mibs/MIBS/transition/TN-SAT-LOOPBACK-MIB
2023-12-05 12:25:34 +01:00

175 lines
5.4 KiB
Plaintext

-- ***********************************************************************************************
-- TN-SAT-LOOPBACK-MIB.smi: Transition Networks, Inc. Enterprise MIB for
-- Ethernet SAT Loopback management.
--
-- Copyright (c) 2013 by Transition Networks, Inc.
-- All rights reserved.
--
-- ***********************************************************************************************
--
TN-SAT-LOOPBACK-MIB DEFINITIONS ::= BEGIN
IMPORTS
Unsigned32, Counter64
FROM SNMPv2-SMI
TruthValue, MacAddress
FROM SNMPv2-TC
IEEE8021BridgePortNumberOrZero, IEEE8021VlanIndexOrWildcard
FROM IEEE8021-TC-MIB
tnProducts
FROM TRANSITION-SMI;
tnEthSatLoopbackMIB MODULE-IDENTITY
LAST-UPDATED "201303120000Z"
ORGANIZATION "Transition Networks, Inc."
CONTACT-INFO
"Transition Networks
Technical Support
10900 Red Circle Drive
Minnetonka, MN 55343 USA
Tel: +1-800-526-9267
E-mail: techsupport@transition.com"
DESCRIPTION
"This MIB is related to the management of SAT Loopback."
REVISION "201303120000Z"
DESCRIPTION
"Defined in Mar 12th, 2013."
::= { tnProducts 130 }
tnEthSatLoopbackMIBNotifications OBJECT IDENTIFIER ::= { tnEthSatLoopbackMIB 0 }
tnEthSatLoopbackMIBObject OBJECT IDENTIFIER ::= { tnEthSatLoopbackMIB 1 }
tnEthSatLoopbackMIBConformance OBJECT IDENTIFIER ::= { tnEthSatLoopbackMIB 2 }
tnEthSatLoopBackCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF TnEthSatLoopBackCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table defines the management of SAT Loopback."
::= { tnEthSatLoopbackMIBObject 1 }
tnEthSatLoopBackCfgEntry OBJECT-TYPE
SYNTAX TnEthSatLoopBackCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the entry of SAT Loopback table."
INDEX { tnEthSatLoopBackIndex }
::= { tnEthSatLoopBackCfgTable 1 }
TnEthSatLoopBackCfgEntry ::=
SEQUENCE {
tnEthSatLoopBackIndex Unsigned32,
tnEthSatLoopBackEnabled TruthValue,
tnEthSatLoopBackPort IEEE8021BridgePortNumberOrZero,
tnEthSatLoopBackAddress MacAddress,
tnEthSatLoopBackVid IEEE8021VlanIndexOrWildcard,
tnEthSatLoopBackTimeOut Unsigned32
}
tnEthSatLoopBackIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the index of table entry."
::= { tnEthSatLoopBackCfgEntry 1 }
tnEthSatLoopBackEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the current status of SAT Loopback.
true means the Loopback is active, else inactive"
::= { tnEthSatLoopBackCfgEntry 2 }
tnEthSatLoopBackPort OBJECT-TYPE
SYNTAX IEEE8021BridgePortNumberOrZero
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the test port where Loopback will be enabled."
::= { tnEthSatLoopBackCfgEntry 3 }
tnEthSatLoopBackAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the source address to be matched."
::= { tnEthSatLoopBackCfgEntry 4 }
tnEthSatLoopBackVid OBJECT-TYPE
SYNTAX IEEE8021VlanIndexOrWildcard
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the VLAN ID to be matched."
::= { tnEthSatLoopBackCfgEntry 5 }
tnEthSatLoopBackTimeOut OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the timeout period in seconds for aging out
the active about the Loopback."
DEFVAL {300}
::= { tnEthSatLoopBackCfgEntry 6 }
tnEthSatLoopBackStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF TnEthSatLoopBackStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table defines the statistics information of SAT Loopback."
::= { tnEthSatLoopbackMIBObject 2 }
tnEthSatLoopBackStatsEntry OBJECT-TYPE
SYNTAX TnEthSatLoopBackStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the entry of SAT Loopback statistics table."
INDEX { tnEthSatLoopBackIndex }
::= { tnEthSatLoopBackStatsTable 1 }
TnEthSatLoopBackStatsEntry ::=
SEQUENCE {
tnEthSatLoopBackTimeLeft Unsigned32,
tnEthSatLoopBackFrames Counter64,
tnEthSatLoopBackBytes Counter64
}
tnEthSatLoopBackTimeLeft OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the remaining time left for aging out
the active about the Loopback."
::= { tnEthSatLoopBackStatsEntry 1 }
tnEthSatLoopBackFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the counter about the received frame. the unit is frame."
::= { tnEthSatLoopBackStatsEntry 2 }
tnEthSatLoopBackBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the counter about the received frame. the unit is bytes."
::= { tnEthSatLoopBackStatsEntry 3 }
END