside Provider Network, GVRP PDUs received with this MAC address
will be treated as data packets and not processed.
When the tunneled GVRP PDUs are sent out of the Provider Network,
this MAC address will be replaced with the reserved address defined
for GVRP PDUs.
This configuration is allowed only for Provider Core or
Edge Bridges."
::= { snMspsDot1adPbContextInfoEntry 6 }
snMspsDot1adPbTunnelGmrpAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The MAC address SET for this object is applicable only for the
Virtual Context identified by the Virtual Context Id in this entry.
The MAC address to be used for GMRP PDUs tunneling inside Provider
Network. When tunneling is enabled on a port, this MAC address will be
used as the the destination MAC address of the customer GMRP PDUs
received over this port.
Inside Provider Network, GMRP PDUs received with this MAC address
will be treated as data packets and not processed.
When the tunneled GMRP PDUs are sent out of the Provider Network,
this MAC address will be replaced with the reserved address defined
for GMRP PDUs.
This configuration is allowed only for Provider Core or
Edge Bridges."
::= { snMspsDot1adPbContextInfoEntry 7 }
-- -------------------------------------------------------------
-- The Provider Bridge Port Type Configuration Table
-- -------------------------------------------------------------
snMspsDot1adPbPortInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDot1adPbPortInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing provider bridge releated
configurations for the externally accessible ports.
All the objects in this table are applicable
only when the Bridge Mode is set as ProviderBridge or
ProviderCoreBridge or ProviderEdgeBridge."
::= { snMspsDot1adPbConfig 1 }
snMspsDot1adPbPortInfoEntry OBJECT-TYPE
SYNTAX SnMspsDot1adPbPortInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table specifies the Provider Bridge related
port configurations. This table is indexed by ifIndex. "
INDEX { snMspsDot1adPbPort }
::= { snMspsDot1adPbPortInfoTable 1 }
SnMspsDot1adPbPortInfoEntry ::=
SEQUENCE {
snMspsDot1adPbPort Integer32,
snMspsDot1adPbPortSVlanClassificationMethod INTEGER,
snMspsDot1adPbPortSVlanIngressEtherType Integer32,
snMspsDot1adPbPortSVlanEgressEtherType Integer32,
snMspsDot1adPbPortSVlanEtherTypeSwapStatus EnabledStatus,
snMspsDot1adPbPortSVlanTranslationStatus EnabledStatus,
snMspsDot1adPbPortUnicastMacLearning EnabledStatus,
snMspsDot1adPbPortUnicastMacLimit Unsigned32
}
snMspsDot1adPbPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Index value of the port in the system for which this entry
applies. The maximum index value of the port is defined by the
system."
::= { snMspsDot1adPbPortInfoEntry 1 }
snMspsDot1adPbPortSVlanClassificationMethod OBJECT-TYPE
SYNTAX INTEGER {
sourceMac (1),
destinationMac (2),
cvlanSrcMac (3),
cvlanDstMac (4),
dscp (5),
cvlanDscp (6),
sourceIp (7),
destinationIp (8),
srcIpDstIp (9),
cvlanDstIp (10),
cvlan (11),
pvid (12)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the type of SVLAN classification that has to be used
for a given type of port.
providerNetworkPort / customerNetworkPort - Port's 'pvid' will be the
SVLAN classification for the untagged packets received over this interface.
customerEdgePort - The SVLAN classification mechanism is always based on
'cvlan' (i.e CVidRegistrationTable ).No other SVLAN classification mechanism is
allowed for this port type.
propCustomerNetworkPort / propCustomerEdgePort - 'pvid' will be
default SVLAN classification mechanism for this port. But the user is free to
configure any other SVLAN classification mechanism except the
CVidRegistrationTable (ie cvlan mechanism)
For proprietary CEP and proprietary CNP ports,the SVLAN classification
is based on one of the configured SVLAN classification methods mentioned
here. If it is not configured, by default the port's 'PVID' is considered
as the SVLAN for untagged packets."
::= { snMspsDot1adPbPortInfoEntry 2 }
snMspsDot1adPbPortSVlanIngressEtherType OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This object indicates the S-VLAN tag ether type used for the packets
received on this port.Packets received on a port are considered tagged,
when the packet ethertype matches with the port ether type configured.
Otherwise, they will be considered untagged.
By default, on all the ports, 0x88a8 will be configured as the ether type.
On Proprietary Provider Network Ports 0x8100 will be configured as the
ingress ethertype."
DEFVAL { 34984 }
::= { snMspsDot1adPbPortInfoEntry 3 }
snMspsDot1adPbPortSVlanEgressEtherType OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This object indicates the ether type of the S-VLAN tag that has to
be applied for all the outgoing packets on this port. If a valid value is
in this object, all the packets which are outgoing on this port will
contain the ether type as configured in this object. By Default 0x88a8
will be used for packets transmitted with S-VLAN on the ports.
On Proprietary Provider Network Ports and Customer Edge Ports, 0x8100
will be used as the ether type for the outgoing packets."
DEFVAL { 34984 }
::= { snMspsDot1adPbPortInfoEntry 4}
snMspsDot1adPbPortSVlanEtherTypeSwapStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This object indicates whether the Ether Type Swapping can be
applied on the S-VLAN tagged packets over this port.
The Ether type swapping will only be applied on S-VLAN tag of a packet.
This configuration is applicable for all values of Port Type other
than customer edge ports."
DEFVAL { disabled }
::= { snMspsDot1adPbPortInfoEntry 5 }
snMspsDot1adPbPortSVlanTranslationStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This object indicates whether the VID Translation table can be
enabled on the incoming/outgoing packets on a particular port.
The Service Vlan swapping is applicable only for the externally
accesible network ports (ie) Provider Network Port ,Customer Network port
and proprietary Customer Network Port. The Service Vlan Translation status
can be enabled or disabled on per port basis. By default, it is enabled on
Provider Network Port and Customer Network Port(S-Tagged) and disabled on
the other applicable port-types."
::= { snMspsDot1adPbPortInfoEntry 6 }
snMspsDot1adPbPortUnicastMacLearning OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A Truth value indicating the unicast MAC learning enabled/disabled
status for this port. When Unicast Mac Learning is disabled, No
Entry will be learned from the point of configuration on this port.
When Mac Learning is enabled, Entries will be learned on this port."
DEFVAL { enabled }
::= { snMspsDot1adPbPortInfoEntry 7 }
snMspsDot1adPbPortUnicastMacLimit OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Limiting value on the number of distinct unicast destination MAC
addresses that can be dynamically learnt over this interface.
The lower limit and upper limit value that can be SET for this object
is determined by the underlying hardware. This Limit is applicable for
only dynamically learned entries and NOT for static unicast entries"
::= { snMspsDot1adPbPortInfoEntry 8 }
-- -------------------------------------------------------------
-- The S-VLAN Port , SourceMAC based Configuration Table
-- -------------------------------------------------------------
snMspsDot1adPbSrcMacSVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDot1adPbSrcMacSVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing per port, per SourceMAC based Service VLAN
classification information in the device. Entries can be configured
into this table only when the bridge is configured as a
Provider Bridge and the Port Type for this port is SET
as Proprietary Customer Edge Port / Proprietary Customer Network Port."
::= { snMspsDot1adPbConfig 2 }
snMspsDot1adPbSrcMacSVlanEntry OBJECT-TYPE
SYNTAX SnMspsDot1adPbSrcMacSVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information controlling Service VLAN classification at this
specified port for an ingress frame with the specified Source
MAC address in the ethernet header of the frame."
INDEX { snMspsDot1adPbPort, snMspsDot1adPbSrcMacAddress }
::= { snMspsDot1adPbSrcMacSVlanTable 1 }
SnMspsDot1adPbSrcMacSVlanEntry ::=
SEQUENCE {
snMspsDot1adPbSrcMacAddress MacAddress,
snMspsDot1adPbSrcMacSVlan VlanId,
snMspsDot1adPbSrcMacRowStatus RowStatus
}
snMspsDot1adPbSrcMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Source MAC address present in the ethernet header of the
frame received on this port for which Service VLAN is assigned
based on this entry."
::= { snMspsDot1adPbSrcMacSVlanEntry 1 }
snMspsDot1adPbSrcMacSVlan OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Service VLAN ID assigned to frames received on this port when
the Source MAC address in the ethernet header of the frame is same
as specified in this entry."
::= { snMspsDot1adPbSrcMacSVlanEntry 2 }
snMspsDot1adPbSrcMacRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in this table is not used when this
object is SET 'notInService'. An entry created in this table is
be deleted when this object is SET 'destroy'."
::= { snMspsDot1adPbSrcMacSVlanEntry 3 }
-- -------------------------------------------------------------
-- The S-VLAN Port , DestinationMAC based Configuration Table
-- -------------------------------------------------------------
snMspsDot1adPbDstMacSVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDot1adPbDstMacSVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing per port, per Destination MAC based Service
VLAN classification information in the device. Entries can be
configured into this table only when the bridge is configured
as a Provider Bridge. An entry in this table is possible only when the
'Port Type' for this port is SET as Proprietary Customer Network Port
or Proprietary Customer Edge Port."
::= { snMspsDot1adPbConfig 3 }
snMspsDot1adPbDstMacSVlanEntry OBJECT-TYPE
SYNTAX SnMspsDot1adPbDstMacSVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information controlling Service VLAN classification at this
specified port for an ingress frame with the
specified Destination MAC address in the ethernet header of the frame."
INDEX { snMspsDot1adPbPort, snMspsDot1adPbDstMacAddress }
::= { snMspsDot1adPbDstMacSVlanTable 1 }
SnMspsDot1adPbDstMacSVlanEntry ::=
SEQUENCE {
snMspsDot1adPbDstMacAddress MacAddress,
snMspsDot1adPbDstMacSVlan VlanId,
snMspsDot1adPbDstMacRowStatus RowStatus
}
snMspsDot1adPbDstMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Destination MAC address present in the ethernet header of the
frame received on this port for which Service VLAN is assigned
based on this entry."
::= { snMspsDot1adPbDstMacSVlanEntry 1 }
snMspsDot1adPbDstMacSVlan OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Service VLAN ID assigned to frames received on this port when
the Destination MAC address in the ethernet header of the frame is
same as specified in this entry."
::= { snMspsDot1adPbDstMacSVlanEntry 2 }
snMspsDot1adPbDstMacRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in this table is not used when this
object is SET 'notInService'. An entry created in this table is
deleted when this object is SET 'destroy'."
::= { snMspsDot1adPbDstMacSVlanEntry 3 }
-- -------------------------------------------------------------
-- The S-VLAN Port , C-VLAN, Source MAC based Configuration Table
-- -------------------------------------------------------------
snMspsDot1adPbCVlanSrcMacSVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDot1adPbCVlanSrcMacSVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing per Port, per Customer VLAN ID,
per Source MAC based S-VLAN classification information in the device.
Entries can be configured into this table only when the bridge is
configured as a Provider Bridge. An entry in this table is
possible only when the 'PortType' for this port is SET as
Proprietary Customer Edge Port / Proprietary Customer Network Port."
::= { snMspsDot1adPbConfig 4 }
snMspsDot1adPbCVlanSrcMacSVlanEntry OBJECT-TYPE
SYNTAX SnMspsDot1adPbCVlanSrcMacSVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information controlling Service VLAN classification at this specified
port for an ingress frame with the classified Customer VLAN ID and
with the specified Source MAC address in the ethernet header of the frame.
Classification of Customer VLAN ID may be from the Customer VLAN tag
in the received frame OR based on Port CVLAN table."
INDEX { snMspsDot1adPbPort, snMspsDot1adPbCVlanSrcMacCVlan, snMspsDot1adPbCVlanSrcMacAddr }
::= { snMspsDot1adPbCVlanSrcMacSVlanTable 1 }
SnMspsDot1adPbCVlanSrcMacSVlanEntry ::=
SEQUENCE {
snMspsDot1adPbCVlanSrcMacCVlan VlanId,
snMspsDot1adPbCVlanSrcMacAddr MacAddress,
snMspsDot1adPbCVlanSrcMacSVlan VlanId,
snMspsDot1adPbCVlanSrcMacRowStatus RowStatus
}
snMspsDot1adPbCVlanSrcMacCVlan OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Customer VLAN ID in the Customer VLAN tag of an ingress frame
at this specified port OR the Customer VLAN ID for which the ingress
frame is classified to this specified port."
::= { snMspsDot1adPbCVlanSrcMacSVlanEntry 1 }
snMspsDot1adPbCVlanSrcMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Source MAC address in the ethernet header of the
frame received on this port."
::= { snMspsDot1adPbCVlanSrcMacSVlanEntry 2 }
snMspsDot1adPbCVlanSrcMacSVlan OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Service VLAN assigned to frames received on this port,
When the Classified Customer VLAN ID is same as specified in
this entry and When the Source MAC address in the ethernet header
of the frame is same as specified in this entry.
Classification of Customer VLAN ID may be from the Customer VLAN tag
in the received frame OR based on Port CVLAN table."
::= { snMspsDot1adPbCVlanSrcMacSVlanEntry 3 }
snMspsDot1adPbCVlanSrcMacRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in this table is not used when this
object is SET 'notInService'. An entry created in this table is
deleted when this object is SET 'destroy'."
::= { snMspsDot1adPbCVlanSrcMacSVlanEntry 4 }
-- -------------------------------------------------------------
-- The S-VLAN Port , C-VLAN, Destination MAC based Configuration Table
-- -------------------------------------------------------------
snMspsDot1adPbCVlanDstMacSVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDot1adPbCVlanDstMacSVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing per Port, per Customer VLAN ID,
per Destination MAC based S-VLAN classification information in the
device. Entries can be configured into this table only when the
bridge is configured as a Provider Bridge. An entry in this table
is possible only when the 'Port Type' for this port is SET
as Proprietary Customer Edge Port / Proprietary Customer Network Port."
::= { snMspsDot1adPbConfig 5 }
snMspsDot1adPbCVlanDstMacSVlanEntry OBJECT-TYPE
SYNTAX SnMspsDot1adPbCVlanDstMacSVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information controlling Service VLAN classification at this specified
port for an ingress frame with the classified Customer VLAN ID and
with the specified Destination MAC address in the ethernet header of
the frame.
Classification of Customer VLAN ID may be from the Customer VLAN tag
in the received frame OR based on Port CVLAN table."
INDEX { snMspsDot1adPbPort, snMspsDot1adPbCVlanDstMacCVlan, snMspsDot1adPbCVlanDstMacAddr }
::= { snMspsDot1adPbCVlanDstMacSVlanTable 1 }
SnMspsDot1adPbCVlanDstMacSVlanEntry ::=
SEQUENCE {
snMspsDot1adPbCVlanDstMacCVlan VlanId,
snMspsDot1adPbCVlanDstMacAddr MacAddress,
snMspsDot1adPbCVlanDstMacSVlan VlanId,
snMspsDot1adPbCVlanDstMacRowStatus RowStatus
}
snMspsDot1adPbCVlanDstMacCVlan OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Customer VLAN ID in the Customer VLAN tag of an ingress frame
at this specified port or the Customer VLAN ID for which the ingress
frame is classified for at this specified port."
::= { snMspsDot1adPbCVlanDstMacSVlanEntry 1 }
snMspsDot1adPbCVlanDstMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Destination MAC address in the ethernet header of the
frame received on this port."
::= { snMspsDot1adPbCVlanDstMacSVlanEntry 2 }
snMspsDot1adPbCVlanDstMacSVlan OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Service VLAN assigned to frames received on this port
when the Classified Customer VLAN ID and when the Destination
MAC address in the ethernet header of the frame is same as
specified in this entry.
Classification of Customer VLAN ID may be from the Customer VLAN tag
in the received frame OR based on Port CVLAN table."
::= { snMspsDot1adPbCVlanDstMacSVlanEntry 3 }
snMspsDot1adPbCVlanDstMacRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in this table is not used when this
object is SET 'notInService'. An entry created in this table is
deleted when this object is SET 'destroy'."
::= { snMspsDot1adPbCVlanDstMacSVlanEntry 4 }
-- -------------------------------------------------------------
-- The S-VLAN Port , DSCP based Configuration Table
-- -------------------------------------------------------------
snMspsDot1adPbDscpSVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDot1adPbDscpSVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing per port, per DiffServ Code Point (DSCP) value
based Service VLAN classification information in the device.
Entries can be configured into this table only when the bridge is
configured as a Provider Bridge and the 'PortType' for
this port is SET as Proprietary Customer Network Port or
Proprietary Customer Edge Port."
::= { snMspsDot1adPbConfig 6 }
snMspsDot1adPbDscpSVlanEntry OBJECT-TYPE
SYNTAX SnMspsDot1adPbDscpSVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information controlling Service VLAN classification at this
specified port for an ingress IP frame with the DSCP value as
specified in this entry."
INDEX { snMspsDot1adPbPort, snMspsDot1adPbDscp }
::= { snMspsDot1adPbDscpSVlanTable 1 }
SnMspsDot1adPbDscpSVlanEntry ::=
SEQUENCE {
snMspsDot1adPbDscp Integer32,
snMspsDot1adPbDscpSVlan VlanId,
snMspsDot1adPbDscpRowStatus RowStatus
}
snMspsDot1adPbDscp OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The DSCP value in the IP header of the frame received on
this port for which Service VLAN is assigned based on this entry."
::= { snMspsDot1adPbDscpSVlanEntry 1 }
snMspsDot1adPbDscpSVlan OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Service VLAN ID assigned to IP frames received on this port
when the DSCP value in the IP header of the frame is same as
specified in this entry."
::= { snMspsDot1adPbDscpSVlanEntry 2 }
snMspsDot1adPbDscpRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in this table is not used when this
object is SET 'notInService'. An entry created in this table is
deleted when this object is SET 'destroy'."
::= { snMspsDot1adPbDscpSVlanEntry 3 }
-- -------------------------------------------------------------
-- The S-VLAN Port ,C-VLAN and DSCP based Configuration Table
-- -------------------------------------------------------------
snMspsDot1adPbCVlanDscpSVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDot1adPbCVlanDscpSVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing per port, per Customer VLAN ID, per DiffServ Code
Point (DSCP) value based Service VLAN classification information in
the device. Entries can be configured into this table only when the
bridge is configured as a Provider Bridge and the 'PortType' for
this port is SET as Proprietary Customer Edge Port / Proprietary Customer
Network Port."
::= { snMspsDot1adPbConfig 7 }
snMspsDot1adPbCVlanDscpSVlanEntry OBJECT-TYPE
SYNTAX SnMspsDot1adPbCVlanDscpSVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information controlling Service VLAN classification at this
specified port for an ingress IP frame with the classified
Customer VLAN ID as specified in this entry and the DSCP value
in the frame as specified in this entry.
Classification of Customer VLAN ID may be from the Customer VLAN tag
in the received frame OR based on Port CVLAN table."
INDEX { snMspsDot1adPbPort, snMspsDot1adPbCVlanDscpCVlan, snMspsDot1adPbCVlanDscp }
::= { snMspsDot1adPbCVlanDscpSVlanTable 1 }
SnMspsDot1adPbCVlanDscpSVlanEntry ::=
SEQUENCE {
snMspsDot1adPbCVlanDscpCVlan VlanId,
snMspsDot1adPbCVlanDscp Integer32,
snMspsDot1adPbCVlanDscpSVlan VlanId,
snMspsDot1adPbCVlanDscpRowStatus RowStatus
}
snMspsDot1adPbCVlanDscpCVlan OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Customer VLAN ID in the Customer VLAN tag of an ingress frame
at this specified port or the Customer VLAN ID for which the ingress
frame is classified for at this specified port."
::= { snMspsDot1adPbCVlanDscpSVlanEntry 1 }
snMspsDot1adPbCVlanDscp OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The DSCP value in the IP header of the frame received on
this port."
::= { snMspsDot1adPbCVlanDscpSVlanEntry 2 }
snMspsDot1adPbCVlanDscpSVlan OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Service VLAN ID assigned to frames received on this port,
when the classified Customer VLAN ID is the same as specified in
this entry and when the DSCP value in the IP header of the frame
is same as specified in this entry.
Classification of Customer VLAN ID may be from the Customer VLAN tag
in the received frame OR based on Port CVLAN table."
::= { snMspsDot1adPbCVlanDscpSVlanEntry 3 }
snMspsDot1adPbCVlanDscpRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in this table is not used when this
object is SET 'notInService'. An entry created in this table is
deleted when this object is SET 'destroy'."
::= { snMspsDot1adPbCVlanDscpSVlanEntry 4 }
-- -------------------------------------------------------------
-- The S-VLAN Port ,Source IP Address based Configuration Table
-- -------------------------------------------------------------
snMspsDot1adPbSrcIpAddrSVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDot1adPbSrcIpAddrSVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing per port, per Source IP Address, based Service VLAN
classification information in the device. Entries can be configured
into this table only when the bridge is configured as a Provider
Bridge and the 'PortType' for this port is SET as
Proprietary Customer Network Port or Proprietary Customer Edge Port."
::= { snMspsDot1adPbConfig 8 }
snMspsDot1adPbSrcIpAddrSVlanEntry OBJECT-TYPE
SYNTAX SnMspsDot1adPbSrcIpAddrSVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information controlling Service VLAN classification at this
specified port for an ingress IP frame with the Source IP Address
in the IP header of the frame as specified in this entry."
INDEX { snMspsDot1adPbPort, snMspsDot1adPbSrcIpAddr }
::= { snMspsDot1adPbSrcIpAddrSVlanTable 1 }
SnMspsDot1adPbSrcIpAddrSVlanEntry ::=
SEQUENCE {
snMspsDot1adPbSrcIpAddr IpAddress,
snMspsDot1adPbSrcIpSVlan VlanId,
snMspsDot1adPbSrcIpRowStatus RowStatus
}
snMspsDot1adPbSrcIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Source IP Address in the IP header of an ingress
IP frame at this specified port."
::= { snMspsDot1adPbSrcIpAddrSVlanEntry 1 }
snMspsDot1adPbSrcIpSVlan OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Service VLAN ID assigned to frames ingress at this port
when the Source IP address in the IP header of the frame is
same as specified in this entry."
::= { snMspsDot1adPbSrcIpAddrSVlanEntry 2 }
snMspsDot1adPbSrcIpRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in this table is not used when this
object is SET 'notInService'. An entry created in this table is
deleted when this object is SET 'destroy'."
::= { snMspsDot1adPbSrcIpAddrSVlanEntry 3 }
-- -------------------------------------------------------------
-- The S-VLAN Port ,Destination IP Address based Configuration Table
-- -------------------------------------------------------------
snMspsDot1adPbDstIpAddrSVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDot1adPbDstIpAddrSVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing per port, per Destination IP Address, based
Service VLAN classification information in the device. Entries can
be configured into this table only when the bridge is configured as
a Provider Bridge and the 'PortType' for this port is SET
as Proprietary Customer Network Port or Proprietary Customer Edge Port."
::= { snMspsDot1adPbConfig 9 }
snMspsDot1adPbDstIpAddrSVlanEntry OBJECT-TYPE
SYNTAX SnMspsDot1adPbDstIpAddrSVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information controlling Service VLAN classification at this
specified port for an ingress IP frame with the Destination IP
Address in the IP header of the frame as specified in this entry."
INDEX { snMspsDot1adPbPort, snMspsDot1adPbDstIpAddr }
::= { snMspsDot1adPbDstIpAddrSVlanTable 1 }
SnMspsDot1adPbDstIpAddrSVlanEntry ::=
SEQUENCE {
snMspsDot1adPbDstIpAddr IpAddress,
snMspsDot1adPbDstIpSVlan VlanId,
snMspsDot1adPbDstIpRowStatus RowStatus
}
snMspsDot1adPbDstIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Destination IP Address in the IP header of an ingress
IP frame at this specified port."
::= { snMspsDot1adPbDstIpAddrSVlanEntry 1 }
snMspsDot1adPbDstIpSVlan OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Service VLAN ID assigned to frames ingress at this port
when the Destination IP address in the IP header of the frame is
same as specified in this entry."
::= { snMspsDot1adPbDstIpAddrSVlanEntry 2 }
snMspsDot1adPbDstIpRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in this table is not used when this
object is SET 'notInService'. An entry created in this table is
deleted when this object is SET 'destroy'."
::= { snMspsDot1adPbDstIpAddrSVlanEntry 3 }
-- -------------------------------------------------------------
-- The S-VLAN Port ,SourceIP Address, DestinationIP Address based
-- Configuration Table
-- -------------------------------------------------------------
snMspsDot1adPbSrcDstIpSVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDot1adPbSrcDstIpSVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing per port, per Source IP Address, per Destination
IP Address based Service VLAN classification information in the
device. Entries can be configured into this table only when the bridge
is configured as a Provider Bridge and the'PortType' for
this port is SET as Proprietary Customer Network Port or Proprietary
Customer Edge Port."
::= { snMspsDot1adPbConfig 10}
snMspsDot1adPbSrcDstIpSVlanEntry OBJECT-TYPE
SYNTAX SnMspsDot1adPbSrcDstIpSVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information controlling Service VLAN classification at this
specified port for an ingress IP frame with the Source and Destination
IP Address in the IP header of the frame as specified in this entry."
INDEX { snMspsDot1adPbPort, snMspsDot1adPbSrcDstSrcIpAddr, snMspsDot1adPbSrcDstDstIpAddr }
::= { snMspsDot1adPbSrcDstIpSVlanTable 1 }
SnMspsDot1adPbSrcDstIpSVlanEntry ::=
SEQUENCE {
snMspsDot1adPbSrcDstSrcIpAddr IpAddress,
snMspsDot1adPbSrcDstDstIpAddr IpAddress,
snMspsDot1adPbSrcDstIpSVlan VlanId,
snMspsDot1adPbSrcDstIpRowStatus RowStatus
}
snMspsDot1adPbSrcDstSrcIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Source IP Address in the IP header of an ingress
IP frame at this specified port."
::= { snMspsDot1adPbSrcDstIpSVlanEntry 1 }
snMspsDot1adPbSrcDstDstIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Destination IP Address in the IP header of an ingress
IP frame at this specified port."
::= { snMspsDot1adPbSrcDstIpSVlanEntry 2 }
snMspsDot1adPbSrcDstIpSVlan OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Service VLAN ID assigned to frames ingress at this port
when the Source and Destination IP address in the IP header of
the frame are same as specified in this entry."
::= { snMspsDot1adPbSrcDstIpSVlanEntry 3 }
snMspsDot1adPbSrcDstIpRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in this table is not used when this
object is SET 'notInService'. An entry created in this table is
deleted when this object is SET 'destroy'."
::= { snMspsDot1adPbSrcDstIpSVlanEntry 4 }
-- -------------------------------------------------------------
-- The S-VLAN Port ,Customer VLAN ID, Destination IP Address based
-- Configuration Table
-- -------------------------------------------------------------
snMspsDot1adPbCVlanDstIpSVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDot1adPbCVlanDstIpSVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing per port, per Customer VLAN ID, per Destination
IP Address, based Service VLAN classification information in the
device. Entries can be configured into this table only when the bridge
is configured as Provider Bridge or Provider Edge Bridge and the
Port Type for this port is SET as Proprietary Customer Edge Port
/ Proprietary Customer Network Port."
::= { snMspsDot1adPbConfig 11 }
snMspsDot1adPbCVlanDstIpSVlanEntry OBJECT-TYPE
SYNTAX SnMspsDot1adPbCVlanDstIpSVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information controlling Service VLAN classification at this specified
port for an ingress IP frame with the classified Customer VLAN ID as
specified in this entry and the Destination IP Address in the IP header
of the frame as specified in this entry.
Classification of Customer VLAN ID may be from the Customer VLAN tag
in the received frame OR based on Port CVLAN table."
INDEX { snMspsDot1adPbPort, snMspsDot1adPbCVlanDstIpCVlan, snMspsDot1adPbCVlanDstIp }
::= { snMspsDot1adPbCVlanDstIpSVlanTable 1 }
SnMspsDot1adPbCVlanDstIpSVlanEntry ::=
SEQUENCE {
snMspsDot1adPbCVlanDstIpCVlan VlanId,
snMspsDot1adPbCVlanDstIp IpAddress,
snMspsDot1adPbCVlanDstIpSVlan VlanId,
snMspsDot1adPbCVlanDstIpRowStatus RowStatus
}
snMspsDot1adPbCVlanDstIpCVlan OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Customer VLAN ID in the Customer VLAN tag of an ingress frame
at this specified port or the Customer VLAN ID for which the ingress
frame is classified for at this specified port."
::= { snMspsDot1adPbCVlanDstIpSVlanEntry 1 }
snMspsDot1adPbCVlanDstIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Destination IP Address in the IP header of an ingress
IP frame at this specified port."
::= { snMspsDot1adPbCVlanDstIpSVlanEntry 2 }
snMspsDot1adPbCVlanDstIpSVlan OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Service VLAN ID assigned to frames ingress at this port
when the classified Customer VLAN ID is same as specified in this entry
and the Destination IP address in the IP header of the frame is same
as specified in this entry.
Classification of Customer VLAN ID may be from the Customer VLAN tag
in the received frame OR based on Port CVLAN table."
::= { snMspsDot1adPbCVlanDstIpSVlanEntry 3 }
snMspsDot1adPbCVlanDstIpRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in this table is not used when this
object is SET 'notInService'. An entry created in this table is
deleted when this object is SET 'destroy'."
::= { snMspsDot1adPbCVlanDstIpSVlanEntry 4 }
-- -------------------------------------------------------------
-- The C-VLAN Port based Configuration Table
-- -------------------------------------------------------------
snMspsDot1adPbPortBasedCVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDot1adPbPortBasedCVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing Customer Edge Port / Proprietary Customer Edge Port /
Proprietary Customer Network Port mapping to Customer VLAN on a
providerBridge. This table is used for a classifying a untagged frame
received on above mentioned customer ports."
::= { snMspsDot1adPbConfig 12 }
snMspsDot1adPbPortBasedCVlanEntry OBJECT-TYPE
SYNTAX SnMspsDot1adPbPortBasedCVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An Entry in this table will be created whenever a port is configured as
Customer Edge Port / Proprietary Customer Edge Port / Proprietary Customer
Network Port.This Entry will be used on the ingress frame on the specified
ports based on enabled status for classifying the frame to CVLAN. Also
the Entry will be deleted in this table, when the port type is modified
anything other than the specified one."
INDEX { snMspsDot1adPbPort }
::= { snMspsDot1adPbPortBasedCVlanTable 1 }
SnMspsDot1adPbPortBasedCVlanEntry ::=
SEQUENCE {
snMspsDot1adPbPortCVlan VlanId,
snMspsDot1adPbPortCVlanClassifyStatus EnabledStatus
}
snMspsDot1adPbPortCVlan OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Customer VLAN ID assigned to untagged frames ingress at this
specified Customer Edge Port / Proprietary Customer Edge Port /
Proprietary Customer Network Port."
::= { snMspsDot1adPbPortBasedCVlanEntry 1 }
snMspsDot1adPbPortCVlanClassifyStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicate C-VLAN classification status on a port.
This Object can be enabled/disabled only for PropCEP/PropCNP. For CEP,
this object cannot be disabled."
DEFVAL { enabled }
::= { snMspsDot1adPbPortBasedCVlanEntry 2 }
-- -------------------------------------------------------------
-- EtherType SwappingTable
-- -------------------------------------------------------------
snMspsDot1adPbEtherTypeSwapTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDot1adPbEtherTypeSwapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A Table containing the Translation information of the ethertype for a
Service VLAN in a given packet. This Table shall be used only at ingress
and NOT at egress of the Customer Network Port / Proprietary Customer Network
Port / Provider Network Port.
This translation table is applicable for only Service VLAN and not
for customer VLAN's."
::= { snMspsDot1adPbConfig 13 }
snMspsDot1adPbEtherTypeSwapEntry OBJECT-TYPE
SYNTAX SnMspsDot1adPbEtherTypeSwapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry containing the Local and Relay Ether type for a given packet on
a particular port. This entry shall be applicable on all types of ports
if and only if snMspsDot1adPbPortSVlanEtherTypeSwapStatus is Enabled on that Port."
INDEX { snMspsDot1adPbPort, snMspsDot1adPbLocalEtherType}
::= { snMspsDot1adPbEtherTypeSwapTable 1 }
SnMspsDot1adPbEtherTypeSwapEntry ::=
SEQUENCE {
snMspsDot1adPbLocalEtherType Integer32,
snMspsDot1adPbRelayEtherType Integer32,
snMspsDot1adPbEtherTypeSwapRowStatus RowStatus
}
snMspsDot1adPbLocalEtherType OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Ether type present in the service vlan tag of the ingress packet at
the given port."
::= { snMspsDot1adPbEtherTypeSwapEntry 1 }
snMspsDot1adPbRelayEtherType OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Relay Ether type mapped for the ether type present in the local
service vlan tag of the ingress packet at the given port."
::= { snMspsDot1adPbEtherTypeSwapEntry 2 }
snMspsDot1adPbEtherTypeSwapRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in this table is not used when this
object is SET 'notInService'. An entry created in this table is
be deleted when this object is SET 'destroy'."
::= { snMspsDot1adPbEtherTypeSwapEntry 3 }
-- ----------------------------------------------------------------
-- S-VLAN configuration table
-- ----------------------------------------------------------------
snMspsDot1adPbSVlanConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDot1adPbSVlanConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table to configure the service type supported by an S-VLAN. Based
on the service type configured for the S-VLAN, the oper point-to-point
state of PEP ports will be determined.
The service type SET for S-VLAN is applicable only for the S-VLAN in
specified Virtual Context identified by the Virtual Context identifier
in this entry."
::= { snMspsDot1adPbConfig 14 }
snMspsDot1adPbSVlanConfigEntry OBJECT-TYPE
SYNTAX SnMspsDot1adPbSVlanConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" The service type can be configured for an S-VLAN only when the VLAN
is already created in the system."
INDEX { snMspsDot1adPbContextId, dot1qVlanIndex }
::= { snMspsDot1adPbSVlanConfigTable 1 }
SnMspsDot1adPbSVlanConfigEntry ::=
SEQUENCE {
snMspsDot1adPbSVlanConfigServiceType INTEGER
}
snMspsDot1adPbSVlanConfigServiceType OBJECT-TYPE
SYNTAX INTEGER {
eLine (1),
eLan (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object to specify the service type supported by the S-VLAN in the
Virtual Context. When it is set to 'eLine', the S-VLAN connects not more
than two customer interfaces. If the service type for a vlan is 'eLine',
then learning member ports through GVRP will not be allowed.
Hence the oper point-to-point state of the PEPs connecting the S-VLAN can
be set to True for specified Virtual Context.
When it is set to 'eLan', the S-VLAN connects more than two customer
interfaces.So the oper point-to-point state of the PEPs connecting the
S-VLAN will be set to False for specified Virtual Context.
In case of IVL, When the service type is set to E-Line for a VLAN,
the MAC learning status will be set to 'disabled'. When it is set
to E-LAN, MAC learning status will be enabled for that VLAN."
::= { snMspsDot1adPbSVlanConfigEntry 1 }
-- ----------------------------------------------------------------
-- Tunnel protocol configuration table
-- ----------------------------------------------------------------
snMspsDot1adPbTunnelProtocolTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDot1adPbTunnelProtocolEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"This table contains information about the handling (Tunnel/Peer/
Discard)of customer Layer 2 protocols (STP/GVRP/GMRP/LACP/Dot1x
and IGMP) inside service provider network."
::= { snMspsDot1adPbConfig 15 }
snMspsDot1adPbTunnelProtocolEntry OBJECT-TYPE
SYNTAX SnMspsDot1adPbTunnelProtocolEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Entry indicating the handling (Tunnel/Peer/Discard) of Layer 2
protocols (STP/GVRP/GMRP/LACP/Dot1x and IGMP) on this port.
This table is supported only for Provider Core or Provider Edge
Bridges."
INDEX { snMspsDot1adPbPort }
::= { snMspsDot1adPbTunnelProtocolTable 1 }
SnMspsDot1adPbTunnelProtocolEntry ::=
SEQUENCE {
snMspsDot1adPbTunnelProtocolDot1x TunnelStatus,
snMspsDot1adPbTunnelProtocolLacp TunnelStatus,
snMspsDot1adPbTunnelProtocolStp TunnelStatus,
snMspsDot1adPbTunnelProtocolGvrp TunnelStatus,
snMspsDot1adPbTunnelProtocolGmrp TunnelStatus,
snMspsDot1adPbTunnelProtocolIgmp TunnelStatus
}
snMspsDot1adPbTunnelProtocolDot1x OBJECT-TYPE
SYNTAX TunnelStatus
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The object to specify whether to peer/tunnel/discard the Dot1x packets
received on this port."
::= { snMspsDot1adPbTunnelProtocolEntry 1 }
snMspsDot1adPbTunnelProtocolLacp OBJECT-TYPE
SYNTAX TunnelStatus
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The object to specify whether to peer/tunnel/discard the LACP packets
received on this port."
::= { snMspsDot1adPbTunnelProtocolEntry 2 }
snMspsDot1adPbTunnelProtocolStp OBJECT-TYPE
SYNTAX TunnelStatus
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The object to specify whether to peer/tunnel/discard the STP packets
received on this port."
::= { snMspsDot1adPbTunnelProtocolEntry 3 }
snMspsDot1adPbTunnelProtocolGvrp OBJECT-TYPE
SYNTAX TunnelStatus
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The object to specify whether to peer/tunnel/discard the GVRP packets
received on this port."
::= { snMspsDot1adPbTunnelProtocolEntry 4 }
snMspsDot1adPbTunnelProtocolGmrp OBJECT-TYPE
SYNTAX TunnelStatus
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The object to specify whether to peer/tunnel/discard the GMRP packets
received on this port."
::= { snMspsDot1adPbTunnelProtocolEntry 5 }
snMspsDot1adPbTunnelProtocolIgmp OBJECT-TYPE
SYNTAX TunnelStatus
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The object to specify whether to peer/tunnel/discard the IGMP packets
received on this port."
::= { snMspsDot1adPbTunnelProtocolEntry 6 }
-- ----------------------------------------------------------------
-- Tunnel protocol statistics table
-- ----------------------------------------------------------------
snMspsDot1adPbTunnelProtocolStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDot1adPbTunnelProtocolStatsEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"This table contains statistics information about the tunneled
Layer 2 protocols (STP/GVRP/GMRP/LACP/Dot1x and IGMP) received
and transmitted over a port."
::= { snMspsDot1adPbConfig 16 }
snMspsDot1adPbTunnelProtocolStatsEntry OBJECT-TYPE
SYNTAX SnMspsDot1adPbTunnelProtocolStatsEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Entry indicating the handling (Tunnel/Peer/Discard) of Layer 2
protocols (STP/GVRP/GMRP/LACP/Dot1x and IGMP) on this port.
This table is supported only for Provider Core or Provider Edge
Bridges."
INDEX { snMspsDot1adPbPort }
::= { snMspsDot1adPbTunnelProtocolStatsTable 1 }
SnMspsDot1adPbTunnelProtocolStatsEntry ::=
SEQUENCE {
snMspsDot1adPbTunnelProtocolDot1xPktsRecvd Counter32,
snMspsDot1adPbTunnelProtocolDot1xPktsSent Counter32,
snMspsDot1adPbTunnelProtocolLacpPktsRecvd Counter32,
snMspsDot1adPbTunnelProtocolLacpPktsSent Counter32,
snMspsDot1adPbTunnelProtocolStpPDUsRecvd Counter32,
snMspsDot1adPbTunnelProtocolStpPDUsSent Counter32,
snMspsDot1adPbTunnelProtocolGvrpPDUsRecvd Counter32,
snMspsDot1adPbTunnelProtocolGvrpPDUsSent Counter32,
snMspsDot1adPbTunnelProtocolGmrpPktsRecvd Counter32,
snMspsDot1adPbTunnelProtocolGmrpPktsSent Counter32,
snMspsDot1adPbTunnelProtocolIgmpPktsRecvd Counter32,
snMspsDot1adPbTunnelProtocolIgmpPktsSent Counter32
}
snMspsDot1adPbTunnelProtocolDot1xPktsRecvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of tunneled Dot1x Packets received."
::= { snMspsDot1adPbTunnelProtocolStatsEntry 1 }
snMspsDot1adPbTunnelProtocolDot1xPktsSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of tunneled Dot1x Packets transmitted."
::= { snMspsDot1adPbTunnelProtocolStatsEntry 2 }
snMspsDot1adPbTunnelProtocolLacpPktsRecvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of tunneled LACP Packets received."
::= { snMspsDot1adPbTunnelProtocolStatsEntry 3 }
snMspsDot1adPbTunnelProtocolLacpPktsSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of tunneled LACP packets transmitted."
::= { snMspsDot1adPbTunnelProtocolStatsEntry 4 }
snMspsDot1adPbTunnelProtocolStpPDUsRecvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of tunneled STP PDUs received."
::= { snMspsDot1adPbTunnelProtocolStatsEntry 5 }
snMspsDot1adPbTunnelProtocolStpPDUsSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of tunneled STP PDUs transmitted."
::= { snMspsDot1adPbTunnelProtocolStatsEntry 6 }
snMspsDot1adPbTunnelProtocolGvrpPDUsRecvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of tunneled GVRP PDUs received."
::= { snMspsDot1adPbTunnelProtocolStatsEntry 7 }
snMspsDot1adPbTunnelProtocolGvrpPDUsSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of tunneled GVRP PDUs transmitted."
::= { snMspsDot1adPbTunnelProtocolStatsEntry 8 }
snMspsDot1adPbTunnelProtocolGmrpPktsRecvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of tunneled GMRP PDUs packets received."
::= { snMspsDot1adPbTunnelProtocolStatsEntry 9 }
snMspsDot1adPbTunnelProtocolGmrpPktsSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of tunneled GMRP packets transmitted."
::= { snMspsDot1adPbTunnelProtocolStatsEntry 10 }
snMspsDot1adPbTunnelProtocolIgmpPktsRecvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of tunneled IGMP packets received."
::= { snMspsDot1adPbTunnelProtocolStatsEntry 11 }
snMspsDot1adPbTunnelProtocolIgmpPktsSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of tunneled IGMP packets transmitted."
::= { snMspsDot1adPbTunnelProtocolStatsEntry 12 }
-- ----------------------------------------------------------------
-- Provider Edge Port configuration table
-- ----------------------------------------------------------------
snMspsDot1adPbPepExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDot1adPbPepExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is an extention of dot1adMIPepTable table, and it provides
additional configurations to PEPs (like Cos Preservations,..).
when a entry in dot1adMIPepTable is created, then an entry will be
created in this table."
::= { snMspsDot1adPbConfig 17 }
snMspsDot1adPbPepExtEntry OBJECT-TYPE
SYNTAX SnMspsDot1adPbPepExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry contains information like (COS preservation, ..) for the
internal PEPs. Creation of an entry in this table is not allowed
and only modification is allowed."
AUGMENTS { snMspsDot1adPepEntry }
::= { snMspsDot1adPbPepExtTable 1 }
SnMspsDot1adPbPepExtEntry ::=
SEQUENCE {
snMspsDot1adPbPepExtCosPreservation EnabledStatus
}
snMspsDot1adPbPepExtCosPreservation OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to enable or disable COS preservation for a
service provided by this PEP."
DEFVAL { disabled }
::= { snMspsDot1adPbPepExtEntry 1 }
--
-- NTP Module common Objects.
--
snMspsNtpCommon OBJECT IDENTIFIER ::= { snMspsNtp 1 }
--
-- NTP Client Module Objects.
--
snMspsNtpClient OBJECT IDENTIFIER ::= { snMspsNtp 2 }
--
-- NTP Server Module Objects. (For future implementations.)
--
snMspsNtpServer OBJECT IDENTIFIER ::= { snMspsNtp 3 }
--
-- Textual Conventions
--
NTPSignedTimeValue ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The time in seconds that could represent signed
quantities like time delay with respect to some
source."
SYNTAX Integer32
NTPStratum ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Indicates the stratum of the clock. The stratum
defines the accuracy of a time server. Higher the
stratum, lower the accuracy.
0, unspecified
1, primary reference (e.g., calibrated atomic clock,
radio clock)
2-255, secondary reference (via NTP)"
SYNTAX Integer32 (0..255 )
NTPRefId ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The reference clock identifier. In the case of
stratum 0 (unspecified) or stratum 1 (primary
reference source), this is a four-octet,
left-justified, zero-padded ASCII string as defined
in RFC-1305. In the case of stratum 2 and greater
(secondary reference) this is the four-octet Internet
address of the peer selected for synchronization."
SYNTAX OCTET STRING (SIZE (4))
NTPAssocIdentifier ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The association identifier of the peer. Every peer
with which an NTP server is associated with is
identified by an association identifier."
SYNTAX Integer32 (1..2147483647)
--
-- NTP Common System Informations
--
snMspsNtpCommonSysStatus OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The NTP module functionality Operational status, if it is enabled
it will send the NTP Message to the peer and
synchronize peer and or synchronized by peer.
setting this value is depends on other TIME Modules like
SNPT, SINEC, ..."
DEFVAL { disabled }
::= { snMspsNtpCommon 1 }
snMspsNtpCommonTimeZoneDiffTime OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (6))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the Timezone Diff Time with the UTC Time representation or
any other ime representation. format is +/-HH:MM"
-- DEFVAL { "+00:00" }
::= { snMspsNtpCommon 2 }
snMspsNtpCommonSysDateAndTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object give the current system date and time."
::= { snMspsNtpCommon 3 }
snMspsNtpCommonTraceFlag OBJECT-TYPE
SYNTAX Unsigned32 (0.. 255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object used to configure the trace level of the NTP module.
Find the values and corresponding trace information
1.Disable traces 0x00000000
2.Error traces 0x00000001
3.Failure traces 0x00000002
4.Info traces 0x00000004
5.HighInfo traces 0x00000008
6.Debug traces 0x00000010
7.All traces 0x000000ff
and it can be combination of the all above."
DEFVAL { 0 }
::= { snMspsNtpCommon 4 }
--
-- NTP Client Configuration Table Informations
--
snMspsNtpClientPeerTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsNtpClientPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides information on the peers with
which the local NTP has associations. The
peers are also NTP servers but running on different
hosts."
::= { snMspsNtpClient 1 }
snMspsNtpClientPeerEntry OBJECT-TYPE
SYNTAX SnMspsNtpClientPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each peers' entry provides NTP information retrieved
from a particular peer NTP server. Each peer is
identified by a unique association identifier."
INDEX { snMspsNtpClientPeerAssocId }
::= { snMspsNtpClientPeerTable 1 }
SnMspsNtpClientPeerEntry ::= SEQUENCE {
snMspsNtpClientPeerAssocId NTPAssocIdentifier,
snMspsNtpClientPeerPeerAddrType InetAddressType,
snMspsNtpClientPeerPeerInetAddress InetAddress,
snMspsNtpClientPeerPeerPort Integer32,
snMspsNtpClientPeerPeerStratum NTPStratum,
snMspsNtpClientPeerPeerPrecision Integer32,
snMspsNtpClientPeerPeerRefId NTPRefId,
snMspsNtpClientPeerHostPoll Integer32,
snMspsNtpClientPeerHostOffset NTPSignedTimeValue,
snMspsNtpClientPeerHostDelay NTPSignedTimeValue,
snMspsNtpClientPeerEntryStatus RowStatus,
snMspsNtpClientPeerSecureKeyID Integer32,
snMspsNtpClientPeerSecureAlgorithm INTEGER,
snMspsNtpClientPeerSecureKey OCTET STRING
}
snMspsNtpClientPeerAssocId OBJECT-TYPE
SYNTAX NTPAssocIdentifier
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An integer value greater than 0 that uniquely
identifies a peer with which the local NTP server/client
is associated. This value is depends on the no of client entries
support by the NTP implementation.
If an entry creation throughs error as worng-value it may be
reached the no of client entries support by the NTP implementation."
::= { snMspsNtpClientPeerEntry 1 }
snMspsNtpClientPeerPeerAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Represents the type of the corresponding instance
of snMspsNtpClientPeerPeerInetAddress object."
DEFVAL { ipv4 }
::= { snMspsNtpClientPeerEntry 2 }
snMspsNtpClientPeerPeerInetAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The address of the peer. When creating a new
association, a value must be set forthis
object before the row is made active."
::= { snMspsNtpClientPeerEntry 3 }
snMspsNtpClientPeerPeerPort OBJECT-TYPE
SYNTAX Integer32 (123 | 1025..36564)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The UDP port number on which the peer receives NTP
messages."
DEFVAL { 123 }
::= { snMspsNtpClientPeerEntry 4 }
snMspsNtpClientPeerPeerStratum OBJECT-TYPE
SYNTAX NTPStratum
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The stratum of the peer clock."
::= { snMspsNtpClientPeerEntry 5 }
snMspsNtpClientPeerPeerPrecision OBJECT-TYPE
SYNTAX Integer32 (-20..20 )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Signed integer indicating the precision of the peer
clock, in seconds to the nearest power of two. The
value must be rounded to the next larger power of
two; for instance, a 50-Hz (20 ms) or 60-Hz
(16.67 ms) power-frequency clock would be assigned
the value -5 (31.25 ms), while a 1000-Hz (1 ms)
crystal-controlled clock would be assigned the value
-9 (1.95 ms)."
::= { snMspsNtpClientPeerEntry 6 }
snMspsNtpClientPeerPeerRefId OBJECT-TYPE
SYNTAX NTPRefId
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The reference identifier of the peer."
::= { snMspsNtpClientPeerEntry 7 }
snMspsNtpClientPeerHostPoll OBJECT-TYPE
SYNTAX Integer32 (64..2678400)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The interval at which the local host polls the peer.
The minimum interval between transmitted NTP
messages, in seconds."
DEFVAL { 64 }
::= { snMspsNtpClientPeerEntry 8 }
snMspsNtpClientPeerHostOffset OBJECT-TYPE
SYNTAX NTPSignedTimeValue
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The estimated offset of the the local clock relative to
the peer clock, in seconds. The host determines the
value of this object using the NTP clock-filter
algorithm."
::= { snMspsNtpClientPeerEntry 9 }
snMspsNtpClientPeerHostDelay OBJECT-TYPE
SYNTAX NTPSignedTimeValue
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The estimated round-trip delay of the local clock
relative to the peer clock over the network path
between them, in seconds. The host determines the
value of this object using the NTP clock-filter
algorithm."
::= { snMspsNtpClientPeerEntry 10 }
snMspsNtpClientPeerEntryStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status object for this row. When a management
station is creating a new row, it should set the
value for snMspsNtpClientPeerPeerInetAddress at least, before the
row can be made active(1).
If an entry creation through error as worng-value it may be
reached the no of client entries support by the NTP implementation.
any set for the read-write objects in the table are needs to be
done by making the this objects as notinservice (2).
otherwise it have effect on next active only."
::= { snMspsNtpClientPeerEntry 11 }
snMspsNtpClientPeerSecureKeyID OBJECT-TYPE
SYNTAX Integer32 (1..65534)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ID of the key, to tell the secure NTP server which key is used."
DEFVAL { 1 }
::= { snMspsNtpClientPeerEntry 24 }
snMspsNtpClientPeerSecureAlgorithm OBJECT-TYPE
SYNTAX INTEGER {
des(1),
md5(2),
sha1(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Hash algorithm, which is used in secure NTP."
DEFVAL { 1 }
::= { snMspsNtpClientPeerEntry 25 }
snMspsNtpClientPeerSecureKey OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Secure key, which is used in secure NTP during authenti-cation.
The key is encrypted before saving in configuration."
::= { snMspsNtpClientPeerEntry 29 }
-- global setting for Secure NTP
snMspsNtpClientPeerSecure OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables support of secure NTP."
DEFVAL { false }
::= { snMspsNtpClient 5 }
snMspsNtpServerStatus OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To enable or disable NTP module Server module. If it is enabled
NTP Clients will get the time from the Servers.
"
DEFVAL { disabled }
::= { snMspsNtpServer 1 }
snMspsNtpServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsNtpServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides information on the ntp servers."
::= { snMspsNtpServer 2 }
snMspsNtpServerEntry OBJECT-TYPE
SYNTAX SnMspsNtpServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table contains the ip interfaces."
INDEX { ifIndex }
::= { snMspsNtpServerTable 1 }
SnMspsNtpServerEntry ::= SEQUENCE {
snMspsNtpServerEnable TruthValue,
snMspsNtpServerPort Integer32,
snMspsNtpServerSecureStatus TruthValue,
snMspsNtpServerKeyID Integer32,
snMspsNtpServerSecureAlgorithm INTEGER,
snMspsNtpServerSecureKey OCTET STRING,
snMspsNtpServerRowStatus RowStatus
}
snMspsNtpServerEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables NTP Server of an interface."
DEFVAL { false }
::= { snMspsNtpServerEntry 1 }
snMspsNtpServerPort OBJECT-TYPE
SYNTAX Integer32 (123 | 1025..36564)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The UDP port number on which the peer receives NTP
messages."
DEFVAL { 123 }
::= { snMspsNtpServerEntry 2 }
snMspsNtpServerSecureStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables NTP Secure Server of an interface."
DEFVAL { false }
::= { snMspsNtpServerEntry 3 }
snMspsNtpServerKeyID OBJECT-TYPE
SYNTAX Integer32 (1..65534)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Ntp key index."
DEFVAL { 1 }
::= { snMspsNtpServerEntry 4 }
snMspsNtpServerSecureAlgorithm OBJECT-TYPE
SYNTAX INTEGER {
des(1),
md5(2),
sha1(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Hash algorithm, which is used in secure NTP Server."
DEFVAL { 1 }
::= { snMspsNtpServerEntry 5 }
snMspsNtpServerSecureKey OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Secure key, which is used in secure NTP Server during authentication.
The key is encrypted before saving in configuration."
::= { snMspsNtpServerEntry 6 }
snMspsNtpServerRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status object for this row.
The writable columns in a row can not be changed if the row
is active. All columns MUST have a valid value before a row
can be activated.
"
::= { snMspsNtpServerEntry 7 }
-- the following OID is reserved for global Secure NTP Server
-- of this MIB module: { snMspsNtpServer 3 }
-- -------------------------------------------------------------
-- SNMPv2 Notifications
-- -------------------------------------------------------------
-- SN-MSPS-NTP-MIB 2101 ... 2150
snMspsTrapNTPInvalidConfiguration NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"Invalid NTP Configuration."
::= { snMspsTrapPrefix 2101 }
snMspsTrapNTPWrongPacketLength NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"Received NTP Packet with wrong length."
::= { snMspsTrapPrefix 2102 }
snMspsTrapNTPWrongSourceAddress NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"Received NTP Packet from wrong Source Address."
::= { snMspsTrapPrefix 2103 }
snMspsTrapNTPWrongKeyId NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"Received NTP Packet with wrong or missing Key Id."
::= { snMspsTrapPrefix 2104 }
snMspsTrapNTPAddAuthFail NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"Secure NTP failed to add authentication."
::= { snMspsTrapPrefix 2105 }
snMspsTrapNTPVerifyAuthFail NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"Received NTP Packet failed authentication."
::= { snMspsTrapPrefix 2106 }
snMspsTrapNTPKeyUpdate NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"SecureNTP Keys were updated."
::= { snMspsTrapPrefix 2107 }
-- -------------------------------------------------------------
-- END OF SNMPv2 Notifications
-- -------------------------------------------------------------
snMspsSntpAdminStatus OBJECT-TYPE
SYNTAX INTEGER { disabled (0), enabled (1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To enable or disable the sntp client module. All configuration will be
acitve only when the SNTP module is enabled"
DEFVAL { disabled }
::= { snMspsSntpClient 1 }
snMspsSntpClientVersion OBJECT-TYPE
SYNTAX INTEGER {version1 (1), version2 (2), version3 (3), version4 (4)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The SNTP client module can run in any one version 1, version 2,
version 3 or version 4. All the SNTP requests are sent out with the
current configured version number. When required, the administrator
can change the current version number"
DEFVAL { version4 }
::= { snMspsSntpClient 2 }
snMspsSntpClientAddressingMode OBJECT-TYPE
SYNTAX INTEGER {unicast (1), broadcast (2), multicast (3), anycast (4)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" unicast:
- SNTP client operates in a point-to-point fashion. A unicast
client sends a request to a designated server at its unicast address
and expects a reply from which it can determine the time and,
optionally, the round-trip delay and local clock ofsnMspset relative to
the server.
broadcast:
- SNTP client operates in a point-to-multipoint fashion. The SNTP
server uses an IP local broadcast address instead of a multicast
address. The broadcast address is scoped to a single subnet, while a
multicast address has Internet wide scope.
multicast:
- SNTP client operates in point-to-multipoint fashion. The SNTP server
uses a multicast group address to send unsolicited SNTP messages to
clients. The client listens on this address and sends no requests for
updates.
anycast:
- SNTP client operates in a multipoint-to-point fashion. The SNTP
client sends a request to a designated IPv4 or IPv6 local broadcast
address or multicast group address. One or more anycast servers reply
with their individual unicast addresses."
DEFVAL { unicast }
::= { snMspsSntpClient 3 }
snMspsSntpClientPort OBJECT-TYPE
SYNTAX Integer32 ( 123 | 1025..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The SNTP client module by default listens on well-know port number 123.
When required, the Administrator can change the SNTP Client port value
to non-default."
DEFVAL {123}
::= { snMspsSntpClient 4 }
snMspsSntpTimeDisplayFormat OBJECT-TYPE
SYNTAX INTEGER { hours (1), ampm (2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The administrator can view the system time in 12 hr AM/PM or 24
hours format. "
DEFVAL { hours }
::= { snMspsSntpClient 5 }
snMspsSntpAuthKeyId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Key Identifier is an integer identifying the cryptographic key used
to generate the message-authentication code"
::= { snMspsSntpClient 6 }
snMspsSntpAuthAlgorithm OBJECT-TYPE
SYNTAX INTEGER { none (0), md5 (1), des (2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When the NTP authentication scheme is implemented, the Key Identifier
and Message Digest fields contain the message authentication code (MAC)
information. Message Digest-5 (MD5) and Data Encryption Standard (DES)
are the Authentication algorithms that can be used. Default
Authentication supported is none"
DEFVAL { none }
::= { snMspsSntpClient 7 }
snMspsSntpAuthKey OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Authentication key is cryptographic key that is used to implement NTP
Authentication "
::= { snMspsSntpClient 8 }
snMspsSntpTimeZone OBJECT-TYPE
SYNTAX DisplayString (SIZE (6))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To set the system time zone with respect to UTC. ie plus indicates
forward time zone ( ahead of UTC Time eg: +05:30) and minus indicates
backward time zone (behind UTC time eg: -03:30). The valid format is
(+/-)HH:MM"
::= { snMspsSntpClient 9 }
snMspsSntpDSTStartTime OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Daylight saving time (DST) is a system of setting clocks ahead so
that both sunrise and sunset occur at a later hour. The effect is
additional daylight in the evening. Many countries observe DST,
although most have their own rules and regulations for when it begins
and ends. The dates of DST may change from year to year. The Valid
format [weekofmonth-weekofday-month,HH:MM].
Example:- Third-Mon-Apr,17:30 "
::= { snMspsSntpClient 10 }
snMspsSntpDSTEndTime OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Daylight saving time (DST) is a system of setting clocks ahead so
that both sunrise and sunset occur at a later hour. The effect is
additional daylight in the evening. Many countries observe DST,
although most have their own rules and regulations for when it begins
and ends. The dates of DST may change from year to year. The Valid
format [weekofmonth-weekofday-month,HH:MM].
Example:- Last-Sun-Nov,16:20 "
::= { snMspsSntpClient 11 }
snMspsSntpServerAutoDiscovery OBJECT-TYPE
SYNTAX INTEGER { disabled (0), enabled (1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The SNTP servers can be configured or discovered. When Auto Discover
is disabled, the SNTP client gets the time from the configured servers.
When Auto Discover is enabled, the SNTP client gets the time from servers
learnt through DHPC client. This is valid only in Unicast
Addressing mode."
DEFVAL { disabled }
::= { snMspsSntpClient 12 }
snMspsSntpUnicastPollInterval OBJECT-TYPE
SYNTAX Unsigned32 (16..16284)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of seconds between successive SNTP request transmissions. "
DEFVAL { 64 }
::= {snMspsSntpClient 13 }
snMspsSntpUnicastPollTimeout OBJECT-TYPE
SYNTAX Unsigned32 (1..30)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of seconds to wait for a response from a SNTP server
before considering the attempt to have 'timed out' "
DEFVAL { 5 }
::= {snMspsSntpClient 14 }
snMspsSntpUnicastPollRetry OBJECT-TYPE
SYNTAX Unsigned32 (0..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of times to retry a request to a SNTP server
that has not successfully responded. For example, assume this object
has been SET to a value of 2. When the SNTP client queries a given
server it will send 1 SNTP request frame. If that original attempt
fails, the client will retry up to a maximum of 2 more times before
giving up and attempting the next server."
DEFVAL { 3 }
::= { snMspsSntpClient 15 }
-- This table is for configuring the unicast server table
snMspsSntpUnicastServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsSntpUnicastServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table contains configured SNTP/NTP servers in the system."
::= {snMspsSntpClient 16 }
snMspsSntpUnicastServerEntry OBJECT-TYPE
SYNTAX SnMspsSntpUnicastServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Each entry in the table contains necessary information to
send SNTP request to the servers."
INDEX {snMspsSntpUnicastServerAddrType, snMspsSntpUnicastServerAddr }
::= { snMspsSntpUnicastServerTable 1 }
SnMspsSntpUnicastServerEntry ::= SEQUENCE {
snMspsSntpUnicastServerAddrType InetAddressType,
snMspsSntpUnicastServerAddr InetAddress,
snMspsSntpUnicastServerVersion INTEGER,
snMspsSntpUnicastServerPort Integer32,
snMspsSntpUnicastServerType INTEGER,
snMspsSntpUnicastServerLastUpdateTime DisplayString,
snMspsSntpUnicastServerTxRequests Counter32,
snMspsSntpUnicastServerRowStatus RowStatus
}
snMspsSntpUnicastServerAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Address type of the unicast server in the Unicast Addressing mode.
It can be IPv4 or IPv6 unicast address."
::= { snMspsSntpUnicastServerEntry 1 }
snMspsSntpUnicastServerAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" The unicast IPv4/IPv6 server address in the Unicast Addressing mode "
::= { snMspsSntpUnicastServerEntry 2}
snMspsSntpUnicastServerVersion OBJECT-TYPE
SYNTAX INTEGER {version3 (3),version4 (4)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the sntp version supported by the server"
::= { snMspsSntpUnicastServerEntry 3 }
snMspsSntpUnicastServerPort OBJECT-TYPE
SYNTAX Integer32 ( 123 | 1025..36564)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the sntp port on which the server is UP"
::= { snMspsSntpUnicastServerEntry 4 }
snMspsSntpUnicastServerType OBJECT-TYPE
SYNTAX INTEGER { primary (1), secondary (2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"In Unicast addressing mode, we can have primary and secondary servers.
This flag is to distinguish between primary and secondary server.
SNTP client sends request to different servers until it receives
successful response. This flag tells the order in which to query the
servers."
::= { snMspsSntpUnicastServerEntry 5 }
snMspsSntpUnicastServerLastUpdateTime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The local time when the system time was successful"
::= { snMspsSntpUnicastServerEntry 6 }
snMspsSntpUnicastServerTxRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SNTP request sent in the Unicast addressing mode."
::= { snMspsSntpUnicastServerEntry 7 }
snMspsSntpUnicastServerRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The activation of a row adds server entry. The destruction of a row
removes server entry"
::= {snMspsSntpUnicastServerEntry 8}
-- Broadcast objects
snMspsSntpSendRequestInBcastMode OBJECT-TYPE
SYNTAX INTEGER { disabled (0), enabled (1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"when enabled the sntp request will be sent to the broadcast server to
calculate the dealy time. This is valid only in broadcast
addressing mode"
DEFVAL { disabled }
::= { snMspsSntpClient 17 }
snMspsSntpPollTimeoutInBcastMode OBJECT-TYPE
SYNTAX Unsigned32 (1..30)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of seconds to wait for a response from a SNTP server before
considering the attempt to have 'timed out'. This is valid only in
broadcast addressing mode "
DEFVAL { 5 }
::= {snMspsSntpClient 18 }
snMspsSntpDelayTimeInBcastMode OBJECT-TYPE
SYNTAX Unsigned32 (1000..15000)
UNITS "microseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The broadcast server may send reply for the request. When the SNTP
client does get response from the boradcast server,
this value is taken as delay time "
DEFVAL { 8000 }
::= { snMspsSntpClient 19 }
-- snMspsSntpClient 20-22 reserved
-- Multicast Objects
snMspsSntpSendRequestInMcastMode OBJECT-TYPE
SYNTAX INTEGER { disabled (0), enabled (1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" when enabled the sntp request will be sent to the multicast server to
calculate the dealy time."
DEFVAL { disabled }
::= { snMspsSntpClient 23 }
snMspsSntpPollTimeoutInMcastMode OBJECT-TYPE
SYNTAX Unsigned32 (1..30)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of seconds to wait for a response from a SNTP
server before considering the attempt to have 'timed out'"
DEFVAL { 5 }
::= {snMspsSntpClient 24 }
snMspsSntpDelayTimeInMcastMode OBJECT-TYPE
SYNTAX Unsigned32 (1000..15000)
UNITS "microseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" this is taken as delay time when there is no response from the
multicast server "
DEFVAL { 8000 }
::= { snMspsSntpClient 25 }
snMspsSntpGrpAddrTypeInMcastMode OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The multicast group address can be configured by the administrator."
::= {snMspsSntpClient 26 }
snMspsSntpGrpAddrInMcastMode OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The multicast group address can be configured by the administrator."
::= {snMspsSntpClient 27 }
-- snMspsSntpClient 28-32 reserved
-- Anycast Objects
snMspsSntpAnycastPollInterval OBJECT-TYPE
SYNTAX Unsigned32 (16..16284)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of seconds between successive SNTP request transmissions."
DEFVAL { 64 }
::= {snMspsSntpClient 33 }
snMspsSntpAnycastPollTimeout OBJECT-TYPE
SYNTAX Unsigned32 (1..30)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of seconds to wait for a response from a SNTP server
before considering the attempt to have 'timed out'."
DEFVAL { 5 }
::= {snMspsSntpClient 34 }
snMspsSntpAnycastPollRetry OBJECT-TYPE
SYNTAX Unsigned32 (0..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of times to retry a request to a SNTP server
that has not successfully responded.
For example, assume this object has been SET to a value of 2.
When the SNTP client queries a given server it will send 1 SNTP
request frame. If that original attempt fails, the client will
retry up to a maximum of 2 more times before giving up and
attempting the next server."
DEFVAL { 3 }
::= { snMspsSntpClient 35 }
snMspsSntpServerTypeInAcastMode OBJECT-TYPE
SYNTAX INTEGER { broadcast (1), multicast (2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To set the type of servers to be used in Anycast addressing mode"
DEFVAL { broadcast }
::= { snMspsSntpClient 36 }
snMspsSntpGrpAddrTypeInAcastMode OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The address type of the server configured by the administrator"
::= {snMspsSntpClient 37 }
snMspsSntpGrpAddrInAcastMode OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The multicast group address can be configured by the administrator."
::= {snMspsSntpClient 38 }
-- --------------------------------------------------------------
-- Timezone and DST Sub-Group
-- --------------------------------------------------------------
snMspsTimezone OBJECT IDENTIFIER ::= { snMspsDst 1 }
snMspsTimezoneOffset OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Show/Set timezone offset (min)."
::= { snMspsTimezone 1 }
snMspsTimezoneDSTTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsTimezoneDSTEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table to configure DST entries."
::= { snMspsTimezone 2 }
snMspsTimezoneDSTEntry OBJECT-TYPE
SYNTAX SnMspsTimezoneDSTEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An Entry specifies the start and end of a daylight saving time."
INDEX { snMspsTimezoneDSTIndex }
::= { snMspsTimezoneDSTTable 1 }
SnMspsTimezoneDSTEntry ::= SEQUENCE {
snMspsTimezoneDSTIndex INTEGER,
snMspsTimezoneDSTName DisplayString,
snMspsTimezoneDSTType INTEGER,
snMspsTimezoneDSTDate DisplayString,
snMspsTimezoneDSTRecurring DisplayString,
snMspsTimezoneDSTRowStatus RowStatus
}
snMspsTimezoneDSTIndex OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The index of this entry."
::= { snMspsTimezoneDSTEntry 1 }
snMspsTimezoneDSTName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Shows and sets the name of this entry."
::= { snMspsTimezoneDSTEntry 2 }
snMspsTimezoneDSTType OBJECT-TYPE
SYNTAX INTEGER {
date(1),
recurring(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Describes whether it is a static or a recurring entry."
::= { snMspsTimezoneDSTEntry 3 }
snMspsTimezoneDSTDate OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Daylight saving time information:
year mmddhh(start) mmddhh(end)"
::= { snMspsTimezoneDSTEntry 4 }
snMspsTimezoneDSTRecurring OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Shows and sets the recurring information of this entry.
Null if it is not a recurring entry."
::= { snMspsTimezoneDSTEntry 5 }
snMspsTimezoneDSTRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This object indicates the status of this entry."
::= { snMspsTimezoneDSTEntry 6 }
snMspsPtpSystem OBJECT IDENTIFIER ::= { snMspsPtp 1 }
snMspsPtpTransparentClock OBJECT IDENTIFIER ::= { snMspsPtp 2 }
-- --------------------------------------------------------------
-- IEEE1588System Sub-Group
-- --------------------------------------------------------------
snMspsPtpMode OBJECT-TYPE
SYNTAX INTEGER {
off(1),
transparent-clock-mode (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable/disable IEEE 1588 mode."
DEFVAL { 1 }
::= { snMspsPtpSystem 1 }
snMspsPtpTimeZoneDiffTime OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (6))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the Timezone Diff Time with the UTC Time representation or
any other time representation. format is +/-HH:MM"
DEFVAL { "+00:00" }
::= { snMspsPtpSystem 2 }
-- --------------------------------------------------------------
-- IEEE1588 Transparent Clock Sub-Group
-- --------------------------------------------------------------
snMspsPtpTCPrimaryDomainNumber OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Domain identifier of the primary synchronization domain.
Clocks sharing a common domain identifier participate with
one another in communication of time information
and best master clock selection."
DEFVAL { 0 }
::= { snMspsPtpTransparentClock 1 }
snMspsPtpTCDelayMechanism OBJECT-TYPE
SYNTAX INTEGER {
end-to-end(1),
peer-to-peer(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Indicates the propagation delay measuring option used by the
port in computing peerMeanPathDelay. If the transparent clock
is an end-to-end transparent clock, delayMechanism shall be end-to-end(1).
If the transparent clock is a peer-to-peer transparent clock,
the value shall be peer-to-peer (2)."
DEFVAL { 1 }
::= { snMspsPtpTransparentClock 2 }
snMspsPtpTCSyntonized OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "TRUE if transparent clock should syntonize to master, otherwise syntonization is disabled."
DEFVAL { true }
::= { snMspsPtpTransparentClock 3 }
snMspsPtpTCVlanId OBJECT-TYPE
SYNTAX INTEGER (0..4095)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Vlan that is used for IEEE 1588"
DEFVAL { 1 }
::= { snMspsPtpTransparentClock 4 }
snMspsPtpTCOneStep OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "TRUE if transparent clock should use onestep, otherwise onestep is disabled."
DEFVAL { true }
::= { snMspsPtpTransparentClock 5 }
-- --------------------------------------------------------------
-- IEEE1588 Transparent Clock Port Table
-- --------------------------------------------------------------
snMspsPtpTCPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsPtpTCPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "IEEE 1588 Transparent Clock Port Table."
::= { snMspsPtpTransparentClock 100 }
snMspsPtpTCPortEntry OBJECT-TYPE
SYNTAX SnMspsPtpTCPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "IEEE 1588 Transparent Clock Port entry. "
INDEX { snMspsPtpTCPortIfIndex }
::= { snMspsPtpTCPortTable 1 }
SnMspsPtpTCPortEntry ::= SEQUENCE {
snMspsPtpTCPortIfIndex INTEGER,
snMspsPtpTCPortEnable INTEGER,
snMspsPtpTCPortLogMinPdelayReqInterval INTEGER,
snMspsPtpTCPortIngressLatency INTEGER,
snMspsPtpTCPortEgressLatency INTEGER,
snMspsPtpTCPortTransportMechanism INTEGER,
snMspsPtpTCPortMeanPathDelay INTEGER,
snMspsPtpTCPortFaultyFlag TruthValue
}
snMspsPtpTCPortIfIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Port on which IEEE 1588 Transparent Clock occurs on."
::= { snMspsPtpTCPortEntry 1 }
snMspsPtpTCPortEnable OBJECT-TYPE
SYNTAX INTEGER {
disable(1),
enable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable/disable IEEE 1588 Transparent Clock on port."
DEFVAL { 1 }
::= { snMspsPtpTCPortEntry 2 }
snMspsPtpTCPortLogMinPdelayReqInterval OBJECT-TYPE
SYNTAX INTEGER (0..5)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The logarithm to the base 2 of the minimum permitted mean time
interval between successive Pdelay_Req messages,
i.e., the minPdelayReqInterval, sent over a link."
DEFVAL { 0 }
::= { snMspsPtpTCPortEntry 3 }
snMspsPtpTCPortIngressLatency OBJECT-TYPE
SYNTAX INTEGER (0..50000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "IngressLantency:
<ingressTimestamp> = <ingressMeasuredTimestamp> + ingressLatency.
IngressLatency in nano seconds"
DEFVAL { 0 }
::= { snMspsPtpTCPortEntry 4 }
snMspsPtpTCPortEgressLatency OBJECT-TYPE
SYNTAX INTEGER (0..50000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "EgressLatency:
<egressTimestamp> = <egressMeasuredTimestamp> + egressLatency.
EgressLatency in nano seconds"
DEFVAL { 0 }
::= { snMspsPtpTCPortEntry 5 }
snMspsPtpTCPortTransportMechanism OBJECT-TYPE
SYNTAX INTEGER {
udp-ip-v4(1),
udp-ip-v6(2),
ethernet(3),
devicenet(4),
controlnet(5),
profinet(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Defines the transport protocols for PTP communications.
See IEEE 1588-2008 Table 3 for networkProtocol enumerations."
::= { snMspsPtpTCPortEntry 6 }
snMspsPtpTCPortMeanPathDelay OBJECT-TYPE
SYNTAX INTEGER (0..50000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If the value of delayMechanism is peer-to-peer (P2P),
the value is an estimate of the current one-way propagation
delay on the link, i.e., meanPathDelay, attached to this port
computed using the peer delay mechanism. Delay is expressed in nanoseconds
multiplied by 65536; a 1 second offset is expressed as 65536000000000.
If the value of the portDelayMechanism member is end-to-end (E2E), the value is zero."
::= { snMspsPtpTCPortEntry 7 }
snMspsPtpTCPortFaultyFlag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value shall be TRUE if the port is faulty and FALSE if the port is operating normally."
::= { snMspsPtpTCPortEntry 8 }
snMspsPnioEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled(2)
}
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION "The value enabled(1) will automatically run PROFINET.
The value disabled(2) will inhibit PROFINET."
::= { snMspsPnio 1 }
snMspsPnioInDataExchange OBJECT-TYPE
SYNTAX INTEGER {
online (1),
offline (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Show the state of PROFINETInDataExchange."
::= { snMspsPnio 2 }
snMspsPnioNameOfStation OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..240))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Name of Station of the device."
::= { snMspsPnio 3 }
snMspsPnioInDataExchangeControl OBJECT-TYPE
SYNTAX INTEGER {
allow-online (1),
force-to-offline (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "allow-online (1) allows the device to change in PROFINETInDataExchange online.
force-to-offline (2) force the device to PROFINETInDataExchange offline."
::= { snMspsPnio 4 }
snMspsPnioFaultMode OBJECT-TYPE
SYNTAX INTEGER {
latent(1),
evident(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Controls the PROFINET diagnostics behaviour for the PROFINET device:
latent (1) - The device doesn't notify any PROFINET fault
evident (2) - The device sets a fault if there is no connection to a PROFINET Controller
The PROFINET Device sets the snPnioMode automatically to 'evident (2)' if the
device ever established a connection to a PROFINET Controller"
::= { snMspsPnio 5 }
snMspsPnioResetIpCfgOnRestart OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "If true, resets the (temporary) IP configuration to 0.0.0.0
when the device restarts and then also resets this object
to false. Should thus be set to false whenever a new static
IP configuration is set to avoid it being reset on restart."
::= { snMspsPnio 6 }
snMspsPnioAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
notStarted(0),
off(1),
on(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION " Shows the next Mode of PROFINET after the next reboot takes place."
::= { snMspsPnio 9 }
snMspsPnioOperStatus OBJECT-TYPE
SYNTAX INTEGER {
notStarted(0),
off(1),
on(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION " Shows the current Mode of PROFINET."
::= { snMspsPnio 10 }
--HOLD_TIME_TABLE_BEGIN
snMspsPnioHoldTimeTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsPnioHoldTimeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table contains Hold Time information."
::= { snMspsPnio 20 }
snMspsPnioHoldTimeEntry OBJECT-TYPE
SYNTAX SnMspsPnioHoldTimeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Hold Time is stored."
INDEX { snMspsPnioHoldTimeEntryIndex }
::= { snMspsPnioHoldTimeTable 1 }
SnMspsPnioHoldTimeEntry ::= SEQUENCE {
snMspsPnioHoldTimeEntryIndex Unsigned32,
snMspsPnioHoldTimeValue INTEGER
}
snMspsPnioHoldTimeEntryIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Index of the Hold Time Entry"
::= { snMspsPnioHoldTimeEntry 1 }
snMspsPnioHoldTimeValue OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Hold Time of an entry"
::= { snMspsPnioHoldTimeEntry 2 }
--HOLD_TIME_TABLE_END
snMspsIpIp OBJECT IDENTIFIER ::= { snMspsIp 1 }
snMspsIpArp OBJECT IDENTIFIER ::= { snMspsIp 2 }
snMspsIpIcmp OBJECT IDENTIFIER ::= { snMspsIp 3 }
-- -------------------------------------------------------------
-- Textual Conventions
-- -------------------------------------------------------------
snMspsIpInLengthErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of packets received by IP with length less
than IP header length."
::= { snMspsIpIp 1 }
snMspsIpInCksumErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total Number of received packets those failed to pass
checksum verification."
::= { snMspsIpIp 2 }
snMspsIpInVersionErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of received packets with different IP
version from this entity."
::= { snMspsIpIp 3 }
snMspsIpInTTLErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of IP packets received at this entity with
'Time to Live' field equal to ZERO"
::= { snMspsIpIp 4 }
snMspsIpInOptionErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of IP packets received with improper options."
::= { snMspsIpIp 5 }
snMspsIpInBroadCasts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of IP broadcast packets received at this
entity."
::= { snMspsIpIp 6 }
snMspsIpOutGenErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of outgoing IP packets rejected due to general
problems like interface down, forwarding disabled etc."
::= { snMspsIpIp 7 }
snMspsIpOptProcEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indication as to if Option processing is active."
DEFVAL { enabled }
::= { snMspsIpIp 9 }
snMspsIpNumMultipath OBJECT-TYPE
SYNTAX Integer32 (1..16)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of multi-paths in the routing table."
DEFVAL { 2 }
::= { snMspsIpIp 10 }
snMspsIpLoadShareEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enabling this will distribute the load among
available equal cost multi-paths."
DEFVAL { disabled }
::= { snMspsIpIp 11 }
snMspsIpEnablePMTUD OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This Object Enables or Disables PMTU-D on all paths
globally. This MIB Object overrides the route-based and
application-level requests for PMTU-D. When this object
is set to disabled (2), PMTU-D is not done even if the
application requests to do so."
DEFVAL { disabled }
::= { snMspsIpIp 12 }
snMspsIpPmtuEntryAge OBJECT-TYPE
SYNTAX Integer32 (5..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the timeout in minutes, after which
the estimate of a PMTU is considered stale. After the
configured minutes the estimate of the PMTU is increased.
When Set to inifinity (255), detection in increase of
PMTU is not done."
DEFVAL { 10 }
::= { snMspsIpIp 13 }
-- the ICMP group
snMspsIcmpSendRedirectEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION " Allow sending ICMP Redirect Message "
DEFVAL { enabled }
::= { snMspsIpIcmp 1 }
snMspsIcmpSendUnreachableEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION " Allow sending ICMP Unreachable Message "
DEFVAL { enabled }
::= { snMspsIpIcmp 2 }
snMspsIcmpSendEchoReplyEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION " Allow sending ICMP Echo Reply Message "
DEFVAL { enabled }
::= { snMspsIpIcmp 3 }
snMspsIcmpNetMaskReplyEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION " Allow sending ICMP Net Mask Reply Message "
DEFVAL { enabled }
::= { snMspsIpIcmp 4 }
snMspsIcmpTimeStampReplyEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION " Allow sending ICMP Time stamp reply Message "
DEFVAL { enabled }
::= { snMspsIpIcmp 5 }
snMspsIcmpInDomainNameRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP Domain Name Requests
received."
::= { snMspsIpIcmp 6 }
snMspsIcmpInDomainNameReply OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP Domain Name Replies
received."
::= { snMspsIpIcmp 7 }
snMspsIcmpOutDomainNameRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP Domain Name Requests
send."
::= { snMspsIpIcmp 8 }
snMspsIcmpOutDomainNameReply OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP Domain Name Replies
send."
::= { snMspsIpIcmp 9 }
snMspsIcmpDirectQueryEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DNS Direct Query will be enabled or disabled
accordingly"
DEFVAL { disabled }
-- By default disabled because this is an Experimental Protocol.
::= { snMspsIpIcmp 10 }
snMspsDomainName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Domain Name of the system, used to send when
replies to DNS Direct Query."
::= { snMspsIpIcmp 11 }
snMspsTimeToLive OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of seconds untill which the name
can be cached."
::= { snMspsIpIcmp 12 }
snMspsIcmpInSecurityFailures OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP Security Failure messages
received."
::= { snMspsIpIcmp 13 }
snMspsIcmpOutSecurityFailures OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP Security Failure messages
sent."
::= { snMspsIpIcmp 14 }
snMspsIcmpSendSecurityFailuresEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allow sending Security Failure messages."
DEFVAL { enabled }
::= { snMspsIpIcmp 15 }
snMspsIcmpRecvSecurityFailuresEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allow Recieving Security Failure messages."
DEFVAL { enabled }
::= { snMspsIpIcmp 16 }
snMspsIpAddressTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsIpAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of IP addresses on every Interface."
::= { snMspsIpIp 18 }
snMspsIpAddressEntry OBJECT-TYPE
SYNTAX SnMspsIpAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The individual entry in the above table."
INDEX {
snMspsIpAddrTabAddress
}
::= { snMspsIpAddressTable 1 }
SnMspsIpAddressEntry ::=
SEQUENCE {
snMspsIpAddrTabIfaceId
Integer32,
snMspsIpAddrTabAddress
IpAddress,
snMspsIpAddrTabAdvertise
TruthValue,
snMspsIpAddrTabPreflevel
Integer32,
snMspsIpAddrTabStatus
RowStatus
}
snMspsIpAddrTabIfaceId OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface number to which the IP address
belongs to."
::= { snMspsIpAddressEntry 1 }
snMspsIpAddrTabAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"One of the router's IP addresses."
::= { snMspsIpAddressEntry 2 }
snMspsIpAddrTabAdvertise OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A flag indicating whether or not the address is
to be advertised."
::= { snMspsIpAddressEntry 3 }
snMspsIpAddrTabPreflevel OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The preferability of the address as a default
router address, relative to other router addresses on
the same subnet. A 32-bit, signed, twos-complement
integer, with higher values meaning more preferable."
::= { snMspsIpAddressEntry 4 }
snMspsIpAddrTabStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of this row, by which new entries may be
created, or old entries deleted from this table."
::= { snMspsIpAddressEntry 5 }
--List of Default Routers.
snMspsIpRtrLstTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsIpRtrLstEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"List of default router addresses. Used when system
functions as a host.Maintained as per RFC 1122."
::= { snMspsIpIp 19 }
snMspsIpRtrLstEntry OBJECT-TYPE
SYNTAX SnMspsIpRtrLstEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The individual entry in the above table."
INDEX { snMspsIpRtrLstAddress }
::= { snMspsIpRtrLstTable 1 }
SnMspsIpRtrLstEntry ::=
SEQUENCE {
snMspsIpRtrLstIface
Integer32,
snMspsIpRtrLstAddress
IpAddress,
snMspsIpRtrLstPreflevel
Integer32,
snMspsIpRtrLstStatic
TruthValue,
snMspsIpRtrLstStatus
RowStatus
}
snMspsIpRtrLstIface OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The interface via which the router could be
reached."
::= { snMspsIpRtrLstEntry 1 }
snMspsIpRtrLstAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An IP address of a default router."
::= { snMspsIpRtrLstEntry 2 }
snMspsIpRtrLstPreflevel OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The preferability of the RouterAddress as a default
router address, relative to other router addresses
on the same subnet."
::= { snMspsIpRtrLstEntry 3 }
snMspsIpRtrLstStatic OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This entry states how the default router address
was learned."
::= { snMspsIpRtrLstEntry 4 }
snMspsIpRtrLstStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row, by which new entries may be
created, or old entries deleted from this table."
::= { snMspsIpRtrLstEntry 5 }
-- IPIF table
snMspsIpifTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsIpifEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IP interface table which maintains the interface specific configurable parameters of IP."
::= { snMspsIpIp 23 }
snMspsIpifEntry OBJECT-TYPE
SYNTAX SnMspsIpifEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A particular interface specific IP information."
INDEX {
snMspsIpifIndex
}
::= { snMspsIpifTable 1 }
SnMspsIpifEntry ::=
SEQUENCE {
snMspsIpifIndex
Integer32,
snMspsIpifMaxReasmSize
Integer32,
snMspsIpifIcmpRedirectEnable
INTEGER,
snMspsIpifDrtBcastFwdingEnable
INTEGER,
snMspsIpifProxyArpAdminStatus
INTEGER
}
snMspsIpifIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index value which identifies the
interface to which this entry is applicable. The
interface identified by a particular value of this
index is the same interface as identified by the same
value of ifIndex in MIB II."
::= { snMspsIpifEntry 1 }
snMspsIpifMaxReasmSize OBJECT-TYPE
SYNTAX Integer32 (1024..33280)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum size of the fragmented IP datagram received
on this interface that can be considered for reassembly."
::= { snMspsIpifEntry 2 }
snMspsIpifIcmpRedirectEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enabling or Diabling of the ICMP redirect messages on an
interface basis."
::= { snMspsIpifEntry 3 }
snMspsIpifDrtBcastFwdingEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enabling of Directed broadcast forwarding on that
interface."
::= { snMspsIpifEntry 4 }
snMspsIpifProxyArpAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or Disables Proxy ARP Feature for that
interface. By default, this object
should have the value disabled(2)."
DEFVAL { disabled }
::= { snMspsIpifEntry 5 }
snMspsArpCacheTimeout OBJECT-TYPE
SYNTAX Integer32 (30..86400)
MAX-ACCESS read-write
STATUS current
DESCRIPTION " Time after which the entry in cache is deleted "
DEFVAL { 7200 }
::= { snMspsIpArp 1 }
snMspsArpCachePendTime OBJECT-TYPE
SYNTAX Integer32 (30..3000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION " Time for which an unresolved entry will be
held until response is received "
DEFVAL { 30 }
::= { snMspsIpArp 2 }
snMspsArpMaxRetries OBJECT-TYPE
SYNTAX Integer32 (2..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION " Maximum number of retry attempts before aborting
resolving "
DEFVAL { 3 }
::= { snMspsIpArp 3 }
snMspsArpTableScanType OBJECT-TYPE
SYNTAX Integer32 (0..16777215)
MAX-ACCESS read-write
STATUS current
DESCRIPTION " value of zero(0) disable arp table scan "
DEFVAL { 4 }
::= { snMspsIpArp 4 }
snMspsIpProxyArpClient OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enables or disables Proxy ARP Client Feature.
By default, this object should have the value
disabled(2)."
::= { snMspsIpIp 25 }
snMspsDcp OBJECT-TYPE
SYNTAX INTEGER {
dcp-read-write (1),
dcp-read-only (2),
dcp-off (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value dcp-read-write (1) will automatically run DCP (Detection & Configuration Protocoll).
The value dcp-read-only allows DCP only to read parameters.
The value dcp-off(3) will inhibit DCP."
::= { snMspsIpIp 30 }
snMspsAgentReceiveOnAllKnownVLANs OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Setting AgentReceiveOnAllKnownVLANs to Enable(1)
enables the reception of IP traffic for the agent on all VLANs.
This means the agent accepts incoming connections on all the VLANs.
For outgoing traffic like sending SNMP traps and
connection to the e-mail server the Agent VLAN is used."
::= { snMspsIpIp 31 }
-- It adds IP protocol independence.
snMspsInetStaticRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsInetStaticRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entity's IP Static Routing table. This table displays
both active and inactive static routes"
::= { snMspsIpIp 32 }
snMspsInetStaticRouteEntry OBJECT-TYPE
SYNTAX SnMspsInetStaticRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A particular route to a particular destination, under a
particular policy (as reflected in the
snMspsInetStaticRoutePolicy object).
Implementers need to be aware that if the total number
of elements (octets or sub-identifiers) in
snMspsInetStaticRouteDest, snMspsInetStaticRoutePolicy, and
snMspsInetStaticRouteNextHop exceeds 111, then OIDs of column
instances in this table will have more than 128 sub-
identifiers and cannot be accessed using SNMPv1,
SNMPv2c, or SNMPv3."
INDEX {
snMspsInetStaticRouteDestType,
snMspsInetStaticRouteDest,
snMspsInetStaticRoutePfxLen,
snMspsInetStaticRoutePolicy,
snMspsInetStaticRouteNextHopType,
snMspsInetStaticRouteNextHop
}
::= { snMspsInetStaticRouteTable 1 }
SnMspsInetStaticRouteEntry ::= SEQUENCE {
snMspsInetStaticRouteDestType InetAddressType,
snMspsInetStaticRouteDest InetAddress,
snMspsInetStaticRoutePfxLen InetAddressPrefixLength,
snMspsInetStaticRoutePolicy OBJECT IDENTIFIER,
snMspsInetStaticRouteNextHopType InetAddressType,
snMspsInetStaticRouteNextHop InetAddress,
snMspsInetStaticRouteIfIndex InterfaceIndexOrZero,
snMspsInetStaticRouteType INTEGER,
snMspsInetStaticRouteProto IANAipRouteProtocol,
snMspsInetStaticRouteAge Gauge32,
snMspsInetStaticRouteNextHopAS InetAutonomousSystemNumber,
snMspsInetStaticRouteMetric1 Integer32,
snMspsInetStaticRouteStatus RowStatus
}
snMspsInetStaticRouteDestType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The type of the snMspsInetStaticRouteDest address, as defined
in the InetAddress MIB.
Only those address types that may appear in an actual
routing table are allowed as values of this object.
IPv4 and IPv6 Static Routes are supported."
::= { snMspsInetStaticRouteEntry 1 }
snMspsInetStaticRouteDest OBJECT-TYPE
SYNTAX InetAddress (SIZE(16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The destination IP address of this route.
The type of this address is determined by the value of
the snMspsInetStaticRouteDestType object. IPv4 and IPv6
Static Routes are supported.
The values for the index objects snMspsInetStaticRouteDest and
snMspsInetStaticRoutePfxLen must be consistent. When the value
of snMspsInetStaticRouteDest (excluding the zone index, if one
is present) is x, then the bitwise logical-AND
of x with the value of the mask formed from the
corresponding index object snMspsInetStaticRoutePfxLen MUST be
equal to x. If not, then the index pair is not
consistent and an inconsistentName error must be
returned on SET or CREATE requests."
::= { snMspsInetStaticRouteEntry 2 }
snMspsInetStaticRoutePfxLen OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the number of leading one bits that form the
mask to be logical-ANDed with the destination address
before being compared to the value in the
snMspsInetStaticRouteDest field.
The values for the index objects snMspsInetStaticRouteDest and
snMspsInetStaticRoutePfxLen must be consistent. When the value
of snMspsInetStaticRouteDest (excluding the zone index, if one
is present) is x, then the bitwise logical-AND
of x with the value of the mask formed from the
corresponding index object snMspsInetStaticRoutePfxLen MUST be
equal to x. If not, then the index pair is not
consistent and an inconsistentName error must be
returned on SET or CREATE requests."
::= { snMspsInetStaticRouteEntry 3 }
snMspsInetStaticRoutePolicy OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object is an opaque object without any defined
semantics. Its purpose is to serve as an additional
index that may delineate between multiple entries to
the same destination. The value { 0 0 } shall be used
as the default value for this object."
::= { snMspsInetStaticRouteEntry 4 }
snMspsInetStaticRouteNextHopType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The type of the snMspsInetStaticRouteNextHop address, as
defined in the InetAddress MIB.
Value should be set to unknown(0) for non-remote
routes.
Only those address types that may appear in an actual
routing table are allowed as values of this object.
Only IPv4 Static Routes are supported currently"
::= { snMspsInetStaticRouteEntry 5 }
snMspsInetStaticRouteNextHop OBJECT-TYPE
SYNTAX InetAddress (SIZE(16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"On remote routes, the address of the next system en
route. For non-remote routes, a zero length string.
The type of this address is determined by the value of
the snMspsInetStaticRouteNextHopType object.
Only IPv4 Static Routes are supported currently"
::= { snMspsInetStaticRouteEntry 6 }
snMspsInetStaticRouteIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The ifIndex value that identifies the local interface
through which the next hop of this route should be
reached.
For active static routes this object will have a valid
Interface index. For in-active static routes this object
will have invalid interface index"
::= { snMspsInetStaticRouteEntry 7 }
snMspsInetStaticRouteType OBJECT-TYPE
SYNTAX INTEGER {
other (1), -- not specified by this MIB
reject (2), -- route that discards traffic and
-- returns ICMP notification
local (3), -- local interface
remote (4), -- remote destination
blackhole(5) -- route that discards traffic
-- silently
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of route. Note that local(3) refers to a
route for which the next hop is the final destination;
remote(4) refers to a route for which the next hop is
not the final destination.
Routes that do not result in traffic forwarding or
rejection should not be displayed, even if the
implementation keeps them stored internally.
reject(2) refers to a route that, if matched, discards
the message as unreachable and returns a notification
(e.g., ICMP error) to the message sender. This is used
in some protocols as a means of correctly aggregating
routes.
blackhole(5) refers to a route that, if matched,
discards the message silently."
::= { snMspsInetStaticRouteEntry 8 }
snMspsInetStaticRouteProto OBJECT-TYPE
SYNTAX IANAipRouteProtocol
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The routing mechanism via which this route was learned.
Inclusion of values for gateway routing protocols is
not intended to imply that hosts should support those
protocols.
Dyanmic routes are not supported in this MIB Table. This
table supports only active and inactive of IPv4 and IPV6
Static Routes."
::= { snMspsInetStaticRouteEntry 9 }
snMspsInetStaticRouteAge OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of seconds since this route was last updated
or otherwise determined to be correct. Note that no
semantics of 'too old' can be implied, except through
knowledge of the routing protocol by which the route
was learned."
::= { snMspsInetStaticRouteEntry 10 }
snMspsInetStaticRouteNextHopAS OBJECT-TYPE
SYNTAX InetAutonomousSystemNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Autonomous System Number of the Next Hop. The
semantics of this object are determined by the routing-
protocol specified in the route's snMspsInetStaticRouteProto
value. When this object is unknown or not relevant, its
value should be set to zero."
DEFVAL { 0 }
::= { snMspsInetStaticRouteEntry 11 }
snMspsInetStaticRouteMetric1 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The primary routing metric for this route. The
semantics of this metric are determined by the routing-
protocol specified in the route's snMspsInetStaticRouteProto
value. If this metric is not used, its value should be
set to -1."
DEFVAL { -1 }
::= { snMspsInetStaticRouteEntry 12 }
snMspsInetStaticRouteStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The row status variable, used according to row
installation and removal conventions.
A row entry cannot be modified when the status is
marked as active(1)."
::= { snMspsInetStaticRouteEntry 13 }
snMspsRcdpMode OBJECT-TYPE
SYNTAX INTEGER {
rcdp-off (0),
rcdp-read-only (1),
rcdp-read-write (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value rcdp-read-write(2) allows RCDP to read and write parameters.
The value rcdp-read-only(1) allows RCDP only read parameters. The value rcdp-off(0) will inhibit RCDP."
::= { snMspsIpIp 33 }
snMspsTraceRouteConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsTraceRouteConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"TraceRoute Configuration Table"
::= { snMspsIpIp 40 }
snMspsTraceRouteConfigEntry OBJECT-TYPE
SYNTAX SnMspsTraceRouteConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table Contains the configuration information about a particular
traceroute operation."
INDEX {
snMspsTraceRouteConfigDestType,
snMspsTraceRouteConfigDest
}
::= { snMspsTraceRouteConfigTable 1 }
SnMspsTraceRouteConfigEntry ::= SEQUENCE {
snMspsTraceRouteConfigDestType InetAddressType,
snMspsTraceRouteConfigDest InetAddress,
snMspsTraceRouteConfigOperStatus INTEGER,
snMspsTraceRouteConfigError INTEGER,
snMspsTraceRouteConfigRowStatus RowStatus
}
snMspsTraceRouteConfigDestType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Address Type of trace route destination specified in
snMspsTraceRouteConfigDest"
::= { snMspsTraceRouteConfigEntry 1 }
snMspsTraceRouteConfigDest OBJECT-TYPE
SYNTAX InetAddress (SIZE(16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The destination address to which the route has to
be traced."
::= { snMspsTraceRouteConfigEntry 2 }
snMspsTraceRouteConfigOperStatus OBJECT-TYPE
SYNTAX INTEGER {
notStarted (1),
inProgress (2),
completed (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current Status for the traceroute operation."
::= { snMspsTraceRouteConfigEntry 3 }
snMspsTraceRouteConfigError OBJECT-TYPE
SYNTAX INTEGER {
noError (0),
destinationUnreachable (1),
addressUnreachable (2),
ttlExceeded (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Error Status after completion of traceroute operation."
::= { snMspsTraceRouteConfigEntry 4 }
snMspsTraceRouteConfigRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Creates and Initiates the traceroute operation for the
destination snMspsTraceRouteConfigDest. Log for the
traceroute operation can be viewed in snMspsTraceRouteTable."
::= { snMspsTraceRouteConfigEntry 5 }
snMspsTraceRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsTraceRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table containing Trace route result for the destination
specified in snMspsTraceRouteConfigTable."
::= { snMspsIpIp 43 }
snMspsTraceRouteEntry OBJECT-TYPE
SYNTAX SnMspsTraceRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the information about the
intermediate nodes on the way to the destination
specified in snMspsTraceRouteConfigTable."
INDEX {
snMspsTraceRouteDestType,
snMspsTraceRouteDest,
snMspsTraceRouteHopCount
}
::= { snMspsTraceRouteTable 1 }
SnMspsTraceRouteEntry ::= SEQUENCE {
snMspsTraceRouteDestType InetAddressType,
snMspsTraceRouteDest InetAddress,
snMspsTraceRouteHopCount Unsigned32,
snMspsTraceRouteIntermHopType InetAddressType,
snMspsTraceRouteIntermHop InetAddress,
snMspsTraceReachTime1 Integer32,
snMspsTraceReachTime2 Integer32,
snMspsTraceReachTime3 Integer32
}
snMspsTraceRouteDestType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Address Type of trace route destination specified in
snMspsTraceRouteDest"
::= { snMspsTraceRouteEntry 1 }
snMspsTraceRouteDest OBJECT-TYPE
SYNTAX InetAddress (SIZE(16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The destination address to which the route has to
be traced."
::= { snMspsTraceRouteEntry 2 }
snMspsTraceRouteHopCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Count of the Number of Hops required to reach
the intermediate node snMspsTraceRouteIntermHop."
::= { snMspsTraceRouteEntry 3 }
snMspsTraceRouteIntermHopType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Address type for the snMspsTraceRouteIntermHop"
::= { snMspsTraceRouteEntry 4 }
snMspsTraceRouteIntermHop OBJECT-TYPE
SYNTAX InetAddress (SIZE(16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Address of the intermediate node or the end destination
snMspsTraceRouteDest."
::= { snMspsTraceRouteEntry 5 }
snMspsTraceReachTime1 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time in milli seconds, required to reach the
intermediate node snMspsTraceRouteIntermHop.
The value of '-1' denotes that the response was
not received from the node snMspsTraceRouteDest."
::= { snMspsTraceRouteEntry 6 }
snMspsTraceReachTime2 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time in milli seconds, required to reach the
intermediate node snMspsTraceRouteIntermHop
for the second time.
The value of '-1' denotes that the response was
not received from the node snMspsTraceRouteDest."
::= { snMspsTraceRouteEntry 7 }
snMspsTraceReachTime3 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time in milli seconds, required to reach the
intermediate node snMspsTraceRouteIntermHop
for the third time.
The value of '-1' denotes that the response was
not received from the node snMspsTraceRouteDest."
::= { snMspsTraceRouteEntry 8 }
-- Unused snMspsIpIp 44-49
snMspsIpNextHopArpKeepAliveStatus OBJECT-TYPE
SYNTAX INTEGER {
not-supported (0),
enabled (1),
disabled (2),
dynamictostatic (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting of Value enabled(1), enables dynamic ARP Resolution for all the
nexthop gateway addresses of the best routes present in the system and prevents ARP Table flushing.
Dynamic ARP Resolution will be triggered every
snMspsIpNextHopArpKeepAliveTime interval, for all the unresolved
nexthop gateway addresses present in the system.
Setting of Value dynamictostatic(3), does not prevent ARP table flushing, but converts the ARP entries for
dynamically discovered nexthop gateway addresses to static ARP entries. Validity of these entries will
then be checked cyclically.
Setting of Value disabled(2), disables this feature."
DEFVAL { disabled }
::= { snMspsIpIp 50 }
snMspsIpNextHopArpKeepAliveTime OBJECT-TYPE
SYNTAX Integer32 (30..86400)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Time after which the dynamic ARP resolution will be triggered if
snMspsIpNextHopArpKeepAliveStatus is true."
DEFVAL { 30 }
::= { snMspsIpIp 51 }
snMspsIpSingleHopInterVlanRouting OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Status of the SingleHopInterVlanRouting -
which enables routing in between connected/local routes
even if the routing is not enabled/supported"
DEFVAL { 2 }
::= { snMspsIpIp 52 }
-- -------------------------------------------------------------
-- Textual Conventions
-- -------------------------------------------------------------
snMspsIpACDModeStatus OBJECT-TYPE
SYNTAX INTEGER {
acdModeStatusDisabled (0),
acdModeStatusEnabled (1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether IPV4 Address Collision Detection is activated or not for all IP interfaces."
DEFVAL { acdModeStatusEnabled }
::= { snMspsIpACD 1 }
snMspsIpACDDefendingMode OBJECT-TYPE
SYNTAX INTEGER {
acdDefendingModeNeverGiveUp (0),
acdDefendingModeAttemptToDefend (1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies defending mode of IPV4 Address Collision Detection for all IP interfaces."
DEFVAL { acdDefendingModeNeverGiveUp }
::= { snMspsIpACD 2 }
-- -------------------------------------------------------------
-- Textual Conventions
-- -------------------------------------------------------------
PortLaMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Defines how a Port Channel does channeling.
lacp(1) - place the port into passive
negotiation state, in which the
port waits for its peer to
initiate negotiation.
manual(2) - force the port to enable
channeling.
disable(3) - channeling is disabled."
SYNTAX INTEGER {
lacp(1),
manual(2),
disable(3)
}
LacpKey ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"The Actor or Partner Key value."
SYNTAX Integer32 (0..65535)
LacpState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The Actor and Partner State values from the LACPDU."
SYNTAX BITS {
lacpActivity(0),
lacpTimeout(1),
aggregation(2),
synchronization(3),
collecting(4),
distributing(5),
defaulted(6),
expired(7)
}
-- ------------------------------------------------------------------
-- The La System Group
-- ------------------------------------------------------------------
-- snMspsLa 1-3 reserverd
snMspsLaStatus OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the Link Aggregation Module administrative status as
enabled or disabled. The module can be enabled only when this
object is set to 'enabled'."
::= { snMspsLa 4 }
snMspsLaActorSystemID OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A 6-octet read-write MAC address value used as a unique
identifier for the System."
::= { snMspsLa 5 }
snMspsLaMaxPortChannels OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This Object specifies the maximum number of
Port-channels Present in the system"
::= { snMspsLa 6 }
-- snMspsLa 7-9 reserved
-- ------------------------------------------------------------------
-- Port Channel Table
-- ------------------------------------------------------------------
snMspsLaPortChannelTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsLaPortChannelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A Port-channel is created through ifMain table.
After the creation of the port-channel, corresponding logical
interface will be created in the ifMain table.
This Port-channel table is indexed through Key values and allows to
configure link selection policy and the Mac address for
the port-channel. All other objects in this table displays
the details of the port-channel"
::= { snMspsLa 10 }
snMspsLaPortChannelEntry OBJECT-TYPE
SYNTAX SnMspsLaPortChannelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"There is one entry in this table for each created
port-channel port"
INDEX { snMspsLaPortChannelIfIndex }
::= { snMspsLaPortChannelTable 1 }
SnMspsLaPortChannelEntry ::= SEQUENCE {
snMspsLaPortChannelIfIndex InterfaceIndex,
snMspsLaPortChannelGroup LacpKey,
snMspsLaPortChannelAdminMacAddress MacAddress,
snMspsLaPortChannelMacSelection INTEGER,
snMspsLaPortChannelMode PortLaMode,
snMspsLaPortChannelPortCount Integer32,
snMspsLaPortChannelActivePortCount Integer32,
snMspsLaPortChannelSelectionPolicy INTEGER,
snMspsLaPortChannelDefaultPortIndex InterfaceIndexOrZero,
snMspsLaPortChannelMaxPorts Integer32,
snMspsLaPortChannelPortList PortList,
snMspsLaPortChannelName DisplayString
}
snMspsLaPortChannelIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifIndex of the port-channel(Aggregator's
interface index). "
::= { snMspsLaPortChannelEntry 1 }
snMspsLaPortChannelGroup OBJECT-TYPE
SYNTAX LacpKey
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index that uniquely identifies an entry in this table. "
::= { snMspsLaPortChannelEntry 2 }
snMspsLaPortChannelAdminMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used for configuring MacAddress that is
to be used by the port-channel when snMspsLaPortChannelMacSelection
is force.
WARNING:The value configured should not conflict
with the MAC address of system ports that are not configured
to select this port-channel."
::= { snMspsLaPortChannelEntry 3 }
snMspsLaPortChannelMacSelection OBJECT-TYPE
SYNTAX INTEGER { dynamic(1), force(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the MAC address selection method for
for the port-channel.
Dynamic - System will reserve certain MAC address
for aggregators. These MAC address are
derived from BaseMac. If this object is
configured as dynamic, the system will
allocate MAC address from this pool.
Force - Port-channel MAC address configured through
snMspsLaPortChannelAdminMacAddress is used.
The value can be changed to Force only after configuring
a valid MAC address in snMspsLaPortChannelAdminMacAddress."
DEFVAL { 1 }
::= { snMspsLaPortChannelEntry 4 }
snMspsLaPortChannelMode OBJECT-TYPE
SYNTAX PortLaMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current Operating Channel Mode of the port
Lacp(1) - forcing the port to negotiate with the
partner.
manual(2) - force the port to enable channeling (Manual).
disable(3) - channeling is disabled."
::= { snMspsLaPortChannelEntry 5 }
snMspsLaPortChannelPortCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ports actually configured to the port-channel"
::= { snMspsLaPortChannelEntry 6 }
snMspsLaPortChannelActivePortCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object will give the number of ports that are attached to the
port-channel and actively carrying data traffic on the link."
::= { snMspsLaPortChannelEntry 7 }
snMspsLaPortChannelSelectionPolicy OBJECT-TYPE
SYNTAX INTEGER {
macSrc(1),
macDst(2),
macSrcDst(3),
ipSrc(4),
ipDst(5),
ipSrcDst(6),
vlanId(7),
isid(8),
macSrcVid(9),
macDstVid(10),
macSrcDstVid(11),
mplsVcLabel(12),
mplsTunnelLabel(13),
mplsVcTunnelLabel(14)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Link selection policy to be used by the port-channel.
Selection policy isid implies selection based on Service-instance
and is applicable only in Provider BackBone bridge."
DEFVAL {macSrcDst}
::= {snMspsLaPortChannelEntry 8}
snMspsLaPortChannelDefaultPortIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ifIndex of the default port that gets attached to the
aggregator. A value of 0 means there is no default port for
this port-channel.
If this object is set to 0, it will remove the current default
port from the aggregator.
To change the default port of an aggregator, first reset the
object to 0 and then set the new ifIndex as default port."
DEFVAL { 0 }
::= { snMspsLaPortChannelEntry 9 }
snMspsLaPortChannelMaxPorts OBJECT-TYPE
SYNTAX Integer32 (2..8)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the maximun number of
ports that can attach to a port-channel."
DEFVAL { 8 }
::= { snMspsLaPortChannelEntry 10 }
snMspsLaPortChannelPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The complete set of ports currently associated with
this Aggregator. Each bit set in this list represents
an Actor Port member of this Link Aggregation"
::= { snMspsLaPortChannelEntry 11 }
snMspsLaPortChannelName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Name of the aggregation."
::= { snMspsLaPortChannelEntry 12 }
-----------------------------------------------------------
-- LA Port Table objects Extension Table
-- ------------------------------------------------------------------
snMspsXLaPortChannelTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsXLaPortChannelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This augment table contains additional objects
for snMspsLaPortChannelTable."
::= { snMspsLa 11 }
snMspsXLaPortChannelEntry OBJECT-TYPE
SYNTAX SnMspsXLaPortChannelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains management information applicable to
an interface."
AUGMENTS { snMspsLaPortChannelEntry }
::= { snMspsXLaPortChannelTable 1 }
SnMspsXLaPortChannelEntry ::=
SEQUENCE {
snMspsXLaPortChannelRowStatus
RowStatus
}
snMspsXLaPortChannelRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Row status of this entry which
is used only in two scenarios.
1. CREATE_AND_WAIT
2. DESTROY.
Where '1' will be used during port creation
and '2' will be used during port deletion."
::= { snMspsXLaPortChannelEntry 1 }
-- -------------------------------------------------------------
-- The Aggregation Port Group
-- -------------------------------------------------------------
snMspsLaPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsLaPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains objects to set the port lacp mode
of dot3adAggPortTable."
::={snMspsLa 12 }
snMspsLaPortEntry OBJECT-TYPE
SYNTAX SnMspsLaPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table is for each physical port that participates
in Link Aggregation which can be either aggregatable or individual.
This table is indexed by the PortIndex."
INDEX {snMspsLaPortIndex }
::={snMspsLaPortTable 1 }
SnMspsLaPortEntry ::=
SEQUENCE {
snMspsLaPortIndex InterfaceIndex,
snMspsLaPortMode PortLaMode,
snMspsLaPortBundleState INTEGER,
snMspsLaPortActorResetAdminState LacpState,
snMspsLaPortAggregateWaitTime TimeTicks,
snMspsLaPortPartnerResetAdminState LacpState,
snMspsLaPortActorAdminPort Integer32,
snMspsLaPortRestoreMtu Integer32,
snMspsLaPortSelectAggregator INTEGER,
snMspsLagConfigPortLACPLMEnable INTEGER
}
snMspsLaPortIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifIndex of the port"
::={snMspsLaPortEntry 1 }
snMspsLaPortMode OBJECT-TYPE
SYNTAX PortLaMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to enable LACP , disable LACP or manually
aggregate a port"
::={snMspsLaPortEntry 2 }
snMspsLaPortBundleState OBJECT-TYPE
SYNTAX INTEGER {
upInBndl(0),
standby(1),
down(2),
upIndividual(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This read-only object is used to display the port state in aggregation
upInBndl(0) - The port is operationally up and actively
takes part in aggregation.
standby(1) - The port is capable of joining in
aggregation group, when any of the ports in
aggregation group goes down.
down(2) - The port is operationally down in lower layers.
or the port is operational in lower layers
but temporarily not able to participate
in aggregation because of different partner
information in the same group.
upIndividual(3) - The port is operating individually and
is not taking part in aggregation."
::={snMspsLaPortEntry 3}
snMspsLaPortActorResetAdminState OBJECT-TYPE
SYNTAX LacpState
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A string of 8 bits,corresponding to the administrative values
of Actor_State as transmitted by the Actor in LACPDUs.
The first bit corresponds to bit 0 of Actor_State (LACP_Activity),
the second bit corresponds to bit 1 (LACP_Timeout),the third bit
corresponds to bit 2 (Aggregation),the fourth bit corresponds to
bit 3 (Synchronization),the fifth bit corresponds to bit 4
(Collecting),the sixth bit corresponds to bit 5 (Distributing),
the seventh bit corresponds to bit 6 (Defaulted),and the eighth
bit corresponds to bit 7 (Expired).
This object allows the RESET of the values of Actor LACP_Activity,
LACP_Timeout and Aggregation.
Get operation on this object returns the current Port State of
the Actor"
::={snMspsLaPortEntry 4 }
snMspsLaPortAggregateWaitTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Duration of the port to attach to the PortChannel."
DEFVAL { 2 }
::={snMspsLaPortEntry 5 }
snMspsLaPortPartnerResetAdminState OBJECT-TYPE
SYNTAX LacpState
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A string of 8 bits,corresponding to the administrative values
of Partner_State.The first bit corresponds to bit 0 of Partner_State
(LACP_Activity),the second bit corresponds to bit 1 (LACP_Timeout),
the third bit corresponds to bit 2 (Aggregation),the fourth bit
corresponds to bit 3 (Synchronization),the fifth bit corresponds to
bit 4 (Collecting),the sixth bit corresponds to bit 5 (Distributing),
the seventh bit corresponds to bit 6 (Defaulted),and the eighth
bit corresponds to bit 7 (Expired).
This object allows the RESET of the values of Partner LACP_Activity,
LACP_Timeout and Aggregation.
Get operation on this object returns zeros for
the Partner administrative values"
::={snMspsLaPortEntry 6 }
snMspsLaPortActorAdminPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port number used as dot3adAggPortActorPort and is
communicated in LACPDUs as the Actor_Port."
::={snMspsLaPortEntry 7 }
snMspsLaPortRestoreMtu OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Restore mtu stores the original MTU of the port
before getting aggregated to port channel.
A SET on the MIB object is not allowed for SNMP users.
This operation is allowed only during config-save-restore
operation , during system initialization."
::={snMspsLaPortEntry 8 }
snMspsLaPortSelectAggregator OBJECT-TYPE
SYNTAX INTEGER {
static(0),
dynamic(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This read-only object is used to display whether the port participates
in dynamic aggregator selection. The default will be static aggregation
selection.
static(0) - The port is involved only in static aggregation.
i.e. the port can be a member of only the aggregation
to which it is configured.
dynamic(1) - The port participates in dynamic aggregation
selection. i.e. the port will be a part of best
aggregation selected based on System id and Admin key.
This object is set to 'dynamic' once the port is configured as a default
port of a port channel."
::={snMspsLaPortEntry 9}
snMspsLagConfigPortLACPLMEnable OBJECT-TYPE
SYNTAX INTEGER {
off (1),
lacp-lm-on (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Configure LACP on Port:
off(1) - off ,
lacp-lm-on(2) - lacp link monitoring on."
::= { snMspsLaPortEntry 10 }
-- -------------------------------------------------------------
-- END OF Aggregation Port Group
-- -------------------------------------------------------------
-----------------------------------------------------------
-- LA Port Table objects Extension Table
-- ------------------------------------------------------------------
snMspsXLaPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsXLaPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This augment table contains additional objects
for snMspsLaPortTable."
::= { snMspsLa 13 }
snMspsXLaPortEntry OBJECT-TYPE
SYNTAX SnMspsXLaPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains management information applicable to
an interface."
AUGMENTS { snMspsLaPortEntry }
::= { snMspsXLaPortTable 1 }
SnMspsXLaPortEntry ::=
SEQUENCE {
snMspsXLaPortRowStatus
RowStatus
}
snMspsXLaPortRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Row status of this entry which
is used only in two scenarios.
1. CREATE_AND_WAIT
2. DESTROY.
Where '1' will be used during port creation
and '2' will be used during port deletion."
::= { snMspsXLaPortEntry 1 }
-----------------------------------------------------------
-- END OF LA Port Table objects Extension Table
-- ------------------------------------------------------------------
-- snMspsLa 14-20 reserved
snMspsLagSystemLACPLMTimeOut OBJECT-TYPE
SYNTAX INTEGER (75..10000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Timeout in ms for the LACP-LM protocol."
::= { snMspsLa 21 }
snMspsLagSystemLACPLMRetry OBJECT-TYPE
SYNTAX INTEGER (1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Retries for the LACP-LM protocol."
::= { snMspsLa 22 }
snMspsLagSystemFrameDistribution OBJECT-TYPE
SYNTAX INTEGER {
frame-distribution-src-mac(1),
frame-distribution-dst-mac(2),
frame-distribution-src-dst-mac(3),
frame-distribution-src-ip(4),
frame-distribution-dst-ip(5),
frame-distribution-src-dst-ip(6),
frame-distribution-src-dst-mac-hash(7),
frame-distribution-src-dst-mac-xor(8)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select the frame distribution mechanism of the device for link aggregation.
frame-distribution-src-mac(1) frame distribution based on src MAC address
frame-distribution-dst-mac(2) frame distribution based on des MAC address
frame-distribution-src-dst-mac(3) frame distribution based on src and des MAC address
frame-distribution-src-ip(4) frame distribution based on src IP address
frame-distribution-dst-ip(5) frame distribution based on des IP address
frame-distribution-src-dst-ip(6) frame distribution based on src and des IP address
frame-distribution-src-dst-mac-hash(7) frame distribution based on src and dst MAC address hash
frame-distribution-src-dst-mac-xor(8) frame distribution based on src and dst MAC address xor"
::= { snMspsLa 23 }
snMspsDasScalars OBJECT IDENTIFIER ::= { snMspsDas 1 }
snMspsDasObjects OBJECT IDENTIFIER ::= { snMspsDas 2 }
-- --------------------------------------------------------------
-- DaS Scalars
-- --------------------------------------------------------------
snMspsDasNoOfEntries OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the total number of (host, IP) bindings, across
all VLANs, at a given time. This is nothing but the total
number of entries in the IP binding database"
::= { snMspsDasScalars 1 }
-- --------------------------------------------------------------
-- DaS Interface Control Table
-- --------------------------------------------------------------
snMspsDasConfigInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDasConfigInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides objects to enable or disable DaS functionality
on member ports of the tia-interface (or management vlan interface).
When DaS is enabled, DCP multicast packets are transmitted on member ports
and default DaS timer of 10 Seconds will be started. After timer expiry
information received from remote systems are dropped by DaS module.
Note: DCP (Discovery and Configuration Protocol) multicast packets are
not transmitted on mirrored destination and port-channel interfaces.
Example: Management vlan interface 1 has member ports (gi1/1, gi1/2 and gi1/3).
These Ports are connected to different remote systems.
case a) DaS enabled on Vlan 1:
DCP multicast packet, with a vlan tag according to port configurations, will be transmitted
out on each port (gi1/1, gi1/2 and gi1/3) and starts a default timer of
10 Seconds. Remote system information recevies on all these ports for a
duration of 10 Seconds and after timer expiry, packets received on all
these member ports will be dropped.
case b) DaS enabled on port gi1/2:
DCP multicast packet, with a vlan tag according to port configurations, will be transmitted
out on port gi1/2 and starts a default timer of 10 Seconds.
Note: Remote system's information will be recevied on all member ports of
management vlan interface or tia-interface for a duration of 10 Seconds
and after timer expiry, packets received on all these member ports will be
dropped."
::= { snMspsDasObjects 1 }
snMspsDasConfigInterfaceEntry OBJECT-TYPE
SYNTAX SnMspsDasConfigInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table represents an interface on which DaS status (enabled/disabled)
can be set."
INDEX { snMspsDasIfIndex }
::= {snMspsDasConfigInterfaceTable 1}
SnMspsDasConfigInterfaceEntry ::= SEQUENCE {
snMspsDasIfIndex InterfaceIndex,
snMspsDasStatus INTEGER
}
snMspsDasIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Interface index on which remote system infomation is received. This is an index of
the table."
::= { snMspsDasConfigInterfaceEntry 1 }
snMspsDasStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When the object is set to enabled(1), remote system information packets
are consumed on all member ports of management vlan interface or tia-interface
for a default timeout of 10 Seconds only.
When the object is set to disable(2), dcp (Discovery and Configuration
Protocol) packets are dropped by the DaS module."
DEFVAL { disabled }
::= { snMspsDasConfigInterfaceEntry 2 }
-- --------------------------------------------------------------
-- DaS Remote System Table
-- --------------------------------------------------------------
snMspsDasRemoteSystemTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDasRemoteSystemEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains one or more rows per physical network connection known to
this local system. The local system may wish to ensure that only one remote
entry is present for each local port or it may choose to maintain multiple
remote entries for the same local port."
::= { snMspsDasObjects 2 }
snMspsDasRemoteSystemEntry OBJECT-TYPE
SYNTAX SnMspsDasRemoteSystemEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries contain information about a particular physical network connection.
Entries may be created and deleted in this table by the local system."
INDEX { snMspsDasIfIndex, snMspsDasHostMac }
::= { snMspsDasRemoteSystemTable 1 }
SnMspsDasRemoteSystemEntry ::= SEQUENCE {
snMspsDasHostMac MacAddress,
snMspsDasIpAddrType InetAddressType,
snMspsDasIpAddr InetAddress,
snMspsDasIpAddrPfxLen InetAddressPrefixLength,
snMspsDasNextHopAddrType InetAddressType,
snMspsDasNextHopAddr InetAddress,
snMspsDasTypeOfStation SnmpAdminString,
snMspsDasNameOfStation SnmpAdminString,
snMspsDasSignalTimeOut Integer32,
snMspsDasDhcpOrIp INTEGER,
snMspsDasIpStatus INTEGER,
snMspsDasNameStatus INTEGER,
snMspsDasRemoteSystemStatus RowStatus
}
snMspsDasHostMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Mac address of the remote system. This is an index of the table."
::= { snMspsDasRemoteSystemEntry 2 }
snMspsDasIpAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The address type (IPv4/IPv6) to discover or configure from remote system."
::= { snMspsDasRemoteSystemEntry 3 }
snMspsDasIpAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IP address to discover or configure from remote system."
::= { snMspsDasRemoteSystemEntry 4 }
snMspsDasIpAddrPfxLen OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Discovers the subnetmask of the remote IP address of remote system.
This object also can configure the subnetmask of remote system."
::= { snMspsDasRemoteSystemEntry 5 }
snMspsDasNextHopAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The address type (IPv4/IPv6) of IP discovered or configured from remote system."
::= { snMspsDasRemoteSystemEntry 6 }
snMspsDasNextHopAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Discovers the Gateway IP address of remote system. This object also can
configure the Gateway IP address of remote system."
::= { snMspsDasRemoteSystemEntry 7 }
snMspsDasTypeOfStation OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..25))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The string value used to identify the type of station description of given
port associated with the remote system. The length of the string is
restricted to 25."
::= { snMspsDasRemoteSystemEntry 8 }
snMspsDasNameOfStation OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..127))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The string value used to identify discovered remote sytem name information.
This object can configure remote system name. The string length is restricted
to 128 including '\0' character."
::= { snMspsDasRemoteSystemEntry 9 }
snMspsDasSignalTimeOut OBJECT-TYPE
SYNTAX Integer32 (5..60)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The signal time is provided to make the remote system blink for the configured
time interval. The time interval to be configured multiples of 5.
As remote system device blink for approximate 2 to 3 Seconds."
::= { snMspsDasRemoteSystemEntry 10 }
snMspsDasDhcpOrIp OBJECT-TYPE
SYNTAX INTEGER {
none (0),
ip (1),
dhcp (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object provides the remote system IP information, whether IP is
dynamically allocated by DHCP or configured manually.
This option is fetched from the DCP packet."
DEFVAL { none }
::= { snMspsDasRemoteSystemEntry 11 }
snMspsDasIpStatus OBJECT-TYPE
SYNTAX INTEGER {
none (0),
ipDiscovered (1),
ipConfigured (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object provides the information, whether IP is discovered from the
remote system or configured locally."
DEFVAL { none }
::= { snMspsDasRemoteSystemEntry 12 }
snMspsDasNameStatus OBJECT-TYPE
SYNTAX INTEGER {
none (0),
nameDiscovered (1),
nameConfigured (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object provides the information, whether Name is discovered from the
remote system or configured locally."
DEFVAL { none }
::= { snMspsDasRemoteSystemEntry 13 }
snMspsDasRemoteSystemStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The status of the row.
NOT_READY, CREATE_AND_WAIT, CREATE_AND_GO and DESTROY are not allowed.
Before changing the objects make the rowstatus as NOT_IN_SERVICE, fill the
objects and then make rowstatus ACTIVE.
"
::= { snMspsDasRemoteSystemEntry 14 }
-- -------------------------------------------------------------
-- Textual Conventions
-- -------------------------------------------------------------
snMspsEtherNetIPOperStatus OBJECT-TYPE
SYNTAX INTEGER {
on (1),
off (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current Mode of EtherNet/IP"
::= { snMspsEthernetIp 1 }
snMspsEtherNetIPAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
on (1),
off (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Next Mode of EtherNet/IP after the next reboot takes place."
::= { snMspsEthernetIp 2 }
snMspsEtherNetIPEncapsulationInactivityTimeout OBJECT-TYPE
SYNTAX Integer32
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of seconds of inactivity before TCP connection is closed"
DEFVAL { 120 }
::= { snMspsEthernetIp 6 }
snMspsEtherNetIPHostName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Host Name attribute contains the device's host name, which can be used for informational purposes."
::= { snMspsEthernetIp 9}
snMspsEtherNetIPDlrRingport1 OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Index 1"
::= { snMspsEthernetIp 15 }
snMspsEtherNetIPDlrRingport2 OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Index 2"
::= { snMspsEthernetIp 16 }
snMspsEtherNetIPDlrEnable OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object informs whether the entry is active or inactive"
DEFVAL {disable }
::= { snMspsEthernetIp 20 }
snMspsEtherNetIPDlrDscpTagStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object informs whether the entry is active or inactive"
DEFVAL {disable }
::= { snMspsEthernetIp 22 }
snMspsEtherNetIPDlrDscpUrgent OBJECT-TYPE
SYNTAX INTEGER (0..63)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object informs whether the entry is active or inactive"
::= { snMspsEthernetIp 23 }
snMspsEtherNetIPDlrDscpScheduled OBJECT-TYPE
SYNTAX INTEGER (0..63)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object informs whether the entry is active or inactive"
::= { snMspsEthernetIp 25 }
snMspsEtherNetIPDlrDscpHigh OBJECT-TYPE
SYNTAX INTEGER (0..63)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object informs whether the entry is active or inactive"
::= { snMspsEthernetIp 27 }
snMspsEtherNetIPDlrDscpLow OBJECT-TYPE
SYNTAX INTEGER (0..63)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object informs whether the entry is active or inactive"
::= { snMspsEthernetIp 28 }
snMspsEtherNetIPDlrDscpExplicit OBJECT-TYPE
SYNTAX INTEGER (0..63)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object informs whether the entry is active or inactive"
::= { snMspsEthernetIp 30 }
-- ------------------------------------------------------------
-- Textual Conventions
-- ------------------------------------------------------------
InnerVlanIndex ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"A value used to represent the Inner VLAN that might be
carried in a packet.
A value between 1 and 4094 inclusive, represents
a valid vlan and is used only in cases where the
switch understands and is capable of handling
double tagged packets.
A value 0 is used in cases where the switch understands
and is capable of handling only single tagged packets."
SYNTAX Unsigned32 (0..4094)
-- Instance Based Global Configuration Table
snMspsSnoopInstanceGlobalTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsSnoopInstanceGlobalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains multicast forwarding mode configuration
for each instance running in the snooping switch"
::= { snMspsSnooping 1 }
snMspsSnoopInstanceGlobalEntry OBJECT-TYPE
SYNTAX SnMspsSnoopInstanceGlobalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains instance number and the multicast
forwarding mode configuration for the particular instance"
INDEX { snMspsSnoopInstanceGlobalInstId }
::= { snMspsSnoopInstanceGlobalTable 1 }
SnMspsSnoopInstanceGlobalEntry ::= SEQUENCE {
snMspsSnoopInstanceGlobalInstId Integer32,
snMspsSnoopInstanceGlobalMcastFwdMode INTEGER,
snMspsSnoopInstanceGlobalSystemControl INTEGER,
snMspsSnoopInstanceGlobalLeaveConfigLevel INTEGER,
snMspsSnoopInstanceGlobalEnhancedMode INTEGER,
snMspsSnoopInstanceGlobalReportProcessConfigLevel INTEGER,
snMspsSnoopInstanceGlobalSparseMode INTEGER
}
snMspsSnoopInstanceGlobalInstId OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Instance ID pertaining to the global configuration entry."
::= { snMspsSnoopInstanceGlobalEntry 1 }
snMspsSnoopInstanceGlobalMcastFwdMode OBJECT-TYPE
SYNTAX INTEGER { ipbased(1), macbased(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the mode to be used for building the forwarding
table i.e, whether IP based or MAC address based.
The hardware should support programming of S,G and *,G
entries for IGS/MLDS to operate in 'ipbased' mode.
If the hardware supports only MAC based multicast tables
then 'macbased' mode should be chosen."
DEFVAL { 2 }
::= { snMspsSnoopInstanceGlobalEntry 2 }
snMspsSnoopInstanceGlobalSystemControl OBJECT-TYPE
SYNTAX INTEGER { start(1), shutdown(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Snooping module is shutdown or started through this object.
When set to 'start', resources required by the device
SNOOP module is allocated and the module starts running.
When set to 'shutdown', all the resources are released back
to the system and the module stops running."
DEFVAL { 1 }
::= { snMspsSnoopInstanceGlobalEntry 3 }
snMspsSnoopInstanceGlobalLeaveConfigLevel OBJECT-TYPE
SYNTAX INTEGER { vlanbased(1), portbased(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A global configuration to specify if the leave processing
mechanism needs to be configured at the vlan level or at
the port level.
When this object is set to vlanbased, the mib object
snMspsSnoopVlanFastLeave must be used to configure the leave
mechanism.
When this object is set to portbased, the mib object
snMspsSnoopPortLeaveMode must be used to configure the leave
mechanism."
DEFVAL { 1 }
::= { snMspsSnoopInstanceGlobalEntry 4 }
snMspsSnoopInstanceGlobalEnhancedMode OBJECT-TYPE
SYNTAX INTEGER { enable (1), disable (2) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to enable or disable the snooping module
functioning in the enhanced mode.
By default, the snooping module operates in the normal or
default mode. In the default mode, the module multicasts from
an Outer VLAN (SVLAN) to a set of ports. The Inner VLAN (CVLAN)
will typically have a value of zero. In this mode, an S-tagged
multicast data or query packet from one port can result in
multiple packets on separate egress ports, but only one packet
on any one egress port with an S-tag or with no tag.
Enabling this object causes the snooping module to operate in
the enhanced mode. The module multicasts from an Outer VLAN
(SVLAN) to a set of ports & Inner VLANs (CVLAN). In this mode,
an S-tagged multicast data or query packet from one port can
result in multiple copies of the packet on the same egress port,
each with a different C-tag. The Inner VLAN (CVLAN) will
typically have a valid value within the designated range.
However under certain scenarios, the Inner VLAN may also have a
value of zero.
Disabling this object causes the snooping module to operate in
the default mode."
DEFVAL { disable }
::= { snMspsSnoopInstanceGlobalEntry 5}
snMspsSnoopInstanceGlobalReportProcessConfigLevel OBJECT-TYPE
SYNTAX INTEGER { nonrouterports(1), allports(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A global configuration to specify if the report processing
mechanism needs to be configured for the non-router ports or
at the all ports level.
When this object is set to non-router ports, the incoming
report messages are process only on the non-router ports.
When this object is set to all-ports, the incoming
report messages are processed in all ports which includes
router ports also.
By default report messages were not processed on the router
ports(i.e) report process config level is non-router-ports."
DEFVAL { 1 }
::= { snMspsSnoopInstanceGlobalEntry 6 }
snMspsSnoopInstanceGlobalSparseMode OBJECT-TYPE
SYNTAX INTEGER { enable (1), disable (2) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to enable or disable the snooping module
functioning in the sparse mode.
By default, the snooping module operates in the non-sparse
mode. In the non-sparse mode, the module will be used to
forward the unknown multicast traffic when IGS is enabled
in the switch. In the sparse mode (i.e Sparse mode is enabled),
the module will be used to drop the unknown multicast traffic
when IGS is enabled in the switch.
Disabling this object causes the snooping module to operate in
the default mode."
DEFVAL { disable }
::= { snMspsSnoopInstanceGlobalEntry 7 }
snMspsSnoopInstanceConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsSnoopInstanceConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains global configuration of snooping for each
instance running in switch"
::= { snMspsSnooping 2 }
snMspsSnoopInstanceConfigEntry OBJECT-TYPE
SYNTAX SnMspsSnoopInstanceConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains instance number, address type and the list of
global configuration for the particular instance and address type"
INDEX { snMspsSnoopInstanceConfigInstId,
snMspsSnoopInetAddressType }
::= { snMspsSnoopInstanceConfigTable 1 }
SnMspsSnoopInstanceConfigEntry ::= SEQUENCE {
snMspsSnoopInstanceConfigInstId Integer32,
snMspsSnoopInetAddressType InetAddressType,
snMspsSnoopStatus INTEGER,
snMspsSnoopProxyReportingStatus INTEGER,
snMspsSnoopRouterPortPurgeInterval Integer32,
snMspsSnoopPortPurgeInterval Integer32,
snMspsSnoopReportForwardInterval Integer32,
snMspsSnoopRetryCount Integer32,
snMspsSnoopGrpQueryInterval Integer32,
snMspsSnoopReportFwdOnAllPorts INTEGER,
snMspsSnoopTraceOption Integer32,
snMspsSnoopOperStatus INTEGER,
snMspsSnoopSendQueryOnTopoChange INTEGER,
snMspsSnoopSendLeaveOnTopoChange INTEGER,
snMspsSnoopFilterStatus INTEGER,
snMspsSnoopMulticastVlanStatus INTEGER,
snMspsSnoopProxyStatus INTEGER,
snMspsSnoopQueryFwdOnAllPorts INTEGER,
snMspsSnoopQuerierStatus INTEGER,
snMspsSnoopGlobalSnoopStatus INTEGER
}
snMspsSnoopInstanceConfigInstId OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Instance ID pertaining to the global configuration entry."
::= { snMspsSnoopInstanceConfigEntry 1 }
snMspsSnoopInetAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Inet Address Type corresponding to the global configuration entry.
This indicates whether the row is for IGMP/MLD Snooping"
::= { snMspsSnoopInstanceConfigEntry 2 }
snMspsSnoopStatus OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables IGMP/MLD snooping in the system.
When set to 'enabled', the device IGS/MLDS module starts
protocol operations.
When set to 'disabled', the IGS/MLDS module stops performing
protocol operations."
DEFVAL { 2 }
::= { snMspsSnoopInstanceConfigEntry 3 }
snMspsSnoopProxyReportingStatus OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables proxy-reporting in the system.
When proxy-reporting is 'enabled' the switch generates
reports and forwards them to the router based on the
available host information.
When proxy-reporting is 'disabled' the switch forwards
all SSM (IGMPv3/MLDv2) and a single ASM (IGMPv2/MLDv1)
report to the router.
Proxy-reporting can be enabled only if Proxy is disabled. "
DEFVAL { 1 }
::= { snMspsSnoopInstanceConfigEntry 4 }
snMspsSnoopRouterPortPurgeInterval OBJECT-TYPE
SYNTAX Integer32 (60..600)
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"This is the interval (in seconds) after which a learnt
router port entry will be purged. For each router port learnt,
this timer runs for 'RouterPortPurgeInterval' seconds.When the
timer expires, the learnt router port entry is purged. However
if control messages are received from the router before the
timer expiry, then the timer is restarted.
This object is deprecated and corresponding functionality is met
using the objects in snMspsSnoopRtrPortTable. If configured,
this value overrides the value used in snMspsSnoopRtrPortTable."
DEFVAL { 125 }
::= { snMspsSnoopInstanceConfigEntry 5 }
snMspsSnoopPortPurgeInterval OBJECT-TYPE
SYNTAX Integer32 (130..1225)
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"This is the interval (in seconds) after which a learnt
port entry will be purged. For each port on which report
has been received, this timer runs for 'PortPurgeInterval'
seconds. This timer will be restarted whenever a report
message is received from a host on the specific port. If
the timer expires, then , the learnt port entry will
be purged from the multicast group.
This object is deprecated and corresponding functionality is met
using a read only object in snMspsSnoopVlanFilterTable. If configured,
this value overrides the value used in snMspsSnoopVlanFilterTable."
DEFVAL {260}
::= { snMspsSnoopInstanceConfigEntry 6 }
snMspsSnoopReportForwardInterval OBJECT-TYPE
SYNTAX Integer32 (1..25)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This timer is used when both proxy and proxy-reporting is
disabled. The switch then has to suppress multiple
IGMPv2/ MLDv1 report messages for the same group from being
forwarded to the router.
This is the interval (in seconds) within which report
messages for the same multicast group will not be forwarded.
The 'ReportForwardTimer' is per multicast group. This timer is
started as soon as a report message for that group is forwarded
out. Within this 'ReportForwardInterval' if another report for
the same group arrives, that report will not be forwarded."
DEFVAL { 5 }
::= { snMspsSnoopInstanceConfigEntry 7 }
snMspsSnoopRetryCount OBJECT-TYPE
SYNTAX Integer32 (1..5)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"In proxy/proxy-reporting mode, when the switch receives leave
message on a port, it sends group specific query to check if
there are any other interested v2 receivers for the group.
This attribute defines the maximum number of queries sent by
the switch before deleting the port from the group membership
information in the forwarding database. If the maximum retry
count exceeds 'snMspsSnoopRetryCount', then the port will be deleted
from the multicast group membership information in the
forwarding database and received leave message
will be forwarded onto the router ports if there are no
interested receivers for the group."
DEFVAL { 2 }
::= { snMspsSnoopInstanceConfigEntry 8 }
snMspsSnoopGrpQueryInterval OBJECT-TYPE
SYNTAX Integer32 (2..5)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this attribute defines the time period with which
the switch will send group specific queries on a port to check
if there are any intersted receivers. The switch will send
'snMspsSnoopRetryCount' queries before removing the port from the
group membership information in the forwarding database."
DEFVAL { 2 }
::= { snMspsSnoopInstanceConfigEntry 9 }
snMspsSnoopReportFwdOnAllPorts OBJECT-TYPE
SYNTAX INTEGER { allports(1), rtrports(2), nonedgeports(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"In snooping mode, Snooping module will forward reports only
on router ports by default. This object provides administrative
control either to forward the reports on all the member ports of the
VLAN or to forward the report on SpanningTree non edge ports.
This configuration will not be valid in proxy or proxy-reporting
mode"
DEFVAL { 2 }
::= { snMspsSnoopInstanceConfigEntry 10 }
snMspsSnoopTraceOption OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to enable trace statements in
snooping module.
A four byte integer is used for enabling the trace level.
Each bit in the four byte integer represents a particular
trace level.
The mapping between the bit positions & the trace level is
as follows:
0 - Init and Shutdown traces
1 - Management traces
2 - Data Path traces
3 - Control Plane traces
4 - Packet Dump traces
5 - Traces related to all resources except buffers
6 - All Failure traces
7 - Buffer allocation/release traces
The remaining bits are unused. Combination of levels are
also allowed.
For example if the bits 0 and 1 are set, then the trace
statement related to Init-Shutdown and management
will be printed.
The user has to enter the corresponding integer value for the
bits set. For example if bits 0 and 1 are to be set ,then user
has to give the value 3."
::= { snMspsSnoopInstanceConfigEntry 11 }
snMspsSnoopOperStatus OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational status of the IGS/MLDS protocol.
The value enabled(1) indicates the IGS/MLDS module is currently
enabled in the system.
The value disable(1) indicates the IGS/MLDS module is currently
disabled in the system."
::= { snMspsSnoopInstanceConfigEntry 12 }
snMspsSnoopSendQueryOnTopoChange OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Snooping Switch can be configured to send IGMP/MLD General
queries on all non router ports when spanning tree topology
change occurs in a network. If the spanning tree mode is RSTP,
IGMP/MLD general queries will be sent on all the non router ports
present in the switch.If the spanning tree mode is MSTP, IGMP/MLD
general queries will be sent on all the non router ports of the
VLAN mapped for the MSTP instance.When this object is set to
'enabled' ,the switch will generate general query messages. This
object cannot be enabled if snMspsSnoopSendLeaveOnTopoChange is
enabled. "
DEFVAL { 2 }
::= { snMspsSnoopInstanceConfigEntry 13 }
snMspsSnoopSendLeaveOnTopoChange OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Snooping Switch can be configured to issue an IGMP proxy
query solicitation on network ports, i.e. an IGMP Group Leave
with group address 0.0.0.0. This will indicate to the upstream
router that it immediately needs to send Group Specific queries,
which will result in populating the L2 multicast tables in the
snooping switch in order to speed up network convergence. This
object cannot be enabled if snMspsSnoopSendQueryOnTopoChange is
enabled.
This is not applicable for proxy-reporting and proxy."
DEFVAL { 2 }
::= { snMspsSnoopInstanceConfigEntry 14 }
snMspsSnoopFilterStatus OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to enable/disable the IGS filtering feature.
Interface mapping configurations will not be affected by this object
status.
When this object is disabled, filters will not be applied in this
instance but the profile mapping and registration limits can be
configured."
DEFVAL { disabled }
::= { snMspsSnoopInstanceConfigEntry 15 }
snMspsSnoopMulticastVlanStatus OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to enable/disable the Multicast VLAN feature.
When Multicast VLAN feature is enabled, each incoming untagged report
or leave message will be classified to an M-VLAN, depending on
whether any M-VLAN configuration exists for the particular Group
and/or Source address, configured using the
snMspsSnoopVlanMulticastProfileId object.
When Multicast VLAN feature is disabled, the usual VLAN
classification rules apply."
DEFVAL { disabled }
::= { snMspsSnoopInstanceConfigEntry 16 }
snMspsSnoopProxyStatus OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object enables or disables Proxy in the system.
Proxy can be enabled only if Proxy-reporting is disabled.
In proxy mode, the switch act as querier for all
downstream interfaces, act as host for all
upstream interfaces.
In proxy mode, switch sends out general query on all
downstream interfaces on every query interval and updates
membership database based on the reports received.
For upstream interfaces, when queried, proxy trasnmits
current state consolidated report. For any change in
membership databases, state change report is formed and
transmitted on upstream interfaces."
DEFVAL { 2 }
::= { snMspsSnoopInstanceConfigEntry 17 }
snMspsSnoopQueryFwdOnAllPorts OBJECT-TYPE
SYNTAX INTEGER { allports(1), nonrtrports(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"In proxy and proxy reporting mode, Snooping module will send
query messages only to the non-router ports by default.
This object provides administrative control to forward the
query messages on all the member ports of the VLAN."
DEFVAL { 2 }
::= { snMspsSnoopInstanceConfigEntry 18 }
snMspsSnoopQuerierStatus OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The snooping switch can be configured to send IGMP/MLD queries
when IGMP/MLD routers are not present in the snooping VLAN
interfaces. When set to 'enabled' the switch will generate
general query messages on all the snooping vlan interfaces.
The query messages will be suppressed if the switch receives
the query message from any other router in the VLAN. Switch
should be configured as a querier only when there
are no queriers in the network.
This configuration is valid only in proxy reporting mode."
DEFVAL { 2 }
::= { snMspsSnoopInstanceConfigEntry 19 }
snMspsSnoopGlobalSnoopStatus OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables IGMP/MLD snooping in the system.
This mib object controls snMspsSnoopStatus
and snMspsSnoopVlanSnoopStatus. This Mib object is
optional configuration.
When set to 'enabled', the device IGS/MLDS module starts
protocol operations, enables snMspsSnoopStatus and enables
snMspsSnoopVlanSnoopStatus on all the layer 2 vlans.
When set to 'disabled', the IGS/MLDS module snooping status
can be controlled through the MIB objects snMspsSnoopStatus
and snMspsSnoopVlanSnoopStatus.
"
DEFVAL { 2 }
::= { snMspsSnoopInstanceConfigEntry 20 }
-- VLAN based filter table
snMspsSnoopVlanFilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsSnoopVlanFilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains configuration of snooping
on specific Vlans. This Table is valid only when VLAN is
enabled in the system."
::= { snMspsSnooping 3 }
snMspsSnoopVlanFilterEntry OBJECT-TYPE
SYNTAX SnMspsSnoopVlanFilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Contains snooping status , version and fast leave
configuration for a specific VLAN."
INDEX { snMspsSnoopVlanFilterInstId,
snMspsSnoopVlanFilterVlanId,
snMspsSnoopVlanFilterInetAddressType }
::= { snMspsSnoopVlanFilterTable 1 }
SnMspsSnoopVlanFilterEntry ::= SEQUENCE {
snMspsSnoopVlanFilterInstId Integer32,
snMspsSnoopVlanFilterVlanId Integer32,
snMspsSnoopVlanFilterInetAddressType InetAddressType,
snMspsSnoopVlanSnoopStatus INTEGER,
snMspsSnoopVlanOperatingVersion INTEGER,
snMspsSnoopVlanCfgOperVersion INTEGER,
snMspsSnoopVlanFastLeave INTEGER,
snMspsSnoopVlanQuerier INTEGER,
snMspsSnoopVlanCfgQuerier INTEGER,
snMspsSnoopVlanQueryInterval Integer32,
snMspsSnoopVlanRtrPortList PortList,
snMspsSnoopVlanRowStatus RowStatus,
snMspsSnoopVlanStartupQueryCount Integer32,
snMspsSnoopVlanStartupQueryInterval Integer32,
snMspsSnoopVlanOtherQuerierPresentInterval Integer32
}
snMspsSnoopVlanFilterInstId OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Instance ID pertaining to VLAN filter table entry."
::= { snMspsSnoopVlanFilterEntry 1 }
snMspsSnoopVlanFilterVlanId OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" VLAN ID for which snooping configuration is to be done."
::= { snMspsSnoopVlanFilterEntry 2 }
snMspsSnoopVlanFilterInetAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Indicates whether the row belongs to IGS/MLD snooping"
::= { snMspsSnoopVlanFilterEntry 3 }
snMspsSnoopVlanSnoopStatus OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables IGS/MLDS on that specific VLAN"
DEFVAL { 1 }
::= { snMspsSnoopVlanFilterEntry 4 }
snMspsSnoopVlanOperatingVersion OBJECT-TYPE
SYNTAX INTEGER { v1(1), v2(2), v3(3) }
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Indicates the operating version of the IGS/MLDS switch for
a specific VLAN. The default operating mode on a specific VLAN
is IGMP version 3 i.e, V3(3) or MLD version 2 i.e, V2(2).
This object is deprecated. Its functionality is met by
snMspsSnoopRtrPortOperVersion object."
::= { snMspsSnoopVlanFilterEntry 5 }
snMspsSnoopVlanCfgOperVersion OBJECT-TYPE
SYNTAX INTEGER { v1(1), v2(2), v3(3) }
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Indicates the operating version of the IGS/MLDS switch for
a specific VLAN. The default operating mode on a specific VLAN
is IGMP version 3 i.e, V3(3) or MLD version 2 i.e., V2(2).
The 'snMspsSnoopVlanCfgOperVersion' should be configured on the
basis of the router version present in the VLAN.
This configuration should be used only when one router port
is existing in the VLAN.
This object is deprecated and corresponding functionality is met
using snMspsSnoopRtrPortCfgOperVersion object available in
snMspsSnoopRtrPortTable. If configured, consolidated reports sent
on upstream interfaces will use this version."
DEFVAL { 3 }
::= { snMspsSnoopVlanFilterEntry 6 }
snMspsSnoopVlanFastLeave OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables fast leave for the VLAN. When it is
'disabled',on reception of a leave message the switch checks
if they are any interested receivers for the group by sending
a group specific query before removing the port from the
forwarding table. If set to 'enabled', the switch does not
send a group specific query and immediately removes the port
from the forwarding table."
DEFVAL { 2 }
::= { snMspsSnoopVlanFilterEntry 7 }
snMspsSnoopVlanQuerier OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the switch is configured as a querier in the VLAN"
DEFVAL { 2 }
::= { snMspsSnoopVlanFilterEntry 8 }
snMspsSnoopVlanCfgQuerier OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The snooping switch can be configured to send IGMP/MLD queries
when IGMP/MLD routers are not present in the VLAN. When set to
'enabled' the switch will generate general query messages.
The query messages will be suppressed if the switch receives
the query message from any other router in the VLAN. Switch
should be configured as a querier for a VLAN only when there
are no queriers in the network.
This configuration is valid only in proxy reporting mode."
DEFVAL { 2 }
::= { snMspsSnoopVlanFilterEntry 9 }
snMspsSnoopVlanQueryInterval OBJECT-TYPE
SYNTAX Integer32 (60..600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the interval (in seconds) for which the switch
sends general queries in proxy and proxy-reporting mode.
In proxy-reporting mode, General queries will be sent
on all downstream interfaces with this interval only if
the switch is the Querier.
In proxy mode, switch will be querier for all downstream
interfaces. General queries will be sent on all downstream
interfaces with this interval."
DEFVAL { 125 }
::= { snMspsSnoopVlanFilterEntry 10 }
snMspsSnoopVlanRtrPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"List of ports which are configured statically as router ports.
statically. This object may not be sufficient to represent the
full set of interfaces in each switch instance in environments
where the number of interfaces in the system is scaled to a
large value."
::= { snMspsSnoopVlanFilterEntry 11 }
snMspsSnoopVlanRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of a row in the VLAN filter table. Using this
object, new entries can be created in the VLAN filter table
and the existing entries can be removed from the
VLAN filter table"
::= { snMspsSnoopVlanFilterEntry 12 }
snMspsSnoopVlanStartupQueryCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Startup Query Count is the number of Queries sent out on
startup, separated by the Startup Query Interval.
The default value is the Robustness."
DEFVAL { 2 }
::= { snMspsSnoopVlanFilterEntry 13 }
snMspsSnoopVlanStartupQueryInterval OBJECT-TYPE
SYNTAX Integer32 (15..150)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Interval between the general query messages sent by the switch
during startup of querier election process.
This value must be <= (Query Interval/4)"
DEFVAL { 32 }
::= { snMspsSnoopVlanFilterEntry 14 }
snMspsSnoopVlanOtherQuerierPresentInterval OBJECT-TYPE
SYNTAX Integer32 (120..1235)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Other Querier Present Interval is the length of time that
must pass before a multicast router decides that there is no
longer another multicast router which should be the querier.
This value must be >= ((Robustness Variable * Query Interval)
+ (Query Response Interval/2)).
Maximum value for the object varies for IGS and MLDS.
For IGS, the max value supported is 1215.
For MLDS, the max value supported is 1235.
The default value for the object is same for both IGS and MLDS."
DEFVAL { 255 }
::= { snMspsSnoopVlanFilterEntry 15 }
-- The Extention table for VLAN based FilterEntry
snMspsSnoopVlanFilterXTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsSnoopVlanFilterXEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is an extention table of snMspsSnoopVlanFilterTable"
::= { snMspsSnooping 4 }
snMspsSnoopVlanFilterXEntry OBJECT-TYPE
SYNTAX SnMspsSnoopVlanFilterXEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains configurations for specific VLANs"
AUGMENTS { snMspsSnoopVlanFilterEntry }
::= { snMspsSnoopVlanFilterXTable 1 }
SnMspsSnoopVlanFilterXEntry ::= SEQUENCE {
snMspsSnoopVlanBlkRtrPortList PortList,
snMspsSnoopVlanFilterMaxLimitType INTEGER,
snMspsSnoopVlanFilterMaxLimit Unsigned32,
snMspsSnoopVlanFilter8021pPriority Integer32,
snMspsSnoopVlanFilterDropReports INTEGER,
snMspsSnoopVlanMulticastProfileId Unsigned32,
snMspsSnoopVlanPortPurgeInterval Integer32,
snMspsSnoopVlanMaxResponseTime Integer32,
snMspsSnoopVlanRtrLocalPortList PortList,
snMspsSnoopVlanBlkRtrLocalPortList PortList
}
snMspsSnoopVlanBlkRtrPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"List of ports which are configured statically as blocked router
ports statically. This object may not be sufficient to represent
full set of interfaces in each switch instance in environments
where the number of interfaces in the system is scaled to a
large value."
::= { snMspsSnoopVlanFilterXEntry 1 }
snMspsSnoopVlanFilterMaxLimitType OBJECT-TYPE
SYNTAX INTEGER { none(0), groups(1), channels(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the type of limit to be applied on this VLAN.
Setting as 'channels' indicates that the limit is set for
channel (group, source) registrations whereas setting as
'groups' indicates that the limit is set for groups. The
channel limit will be applied only for IGMPv3 Include &
Allow reports whereas the group limit will be applied for
all IGMP reports.
By default, this object has a value of 0 ('none') and no
limiting is done i.e. the value of snMspsSnoopVlanFilterMaxLimit
is ignored when this object is set to 'none'."
DEFVAL { none }
::= { snMspsSnoopVlanFilterXEntry 2 }
snMspsSnoopVlanFilterMaxLimit OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the maximum number of unique entries (channel or group)
that can be learned simultaneously on this VLAN. The
snMspsSnoopVlanFilterMaxLimitType must be set before configuring
this object. If snMspsSnoopVlanFilterMaxLimitType is 'channels',
this limit applies to number of channels that can be joined
on this VLAN. If snMspsSnoopVlanFilterMaxLimitType is 'groups',
this limit applies to number of groups that can be joined on
this VLAN.
By default, this object will hold a value of zero and will
not limit any IGMP packets as long as the value of
snMspsSnoopVlanFilterMaxLimitType is set to 'none'. However, when
snMspsSnoopVlanFilterMaxLimitType is set to 'groups' or 'channels',
if this object has the value of zero, then no IGMP reports will
be processed on this interface.
The maximum value supported by this object is dependent on the
maximum groups or channels registrations that the system can
support."
DEFVAL { 0 }
::= { snMspsSnoopVlanFilterXEntry 3 }
snMspsSnoopVlanFilter8021pPriority OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configures the priority with which the reports assigned to this
VLAN should be processed by the hardware as well as by the
upstream router. Priority 0 means lowest priority while priority
7 means highest priority. This value will be used to update the
priority bits in the ethernet header."
DEFVAL { 7 }
::= { snMspsSnoopVlanFilterXEntry 4 }
snMspsSnoopVlanFilterDropReports OBJECT-TYPE
SYNTAX INTEGER { none(0), igmpv1(1), igmpv2(2), all(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Some implementations might require that IGMPv1 should not be
supported, as IGMPv1 does not have any group leaving mechanism.
Some other implementations might require that both IGMPv1 and
IGMPv2 reports should be dropped, as they do not support SSM.
So in such cases, this object can be used. If set to 'igmpv1',
incoming IGMPv1 Reports will be dropped. If set to 'igmpv2',
both IGMPv1 reports and IGMPv2 reports will be dropped.
In case there is no need to process any reports (for
diagnostic purposes or so), this object can be set to 'all'."
DEFVAL { 0 }
::= { snMspsSnoopVlanFilterXEntry 5 }
snMspsSnoopVlanMulticastProfileId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object contains the multicast profile id configured for a
particular VLAN and is used for multicast vlan classification.
When any untagged report or leave message is received (i.e. packet
with no tag in a Customer Bridge or packet with no S-tag in a
Provider or 802.1ad Bridge), and if the Group & Source address in
the received packet matches any rule in this profile, then the
received packet is classified to be associated to the VLAN (that is,
Multicast VLAN) to which this profile is mapped.
By default, no profile is associated to any VLAN."
DEFVAL { 0 }
::= { snMspsSnoopVlanFilterXEntry 6 }
snMspsSnoopVlanPortPurgeInterval OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the interval (in seconds) after which a learnt
port entry will be purged. For each port on which report
has been received,this timer runs for 'PortPurgeInterval'
seconds. This timer will be restarted whenever a report
message is received from a host on the specific port. If
the timer expires, then , the learnt port entry will
be purged from the multicast group."
::= { snMspsSnoopVlanFilterXEntry 7 }
snMspsSnoopVlanMaxResponseTime OBJECT-TYPE
SYNTAX Integer32 (0..65025)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The maximum response code advertised in queries send over this
vlan.This object is used to configure max response code for
both IGS and MLDS.Minimum value for the object is zero for both
IGS and MLDS. Max value and defualt value for the object varries
for IGS and MLDS.
For IGS, the max value supported is 255. The default value is
100.Its unit is in tenths of a second.
For MLDS, the max value supported is 65025. The default value
is 10000. Its unit is in milliseconds."
::= { snMspsSnoopVlanFilterXEntry 8 }
snMspsSnoopVlanRtrLocalPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"List of ports which are configured statically as router ports.
Each bit in this object represent interfaces denoted by the
object snMspsVcHlPortId associated to the instance identifier
denoted by snMspsSnoopVlanFilterInstId. This object alone
should be referred in environments where the number of
interfaces in the system is scaled to a large value , as the
object snMspsSnoopVlanRtrPortList may not be sufficient to represent
the full set of interfaces in each switch instance."
::= { snMspsSnoopVlanFilterXEntry 9 }
snMspsSnoopVlanBlkRtrLocalPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"List of ports which are configured statically as blocked router
ports. Each bit in this object represent interfaces denoted by
the object snMspsVcHlPortId associated to the instance identifier
denoted by snMspsSnoopVlanFilterInstId. This object alone should be
referred in environments where the number of interfaces in the
system is scaled to a large value, as the object
snMspsSnoopVlanBlkRtrPortList may not be sufficient to represent the
full set of interfaces in each switch instance."
::= { snMspsSnoopVlanFilterXEntry 10 }
-- ----------------------------
-- Snoop Port Config Table
-- ----------------------------
snMspsSnoopPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsSnoopPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains Port-related configurable information.
This table is applicable only when the snooping module is
operating in the default Mode. This table MUST NOT be
configured when the snooping module is operating in the
enhanced mode."
::= { snMspsSnooping 5 }
snMspsSnoopPortEntry OBJECT-TYPE
SYNTAX SnMspsSnoopPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the list of paramter/attribute objects
that can be configured on a port."
INDEX { snMspsSnoopPortIndex,
snMspsSnoopPortInetAddressType }
::= { snMspsSnoopPortTable 1 }
SnMspsSnoopPortEntry ::= SEQUENCE {
snMspsSnoopPortIndex InterfaceIndex,
snMspsSnoopPortInetAddressType InetAddressType,
snMspsSnoopPortLeaveMode INTEGER,
snMspsSnoopPortRateLimit Unsigned32,
snMspsSnoopPortMaxLimitType INTEGER,
snMspsSnoopPortMaxLimit Unsigned32,
snMspsSnoopPortProfileId Unsigned32,
snMspsSnoopPortMemberCnt Unsigned32,
snMspsSnoopPortMaxBandwidthLimit Unsigned32,
snMspsSnoopPortDropReports INTEGER,
snMspsSnoopPortRowStatus RowStatus
}
snMspsSnoopPortIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The interface index of the port."
::= { snMspsSnoopPortEntry 1 }
snMspsSnoopPortInetAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Inet Address Type corresponding to this interface configuration
entry. This indicates whether the row is for IGMP/MLD Snooping"
::= { snMspsSnoopPortEntry 2 }
snMspsSnoopPortLeaveMode OBJECT-TYPE
SYNTAX INTEGER {
explicithosttrack (1),
fastleave (2),
normalleave (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the mechanism to be used for processing the leave messages
in the down stream interface.
When this object is set to 'explicitHostTrack', then the leave
messages are processed using the explicit host tracking
mechanism.
When this object is set to 'fastLeave', the leave messages
are processed by the fast leave mechanism.
When this object is set to 'normalLeave', for every
leave message received, a group or group specific query is sent
on the interface.
This object can be configured only when
snMspsSnoopInstanceGlobalLeaveConfigLevel is set to portbased.
This object is applicable only for processing the igmp v2 leave
messages. For igmpv3 reports, the explicit host tracking
functionality is always performed for tracking the source
registrations and it cannot be disabled (i.e.) configuration
using this object has no effect."
DEFVAL { normalleave }
::= { snMspsSnoopPortEntry 3 }
snMspsSnoopPortRateLimit OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configures the rate-limit for a downstream interface in
units of the number of IGMP packets per second. By default,
this object will hold the maximum value supported by an
unsigned integer and will not rate limit any IGMP packets.
The actual rate supported, however, will depend on what the
system can support. If this object is configured as zero, then
no IGMP packets will be processed on this interface."
DEFVAL { 4294967295 }
::= { snMspsSnoopPortEntry 4 }
snMspsSnoopPortMaxLimitType OBJECT-TYPE
SYNTAX INTEGER { none(0), groups(1), channels(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the type of limit to be applied on this interface.
Setting as 'channels' indicates that the limit is set for
channel (group, source) registrations whereas setting as
'groups' indicates that the limit is set for groups.
The channel limit will be applied only for IGMPv3 Include &
Allow reports whereas the group limit will be applied for
all IGMP reports.
By default, this object has a value of 0 ('none') and no
limiting is done i.e. the value of snMspsSnoopPortMaxLimit
is ignored when this object is set to 'none'."
DEFVAL { none }
::= { snMspsSnoopPortEntry 5 }
snMspsSnoopPortMaxLimit OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configures the maximum number of unique entries (channel or
group) that can be learned simultaneously on this interface.
The snMspsSnoopPortMaxLimitType must be set before configuring
this object. However the Max-limit is configurable even if the
limit type is 'none', but the limit won't be in effect unless
the limit type is set as 'channels' or 'groups'.
If snMspsSnoopPortMaxLimitType is 'channels',
this limit applies to number of channels that can be joined
on this interface. If snMspsSnoopPortMaxLimitType is 'groups',
this limit applies to number of groups that can be joined on
this interface.
By default, this object will hold a value of zero and will
not limit any IGMP packets as long as the value of
snMspsSnoopPortMaxLimitType is set to 'none'. However, when
snMspsSnoopPortMaxLimitType is set to 'groups' or 'channels',
if this object has the value of zero, then no IGMP reports will
be processed on this interface.
The maximum value supported by this object is dependent on the
maximum groups or channels registrations that the system can
support."
DEFVAL { 0 }
::= { snMspsSnoopPortEntry 6 }
snMspsSnoopPortProfileId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The multicast profile index configured for the downstream
interface. This profile contains a set of allowed or denied
rules which are to be applied for the IGMP packets received
through this downstream interface. By default, no profiles
are applied on the interface."
DEFVAL { 0 }
::= { snMspsSnoopPortEntry 7 }
snMspsSnoopPortMemberCnt OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Provides the total number of groups or channels active on the
interface at the given time."
::= { snMspsSnoopPortEntry 8 }
snMspsSnoopPortMaxBandwidthLimit OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the Maximum bandwidth allowed on this port for Multicast.
The snMspsSnoopPortMaxLimitType must be set before configuring
this object. If the snMspsSnoopPortMaxLimitType is 'channels',
this limit applies to the bandwidth of channels going through
the port. It means that both Source as well as Group will be
considered for getting the configured bandwidth of multicast
data. If the snMspsSnoopPortMaxLimitType is 'groups', only
Group address will be considered for getting the configured
bandwidth of multicast data. Whenever a join comes, the
bandwidth corresponding to the joined channel or group, will be
reserved on the port. No new joins will be accepted, if the
reserved bandwidth gets greater that the configured
MaxBandwidth."
::= { snMspsSnoopPortEntry 9 }
snMspsSnoopPortDropReports OBJECT-TYPE
SYNTAX INTEGER { allow(1), drop(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object decides whether to process or drop the
IGMP reports coming on this port."
DEFVAL { 1 }
::= { snMspsSnoopPortEntry 10 }
snMspsSnoopPortRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of a row in the Port Config table. Using this object,
new entries can be created or existing entries can be removed
from the Port Config Table. "
::= { snMspsSnoopPortEntry 11 }
-- ------------------------------------------------------------------
-- Snoop Enhanced Port Config Table
-- ------------------------------------------------------------------
snMspsSnoopEnhPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsSnoopEnhPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains Port-related configurable information.
This table is applicable only when the snooping module is
operating in the enhanced Mode. This table MUST NOT be
configured when the snooping module is operating in the
default mode."
::= { snMspsSnooping 6 }
snMspsSnoopEnhPortEntry OBJECT-TYPE
SYNTAX SnMspsSnoopEnhPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the list of paramter/attribute objects that
can be configured on an interface."
INDEX {
snMspsSnoopEnhPortIndex,
snMspsSnoopEnhPortInnerVlanId,
snMspsSnoopEnhPortInetAddressType
}
::= { snMspsSnoopEnhPortTable 1 }
SnMspsSnoopEnhPortEntry ::= SEQUENCE {
snMspsSnoopEnhPortIndex InterfaceIndex,
snMspsSnoopEnhPortInnerVlanId InnerVlanIndex,
snMspsSnoopEnhPortInetAddressType InetAddressType,
snMspsSnoopEnhPortLeaveMode INTEGER,
snMspsSnoopEnhPortRateLimit Unsigned32,
snMspsSnoopEnhPortMaxLimitType INTEGER,
snMspsSnoopEnhPortMaxLimit Unsigned32,
snMspsSnoopEnhPortProfileId Unsigned32,
snMspsSnoopEnhPortMemberCnt Unsigned32,
snMspsSnoopEnhPortMaxBandwidthLimit Unsigned32,
snMspsSnoopEnhPortDropReports INTEGER,
snMspsSnoopEnhPortRowStatus RowStatus
}
snMspsSnoopEnhPortIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The interface index of the port."
::= { snMspsSnoopEnhPortEntry 1 }
snMspsSnoopEnhPortInnerVlanId OBJECT-TYPE
SYNTAX InnerVlanIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Inner VLAN Identifier."
::= { snMspsSnoopEnhPortEntry 2 }
snMspsSnoopEnhPortInetAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Inet Address Type corresponding to this interface configuration
entry. This indicates whether the row is for IGMP/MLD Snooping"
::= { snMspsSnoopEnhPortEntry 3 }
snMspsSnoopEnhPortLeaveMode OBJECT-TYPE
SYNTAX INTEGER {
explicithosttrack (1),
fastleave (2),
normalleave (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the mechanism to be used for processing the leave messages
in the down stream interface.
When this object is set to 'explicitHostTrack', then the leave
messages are processed using the explicit host tracking
mechanism.
When this object is set to 'fastLeave', the leave messages
are processed by the fast leave mechanism.
When this object is set to 'normalLeave', for every
leave message received, a group or group specific query is sent
on the interface.
This object can be configured only when
snMspsSnoopInstanceGlobalLeaveConfigLevel is set to portbased.
This object is applicable only for processing the igmp v2 leave
messages. For igmpv3 reports, the explicit host tracking
functionality is always performed for tracking the source
registrations and it cannot be disabled.
For the v3 INCLUDE NONE reports the leave handling behavior is
similar to the v2 leave messages for the leave modes
'explicitHostTrack' and 'fastLeave'. For the leave mode
'normalLeave' query message is not sent on the interface
and only the host registered for the multicast group is removed" DEFVAL { normalleave }
::= { snMspsSnoopEnhPortEntry 4 }
snMspsSnoopEnhPortRateLimit OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configures the rate-limit for a downstream interface in
units of the number of IGMP packets per second. By default,
this object will hold the maximum value supported by an
unsigned integer and will not rate limit any IGMP packets.
The actual rate supported, however, will depend on what the
system can support. If this object is configured as zero, then
no IGMP packets will be processed on this interface."
DEFVAL { 4294967295 }
::= { snMspsSnoopEnhPortEntry 5 }
snMspsSnoopEnhPortMaxLimitType OBJECT-TYPE
SYNTAX INTEGER { none(0), groups(1), channels(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the type of limit to be applied on this interface.
Setting as 'channels' indicates that the limit is set for
channel (group, source) registrations whereas setting as
'groups' indicates that the limit is set for groups.
The channel limit will be applied only for IGMPv3 Include &
Allow reports whereas the group limit will be applied for
all IGMP reports.
By default, this object has a value of 0 ('none') and no
limiting is done i.e. the value of snMspsSnoopEnhPortMaxLimit
is ignored when this object is set to 'none'."
DEFVAL { none }
::= { snMspsSnoopEnhPortEntry 6 }
snMspsSnoopEnhPortMaxLimit OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configures the maximum number of unique entries (channel or
group) that can be learned simultaneously on this interface.
The snMspsSnoopEnhPortMaxLimitType must be set before configuring
this object. However the Max-limit is configurable even if the
limit type is 'none', but the limit won't be in effect unless
the limit type is set as 'channels' or 'groups'.
If snMspsSnoopEnhPortMaxLimitType is 'channels',
this limit applies to number of channels that can be joined
on this interface. If snMspsSnoopEnhPortMaxLimitType is 'groups',
this limit applies to number of groups that can be joined on
this interface.
By default, this object will hold a value of zero and will
not limit any IGMP packets as long as the value of
snMspsSnoopEnhPortMaxLimitType is set to 'none'. However, when
snMspsSnoopEnhPortMaxLimitType is set to 'groups' or 'channels',
if this object has the value of zero, then no IGMP reports will
be processed on this interface.
The maximum value supported by this object is dependent on the
maximum groups or channels registrations that the system can
support."
DEFVAL { 0 }
::= { snMspsSnoopEnhPortEntry 7 }
snMspsSnoopEnhPortProfileId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The multicast profile index configured for the downstream
interface. This profile contains a set of allowed or denied
rules which are to be applied for the IGMP packets received
through this downstream interface. By default, no profiles
are applied on the interface."
DEFVAL { 0 }
::= { snMspsSnoopEnhPortEntry 8 }
snMspsSnoopEnhPortMemberCnt OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Provides the total number of groups or channels active on the
interface at the given time."
::= { snMspsSnoopEnhPortEntry 9 }
snMspsSnoopEnhPortMaxBandwidthLimit OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the Maximum bandwidth allowed on this port for Multicast.
The snMspsSnoopEnhPortMaxLimitType must be set before configuring
this object. If the snMspsSnoopEnhPortMaxLimitType is 'channels',
this limit applies to the bandwidth of channels going through
the port. It means that both Source as well as Group will be
considered for getting the configured bandwidth of multicast
data. If the snMspsSnoopEnhPortMaxLimitType is 'groups', only
Group address will be considered for getting the configured
bandwidth of multicast data. Whenever a join comes, the
bandwidth corresponding to the joined channel or group, will be
reserved on the port. No new joins will be accepted, if the
reserved bandwidth gets greater that the configured
MaxBandwidth."
::= { snMspsSnoopEnhPortEntry 10 }
snMspsSnoopEnhPortDropReports OBJECT-TYPE
SYNTAX INTEGER { allow(1), drop(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object decides whether to process or drop the
IGMP reports coming on this port."
DEFVAL { 1 }
::= { snMspsSnoopEnhPortEntry 11 }
snMspsSnoopEnhPortRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of a row in the Port Config table. Using this object,
new entries can be created or existing entries can be removed
from the Port Config Table. "
::= { snMspsSnoopEnhPortEntry 12 }
-- ------------------------------------------------------------------
-- Snoop Proxy Upstream Router Port Table
-- ------------------------------------------------------------------
snMspsSnoopRtrPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsSnoopRtrPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains upstream Router Port-related
configurable information. Router port entry in this table
will be created when the router port is either learnt
dynamically or when the router port is statically
configured through 'snMspsSnoopVlanRtrPortList'.Only static
router ports will be restored during save restore."
::= { snMspsSnooping 7 }
snMspsSnoopRtrPortEntry OBJECT-TYPE
SYNTAX SnMspsSnoopRtrPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the upstream router port operating
and configured version of IGMP."
INDEX {
snMspsSnoopRtrPortIndex,
snMspsSnoopRtrPortVlanId,
snMspsSnoopRtrPortInetAddressType
}
::= { snMspsSnoopRtrPortTable 1 }
SnMspsSnoopRtrPortEntry ::= SEQUENCE {
snMspsSnoopRtrPortIndex InterfaceIndex,
snMspsSnoopRtrPortVlanId VlanIndex,
snMspsSnoopRtrPortInetAddressType InetAddressType,
snMspsSnoopRtrPortOperVersion INTEGER,
snMspsSnoopRtrPortCfgOperVersion INTEGER,
snMspsSnoopOlderQuerierInterval Integer32,
snMspsSnoopV3QuerierInterval Integer32
}
snMspsSnoopRtrPortIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The interface index of the port which is defined
as an upstream router port."
::= { snMspsSnoopRtrPortEntry 1 }
snMspsSnoopRtrPortVlanId OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VLAN Identifier for the upstream router port"
::= { snMspsSnoopRtrPortEntry 2 }
snMspsSnoopRtrPortInetAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Inet Address Type corresponding to the global configuration
entry. This indicates whether the row is for IGMP/MLD Snooping"
::= { snMspsSnoopRtrPortEntry 3 }
snMspsSnoopRtrPortOperVersion OBJECT-TYPE
SYNTAX INTEGER { v1(1), v2(2), v3(3) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the operating version of the IGMP Proxy
on the upstream router port. Operating version is used by the
Proxy to send consolidated reports on the router ports.
Operating version of the router port will change based on the
the version of query messages received on that port.
Otherwise it will be set to the configured version of IGMP on the
router port.
The default operating mode is IGMP version 3
i.e, V3(3) or MLD version 2 i.e, V2(2)."
DEFVAL { 3 }
::= { snMspsSnoopRtrPortEntry 4 }
snMspsSnoopRtrPortCfgOperVersion OBJECT-TYPE
SYNTAX INTEGER { v1(1), v2(2), v3(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the configured version of the IGMP Proxy
on the upstream router port.The default operating mode is
IGMP version 3 i.e, V3(3) or MLD version 2 i.e, V2(2). The
'snMspsSnoopRtrPortCfgOperVersion' should be configured on the
basis of the router version present in the router port.The
value configured for static router alone will be stored
and restored."
DEFVAL { 3 }
::= { snMspsSnoopRtrPortEntry 5 }
snMspsSnoopOlderQuerierInterval OBJECT-TYPE
SYNTAX Integer32 (60..600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The time interval after which proxy assumes that there are no
v1/v2 routers present on the upstream port.While OlderQuerierTimer is
running, proxy will reply to all queries with consolidated
v1/v2 (oper version) reports.
On time-out, if v2/v3 queriers are not present and if the port
is a dynamically learnt port, then it will be purged.
Else, proxy will reply to all the queries with consolidated
reports with the new oper version (v2/v3).The
value configured for static router alone will be stored
and restored."
DEFVAL { 125 }
::= { snMspsSnoopRtrPortEntry 6 }
snMspsSnoopV3QuerierInterval OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time interval after which proxy assumes that there are no
IGMPv3 routers present on the upstream port.While V3QuerierTimer is
running, proxy will reply to all queries with consolidated
v1/v2/v3 (oper version) reports.
On time-out, if v1/v2 queriers are not present and if the port
is a dynamically learnt upstream port, then the port will be purged.
Else, proxy will reply to all the queries with consolidated
reports with the new oper version (v1/v2). "
::= { snMspsSnoopRtrPortEntry 7 }
-- IGMP Snooping Switch IP Address
snMspsSnoopSwitchIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This will be used as source IP address for IGMP Snooping packets
Default value for this object is 10.0.0.1. Configuring of IP Address 0.0.0.0
is not allowed. Configuration of SwitchIP Address will result in
restarting of snooping instances"
::= { snMspsSnooping 8 }
---------------------------------------------------
-- VLAN Based Static Multicast Forwarding Table
---------------------------------------------------
snMspsSnoopVlanStaticMcastGrpTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsSnoopVlanStaticMcastGrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains IP based multicast forwarding
information."
::= { snMspsSnooping 9 }
snMspsSnoopVlanStaticMcastGrpEntry OBJECT-TYPE
SYNTAX SnMspsSnoopVlanStaticMcastGrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains VLAN ID, unicast source address ,
multicast group address and the list of ports onto which the
multicast data packets for group should be forwarded."
INDEX { snMspsSnoopVlanStaticMcastGrpInstId,
snMspsSnoopVlanStaticMcastGrpVlanId,
snMspsSnoopVlanStaticMcastGrpAddressType,
snMspsSnoopVlanStaticMcastGrpSourceAddress,
snMspsSnoopVlanStaticMcastGrpGroupAddress }
::= { snMspsSnoopVlanStaticMcastGrpTable 1 }
SnMspsSnoopVlanStaticMcastGrpEntry ::= SEQUENCE {
snMspsSnoopVlanStaticMcastGrpInstId Integer32,
snMspsSnoopVlanStaticMcastGrpVlanId Integer32,
snMspsSnoopVlanStaticMcastGrpAddressType InetAddressType,
snMspsSnoopVlanStaticMcastGrpSourceAddress InetAddress,
snMspsSnoopVlanStaticMcastGrpGroupAddress InetAddress,
snMspsSnoopVlanStaticMcastGrpPortList PortList,
snMspsSnoopVlanStaticMcastGrpRowStatus RowStatus
}
snMspsSnoopVlanStaticMcastGrpInstId OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Instance ID pertaining to the Multicast forwarding entry.
Currently only one instance is supported so it is always 1"
::= { snMspsSnoopVlanStaticMcastGrpEntry 1 }
snMspsSnoopVlanStaticMcastGrpVlanId OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"VLAN ID pertaining to the Multicast forwarding entry"
::= { snMspsSnoopVlanStaticMcastGrpEntry 2 }
snMspsSnoopVlanStaticMcastGrpAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"InetAddressType pertaining to the Multicast forwarding entry"
::= { snMspsSnoopVlanStaticMcastGrpEntry 3 }
snMspsSnoopVlanStaticMcastGrpSourceAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Unicast source address of the data source that sends
multicast data for this group"
::= { snMspsSnoopVlanStaticMcastGrpEntry 4 }
snMspsSnoopVlanStaticMcastGrpGroupAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IP/IPv6 multicast group address"
::= { snMspsSnoopVlanStaticMcastGrpEntry 5 }
snMspsSnoopVlanStaticMcastGrpPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"List of ports onto which the multicast data
packets destined for this source and group will be forwarded."
::= { snMspsSnoopVlanStaticMcastGrpEntry 6 }
snMspsSnoopVlanStaticMcastGrpRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The row status variable, used according to
row installation and removal conventions."
::= { snMspsSnoopVlanStaticMcastGrpEntry 7 }
-- snMspsRmon 1-2 reserved
snMspsRmonEnableStatus OBJECT-TYPE
SYNTAX INTEGER { rmonenabled(1), rmondisabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object defines the rmonenable flag for rmon"
::= { snMspsRmon 3 }
snMspsRmonHwStatsSupp OBJECT-TYPE
SYNTAX INTEGER { notsupported(0), supported(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object defines the flag for whether HW supports
Etherstatistics or not "
::= { snMspsRmon 4 }
snMspsRmonHwHistorySupp OBJECT-TYPE
SYNTAX INTEGER { notsupported(0), supported(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object defines the enabled HWhistorysupp flag for rmon"
::= { snMspsRmon 5 }
snMspsRmonHwAlarmSupp OBJECT-TYPE
SYNTAX INTEGER { notsupported(0), supported(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object defines the enabled HWAlarmsupp flag for rmon"
::= { snMspsRmon 6 }
-- snMspsRmon 7-9 reserved
snMspsRmonHwEventSupp OBJECT-TYPE
SYNTAX INTEGER { notsupported(0), supported(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object defines the enabled HWEvent flag for rmon"
::= { snMspsRmon 10 }
snMspsRmon2AdminStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object defines the admin status for rmon2."
DEFVAL { disabled }
::= { snMspsRmon 11 }
snMspsDsmonAdminStatus OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object defines the admin status for dsmon"
DEFVAL { 2 }
::= { snMspsRmon 12 }
-- --------------------------------------------------------------
-- snMspsQosPortPrio
-- --------------------------------------------------------------
snMspsCosPortPrioRemapEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enables/Disables Cos priority port remapping "
DEFVAL {disabled}
::= { snMspsQosCosPort 1 }
snMspsCosPortPrioRemapTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsCosPortPrioRemapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table containing prio of cos of each port"
::= { snMspsQosCosPort 2 }
snMspsCosPortPrioRemapEntry OBJECT-TYPE
SYNTAX SnMspsCosPortPrioRemapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Interface entry containing objects at the subnetwork layer and below for a particular interface."
INDEX { snMspsCosPortIndex }
::= { snMspsCosPortPrioRemapTable 1 }
SnMspsCosPortPrioRemapEntry ::= SEQUENCE {
snMspsCosPortIndex INTEGER,
snMspsCosPortPrio0Remap INTEGER,
snMspsCosPortPrio1Remap INTEGER,
snMspsCosPortPrio2Remap INTEGER,
snMspsCosPortPrio3Remap INTEGER,
snMspsCosPortPrio4Remap INTEGER,
snMspsCosPortPrio5Remap INTEGER,
snMspsCosPortPrio6Remap INTEGER,
snMspsCosPortPrio7Remap INTEGER
}
snMspsCosPortIndex OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Indicates the port index."
::= { snMspsCosPortPrioRemapEntry 1 }
snMspsCosPortPrio0Remap OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Indicates the forced prio of each frame on this port with incoming prio 0."
DEFVAL {0}
::= { snMspsCosPortPrioRemapEntry 2 }
snMspsCosPortPrio1Remap OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Indicates the forced prio of each frame on this port with incoming prio 1."
DEFVAL {1}
::= { snMspsCosPortPrioRemapEntry 3 }
snMspsCosPortPrio2Remap OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Indicates the forced prio of each frame on this port with incoming prio 2."
DEFVAL {2}
::= { snMspsCosPortPrioRemapEntry 4 }
snMspsCosPortPrio3Remap OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Indicates the forced prio of each frame on this port with incoming prio 3."
DEFVAL {3}
::= { snMspsCosPortPrioRemapEntry 5 }
snMspsCosPortPrio4Remap OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Indicates the forced prio of each frame on this port with incoming prio 4."
DEFVAL {4}
::= { snMspsCosPortPrioRemapEntry 6 }
snMspsCosPortPrio5Remap OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Indicates the forced prio of each frame on this port with incoming prio 5."
DEFVAL {5}
::= { snMspsCosPortPrioRemapEntry 7 }
snMspsCosPortPrio6Remap OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Indicates the forced prio of each frame on this port with incoming prio 6."
DEFVAL {6}
::= { snMspsCosPortPrioRemapEntry 8 }
snMspsCosPortPrio7Remap OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Indicates the forced prio of each frame on this port with incoming prio 7."
DEFVAL {7}
::= { snMspsCosPortPrioRemapEntry 9 }
-- --------------------------------------------------------------
-- snMspsQosAgentMacPriority
-- --------------------------------------------------------------
snMspsAgentMacPriority OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority that is forced for all frames from/towards agent MAC address"
DEFVAL {4}
::= { snMspsQosAgentMac 1 }
-- --------------------------------------------------------------
-- snMspsQosBcastPriority
-- --------------------------------------------------------------
snMspsBcastPriority OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Broadcast priority that is forced for all broad cast frames in case forcing is enabled"
DEFVAL {0}
::= { snMspsQosBcast 1 }
-- --------------------------------------------------------------
-- snMspsQosSchedulingMode
-- --------------------------------------------------------------
snMspsSchedulingMode OBJECT-TYPE
SYNTAX INTEGER {
weightedfair(1),
strict(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specifies the switch scheduling mechanism"
DEFVAL {strict}
::= { snMspsQosSchedule 1 }
snMspsLoopDSystem OBJECT IDENTIFIER ::= { snMspsLoopDetection 1 }
snMspsLoopDPort OBJECT IDENTIFIER ::= { snMspsLoopDetection 2 }
-- --------------------------------------------------------------
-- LoopDSystem Sub-Group
-- --------------------------------------------------------------
snMspsLoopDGlobalEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Global enable/disable for the loop detection protocol."
DEFVAL { disabled }
::= { snMspsLoopDSystem 1 }
snMspsLoopDVlanEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Flag to indicate whether the loop detection frames are sent
untagged only or on all VLANs the ports are members of."
DEFVAL { disabled }
::= { snMspsLoopDSystem 2 }
-- --------------------------------------------------------------
-- LoopDPortConfig Sub-Group
-- --------------------------------------------------------------
snMspsLoopDPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsLoopDPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of ports for which simple loop detection occurs on."
::= { snMspsLoopDPort 3 }
snMspsLoopDPortEntry OBJECT-TYPE
SYNTAX SnMspsLoopDPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Loop detection port entry."
INDEX { snMspsLoopDPortIfIndex }
::= { snMspsLoopDPortTable 1 }
SnMspsLoopDPortEntry ::= SEQUENCE {
snMspsLoopDPortIfIndex INTEGER,
snMspsLoopDPortEnable INTEGER,
snMspsLoopDTransmissionInterval INTEGER,
snMspsLoopDPortDetectThreshold INTEGER,
snMspsLoopDPortReactionTimeout INTEGER,
snMspsLoopDPortReactionLocal INTEGER,
snMspsLoopDPortReactionRemote INTEGER,
snMspsLoopDPortReset INTEGER,
snMspsLoopDPortState INTEGER,
snMspsLoopDPortIncomingPortIndex INTEGER,
snMspsLoopDPortIncomingVlanId INTEGER
}
snMspsLoopDPortIfIndex OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Port on which loop detection occurs on."
::= { snMspsLoopDPortEntry 1 }
snMspsLoopDPortEnable OBJECT-TYPE
SYNTAX INTEGER {
loopdPortBlocked(1),
loopdPortForwarder(2),
loopdPortSender(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Value indicate whether the port entry is disabled (blocked) for
loop detection, is enabled for forwarding only (sender) or is
enabled for both sending and forwarding (forwarder)."
DEFVAL { loopdPortForwarder }
::= { snMspsLoopDPortEntry 2 }
snMspsLoopDTransmissionInterval OBJECT-TYPE
SYNTAX INTEGER (500..5000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The interval (in Milliseconds) for which loop detection
occurs on a certain port or VLAN."
DEFVAL { 1000 }
::= { snMspsLoopDPortEntry 3 }
snMspsLoopDPortDetectThreshold OBJECT-TYPE
SYNTAX INTEGER (1..500)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Once the number of loop detection packets received on
this port reaches this threshold action will be taken."
DEFVAL { 2 }
::= { snMspsLoopDPortEntry 4 }
snMspsLoopDPortReactionTimeout OBJECT-TYPE
SYNTAX INTEGER (0..86400)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The timeout (in seconds) the port action will be rolled
back after a loop has been detected.
If timeout is 0 the port action will not be rolled back."
DEFVAL { 0 }
::= { snMspsLoopDPortEntry 5 }
snMspsLoopDPortReactionLocal OBJECT-TYPE
SYNTAX INTEGER {
loopdNoAction(1),
loopdPortDisable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The action that will take place after a local loop has
been detected."
DEFVAL { loopdPortDisable }
::= { snMspsLoopDPortEntry 6 }
snMspsLoopDPortReactionRemote OBJECT-TYPE
SYNTAX INTEGER {
loopdNoAction(1),
loopdPortDisable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The action that will take place after a remote loop has
been detected."
DEFVAL { loopdPortDisable }
::= { snMspsLoopDPortEntry 7 }
snMspsLoopDPortReset OBJECT-TYPE
SYNTAX INTEGER {
loopdPortNoAction(1),
loopdPortReset(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "If a port has been disabled due to a detected loop, the
port can be reenabled"
DEFVAL { loopdPortNoAction }
::= { snMspsLoopDPortEntry 8 }
snMspsLoopDPortState OBJECT-TYPE
SYNTAX INTEGER {
loopdDisabled(1),
loopdActive(2),
loopdDetectedLocalLoop(3),
loopdDetectedRemoteLoop(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Actual loop detection state of the port"
DEFVAL { loopdDisabled }
::= { snMspsLoopDPortEntry 9 }
snMspsLoopDPortIncomingPortIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Port ID of the port packet the last action causing packet
was received."
::= { snMspsLoopDPortEntry 10 }
snMspsLoopDPortIncomingVlanId OBJECT-TYPE
SYNTAX INTEGER(1..4096)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "VLAN ID the last action causing packet was received."
::= { snMspsLoopDPortEntry 11 }
-- --------------------------------------------------------------
-- END of LoopDPortConfig Sub-Group
-- --------------------------------------------------------------
-- -------------------------------------------------------------
-- SNMPv2 Notifications
-- -------------------------------------------------------------
snMspsTrapLOOPDStateChange NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"Device changed LOOPD state."
::= { snMspsTrapPrefix 2251 }
-- -------------------------------------------------------------
-- END OF SNMPv2 Notifications
-- -------------------------------------------------------------
-- PSE Objects
snMspsPoePsePortTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsPoePsePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A private extension of standard pethPsePortTable."
::= { snMspsPoe 1 }
snMspsPoePsePortEntry OBJECT-TYPE
SYNTAX SnMspsPoePsePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A set of objects that display the power
characteristics of a power Ethernet PSE port."
AUGMENTS { pethPsePortEntry }
::= { snMspsPoePsePortTable 1 }
SnMspsPoePsePortEntry ::= SEQUENCE {
snMspsPoePsePortPower
Gauge32,
snMspsPoePsePortVoltage
Gauge32,
snMspsPoePsePortCurrent
Gauge32,
snMspsPoePsePortMaximumPower
INTEGER,
snMspsPoePsePortMaximumPowerUsed
TruthValue,
snMspsPoePsePortMaximumUserPowerLimit
INTEGER,
snMspsPoePsePortPowerClassificationsPrimary
INTEGER,
snMspsPoePsePortPowerClassificationsSecondary
INTEGER,
snMspsPoePsePortDualSignaturePD
TruthValue
}
snMspsPoePsePortPower OBJECT-TYPE
SYNTAX Gauge32 (1..65535)
UNITS "Milliwatts"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Measured power usage of ports expressed in Milliwatts."
::= { snMspsPoePsePortEntry 15 }
snMspsPoePsePortVoltage OBJECT-TYPE
SYNTAX Gauge32 (1..65535)
UNITS "Volts"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Measured voltage usage of ports expressed in Volts."
::= { snMspsPoePsePortEntry 16 }
snMspsPoePsePortCurrent OBJECT-TYPE
SYNTAX Gauge32 (1..65535)
UNITS "Milliamps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Measured current usage of ports expressed in Milliamps."
::= { snMspsPoePsePortEntry 17 }
snMspsPoePsePortMaximumPower OBJECT-TYPE
SYNTAX INTEGER (0..30)
UNITS "W"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum power that can be assigned to devices connected to this port in Watts"
DEFVAL { 0 }
::= { snMspsPoePsePortEntry 18 }
snMspsPoePsePortMaximumPowerUsed OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Determines if snMspsPoePsePortMaximumPower is used to limit the power delivered to the device connected to this port"
DEFVAL { false }
::= { snMspsPoePsePortEntry 19 }
snMspsPoePsePortMaximumUserPowerLimit OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum user power limit"
::= { snMspsPoePsePortEntry 24 }
snMspsPoePsePortPowerClassificationsPrimary OBJECT-TYPE
SYNTAX INTEGER {
class0(1),
class1(2),
class2(3),
class3(4),
class4(5),
class5(6),
class6(7),
class7(8),
class8(9),
class9(10),
unknown(100)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Classification is a way to tag different terminals on the
Power over LAN network according to their power consumption.
This variable is valid only while a PD is being powered,
that is, while the attribute pethPsePortDetectionStatus
is reporting the enumeration deliveringPower."
REFERENCE
"IEEE Std 802.3af Section 30.9.1.1.6
aPSEPowerClassification"
::= { snMspsPoePsePortEntry 30 }
snMspsPoePsePortPowerClassificationsSecondary OBJECT-TYPE
SYNTAX INTEGER {
class0(1),
class1(2),
class2(3),
class3(4),
class4(5),
class5(6),
class6(7),
class7(8),
class8(9),
class9(10),
unknown(100)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Classification is a way to tag different terminals on the
Power over LAN network according to their power consumption.
This variable is valid only while a PD is being powered,
that is, while the attribute pethPsePortDetectionStatus
is reporting the enumeration deliveringPower."
REFERENCE
"IEEE Std 802.3af Section 30.9.1.1.6
aPSEPowerClassification"
::= { snMspsPoePsePortEntry 35 }
snMspsPoePsePortDualSignaturePD OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"true (1) A dual signature PD is connected to the port
false(2) no dual signature PD is connected to the port"
::= { snMspsPoePsePortEntry 40 }
-- Main PSE Objects
snMspsPoeMainPseTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsPoeMainPseEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A private extension of standard pethMainPseTable."
::= { snMspsPoe 3 }
snMspsPoeMainPseEntry OBJECT-TYPE
SYNTAX SnMspsPoeMainPseEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A set of objects that display the power characteristics of a PSE. "
AUGMENTS { pethMainPseEntry }
::= { snMspsPoeMainPseTable 1 }
SnMspsPoeMainPseEntry ::= SEQUENCE {
snMspsPoeMainPseAllocatedPower Gauge32,
snMspsPoeMainPseMaximumPower INTEGER,
snMspsPoeMainPseDescription DisplayString
}
snMspsPoeMainPseAllocatedPower OBJECT-TYPE
SYNTAX Gauge32 (1..65535)
UNITS "Watts"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"There is a certain power that needs to be allocated (reserved)
for each PSE basing on pethPsePortPowerClassifications
(like for Class 0,3 needs 15,4 Watts) of PD(Powered Devices)
connected to it"
::= { snMspsPoeMainPseEntry 6 }
snMspsPoeMainPseMaximumPower OBJECT-TYPE
SYNTAX INTEGER (1..65535)
UNITS "Watts"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum power that can be assigned to devices connected to a PSE"
::= { snMspsPoeMainPseEntry 8 }
snMspsPoeMainPseDescription OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description of a PSE"
::= { snMspsPoeMainPseEntry 10 }
-- -------------------------------------------------------------
-- SNMPv2 Notifications
-- -------------------------------------------------------------
snMspsTrapPoeStateChange NOTIFICATION-TYPE
STATUS current
DESCRIPTION "Poe state change notification."
::= { snMspsTrapPrefix 3051 }
snMspsCableTesterVCT OBJECT IDENTIFIER ::= { snMspsCableTester 1 }
snMspsCableTesterVCTTDR OBJECT IDENTIFIER ::= { snMspsCableTesterVCT 1 }
-- --------------------------------------------------------------
-- VCTControlTable Sub-Group
-- --------------------------------------------------------------
snMspsCableTesterVCTTDRControlTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsCableTesterVCTTDRControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table containing per-port objects for virtual cable test feature
uses Time Domain Reflectometry to determine the quality of cables,
connectors, and terminations. Test can not be performed on fiber
based interfaces. Test causes a link down!"
::= { snMspsCableTesterVCTTDR 10 }
snMspsCableTesterVCTTDRControlEntry OBJECT-TYPE
SYNTAX SnMspsCableTesterVCTTDRControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Interface entry containing objects for a particular
interface."
INDEX { snMspsCableTesterVCTTDRControlPortIndex }
::= { snMspsCableTesterVCTTDRControlTable 1 }
SnMspsCableTesterVCTTDRControlEntry ::= SEQUENCE {
snMspsCableTesterVCTTDRControlPortIndex INTEGER,
snMspsCableTesterVCTTDRControlTrigger INTEGER
}
snMspsCableTesterVCTTDRControlPortIndex OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Unique number for each interface. The number for each interface must remain
constant at least from one re-initialization of the entity's
network management system to the next re-initialization."
::= { snMspsCableTesterVCTTDRControlEntry 1 }
snMspsCableTesterVCTTDRControlTrigger OBJECT-TYPE
SYNTAX INTEGER {
no-operation(1),
test-port(2),
port-under-test(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Objekt to trigger the virtual cable test:
no-operation(1) no operation,
test-port(2) start a virtual cable test on the selected port,
port-under-test(3) a virtual cable test is currently running."
::= { snMspsCableTesterVCTTDRControlEntry 2 }
-- --------------------------------------------------------------
-- VCTResultTable Sub-Group
-- --------------------------------------------------------------
snMspsCableTesterVCTTDRResultTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsCableTesterVCTTDRResultEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table containing per-port and per-pair result objects for virtual cable test feature
uses Time Domain Reflectometry to determine the quality of cables,
connectors, and terminations.Test can not be performed on fiber based interfaces.
Test causes a link down!"
::= { snMspsCableTesterVCTTDR 11 }
snMspsCableTesterVCTTDRResultEntry OBJECT-TYPE
SYNTAX SnMspsCableTesterVCTTDRResultEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Interface entry containing objects for a particular
interface."
INDEX { snMspsCableTesterVCTTDRResultPortIndex,
snMspsCableTesterVCTTDRResultCablePairIndex }
::= { snMspsCableTesterVCTTDRResultTable 1 }
SnMspsCableTesterVCTTDRResultEntry ::= SEQUENCE {
snMspsCableTesterVCTTDRResultPortIndex INTEGER,
snMspsCableTesterVCTTDRResultCablePairIndex INTEGER,
snMspsCableTesterVCTTDRResultStatus INTEGER,
snMspsCableTesterVCTTDRResultLength INTEGER,
snMspsCableTesterVCTTDRResultDistance INTEGER
}
snMspsCableTesterVCTTDRResultPortIndex OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Unique number for each interface. The number for each interface must remain
constant at least from one re-initialization of the entity's
network management system to the next re-initialization."
::= { snMspsCableTesterVCTTDRResultEntry 1 }
snMspsCableTesterVCTTDRResultCablePairIndex OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Unique number for each cable pair on the interface."
::= { snMspsCableTesterVCTTDRResultEntry 2 }
snMspsCableTesterVCTTDRResultStatus OBJECT-TYPE
SYNTAX INTEGER {
cableNotTested(1),
cableTestFail(2),
cableTestNormal(3),
cableTestImpedanceMismatch(4),
cableTestOpen(5),
cableTestShort(6),
cableTestShortWithPair0(7),
cableTestShortWithPair1(8),
cableTestShortWithPair2(9),
cableTestShortWithPair3(10)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Current status of the virtual cable test:
cableNotTested(1) test not performed,
cableTestFail(2) test not performed successfully,
cableTestNormal(3) test performed - passed,
cableTestImpedanceMismatch(4) test performed - impedance mismatch,
cableTestOpen(5) test performed - open in cable,
cableTestShort(6) test performed - short in cable,
cableTestShortWithPair0(7) test performed - short in TX cable with RX pair 0,
cableTestShortWithPair1(8) test performed - short in TX cable with RX pair 1,
cableTestShortWithPair2(9) test performed - short in TX cable with RX pair 2,
cableTestShortWithPair3(10) test performed - short in TX cable with RX pair 3"
::= { snMspsCableTesterVCTTDRResultEntry 3 }
snMspsCableTesterVCTTDRResultLength OBJECT-TYPE
SYNTAX INTEGER {
lengthLessThan50m(1),
length50m-80m(2),
length80m-110m(3),
length110m-140m(4),
lengthMoreThan140m(5),
lengthUnknown(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Current measured cable length of the virtual cable test, which performed passed:
lengthLessThan50m(1) tested length less than 50m,
length50m-80m(2) tested length between 50m and 80m,
length80m-110m(3) tested length between 80m and 110m,
length110m-140m(4) tested length between 110m and 140m,
lengthMoreThan140m(5) tested length more than 140m,
lengthUnknown(6) length unknown or not tested."
::= { snMspsCableTesterVCTTDRResultEntry 4 }
snMspsCableTesterVCTTDRResultDistance OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Current measured cable length of the virtual cable test, which performed
with a cableTestImpedanceMismatch, cableTestOpen or cableTestShort.
The distance is shown in meter."
::= { snMspsCableTesterVCTTDRResultEntry 5 }
-- ----------------------
-- snMspsDiagnostics.mib
--
-- SIEMENS AG
-- Industry Automation Division
--
-- object definitions for environmental data
--
-- Copyright (c) 2013 Siemens AG
-- All rights reserved.
-- ----------------------------------------------------------------------
--
-- MIB Module : SN-MSPS-DIAGNOSTICS-MIB
--
-- Revision : V0.0.0.2
-- Date : 2018/02/26
--
-- ----------------------------------------------------------------------
snMspsDiagnosticsUsageTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDiagnosticsUsageEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Environmental data of the device and connected parts"
::= {snMspsDiagnostics 3}
snMspsDiagnosticsUsageEntry OBJECT-TYPE
SYNTAX SnMspsDiagnosticsUsageEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A set of objects that contain usage data of one part of the device"
INDEX { snMspsDiagnosticsUsageIndex }
::= { snMspsDiagnosticsUsageTable 1}
SnMspsDiagnosticsUsageEntry::= SEQUENCE {
snMspsDiagnosticsUsageIndex Integer32,
snMspsDiagnosticsUsagePresent TruthValue,
snMspsDiagnosticsUsageName SnmpAdminString,
snMspsDiagnosticsUsageStatus INTEGER,
snMspsDiagnosticsUsageValue Integer32,
snMspsDiagnosticsUsageHighWarning Integer32,
snMspsDiagnosticsUsageHighCritical Integer32
}
snMspsDiagnosticsUsageIndex OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Index variable"
::= { snMspsDiagnosticsUsageEntry 1 }
snMspsDiagnosticsUsagePresent OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Shows if the part is present"
::= { snMspsDiagnosticsUsageEntry 4 }
snMspsDiagnosticsUsageName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Original part description"
::= { snMspsDiagnosticsUsageEntry 7 }
snMspsDiagnosticsUsageStatus OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
warning(2),
critical(3),
invalid(4),
initial(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status of the usage values read from the part
ok(1): No threshold is violated
warning(2): The warning threshold is violated
critical(3): The critical threshold is violated
invalid(4): Reading the environmental data failed
initial(5): No data environmental data was read yet"
::= { snMspsDiagnosticsUsageEntry 10 }
snMspsDiagnosticsUsageValue OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current load/usage value of the part"
::= { snMspsDiagnosticsUsageEntry 13 }
snMspsDiagnosticsUsageHighWarning OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Warning threshold for the load/usage of the part. There will be a warning if SnMspsDiagnosticsUsageValue exceeds this value"
::= { snMspsDiagnosticsUsageEntry 16 }
snMspsDiagnosticsUsageHighCritical OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Critical threshold for the load/usage of the part. There will be an alert if SnMspsDiagnosticsUsageValue exceeds this value"
::= { snMspsDiagnosticsUsageEntry 19 }
snMspsDiagnosticsTemperatureTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDiagnosticsTemperatureEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Environmental data of the device and connected parts"
::= { snMspsDiagnostics 7}
snMspsDiagnosticsTemperatureEntry OBJECT-TYPE
SYNTAX SnMspsDiagnosticsTemperatureEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A set of objects that contain temperature data of one part of the device"
INDEX { snMspsDiagnosticsTemperatureIndex }
::= {snMspsDiagnosticsTemperatureTable 1}
SnMspsDiagnosticsTemperatureEntry ::= SEQUENCE {
snMspsDiagnosticsTemperatureIndex Integer32,
snMspsDiagnosticsTemperaturePresent TruthValue,
snMspsDiagnosticsTemperatureName SnmpAdminString,
snMspsDiagnosticsTemperatureStatus INTEGER,
snMspsDiagnosticsTemperatureSensorStatus Integer32,
snMspsDiagnosticsTemperatureValue Integer32,
snMspsDiagnosticsTemperatureType Integer32,
snMspsDiagnosticsTemperatureScale Integer32,
snMspsDiagnosticsTemperaturePrecision Integer32,
snMspsDiagnosticsTemperatureUnitsDisplay SnmpAdminString,
snMspsDiagnosticsTemperatureTimeStamp Unsigned32,
snMspsDiagnosticsTemperatureUpdateRate Unsigned32,
snMspsDiagnosticsTemperatureHighWarning Integer32,
snMspsDiagnosticsTemperatureHighCritical Integer32,
snMspsDiagnosticsTemperatureLowWarning Integer32,
snMspsDiagnosticsTemperatureLowCritical Integer32
}
snMspsDiagnosticsTemperatureIndex OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Index variable"
::= { snMspsDiagnosticsTemperatureEntry 1 }
snMspsDiagnosticsTemperaturePresent OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Shows if a temperature value for the part is available"
::= { snMspsDiagnosticsTemperatureEntry 4 }
snMspsDiagnosticsTemperatureName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Original part description"
::= { snMspsDiagnosticsTemperatureEntry 7 }
snMspsDiagnosticsTemperatureStatus OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
warning(2),
critical(3),
invalid(4),
initial(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Current status of the temperature read from the part
ok(1): No threshold is violated
warning(2): The warning threshold is violated
critical(3): The critical threshold is violated
invalid(4): Reading the environmental data failed
initial(5): No data environmental data was read yet"
::= { snMspsDiagnosticsTemperatureEntry 10 }
snMspsDiagnosticsTemperatureSensorStatus OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current status of the temperature sensor of the part"
::= { snMspsDiagnosticsTemperatureEntry 13 }
snMspsDiagnosticsTemperatureValue OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current temperature of the part"
::= { snMspsDiagnosticsTemperatureEntry 16 }
snMspsDiagnosticsTemperatureType OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Stub for later ENTITY-SENSOR-MIB use; will always return 8 which stands for temperature in celsius"
::= { snMspsDiagnosticsTemperatureEntry 19 }
snMspsDiagnosticsTemperatureScale OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Stub for later ENTITY-SENSOR-MIB; will always return 8 which stands for celsius"
::= { snMspsDiagnosticsTemperatureEntry 22 }
snMspsDiagnosticsTemperaturePrecision OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Stub for later ENTITY-MIB-use; will allways return 9 which stands for units"
::= { snMspsDiagnosticsTemperatureEntry 25 }
snMspsDiagnosticsTemperatureUnitsDisplay OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Stub for later ENTITY-SENSOR-MIB use"
::= { snMspsDiagnosticsTemperatureEntry 28 }
snMspsDiagnosticsTemperatureTimeStamp OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Timestamp containing the last time a temperature measurement was taken"
::= { snMspsDiagnosticsTemperatureEntry 31 }
snMspsDiagnosticsTemperatureUpdateRate OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the interval between two measurements in seconds. Zero means, that an update has to be triggered manually"
::= { snMspsDiagnosticsTemperatureEntry 34 }
snMspsDiagnosticsTemperatureHighWarning OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Warning threshold for the part temperature. There will be a warning if SnMspsDiagnosticsTemperatureValue exceeds this value"
::= { snMspsDiagnosticsTemperatureEntry 37 }
snMspsDiagnosticsTemperatureHighCritical OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Critical threshold for the part temperature. There will be an alert if SnMspsDiagnosticsTemperatureValue exceeds this value"
::= { snMspsDiagnosticsTemperatureEntry 40 }
snMspsDiagnosticsTemperatureLowWarning OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Warning threshold for the part temperature. There will be a warning if SnMspsDiagnosticsTemperatureValue falls below this value"
::= { snMspsDiagnosticsTemperatureEntry 43 }
snMspsDiagnosticsTemperatureLowCritical OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Critical threshold for the part temperature. There will be an alert if SnMspsDiagnosticsTemperatureValue falls below this value"
::= { snMspsDiagnosticsTemperatureEntry 46 }
-- -----------------------------------------------------------------
-- END OF ENV_DATA_DIAGNOSTICS Table
-- -----------------------------------------------------------------
END
Reference in New Issue View Git Blame Copy Permalink