1869 lines
68 KiB
Plaintext
1869 lines
68 KiB
Plaintext
-- *********************************************************************
|
|
-- **
|
|
-- ** BATM Advanced Communications.
|
|
-- **
|
|
-- *********************************************************************
|
|
-- ** Filename: PRVT-RSVP-MIB.mib
|
|
-- ** Project: T-Metro Switches.
|
|
-- ** Purpose: Private MIB
|
|
-- *********************************************************************
|
|
-- (c) Copyright, 2001, BATM Advanced Communications. All rights reserved.
|
|
-- WARNING:
|
|
--
|
|
-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
|
|
--
|
|
-- This file is the property of BATM Advanced Communications and contains
|
|
-- proprietary and confidential information. This file is made
|
|
-- available to authorized BATM customers on the express
|
|
-- condition that neither it, nor any of the information contained
|
|
-- therein, shall be disclosed to third parties or be used for any
|
|
-- purpose other than to replace, modify or upgrade firmware and/or
|
|
-- software components of BATM manufactured equipment within the
|
|
-- authorized customer's network, and that such transfer be
|
|
-- completed in accordance with the instructions provided by
|
|
-- BATM. Any other use is strictly prohibited.
|
|
--
|
|
-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
|
|
-- WARRANTY, THE SOFTWARE PROGRAMS CONTAINED IN THIS FILE ARE
|
|
-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
|
|
-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
|
|
-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
|
|
--
|
|
-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
|
|
-- INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
|
|
-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
|
|
-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
|
|
-- TO USE, THE SOFTWARE CONTAINED IN THIS FILE.
|
|
--
|
|
-- ----------------------------------------------------------------------------
|
|
|
|
PRVT-RSVP-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE,
|
|
Integer32, Unsigned32, IpAddress
|
|
FROM SNMPv2-SMI
|
|
|
|
MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF
|
|
|
|
TEXTUAL-CONVENTION, RowStatus, TruthValue
|
|
FROM SNMPv2-TC
|
|
InterfaceIndexOrZero FROM IF-MIB
|
|
InetAddressIPv6 FROM INET-ADDRESS-MIB
|
|
mpls FROM PRVT-CR-LDP-MIB;
|
|
|
|
|
|
|
|
prvtRsvp MODULE-IDENTITY
|
|
LAST-UPDATED "200804140000Z"
|
|
ORGANIZATION "BATM Advanced Communication"
|
|
CONTACT-INFO
|
|
" BATM/Telco Systems Support team
|
|
Email:
|
|
For North America: techsupport@telco.com
|
|
For North Europe: support@batm.de, info@batm.de
|
|
For the rest of the world: techsupport@telco.com"
|
|
DESCRIPTION "The MIB module for management of the PRVT-RSVP
|
|
product."
|
|
|
|
-- Revision history.
|
|
REVISION "200804140000Z"
|
|
DESCRIPTION
|
|
"Added range constraints to
|
|
prvtRsvpProductLocalRepairDelay, prvtRsvpProductRefreshInterval,
|
|
prvtRsvpProductNotifyRRInterval, prvtRsvpProductNotifyRRLimit,
|
|
prvtRsvpProductInitPathRRInterval, prvtRsvpProductInitPathRRLimit."
|
|
|
|
|
|
REVISION "200606020000Z"
|
|
DESCRIPTION
|
|
"Initial version."
|
|
|
|
::= { mpls 7 }
|
|
|
|
prvtRsvpObjects OBJECT IDENTIFIER ::= { prvtRsvp 1 } -- tables
|
|
|
|
-- Textual conventions
|
|
|
|
PrvtRsvpAdminStatus ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "The desired administrative state of an RSVP
|
|
entity."
|
|
SYNTAX INTEGER {
|
|
up(1),
|
|
down(2)
|
|
}
|
|
|
|
PrvtRsvpOperStatus ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "The current operational state of an RSVP entity."
|
|
SYNTAX INTEGER {
|
|
up(1), -- active
|
|
down(2), -- inactive
|
|
goingUp(3), -- activating
|
|
goingDown(4), -- deactivating
|
|
actFailed(5) -- activation failed
|
|
}
|
|
|
|
PrvtRsvpIndex ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "The index value identifying an RSVP entity."
|
|
SYNTAX Unsigned32
|
|
|
|
PrvtRsvpDiagReqIndex ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index value identifying an RSVP session that is being
|
|
diagnosed."
|
|
SYNTAX Unsigned32
|
|
|
|
PrvtRsvpDiagNodeIndexType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index value identifying a node within an RSVP session that is
|
|
being diagnosed."
|
|
SYNTAX Unsigned32
|
|
|
|
PrvtRsvpDiagNodeTypeVal ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "The type of a node in a session that is being diagnosed."
|
|
SYNTAX INTEGER {
|
|
missing(1), -- no information received
|
|
ingress(2), -- the ingress node
|
|
transit(3), -- an intermediate node
|
|
egress(4) -- the egress node
|
|
}
|
|
|
|
-- End of textual conventions
|
|
|
|
|
|
-- RSVP entity table
|
|
-- This table is used to create and manage RSVP entities.
|
|
|
|
prvtRsvpProductTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PrvtRsvpProductEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of RSVP entities."
|
|
::= { prvtRsvpObjects 1 }
|
|
|
|
prvtRsvpProductEntry OBJECT-TYPE
|
|
SYNTAX PrvtRsvpProductEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry represents an RSVP entity."
|
|
INDEX { prvtRsvpProductIndex }
|
|
::= { prvtRsvpProductTable 1 }
|
|
|
|
PrvtRsvpProductEntry ::= SEQUENCE {
|
|
prvtRsvpProductIndex PrvtRsvpIndex,
|
|
prvtRsvpProductASNumber Integer32,
|
|
prvtRsvpProductSenderTTL Integer32,
|
|
prvtRsvpProductMinTimerPeriod Integer32,
|
|
prvtRsvpProductAPIIfIndex InterfaceIndexOrZero,
|
|
prvtRsvpProductAPIAddress OCTET STRING,
|
|
prvtRsvpProductAPIRefreshInterval Integer32,
|
|
prvtRsvpProductLocalRepairDelay Integer32,
|
|
prvtRsvpProductRefreshInterval Integer32,
|
|
prvtRsvpProductRefreshMultiple Integer32,
|
|
prvtRsvpProductRfrshSlewDenom Integer32,
|
|
prvtRsvpProductRfrshSlewNumerator Integer32,
|
|
prvtRsvpProductBlockadeMultiple Integer32,
|
|
prvtRsvpProductSocketBufPoolSize Integer32,
|
|
prvtRsvpProductSwitchBufPoolSize Integer32,
|
|
prvtRsvpProductTeMibBufPoolSize Integer32,
|
|
prvtRsvpProductRoutingBufPoolSize Integer32,
|
|
prvtRsvpProductLSPSetupPriority Integer32,
|
|
prvtRsvpProductLSPHoldingPriority Integer32,
|
|
prvtRsvpProductAdminStatus PrvtRsvpAdminStatus,
|
|
prvtRsvpProductOperStatus PrvtRsvpOperStatus,
|
|
prvtRsvpProductRowStatus RowStatus,
|
|
prvtRsvpProductLsrIndex Unsigned32,
|
|
prvtRsvpProductTeMibIndex Unsigned32,
|
|
prvtRsvpProductMultiStackSupport Integer32,
|
|
prvtRsvpProductUseHopByHop TruthValue,
|
|
prvtRsvpProductUseNotify TruthValue,
|
|
prvtRsvpProductNotifyRRDecay Integer32,
|
|
prvtRsvpProductNotifyRRInterval Integer32,
|
|
prvtRsvpProductNotifyRRLimit Integer32,
|
|
prvtRsvpProductAllowIPEncap TruthValue,
|
|
prvtRsvpProductProtocolExtensions BITS,
|
|
prvtRsvpProductPSRFlags BITS,
|
|
prvtRsvpProductInitPathRRDecay Integer32,
|
|
prvtRsvpProductInitPathRRInterval Integer32,
|
|
prvtRsvpProductInitPathRRLimit Integer32,
|
|
prvtRsvpProductEnableUni TruthValue,
|
|
prvtRsvpProductRestartCapable TruthValue,
|
|
prvtRsvpProductRestartTime Unsigned32,
|
|
prvtRsvpProductRecoveryTime Unsigned32,
|
|
prvtRsvpProductMinPeerRestart Integer32,
|
|
prvtRsvpProductGracefulDelTimeout Integer32,
|
|
prvtRsvpProductEgressDelBehavior INTEGER,
|
|
prvtRsvpProductEnabUniConnSplicing TruthValue,
|
|
prvtRsvpProductFastRerouteCaps BITS,
|
|
prvtRsvpProductFastRroutBkpRtryInt Integer32,
|
|
prvtRsvpProductErrorActionFlags BITS,
|
|
prvtRsvpProductEnableNni INTEGER,
|
|
prvtRsvpProductBehaviorFlags BITS,
|
|
prvtRsvpProductLabelSetStyle INTEGER,
|
|
prvtRsvpProductLabelSetOperStatus INTEGER,
|
|
prvtRsvpProductLabelSetTrapEnable TruthValue,
|
|
prvtRsvpProductLabelSetChngAct Integer32,
|
|
prvtRsvpProductExtPrtAdminStatus PrvtRsvpAdminStatus,
|
|
prvtRsvpProductUniIncSonetProfile Unsigned32,
|
|
prvtRsvpProductFrrFacAdminStatus PrvtRsvpAdminStatus,
|
|
prvtRsvpProductFrrFacOperStatus PrvtRsvpOperStatus,
|
|
prvtRsvpProductIpv6AdminStatus PrvtRsvpAdminStatus,
|
|
prvtRsvpProductIpv6OperStatus PrvtRsvpOperStatus,
|
|
prvtRsvpProductAPIIpv6Address InetAddressIPv6
|
|
}
|
|
|
|
prvtRsvpProductIndex OBJECT-TYPE
|
|
SYNTAX PrvtRsvpIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of this prvtRsvpProductEntry. This is the
|
|
HAF entity index passed on the entity create parameters."
|
|
::= { prvtRsvpProductEntry 1 }
|
|
|
|
prvtRsvpProductASNumber OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number identifying the autonomous system (AS) to which
|
|
this node belongs."
|
|
DEFVAL { 1 }
|
|
::= { prvtRsvpProductEntry 2 }
|
|
|
|
prvtRsvpProductSenderTTL OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The TTL set on messages originating at this node. A value
|
|
of 0 indicates this number is determined by other means."
|
|
DEFVAL { 0 }
|
|
::= { prvtRsvpProductEntry 3 }
|
|
|
|
prvtRsvpProductMinTimerPeriod OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum granularity to allow an internal timer to be
|
|
set in the PRVT-RSVP product code."
|
|
DEFVAL { 200 }
|
|
::= { prvtRsvpProductEntry 4 }
|
|
|
|
prvtRsvpProductAPIIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Management assigned interface identifier for the (internal) LRAPI
|
|
interface between RSVP and TE-MIB components. This must be unique in
|
|
the interface index namespace of the node - it MUST not match any real
|
|
interface index.
|
|
It is recommended that this is set to zero or 0x7FFFFFFF."
|
|
DEFVAL { 2147483647 }
|
|
::= { prvtRsvpProductEntry 5 }
|
|
|
|
prvtRsvpProductAPIAddress OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(4..16))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Management assigned IP address used to identify the (internal) LRAPI
|
|
interface between RSVP and TE-MIB components.
|
|
The configured API address MUST not be a real address in the network.
|
|
It is recommended that this is set to a non-zero reserved address
|
|
value, such as 224.0.0.0.
|
|
If multi-stack support is set to PHOP, this address must be unique for
|
|
each RSVP stack in the node.
|
|
The same address(es) can be used on all nodes in the network."
|
|
DEFVAL { 'E0000000'H } -- 224.0.0.0
|
|
::= { prvtRsvpProductEntry 6 }
|
|
|
|
prvtRsvpProductAPIRefreshInterval OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field is now deprecated."
|
|
DEFVAL { 30000 }
|
|
::= { prvtRsvpProductEntry 7 }
|
|
|
|
prvtRsvpProductLocalRepairDelay OBJECT-TYPE
|
|
SYNTAX Integer32 (-1 | 1000..2147483647)
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to set the delay between detection of a
|
|
path error and instigation of local repair procedures. This
|
|
allows local routing updates to converge.
|
|
A value of -1 indicates that local
|
|
repair procedures should not take place, but that the error
|
|
should be propagated upstream.
|
|
Where FRR capabilities are supported at this node
|
|
local_repair_delay must be set to -1."
|
|
|
|
|
|
DEFVAL { 1000 }
|
|
::= { prvtRsvpProductEntry 8 }
|
|
|
|
prvtRsvpProductRefreshInterval OBJECT-TYPE
|
|
SYNTAX Integer32 (1000..2147483647)
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This RSVP value, R, which is used to set the average
|
|
interval between refresh path and resv messages.
|
|
Note : If values for the if_refresh_interval and if_refresh_multiple
|
|
are configured such that the following inequality is not obeyed :
|
|
6 * refresh_interval * (refresh_multiple + 0.5) < 0x7FFFFFFF.
|
|
Then the time-to-die for the path value will be set to its maximum
|
|
value and it is probable that the lsp will time out before a refresh
|
|
arrives."
|
|
DEFVAL { 30000 }
|
|
::= { prvtRsvpProductEntry 9 }
|
|
|
|
prvtRsvpProductRefreshMultiple OBJECT-TYPE
|
|
SYNTAX Integer32 (1..214783647)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The RSVP value, K, which is the number of unresponded Path
|
|
or Resv refresh attempts which must be made, spaced by
|
|
the refresh interval before the state is deemed to have
|
|
timed out.
|
|
Note : See note in prvtRsvpProductRefreshInterval above."
|
|
DEFVAL { 3 }
|
|
::= { prvtRsvpProductEntry 10 }
|
|
|
|
prvtRsvpProductRfrshSlewDenom OBJECT-TYPE
|
|
SYNTAX Integer32 (1..214783647)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The denominator of the fraction, SlewMax, which is the
|
|
maximum allowable increase in the refresh interval, R, to
|
|
prevent state timeout while changing R. R is increased by
|
|
this fraction until it reaches the new desired value."
|
|
DEFVAL { 10 }
|
|
::= { prvtRsvpProductEntry 11 }
|
|
|
|
prvtRsvpProductRfrshSlewNumerator OBJECT-TYPE
|
|
SYNTAX Integer32 (1..214783647)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The numerator of the fraction, SlewMax, which is the maximum
|
|
allowable increase in the refresh interval, R, to prevent
|
|
state timeout while changing R. R is increased by this
|
|
fraction until it reaches the new desired value."
|
|
DEFVAL { 3 }
|
|
::= { prvtRsvpProductEntry 12 }
|
|
|
|
prvtRsvpProductBlockadeMultiple OBJECT-TYPE
|
|
SYNTAX Integer32 (1..214783647)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The RSVP value, Kb, which is the number of refresh timeout
|
|
periods after which blockade state is deleted."
|
|
DEFVAL { 2 }
|
|
::= { prvtRsvpProductEntry 13 }
|
|
|
|
prvtRsvpProductSocketBufPoolSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of pre-reserved buffers available for sending
|
|
sockets data. This is used to pace the sockets data flows."
|
|
DEFVAL { 8 }
|
|
::= { prvtRsvpProductEntry 14 }
|
|
|
|
prvtRsvpProductSwitchBufPoolSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of pre-reserved buffers available for programming
|
|
the switch. This is used to ensure programming operations do
|
|
not fail in buffer shortage conditions."
|
|
DEFVAL { 8 }
|
|
::= { prvtRsvpProductEntry 15 }
|
|
|
|
prvtRsvpProductTeMibBufPoolSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of pre-reserved buffers available for signalling
|
|
TE-MIB. This is used to ensure signals are not lost in buffer
|
|
shortage conditions."
|
|
DEFVAL { 8 }
|
|
::= { prvtRsvpProductEntry 16 }
|
|
|
|
prvtRsvpProductRoutingBufPoolSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of pre-reserved buffers available for route
|
|
queries. This is used to ensure re-routing of many LSPs does
|
|
not fail in buffer shortage conditions."
|
|
DEFVAL { 8 }
|
|
::= { prvtRsvpProductEntry 17 }
|
|
|
|
prvtRsvpProductLSPSetupPriority OBJECT-TYPE
|
|
SYNTAX Integer32 (0..7)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The setup priority to apply to LSPs which are not
|
|
signalling this parameter. 0 represents the highest
|
|
priority, 7 the lowest. The value of this object must be
|
|
numerically more or equal (so lower or equal priority)
|
|
than the value of the holding priority object."
|
|
DEFVAL { 4 }
|
|
::= { prvtRsvpProductEntry 18 }
|
|
|
|
prvtRsvpProductLSPHoldingPriority OBJECT-TYPE
|
|
SYNTAX Integer32 (0..7)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The holding priority to apply to LSPs which are not
|
|
signalling this parameter. 0 represents the highest
|
|
priority, 7 the lowest. The value of this object must be
|
|
numerically less or equal (so higher or equal priority)
|
|
than the value of the holding priority object."
|
|
DEFVAL { 3 }
|
|
::= { prvtRsvpProductEntry 19 }
|
|
|
|
prvtRsvpProductAdminStatus OBJECT-TYPE
|
|
SYNTAX PrvtRsvpAdminStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The desired administrative state of the RSVP entity."
|
|
DEFVAL { up }
|
|
::= { prvtRsvpProductEntry 20 }
|
|
|
|
prvtRsvpProductOperStatus OBJECT-TYPE
|
|
SYNTAX PrvtRsvpOperStatus
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current operational state of this instance of PRVT-RSVP."
|
|
::= { prvtRsvpProductEntry 21 }
|
|
|
|
prvtRsvpProductRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Used to create and delete a PRVT-RSVP Product Table entry.
|
|
When this object is set to 'active', only the
|
|
prvtRsvpProductAdminStatus object in the row may be modified."
|
|
DEFVAL { active }
|
|
::= { prvtRsvpProductEntry 22 }
|
|
|
|
prvtRsvpProductLsrIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of the PRVT-LMGR product instance which this
|
|
PRVT-RSVP is to join to as its LDB interface provider. If
|
|
this value is not specified, or the value of this object
|
|
is 0, PRVT-RSVP will use the prvtRsvpProductIndex value as the
|
|
Lsr index when joining on the LDB interface."
|
|
DEFVAL { 0 }
|
|
::= { prvtRsvpProductEntry 23 }
|
|
|
|
prvtRsvpProductTeMibIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of the TE-MIB product instance which this
|
|
PRVT-RSVP is to join to as its LRA interface provider. If
|
|
this value is not specified, or the value of this object
|
|
is 0, PRVT-RSVP will use the prvtRsvpProductIndex value as the
|
|
TeMib Index when joining on the LRA interface."
|
|
DEFVAL { 0 }
|
|
::= { prvtRsvpProductEntry 24 }
|
|
|
|
prvtRsvpProductMultiStackSupport OBJECT-TYPE
|
|
SYNTAX Integer32 (1..3)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A flag to indicate if multiple RSVP stacks are present
|
|
in the same system as the current one and, if so, how
|
|
they are supported. If set to PHOP, Path messages are
|
|
forwarded to PRVT-RSVP with the Previous Hop value set as
|
|
the hop prior to the incoming interface, not as the next
|
|
hop interface as normal. If set to LIH, the hardware
|
|
location of the current RSVP stack is used as the LIH in
|
|
the HOP object."
|
|
DEFVAL { 1 }
|
|
::= { prvtRsvpProductEntry 25 }
|
|
|
|
prvtRsvpProductUseHopByHop OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A flag to indicate that PRVT-RSVP should use the hop by hop
|
|
addressing scheme for PATH and PATH-TEAR messages it
|
|
sends. If set then the IP addresses used in the IP header
|
|
of PATH messages forwarded by PRVT-RSVP set source as the
|
|
local outgoing interface IP address, and destination as
|
|
the next hop router IP address."
|
|
DEFVAL { false }
|
|
::= { prvtRsvpProductEntry 26 }
|
|
|
|
prvtRsvpProductUseNotify OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A flag to indicate that PRVT-RSVP should attempt to insert
|
|
a Notify Request object in all Path requests that is sends
|
|
as ingress and all Resv requests that it sends as egress.
|
|
The precise behavior is modified by a user exit called by
|
|
the RSVP code.
|
|
|
|
This field is not used unless the mplsTunnelUpNotRecip or
|
|
mplsTunnelDownNotRecip fields in TE-MIB are set to 0.0.0.0."
|
|
DEFVAL { false }
|
|
::= { prvtRsvpProductEntry 27 }
|
|
|
|
prvtRsvpProductNotifyRRDecay OBJECT-TYPE
|
|
SYNTAX Integer32 (0..100)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The percentage increase in the rapid retransmission
|
|
interval for each consecutive unacknowledged RSVP Notify
|
|
message. A value of 0 indicates a constant retransmission
|
|
rate."
|
|
DEFVAL { 100 }
|
|
::= { prvtRsvpProductEntry 28 }
|
|
|
|
prvtRsvpProductNotifyRRInterval OBJECT-TYPE
|
|
SYNTAX Integer32 (1000..2147483647)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interval in milliseconds before a Notify message is
|
|
first resent if no acknowledgement is received."
|
|
DEFVAL { 2000 }
|
|
::= { prvtRsvpProductEntry 29 }
|
|
|
|
prvtRsvpProductNotifyRRLimit OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of times a Notify message is resent if
|
|
no acknowledgement is received."
|
|
DEFVAL { 2 }
|
|
::= { prvtRsvpProductEntry 30 }
|
|
|
|
prvtRsvpProductAllowIPEncap OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A flag to indicate that PRVT-RSVP should support the use of
|
|
IP encapsulation of RSVP packets, which are required for
|
|
out-of-band signaling. If set, then PRVT-RSVP will accept
|
|
incoming RSVP packets that are IP encapsulated, and will
|
|
IP encapsulate outgoing packets whenever the IP routing
|
|
stub indicates that it is required for a particular route."
|
|
DEFVAL { false }
|
|
::= { prvtRsvpProductEntry 31 }
|
|
|
|
prvtRsvpProductProtocolExtensions OBJECT-TYPE
|
|
SYNTAX BITS { bypassFastReroute(0),
|
|
detourFastReroute(1),
|
|
noResAffOnInIf(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies which extensions to the standard RSVP-TE protocol
|
|
are enabled. For fully standards-compliant behavior, set
|
|
this parameter to zero (no bits set). To enable specific
|
|
non-standard protocol extensions, set this parameter to the
|
|
bitwise OR of whichever of the following behaviors you wish
|
|
to enable.
|
|
|
|
- bypassFastReroute: Enable support for facility fast reroute
|
|
protection of LSPs (bypass LSP protection). This flag is
|
|
deprecated in favour of the
|
|
prvtRsvpProductFrrFacAdminStatus field which can be
|
|
modified while RSVP is admin up, however either field can be
|
|
used. When this flag is set RSVP automatically sets the
|
|
prvtRsvpProductFrrFacAdminStatus.
|
|
|
|
- detourFastReroute: Enable support for one-to-one fast
|
|
reroute protection of LSPs (detour LSP protection).
|
|
|
|
- noResAffOnInIf: Disable resource affinity checking on
|
|
incoming interfaces for LSPs. If this flag is set, RSVP
|
|
will accept Path messages which use invalid resource
|
|
affinities for the incoming interface used by the LSP."
|
|
|
|
DEFVAL { { } }
|
|
::= { prvtRsvpProductEntry 32 }
|
|
|
|
prvtRsvpProductPSRFlags OBJECT-TYPE
|
|
SYNTAX BITS { pathErrPSRSet(0),
|
|
pathErrPSRNotSet(1),
|
|
ldbCommonRcvd(2),
|
|
ldbPreempted(3),
|
|
routingError(4),
|
|
invalidPathMsg(5),
|
|
sessionExpired(6),
|
|
unableToRepairRoute(7),
|
|
unableToRepairIf(8),
|
|
reachedRetryLimit(9),
|
|
unableToRefresh(10),
|
|
resvErrTurnaround(11),
|
|
incomingIfDown(12),
|
|
outgoingIfDown(13)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field is used by PRVT-RSVP to determine whether it
|
|
should set the Path State Removed flag on a PathErr (and
|
|
therefore remove corresponding state and generate a
|
|
PathTear). Each bit of this flags field corresponds to a
|
|
situation where PRVT-RSVP may generate a PathErr. Setting a
|
|
particular bit will result in PRVT-RSVP removing state,
|
|
setting the Path State Removed flag and generating a
|
|
PathTear in that corresponding situation. The possible
|
|
bit values are
|
|
|
|
- pathErrPSRSet: PRVT-RSVP has received a PathErr message
|
|
with the Path State Removed flag set.
|
|
|
|
- pathErrPSRNotSet: PRVT-RSVP has received a PathErr message
|
|
with the Path State Removed flag unset.
|
|
|
|
- ldbCommonRcvd: PRVT-RSVP has received a negative response
|
|
to an ATG_LDB_RESERVE_LSP_XC or ATG_LDB_CONNECT_LSP_XC
|
|
message.
|
|
|
|
- ldbPreempted: PRVT-RSVP has received a Preemption message
|
|
from Label Manager.
|
|
|
|
- routingError: PRVT-RSVP has received a Negative response
|
|
to an ATG_IPR_QUERY_ROUTE message.
|
|
|
|
- invalidPathMsg: PRVT-RSVP has received an invalid Path
|
|
message.
|
|
|
|
- sessionExpired: A session in PRVT-RSVP has expired.
|
|
|
|
- unableToRepairRoute: A route has been removed and
|
|
PRVT-RSVP is unable to start local repair.
|
|
|
|
- unableToRepairIf: An interface has been removed and
|
|
PRVT-RSVP is unable start local repair.
|
|
|
|
- reachedRetryLimit: An initial Path Message has reached
|
|
its retry limit.
|
|
|
|
- unableToRefresh: PRVT-RSVP has been unable to refresh an
|
|
LSP.
|
|
|
|
- resvErrTurnaround: PRVT-RSVP has received a ResvErr at the
|
|
Egress node containing a REROUTING object and this is to
|
|
be turned round into a PathErr.
|
|
|
|
- incomingIfDown: The incoming MPLS data interface for
|
|
an LSP has been deactivated.
|
|
|
|
- outgoingIfDown: The outgoing MPLS data interface for
|
|
an LSP has been deactivated."
|
|
|
|
DEFVAL { {} }
|
|
::= { prvtRsvpProductEntry 33 }
|
|
|
|
prvtRsvpProductInitPathRRDecay OBJECT-TYPE
|
|
SYNTAX Integer32 (0..100)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The percentage increase in the rapid
|
|
retransmission interval for each consecutive
|
|
unacknowledged RSVP Initial Path message. A value of 0
|
|
indicates a constant retransmission rate.
|
|
|
|
A Path message is treated as an initial Path if it is the
|
|
Path message which creates the LSP or a Path refresh
|
|
message which requires re-routing."
|
|
DEFVAL { 100 }
|
|
::= { prvtRsvpProductEntry 34 }
|
|
|
|
prvtRsvpProductInitPathRRInterval OBJECT-TYPE
|
|
SYNTAX Integer32 (1000..2147483647)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The rapid retransmission interval in milliseconds before
|
|
an Initial Path message is first resent if no
|
|
acknowledgement is received.
|
|
|
|
A Path message is treated as an initial Path if it is the
|
|
Path message which creates the LSP or a Path refresh
|
|
message which requires re-routing."
|
|
DEFVAL { 2000 }
|
|
::= { prvtRsvpProductEntry 35 }
|
|
|
|
prvtRsvpProductInitPathRRLimit OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of times an Initial Path message is
|
|
resent if no acknowledgement is received.
|
|
|
|
A Path message is treated as an initial Path if it is the
|
|
Path message which creates the LSP or a Path refresh
|
|
message which requires re-routing."
|
|
DEFVAL { 2 }
|
|
::= { prvtRsvpProductEntry 36 }
|
|
|
|
prvtRsvpProductEnableUni OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A flag to indicate whether the local node supports UNI
|
|
signaling messages."
|
|
DEFVAL { false }
|
|
::= { prvtRsvpProductEntry 37 }
|
|
|
|
prvtRsvpProductRestartCapable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A flag to indicate whether the local node should advertise
|
|
itself as restart capable. This should be set to true
|
|
if fault-tolerance is enabled in PRVT-MPLS or if the node
|
|
supports recovery procedures."
|
|
DEFVAL { false }
|
|
::= { prvtRsvpProductEntry 38 }
|
|
|
|
prvtRsvpProductRestartTime OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time in milliseconds that the local node takes to
|
|
restart RSVP-TE and the communication channel used for
|
|
RSVP communication. This is advertised to neighbors in
|
|
the Restart_Cap object in Hello messages.
|
|
|
|
The value chosen should be large enough for RSVP to be
|
|
terminated and restarted. If fault-tolerance is enabled
|
|
in PRVT-MPLS, then sufficient time should be allowed for
|
|
RSVP to fail over, which should include the time taken for
|
|
the audit phase to complete.
|
|
|
|
A value of 0xFFFFFFFF may be configured to imply an infinite
|
|
restart time.
|
|
|
|
Only used if prvtRsvpProductRestartCapable is set to true.
|
|
|
|
Note that the maximum real time value that can be set is
|
|
0x7FFFFFFF. If a value is requested greater than
|
|
0x7FFFFFFF and less than 0xFFFFFFFF the request will be
|
|
rejected."
|
|
|
|
DEFVAL { 10000 }
|
|
::= { prvtRsvpProductEntry 39 }
|
|
|
|
prvtRsvpProductRecoveryTime OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The period of time in milliseconds that the local node
|
|
would like neighbors to take to resyncronize RSVP and
|
|
MPLS forwarding information after the re-establishment of
|
|
Hello connectivity. This is advertised to neighbors in
|
|
the Restart_Cap object in Hello messages.
|
|
|
|
A value of zero indicates that the node does not support
|
|
resynchronization following failure of the local node.
|
|
|
|
A value of 0xFFFFFFFF indicates an infinite recovery time.
|
|
|
|
Note that if fault-tolerance is not enabled in PRVT-MPLS and
|
|
the node is acting as an ingress for tunnels, then any
|
|
ingress tunnels that need to be recovered should be
|
|
configured during this recovery period. These tunnels
|
|
should be configured in TE-MIB with the admin_status set
|
|
to UP, otherwise they will be lost from the switch
|
|
controller.
|
|
|
|
Only used if prvtRsvpProductRestartCapable is set to true.
|
|
|
|
Note that the maximum real time value that can be set is
|
|
0x7FFFFFFF. If a value is requested greater than
|
|
0x7FFFFFFF and less than 0xFFFFFFFF the request will be
|
|
rejected."
|
|
|
|
DEFVAL { 10000 }
|
|
::= { prvtRsvpProductEntry 40 }
|
|
|
|
prvtRsvpProductMinPeerRestart OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mininum period of time in milliseconds that RSVP
|
|
should wait for a restart capable neighbor to regain
|
|
Hello connectivity before invoking procedures related to
|
|
communication loss.
|
|
|
|
RSVP will wait for the maximum of this time and the
|
|
restart_time advertised in the RESTART_CAP object in Hello
|
|
messages from the neighbor."
|
|
DEFVAL { 0 }
|
|
::= { prvtRsvpProductEntry 41 }
|
|
|
|
prvtRsvpProductGracefulDelTimeout OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time in milliseconds that PRVT-MPLS will wait for
|
|
graceful deletion to complete before the forced deletion
|
|
procedure is used instead."
|
|
DEFVAL { 30000 }
|
|
::= { prvtRsvpProductEntry 42 }
|
|
|
|
prvtRsvpProductEgressDelBehavior OBJECT-TYPE
|
|
SYNTAX INTEGER { delWithPathErr(1),
|
|
delWithResvD(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the action that an egress node should take in
|
|
the graceful deletion procedure on receipt of a Path
|
|
message containing an Admin Status object with the D
|
|
and R bits set. The possible values are:-
|
|
|
|
- delWithPathErr: Send a PathErr message with the
|
|
Path_State_removed flag set.
|
|
|
|
- delWithResvD: Send a Resv message containing an Admin
|
|
Status object with the D bit set."
|
|
DEFVAL { delWithPathErr }
|
|
::= { prvtRsvpProductEntry 43 }
|
|
|
|
prvtRsvpProductEnabUniConnSplicing OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A flag to indicate whether UNI-N nodes should allow the
|
|
splicing of UNI connections with proprietary ON
|
|
connections."
|
|
DEFVAL { false }
|
|
::= { prvtRsvpProductEntry 44 }
|
|
|
|
prvtRsvpProductFastRerouteCaps OBJECT-TYPE
|
|
SYNTAX BITS { fastReroutePLR(0),
|
|
fastRerouteMP(1),
|
|
fastRerouteDetourRestart(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies what fast reroute capabilities are enabled
|
|
on this node. This field is only valid if the fast
|
|
reroute extension is enabled in the
|
|
prvtRsvpProductProtocolExtensions field above.
|
|
|
|
- PLR: Node provides fast reroute point of local repair
|
|
capability.
|
|
|
|
- MP: Node provides fast reroute merge point capability.
|
|
|
|
- DetourRestart: Node implements some protocol extensions
|
|
to recover detour fast reroute LSPs after a node restart
|
|
or an adjacent node restart. This flag is only valid if
|
|
detourFastReroute flag is set in the
|
|
prvtRsvpProductProtocolExtensions field above.
|
|
|
|
Note that a node can still perform some FRR processing
|
|
even if the PLR and MP flags are clear (at a detour transit
|
|
for instance)."
|
|
DEFVAL { { } }
|
|
::= { prvtRsvpProductEntry 45 }
|
|
|
|
prvtRsvpProductFastRroutBkpRtryInt OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When this node is a PLR, this field specifies the period
|
|
that the node should wait before retrying the setup of a
|
|
backup LSP which failed last time because no route was
|
|
available. In the case that a backup LSP is set up but an
|
|
error is received from upstream, setup will be attempted
|
|
again immediately.
|
|
This field is only valid if this node is defined as PLR
|
|
capable in the _prvtRsvpProductFastRerouteCapabilities_
|
|
field above."
|
|
DEFVAL { 30000 }
|
|
::= { prvtRsvpProductEntry 46 }
|
|
|
|
prvtRsvpProductErrorActionFlags OBJECT-TYPE
|
|
SYNTAX BITS { eafTearStateOnLSIErr(0)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field is used by PRVT-RSVP to determine whether it
|
|
should take any special action following certain types of
|
|
local errors. Each bit of this flags field corresponds to
|
|
an error and a corresponding action.
|
|
|
|
When one of these errors occurs, the relevant bit flag is
|
|
checked - if set, the specified action is taken; if not
|
|
set, the normal action is taken according the RSVP
|
|
protocol. The possible bit values are the following.
|
|
|
|
- eafTearStateOnLSIErr: When PRVT-RSVP receives a negative
|
|
response to an ATG_LDB_CONNECT_LSP_XC message on a UNI
|
|
node, the Path state is torn down."
|
|
|
|
DEFVAL { {} }
|
|
::= { prvtRsvpProductEntry 47 }
|
|
|
|
prvtRsvpProductEnableNni OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(1),
|
|
enabled(2),
|
|
disabling(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A flag to indicate whether the local node supports NNI
|
|
signaling messages."
|
|
DEFVAL { disabled }
|
|
::= { prvtRsvpProductEntry 48 }
|
|
|
|
prvtRsvpProductBehaviorFlags OBJECT-TYPE
|
|
SYNTAX BITS { enableTTLMatch(0)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies some detailed aspects of the behavior of
|
|
PRVT-RSVP. This field may be changed while _admin_status_
|
|
is up.
|
|
|
|
- enableTTLMatch: Whether to discard received RSVP
|
|
packets sent with the Router Alert option if the IP and
|
|
RSVP TTL values do not match. In certain circumstances
|
|
TTL comparison can identify RSVP service breaks, and allow
|
|
the discarding of packets that would otherwise disrupt
|
|
installed LSPs.
|
|
|
|
This option has no effect for Out Of Band operation.
|
|
|
|
This option should be left disabled for LSP hierarchy
|
|
operation (LSPs set up over existing LSPs) and for
|
|
Facility Fast Reroute (which sets up backup LSPs over
|
|
existing bypass LSPs)."
|
|
|
|
DEFVAL { {} }
|
|
::= { prvtRsvpProductEntry 49 }
|
|
|
|
prvtRsvpProductLabelSetStyle OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
excludeLabelHeader(1),
|
|
includeLabelHeader(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the style of LABEL_SET object that should be
|
|
used. RFCs 3741 and 3743 are unclear whether the
|
|
LABEL_SET object should include LABEL headers. The
|
|
correct interpretation is that the header should not be
|
|
present, but there are implementations that include the
|
|
LABEL header, so this option is included for compatibility
|
|
with these implementations.
|
|
|
|
- excludeLabelHeader: The LABEL_SET object contains
|
|
concatenated LABEL values without the object headers.
|
|
|
|
- includeLabelHeader: The LABEL_SET object contains
|
|
concatenated LABEL objects with the object headers."
|
|
DEFVAL { excludeLabelHeader }
|
|
::= { prvtRsvpProductEntry 50 }
|
|
|
|
prvtRsvpProductLabelSetOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
excludeLabelHeader(1),
|
|
includeLabelHeader(2),
|
|
goingToExclude(3),
|
|
goingToInclude(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current operational state of Label Set style.
|
|
- excludeLabelHeader: The LABEL_SET object contains
|
|
concatenated LABEL values without the object headers.
|
|
|
|
- includeLabelHeader: The LABEL_SET object contains
|
|
concatenated LABEL objects with the object headers.
|
|
|
|
- goingToExclude: The Label Set Style is being changed
|
|
from includeLabelHeader to excludeLabelHeader.
|
|
|
|
- goingToInclude: The Label Set Style is being changed
|
|
from excludeLabelHeader to includeLabelHeader."
|
|
::= { prvtRsvpProductEntry 51 }
|
|
|
|
prvtRsvpProductLabelSetTrapEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to enable traps for the Label
|
|
Set style oper_status object."
|
|
DEFVAL { false }
|
|
::= { prvtRsvpProductEntry 52 }
|
|
|
|
prvtRsvpProductLabelSetChngAct OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the action to take when the value of
|
|
prvtRsvpProductLabelSetStyle is changed.
|
|
|
|
- leaveLSPs: All nodes should suppress refreshes and
|
|
switch to the new format while refreshes are suppressed.
|
|
|
|
- tearLSPs: Any LSPs using label sets will be deleted
|
|
before switching all nodes to the new format, and any new
|
|
LSPs using label sets will be dropped/rejected until the
|
|
switch is complete."
|
|
DEFVAL { 1 }
|
|
::= { prvtRsvpProductEntry 53 }
|
|
|
|
prvtRsvpProductExtPrtAdminStatus OBJECT-TYPE
|
|
SYNTAX PrvtRsvpAdminStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The desired operational state of support for the extended
|
|
PROTECTION object defined in
|
|
draft-lang-ccamp-gmpls-recovery-e2e-signaling."
|
|
DEFVAL { down }
|
|
::= { prvtRsvpProductEntry 54 }
|
|
|
|
prvtRsvpProductUniIncSonetProfile OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..1)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether Sonet Profile is included on messages
|
|
to or from a UNI-C node."
|
|
DEFVAL { 0 }
|
|
::= { prvtRsvpProductEntry 55 }
|
|
|
|
prvtRsvpProductFrrFacAdminStatus OBJECT-TYPE
|
|
SYNTAX PrvtRsvpAdminStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether backup LSPs can be put in place for LSPs
|
|
requesting FRR using the facility method.
|
|
|
|
Setting this to UP means that LSPs that request FRR using
|
|
the facility method can have protection at this node.
|
|
Existing LSPs that request FRR facility protection will have
|
|
protection put in place when the next Path refresh is
|
|
received.
|
|
|
|
Setting this to DOWN means that LSPs that request FRR using
|
|
the facility method will not be protected at this node.
|
|
Existing LSPs that have FRR facility protection will lose
|
|
that protection, and if the LSP had been rerouted to use the
|
|
backup LSP then the protected LSP will be lost.
|
|
|
|
This field replaces the bypassFastReroute flag on the protocol
|
|
extensions field in this MIB (although the bypassFastReroute flag
|
|
is still supported for backwards compatibility). It can be
|
|
modified while RSVP is oper_status UP or DOWN. When this field
|
|
is changed the bypassFastReroute flag is automatically modified
|
|
to mirror the change."
|
|
|
|
DEFVAL { down }
|
|
::= { prvtRsvpProductEntry 56 }
|
|
|
|
prvtRsvpProductFrrFacOperStatus OBJECT-TYPE
|
|
SYNTAX PrvtRsvpOperStatus
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current operational status for FRR Facility support.
|
|
When this is UP backup LSPs will be put in place, when this
|
|
is down backup LSPs will not be put in place and there will
|
|
be no LSPs that have backup LSPs."
|
|
::= { prvtRsvpProductEntry 57 }
|
|
|
|
prvtRsvpProductIpv6AdminStatus OBJECT-TYPE
|
|
SYNTAX PrvtRsvpAdminStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether the local node supports IPv6 LSPs.
|
|
|
|
Setting this to UP means that this node supports IPv6 LSPs
|
|
being set up to, from and through this node.
|
|
|
|
Setting this to DOWN means that IPv6 LSPs are NOT supported by
|
|
this node. Existing IPv6 LSPs for which this node is the
|
|
ingress, egress or transit are torn down.
|
|
|
|
This field can be modified while RSVP is oper_status UP or
|
|
DOWN.
|
|
|
|
The value of this field MUST match the value of the
|
|
dcMplsTeMibRsvpIpv6AdminStatus field in the
|
|
prvtMplsTeMibEntityTable."
|
|
|
|
DEFVAL { down }
|
|
::= { prvtRsvpProductEntry 58 }
|
|
|
|
prvtRsvpProductIpv6OperStatus OBJECT-TYPE
|
|
SYNTAX PrvtRsvpOperStatus
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current operational status for IPv6 support. When
|
|
this is UP IPv6 LSPs can be set up to from or through this
|
|
node. When this is down there will be no active IPv6 LSPs."
|
|
::= { prvtRsvpProductEntry 59 }
|
|
|
|
prvtRsvpProductAPIIpv6Address OBJECT-TYPE
|
|
SYNTAX InetAddressIPv6
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Management assigned IPv6 address used to identify the
|
|
(internal) LRAPI interface between RSVP and TE-MIB
|
|
components.
|
|
|
|
The configured API IPv6 address MUST not be a real address
|
|
in the network. It is recommended that this is set to a
|
|
non-zero reserved address value. This MUST be an address
|
|
with global scope.
|
|
|
|
If multi-stack support is set to PHOP, this address must
|
|
be unique for each RSVP stack in the node.
|
|
|
|
The same address(es) can be used on all nodes in the
|
|
network."
|
|
::= { prvtRsvpProductEntry 60 }
|
|
|
|
-- Diagnostics table
|
|
-- This table is used to control diagnostic requests and responses.
|
|
|
|
prvtRsvpDiagnosticTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PrvtRsvpDiagnosticEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of sessions that are being diagnosed."
|
|
::= { prvtRsvpObjects 2 }
|
|
|
|
prvtRsvpDiagnosticEntry OBJECT-TYPE
|
|
SYNTAX PrvtRsvpDiagnosticEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry represents a session that is being diagnosed."
|
|
INDEX { prvtRsvpDiagProductIndex,
|
|
prvtRsvpDiagRequestIndex }
|
|
::= { prvtRsvpDiagnosticTable 1 }
|
|
|
|
PrvtRsvpDiagnosticEntry ::= SEQUENCE {
|
|
prvtRsvpDiagProductIndex PrvtRsvpIndex,
|
|
prvtRsvpDiagRequestIndex PrvtRsvpDiagReqIndex,
|
|
prvtRsvpDiagReqsInProgress Unsigned32,
|
|
prvtRsvpDiagSessionEndPoint IpAddress,
|
|
prvtRsvpDiagSessionTunnelId Unsigned32,
|
|
prvtRsvpDiagSessionExtTunnelId Unsigned32,
|
|
prvtRsvpDiagLastHop IpAddress,
|
|
prvtRsvpDiagSender IpAddress,
|
|
prvtRsvpDiagMaxHops Integer32,
|
|
prvtRsvpDiagHopByHopReply TruthValue
|
|
-- prvtRsvpDiagRowStatus RowStatus
|
|
}
|
|
|
|
prvtRsvpDiagProductIndex OBJECT-TYPE
|
|
SYNTAX PrvtRsvpIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of the PRVT-RSVP product that is handling this query."
|
|
::= { prvtRsvpDiagnosticEntry 1 }
|
|
|
|
prvtRsvpDiagRequestIndex OBJECT-TYPE
|
|
SYNTAX PrvtRsvpDiagReqIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of this prvtRsvpDiagnosticEntry. This corresponds to a
|
|
particular session being diagnosed and is an arbitrary value,
|
|
defined on row creation."
|
|
::= { prvtRsvpDiagnosticEntry 2 }
|
|
|
|
prvtRsvpDiagReqsInProgress OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of outstanding diagnostic requests relating to this
|
|
session."
|
|
::= { prvtRsvpDiagnosticEntry 3 }
|
|
|
|
prvtRsvpDiagSessionEndPoint OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the tunnel end point, from the LSP_TUNNEL_IPv4
|
|
session object."
|
|
::= { prvtRsvpDiagnosticEntry 4 }
|
|
|
|
prvtRsvpDiagSessionTunnelId OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The tunnel ID, from the LSP_TUNNEL_IPv4 session object."
|
|
::= { prvtRsvpDiagnosticEntry 5 }
|
|
|
|
prvtRsvpDiagSessionExtTunnelId OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The extended tunnel ID, from the LSP_TUNNEL_IPv4 session object."
|
|
::= { prvtRsvpDiagnosticEntry 6 }
|
|
|
|
prvtRsvpDiagLastHop OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the last hop to be queried. This is the address
|
|
to which the DREQ message is first sent."
|
|
::= { prvtRsvpDiagnosticEntry 7 }
|
|
|
|
prvtRsvpDiagSender OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the sender for the specified session."
|
|
::= { prvtRsvpDiagnosticEntry 8 }
|
|
|
|
prvtRsvpDiagMaxHops OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of hops to diagnose."
|
|
::= { prvtRsvpDiagnosticEntry 9 }
|
|
|
|
prvtRsvpDiagHopByHopReply OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A flag to indicate that DREPs should be returned hop-by-
|
|
hop using the reverse of the path taken by the DREQ."
|
|
::= { prvtRsvpDiagnosticEntry 10 }
|
|
|
|
-- prvtRsvpDiagRowStatus OBJECT-TYPE
|
|
-- SYNTAX RowStatus
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Used to create or delete a PRVT-RSVP Diagnostic Table entry."
|
|
-- ::= { prvtRsvpDiagnosticEntry 11 }
|
|
|
|
|
|
-- Diagnostic node table
|
|
-- This table is used to present diagnostic information about nodes in a session.
|
|
|
|
prvtRsvpDiagNodeTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PrvtRsvpDiagNodeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of nodes within a session that is being diagnosed.
|
|
|
|
External management can extract information
|
|
from this table, but cannot modify information in it."
|
|
|
|
::= { prvtRsvpObjects 3 }
|
|
|
|
prvtRsvpDiagNodeEntry OBJECT-TYPE
|
|
SYNTAX PrvtRsvpDiagNodeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry represents a node within a session that is being diagnosed."
|
|
INDEX { prvtRsvpDiagNodeProductIndex,
|
|
prvtRsvpDiagNodeRequestIndex,
|
|
prvtRsvpDiagNodeIndex }
|
|
::= { prvtRsvpDiagNodeTable 1 }
|
|
|
|
PrvtRsvpDiagNodeEntry ::= SEQUENCE {
|
|
prvtRsvpDiagNodeProductIndex PrvtRsvpIndex,
|
|
prvtRsvpDiagNodeRequestIndex PrvtRsvpDiagReqIndex,
|
|
prvtRsvpDiagNodeIndex PrvtRsvpDiagNodeIndexType,
|
|
prvtRsvpDiagNodeType PrvtRsvpDiagNodeTypeVal,
|
|
-- Below is the information that is returned in a DIAG_RESPONSE
|
|
prvtRsvpDiagNodeDreqArrivalTime Unsigned32,
|
|
prvtRsvpDiagNodeIncomingIfAddr IpAddress,
|
|
prvtRsvpDiagNodeOutgoingIfAddr IpAddress,
|
|
prvtRsvpDiagNodePrevHopAddr IpAddress,
|
|
prvtRsvpDiagNodeDTTL Integer32,
|
|
prvtRsvpDiagNodeMFlag TruthValue,
|
|
prvtRsvpDiagNodeRErr Integer32,
|
|
prvtRsvpDiagNodeKValue Integer32,
|
|
prvtRsvpDiagNodeTimerValue Integer32,
|
|
-- Below are the objects that can be appended to a DIAG_RESPONSE
|
|
prvtRsvpDiagRsvpHopAddr IpAddress,
|
|
prvtRsvpDiagRsvpHopLIH Unsigned32,
|
|
prvtRsvpDiagSenderTpltAddress IpAddress,
|
|
prvtRsvpDiagSenderTpltLSPId Integer32,
|
|
-- Info from SENDER_TSPEC and ADSPEC is covered by FLOWSPEC
|
|
prvtRsvpDiagFlowSpecCLBktRate Unsigned32,
|
|
prvtRsvpDiagFlowSpecCLBktDep Unsigned32,
|
|
prvtRsvpDiagFlowSpecCLPkDataRate Unsigned32,
|
|
prvtRsvpDiagFlowSpecCLMinPolUnit Unsigned32,
|
|
prvtRsvpDiagFlowSpecCLMaxPktSize Unsigned32,
|
|
prvtRsvpDiagFlowSpecGQBktRate Unsigned32,
|
|
prvtRsvpDiagFlowSpecGQBktDep Unsigned32,
|
|
prvtRsvpDiagFlowSpecGQPkDataRate Unsigned32,
|
|
prvtRsvpDiagFlowSpecGQMinPolUnit Unsigned32,
|
|
prvtRsvpDiagFlowSpecGQMaxPktSize Unsigned32,
|
|
prvtRsvpDiagFlowSpecGQRate Unsigned32,
|
|
prvtRsvpDiagFlowSpecGQSlack Unsigned32,
|
|
prvtRsvpDiagFlowSpecCoSCoS Integer32,
|
|
prvtRsvpDiagFlowSpecCoSMTU Integer32,
|
|
prvtRsvpDiagFilterSpecAddress IpAddress,
|
|
prvtRsvpDiagFilterSpecLSPId Integer32,
|
|
prvtRsvpDiagConfirmRcvAddr IpAddress,
|
|
prvtRsvpDiagStyle Unsigned32
|
|
-- The SCOPE object is omitted
|
|
}
|
|
|
|
prvtRsvpDiagNodeProductIndex OBJECT-TYPE
|
|
SYNTAX PrvtRsvpIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of the PRVT-RSVP product that is handling this query."
|
|
::= { prvtRsvpDiagNodeEntry 1 }
|
|
|
|
prvtRsvpDiagNodeRequestIndex OBJECT-TYPE
|
|
SYNTAX PrvtRsvpDiagReqIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of the corresponding request in prvtRsvpDiagnosticTable."
|
|
::= { prvtRsvpDiagNodeEntry 2 }
|
|
|
|
prvtRsvpDiagNodeIndex OBJECT-TYPE
|
|
SYNTAX PrvtRsvpDiagNodeIndexType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of this prvtRsvpDiagNodeEntry. This is equivalent to the
|
|
hop number, with 1 being the ingress."
|
|
::= { prvtRsvpDiagNodeEntry 3 }
|
|
|
|
prvtRsvpDiagNodeType OBJECT-TYPE
|
|
SYNTAX PrvtRsvpDiagNodeTypeVal
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of the node: ingress, transit, egress or missing. Missing
|
|
indicates that no diagnostic response has been received for this
|
|
node, and this entry may in fact represent more than one node."
|
|
::= { prvtRsvpDiagNodeEntry 4 }
|
|
|
|
prvtRsvpDiagNodeDreqArrivalTime OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The arrival time of the DREQ at the node, specified as a 32-bit
|
|
NTP timestamp."
|
|
::= { prvtRsvpDiagNodeEntry 5 }
|
|
|
|
prvtRsvpDiagNodeIncomingIfAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the interface on which message from the sender
|
|
are expected to arrive at this node, or 0 if unknown."
|
|
::= { prvtRsvpDiagNodeEntry 6 }
|
|
|
|
prvtRsvpDiagNodeOutgoingIfAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the interface through which the DREQ arrived
|
|
and to which messages flow from the given sender for the
|
|
specified session address, or 0 if unknown."
|
|
::= { prvtRsvpDiagNodeEntry 7 }
|
|
|
|
prvtRsvpDiagNodePrevHopAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address from which this node receives RSVP PATH messages
|
|
for this source, or 0 if unknown. This is also the address to
|
|
which the DREQ was forwarded."
|
|
::= { prvtRsvpDiagNodeEntry 8 }
|
|
|
|
prvtRsvpDiagNodeDTTL OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of IP hops traversed by the DREQ between the downstream
|
|
RSVP node and this node."
|
|
::= { prvtRsvpDiagNodeEntry 9 }
|
|
|
|
prvtRsvpDiagNodeMFlag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A flag that indicates whether the reservation described by the
|
|
response objects is merged with reservations from other downstream
|
|
interfaces before being forwarded upstream."
|
|
::= { prvtRsvpDiagNodeEntry 10 }
|
|
|
|
prvtRsvpDiagNodeRErr OBJECT-TYPE
|
|
SYNTAX Integer32 (0..7)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The error conditions at this node.
|
|
Bit 3 indicates ROUTE object too big;
|
|
Bit 2 indicates packet too big;
|
|
Bit 1 indicates no PATH state.
|
|
Bit 1 is the least significant bit."
|
|
::= { prvtRsvpDiagNodeEntry 11 }
|
|
|
|
prvtRsvpDiagNodeKValue OBJECT-TYPE
|
|
SYNTAX Integer32 (0..15)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The refresh timer multiple."
|
|
::= { prvtRsvpDiagNodeEntry 12 }
|
|
|
|
prvtRsvpDiagNodeTimerValue OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The local refresh timer value in seconds."
|
|
::= { prvtRsvpDiagNodeEntry 13 }
|
|
|
|
prvtRsvpDiagRsvpHopAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The hop address from the session's RSVP_HOP object."
|
|
::= { prvtRsvpDiagNodeEntry 14 }
|
|
|
|
prvtRsvpDiagRsvpHopLIH OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The LIH from the session's RSVP_HOP object."
|
|
::= { prvtRsvpDiagNodeEntry 15 }
|
|
|
|
prvtRsvpDiagSenderTpltAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The address from the session's SENDER_TEMPLATE object."
|
|
::= { prvtRsvpDiagNodeEntry 16 }
|
|
|
|
prvtRsvpDiagSenderTpltLSPId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The LSP ID from the session's SENDER_TEMPLATE object."
|
|
::= { prvtRsvpDiagNodeEntry 17 }
|
|
|
|
prvtRsvpDiagFlowSpecCLBktRate OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Int-serv controlled load token bucket rate in bytes per second,
|
|
from the session's FLOWSPEC object.
|
|
This value is rounded to the nearest integer."
|
|
::= { prvtRsvpDiagNodeEntry 18 }
|
|
|
|
prvtRsvpDiagFlowSpecCLBktDep OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Int-serv controlled load token bucket depth in bytes,
|
|
from the session's FLOWSPEC object.
|
|
This value is rounded to the nearest integer."
|
|
::= { prvtRsvpDiagNodeEntry 19 }
|
|
|
|
prvtRsvpDiagFlowSpecCLPkDataRate OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Int-serv controlled load peak data rate in bytes per second,
|
|
from the session's FLOWSPEC object.
|
|
This value is rounded to the nearest integer."
|
|
::= { prvtRsvpDiagNodeEntry 20 }
|
|
|
|
prvtRsvpDiagFlowSpecCLMinPolUnit OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Int-serv controlled load minimum policed unit
|
|
from the session's FLOWSPEC object."
|
|
::= { prvtRsvpDiagNodeEntry 21 }
|
|
|
|
prvtRsvpDiagFlowSpecCLMaxPktSize OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Int-serv controlled load maximum packet size
|
|
from the session's FLOWSPEC object."
|
|
::= { prvtRsvpDiagNodeEntry 22 }
|
|
|
|
prvtRsvpDiagFlowSpecGQBktRate OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Int-serv guaranteed QoS token bucket rate in bytes per second,
|
|
from the session's FLOWSPEC object.
|
|
This value is rounded to the nearest integer."
|
|
::= { prvtRsvpDiagNodeEntry 23 }
|
|
|
|
prvtRsvpDiagFlowSpecGQBktDep OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Int-serv guaranteed QoS token bucket depth in bytes,
|
|
from the session's FLOWSPEC object.
|
|
This value is rounded to the nearest integer."
|
|
::= { prvtRsvpDiagNodeEntry 24 }
|
|
|
|
prvtRsvpDiagFlowSpecGQPkDataRate OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Int-serv guaranteed QoS peak data rate in bytes per second,
|
|
from the session's FLOWSPEC object.
|
|
This value is rounded to the nearest integer."
|
|
::= { prvtRsvpDiagNodeEntry 25 }
|
|
|
|
prvtRsvpDiagFlowSpecGQMinPolUnit OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Int-serv guaranteed QoS minimum policed unit
|
|
from the session's FLOWSPEC object."
|
|
::= { prvtRsvpDiagNodeEntry 26 }
|
|
|
|
prvtRsvpDiagFlowSpecGQMaxPktSize OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Int-serv guaranteed QoS maximum packet size
|
|
from the session's FLOWSPEC object."
|
|
::= { prvtRsvpDiagNodeEntry 27 }
|
|
|
|
prvtRsvpDiagFlowSpecGQRate OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Int-serv guaranteed QoS rate in bytes per second,
|
|
from the session's FLOWSPEC object.
|
|
This value is rounded to the nearest integer."
|
|
::= { prvtRsvpDiagNodeEntry 28 }
|
|
|
|
prvtRsvpDiagFlowSpecGQSlack OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Int-serv guaranteed QoS slack in microseconds,
|
|
from the session's FLOWSPEC object."
|
|
::= { prvtRsvpDiagNodeEntry 29 }
|
|
|
|
prvtRsvpDiagFlowSpecCoSCoS OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CoS class of service from the session's FLOWSPEC object."
|
|
::= { prvtRsvpDiagNodeEntry 30 }
|
|
|
|
prvtRsvpDiagFlowSpecCoSMTU OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CoS maximum packet size from the session's FLOWSPEC object."
|
|
::= { prvtRsvpDiagNodeEntry 31 }
|
|
|
|
prvtRsvpDiagFilterSpecAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The address from the session's FILTER_SPEC object."
|
|
::= { prvtRsvpDiagNodeEntry 32 }
|
|
|
|
prvtRsvpDiagFilterSpecLSPId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The LSP ID from the session's FILTER_SPEC object."
|
|
::= { prvtRsvpDiagNodeEntry 33 }
|
|
|
|
prvtRsvpDiagConfirmRcvAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The address from the session's CONFIRM object."
|
|
::= { prvtRsvpDiagNodeEntry 34 }
|
|
|
|
prvtRsvpDiagStyle OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The style word from the session's STYLE object."
|
|
::= { prvtRsvpDiagNodeEntry 35 }
|
|
|
|
-- Module compliance.
|
|
|
|
-- conformance
|
|
prvtRsvpConformance OBJECT IDENTIFIER ::= {prvtRsvp 2 }
|
|
|
|
prvtRsvpCompliances OBJECT IDENTIFIER ::= { prvtRsvpConformance 1 }
|
|
prvtRsvpGroups OBJECT IDENTIFIER ::= { prvtRsvpConformance 2 }
|
|
|
|
prvtRsvpCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for the PRVT-RSVP product MIB."
|
|
MODULE
|
|
|
|
GROUP prvtRsvpProductGroup
|
|
DESCRIPTION
|
|
"Product Table Objects."
|
|
|
|
GROUP prvtRsvpDiagGroup
|
|
DESCRIPTION
|
|
"Diagnostic Table Objects."
|
|
|
|
GROUP prvtRsvpDiagNodeGroup
|
|
DESCRIPTION
|
|
"Diag Node Table Objects."
|
|
|
|
::= { prvtRsvpCompliances 1 }
|
|
|
|
prvtRsvpProductGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
prvtRsvpProductASNumber,
|
|
prvtRsvpProductSenderTTL,
|
|
prvtRsvpProductMinTimerPeriod,
|
|
prvtRsvpProductAPIIfIndex,
|
|
prvtRsvpProductAPIAddress,
|
|
prvtRsvpProductAPIRefreshInterval,
|
|
prvtRsvpProductLocalRepairDelay,
|
|
prvtRsvpProductRefreshInterval,
|
|
prvtRsvpProductRefreshMultiple,
|
|
prvtRsvpProductRfrshSlewDenom,
|
|
prvtRsvpProductRfrshSlewNumerator,
|
|
prvtRsvpProductBlockadeMultiple,
|
|
prvtRsvpProductSocketBufPoolSize,
|
|
prvtRsvpProductSwitchBufPoolSize,
|
|
prvtRsvpProductTeMibBufPoolSize,
|
|
prvtRsvpProductRoutingBufPoolSize,
|
|
prvtRsvpProductLSPSetupPriority,
|
|
prvtRsvpProductLSPHoldingPriority,
|
|
prvtRsvpProductAdminStatus,
|
|
prvtRsvpProductOperStatus,
|
|
prvtRsvpProductRowStatus,
|
|
prvtRsvpProductLsrIndex,
|
|
prvtRsvpProductTeMibIndex,
|
|
prvtRsvpProductMultiStackSupport,
|
|
prvtRsvpProductUseHopByHop,
|
|
prvtRsvpProductUseNotify,
|
|
prvtRsvpProductNotifyRRDecay,
|
|
prvtRsvpProductNotifyRRInterval,
|
|
prvtRsvpProductNotifyRRLimit,
|
|
prvtRsvpProductAllowIPEncap,
|
|
prvtRsvpProductProtocolExtensions,
|
|
prvtRsvpProductPSRFlags,
|
|
prvtRsvpProductInitPathRRDecay,
|
|
prvtRsvpProductInitPathRRInterval,
|
|
prvtRsvpProductInitPathRRLimit,
|
|
prvtRsvpProductEnableUni,
|
|
prvtRsvpProductRestartCapable,
|
|
prvtRsvpProductRestartTime,
|
|
prvtRsvpProductRecoveryTime,
|
|
prvtRsvpProductMinPeerRestart,
|
|
prvtRsvpProductGracefulDelTimeout,
|
|
prvtRsvpProductEgressDelBehavior,
|
|
prvtRsvpProductEnabUniConnSplicing,
|
|
prvtRsvpProductFastRerouteCaps,
|
|
prvtRsvpProductFastRroutBkpRtryInt,
|
|
prvtRsvpProductErrorActionFlags,
|
|
prvtRsvpProductEnableNni,
|
|
prvtRsvpProductBehaviorFlags,
|
|
prvtRsvpProductLabelSetStyle,
|
|
prvtRsvpProductLabelSetOperStatus,
|
|
prvtRsvpProductLabelSetTrapEnable,
|
|
prvtRsvpProductLabelSetChngAct,
|
|
prvtRsvpProductExtPrtAdminStatus,
|
|
prvtRsvpProductUniIncSonetProfile,
|
|
prvtRsvpProductFrrFacAdminStatus,
|
|
prvtRsvpProductFrrFacOperStatus,
|
|
prvtRsvpProductIpv6AdminStatus,
|
|
prvtRsvpProductIpv6OperStatus,
|
|
prvtRsvpProductAPIIpv6Address
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Product Table Objects."
|
|
::= { prvtRsvpGroups 2 }
|
|
|
|
prvtRsvpDiagGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
prvtRsvpDiagReqsInProgress,
|
|
prvtRsvpDiagSessionEndPoint,
|
|
prvtRsvpDiagSessionTunnelId,
|
|
prvtRsvpDiagSessionExtTunnelId,
|
|
prvtRsvpDiagLastHop,
|
|
prvtRsvpDiagSender,
|
|
prvtRsvpDiagMaxHops,
|
|
prvtRsvpDiagHopByHopReply
|
|
-- prvtRsvpDiagRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Diagnostic Table Objects."
|
|
::= { prvtRsvpGroups 3 }
|
|
|
|
prvtRsvpDiagNodeGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
prvtRsvpDiagNodeType,
|
|
prvtRsvpDiagNodeDreqArrivalTime,
|
|
prvtRsvpDiagNodeIncomingIfAddr,
|
|
prvtRsvpDiagNodeOutgoingIfAddr,
|
|
prvtRsvpDiagNodePrevHopAddr,
|
|
prvtRsvpDiagNodeDTTL,
|
|
prvtRsvpDiagNodeMFlag,
|
|
prvtRsvpDiagNodeRErr,
|
|
prvtRsvpDiagNodeKValue,
|
|
prvtRsvpDiagNodeTimerValue,
|
|
prvtRsvpDiagRsvpHopAddr,
|
|
prvtRsvpDiagRsvpHopLIH,
|
|
prvtRsvpDiagSenderTpltLSPId,
|
|
prvtRsvpDiagSenderTpltAddress,
|
|
prvtRsvpDiagFlowSpecCLBktRate,
|
|
prvtRsvpDiagFlowSpecCLBktDep,
|
|
prvtRsvpDiagFlowSpecCLPkDataRate,
|
|
prvtRsvpDiagFlowSpecCLMinPolUnit,
|
|
prvtRsvpDiagFlowSpecCLMaxPktSize,
|
|
prvtRsvpDiagFlowSpecGQBktRate,
|
|
prvtRsvpDiagFlowSpecGQBktDep,
|
|
prvtRsvpDiagFlowSpecGQPkDataRate,
|
|
prvtRsvpDiagFlowSpecGQMinPolUnit,
|
|
prvtRsvpDiagFlowSpecGQMaxPktSize,
|
|
prvtRsvpDiagFlowSpecGQRate,
|
|
prvtRsvpDiagFlowSpecGQSlack,
|
|
prvtRsvpDiagFlowSpecCoSCoS,
|
|
prvtRsvpDiagFlowSpecCoSMTU,
|
|
prvtRsvpDiagFilterSpecAddress,
|
|
prvtRsvpDiagFilterSpecLSPId,
|
|
prvtRsvpDiagConfirmRcvAddr,
|
|
prvtRsvpDiagStyle
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Diag Node Table Objects."
|
|
::= { prvtRsvpGroups 4 }
|
|
|
|
END
|
|
|