2296 lines
65 KiB
Plaintext
2296 lines
65 KiB
Plaintext
TN-SA-MIB DEFINITIONS ::= BEGIN
|
||
|
||
IMPORTS
|
||
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, enterprises, IpAddress, Counter32, Unsigned32, Counter64
|
||
FROM SNMPv2-SMI
|
||
TEXTUAL-CONVENTION, RowStatus, DisplayString, TruthValue, MacAddress
|
||
FROM SNMPv2-TC
|
||
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
|
||
FROM SNMPv2-CONF
|
||
entPhysicalIndex FROM ENTITY-MIB
|
||
InetAddressType, InetAddress
|
||
FROM INET-ADDRESS-MIB;
|
||
|
||
tnSaMIB MODULE-IDENTITY
|
||
LAST-UPDATED "201310180000Z" -- October 18, 2013
|
||
ORGANIZATION "Transition Networks"
|
||
CONTACT-INFO
|
||
"Copyright (C) 2013 Transition Networks, Inc. All Rights Reserved."
|
||
DESCRIPTION
|
||
"A MIB module provides Service Activation management interface."
|
||
::= { iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) transition (868) products (2) tnProducts(5) tnEtherSATMIB(108) 2 }
|
||
|
||
--
|
||
-- Textual conventions
|
||
--
|
||
|
||
TnSAEnabledState ::= TEXTUAL-CONVENTION
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Enabled state."
|
||
SYNTAX INTEGER {
|
||
disabled (0), -- Disabled state
|
||
enabled (1) -- Enabled state
|
||
}
|
||
|
||
TnSATestDirection ::= TEXTUAL-CONVENTION
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Test Direction."
|
||
SYNTAX INTEGER {
|
||
ne-to-fe (0), -- Near End to Far End
|
||
fe-to-ne (1), -- Far End to Near End
|
||
loopback (2) -- Loopback
|
||
}
|
||
|
||
TnSADirectionality ::= TEXTUAL-CONVENTION
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Directionality of the test."
|
||
SYNTAX INTEGER {
|
||
unidirection (0), -- uni-direction
|
||
bidirection (1), -- bi-direction
|
||
loopback (2)
|
||
}
|
||
|
||
TnSAFrameLevel ::= TEXTUAL-CONVENTION
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Frame level."
|
||
SYNTAX INTEGER {
|
||
levelL2 (1),
|
||
levelL3 (2)
|
||
}
|
||
|
||
TnSAPaylodFiller ::= TEXTUAL-CONVENTION
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Payload filler."
|
||
SYNTAX INTEGER {
|
||
prbs (0),
|
||
fixed (2)
|
||
}
|
||
|
||
TnSAL2Encaps ::= TEXTUAL-CONVENTION
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Encapsulation type for L2 frames."
|
||
SYNTAX INTEGER {
|
||
none (0),
|
||
eth-tst (1), -- ETH-TST frames
|
||
eth-tst-ethtype (2), -- ETH-TST frames with custom Eth-Type
|
||
llc-snap (3) -- LLC/SNAP frames
|
||
}
|
||
|
||
TnSAL3Encaps ::= TEXTUAL-CONVENTION
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Encapsulation type for L3 frames."
|
||
SYNTAX INTEGER {
|
||
none (0),
|
||
udp (1), -- UDP/IP
|
||
tcp (2) -- TCP/IP
|
||
}
|
||
|
||
TnSATestStatus ::= TEXTUAL-CONVENTION
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Overall test status."
|
||
SYNTAX INTEGER {
|
||
status-none (1),
|
||
completed (2),
|
||
in-progress (3),
|
||
not-supported (4),
|
||
unable-to-run (5),
|
||
aborted (6),
|
||
failed (7),
|
||
unknown (8)
|
||
}
|
||
|
||
TnSATestAction ::= TEXTUAL-CONVENTION
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Test action."
|
||
SYNTAX INTEGER {
|
||
start (1), -- Start test
|
||
stop (2) -- Stop test
|
||
}
|
||
|
||
TnSATestResStatus ::= TEXTUAL-CONVENTION
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Test result. fail NE <20> if near end to far end direction has failed.
|
||
fail FE <20> if far end to near end direction has failed (For bidirectional mode only).
|
||
fail NE & FE <20> if both directions have failed (For bidirectional mode only)."
|
||
SYNTAX INTEGER {
|
||
fail-ne (1), -- Fail Near End
|
||
fail-fe (2), -- Fail Far End
|
||
fail-ne-fe (3),
|
||
pass (4),
|
||
not-tested (5),
|
||
fail-exec (6)
|
||
}
|
||
|
||
TnSATestStepResult ::= TEXTUAL-CONVENTION
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Test step result."
|
||
SYNTAX INTEGER {
|
||
fail (0),
|
||
pass (1)
|
||
}
|
||
|
||
TnSATestEncapsulationType ::= TEXTUAL-CONVENTION
|
||
STATUS current
|
||
DESCRIPTION
|
||
"VLAN Tag encapsulation type."
|
||
SYNTAX INTEGER {
|
||
utag (0),
|
||
ctag (1),
|
||
stag (2),
|
||
cctag (3),
|
||
sctag (4)
|
||
}
|
||
|
||
tnSAProfileNextID OBJECT-TYPE
|
||
SYNTAX Unsigned32
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This object contains the next profile ID to use
|
||
when creating entries in the tnSAProfileTable.
|
||
|
||
When creating a new conceptual row (configuration
|
||
entry) in tnSAProfileTable with an SNMP SET operation the
|
||
command generator (Network Management Application) must
|
||
first issue a management protocol retrieval operation
|
||
to obtain the current value of this object.
|
||
|
||
If the command responder (agent) does not wish to allow
|
||
creation of more entries in tnSAProfileTable, possibly
|
||
because of resource exhaustion, this object MUST return
|
||
a value of 0.
|
||
|
||
If a non-zero value is returned the Network Management
|
||
Application must determine whether the value is indeed
|
||
still unused since two Network Management Applications
|
||
may attempt to create a row simultaneously and use the
|
||
same value.
|
||
|
||
If it is currently unused and the SET succeeds, the
|
||
agent MUST change the value of this object to a
|
||
currently unused non-zero value (according to an
|
||
implementation specific algorithm) or zero (if no
|
||
further row creation will be permitted).
|
||
|
||
If the value is in use, however, the SET fails and the
|
||
Network Management Application must then reread this
|
||
object to obtain a new usable value."
|
||
::= { tnSaMIB 1 }
|
||
|
||
tnSATestNextID OBJECT-TYPE
|
||
SYNTAX Unsigned32
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This object contains the next Test ID to use
|
||
when creating entries in the tnSATestTable.
|
||
|
||
When creating a new conceptual row (configuration
|
||
entry) in tnSATestTable with an SNMP SET operation the
|
||
command generator (Network Management Application) must
|
||
first issue a management protocol retrieval operation
|
||
to obtain the current value of this object.
|
||
|
||
If the command responder (agent) does not wish to allow
|
||
creation of more entries in tnSATestTable, possibly
|
||
because of resource exhaustion, this object MUST return
|
||
a value of 0.
|
||
|
||
If a non-zero value is returned the Network Management
|
||
Application must determine whether the value is indeed
|
||
still unused since two Network Management Applications
|
||
may attempt to create a row simultaneously and use the
|
||
same value.
|
||
|
||
If it is currently unused and the SET succeeds, the
|
||
agent MUST change the value of this object to a
|
||
currently unused non-zero value (according to an
|
||
implementation specific algorithm) or zero (if no
|
||
further row creation will be permitted).
|
||
|
||
If the value is in use, however, the SET fails and the
|
||
Network Management Application must then reread this
|
||
object to obtain a new usable value."
|
||
::= { tnSaMIB 2 }
|
||
|
||
tnSASysConfPeerCommunicationProto OBJECT-TYPE
|
||
SYNTAX TnSAEnabledState
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Enable/disable the peer communication protocol. If this attribute is disabled a NID is unable to support
|
||
unidirectional and bidirectional RFC2544 tests (both as Initiator and Collector) since it cannot communicate
|
||
with the far end. Only loopback tests can be executed in this case."
|
||
::= { tnSaMIB 3 }
|
||
|
||
tnSASysConfCollectorState OBJECT-TYPE
|
||
SYNTAX TnSAEnabledState
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Collector state. The Collector Flag determines will the SA module accept SA test requests from outside."
|
||
::= { tnSaMIB 4 }
|
||
|
||
tnSASysTestMacAddress OBJECT-TYPE
|
||
SYNTAX MacAddress
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Test MAC address. The Test MAC Address is used as source MAC address of the generating frames."
|
||
::= { tnSaMIB 5 }
|
||
|
||
tnSAPtpClockNum OBJECT-TYPE
|
||
SYNTAX INTEGER(0..3)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
""
|
||
::= { tnSaMIB 6 }
|
||
|
||
--
|
||
-- SA Profile
|
||
--
|
||
tnSAProfileTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF TnSAProfileEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The Service Activation Profile Table. Entries in this table
|
||
represent SA profiles.
|
||
|
||
The index structure is the profile ID."
|
||
::= { tnSaMIB 7 }
|
||
|
||
tnSAProfileEntry OBJECT-TYPE
|
||
SYNTAX TnSAProfileEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"An entry in the tnSAProfileTable."
|
||
INDEX {
|
||
tnSAProfileID
|
||
}
|
||
::= { tnSAProfileTable 1 }
|
||
|
||
TnSAProfileEntry ::= SEQUENCE {
|
||
tnSAProfileID Unsigned32,
|
||
tnSAProfileName DisplayString,
|
||
tnSAProfileFrameLossRatio Unsigned32,
|
||
tnSAProfileCbsLineRate Unsigned32,
|
||
tnSAProfileYellowPcpList Unsigned32,
|
||
tnSAProfileFrameSizeMix OCTET STRING,
|
||
tnSAProfileRateDecStep Unsigned32,
|
||
tnSAProfileRateStepLength Unsigned32,
|
||
tnSAProfileDirectionality TnSADirectionality,
|
||
tnSAProfileStepsToExecute Unsigned32,
|
||
tnSAProfileRefCounter Unsigned32,
|
||
tnSAProfileRowStatus RowStatus
|
||
}
|
||
|
||
tnSAProfileID OBJECT-TYPE
|
||
SYNTAX Unsigned32 (1..65535)
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The profile entry ID."
|
||
::= { tnSAProfileEntry 1 }
|
||
|
||
tnSAProfileName OBJECT-TYPE
|
||
SYNTAX DisplayString
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The name of the profile."
|
||
::= { tnSAProfileEntry 2 }
|
||
|
||
tnSAProfileFrameLossRatio OBJECT-TYPE
|
||
SYNTAX Unsigned32 (0..10000)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Acceptable frame loss ratio (expressed in percentage,
|
||
with 2 decimals (i.e. 99.99 %)."
|
||
::= { tnSAProfileEntry 3 }
|
||
|
||
tnSAProfileCbsLineRate OBJECT-TYPE
|
||
SYNTAX Unsigned32
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Line rate at which burst traffic should be sent for the Back-to-back frames test. In Mbps."
|
||
::= { tnSAProfileEntry 4 }
|
||
|
||
tnSAProfileFrameSizeMix OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(1..20))
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Traffic frame size mix, for throughput tests."
|
||
::= { tnSAProfileEntry 5 }
|
||
|
||
tnSAProfileRateDecStep OBJECT-TYPE
|
||
SYNTAX Unsigned32 (0..100)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Rate decrease step size, in percentage. Default 25%."
|
||
DEFVAL { 25 }
|
||
::= { tnSAProfileEntry 6 }
|
||
|
||
tnSAProfileRateStepLength OBJECT-TYPE
|
||
SYNTAX Unsigned32 (10..60)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Rate step length, in seconds."
|
||
DEFVAL { 20 }
|
||
::= { tnSAProfileEntry 7 }
|
||
|
||
tnSAProfileDirectionality OBJECT-TYPE
|
||
SYNTAX TnSADirectionality
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Directionality of the tests: uni-directional, bi-directional or loopback based."
|
||
::= { tnSAProfileEntry 8 }
|
||
|
||
tnSAProfileYellowPcpList OBJECT-TYPE
|
||
SYNTAX Unsigned32 (0.. 255)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"List of PCP values corresponding to yellow frame. Bitmask. Each bit number [0..7] corresponds to a PCP value [0..7].
|
||
Bit 0 corresponds to PCP 0, etc.
|
||
|
||
Example: yellow PCP list: 0,3,5. So, bits 0, 3 and 5 must be set to 1, while
|
||
other bits must be reset to zero: 101001 in binary format = 41 in decimal format.
|
||
So, the tnSAProfileYellowPcpList must be set to 41."
|
||
::= { tnSAProfileEntry 9 }
|
||
|
||
tnSAProfileStepsToExecute OBJECT-TYPE
|
||
SYNTAX Unsigned32 (0.. 2047)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"List of tests to execute <20> bitmask:
|
||
-Throughput (bit 1)
|
||
-Latency (bit 2)
|
||
-Frame Loss Rate (bit 3)
|
||
-Back To Back Frames (bit 4)"
|
||
::= { tnSAProfileEntry 10 }
|
||
|
||
tnSAProfileRefCounter OBJECT-TYPE
|
||
SYNTAX Unsigned32
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Readonly field contains number of tests that use this profile. Profile can be deleted if it has no assigned tests."
|
||
::= { tnSAProfileEntry 11 }
|
||
|
||
tnSAProfileRowStatus OBJECT-TYPE
|
||
SYNTAX RowStatus
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The row status. To create a row, set the instance of
|
||
this variable for the new row to 'createAndGo'. To
|
||
delete a row, set the instance of this variable for
|
||
the row to delete to 'destroy'."
|
||
::= { tnSAProfileEntry 12 }
|
||
|
||
--
|
||
-- Frame format table for SA profile
|
||
--
|
||
tnSAFrameFormatProfileTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF TnSAFrameFormatProfileEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The SA Profile Frame Format Table. Entries in this table represent
|
||
Frame Format attributes. Each row in the table conceptually
|
||
augments the entries in the tnSAProfileTable.
|
||
|
||
The index structure is the SA profile ID."
|
||
::= { tnSaMIB 8 }
|
||
|
||
tnSAFrameFormatProfileEntry OBJECT-TYPE
|
||
SYNTAX TnSAFrameFormatProfileEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"An entry in the tnSAFrameFormatProfileTable."
|
||
INDEX {
|
||
tnSAProfileID
|
||
}
|
||
::= { tnSAFrameFormatProfileTable 1 }
|
||
|
||
TnSAFrameFormatProfileEntry ::= SEQUENCE {
|
||
tnSAFrameFormatProfileFrameLevel TnSAFrameLevel,
|
||
tnSAFrameFormatProfilePaylodFiller TnSAPaylodFiller,
|
||
tnSAFrameFormatProfileEncapsulationL2 TnSAL2Encaps,
|
||
tnSAFrameFormatProfileEncapsulationL3 TnSAL3Encaps,
|
||
tnSAFrameFormatProfileEthType Unsigned32,
|
||
tnSAFrameFormatProfileIpDscp Unsigned32,
|
||
tnSAFrameFormatProfileIpEcn Unsigned32,
|
||
tnSAFrameFormatProfileIpFlags Unsigned32,
|
||
tnSAFrameFormatProfileIpTtl Unsigned32,
|
||
tnSAFrameFormatProfileUdpSrcPort Unsigned32,
|
||
tnSAFrameFormatProfileUdpDstPort Unsigned32,
|
||
tnSAFrameFormatProfileTcpSrcPort Unsigned32,
|
||
tnSAFrameFormatProfileTcpDstPort Unsigned32,
|
||
tnSAFrameFormatProfileTcpSeqNum Unsigned32,
|
||
tnSAFrameFormatProfileTcpAckNum Unsigned32,
|
||
tnSAFrameFormatProfileTcpControlBits Unsigned32,
|
||
tnSAFrameFormatProfileTcpWindowSize Unsigned32,
|
||
tnSAFrameFormatProfileLlcSnapOui Unsigned32,
|
||
tnSAFrameFormatProfileLlcSnapProto Unsigned32,
|
||
tnSAFrameFormatProfileIpDestIpAddress IpAddress,
|
||
tnSAFrameFormatProfileIpSrcIpAddress IpAddress,
|
||
tnSAFrameFormatProfilePayloadFillPattern Unsigned32,
|
||
tnSAFrameFormatProfileMEGLevel Unsigned32
|
||
}
|
||
|
||
tnSAFrameFormatProfileFrameLevel OBJECT-TYPE
|
||
SYNTAX TnSAFrameLevel
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Frame level <20> L2 or L3."
|
||
::= { tnSAFrameFormatProfileEntry 1 }
|
||
|
||
tnSAFrameFormatProfilePaylodFiller OBJECT-TYPE
|
||
SYNTAX TnSAPaylodFiller
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Paylod filler."
|
||
::= { tnSAFrameFormatProfileEntry 2 }
|
||
|
||
tnSAFrameFormatProfileEncapsulationL2 OBJECT-TYPE
|
||
SYNTAX TnSAL2Encaps
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Encapsulation type for L2 frames."
|
||
::= { tnSAFrameFormatProfileEntry 3 }
|
||
|
||
tnSAFrameFormatProfileEncapsulationL3 OBJECT-TYPE
|
||
SYNTAX TnSAL3Encaps
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Encapsulation type for L3 frames."
|
||
::= { tnSAFrameFormatProfileEntry 4 }
|
||
|
||
tnSAFrameFormatProfileEthType OBJECT-TYPE
|
||
SYNTAX Unsigned32 (0..65535)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Custom Eth-Type for L2 ETH-TST frames."
|
||
::= { tnSAFrameFormatProfileEntry 5 }
|
||
|
||
tnSAFrameFormatProfileIpDscp OBJECT-TYPE
|
||
SYNTAX Unsigned32 (0..63)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"DSCP value for L3 IP frames."
|
||
DEFVAL { 0 }
|
||
::= { tnSAFrameFormatProfileEntry 6 }
|
||
|
||
tnSAFrameFormatProfileIpEcn OBJECT-TYPE
|
||
SYNTAX Unsigned32 (0..3)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ECN value for L3 IP frames."
|
||
DEFVAL { 0 }
|
||
::= { tnSAFrameFormatProfileEntry 7 }
|
||
|
||
tnSAFrameFormatProfileIpFlags OBJECT-TYPE
|
||
SYNTAX Unsigned32 (0..7)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Flags value for L3 IP frames."
|
||
DEFVAL { 0 }
|
||
::= { tnSAFrameFormatProfileEntry 8 }
|
||
|
||
tnSAFrameFormatProfileIpTtl OBJECT-TYPE
|
||
SYNTAX Unsigned32 (0..255)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"TTL value for L3 IP frames."
|
||
DEFVAL { 64 }
|
||
::= { tnSAFrameFormatProfileEntry 9 }
|
||
|
||
tnSAFrameFormatProfileUdpSrcPort OBJECT-TYPE
|
||
SYNTAX Unsigned32 (0..65535)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Source port for L3 IP/UDP frames."
|
||
DEFVAL { 0 }
|
||
::= { tnSAFrameFormatProfileEntry 10 }
|
||
|
||
tnSAFrameFormatProfileUdpDstPort OBJECT-TYPE
|
||
SYNTAX Unsigned32 (0..65535)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Destination port for L3 IP/UDP frames."
|
||
DEFVAL { 0 }
|
||
::= { tnSAFrameFormatProfileEntry 11 }
|
||
|
||
tnSAFrameFormatProfileTcpSrcPort OBJECT-TYPE
|
||
SYNTAX Unsigned32 (0..65535)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Source port for L3 IP/TCP frames."
|
||
DEFVAL { 0 }
|
||
::= { tnSAFrameFormatProfileEntry 12 }
|
||
|
||
tnSAFrameFormatProfileTcpDstPort OBJECT-TYPE
|
||
SYNTAX Unsigned32 (0..65535)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Destination port for L3 IP/TCP frames."
|
||
DEFVAL { 0 }
|
||
::= { tnSAFrameFormatProfileEntry 13 }
|
||
|
||
tnSAFrameFormatProfileTcpSeqNum OBJECT-TYPE
|
||
SYNTAX Unsigned32
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Sequence number for L3 IP/TCP frames."
|
||
DEFVAL { 16 }
|
||
::= { tnSAFrameFormatProfileEntry 14 }
|
||
|
||
tnSAFrameFormatProfileTcpAckNum OBJECT-TYPE
|
||
SYNTAX Unsigned32
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ACK number for L3 IP/TCP frames."
|
||
DEFVAL { 16 }
|
||
::= { tnSAFrameFormatProfileEntry 15 }
|
||
|
||
tnSAFrameFormatProfileTcpControlBits OBJECT-TYPE
|
||
SYNTAX Unsigned32 (0..63)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Control bits for L3 IP/TCP frames."
|
||
DEFVAL { 16 }
|
||
::= { tnSAFrameFormatProfileEntry 16 }
|
||
|
||
tnSAFrameFormatProfileTcpWindowSize OBJECT-TYPE
|
||
SYNTAX Unsigned32 (0..65535)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Window size for L3 IP/TCP frames."
|
||
DEFVAL { 16 }
|
||
::= { tnSAFrameFormatProfileEntry 17 }
|
||
|
||
tnSAFrameFormatProfileLlcSnapOui OBJECT-TYPE
|
||
SYNTAX Unsigned32 (0.. 16777215)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
" LLC/SNAP OUI field <20> 3 bytes"
|
||
::= { tnSAFrameFormatProfileEntry 18 }
|
||
|
||
tnSAFrameFormatProfileLlcSnapProto OBJECT-TYPE
|
||
SYNTAX Unsigned32 (0..65535)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
" LLC/SNAP protocol field"
|
||
::= { tnSAFrameFormatProfileEntry 19 }
|
||
|
||
tnSAFrameFormatProfileIpDestIpAddress OBJECT-TYPE
|
||
SYNTAX IpAddress
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
" Destination IP address"
|
||
::= { tnSAFrameFormatProfileEntry 20 }
|
||
|
||
tnSAFrameFormatProfileIpSrcIpAddress OBJECT-TYPE
|
||
SYNTAX IpAddress
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
" Source IP address"
|
||
::= { tnSAFrameFormatProfileEntry 21 }
|
||
|
||
tnSAFrameFormatProfilePayloadFillPattern OBJECT-TYPE
|
||
SYNTAX Unsigned32 (0..4294967295)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
" Payload filler pattern(value entered in decimal)."
|
||
::= { tnSAFrameFormatProfileEntry 22 }
|
||
|
||
tnSAFrameFormatProfileMEGLevel OBJECT-TYPE
|
||
SYNTAX Unsigned32 (0..7)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
" Level of MEG that is used by ETH-TST frames."
|
||
::= { tnSAFrameFormatProfileEntry 23 }
|
||
|
||
--
|
||
-- DM bins threshold configuration table
|
||
--
|
||
tnDmBinThresholdTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF TnDmBinThresholdEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Table of DM bin thresholds."
|
||
::= { tnSaMIB 9 }
|
||
|
||
tnDmBinThresholdEntry OBJECT-TYPE
|
||
SYNTAX TnDmBinThresholdEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"An entry in the SA tnDmBinThresholdTable."
|
||
INDEX {
|
||
tnSAProfileID,
|
||
tnDmBinThresholdIndex
|
||
} ::= { tnDmBinThresholdTable 1 }
|
||
|
||
TnDmBinThresholdEntry ::= SEQUENCE {
|
||
tnDmBinThresholdIndex Unsigned32,
|
||
tnDmBinThresholdValue Unsigned32
|
||
}
|
||
|
||
tnDmBinThresholdIndex OBJECT-TYPE
|
||
SYNTAX Unsigned32 (1..10)
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"DM bin threshold index."
|
||
::= { tnDmBinThresholdEntry 1 }
|
||
|
||
tnDmBinThresholdValue OBJECT-TYPE
|
||
SYNTAX Unsigned32 (0..10000000)
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"DM bin threshold value in usec. Zero value is used to delete threshold."
|
||
::= { tnDmBinThresholdEntry 2 }
|
||
|
||
--
|
||
-- DMV bins threshold configuration table
|
||
--
|
||
tnDmvBinThresholdTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF TnDmvBinThresholdEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Table of DMV bin thresholds."
|
||
::= { tnSaMIB 10 }
|
||
|
||
tnDmvBinThresholdEntry OBJECT-TYPE
|
||
SYNTAX TnDmvBinThresholdEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"An entry in the SA tnDmvBinThresholdTable."
|
||
INDEX {
|
||
tnSAProfileID,
|
||
tnDmvBinThresholdIndex
|
||
} ::= { tnDmvBinThresholdTable 1 }
|
||
|
||
TnDmvBinThresholdEntry ::= SEQUENCE {
|
||
tnDmvBinThresholdIndex Unsigned32,
|
||
tnDmvBinThresholdValue Unsigned32
|
||
}
|
||
|
||
tnDmvBinThresholdIndex OBJECT-TYPE
|
||
SYNTAX Unsigned32 (1..10)
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"DM bin threshold index."
|
||
::= { tnDmvBinThresholdEntry 1 }
|
||
|
||
tnDmvBinThresholdValue OBJECT-TYPE
|
||
SYNTAX Unsigned32 (0..10000000)
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"DM bin threshold value in usec. Zero value is used to delete threshold."
|
||
::= { tnDmvBinThresholdEntry 2 }
|
||
|
||
--
|
||
-- SA Test table
|
||
--
|
||
tnSATestTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF TnSATestEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The SA Test Table. Entries in this table
|
||
represent Service Activation test attributes.
|
||
|
||
The index structure is the test ID."
|
||
::= { tnSaMIB 11 }
|
||
|
||
tnSATestEntry OBJECT-TYPE
|
||
SYNTAX TnSATestEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"An entry in the tnSATestTable."
|
||
INDEX {
|
||
tnSATestID
|
||
}
|
||
::= { tnSATestTable 1 }
|
||
|
||
TnSATestEntry ::= SEQUENCE {
|
||
tnSATestID Unsigned32,
|
||
tnSATestSAProfileId Unsigned32,
|
||
tnSATestIngressEncapsulationType TnSATestEncapsulationType,
|
||
tnSATestIngressInnerVid Unsigned32,
|
||
tnSATestIngressInnerPcp Unsigned32,
|
||
tnSATestIngressOuterVid Unsigned32,
|
||
tnSATestIngressOuterPcp Unsigned32,
|
||
tnSATestEgressEncapsulationType TnSATestEncapsulationType,
|
||
tnSATestEgressInnerVid Unsigned32,
|
||
tnSATestEgressInnerPcp Unsigned32,
|
||
tnSATestEgressOuterVid Unsigned32,
|
||
tnSATestEgressOuterPcp Unsigned32,
|
||
tnSATestIngressPort Unsigned32,
|
||
tnSATestCollectorIngressPort Unsigned32,
|
||
tnSATestCollectorIpAddr IpAddress,
|
||
tnSATestName DisplayString,
|
||
tnSATestCir Counter64,
|
||
tnSATestCbs Unsigned32,
|
||
tnSATestEir Counter64,
|
||
tnSATestEbs Unsigned32,
|
||
tnSATestTargettestMacAddr MacAddress,
|
||
tnSATestAction TnSATestAction,
|
||
tnSATestRowStatus RowStatus
|
||
}
|
||
|
||
tnSATestID OBJECT-TYPE
|
||
SYNTAX Unsigned32 (1..65535)
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The test entry ID."
|
||
::= { tnSATestEntry 1 }
|
||
|
||
tnSATestSAProfileId OBJECT-TYPE
|
||
SYNTAX Unsigned32 (1..65535)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The SA profile ID for the test."
|
||
::= { tnSATestEntry 2 }
|
||
|
||
tnSATestIngressEncapsulationType OBJECT-TYPE
|
||
SYNTAX TnSATestEncapsulationType
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"VLAN tag encapsulation type."
|
||
::= { tnSATestEntry 3 }
|
||
|
||
tnSATestIngressInnerVid OBJECT-TYPE
|
||
SYNTAX Unsigned32 (0..4095)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Ingress Inner VLAN ID."
|
||
::= { tnSATestEntry 4 }
|
||
|
||
tnSATestIngressInnerPcp OBJECT-TYPE
|
||
SYNTAX Unsigned32 (0..7)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Ingress Inner PCP value."
|
||
::= { tnSATestEntry 5 }
|
||
|
||
tnSATestIngressOuterVid OBJECT-TYPE
|
||
SYNTAX Unsigned32 (0..4095)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Ingress Outer VLAN ID."
|
||
::= { tnSATestEntry 6 }
|
||
|
||
tnSATestIngressOuterPcp OBJECT-TYPE
|
||
SYNTAX Unsigned32 (0..7)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Ingress Outer PCP value."
|
||
::= { tnSATestEntry 7 }
|
||
|
||
tnSATestEgressEncapsulationType OBJECT-TYPE
|
||
SYNTAX TnSATestEncapsulationType
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"VLAN tag encapsulation type."
|
||
::= { tnSATestEntry 8 }
|
||
|
||
tnSATestEgressInnerVid OBJECT-TYPE
|
||
SYNTAX Unsigned32 (0..4095)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Egress Inner VLAN ID."
|
||
::= { tnSATestEntry 9 }
|
||
|
||
tnSATestEgressInnerPcp OBJECT-TYPE
|
||
SYNTAX Unsigned32 (0..7)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Egress Inner PCP value."
|
||
::= { tnSATestEntry 10 }
|
||
|
||
tnSATestEgressOuterVid OBJECT-TYPE
|
||
SYNTAX Unsigned32 (0..4095)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Egress Outer VLAN ID."
|
||
::= { tnSATestEntry 11 }
|
||
|
||
tnSATestEgressOuterPcp OBJECT-TYPE
|
||
SYNTAX Unsigned32 (0..7)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Egress Outer PCP value."
|
||
::= { tnSATestEntry 12 }
|
||
|
||
tnSATestIngressPort OBJECT-TYPE
|
||
SYNTAX Unsigned32
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Ingress port number."
|
||
::= { tnSATestEntry 13 }
|
||
|
||
tnSATestCollectorIngressPort OBJECT-TYPE
|
||
SYNTAX Unsigned32
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Collector's ingress port number."
|
||
::= { tnSATestEntry 14 }
|
||
|
||
tnSATestCollectorIpAddr OBJECT-TYPE
|
||
SYNTAX IpAddress
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"IP address of the collector."
|
||
::= { tnSATestEntry 15 }
|
||
|
||
tnSATestName OBJECT-TYPE
|
||
SYNTAX DisplayString
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Test name."
|
||
::= { tnSATestEntry 16 }
|
||
|
||
tnSATestCir OBJECT-TYPE
|
||
SYNTAX Counter64
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"CIR. In Kbps."
|
||
::= { tnSATestEntry 17 }
|
||
|
||
tnSATestCbs OBJECT-TYPE
|
||
SYNTAX Unsigned32
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"CBS. In bytes."
|
||
::= { tnSATestEntry 18 }
|
||
|
||
tnSATestEir OBJECT-TYPE
|
||
SYNTAX Counter64
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"EIR. In Kbps."
|
||
::= { tnSATestEntry 19 }
|
||
|
||
tnSATestEbs OBJECT-TYPE
|
||
SYNTAX Unsigned32
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"EBS. In bytes."
|
||
::= { tnSATestEntry 20 }
|
||
|
||
tnSATestTargettestMacAddr OBJECT-TYPE
|
||
SYNTAX MacAddress
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Target Test MAC address (to be used for Loopback test only)."
|
||
::= { tnSATestEntry 21 }
|
||
|
||
tnSATestAction OBJECT-TYPE
|
||
SYNTAX TnSATestAction
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This attribute allow start/stop test."
|
||
::= { tnSATestEntry 22 }
|
||
|
||
tnSATestRowStatus OBJECT-TYPE
|
||
SYNTAX RowStatus
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The row status. To create a row, set the instance of
|
||
this variable for the new row to 'createAndGo'. To
|
||
delete a row, set the instance of this variable for
|
||
the row to delete to 'destroy'."
|
||
::= { tnSATestEntry 23 }
|
||
|
||
--
|
||
-- Common Test Results
|
||
--
|
||
tnSACommonTestResultsTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF TnSACommonTestResultsEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Common test results."
|
||
::= { tnSaMIB 12 }
|
||
|
||
tnSACommonTestResultsEntry OBJECT-TYPE
|
||
SYNTAX TnSACommonTestResultsEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"An entry in the tnSACommonTestResultsTable."
|
||
INDEX {
|
||
tnSACommonTestResultsTestId
|
||
}
|
||
::= { tnSACommonTestResultsTable 1 }
|
||
|
||
TnSACommonTestResultsEntry ::= SEQUENCE {
|
||
tnSACommonTestResultsTestId Unsigned32,
|
||
tnSACommonTestResultsTestStatus TnSATestStatus,
|
||
tnSACommonTestResultsEgressPort Unsigned32,
|
||
tnSACommonTestResultsCbsLineRate Unsigned32,
|
||
tnSACommonTestResultsDirectionality TnSADirectionality,
|
||
tnSACommonTestResultsFrameLossRatio Unsigned32,
|
||
tnSACommonTestResultsYellowPcpList Unsigned32,
|
||
tnSACommonTestResultsFrameSizeMix OCTET STRING,
|
||
tnSACommonTestResultsRateDecStep Unsigned32,
|
||
tnSACommonTestResultsRateStepLength Unsigned32,
|
||
tnSACommonTestResultsFrameFormatFrameLevel TnSAFrameLevel,
|
||
tnSACommonTestResultsStepsToExecute Unsigned32,
|
||
tnSACommonTestResultsFrameFormatPaylodFiller TnSAPaylodFiller,
|
||
tnSACommonTestResultsFrameFormatEncapsulationL2 TnSAL2Encaps,
|
||
tnSACommonTestResultsFrameFormatEncapsulationL3 TnSAL3Encaps,
|
||
tnSACommonTestResultsFrameFormatEthType Unsigned32,
|
||
tnSACommonTestResultsFrameFormatIpDscp Unsigned32,
|
||
tnSACommonTestResultsFrameFormatIpEcn Unsigned32,
|
||
tnSACommonTestResultsFrameFormatIpFlags Unsigned32,
|
||
tnSACommonTestResultsFrameFormatIpTtl Unsigned32,
|
||
tnSACommonTestResultsFrameFormatUdpSrcPort Unsigned32,
|
||
tnSACommonTestResultsFrameFormatUdpDstPort Unsigned32,
|
||
tnSACommonTestResultsFrameFormatTcpSrcPort Unsigned32,
|
||
tnSACommonTestResultsFrameFormatTcpDstPort Unsigned32,
|
||
tnSACommonTestResultsFrameFormatTcpSeqNum Unsigned32,
|
||
tnSACommonTestResultsFrameFormatTcpAckNum Unsigned32,
|
||
tnSACommonTestResultsFrameFormatTcpControlBits Unsigned32,
|
||
tnSACommonTestResultsFrameFormatTcpWindowSize Unsigned32,
|
||
tnSACommonTestResultsFrameFormatLlcSnapOui Unsigned32,
|
||
tnSACommonTestResultsFrameFormatLlcSnapProto Unsigned32,
|
||
tnSACommonTestResultsFrameFormatIpDestIpAddress IpAddress,
|
||
tnSACommonTestResultsThroughputTestElapsedTime Unsigned32,
|
||
tnSACommonTestResultsLatencyTestElapsedTime Unsigned32,
|
||
tnSACommonTestResultsFlrTestElapsedTime Unsigned32,
|
||
tnSACommonTestResultsBacktoBackTestElapsedTime Unsigned32,
|
||
tnSACommonTestResultsThroughputTestResult TnSATestResStatus,
|
||
tnSACommonTestResultsLatencyTestResult TnSATestResStatus,
|
||
tnSACommonTestResultsFlrTestResult TnSATestResStatus,
|
||
tnSACommonTestResultsBacktoBackTestResult TnSATestResStatus,
|
||
tnSACommonTestResultsLastError DisplayString,
|
||
tnSACommonTestResultsTestIngressEncapsulationType TnSATestEncapsulationType,
|
||
tnSACommonTestResultsTestIngressInnerVid Unsigned32,
|
||
tnSACommonTestResultsTestIngressInnerPcp Unsigned32,
|
||
tnSACommonTestResultsTestIngressOuterVid Unsigned32,
|
||
tnSACommonTestResultsTestIngressOuterPcp Unsigned32,
|
||
tnSACommonTestResultsTestEgressEncapsulationType TnSATestEncapsulationType,
|
||
tnSACommonTestResultsTestEgressInnerVid Unsigned32,
|
||
tnSACommonTestResultsTestEgressInnerPcp Unsigned32,
|
||
tnSACommonTestResultsTestEgressOuterVid Unsigned32,
|
||
tnSACommonTestResultsTestEgressOuterPcp Unsigned32,
|
||
tnSACommonTestResultsTestIngressPort Unsigned32,
|
||
tnSACommonTestResultsTestCollectorIngressPort Unsigned32,
|
||
tnSACommonTestResultsTestCir Counter64,
|
||
tnSACommonTestResultsTestCbs Unsigned32,
|
||
tnSACommonTestResultsTestEir Counter64,
|
||
tnSACommonTestResultsTestEbs Unsigned32
|
||
}
|
||
|
||
tnSACommonTestResultsTestId OBJECT-TYPE
|
||
SYNTAX Unsigned32 (1..65535)
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The report Test ID."
|
||
::= { tnSACommonTestResultsEntry 1 }
|
||
|
||
tnSACommonTestResultsTestStatus OBJECT-TYPE
|
||
SYNTAX TnSATestStatus
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Test status."
|
||
::= { tnSACommonTestResultsEntry 2 }
|
||
|
||
tnSACommonTestResultsEgressPort OBJECT-TYPE
|
||
SYNTAX Unsigned32
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Egress port number."
|
||
::= { tnSACommonTestResultsEntry 3 }
|
||
|
||
tnSACommonTestResultsCbsLineRate OBJECT-TYPE
|
||
SYNTAX Unsigned32
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Line rate at which burst traffic should be sent for the Back-to-back frames test. In Mbps."
|
||
::= { tnSACommonTestResultsEntry 4 }
|
||
|
||
tnSACommonTestResultsDirectionality OBJECT-TYPE
|
||
SYNTAX TnSADirectionality
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Directionality of the tests: uni-directional, bi-directional or loopback based."
|
||
::= { tnSACommonTestResultsEntry 5 }
|
||
|
||
tnSACommonTestResultsFrameLossRatio OBJECT-TYPE
|
||
SYNTAX Unsigned32 (0..10000)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Acceptable frame loss ratio (expressed in percentage,
|
||
with 2 decimals (i.e. 99.99 %)."
|
||
::= { tnSACommonTestResultsEntry 6 }
|
||
|
||
tnSACommonTestResultsYellowPcpList OBJECT-TYPE
|
||
SYNTAX Unsigned32 (0..255)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"List of PCP values corresponding to yellow frame. Bitmask."
|
||
::= { tnSACommonTestResultsEntry 7 }
|
||
|
||
tnSACommonTestResultsFrameSizeMix OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(1..20))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Traffic frame size mix, for throughput tests."
|
||
::= { tnSACommonTestResultsEntry 8 }
|
||
|
||
tnSACommonTestResultsRateDecStep OBJECT-TYPE
|
||
SYNTAX Unsigned32 (0..100)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
" Rate decrease step size, in percentage."
|
||
::= { tnSACommonTestResultsEntry 9 }
|
||
|
||
tnSACommonTestResultsRateStepLength OBJECT-TYPE
|
||
SYNTAX Unsigned32 (10..60)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Rate step length, in seconds."
|
||
::= { tnSACommonTestResultsEntry 10 }
|
||
|
||
tnSACommonTestResultsFrameFormatFrameLevel OBJECT-TYPE
|
||
SYNTAX TnSAFrameLevel
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Frame level <20> L2 or L3."
|
||
::= { tnSACommonTestResultsEntry 11 }
|
||
|
||
tnSACommonTestResultsStepsToExecute OBJECT-TYPE
|
||
SYNTAX Unsigned32 (0.. 2047)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"List of tests to execute <20> bitmask:
|
||
-Throughput (bit 1)
|
||
-Latency (bit 2)
|
||
-Frame Loss Rate (bit 3)
|
||
-Back To Back Frames (bit 4)"
|
||
::= { tnSACommonTestResultsEntry 12 }
|
||
|
||
tnSACommonTestResultsFrameFormatPaylodFiller OBJECT-TYPE
|
||
SYNTAX TnSAPaylodFiller
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Paylod filler."
|
||
::= { tnSACommonTestResultsEntry 13 }
|
||
|
||
tnSACommonTestResultsFrameFormatEncapsulationL2 OBJECT-TYPE
|
||
SYNTAX TnSAL2Encaps
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Encapsulation type for L2 frames."
|
||
::= { tnSACommonTestResultsEntry 14 }
|
||
|
||
tnSACommonTestResultsFrameFormatEncapsulationL3 OBJECT-TYPE
|
||
SYNTAX TnSAL3Encaps
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Encapsulation type for L3 frames."
|
||
::= { tnSACommonTestResultsEntry 15 }
|
||
|
||
tnSACommonTestResultsFrameFormatEthType OBJECT-TYPE
|
||
SYNTAX Unsigned32 (0..65535)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Custom Eth-Type for L2 ETH-TST frames."
|
||
::= { tnSACommonTestResultsEntry 16 }
|
||
|
||
tnSACommonTestResultsFrameFormatIpDscp OBJECT-TYPE
|
||
SYNTAX Unsigned32 (0..63)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"DSCP value for L3 IP frames."
|
||
::= { tnSACommonTestResultsEntry 17 }
|
||
|
||
tnSACommonTestResultsFrameFormatIpEcn OBJECT-TYPE
|
||
SYNTAX Unsigned32 (0..3)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ECN value for L3 IP frames."
|
||
::= { tnSACommonTestResultsEntry 18 }
|
||
|
||
tnSACommonTestResultsFrameFormatIpFlags OBJECT-TYPE
|
||
SYNTAX Unsigned32 (0..7)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Flags value for L3 IP frames."
|
||
::= { tnSACommonTestResultsEntry 19 }
|
||
|
||
tnSACommonTestResultsFrameFormatIpTtl OBJECT-TYPE
|
||
SYNTAX Unsigned32 (0..255)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"TTL value for L3 IP frames."
|
||
::= { tnSACommonTestResultsEntry 20 }
|
||
|
||
tnSACommonTestResultsFrameFormatUdpSrcPort OBJECT-TYPE
|
||
SYNTAX Unsigned32 (0..65535)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Source port for L3 IP/UDP frames."
|
||
::= { tnSACommonTestResultsEntry 21 }
|
||
|
||
tnSACommonTestResultsFrameFormatUdpDstPort OBJECT-TYPE
|
||
SYNTAX Unsigned32 (0..65535)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Destination port for L3 IP/UDP frames."
|
||
::= { tnSACommonTestResultsEntry 22 }
|
||
|
||
tnSACommonTestResultsFrameFormatTcpSrcPort OBJECT-TYPE
|
||
SYNTAX Unsigned32 (0..65535)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Source port for L3 IP/TCP frames."
|
||
::= { tnSACommonTestResultsEntry 23 }
|
||
|
||
tnSACommonTestResultsFrameFormatTcpDstPort OBJECT-TYPE
|
||
SYNTAX Unsigned32 (0..65535)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Destination port for L3 IP/TCP frames."
|
||
::= { tnSACommonTestResultsEntry 24 }
|
||
|
||
tnSACommonTestResultsFrameFormatTcpSeqNum OBJECT-TYPE
|
||
SYNTAX Unsigned32
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Sequence number for L3 IP/TCP frames."
|
||
::= { tnSACommonTestResultsEntry 25 }
|
||
|
||
tnSACommonTestResultsFrameFormatTcpAckNum OBJECT-TYPE
|
||
SYNTAX Unsigned32
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ACK number for L3 IP/TCP frames."
|
||
::= { tnSACommonTestResultsEntry 26 }
|
||
|
||
tnSACommonTestResultsFrameFormatTcpControlBits OBJECT-TYPE
|
||
SYNTAX Unsigned32 (0..63)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Control bits for L3 IP/TCP frames."
|
||
::= { tnSACommonTestResultsEntry 27 }
|
||
|
||
tnSACommonTestResultsFrameFormatTcpWindowSize OBJECT-TYPE
|
||
SYNTAX Unsigned32 (0..65535)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Window size for L3 IP/TCP frames."
|
||
::= { tnSACommonTestResultsEntry 28 }
|
||
|
||
tnSACommonTestResultsFrameFormatLlcSnapOui OBJECT-TYPE
|
||
SYNTAX Unsigned32 (0.. 16777215)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
" LLC/SNAP OUI field <20> 3 bytes"
|
||
::= { tnSACommonTestResultsEntry 29 }
|
||
|
||
tnSACommonTestResultsFrameFormatLlcSnapProto OBJECT-TYPE
|
||
SYNTAX Unsigned32 (0..65535)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
" LLC/SNAP protocol field"
|
||
::= { tnSACommonTestResultsEntry 30 }
|
||
|
||
tnSACommonTestResultsFrameFormatIpDestIpAddress OBJECT-TYPE
|
||
SYNTAX IpAddress
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
" Destination IP address"
|
||
::= { tnSACommonTestResultsEntry 31 }
|
||
|
||
tnSACommonTestResultsThroughputTestElapsedTime OBJECT-TYPE
|
||
SYNTAX Unsigned32
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Total elapsed time for Throughput test in seconds."
|
||
::= { tnSACommonTestResultsEntry 32 }
|
||
|
||
tnSACommonTestResultsLatencyTestElapsedTime OBJECT-TYPE
|
||
SYNTAX Unsigned32
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Total elapsed time for Latency test in seconds."
|
||
::= { tnSACommonTestResultsEntry 33 }
|
||
|
||
tnSACommonTestResultsFlrTestElapsedTime OBJECT-TYPE
|
||
SYNTAX Unsigned32
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Total elapsed time for FLR test in seconds."
|
||
::= { tnSACommonTestResultsEntry 34 }
|
||
|
||
tnSACommonTestResultsBacktoBackTestElapsedTime OBJECT-TYPE
|
||
SYNTAX Unsigned32
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Total elapsed time for Back to Back test in seconds."
|
||
::= { tnSACommonTestResultsEntry 35 }
|
||
|
||
tnSACommonTestResultsThroughputTestResult OBJECT-TYPE
|
||
SYNTAX TnSATestResStatus
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Throughput test result."
|
||
::= { tnSACommonTestResultsEntry 36 }
|
||
|
||
tnSACommonTestResultsLatencyTestResult OBJECT-TYPE
|
||
SYNTAX TnSATestResStatus
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Latency test result."
|
||
::= { tnSACommonTestResultsEntry 37 }
|
||
|
||
tnSACommonTestResultsFlrTestResult OBJECT-TYPE
|
||
SYNTAX TnSATestResStatus
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"FLR test result."
|
||
::= { tnSACommonTestResultsEntry 38 }
|
||
|
||
tnSACommonTestResultsBacktoBackTestResult OBJECT-TYPE
|
||
SYNTAX TnSATestResStatus
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Back to back test result."
|
||
::= { tnSACommonTestResultsEntry 39 }
|
||
|
||
tnSACommonTestResultsLastError OBJECT-TYPE
|
||
SYNTAX DisplayString
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The last error string."
|
||
::= { tnSACommonTestResultsEntry 40 }
|
||
|
||
tnSACommonTestResultsTestIngressEncapsulationType OBJECT-TYPE
|
||
SYNTAX TnSATestEncapsulationType
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"VLAN tag encapsulation type."
|
||
::= { tnSACommonTestResultsEntry 41 }
|
||
|
||
tnSACommonTestResultsTestIngressInnerVid OBJECT-TYPE
|
||
SYNTAX Unsigned32 (0..4095)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Ingress Inner VLAN ID."
|
||
::= { tnSACommonTestResultsEntry 42 }
|
||
|
||
tnSACommonTestResultsTestIngressInnerPcp OBJECT-TYPE
|
||
SYNTAX Unsigned32 (0..7)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Ingress Inner PCP value."
|
||
::= { tnSACommonTestResultsEntry 43 }
|
||
|
||
tnSACommonTestResultsTestIngressOuterVid OBJECT-TYPE
|
||
SYNTAX Unsigned32 (0..4095)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Ingress Outer VLAN ID."
|
||
::= { tnSACommonTestResultsEntry 44 }
|
||
|
||
tnSACommonTestResultsTestIngressOuterPcp OBJECT-TYPE
|
||
SYNTAX Unsigned32 (0..7)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Ingress Outer PCP value."
|
||
::= { tnSACommonTestResultsEntry 45 }
|
||
|
||
tnSACommonTestResultsTestEgressEncapsulationType OBJECT-TYPE
|
||
SYNTAX TnSATestEncapsulationType
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"VLAN tag encapsulation type."
|
||
::= { tnSACommonTestResultsEntry 46 }
|
||
|
||
tnSACommonTestResultsTestEgressInnerVid OBJECT-TYPE
|
||
SYNTAX Unsigned32 (0..4095)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Egress Inner VLAN ID."
|
||
::= { tnSACommonTestResultsEntry 47 }
|
||
|
||
tnSACommonTestResultsTestEgressInnerPcp OBJECT-TYPE
|
||
SYNTAX Unsigned32 (0..7)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Egress Inner PCP value."
|
||
::= { tnSACommonTestResultsEntry 48 }
|
||
|
||
tnSACommonTestResultsTestEgressOuterVid OBJECT-TYPE
|
||
SYNTAX Unsigned32 (0..4095)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Egress Outer VLAN ID."
|
||
::= { tnSACommonTestResultsEntry 49 }
|
||
|
||
tnSACommonTestResultsTestEgressOuterPcp OBJECT-TYPE
|
||
SYNTAX Unsigned32 (0..7)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Egress Outer PCP value."
|
||
::= { tnSACommonTestResultsEntry 50 }
|
||
|
||
tnSACommonTestResultsTestIngressPort OBJECT-TYPE
|
||
SYNTAX Unsigned32
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Ingress port number."
|
||
::= { tnSACommonTestResultsEntry 51 }
|
||
|
||
tnSACommonTestResultsTestCollectorIngressPort OBJECT-TYPE
|
||
SYNTAX Unsigned32
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Collector's ingress port number."
|
||
::= { tnSACommonTestResultsEntry 52 }
|
||
|
||
tnSACommonTestResultsTestCir OBJECT-TYPE
|
||
SYNTAX Counter64
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"CIR. In Kbps."
|
||
::= { tnSACommonTestResultsEntry 53 }
|
||
|
||
tnSACommonTestResultsTestCbs OBJECT-TYPE
|
||
SYNTAX Unsigned32
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"CBS. In bytes."
|
||
::= { tnSACommonTestResultsEntry 54 }
|
||
|
||
tnSACommonTestResultsTestEir OBJECT-TYPE
|
||
SYNTAX Counter64
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"EIR. In Kbps."
|
||
::= { tnSACommonTestResultsEntry 55 }
|
||
|
||
tnSACommonTestResultsTestEbs OBJECT-TYPE
|
||
SYNTAX Unsigned32
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"EBS. In bytes."
|
||
::= { tnSACommonTestResultsEntry 56 }
|
||
|
||
--
|
||
-- Common Test Results. DM bins threshold table
|
||
--
|
||
tnSACommonTestResultsDmBinThresholdTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF TnSACommonTestResultsDmBinThresholdEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Table of DM bin thresholds used for this test."
|
||
::= { tnSaMIB 13 }
|
||
|
||
tnSACommonTestResultsDmBinThresholdEntry OBJECT-TYPE
|
||
SYNTAX TnSACommonTestResultsDmBinThresholdEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"An entry in the SA tnSACommonTestResultsDmBinThresholdTable."
|
||
INDEX {
|
||
tnSACommonTestResultsTestId,
|
||
tnSACommonTestResultsDmBinThresholdIndex
|
||
} ::= { tnSACommonTestResultsDmBinThresholdTable 1 }
|
||
|
||
TnSACommonTestResultsDmBinThresholdEntry ::= SEQUENCE {
|
||
tnSACommonTestResultsDmBinThresholdIndex Unsigned32,
|
||
tnSACommonTestResultsDmBinThresholdValue Unsigned32
|
||
}
|
||
|
||
tnSACommonTestResultsDmBinThresholdIndex OBJECT-TYPE
|
||
SYNTAX Unsigned32 (1..10)
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"DM bin threshold index."
|
||
::= { tnSACommonTestResultsDmBinThresholdEntry 1 }
|
||
|
||
tnSACommonTestResultsDmBinThresholdValue OBJECT-TYPE
|
||
SYNTAX Unsigned32 (0..10000000)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"DM bin threshold value in usec."
|
||
::= { tnSACommonTestResultsDmBinThresholdEntry 2 }
|
||
|
||
--
|
||
-- Common Test Results. DMV bins threshold table
|
||
--
|
||
tnSACommonTestResultsDmvBinThresholdTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF TnSACommonTestResultsDmvBinThresholdEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Table of DMV bin thresholds used fot this test."
|
||
::= { tnSaMIB 14 }
|
||
|
||
tnSACommonTestResultsDmvBinThresholdEntry OBJECT-TYPE
|
||
SYNTAX TnSACommonTestResultsDmvBinThresholdEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"An entry in the SA tnSACommonTestResultsDmvBinThresholdTable."
|
||
INDEX {
|
||
tnSACommonTestResultsTestId,
|
||
tnSACommonTestResultsDmvBinThresholdIndex
|
||
} ::= { tnSACommonTestResultsDmvBinThresholdTable 1 }
|
||
|
||
TnSACommonTestResultsDmvBinThresholdEntry ::= SEQUENCE {
|
||
tnSACommonTestResultsDmvBinThresholdIndex Unsigned32,
|
||
tnSACommonTestResultsDmvBinThresholdValue Unsigned32
|
||
}
|
||
|
||
tnSACommonTestResultsDmvBinThresholdIndex OBJECT-TYPE
|
||
SYNTAX Unsigned32 (1..10)
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"DM bin threshold index."
|
||
::= { tnSACommonTestResultsDmvBinThresholdEntry 1 }
|
||
|
||
tnSACommonTestResultsDmvBinThresholdValue OBJECT-TYPE
|
||
SYNTAX Unsigned32 (0..10000000)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"DM bin threshold value in usec. Zero value is used to delete threshold."
|
||
::= { tnSACommonTestResultsDmvBinThresholdEntry 2 }
|
||
|
||
--
|
||
-- Throughput Test Results
|
||
--
|
||
tnSAThroughputTestResultsTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF TnSAThroughputTestResultsEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Table for Throughput Test Results."
|
||
::= { tnSaMIB 15 }
|
||
|
||
tnSAThroughputTestResultsEntry OBJECT-TYPE
|
||
SYNTAX TnSAThroughputTestResultsEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"An entry in the tnSAThroughputTestResultsTable."
|
||
INDEX {
|
||
tnSAThroughputTestResultsTestId,
|
||
tnSAThroughputTestResultsStepNumber
|
||
}
|
||
::= { tnSAThroughputTestResultsTable 1 }
|
||
|
||
TnSAThroughputTestResultsEntry ::= SEQUENCE {
|
||
tnSAThroughputTestResultsTestId Unsigned32,
|
||
tnSAThroughputTestResultsStepNumber Unsigned32,
|
||
tnSAThroughputTestResultsDirection TnSATestDirection,
|
||
tnSAThroughputTestResultsActualRate Counter64,
|
||
tnSAThroughputTestResultsStepDuration Unsigned32,
|
||
tnSAThroughputTestResultsTxFrames Counter64,
|
||
tnSAThroughputTestResultsRxGreenFrames Counter64,
|
||
tnSAThroughputTestResultsRxYellowFrames Counter64,
|
||
tnSAThroughputTestResultsStepResult TnSATestStepResult,
|
||
tnSAThroughputTestResultsFrameSize Unsigned32
|
||
}
|
||
|
||
tnSAThroughputTestResultsTestId OBJECT-TYPE
|
||
SYNTAX Unsigned32 (1..65535)
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The report Test ID."
|
||
::= { tnSAThroughputTestResultsEntry 1 }
|
||
|
||
tnSAThroughputTestResultsStepNumber OBJECT-TYPE
|
||
SYNTAX Unsigned32(1..10)
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Test step number."
|
||
::= { tnSAThroughputTestResultsEntry 2 }
|
||
|
||
tnSAThroughputTestResultsDirection OBJECT-TYPE
|
||
SYNTAX TnSATestDirection
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The report direction."
|
||
::= { tnSAThroughputTestResultsEntry 3 }
|
||
|
||
tnSAThroughputTestResultsActualRate OBJECT-TYPE
|
||
SYNTAX Counter64
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Actual rate in Kbps."
|
||
::= { tnSAThroughputTestResultsEntry 4 }
|
||
|
||
tnSAThroughputTestResultsStepDuration OBJECT-TYPE
|
||
SYNTAX Unsigned32
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Step duration in seconds."
|
||
::= { tnSAThroughputTestResultsEntry 5 }
|
||
|
||
tnSAThroughputTestResultsTxFrames OBJECT-TYPE
|
||
SYNTAX Counter64
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Transmitted frames."
|
||
::= { tnSAThroughputTestResultsEntry 6 }
|
||
|
||
tnSAThroughputTestResultsRxGreenFrames OBJECT-TYPE
|
||
SYNTAX Counter64
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Received green frames."
|
||
::= { tnSAThroughputTestResultsEntry 7 }
|
||
|
||
tnSAThroughputTestResultsRxYellowFrames OBJECT-TYPE
|
||
SYNTAX Counter64
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Received yellow frames."
|
||
::= { tnSAThroughputTestResultsEntry 8 }
|
||
|
||
tnSAThroughputTestResultsStepResult OBJECT-TYPE
|
||
SYNTAX TnSATestStepResult
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Step result."
|
||
::= { tnSAThroughputTestResultsEntry 9 }
|
||
|
||
tnSAThroughputTestResultsFrameSize OBJECT-TYPE
|
||
SYNTAX Unsigned32
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Frame size."
|
||
::= { tnSAThroughputTestResultsEntry 10 }
|
||
|
||
--
|
||
-- Latency Test Results
|
||
--
|
||
tnSALatencyTestResultsTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF TnSALatencyTestResultsEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Table for Latency Test Results."
|
||
::= { tnSaMIB 16 }
|
||
|
||
tnSALatencyTestResultsEntry OBJECT-TYPE
|
||
SYNTAX TnSALatencyTestResultsEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"An entry in the tnSALatencyTestResultsTable."
|
||
INDEX {
|
||
tnSALatencyTestResultsTestId,
|
||
tnSALatencyTestResultsStepNumber
|
||
}
|
||
::= { tnSALatencyTestResultsTable 1 }
|
||
|
||
TnSALatencyTestResultsEntry ::= SEQUENCE {
|
||
tnSALatencyTestResultsTestId Unsigned32,
|
||
tnSALatencyTestResultsStepNumber Unsigned32,
|
||
tnSALatencyTestResultsDirection TnSATestDirection,
|
||
tnSALatencyTestResultsStepDuration Unsigned32,
|
||
tnSALatencyTestResultsFrameSize Unsigned32,
|
||
tnSALatencyTestResultsStepResult TnSATestStepResult,
|
||
tnSALatencyTestResultsDmMin Unsigned32,
|
||
tnSALatencyTestResultsDmMax Unsigned32,
|
||
tnSALatencyTestResultsDmAvg Unsigned32,
|
||
tnSALatencyTestResultsDmvMin Unsigned32,
|
||
tnSALatencyTestResultsDmvMax Unsigned32,
|
||
tnSALatencyTestResultsDmvAvg Unsigned32
|
||
}
|
||
|
||
tnSALatencyTestResultsTestId OBJECT-TYPE
|
||
SYNTAX Unsigned32 (1..65535)
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The report Test ID."
|
||
::= { tnSALatencyTestResultsEntry 1 }
|
||
|
||
tnSALatencyTestResultsStepNumber OBJECT-TYPE
|
||
SYNTAX Unsigned32(1..10)
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Test step number."
|
||
::= { tnSALatencyTestResultsEntry 2 }
|
||
|
||
tnSALatencyTestResultsDirection OBJECT-TYPE
|
||
SYNTAX TnSATestDirection
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The report direction."
|
||
::= { tnSALatencyTestResultsEntry 3 }
|
||
|
||
tnSALatencyTestResultsStepDuration OBJECT-TYPE
|
||
SYNTAX Unsigned32
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Step duration in seconds."
|
||
::= { tnSALatencyTestResultsEntry 4 }
|
||
|
||
tnSALatencyTestResultsFrameSize OBJECT-TYPE
|
||
SYNTAX Unsigned32
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Frame size."
|
||
::= { tnSALatencyTestResultsEntry 5 }
|
||
|
||
tnSALatencyTestResultsStepResult OBJECT-TYPE
|
||
SYNTAX TnSATestStepResult
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Step result."
|
||
::= { tnSALatencyTestResultsEntry 6 }
|
||
|
||
tnSALatencyTestResultsDmMin OBJECT-TYPE
|
||
SYNTAX Unsigned32
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Minimal delay in us."
|
||
::= { tnSALatencyTestResultsEntry 7 }
|
||
|
||
tnSALatencyTestResultsDmMax OBJECT-TYPE
|
||
SYNTAX Unsigned32
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Maximal delay in us."
|
||
::= { tnSALatencyTestResultsEntry 8 }
|
||
|
||
tnSALatencyTestResultsDmAvg OBJECT-TYPE
|
||
SYNTAX Unsigned32
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Average delay in us."
|
||
::= { tnSALatencyTestResultsEntry 9 }
|
||
|
||
tnSALatencyTestResultsDmvMin OBJECT-TYPE
|
||
SYNTAX Unsigned32
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Minimal delay variation in us."
|
||
::= { tnSALatencyTestResultsEntry 10 }
|
||
|
||
tnSALatencyTestResultsDmvMax OBJECT-TYPE
|
||
SYNTAX Unsigned32
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Maximal delay variation in us."
|
||
::= { tnSALatencyTestResultsEntry 11 }
|
||
|
||
tnSALatencyTestResultsDmvAvg OBJECT-TYPE
|
||
SYNTAX Unsigned32
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Average delay variation in us."
|
||
::= { tnSALatencyTestResultsEntry 12 }
|
||
|
||
|
||
|
||
--
|
||
-- Latency DM bins threshold results table
|
||
--
|
||
tnSALatencyTestResultsDmBinThresholdTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF TnSALatencyTestResultsDmBinThresholdEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Table for Latency test DM bin counters."
|
||
::= { tnSaMIB 17 }
|
||
|
||
tnSALatencyTestResultsDmBinThresholdEntry OBJECT-TYPE
|
||
SYNTAX TnSALatencyTestResultsDmBinThresholdEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"An entry in the SA tnSALatencyTestResultsDmBinThresholdTable."
|
||
INDEX {
|
||
tnSALatencyTestResultsTestId,
|
||
tnSALatencyTestResultsStepNumber,
|
||
tnSALatencyTestResultsDmBinThresholdIndex
|
||
} ::= { tnSALatencyTestResultsDmBinThresholdTable 1 }
|
||
|
||
TnSALatencyTestResultsDmBinThresholdEntry ::= SEQUENCE {
|
||
tnSALatencyTestResultsDmBinThresholdIndex Unsigned32,
|
||
tnSALatencyTestResultsDmBinThresholdRange Unsigned32,
|
||
tnSALatencyTestResultsDmBinThresholdValue Unsigned32
|
||
}
|
||
|
||
tnSALatencyTestResultsDmBinThresholdIndex OBJECT-TYPE
|
||
SYNTAX Unsigned32 (1..10)
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"DM bin threshold index."
|
||
::= { tnSALatencyTestResultsDmBinThresholdEntry 1 }
|
||
|
||
tnSALatencyTestResultsDmBinThresholdRange OBJECT-TYPE
|
||
SYNTAX Unsigned32 (0..10000000)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"DM bin threshold range."
|
||
::= { tnSALatencyTestResultsDmBinThresholdEntry 2 }
|
||
|
||
tnSALatencyTestResultsDmBinThresholdValue OBJECT-TYPE
|
||
SYNTAX Unsigned32 (0..10000000)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"DM bin counter."
|
||
::= { tnSALatencyTestResultsDmBinThresholdEntry 3 }
|
||
|
||
--
|
||
-- Latency DMV bins threshold results table
|
||
--
|
||
tnSALatencyTestResultsDmvBinThresholdTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF TnSALatencyTestResultsDmvBinThresholdEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Table for Latency test DMV bin counters."
|
||
::= { tnSaMIB 18 }
|
||
|
||
tnSALatencyTestResultsDmvBinThresholdEntry OBJECT-TYPE
|
||
SYNTAX TnSALatencyTestResultsDmvBinThresholdEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"An entry in the SA tnSALatencyTestResultsDmvBinThresholdTable."
|
||
INDEX {
|
||
tnSALatencyTestResultsTestId,
|
||
tnSALatencyTestResultsStepNumber,
|
||
tnSALatencyTestResultsDmvBinThresholdIndex
|
||
} ::= { tnSALatencyTestResultsDmvBinThresholdTable 1 }
|
||
|
||
TnSALatencyTestResultsDmvBinThresholdEntry ::= SEQUENCE {
|
||
tnSALatencyTestResultsDmvBinThresholdIndex Unsigned32,
|
||
tnSALatencyTestResultsDmvBinThresholdRange Unsigned32,
|
||
tnSALatencyTestResultsDmvBinThresholdValue Unsigned32
|
||
}
|
||
|
||
tnSALatencyTestResultsDmvBinThresholdIndex OBJECT-TYPE
|
||
SYNTAX Unsigned32 (1..10)
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"DM bin threshold index."
|
||
::= { tnSALatencyTestResultsDmvBinThresholdEntry 1 }
|
||
|
||
tnSALatencyTestResultsDmvBinThresholdRange OBJECT-TYPE
|
||
SYNTAX Unsigned32 (0..10000000)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"DMV bin threshold range."
|
||
::= { tnSALatencyTestResultsDmvBinThresholdEntry 2 }
|
||
|
||
tnSALatencyTestResultsDmvBinThresholdValue OBJECT-TYPE
|
||
SYNTAX Unsigned32 (0..10000000)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"DMV bin counter."
|
||
::= { tnSALatencyTestResultsDmvBinThresholdEntry 3 }
|
||
|
||
--
|
||
-- Flr Test Results
|
||
--
|
||
tnSAFlrTestResultsTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF TnSAFlrTestResultsEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Table for FLR Test Results."
|
||
::= { tnSaMIB 19 }
|
||
|
||
tnSAFlrTestResultsEntry OBJECT-TYPE
|
||
SYNTAX TnSAFlrTestResultsEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"An entry in the tnSAFlrTestResultsTable."
|
||
INDEX {
|
||
tnSAFlrTestResultsTestId,
|
||
tnSAFlrTestResultsStepNumber
|
||
}
|
||
::= { tnSAFlrTestResultsTable 1 }
|
||
|
||
TnSAFlrTestResultsEntry ::= SEQUENCE {
|
||
tnSAFlrTestResultsTestId Unsigned32,
|
||
tnSAFlrTestResultsStepNumber Unsigned32,
|
||
tnSAFlrTestResultsDirection TnSATestDirection,
|
||
tnSAFlrTestResultsActualRate Counter64,
|
||
tnSAFlrTestResultsStepDuration Unsigned32,
|
||
tnSAFlrTestResultsTxFrames Counter64,
|
||
tnSAFlrTestResultsRxGreenFrames Counter64,
|
||
tnSAFlrTestResultsRxYellowFrames Counter64,
|
||
tnSAFlrTestResultsFlr Unsigned32,
|
||
tnSAFlrTestResultsStepResult TnSATestStepResult,
|
||
tnSAFlrTestResultsFrameSize Unsigned32,
|
||
tnSAFlrTestResultsOutOfSeqEvents Unsigned32
|
||
}
|
||
|
||
tnSAFlrTestResultsTestId OBJECT-TYPE
|
||
SYNTAX Unsigned32 (1..65535)
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The report Test ID."
|
||
::= { tnSAFlrTestResultsEntry 1 }
|
||
|
||
tnSAFlrTestResultsStepNumber OBJECT-TYPE
|
||
SYNTAX Unsigned32(1..10)
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Test step number."
|
||
::= { tnSAFlrTestResultsEntry 2 }
|
||
|
||
tnSAFlrTestResultsDirection OBJECT-TYPE
|
||
SYNTAX TnSATestDirection
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The report direction."
|
||
::= { tnSAFlrTestResultsEntry 3 }
|
||
|
||
tnSAFlrTestResultsActualRate OBJECT-TYPE
|
||
SYNTAX Counter64
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Actual rate in Kbps."
|
||
::= { tnSAFlrTestResultsEntry 4 }
|
||
|
||
tnSAFlrTestResultsStepDuration OBJECT-TYPE
|
||
SYNTAX Unsigned32
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Step duration in seconds."
|
||
::= { tnSAFlrTestResultsEntry 5 }
|
||
|
||
tnSAFlrTestResultsTxFrames OBJECT-TYPE
|
||
SYNTAX Counter64
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Transmitted frames."
|
||
::= { tnSAFlrTestResultsEntry 6 }
|
||
|
||
tnSAFlrTestResultsRxGreenFrames OBJECT-TYPE
|
||
SYNTAX Counter64
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Received green frames."
|
||
::= { tnSAFlrTestResultsEntry 7 }
|
||
|
||
tnSAFlrTestResultsRxYellowFrames OBJECT-TYPE
|
||
SYNTAX Counter64
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Received yellow frames."
|
||
::= { tnSAFlrTestResultsEntry 8 }
|
||
|
||
tnSAFlrTestResultsFlr OBJECT-TYPE
|
||
SYNTAX Unsigned32
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Calculated frame loss ratio."
|
||
::= { tnSAFlrTestResultsEntry 9 }
|
||
|
||
tnSAFlrTestResultsStepResult OBJECT-TYPE
|
||
SYNTAX TnSATestStepResult
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Step result."
|
||
::= { tnSAFlrTestResultsEntry 10 }
|
||
|
||
tnSAFlrTestResultsFrameSize OBJECT-TYPE
|
||
SYNTAX Unsigned32
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Frame size."
|
||
::= { tnSAFlrTestResultsEntry 11 }
|
||
|
||
tnSAFlrTestResultsOutOfSeqEvents OBJECT-TYPE
|
||
SYNTAX Unsigned32
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Out of sequence events."
|
||
::= { tnSAFlrTestResultsEntry 12 }
|
||
|
||
--
|
||
-- BackToBack Test Results
|
||
--
|
||
tnSABackToBackTestResultsTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF TnSABackToBackTestResultsEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Table for Back to Back Test Results."
|
||
::= { tnSaMIB 20 }
|
||
|
||
tnSABackToBackTestResultsEntry OBJECT-TYPE
|
||
SYNTAX TnSABackToBackTestResultsEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"An entry in the tnSABackToBackTestResultsTable."
|
||
INDEX {
|
||
tnSABackToBackTestResultsTestId,
|
||
tnSABackToBackTestResultsStepNumber
|
||
}
|
||
::= { tnSABackToBackTestResultsTable 1 }
|
||
|
||
TnSABackToBackTestResultsEntry ::= SEQUENCE {
|
||
tnSABackToBackTestResultsTestId Unsigned32,
|
||
tnSABackToBackTestResultsStepNumber Unsigned32,
|
||
tnSABackToBackTestResultsDirection TnSATestDirection,
|
||
tnSABackToBackTestResultsActualRate Unsigned32,
|
||
tnSABackToBackTestResultsStepDuration Unsigned32,
|
||
tnSABackToBackTestResultsTxFrames Counter64,
|
||
tnSABackToBackTestResultsRxGreenFrames Counter64,
|
||
tnSABackToBackTestResultsRxYellowFrames Counter64,
|
||
tnSABackToBackTestResultsFlr Unsigned32,
|
||
tnSABackToBackTestResultsStepResult TnSATestStepResult,
|
||
tnSABackToBackTestResultsBurstSize Unsigned32
|
||
}
|
||
|
||
tnSABackToBackTestResultsTestId OBJECT-TYPE
|
||
SYNTAX Unsigned32 (1..65535)
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The report Test ID."
|
||
::= { tnSABackToBackTestResultsEntry 1 }
|
||
|
||
tnSABackToBackTestResultsStepNumber OBJECT-TYPE
|
||
SYNTAX Unsigned32
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Test step number."
|
||
::= { tnSABackToBackTestResultsEntry 2 }
|
||
|
||
tnSABackToBackTestResultsDirection OBJECT-TYPE
|
||
SYNTAX TnSATestDirection
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The report direction."
|
||
::= { tnSABackToBackTestResultsEntry 3 }
|
||
|
||
tnSABackToBackTestResultsActualRate OBJECT-TYPE
|
||
SYNTAX Unsigned32
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Actual rate in Kbps."
|
||
::= { tnSABackToBackTestResultsEntry 4 }
|
||
|
||
tnSABackToBackTestResultsStepDuration OBJECT-TYPE
|
||
SYNTAX Unsigned32
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Step duration in seconds."
|
||
::= { tnSABackToBackTestResultsEntry 5 }
|
||
|
||
tnSABackToBackTestResultsTxFrames OBJECT-TYPE
|
||
SYNTAX Counter64
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Transmitted frames."
|
||
::= { tnSABackToBackTestResultsEntry 6 }
|
||
|
||
tnSABackToBackTestResultsRxGreenFrames OBJECT-TYPE
|
||
SYNTAX Counter64
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Received green frames."
|
||
::= { tnSABackToBackTestResultsEntry 7 }
|
||
|
||
tnSABackToBackTestResultsRxYellowFrames OBJECT-TYPE
|
||
SYNTAX Counter64
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Received yellow frames."
|
||
::= { tnSABackToBackTestResultsEntry 8 }
|
||
|
||
tnSABackToBackTestResultsFlr OBJECT-TYPE
|
||
SYNTAX Unsigned32
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Calculated frame loss ratio."
|
||
::= { tnSABackToBackTestResultsEntry 9 }
|
||
|
||
tnSABackToBackTestResultsStepResult OBJECT-TYPE
|
||
SYNTAX TnSATestStepResult
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Step result."
|
||
::= { tnSABackToBackTestResultsEntry 10 }
|
||
|
||
tnSABackToBackTestResultsBurstSize OBJECT-TYPE
|
||
SYNTAX Unsigned32
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Burts size."
|
||
::= { tnSABackToBackTestResultsEntry 11 }
|
||
|
||
--
|
||
-- Save Report
|
||
--
|
||
tnSAsaveRptTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF TnSAsaveRptEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Table for saving results report to a file."
|
||
::= { tnSaMIB 21 }
|
||
|
||
tnSAsaveRptEntry OBJECT-TYPE
|
||
SYNTAX TnSAsaveRptEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"An entry in the tnSAsaveRptTable."
|
||
INDEX {
|
||
entPhysicalIndex,
|
||
}
|
||
::= { tnSAsaveRptTable 1 }
|
||
|
||
TnSAsaveRptEntry ::= SEQUENCE {
|
||
tnSAsaveRptNumber Unsigned32,
|
||
tnSAsaveRptHostType InetAddressType,
|
||
tnSAsaveRptHostName InetAddress,
|
||
tnSAsaveRptFileName DisplayString,
|
||
tnSAsaveRpt Unsigned32
|
||
}
|
||
|
||
tnSAsaveRptNumber OBJECT-TYPE
|
||
SYNTAX Unsigned32 (1..16)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The report Test ID."
|
||
::= { tnSAsaveRptEntry 1 }
|
||
|
||
tnSAsaveRptHostType OBJECT-TYPE
|
||
SYNTAX InetAddressType
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION "The IP address type of the device.
|
||
For a detailed description of this type, please refer to INET-ADDRESS-MIB."
|
||
::= { tnSAsaveRptEntry 2 }
|
||
|
||
tnSAsaveRptHostName OBJECT-TYPE
|
||
SYNTAX InetAddress
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION "The IP address of the device.
|
||
For a detailed description of this type, please refer to INET-ADDRESS-MIB."
|
||
::= { tnSAsaveRptEntry 3 }
|
||
|
||
tnSAsaveRptFileName OBJECT-TYPE
|
||
SYNTAX DisplayString
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION "Name of text file to save the test results."
|
||
::= { tnSAsaveRptEntry 4 }
|
||
|
||
tnSAsaveRpt OBJECT-TYPE
|
||
SYNTAX Unsigned32
|
||
{
|
||
doNothing(0),
|
||
save(1)
|
||
}
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION "Save the test results in a text file. The text file is saved asynchronously after which
|
||
the value of tnSAsaveRpt is returned to doNothing(0).
|
||
The file is saved in under 5 seconds."
|
||
::= { tnSAsaveRptEntry 5 }
|
||
|
||
END
|