mibs/MIBS/transition/TRANSITION-TC
2023-12-05 12:25:34 +01:00

167 lines
6.3 KiB
Plaintext

-- ***********************************************************************************************
-- TRANSITION-TC.my: Transition Networks Inc MIB Textual Conventions
--
-- Copyright (c) 2013 by Transition Networks, Inc.
-- All rights reserved.
--
-- ***********************************************************************************************
TRANSITION-TC DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
Gauge32, Integer32 FROM SNMPv2-SMI
TEXTUAL-CONVENTION FROM SNMPv2-TC
InetAddressType, InetAddress FROM INET-ADDRESS-MIB
tnModules FROM TRANSITION-SMI;
transitionTC MODULE-IDENTITY
LAST-UPDATED "201311210000Z"
ORGANIZATION "Transition Networks, Inc."
CONTACT-INFO
" Transition Networks
Technical Support
10900 Red Circle Drive
Minnetonka, MN 55343 USA
Tel: +1-800-526-9267
E-mail: techsupport@transition.com"
DESCRIPTION
"This module defines textual conventions used in the
transition enterprise mibs."
REVISION "201311210000Z"
DESCRIPTION
"Initial version, imports textual conventions from other standard mibs."
::= { tnModules 1 }
-- The types of connectors that can be built into a Point System converter.
-- No type of converter uses all of these connector types.
-- Some converters return 16 bit connector style values that contain additional
-- information on the connector in the upper byte. In these cases, the lower
-- byte is one of the values below.
CpsConnector ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
" This enumerates all the Transition networks supported media connectors."
SYNTAX INTEGER {
rj45(10), -- RJ-45, unshielded twisted pair
stmm(11), -- ST fiber, multimode
stsm(12), -- ST fiber, singlemode
scmm(13), -- SC fiber, multimode
scsm(14), -- SC fiber, singlemode
scsmlh(15), -- SC fiber, singlemode, long haul
scsmelh(16), -- SC fiber, singlemode, extra long haul
scsmlhlw(17), -- SC fiber, long haul, long wavelength
mtrjmm(18), -- MT-RJ multimode fiber
lc(19), -- LC fiber, singlemode
bnc(20), -- BNC coax
stsmlh(21), -- ST Singlemode Long Haul
stsmelh(22), -- ST Singlemode Extra Long Haul
scmm1300(23), -- SC Multimode 1300nm
stmm1300(24), -- ST Multimode 1300nm
mtrjsm(25), -- MTRJ singlemode fiber
serial26(26), -- Universal 26-pin Serial Interface Connector
stmmlh(27), -- ST Multimode Long Haul
scsmsh(28), -- SC Singlemode Short Haul
scsimplex(29), -- SC Simplex
bncdual(30), -- Dual BNC coax connectors
db9rsxxx(31), -- DB9 for RS232 and RS485
termblock(32), -- Terminal Block for RS485
rj11(33), -- RJ-11, unshielded twisted pair
sc40km(34), -- SC fiber, 1550nm 40km
sc125km(35), -- SC fiber, 1 x 9, 125km Gigiabit
din6(38), -- DIN 6-Pin for RS232
sfp(40) -- SFP cage
}
TNEthernetSpeed ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
" This enumerates all the Transition networks supported Ethernet speeds."
SYNTAX INTEGER {
mbps10(1),
mbps100(2),
gbps1(3),
gbps10(4),
mbps2500(5),
gbps5(6),
gbps12(7)
}
TNEthernetDuplex ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
" This enumerates all the Transition networks supported Ethernet interface duplex."
SYNTAX INTEGER {
halfDuplex(1),
fullDuplex(2)
}
TNEthernetAutoCross ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
" This enumerates all the Transition networks Ethernet Autocross values."
SYNTAX INTEGER {
mdi(1),
mdiX(2),
autocross(3),
notApplicable(4)
}
TNLoopbackModeCapBits ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This enumerates all the Transition networks loopback modes capability."
SYNTAX BITS {
unused(0),
phyLayerLBCapable(1),
macLayerLBCapable(2),
alternateLBCapable(3),
remotePeerLBCapable(4)
}
TNLoopbackModes ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This enumerates all the Transition networks loopback modes supported."
SYNTAX INTEGER {
noLoopback(0),
phyLayerLB(1),
macLayerLB(2),
alternateLB(3),
remotePeerLB(4)
}
TNVlanIndexOrZero ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The VLAN ID as VlanIndex as defined in Q-BRIDGE including zero.
If the value is between 1 and 4095 inclusive,
it represents an IEEE 802.1Q VLAN-ID.
If the value is zero, it is object-specific and
must therefore be defined as part of the
description of any object which uses this syntax."
SYNTAX INTEGER(0..4095)
TNEthPhyMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The different Ethernet PHY interfaces supported."
SYNTAX INTEGER {
unknown(0),
phy10x100BaseT(1),
phy100BaseFX(2),
phy1000BaseX(3),
phy10x100x1000BaseT(4),
phySGMII(5)
}
END