468 lines
17 KiB
Plaintext
468 lines
17 KiB
Plaintext
-- ************************************************************
|
|
-- SILVERPEAK-MGMT-MIB.txt: Silver Peak Systems, Inc
|
|
-- System Status MIB
|
|
--
|
|
-- Copyright (c) 2012 Silver Peak Systems, Inc.
|
|
-- All rights reserved.
|
|
--
|
|
-- ************************************************************
|
|
--
|
|
|
|
SILVERPEAK-MGMT-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
|
|
FROM SNMPv2-CONF
|
|
MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-TYPE
|
|
FROM SNMPv2-SMI
|
|
DisplayString
|
|
FROM SNMPv2-TC
|
|
SilverpeakAlarmSeverity,
|
|
SilverpeakSeqNum,
|
|
SilverpeakYesNo
|
|
FROM SILVERPEAK-TC
|
|
silverpeakMgmt,
|
|
silverpeakNotifications
|
|
FROM SILVERPEAK-SMI;
|
|
|
|
silverpeakMgmtMIB MODULE-IDENTITY
|
|
LAST-UPDATED "201201060000Z"
|
|
ORGANIZATION "Silver Peak Systems, Inc."
|
|
CONTACT-INFO
|
|
" URL: http://www.silver-peak.com/contact
|
|
E-mail: support@silver-peak.com "
|
|
DESCRIPTION
|
|
"This module defines the management variables used to manage
|
|
and monitor appliance status."
|
|
::= { silverpeakMgmt 1 }
|
|
|
|
--
|
|
-- Base assignments
|
|
--
|
|
|
|
silverpeakMgmtMIBObjects OBJECT IDENTIFIER ::= { silverpeakMgmtMIB 1 }
|
|
silverpeakMgmtMIBNotifications OBJECT IDENTIFIER ::= { silverpeakNotifications 1 }
|
|
silverpeakMgmtMIBConformance OBJECT IDENTIFIER ::= { silverpeakMgmtMIB 2 }
|
|
|
|
--
|
|
-- Status Scalars
|
|
--
|
|
silverpeakMgmtMIBScalars OBJECT IDENTIFIER ::= { silverpeakMgmtMIBObjects 1 }
|
|
|
|
spsSystemVersion OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"System software version string"
|
|
::= { silverpeakMgmtMIBScalars 1 }
|
|
|
|
spsProductModel OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"System product model"
|
|
::= { silverpeakMgmtMIBScalars 2 }
|
|
|
|
spsOperStatus OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current operational state of the appliance."
|
|
::= { silverpeakMgmtMIBScalars 3 }
|
|
|
|
spsActiveAlarmCount OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of active alarm entries in the alarm table -
|
|
spsActiveAlarmTable, defined under silverpeakMgmtMIBTables
|
|
subtree."
|
|
::= { silverpeakMgmtMIBScalars 4 }
|
|
|
|
spsSystemUptime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The amount of time in hundredth of a second since
|
|
this NX was last initialized. Note that this is
|
|
different from sysUpTime in the SNMPv2-MIB [RFC1907]
|
|
because sysUpTime is the uptime of the network
|
|
management portion of the system."
|
|
::= { silverpeakMgmtMIBScalars 5 }
|
|
|
|
spsSystemSerial OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"System serial number string"
|
|
::= { silverpeakMgmtMIBScalars 6 }
|
|
|
|
--
|
|
-- Status Tables
|
|
--
|
|
silverpeakMgmtMIBTables OBJECT IDENTIFIER ::= { silverpeakMgmtMIBObjects 2 }
|
|
|
|
--
|
|
-- Active alarm table
|
|
--
|
|
|
|
spsActiveAlarmTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ActiveAlarmEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of the active alarm entries. This represents the fault
|
|
conditions that are still active in the appliance.
|
|
"
|
|
::= { silverpeakMgmtMIBTables 1 }
|
|
|
|
activeAlarmEntry OBJECT-TYPE
|
|
SYNTAX ActiveAlarmEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The active alarm entries that are still valid system faults."
|
|
INDEX { spsActiveAlarmIndex }
|
|
::= { spsActiveAlarmTable 1 }
|
|
|
|
ActiveAlarmEntry ::= SEQUENCE {
|
|
spsActiveAlarmIndex INTEGER,
|
|
spsActiveAlarmSeqNum SilverpeakSeqNum,
|
|
spsActiveAlarmSeverity SilverpeakAlarmSeverity,
|
|
spsActiveAlarmName DisplayString,
|
|
spsActiveAlarmDescr DisplayString,
|
|
spsActiveAlarmSource DisplayString,
|
|
spsActiveAlarmType DisplayString,
|
|
spsActiveAlarmAcked SilverpeakYesNo,
|
|
spsActiveAlarmActive SilverpeakYesNo,
|
|
spsActiveAlarmClearable SilverpeakYesNo,
|
|
spsActiveAlarmLogTime OCTET STRING,
|
|
spsActiveAlarmServiceAffect SilverpeakYesNo,
|
|
spsActiveAlarmTypeId INTEGER
|
|
}
|
|
|
|
spsActiveAlarmIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index that uniquely identifies an entry in the
|
|
active alarm table."
|
|
::= { activeAlarmEntry 1 }
|
|
|
|
spsActiveAlarmSeqNum OBJECT-TYPE
|
|
SYNTAX SilverpeakSeqNum
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The active alarm's sequence number at the time it was generated."
|
|
::= { activeAlarmEntry 2 }
|
|
|
|
spsActiveAlarmSeverity OBJECT-TYPE
|
|
SYNTAX SilverpeakAlarmSeverity
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The alarm severity for the active alarm."
|
|
::= { activeAlarmEntry 3 }
|
|
|
|
spsActiveAlarmName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A short name for the active alarm."
|
|
::= { activeAlarmEntry 4 }
|
|
|
|
spsActiveAlarmDescr OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A description for the active alarm."
|
|
::= { activeAlarmEntry 5 }
|
|
|
|
spsActiveAlarmSource OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The source for the active alarm."
|
|
::= { activeAlarmEntry 6 }
|
|
|
|
spsActiveAlarmType OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The alarm type for the active alarm."
|
|
::= { activeAlarmEntry 7 }
|
|
|
|
spsActiveAlarmAcked OBJECT-TYPE
|
|
SYNTAX SilverpeakYesNo
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Identifies if the user has acknowledged the alarm."
|
|
::= { activeAlarmEntry 8 }
|
|
|
|
spsActiveAlarmActive OBJECT-TYPE
|
|
SYNTAX SilverpeakYesNo
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Identifies if the alarm is currently active."
|
|
::= { activeAlarmEntry 9 }
|
|
|
|
spsActiveAlarmClearable OBJECT-TYPE
|
|
SYNTAX SilverpeakYesNo
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Identifies if the user can manually clear the alarm."
|
|
::= { activeAlarmEntry 10 }
|
|
|
|
spsActiveAlarmLogTime OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of sysUpTime when the alarm was generated."
|
|
::= { activeAlarmEntry 11 }
|
|
|
|
spsActiveAlarmServiceAffect OBJECT-TYPE
|
|
SYNTAX SilverpeakYesNo
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Identifies if the alarm is service affecting."
|
|
::= { activeAlarmEntry 12 }
|
|
|
|
spsActiveAlarmTypeId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An ID that uniquely identifies a type of alarm.
|
|
The following is a list of currently defined type IDs
|
|
(ID listed below is in hexadecimal):
|
|
|
|
ID Description
|
|
----- ------------------------------------------
|
|
10000 Tunnel remote ID is misconfigured
|
|
10001 Tunnel state is Down
|
|
10002 Tunnel VRRP IP is misconfigured
|
|
10003 Tunnel keepalive version mismatch
|
|
10004 Tunnel WCCP GID is misconfigured
|
|
10005 Tunnel software version mismatch
|
|
10006 Connecting to a non-VX-X is not supported.
|
|
Please contact sales@silver-peak.com to discuss your options.
|
|
10007 Duplicate Silver Peak license detected on peer device.
|
|
10008 Tunnel local IP address not owned by this appliance
|
|
10009 Tunnel software version mismatch results in reduced functionality.
|
|
1000a Tunnel peer encapsulation mode mismatch detected.
|
|
1000b UDP Destination Port is the same as flow redirection port
|
|
|
|
20000 Tunnel has unexpected traffic class error
|
|
|
|
30000 RAID array is degraded
|
|
30001 Disk is failed
|
|
30002 Disk is degraded
|
|
30003 Fan failure detected
|
|
30004 System bypass mode
|
|
30005 LAN/WAN fail-to-wire card failure
|
|
30006 LAN/WAN fail-to-wire card relay failure
|
|
30007 Encryption card hardware failure
|
|
30008 Network interface admin down
|
|
30009 Network interface link down
|
|
3000a Management interface link down
|
|
3000b Interface is half duplex
|
|
3000c Interface speed is 10 Mbps
|
|
3000d Config DB disk full
|
|
3000e Operating System disk full
|
|
3000f File system disk full
|
|
30010 Datapath internal loopback test failed
|
|
30011 WAN next-hop unreachable
|
|
30012 VRRP instance is down
|
|
30013 VRRP state changed from Master to Backup
|
|
30014 WAN next-hop router discovered on a LAN port
|
|
(box is in backwards)
|
|
30015 Disk is not in service
|
|
30016 Disk is rebuilding
|
|
30017 Disk removed by operator
|
|
30018 LAN/WAN interfaces have different admin states
|
|
30019 LAN/WAN interfaces have different link carrier states
|
|
3001a LAN/WAN interface has been shutdown due to
|
|
link propagation of paired interface
|
|
3001b Disk SMART threshold exceeded
|
|
3001c Flow redirection cluster peer is down
|
|
3001d Bonding members have different speed/duplex
|
|
3001e WCCP adjacency(ies) down
|
|
3001f WCCP assignment table mismatch
|
|
30020 Power supply not connected, not powered or failed
|
|
30021 NIC interface failure
|
|
30022 LAN next-hop unreachable
|
|
30023 Unexpected system restart
|
|
30024 Insufficient configured memory size for this virtual appliance
|
|
30025 Insufficient configured processor count for this virtual appliance
|
|
30026 Insufficient configured disk storage for this virtual appliance
|
|
30027 Interfaces have different MTUs
|
|
30028 Interfaces have different MTUs
|
|
30029 Bridge loop is detected
|
|
3002a Bridge creation failed
|
|
3002b Network interface is unassigned
|
|
3002c System optimization turned off
|
|
3002d Sub-optimal configured memory size for this virtual appliance
|
|
3002e Sub-optimal configured processor count for this virtual appliance
|
|
3002f Sub-optimal configured disk storage for this virtual appliance
|
|
|
|
|
|
40000 Software upgrade process has failed
|
|
40001 System is low on resources
|
|
40002 Significant change in time of day has occurred,
|
|
and might compromise statistics.
|
|
40003 The licensing for this virtual appliance has expired.
|
|
40004 There is no license installed on this virtual appliance.
|
|
40005 A disk self test has been performed. The system will
|
|
require a reboot after the test.
|
|
40006 The SSL private key is invalid.
|
|
40007 The SSL certificate is not yet valid.
|
|
40008 The SSL certificate has expired.
|
|
40009 The NTP server is unreachable.
|
|
4000a Virtual appliance license expires on yyyy/mm/dd.
|
|
4000b Virtual appliance license expires on yyyy/mm/dd.
|
|
4000c Invalid virtual appliance license.
|
|
4000d Dual Wan-nexthop topology configuration no longer supported.
|
|
4000e Setting system wan-nexthop to VLAN nhop is no longer necessary.
|
|
4000f Minor inconsistencies during QOS upgrade.
|
|
40010 Major inconsistencies during QOS upgrade.
|
|
40011 Tunnel IP hdr disable setting was discarded during upgrade.
|
|
40012 A very large range has been configured for a local subnet.
|
|
40013 A peer name has been specified in a route-map that can't be resolved.
|
|
40014 Shaper max bandwidth exceeds system bandwidth
|
|
40015 Software capability token exceeds warning threshold
|
|
40016 Software capability token has exceeded the required limit
|
|
40017 Silvepeak Portal is unreachable
|
|
40018 Silverpeak Portal is unreachable for setting up a remote help session
|
|
40019 An application has been deleted on the Silver Peak portal
|
|
4001a Boost Limiting MTS
|
|
4001b Bad portal registration data
|
|
4001c EdgeConnect Base license not granted
|
|
4001d Orchestrator is unreachable from appliance using HTTPS
|
|
4001e Silver Peak Portal is unreachable for licensing
|
|
4001f Silver Peak Portal hostname cannot be resolved
|
|
40020 Edge Connect Plus license not granted
|
|
40021 Edge Connect Boost license not granted
|
|
40022 Appliance has not been approved for licensing by Orchestrator
|
|
40023 Software capability token related alarm
|
|
40024 A NATed interface connected to Internet has no public IP address
|
|
40025 Initial admin password is not yet changed
|
|
40026 DHCP server mis-configuration
|
|
40027 Subnet table has exceeded high-water level for BGP/OSPF entries
|
|
40028 Subnet table has reached maximum capacity
|
|
40029 Unable to resolve Orchestrator DNS name
|
|
4002a Builtin CA certificate is not valid
|
|
4002b CA certificate Bundle is not valid
|
|
4002c A BGP peer session is no longer in Established state
|
|
4002d An IP SLA monitor is in Down state
|
|
4002e An OSPF neighbor session is no longer in Full state
|
|
4002f DNS Proxy is down
|
|
40030 EC Licensing Warning
|
|
|
|
|
|
50001 WAN-side transmit throughput TCA
|
|
50002 LAN-side receive throughput TCA
|
|
50003 Total number of optimized flows TCA
|
|
50004 Total number of flows TCA
|
|
50005 File-system utilization TCA
|
|
50006 Tunnel latency TCA
|
|
50007 Tunnel loss pre-FEC TCA
|
|
50008 Tunnel loss post-FEC TCA
|
|
50009 Tunnel OOP pre-POC TCA
|
|
5000a Tunnel OOP post-POC TCA
|
|
5000b Tunnel utilization TCA
|
|
5000c Tunnel reduction TCA
|
|
5000d Appliance capacity TCA
|
|
----- ------------------------------------------"
|
|
::= { activeAlarmEntry 13 }
|
|
|
|
--
|
|
-- Notifications
|
|
--
|
|
|
|
spsNotifyAlarm NOTIFICATION-TYPE
|
|
OBJECTS { spsActiveAlarmSource,
|
|
spsActiveAlarmSeverity,
|
|
spsActiveAlarmDescr
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A notification that the system has just generated and alarm."
|
|
::= { silverpeakMgmtMIBNotifications 1 }
|
|
|
|
|
|
--
|
|
-- Conformance information
|
|
--
|
|
|
|
silverpeakMgmtMIBCompliances OBJECT IDENTIFIER ::= { silverpeakMgmtMIBConformance 1 }
|
|
silverpeakMgmtMIBGroups OBJECT IDENTIFIER ::= { silverpeakMgmtMIBConformance 2 }
|
|
|
|
-- Compliance statements
|
|
|
|
silverpeakMgmtCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION "The compliance statement for agents implementing
|
|
silverpeakMgmtMIB."
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
silverpeakMgmtGroup,
|
|
silverpeakMgmtNotifyGroup
|
|
}
|
|
::= { silverpeakMgmtMIBCompliances 1 }
|
|
|
|
--
|
|
-- Units of conformance
|
|
--
|
|
|
|
silverpeakMgmtGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
spsSystemVersion,
|
|
spsProductModel,
|
|
spsOperStatus,
|
|
spsActiveAlarmSeqNum,
|
|
spsActiveAlarmSeverity,
|
|
spsActiveAlarmName,
|
|
spsActiveAlarmDescr,
|
|
spsActiveAlarmSource,
|
|
spsActiveAlarmType,
|
|
spsActiveAlarmAcked,
|
|
spsActiveAlarmActive,
|
|
spsActiveAlarmClearable,
|
|
spsActiveAlarmLogTime,
|
|
spsActiveAlarmServiceAffect
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "A collection of objects used to retrieve management
|
|
information from Silverpeak Systems appliances.
|
|
"
|
|
::= { silverpeakMgmtMIBGroups 1 }
|
|
|
|
silverpeakMgmtNotifyGroup NOTIFICATION-GROUP
|
|
NOTIFICATIONS {
|
|
spsNotifyAlarm
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "A collection of the Notifications supported in
|
|
the management MIB."
|
|
::= { silverpeakMgmtMIBGroups 3 }
|
|
|
|
END
|
|
|