9353 lines
358 KiB
Plaintext
9353 lines
358 KiB
Plaintext
SUB10SYSTEMS-MIB DEFINITIONS ::=
|
|
|
|
BEGIN
|
|
|
|
-- ****************************************************************************
|
|
-- Title: Sub10 Systems - MIB
|
|
-- Version: 1.9
|
|
-- Date: 2015-06-03 00:00
|
|
-- Comments: This MIB models Sub10 Systems Wireless Ethernet Bridge
|
|
-- range of products. For more product information see
|
|
-- www.sub10systems.com
|
|
-- ****************************************************************************
|
|
|
|
-- ****************************************************************************
|
|
-- Sub10 Systems Ltd Copyright 2014
|
|
-- ****************************************************************************
|
|
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY FROM SNMPv2-SMI
|
|
|
|
OBJECT-TYPE FROM SNMPv2-SMI
|
|
|
|
NOTIFICATION-TYPE FROM SNMPv2-SMI
|
|
|
|
Unsigned32 FROM SNMPv2-SMI
|
|
|
|
Integer32 FROM SNMPv2-SMI
|
|
|
|
Counter32 FROM SNMPv2-SMI
|
|
|
|
Counter64 FROM SNMPv2-SMI
|
|
|
|
enterprises FROM SNMPv2-SMI
|
|
|
|
TEXTUAL-CONVENTION FROM SNMPv2-TC
|
|
|
|
DisplayString FROM SNMPv2-TC
|
|
|
|
DateAndTime FROM SNMPv2-TC
|
|
|
|
RowStatus FROM SNMPv2-TC
|
|
|
|
MODULE-COMPLIANCE FROM SNMPv2-CONF
|
|
|
|
NOTIFICATION-GROUP FROM SNMPv2-CONF
|
|
|
|
OBJECT-GROUP FROM SNMPv2-CONF;
|
|
|
|
|
|
sub10Systems MODULE-IDENTITY
|
|
LAST-UPDATED "201506030000Z"
|
|
ORGANIZATION "Sub10 Systems Ltd"
|
|
CONTACT-INFO "support@sub10systems.com"
|
|
DESCRIPTION "Sub10 Systems MIB"
|
|
|
|
|
|
REVISION "201506030000Z"
|
|
DESCRIPTION "- Airside maximum data rate
|
|
- Removed Eth Link Status from Sub10MeasuredObject"
|
|
|
|
|
|
REVISION "201504070000Z"
|
|
DESCRIPTION "- Multi-Ethernet port MIB.
|
|
- Stats History Time objects read-only"
|
|
|
|
|
|
REVISION "201503300000Z"
|
|
DESCRIPTION "- Default Alarm Severities changed
|
|
- Updated descriptions"
|
|
|
|
|
|
REVISION "201503260000Z"
|
|
DESCRIPTION "- Firmware Upload and Copy control"
|
|
|
|
|
|
REVISION "201503060000Z"
|
|
DESCRIPTION "- Rx and Tx Modulation Mode included in Alarm Management."
|
|
|
|
|
|
REVISION "201503050000Z"
|
|
DESCRIPTION "- Reset Action for Alarm Configuration.
|
|
- Modulation Mode Timers in radio stats."
|
|
|
|
|
|
REVISION "201502270000Z"
|
|
DESCRIPTION "- VLAN filtering and QoS not per ethernet port
|
|
- SNMPv3 Configuration
|
|
- QosState default changed to disabled.
|
|
- Sub10NotificationName type changed to Sub10AlarmName.
|
|
- Added Measured Object Value to Alarm Management and Alarm Notifications.
|
|
- Changed QoSState to QoSActiveState.
|
|
- Added new default Alarm State stateUnknown.
|
|
- Extended Alarm table sub10UnitMgmtAlarmTable to accomodate 64 Fixed and 64 User Defined alarms.
|
|
- Alarm thresholds now Float64 translated as Octetstring
|
|
- SNMP Trap option to Alarm Management.
|
|
- Removed UAS, SES, BBE and ES counters.
|
|
- Added Air Frame Error Ratio (AFER) objects to Radio
|
|
- Rx / Tx Mbps throughput added to ethernet stats and Alarm measured object
|
|
- Remote unit stats added to radio and ethernet current stats
|
|
- Stats history counters make Counter64 where required"
|
|
|
|
|
|
REVISION "201412180000Z"
|
|
DESCRIPTION "- Added Modulation Mode Change counters
|
|
- Radio Link state enum change
|
|
- Snmpv3 control removed till later release"
|
|
|
|
|
|
REVISION "201411190000Z"
|
|
DESCRIPTION "- SyncE configuration moved from sub10EthernetMgmt to sub10UnitMgmt
|
|
- TxPower now TxPowerLimit and change in enumerations
|
|
- Added textual conventions Sub10RadioDataRate, Sub10TxPowerLimit,
|
|
- Sub10MWUType, Sub10AlarmOperation, Sub10AlarmState.
|
|
- Sub10DateTime
|
|
- Notication Alarms now restricted to three types sub10UnitAlarm, sub10EthernetAlarm and sub10RadioAlarm.
|
|
- sub10UnitLclType and sub10UnitLclId changed to sub10UnitLclUnitType and sub10UnitLclUnitId
|
|
- Some DisplayString based objects now Octet String with defined sizes.
|
|
- sub10UnitLclTranceiverTemp and sub10RmtUnitTranceiverTemp removed
|
|
- sub10UnitLclActiveAlarmTable changed to sub10UnitLclAlarmStateTable and all table objects changed name.
|
|
- sub10UnitLclAlarmStateTable simplified to contain only alarm state and alarm time and
|
|
- the sub10UnitLclAlarmStateIndex maps to the same index in the sub10UnitMgmtAlarmTable.
|
|
- Added sub10UnitLclRadioDataRate, sub10UnitLclMWUType.
|
|
- Names of sub10RmtUnitxxx changed to sub10UnitRmtxxx to be consistent with local equivelents.
|
|
- sub10UnitMgmtAlarmTable upgraded to support flexibale configurable monitoring interval, raise and clear
|
|
- operational behaviour, raise and clear intervals. The sub10UnitMgmtAlarmIndex now maps to
|
|
- sub10UnitLclAlarmStateIndex for indication of the state of each configurable alarm.
|
|
- sub10EthMgmtVlan configuration upgrade. Added sub10EthMgmtVlanFiltering, sub10EthMgmtVlanDefaultEnabled,
|
|
- sub10EthMgmtVlanDefaultId, sub10EthMgmtVlanDefaultPriority, sub10EthMgmtVlanDefaultDEI, sub10EthMgmtVlanIngressAction,
|
|
- sub10EthMgmtVlanEgressAction (both currently fixed) and sub10EthMgmtVlanAllowedTable.
|
|
- Removed sub10EthMgmtVlanTrafficAllow, sub10EthMgmtVlanNumber and sub10EthMgmtVlanTable.
|
|
- Added sub10EthStats15mHistTime, sub10RadioStats1mHistTime, sub10RAdioStats15mHistTime, sub10RAdioStats1dHistTime.
|
|
- Added sub10RadioLclAlignmentMode, sub10RadioLclDataRate, sub10RadioLclMWUType, sub10RadioRmtAlignmentMode.
|
|
- sub10RadioMgmtTxPower changed to sub10RadioMgmtTxPowerLimit.
|
|
- Added sub10RadioMgmtTxRxFreq.
|
|
- sub10RadioMgmtAtpc changed to sub10RadioMgmtAPCMode to support Auto Power Control.
|
|
- Added sub10RadioMgmtMWUChannelWidth
|
|
- Added sub10RadioMgmtStats1dPersist.
|
|
- Removed sub10RadioMgmtOperationMode now sub10RadioLclAlignmentMode.
|
|
- Removed sub10RadioStatsGdot826HistoryTable and moved ES, SES, BE and UAS counters into
|
|
- sub10RadioStats1mHistTable, sub10RadioStats1dHistTable and sub10RadioStats1dHistTable.
|
|
- Added sub10UnitMgmtActions for commit / rollback based configuration
|
|
- Firmware Objects
|
|
- Stats status table"
|
|
|
|
|
|
REVISION "201404070000Z"
|
|
DESCRIPTION "The MIB module for all Sub10 Systems Radio products.
|
|
Some of the objects within this MIB may only be
|
|
supported by certain types of product. In these
|
|
cases the object description will state product compliance.
|
|
|
|
Note : This MIB does not include the v320-liberator MIB
|
|
for the Sub10 Systems v320 legacy product. Please refer
|
|
to the liberator-v320 MIB. Some products may
|
|
be backwards compatible and provide support for the
|
|
liberator-v320 MIB.
|
|
|
|
Copyright (C) Sub10Systems (2014)."
|
|
|
|
::= { enterprises 39003 }
|
|
|
|
|
|
|
|
-- ****************************************************************************
|
|
-- Textual Conventions
|
|
-- ****************************************************************************
|
|
Sub10EthInterfaceIndex ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "d"
|
|
STATUS current
|
|
DESCRIPTION "A unique value, greater than zero, for each ethernet type interface."
|
|
SYNTAX Unsigned32(1..2)
|
|
|
|
|
|
Sub10EntryStatus ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "A general configuration type to indicate if a table row is in use or not in use.
|
|
This differs from RowStatus which is a settable object used to create the existence
|
|
of a row in a configurable table. Sub10EntryStatus is intended to be read-only
|
|
and is set internally by the Agent when a table row is populated with valid data."
|
|
SYNTAX INTEGER
|
|
{
|
|
entryInUse(1),
|
|
entryNotInUse(2)
|
|
}
|
|
|
|
|
|
Sub10State ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "A general configuration type to indicate enabled or disabled."
|
|
SYNTAX INTEGER
|
|
{
|
|
stateDisabled(0),
|
|
stateEnabled(1)
|
|
}
|
|
|
|
|
|
Sub10UnitType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "Sub10Systems unit type."
|
|
SYNTAX INTEGER
|
|
{
|
|
baseband100A(0),
|
|
baseband100B(1),
|
|
baseband1000A(2),
|
|
baseband1000B(3),
|
|
v100ROWA(4),
|
|
v100ROWB(5),
|
|
v100FCCA(6),
|
|
v100FCCB(7),
|
|
v1000ROWA(8),
|
|
v1000ROWB(9),
|
|
v1000FCCA(10),
|
|
v1000FCCB2(11),
|
|
e1000ROWA(12),
|
|
e1000ROWB(13),
|
|
e1000FCCA(14),
|
|
e1000FCCB(15)
|
|
}
|
|
|
|
|
|
Sub10TerminalType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "Sub10Systems terminal type. A link must
|
|
have an 'A' end terminal and a 'B' end terminal."
|
|
SYNTAX INTEGER
|
|
{
|
|
terminalA(0),
|
|
terminalB(1)
|
|
}
|
|
|
|
|
|
Sub10Availability ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "Availability selects RSSI thresholds for modulation changes."
|
|
SYNTAX INTEGER
|
|
{
|
|
availabilityHigh(0),
|
|
availabilityMedium(1),
|
|
availabilityLow(2)
|
|
}
|
|
|
|
|
|
Sub10AlignmentMode ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "Alignment mode is modeAlignment(1) if the alignment / reset cap
|
|
has been removed for > 5sec otherwise modeNormal(0). The alignment
|
|
mode is managed using sub10RadioMgmtAlignmentMode."
|
|
SYNTAX INTEGER
|
|
{
|
|
modeNormal(0),
|
|
modeAlignment(1)
|
|
}
|
|
|
|
|
|
Sub10AlignmentModeLock ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "If locked, the unit will not go into alignment mode when the
|
|
alignment cap is removed."
|
|
SYNTAX INTEGER
|
|
{
|
|
modeUnlocked(0),
|
|
modeLocked(1)
|
|
}
|
|
|
|
|
|
Sub10OperStatus ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "The status of the ethernet link, this maps directly to ifOperStatus."
|
|
SYNTAX INTEGER
|
|
{
|
|
opStatusUp(1),
|
|
opStatusDown(2),
|
|
opStatusTesting(3),
|
|
opStatusUnknown(4),
|
|
opStatusDormant(5),
|
|
opStatusNotPresent(6),
|
|
opStatusLowerLayerDown(7)
|
|
}
|
|
|
|
|
|
Sub10Duplex ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "The operation of a duplex link link"
|
|
SYNTAX INTEGER
|
|
{
|
|
halfDuplex(1),
|
|
fullDuplex(2),
|
|
unknownDuplex(3)
|
|
}
|
|
|
|
|
|
Sub10MDIType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "The operation of a duplex link link.
|
|
The setting of 'auto' is used only
|
|
for configuration puprposes."
|
|
SYNTAX INTEGER
|
|
{
|
|
mdi(1),
|
|
mdix(2),
|
|
mdiUnknown(3)
|
|
}
|
|
|
|
|
|
Sub10RadioLinkState ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "The status of the radio link"
|
|
SYNTAX INTEGER
|
|
{
|
|
radioLinkStateDown(0),
|
|
radioLinkStateUp(1),
|
|
radioLinkStateUnknown(2)
|
|
}
|
|
|
|
|
|
Sub10AlarmName ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "32a"
|
|
STATUS current
|
|
DESCRIPTION "Name convention for all notification types."
|
|
SYNTAX OCTET STRING (SIZE (1..32))
|
|
|
|
|
|
Sub10MacAddress ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "17a"
|
|
STATUS current
|
|
DESCRIPTION "MAC Address in readable string format."
|
|
SYNTAX OCTET STRING (SIZE (11..17))
|
|
|
|
|
|
Sub10AlarmState ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "Alarm state."
|
|
SYNTAX INTEGER
|
|
{
|
|
cleared(1),
|
|
raised(2),
|
|
stateUnknown(3)
|
|
}
|
|
|
|
|
|
Sub10DateTime ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "19a"
|
|
STATUS current
|
|
DESCRIPTION "The generic Sub10 format for a date time string.
|
|
Format is YYYY-MM-DD HH:MM:SS e.g. 2014-05-26 13:30:15"
|
|
SYNTAX OCTET STRING (SIZE (19..19))
|
|
|
|
|
|
Sub10AlarmIndex ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "d"
|
|
STATUS current
|
|
DESCRIPTION "The MIB index used to define the range of indexing and size of the Alarm tables
|
|
sub10UnitLclAlarmStateTable and sub10UnitMgmtAlarmTable."
|
|
SYNTAX Unsigned32(1..128)
|
|
|
|
|
|
Sub10MeasuredObject ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "A MIB object that may be measured by Alarm Management or any other sub-system."
|
|
SYNTAX INTEGER
|
|
{
|
|
sub10UnitLclMWUTemperature(1),
|
|
sub10RadioLclRxPower(2),
|
|
sub10RadioLclVectErr(3),
|
|
sub10RadioLclLnkLoss(4),
|
|
sub10RadioLclTxPower(5),
|
|
sub10RadioMgmtTxRxFreq(6),
|
|
sub10RadioMgmtAPCMode(7),
|
|
sub10RadioMgmtModulationMode(8),
|
|
sub10RadioMgmtAlignmentMode(9),
|
|
sub10RadioLclLinkStatus(10),
|
|
sub10RadioLclRxModulationMode(11),
|
|
sub10RadioLclTxModulationMode(12),
|
|
sub10RadioStatsCurrTxPowerMin(20),
|
|
sub10RadioStatsCurrTxPowerMax(21),
|
|
sub10RadioStatsCurrTxPowerAvg(22),
|
|
sub10RadioStatsCurrRxPowerMin(23),
|
|
sub10RadioStatsCurrRxPowerMax(24),
|
|
sub10RadioStatsCurrRxPowerAvg(25),
|
|
sub10RadioStatsCurrVectErrMin(26),
|
|
sub10RadioStatsCurrVectErrMax(27),
|
|
sub10RadioStatsCurrVectErrAvg(28),
|
|
sub10RadioStatsCurrLnkLossMin(29),
|
|
sub10RadioStatsCurrLnkLossMax(30),
|
|
sub10RadioStatsCurrLnkLossAvg(31),
|
|
sub10RadioStatsCurrMWUTempMin(32),
|
|
sub10RadioStatsCurrMWUTempMax(33),
|
|
sub10RadioStatsCurrMWUTempAvg(34),
|
|
sub10RadioStatsCurrAFERMin(35),
|
|
sub10RadioStatsCurrAFERMax(36),
|
|
sub10RadioStatsCurrAFERAvg(37),
|
|
sub10RadioStats1mHistTxPowerMin(50),
|
|
sub10RadioStats1mHistTxPowerMax(51),
|
|
sub10RadioStats1mHistTxPowerAvg(52),
|
|
sub10RadioStats1mHistRxPowerMin(53),
|
|
sub10RadioStats1mHistRxPowerMax(54),
|
|
sub10RadioStats1mHistRxPowerAvg(55),
|
|
sub10RadioStats1mHistVectErrMin(56),
|
|
sub10RadioStats1mHistVectErrMax(57),
|
|
sub10RadioStats1mHistVectErrAvg(58),
|
|
sub10RadioStats1mHistLnkLossMin(59),
|
|
sub10RadioStats1mHistLnkLossMax(60),
|
|
sub10RadioStats1mHistLnkLossAvg(61),
|
|
sub10RadioStats1mHistMWUTempMin(62),
|
|
sub10RadioStats1mHistMWUTempMax(63),
|
|
sub10RadioStats1mHistMWUTempAvg(64),
|
|
sub10RadioStats1mHistAFERMin(65),
|
|
sub10RadioStats1mHistAFERMax(66),
|
|
sub10RadioStats1mHistAFERAvg(67),
|
|
sub10RadioStats1mHistRxPkts(68),
|
|
sub10RadioStats1mHistTxPkts(69),
|
|
sub10RadioStats1mHistRxMgmtPkts(70),
|
|
sub10RadioStats1mHistTxMgmtPkts(71),
|
|
sub10RadioStats1mHistRxBadFrms(72),
|
|
sub10RadioStats1mHistQPSKTo8PSK(73),
|
|
sub10RadioStats1mHist8PSKToQPSK(74),
|
|
sub10RadioStats1mHistRxQPSK(75),
|
|
sub10RadioStats1mHistRx8PSK(76),
|
|
sub10RadioStats1mHistTxQPSK(77),
|
|
sub10RadioStats1mHistTx8PSK(78),
|
|
sub10RadioStats15mHistTxPowerMin(90),
|
|
sub10RadioStats15mHistTxPowerMax(91),
|
|
sub10RadioStats15mHistTxPowerAvg(92),
|
|
sub10RadioStats15mHistRxPowerMin(93),
|
|
sub10RadioStats15mHistRxPowerMax(94),
|
|
sub10RadioStats15mHistRxPowerAvg(95),
|
|
sub10RadioStats15mHistVectErrMin(96),
|
|
sub10RadioStats15mHistVectErrMax(97),
|
|
sub10RadioStats15mHistVectErrAvg(98),
|
|
sub10RadioStats15mHistLnkLossMin(99),
|
|
sub10RadioStats15mHistLnkLossMax(100),
|
|
sub10RadioStats15mHistLnkLossAvg(101),
|
|
sub10RadioStats15mHistMWUTempMin(102),
|
|
sub10RadioStats15mHistMWUTempMax(103),
|
|
sub10RadioStats15mHistMWUTempAvg(104),
|
|
sub10RadioStats15mHistAFERMin(105),
|
|
sub10RadioStats15mHistAFERMax(106),
|
|
sub10RadioStats15mHistAFERAvg(107),
|
|
sub10RadioStats15mHistRxPkts(108),
|
|
sub10RadioStats15mHistTxPkts(109),
|
|
sub10RadioStats15mHistRxMgmtPkts(110),
|
|
sub10RadioStats15mHistTxMgmtPkts(111),
|
|
sub10RadioStats15mHistRxBadFrms(112),
|
|
sub10RadioStats15mHistQPSKTo8PSK(113),
|
|
sub10RadioStats15mHist8PSKToQPSK(114),
|
|
sub10RadioStats15mHistRxQPSK(115),
|
|
sub10RadioStats15mHistRx8PSK(116),
|
|
sub10RadioStats15mHistTxQPSK(117),
|
|
sub10RadioStats15mHistTx8PSK(118),
|
|
sub10EthStatsCurrRxMbps(140),
|
|
sub10EthStatsCurrTxMbps(141),
|
|
sub10EthStatsCurrRxMbpsMin(142),
|
|
sub10EthStatsCurrRxMbpsMax(143),
|
|
sub10EthStatsCurrRxMbpsAvg(144),
|
|
sub10EthStatsCurrTxMbpsMin(145),
|
|
sub10EthStatsCurrTxMbpsMax(146),
|
|
sub10EthStatsCurrTxMbpsAvg(147),
|
|
sub10EthStats1mHistRxOctets(160),
|
|
sub10EthStats1mHistRxGoodFrms(161),
|
|
sub10EthStats1mHistRxBcastFrms(162),
|
|
sub10EthStats1mHistRxMcastFrms(163),
|
|
sub10EthStats1mHistRxPauseFrms(164),
|
|
sub10EthStats1mHistRxCRCErrs(165),
|
|
sub10EthStats1mHistRxAlignErrs(166),
|
|
sub10EthStats1mHistRxOversized(167),
|
|
sub10EthStats1mHistRxJabberFrms(168),
|
|
sub10EthStats1mHistRxUndersized(169),
|
|
sub10EthStats1mHistRxFragments(170),
|
|
sub10EthStats1mHistRxSOFOvrns(171),
|
|
sub10EthStats1mHistTxOctets(172),
|
|
sub10EthStats1mHistTxGoodFrms(173),
|
|
sub10EthStats1mHistTxBcastFrms(174),
|
|
sub10EthStats1mHistTxMcastFrms(175),
|
|
sub10EthStats1mHistTxPauseFrms(176),
|
|
sub10EthStats1mHistTxDeferred(177),
|
|
sub10EthStats1mHistTxCollsn(178),
|
|
sub10EthStats1mHistTxSnglCollsn(179),
|
|
sub10EthStats1mHistTxMlplCollsn(180),
|
|
sub10EthStats1mHistTxExsvCollsn(181),
|
|
sub10EthStats1mHistTxLtCollsn(182),
|
|
sub10EthStats1mHistTxCSenseErrs(183),
|
|
sub10EthStats1mHistPkts64Octets(184),
|
|
sub10EthStats1mHistPkts65T127(185),
|
|
sub10EthStats1mHistPkts128T255(186),
|
|
sub10EthStats1mHistPkts256T511(187),
|
|
sub10EthStats1mHistPkts512T1023(188),
|
|
sub10EthStats1mHistPkts1024TMax(189),
|
|
sub10EthStats1mHistRxMbpsMin(190),
|
|
sub10EthStats1mHistRxMbpsMax(191),
|
|
sub10EthStats1mHistRxMbpsAvg(192),
|
|
sub10EthStats1mHistTxMbpsMin(193),
|
|
sub10EthStats1mHistTxMbpsMax(194),
|
|
sub10EthStats1mHistTxMbpsAvg(195),
|
|
sub10EthStats15mHistRxOctets(210),
|
|
sub10EthStats15mHistRxGoodFrms(211),
|
|
sub10EthStats15mHistRxBcastFrms(212),
|
|
sub10EthStats15mHistRxMcastFrms(213),
|
|
sub10EthStats15mHistRxPauseFrms(214),
|
|
sub10EthStats15mHistRxCRCErrs(215),
|
|
sub10EthStats15mHistRxAlignErrs(216),
|
|
sub10EthStats15mHistRxOversized(217),
|
|
sub10EthStats15mHistRxJabberFrms(218),
|
|
sub10EthStats15mHistRxUndersized(219),
|
|
sub10EthStats15mHistRxFragments(220),
|
|
sub10EthStats15mHistRxSOFOvrns(221),
|
|
sub10EthStats15mHistTxOctets(222),
|
|
sub10EthStats15mHistTxGoodFrms(223),
|
|
sub10EthStats15mHistTxBcastFrms(224),
|
|
sub10EthStats15mHistTxMcastFrms(225),
|
|
sub10EthStats15mHistTxPauseFrms(226),
|
|
sub10EthStats15mHistTxDeferred(227),
|
|
sub10EthStats15mHistTxCollsn(228),
|
|
sub10EthStats15mHistTxSnglCollsn(229),
|
|
sub10EthStats15mHistTxMlplCollsn(230),
|
|
sub10EthStats15mHistTxExsvCollsn(231),
|
|
sub10EthStats15mHistTxLtCollsn(232),
|
|
sub10EthStats15mHistTxCSenseErrs(233),
|
|
sub10EthStats15mHistPkts64Octets(234),
|
|
sub10EthStats15mHistPkts65T127(235),
|
|
sub10EthStats15mHistPkts128T255(236),
|
|
sub10EthStats15mHistPkts256T511(237),
|
|
sub10EthStats15mHistPkts512T1023(238),
|
|
sub10EthStats15mHistPkts1024TMax(239),
|
|
sub10EthStats15mHistRxMbpsMin(240),
|
|
sub10EthStats15mHistRxMbpsMax(241),
|
|
sub10EthStats15mHistRxMbpsAvg(242),
|
|
sub10EthStats15mHistTxMbpsMin(243),
|
|
sub10EthStats15mHistTxMbpsMax(244),
|
|
sub10EthStats15mHistTxMbpsAvg(245),
|
|
sub10RadioStats1dHistTxPowerMin(260),
|
|
sub10RadioStats1dHistTxPowerMax(261),
|
|
sub10RadioStats1dHistTxPowerAvg(262),
|
|
sub10RadioStats1dHistRxPowerMin(263),
|
|
sub10RadioStats1dHistRxPowerMax(264),
|
|
sub10RadioStats1dHistRxPowerAvg(265),
|
|
sub10RadioStats1dHistVectErrMin(266),
|
|
sub10RadioStats1dHistVectErrMax(267),
|
|
sub10RadioStats1dHistVectErrAvg(268),
|
|
sub10RadioStats1dHistLnkLossMin(269),
|
|
sub10RadioStats1dHistLnkLossMax(270),
|
|
sub10RadioStats1dHistLnkLossAvg(271),
|
|
sub10RadioStats1dHistMWUTempMin(272),
|
|
sub10RadioStats1dHistMWUTempMax(273),
|
|
sub10RadioStats1dHistMWUTempAvg(274),
|
|
sub10RadioStats1dHistAFERMin(275),
|
|
sub10RadioStats1dHistAFERMax(276),
|
|
sub10RadioStats1dHistAFERAvg(277),
|
|
sub10RadioStats1dHistRxPkts(278),
|
|
sub10RadioStats1dHistTxPkts(279),
|
|
sub10RadioStats1dHistRxMgmtPkts(280),
|
|
sub10RadioStats1dHistTxMgmtPkts(281),
|
|
sub10RadioStats1dHistRxBadFrms(282),
|
|
sub10RadioStats1dHistQPSKTo8PSK(283),
|
|
sub10RadioStats1dHist8PSKToQPSK(284),
|
|
sub10RadioStats1dHistRxQPSK(285),
|
|
sub10RadioStats1dHistRx8PSK(286),
|
|
sub10RadioStats1dHistTxQPSK(287),
|
|
sub10RadioStats1dHistTx8PSK(288),
|
|
sub10EthStats1dHistRxOctets(300),
|
|
sub10EthStats1dHistRxGoodFrms(301),
|
|
sub10EthStats1dHistRxBcastFrms(302),
|
|
sub10EthStats1dHistRxMcastFrms(303),
|
|
sub10EthStats1dHistRxPauseFrms(304),
|
|
sub10EthStats1dHistRxCRCErrs(305),
|
|
sub10EthStats1dHistRxAlignErrs(306),
|
|
sub10EthStats1dHistRxOversized(307),
|
|
sub10EthStats1dHistRxJabberFrms(308),
|
|
sub10EthStats1dHistRxUndersized(309),
|
|
sub10EthStats1dHistRxFragments(310),
|
|
sub10EthStats1dHistRxSOFOvrns(311),
|
|
sub10EthStats1dHistTxOctets(312),
|
|
sub10EthStats1dHistTxGoodFrms(313),
|
|
sub10EthStats1dHistTxBcastFrms(314),
|
|
sub10EthStats1dHistTxMcastFrms(315),
|
|
sub10EthStats1dHistTxPauseFrms(316),
|
|
sub10EthStats1dHistTxDeferred(317),
|
|
sub10EthStats1dHistTxCollsn(318),
|
|
sub10EthStats1dHistTxSnglCollsn(319),
|
|
sub10EthStats1dHistTxMlplCollsn(320),
|
|
sub10EthStats1dHistTxExsvCollsn(321),
|
|
sub10EthStats1dHistTxLtCollsn(322),
|
|
sub10EthStats1dHistTxCSenseErrs(323),
|
|
sub10EthStats1dHistPkts64Octets(324),
|
|
sub10EthStats1dHistPkts65T127(325),
|
|
sub10EthStats1dHistPkts128T255(326),
|
|
sub10EthStats1dHistPkts256T511(327),
|
|
sub10EthStats1dHistPkts512T1023(328),
|
|
sub10EthStats1dHistPkts1024TMax(329),
|
|
sub10EthStats1dHistRxMbpsMin(330),
|
|
sub10EthStats1dHistRxMbpsMax(331),
|
|
sub10EthStats1dHistRxMbpsAvg(332),
|
|
sub10EthStats1dHistTxMbpsMin(333),
|
|
sub10EthStats1dHistTxMbpsMax(334),
|
|
sub10EthStats1dHistTxMbpsAvg(335)
|
|
}
|
|
|
|
|
|
Sub10AlarmSeverity ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "Severity for notifications of type alarm"
|
|
SYNTAX INTEGER
|
|
{
|
|
critical(1),
|
|
major(2),
|
|
minor(3),
|
|
warning(4)
|
|
}
|
|
|
|
|
|
Sub10AlarmOperation ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "The operation that is used to compare a measured value with
|
|
a configured alarm threshold which controls the raising
|
|
and clearing of alarms."
|
|
SYNTAX INTEGER
|
|
{
|
|
lessThan(1),
|
|
greaterThan(2),
|
|
lessThanOrEqual(3),
|
|
greaterThanOrEqual(4),
|
|
equal(5),
|
|
notEqual(6)
|
|
}
|
|
|
|
|
|
Sub10AlarmType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "The type of the alarm and defines the type of notification (trap) used
|
|
to inform management entities."
|
|
SYNTAX INTEGER
|
|
{
|
|
sub10UnitAlarm(1),
|
|
sub10EthernetAlarm(2),
|
|
sub10RadioAlarm(3)
|
|
}
|
|
|
|
|
|
Sub10NTPSyncStatus ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "The indication that the systems clock is synchronised with the
|
|
NTP server."
|
|
SYNTAX INTEGER
|
|
{
|
|
ntpOutOfSync(0),
|
|
ntpInSync(1)
|
|
}
|
|
|
|
|
|
Sub10VlanId ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "d"
|
|
STATUS current
|
|
DESCRIPTION "A VLAN Id (12 bits in the TCF part of an ethernet frame)."
|
|
SYNTAX Unsigned32(0..4095)
|
|
|
|
|
|
Sub10VlanTagAction ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "Used in Vlan Mgmt to support Vlan tag manipulaton on the Ethernet interface."
|
|
SYNTAX INTEGER
|
|
{
|
|
tagActionNone(0),
|
|
untag(1),
|
|
tag(2),
|
|
drop(3)
|
|
}
|
|
|
|
|
|
Sub10VlanPriority ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "d"
|
|
STATUS current
|
|
DESCRIPTION "A VLAN Priority or PCP bits (3 bits in the TCF
|
|
part of an ethernet frame). The priority PCP
|
|
bits are based on 802.1p where 0 is the lowest
|
|
and 7 is the highest.
|
|
|
|
Priority Acronym Traffic Types
|
|
0 BK Background
|
|
1 BE Best Effort
|
|
2 EE Excellent Effort
|
|
3 CA Critical Applications
|
|
4 VI Video, 100 ms latency and jitter
|
|
5 VO Voice, 10 ms latency and jitter
|
|
6 IC Internetwork Control
|
|
7 NC Network Control."
|
|
SYNTAX Unsigned32(0..7)
|
|
|
|
|
|
Sub10QoSQueue ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "d"
|
|
STATUS current
|
|
DESCRIPTION "Identifies the QoS queue number for up to 8 queues."
|
|
SYNTAX Unsigned32(0..7)
|
|
|
|
|
|
Sub10TxPowerLimit ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "The settings for Transmit Power limit on the Radio interface.
|
|
A value of txPowerLimitNone means the TxPower is not limited
|
|
by the radio."
|
|
SYNTAX INTEGER
|
|
{
|
|
txPowerLimitNone(0),
|
|
txPowerLimitMinus3(1),
|
|
txPowerLimitMinus6(2),
|
|
txPowerLimitMinus9(3),
|
|
txPowerLimitMinus12(4),
|
|
txPowerLimitMinus15(5)
|
|
}
|
|
|
|
|
|
Sub10RadioDataRate ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "The maximum data rate of the Airside interface."
|
|
SYNTAX INTEGER
|
|
{
|
|
radioDataRate1000(0),
|
|
radioDataRate700(1),
|
|
radioDataRate500(2),
|
|
radioDataRate300(3),
|
|
radioDataRate100(4)
|
|
}
|
|
|
|
|
|
Sub10UserGroup ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "The user group types. A user is assigned to a group where each group
|
|
has specific access privileges."
|
|
SYNTAX INTEGER
|
|
{
|
|
operation(1),
|
|
administration(2),
|
|
maintenance(3),
|
|
engineer(4)
|
|
}
|
|
|
|
|
|
Sub10Snmpv3SecurityLevel ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "The SNMPv3 security level assigned to a group of SNMPv3 users."
|
|
SYNTAX INTEGER
|
|
{
|
|
noAuthNoPriv(1),
|
|
authNoPriv(2),
|
|
authPriv(3)
|
|
}
|
|
|
|
|
|
Sub10Snmpv3AuthProtocol ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "The SNMPv3 authentication protocol assigned to a group of SNMPv3 users."
|
|
SYNTAX INTEGER
|
|
{
|
|
noAuth(1),
|
|
md5(2),
|
|
sha1(3)
|
|
}
|
|
|
|
|
|
Sub10Snmpv3PrivProtocol ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "The SNMPv3 privacy protocol assigned to a group of SNMPv3 users."
|
|
SYNTAX INTEGER
|
|
{
|
|
noPriv(1),
|
|
des(2),
|
|
aes(3)
|
|
}
|
|
|
|
|
|
Sub10MWUType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "The type of MWU."
|
|
SYNTAX INTEGER
|
|
{
|
|
mwuTypeNone(0),
|
|
mwuTypeVBand(1),
|
|
mwuTypeEBand(2)
|
|
}
|
|
|
|
|
|
Sub10FirmwareBank ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "d"
|
|
STATUS current
|
|
DESCRIPTION "Identifies the firmware bank number."
|
|
SYNTAX Unsigned32(1..3)
|
|
|
|
|
|
Sub10StatsGroup ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "The type of stats."
|
|
SYNTAX INTEGER
|
|
{
|
|
statsGroupNone(1),
|
|
statsGroupAll(2),
|
|
statsGroupRadioCurr(3),
|
|
statsGroupRadio1s(4),
|
|
statsGroupRadio1m(5),
|
|
statsGroupRadio15m(6),
|
|
statsGroupRadio1d(7),
|
|
statsGroupEthernetCurr(8),
|
|
statsGroupEthernet1s(9),
|
|
statsGroupEthernet1m(10),
|
|
statsGroupEthernet15m(11),
|
|
statsGroupEthernet1d(12),
|
|
statsGroupRadioCurr60s(13)
|
|
}
|
|
|
|
|
|
Sub10ThroughputMbps ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "32a"
|
|
STATUS current
|
|
DESCRIPTION "Throughput in Mbps (MegaBits per second)."
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
|
|
|
|
Sub10ModulationMode ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "Radio Modulation Mode."
|
|
SYNTAX INTEGER
|
|
{
|
|
modebpsk(0),
|
|
modeqpsk(1),
|
|
mode8psk(2)
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
-- ****************************************************************************
|
|
-- Object Nodes
|
|
-- ****************************************************************************
|
|
sub10Notifications OBJECT IDENTIFIER ::= { sub10Systems 0 }
|
|
sub10Unit OBJECT IDENTIFIER ::= { sub10Systems 3 }
|
|
sub10UnitStatus OBJECT IDENTIFIER ::= { sub10Unit 1 }
|
|
sub10UnitLocalStatus OBJECT IDENTIFIER ::= { sub10UnitStatus 1 }
|
|
sub10UnitRemoteStatus OBJECT IDENTIFIER ::= { sub10UnitStatus 2 }
|
|
sub10UnitMgmt OBJECT IDENTIFIER ::= { sub10Unit 2 }
|
|
sub10UnitMgmtSystem OBJECT IDENTIFIER ::= { sub10UnitMgmt 1 }
|
|
sub10UnitMgmtIp OBJECT IDENTIFIER ::= { sub10UnitMgmt 2 }
|
|
sub10UnitMgmtVlan OBJECT IDENTIFIER ::= { sub10UnitMgmt 3 }
|
|
sub10UnitMgmtUsers OBJECT IDENTIFIER ::= { sub10UnitMgmt 4 }
|
|
sub10UnitMgmtTime OBJECT IDENTIFIER ::= { sub10UnitMgmt 5 }
|
|
sub10UnitMgmtAlarms OBJECT IDENTIFIER ::= { sub10UnitMgmt 6 }
|
|
sub10UnitMgmtSnmp OBJECT IDENTIFIER ::= { sub10UnitMgmt 7 }
|
|
sub10UnitMgmtSmtp OBJECT IDENTIFIER ::= { sub10UnitMgmt 8 }
|
|
sub10UnitMgmtFirmware OBJECT IDENTIFIER ::= { sub10UnitMgmt 9 }
|
|
sub10UnitMgmtDNS OBJECT IDENTIFIER ::= { sub10UnitMgmt 10 }
|
|
sub10UnitMgmtEncryption OBJECT IDENTIFIER ::= { sub10UnitMgmt 11 }
|
|
sub10UnitMgmtLicense OBJECT IDENTIFIER ::= { sub10UnitMgmt 12 }
|
|
sub10UnitMgmtSyncE OBJECT IDENTIFIER ::= { sub10UnitMgmt 13 }
|
|
sub10UnitMgmtActions OBJECT IDENTIFIER ::= { sub10UnitMgmt 20 }
|
|
sub10Ethernet OBJECT IDENTIFIER ::= { sub10Systems 4 }
|
|
sub10EthernetStatus OBJECT IDENTIFIER ::= { sub10Ethernet 1 }
|
|
sub10EthernetLocalStatus OBJECT IDENTIFIER ::= { sub10EthernetStatus 1 }
|
|
sub10EthernetRemoteStatus OBJECT IDENTIFIER ::= { sub10EthernetStatus 2 }
|
|
sub10EthernetMgmt OBJECT IDENTIFIER ::= { sub10Ethernet 2 }
|
|
sub10EthMgmtPhy OBJECT IDENTIFIER ::= { sub10EthernetMgmt 1 }
|
|
sub10EthMgmtVlan OBJECT IDENTIFIER ::= { sub10EthernetMgmt 2 }
|
|
sub10EthMgmtQoS OBJECT IDENTIFIER ::= { sub10EthernetMgmt 3 }
|
|
sub10EthMgmtStats OBJECT IDENTIFIER ::= { sub10EthernetMgmt 4 }
|
|
sub10EthernetStats OBJECT IDENTIFIER ::= { sub10Ethernet 3 }
|
|
sub10EthernetStatsCurrent OBJECT IDENTIFIER ::= { sub10EthernetStats 2 }
|
|
sub10EthernetStatsHistory OBJECT IDENTIFIER ::= { sub10EthernetStats 3 }
|
|
sub10EthernetStats15mHistory OBJECT IDENTIFIER ::= { sub10EthernetStatsHistory 1 }
|
|
sub10EthStats1dHistory OBJECT IDENTIFIER ::= { sub10EthernetStatsHistory 2 }
|
|
sub10Radio OBJECT IDENTIFIER ::= { sub10Systems 5 }
|
|
sub10RadioStatus OBJECT IDENTIFIER ::= { sub10Radio 1 }
|
|
sub10RadioLocalStatus OBJECT IDENTIFIER ::= { sub10RadioStatus 1 }
|
|
sub10RadioRemoteStatus OBJECT IDENTIFIER ::= { sub10RadioStatus 2 }
|
|
sub10RadioMgmt OBJECT IDENTIFIER ::= { sub10Radio 2 }
|
|
sub10RadioMgmtStats OBJECT IDENTIFIER ::= { sub10RadioMgmt 9 }
|
|
sub10RadioStats OBJECT IDENTIFIER ::= { sub10Radio 3 }
|
|
sub10RadioStatsCurrent OBJECT IDENTIFIER ::= { sub10RadioStats 2 }
|
|
sub10RadioStatsHistory OBJECT IDENTIFIER ::= { sub10RadioStats 3 }
|
|
sub10RadioStats1mHistory OBJECT IDENTIFIER ::= { sub10RadioStatsHistory 1 }
|
|
sub10RadioStats15mHistory OBJECT IDENTIFIER ::= { sub10RadioStatsHistory 2 }
|
|
sub10RadioStats1dHistory OBJECT IDENTIFIER ::= { sub10RadioStatsHistory 3 }
|
|
sub10MIBConformance OBJECT IDENTIFIER ::= { sub10Systems 20 }
|
|
sub10MIBCompliances OBJECT IDENTIFIER ::= { sub10MIBConformance 1 }
|
|
sub10MIBGroups OBJECT IDENTIFIER ::= { sub10MIBConformance 2 }
|
|
|
|
-- ****************************************************************************
|
|
-- .sub10Systems.sub10Notifications Objects
|
|
-- ****************************************************************************
|
|
sub10UnitAlarm NOTIFICATION-TYPE
|
|
OBJECTS { sub10UnitMgmtAlarmName,
|
|
sub10UnitLclAlarmState,
|
|
sub10UnitMgmtAlarmSeverity,
|
|
sub10UnitMgmtAlarmMeasObject,
|
|
sub10UnitMgmtAlarmMeasObjectVal,
|
|
sub10UnitMgmtAlarmRaiseOper,
|
|
sub10UnitMgmtAlarmRaiseThresh,
|
|
sub10UnitMgmtAlarmClearOper,
|
|
sub10UnitMgmtAlarmClearThresh
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "A measured object relating the Unit subsystem has been raised or cleared according
|
|
to the configured thresholds. For alarm configuration see sub10UnitMgmtAlarmTable."
|
|
|
|
::= { sub10Notifications 1 }
|
|
|
|
sub10EthernetAlarm NOTIFICATION-TYPE
|
|
OBJECTS { sub10UnitMgmtAlarmName,
|
|
sub10UnitLclAlarmState,
|
|
sub10UnitMgmtAlarmSeverity,
|
|
sub10UnitMgmtAlarmMeasObject,
|
|
sub10UnitMgmtAlarmMeasObjectVal,
|
|
sub10UnitMgmtAlarmRaiseOper,
|
|
sub10UnitMgmtAlarmRaiseThresh,
|
|
sub10UnitMgmtAlarmClearOper,
|
|
sub10UnitMgmtAlarmClearThresh
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "A measured object relating the Ethernet subsystem has been raised or cleared according
|
|
to the configured thresholds. For alarm configuration see sub10UnitMgmtAlarmTable."
|
|
|
|
::= { sub10Notifications 2 }
|
|
|
|
sub10RadioAlarm NOTIFICATION-TYPE
|
|
OBJECTS { sub10UnitMgmtAlarmName,
|
|
sub10UnitLclAlarmState,
|
|
sub10UnitMgmtAlarmSeverity,
|
|
sub10UnitMgmtAlarmMeasObject,
|
|
sub10UnitMgmtAlarmMeasObjectVal,
|
|
sub10UnitMgmtAlarmRaiseOper,
|
|
sub10UnitMgmtAlarmRaiseThresh,
|
|
sub10UnitMgmtAlarmClearOper,
|
|
sub10UnitMgmtAlarmClearThresh
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "A measured object relating the Radio subsystem has been raised or cleared according
|
|
to the configured thresholds. For alarm configuration see sub10UnitMgmtAlarmTable."
|
|
|
|
::= { sub10Notifications 3 }
|
|
|
|
|
|
-- ****************************************************************************
|
|
-- .sub10UnitStatus.sub10UnitLocalStatus Objects
|
|
-- ****************************************************************************
|
|
|
|
sub10UnitLclTime OBJECT-TYPE
|
|
SYNTAX Sub10DateTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The local system time as a display string in the format:-
|
|
YYYY-MM-DD,HH:MM:SS e.g. 2014-5-26,13:30:15"
|
|
|
|
::= { sub10UnitLocalStatus 1 }
|
|
|
|
|
|
sub10UnitLclUnitType OBJECT-TYPE
|
|
SYNTAX Sub10UnitType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Uniquely identifies the local unit product type"
|
|
|
|
::= { sub10UnitLocalStatus 2 }
|
|
|
|
|
|
sub10UnitLclDescription OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The description of the local unit.
|
|
This is synonymous with MIB-II sysDescr."
|
|
|
|
::= { sub10UnitLocalStatus 3 }
|
|
|
|
|
|
sub10UnitLclHWSerialNumber OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..18))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The hardware serial number of the Local Unit.
|
|
This also identifies whether the unit is a V-band or E-band product.
|
|
See sub10UnitLclMWUType."
|
|
|
|
::= { sub10UnitLocalStatus 4 }
|
|
|
|
|
|
sub10UnitLclTerminalName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..63))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The administratively assigned name for the unit.
|
|
This is synonymous with MIB-II sysName and can be
|
|
administratively set via either sysName or sub10UnitMgmtTerminalName."
|
|
|
|
::= { sub10UnitLocalStatus 5 }
|
|
|
|
|
|
sub10UnitLclTerminalType OBJECT-TYPE
|
|
SYNTAX Sub10TerminalType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Uniquely identifies the local terminal type A or B."
|
|
|
|
::= { sub10UnitLocalStatus 6 }
|
|
|
|
|
|
sub10UnitLclLinkName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..63))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The administratively assigned name for the radio link between
|
|
the local and remote units. This generally identifies geographically
|
|
the two ends or a radio link within a site or location.
|
|
This is synonymous with MIB-II sysLocation and can be
|
|
administratively set via either sysLocation or sub10UnitMgmtLinkName."
|
|
|
|
::= { sub10UnitLocalStatus 7 }
|
|
|
|
|
|
sub10UnitLclLinkId OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The administratively assigned identifier for the radio link between
|
|
the local and remote units. The LinkId must be the same value on
|
|
both local and remote units."
|
|
|
|
::= { sub10UnitLocalStatus 8 }
|
|
|
|
|
|
sub10UnitLclSiteName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The administratively assigned physical location of the local unit."
|
|
|
|
::= { sub10UnitLocalStatus 9 }
|
|
|
|
|
|
sub10UnitLclFirmwareLoadedBank OBJECT-TYPE
|
|
SYNTAX Sub10FirmwareBank
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Currently loaded bank. The firmware version running in this bank is
|
|
defined by sub10UnitLclFirmwareVersion."
|
|
|
|
::= { sub10UnitLocalStatus 10 }
|
|
|
|
|
|
sub10UnitLclFirmwareVersion OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..15))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The firmware version currently running on the local unit.
|
|
This is by definition the firmware loaded into the bank
|
|
number defined in sub10UnitLclFirmwareLoadedBank."
|
|
|
|
::= { sub10UnitLocalStatus 11 }
|
|
|
|
|
|
sub10UnitLclIpAddress OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (7..15))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The IP address of the local ethernet interface."
|
|
|
|
::= { sub10UnitLocalStatus 12 }
|
|
|
|
|
|
sub10UnitLclMWUTemperature OBJECT-TYPE
|
|
SYNTAX Integer32(-100..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The modem temperature on the local unit in degrees celsius."
|
|
DEFVAL { 0 }
|
|
|
|
::= { sub10UnitLocalStatus 13 }
|
|
|
|
|
|
sub10UnitLclNTPSyncStatus OBJECT-TYPE
|
|
SYNTAX Sub10NTPSyncStatus
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The indication that the systems clock is synchronised with the
|
|
NTP server."
|
|
DEFVAL { ntpOutOfSync }
|
|
|
|
::= { sub10UnitLocalStatus 14 }
|
|
|
|
|
|
sub10UnitLclAlarmStateTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Sub10UnitLclAlarmStateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The table listing the each active alarm the local unit.
|
|
An active alarm is where the alarm state is 'raised' at the
|
|
specific severity level.
|
|
|
|
The entries in the table correspond to the configured entries in
|
|
sub10UnitMgmtAlarmTable.
|
|
|
|
This table has a single entry per alarm where the index to the table is
|
|
the same index as the associated Alarm configuration
|
|
table sub10UnitMgmtAlarmTable."
|
|
|
|
::= { sub10UnitLocalStatus 15 }
|
|
|
|
|
|
sub10UnitLclAlarmStateEntry OBJECT-TYPE
|
|
SYNTAX Sub10UnitLclAlarmStateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry (row) in the sub10UnitLclAlarmStateTable."
|
|
INDEX { sub10UnitLclAlarmStateIndex }
|
|
|
|
::= { sub10UnitLclAlarmStateTable 1 }
|
|
|
|
Sub10UnitLclAlarmStateEntry ::= SEQUENCE {
|
|
sub10UnitLclAlarmStateIndex Sub10AlarmIndex,
|
|
sub10UnitLclAlarmState Sub10AlarmState,
|
|
sub10UnitLclAlarmStateTime Sub10DateTime
|
|
}
|
|
|
|
sub10UnitLclAlarmStateIndex OBJECT-TYPE
|
|
SYNTAX Sub10AlarmIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The sub10UnitLclAlarmStateTable index.
|
|
The index represents the same index as used in sub10UnitMgmtAlarmTable.
|
|
The entries in the table correspond to the configured entries in
|
|
sub10UnitMgmtAlarmTable."
|
|
|
|
::= { sub10UnitLclAlarmStateEntry 1 }
|
|
|
|
|
|
sub10UnitLclAlarmState OBJECT-TYPE
|
|
SYNTAX Sub10AlarmState
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Internal object to indicate if this alarm is currently in the
|
|
raised or cleared state."
|
|
DEFVAL { stateUnknown }
|
|
|
|
::= { sub10UnitLclAlarmStateEntry 2 }
|
|
|
|
|
|
sub10UnitLclAlarmStateTime OBJECT-TYPE
|
|
SYNTAX Sub10DateTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The local date and time when the last Alarm State
|
|
transition occurred.
|
|
|
|
This object facilitates retrieving all instances of
|
|
alarms that have been raised or have changed state
|
|
since a given point in time.
|
|
|
|
Implementations MUST include the offset from UTC,
|
|
if available. Implementation in environments in which
|
|
the UTC offset is not available is NOT RECOMMENDED."
|
|
|
|
::= { sub10UnitLclAlarmStateEntry 3 }
|
|
|
|
|
|
sub10UnitLclRadioDataRate OBJECT-TYPE
|
|
SYNTAX Sub10RadioDataRate
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The maximum data rate of the Airside interface. This has the same
|
|
value as sub10RadioLclDataRate."
|
|
|
|
::= { sub10UnitLocalStatus 16 }
|
|
|
|
|
|
sub10UnitLclMWUType OBJECT-TYPE
|
|
SYNTAX Sub10MWUType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The local MWU type"
|
|
|
|
::= { sub10UnitLocalStatus 17 }
|
|
|
|
|
|
sub10UnitLclFPGAVersion OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The FPGA Version."
|
|
|
|
::= { sub10UnitLocalStatus 18 }
|
|
|
|
|
|
-- ****************************************************************************
|
|
-- .sub10UnitStatus.sub10UnitRemoteStatus Objects
|
|
-- ****************************************************************************
|
|
|
|
sub10UnitRmtUnitType OBJECT-TYPE
|
|
SYNTAX Sub10UnitType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Uniquely identifies the remote unit product type"
|
|
|
|
::= { sub10UnitRemoteStatus 1 }
|
|
|
|
|
|
sub10UnitRmtTime OBJECT-TYPE
|
|
SYNTAX Sub10DateTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The remote unit local system time as a display string in the format:-
|
|
YYYY-MM-DD,HH:MM:SS e.g. 2014-5-26,13:30:15"
|
|
|
|
::= { sub10UnitRemoteStatus 2 }
|
|
|
|
|
|
sub10UnitRmtTerminalName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..63))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The administratively assigned name for the remote unit.
|
|
This is synonymous with MIB-II sysName."
|
|
|
|
::= { sub10UnitRemoteStatus 3 }
|
|
|
|
|
|
sub10UnitRmtTerminalType OBJECT-TYPE
|
|
SYNTAX Sub10TerminalType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Uniquely identifies the remote terminal type A or B."
|
|
|
|
::= { sub10UnitRemoteStatus 4 }
|
|
|
|
|
|
sub10UnitRmtLinkName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..63))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The administratively assigned name on the remote unit for the radio link between
|
|
the local and remote units. This generally identifies geographically
|
|
the two ends or a radio link within a site or location."
|
|
|
|
::= { sub10UnitRemoteStatus 5 }
|
|
|
|
|
|
sub10UnitRmtLinkId OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The administratively assigned identifier on the remote unit for the radio link between
|
|
the local and remote units. The LinkId must be the same value on
|
|
both local and remote units."
|
|
|
|
::= { sub10UnitRemoteStatus 6 }
|
|
|
|
|
|
sub10UnitRmtHWSerialNumber OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..18))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The hardware serial number of the Remote Unit.
|
|
This also identifies whether the unit is a V-band or E-band product."
|
|
|
|
::= { sub10UnitRemoteStatus 7 }
|
|
|
|
|
|
sub10UnitRmtFirmwareVersion OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..15))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The firmware version currently running on the remote unit.
|
|
This is by definition the firmware loaded into the bank
|
|
currently used for boot. See sub10UnitMgmtFirmware."
|
|
|
|
::= { sub10UnitRemoteStatus 8 }
|
|
|
|
|
|
sub10UnitRmtIpAddress OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (7..15))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The IP address of the remote ethernet interface."
|
|
|
|
::= { sub10UnitRemoteStatus 9 }
|
|
|
|
|
|
sub10UnitRmtMWUTemperature OBJECT-TYPE
|
|
SYNTAX Integer32(-100..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The modem temperature on the local unit in degrees celsius."
|
|
|
|
::= { sub10UnitRemoteStatus 10 }
|
|
|
|
|
|
-- ****************************************************************************
|
|
-- .sub10UnitMgmt.sub10UnitMgmtSystem Objects
|
|
-- ****************************************************************************
|
|
|
|
sub10UnitMgmtTerminalName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..63))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The administratively assigned name for the unit.
|
|
This is synonymous with MIB-II sysName and sub10UnitLocalStatus
|
|
sub10UnitLclTerminalName."
|
|
|
|
::= { sub10UnitMgmtSystem 1 }
|
|
|
|
|
|
sub10UnitMgmtLinkName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..63))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The administratively assigned name for the radio link between
|
|
the local and remote units. This generally identifies geographically
|
|
the two ends or a radio link within a site or location. This is
|
|
synonymous with sub10UnitLocalStatus sub10UnitLclLinkName"
|
|
|
|
::= { sub10UnitMgmtSystem 2 }
|
|
|
|
|
|
sub10UnitMgmtLinkId OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The administratively assigned identifier for the radio link between
|
|
the local and remote units. The LinkId must be the same value on
|
|
both local and remote units. This is synonymous with sub10UnitLocalStatus
|
|
sub10UnitLclLinkId.
|
|
|
|
IMPORTANT: This object is controlled by transaction management.
|
|
Any changes to this object must be transactionally acknowledged
|
|
following a successful set thus protecting against loss of
|
|
communication with the unit. To acknowledge the transaction
|
|
set the object sub10UnitMgmtTransaction to transactionCommit(2)."
|
|
|
|
::= { sub10UnitMgmtSystem 3 }
|
|
|
|
|
|
sub10UnitMgmtSiteName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The administratively assigned physical location of the unit.
|
|
This is synonymous with MIB-II sysLocation and sub10UnitLocalStatus
|
|
sub10UnitLclSiteName."
|
|
|
|
::= { sub10UnitMgmtSystem 4 }
|
|
|
|
|
|
sub10UnitMgmtContactName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The administratively assigned contact for support of the unit.
|
|
This is synonymous with MIB-II sysContact and sub10UnitLocalStatus
|
|
sub10UnitLclContactName."
|
|
DEFVAL { "support@sub10systems.com" }
|
|
|
|
::= { sub10UnitMgmtSystem 5 }
|
|
|
|
|
|
-- ****************************************************************************
|
|
-- .sub10UnitMgmt.sub10UnitMgmtIp Objects
|
|
-- ****************************************************************************
|
|
|
|
sub10UnitMgmtIpMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ipv4(1),
|
|
ipv6(2),
|
|
dhcp(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "IP Address configuration is either manually set as ipv4 or ipv6
|
|
type addreessing or alternatively can be dynamically assigned
|
|
automatically using the Dynamic Host Control Protocol (DHCP).
|
|
|
|
IMPORTANT: This object is controlled by transaction management.
|
|
Any changes to this object must be transactionally acknowledged
|
|
following a successful set thus protecting against loss of
|
|
communication with the unit. To acknowledge the transaction
|
|
set the object sub10UnitMgmtTransaction to transactionCommit(2)."
|
|
DEFVAL { ipv4 }
|
|
|
|
::= { sub10UnitMgmtIp 1 }
|
|
|
|
|
|
sub10UnitMgmtIpAddress OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (7..15))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The administratively assigned IP Address for the management
|
|
channel. This is reflected in the MIB-II ipAddrTable.
|
|
|
|
IMPORTANT: This object is controlled by transaction management.
|
|
Any changes to this object must be transactionally acknowledged
|
|
following a successful set thus protecting against loss of
|
|
communication with the unit. To acknowledge the transaction
|
|
set the object sub10UnitMgmtTransaction to transactionCommit(2)."
|
|
DEFVAL { "192.168.0.22" }
|
|
|
|
::= { sub10UnitMgmtIp 2 }
|
|
|
|
|
|
sub10UnitMgmtIpSubnetMask OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (7..15))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The administratively assigned sub-net mask for the management
|
|
channel. This is reflected in the MIB-II ipAddrTable.
|
|
|
|
IMPORTANT: This object is controlled by transaction management.
|
|
Any changes to this object must be transactionally acknowledged
|
|
following a successful set thus protecting against loss of
|
|
communication with the unit. To acknowledge the transaction
|
|
set the object sub10UnitMgmtTransaction to transactionCommit(2)."
|
|
DEFVAL { "255.255.255.0" }
|
|
|
|
::= { sub10UnitMgmtIp 3 }
|
|
|
|
|
|
sub10UnitMgmtIpDefGateway OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (7..15))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The administratively assigned default gateway for the management
|
|
channel.
|
|
|
|
IMPORTANT: This object is controlled by transaction management.
|
|
Any changes to this object must be transactionally acknowledged
|
|
following a successful set thus protecting against loss of
|
|
communication with the unit. To acknowledge the transaction
|
|
set the object sub10UnitMgmtTransaction to transactionCommit(2)."
|
|
DEFVAL { "192.168.0.1" }
|
|
|
|
::= { sub10UnitMgmtIp 4 }
|
|
|
|
|
|
sub10UnitMgmtIpDHCP OBJECT-TYPE
|
|
SYNTAX Sub10State
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Dynamic Host Control Protocol (DHCP) is enabled or disabled.
|
|
IMPORTANT: This object is controlled by transaction management.
|
|
Any changes to this object must be transactionally acknowledged
|
|
following a successful set thus protecting against loss of
|
|
communication with the unit. To acknowledge the transaction
|
|
set the object sub10UnitMgmtTransaction to transactionCommit(2)."
|
|
DEFVAL { stateDisabled }
|
|
|
|
::= { sub10UnitMgmtIp 5 }
|
|
|
|
|
|
-- ****************************************************************************
|
|
-- .sub10UnitMgmt.sub10UnitMgmtVlan Objects
|
|
-- ****************************************************************************
|
|
|
|
sub10UnitMgmtVlanState OBJECT-TYPE
|
|
SYNTAX Sub10State
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable VLAN for Management traffic. ."
|
|
DEFVAL { stateDisabled }
|
|
|
|
::= { sub10UnitMgmtVlan 1 }
|
|
|
|
|
|
sub10UnitMgmtVlanId OBJECT-TYPE
|
|
SYNTAX Sub10VlanId
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The VLAN Id used to carry management traffic. Only valid
|
|
when the object is set to a non-zero value.
|
|
|
|
IMPORTANT: This object is controlled by transaction management.
|
|
Any changes to this object must be transactionally acknowledged
|
|
following a successful set thus protecting against loss of
|
|
communication with the unit. To acknowledge the transaction
|
|
set the object sub10UnitMgmtTransaction to transactionCommit(2)."
|
|
DEFVAL { 0 }
|
|
|
|
::= { sub10UnitMgmtVlan 2 }
|
|
|
|
|
|
sub10UnitMgmtVlanPriority OBJECT-TYPE
|
|
SYNTAX Unsigned32(0..7)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The VLAN priority inserted into the ethernet frame for all
|
|
management traffic. Only valid when the object
|
|
sub10UnitMgmtVlanId is set to non zero.
|
|
|
|
IMPORTANT: This object is controlled by transaction management.
|
|
Any changes to this object must be transactionally acknowledged
|
|
following a successful set thus protecting against loss of
|
|
communication with the unit. To acknowledge the transaction
|
|
set the object sub10UnitMgmtTransaction to transactionCommit(2)."
|
|
|
|
::= { sub10UnitMgmtVlan 3 }
|
|
|
|
|
|
sub10UnitMgmtVlanDSCP OBJECT-TYPE
|
|
SYNTAX Unsigned32(0..63)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The Differentiated Services Code Point priority inserted
|
|
into the IP header of all management traffic.
|
|
|
|
IMPORTANT: This object is controlled by transaction management.
|
|
Any changes to this object must be transactionally acknowledged
|
|
following a successful set thus protecting against loss of
|
|
communication with the unit. To acknowledge the transaction
|
|
set the object sub10UnitMgmtTransaction to transactionCommit(2)."
|
|
DEFVAL { 0 }
|
|
|
|
::= { sub10UnitMgmtVlan 4 }
|
|
|
|
|
|
sub10UnitMgmtVlanDEI OBJECT-TYPE
|
|
SYNTAX Sub10State
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Set the Drop Eligible Indicator inserted into the ethernet frame for all
|
|
management traffic. Only valid when the object sub10UnitMgmtVlanId is set to non zero.
|
|
The DEI bit is set into the tag control information (TCI)
|
|
field of each management frame. The DEI is a 1 bit field immediately
|
|
following the PCP bits (3 bit field)
|
|
|
|
IMPORTANT: This object is controlled by transaction management.
|
|
Any changes to this object must be transactionally acknowledged
|
|
following a successful set thus protecting against loss of
|
|
communication with the unit. To acknowledge the transaction
|
|
set the object sub10UnitMgmtTransaction to transactionCommit(2)."
|
|
DEFVAL { stateDisabled }
|
|
|
|
::= { sub10UnitMgmtVlan 5 }
|
|
|
|
|
|
-- ****************************************************************************
|
|
-- .sub10UnitMgmt.sub10UnitMgmtUsers Objects
|
|
-- ****************************************************************************
|
|
|
|
sub10UnitMgmtUsersNumber OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..10)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of valid sub10UnitMgmtUsersTable table entries present on this system."
|
|
|
|
::= { sub10UnitMgmtUsers 1 }
|
|
|
|
|
|
sub10UnitMgmtUserTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Sub10UnitMgmtUserEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The table listing the users configured on the unit.
|
|
The number of user entries is sub10UnitMgmtUsersNumber.
|
|
|
|
This table is indexed by user name (sub10UnitMgmtUserName).
|
|
Multiple entries with the same sub10UnitMgmtUserName are not possible.
|
|
|
|
NB. As part of SNMPv3 support this table will be superceded by 'usmUserTable'."
|
|
|
|
::= { sub10UnitMgmtUsers 2 }
|
|
|
|
|
|
sub10UnitMgmtUserEntry OBJECT-TYPE
|
|
SYNTAX Sub10UnitMgmtUserEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry (row) in the sub10UnitMgmtUserTable.
|
|
If the rowStatus is set to notInService(2) then
|
|
the entry is not valid and no columnar objects are returned.
|
|
Usage is as follows:
|
|
|
|
active(1) - Entry is created and in use. Any attempt
|
|
to set this value will first check for
|
|
consistent objects. If objects are found
|
|
to be inconsistent then the entry will not
|
|
be created and an error will be returned.
|
|
|
|
notInService(2) - Entry is not created and not in use. Any attempt
|
|
to set this value will result in the the entry
|
|
remaining created but not accessible and not used.
|
|
|
|
notReady(3) - Entry is created but has inconsistent objects, these
|
|
must be set to correct values before the object can
|
|
be set to active(1).
|
|
|
|
createAndGo(4) - Set this to create a new entry and attempt to make
|
|
the entry active(1). If the entry has inconsistent objects
|
|
then this will set the entry to notReady(3) and an error
|
|
will be returned.
|
|
|
|
createAndWait(5)- Set this to create a new entry.
|
|
This will set rowStatus = notReady(3). Related
|
|
objects can then be set to consistent values
|
|
before row_status can be set to active(1).
|
|
|
|
destroy(6) - Set this to delete an entry."
|
|
INDEX { sub10UnitMgmtUserIndex }
|
|
|
|
::= { sub10UnitMgmtUserTable 1 }
|
|
|
|
Sub10UnitMgmtUserEntry ::= SEQUENCE {
|
|
sub10UnitMgmtUserIndex Unsigned32,
|
|
sub10UnitMgmtUserRowStatus RowStatus,
|
|
sub10UnitMgmtUserName OCTET STRING,
|
|
sub10UnitMgmtUserGroup Sub10UserGroup,
|
|
sub10UnitMgmtUserPassword OCTET STRING,
|
|
sub10UnitMgmtUserPasswordVerify OCTET STRING
|
|
}
|
|
|
|
sub10UnitMgmtUserIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..16)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The sub10UnitMgmtUserTable index."
|
|
|
|
::= { sub10UnitMgmtUserEntry 1 }
|
|
|
|
|
|
sub10UnitMgmtUserRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The row status of this row.
|
|
All table rows are fixed in size
|
|
and as such do not require conceptual row
|
|
creation. Instead the RowStatus is set to
|
|
active(1) or notInService(2) which indicates
|
|
that the row is operationally in use or not.
|
|
The default value is notInService(2) meaning the
|
|
entry is not used by default. To make
|
|
the entry valid this object must be set
|
|
to enabled(1), createAndGo(4) or createAndWait(5).
|
|
To delete the row set this to destroy(6)."
|
|
DEFVAL { notInService }
|
|
|
|
::= { sub10UnitMgmtUserEntry 2 }
|
|
|
|
|
|
sub10UnitMgmtUserName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The unique user name provided by the system administrator."
|
|
|
|
::= { sub10UnitMgmtUserEntry 3 }
|
|
|
|
|
|
sub10UnitMgmtUserGroup OBJECT-TYPE
|
|
SYNTAX Sub10UserGroup
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The user group provided by the system administrator. This
|
|
restricts a user to certain key functions on the web GUI."
|
|
DEFVAL { operation }
|
|
|
|
::= { sub10UnitMgmtUserEntry 4 }
|
|
|
|
|
|
sub10UnitMgmtUserPassword OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (6..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The unique user password provided by the system administrator.
|
|
This object can be set but is not visible when read."
|
|
|
|
::= { sub10UnitMgmtUserEntry 5 }
|
|
|
|
|
|
sub10UnitMgmtUserPasswordVerify OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (6..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The unique user password provided by the system administrator
|
|
use to verify the setting of sub10UnitMgmtUserPassword.
|
|
This object can be set but is not visible when read."
|
|
|
|
::= { sub10UnitMgmtUserEntry 6 }
|
|
|
|
|
|
-- ****************************************************************************
|
|
-- .sub10UnitMgmt.sub10UnitMgmtTime Objects
|
|
-- ****************************************************************************
|
|
|
|
sub10UnitMgmtTimeLocal OBJECT-TYPE
|
|
SYNTAX Sub10DateTime
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The administratively assigned system time defined
|
|
as a display string in the format:-
|
|
|
|
YYYY-MM-DD HH:MM:SS e.g. 2014-05-26 13:30:15"
|
|
|
|
::= { sub10UnitMgmtTime 1 }
|
|
|
|
|
|
sub10UnitMgmtTimeNTPEnabled OBJECT-TYPE
|
|
SYNTAX Sub10State
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The administratively assigned state to enable or disable NTP.
|
|
system cloack assignment automatically using the
|
|
Network Time Protocol (NTP)."
|
|
DEFVAL { stateDisabled }
|
|
|
|
::= { sub10UnitMgmtTime 2 }
|
|
|
|
|
|
sub10UnitMgmtTimeNTPServer1 OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..127))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The administratively assigned primary NTP Server name."
|
|
|
|
::= { sub10UnitMgmtTime 3 }
|
|
|
|
|
|
sub10UnitMgmtTimeNTPServer2 OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..127))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The administratively assigned secondary NTP Server name to
|
|
be used when the primary server is not responding."
|
|
|
|
::= { sub10UnitMgmtTime 4 }
|
|
|
|
|
|
sub10UnitMgmtTimeNTPPort OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The administratively assigned NTP Port number name to
|
|
be used when contacting the NTP server."
|
|
DEFVAL { 123 }
|
|
|
|
::= { sub10UnitMgmtTime 5 }
|
|
|
|
|
|
sub10UnitMgmtTimeNTPSyncStatus OBJECT-TYPE
|
|
SYNTAX Sub10NTPSyncStatus
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The indication that the systems clock is synchronised with the
|
|
NTP server."
|
|
DEFVAL { ntpOutOfSync }
|
|
|
|
::= { sub10UnitMgmtTime 6 }
|
|
|
|
|
|
sub10UnitMgmtDateTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The administratively assigned system defined
|
|
as a standard date-time specification.
|
|
|
|
field octets contents range
|
|
----- ------ -------- -----
|
|
1 1-2 year* 0..65536
|
|
2 3 month 1..12
|
|
3 4 day 1..31
|
|
4 5 hour 0..23
|
|
5 6 minutes 0..59
|
|
6 7 seconds 0..60
|
|
(use 60 for leap-second)
|
|
7 8 deci-seconds 0..9
|
|
8 9 direction from UTC '+' / '-'
|
|
9 10 hours from UTC* 0..13
|
|
10 11 minutes from UTC 0..59
|
|
|
|
* Notes:
|
|
- the value of year is in network-byte order
|
|
- daylight saving time in New Zealand is +13
|
|
|
|
For example, Tuesday May 26, 1992 at 1:30:15 PM EDT would be
|
|
displayed as:
|
|
|
|
1992-5-26,13:30:15.0,-4:0
|
|
|
|
Note that if only local time is known, then timezone
|
|
information (fields 8-10) is not present."
|
|
|
|
::= { sub10UnitMgmtTime 7 }
|
|
|
|
|
|
-- ****************************************************************************
|
|
-- .sub10UnitMgmt.sub10UnitMgmtAlarms Objects
|
|
-- ****************************************************************************
|
|
|
|
sub10UnitMgmtAlarmTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Sub10UnitMgmtAlarmEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The sub10UnitMgmtAlarmTable defines the alarm configuration.
|
|
The first 'N' rows of the table is reserved for fixed alarms
|
|
defined by the manufacturer. Fixed alarms cannot be deleted or their
|
|
names changed, other attributes of a fixed alarm may be modified.
|
|
|
|
The remainder of rows are available for user defined alarms which
|
|
can be created and deleted. The index value 'N' is defined by
|
|
'sub10UnitMgmtAlarmsUserDefStart'. Any attempt to create or delete a row
|
|
in the table with an index less than value of 'sub10UnitMgmtAlarmsUserDefStart'
|
|
will be rejected.
|
|
|
|
This table is indexed by alarm index a number ranging from 1
|
|
to the maximum number of entries in the alarm table.
|
|
User defined alarm name and and alarm severity are configurable allowing multiple
|
|
entries for the same alarm to be raised at different severity levels
|
|
according to different threshold levels. A user defined alarm can be created
|
|
with the same name as a fixed alarm if required. For example the fixed alarm
|
|
'Rx Power Low' monitors the radio receive power and raises an alarm if the
|
|
value is less than a certain threshold. A user defined alarm may be created
|
|
with the same name but a less stringent threshold and a lower seveirty level.
|
|
This allows same alarms to be raised at increasing severity as the condition
|
|
causing the alarm worsens.
|
|
|
|
This table allows configuration of threshold passing behavior,
|
|
threshold values for both raising and clearing the alarms and
|
|
the perceived severity. The alarm forwarding mechanisms can
|
|
be defined for example SNMP trap, syslog and SMTP.
|
|
|
|
No validation of thresholds across different entries of the table
|
|
therefore the administrator must ensure that thresholds are correctly
|
|
set accordingly for the severity of each alarm. This is particularly
|
|
important where a single alarm name is configured to be raised at
|
|
different severity levels."
|
|
|
|
::= { sub10UnitMgmtAlarms 1 }
|
|
|
|
|
|
sub10UnitMgmtAlarmEntry OBJECT-TYPE
|
|
SYNTAX Sub10UnitMgmtAlarmEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry (row) in the sub10UnitMgmtAlarmTable.
|
|
If the rowStatus is set to notInService(2) then
|
|
the entry is not valid and no columnar objects are returned."
|
|
INDEX { sub10UnitMgmtAlarmIndex }
|
|
|
|
::= { sub10UnitMgmtAlarmTable 1 }
|
|
|
|
Sub10UnitMgmtAlarmEntry ::= SEQUENCE {
|
|
sub10UnitMgmtAlarmIndex Sub10AlarmIndex,
|
|
sub10UnitMgmtAlarmRowStatus RowStatus,
|
|
sub10UnitMgmtAlarmName Sub10AlarmName,
|
|
sub10UnitMgmtAlarmSeverity Sub10AlarmSeverity,
|
|
sub10UnitMgmtAlarmMeasObject Sub10MeasuredObject,
|
|
sub10UnitMgmtAlarmMonitorIntvl Unsigned32,
|
|
sub10UnitMgmtAlarmRaiseOper Sub10AlarmOperation,
|
|
sub10UnitMgmtAlarmRaiseThresh OCTET STRING,
|
|
sub10UnitMgmtAlarmClearOper Sub10AlarmOperation,
|
|
sub10UnitMgmtAlarmClearThresh OCTET STRING,
|
|
sub10UnitMgmtAlarmRaiseIntvls Unsigned32,
|
|
sub10UnitMgmtAlarmClearIntvls Unsigned32,
|
|
sub10UnitMgmtAlarmType Sub10AlarmType,
|
|
sub10UnitMgmtAlarmSmtpAddress OCTET STRING,
|
|
sub10UnitMgmtAlarmToSyslog Sub10State,
|
|
sub10UnitMgmtAlarmEnabled Sub10State,
|
|
sub10UnitMgmtAlarmMeasObjectVal DisplayString,
|
|
sub10UnitMgmtAlarmToSNMP Sub10State,
|
|
sub10UnitMgmtAlarmMeasObjIndex Unsigned32
|
|
}
|
|
|
|
sub10UnitMgmtAlarmIndex OBJECT-TYPE
|
|
SYNTAX Sub10AlarmIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The sub10UnitMgmtAlarmTable index."
|
|
|
|
::= { sub10UnitMgmtAlarmEntry 1 }
|
|
|
|
|
|
sub10UnitMgmtAlarmRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The row status of this row.
|
|
All table rows are fixed in size
|
|
and as such do not require conceptual row
|
|
creation. Instead the RowStatus is set to
|
|
active(1) or notInService(2) which indicates
|
|
that the row is operationally in use or not.
|
|
The default value is notInService(2) meaning the
|
|
entry is not used by default. To make
|
|
the entry valid this object must be set
|
|
to enabled(1), createAndGo(4) or createAndWait(5).
|
|
To delete the row set this to destroy(6)."
|
|
DEFVAL { notInService }
|
|
|
|
::= { sub10UnitMgmtAlarmEntry 2 }
|
|
|
|
|
|
sub10UnitMgmtAlarmName OBJECT-TYPE
|
|
SYNTAX Sub10AlarmName
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The alarm name. This is a short descriptive name for the alarm.
|
|
Alarm names can be duplicated across entries in order to define
|
|
the same alarm to be raised and cleared according to different
|
|
thresholds and different severity levels. If the user defines mutiple alarms
|
|
with the same name it important to correctly configure severity and
|
|
thresholds to avoid multiple alarms being generated for the same condition.
|
|
Fixed alarm names cannot be modified. Fixed alarms are populated
|
|
automatically in rows 1 to ('sub10UnitMgmtAlarmsUserDefStart'-1)"
|
|
|
|
::= { sub10UnitMgmtAlarmEntry 3 }
|
|
|
|
|
|
sub10UnitMgmtAlarmSeverity OBJECT-TYPE
|
|
SYNTAX Sub10AlarmSeverity
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The alarm severity. This is added to each alarm as a parameter."
|
|
|
|
::= { sub10UnitMgmtAlarmEntry 4 }
|
|
|
|
|
|
sub10UnitMgmtAlarmMeasObject OBJECT-TYPE
|
|
SYNTAX Sub10MeasuredObject
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The measured object. This is the object name of the
|
|
object in the MIB with which the alarm is associated and
|
|
which the configured thresholds are compared with when
|
|
deriving the state of the alarm.
|
|
|
|
It is not neccessary for all alarm measurement values to
|
|
be identified in the MIB since a single alarm may be dependant
|
|
on checks against entities or objects which are not present
|
|
in the MIB and therefore do not have an associated OID.
|
|
|
|
In general where an alarm and its thresholds relate to the
|
|
monitoring of the value of a single MIB object then the OID of
|
|
that object will be defined here otherwise the value
|
|
is set to empty string."
|
|
|
|
::= { sub10UnitMgmtAlarmEntry 5 }
|
|
|
|
|
|
sub10UnitMgmtAlarmMonitorIntvl OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..86400)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The interval in seconds when the measured object is to be read and compared with
|
|
the raise and clear thresholds.
|
|
An alarm cannot be raised or cleared quicker than the configured interval.
|
|
Please also see related sub10UnitMgmtAlarmRaiseIntvls and sub10UnitMgmtAlarmClearIntvls
|
|
objects which also affect when alarms are raised and cleared. This object
|
|
should be set appropriately for the measured object to be monitored (see
|
|
sub10UnitMgmtAlarmRaiseMeasObject) and the resulting alarm to be raised and cleared
|
|
(see sub10UnitMgmtAlarmName). This also affects the forwarding of alarms for example as
|
|
SNMP notifications.
|
|
|
|
Higher severity alarms may have a shorter interval than those at a lower severity.
|
|
The correct setting of sub10UnitMgmtAlarmMonitorIntvl and related objects
|
|
sub10UnitMgmtAlarmRaiseIntvls and sub10UnitMgmtAlarmClearIntvls are important to avoid
|
|
potential network loading caused by alarm storms."
|
|
DEFVAL { 1 }
|
|
|
|
::= { sub10UnitMgmtAlarmEntry 6 }
|
|
|
|
|
|
sub10UnitMgmtAlarmRaiseOper OBJECT-TYPE
|
|
SYNTAX Sub10AlarmOperation
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Type of operation which determines when an alarm
|
|
is to be raised.
|
|
|
|
Definition of each type is as follows:
|
|
|
|
lt - Measured objects value is less than raise threshold
|
|
gt - Measured objects value is greater than raise threshold
|
|
le - Measured objects value is less than or equal to raise threshold
|
|
ge - Measured objects value is greater than or equal to raise threshold
|
|
eq - Measured objects value is equal to raise threshold
|
|
neq - Measured objects value is not equal to raise threshold
|
|
|
|
The alarm operation defines how to apply the configured
|
|
thresholds when raising the alarm. This defines
|
|
whether the alarm is raised when the measured object value
|
|
crosses the threshold from low to high or from high to low or
|
|
if the measured value hits a certain value or not.
|
|
|
|
Example:
|
|
|
|
Alarm Name Alarm Threshold Raise Operation
|
|
High Temperature 70 gt
|
|
Low Temperature -30 le
|
|
|
|
High Temperature Alarm is raised when the measured temperature
|
|
is above 70 and Low Temperature raised when the measured temperature
|
|
is lower than or equal to -30."
|
|
DEFVAL { greaterThanOrEqual }
|
|
|
|
::= { sub10UnitMgmtAlarmEntry 7 }
|
|
|
|
|
|
sub10UnitMgmtAlarmRaiseThresh OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The threshold value which the measured object's value
|
|
crosses causes the alarm to be raised. The behaviour of a
|
|
measured value and alarm threshold comparison is
|
|
defined by the object sub10UnitMgmtAlarmThreshType."
|
|
DEFVAL { "0" }
|
|
|
|
::= { sub10UnitMgmtAlarmEntry 8 }
|
|
|
|
|
|
sub10UnitMgmtAlarmClearOper OBJECT-TYPE
|
|
SYNTAX Sub10AlarmOperation
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Type of operation which determines when an alarm
|
|
is to be cleared.
|
|
|
|
Definition of each type is as follows:
|
|
|
|
lt - Measured objects value is less than clear threshold
|
|
gt - Measured objects value is greater than clear threshold
|
|
le - Measured objects value is less than or equal to clear threshold
|
|
ge - Measured objects value is greater than or equal to clear threshold
|
|
eq - Measured objects value is equal to clear threshold
|
|
neq - Measured objects value is not equal to clear threshold
|
|
|
|
The alarm operation defines how to apply the configured
|
|
thresholds when clearing the alarm. This defines
|
|
whether the alarm is cleared when the measured object value
|
|
crosses the threshold from low to high or from high to low or
|
|
if the measured value hits a certain value or not.
|
|
|
|
Example:
|
|
|
|
Alarm Name Alarm Threshold Clear Operation
|
|
High Temperature 60 le
|
|
Low Temperature -30 gt
|
|
|
|
Low Temperature Alarm is cleared when the measured temperature
|
|
is lower or equal to 60 and Low Temperature cleared when the
|
|
measured temperature is greater than -30."
|
|
DEFVAL { lessThan }
|
|
|
|
::= { sub10UnitMgmtAlarmEntry 9 }
|
|
|
|
|
|
sub10UnitMgmtAlarmClearThresh OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The threshold value which the measured object's value
|
|
crosses causes the alarm to be cleared. The behaviour of a
|
|
measured value and alarm threshold comparison is
|
|
defined by the object sub10UnitMgmtAlarmThreshType.
|
|
|
|
The sub10UnitMgmtAlarmClearThresh value may be different
|
|
to the sub10UnitMgmtAlarmRaiseThresh allowing some hysteresis
|
|
bewteen raising and clearing of alarms thus avoiding an alarm
|
|
being continually raised and cleared if the measured value
|
|
is changing frequently around the threshold.
|
|
If different raise and clear thresholds are not required then the
|
|
sub10UnitMgmtAlarmClearThresh and sub10UnitMgmtAlarmRaiseThresh
|
|
should be set to the same value."
|
|
DEFVAL { "0" }
|
|
|
|
::= { sub10UnitMgmtAlarmEntry 10 }
|
|
|
|
|
|
sub10UnitMgmtAlarmRaiseIntvls OBJECT-TYPE
|
|
SYNTAX Unsigned32(0..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The number of continuous monitoring intervals (see sub10UnitMgmtAlarmMonitorIntvl)
|
|
where the measured object has crossed the raise threshold before the
|
|
alarm state is set to raised. This is intended to reduce the number of
|
|
alarm state transitions when the measured object value
|
|
is rapidly changing close to the configured raise threshold."
|
|
DEFVAL { 1 }
|
|
|
|
::= { sub10UnitMgmtAlarmEntry 11 }
|
|
|
|
|
|
sub10UnitMgmtAlarmClearIntvls OBJECT-TYPE
|
|
SYNTAX Unsigned32(0..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The number of continuous monitoring intervals (see sub10UnitMgmtAlarmMonitorIntvl)
|
|
where the measured object has crossed the clear threshold before the
|
|
alarm state is set to cleared. This is intended to reduce the number
|
|
of alarm state transitions when the measured object value
|
|
is rapidly changing close to the configured clear threshold."
|
|
DEFVAL { 1 }
|
|
|
|
::= { sub10UnitMgmtAlarmEntry 12 }
|
|
|
|
|
|
sub10UnitMgmtAlarmType OBJECT-TYPE
|
|
SYNTAX Sub10AlarmType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The type of the alarm and defines the type of notification (trap) used
|
|
to inform management entities."
|
|
DEFVAL { sub10UnitAlarm }
|
|
|
|
::= { sub10UnitMgmtAlarmEntry 13 }
|
|
|
|
|
|
sub10UnitMgmtAlarmSmtpAddress OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..63))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The smtp mail address. If set the alarm
|
|
is suitable formatted and sent to the given
|
|
mail address."
|
|
|
|
::= { sub10UnitMgmtAlarmEntry 14 }
|
|
|
|
|
|
sub10UnitMgmtAlarmToSyslog OBJECT-TYPE
|
|
SYNTAX Sub10State
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "If set to 'enabled' the alarm is suitably formatted
|
|
and sent to syslog."
|
|
DEFVAL { stateEnabled }
|
|
|
|
::= { sub10UnitMgmtAlarmEntry 15 }
|
|
|
|
|
|
sub10UnitMgmtAlarmEnabled OBJECT-TYPE
|
|
SYNTAX Sub10State
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "If set to 'enabled' the alarm is enabled."
|
|
DEFVAL { stateDisabled }
|
|
|
|
::= { sub10UnitMgmtAlarmEntry 16 }
|
|
|
|
|
|
sub10UnitMgmtAlarmMeasObjectVal OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The value of sub10UnitMgmtAlarmMeasObject formatted as a displayString which when
|
|
measured by the alarm subsystem caused an alarm to be either raised or cleared.
|
|
This is therefore the value of the object which was compared with and found to have
|
|
crossed the configured threshold causing the alarm to change state.
|
|
The value is not the current value of the measured object it is the observed value
|
|
which caused the change in alarm state."
|
|
|
|
::= { sub10UnitMgmtAlarmEntry 17 }
|
|
|
|
|
|
sub10UnitMgmtAlarmToSNMP OBJECT-TYPE
|
|
SYNTAX Sub10State
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "If set to 'enabled' the alarm is forwarded as an SNMP notification / trap."
|
|
DEFVAL { stateDisabled }
|
|
|
|
::= { sub10UnitMgmtAlarmEntry 18 }
|
|
|
|
|
|
sub10UnitMgmtAlarmMeasObjIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32(0..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The measured object's index which is a value from 1 and is the
|
|
instance of the measured object to be monitored. For scalar
|
|
objects this value is 0 and for non-scalar (or column)
|
|
objects this value must be 0 or greater and must match
|
|
the index value defined for the object where the object is
|
|
defined as a column in a table and the table has an index
|
|
defined in a certain range."
|
|
DEFVAL { 0 }
|
|
|
|
::= { sub10UnitMgmtAlarmEntry 19 }
|
|
|
|
|
|
sub10UnitMgmtAlarmsUserDefStart OBJECT-TYPE
|
|
SYNTAX Sub10AlarmIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This defines the row index from which point rows in the sub10UnitMgmtAlarmTable can be
|
|
created and deleted and therefore where user defined alarms start.
|
|
Any attempt to create or delete a row in the sub10UnitMgmtAlarmTable with an index
|
|
below this value will fail."
|
|
DEFVAL { 65 }
|
|
|
|
::= { sub10UnitMgmtAlarms 2 }
|
|
|
|
|
|
-- ****************************************************************************
|
|
-- .sub10UnitMgmt.sub10UnitMgmtSnmp Objects
|
|
-- ****************************************************************************
|
|
|
|
sub10UnitMgmtSnmpAgent OBJECT-TYPE
|
|
SYNTAX Sub10State
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "If set to 'enabled' the agent will respond to valid v1/2c SNMP requests
|
|
for GET/SET/GET-NEXT of supported MIB objects. If this object and the
|
|
object sub10UnitMgmtSnmpv3 are both set to disabled then the unit
|
|
will no longer respond to SNMP requests. If this object is set to
|
|
enabled and sub10UnitMgmtSnmpv3 is set to enabled then the agent will respond
|
|
to both both v1/2c and v3 SNMP requests.
|
|
|
|
!! IMPORTANT !!
|
|
If this object and sub10UnitMgmtSnmpv3 is set to disabled then the Agent
|
|
will no longer respond therefore it will not be possible to re-enable the agent using
|
|
SNMP. The agent can be re-enabled using the web GUI only.
|
|
|
|
If this object is disabled then traps will not be forwarded by the unit."
|
|
DEFVAL { stateDisabled }
|
|
|
|
::= { sub10UnitMgmtSnmp 1 }
|
|
|
|
|
|
sub10UnitMgmtSnmpTraps OBJECT-TYPE
|
|
SYNTAX Sub10State
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "If set to 'enabled' the agent will forward traps to all configured
|
|
trap destinations. If disabled traps are discarded.
|
|
Traps are not sent if sub10UnitMgmtSnmpAgent is 'disabled(2)'
|
|
regardless of the setting of this object."
|
|
DEFVAL { stateDisabled }
|
|
|
|
::= { sub10UnitMgmtSnmp 2 }
|
|
|
|
|
|
sub10UnitMgmtSnmpv320Mib OBJECT-TYPE
|
|
SYNTAX Sub10State
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "If set to 'enabled' the agent will support the Sub10 Systems
|
|
v320 legacy MIB (LIBERATOR-MIB) objects and traps."
|
|
DEFVAL { stateDisabled }
|
|
|
|
::= { sub10UnitMgmtSnmp 3 }
|
|
|
|
|
|
sub10UnitMgmtSnmpv3 OBJECT-TYPE
|
|
SYNTAX Sub10State
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "If set to 'enabled' the agent will support SNMPv3
|
|
PDUs and the SNMPv3 MIB configuration. This can be set to enabled or
|
|
disabled independently of the object sub10UnitMgmtSnmpAgent which
|
|
enables or disables the v1/2c agent.
|
|
|
|
IMPORTANT: This object is controlled by transaction management.
|
|
Any changes to this object must be transactionally acknowledged
|
|
following a successful set thus protecting against loss of
|
|
communication with the unit. To acknowledge the transaction
|
|
set the object sub10UnitMgmtTransaction to transactionCommit(2)."
|
|
DEFVAL { stateDisabled }
|
|
|
|
::= { sub10UnitMgmtSnmp 4 }
|
|
|
|
|
|
sub10UnitMgmtSnmpTrpDstTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Sub10UnitMgmtSnmpTrpDstEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The table listing the each trap destination the local unit.
|
|
Each trap destination has an IpAddress and a trap community string"
|
|
|
|
::= { sub10UnitMgmtSnmp 5 }
|
|
|
|
|
|
sub10UnitMgmtSnmpTrpDstEntry OBJECT-TYPE
|
|
SYNTAX Sub10UnitMgmtSnmpTrpDstEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry (row) in the sub10UnitMgmtSnmpTrpDstTable.
|
|
If the rowStatus is set to notInService(2) then the entry
|
|
is not valid and no columnar objects are returned."
|
|
INDEX { sub10UnitMgmtSnmpTrpDstIndex }
|
|
|
|
::= { sub10UnitMgmtSnmpTrpDstTable 1 }
|
|
|
|
Sub10UnitMgmtSnmpTrpDstEntry ::= SEQUENCE {
|
|
sub10UnitMgmtSnmpTrpDstIndex Unsigned32,
|
|
sub10UnitMgmtSnmpTrpDstRowStatus RowStatus,
|
|
sub10UnitMgmtSnmpTrpDstIpAddr OCTET STRING,
|
|
sub10UnitMgmtSnmpTrpDstCommunity OCTET STRING
|
|
}
|
|
|
|
sub10UnitMgmtSnmpTrpDstIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..3)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The sub10UnitMgmtSnmpTrpDstTable index.
|
|
If the rowStatus is not set to enabled(1) then
|
|
the entry is not valid and no columnar objects are returned
|
|
except for the rowStatus object itself."
|
|
|
|
::= { sub10UnitMgmtSnmpTrpDstEntry 1 }
|
|
|
|
|
|
sub10UnitMgmtSnmpTrpDstRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The row status of this row.
|
|
All table rows are fixed in size
|
|
and as such do not require conceptual row
|
|
creation. Instead the RowStatus is set to
|
|
active(1) or notInService(2) which indicates
|
|
that the row is operationally in use or not.
|
|
The default value is notInService(2) meaning the
|
|
entry is not used by default. To make
|
|
the entry valid this object must be set
|
|
to enabled(1), createAndGo(4) or createAndWait(5).
|
|
To delete the row set this to destroy(6)."
|
|
DEFVAL { notInService }
|
|
|
|
::= { sub10UnitMgmtSnmpTrpDstEntry 2 }
|
|
|
|
|
|
sub10UnitMgmtSnmpTrpDstIpAddr OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..15))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The administratively assigned SNMP Trap Destination IP."
|
|
|
|
::= { sub10UnitMgmtSnmpTrpDstEntry 3 }
|
|
|
|
|
|
sub10UnitMgmtSnmpTrpDstCommunity OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The trap community name sent with each trap to this trap destination.
|
|
The trap community allows for some security in the target management terminal"
|
|
|
|
::= { sub10UnitMgmtSnmpTrpDstEntry 4 }
|
|
|
|
|
|
sub10UnitMgmtSnmpEngineIdFormat OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
v4IpAddress(1),
|
|
v6IpAddress(2),
|
|
macAddress(3),
|
|
textString(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The format of this SNMP v3 agent's engine id. The engine id is administratively
|
|
defined and is between 5 and 32 characters long and can be based on a number
|
|
of formats defined here."
|
|
DEFVAL { textString }
|
|
|
|
::= { sub10UnitMgmtSnmp 6 }
|
|
|
|
|
|
sub10UnitMgmtSnmpEngineIdText OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..25))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "When sub10UnitMgmtSnmpEngineIdFormat='textString(4)' this object contains the administratively defined
|
|
string used to build the SNMP v3 engine id in sub10UnitMgmtSnmpEngineId."
|
|
DEFVAL { "Sub10Systems" }
|
|
|
|
::= { sub10UnitMgmtSnmp 7 }
|
|
|
|
|
|
sub10UnitMgmtSnmpEngineId OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (5..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The administratively assigned SNMP v3 engine id. The construction of the
|
|
engine id is dependant on the setting of sub10UnitMgmtSnmpEngineIdFormat and
|
|
must be unique to the unit."
|
|
|
|
::= { sub10UnitMgmtSnmp 8 }
|
|
|
|
|
|
sub10UnitMgmtSnmpOperAuthProto OBJECT-TYPE
|
|
SYNTAX Sub10Snmpv3AuthProtocol
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The authentication protocol currently assigned to users of group type operation."
|
|
DEFVAL { noAuth }
|
|
|
|
::= { sub10UnitMgmtSnmp 9 }
|
|
|
|
|
|
sub10UnitMgmtSnmpOperPrivProto OBJECT-TYPE
|
|
SYNTAX Sub10Snmpv3PrivProtocol
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The privacy protocol currently assigned to users of group type operation."
|
|
DEFVAL { noPriv }
|
|
|
|
::= { sub10UnitMgmtSnmp 10 }
|
|
|
|
|
|
sub10UnitMgmtSnmpAdminAuthProto OBJECT-TYPE
|
|
SYNTAX Sub10Snmpv3AuthProtocol
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The authentication protocol currently assigned to users of group type administration."
|
|
DEFVAL { md5 }
|
|
|
|
::= { sub10UnitMgmtSnmp 11 }
|
|
|
|
|
|
sub10UnitMgmtSnmpAdminPrivProto OBJECT-TYPE
|
|
SYNTAX Sub10Snmpv3PrivProtocol
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The privacy protocol currently assigned to users of group type administration."
|
|
DEFVAL { noPriv }
|
|
|
|
::= { sub10UnitMgmtSnmp 12 }
|
|
|
|
|
|
sub10UnitMgmtSnmpMaintAuthProto OBJECT-TYPE
|
|
SYNTAX Sub10Snmpv3AuthProtocol
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The authentication protocol currently assigned to users of group type maintenance."
|
|
DEFVAL { md5 }
|
|
|
|
::= { sub10UnitMgmtSnmp 13 }
|
|
|
|
|
|
sub10UnitMgmtSnmpMaintPrivProto OBJECT-TYPE
|
|
SYNTAX Sub10Snmpv3PrivProtocol
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The privacy protocol currently assigned to users of group type maintenance."
|
|
DEFVAL { des }
|
|
|
|
::= { sub10UnitMgmtSnmp 14 }
|
|
|
|
|
|
sub10UnitMgmtSnmpUserTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Sub10UnitMgmtSnmpUserEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The table of SNMPv3 User configuration."
|
|
|
|
::= { sub10UnitMgmtSnmp 15 }
|
|
|
|
|
|
sub10UnitMgmtSnmpUserEntry OBJECT-TYPE
|
|
SYNTAX Sub10UnitMgmtSnmpUserEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry (row) in the sub10UnitMgmtSnmpUserTable.
|
|
If the rowStatus is set to notInService(2) then the entry
|
|
is not valid and no columnar objects are returned."
|
|
INDEX { sub10UnitMgmtSnmpUserIndex }
|
|
|
|
::= { sub10UnitMgmtSnmpUserTable 1 }
|
|
|
|
Sub10UnitMgmtSnmpUserEntry ::= SEQUENCE {
|
|
sub10UnitMgmtSnmpUserIndex Unsigned32,
|
|
sub10UnitMgmtSnmpUserRowStatus RowStatus,
|
|
sub10UnitMgmtSnmpUserName OCTET STRING,
|
|
sub10UnitMgmtSnmpUserGroup Sub10UserGroup,
|
|
sub10UnitMgmtSnmpUserAuthPwd OCTET STRING,
|
|
sub10UnitMgmtSnmpUserAuthPwdChk OCTET STRING,
|
|
sub10UnitMgmtSnmpUserPrivPwd OCTET STRING,
|
|
sub10UnitMgmtSnmpUserPrivPwdChk OCTET STRING
|
|
}
|
|
|
|
sub10UnitMgmtSnmpUserIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..10)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The sub10UnitMgmtSnmpUserTable index.
|
|
If the rowStatus is not set to enabled(1) then
|
|
the entry is not valid and no columnar objects are returned
|
|
except for the rowStatus object itself."
|
|
|
|
::= { sub10UnitMgmtSnmpUserEntry 1 }
|
|
|
|
|
|
sub10UnitMgmtSnmpUserRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The row status of this row.
|
|
All table rows are fixed in size
|
|
and as such do not require conceptual row
|
|
creation. Instead the RowStatus is set to
|
|
active(1) or notInService(2) which indicates
|
|
that the row is operationally in use or not.
|
|
The default value is notInService(2) meaning the
|
|
entry is not used by default. To make
|
|
the entry valid this object must be set
|
|
to enabled(1), createAndGo(4) or createAndWait(5).
|
|
To delete the row set this to destroy(6)."
|
|
DEFVAL { notInService }
|
|
|
|
::= { sub10UnitMgmtSnmpUserEntry 2 }
|
|
|
|
|
|
sub10UnitMgmtSnmpUserName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The administratively assigned SNMPv3 User name."
|
|
|
|
::= { sub10UnitMgmtSnmpUserEntry 3 }
|
|
|
|
|
|
sub10UnitMgmtSnmpUserGroup OBJECT-TYPE
|
|
SYNTAX Sub10UserGroup
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The user group type. Authentication and Privacy policies are assigned to a
|
|
user group and not individual users."
|
|
DEFVAL { operation }
|
|
|
|
::= { sub10UnitMgmtSnmpUserEntry 4 }
|
|
|
|
|
|
sub10UnitMgmtSnmpUserAuthPwd OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (6..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The unique SNMPv3 authentication protocol password provided by the system administrator.
|
|
This object can be set but is not visible when read."
|
|
|
|
::= { sub10UnitMgmtSnmpUserEntry 5 }
|
|
|
|
|
|
sub10UnitMgmtSnmpUserAuthPwdChk OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (6..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The unique SNMPv3 authentication protocol password provided by the system administrator
|
|
used to verify the setting of sub10UnitMgmtSnmpUserAuthPassword.
|
|
This object can be set but is not visible when read."
|
|
|
|
::= { sub10UnitMgmtSnmpUserEntry 6 }
|
|
|
|
|
|
sub10UnitMgmtSnmpUserPrivPwd OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (6..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The unique SNMPv3 privacy protocol password provided by the system administrator.
|
|
This object can be set but is not visible when read."
|
|
|
|
::= { sub10UnitMgmtSnmpUserEntry 7 }
|
|
|
|
|
|
sub10UnitMgmtSnmpUserPrivPwdChk OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (6..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The unique SNMPv3 privacy protocol password provided by the system administrator
|
|
used to verify the setting of sub10UnitMgmtSnmpUserPrivPassword.
|
|
This object can be set but is not visible when read."
|
|
|
|
::= { sub10UnitMgmtSnmpUserEntry 8 }
|
|
|
|
|
|
sub10UnitMgmtSnmpAccessTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Sub10UnitMgmtSnmpAccessEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The table of SNMPv3 Access configuration."
|
|
|
|
::= { sub10UnitMgmtSnmp 16 }
|
|
|
|
|
|
sub10UnitMgmtSnmpAccessEntry OBJECT-TYPE
|
|
SYNTAX Sub10UnitMgmtSnmpAccessEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry (row) in the sub10UnitMgmtSnmpAccessTable.
|
|
If the rowStatus is set to notInService(2) then the entry
|
|
is not valid and no columnar objects are returned."
|
|
INDEX { sub10UnitMgmtSnmpAccessIndex }
|
|
|
|
::= { sub10UnitMgmtSnmpAccessTable 1 }
|
|
|
|
Sub10UnitMgmtSnmpAccessEntry ::= SEQUENCE {
|
|
sub10UnitMgmtSnmpAccessIndex Unsigned32,
|
|
sub10UnitMgmtSnmpAccessRowStatus RowStatus,
|
|
sub10UnitMgmtSnmpAccessName OCTET STRING,
|
|
sub10UnitMgmtSnmpAccessIpAddr OCTET STRING
|
|
}
|
|
|
|
sub10UnitMgmtSnmpAccessIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..3)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The sub10UnitMgmtSnmpAccessTable index.
|
|
If the rowStatus is not set to enabled(1) then
|
|
the entry is not valid and no columnar objects are returned
|
|
except for the rowStatus object itself."
|
|
|
|
::= { sub10UnitMgmtSnmpAccessEntry 1 }
|
|
|
|
|
|
sub10UnitMgmtSnmpAccessRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The row status of this row.
|
|
All table rows are fixed in size
|
|
and as such do not require conceptual row
|
|
creation. Instead the RowStatus is set to
|
|
active(1) or notInService(2) which indicates
|
|
that the row is operationally in use or not.
|
|
The default value is notInService(2) meaning the
|
|
entry is not used by default. To make
|
|
the entry valid this object must be set
|
|
to enabled(1), createAndGo(4) or createAndWait(5).
|
|
To delete the row set this to destroy(6)."
|
|
DEFVAL { notInService }
|
|
|
|
::= { sub10UnitMgmtSnmpAccessEntry 2 }
|
|
|
|
|
|
sub10UnitMgmtSnmpAccessName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The administratively assigned SNMPv3 access name. This is used as an alias for the
|
|
access address for purposes of identification. The name is not used in the SNMP protocol."
|
|
|
|
::= { sub10UnitMgmtSnmpAccessEntry 3 }
|
|
|
|
|
|
sub10UnitMgmtSnmpAccessIpAddr OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..15))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The administratively assigned SNMP access IP address. Only SNMP requests from this
|
|
address will be serviced by the SNMP agent."
|
|
|
|
::= { sub10UnitMgmtSnmpAccessEntry 4 }
|
|
|
|
|
|
sub10UnitMgmtSnmpTargetTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Sub10UnitMgmtSnmpTargetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The table of SNMPv3 Target configuration.
|
|
This table defines the addresses of target SNMPv3 managers to send
|
|
Notifications."
|
|
|
|
::= { sub10UnitMgmtSnmp 17 }
|
|
|
|
|
|
sub10UnitMgmtSnmpTargetEntry OBJECT-TYPE
|
|
SYNTAX Sub10UnitMgmtSnmpTargetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry (row) in the sub10UnitMgmtSnmpTargetTable.
|
|
If the rowStatus is set to notInService(2) then the entry
|
|
is not valid and no columnar objects are returned."
|
|
INDEX { sub10UnitMgmtSnmpTargetIndex }
|
|
|
|
::= { sub10UnitMgmtSnmpTargetTable 1 }
|
|
|
|
Sub10UnitMgmtSnmpTargetEntry ::= SEQUENCE {
|
|
sub10UnitMgmtSnmpTargetIndex Unsigned32,
|
|
sub10UnitMgmtSnmpTargetRowStatus RowStatus,
|
|
sub10UnitMgmtSnmpTargetName OCTET STRING,
|
|
sub10UnitMgmtSnmpTargetIpAddr OCTET STRING,
|
|
sub10UnitMgmtSnmpTargetUserName OCTET STRING
|
|
}
|
|
|
|
sub10UnitMgmtSnmpTargetIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..3)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The sub10UnitMgmtSnmpTargetTable index.
|
|
If the rowStatus is not set to enabled(1) then
|
|
the entry is not valid and no columnar objects are returned
|
|
except for the rowStatus object itself."
|
|
|
|
::= { sub10UnitMgmtSnmpTargetEntry 1 }
|
|
|
|
|
|
sub10UnitMgmtSnmpTargetRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The row status of this row.
|
|
All table rows are fixed in size
|
|
and as such do not require conceptual row
|
|
creation. Instead the RowStatus is set to
|
|
active(1) or notInService(2) which indicates
|
|
that the row is operationally in use or not.
|
|
The default value is notInService(2) meaning the
|
|
entry is not used by default. To make
|
|
the entry valid this object must be set
|
|
to enabled(1), createAndGo(4) or createAndWait(5).
|
|
To delete the row set this to destroy(6)."
|
|
DEFVAL { notInService }
|
|
|
|
::= { sub10UnitMgmtSnmpTargetEntry 2 }
|
|
|
|
|
|
sub10UnitMgmtSnmpTargetName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The administratively assigned SNMPv3 target name."
|
|
|
|
::= { sub10UnitMgmtSnmpTargetEntry 3 }
|
|
|
|
|
|
sub10UnitMgmtSnmpTargetIpAddr OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..15))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The administratively assigned SNMP target IP address. When enabled SNMPv3 Notifications
|
|
are sent to this address."
|
|
|
|
::= { sub10UnitMgmtSnmpTargetEntry 4 }
|
|
|
|
|
|
sub10UnitMgmtSnmpTargetUserName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The administratively assigned SNMPv3 target user name.
|
|
The security model configured for this user is used when sending
|
|
notifications to the target address."
|
|
|
|
::= { sub10UnitMgmtSnmpTargetEntry 5 }
|
|
|
|
|
|
-- ****************************************************************************
|
|
-- .sub10UnitMgmt.sub10UnitMgmtFirmware Objects
|
|
-- ****************************************************************************
|
|
|
|
sub10UnitMgmtFirmwareSelectBank OBJECT-TYPE
|
|
SYNTAX Sub10FirmwareBank
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Currently selected bank which unit uses to boot."
|
|
|
|
::= { sub10UnitMgmtFirmware 1 }
|
|
|
|
|
|
sub10UnitMgmtFirmwareLoadedBank OBJECT-TYPE
|
|
SYNTAX Sub10FirmwareBank
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Currently loaded bank. The firmware version number running in this bank is
|
|
defined by sub10UnitMgmtFirmwareVersion."
|
|
|
|
::= { sub10UnitMgmtFirmware 2 }
|
|
|
|
|
|
sub10UnitMgmtFirmwareVersion OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..15))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The firmware version currently running on the local unit.
|
|
This is the version of the firmware loaded into the bank
|
|
number defined in sub10UnitMgmtFirmwareLoadedBank."
|
|
|
|
::= { sub10UnitMgmtFirmware 3 }
|
|
|
|
|
|
sub10UnitMgmtFirmwareBootVersion OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..15))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The firmware boot version currently running on the local unit.
|
|
This is the boot version of the firmware loaded into the bank
|
|
number defined in sub10UnitMgmtFirmwareLoadedBank."
|
|
|
|
::= { sub10UnitMgmtFirmware 4 }
|
|
|
|
|
|
sub10UnitMgmtFirmwareAction OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
fmwNone(1),
|
|
fmwReboot(2),
|
|
fmwCopyInactiveBank(3),
|
|
fmwUploadInactiveBank(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The firmware bank action object is used to perform certain
|
|
actions on a firmware bank. Using this it is possible to reboot the
|
|
unit, copy banks and upload software to the currently inactive bank.
|
|
|
|
After a Set of this object it's value is always reset to fmwNone(1).
|
|
|
|
The progress of the action may be monitored using a get of the objects
|
|
'sub10UnitMgmtFirmwareActStatus' and 'sub10UnitMgmtFirmwareActProgress'.
|
|
|
|
fmwNone(1) -
|
|
Perform no firmware action unit.
|
|
|
|
fmwReboot(2) -
|
|
Perform immediate unit reboot of the unit and start the
|
|
firmware currently loaded in 'sub10UnitMgmtFirmwareSelectBank'.
|
|
|
|
fmwCopyInactiveBank(3) -
|
|
Copy the firmware currently loaded in 'sub10UnitMgmtFirmwareLoadedBank'
|
|
to the inactive bank.
|
|
|
|
fmwUploadInactiveBank(4) -
|
|
Upload the firmware image named by 'sub10UnitMgmtFirmwareUplImage' from the
|
|
server address 'sub10UnitFirmwareUplServerIp' and load
|
|
to the inactive bank."
|
|
|
|
::= { sub10UnitMgmtFirmware 5 }
|
|
|
|
|
|
sub10UnitMgmtFirmwareBankTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Sub10UnitMgmtFirmwareBankEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This tables contains information regarding the firmware banks."
|
|
|
|
::= { sub10UnitMgmtFirmware 6 }
|
|
|
|
|
|
sub10UnitMgmtFirmwareBankEntry OBJECT-TYPE
|
|
SYNTAX Sub10UnitMgmtFirmwareBankEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry (row) in the sub10UnitMgmtFirmwareBankTable."
|
|
INDEX { sub10UnitMgmtFirmwareBankIndex }
|
|
|
|
::= { sub10UnitMgmtFirmwareBankTable 1 }
|
|
|
|
Sub10UnitMgmtFirmwareBankEntry ::= SEQUENCE {
|
|
sub10UnitMgmtFirmwareBankIndex Sub10FirmwareBank,
|
|
sub10UnitMgmtFirmwareBankVersion OCTET STRING,
|
|
sub10UnitMgmtFirmwareBankImage OCTET STRING
|
|
}
|
|
|
|
sub10UnitMgmtFirmwareBankIndex OBJECT-TYPE
|
|
SYNTAX Sub10FirmwareBank
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The sub10UnitMgmtFirmwareBankTable index."
|
|
|
|
::= { sub10UnitMgmtFirmwareBankEntry 1 }
|
|
|
|
|
|
sub10UnitMgmtFirmwareBankVersion OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..15))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The firmware version currently installed in this bank."
|
|
|
|
::= { sub10UnitMgmtFirmwareBankEntry 2 }
|
|
|
|
|
|
sub10UnitMgmtFirmwareBankImage OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..64))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The firmware image name currently installed in this bank."
|
|
|
|
::= { sub10UnitMgmtFirmwareBankEntry 3 }
|
|
|
|
|
|
sub10UnitMgmtFirmwareUplImage OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..64))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The firmware image name to be uploaded from the server
|
|
defined by 'sub10UnitFirmwareUplServerIp' using the firmware action
|
|
'sub10UnitFirmwareAction=fmwUpload(4)'."
|
|
|
|
::= { sub10UnitMgmtFirmware 7 }
|
|
|
|
|
|
sub10UnitMgmtFirmwareUplSvrIp OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (7..15))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The IP address of the server used to upload the firmware image
|
|
defined by sub10UnitMgmtFirmwareUplImage."
|
|
|
|
::= { sub10UnitMgmtFirmware 8 }
|
|
|
|
|
|
sub10UnitMgmtFirmwareFromBank OBJECT-TYPE
|
|
SYNTAX Sub10FirmwareBank
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The bank currently being copied from by the Firmware action sub10UnitMgmtFirmwareAction = fmwCopyInactiveBank(4)."
|
|
|
|
::= { sub10UnitMgmtFirmware 9 }
|
|
|
|
|
|
sub10UnitMgmtFirmwareToBank OBJECT-TYPE
|
|
SYNTAX Sub10FirmwareBank
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The bank currently being uploaded or copied to by the Firmware actions sub10UnitMgmtFirmwareAction = fmwUploadInactiveBank(4)
|
|
or sub10UnitMgmtFirmwareAction = fmwCopyInactiveBank(4)."
|
|
|
|
::= { sub10UnitMgmtFirmware 10 }
|
|
|
|
|
|
sub10UnitMgmtFirmwareActStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
fmwUploadSuccess(1),
|
|
fmwUploadFailed(2),
|
|
fmwUploadTimeout(3),
|
|
fmwUploadFileNotFound(4),
|
|
fmwUploadInvalid(5),
|
|
fmwUploadingImage(6),
|
|
fmwUploadingImageComplete(7),
|
|
fmwUploadWritingBank(8),
|
|
fmwUploadWritingBankComplete(9),
|
|
fmwValidatingImage(10),
|
|
fmwImageValidateSuccess(11),
|
|
fmwImageValidateFailed(12),
|
|
fmwCopyingBank(13),
|
|
fmwCopyingBankComplete(14),
|
|
fmwCopyBankFailed(15),
|
|
fmwCopyBankSuccess(16)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The status of the firmware bank action which
|
|
can be repeatedly read using a Get to report the progress of the
|
|
the action and verify that it has either succeeded or failed. The
|
|
value is left in the final state after the Firmware Action has completed."
|
|
|
|
::= { sub10UnitMgmtFirmware 11 }
|
|
|
|
|
|
sub10UnitMgmtFirmwareActProgress OBJECT-TYPE
|
|
SYNTAX Integer32(0..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The % progress of firmware action when loading the firmware image
|
|
to a firmware bank or copying a firmware image from on1 bank to another bank."
|
|
DEFVAL { 0 }
|
|
|
|
::= { sub10UnitMgmtFirmware 12 }
|
|
|
|
|
|
-- ****************************************************************************
|
|
-- .sub10UnitMgmt.sub10UnitMgmtDNS Objects
|
|
-- ****************************************************************************
|
|
|
|
sub10UnitMgmtDNSTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Sub10UnitMgmtDNSEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This tables defines the Domain Name Servers."
|
|
|
|
::= { sub10UnitMgmtDNS 1 }
|
|
|
|
|
|
sub10UnitMgmtDNSEntry OBJECT-TYPE
|
|
SYNTAX Sub10UnitMgmtDNSEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry (row) in the sub10UnitMgmtDNSTable."
|
|
INDEX { sub10UnitMgmtDNSIndex }
|
|
|
|
::= { sub10UnitMgmtDNSTable 1 }
|
|
|
|
Sub10UnitMgmtDNSEntry ::= SEQUENCE {
|
|
sub10UnitMgmtDNSIndex Unsigned32,
|
|
sub10UnitMgmtDNServer OCTET STRING
|
|
}
|
|
|
|
sub10UnitMgmtDNSIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..2)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The sub10UnitMgmtDNSTable index."
|
|
|
|
::= { sub10UnitMgmtDNSEntry 1 }
|
|
|
|
|
|
sub10UnitMgmtDNServer OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (7..15))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The administratively assigned DNS server IP for the unit.
|
|
IMPORTANT: This object is controlled by transaction management.
|
|
Any changes to this object must be transactionally acknowledged
|
|
following a successful set thus protecting against loss of
|
|
communication with the unit. To acknowledge the transaction
|
|
set the object sub10UnitMgmtTransaction to transactionCommit(2)."
|
|
|
|
::= { sub10UnitMgmtDNSEntry 2 }
|
|
|
|
|
|
-- ****************************************************************************
|
|
-- .sub10UnitMgmt.sub10UnitMgmtEncryption Objects
|
|
-- ****************************************************************************
|
|
|
|
sub10UnitMgmtEncryptMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
encryptNone(0),
|
|
encryptAES128(1),
|
|
encryptAES192(2),
|
|
encryptAES256(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The administratively assigned License key for the unit.
|
|
The license key enables capabilities within the unit.
|
|
The capabilities currently available by the configured
|
|
license key are readable objects."
|
|
|
|
::= { sub10UnitMgmtEncryption 1 }
|
|
|
|
|
|
sub10UnitMgmtEncryptKey OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The administratively assigned Encryption key."
|
|
|
|
::= { sub10UnitMgmtEncryption 2 }
|
|
|
|
|
|
-- ****************************************************************************
|
|
-- .sub10UnitMgmt.sub10UnitMgmtLicense Objects
|
|
-- ****************************************************************************
|
|
|
|
sub10UnitMgmtLicenseKey OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The administratively assigned License key for the unit.
|
|
The license key enables capabilities within the unit.
|
|
The capabilities currently available by the configured
|
|
license key are readable objects."
|
|
|
|
::= { sub10UnitMgmtLicense 1 }
|
|
|
|
|
|
sub10UnitMgmtLicenseAES OBJECT-TYPE
|
|
SYNTAX Sub10State
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indication if AES encryption is included in the current license key."
|
|
DEFVAL { stateDisabled }
|
|
|
|
::= { sub10UnitMgmtLicense 2 }
|
|
|
|
|
|
-- ****************************************************************************
|
|
-- .sub10UnitMgmt.sub10UnitMgmtSyncE Objects
|
|
-- ****************************************************************************
|
|
|
|
sub10UnitMgmtSyncEMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
syncENone(0),
|
|
syncEProvider(1),
|
|
syncEConsumer(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The SyncE Mode. Setting this to syncEProvider(1) configures the unit as
|
|
a Slave clock. In this case the unit at the other end of the
|
|
link should be set to syncEConsumer(2).
|
|
|
|
IMPORTANT: This object is controlled by transaction management.
|
|
Any changes to this object must be transactionally acknowledged
|
|
following a successful set thus protecting against loss of
|
|
communication with the unit. To acknowledge the transaction
|
|
set the object sub10UnitMgmtTransaction to transactionCommit(2)."
|
|
|
|
::= { sub10UnitMgmtSyncE 1 }
|
|
|
|
|
|
-- ****************************************************************************
|
|
-- .sub10UnitMgmt.sub10UnitMgmtActions Objects
|
|
-- ****************************************************************************
|
|
|
|
sub10UnitMgmtTransaction OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
transactionNone(1),
|
|
transactionCommit(2),
|
|
transactionRollback(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This is used to commit or rollback the setting of object configuration.
|
|
It only applies where the objects are subject to transactional requirements.
|
|
For example the setting of the Unit's IP Address requires that a transaction
|
|
be committed. If the transaction is not committed after a rollback timeout then
|
|
the unit will automatically action a rollback to the previous value.
|
|
|
|
The rollback timeout is configurable 'sub10UnitMgmtRollbackTimeout'"
|
|
|
|
::= { sub10UnitMgmtActions 1 }
|
|
|
|
|
|
sub10UnitMgmtTransactionStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
transStatusNone(1),
|
|
transStatusActive(2),
|
|
transStatusCommitted(3),
|
|
transStatusRollback(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This indicates either a transaction is currently in progress or
|
|
if the last transaction was committed successfully or was rolled
|
|
back."
|
|
|
|
::= { sub10UnitMgmtActions 2 }
|
|
|
|
|
|
sub10UnitMgmtRollbackTimeout OBJECT-TYPE
|
|
SYNTAX Unsigned32(30..300)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The timeout in seconds after which uncommitted Sets
|
|
will be rolled back to their previous values.
|
|
A rollback only affects those objects which are
|
|
subject to transactions."
|
|
DEFVAL { 180 }
|
|
|
|
::= { sub10UnitMgmtActions 3 }
|
|
|
|
|
|
sub10UnitMgmtTransactionMode OBJECT-TYPE
|
|
SYNTAX Sub10State
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enables and Disables transactions. If sub10UnitMgmTransactionMode is
|
|
stateDisabled(0) then no objects are subject to commit and rollback."
|
|
DEFVAL { stateEnabled }
|
|
|
|
::= { sub10UnitMgmtActions 4 }
|
|
|
|
|
|
sub10UnitMgmtResetAction OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
resetNone(1),
|
|
resetFactoryDefaults(2),
|
|
resetFactoryDefaultsNoSave(3),
|
|
resetStatistics(4),
|
|
resetAlarmConfig(5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This is used to reset unit configuration and stats.
|
|
resetFactoryDefaults(2)
|
|
- Resets all configuration to Factory Defaults, requires a reboot.
|
|
|
|
resetStatistics(3)
|
|
- Resets according to setting of sub10UnitMgmtResetStatsGroup
|
|
For reset of all stats sub10UnitMgmtResetStatsGroup = 'statsGroupAll'.
|
|
|
|
resetAlarmConfig(4)
|
|
- Resets according to setting of sub10UnitMgmtResetAlarmsType
|
|
For reset of all alarms sub10UnitMgmtResetAlarmsType = 'resetAlarmTypeAll'."
|
|
|
|
::= { sub10UnitMgmtActions 5 }
|
|
|
|
|
|
sub10UnitMgmtResetStatsGroup OBJECT-TYPE
|
|
SYNTAX Sub10StatsGroup
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This is used to reset specific statistics when set prior to submitting
|
|
sub10UnitMgmtResetAction = resetStatistics(4).
|
|
|
|
For reset of all stats sub10UnitMgmtResetStatsGroup = 'statsGroupAll'."
|
|
|
|
::= { sub10UnitMgmtActions 6 }
|
|
|
|
|
|
sub10UnitMgmtResetAlarmsType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
resetAlarmTypeAll(1),
|
|
resetAlarmTypeFixed(2),
|
|
resetAlarmTypeUser(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This is used to reset specific alarm configuration when set prior to submitting
|
|
sub10UnitMgmtResetAction = resetAlarmConfig(5).
|
|
|
|
For reset of all alarms sub10UnitMgmtResetAlarmsType = resetAlarmTypeAll(1)."
|
|
|
|
::= { sub10UnitMgmtActions 7 }
|
|
|
|
|
|
-- ****************************************************************************
|
|
-- .sub10EthernetStatus.sub10EthernetLocalStatus Objects
|
|
-- ****************************************************************************
|
|
|
|
sub10EthLclStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Sub10EthLclStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table defines the local status objects of the ethernet interface."
|
|
|
|
::= { sub10EthernetLocalStatus 1 }
|
|
|
|
|
|
sub10EthLclStatusEntry OBJECT-TYPE
|
|
SYNTAX Sub10EthLclStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry (row) in the sub10EthLclStatusTable."
|
|
INDEX { sub10EthIfIndex }
|
|
|
|
::= { sub10EthLclStatusTable 1 }
|
|
|
|
Sub10EthLclStatusEntry ::= SEQUENCE {
|
|
sub10EthLclLinkStatus Sub10OperStatus,
|
|
sub10EthLclMacAddress Sub10MacAddress,
|
|
sub10EthLclSpeed Unsigned32,
|
|
sub10EthLclDuplex Sub10Duplex,
|
|
sub10EthLclMDI Sub10MDIType,
|
|
sub10EthIfIndex Sub10EthInterfaceIndex
|
|
}
|
|
|
|
sub10EthLclLinkStatus OBJECT-TYPE
|
|
SYNTAX Sub10OperStatus
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The status of the ethernet link. Synonymous with interfaces OperState"
|
|
|
|
::= { sub10EthLclStatusEntry 1 }
|
|
|
|
|
|
sub10EthLclMacAddress OBJECT-TYPE
|
|
SYNTAX Sub10MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The MAC address of the local ethernet interface. Synonymous with interfaces ifPhysAddress"
|
|
|
|
::= { sub10EthLclStatusEntry 2 }
|
|
|
|
|
|
sub10EthLclSpeed OBJECT-TYPE
|
|
SYNTAX Unsigned32(0..4294967295)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The estimated speed of the local ethernet interface in bits per second. Synonymous with interfaces ifSpeed"
|
|
|
|
::= { sub10EthLclStatusEntry 3 }
|
|
|
|
|
|
sub10EthLclDuplex OBJECT-TYPE
|
|
SYNTAX Sub10Duplex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The duplex operation of the local ethernet interface"
|
|
|
|
::= { sub10EthLclStatusEntry 4 }
|
|
|
|
|
|
sub10EthLclMDI OBJECT-TYPE
|
|
SYNTAX Sub10MDIType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The MDI/MDIX state of the local ethernet interface"
|
|
|
|
::= { sub10EthLclStatusEntry 5 }
|
|
|
|
|
|
sub10EthIfIndex OBJECT-TYPE
|
|
SYNTAX Sub10EthInterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A unique value, greater than zero, for each ethernet interface. It
|
|
is recommended that values are assigned contiguously
|
|
starting from 1. This is used as an index to the ethernet based
|
|
enterprise MIB tables and will reflect the number of physical
|
|
ethernet ports."
|
|
|
|
::= { sub10EthLclStatusEntry 6 }
|
|
|
|
|
|
-- ****************************************************************************
|
|
-- .sub10EthernetStatus.sub10EthernetRemoteStatus Objects
|
|
-- ****************************************************************************
|
|
|
|
sub10EthRmtStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Sub10EthRmtStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table defines the remote status objects of the ethernet interface."
|
|
|
|
::= { sub10EthernetRemoteStatus 1 }
|
|
|
|
|
|
sub10EthRmtStatusEntry OBJECT-TYPE
|
|
SYNTAX Sub10EthRmtStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry (row) in the sub10EthRmtStatusTable."
|
|
INDEX { sub10EthIfIndex }
|
|
|
|
::= { sub10EthRmtStatusTable 1 }
|
|
|
|
Sub10EthRmtStatusEntry ::= SEQUENCE {
|
|
sub10EthRmtLinkStatus Sub10OperStatus,
|
|
sub10EthRmtMacAddress Sub10MacAddress,
|
|
sub10EthRmtSpeed Unsigned32,
|
|
sub10EthRmtDuplex Sub10Duplex,
|
|
sub10EthRmtMDI Sub10MDIType
|
|
}
|
|
|
|
sub10EthRmtLinkStatus OBJECT-TYPE
|
|
SYNTAX Sub10OperStatus
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The status of the remote ethernet interface. Synonymous but
|
|
not identical with interfaces OperState on the remote unit"
|
|
|
|
::= { sub10EthRmtStatusEntry 1 }
|
|
|
|
|
|
sub10EthRmtMacAddress OBJECT-TYPE
|
|
SYNTAX Sub10MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The MAC address of the remote ethernet interface. Synonymous
|
|
with interfaces ifPhysAddress on the remote unit."
|
|
|
|
::= { sub10EthRmtStatusEntry 2 }
|
|
|
|
|
|
sub10EthRmtSpeed OBJECT-TYPE
|
|
SYNTAX Unsigned32(0..4294967295)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The estimated speed of the remote ethernet interface in
|
|
bits per second. Synonymous with interfaces ifSpeed on the remote unit"
|
|
|
|
::= { sub10EthRmtStatusEntry 3 }
|
|
|
|
|
|
sub10EthRmtDuplex OBJECT-TYPE
|
|
SYNTAX Sub10Duplex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The duplex operation of the remote ethernet interface"
|
|
|
|
::= { sub10EthRmtStatusEntry 4 }
|
|
|
|
|
|
sub10EthRmtMDI OBJECT-TYPE
|
|
SYNTAX Sub10MDIType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The MDI/MDIX state of the remote ethernet interface"
|
|
|
|
::= { sub10EthRmtStatusEntry 5 }
|
|
|
|
|
|
-- ****************************************************************************
|
|
-- .sub10EthernetMgmt.sub10EthMgmtPhy Objects
|
|
-- ****************************************************************************
|
|
|
|
sub10EthMgmtPhyTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Sub10EthMgmtPhyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table defines the status objects of the ethernet interface."
|
|
|
|
::= { sub10EthMgmtPhy 1 }
|
|
|
|
|
|
sub10EthMgmtPhyEntry OBJECT-TYPE
|
|
SYNTAX Sub10EthMgmtPhyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry (row) in the sub10EthMgmtPhyTable."
|
|
INDEX { sub10EthIfIndex }
|
|
|
|
::= { sub10EthMgmtPhyTable 1 }
|
|
|
|
Sub10EthMgmtPhyEntry ::= SEQUENCE {
|
|
sub10EthMgmtPhyAutoNeg Sub10State,
|
|
sub10EthMgmtPhySpeed Unsigned32,
|
|
sub10EthMgmtPhyDuplex Sub10Duplex,
|
|
sub10EthMgmtPhyMDI Sub10MDIType
|
|
}
|
|
|
|
sub10EthMgmtPhyAutoNeg OBJECT-TYPE
|
|
SYNTAX Sub10State
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Auto-negotiation of ethernet interface parameters."
|
|
DEFVAL { stateDisabled }
|
|
|
|
::= { sub10EthMgmtPhyEntry 1 }
|
|
|
|
|
|
sub10EthMgmtPhySpeed OBJECT-TYPE
|
|
SYNTAX Unsigned32(0..4294967295)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Speed of the ethernet interface in bits per second used
|
|
only when sub10UnitMgmtPhyAutoNeg=disabled."
|
|
|
|
::= { sub10EthMgmtPhyEntry 2 }
|
|
|
|
|
|
sub10EthMgmtPhyDuplex OBJECT-TYPE
|
|
SYNTAX Sub10Duplex
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The duplex operation of the ethernet interface used
|
|
only when sub10UnitMgmtPhyAutoNeg=disabled."
|
|
|
|
::= { sub10EthMgmtPhyEntry 3 }
|
|
|
|
|
|
sub10EthMgmtPhyMDI OBJECT-TYPE
|
|
SYNTAX Sub10MDIType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The duplex operation of the ethernet interface used
|
|
only when sub10UnitMgmtPhyAutoNeg=disabled."
|
|
|
|
::= { sub10EthMgmtPhyEntry 4 }
|
|
|
|
|
|
-- ****************************************************************************
|
|
-- .sub10EthernetMgmt.sub10EthMgmtVlan Objects
|
|
-- ****************************************************************************
|
|
|
|
sub10EthMgmtVlanFiltering OBJECT-TYPE
|
|
SYNTAX Sub10State
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "VLAN filtering on the ethernet interface.
|
|
This applies to user traffic only not management traffic however
|
|
to enable VLAN filtering a Unit Management VLAN configuration
|
|
must be set. See sub10UnitMgmtVlan.
|
|
|
|
IMPORTANT: This object is controlled by transaction management.
|
|
Any changes to this object must be transactionally acknowledged
|
|
following a successful set thus protecting against loss of
|
|
communication with the unit. To acknowledge the transaction
|
|
set the object sub10UnitMgmtTransaction to transactionCommit(2)."
|
|
DEFVAL { stateDisabled }
|
|
|
|
::= { sub10EthMgmtVlan 1 }
|
|
|
|
|
|
sub10EthMgmtVlanDefaultEnabled OBJECT-TYPE
|
|
SYNTAX Sub10State
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable Default VLAN tagging and untagging on the ethernet interface.
|
|
Only valid when sub10EthMgmtVlanFiltering is enabled.
|
|
|
|
Default VAN tagging allows manipulation of untagged traffic ingressing
|
|
the interface by applying the specified Default VLAN Id, priority and
|
|
DEI and manipulation of traffic egressing the ethernet interface that
|
|
is tagged with the Default VLAN by stripping off the VLAN and transmitting
|
|
as untagged traffic.
|
|
|
|
IMPORTANT: This object is controlled by transaction management.
|
|
Any changes to this object must be transactionally acknowledged
|
|
following a successful set thus protecting against loss of
|
|
communication with the unit. To acknowledge the transaction
|
|
set the object sub10UnitMgmtTransaction to transactionCommit(2)."
|
|
DEFVAL { stateDisabled }
|
|
|
|
::= { sub10EthMgmtVlan 2 }
|
|
|
|
|
|
sub10EthMgmtVlanDefaultId OBJECT-TYPE
|
|
SYNTAX Sub10VlanId
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The default vlan id which is tagged to all incoming untagged
|
|
user traffic ingressing the ethernet interface. The default VLAN
|
|
is also untagged from all user traffic egressing the ethernet
|
|
interface.
|
|
|
|
The default VLAN must be present in the allowed VLAN table
|
|
sub10EthMgmtVlanAllowedTable and is only valid when
|
|
sub10EthMgmtVlanDefaultEnabled and sub10EthMgmtVlanFiltering are enabled.
|
|
|
|
IMPORTANT: This object is controlled by transaction management.
|
|
Any changes to this object must be transactionally acknowledged
|
|
following a successful set thus protecting against loss of
|
|
communication with the unit. To acknowledge the transaction
|
|
set the object sub10UnitMgmtTransaction to transactionCommit(2)."
|
|
DEFVAL { 0 }
|
|
|
|
::= { sub10EthMgmtVlan 3 }
|
|
|
|
|
|
sub10EthMgmtVlanDefaultPriority OBJECT-TYPE
|
|
SYNTAX Sub10VlanPriority
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The default vlan priority used when tagging the default VLAN
|
|
to all incoming untagged user traffic ingressing the ethernet interface.
|
|
|
|
Only valid when sub10EthMgmtVlanDefaultEnabled and sub10EthMgmtVlanFiltering are enabled.
|
|
|
|
IMPORTANT: This object is controlled by transaction management.
|
|
Any changes to this object must be transactionally acknowledged
|
|
following a successful set thus protecting against loss of
|
|
communication with the unit. To acknowledge the transaction
|
|
set the object sub10UnitMgmtTransaction to transactionCommit(2)."
|
|
DEFVAL { 0 }
|
|
|
|
::= { sub10EthMgmtVlan 4 }
|
|
|
|
|
|
sub10EthMgmtVlanDefaultDEI OBJECT-TYPE
|
|
SYNTAX Sub10State
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The default vlan drop eligible indicator used when tagging the default VLAN
|
|
to all incoming untagged user traffic ingressing the ethernet interface.
|
|
|
|
Only valid when sub10EthMgmtVlanDefaultEnabled and sub10EthMgmtVlanFiltering are enabled.
|
|
|
|
IMPORTANT: This object is controlled by transaction management.
|
|
Any changes to this object must be transactionally acknowledged
|
|
following a successful set thus protecting against loss of
|
|
communication with the unit. To acknowledge the transaction
|
|
set the object sub10UnitMgmtTransaction to transactionCommit(2)."
|
|
DEFVAL { stateDisabled }
|
|
|
|
::= { sub10EthMgmtVlan 5 }
|
|
|
|
|
|
sub10EthMgmtVlanIngressAction OBJECT-TYPE
|
|
SYNTAX Sub10VlanTagAction
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The manipulation action used for all ethernet frames
|
|
being received (ingress) in from the ethernet interface.
|
|
Only if the default VLAN is set sub10EthMgmtVlanDefaultVlanId > 0
|
|
and sub10EthMgmtVlanFiltering is enabled.
|
|
|
|
untag - untag all incoming frames that are tagged with sub10EthMgmtVlanDefaultVlanId.
|
|
tag - tag all incoming untagged frames with sub10EthMgmtVlanDefaultVlanId,
|
|
,sub10EthMgmtVlanDefaultPriority and sub10EthMgmtVlanDefaultDEI.
|
|
and priority sub10EthMgmtTagWithVlanPriority.
|
|
drop - discard the frame, do not forward.
|
|
|
|
This is currently fixed to tag all ingressing traffic
|
|
if a default VLAN is set sub10EthMgmtVlanDefaultVlanId > 0."
|
|
DEFVAL { tag }
|
|
|
|
::= { sub10EthMgmtVlan 6 }
|
|
|
|
|
|
sub10EthMgmtVlanEgressAction OBJECT-TYPE
|
|
SYNTAX Sub10VlanTagAction
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The manipulation action used for all ethernet frames
|
|
being transmitted (egress) out of the ethernet interface.
|
|
Only if the default VLAN is set sub10EthMgmtVlanDefaultVlanId > 0
|
|
and sub10EthMgmtVlanFiltering is enabled.
|
|
|
|
untag - untag all outgoing frames that are tagged with sub10EthMgmtVlanDefaultVlanId.
|
|
tag - tag all outgoing untagged frames with sub10EthMgmtVlanDefaultVlanId,
|
|
,sub10EthMgmtVlanDefaultPriority and sub10EthMgmtVlanDefaultDEI.
|
|
and priority sub10EthMgmtTagWithVlanPriority.
|
|
drop - discard the frame, do not forward.
|
|
|
|
This is currently fixed to untag all egressing traffic."
|
|
DEFVAL { untag }
|
|
|
|
::= { sub10EthMgmtVlan 7 }
|
|
|
|
|
|
sub10EthMgmtVlanAllowedTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Sub10EthMgmtVlanAllowedEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This tables defines the VLANs that are allowed to pass through the ethernet
|
|
interface. The table is only used when the value of sub10EthMgmtVlanFiltering is enabled.
|
|
|
|
The table only contains an entry if the specific vlan is to be allowed to flow through the interface.
|
|
If a VLAN is not in the table then the ethernet frame is dropped.
|
|
|
|
If sub10EthMgmtVlanFiltering is enabled this table must contain at least 1 VLAN.
|
|
|
|
IMPORTANT: This object is controlled by transaction management.
|
|
Any changes to this object must be transactionally acknowledged
|
|
following a successful set thus protecting against loss of
|
|
communication with the unit. To acknowledge the transaction
|
|
set the object sub10UnitMgmtTransaction to transactionCommit(2)."
|
|
|
|
::= { sub10EthMgmtVlan 8 }
|
|
|
|
|
|
sub10EthMgmtVlanAllowedEntry OBJECT-TYPE
|
|
SYNTAX Sub10EthMgmtVlanAllowedEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry (row) in the sub10UnitMgmtVlanTable.
|
|
If the rowStatus is set to notInService(2) then
|
|
the entry is not valid and no columnar objects are returned."
|
|
INDEX { sub10EthMgmtVlanAllowedIndex }
|
|
|
|
::= { sub10EthMgmtVlanAllowedTable 1 }
|
|
|
|
Sub10EthMgmtVlanAllowedEntry ::= SEQUENCE {
|
|
sub10EthMgmtVlanAllowedIndex Unsigned32,
|
|
sub10EthMgmtVlanAllowedRowStatus RowStatus,
|
|
sub10EthMgmtVlanAllowedId Sub10VlanId
|
|
}
|
|
|
|
sub10EthMgmtVlanAllowedIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..60)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The sub10EthMgmtVlanTable index."
|
|
|
|
::= { sub10EthMgmtVlanAllowedEntry 1 }
|
|
|
|
|
|
sub10EthMgmtVlanAllowedRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The row status of this row.
|
|
All table rows are fixed in size
|
|
and as such do not require conceptual row
|
|
creation. Instead the RowStatus is set to
|
|
active(1) or notInService(2) which indicates
|
|
that the row is operationally in use or not.
|
|
The default value is notInService(2) meaning
|
|
the entry is not used by default. To make
|
|
the entry valid with already consistent row
|
|
objects this object must be set to active(1).
|
|
If row objects are not yet set to consistent
|
|
values the row status must first be set to
|
|
createAndWait(5) after which the row status is
|
|
set to 'notReady(3)'. When in the 'notReady(3)'
|
|
state row objects can then be set to consistent
|
|
values before row status can be set to active(1).
|
|
To delete the row set this to destroy(6)."
|
|
DEFVAL { notInService }
|
|
|
|
::= { sub10EthMgmtVlanAllowedEntry 2 }
|
|
|
|
|
|
sub10EthMgmtVlanAllowedId OBJECT-TYPE
|
|
SYNTAX Sub10VlanId
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The vlan id which is allowed to pass through the ethernet interface.
|
|
Duplicate vlan ids in multiple entries of the table with RowStatus 'active(1)
|
|
are not allowed and any attempt to set a duplicate active entry will be rejected.
|
|
|
|
IMPORTANT: This object is controlled by transaction management.
|
|
Any changes to this object must be transactionally acknowledged
|
|
following a successful set thus protecting against loss of
|
|
communication with the unit. To acknowledge the transaction
|
|
set the object sub10UnitMgmtTransaction to transactionCommit(2)."
|
|
DEFVAL { 0 }
|
|
|
|
::= { sub10EthMgmtVlanAllowedEntry 3 }
|
|
|
|
|
|
-- ****************************************************************************
|
|
-- .sub10EthernetMgmt.sub10EthMgmtQoS Objects
|
|
-- ****************************************************************************
|
|
|
|
sub10EthMgmtQoSActiveState OBJECT-TYPE
|
|
SYNTAX Sub10State
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This defines if QoS is enabled or disabled."
|
|
DEFVAL { stateDisabled }
|
|
|
|
::= { sub10EthMgmtQoS 1 }
|
|
|
|
|
|
sub10EthMgmtQoSMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
qosEthernet(1),
|
|
qosIPMPLS(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Defines the mode of QoS action to be applied to
|
|
the QoS queues.
|
|
|
|
qosEthernet:
|
|
|
|
- Traffic is mapped to QoS queues
|
|
- based on Ethernet protocol
|
|
- VLANId and/or PCP Bits.
|
|
- See sub10EthMgmtQoSVlanMappingTable
|
|
- and sub10EthMgmtQoSPCPMappingTable.
|
|
|
|
qosIPMPLS:
|
|
|
|
- Traffic is mapped to QoS queues
|
|
- based on IP protocol
|
|
- DSCP markings and/or MPLS traffic
|
|
- classes.
|
|
|
|
See sub10EthMgmtQoSDSCPMappingTable and sub10EthMgmtQoSMPLSMappingTable."
|
|
DEFVAL { qosEthernet }
|
|
|
|
::= { sub10EthMgmtQoS 2 }
|
|
|
|
|
|
sub10EthMgmtQoSUntaggedQueue OBJECT-TYPE
|
|
SYNTAX Sub10QoSQueue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This defines the QoS queue where all untagged
|
|
ethernet frames are placed.
|
|
|
|
Only valid when sub10EthMgmtQoSQType = 'qosEthernet'
|
|
|
|
For tagged frames see sub10EthMgmtQoSVlanMappingTable
|
|
and sub10EthMgmtQoSPCPMappingTable."
|
|
DEFVAL { 0 }
|
|
|
|
::= { sub10EthMgmtQoS 3 }
|
|
|
|
|
|
sub10EthMgmtQoSQTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Sub10EthMgmtQoSQEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table configures the characteristics of a Quality of
|
|
Service queue. There are a fixed number of 8 queues in total
|
|
and therefore 8 entries in this table indexed 1 thru 8.
|
|
|
|
The number of queue entries in the table is given by the value
|
|
of sub10EthMgmtQoSQNumber."
|
|
|
|
::= { sub10EthMgmtQoS 4 }
|
|
|
|
|
|
sub10EthMgmtQoSQEntry OBJECT-TYPE
|
|
SYNTAX Sub10EthMgmtQoSQEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry (row) in the sub10EthMgmtQoSQTable."
|
|
INDEX { sub10EthMgmtQoSQIndex }
|
|
|
|
::= { sub10EthMgmtQoSQTable 1 }
|
|
|
|
Sub10EthMgmtQoSQEntry ::= SEQUENCE {
|
|
sub10EthMgmtQoSQIndex Unsigned32,
|
|
sub10EthMgmtQoSQSchedulingType INTEGER,
|
|
sub10EthMgmtQoSQDWRRWeight Unsigned32,
|
|
sub10EthMgmtQoSQCongestionPolicy INTEGER,
|
|
sub10EthMgmtQoSQSizeMax Unsigned32,
|
|
sub10EthMgmtQoSQLen Unsigned32
|
|
}
|
|
|
|
sub10EthMgmtQoSQIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..8)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The queue number used as an index, fixed to
|
|
8 standard queues."
|
|
|
|
::= { sub10EthMgmtQoSQEntry 1 }
|
|
|
|
|
|
sub10EthMgmtQoSQSchedulingType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
qosSPQ(1),
|
|
qosDWRR(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The scheduling discipline applied to the
|
|
queue.
|
|
|
|
qosSPQ - Strict Priority Queueing
|
|
|
|
Queues are serviced in strict priority
|
|
order. Packets on the queue are servicedd
|
|
and transmitted until either the queue is empty
|
|
or a packet is found in a higher queue,
|
|
in the latter case the higher priority queue
|
|
take precedence.
|
|
|
|
Individual PCP (CoS) bits or DSCP markings in each
|
|
packet are not observed within the
|
|
queue and are not therefore transmitted first
|
|
according to their relative priority. Instead
|
|
it is possible to map certain VLANs, PCP bits
|
|
and DSCP marking to certain queues to achieve
|
|
priority transmission.
|
|
|
|
The mapping of VLAN, PCP bits or DSCP markings
|
|
to a specific queue are managed using
|
|
tables :
|
|
|
|
sub10EthMgmtQoSVlanTable
|
|
sub10EthMgmtQoSPCPTable
|
|
sub10EthMgmtQoSDSCPTable
|
|
|
|
qosDWRR - Deficit Weighted Round Robin
|
|
|
|
A weighting is allocated to each queue
|
|
which defines the number of bytes
|
|
that can be transmitted from that
|
|
queue in a single visit of the
|
|
scheduler. This is used to calculate
|
|
a quantum which is the number of bytes
|
|
that can always be transmitted in each visit
|
|
of the scheduler.
|
|
|
|
A deficit counter is also maintained across
|
|
visits from the scheduler, at each visit
|
|
the quantum is added to the deficit. This
|
|
ensures that on average a queue that is not
|
|
loaded to its intended capacity will utilise
|
|
the calculated deficit at times when the queue
|
|
is busy. At startup Deficit counter is initialised
|
|
to zero.
|
|
|
|
On each visit of the scheduler packets are
|
|
transmitted according to the following
|
|
rules...
|
|
|
|
Deficit = Quantum + Deficit.
|
|
|
|
while (Queue not empty and PktLength <= Deficit)
|
|
Transmit Pkt
|
|
Deficit = Deficit - PktLength
|
|
|
|
Remaining Deficit is carried forward to the
|
|
next visit of the scheduler.
|
|
|
|
Effective behaviour of DWRR is as follows:
|
|
|
|
1. Available bandwidth is shared fairly when queues
|
|
are not saturated
|
|
2. Lower priority saturated queues will transmit
|
|
at their allocated service rate.
|
|
3. Any remaining bandwidth is shared amongst
|
|
unsaturated queues.
|
|
|
|
NB. In a mixed configuration where some queues are
|
|
configured as Strict Priority (SP) and some configured
|
|
as Deficit Weighted Round Robin (DWRR), then queues configured
|
|
as SP should all be higher in scheduling priority than those
|
|
configured as DWRR. This is to avoid the lower priority queues
|
|
having transmission precedence over higher priority queues."
|
|
DEFVAL { qosSPQ }
|
|
|
|
::= { sub10EthMgmtQoSQEntry 2 }
|
|
|
|
|
|
sub10EthMgmtQoSQDWRRWeight OBJECT-TYPE
|
|
SYNTAX Unsigned32(0..100)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "A percentage weighting factor used to calculate
|
|
the quantum value used to calculate the starting
|
|
transmission credit at each visit of the queue
|
|
scheduler. Only for scheduling type Deficit
|
|
Weighted Round Robin.
|
|
sub10EthMgmtQoSQSchedulingType = 'qosDWRR'
|
|
|
|
The weighting is calculated as the ratio of the
|
|
transmit rate configured as a percentage. The
|
|
internal implementation of DWRR will calculate
|
|
the correct quantum based on total bandwidth
|
|
available."
|
|
DEFVAL { 100 }
|
|
|
|
::= { sub10EthMgmtQoSQEntry 3 }
|
|
|
|
|
|
sub10EthMgmtQoSQCongestionPolicy OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
qosTailDrop(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The policy used when a queue is congested."
|
|
DEFVAL { qosTailDrop }
|
|
|
|
::= { sub10EthMgmtQoSQEntry 4 }
|
|
|
|
|
|
sub10EthMgmtQoSQSizeMax OBJECT-TYPE
|
|
SYNTAX Unsigned32(0..4294967295)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The maximum size of the queue expressed in packets."
|
|
DEFVAL { 100 }
|
|
|
|
::= { sub10EthMgmtQoSQEntry 5 }
|
|
|
|
|
|
sub10EthMgmtQoSQLen OBJECT-TYPE
|
|
SYNTAX Unsigned32(0..4294967295)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The current length of the queue expressed in packets."
|
|
|
|
::= { sub10EthMgmtQoSQEntry 6 }
|
|
|
|
|
|
sub10EthMgmtQoSVlanMappingNumber OBJECT-TYPE
|
|
SYNTAX Unsigned32(0..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of sub10EthMgmtQoSVlanMappingTable table entries present
|
|
on this system."
|
|
|
|
::= { sub10EthMgmtQoS 5 }
|
|
|
|
|
|
sub10EthMgmtQoSVlanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Sub10EthMgmtQoSVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table configures the Quality of Service
|
|
Vlan to queue mapping.
|
|
|
|
Multiple Vlans may be mapped to any queue. On egress of the
|
|
ethernet interface all pkts tagged with the specific Vlan Id
|
|
are inserted onto the specified queue.
|
|
|
|
See sub10EthMgmtQoSQTable for more information on QoS
|
|
queueing.
|
|
|
|
The number of entries in the table is given by the value
|
|
of sub10EthMgmtQoSVlanNumber."
|
|
|
|
::= { sub10EthMgmtQoS 6 }
|
|
|
|
|
|
sub10EthMgmtQoSVlanEntry OBJECT-TYPE
|
|
SYNTAX Sub10EthMgmtQoSVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry (row) in the sub10EthMgmtQoSVlanMappingTable."
|
|
INDEX { sub10EthMgmtQoSVlanIndex }
|
|
|
|
::= { sub10EthMgmtQoSVlanTable 1 }
|
|
|
|
Sub10EthMgmtQoSVlanEntry ::= SEQUENCE {
|
|
sub10EthMgmtQoSVlanIndex Unsigned32,
|
|
sub10EthMgmtQoSVlanId Sub10VlanId,
|
|
sub10EthMgmtQoSVlanQueue Sub10QoSQueue
|
|
}
|
|
|
|
sub10EthMgmtQoSVlanIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..16)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The sub10EthMgmtQoSVlanMappingTable index."
|
|
|
|
::= { sub10EthMgmtQoSVlanEntry 1 }
|
|
|
|
|
|
sub10EthMgmtQoSVlanId OBJECT-TYPE
|
|
SYNTAX Sub10VlanId
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The vlan id used as an index to the table and which
|
|
is egressing through the ethernet interface and which
|
|
should be placed on the queue specified by
|
|
sub10EthMgmtQoSVlanQueueIndex."
|
|
DEFVAL { 0 }
|
|
|
|
::= { sub10EthMgmtQoSVlanEntry 2 }
|
|
|
|
|
|
sub10EthMgmtQoSVlanQueue OBJECT-TYPE
|
|
SYNTAX Sub10QoSQueue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The queue number which identifies the specific queue where the packets
|
|
that are tagged with the Vlan Id specified in sub10EthMgmtQoSVlanId
|
|
are inserted."
|
|
|
|
::= { sub10EthMgmtQoSVlanEntry 3 }
|
|
|
|
|
|
sub10EthMgmtQoSPCPTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Sub10EthMgmtQoSPCPEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table configures the Quality of Service Priority
|
|
Code Point (PCP) or Pbits to queue mapping.
|
|
|
|
Multiple PCPs may be mapped to the same queue but the same
|
|
PCP cannot be mapped to more than one queue. This table
|
|
has a maximum size of 8 entries with exactly 1 entry per
|
|
PCP bit.
|
|
|
|
On egress of the ethernet interface all pkts tagged with the
|
|
specific PCP bit (irrespective of its Vlan Id) is inserted
|
|
on the specified queue.
|
|
|
|
See sub10EthMgmtQoSQTable for more information on QoS
|
|
queueing.
|
|
|
|
The number of entries in the table is given by the value
|
|
of sub10EthMgmtQoSPCPMappingNumber (maximum 8)."
|
|
|
|
::= { sub10EthMgmtQoS 8 }
|
|
|
|
|
|
sub10EthMgmtQoSPCPEntry OBJECT-TYPE
|
|
SYNTAX Sub10EthMgmtQoSPCPEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry (row) in the sub10EthMgmtQoSPCPMappingTable."
|
|
INDEX { sub10EthMgmtQoSPCPIndex }
|
|
|
|
::= { sub10EthMgmtQoSPCPTable 1 }
|
|
|
|
Sub10EthMgmtQoSPCPEntry ::= SEQUENCE {
|
|
sub10EthMgmtQoSPCPIndex Unsigned32,
|
|
sub10EthMgmtQoSPCPQueue Sub10QoSQueue
|
|
}
|
|
|
|
sub10EthMgmtQoSPCPIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..8)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The sub10EthMgmtQoSPCPTable index.
|
|
This represents the PCP bits priority
|
|
value.
|
|
|
|
sub10EthMgmtQoSPCPIndex(1)=PCPBit(0)
|
|
sub10EthMgmtQoSPCPIndex(2)=PCPBit(1)
|
|
sub10EthMgmtQoSPCPIndex(3)=PCPBit(2)
|
|
sub10EthMgmtQoSPCPIndex(4)=PCPBit(3)
|
|
sub10EthMgmtQoSPCPIndex(5)=PCPBit(4)
|
|
sub10EthMgmtQoSPCPIndex(6)=PCPBit(5)
|
|
sub10EthMgmtQoSPCPIndex(7)=PCPBit(6)
|
|
sub10EthMgmtQoSPCPIndex(8)=PCPBit(7)"
|
|
|
|
::= { sub10EthMgmtQoSPCPEntry 1 }
|
|
|
|
|
|
sub10EthMgmtQoSPCPQueue OBJECT-TYPE
|
|
SYNTAX Sub10QoSQueue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The queue number in the sub10EthMgmtQoSQTable
|
|
which identifies the specific queue where the packets
|
|
tagged with the specific PCP bit sub10EthMgmtQoSPCPIndex
|
|
are inserted. There are up to 8 queues."
|
|
|
|
::= { sub10EthMgmtQoSPCPEntry 2 }
|
|
|
|
|
|
sub10EthMgmtQoSDSCPMappingNumber OBJECT-TYPE
|
|
SYNTAX Unsigned32(0..64)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of sub10EthMgmtQoSDSCPMappingTable table entries present
|
|
on this system."
|
|
|
|
::= { sub10EthMgmtQoS 9 }
|
|
|
|
|
|
sub10EthMgmtQoSDSCPTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Sub10EthMgmtQoSDSCPEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table configures the Quality of Service Differentiated
|
|
Services Code Point (DSCP) to queue mapping.
|
|
|
|
Multiple DSCPs may be mapped to the same queue but the same
|
|
DSCP cannot be mapped to more than one queue. This table has
|
|
a maximum size of 64 with 1 entry per DSCP value.
|
|
|
|
On egress of the ethernet interface all pkts tagged with the
|
|
specific DSCP marking in the IP header will be inserted
|
|
onto the specified queue.
|
|
|
|
See sub10EthMgmtQoSQTable for more information on QoS
|
|
queueing.
|
|
|
|
The number of entries in the table is given by the value
|
|
of sub10EthMgmtQoSDSCPMappingNumber (maximum 64)."
|
|
|
|
::= { sub10EthMgmtQoS 10 }
|
|
|
|
|
|
sub10EthMgmtQoSDSCPEntry OBJECT-TYPE
|
|
SYNTAX Sub10EthMgmtQoSDSCPEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry (row) in the sub10EthMgmtQoSDSCPMappingTable."
|
|
INDEX { sub10EthMgmtQoSDSCPIndex }
|
|
|
|
::= { sub10EthMgmtQoSDSCPTable 1 }
|
|
|
|
Sub10EthMgmtQoSDSCPEntry ::= SEQUENCE {
|
|
sub10EthMgmtQoSDSCPIndex Unsigned32,
|
|
sub10EthMgmtQoSDSCPMarking Unsigned32,
|
|
sub10EthMgmtQoSDSCPQueue Sub10QoSQueue
|
|
}
|
|
|
|
sub10EthMgmtQoSDSCPIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..64)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The sub10EthMgmtQoSDSCPTable index."
|
|
|
|
::= { sub10EthMgmtQoSDSCPEntry 1 }
|
|
|
|
|
|
sub10EthMgmtQoSDSCPMarking OBJECT-TYPE
|
|
SYNTAX Unsigned32(0..63)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The DSCP value used as an index to the table. This defines
|
|
the DSCP value which when egressing through the ethernet
|
|
interface is placed on the queue specified by
|
|
sub10EthMgmtQoSVlanQueueIndex."
|
|
|
|
::= { sub10EthMgmtQoSDSCPEntry 2 }
|
|
|
|
|
|
sub10EthMgmtQoSDSCPQueue OBJECT-TYPE
|
|
SYNTAX Sub10QoSQueue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The queue number in the sub10EthMgmtQoSQTable
|
|
which identifies the specific queue where the packets
|
|
tagged with the specific DSCP marking sub10EthMgmtQoSDSCP
|
|
are inserted."
|
|
|
|
::= { sub10EthMgmtQoSDSCPEntry 3 }
|
|
|
|
|
|
sub10EthMgmtQoSMPLSMappingNumber OBJECT-TYPE
|
|
SYNTAX Unsigned32(0..64)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of sub10EthMgmtQoSMPLSMappingTable table entries present
|
|
on this system.This is equivelent to the number of MPLS Traffic
|
|
classes"
|
|
|
|
::= { sub10EthMgmtQoS 11 }
|
|
|
|
|
|
sub10EthMgmtQoSMPLSTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Sub10EthMgmtQoSMPLSEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table configures the Quality of Service Multi-Protocol
|
|
Label Switching protocol (MPLS) Traffic Class (TC) to queue mapping.
|
|
|
|
Multiple MPLS TCs may be mapped to the same queue but the same
|
|
MPLS TC cannot be mapped to more than one queue. This table has
|
|
a maximum size of 64 with 1 entry per MPLS TC value.
|
|
|
|
On egress of the ethernet interface all pkts tagged with the
|
|
specific MPLS TC in the IP header will be inserted
|
|
onto the specified queue.
|
|
|
|
See sub10EthMgmtQoSQTable for more information on QoS
|
|
queueing.
|
|
|
|
The number of entries in the table is given by the value
|
|
of sub10EthMgmtQoSMPLSMappingNumber (maximum 8)."
|
|
|
|
::= { sub10EthMgmtQoS 12 }
|
|
|
|
|
|
sub10EthMgmtQoSMPLSEntry OBJECT-TYPE
|
|
SYNTAX Sub10EthMgmtQoSMPLSEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry (row) in the sub10EthMgmtQoSMPLSMappingTable."
|
|
INDEX { sub10EthMgmtQoSMPLSIndex }
|
|
|
|
::= { sub10EthMgmtQoSMPLSTable 1 }
|
|
|
|
Sub10EthMgmtQoSMPLSEntry ::= SEQUENCE {
|
|
sub10EthMgmtQoSMPLSIndex Unsigned32,
|
|
sub10EthMgmtQoSMPLSTrafficClass Unsigned32,
|
|
sub10EthMgmtQoSMPLSQueue Sub10QoSQueue
|
|
}
|
|
|
|
sub10EthMgmtQoSMPLSIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..8)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The sub10EthMgmtQoSMPLSMappingTable index."
|
|
|
|
::= { sub10EthMgmtQoSMPLSEntry 1 }
|
|
|
|
|
|
sub10EthMgmtQoSMPLSTrafficClass OBJECT-TYPE
|
|
SYNTAX Unsigned32(0..7)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The MPLS Traffic Class value used as an index to the table.
|
|
This defines the MPLS TC value which when egressing through
|
|
the ethernet interface is placed on the queue specified by
|
|
sub10EthMgmtQoSVlanQueueIndex."
|
|
|
|
::= { sub10EthMgmtQoSMPLSEntry 2 }
|
|
|
|
|
|
sub10EthMgmtQoSMPLSQueue OBJECT-TYPE
|
|
SYNTAX Sub10QoSQueue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The queue number in the sub10EthMgmtQoSQTable
|
|
which identifies the specific queue where the packets
|
|
tagged with the specific MPLS Traffic Class
|
|
sub10EthMgmtQoSMPLSTrafficClass are inserted."
|
|
|
|
::= { sub10EthMgmtQoSMPLSEntry 3 }
|
|
|
|
|
|
-- ****************************************************************************
|
|
-- .sub10EthernetMgmt.sub10EthMgmtStats Objects
|
|
-- ****************************************************************************
|
|
|
|
sub10EthMgmtStatsActiveTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Sub10EthMgmtStatsActiveEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table maintains an entry for each Ethernet
|
|
statistic that is enabled and active."
|
|
|
|
::= { sub10EthMgmtStats 1 }
|
|
|
|
|
|
sub10EthMgmtStatsActiveEntry OBJECT-TYPE
|
|
SYNTAX Sub10EthMgmtStatsActiveEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in the sub10EthMgmtStatsActiveTable.
|
|
Each entry represents an object instance of ethernet
|
|
stats and it's current state."
|
|
INDEX { sub10EthMgmtStatsActiveIndex }
|
|
|
|
::= { sub10EthMgmtStatsActiveTable 1 }
|
|
|
|
Sub10EthMgmtStatsActiveEntry ::= SEQUENCE {
|
|
sub10EthMgmtStatsActiveIndex Unsigned32,
|
|
sub10EthMgmtStatsActiveName OCTET STRING,
|
|
sub10EthMgmtStatsActiveState Sub10State
|
|
}
|
|
|
|
sub10EthMgmtStatsActiveIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..30)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The number of ethernet stats objects
|
|
used as an index to this table."
|
|
|
|
::= { sub10EthMgmtStatsActiveEntry 1 }
|
|
|
|
|
|
sub10EthMgmtStatsActiveName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The stats object name. This is the name of the
|
|
ethernet stats object in the sub10EthernetStatsCurrent
|
|
group."
|
|
|
|
::= { sub10EthMgmtStatsActiveEntry 2 }
|
|
|
|
|
|
sub10EthMgmtStatsActiveState OBJECT-TYPE
|
|
SYNTAX Sub10State
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "If set to 'enabled' the statistic is active."
|
|
DEFVAL { stateEnabled }
|
|
|
|
::= { sub10EthMgmtStatsActiveEntry 3 }
|
|
|
|
|
|
-- ****************************************************************************
|
|
-- .sub10Ethernet.sub10EthernetStats Objects
|
|
-- ****************************************************************************
|
|
|
|
sub10EthStatsTimeElapsed OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The time that has elapsed from the beginning
|
|
of the statistical measurement period.
|
|
|
|
This is normally time from just after the last reboot time
|
|
when the statistics module begins it's calculations.
|
|
|
|
If, for some reason, such as an adjustment in the
|
|
system's time-of-day clock, the current interval
|
|
exceeds the maximum value, the agent will return
|
|
the maximum value."
|
|
|
|
::= { sub10EthernetStats 1 }
|
|
|
|
|
|
-- ****************************************************************************
|
|
-- .sub10EthernetStats.sub10EthernetStatsCurrent Objects
|
|
-- ****************************************************************************
|
|
|
|
sub10EthernetStatsCurrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Sub10EthernetStatsCurrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table defines the current stats objects of the ethernet interface."
|
|
|
|
::= { sub10EthernetStatsCurrent 1 }
|
|
|
|
|
|
sub10EthernetStatsCurrEntry OBJECT-TYPE
|
|
SYNTAX Sub10EthernetStatsCurrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry (row) in the sub10EthernetStatsCurrTable."
|
|
INDEX { sub10EthIfIndex }
|
|
|
|
::= { sub10EthernetStatsCurrTable 1 }
|
|
|
|
Sub10EthernetStatsCurrEntry ::= SEQUENCE {
|
|
sub10EthStatsCurrRxOctets Counter32,
|
|
sub10EthStatsCurrRxGoodFrms Counter32,
|
|
sub10EthStatsCurrRxBcastFrms Counter32,
|
|
sub10EthStatsCurrRxMcastFrms Counter32,
|
|
sub10EthStatsCurrRxPauseFrms Counter32,
|
|
sub10EthStatsCurrRxCRCErrs Counter32,
|
|
sub10EthStatsCurrRxAlignErrs Counter32,
|
|
sub10EthStatsCurrRxOversized Counter32,
|
|
sub10EthStatsCurrRxJabberFrms Counter32,
|
|
sub10EthStatsCurrRxUndersized Counter32,
|
|
sub10EthStatsCurrRxFragments Counter32,
|
|
sub10EthStatsCurrRxSOFOvrns Counter32,
|
|
sub10EthStatsCurrTxOctets Counter32,
|
|
sub10EthStatsCurrTxGoodFrms Counter32,
|
|
sub10EthStatsCurrTxBcastFrms Counter32,
|
|
sub10EthStatsCurrTxMcastFrms Counter32,
|
|
sub10EthStatsCurrTxPauseFrms Counter32,
|
|
sub10EthStatsCurrTxDeferred Counter32,
|
|
sub10EthStatsCurrTxCollsn Counter32,
|
|
sub10EthStatsCurrTxSnglCollsn Counter32,
|
|
sub10EthStatsCurrTxMlplCollsn Counter32,
|
|
sub10EthStatsCurrTxExsvCollsn Counter32,
|
|
sub10EthStatsCurrTxLtCollsn Counter32,
|
|
sub10EthStatsCurrTxCSenseErrs Counter32,
|
|
sub10EthStatsCurrPkts64Octets Counter32,
|
|
sub10EthStatsCurrPkts65T127 Counter32,
|
|
sub10EthStatsCurrPkts128T255 Counter32,
|
|
sub10EthStatsCurrPkts256T511 Counter32,
|
|
sub10EthStatsCurrPkts512T1023 Counter32,
|
|
sub10EthStatsCurrPkts1024TMax Counter32,
|
|
sub10EthStatsCurrRxMbps Sub10ThroughputMbps,
|
|
sub10EthStatsCurrTxMbps Sub10ThroughputMbps,
|
|
sub10EthStatsCurrRxMbpsMin Sub10ThroughputMbps,
|
|
sub10EthStatsCurrRxMbpsMax Sub10ThroughputMbps,
|
|
sub10EthStatsCurrRxMbpsAvg Sub10ThroughputMbps,
|
|
sub10EthStatsCurrTxMbpsMin Sub10ThroughputMbps,
|
|
sub10EthStatsCurrTxMbpsMax Sub10ThroughputMbps,
|
|
sub10EthStatsCurrTxMbpsAvg Sub10ThroughputMbps,
|
|
sub10EthStatsCurrRmtRxMbpsAvg Sub10ThroughputMbps,
|
|
sub10EthStatsCurrRmtTxMbpsAvg Sub10ThroughputMbps
|
|
}
|
|
|
|
sub10EthStatsCurrRxOctets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of octets received over the Ethernet interface
|
|
since the last power cycle / reset of the unit.
|
|
|
|
For more information refer to online techical documentation at
|
|
http://www.ti.com. Product c667xDSP 'Gigabit Ethernet
|
|
Switch Subsystem for KeyStone Devices User's Guide'."
|
|
|
|
::= { sub10EthernetStatsCurrEntry 1 }
|
|
|
|
|
|
sub10EthStatsCurrRxGoodFrms OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of good frames received over the Ethernet interface
|
|
since the last power cycle / reset of the unit.
|
|
|
|
For more information refer to online techical documentation at
|
|
http://www.ti.com. Product c667xDSP 'Gigabit Ethernet
|
|
Switch Subsystem for KeyStone Devices User's Guide'."
|
|
|
|
::= { sub10EthernetStatsCurrEntry 2 }
|
|
|
|
|
|
sub10EthStatsCurrRxBcastFrms OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of broadcast frames received over the Ethernet interface
|
|
since the last power cycle / reset of the unit.
|
|
|
|
For more information refer to online techical documentation at
|
|
http://www.ti.com. Product c667xDSP 'Gigabit Ethernet
|
|
Switch Subsystem for KeyStone Devices User's Guide'."
|
|
|
|
::= { sub10EthernetStatsCurrEntry 3 }
|
|
|
|
|
|
sub10EthStatsCurrRxMcastFrms OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of multicast frames received over the Ethernet interface
|
|
since the last power cycle / reset of the unit.
|
|
|
|
For more information refer to online techical documentation at
|
|
http://www.ti.com. Product c667xDSP 'Gigabit Ethernet
|
|
Switch Subsystem for KeyStone Devices User's Guide'."
|
|
|
|
::= { sub10EthernetStatsCurrEntry 4 }
|
|
|
|
|
|
sub10EthStatsCurrRxPauseFrms OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of Pause frames received over the Ethernet interface
|
|
since the last power cycle / reset of the unit.
|
|
|
|
For more information refer to online techical documentation at
|
|
http://www.ti.com. Product c667xDSP 'Gigabit Ethernet
|
|
Switch Subsystem for KeyStone Devices User's Guide'."
|
|
|
|
::= { sub10EthernetStatsCurrEntry 5 }
|
|
|
|
|
|
sub10EthStatsCurrRxCRCErrs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of CRC errors received over the Ethernet interface
|
|
since the last power cycle / reset of the unit.
|
|
|
|
For more information refer to online techical documentation at
|
|
http://www.ti.com. Product c667xDSP 'Gigabit Ethernet
|
|
Switch Subsystem for KeyStone Devices User's Guide'."
|
|
|
|
::= { sub10EthernetStatsCurrEntry 6 }
|
|
|
|
|
|
sub10EthStatsCurrRxAlignErrs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of Alignment coding errors received over the Ethernet interface
|
|
since the last power cycle / reset of the unit.
|
|
|
|
For more information refer to online techical documentation at
|
|
http://www.ti.com. Product c667xDSP 'Gigabit Ethernet
|
|
Switch Subsystem for KeyStone Devices User's Guide'."
|
|
|
|
::= { sub10EthernetStatsCurrEntry 7 }
|
|
|
|
|
|
sub10EthStatsCurrRxOversized OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of Oversized frames received over the Ethernet interface
|
|
since the last power cycle / reset of the unit.
|
|
|
|
For more information refer to online techical documentation at
|
|
http://www.ti.com. Product c667xDSP 'Gigabit Ethernet
|
|
Switch Subsystem for KeyStone Devices User's Guide'."
|
|
|
|
::= { sub10EthernetStatsCurrEntry 8 }
|
|
|
|
|
|
sub10EthStatsCurrRxJabberFrms OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of Jabber frames received over the Ethernet interface
|
|
since the last power cycle / reset of the unit.
|
|
|
|
For more information refer to online techical documentation at
|
|
http://www.ti.com. Product c667xDSP 'Gigabit Ethernet
|
|
Switch Subsystem for KeyStone Devices User's Guide'."
|
|
|
|
::= { sub10EthernetStatsCurrEntry 9 }
|
|
|
|
|
|
sub10EthStatsCurrRxUndersized OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of Undersized frames received over the Ethernet interface
|
|
since the last power cycle / reset of the unit.
|
|
|
|
For more information refer to online techical documentation at
|
|
http://www.ti.com. Product c667xDSP 'Gigabit Ethernet
|
|
Switch Subsystem for KeyStone Devices User's Guide'."
|
|
|
|
::= { sub10EthernetStatsCurrEntry 10 }
|
|
|
|
|
|
sub10EthStatsCurrRxFragments OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of frame fragments received over the Ethernet interface
|
|
since the last power cycle / reset of the unit.
|
|
|
|
For more information refer to online techical documentation at
|
|
http://www.ti.com. Product c667xDSP 'Gigabit Ethernet
|
|
Switch Subsystem for KeyStone Devices User's Guide'."
|
|
|
|
::= { sub10EthernetStatsCurrEntry 11 }
|
|
|
|
|
|
sub10EthStatsCurrRxSOFOvrns OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of frames with Start of Frame (SOF) Overruns
|
|
received over the Ethernet interface or were dropped due to
|
|
FIFO resource limitations since the last power cycle / reset of the unit.
|
|
|
|
For more information refer to online techical documentation at
|
|
http://www.ti.com. Product c667xDSP 'Gigabit Ethernet
|
|
Switch Subsystem for KeyStone Devices User's Guide'."
|
|
|
|
::= { sub10EthernetStatsCurrEntry 12 }
|
|
|
|
|
|
sub10EthStatsCurrTxOctets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of octets transmitted over the Ethernet interface
|
|
since the last power cycle / reset of the unit.
|
|
|
|
For more information refer to online techical documentation at
|
|
http://www.ti.com. Product c667xDSP 'Gigabit Ethernet
|
|
Switch Subsystem for KeyStone Devices User's Guide'."
|
|
|
|
::= { sub10EthernetStatsCurrEntry 13 }
|
|
|
|
|
|
sub10EthStatsCurrTxGoodFrms OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of ethernet frames transmitted over the Ethernet interface
|
|
since the last power cycle / reset of the unit.
|
|
|
|
For more information refer to online techical documentation at
|
|
http://www.ti.com. Product c667xDSP 'Gigabit Ethernet
|
|
Switch Subsystem for KeyStone Devices User's Guide'."
|
|
|
|
::= { sub10EthernetStatsCurrEntry 14 }
|
|
|
|
|
|
sub10EthStatsCurrTxBcastFrms OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of broadcast frames transmitted over the Ethernet interface
|
|
since the last power cycle / reset of the unit.
|
|
|
|
For more information refer to online techical documentation at
|
|
http://www.ti.com. Product c667xDSP 'Gigabit Ethernet
|
|
Switch Subsystem for KeyStone Devices User's Guide'."
|
|
|
|
::= { sub10EthernetStatsCurrEntry 15 }
|
|
|
|
|
|
sub10EthStatsCurrTxMcastFrms OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of multicast frames transmitted over the Ethernet interface
|
|
since the last power cycle / reset of the unit.
|
|
|
|
For more information refer to online techical documentation at
|
|
http://www.ti.com. Product c667xDSP 'Gigabit Ethernet
|
|
Switch Subsystem for KeyStone Devices User's Guide'."
|
|
|
|
::= { sub10EthernetStatsCurrEntry 16 }
|
|
|
|
|
|
sub10EthStatsCurrTxPauseFrms OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of Pause frames transmitted over the Ethernet interface
|
|
since the last power cycle / reset of the unit.
|
|
|
|
For more information refer to online techical documentation at
|
|
http://www.ti.com. Product c667xDSP 'Gigabit Ethernet
|
|
Switch Subsystem for KeyStone Devices User's Guide'."
|
|
|
|
::= { sub10EthernetStatsCurrEntry 17 }
|
|
|
|
|
|
sub10EthStatsCurrTxDeferred OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of Deferred frames transmitted over the Ethernet interface
|
|
since the last power cycle / reset of the unit.
|
|
|
|
For more information refer to online techical documentation at
|
|
http://www.ti.com. Product c667xDSP 'Gigabit Ethernet
|
|
Switch Subsystem for KeyStone Devices User's Guide'."
|
|
|
|
::= { sub10EthernetStatsCurrEntry 18 }
|
|
|
|
|
|
sub10EthStatsCurrTxCollsn OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of Collision frames transmitted over the Ethernet interface
|
|
since the last power cycle / reset of the unit.
|
|
|
|
For more information refer to online techical documentation at
|
|
http://www.ti.com. Product c667xDSP 'Gigabit Ethernet
|
|
Switch Subsystem for KeyStone Devices User's Guide'."
|
|
|
|
::= { sub10EthernetStatsCurrEntry 19 }
|
|
|
|
|
|
sub10EthStatsCurrTxSnglCollsn OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of Single Collision frames transmitted over the Ethernet interface
|
|
since the last power cycle / reset of the unit.
|
|
|
|
For more information refer to online techical documentation at
|
|
http://www.ti.com. Product c667xDSP 'Gigabit Ethernet
|
|
Switch Subsystem for KeyStone Devices User's Guide'."
|
|
|
|
::= { sub10EthernetStatsCurrEntry 20 }
|
|
|
|
|
|
sub10EthStatsCurrTxMlplCollsn OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of Multiple Collision frames transmitted over the Ethernet interface
|
|
since the last power cycle / reset of the unit.
|
|
|
|
For more information refer to online techical documentation at
|
|
http://www.ti.com. Product c667xDSP 'Gigabit Ethernet
|
|
Switch Subsystem for KeyStone Devices User's Guide'."
|
|
|
|
::= { sub10EthernetStatsCurrEntry 21 }
|
|
|
|
|
|
sub10EthStatsCurrTxExsvCollsn OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of Excessive Collision for which transmission was
|
|
abandoned over the Ethernet interface since the last power
|
|
cycle / reset of the unit.
|
|
|
|
For more information refer to online techical documentation at
|
|
http://www.ti.com. Product c667xDSP 'Gigabit Ethernet
|
|
Switch Subsystem for KeyStone Devices User's Guide'."
|
|
|
|
::= { sub10EthernetStatsCurrEntry 22 }
|
|
|
|
|
|
sub10EthStatsCurrTxLtCollsn OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of Late Collision for which transmission was
|
|
abandoned over the Ethernet interface since the last power
|
|
cycle / reset of the unit.
|
|
|
|
For more information refer to online techical documentation at
|
|
http://www.ti.com. Product c667xDSP 'Gigabit Ethernet
|
|
Switch Subsystem for KeyStone Devices User's Guide'."
|
|
|
|
::= { sub10EthernetStatsCurrEntry 23 }
|
|
|
|
|
|
sub10EthStatsCurrTxCSenseErrs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of Carrier Sense Errored frames transmitted over the
|
|
Ethernet interface since the last power cycle / reset of the unit.
|
|
|
|
For more information refer to online techical documentation at
|
|
http://www.ti.com. Product c667xDSP 'Gigabit Ethernet
|
|
Switch Subsystem for KeyStone Devices User's Guide'."
|
|
|
|
::= { sub10EthernetStatsCurrEntry 24 }
|
|
|
|
|
|
sub10EthStatsCurrPkts64Octets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of 64-byte frames received and transmitted on the
|
|
Ethernet interface since the last power cycle / reset of the unit.
|
|
|
|
For more information refer to online techical documentation at
|
|
http://www.ti.com. Product c667xDSP 'Gigabit Ethernet
|
|
Switch Subsystem for KeyStone Devices User's Guide'."
|
|
|
|
::= { sub10EthernetStatsCurrEntry 25 }
|
|
|
|
|
|
sub10EthStatsCurrPkts65T127 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of frames of size 65 to 127 bytes received
|
|
and transmitted on the Ethernet interface since the last
|
|
power cycle / reset of the unit.
|
|
|
|
For more information refer to online techical documentation at
|
|
http://www.ti.com. Product c667xDSP 'Gigabit Ethernet
|
|
Switch Subsystem for KeyStone Devices User's Guide'."
|
|
|
|
::= { sub10EthernetStatsCurrEntry 26 }
|
|
|
|
|
|
sub10EthStatsCurrPkts128T255 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of frames of size 128 to 255 bytes received
|
|
and transmitted on the Ethernet interface since the last
|
|
power cycle / reset of the unit.
|
|
|
|
For more information refer to online techical documentation at
|
|
http://www.ti.com. Product c667xDSP 'Gigabit Ethernet
|
|
Switch Subsystem for KeyStone Devices User's Guide'."
|
|
|
|
::= { sub10EthernetStatsCurrEntry 27 }
|
|
|
|
|
|
sub10EthStatsCurrPkts256T511 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of frames of size 256 to 511 bytes received
|
|
and transmitted on the Ethernet interface since the last power
|
|
cycle / reset of the unit.
|
|
|
|
For more information refer to online techical documentation at
|
|
http://www.ti.com. Product c667xDSP 'Gigabit Ethernet
|
|
Switch Subsystem for KeyStone Devices User's Guide'."
|
|
|
|
::= { sub10EthernetStatsCurrEntry 28 }
|
|
|
|
|
|
sub10EthStatsCurrPkts512T1023 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of frames of size 512 to 1023 bytes received
|
|
and transmitted on the Ethernet interface since the last power
|
|
cycle / reset of the unit.
|
|
|
|
For more information refer to online techical documentation at
|
|
http://www.ti.com. Product c667xDSP 'Gigabit Ethernet
|
|
Switch Subsystem for KeyStone Devices User's Guide'."
|
|
|
|
::= { sub10EthernetStatsCurrEntry 29 }
|
|
|
|
|
|
sub10EthStatsCurrPkts1024TMax OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of frames of size 1024 to RX_MAXLEN bytes for
|
|
receive or 1024 up for transmit on the Ethernet interface
|
|
since the last power cycle / reset of the unit.
|
|
|
|
For more information refer to online techical documentation at
|
|
http://www.ti.com. Product c667xDSP 'Gigabit Ethernet
|
|
Switch Subsystem for KeyStone Devices User's Guide'."
|
|
|
|
::= { sub10EthernetStatsCurrEntry 30 }
|
|
|
|
|
|
sub10EthStatsCurrRxMbps OBJECT-TYPE
|
|
SYNTAX Sub10ThroughputMbps
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The Rx throughput in Mbps in this second."
|
|
|
|
::= { sub10EthernetStatsCurrEntry 31 }
|
|
|
|
|
|
sub10EthStatsCurrTxMbps OBJECT-TYPE
|
|
SYNTAX Sub10ThroughputMbps
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The Tx throughput in Mbps in this second."
|
|
|
|
::= { sub10EthernetStatsCurrEntry 32 }
|
|
|
|
|
|
sub10EthStatsCurrRxMbpsMin OBJECT-TYPE
|
|
SYNTAX Sub10ThroughputMbps
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The minimum Rx throughput in Mbps in the last rolling minute."
|
|
|
|
::= { sub10EthernetStatsCurrEntry 33 }
|
|
|
|
|
|
sub10EthStatsCurrRxMbpsMax OBJECT-TYPE
|
|
SYNTAX Sub10ThroughputMbps
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The maximum Rx throughput in Mbps in the last rolling minute."
|
|
|
|
::= { sub10EthernetStatsCurrEntry 34 }
|
|
|
|
|
|
sub10EthStatsCurrRxMbpsAvg OBJECT-TYPE
|
|
SYNTAX Sub10ThroughputMbps
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The average Rx throughput in Mbps in the last rolling minute."
|
|
|
|
::= { sub10EthernetStatsCurrEntry 35 }
|
|
|
|
|
|
sub10EthStatsCurrTxMbpsMin OBJECT-TYPE
|
|
SYNTAX Sub10ThroughputMbps
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The minimum Tx throughput in Mbps in the last rolling minute."
|
|
|
|
::= { sub10EthernetStatsCurrEntry 36 }
|
|
|
|
|
|
sub10EthStatsCurrTxMbpsMax OBJECT-TYPE
|
|
SYNTAX Sub10ThroughputMbps
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The maximum Tx throughput in Mbps in the last rolling minute."
|
|
|
|
::= { sub10EthernetStatsCurrEntry 37 }
|
|
|
|
|
|
sub10EthStatsCurrTxMbpsAvg OBJECT-TYPE
|
|
SYNTAX Sub10ThroughputMbps
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The average Tx throughput in Mbps in the last rolling minute."
|
|
|
|
::= { sub10EthernetStatsCurrEntry 38 }
|
|
|
|
|
|
sub10EthStatsCurrRmtRxMbpsAvg OBJECT-TYPE
|
|
SYNTAX Sub10ThroughputMbps
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The average Rx throughput of the remote unit in Mbps in the last rolling minute."
|
|
|
|
::= { sub10EthernetStatsCurrEntry 39 }
|
|
|
|
|
|
sub10EthStatsCurrRmtTxMbpsAvg OBJECT-TYPE
|
|
SYNTAX Sub10ThroughputMbps
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The average Tx throughput of the remote unit in Mbps in the last rolling minute."
|
|
|
|
::= { sub10EthernetStatsCurrEntry 40 }
|
|
|
|
|
|
-- ****************************************************************************
|
|
-- .sub10EthernetStatsHistory.sub10EthernetStats15mHistory Objects
|
|
-- ****************************************************************************
|
|
|
|
sub10EthStats15mHistIntvls OBJECT-TYPE
|
|
SYNTAX Unsigned32(0..96)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of valid table entries in sub10EthStats15mHistTable
|
|
on this system. There is one entry per 15 minute interval.
|
|
If the unit has been running for a minimum of 24 hours
|
|
and collecting valid data then the number of entries will be 96,
|
|
this represents a total maximum of 24 hours worth of data."
|
|
|
|
::= { sub10EthernetStats15mHistory 1 }
|
|
|
|
|
|
sub10EthStats15mHistTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Sub10EthStats15mHistEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table maintains a history of Ethernet statistics
|
|
based on 15 minute intervals. There are a maximum
|
|
of 96 intervals which represent 24 hours of data.
|
|
|
|
This table along with the 1m and 1d tables provide a
|
|
history of the performance of the radio interface. This
|
|
information may then be post processed and used as a
|
|
troubleshooting tool.
|
|
|
|
An entry in the table represents a 15 minute interval
|
|
where each interval is synchronised to the clock on the
|
|
hour. There are up to 96 intervals starting at 1. The
|
|
number of valid entries in the table is given by the value
|
|
of sub10EthStats15mHistIntvls of which the minimum
|
|
is 0 and the maximum is 96 therefore providing
|
|
up to a maximum of 24 hours of 15 minute interval data.
|
|
|
|
The first entry indexed by 1 represents the most recent
|
|
completed 15 minute interval. At the end of each interval
|
|
all entries of 'index' are copied into entry 'index+1'. If the
|
|
number of valid intervals is 96 then the least recent interval
|
|
entry is summarised into 24 hour stats and then discarded."
|
|
|
|
::= { sub10EthernetStats15mHistory 2 }
|
|
|
|
|
|
sub10EthStats15mHistEntry OBJECT-TYPE
|
|
SYNTAX Sub10EthStats15mHistEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in the sub10EthStats15mHistTable.
|
|
Each entry represents 15 minute of performance
|
|
management data where the first entry with index=1
|
|
is the most recent 15 minute interval and the last
|
|
entry with index=n (up to 96) is the least recent
|
|
15 minute interval. The number of valid intervals
|
|
is sub10EthStats15mHistIntvls."
|
|
INDEX { sub10EthIfIndex, sub10EthStats15mHistIntvl }
|
|
|
|
::= { sub10EthStats15mHistTable 1 }
|
|
|
|
Sub10EthStats15mHistEntry ::= SEQUENCE {
|
|
sub10EthStats15mHistIntvl Unsigned32,
|
|
sub10EthStats15mHistTime Sub10DateTime,
|
|
sub10EthStats15mHistRxOctets Counter64,
|
|
sub10EthStats15mHistRxGoodFrms Counter64,
|
|
sub10EthStats15mHistRxBcastFrms Counter64,
|
|
sub10EthStats15mHistRxMcastFrms Counter64,
|
|
sub10EthStats15mHistRxPauseFrms Counter64,
|
|
sub10EthStats15mHistRxCRCErrs Counter64,
|
|
sub10EthStats15mHistRxAlignErrs Counter64,
|
|
sub10EthStats15mHistRxOversized Counter64,
|
|
sub10EthStats15mHistRxJabberFrms Counter64,
|
|
sub10EthStats15mHistRxUndersized Counter64,
|
|
sub10EthStats15mHistRxFragments Counter64,
|
|
sub10EthStats15mHistRxSOFOvrns Counter64,
|
|
sub10EthStats15mHistTxOctets Counter64,
|
|
sub10EthStats15mHistTxGoodFrms Counter64,
|
|
sub10EthStats15mHistTxBcastFrms Counter64,
|
|
sub10EthStats15mHistTxMcastFrms Counter64,
|
|
sub10EthStats15mHistTxPauseFrms Counter64,
|
|
sub10EthStats15mHistTxDeferred Counter64,
|
|
sub10EthStats15mHistTxCollsn Counter64,
|
|
sub10EthStats15mHistTxSnglCollsn Counter64,
|
|
sub10EthStats15mHistTxMlplCollsn Counter64,
|
|
sub10EthStats15mHistTxExsvCollsn Counter64,
|
|
sub10EthStats15mHistTxLtCollsn Counter64,
|
|
sub10EthStats15mHistTxCSenseErrs Counter64,
|
|
sub10EthStats15mHistPkts64Octets Counter64,
|
|
sub10EthStats15mHistPkts65T127 Counter64,
|
|
sub10EthStats15mHistPkts128T255 Counter64,
|
|
sub10EthStats15mHistPkts256T511 Counter64,
|
|
sub10EthStats15mHistPkts512T1023 Counter64,
|
|
sub10EthStats15mHistPkts1024TMax Counter64,
|
|
sub10EthStats15mHistRxMbpsMin Sub10ThroughputMbps,
|
|
sub10EthStats15mHistRxMbpsMax Sub10ThroughputMbps,
|
|
sub10EthStats15mHistRxMbpsAvg Sub10ThroughputMbps,
|
|
sub10EthStats15mHistTxMbpsMin Sub10ThroughputMbps,
|
|
sub10EthStats15mHistTxMbpsMax Sub10ThroughputMbps,
|
|
sub10EthStats15mHistTxMbpsAvg Sub10ThroughputMbps
|
|
}
|
|
|
|
sub10EthStats15mHistIntvl OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..96)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The interval number used as an index to this
|
|
table. Interval numbers start at 1 (the most
|
|
recent 15 minute interval) and have a maximum value of 96
|
|
(the least recent 15 minute interval)."
|
|
|
|
::= { sub10EthStats15mHistEntry 1 }
|
|
|
|
|
|
sub10EthStats15mHistTime OBJECT-TYPE
|
|
SYNTAX Sub10DateTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The local system time when this 15m history entry was created.
|
|
This represents the end of the 15 minute interval for which the
|
|
associated stats with the same sub10EthStats15mHistIntvl
|
|
table index are relevant."
|
|
|
|
::= { sub10EthStats15mHistEntry 2 }
|
|
|
|
|
|
sub10EthStats15mHistRxOctets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of octets received over the Ethernet interface
|
|
in this 15m interval.
|
|
|
|
For more information refer to online techical documentation at
|
|
http://www.ti.com. Product c667xDSP 'Gigabit Ethernet
|
|
Switch Subsystem for KeyStone Devices User's Guide'."
|
|
|
|
::= { sub10EthStats15mHistEntry 3 }
|
|
|
|
|
|
sub10EthStats15mHistRxGoodFrms OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of good frames received over the Ethernet interface
|
|
in this 15m interval.
|
|
|
|
For more information refer to online techical documentation at
|
|
http://www.ti.com. Product c667xDSP 'Gigabit Ethernet
|
|
Switch Subsystem for KeyStone Devices User's Guide'."
|
|
|
|
::= { sub10EthStats15mHistEntry 4 }
|
|
|
|
|
|
sub10EthStats15mHistRxBcastFrms OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of broadcast frames received over the Ethernet interface
|
|
in this 15m interval.
|
|
|
|
For more information refer to online techical documentation at
|
|
http://www.ti.com. Product c667xDSP 'Gigabit Ethernet
|
|
Switch Subsystem for KeyStone Devices User's Guide'."
|
|
|
|
::= { sub10EthStats15mHistEntry 5 }
|
|
|
|
|
|
sub10EthStats15mHistRxMcastFrms OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of multicast frames received over the Ethernet interface
|
|
in this 15m interval.
|
|
|
|
For more information refer to online techical documentation at
|
|
http://www.ti.com. Product c667xDSP 'Gigabit Ethernet
|
|
Switch Subsystem for KeyStone Devices User's Guide'."
|
|
|
|
::= { sub10EthStats15mHistEntry 6 }
|
|
|
|
|
|
sub10EthStats15mHistRxPauseFrms OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of Pause frames received over the Ethernet interface
|
|
in this 15m interval.
|
|
|
|
For more information refer to online techical documentation at
|
|
http://www.ti.com. Product c667xDSP 'Gigabit Ethernet
|
|
Switch Subsystem for KeyStone Devices User's Guide'."
|
|
|
|
::= { sub10EthStats15mHistEntry 7 }
|
|
|
|
|
|
sub10EthStats15mHistRxCRCErrs OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of CRC errors received over the Ethernet interface
|
|
in this 15m interval.
|
|
|
|
For more information refer to online techical documentation at
|
|
http://www.ti.com. Product c667xDSP 'Gigabit Ethernet
|
|
Switch Subsystem for KeyStone Devices User's Guide'."
|
|
|
|
::= { sub10EthStats15mHistEntry 8 }
|
|
|
|
|
|
sub10EthStats15mHistRxAlignErrs OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of Alignment coding errors received over the Ethernet interface
|
|
in this 15m interval.
|
|
|
|
For more information refer to online techical documentation at
|
|
http://www.ti.com. Product c667xDSP 'Gigabit Ethernet
|
|
Switch Subsystem for KeyStone Devices User's Guide'."
|
|
|
|
::= { sub10EthStats15mHistEntry 9 }
|
|
|
|
|
|
sub10EthStats15mHistRxOversized OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of Oversized frames received over the Ethernet interface
|
|
in this 15m interval.
|
|
|
|
For more information refer to online techical documentation at
|
|
http://www.ti.com. Product c667xDSP 'Gigabit Ethernet
|
|
Switch Subsystem for KeyStone Devices User's Guide'."
|
|
|
|
::= { sub10EthStats15mHistEntry 10 }
|
|
|
|
|
|
sub10EthStats15mHistRxJabberFrms OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of Jabber frames received over the Ethernet interface
|
|
in this 15m interval.
|
|
|
|
For more information refer to online techical documentation at
|
|
http://www.ti.com. Product c667xDSP 'Gigabit Ethernet
|
|
Switch Subsystem for KeyStone Devices User's Guide'."
|
|
|
|
::= { sub10EthStats15mHistEntry 11 }
|
|
|
|
|
|
sub10EthStats15mHistRxUndersized OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of Undersized frames received over the Ethernet interface
|
|
in this 15m interval.
|
|
|
|
For more information refer to online techical documentation at
|
|
http://www.ti.com. Product c667xDSP 'Gigabit Ethernet
|
|
Switch Subsystem for KeyStone Devices User's Guide'."
|
|
|
|
::= { sub10EthStats15mHistEntry 12 }
|
|
|
|
|
|
sub10EthStats15mHistRxFragments OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of frame fragments received over the Ethernet interface
|
|
in this 15m interval.
|
|
|
|
For more information refer to online techical documentation at
|
|
http://www.ti.com. Product c667xDSP 'Gigabit Ethernet
|
|
Switch Subsystem for KeyStone Devices User's Guide'."
|
|
|
|
::= { sub10EthStats15mHistEntry 13 }
|
|
|
|
|
|
sub10EthStats15mHistRxSOFOvrns OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of frames with Start of Frame (SOF) Overruns
|
|
received over the Ethernet interface or were dropped due to
|
|
FIFO resource limitations in this 15m interval.
|
|
|
|
For more information refer to online techical documentation at
|
|
http://www.ti.com. Product c667xDSP 'Gigabit Ethernet
|
|
Switch Subsystem for KeyStone Devices User's Guide'."
|
|
|
|
::= { sub10EthStats15mHistEntry 14 }
|
|
|
|
|
|
sub10EthStats15mHistTxOctets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of octets transmitted over the Ethernet interface
|
|
in this 15m interval.
|
|
|
|
For more information refer to online techical documentation at
|
|
http://www.ti.com. Product c667xDSP 'Gigabit Ethernet
|
|
Switch Subsystem for KeyStone Devices User's Guide'."
|
|
|
|
::= { sub10EthStats15mHistEntry 15 }
|
|
|
|
|
|
sub10EthStats15mHistTxGoodFrms OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of ethernet frames transmitted over the Ethernet interface
|
|
in this 15m interval.
|
|
|
|
For more information refer to online techical documentation at
|
|
http://www.ti.com. Product c667xDSP 'Gigabit Ethernet
|
|
Switch Subsystem for KeyStone Devices User's Guide'."
|
|
|
|
::= { sub10EthStats15mHistEntry 16 }
|
|
|
|
|
|
sub10EthStats15mHistTxBcastFrms OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of broadcast frames transmitted over the Ethernet interface
|
|
in this 15m interval.
|
|
|
|
For more information refer to online techical documentation at
|
|
http://www.ti.com. Product c667xDSP 'Gigabit Ethernet
|
|
Switch Subsystem for KeyStone Devices User's Guide'."
|
|
|
|
::= { sub10EthStats15mHistEntry 17 }
|
|
|
|
|
|
sub10EthStats15mHistTxMcastFrms OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of multicast frames transmitted over the Ethernet interface
|
|
in this 15m interval.
|
|
|
|
For more information refer to online techical documentation at
|
|
http://www.ti.com. Product c667xDSP 'Gigabit Ethernet
|
|
Switch Subsystem for KeyStone Devices User's Guide'."
|
|
|
|
::= { sub10EthStats15mHistEntry 18 }
|
|
|
|
|
|
sub10EthStats15mHistTxPauseFrms OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of Pause frames transmitted over the Ethernet interface
|
|
in this 15m interval.
|
|
|
|
For more information refer to online techical documentation at
|
|
http://www.ti.com. Product c667xDSP 'Gigabit Ethernet
|
|
Switch Subsystem for KeyStone Devices User's Guide'."
|
|
|
|
::= { sub10EthStats15mHistEntry 19 }
|
|
|
|
|
|
sub10EthStats15mHistTxDeferred OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of Deferred frames transmitted over the Ethernet interface
|
|
in this 15m interval.
|
|
|
|
For more information refer to online techical documentation at
|
|
http://www.ti.com. Product c667xDSP 'Gigabit Ethernet
|
|
Switch Subsystem for KeyStone Devices User's Guide'."
|
|
|
|
::= { sub10EthStats15mHistEntry 20 }
|
|
|
|
|
|
sub10EthStats15mHistTxCollsn OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of Collision frames transmitted over the Ethernet interface
|
|
in this 15m interval.
|
|
|
|
For more information refer to online techical documentation at
|
|
http://www.ti.com. Product c667xDSP 'Gigabit Ethernet
|
|
Switch Subsystem for KeyStone Devices User's Guide'."
|
|
|
|
::= { sub10EthStats15mHistEntry 21 }
|
|
|
|
|
|
sub10EthStats15mHistTxSnglCollsn OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of Single Collision frames transmitted over the Ethernet interface
|
|
in this 15m interval.
|
|
|
|
For more information refer to online techical documentation at
|
|
http://www.ti.com. Product c667xDSP 'Gigabit Ethernet
|
|
Switch Subsystem for KeyStone Devices User's Guide'."
|
|
|
|
::= { sub10EthStats15mHistEntry 22 }
|
|
|
|
|
|
sub10EthStats15mHistTxMlplCollsn OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of Multiple Collision frames transmitted over the Ethernet interface
|
|
in this 15m interval.
|
|
|
|
For more information refer to online techical documentation at
|
|
http://www.ti.com. Product c667xDSP 'Gigabit Ethernet
|
|
Switch Subsystem for KeyStone Devices User's Guide'."
|
|
|
|
::= { sub10EthStats15mHistEntry 23 }
|
|
|
|
|
|
sub10EthStats15mHistTxExsvCollsn OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of Excessive Collision for which transmission was
|
|
abandoned over the Ethernet interface in this 1 minute interval.
|
|
5
|
|
For more information refer to online techical documentation at
|
|
http://www.ti.com. Product c667xDSP 'Gigabit Ethernet
|
|
Switch Subsystem for KeyStone Devices User's Guide'."
|
|
|
|
::= { sub10EthStats15mHistEntry 24 }
|
|
|
|
|
|
sub10EthStats15mHistTxLtCollsn OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of Late Collision for which transmission was
|
|
abandoned over the Ethernet interface in this 15 minute interval.
|
|
|
|
For more information refer to online techical documentation at
|
|
http://www.ti.com. Product c667xDSP 'Gigabit Ethernet
|
|
Switch Subsystem for KeyStone Devices User's Guide'."
|
|
|
|
::= { sub10EthStats15mHistEntry 25 }
|
|
|
|
|
|
sub10EthStats15mHistTxCSenseErrs OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of Carrier Sense Errored frames transmitted over the
|
|
Ethernet interface in this 15m interval.
|
|
|
|
For more information refer to online techical documentation at
|
|
http://www.ti.com. Product c667xDSP 'Gigabit Ethernet
|
|
Switch Subsystem for KeyStone Devices User's Guide'."
|
|
|
|
::= { sub10EthStats15mHistEntry 26 }
|
|
|
|
|
|
sub10EthStats15mHistPkts64Octets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of 64-byte frames received and transmitted on the
|
|
Ethernet interface in this 15m interval.
|
|
|
|
For more information refer to online techical documentation at
|
|
http://www.ti.com. Product c667xDSP 'Gigabit Ethernet
|
|
Switch Subsystem for KeyStone Devices User's Guide'."
|
|
|
|
::= { sub10EthStats15mHistEntry 27 }
|
|
|
|
|
|
sub10EthStats15mHistPkts65T127 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of frames of size 65 to 127 bytes received
|
|
and transmitted on the Ethernet interface in this 15 minute interval.
|
|
|
|
For more information refer to online techical documentation at
|
|
http://www.ti.com. Product c667xDSP 'Gigabit Ethernet
|
|
Switch Subsystem for KeyStone Devices User's Guide'."
|
|
|
|
::= { sub10EthStats15mHistEntry 28 }
|
|
|
|
|
|
sub10EthStats15mHistPkts128T255 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of frames of size 128 to 255 bytes received
|
|
and transmitted on the Ethernet interface in this 15 minute interval.
|
|
|
|
For more information refer to online techical documentation at
|
|
http://www.ti.com. Product c667xDSP 'Gigabit Ethernet
|
|
Switch Subsystem for KeyStone Devices User's Guide'."
|
|
|
|
::= { sub10EthStats15mHistEntry 29 }
|
|
|
|
|
|
sub10EthStats15mHistPkts256T511 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of frames of size 256 to 511 bytes received
|
|
and transmitted on the Ethernet interface in this 15 minute interval.
|
|
|
|
For more information refer to online techical documentation at
|
|
http://www.ti.com. Product c667xDSP 'Gigabit Ethernet
|
|
Switch Subsystem for KeyStone Devices User's Guide'."
|
|
|
|
::= { sub10EthStats15mHistEntry 30 }
|
|
|
|
|
|
sub10EthStats15mHistPkts512T1023 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of frames of size 512 to 1023 bytes received
|
|
and transmitted on the Ethernet interface in this 15 minute interval.
|
|
|
|
For more information refer to online techical documentation at
|
|
http://www.ti.com. Product c667xDSP 'Gigabit Ethernet
|
|
Switch Subsystem for KeyStone Devices User's Guide'."
|
|
|
|
::= { sub10EthStats15mHistEntry 31 }
|
|
|
|
|
|
sub10EthStats15mHistPkts1024TMax OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of frames of size 1024 to RX_MAXLEN bytes for
|
|
receive or 1024 up for transmit on the Ethernet interface
|
|
in this 15m interval.
|
|
|
|
For more information refer to online techical documentation at
|
|
http://www.ti.com. Product c667xDSP 'Gigabit Ethernet
|
|
Switch Subsystem for KeyStone Devices User's Guide'."
|
|
|
|
::= { sub10EthStats15mHistEntry 32 }
|
|
|
|
|
|
sub10EthStats15mHistRxMbpsMin OBJECT-TYPE
|
|
SYNTAX Sub10ThroughputMbps
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The minimum Rx throughput in Mbps in this 15 minute interval."
|
|
|
|
::= { sub10EthStats15mHistEntry 33 }
|
|
|
|
|
|
sub10EthStats15mHistRxMbpsMax OBJECT-TYPE
|
|
SYNTAX Sub10ThroughputMbps
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The maximum Rx throughput in Mbps in this 15 minute interval."
|
|
|
|
::= { sub10EthStats15mHistEntry 34 }
|
|
|
|
|
|
sub10EthStats15mHistRxMbpsAvg OBJECT-TYPE
|
|
SYNTAX Sub10ThroughputMbps
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The average Rx throughput in Mbps in this 15 minute interval."
|
|
|
|
::= { sub10EthStats15mHistEntry 35 }
|
|
|
|
|
|
sub10EthStats15mHistTxMbpsMin OBJECT-TYPE
|
|
SYNTAX Sub10ThroughputMbps
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The minimum Tx throughput in Mbps in this 15 minute interval."
|
|
|
|
::= { sub10EthStats15mHistEntry 36 }
|
|
|
|
|
|
sub10EthStats15mHistTxMbpsMax OBJECT-TYPE
|
|
SYNTAX Sub10ThroughputMbps
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The maximum Tx throughput in Mbps in this 15 minute interval."
|
|
|
|
::= { sub10EthStats15mHistEntry 37 }
|
|
|
|
|
|
sub10EthStats15mHistTxMbpsAvg OBJECT-TYPE
|
|
SYNTAX Sub10ThroughputMbps
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The average Tx throughput in Mbps in this 15 minute interval."
|
|
|
|
::= { sub10EthStats15mHistEntry 38 }
|
|
|
|
|
|
-- ****************************************************************************
|
|
-- .sub10EthernetStatsHistory.sub10EthStats1dHistory Objects
|
|
-- ****************************************************************************
|
|
|
|
sub10EthStats1dHistIntvls OBJECT-TYPE
|
|
SYNTAX Unsigned32(0..30)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of valid table entries in sub10EthStats1dHistTable
|
|
on this system. There is one entry per 1 day interval.
|
|
|
|
If the unit has been running for a minimum of 30 days
|
|
and collecting valid data then the number of entries will be 30,
|
|
this represents a total maximum of 30 days worth of data."
|
|
|
|
::= { sub10EthStats1dHistory 1 }
|
|
|
|
|
|
sub10EthStats1dHistTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Sub10EthStats1dHistEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table maintains a history of Radio statistics
|
|
based on 1 day intervals. There are a maximum
|
|
of 30 intervals which represent 30 days of data.
|
|
|
|
This table along with the 1m and 15m tables provide a
|
|
history of the performance of the radio interface. This
|
|
information may then be post processed and used as a
|
|
troubleshooting tool.
|
|
|
|
An entry in the table represents a 1 day interval
|
|
where each interval is synchronised to the clock on the
|
|
hour. There are up to 30 intervals starting at 1. The
|
|
number of valid entries in the table is given by the value
|
|
of sub10EthStats1dHistIntvls of which the minimum
|
|
is 0 and the maximum is 30 therefore providing
|
|
up to a maximum of 30 days of 1 day interval data.
|
|
|
|
The first entry indexed by 1 represents the most recent
|
|
completed 1 day interval. At the end of each interval
|
|
all entries of 'index' are copied into entry 'index+1'. If the
|
|
number of valid intervals is 30 then the least recent interval
|
|
entry is discarded."
|
|
|
|
::= { sub10EthStats1dHistory 2 }
|
|
|
|
|
|
sub10EthStats1dHistEntry OBJECT-TYPE
|
|
SYNTAX Sub10EthStats1dHistEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in the sub10EthStats1dHistTable.
|
|
Each entry represents 1 day of performance
|
|
management data where the first entry with index=1
|
|
is the most recent 1 day interval and the last
|
|
entry with index=n (up to 30) is the least recent
|
|
1 day interval.
|
|
|
|
The number of valid intervals is given by the
|
|
value of sub10EthStats1dHistIntvls."
|
|
INDEX { sub10EthIfIndex, sub10EthStats1dHistIntvl }
|
|
|
|
::= { sub10EthStats1dHistTable 1 }
|
|
|
|
Sub10EthStats1dHistEntry ::= SEQUENCE {
|
|
sub10EthStats1dHistIntvl Unsigned32,
|
|
sub10EthStats1dHistTime Sub10DateTime,
|
|
sub10EthStats1dHistRxOctets Counter64,
|
|
sub10EthStats1dHistRxGoodFrms Counter64,
|
|
sub10EthStats1dHistRxBcastFrms Counter64,
|
|
sub10EthStats1dHistRxMcastFrms Counter64,
|
|
sub10EthStats1dHistRxPauseFrms Counter64,
|
|
sub10EthStats1dHistRxCRCErrs Counter64,
|
|
sub10EthStats1dHistRxAlignErrs Counter64,
|
|
sub10EthStats1dHistRxOversized Counter64,
|
|
sub10EthStats1dHistRxJabberFrms Counter64,
|
|
sub10EthStats1dHistRxUndersized Counter64,
|
|
sub10EthStats1dHistRxFragments Counter64,
|
|
sub10EthStats1dHistRxSOFOvrns Counter64,
|
|
sub10EthStats1dHistTxOctets Counter64,
|
|
sub10EthStats1dHistTxGoodFrms Counter64,
|
|
sub10EthStats1dHistTxBcastFrms Counter64,
|
|
sub10EthStats1dHistTxMcastFrms Counter64,
|
|
sub10EthStats1dHistTxPauseFrms Counter64,
|
|
sub10EthStats1dHistTxDeferred Counter64,
|
|
sub10EthStats1dHistTxCollsn Counter64,
|
|
sub10EthStats1dHistTxSnglCollsn Counter64,
|
|
sub10EthStats1dHistTxMlplCollsn Counter64,
|
|
sub10EthStats1dHistTxExsvCollsn Counter64,
|
|
sub10EthStats1dHistTxLtCollsn Counter64,
|
|
sub10EthStats1dHistTxCSenseErrs Counter64,
|
|
sub10EthStats1dHistPkts64Octets Counter64,
|
|
sub10EthStats1dHistPkts65T127 Counter64,
|
|
sub10EthStats1dHistPkts128T255 Counter64,
|
|
sub10EthStats1dHistPkts256T511 Counter64,
|
|
sub10EthStats1dHistPkts512T1023 Counter64,
|
|
sub10EthStats1dHistPkts1024TMax Counter64,
|
|
sub10EthStats1dHistRxMbpsMin Sub10ThroughputMbps,
|
|
sub10EthStats1dHistRxMbpsMax Sub10ThroughputMbps,
|
|
sub10EthStats1dHistRxMbpsAvg Sub10ThroughputMbps,
|
|
sub10EthStats1dHistTxMbpsMin Sub10ThroughputMbps,
|
|
sub10EthStats1dHistTxMbpsMax Sub10ThroughputMbps,
|
|
sub10EthStats1dHistTxMbpsAvg Sub10ThroughputMbps
|
|
}
|
|
|
|
sub10EthStats1dHistIntvl OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..30)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The interval number used as an index to this
|
|
table. Interval numbers start at 1 (the most
|
|
recent 1 day interval) and have a maximum value of 30
|
|
(the least recent 1 day interval)."
|
|
|
|
::= { sub10EthStats1dHistEntry 1 }
|
|
|
|
|
|
sub10EthStats1dHistTime OBJECT-TYPE
|
|
SYNTAX Sub10DateTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The local system time when this 1d history entry was created.
|
|
This represents the end of the 1 day interval for which the
|
|
associated stats with the same sub10EthStats1dHistIntvl
|
|
table index are relevant."
|
|
|
|
::= { sub10EthStats1dHistEntry 2 }
|
|
|
|
|
|
sub10EthStats1dHistRxOctets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of octets received over the Ethernet interface
|
|
in this 1 day interval.
|
|
|
|
For more information refer to online techical documentation at
|
|
http://www.ti.com. Product c667xDSP 'Gigabit Ethernet
|
|
Switch Subsystem for KeyStone Devices User's Guide'."
|
|
|
|
::= { sub10EthStats1dHistEntry 3 }
|
|
|
|
|
|
sub10EthStats1dHistRxGoodFrms OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of good frames received over the Ethernet interface
|
|
in this 1 day interval.
|
|
|
|
For more information refer to online techical documentation at
|
|
http://www.ti.com. Product c667xDSP 'Gigabit Ethernet
|
|
Switch Subsystem for KeyStone Devices User's Guide'."
|
|
|
|
::= { sub10EthStats1dHistEntry 4 }
|
|
|
|
|
|
sub10EthStats1dHistRxBcastFrms OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of broadcast frames received over the Ethernet interface
|
|
in this 1 day interval.
|
|
|
|
For more information refer to online techical documentation at
|
|
http://www.ti.com. Product c667xDSP 'Gigabit Ethernet
|
|
Switch Subsystem for KeyStone Devices User's Guide'."
|
|
|
|
::= { sub10EthStats1dHistEntry 5 }
|
|
|
|
|
|
sub10EthStats1dHistRxMcastFrms OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of multicast frames received over the Ethernet interface
|
|
in this 1 day interval.
|
|
|
|
For more information refer to online techical documentation at
|
|
http://www.ti.com. Product c667xDSP 'Gigabit Ethernet
|
|
Switch Subsystem for KeyStone Devices User's Guide'."
|
|
|
|
::= { sub10EthStats1dHistEntry 6 }
|
|
|
|
|
|
sub10EthStats1dHistRxPauseFrms OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of Pause frames received over the Ethernet interface
|
|
in this 1 day interval.
|
|
|
|
For more information refer to online techical documentation at
|
|
http://www.ti.com. Product c667xDSP 'Gigabit Ethernet
|
|
Switch Subsystem for KeyStone Devices User's Guide'."
|
|
|
|
::= { sub10EthStats1dHistEntry 7 }
|
|
|
|
|
|
sub10EthStats1dHistRxCRCErrs OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of CRC errors received over the Ethernet interface
|
|
in this 1 day interval.
|
|
|
|
For more information refer to online techical documentation at
|
|
http://www.ti.com. Product c667xDSP 'Gigabit Ethernet
|
|
Switch Subsystem for KeyStone Devices User's Guide'."
|
|
|
|
::= { sub10EthStats1dHistEntry 8 }
|
|
|
|
|
|
sub10EthStats1dHistRxAlignErrs OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of Alignment coding errors received over the Ethernet interface
|
|
in this 1 day interval.
|
|
|
|
For more information refer to online techical documentation at
|
|
http://www.ti.com. Product c667xDSP 'Gigabit Ethernet
|
|
Switch Subsystem for KeyStone Devices User's Guide'."
|
|
|
|
::= { sub10EthStats1dHistEntry 9 }
|
|
|
|
|
|
sub10EthStats1dHistRxOversized OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of Oversized frames received over the Ethernet interface
|
|
in this 1 day interval.
|
|
|
|
For more information refer to online techical documentation at
|
|
http://www.ti.com. Product c667xDSP 'Gigabit Ethernet
|
|
Switch Subsystem for KeyStone Devices User's Guide'."
|
|
|
|
::= { sub10EthStats1dHistEntry 10 }
|
|
|
|
|
|
sub10EthStats1dHistRxJabberFrms OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of Jabber frames received over the Ethernet interface
|
|
in this 1 day interval.
|
|
|
|
For more information refer to online techical documentation at
|
|
http://www.ti.com. Product c667xDSP 'Gigabit Ethernet
|
|
Switch Subsystem for KeyStone Devices User's Guide'."
|
|
|
|
::= { sub10EthStats1dHistEntry 11 }
|
|
|
|
|
|
sub10EthStats1dHistRxUndersized OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of Undersized frames received over the Ethernet interface
|
|
in this 1 day interval.
|
|
|
|
For more information refer to online techical documentation at
|
|
http://www.ti.com. Product c667xDSP 'Gigabit Ethernet
|
|
Switch Subsystem for KeyStone Devices User's Guide'."
|
|
|
|
::= { sub10EthStats1dHistEntry 12 }
|
|
|
|
|
|
sub10EthStats1dHistRxFragments OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of frame fragments received over the Ethernet interface
|
|
in this 1 day interval.
|
|
|
|
For more information refer to online techical documentation at
|
|
http://www.ti.com. Product c667xDSP 'Gigabit Ethernet
|
|
Switch Subsystem for KeyStone Devices User's Guide'."
|
|
|
|
::= { sub10EthStats1dHistEntry 13 }
|
|
|
|
|
|
sub10EthStats1dHistRxSOFOvrns OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of frames with Start of Frame (SOF) Overruns
|
|
received over the Ethernet interface or were dropped due to
|
|
FIFO resource limitations in this 1 day interval.
|
|
|
|
For more information refer to online techical documentation at
|
|
http://www.ti.com. Product c667xDSP 'Gigabit Ethernet
|
|
Switch Subsystem for KeyStone Devices User's Guide'."
|
|
|
|
::= { sub10EthStats1dHistEntry 14 }
|
|
|
|
|
|
sub10EthStats1dHistTxOctets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of octets transmitted over the Ethernet interface
|
|
in this 1 day interval.
|
|
|
|
For more information refer to online techical documentation at
|
|
http://www.ti.com. Product c667xDSP 'Gigabit Ethernet
|
|
Switch Subsystem for KeyStone Devices User's Guide'."
|
|
|
|
::= { sub10EthStats1dHistEntry 15 }
|
|
|
|
|
|
sub10EthStats1dHistTxGoodFrms OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of ethernet frames transmitted over the Ethernet interface
|
|
in this 1 day interval.
|
|
|
|
For more information refer to online techical documentation at
|
|
http://www.ti.com. Product c667xDSP 'Gigabit Ethernet
|
|
Switch Subsystem for KeyStone Devices User's Guide'."
|
|
|
|
::= { sub10EthStats1dHistEntry 16 }
|
|
|
|
|
|
sub10EthStats1dHistTxBcastFrms OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of broadcast frames transmitted over the Ethernet interface
|
|
in this 1 day interval.
|
|
|
|
For more information refer to online techical documentation at
|
|
http://www.ti.com. Product c667xDSP 'Gigabit Ethernet
|
|
Switch Subsystem for KeyStone Devices User's Guide'."
|
|
|
|
::= { sub10EthStats1dHistEntry 17 }
|
|
|
|
|
|
sub10EthStats1dHistTxMcastFrms OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of multicast frames transmitted over the Ethernet interface
|
|
in this 1 day interval.
|
|
|
|
For more information refer to online techical documentation at
|
|
http://www.ti.com. Product c667xDSP 'Gigabit Ethernet
|
|
Switch Subsystem for KeyStone Devices User's Guide'."
|
|
|
|
::= { sub10EthStats1dHistEntry 18 }
|
|
|
|
|
|
sub10EthStats1dHistTxPauseFrms OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of Pause frames transmitted over the Ethernet interface
|
|
in this 1 day interval.
|
|
|
|
For more information refer to online techical documentation at
|
|
http://www.ti.com. Product c667xDSP 'Gigabit Ethernet
|
|
Switch Subsystem for KeyStone Devices User's Guide'."
|
|
|
|
::= { sub10EthStats1dHistEntry 19 }
|
|
|
|
|
|
sub10EthStats1dHistTxDeferred OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of Deferred frames transmitted over the Ethernet interface
|
|
in this 1 day interval.
|
|
|
|
For more information refer to online techical documentation at
|
|
http://www.ti.com. Product c667xDSP 'Gigabit Ethernet
|
|
Switch Subsystem for KeyStone Devices User's Guide'."
|
|
|
|
::= { sub10EthStats1dHistEntry 20 }
|
|
|
|
|
|
sub10EthStats1dHistTxCollsn OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of Collision frames transmitted over the Ethernet interface
|
|
in this 1 day interval.
|
|
|
|
For more information refer to online techical documentation at
|
|
http://www.ti.com. Product c667xDSP 'Gigabit Ethernet
|
|
Switch Subsystem for KeyStone Devices User's Guide'."
|
|
|
|
::= { sub10EthStats1dHistEntry 21 }
|
|
|
|
|
|
sub10EthStats1dHistTxSnglCollsn OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of Single Collision frames transmitted over the Ethernet interface
|
|
in this 1 day interval.
|
|
|
|
For more information refer to online techical documentation at
|
|
http://www.ti.com. Product c667xDSP 'Gigabit Ethernet
|
|
Switch Subsystem for KeyStone Devices User's Guide'."
|
|
|
|
::= { sub10EthStats1dHistEntry 22 }
|
|
|
|
|
|
sub10EthStats1dHistTxMlplCollsn OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of Multiple Collision frames transmitted over the Ethernet interface
|
|
in this 1 day interval.
|
|
|
|
For more information refer to online techical documentation at
|
|
http://www.ti.com. Product c667xDSP 'Gigabit Ethernet
|
|
Switch Subsystem for KeyStone Devices User's Guide'."
|
|
|
|
::= { sub10EthStats1dHistEntry 23 }
|
|
|
|
|
|
sub10EthStats1dHistTxExsvCollsn OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of Excessive Collision for which transmission was
|
|
abandoned over the Ethernet interface in this 1 day interval.
|
|
|
|
For more information refer to online techical documentation at
|
|
http://www.ti.com. Product c667xDSP 'Gigabit Ethernet
|
|
Switch Subsystem for KeyStone Devices User's Guide'."
|
|
|
|
::= { sub10EthStats1dHistEntry 24 }
|
|
|
|
|
|
sub10EthStats1dHistTxLtCollsn OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of Late Collision for which transmission was
|
|
abandoned over the Ethernet interface in this 1 day interval.
|
|
|
|
For more information refer to online techical documentation at
|
|
http://www.ti.com. Product c667xDSP 'Gigabit Ethernet
|
|
Switch Subsystem for KeyStone Devices User's Guide'."
|
|
|
|
::= { sub10EthStats1dHistEntry 25 }
|
|
|
|
|
|
sub10EthStats1dHistTxCSenseErrs OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of Carrier Sense Errored frames transmitted over the
|
|
Ethernet interface in this 1 day interval.
|
|
|
|
For more information refer to online techical documentation at
|
|
http://www.ti.com. Product c667xDSP 'Gigabit Ethernet
|
|
Switch Subsystem for KeyStone Devices User's Guide'."
|
|
|
|
::= { sub10EthStats1dHistEntry 26 }
|
|
|
|
|
|
sub10EthStats1dHistPkts64Octets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of 64-byte frames received and transmitted on the
|
|
Ethernet interface in this 1 day interval.
|
|
|
|
For more information refer to online techical documentation at
|
|
http://www.ti.com. Product c667xDSP 'Gigabit Ethernet
|
|
Switch Subsystem for KeyStone Devices User's Guide'."
|
|
|
|
::= { sub10EthStats1dHistEntry 27 }
|
|
|
|
|
|
sub10EthStats1dHistPkts65T127 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of frames of size 65 to 127 bytes received
|
|
and transmitted on the Ethernet interface in this 1 day interval.
|
|
|
|
For more information refer to online techical documentation at
|
|
http://www.ti.com. Product c667xDSP 'Gigabit Ethernet
|
|
Switch Subsystem for KeyStone Devices User's Guide'."
|
|
|
|
::= { sub10EthStats1dHistEntry 28 }
|
|
|
|
|
|
sub10EthStats1dHistPkts128T255 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of frames of size 128 to 255 bytes received
|
|
and transmitted on the Ethernet interface in this 1 day interval.
|
|
|
|
For more information refer to online techical documentation at
|
|
http://www.ti.com. Product c667xDSP 'Gigabit Ethernet
|
|
Switch Subsystem for KeyStone Devices User's Guide'."
|
|
|
|
::= { sub10EthStats1dHistEntry 29 }
|
|
|
|
|
|
sub10EthStats1dHistPkts256T511 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of frames of size 256 to 511 bytes received
|
|
and transmitted on the Ethernet interface in this 1 day interval.
|
|
|
|
For more information refer to online techical documentation at
|
|
http://www.ti.com. Product c667xDSP 'Gigabit Ethernet
|
|
Switch Subsystem for KeyStone Devices User's Guide'."
|
|
|
|
::= { sub10EthStats1dHistEntry 30 }
|
|
|
|
|
|
sub10EthStats1dHistPkts512T1023 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of frames of size 512 to 1023 bytes received
|
|
and transmitted on the Ethernet interface in this 1 day interval.
|
|
|
|
For more information refer to online techical documentation at
|
|
http://www.ti.com. Product c667xDSP 'Gigabit Ethernet
|
|
Switch Subsystem for KeyStone Devices User's Guide'."
|
|
|
|
::= { sub10EthStats1dHistEntry 31 }
|
|
|
|
|
|
sub10EthStats1dHistPkts1024TMax OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of frames of size 1024 to RX_MAXLEN bytes for
|
|
receive or 1024 up for transmit on the Ethernet interface
|
|
in this 1 day interval.
|
|
|
|
For more information refer to online techical documentation at
|
|
http://www.ti.com. Product c667xDSP 'Gigabit Ethernet
|
|
Switch Subsystem for KeyStone Devices User's Guide'."
|
|
|
|
::= { sub10EthStats1dHistEntry 32 }
|
|
|
|
|
|
sub10EthStats1dHistRxMbpsMin OBJECT-TYPE
|
|
SYNTAX Sub10ThroughputMbps
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The minimum Rx throughput in Mbps in this 15 minute interval."
|
|
|
|
::= { sub10EthStats1dHistEntry 33 }
|
|
|
|
|
|
sub10EthStats1dHistRxMbpsMax OBJECT-TYPE
|
|
SYNTAX Sub10ThroughputMbps
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The maximum Rx throughput in Mbps in this 15 minute interval."
|
|
|
|
::= { sub10EthStats1dHistEntry 34 }
|
|
|
|
|
|
sub10EthStats1dHistRxMbpsAvg OBJECT-TYPE
|
|
SYNTAX Sub10ThroughputMbps
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The average Rx throughput in Mbps in this 1 day interval."
|
|
|
|
::= { sub10EthStats1dHistEntry 35 }
|
|
|
|
|
|
sub10EthStats1dHistTxMbpsMin OBJECT-TYPE
|
|
SYNTAX Sub10ThroughputMbps
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The minimum Tx throughput in Mbps in this 1 day interval."
|
|
|
|
::= { sub10EthStats1dHistEntry 36 }
|
|
|
|
|
|
sub10EthStats1dHistTxMbpsMax OBJECT-TYPE
|
|
SYNTAX Sub10ThroughputMbps
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The maximum Tx throughput in Mbps in this 1 day interval."
|
|
|
|
::= { sub10EthStats1dHistEntry 37 }
|
|
|
|
|
|
sub10EthStats1dHistTxMbpsAvg OBJECT-TYPE
|
|
SYNTAX Sub10ThroughputMbps
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The average Tx throughput in Mbps in this 1 day interval."
|
|
|
|
::= { sub10EthStats1dHistEntry 38 }
|
|
|
|
|
|
-- ****************************************************************************
|
|
-- .sub10RadioStatus.sub10RadioLocalStatus Objects
|
|
-- ****************************************************************************
|
|
|
|
sub10RadioLclLinkStatus OBJECT-TYPE
|
|
SYNTAX Sub10RadioLinkState
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The status of the local radio link."
|
|
|
|
::= { sub10RadioLocalStatus 1 }
|
|
|
|
|
|
sub10RadioLclTxPower OBJECT-TYPE
|
|
SYNTAX Integer32(-30..30)
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The current transmit power of the local radio link,
|
|
measured in dBm."
|
|
DEFVAL { 0 }
|
|
|
|
::= { sub10RadioLocalStatus 2 }
|
|
|
|
|
|
sub10RadioLclRxPower OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The current receive power of the local radio link,
|
|
measured in dBm."
|
|
DEFVAL { "0" }
|
|
|
|
::= { sub10RadioLocalStatus 3 }
|
|
|
|
|
|
sub10RadioLclVectErr OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The current vector error of the local radio link,
|
|
measured in dB."
|
|
DEFVAL { "0" }
|
|
|
|
::= { sub10RadioLocalStatus 4 }
|
|
|
|
|
|
sub10RadioLclLnkLoss OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The current link loss of the local radio link,
|
|
measured in dB."
|
|
DEFVAL { "0" }
|
|
|
|
::= { sub10RadioLocalStatus 5 }
|
|
|
|
|
|
sub10RadioLclAlignmentMode OBJECT-TYPE
|
|
SYNTAX Sub10AlignmentMode
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Alignment mode is modeAlignment(1) if the alignment / reset cap
|
|
has been removed for > 5sec otherwise modeNormal(0). The alignment
|
|
mode is managed using sub10RadioMgmtAlignmentMode."
|
|
|
|
::= { sub10RadioLocalStatus 6 }
|
|
|
|
|
|
sub10RadioLclDataRate OBJECT-TYPE
|
|
SYNTAX Sub10RadioDataRate
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The maximum data rate of the Airside interface."
|
|
|
|
::= { sub10RadioLocalStatus 7 }
|
|
|
|
|
|
sub10RadioLclMWUType OBJECT-TYPE
|
|
SYNTAX Sub10MWUType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The local MWU type"
|
|
|
|
::= { sub10RadioLocalStatus 8 }
|
|
|
|
|
|
sub10RadioLclAFER OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The Air Frame Error Ratio in the last second. This
|
|
is the % of lost air frames based on the UFEC count in
|
|
the previous second divided by the
|
|
expected Air Frame Rate(AFR) in 1 second."
|
|
|
|
::= { sub10RadioLocalStatus 9 }
|
|
|
|
|
|
sub10RadioLclRxModulationMode OBJECT-TYPE
|
|
SYNTAX Sub10ModulationMode
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The current Receive Modulation Mode on the local unit."
|
|
|
|
::= { sub10RadioLocalStatus 10 }
|
|
|
|
|
|
sub10RadioLclTxModulationMode OBJECT-TYPE
|
|
SYNTAX Sub10ModulationMode
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The current Transmit Modulation Mode on the local unit."
|
|
|
|
::= { sub10RadioLocalStatus 11 }
|
|
|
|
|
|
-- ****************************************************************************
|
|
-- .sub10RadioStatus.sub10RadioRemoteStatus Objects
|
|
-- ****************************************************************************
|
|
|
|
sub10RadioRmtLinkStatus OBJECT-TYPE
|
|
SYNTAX Sub10RadioLinkState
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The status of the remote radio link."
|
|
|
|
::= { sub10RadioRemoteStatus 1 }
|
|
|
|
|
|
sub10RadioRmtTxPower OBJECT-TYPE
|
|
SYNTAX Integer32(-100..100)
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The current transmit power of the remote radio link,
|
|
measured in dBm."
|
|
DEFVAL { 0 }
|
|
|
|
::= { sub10RadioRemoteStatus 2 }
|
|
|
|
|
|
sub10RadioRmtRxPower OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The current receive power of the remote radio link,
|
|
measured in dBm."
|
|
DEFVAL { "0" }
|
|
|
|
::= { sub10RadioRemoteStatus 3 }
|
|
|
|
|
|
sub10RadioRmtVectErr OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The current vector error of the remote radio link,
|
|
measured in dB."
|
|
DEFVAL { "0" }
|
|
|
|
::= { sub10RadioRemoteStatus 4 }
|
|
|
|
|
|
sub10RadioRmtLnkLoss OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The current link loss of the remote radio link,
|
|
measured in dB."
|
|
DEFVAL { "0" }
|
|
|
|
::= { sub10RadioRemoteStatus 5 }
|
|
|
|
|
|
sub10RadioRmtAlignmentMode OBJECT-TYPE
|
|
SYNTAX Sub10AlignmentMode
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The remote radio unit's Alignment mode.
|
|
Alignment mode is modeAlignment(1) if the alignment / reset cap
|
|
has been removed for > 5sec otherwise modeNormal(0)."
|
|
|
|
::= { sub10RadioRemoteStatus 7 }
|
|
|
|
|
|
sub10RadioRmtAFER OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The remote unit Air Frame Error Ratio in this second. This
|
|
is the % of lost air frames based on the UFEC count in
|
|
the previous second divided by the
|
|
expected Air Frame Rate(AFR) in 1 second."
|
|
|
|
::= { sub10RadioRemoteStatus 8 }
|
|
|
|
|
|
-- ****************************************************************************
|
|
-- .sub10Radio.sub10RadioMgmt Objects
|
|
-- ****************************************************************************
|
|
|
|
sub10RadioMgmtTxPowerLimit OBJECT-TYPE
|
|
SYNTAX Sub10TxPowerLimit
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The configured transmit power of radio link.
|
|
IMPORTANT: This object is controlled by transaction management.
|
|
Any changes to this object must be transactionally acknowledged
|
|
following a successful set thus protecting against loss of
|
|
communication with the unit. To acknowledge the transaction
|
|
set the object sub10UnitMgmtTransaction to transactionCommit(2)."
|
|
DEFVAL { txPowerLimitNone }
|
|
|
|
::= { sub10RadioMgmt 1 }
|
|
|
|
|
|
sub10RadioMgmtTxRxFreq OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
e250Tx71250Rx81250(0),
|
|
e250Tx71500Rx81500(1),
|
|
e250Tx71750Rx81750(2),
|
|
e250Tx72000Rx82000(3),
|
|
e250Tx72250Rx82250(4),
|
|
e250Tx72500Rx82500(5),
|
|
e250Tx72750Rx82750(6),
|
|
e250Tx73000Rx83000(7),
|
|
e250Tx73250Rx83250(8),
|
|
e250Tx73500Rx83500(9),
|
|
e250Tx73750Rx83750(10),
|
|
e250Tx74000Rx84000(11),
|
|
e250Tx74250Rx84250(12),
|
|
e250Tx74500Rx84500(13),
|
|
e250Tx74750Rx84750(14),
|
|
e250Tx75000Rx85000(15),
|
|
e250Tx75250Rx85250(16),
|
|
e250Tx75500Rx85500(17),
|
|
e250Tx75750Rx85750(18),
|
|
e500Tx72375Rx82375(19),
|
|
e500Tx72625Rx82625(20),
|
|
e500Tx72875Rx82875(21),
|
|
e500Tx73125Rx83125(22),
|
|
e500Tx73375Rx83375(23),
|
|
e500Tx73625Rx83625(24),
|
|
e500Tx73875Rx83875(25),
|
|
e500Tx74125Rx84125(26),
|
|
e500Tx74375Rx84375(27),
|
|
e500Tx74625Rx84625(28),
|
|
v500Tx58500Rx61500(29),
|
|
v500Tx58500Rx62000(30),
|
|
v500Tx58500Rx62500(31),
|
|
v500Tx59000Rx61500(32),
|
|
v500Tx59000Rx62000(33),
|
|
v500Tx59000Rx62500(34),
|
|
v500Tx59500Rx61500(35),
|
|
v500Tx59500Rx62000(36),
|
|
v500Tx59500Rx62500(37)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The configured TX/RX frequency pairs of radio link. Each enumerated option
|
|
represents the TX and RX frequency pair settings in MHz.
|
|
Options are available for E-Band at channel width 250MHz and 500MHz
|
|
and E-Band channel width 500MHz.
|
|
|
|
IMPORTANT: This object is controlled by transaction management.
|
|
Any changes to this object must be transactionally acknowledged
|
|
following a successful set thus protecting against loss of
|
|
communication with the unit. To acknowledge the transaction
|
|
set the object sub10UnitMgmtTransaction to transactionCommit(2)."
|
|
DEFVAL { v500Tx59500Rx62000 }
|
|
|
|
::= { sub10RadioMgmt 2 }
|
|
|
|
|
|
sub10RadioMgmtAPCMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
apcModeDisabled(0),
|
|
apcModeVariable(1),
|
|
apcModeFixed(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Automatic Transmit Power Control. The initial setting of transmit
|
|
power used is defined by sub10RadioMgmtTxPower. If sub10RadioMgmtAPCMode
|
|
is enabled then the transmit power may then vary according to the
|
|
RSSI measured from the remote end of the link. The actual transmit power is
|
|
readable in sub10RadioLclTxPower at the local end and sub10RadioRmtTxPower
|
|
at the remote end of the link.
|
|
|
|
IMPORTANT: This object is controlled by transaction management.
|
|
Any changes to this object must be transactionally acknowledged
|
|
following a successful set thus protecting against loss of
|
|
communication with the unit. To acknowledge the transaction
|
|
set the object sub10UnitMgmtTransaction to transactionCommit(2)."
|
|
DEFVAL { apcModeDisabled }
|
|
|
|
::= { sub10RadioMgmt 3 }
|
|
|
|
|
|
sub10RadioMgmtModulationMode OBJECT-TYPE
|
|
SYNTAX Sub10ModulationMode
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Set the highest order Modulation Mode attempted by Adaptive Modulation.
|
|
IMPORTANT: This object is controlled by transaction management.
|
|
Any changes to this object must be transactionally acknowledged
|
|
following a successful set thus protecting against loss of
|
|
communication with the unit. To acknowledge the transaction
|
|
set the object sub10UnitMgmtTransaction to transactionCommit(2)."
|
|
DEFVAL { mode8psk }
|
|
|
|
::= { sub10RadioMgmt 4 }
|
|
|
|
|
|
sub10RadioMgmtAmod OBJECT-TYPE
|
|
SYNTAX Sub10State
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Adaptive Modulation mode."
|
|
DEFVAL { stateDisabled }
|
|
|
|
::= { sub10RadioMgmt 5 }
|
|
|
|
|
|
sub10RadioMgmtAlignmentMode OBJECT-TYPE
|
|
SYNTAX Sub10AlignmentMode
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Alignment mode is modeAlignment(1) if the alignment / reset cap
|
|
has been removed for > 5sec otherwise modeNormal(0). The alignment
|
|
mode can be manually changed by setting this object."
|
|
|
|
::= { sub10RadioMgmt 6 }
|
|
|
|
|
|
sub10RadioMgmtMWUChannelWidth OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
channelWidth250(0),
|
|
channelWidth500(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "MWU Channel width.
|
|
IMPORTANT: This object is controlled by transaction management.
|
|
Any changes to this object must be transactionally acknowledged
|
|
following a successful set thus protecting against loss of
|
|
communication with the unit. To acknowledge the transaction
|
|
set the object sub10UnitMgmtTransaction to transactionCommit(2)."
|
|
DEFVAL { channelWidth500 }
|
|
|
|
::= { sub10RadioMgmt 8 }
|
|
|
|
|
|
sub10RadioMgmtDataRate OBJECT-TYPE
|
|
SYNTAX Sub10RadioDataRate
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The maximum data rate of the Airside interface up to the licensed value."
|
|
|
|
::= { sub10RadioMgmt 10 }
|
|
|
|
|
|
-- ****************************************************************************
|
|
-- .sub10RadioMgmt.sub10RadioMgmtStats Objects
|
|
-- ****************************************************************************
|
|
|
|
sub10RadioMgmtStats1dPersist OBJECT-TYPE
|
|
SYNTAX Sub10State
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "If set to 'stateEnabled(1) the sub10RadioStats1dHistTable objects
|
|
are stored and read in on startup. This makes the history
|
|
non-volatile across unit resets."
|
|
DEFVAL { stateEnabled }
|
|
|
|
::= { sub10RadioMgmtStats 1 }
|
|
|
|
|
|
sub10RadioMgmtStatsActiveTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Sub10RadioMgmtStatsActiveEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table maintains an entry for each Radio
|
|
statistic that is enabled and active."
|
|
|
|
::= { sub10RadioMgmtStats 4 }
|
|
|
|
|
|
sub10RadioMgmtStatsActiveEntry OBJECT-TYPE
|
|
SYNTAX Sub10RadioMgmtStatsActiveEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in the sub10RadioMgmtStatsActiveTable.
|
|
Each entry represents an object instance of Radio
|
|
stats and it's current state."
|
|
INDEX { sub10RadioMgmtStatsActiveIndex }
|
|
|
|
::= { sub10RadioMgmtStatsActiveTable 1 }
|
|
|
|
Sub10RadioMgmtStatsActiveEntry ::= SEQUENCE {
|
|
sub10RadioMgmtStatsActiveIndex Unsigned32,
|
|
sub10RadioMgmtStatsActiveName OCTET STRING,
|
|
sub10RadioMgmtStatsActiveState Sub10State
|
|
}
|
|
|
|
sub10RadioMgmtStatsActiveIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..29)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The number of Radio stats objects
|
|
used as an index to this table."
|
|
|
|
::= { sub10RadioMgmtStatsActiveEntry 1 }
|
|
|
|
|
|
sub10RadioMgmtStatsActiveName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..22))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The stats object name. This is the name of the
|
|
ethernet stats object in the sub10RadioStatsCurrent
|
|
group."
|
|
|
|
::= { sub10RadioMgmtStatsActiveEntry 2 }
|
|
|
|
|
|
sub10RadioMgmtStatsActiveState OBJECT-TYPE
|
|
SYNTAX Sub10State
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "If set to 'enabled' the statistic is active."
|
|
DEFVAL { stateEnabled }
|
|
|
|
::= { sub10RadioMgmtStatsActiveEntry 3 }
|
|
|
|
|
|
-- ****************************************************************************
|
|
-- .sub10Radio.sub10RadioStats Objects
|
|
-- ****************************************************************************
|
|
|
|
sub10RadioStatsTimeElapsed OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The time that has elapsed from the beginning
|
|
of the statistical measurement period.
|
|
|
|
This is normally time from just after the last reboot time
|
|
when the statistics module begins it's calculations.
|
|
|
|
If, for some reason, such as an adjustment in the
|
|
system's time-of-day clock, the current interval
|
|
exceeds the maximum value, the agent will return
|
|
the maximum value."
|
|
|
|
::= { sub10RadioStats 1 }
|
|
|
|
|
|
-- ****************************************************************************
|
|
-- .sub10RadioStats.sub10RadioStatsCurrent Objects
|
|
-- ****************************************************************************
|
|
|
|
sub10RadioStatsCurrTxPowerMin OBJECT-TYPE
|
|
SYNTAX Integer32(-100..100)
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The minimum value that the transmit power of the local radio
|
|
link measured over the previous rolling 60 seconds."
|
|
DEFVAL { 0 }
|
|
|
|
::= { sub10RadioStatsCurrent 1 }
|
|
|
|
|
|
sub10RadioStatsCurrTxPowerMax OBJECT-TYPE
|
|
SYNTAX Integer32(-100..100)
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The maximum value that the transmit power of the local radio
|
|
link measured over the previous rolling 60 seconds."
|
|
DEFVAL { 0 }
|
|
|
|
::= { sub10RadioStatsCurrent 2 }
|
|
|
|
|
|
sub10RadioStatsCurrTxPowerAvg OBJECT-TYPE
|
|
SYNTAX Integer32(-100..100)
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The average value of the transmit power of the local radio
|
|
link measured over the previous rolling 60 seconds."
|
|
DEFVAL { 0 }
|
|
|
|
::= { sub10RadioStatsCurrent 3 }
|
|
|
|
|
|
sub10RadioStatsCurrRxPowerMin OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The minimum value that the receive power of the local radio
|
|
link measured over the previous rolling 60 seconds."
|
|
DEFVAL { "0" }
|
|
|
|
::= { sub10RadioStatsCurrent 4 }
|
|
|
|
|
|
sub10RadioStatsCurrRxPowerMax OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The maximum value that the receive power of the local radio
|
|
link measured over the previous rolling 60 seconds."
|
|
DEFVAL { "0" }
|
|
|
|
::= { sub10RadioStatsCurrent 5 }
|
|
|
|
|
|
sub10RadioStatsCurrRxPowerAvg OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The average value of the receive power of the local radio
|
|
link measured over the previous rolling 60 seconds."
|
|
DEFVAL { "0" }
|
|
|
|
::= { sub10RadioStatsCurrent 6 }
|
|
|
|
|
|
sub10RadioStatsCurrVectErrMin OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The minimum value that the vector error of the local radio
|
|
link measured over the previous rolling 60 seconds."
|
|
DEFVAL { "0" }
|
|
|
|
::= { sub10RadioStatsCurrent 7 }
|
|
|
|
|
|
sub10RadioStatsCurrVectErrMax OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The maximum value that the vector error of the local radio
|
|
link measured over the previous rolling 60 seconds."
|
|
DEFVAL { "0" }
|
|
|
|
::= { sub10RadioStatsCurrent 8 }
|
|
|
|
|
|
sub10RadioStatsCurrVectErrAvg OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The average value of the vector error of the local radio
|
|
link measured over the previous rolling 60 seconds."
|
|
DEFVAL { "0" }
|
|
|
|
::= { sub10RadioStatsCurrent 9 }
|
|
|
|
|
|
sub10RadioStatsCurrLnkLossMin OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The minimum value that the link loss of the local radio
|
|
link measured over the previous rolling 60 seconds."
|
|
|
|
::= { sub10RadioStatsCurrent 10 }
|
|
|
|
|
|
sub10RadioStatsCurrLnkLossMax OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The maximum value that the link loss of the local radio
|
|
link measured over the previous rolling 60 seconds."
|
|
|
|
::= { sub10RadioStatsCurrent 11 }
|
|
|
|
|
|
sub10RadioStatsCurrLnkLossAvg OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The average value of the link loss of the local radio
|
|
link measured over the previous rolling 60 seconds."
|
|
|
|
::= { sub10RadioStatsCurrent 12 }
|
|
|
|
|
|
sub10RadioStatsCurrRxFrms OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of Airside frames received over the Radio interface.
|
|
This is irrespective of whether the Airside frame transmitted contained
|
|
any ethernet data.
|
|
|
|
Set to zero on unit reset."
|
|
|
|
::= { sub10RadioStatsCurrent 13 }
|
|
|
|
|
|
sub10RadioStatsCurrTxFrms OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of Airside frames transmitted over the Radio interface.
|
|
This is irrespective of whether the Airside frame transmitted contained
|
|
any ethernet data.
|
|
|
|
Set to zero on unit reset."
|
|
|
|
::= { sub10RadioStatsCurrent 14 }
|
|
|
|
|
|
sub10RadioStatsCurrRxPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of Ethernet packets received over the Radio interface.
|
|
This includes all packets whether destined for the management
|
|
sub-system on this unit or to be sent direct to the Ethernet interface.
|
|
|
|
Set to zero on unit reset."
|
|
|
|
::= { sub10RadioStatsCurrent 15 }
|
|
|
|
|
|
sub10RadioStatsCurrTxPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of Ethernet packets transmitted over the Radio interface
|
|
which originated from the Ethernet interface. This does not include
|
|
packets originating from the management sub-system.
|
|
|
|
Set to zero on unit reset."
|
|
|
|
::= { sub10RadioStatsCurrent 16 }
|
|
|
|
|
|
sub10RadioStatsCurrRxMgmtPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of Ethernet packets received over the Radio interface
|
|
and which are destined for the management sub-system on this unit.
|
|
|
|
Set to zero on unit reset."
|
|
|
|
::= { sub10RadioStatsCurrent 17 }
|
|
|
|
|
|
sub10RadioStatsCurrTxMgmtPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of Ethernet packets transmitted over the Radio interface
|
|
which originated from the management sub-system. This does not include
|
|
packets originating from the Ethernet interface.
|
|
|
|
Set to zero on unit reset."
|
|
|
|
::= { sub10RadioStatsCurrent 18 }
|
|
|
|
|
|
sub10RadioStatsCurrRxBadFrms OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The count of bad frames detected on the
|
|
receive side of the Radio interface. A bad
|
|
frame could be caused by any one of the following
|
|
detected errors:
|
|
|
|
UFEC Error
|
|
Header CRC Error
|
|
Frame CRC Error
|
|
Bad header
|
|
|
|
Set to zero on unit reset."
|
|
|
|
::= { sub10RadioStatsCurrent 19 }
|
|
|
|
|
|
sub10RadioStatsCurrMWUTempMin OBJECT-TYPE
|
|
SYNTAX Integer32(-100..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The minimum MWU temperature measured over the previous rolling 60 seconds."
|
|
DEFVAL { 0 }
|
|
|
|
::= { sub10RadioStatsCurrent 24 }
|
|
|
|
|
|
sub10RadioStatsCurrMWUTempMax OBJECT-TYPE
|
|
SYNTAX Integer32(-100..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The maximum MWU temperature measured over the previous rolling 60 seconds."
|
|
DEFVAL { 0 }
|
|
|
|
::= { sub10RadioStatsCurrent 25 }
|
|
|
|
|
|
sub10RadioStatsCurrMWUTempAvg OBJECT-TYPE
|
|
SYNTAX Integer32(-100..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The average MWU temperature measured over the previous rolling 60 seconds."
|
|
DEFVAL { 0 }
|
|
|
|
::= { sub10RadioStatsCurrent 26 }
|
|
|
|
|
|
sub10RadioStatsCurrQPSKTo8PSK OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number transitions of Modulation Mode configuration
|
|
from QPSK to 8PSK since unit reboot."
|
|
|
|
::= { sub10RadioStatsCurrent 27 }
|
|
|
|
|
|
sub10RadioStatsCurr8PSKToQPSK OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number transitions of Modulation Mode configuration
|
|
from 8PSK to QPSK since unit reboot."
|
|
|
|
::= { sub10RadioStatsCurrent 28 }
|
|
|
|
|
|
sub10RadioStatsCurrAFERMin OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The minimum AFER (Air Frame Error Ratio) in the previous rolling 60 seconds.
|
|
See sub10RadioLclAFER."
|
|
|
|
::= { sub10RadioStatsCurrent 29 }
|
|
|
|
|
|
sub10RadioStatsCurrAFERMax OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The maximum AFER (Air Frame Error Ratio) in the previous rolling 60 seconds.
|
|
See sub10RadioLclAFER."
|
|
|
|
::= { sub10RadioStatsCurrent 30 }
|
|
|
|
|
|
sub10RadioStatsCurrAFERAvg OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The average AFER (Air Frame Error Ratio) in the previous rolling 60 seconds.
|
|
See sub10RadioLclAFER."
|
|
|
|
::= { sub10RadioStatsCurrent 31 }
|
|
|
|
|
|
sub10RadioStatsCurrRmtTxPowerAvg OBJECT-TYPE
|
|
SYNTAX Integer32(-100..100)
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The average value of the transmit power of the remote radio
|
|
link measured over the previous rolling 60 seconds."
|
|
DEFVAL { 0 }
|
|
|
|
::= { sub10RadioStatsCurrent 32 }
|
|
|
|
|
|
sub10RadioStatsCurrRmtRxPowerAvg OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The average value of the receive power of the remote radio
|
|
link measured over the previous rolling 60 seconds."
|
|
DEFVAL { "0" }
|
|
|
|
::= { sub10RadioStatsCurrent 33 }
|
|
|
|
|
|
sub10RadioStatsCurrRmtVectErrAvg OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The average value of the vector error of the remote radio
|
|
link measured over the previous rolling 60 seconds."
|
|
DEFVAL { "0" }
|
|
|
|
::= { sub10RadioStatsCurrent 34 }
|
|
|
|
|
|
sub10RadioStatsCurrRmtLnkLossAvg OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The average value of the link loss of the remote radio
|
|
link measured over the previous rolling 60 seconds."
|
|
|
|
::= { sub10RadioStatsCurrent 35 }
|
|
|
|
|
|
sub10RadioStatsCurrRmtMWUTempAvg OBJECT-TYPE
|
|
SYNTAX Integer32(-100..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The average MWU temperature of the remote unit measured over the previous rolling 60 seconds."
|
|
DEFVAL { 0 }
|
|
|
|
::= { sub10RadioStatsCurrent 36 }
|
|
|
|
|
|
sub10RadioStatsCurrRmtAFERAvg OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The average AFER (Air Frame Error Ratio) of the remote unit in the previous rolling 60 seconds."
|
|
|
|
::= { sub10RadioStatsCurrent 37 }
|
|
|
|
|
|
sub10RadioStatsCurrRxQPSK OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The time in seconds that Rx modulation mode has been in QPSK since last reboot."
|
|
|
|
::= { sub10RadioStatsCurrent 38 }
|
|
|
|
|
|
sub10RadioStatsCurrRx8PSK OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The time in seconds that Rx modulation mode has been in 8PSK since last reboot."
|
|
|
|
::= { sub10RadioStatsCurrent 39 }
|
|
|
|
|
|
sub10RadioStatsCurrTxQPSK OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The time in seconds that Txmodulation mode has been in QPSK since last reboot."
|
|
|
|
::= { sub10RadioStatsCurrent 40 }
|
|
|
|
|
|
sub10RadioStatsCurrTx8PSK OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The time in seconds that Tx modulation mode has been in 8PSK since last reboot."
|
|
|
|
::= { sub10RadioStatsCurrent 41 }
|
|
|
|
|
|
-- ****************************************************************************
|
|
-- .sub10RadioStatsHistory.sub10RadioStats1mHistory Objects
|
|
-- ****************************************************************************
|
|
|
|
sub10RadioStats1mHistIntvls OBJECT-TYPE
|
|
SYNTAX Unsigned32(0..60)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of valid table entries in sub10RadioStats1mHistTable
|
|
on this system. There is one entry per 1 minute interval.
|
|
If the unit has been running for a minimum of 15 minutes
|
|
and collecting valid data then the number of entries will be 15,
|
|
this represents a total maximum of 5 minutes worth of data."
|
|
|
|
::= { sub10RadioStats1mHistory 1 }
|
|
|
|
|
|
sub10RadioStats1mHistTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Sub10RadioStats1mHistEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table maintains a history of Radio statistics
|
|
based on 1 minute intervals. There are a maximum
|
|
of 60 intervals which represent 1 hour of data.
|
|
|
|
This table along with the 15m and 1d tables provide a
|
|
history of the performance of the radio interface. This
|
|
information may then be post processed and used as a
|
|
troubleshooting tool.
|
|
|
|
An entry in the table represents a 1 minute interval
|
|
where each interval is synchronised to the clock on the
|
|
hour. There are up to 60 intervals starting at 1. The
|
|
number of valid entries in the table is given by the value
|
|
of sub10RadioStats1mHistIntvls of which the minimum
|
|
is 0 and the maximum is 60 therefore providing
|
|
up to a maximum of 60 minutes of 1 minute interval data.
|
|
|
|
The first entry indexed by 1 represents the most recent
|
|
completed 1 minute interval. At the end of each interval
|
|
all entries of 'index' are copied into entry 'index+1'. If the
|
|
number of valid intervals is at least 15 then these 15 intervals
|
|
are summarised into 15 minutes stats. At the end of a 60 minute
|
|
period the least recent interval is discarded to accomodate
|
|
the next minute interval."
|
|
|
|
::= { sub10RadioStats1mHistory 2 }
|
|
|
|
|
|
sub10RadioStats1mHistEntry OBJECT-TYPE
|
|
SYNTAX Sub10RadioStats1mHistEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in the sub10RadioStats1mHistTable.
|
|
Each entry represents 1 minute of performance
|
|
management data where the first entry with index=1
|
|
is the most recent 1 minute interval and the last
|
|
entry with index=n (up to 60) is the least recent
|
|
1 minute interval.
|
|
|
|
The number of valid intervals is given by the
|
|
value of sub10RadioStats1mHistIntvls."
|
|
INDEX { sub10RadioStats1mHistIntvl }
|
|
|
|
::= { sub10RadioStats1mHistTable 1 }
|
|
|
|
Sub10RadioStats1mHistEntry ::= SEQUENCE {
|
|
sub10RadioStats1mHistIntvl Unsigned32,
|
|
sub10RadioStats1mHistTime Sub10DateTime,
|
|
sub10RadioStats1mHistTxPowerMin Integer32,
|
|
sub10RadioStats1mHistTxPowerMax Integer32,
|
|
sub10RadioStats1mHistTxPowerAvg Integer32,
|
|
sub10RadioStats1mHistRxPowerMin OCTET STRING,
|
|
sub10RadioStats1mHistRxPowerMax OCTET STRING,
|
|
sub10RadioStats1mHistRxPowerAvg OCTET STRING,
|
|
sub10RadioStats1mHistVectErrMin OCTET STRING,
|
|
sub10RadioStats1mHistVectErrMax OCTET STRING,
|
|
sub10RadioStats1mHistVectErrAvg OCTET STRING,
|
|
sub10RadioStats1mHistLnkLossMin OCTET STRING,
|
|
sub10RadioStats1mHistLnkLossMax OCTET STRING,
|
|
sub10RadioStats1mHistLnkLossAvg OCTET STRING,
|
|
sub10RadioStats1mHistMWUTempMin Integer32,
|
|
sub10RadioStats1mHistMWUTempMax Integer32,
|
|
sub10RadioStats1mHistMWUTempAvg Integer32,
|
|
sub10RadioStats1mHistRxFrms Counter64,
|
|
sub10RadioStats1mHistTxFrms Counter64,
|
|
sub10RadioStats1mHistRxPkts Counter64,
|
|
sub10RadioStats1mHistTxPkts Counter64,
|
|
sub10RadioStats1mHistRxMgmtPkts Counter64,
|
|
sub10RadioStats1mHistTxMgmtPkts Counter64,
|
|
sub10RadioStats1mHistRxBadFrms Counter64,
|
|
sub10RadioStats1mHistQPSKTo8PSK Counter32,
|
|
sub10RadioStats1mHist8PSKToQPSK Counter32,
|
|
sub10RadioStats1mHistAFERMin OCTET STRING,
|
|
sub10RadioStats1mHistAFERMax OCTET STRING,
|
|
sub10RadioStats1mHistAFERAvg OCTET STRING,
|
|
sub10RadioStats1mHistRxQPSK Counter32,
|
|
sub10RadioStats1mHistRx8PSK Counter32,
|
|
sub10RadioStats1mHistTxQPSK Counter32,
|
|
sub10RadioStats1mHistTx8PSK Counter32
|
|
}
|
|
|
|
sub10RadioStats1mHistIntvl OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..60)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The interval number used as an index to this
|
|
table. Interval numbers start at 1 (the most
|
|
recent 1 minute interval) and have a maximum value of 60
|
|
(the least recent 1 minute interval)."
|
|
|
|
::= { sub10RadioStats1mHistEntry 1 }
|
|
|
|
|
|
sub10RadioStats1mHistTime OBJECT-TYPE
|
|
SYNTAX Sub10DateTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The local system time when this 1m history entry was created.
|
|
This represents the end of the 1 minute interval for which the
|
|
associated stats with the same sub10RadioStats1mHistIntvl
|
|
table index are relevant."
|
|
|
|
::= { sub10RadioStats1mHistEntry 2 }
|
|
|
|
|
|
sub10RadioStats1mHistTxPowerMin OBJECT-TYPE
|
|
SYNTAX Integer32(-100..100)
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The minimum value that the transmit power of the local radio
|
|
link has reached in this minute interval, measured in dBm."
|
|
DEFVAL { 0 }
|
|
|
|
::= { sub10RadioStats1mHistEntry 3 }
|
|
|
|
|
|
sub10RadioStats1mHistTxPowerMax OBJECT-TYPE
|
|
SYNTAX Integer32(-100..100)
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The maximum value that the transmit power of the local radio
|
|
link has reached in this minute interval, measured in dBm."
|
|
DEFVAL { 0 }
|
|
|
|
::= { sub10RadioStats1mHistEntry 4 }
|
|
|
|
|
|
sub10RadioStats1mHistTxPowerAvg OBJECT-TYPE
|
|
SYNTAX Integer32(-100..100)
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The average value that the transmit power of the local radio
|
|
link has reached in this minute interval, measured in dBm."
|
|
DEFVAL { 0 }
|
|
|
|
::= { sub10RadioStats1mHistEntry 5 }
|
|
|
|
|
|
sub10RadioStats1mHistRxPowerMin OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The minimum value that the receive power of the local radio
|
|
link has reached in this minute interval, measured in dBm."
|
|
DEFVAL { "0" }
|
|
|
|
::= { sub10RadioStats1mHistEntry 6 }
|
|
|
|
|
|
sub10RadioStats1mHistRxPowerMax OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The maximum value that the receive power of the local radio
|
|
link has reached in this minute interval, measured in dBm."
|
|
DEFVAL { "0" }
|
|
|
|
::= { sub10RadioStats1mHistEntry 7 }
|
|
|
|
|
|
sub10RadioStats1mHistRxPowerAvg OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The average value that the receive power of the local radio
|
|
link has reached in this minute interval, measured in dBm."
|
|
DEFVAL { "0" }
|
|
|
|
::= { sub10RadioStats1mHistEntry 8 }
|
|
|
|
|
|
sub10RadioStats1mHistVectErrMin OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The minimum value that the vector error of the local radio
|
|
link has reached in this minute interval, measured in dB."
|
|
DEFVAL { "0" }
|
|
|
|
::= { sub10RadioStats1mHistEntry 9 }
|
|
|
|
|
|
sub10RadioStats1mHistVectErrMax OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The maximum value that the vector error of the local radio
|
|
link has reached in this minute interval, measured in dB."
|
|
DEFVAL { "0" }
|
|
|
|
::= { sub10RadioStats1mHistEntry 10 }
|
|
|
|
|
|
sub10RadioStats1mHistVectErrAvg OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The average value that the vector error of the local radio
|
|
link has reached in this minute interval, measured in dB."
|
|
DEFVAL { "0" }
|
|
|
|
::= { sub10RadioStats1mHistEntry 11 }
|
|
|
|
|
|
sub10RadioStats1mHistLnkLossMin OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The minimum value that the link loss of the local radio
|
|
link has reached in this minute interval, measured in dB."
|
|
|
|
::= { sub10RadioStats1mHistEntry 12 }
|
|
|
|
|
|
sub10RadioStats1mHistLnkLossMax OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The maximum value that the link loss of the local radio
|
|
link has reached in this minute interval, measured in dB."
|
|
|
|
::= { sub10RadioStats1mHistEntry 13 }
|
|
|
|
|
|
sub10RadioStats1mHistLnkLossAvg OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The average value that the link loss of the local radio
|
|
link has reached in this minute interval, measured in dB."
|
|
|
|
::= { sub10RadioStats1mHistEntry 14 }
|
|
|
|
|
|
sub10RadioStats1mHistMWUTempMin OBJECT-TYPE
|
|
SYNTAX Integer32(-100..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The minimum MWU temperature measured in this minute interval."
|
|
DEFVAL { 0 }
|
|
|
|
::= { sub10RadioStats1mHistEntry 15 }
|
|
|
|
|
|
sub10RadioStats1mHistMWUTempMax OBJECT-TYPE
|
|
SYNTAX Integer32(-100..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The maximum MWU temperature measured in this minute interval."
|
|
DEFVAL { 0 }
|
|
|
|
::= { sub10RadioStats1mHistEntry 16 }
|
|
|
|
|
|
sub10RadioStats1mHistMWUTempAvg OBJECT-TYPE
|
|
SYNTAX Integer32(-100..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The average MWU temperature measured in this minute interval."
|
|
DEFVAL { 0 }
|
|
|
|
::= { sub10RadioStats1mHistEntry 17 }
|
|
|
|
|
|
sub10RadioStats1mHistRxFrms OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of Airside frames received over the Radio interface in this minute.
|
|
This is irrespective of whether the Airside frame transmitted contained
|
|
any ethernet data."
|
|
|
|
::= { sub10RadioStats1mHistEntry 22 }
|
|
|
|
|
|
sub10RadioStats1mHistTxFrms OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of Airside frames transmitted over the Radio interface in this minute.
|
|
This is irrespective of whether the Airside frame transmitted contained
|
|
any ethernet data."
|
|
|
|
::= { sub10RadioStats1mHistEntry 23 }
|
|
|
|
|
|
sub10RadioStats1mHistRxPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of Ethernet packets received over the Radio interface in this minute.
|
|
This includes all packets whether destined for the management
|
|
sub-system on this unit or to be sent direct to the Ethernet interface."
|
|
|
|
::= { sub10RadioStats1mHistEntry 24 }
|
|
|
|
|
|
sub10RadioStats1mHistTxPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of Ethernet packets transmitted over the Radio interface
|
|
which originated from the Ethernet interface in this minute. This does not include
|
|
packets originating from the management sub-system."
|
|
|
|
::= { sub10RadioStats1mHistEntry 25 }
|
|
|
|
|
|
sub10RadioStats1mHistRxMgmtPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of Ethernet packets received over the Radio interface in this minute
|
|
and which are destined for the management sub-system on this unit."
|
|
|
|
::= { sub10RadioStats1mHistEntry 26 }
|
|
|
|
|
|
sub10RadioStats1mHistTxMgmtPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of Ethernet packets transmitted over the Radio interface
|
|
which originated from the management sub-system in this minute.
|
|
This does not include packets originating from the Ethernet interface."
|
|
|
|
::= { sub10RadioStats1mHistEntry 27 }
|
|
|
|
|
|
sub10RadioStats1mHistRxBadFrms OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The count of bad frames detected on the
|
|
receive side of the Radio interface in this minute."
|
|
|
|
::= { sub10RadioStats1mHistEntry 28 }
|
|
|
|
|
|
sub10RadioStats1mHistQPSKTo8PSK OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number transitions of Modulation Mode configuration
|
|
from QPSK to 8PSK in this 1 minute interval."
|
|
|
|
::= { sub10RadioStats1mHistEntry 29 }
|
|
|
|
|
|
sub10RadioStats1mHist8PSKToQPSK OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number transitions of Modulation Mode configuration
|
|
from 8PSK to QPSK in this 1 minute interval."
|
|
|
|
::= { sub10RadioStats1mHistEntry 30 }
|
|
|
|
|
|
sub10RadioStats1mHistAFERMin OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The minimum AFER (Air Frame Error Ratio) in this minute.
|
|
See sub10RadioLclAFER."
|
|
|
|
::= { sub10RadioStats1mHistEntry 31 }
|
|
|
|
|
|
sub10RadioStats1mHistAFERMax OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The maximum AFER (Air Frame Error Ratio) in this minute.
|
|
See sub10RadioLclAFER."
|
|
|
|
::= { sub10RadioStats1mHistEntry 32 }
|
|
|
|
|
|
sub10RadioStats1mHistAFERAvg OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The average AFER (Air Frame Error Ratio) in this minute.
|
|
See sub10RadioLclAFER."
|
|
|
|
::= { sub10RadioStats1mHistEntry 33 }
|
|
|
|
|
|
sub10RadioStats1mHistRxQPSK OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The time in seconds that the Rx Modulation Mode was QPSK
|
|
in this 1 minute interval."
|
|
|
|
::= { sub10RadioStats1mHistEntry 34 }
|
|
|
|
|
|
sub10RadioStats1mHistRx8PSK OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The time in seconds that the Rx Modulation Mode was 8PSK
|
|
in this 1 minute interval."
|
|
|
|
::= { sub10RadioStats1mHistEntry 35 }
|
|
|
|
|
|
sub10RadioStats1mHistTxQPSK OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The time in seconds that the Tx Modulation Mode was QPSK
|
|
in this 1 minute interval."
|
|
|
|
::= { sub10RadioStats1mHistEntry 36 }
|
|
|
|
|
|
sub10RadioStats1mHistTx8PSK OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The time in seconds that the Tx Modulation Mode was 8PSK
|
|
in this 1 minute interval."
|
|
|
|
::= { sub10RadioStats1mHistEntry 37 }
|
|
|
|
|
|
-- ****************************************************************************
|
|
-- .sub10RadioStatsHistory.sub10RadioStats15mHistory Objects
|
|
-- ****************************************************************************
|
|
|
|
sub10RadioStats15mHistIntvls OBJECT-TYPE
|
|
SYNTAX Unsigned32(0..96)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of valid table entries in sub10RadioStats15mHistTable
|
|
on this system. There is one entry per 15 minute interval.
|
|
If the unit has been running for a minimum of 24 hours
|
|
and collecting valid data then the number of entries will be 96,
|
|
this represents a total maximum of 24 hours worth of data."
|
|
|
|
::= { sub10RadioStats15mHistory 1 }
|
|
|
|
|
|
sub10RadioStats15mHistTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Sub10RadioStats15mHistEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table maintains a history of Radio statistics
|
|
based on 15 minute intervals. There are a maximum
|
|
of 96 intervals which represent 24 hours of data.
|
|
|
|
This table along with the 1m and 1d tables provide a
|
|
history of the performance of the radio interface. This
|
|
information may then be post processed and used as a
|
|
troubleshooting tool.
|
|
|
|
An entry in the table represents a 15 minute interval
|
|
where each interval is synchronised to the clock on the
|
|
hour. There are up to 96 intervals starting at 1. The
|
|
number of valid entries in the table is given by the value
|
|
of sub10RadioStats15mHistIntvls of which the minimum
|
|
is 0 and the maximum is 96 therefore providing
|
|
up to a maximum of 24 hours of 15 minute interval data.
|
|
|
|
The first entry indexed by 1 represents the most recent
|
|
completed 15 minute interval. At the end of each interval
|
|
all entries of 'index' are copied into entry 'index+1'. If the
|
|
number of valid intervals is 96 then the least recent interval
|
|
entry is summarised into 24 hour stats and then discarded."
|
|
|
|
::= { sub10RadioStats15mHistory 2 }
|
|
|
|
|
|
sub10RadioStats15mHistEntry OBJECT-TYPE
|
|
SYNTAX Sub10RadioStats15mHistEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in the sub10RadioStats15mHistTable.
|
|
Each entry represents 15 minutes performance
|
|
management data where the first entry with index=1
|
|
is the most recent 15 minute interval and the last
|
|
entry with index=n (up to 96) is the least recent
|
|
15 minute interval. The number of valid intervals
|
|
is sub10RadioStats15mHistIntvls."
|
|
INDEX { sub10RadioStats15mHistIntvl }
|
|
|
|
::= { sub10RadioStats15mHistTable 1 }
|
|
|
|
Sub10RadioStats15mHistEntry ::= SEQUENCE {
|
|
sub10RadioStats15mHistIntvl Unsigned32,
|
|
sub10RadioStats15mHistTime Sub10DateTime,
|
|
sub10RadioStats15mHistTxPowerMin Integer32,
|
|
sub10RadioStats15mHistTxPowerMax Integer32,
|
|
sub10RadioStats15mHistTxPowerAvg Integer32,
|
|
sub10RadioStats15mHistRxPowerMin OCTET STRING,
|
|
sub10RadioStats15mHistRxPowerMax OCTET STRING,
|
|
sub10RadioStats15mHistRxPowerAvg OCTET STRING,
|
|
sub10RadioStats15mHistVectErrMin OCTET STRING,
|
|
sub10RadioStats15mHistVectErrMax OCTET STRING,
|
|
sub10RadioStats15mHistVectErrAvg OCTET STRING,
|
|
sub10RadioStats15mHistLnkLossMin OCTET STRING,
|
|
sub10RadioStats15mHistLnkLossMax OCTET STRING,
|
|
sub10RadioStats15mHistLnkLossAvg OCTET STRING,
|
|
sub10RadioStats15mHistMWUTempMin Integer32,
|
|
sub10RadioStats15mHistMWUTempMax Integer32,
|
|
sub10RadioStats15mHistMWUTempAvg Integer32,
|
|
sub10RadioStats15mHistRxFrms Counter64,
|
|
sub10RadioStats15mHistTxFrms Counter64,
|
|
sub10RadioStats15mHistRxPkts Counter64,
|
|
sub10RadioStats15mHistTxPkts Counter64,
|
|
sub10RadioStats15mHistRxMgmtPkts Counter64,
|
|
sub10RadioStats15mHistTxMgmtPkts Counter64,
|
|
sub10RadioStats15mHistRxBadFrms Counter64,
|
|
sub10RadioStats15mHistQPSKTo8PSK Counter32,
|
|
sub10RadioStats15mHist8PSKToQPSK Counter32,
|
|
sub10RadioStats15mHistAFERMin OCTET STRING,
|
|
sub10RadioStats15mHistAFERMax OCTET STRING,
|
|
sub10RadioStats15mHistAFERAvg OCTET STRING,
|
|
sub10RadioStats15mHistRxQPSK Counter32,
|
|
sub10RadioStats15mHistRx8PSK Counter32,
|
|
sub10RadioStats15mHistTxQPSK Counter32,
|
|
sub10RadioStats15mHistTx8PSK Counter32
|
|
}
|
|
|
|
sub10RadioStats15mHistIntvl OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..96)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The interval number used as an index to this
|
|
table. Interval numbers start at 1 (the most
|
|
recent 15 minute interval) and have a maximum value of 96
|
|
(the least recent 15 minute interval)."
|
|
|
|
::= { sub10RadioStats15mHistEntry 1 }
|
|
|
|
|
|
sub10RadioStats15mHistTime OBJECT-TYPE
|
|
SYNTAX Sub10DateTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The local system time when this 15m history entry was created.
|
|
This represents the end of the 15 minute interval for which the
|
|
associated stats with the same sub10RadioStats15mHistIntvl
|
|
table index are relevant."
|
|
|
|
::= { sub10RadioStats15mHistEntry 2 }
|
|
|
|
|
|
sub10RadioStats15mHistTxPowerMin OBJECT-TYPE
|
|
SYNTAX Integer32(-100..100)
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The minimum value that the transmit power of the local radio
|
|
link has reached in this 15 minute interval, measured in dBm."
|
|
DEFVAL { 0 }
|
|
|
|
::= { sub10RadioStats15mHistEntry 3 }
|
|
|
|
|
|
sub10RadioStats15mHistTxPowerMax OBJECT-TYPE
|
|
SYNTAX Integer32(-100..100)
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The maximum value that the transmit power of the local radio
|
|
link has reached in this 15 minute interval, measured in dBm."
|
|
DEFVAL { 0 }
|
|
|
|
::= { sub10RadioStats15mHistEntry 4 }
|
|
|
|
|
|
sub10RadioStats15mHistTxPowerAvg OBJECT-TYPE
|
|
SYNTAX Integer32(-100..100)
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The average value that the transmit power of the local radio
|
|
link has reached in this 15 minute interval, measured in dBm."
|
|
DEFVAL { 0 }
|
|
|
|
::= { sub10RadioStats15mHistEntry 5 }
|
|
|
|
|
|
sub10RadioStats15mHistRxPowerMin OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The minimum value that the receive power of the local radio
|
|
link has reached in this 15 minute interval, measured in dBm."
|
|
DEFVAL { "0" }
|
|
|
|
::= { sub10RadioStats15mHistEntry 6 }
|
|
|
|
|
|
sub10RadioStats15mHistRxPowerMax OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The maximum value that the receive power of the local radio
|
|
link has reached in this 15 minute interval, measured in dBm."
|
|
DEFVAL { "0" }
|
|
|
|
::= { sub10RadioStats15mHistEntry 7 }
|
|
|
|
|
|
sub10RadioStats15mHistRxPowerAvg OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The average value that the receive power of the local radio
|
|
link has reached in this 15 minute interval, measured in dBm."
|
|
DEFVAL { "0" }
|
|
|
|
::= { sub10RadioStats15mHistEntry 8 }
|
|
|
|
|
|
sub10RadioStats15mHistVectErrMin OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The minimum value that the vector error of the local radio
|
|
link has reached in this 15 minute interval, measured in dB."
|
|
DEFVAL { "0" }
|
|
|
|
::= { sub10RadioStats15mHistEntry 9 }
|
|
|
|
|
|
sub10RadioStats15mHistVectErrMax OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The maximum value that the vector error of the local radio
|
|
link has reached in this 15 minute interval, measured in dB."
|
|
DEFVAL { "0" }
|
|
|
|
::= { sub10RadioStats15mHistEntry 10 }
|
|
|
|
|
|
sub10RadioStats15mHistVectErrAvg OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The average value that the vector error of the local radio
|
|
link has reached in this 15 minute interval, measured in dB."
|
|
DEFVAL { "0" }
|
|
|
|
::= { sub10RadioStats15mHistEntry 11 }
|
|
|
|
|
|
sub10RadioStats15mHistLnkLossMin OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The minimum value that the link loss of the local radio
|
|
link has reached in this 15 minute interval, measured in dB."
|
|
|
|
::= { sub10RadioStats15mHistEntry 12 }
|
|
|
|
|
|
sub10RadioStats15mHistLnkLossMax OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The maximum value that the link loss of the local radio
|
|
link has reached in this 15 minute interval, measured in dB."
|
|
|
|
::= { sub10RadioStats15mHistEntry 13 }
|
|
|
|
|
|
sub10RadioStats15mHistLnkLossAvg OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The average value that the link loss of the local radio
|
|
link has reached in this 15 minute interval, measured in dB."
|
|
|
|
::= { sub10RadioStats15mHistEntry 14 }
|
|
|
|
|
|
sub10RadioStats15mHistMWUTempMin OBJECT-TYPE
|
|
SYNTAX Integer32(-100..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The minimum MWU temperature measured in this 15 minute interval."
|
|
DEFVAL { 0 }
|
|
|
|
::= { sub10RadioStats15mHistEntry 15 }
|
|
|
|
|
|
sub10RadioStats15mHistMWUTempMax OBJECT-TYPE
|
|
SYNTAX Integer32(-100..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The maximum MWU temperature measured in this 15 minute interval."
|
|
DEFVAL { 0 }
|
|
|
|
::= { sub10RadioStats15mHistEntry 16 }
|
|
|
|
|
|
sub10RadioStats15mHistMWUTempAvg OBJECT-TYPE
|
|
SYNTAX Integer32(-100..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The average MWU temperature measured in this 15 minute interval."
|
|
DEFVAL { 0 }
|
|
|
|
::= { sub10RadioStats15mHistEntry 17 }
|
|
|
|
|
|
sub10RadioStats15mHistRxFrms OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of Airside frames received over the Radio interface in this 15 minutes.
|
|
This is irrespective of whether the Airside frame transmitted contained
|
|
any ethernet data."
|
|
|
|
::= { sub10RadioStats15mHistEntry 22 }
|
|
|
|
|
|
sub10RadioStats15mHistTxFrms OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of Airside frames transmitted over the Radio interface in this 15 minutes.
|
|
This is irrespective of whether the Airside frame transmitted contained
|
|
any ethernet data."
|
|
|
|
::= { sub10RadioStats15mHistEntry 23 }
|
|
|
|
|
|
sub10RadioStats15mHistRxPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of Ethernet packets received over the Radio interface in this 15 minutes.
|
|
This includes all packets whether destined for the management
|
|
sub-system on this unit or to be sent direct to the Ethernet interface."
|
|
|
|
::= { sub10RadioStats15mHistEntry 24 }
|
|
|
|
|
|
sub10RadioStats15mHistTxPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of Ethernet packets transmitted over the Radio interface
|
|
which originated from the Ethernet interface in this 15 minutes. This does not include
|
|
packets originating from the management sub-system."
|
|
|
|
::= { sub10RadioStats15mHistEntry 25 }
|
|
|
|
|
|
sub10RadioStats15mHistRxMgmtPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of Ethernet packets received over the Radio interface in this 15 minutes
|
|
and which are destined for the management sub-system on this unit."
|
|
|
|
::= { sub10RadioStats15mHistEntry 26 }
|
|
|
|
|
|
sub10RadioStats15mHistTxMgmtPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of Ethernet packets transmitted over the Radio interface
|
|
which originated from the management sub-system in this 15 minutes.
|
|
This does not include packets originating from the Ethernet interface."
|
|
|
|
::= { sub10RadioStats15mHistEntry 27 }
|
|
|
|
|
|
sub10RadioStats15mHistRxBadFrms OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The count of bad frames detected on the
|
|
receive side of the Radio interface in this 15 minutes."
|
|
|
|
::= { sub10RadioStats15mHistEntry 28 }
|
|
|
|
|
|
sub10RadioStats15mHistQPSKTo8PSK OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number transitions of Modulation Mode configuration
|
|
from QPSK to 8PSK in this 15 minute interval."
|
|
|
|
::= { sub10RadioStats15mHistEntry 29 }
|
|
|
|
|
|
sub10RadioStats15mHist8PSKToQPSK OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number transitions of Modulation Mode configuration
|
|
from 8PSK to QPSK in this 15 minute interval."
|
|
|
|
::= { sub10RadioStats15mHistEntry 30 }
|
|
|
|
|
|
sub10RadioStats15mHistAFERMin OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The minimum AFER (Air Frame Error Ratio) in this 15 minute interval.
|
|
See sub10RadioLclAFER."
|
|
|
|
::= { sub10RadioStats15mHistEntry 31 }
|
|
|
|
|
|
sub10RadioStats15mHistAFERMax OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The maximum AFER (Air Frame Error Ratio) in this 15 minute interval.
|
|
See sub10RadioLclAFER."
|
|
|
|
::= { sub10RadioStats15mHistEntry 32 }
|
|
|
|
|
|
sub10RadioStats15mHistAFERAvg OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The average AFER (Air Frame Error Ratio) in this 15 minute interval.
|
|
See sub10RadioLclAFER."
|
|
|
|
::= { sub10RadioStats15mHistEntry 33 }
|
|
|
|
|
|
sub10RadioStats15mHistRxQPSK OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The time in seconds that the Rx Modulation Mode was QPSK
|
|
in this 15 minute interval."
|
|
|
|
::= { sub10RadioStats15mHistEntry 34 }
|
|
|
|
|
|
sub10RadioStats15mHistRx8PSK OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The time in seconds that the Rx Modulation Mode was 8PSK
|
|
in this 15 minute interval."
|
|
|
|
::= { sub10RadioStats15mHistEntry 35 }
|
|
|
|
|
|
sub10RadioStats15mHistTxQPSK OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The time in seconds that the Tx Modulation Mode was QPSK
|
|
in this 15 minute interval."
|
|
|
|
::= { sub10RadioStats15mHistEntry 36 }
|
|
|
|
|
|
sub10RadioStats15mHistTx8PSK OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The time in seconds that the Tx Modulation Mode was 8PSK
|
|
in this 15 minute interval."
|
|
|
|
::= { sub10RadioStats15mHistEntry 37 }
|
|
|
|
|
|
-- ****************************************************************************
|
|
-- .sub10RadioStatsHistory.sub10RadioStats1dHistory Objects
|
|
-- ****************************************************************************
|
|
|
|
sub10RadioStats1dHistIntvls OBJECT-TYPE
|
|
SYNTAX Unsigned32(0..30)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of valid table entries in sub10RadioStats1dHistTable
|
|
on this system. There is one entry per 1 day interval.
|
|
|
|
If the unit has been running for a minimum of 30 days
|
|
and collecting valid data then the number of entries will be 30,
|
|
this represents a total maximum of 30 days worth of data."
|
|
|
|
::= { sub10RadioStats1dHistory 1 }
|
|
|
|
|
|
sub10RadioStats1dHistTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Sub10RadioStats1dHistEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table maintains a history of Radio statistics
|
|
based on 1 day intervals. There are a maximum
|
|
of 30 intervals which represent 30 days of data.
|
|
|
|
This table along with the 1m and 15m tables provide a
|
|
history of the performance of the radio interface. This
|
|
information may then be post processed and used as a
|
|
troubleshooting tool.
|
|
|
|
An entry in the table represents a 1 day interval
|
|
where each interval is synchronised to the clock on the
|
|
hour. There are up to 30 intervals starting at 1. The
|
|
number of valid entries in the table is given by the value
|
|
of sub10RadioStats1dHistIntvls of which the minimum
|
|
is 0 and the maximum is 30 therefore providing
|
|
up to a maximum of 30 days of 1 day interval data.
|
|
|
|
The first entry indexed by 1 represents the most recent
|
|
completed 1 day interval. At the end of each interval
|
|
all entries of 'index' are copied into entry 'index+1'. If the
|
|
number of valid intervals is 30 then the least recent interval
|
|
entry is discarded."
|
|
|
|
::= { sub10RadioStats1dHistory 2 }
|
|
|
|
|
|
sub10RadioStats1dHistEntry OBJECT-TYPE
|
|
SYNTAX Sub10RadioStats1dHistEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in the sub10RadioStats1dHistTable.
|
|
Each entry represents 1 day of performance
|
|
management data where the first entry with index=1
|
|
is the most recent 1 day interval and the last
|
|
entry with index=n (up to 30) is the least recent
|
|
1 day interval.
|
|
|
|
The number of valid intervals is given by the
|
|
value of sub10RadioStats1dHistIntvls."
|
|
INDEX { sub10RadioStats1dHistIntvl }
|
|
|
|
::= { sub10RadioStats1dHistTable 1 }
|
|
|
|
Sub10RadioStats1dHistEntry ::= SEQUENCE {
|
|
sub10RadioStats1dHistIntvl Unsigned32,
|
|
sub10RadioStats1dHistTime Sub10DateTime,
|
|
sub10RadioStats1dHistTxPowerMin Integer32,
|
|
sub10RadioStats1dHistTxPowerMax Integer32,
|
|
sub10RadioStats1dHistTxPowerAvg Integer32,
|
|
sub10RadioStats1dHistRxPowerMin OCTET STRING,
|
|
sub10RadioStats1dHistRxPowerMax OCTET STRING,
|
|
sub10RadioStats1dHistRxPowerAvg OCTET STRING,
|
|
sub10RadioStats1dHistVectErrMin OCTET STRING,
|
|
sub10RadioStats1dHistVectErrMax OCTET STRING,
|
|
sub10RadioStats1dHistVectErrAvg OCTET STRING,
|
|
sub10RadioStats1dHistLnkLossMin OCTET STRING,
|
|
sub10RadioStats1dHistLnkLossMax OCTET STRING,
|
|
sub10RadioStats1dHistLnkLossAvg OCTET STRING,
|
|
sub10RadioStats1dHistMWUTempMin Integer32,
|
|
sub10RadioStats1dHistMWUTempMax Integer32,
|
|
sub10RadioStats1dHistMWUTempAvg Integer32,
|
|
sub10RadioStats1dHistRxFrms Counter64,
|
|
sub10RadioStats1dHistTxFrms Counter64,
|
|
sub10RadioStats1dHistRxPkts Counter64,
|
|
sub10RadioStats1dHistTxPkts Counter64,
|
|
sub10RadioStats1dHistRxMgmtPkts Counter64,
|
|
sub10RadioStats1dHistTxMgmtPkts Counter64,
|
|
sub10RadioStats1dHistRxBadFrms Counter64,
|
|
sub10RadioStats1dHistQPSKTo8PSK Counter64,
|
|
sub10RadioStats1dHist8PSKToQPSK Counter64,
|
|
sub10RadioStats1dHistAFERMin OCTET STRING,
|
|
sub10RadioStats1dHistAFERMax OCTET STRING,
|
|
sub10RadioStats1dHistAFERAvg OCTET STRING,
|
|
sub10RadioStats1dHistRxQPSK Counter32,
|
|
sub10RadioStats1dHistRx8PSK Counter32,
|
|
sub10RadioStats1dHistTxQPSK Counter32,
|
|
sub10RadioStats1dHistTx8PSK Counter32
|
|
}
|
|
|
|
sub10RadioStats1dHistIntvl OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..30)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The interval number used as an index to this
|
|
table. Interval numbers start at 1 (the most
|
|
recent 1 day interval) and have a maximum value of 24
|
|
(the least recent 1 day interval)."
|
|
|
|
::= { sub10RadioStats1dHistEntry 1 }
|
|
|
|
|
|
sub10RadioStats1dHistTime OBJECT-TYPE
|
|
SYNTAX Sub10DateTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The local system time when this 1d history entry was created.
|
|
This represents the end of the 1 day interval for which the
|
|
associated stats with the same sub10RadioStats1dHistIntvl
|
|
table index are relevant."
|
|
|
|
::= { sub10RadioStats1dHistEntry 2 }
|
|
|
|
|
|
sub10RadioStats1dHistTxPowerMin OBJECT-TYPE
|
|
SYNTAX Integer32(-100..100)
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The minimum value that the transmit power of the local radio
|
|
link has reached in this day interval, measured in dBm."
|
|
DEFVAL { 0 }
|
|
|
|
::= { sub10RadioStats1dHistEntry 3 }
|
|
|
|
|
|
sub10RadioStats1dHistTxPowerMax OBJECT-TYPE
|
|
SYNTAX Integer32(-100..100)
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The maximum value that the transmit power of the local radio
|
|
link has reached in this day interval, measured in dBm."
|
|
DEFVAL { 0 }
|
|
|
|
::= { sub10RadioStats1dHistEntry 4 }
|
|
|
|
|
|
sub10RadioStats1dHistTxPowerAvg OBJECT-TYPE
|
|
SYNTAX Integer32(-100..100)
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The average value that the transmit power of the local radio
|
|
link has reached in this day interval, measured in dBm."
|
|
DEFVAL { 0 }
|
|
|
|
::= { sub10RadioStats1dHistEntry 5 }
|
|
|
|
|
|
sub10RadioStats1dHistRxPowerMin OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The minimum value that the receive power of the local radio
|
|
link has reached in this day interval, measured in dBm."
|
|
DEFVAL { "0" }
|
|
|
|
::= { sub10RadioStats1dHistEntry 6 }
|
|
|
|
|
|
sub10RadioStats1dHistRxPowerMax OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The maximum value that the receive power of the local radio
|
|
link has reached in this day interval, measured in dBm."
|
|
DEFVAL { "0" }
|
|
|
|
::= { sub10RadioStats1dHistEntry 7 }
|
|
|
|
|
|
sub10RadioStats1dHistRxPowerAvg OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The average value that the receive power of the local radio
|
|
link has reached in this day interval, measured in dBm."
|
|
DEFVAL { "0" }
|
|
|
|
::= { sub10RadioStats1dHistEntry 8 }
|
|
|
|
|
|
sub10RadioStats1dHistVectErrMin OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The minimum value that the vector error of the local radio
|
|
link has reached in this day interval, measured in dB."
|
|
DEFVAL { "0" }
|
|
|
|
::= { sub10RadioStats1dHistEntry 9 }
|
|
|
|
|
|
sub10RadioStats1dHistVectErrMax OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The maximum value that the vector error of the local radio
|
|
link has reached in this day interval, measured in dB."
|
|
DEFVAL { "0" }
|
|
|
|
::= { sub10RadioStats1dHistEntry 10 }
|
|
|
|
|
|
sub10RadioStats1dHistVectErrAvg OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The average value that the vector error of the local radio
|
|
link has reached in this day interval, measured in dB."
|
|
DEFVAL { "0" }
|
|
|
|
::= { sub10RadioStats1dHistEntry 11 }
|
|
|
|
|
|
sub10RadioStats1dHistLnkLossMin OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The minimum value that the link loss of the local radio
|
|
link has reached in this day interval, measured in dB."
|
|
|
|
::= { sub10RadioStats1dHistEntry 12 }
|
|
|
|
|
|
sub10RadioStats1dHistLnkLossMax OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The maximum value that the link loss of the local radio
|
|
link has reached in this day interval, measured in dB."
|
|
|
|
::= { sub10RadioStats1dHistEntry 13 }
|
|
|
|
|
|
sub10RadioStats1dHistLnkLossAvg OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The average value that the link loss of the local radio
|
|
link has reached in this day interval, measured in dB."
|
|
|
|
::= { sub10RadioStats1dHistEntry 14 }
|
|
|
|
|
|
sub10RadioStats1dHistMWUTempMin OBJECT-TYPE
|
|
SYNTAX Integer32(-100..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The minimum MWU temperature measured in this day interval."
|
|
DEFVAL { 0 }
|
|
|
|
::= { sub10RadioStats1dHistEntry 15 }
|
|
|
|
|
|
sub10RadioStats1dHistMWUTempMax OBJECT-TYPE
|
|
SYNTAX Integer32(-100..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The maximum MWU temperature measured in this day interval."
|
|
DEFVAL { 0 }
|
|
|
|
::= { sub10RadioStats1dHistEntry 16 }
|
|
|
|
|
|
sub10RadioStats1dHistMWUTempAvg OBJECT-TYPE
|
|
SYNTAX Integer32(-100..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The average MWU temperature measured in this day interval."
|
|
DEFVAL { 0 }
|
|
|
|
::= { sub10RadioStats1dHistEntry 17 }
|
|
|
|
|
|
sub10RadioStats1dHistRxFrms OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of Airside frames received over the Radio interface in this day interval.
|
|
This is irrespective of whether the Airside frame transmitted contained
|
|
any ethernet data."
|
|
|
|
::= { sub10RadioStats1dHistEntry 22 }
|
|
|
|
|
|
sub10RadioStats1dHistTxFrms OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of Airside frames transmitted over the Radio interface in this day interval.
|
|
This is irrespective of whether the Airside frame transmitted contained
|
|
any ethernet data."
|
|
|
|
::= { sub10RadioStats1dHistEntry 23 }
|
|
|
|
|
|
sub10RadioStats1dHistRxPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of Ethernet packets received over the Radio interface in this day interval.
|
|
This includes all packets whether destined for the management
|
|
sub-system on this unit or to be sent direct to the Ethernet interface."
|
|
|
|
::= { sub10RadioStats1dHistEntry 24 }
|
|
|
|
|
|
sub10RadioStats1dHistTxPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of Ethernet packets transmitted over the Radio interface
|
|
which originated from the Ethernet interface in this day interval. This does not include
|
|
packets originating from the management sub-system."
|
|
|
|
::= { sub10RadioStats1dHistEntry 25 }
|
|
|
|
|
|
sub10RadioStats1dHistRxMgmtPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of Ethernet packets received over the Radio interface in this day interval
|
|
and which are destined for the management sub-system on this unit."
|
|
|
|
::= { sub10RadioStats1dHistEntry 26 }
|
|
|
|
|
|
sub10RadioStats1dHistTxMgmtPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of Ethernet packets transmitted over the Radio interface
|
|
which originated from the management sub-system in this day interval.
|
|
This does not include packets originating from the Ethernet interface."
|
|
|
|
::= { sub10RadioStats1dHistEntry 27 }
|
|
|
|
|
|
sub10RadioStats1dHistRxBadFrms OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The count of bad frames detected on the
|
|
receive side of the Radio interface in this day interval."
|
|
|
|
::= { sub10RadioStats1dHistEntry 28 }
|
|
|
|
|
|
sub10RadioStats1dHistQPSKTo8PSK OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number transitions of Modulation Mode configuration
|
|
from QPSK to 8PSK in this 1 day interval."
|
|
|
|
::= { sub10RadioStats1dHistEntry 29 }
|
|
|
|
|
|
sub10RadioStats1dHist8PSKToQPSK OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number transitions of Modulation Mode configuration
|
|
from 8PSK to QPSK in this 1 day interval."
|
|
|
|
::= { sub10RadioStats1dHistEntry 30 }
|
|
|
|
|
|
sub10RadioStats1dHistAFERMin OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The minimum AFER (Air Frame Error Ratio) in this 1 day interval.
|
|
See sub10RadioLclAFER."
|
|
|
|
::= { sub10RadioStats1dHistEntry 31 }
|
|
|
|
|
|
sub10RadioStats1dHistAFERMax OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The maximum AFER (Air Frame Error Ratio) in this 1 day interval.
|
|
See sub10RadioLclAFER."
|
|
|
|
::= { sub10RadioStats1dHistEntry 32 }
|
|
|
|
|
|
sub10RadioStats1dHistAFERAvg OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The average AFER (Air Frame Error Ratio) in this 1 day interval.
|
|
See sub10RadioLclAFER."
|
|
|
|
::= { sub10RadioStats1dHistEntry 33 }
|
|
|
|
|
|
sub10RadioStats1dHistRxQPSK OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The time in seconds that the Rx Modulation Mode was QPSK
|
|
in this 1 day interval."
|
|
|
|
::= { sub10RadioStats1dHistEntry 34 }
|
|
|
|
|
|
sub10RadioStats1dHistRx8PSK OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The time in seconds that the Rx Modulation Mode was 8PSK
|
|
in this 1 day interval."
|
|
|
|
::= { sub10RadioStats1dHistEntry 35 }
|
|
|
|
|
|
sub10RadioStats1dHistTxQPSK OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The time in seconds that the Tx Modulation Mode was QPSK
|
|
in this 1 day interval."
|
|
|
|
::= { sub10RadioStats1dHistEntry 36 }
|
|
|
|
|
|
sub10RadioStats1dHistTx8PSK OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The time in seconds that the Tx Modulation Mode was 8PSK
|
|
in this 1 day interval."
|
|
|
|
::= { sub10RadioStats1dHistEntry 37 }
|
|
|
|
|
|
-- ****************************************************************************
|
|
-- .sub10MIBConformance.sub10MIBCompliances Objects
|
|
-- ****************************************************************************
|
|
sub10Compliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION "The compliance statement for Sub10 entities which implement the SUB10SYSTEMS-MIB."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS { sub10NotificationsGrp,
|
|
sub10UnitLocalStatusGrp,
|
|
sub10UnitLclAlarmStateEntryGrp,
|
|
sub10UnitRemoteStatusGrp,
|
|
sub10UnitMgmtSystemGrp,
|
|
sub10UnitMgmtIpGrp,
|
|
sub10UnitMgmtVlanGrp,
|
|
sub10UnitMgmtUsersGrp,
|
|
sub10UnitMgmtUserEntryGrp,
|
|
sub10UnitMgmtTimeGrp,
|
|
sub10UnitMgmtAlarmEntryGrp,
|
|
sub10UnitMgmtAlarmsGrp,
|
|
sub10UnitMgmtSnmpGrp,
|
|
sub10UnitMgmtSnmpTrpDstEntryGrp,
|
|
sub10UnitMgmtSnmpUserEntryGrp,
|
|
sub10UnitMgmtSnmpAccessEntryGrp,
|
|
sub10UnitMgmtSnmpTargetEntryGrp,
|
|
sub10UnitMgmtFirmwareGrp,
|
|
sub10UnitMgmtFirmwareBankEntryGrp,
|
|
sub10UnitMgmtDNSEntryGrp,
|
|
sub10UnitMgmtEncryptionGrp,
|
|
sub10UnitMgmtLicenseGrp,
|
|
sub10UnitMgmtSyncEGrp,
|
|
sub10UnitMgmtActionsGrp,
|
|
sub10EthLclStatusEntryGrp,
|
|
sub10EthRmtStatusEntryGrp,
|
|
sub10EthMgmtPhyEntryGrp,
|
|
sub10EthMgmtVlanGrp,
|
|
sub10EthMgmtVlanAllowedEntryGrp,
|
|
sub10EthMgmtQoSGrp,
|
|
sub10EthMgmtQoSQEntryGrp,
|
|
sub10EthMgmtQoSVlanEntryGrp,
|
|
sub10EthMgmtQoSPCPEntryGrp,
|
|
sub10EthMgmtQoSDSCPEntryGrp,
|
|
sub10EthMgmtQoSMPLSEntryGrp,
|
|
sub10EthMgmtStatsActiveEntryGrp,
|
|
sub10EthernetStatsGrp,
|
|
sub10EthernetStatsCurrEntryGrp,
|
|
sub10EthernetStats15mHistoryGrp,
|
|
sub10EthStats15mHistEntryGrp,
|
|
sub10EthStats1dHistoryGrp,
|
|
sub10EthStats1dHistEntryGrp,
|
|
sub10RadioLocalStatusGrp,
|
|
sub10RadioRemoteStatusGrp,
|
|
sub10RadioMgmtGrp,
|
|
sub10RadioMgmtStatsGrp,
|
|
sub10RadioMgmtStatsActiveEntryGrp,
|
|
sub10RadioStatsGrp,
|
|
sub10RadioStatsCurrentGrp,
|
|
sub10RadioStats1mHistoryGrp,
|
|
sub10RadioStats1mHistEntryGrp,
|
|
sub10RadioStats15mHistoryGrp,
|
|
sub10RadioStats15mHistEntryGrp,
|
|
sub10RadioStats1dHistoryGrp,
|
|
sub10RadioStats1dHistEntryGrp
|
|
}
|
|
|
|
|
|
::= { sub10MIBCompliances 1 }
|
|
|
|
|
|
-- ****************************************************************************
|
|
-- .sub10MIBConformance.sub10MIBGroups Objects
|
|
-- ****************************************************************************
|
|
sub10NotificationsGrp NOTIFICATION-GROUP
|
|
NOTIFICATIONS {
|
|
sub10UnitAlarm,
|
|
sub10EthernetAlarm,
|
|
sub10RadioAlarm
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "This group defines objects that are members of the sub10NotificationsGrp group"
|
|
|
|
::= { sub10MIBGroups 1 }
|
|
|
|
sub10UnitLocalStatusGrp OBJECT-GROUP
|
|
OBJECTS {
|
|
sub10UnitLclTime,
|
|
sub10UnitLclUnitType,
|
|
sub10UnitLclDescription,
|
|
sub10UnitLclHWSerialNumber,
|
|
sub10UnitLclTerminalName,
|
|
sub10UnitLclTerminalType,
|
|
sub10UnitLclLinkName,
|
|
sub10UnitLclLinkId,
|
|
sub10UnitLclSiteName,
|
|
sub10UnitLclFirmwareLoadedBank,
|
|
sub10UnitLclFirmwareVersion,
|
|
sub10UnitLclIpAddress,
|
|
sub10UnitLclMWUTemperature,
|
|
sub10UnitLclNTPSyncStatus,
|
|
sub10UnitLclRadioDataRate,
|
|
sub10UnitLclMWUType,
|
|
sub10UnitLclFPGAVersion
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "This group defines objects that are members of the sub10UnitLocalStatusGrp group"
|
|
|
|
::= { sub10MIBGroups 2 }
|
|
|
|
sub10UnitLclAlarmStateEntryGrp OBJECT-GROUP
|
|
OBJECTS {
|
|
sub10UnitLclAlarmState,
|
|
sub10UnitLclAlarmStateTime
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "This group defines objects that are members of the sub10UnitLclAlarmStateEntryGrp group"
|
|
|
|
::= { sub10MIBGroups 3 }
|
|
|
|
sub10UnitRemoteStatusGrp OBJECT-GROUP
|
|
OBJECTS {
|
|
sub10UnitRmtUnitType,
|
|
sub10UnitRmtTime,
|
|
sub10UnitRmtTerminalName,
|
|
sub10UnitRmtTerminalType,
|
|
sub10UnitRmtLinkName,
|
|
sub10UnitRmtLinkId,
|
|
sub10UnitRmtHWSerialNumber,
|
|
sub10UnitRmtFirmwareVersion,
|
|
sub10UnitRmtIpAddress,
|
|
sub10UnitRmtMWUTemperature
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "This group defines objects that are members of the sub10UnitRemoteStatusGrp group"
|
|
|
|
::= { sub10MIBGroups 4 }
|
|
|
|
sub10UnitMgmtSystemGrp OBJECT-GROUP
|
|
OBJECTS {
|
|
sub10UnitMgmtTerminalName,
|
|
sub10UnitMgmtLinkName,
|
|
sub10UnitMgmtLinkId,
|
|
sub10UnitMgmtSiteName,
|
|
sub10UnitMgmtContactName
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "This group defines objects that are members of the sub10UnitMgmtSystemGrp group"
|
|
|
|
::= { sub10MIBGroups 5 }
|
|
|
|
sub10UnitMgmtIpGrp OBJECT-GROUP
|
|
OBJECTS {
|
|
sub10UnitMgmtIpMode,
|
|
sub10UnitMgmtIpAddress,
|
|
sub10UnitMgmtIpSubnetMask,
|
|
sub10UnitMgmtIpDefGateway,
|
|
sub10UnitMgmtIpDHCP
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "This group defines objects that are members of the sub10UnitMgmtIpGrp group"
|
|
|
|
::= { sub10MIBGroups 6 }
|
|
|
|
sub10UnitMgmtVlanGrp OBJECT-GROUP
|
|
OBJECTS {
|
|
sub10UnitMgmtVlanState,
|
|
sub10UnitMgmtVlanId,
|
|
sub10UnitMgmtVlanPriority,
|
|
sub10UnitMgmtVlanDSCP,
|
|
sub10UnitMgmtVlanDEI
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "This group defines objects that are members of the sub10UnitMgmtVlanGrp group"
|
|
|
|
::= { sub10MIBGroups 7 }
|
|
|
|
sub10UnitMgmtUsersGrp OBJECT-GROUP
|
|
OBJECTS {
|
|
sub10UnitMgmtUsersNumber
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "This group defines objects that are members of the sub10UnitMgmtUsersGrp group"
|
|
|
|
::= { sub10MIBGroups 8 }
|
|
|
|
sub10UnitMgmtUserEntryGrp OBJECT-GROUP
|
|
OBJECTS {
|
|
sub10UnitMgmtUserRowStatus,
|
|
sub10UnitMgmtUserName,
|
|
sub10UnitMgmtUserGroup,
|
|
sub10UnitMgmtUserPassword,
|
|
sub10UnitMgmtUserPasswordVerify
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "This group defines objects that are members of the sub10UnitMgmtUserEntryGrp group"
|
|
|
|
::= { sub10MIBGroups 9 }
|
|
|
|
sub10UnitMgmtTimeGrp OBJECT-GROUP
|
|
OBJECTS {
|
|
sub10UnitMgmtTimeLocal,
|
|
sub10UnitMgmtTimeNTPEnabled,
|
|
sub10UnitMgmtTimeNTPServer1,
|
|
sub10UnitMgmtTimeNTPServer2,
|
|
sub10UnitMgmtTimeNTPPort,
|
|
sub10UnitMgmtTimeNTPSyncStatus,
|
|
sub10UnitMgmtDateTime
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "This group defines objects that are members of the sub10UnitMgmtTimeGrp group"
|
|
|
|
::= { sub10MIBGroups 10 }
|
|
|
|
sub10UnitMgmtAlarmEntryGrp OBJECT-GROUP
|
|
OBJECTS {
|
|
sub10UnitMgmtAlarmRowStatus,
|
|
sub10UnitMgmtAlarmName,
|
|
sub10UnitMgmtAlarmSeverity,
|
|
sub10UnitMgmtAlarmMeasObject,
|
|
sub10UnitMgmtAlarmMonitorIntvl,
|
|
sub10UnitMgmtAlarmRaiseOper,
|
|
sub10UnitMgmtAlarmRaiseThresh,
|
|
sub10UnitMgmtAlarmClearOper,
|
|
sub10UnitMgmtAlarmClearThresh,
|
|
sub10UnitMgmtAlarmRaiseIntvls,
|
|
sub10UnitMgmtAlarmClearIntvls,
|
|
sub10UnitMgmtAlarmType,
|
|
sub10UnitMgmtAlarmSmtpAddress,
|
|
sub10UnitMgmtAlarmToSyslog,
|
|
sub10UnitMgmtAlarmEnabled,
|
|
sub10UnitMgmtAlarmMeasObjectVal,
|
|
sub10UnitMgmtAlarmToSNMP,
|
|
sub10UnitMgmtAlarmMeasObjIndex
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "This group defines objects that are members of the sub10UnitMgmtAlarmEntryGrp group"
|
|
|
|
::= { sub10MIBGroups 11 }
|
|
|
|
sub10UnitMgmtAlarmsGrp OBJECT-GROUP
|
|
OBJECTS {
|
|
sub10UnitMgmtAlarmsUserDefStart
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "This group defines objects that are members of the sub10UnitMgmtAlarmsGrp group"
|
|
|
|
::= { sub10MIBGroups 12 }
|
|
|
|
sub10UnitMgmtSnmpGrp OBJECT-GROUP
|
|
OBJECTS {
|
|
sub10UnitMgmtSnmpAgent,
|
|
sub10UnitMgmtSnmpTraps,
|
|
sub10UnitMgmtSnmpv320Mib,
|
|
sub10UnitMgmtSnmpv3,
|
|
sub10UnitMgmtSnmpEngineIdFormat,
|
|
sub10UnitMgmtSnmpEngineIdText,
|
|
sub10UnitMgmtSnmpEngineId,
|
|
sub10UnitMgmtSnmpOperAuthProto,
|
|
sub10UnitMgmtSnmpOperPrivProto,
|
|
sub10UnitMgmtSnmpAdminAuthProto,
|
|
sub10UnitMgmtSnmpAdminPrivProto,
|
|
sub10UnitMgmtSnmpMaintAuthProto,
|
|
sub10UnitMgmtSnmpMaintPrivProto
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "This group defines objects that are members of the sub10UnitMgmtSnmpGrp group"
|
|
|
|
::= { sub10MIBGroups 13 }
|
|
|
|
sub10UnitMgmtSnmpTrpDstEntryGrp OBJECT-GROUP
|
|
OBJECTS {
|
|
sub10UnitMgmtSnmpTrpDstRowStatus,
|
|
sub10UnitMgmtSnmpTrpDstIpAddr,
|
|
sub10UnitMgmtSnmpTrpDstCommunity
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "This group defines objects that are members of the sub10UnitMgmtSnmpTrpDstEntryGrp group"
|
|
|
|
::= { sub10MIBGroups 14 }
|
|
|
|
sub10UnitMgmtSnmpUserEntryGrp OBJECT-GROUP
|
|
OBJECTS {
|
|
sub10UnitMgmtSnmpUserRowStatus,
|
|
sub10UnitMgmtSnmpUserName,
|
|
sub10UnitMgmtSnmpUserGroup,
|
|
sub10UnitMgmtSnmpUserAuthPwd,
|
|
sub10UnitMgmtSnmpUserAuthPwdChk,
|
|
sub10UnitMgmtSnmpUserPrivPwd,
|
|
sub10UnitMgmtSnmpUserPrivPwdChk
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "This group defines objects that are members of the sub10UnitMgmtSnmpUserEntryGrp group"
|
|
|
|
::= { sub10MIBGroups 15 }
|
|
|
|
sub10UnitMgmtSnmpAccessEntryGrp OBJECT-GROUP
|
|
OBJECTS {
|
|
sub10UnitMgmtSnmpAccessRowStatus,
|
|
sub10UnitMgmtSnmpAccessName,
|
|
sub10UnitMgmtSnmpAccessIpAddr
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "This group defines objects that are members of the sub10UnitMgmtSnmpAccessEntryGrp group"
|
|
|
|
::= { sub10MIBGroups 16 }
|
|
|
|
sub10UnitMgmtSnmpTargetEntryGrp OBJECT-GROUP
|
|
OBJECTS {
|
|
sub10UnitMgmtSnmpTargetRowStatus,
|
|
sub10UnitMgmtSnmpTargetName,
|
|
sub10UnitMgmtSnmpTargetIpAddr,
|
|
sub10UnitMgmtSnmpTargetUserName
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "This group defines objects that are members of the sub10UnitMgmtSnmpTargetEntryGrp group"
|
|
|
|
::= { sub10MIBGroups 17 }
|
|
|
|
sub10UnitMgmtFirmwareGrp OBJECT-GROUP
|
|
OBJECTS {
|
|
sub10UnitMgmtFirmwareSelectBank,
|
|
sub10UnitMgmtFirmwareLoadedBank,
|
|
sub10UnitMgmtFirmwareVersion,
|
|
sub10UnitMgmtFirmwareBootVersion,
|
|
sub10UnitMgmtFirmwareAction,
|
|
sub10UnitMgmtFirmwareUplImage,
|
|
sub10UnitMgmtFirmwareUplSvrIp,
|
|
sub10UnitMgmtFirmwareFromBank,
|
|
sub10UnitMgmtFirmwareToBank,
|
|
sub10UnitMgmtFirmwareActStatus,
|
|
sub10UnitMgmtFirmwareActProgress
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "This group defines objects that are members of the sub10UnitMgmtFirmwareGrp group"
|
|
|
|
::= { sub10MIBGroups 18 }
|
|
|
|
sub10UnitMgmtFirmwareBankEntryGrp OBJECT-GROUP
|
|
OBJECTS {
|
|
sub10UnitMgmtFirmwareBankVersion,
|
|
sub10UnitMgmtFirmwareBankImage
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "This group defines objects that are members of the sub10UnitMgmtFirmwareBankEntryGrp group"
|
|
|
|
::= { sub10MIBGroups 19 }
|
|
|
|
sub10UnitMgmtDNSEntryGrp OBJECT-GROUP
|
|
OBJECTS {
|
|
sub10UnitMgmtDNServer
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "This group defines objects that are members of the sub10UnitMgmtDNSEntryGrp group"
|
|
|
|
::= { sub10MIBGroups 20 }
|
|
|
|
sub10UnitMgmtEncryptionGrp OBJECT-GROUP
|
|
OBJECTS {
|
|
sub10UnitMgmtEncryptMode,
|
|
sub10UnitMgmtEncryptKey
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "This group defines objects that are members of the sub10UnitMgmtEncryptionGrp group"
|
|
|
|
::= { sub10MIBGroups 21 }
|
|
|
|
sub10UnitMgmtLicenseGrp OBJECT-GROUP
|
|
OBJECTS {
|
|
sub10UnitMgmtLicenseKey,
|
|
sub10UnitMgmtLicenseAES
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "This group defines objects that are members of the sub10UnitMgmtLicenseGrp group"
|
|
|
|
::= { sub10MIBGroups 22 }
|
|
|
|
sub10UnitMgmtSyncEGrp OBJECT-GROUP
|
|
OBJECTS {
|
|
sub10UnitMgmtSyncEMode
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "This group defines objects that are members of the sub10UnitMgmtSyncEGrp group"
|
|
|
|
::= { sub10MIBGroups 23 }
|
|
|
|
sub10UnitMgmtActionsGrp OBJECT-GROUP
|
|
OBJECTS {
|
|
sub10UnitMgmtTransaction,
|
|
sub10UnitMgmtTransactionStatus,
|
|
sub10UnitMgmtRollbackTimeout,
|
|
sub10UnitMgmtTransactionMode,
|
|
sub10UnitMgmtResetAction,
|
|
sub10UnitMgmtResetStatsGroup,
|
|
sub10UnitMgmtResetAlarmsType
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "This group defines objects that are members of the sub10UnitMgmtActionsGrp group"
|
|
|
|
::= { sub10MIBGroups 24 }
|
|
|
|
sub10EthLclStatusEntryGrp OBJECT-GROUP
|
|
OBJECTS {
|
|
sub10EthLclLinkStatus,
|
|
sub10EthLclMacAddress,
|
|
sub10EthLclSpeed,
|
|
sub10EthLclDuplex,
|
|
sub10EthLclMDI
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "This group defines objects that are members of the sub10EthLclStatusEntryGrp group"
|
|
|
|
::= { sub10MIBGroups 25 }
|
|
|
|
sub10EthRmtStatusEntryGrp OBJECT-GROUP
|
|
OBJECTS {
|
|
sub10EthRmtLinkStatus,
|
|
sub10EthRmtMacAddress,
|
|
sub10EthRmtSpeed,
|
|
sub10EthRmtDuplex,
|
|
sub10EthRmtMDI
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "This group defines objects that are members of the sub10EthRmtStatusEntryGrp group"
|
|
|
|
::= { sub10MIBGroups 26 }
|
|
|
|
sub10EthMgmtPhyEntryGrp OBJECT-GROUP
|
|
OBJECTS {
|
|
sub10EthMgmtPhyAutoNeg,
|
|
sub10EthMgmtPhySpeed,
|
|
sub10EthMgmtPhyDuplex,
|
|
sub10EthMgmtPhyMDI
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "This group defines objects that are members of the sub10EthMgmtPhyEntryGrp group"
|
|
|
|
::= { sub10MIBGroups 27 }
|
|
|
|
sub10EthMgmtVlanGrp OBJECT-GROUP
|
|
OBJECTS {
|
|
sub10EthMgmtVlanFiltering,
|
|
sub10EthMgmtVlanDefaultEnabled,
|
|
sub10EthMgmtVlanDefaultId,
|
|
sub10EthMgmtVlanDefaultPriority,
|
|
sub10EthMgmtVlanDefaultDEI,
|
|
sub10EthMgmtVlanIngressAction,
|
|
sub10EthMgmtVlanEgressAction
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "This group defines objects that are members of the sub10EthMgmtVlanGrp group"
|
|
|
|
::= { sub10MIBGroups 28 }
|
|
|
|
sub10EthMgmtVlanAllowedEntryGrp OBJECT-GROUP
|
|
OBJECTS {
|
|
sub10EthMgmtVlanAllowedRowStatus,
|
|
sub10EthMgmtVlanAllowedId
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "This group defines objects that are members of the sub10EthMgmtVlanAllowedEntryGrp group"
|
|
|
|
::= { sub10MIBGroups 29 }
|
|
|
|
sub10EthMgmtQoSGrp OBJECT-GROUP
|
|
OBJECTS {
|
|
sub10EthMgmtQoSActiveState,
|
|
sub10EthMgmtQoSMode,
|
|
sub10EthMgmtQoSUntaggedQueue,
|
|
sub10EthMgmtQoSVlanMappingNumber,
|
|
sub10EthMgmtQoSDSCPMappingNumber,
|
|
sub10EthMgmtQoSMPLSMappingNumber
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "This group defines objects that are members of the sub10EthMgmtQoSGrp group"
|
|
|
|
::= { sub10MIBGroups 30 }
|
|
|
|
sub10EthMgmtQoSQEntryGrp OBJECT-GROUP
|
|
OBJECTS {
|
|
sub10EthMgmtQoSQSchedulingType,
|
|
sub10EthMgmtQoSQDWRRWeight,
|
|
sub10EthMgmtQoSQCongestionPolicy,
|
|
sub10EthMgmtQoSQSizeMax,
|
|
sub10EthMgmtQoSQLen
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "This group defines objects that are members of the sub10EthMgmtQoSQEntryGrp group"
|
|
|
|
::= { sub10MIBGroups 31 }
|
|
|
|
sub10EthMgmtQoSVlanEntryGrp OBJECT-GROUP
|
|
OBJECTS {
|
|
sub10EthMgmtQoSVlanId,
|
|
sub10EthMgmtQoSVlanQueue
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "This group defines objects that are members of the sub10EthMgmtQoSVlanEntryGrp group"
|
|
|
|
::= { sub10MIBGroups 32 }
|
|
|
|
sub10EthMgmtQoSPCPEntryGrp OBJECT-GROUP
|
|
OBJECTS {
|
|
sub10EthMgmtQoSPCPQueue
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "This group defines objects that are members of the sub10EthMgmtQoSPCPEntryGrp group"
|
|
|
|
::= { sub10MIBGroups 33 }
|
|
|
|
sub10EthMgmtQoSDSCPEntryGrp OBJECT-GROUP
|
|
OBJECTS {
|
|
sub10EthMgmtQoSDSCPMarking,
|
|
sub10EthMgmtQoSDSCPQueue
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "This group defines objects that are members of the sub10EthMgmtQoSDSCPEntryGrp group"
|
|
|
|
::= { sub10MIBGroups 34 }
|
|
|
|
sub10EthMgmtQoSMPLSEntryGrp OBJECT-GROUP
|
|
OBJECTS {
|
|
sub10EthMgmtQoSMPLSTrafficClass,
|
|
sub10EthMgmtQoSMPLSQueue
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "This group defines objects that are members of the sub10EthMgmtQoSMPLSEntryGrp group"
|
|
|
|
::= { sub10MIBGroups 35 }
|
|
|
|
sub10EthMgmtStatsActiveEntryGrp OBJECT-GROUP
|
|
OBJECTS {
|
|
sub10EthMgmtStatsActiveName,
|
|
sub10EthMgmtStatsActiveState
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "This group defines objects that are members of the sub10EthMgmtStatsActiveEntryGrp group"
|
|
|
|
::= { sub10MIBGroups 36 }
|
|
|
|
sub10EthernetStatsGrp OBJECT-GROUP
|
|
OBJECTS {
|
|
sub10EthStatsTimeElapsed
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "This group defines objects that are members of the sub10EthernetStatsGrp group"
|
|
|
|
::= { sub10MIBGroups 37 }
|
|
|
|
sub10EthernetStatsCurrEntryGrp OBJECT-GROUP
|
|
OBJECTS {
|
|
sub10EthStatsCurrRxOctets,
|
|
sub10EthStatsCurrRxGoodFrms,
|
|
sub10EthStatsCurrRxBcastFrms,
|
|
sub10EthStatsCurrRxMcastFrms,
|
|
sub10EthStatsCurrRxPauseFrms,
|
|
sub10EthStatsCurrRxCRCErrs,
|
|
sub10EthStatsCurrRxAlignErrs,
|
|
sub10EthStatsCurrRxOversized,
|
|
sub10EthStatsCurrRxJabberFrms,
|
|
sub10EthStatsCurrRxUndersized,
|
|
sub10EthStatsCurrRxFragments,
|
|
sub10EthStatsCurrRxSOFOvrns,
|
|
sub10EthStatsCurrTxOctets,
|
|
sub10EthStatsCurrTxGoodFrms,
|
|
sub10EthStatsCurrTxBcastFrms,
|
|
sub10EthStatsCurrTxMcastFrms,
|
|
sub10EthStatsCurrTxPauseFrms,
|
|
sub10EthStatsCurrTxDeferred,
|
|
sub10EthStatsCurrTxCollsn,
|
|
sub10EthStatsCurrTxSnglCollsn,
|
|
sub10EthStatsCurrTxMlplCollsn,
|
|
sub10EthStatsCurrTxExsvCollsn,
|
|
sub10EthStatsCurrTxLtCollsn,
|
|
sub10EthStatsCurrTxCSenseErrs,
|
|
sub10EthStatsCurrPkts64Octets,
|
|
sub10EthStatsCurrPkts65T127,
|
|
sub10EthStatsCurrPkts128T255,
|
|
sub10EthStatsCurrPkts256T511,
|
|
sub10EthStatsCurrPkts512T1023,
|
|
sub10EthStatsCurrPkts1024TMax,
|
|
sub10EthStatsCurrRxMbps,
|
|
sub10EthStatsCurrTxMbps,
|
|
sub10EthStatsCurrRxMbpsMin,
|
|
sub10EthStatsCurrRxMbpsMax,
|
|
sub10EthStatsCurrRxMbpsAvg,
|
|
sub10EthStatsCurrTxMbpsMin,
|
|
sub10EthStatsCurrTxMbpsMax,
|
|
sub10EthStatsCurrTxMbpsAvg,
|
|
sub10EthStatsCurrRmtRxMbpsAvg,
|
|
sub10EthStatsCurrRmtTxMbpsAvg
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "This group defines objects that are members of the sub10EthernetStatsCurrEntryGrp group"
|
|
|
|
::= { sub10MIBGroups 38 }
|
|
|
|
sub10EthernetStats15mHistoryGrp OBJECT-GROUP
|
|
OBJECTS {
|
|
sub10EthStats15mHistIntvls
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "This group defines objects that are members of the sub10EthernetStats15mHistoryGrp group"
|
|
|
|
::= { sub10MIBGroups 39 }
|
|
|
|
sub10EthStats15mHistEntryGrp OBJECT-GROUP
|
|
OBJECTS {
|
|
sub10EthStats15mHistTime,
|
|
sub10EthStats15mHistRxOctets,
|
|
sub10EthStats15mHistRxGoodFrms,
|
|
sub10EthStats15mHistRxBcastFrms,
|
|
sub10EthStats15mHistRxMcastFrms,
|
|
sub10EthStats15mHistRxPauseFrms,
|
|
sub10EthStats15mHistRxCRCErrs,
|
|
sub10EthStats15mHistRxAlignErrs,
|
|
sub10EthStats15mHistRxOversized,
|
|
sub10EthStats15mHistRxJabberFrms,
|
|
sub10EthStats15mHistRxUndersized,
|
|
sub10EthStats15mHistRxFragments,
|
|
sub10EthStats15mHistRxSOFOvrns,
|
|
sub10EthStats15mHistTxOctets,
|
|
sub10EthStats15mHistTxGoodFrms,
|
|
sub10EthStats15mHistTxBcastFrms,
|
|
sub10EthStats15mHistTxMcastFrms,
|
|
sub10EthStats15mHistTxPauseFrms,
|
|
sub10EthStats15mHistTxDeferred,
|
|
sub10EthStats15mHistTxCollsn,
|
|
sub10EthStats15mHistTxSnglCollsn,
|
|
sub10EthStats15mHistTxMlplCollsn,
|
|
sub10EthStats15mHistTxExsvCollsn,
|
|
sub10EthStats15mHistTxLtCollsn,
|
|
sub10EthStats15mHistTxCSenseErrs,
|
|
sub10EthStats15mHistPkts64Octets,
|
|
sub10EthStats15mHistPkts65T127,
|
|
sub10EthStats15mHistPkts128T255,
|
|
sub10EthStats15mHistPkts256T511,
|
|
sub10EthStats15mHistPkts512T1023,
|
|
sub10EthStats15mHistPkts1024TMax,
|
|
sub10EthStats15mHistRxMbpsMin,
|
|
sub10EthStats15mHistRxMbpsMax,
|
|
sub10EthStats15mHistRxMbpsAvg,
|
|
sub10EthStats15mHistTxMbpsMin,
|
|
sub10EthStats15mHistTxMbpsMax,
|
|
sub10EthStats15mHistTxMbpsAvg
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "This group defines objects that are members of the sub10EthStats15mHistEntryGrp group"
|
|
|
|
::= { sub10MIBGroups 40 }
|
|
|
|
sub10EthStats1dHistoryGrp OBJECT-GROUP
|
|
OBJECTS {
|
|
sub10EthStats1dHistIntvls
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "This group defines objects that are members of the sub10EthStats1dHistoryGrp group"
|
|
|
|
::= { sub10MIBGroups 41 }
|
|
|
|
sub10EthStats1dHistEntryGrp OBJECT-GROUP
|
|
OBJECTS {
|
|
sub10EthStats1dHistTime,
|
|
sub10EthStats1dHistRxOctets,
|
|
sub10EthStats1dHistRxGoodFrms,
|
|
sub10EthStats1dHistRxBcastFrms,
|
|
sub10EthStats1dHistRxMcastFrms,
|
|
sub10EthStats1dHistRxPauseFrms,
|
|
sub10EthStats1dHistRxCRCErrs,
|
|
sub10EthStats1dHistRxAlignErrs,
|
|
sub10EthStats1dHistRxOversized,
|
|
sub10EthStats1dHistRxJabberFrms,
|
|
sub10EthStats1dHistRxUndersized,
|
|
sub10EthStats1dHistRxFragments,
|
|
sub10EthStats1dHistRxSOFOvrns,
|
|
sub10EthStats1dHistTxOctets,
|
|
sub10EthStats1dHistTxGoodFrms,
|
|
sub10EthStats1dHistTxBcastFrms,
|
|
sub10EthStats1dHistTxMcastFrms,
|
|
sub10EthStats1dHistTxPauseFrms,
|
|
sub10EthStats1dHistTxDeferred,
|
|
sub10EthStats1dHistTxCollsn,
|
|
sub10EthStats1dHistTxSnglCollsn,
|
|
sub10EthStats1dHistTxMlplCollsn,
|
|
sub10EthStats1dHistTxExsvCollsn,
|
|
sub10EthStats1dHistTxLtCollsn,
|
|
sub10EthStats1dHistTxCSenseErrs,
|
|
sub10EthStats1dHistPkts64Octets,
|
|
sub10EthStats1dHistPkts65T127,
|
|
sub10EthStats1dHistPkts128T255,
|
|
sub10EthStats1dHistPkts256T511,
|
|
sub10EthStats1dHistPkts512T1023,
|
|
sub10EthStats1dHistPkts1024TMax,
|
|
sub10EthStats1dHistRxMbpsMin,
|
|
sub10EthStats1dHistRxMbpsMax,
|
|
sub10EthStats1dHistRxMbpsAvg,
|
|
sub10EthStats1dHistTxMbpsMin,
|
|
sub10EthStats1dHistTxMbpsMax,
|
|
sub10EthStats1dHistTxMbpsAvg
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "This group defines objects that are members of the sub10EthStats1dHistEntryGrp group"
|
|
|
|
::= { sub10MIBGroups 42 }
|
|
|
|
sub10RadioLocalStatusGrp OBJECT-GROUP
|
|
OBJECTS {
|
|
sub10RadioLclLinkStatus,
|
|
sub10RadioLclTxPower,
|
|
sub10RadioLclRxPower,
|
|
sub10RadioLclVectErr,
|
|
sub10RadioLclLnkLoss,
|
|
sub10RadioLclAlignmentMode,
|
|
sub10RadioLclDataRate,
|
|
sub10RadioLclMWUType,
|
|
sub10RadioLclAFER,
|
|
sub10RadioLclRxModulationMode,
|
|
sub10RadioLclTxModulationMode
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "This group defines objects that are members of the sub10RadioLocalStatusGrp group"
|
|
|
|
::= { sub10MIBGroups 43 }
|
|
|
|
sub10RadioRemoteStatusGrp OBJECT-GROUP
|
|
OBJECTS {
|
|
sub10RadioRmtLinkStatus,
|
|
sub10RadioRmtTxPower,
|
|
sub10RadioRmtRxPower,
|
|
sub10RadioRmtVectErr,
|
|
sub10RadioRmtLnkLoss,
|
|
sub10RadioRmtAlignmentMode,
|
|
sub10RadioRmtAFER
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "This group defines objects that are members of the sub10RadioRemoteStatusGrp group"
|
|
|
|
::= { sub10MIBGroups 44 }
|
|
|
|
sub10RadioMgmtGrp OBJECT-GROUP
|
|
OBJECTS {
|
|
sub10RadioMgmtTxPowerLimit,
|
|
sub10RadioMgmtTxRxFreq,
|
|
sub10RadioMgmtAPCMode,
|
|
sub10RadioMgmtModulationMode,
|
|
sub10RadioMgmtAmod,
|
|
sub10RadioMgmtAlignmentMode,
|
|
sub10RadioMgmtMWUChannelWidth,
|
|
sub10RadioMgmtDataRate
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "This group defines objects that are members of the sub10RadioMgmtGrp group"
|
|
|
|
::= { sub10MIBGroups 45 }
|
|
|
|
sub10RadioMgmtStatsGrp OBJECT-GROUP
|
|
OBJECTS {
|
|
sub10RadioMgmtStats1dPersist
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "This group defines objects that are members of the sub10RadioMgmtStatsGrp group"
|
|
|
|
::= { sub10MIBGroups 46 }
|
|
|
|
sub10RadioMgmtStatsActiveEntryGrp OBJECT-GROUP
|
|
OBJECTS {
|
|
sub10RadioMgmtStatsActiveName,
|
|
sub10RadioMgmtStatsActiveState
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "This group defines objects that are members of the sub10RadioMgmtStatsActiveEntryGrp group"
|
|
|
|
::= { sub10MIBGroups 47 }
|
|
|
|
sub10RadioStatsGrp OBJECT-GROUP
|
|
OBJECTS {
|
|
sub10RadioStatsTimeElapsed
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "This group defines objects that are members of the sub10RadioStatsGrp group"
|
|
|
|
::= { sub10MIBGroups 48 }
|
|
|
|
sub10RadioStatsCurrentGrp OBJECT-GROUP
|
|
OBJECTS {
|
|
sub10RadioStatsCurrTxPowerMin,
|
|
sub10RadioStatsCurrTxPowerMax,
|
|
sub10RadioStatsCurrTxPowerAvg,
|
|
sub10RadioStatsCurrRxPowerMin,
|
|
sub10RadioStatsCurrRxPowerMax,
|
|
sub10RadioStatsCurrRxPowerAvg,
|
|
sub10RadioStatsCurrVectErrMin,
|
|
sub10RadioStatsCurrVectErrMax,
|
|
sub10RadioStatsCurrVectErrAvg,
|
|
sub10RadioStatsCurrLnkLossMin,
|
|
sub10RadioStatsCurrLnkLossMax,
|
|
sub10RadioStatsCurrLnkLossAvg,
|
|
sub10RadioStatsCurrRxFrms,
|
|
sub10RadioStatsCurrTxFrms,
|
|
sub10RadioStatsCurrRxPkts,
|
|
sub10RadioStatsCurrTxPkts,
|
|
sub10RadioStatsCurrRxMgmtPkts,
|
|
sub10RadioStatsCurrTxMgmtPkts,
|
|
sub10RadioStatsCurrRxBadFrms,
|
|
sub10RadioStatsCurrMWUTempMin,
|
|
sub10RadioStatsCurrMWUTempMax,
|
|
sub10RadioStatsCurrMWUTempAvg,
|
|
sub10RadioStatsCurrQPSKTo8PSK,
|
|
sub10RadioStatsCurr8PSKToQPSK,
|
|
sub10RadioStatsCurrAFERMin,
|
|
sub10RadioStatsCurrAFERMax,
|
|
sub10RadioStatsCurrAFERAvg,
|
|
sub10RadioStatsCurrRmtTxPowerAvg,
|
|
sub10RadioStatsCurrRmtRxPowerAvg,
|
|
sub10RadioStatsCurrRmtVectErrAvg,
|
|
sub10RadioStatsCurrRmtLnkLossAvg,
|
|
sub10RadioStatsCurrRmtMWUTempAvg,
|
|
sub10RadioStatsCurrRmtAFERAvg,
|
|
sub10RadioStatsCurrRxQPSK,
|
|
sub10RadioStatsCurrRx8PSK,
|
|
sub10RadioStatsCurrTxQPSK,
|
|
sub10RadioStatsCurrTx8PSK
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "This group defines objects that are members of the sub10RadioStatsCurrentGrp group"
|
|
|
|
::= { sub10MIBGroups 49 }
|
|
|
|
sub10RadioStats1mHistoryGrp OBJECT-GROUP
|
|
OBJECTS {
|
|
sub10RadioStats1mHistIntvls
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "This group defines objects that are members of the sub10RadioStats1mHistoryGrp group"
|
|
|
|
::= { sub10MIBGroups 50 }
|
|
|
|
sub10RadioStats1mHistEntryGrp OBJECT-GROUP
|
|
OBJECTS {
|
|
sub10RadioStats1mHistTime,
|
|
sub10RadioStats1mHistTxPowerMin,
|
|
sub10RadioStats1mHistTxPowerMax,
|
|
sub10RadioStats1mHistTxPowerAvg,
|
|
sub10RadioStats1mHistRxPowerMin,
|
|
sub10RadioStats1mHistRxPowerMax,
|
|
sub10RadioStats1mHistRxPowerAvg,
|
|
sub10RadioStats1mHistVectErrMin,
|
|
sub10RadioStats1mHistVectErrMax,
|
|
sub10RadioStats1mHistVectErrAvg,
|
|
sub10RadioStats1mHistLnkLossMin,
|
|
sub10RadioStats1mHistLnkLossMax,
|
|
sub10RadioStats1mHistLnkLossAvg,
|
|
sub10RadioStats1mHistMWUTempMin,
|
|
sub10RadioStats1mHistMWUTempMax,
|
|
sub10RadioStats1mHistMWUTempAvg,
|
|
sub10RadioStats1mHistRxFrms,
|
|
sub10RadioStats1mHistTxFrms,
|
|
sub10RadioStats1mHistRxPkts,
|
|
sub10RadioStats1mHistTxPkts,
|
|
sub10RadioStats1mHistRxMgmtPkts,
|
|
sub10RadioStats1mHistTxMgmtPkts,
|
|
sub10RadioStats1mHistRxBadFrms,
|
|
sub10RadioStats1mHistQPSKTo8PSK,
|
|
sub10RadioStats1mHist8PSKToQPSK,
|
|
sub10RadioStats1mHistAFERMin,
|
|
sub10RadioStats1mHistAFERMax,
|
|
sub10RadioStats1mHistAFERAvg,
|
|
sub10RadioStats1mHistRxQPSK,
|
|
sub10RadioStats1mHistRx8PSK,
|
|
sub10RadioStats1mHistTxQPSK,
|
|
sub10RadioStats1mHistTx8PSK
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "This group defines objects that are members of the sub10RadioStats1mHistEntryGrp group"
|
|
|
|
::= { sub10MIBGroups 51 }
|
|
|
|
sub10RadioStats15mHistoryGrp OBJECT-GROUP
|
|
OBJECTS {
|
|
sub10RadioStats15mHistIntvls
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "This group defines objects that are members of the sub10RadioStats15mHistoryGrp group"
|
|
|
|
::= { sub10MIBGroups 52 }
|
|
|
|
sub10RadioStats15mHistEntryGrp OBJECT-GROUP
|
|
OBJECTS {
|
|
sub10RadioStats15mHistTime,
|
|
sub10RadioStats15mHistTxPowerMin,
|
|
sub10RadioStats15mHistTxPowerMax,
|
|
sub10RadioStats15mHistTxPowerAvg,
|
|
sub10RadioStats15mHistRxPowerMin,
|
|
sub10RadioStats15mHistRxPowerMax,
|
|
sub10RadioStats15mHistRxPowerAvg,
|
|
sub10RadioStats15mHistVectErrMin,
|
|
sub10RadioStats15mHistVectErrMax,
|
|
sub10RadioStats15mHistVectErrAvg,
|
|
sub10RadioStats15mHistLnkLossMin,
|
|
sub10RadioStats15mHistLnkLossMax,
|
|
sub10RadioStats15mHistLnkLossAvg,
|
|
sub10RadioStats15mHistMWUTempMin,
|
|
sub10RadioStats15mHistMWUTempMax,
|
|
sub10RadioStats15mHistMWUTempAvg,
|
|
sub10RadioStats15mHistRxFrms,
|
|
sub10RadioStats15mHistTxFrms,
|
|
sub10RadioStats15mHistRxPkts,
|
|
sub10RadioStats15mHistTxPkts,
|
|
sub10RadioStats15mHistRxMgmtPkts,
|
|
sub10RadioStats15mHistTxMgmtPkts,
|
|
sub10RadioStats15mHistRxBadFrms,
|
|
sub10RadioStats15mHistQPSKTo8PSK,
|
|
sub10RadioStats15mHist8PSKToQPSK,
|
|
sub10RadioStats15mHistAFERMin,
|
|
sub10RadioStats15mHistAFERMax,
|
|
sub10RadioStats15mHistAFERAvg,
|
|
sub10RadioStats15mHistRxQPSK,
|
|
sub10RadioStats15mHistRx8PSK,
|
|
sub10RadioStats15mHistTxQPSK,
|
|
sub10RadioStats15mHistTx8PSK
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "This group defines objects that are members of the sub10RadioStats15mHistEntryGrp group"
|
|
|
|
::= { sub10MIBGroups 53 }
|
|
|
|
sub10RadioStats1dHistoryGrp OBJECT-GROUP
|
|
OBJECTS {
|
|
sub10RadioStats1dHistIntvls
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "This group defines objects that are members of the sub10RadioStats1dHistoryGrp group"
|
|
|
|
::= { sub10MIBGroups 54 }
|
|
|
|
sub10RadioStats1dHistEntryGrp OBJECT-GROUP
|
|
OBJECTS {
|
|
sub10RadioStats1dHistTime,
|
|
sub10RadioStats1dHistTxPowerMin,
|
|
sub10RadioStats1dHistTxPowerMax,
|
|
sub10RadioStats1dHistTxPowerAvg,
|
|
sub10RadioStats1dHistRxPowerMin,
|
|
sub10RadioStats1dHistRxPowerMax,
|
|
sub10RadioStats1dHistRxPowerAvg,
|
|
sub10RadioStats1dHistVectErrMin,
|
|
sub10RadioStats1dHistVectErrMax,
|
|
sub10RadioStats1dHistVectErrAvg,
|
|
sub10RadioStats1dHistLnkLossMin,
|
|
sub10RadioStats1dHistLnkLossMax,
|
|
sub10RadioStats1dHistLnkLossAvg,
|
|
sub10RadioStats1dHistMWUTempMin,
|
|
sub10RadioStats1dHistMWUTempMax,
|
|
sub10RadioStats1dHistMWUTempAvg,
|
|
sub10RadioStats1dHistRxFrms,
|
|
sub10RadioStats1dHistTxFrms,
|
|
sub10RadioStats1dHistRxPkts,
|
|
sub10RadioStats1dHistTxPkts,
|
|
sub10RadioStats1dHistRxMgmtPkts,
|
|
sub10RadioStats1dHistTxMgmtPkts,
|
|
sub10RadioStats1dHistRxBadFrms,
|
|
sub10RadioStats1dHistQPSKTo8PSK,
|
|
sub10RadioStats1dHist8PSKToQPSK,
|
|
sub10RadioStats1dHistAFERMin,
|
|
sub10RadioStats1dHistAFERMax,
|
|
sub10RadioStats1dHistAFERAvg,
|
|
sub10RadioStats1dHistRxQPSK,
|
|
sub10RadioStats1dHistRx8PSK,
|
|
sub10RadioStats1dHistTxQPSK,
|
|
sub10RadioStats1dHistTx8PSK
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "This group defines objects that are members of the sub10RadioStats1dHistEntryGrp group"
|
|
|
|
::= { sub10MIBGroups 55 }
|
|
|
|
|
|
END
|
|
|