242 lines
6.3 KiB
Plaintext
242 lines
6.3 KiB
Plaintext
-- SmartOptics Enterprise Specific Port MIB.
|
|
--
|
|
-- Copyright (c) 2014, SmartOptics
|
|
-- All rights reserved
|
|
--
|
|
|
|
MSERIES-PORT-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, Integer32
|
|
FROM SNMPv2-SMI
|
|
DisplayString
|
|
FROM SNMPv2-TC
|
|
OBJECT-GROUP, MODULE-COMPLIANCE
|
|
FROM SNMPv2-CONF
|
|
PortType, PortStatus, PortMode
|
|
FROM MSERIES-TC
|
|
mseries
|
|
FROM MSERIES-MIB;
|
|
|
|
smartPort MODULE-IDENTITY
|
|
LAST-UPDATED "201402121344Z"
|
|
ORGANIZATION "SmartOptics"
|
|
CONTACT-INFO "http://www.smartoptics.com"
|
|
DESCRIPTION
|
|
"This is the enterprise specific Port MIB for SmartOptics M-Series."
|
|
REVISION "201402121344Z"
|
|
DESCRIPTION
|
|
"The initial revision of the MSERIES Port MIB."
|
|
|
|
::= { mseries 3 }
|
|
|
|
smartPortObjects OBJECT IDENTIFIER
|
|
::= { smartPort 1 }
|
|
|
|
smartPortGeneral OBJECT IDENTIFIER
|
|
::= { smartPortObjects 1}
|
|
|
|
smartPortList OBJECT IDENTIFIER
|
|
::= { smartPortObjects 2}
|
|
|
|
smartPortMIBConformance OBJECT IDENTIFIER
|
|
::= { smartPort 2}
|
|
|
|
smartPortGroups OBJECT IDENTIFIER
|
|
::= { smartPortMIBConformance 1}
|
|
|
|
smartPortCompliances OBJECT IDENTIFIER
|
|
::= { smartPortMIBConformance 2}
|
|
|
|
|
|
--
|
|
-- General
|
|
--
|
|
|
|
--
|
|
-- The Port Table
|
|
--
|
|
|
|
smartPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SmartPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A port table."
|
|
::= { smartPortList 1 }
|
|
|
|
smartPortEntry OBJECT-TYPE
|
|
SYNTAX SmartPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the port list."
|
|
INDEX { smartPortIndex }
|
|
::= { smartPortTable 1 }
|
|
|
|
SmartPortEntry ::=
|
|
SEQUENCE {
|
|
smartPortIndex Unsigned32,
|
|
smartPortName DisplayString,
|
|
smartPortAlias DisplayString,
|
|
smartPortType PortType,
|
|
smartPortPower Integer32,
|
|
smartPortStatus PortStatus,
|
|
smartPortMode PortMode,
|
|
smartPortHighPowerAlarmThreshold Integer32,
|
|
smartPortLowPowerAlarmThreshold Integer32
|
|
}
|
|
|
|
smartPortIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique index for each port that corresponds to the index in the interface table"
|
|
::= { smartPortEntry 1 }
|
|
|
|
smartPortName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of the port."
|
|
::= { smartPortEntry 2 }
|
|
|
|
smartPortAlias OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"User configurable Port Alias for the port.
|
|
|
|
Not writeable in SmartOS v2.3"
|
|
::= { smartPortEntry 3 }
|
|
|
|
smartPortType OBJECT-TYPE
|
|
SYNTAX PortType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of port.
|
|
|
|
rx(1) - Receiving port.
|
|
|
|
tx(2) - Transmitting port.
|
|
|
|
biDi(3) - Bidirectional port."
|
|
::= { smartPortEntry 4 }
|
|
|
|
smartPortPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The power level in units of 0.1 dBm."
|
|
::= { smartPortEntry 5 }
|
|
|
|
smartPortStatus OBJECT-TYPE
|
|
SYNTAX PortStatus
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The operational state for a port.
|
|
|
|
idle(1) - The port is not activated
|
|
|
|
down(2) - The port traffic is lost.
|
|
|
|
up(3) - There is traffic on the port.
|
|
|
|
high(4) - The port got to high power.
|
|
|
|
low(5) - The port got to low power.
|
|
|
|
eyeSafety(6) - The Line Tx port is in Eye Safety Mode.
|
|
This means that either the connector on the
|
|
Line Tx port is not inserted or that you have
|
|
too strong reflection from the line fiber.
|
|
|
|
cd(7) - Channel detected.
|
|
|
|
ncd(8) - No channel detected."
|
|
::= { smartPortEntry 6 }
|
|
|
|
smartPortMode OBJECT-TYPE
|
|
SYNTAX PortMode
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Mode of the Port.
|
|
|
|
normal (1) - The port is active. No alarms
|
|
are beeing suppressed.
|
|
|
|
service (2) . The port is in service mode
|
|
and alarms are beeing suppressed. When service
|
|
is ready smartPortMode should be set to
|
|
'normal' again.
|
|
|
|
Not writeable in SmartOS v2.3"
|
|
::= { smartPortEntry 7 }
|
|
|
|
smartPortHighPowerAlarmThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The threshold for the High Power alarm.
|
|
|
|
Not writeable in SmartOS v2.3"
|
|
::= { smartPortEntry 8 }
|
|
|
|
smartPortLowPowerAlarmThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The threshold for the Low Power alarm.
|
|
|
|
Not writeable in SmartOS v2.3"
|
|
::= { smartPortEntry 9 }
|
|
|
|
|
|
-- ----------------------------------------------------
|
|
-- Conformance
|
|
-- ----------------------------------------------------
|
|
|
|
|
|
-- ----------------------------------------------------
|
|
-- Object and event groups
|
|
-- ----------------------------------------------------
|
|
|
|
smartPortListGroupV1 OBJECT-GROUP
|
|
OBJECTS {
|
|
smartPortIndex,
|
|
smartPortName,
|
|
smartPortAlias,
|
|
smartPortType,
|
|
smartPortPower,
|
|
smartPortStatus,
|
|
smartPortMode,
|
|
smartPortHighPowerAlarmThreshold,
|
|
smartPortLowPowerAlarmThreshold }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Port List MIB objects v1."
|
|
::= { smartPortGroups 1 }
|
|
|
|
-- ----------------------------------------------------
|
|
-- Compliance
|
|
-- ----------------------------------------------------
|
|
|
|
smartPortBasicComplV1 MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Basic implementation requirements for the port MIB V1."
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
smartPortListGroupV1 }
|
|
::= { smartPortCompliances 1 }
|
|
|
|
END |