mibs/MIBS/transition/TN-DHCP-MIB
2023-12-05 12:25:34 +01:00

677 lines
21 KiB
Plaintext

-- *****************************************************************
-- TN-DHCP-MIB
--
-- Copyright (c) 2012, Transition Networks Inc.
-- All rights reserved.
-- *****************************************************************
--
TN-DHCP-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
NOTIFICATION-TYPE,
Integer32 FROM SNMPv2-SMI
NOTIFICATION-GROUP FROM SNMPv2-CONF
TEXTUAL-CONVENTION, TimeStamp,
RowStatus, TruthValue FROM SNMPv2-TC
InetAddressType, InetAddress FROM INET-ADDRESS-MIB
entPhysicalIndex FROM ENTITY-MIB
tnProducts FROM TRANSITION-SMI
ifIndex, InterfaceIndex FROM IF-MIB;
tnDhcpMIB MODULE-IDENTITY
LAST-UPDATED "201210080000Z"
ORGANIZATION "Transition Networks, Inc."
CONTACT-INFO
"Transition Networks
Technical Support
10900 Red Circle Drive
Minnetonka, MN 55343 USA
Tel: +1-800-526-9267
E-mail: techsupport@transition.com"
DESCRIPTION
"The mib module for DHCP settings."
REVISION "201210080000Z"
DESCRIPTION
"Initial Revision of this module"
::= { tnProducts 33 }
tnDhcpMIBObjects
OBJECT IDENTIFIER ::= { tnDhcpMIB 1 }
tnDhcpMIBNotifications
OBJECT IDENTIFIER ::= { tnDhcpMIB 2 }
--
-- Textual Conventions
--
--
-- MIB variables
--
tnDhcpSnoopingMgmt
OBJECT IDENTIFIER ::= { tnDhcpMIBObjects 1 }
tnDhcpSnoopingTable OBJECT-TYPE
SYNTAX SEQUENCE OF TnDhcpSnoopingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is for user to configure the global settings of DHCP Snooping."
::= { tnDhcpSnoopingMgmt 1 }
tnDhcpSnoopingEntry OBJECT-TYPE
SYNTAX TnDhcpSnoopingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry represents a global configuration of DHCP Snooping."
INDEX { entPhysicalIndex }
::= { tnDhcpSnoopingTable 1 }
TnDhcpSnoopingEntry ::= SEQUENCE {
tnDhcpSnoopingMode TruthValue
}
tnDhcpSnoopingMode OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the DHCP snooping mode operation. Possible modes are:
True: Enable DHCP snooping mode operation.
When DHCP snooping mode operation is enabled, the DHCP request messages
will be forwarded to trusted ports and only allow reply packets from
trusted ports.
False: Disable DHCP snooping mode operation. "
DEFVAL { false }
::= { tnDhcpSnoopingEntry 1 }
--
-- tnDhcpSnoopingIfTable
--
tnDhcpSnoopingIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF TnDhcpSnoopingIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table lets user to configure the DHCP Snooping for each port."
::= { tnDhcpSnoopingMgmt 2 }
tnDhcpSnoopingIfEntry OBJECT-TYPE
SYNTAX TnDhcpSnoopingIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry represents a DHCP Snooping setting on a port."
INDEX { ifIndex }
::= { tnDhcpSnoopingIfTable 1 }
TnDhcpSnoopingIfEntry ::= SEQUENCE {
tnDhcpSnoopingIfMode INTEGER
}
tnDhcpSnoopingIfMode OBJECT-TYPE
SYNTAX INTEGER
{
trusted (1), -- Configures the port as trusted source of the DHCP messages.
untrusted (2), -- Configures the port as untrusted source of the DHCP messages.
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure the DHCP Snooping port mode."
DEFVAL { untrusted }
::= { tnDhcpSnoopingIfEntry 1 }
--
-- tnDhcpSnoopingStatisticsTable
--
tnDhcpSnoopingStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF TnDhcpSnoopingStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides statistics for DHCP Snooping on ports"
::= { tnDhcpSnoopingMgmt 3 }
tnDhcpSnoopingStatisticsEntry OBJECT-TYPE
SYNTAX TnDhcpSnoopingStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry represents a DHCP Snooping statistics on a port."
INDEX { ifIndex }
::= { tnDhcpSnoopingStatisticsTable 1 }
TnDhcpSnoopingStatisticsEntry ::= SEQUENCE {
tnDhcpSnoopingStatisticsClear TruthValue,
tnDhcpSnoopingStatisticsRxDiscover INTEGER,
tnDhcpSnoopingStatisticsTxDiscover INTEGER,
tnDhcpSnoopingStatisticsRxOffer INTEGER,
tnDhcpSnoopingStatisticsTxOffer INTEGER,
tnDhcpSnoopingStatisticsRxRequest INTEGER,
tnDhcpSnoopingStatisticsTxRequest INTEGER,
tnDhcpSnoopingStatisticsRxDecline INTEGER,
tnDhcpSnoopingStatisticsTxDecline INTEGER,
tnDhcpSnoopingStatisticsRxACK INTEGER,
tnDhcpSnoopingStatisticsTxACK INTEGER,
tnDhcpSnoopingStatisticsRxNAK INTEGER,
tnDhcpSnoopingStatisticsTxNAK INTEGER,
tnDhcpSnoopingStatisticsRxRelease INTEGER,
tnDhcpSnoopingStatisticsTxRelease INTEGER,
tnDhcpSnoopingStatisticsRxInform INTEGER,
tnDhcpSnoopingStatisticsTxInform INTEGER,
tnDhcpSnoopingStatisticsRxLeaseQuery INTEGER,
tnDhcpSnoopingStatisticsTxLeaseQuery INTEGER,
tnDhcpSnoopingStatisticsRxLeaseUnassigned INTEGER,
tnDhcpSnoopingStatisticsTxLeaseUnassigned INTEGER,
tnDhcpSnoopingStatisticsRxLeaseUnknown INTEGER,
tnDhcpSnoopingStatisticsTxLeaseUnknown INTEGER,
tnDhcpSnoopingStatisticsRxLeaseActive INTEGER,
tnDhcpSnoopingStatisticsTxLeaseActive INTEGER
}
tnDhcpSnoopingStatisticsClear OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Clear the counters for the selected port."
DEFVAL { false }
::= { tnDhcpSnoopingStatisticsEntry 1 }
tnDhcpSnoopingStatisticsRxDiscover OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of discover packets received on the port."
::= { tnDhcpSnoopingStatisticsEntry 2 }
tnDhcpSnoopingStatisticsTxDiscover OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of discover packets transmitted on the port."
::= { tnDhcpSnoopingStatisticsEntry 3 }
tnDhcpSnoopingStatisticsRxOffer OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of offer packets received on the port."
::= { tnDhcpSnoopingStatisticsEntry 4 }
tnDhcpSnoopingStatisticsTxOffer OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of offer packets transmitted on the port."
::= { tnDhcpSnoopingStatisticsEntry 5 }
tnDhcpSnoopingStatisticsRxRequest OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of request packets received on the port."
::= { tnDhcpSnoopingStatisticsEntry 6 }
tnDhcpSnoopingStatisticsTxRequest OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of request packets transmitted on the port."
::= { tnDhcpSnoopingStatisticsEntry 7 }
tnDhcpSnoopingStatisticsRxDecline OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of decline packets received on the port."
::= { tnDhcpSnoopingStatisticsEntry 8 }
tnDhcpSnoopingStatisticsTxDecline OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of decline packets transmitted on the port."
::= { tnDhcpSnoopingStatisticsEntry 9 }
tnDhcpSnoopingStatisticsRxACK OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ACK packets received on the port."
::= { tnDhcpSnoopingStatisticsEntry 10 }
tnDhcpSnoopingStatisticsTxACK OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ACK packets transmitted on the port."
::= { tnDhcpSnoopingStatisticsEntry 11 }
tnDhcpSnoopingStatisticsRxNAK OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of NAK packets received on the port."
::= { tnDhcpSnoopingStatisticsEntry 12 }
tnDhcpSnoopingStatisticsTxNAK OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of NAK packets transmitted on the port."
::= { tnDhcpSnoopingStatisticsEntry 13 }
tnDhcpSnoopingStatisticsRxRelease OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of release packets received. "
::= { tnDhcpSnoopingStatisticsEntry 14 }
tnDhcpSnoopingStatisticsTxRelease OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of release packets transmitted."
::= { tnDhcpSnoopingStatisticsEntry 15 }
tnDhcpSnoopingStatisticsRxInform OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of inform packets received on the port."
::= { tnDhcpSnoopingStatisticsEntry 16 }
tnDhcpSnoopingStatisticsTxInform OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of inform packets transmitted on the port."
::= { tnDhcpSnoopingStatisticsEntry 17 }
tnDhcpSnoopingStatisticsRxLeaseQuery OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of lease query packets received on the port."
::= { tnDhcpSnoopingStatisticsEntry 18 }
tnDhcpSnoopingStatisticsTxLeaseQuery OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of lease query packets transmitted on the port."
::= { tnDhcpSnoopingStatisticsEntry 19 }
tnDhcpSnoopingStatisticsRxLeaseUnassigned OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of lease unassigned packets received on the port."
::= { tnDhcpSnoopingStatisticsEntry 20 }
tnDhcpSnoopingStatisticsTxLeaseUnassigned OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of lease unassigned packets transmitted on the port."
::= { tnDhcpSnoopingStatisticsEntry 21 }
tnDhcpSnoopingStatisticsRxLeaseUnknown OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of lease unknown packets received on the port."
::= { tnDhcpSnoopingStatisticsEntry 22 }
tnDhcpSnoopingStatisticsTxLeaseUnknown OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of lease unknown packets transmitted on the port."
::= { tnDhcpSnoopingStatisticsEntry 23 }
tnDhcpSnoopingStatisticsRxLeaseActive OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of lease active packets received on the port."
::= { tnDhcpSnoopingStatisticsEntry 24 }
tnDhcpSnoopingStatisticsTxLeaseActive OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of lease active packets transmitted on the port."
::= { tnDhcpSnoopingStatisticsEntry 25 }
--
-- MIB variables
--
tnDhcpRelayMgmt
OBJECT IDENTIFIER ::= { tnDhcpMIBObjects 2 }
tnDhcpRelayTable OBJECT-TYPE
SYNTAX SEQUENCE OF TnDhcpRelayEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is for user to configure the DHCP Relay."
::= { tnDhcpRelayMgmt 1 }
tnDhcpRelayEntry OBJECT-TYPE
SYNTAX TnDhcpRelayEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry represents a global configuration of DHCP Relay."
INDEX { entPhysicalIndex }
::= { tnDhcpRelayTable 1 }
TnDhcpRelayEntry ::= SEQUENCE {
tnDhcpRelayMode TruthValue,
tnDhcpRelayServerAddrType InetAddressType,
tnDhcpRelayServerAddr InetAddress,
tnDhcpRelayInfoMode TruthValue,
tnDhcpRelayInfoPolicy INTEGER
}
tnDhcpRelayMode OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the DHCP relay mode operation. Possible modes are:
True: Enable DHCP relay mode operation. When DHCP relay mode operation
is enabled, the agent forwards and transfers DHCP messages between the
clients and the server when they are not in the same subnet domain.
And the DHCP broadcast message won't be flooded for security considerations.
False: Disable DHCP relay mode operation."
DEFVAL { false }
::= { tnDhcpRelayEntry 1 }
tnDhcpRelayServerAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of the DHCP Relay server address."
::= { tnDhcpRelayEntry 2 }
tnDhcpRelayServerAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the DHCP relay server IP address.
A DHCP relay agent is used to forward and to transfer DHCP messages
between the clients and the server when they are not in the same subnet
domain."
::= { tnDhcpRelayEntry 3 }
tnDhcpRelayInfoMode OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the DHCP relay information mode option operation.
Possible modes are:
True: Enable DHCP relay information mode operation. When DHCP relay
information mode operation is enabled, the agent inserts specific information
into a DHCP message when forwarding to DHCP server and removes it from
a DHCP message when transferring to DHCP client. It only works when DHCP
relay operation mode is enabled.
False: Disable DHCP relay information mode operation."
DEFVAL { false }
::= { tnDhcpRelayEntry 4 }
tnDhcpRelayInfoPolicy OBJECT-TYPE
SYNTAX INTEGER
{
replace (0), -- Replace the original relay information when a DHCP
-- message that already contains it is received.
keep (1), -- Keep the original relay information when a DHCP
-- message that already contains it is received.
drop (2), -- Drop the package when a DHCP message that already
-- contains relay information is received.
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the DHCP relay information option policy.
When DHCP relay information mode operation is enabled, if agent receives
a DHCP message that already contains relay agent information, it will
enforce the policy.
The 'Replace' option is invalid when relay information mode is disabled.
Possible policies are: replace, keep and drop."
DEFVAL { replace }
::= { tnDhcpRelayEntry 5 }
--
-- tnDhcpRelayStatisticsTable
--
tnDhcpRelayStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF TnDhcpRelayStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides statistics for DHCP Relay."
::= { tnDhcpRelayMgmt 2 }
tnDhcpRelayStatisticsEntry OBJECT-TYPE
SYNTAX TnDhcpRelayStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry represents a DHCP Relay statistics."
INDEX { entPhysicalIndex }
::= { tnDhcpRelayStatisticsTable 1 }
TnDhcpRelayStatisticsEntry ::= SEQUENCE {
tnDhcpRelayStatisticsClear INTEGER,
tnDhcpRelayStatisticsServerTransmitToServer INTEGER,
tnDhcpRelayStatisticsServerTransmitError INTEGER,
tnDhcpRelayStatisticsServerReceiveFromServer INTEGER,
tnDhcpRelayStatisticsServerReceiveMissingAgentOption INTEGER,
tnDhcpRelayStatisticsServerReceiveMissingCircuitID INTEGER,
tnDhcpRelayStatisticsServerReceiveMissingRemoteID INTEGER,
tnDhcpRelayStatisticsServerReceiveBadCircuitID INTEGER,
tnDhcpRelayStatisticsServerReceiveBadRemoteID INTEGER,
tnDhcpRelayStatisticsClientTransmitToClient INTEGER,
tnDhcpRelayStatisticsClientTransmitError INTEGER,
tnDhcpRelayStatisticsClientReceiveFromClient INTEGER,
tnDhcpRelayStatisticsClientReceiveAgentOption INTEGER,
tnDhcpRelayStatisticsClientReplaceAgentOption INTEGER,
tnDhcpRelayStatisticsClientKeepAgentOption INTEGER,
tnDhcpRelayStatisticsClientDropAgentOption INTEGER
}
tnDhcpRelayStatisticsClear OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Clear the counters of the entry."
DEFVAL { false }
::= { tnDhcpRelayStatisticsEntry 1 }
tnDhcpRelayStatisticsServerTransmitToServer OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets that are relayed from client to server."
::= { tnDhcpRelayStatisticsEntry 2 }
tnDhcpRelayStatisticsServerTransmitError OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets that resulted in errors while being sent to clients."
::= { tnDhcpRelayStatisticsEntry 3 }
tnDhcpRelayStatisticsServerReceiveFromServer OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets received from server."
::= { tnDhcpRelayStatisticsEntry 4 }
tnDhcpRelayStatisticsServerReceiveMissingAgentOption OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets received without agent information options."
::= { tnDhcpRelayStatisticsEntry 5 }
tnDhcpRelayStatisticsServerReceiveMissingCircuitID OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets received with the Circuit ID option missing."
::= { tnDhcpRelayStatisticsEntry 6 }
tnDhcpRelayStatisticsServerReceiveMissingRemoteID OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets received with the Remote ID option missing."
::= { tnDhcpRelayStatisticsEntry 7 }
tnDhcpRelayStatisticsServerReceiveBadCircuitID OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets whose Circuit ID option did not match known
circuit ID. "
::= { tnDhcpRelayStatisticsEntry 8 }
tnDhcpRelayStatisticsServerReceiveBadRemoteID OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets whose Remote ID option did not match known Remote ID."
::= { tnDhcpRelayStatisticsEntry 9 }
tnDhcpRelayStatisticsClientTransmitToClient OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of relayed packets from server to client. "
::= { tnDhcpRelayStatisticsEntry 10 }
tnDhcpRelayStatisticsClientTransmitError OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets that resulted in error while being sent to servers."
::= { tnDhcpRelayStatisticsEntry 11 }
tnDhcpRelayStatisticsClientReceiveFromClient OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received packets from server. "
::= { tnDhcpRelayStatisticsEntry 12 }
tnDhcpRelayStatisticsClientReceiveAgentOption OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received packets with relay agent information option. "
::= { tnDhcpRelayStatisticsEntry 13 }
tnDhcpRelayStatisticsClientReplaceAgentOption OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets which were replaced with relay agent information
option."
::= { tnDhcpRelayStatisticsEntry 14 }
tnDhcpRelayStatisticsClientKeepAgentOption OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets whose relay agent information was retained. "
::= { tnDhcpRelayStatisticsEntry 15 }
tnDhcpRelayStatisticsClientDropAgentOption OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets that were dropped which were received with relay
agent information. "
::= { tnDhcpRelayStatisticsEntry 16 }
--
-- Notifications
--
END